Branch point for 2019 Aug 30 Breaking Change

2019-07-05 11:08:18 -07:00
81 changed files with 530 additions and 1784 deletions
@@ -19,11 +19,9 @@ indent_size = 4
 # Make these match what we have in .gitattributes
 [*.mk]
 end_of_line = lf
-indent_style = tab

 [Makefile]
 end_of_line = lf
-indent_style = tab

 [*.sh]
 end_of_line = lf
@@ -133,7 +133,7 @@ ifeq ($(strip $(LED_MATRIX_ENABLE)), IS31FL3731)
    OPT_DEFS += -DIS31FL3731
    COMMON_VPATH += $(DRIVER_PATH)/issi
    SRC += is31fl3731-simple.c
-    QUANTUM_LIB_SRC += i2c_master.c
+    SRC += i2c_master.c
 endif

 RGB_MATRIX_ENABLE ?= no
@@ -157,21 +157,21 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
    OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
    COMMON_VPATH += $(DRIVER_PATH)/issi
    SRC += is31fl3731.c
-    QUANTUM_LIB_SRC += i2c_master.c
+    SRC += i2c_master.c
 endif

 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
    OPT_DEFS += -DIS31FL3733 -DSTM32_I2C -DHAL_USE_I2C=TRUE
    COMMON_VPATH += $(DRIVER_PATH)/issi
    SRC += is31fl3733.c
-    QUANTUM_LIB_SRC += i2c_master.c
+    SRC += i2c_master.c
 endif

 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3737)
    OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE
    COMMON_VPATH += $(DRIVER_PATH)/issi
    SRC += is31fl3737.c
-    QUANTUM_LIB_SRC += i2c_master.c
+    SRC += i2c_master.c
 endif

 ifeq ($(strip $(RGB_MATRIX_ENABLE)), WS2812)
@@ -271,7 +271,7 @@ ifeq ($(strip $(HAPTIC_ENABLE)), DRV2605L)
    COMMON_VPATH += $(DRIVER_PATH)/haptic
    SRC += haptic.c
    SRC += DRV2605L.c
-    QUANTUM_LIB_SRC += i2c_master.c
+    SRC += i2c_master.c
    OPT_DEFS += -DHAPTIC_ENABLE
    OPT_DEFS += -DDRV2605L
 endif
@@ -14,7 +14,7 @@ Tested combinations:

 Hardware configurations using ARM-based microcontrollers or different sizes of OLED modules may be compatible, but are untested.

-!> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses I2C to communicate between sides, this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. In addition, the display timeout system to reduce OLED burn-in also uses split common to detect keypresses, so you will need to implement custom timeout logic for non-split common keyboards.
+!> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses i2c to communication between sides this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. 

 ## Usage

@@ -43,7 +43,6 @@ By default Space Cadet assumes a US ANSI layout, but if your layout uses differe
 |`LAPO_KEYS`     |`KC_LALT, KC_LSFT, KC_9`       |Send `KC_LALT` when held, the mod `KC_LSFT` with the key `KC_9` when tapped.     |
 |`RAPC_KEYS`     |`KC_RALT, KC_RSFT, KC_0`       |Send `KC_RALT` when held, the mod `KC_RSFT` with the key `KC_0` when tapped.     |
 |`SFTENT_KEYS`   |`KC_RSFT, KC_TRNS, SFTENT_KEY` |Send `KC_RSFT` when held, no mod with the key `SFTENT_KEY` when tapped.          |
-|`SPACE_CADET_MODIFIER_CARRYOVER`   |*Not defined* |Store current modifiers before the hold mod is pressed and use them with the tap mod and keycode. Useful for when you frequently release a modifier before triggering Space Cadet.  |


 ## Obsolete Configuration
@@ -2,7 +2,9 @@ ifneq ($(strip $(QWIIC_ENABLE)),)
  COMMON_VPATH += $(DRIVER_PATH)/qwiic
  OPT_DEFS += -DQWIIC_ENABLE
  SRC += qwiic.c
-  QUANTUM_LIB_SRC += i2c_master.c
+  ifeq ($(filter "i2c_master.c", $(SRC)),)
+    SRC += i2c_master.c
+  endif
 endif

 ifneq ($(filter JOYSTIIC, $(QWIIC_ENABLE)),)
@@ -1,13 +0,0 @@
-#pragma once
-
-#undef RGB_DI_PIN
-#undef RGBLED_NUM
-#define RGB_DI_PIN D3
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 10
-
-/* Make layout upside down = USB port on left side */
-#undef MATRIX_ROW_PINS
-#undef MATRIX_COL_PINS
-#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
-#define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B4 }
@@ -1,8 +0,0 @@
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = LAYOUT_ortho_3x10(KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(1, KC_ENT), LSFT_T(KC_Z), LALT_T(KC_X), LGUI_T(KC_C), KC_V, KC_BSPC, KC_SPC, RGUI_T(KC_B), LT(3, KC_N), LT(2, KC_M), KC_RSFT),
-	[1] = LAYOUT_ortho_3x10(KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT),
-	[2] = LAYOUT_ortho_3x10(KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LBRC, KC_NO, KC_SCLN, KC_NO, KC_QUOT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT),
-	[3] = LAYOUT_ortho_3x10(KC_TAB, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO)
-};
@@ -1,3 +0,0 @@
-BACKLIGHT_ENABLE = no
-AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = yes
@@ -1,3 +0,0 @@
-# Vxid crkbd layout
-
-Inspired by sdothum's wide planck layout.
@@ -1,44 +0,0 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <[email protected]>
-Copyright 2015 Jack Humbert
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-//#define USE_MATRIX_I2C
-
-/* Select hand configuration */
-
-// #define MASTER_LEFT
-#define MASTER_RIGHT
-// #define EE_HANDS
-
-#define SSD1306OLED
-
-#define USE_SERIAL_PD2
-
-#define TAPPING_FORCE_HOLD
-#define TAPPING_TERM 100
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 27
-#define RGBLIGHT_LIMIT_VAL 120
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
@@ -1,85 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "bootloader.h"
-#ifdef PROTOCOL_LUFA
-  #include "lufa.h"
-  #include "split_util.h"
-#endif
-
-extern keymap_config_t keymap_config;
-
-extern uint8_t is_master;
-
-#define _QWERTY 0
-#define _LOWER 1
-#define _RAISE 2
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE
-};
-
-#define KC______ KC_TRNS
-#define KC_XXXXX KC_NO
-#define KC_LOWER LOWER
-#define KC_RAISE RAISE
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,-----------------------------------------.
-          Q,     W,     E,     R,     T,   ESC,                    DEL,     Y,     U,     I,     O,     P,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-          A,     S,     D,     F,     G,   SPC,                   BSPC,     H,     J,     K,     L,  SCLN,\
-  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
-          Z,     X,     C,     V,     B,   TAB,                    ENT,     N,     M,  COMM,   DOT,  SLSH,\
-  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
-                                   LALT,  LGUI,  LCTL,     LSFT, RAISE, LOWER \
-                              //`--------------------'  `--------------------'
-  ),
-
-  [_LOWER] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,------------------------------------------.
-          1,     2,     3,     4,     5, XXXXX,                   XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
-  //|------+------+------+------+------+------|                |-------+------+------+------+------+------|
-          6,     7,     8,     9,     0, XXXXX,                   XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
-  //|------+------+------+------+------+------|                |-------+------+------+------+------+------|
-        EQL,  PLUS,  MINS,  SLSH,  ASTR, XXXXX,                   XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
-  //|------+------+------+------+------+------+------|  |------+-------+------+------+------+------+------|
-                                   LALT,  LGUI,  LCTL,     LSFT, RAISE, LOWER \
-                              //`--------------------'  `--------------------'
-  ),
-
-  [_RAISE] = LAYOUT_kc( \
-  //,-----------------------------------------.                ,------------------------------------------.
-       EXLM,    AT,  HASH,   DLR,  PERC,  LPRN,                    RPRN, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
-  //|------+------+------+------+------+------|                |-------+------+------+------+------+------|
-       CIRC,  AMPR,  ASTR,  QUOT,  DQUO,  LCBR,                    RCBR,  LEFT,  DOWN,    UP, RIGHT, XXXXX,\
-  //|------+------+------+------+------+------|                |-------+------+------+------+------+------|
-       BSLS,  TILD,   GRV,  UNDS,  PIPE,  LBRC,                    RBRC, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
-  //|------+------+------+------+------+------+------|  |------+-------+------+------+------+------+------|
-                                   LALT,  LGUI,  LCTL,     LSFT, RAISE, LOWER \
-                              //`--------------------'  `--------------------'
-  )
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-      } else {
-        layer_off(_LOWER);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-      } else {
-        layer_off(_RAISE);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
@@ -1,31 +0,0 @@
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
-SWAP_HANDS_ENABLE = no      # Enable one-hand typing
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-# If you want to change the display of OLED, you need to change here
-SRC +=  ./lib/glcdfont.c \
-        ./lib/rgb_state_reader.c \
-        ./lib/layer_state_reader.c \
-        ./lib/logo_reader.c \
-        ./lib/keylogger.c \
-        # ./lib/mode_icon_reader.c \
-        # ./lib/host_led_state_reader.c \
-        # ./lib/timelogger.c \
@@ -16,7 +16,6 @@

 # # project specific files
 SRC += matrix.c
-QUANTUM_LIB_SRC += i2c_master.c

 # MCU name
 MCU = atmega32u4
@@ -86,4 +85,9 @@ RGBLIGHT_ENABLE = yes
 RGB_MATRIX_ENABLE = no # enable later
 DEBOUNCE_TYPE = eager_pr

+ifeq ($(strip $(RGB_MATRIX_ENABLE)), no)
+  SRC += i2c_master.c
+endif
+
+
 LAYOUTS = ergodox
@@ -117,117 +117,6 @@
      ]
    },

-    "LAYOUT_split_bs_joined_right": {
-      "key_count": 100,
-      "layout": [
-        {"label": "K00", "x": 0, "y": 0},
-        {"label": "K01", "x": 1, "y": 0},
-        {"label": "K02", "x": 2, "y": 0},
-        {"label": "K03", "x": 3, "y": 0},
-        {"label": "K04", "x": 4, "y": 0},
-        {"label": "K60", "x": 5, "y": 0},
-        {"label": "K61", "x": 6, "y": 0},
-        {"label": "K62", "x": 7, "y": 0},
-        {"label": "K63", "x": 8, "y": 0},
-        {"label": "K05", "x": 9, "y": 0},
-        {"label": "K06", "x": 10, "y": 0},
-        {"label": "K07", "x": 11, "y": 0},
-        {"label": "K08", "x": 12, "y": 0},
-        {"label": "K72", "x": 13, "y": 0},
-        {"label": "K09", "x": 14, "y": 0},
-        {"label": "K0A", "x": 15, "y": 0},
-        {"label": "K0B", "x": 16, "y": 0},
-        {"label": "K0C", "x": 17, "y": 0},
-        {"label": "K7C", "x": 18, "y": 0},
-
-        {"label": "K10", "x": 0, "y": 1},
-        {"label": "K11", "x": 1, "y": 1},
-        {"label": "K12", "x": 2, "y": 1},
-        {"label": "K13", "x": 3, "y": 1},
-        {"label": "K14", "x": 4, "y": 1},
-        {"label": "K64", "x": 5, "y": 1},
-        {"label": "K65", "x": 6, "y": 1},
-        {"label": "K66", "x": 7, "y": 1},
-        {"label": "K67", "x": 8, "y": 1},
-        {"label": "K15", "x": 9, "y": 1},
-        {"label": "K16", "x": 10, "y": 1},
-        {"label": "K17", "x": 11, "y": 1},
-        {"label": "K18", "x": 12, "y": 1},
-        {"label": "K70", "x": 13, "y": 1},
-        {"label": "K71", "x": 14, "y": 1},
-        {"label": "K19", "x": 15, "y": 1},
-        {"label": "K1A", "x": 16, "y": 1},
-        {"label": "K1B", "x": 17, "y": 1},
-        {"label": "K1C", "x": 18, "y": 1},
-
-        {"label": "K20", "x": 0, "y": 2, "w": 1.5},
-        {"label": "K21", "x": 1.5, "y": 2},
-        {"label": "K22", "x": 2.5, "y": 2},
-        {"label": "K23", "x": 3.5, "y": 2},
-        {"label": "K24", "x": 4.5, "y": 2},
-        {"label": "K68", "x": 5.5, "y": 2},
-        {"label": "K69", "x": 6.5, "y": 2},
-        {"label": "K6A", "x": 7.5, "y": 2},
-        {"label": "K6B", "x": 8.5, "y": 2},
-        {"label": "K25", "x": 9.5, "y": 2},
-        {"label": "K26", "x": 10.5, "y": 2},
-        {"label": "K27", "x": 11.5, "y": 2},
-        {"label": "K28", "x": 12.5, "y": 2},
-        {"label": "K73", "x": 13.5, "y": 2, "w": 1.5},
-        {"label": "K29", "x": 15, "y": 2},
-        {"label": "K2A", "x": 16, "y": 2},
-        {"label": "K2B", "x": 17, "y": 2},
-        {"label": "K2C", "x": 18, "y": 2, "h": 2},
-
-        {"label": "K30", "x": 0, "y": 3, "w": 1.75},
-        {"label": "K31", "x": 1.75, "y": 3},
-        {"label": "K32", "x": 2.75, "y": 3},
-        {"label": "K33", "x": 3.75, "y": 3},
-        {"label": "K34", "x": 4.75, "y": 3},
-        {"label": "K6C", "x": 5.75, "y": 3},
-        {"label": "K75", "x": 6.75, "y": 3},
-        {"label": "K76", "x": 7.75, "y": 3},
-        {"label": "K77", "x": 8.75, "y": 3},
-        {"label": "K35", "x": 9.75, "y": 3},
-        {"label": "K36", "x": 10.75, "y": 3},
-        {"label": "K37", "x": 11.75, "y": 3},
-        {"label": "K38", "x": 12.75, "y": 3, "w": 2.25},
-        {"label": "K39", "x": 15, "y": 3},
-        {"label": "K3A", "x": 16, "y": 3},
-        {"label": "K3B", "x": 17, "y": 3},
-
-        {"label": "K40", "x": 0, "y": 4, "w": 2.25},
-        {"label": "K42", "x": 2.25, "y": 4},
-        {"label": "K43", "x": 3.25, "y": 4},
-        {"label": "K44", "x": 4.25, "y": 4},
-        {"label": "K78", "x": 5.25, "y": 4},
-        {"label": "K79", "x": 6.25, "y": 4},
-        {"label": "K7A", "x": 7.25, "y": 4},
-        {"label": "K7B", "x": 8.25, "y": 4},
-        {"label": "K45", "x": 9.25, "y": 4},
-        {"label": "K46", "x": 10.25, "y": 4},
-        {"label": "K47", "x": 11.25, "y": 4},
-        {"label": "K48", "x": 12.25, "y": 4, "w": 1.75},
-        {"label": "K74", "x": 14, "y": 4},
-        {"label": "K49", "x": 15, "y": 4},
-        {"label": "K4A", "x": 16, "y": 4},
-        {"label": "K4B", "x": 17, "y": 4},
-        {"label": "K4C", "x": 18, "y": 4, "h": 2},
-
-        {"label": "K50", "x": 0, "y": 5, "w": 1.25},
-        {"label": "K51", "x": 1.25, "y": 5, "w": 1.25},
-        {"label": "K52", "x": 2.5, "y": 5, "w": 1.25},
-        {"label": "K59", "x": 3.75, "y": 5, "w": 6.25},
-        {"label": "K55", "x": 10, "y": 5, "w": 1.5},
-        {"label": "K57", "x": 11.5, "y": 5, "w": 1.5},
-        {"label": "K58", "x": 13, "y": 5},
-        {"label": "K53", "x": 14, "y": 5},
-        {"label": "K54", "x": 15, "y": 5},
-        {"label": "K5A", "x": 16, "y": 5},
-        {"label": "K5B", "x": 17, "y": 5}
-      ]
-    },
-
    "LAYOUT_split_shift_and_bs": {
      "key_count": 104,
      "layout": [
@@ -101,7 +101,7 @@
    },
    "",
    "UP",
-    "PrtScr",
+    "",
    "H",
    "J",
    "K",
@@ -182,9 +182,9 @@
      "c": "#cccccc",
      "t": "#000000"
    },
-    "Left",
-    "Down",
-    "Up",
-    "Right"
+    "",
+    "",
+    "",
+    "PrtScr"
  ]
 ]
@@ -1,38 +1,40 @@
 #include QMK_KEYBOARD_H

-enum custom_keycodes {
-  LOWER = SAFE_RANGE,
-  RAISE,
-};
+extern keymap_config_t keymap_config;

-enum layer_names {
-  _QWERTY,
-  _LOWER,
-  _RAISE,
-  _ADJUST,
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
 };

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

 /* QWERTY
 * .--------------------------------------------------------------------------------------------------------------------------------------.
- * | ESC    | 1      | 2      | 3      | 4      | 5      | =      |        | -      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | -      |        | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
 * | TAB    | Q      | W      | E      | R      | T      |        |        | [      | Y      | U      | I      | O      | P      | ]      |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
- * | RAISE  | A      | S      | D      | F      | G      |        | UP     | PrtScr | H      | J      | K      | L      | ;      | '      |
+ * | RAISE  | A      | S      | D      | F      | G      |        | UP     |        | H      | J      | K      | L      | ;      | '      |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
 * | LSHIFT | Z      | X      | C      | V      | B      | LEFT   | DOWN   | RIGHT  | N      | M      | ,      | .      | /      | RSHIFT |
 * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
- * | `      | \      | LALT   | LCTRL  | LOWER  | SPACE  | LGUI   | DEL    | ENTER  | SPACE  | RAISE  |  LEFT  |  DOWN  |  UP    | RIGHT  |
+ * | `      | \      | LALT   | LCTRL  | LOWER  | SPACE  | LGUI   | DEL    | ENTER  | SPACE  | RAISE  |        |        |        | PrtScr |
 * '--------------------------------------------------------------------------------------------------------------------------------------'
 */
-[_QWERTY] = LAYOUT_ortho_5x15( 
-    KC_ESC,     KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_EQL,  XXXXXXX,   KC_MINS,   KC_6,    KC_7,    KC_8,       KC_9,     KC_0, KC_BSPC,  
-    KC_TAB,     KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    XXXXXXX, XXXXXXX,   KC_LBRC,   KC_Y,    KC_U,    KC_I,       KC_O,     KC_P, KC_RBRC,  
-     RAISE,     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    XXXXXXX,   KC_UP,   KC_PSCR,   KC_H,    KC_J,    KC_K,       KC_L,  KC_SCLN, KC_QUOT, 
-   KC_LSFT,     KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LEFT, KC_DOWN,   KC_RGHT,   KC_N,    KC_M,    KC_COMM,  KC_DOT,  KC_SLSH, KC_RSFT, 
-  KC_GRAVE,  KC_BSLS, KC_LALT, KC_LCTL,   LOWER,  KC_SPC,    KC_LGUI,  KC_DEL,    KC_ENT, KC_SPC,   RAISE,    KC_LEFT,  KC_DOWN,   KC_UP, KC_RGHT  
+[_QWERTY] = LAYOUT_ortho_5x15( \
+    KC_ESC,     KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS, XXXXXXX,    KC_EQL,   KC_6,    KC_7,    KC_8,       KC_9,     KC_0, KC_BSPC,  \
+    KC_TAB,     KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    XXXXXXX, XXXXXXX,   KC_LBRC,   KC_Y,    KC_U,    KC_I,       KC_O,     KC_P, KC_RBRC,  \
+     RAISE,     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    XXXXXXX,   KC_UP,   XXXXXXX,   KC_H,    KC_J,    KC_K,       KC_L,  KC_SCLN, KC_QUOT, \
+   KC_LSFT,     KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LEFT, KC_DOWN,   KC_RGHT,   KC_N,    KC_M,    KC_COMM,  KC_DOT,  KC_SLSH, KC_RSFT, \
+  KC_GRAVE, KC_GRAVE, KC_LALT, KC_LCTL,   LOWER,  KC_SPC,    KC_LGUI,  KC_DEL,    KC_ENT, KC_SPC,   RAISE,    XXXXXXX, XXXXXXX,  XXXXXXX, KC_PSCR  \
 ),


@@ -49,12 +51,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * |        |        |        |        | LOWER  |        |  APP   |        |        |        |  RAISE |        |        |        |        |
 * '--------------------------------------------------------------------------------------------------------------------------------------'
 */
-[_LOWER] = LAYOUT_ortho_5x15( 
-    XXXXXXX,   KC_F1,   KC_F2,   KC_F3, XXXXXXX,   KC_F5, XXXXXXX, XXXXXXX, XXXXXXX,    KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10, XXXXXXX,  
-    XXXXXXX, XXXXXXX,   KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  
-      RAISE, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   LOWER, XXXXXXX,  KC_APP, XXXXXXX, XXXXXXX,  XXXXXXX,   RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  
+[_LOWER] = LAYOUT_ortho_5x15( \
+    XXXXXXX,   KC_F1,   KC_F2,   KC_F3, XXXXXXX,   KC_F5, XXXXXXX, XXXXXXX, XXXXXXX,    KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10, XXXXXXX,  \
+    XXXXXXX, XXXXXXX,   KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  \
+      RAISE, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   LOWER, XXXXXXX,  KC_APP, XXXXXXX, XXXXXXX,  XXXXXXX,   RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  \
 ),

 /* RAISE
@@ -70,12 +72,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * |        |        |        |        | LOWER  |        |        |        |        |        |  RAISE |        |        |        |        |
 * '--------------------------------------------------------------------------------------------------------------------------------------'
 */
-[_RAISE] = LAYOUT_ortho_5x15( 
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  
-    XXXXXXX, XXXXXXX,   KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  
-      RAISE, KC_HOME, KC_PGDN,  KC_END, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   LOWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,   RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  
+[_RAISE] = LAYOUT_ortho_5x15( \
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  \
+    XXXXXXX, XXXXXXX,   KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  \
+      RAISE, KC_HOME, KC_PGDN,  KC_END, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   LOWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,   RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  \
 ),


@@ -92,12 +94,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 * |        |        |        |        | LOWER  |        |        |        |        |        |  RAISE |        |        |        |        |
 * '--------------------------------------------------------------------------------------------------------------------------------------'
 */
-[_ADJUST] = LAYOUT_ortho_5x15( 
-    RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  RGB_M_P, RGB_M_T, RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX,  
-  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_TOG, BL_TOGG, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  
-    RAISE, XXXXXXX, RGB_HUI, RGB_SAI, RGB_VAI,  BL_INC, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-  EEP_RST, XXXXXXX, RGB_HUD, RGB_SAD, RGB_VAD,  BL_DEC, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   LOWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,   RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  
+[_ADJUST] = LAYOUT_ortho_5x15( \
+    RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  RGB_M_P, RGB_M_T, RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX,  \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_TOG, BL_TOGG, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  \
+    RAISE, XXXXXXX, RGB_HUI, RGB_SAI, RGB_VAI,  BL_INC, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+  EEP_RST, XXXXXXX, RGB_HUD, RGB_SAD, RGB_VAD,  BL_DEC, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   LOWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,   RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  \
 ),


@@ -114,6 +116,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
+      break;
    case RAISE:
      if (record->event.pressed) {
        layer_on(_RAISE);
@@ -123,6 +126,15 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
        update_tri_layer(_LOWER, _RAISE, _ADJUST);
      }
      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
  }
  return true;
 }
@@ -1,5 +1,3 @@
 # GreenShadowMaker keymap for idobo

-make idobo:greenshadowmaker:dfu
-
 Note: keyboard-layout-editor-gsm-idobo.json shoudl be the matching layout for http://www.keyboard-layout-editor.com
@@ -56,20 +56,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
     * │   │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│PSc│Ins│
     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
-     * │     │Hom│ ↑ │End│PgU│   │   │   │   │M3 │M1 │M↑ │M2 │ Del │
+     * │     │Hom│ ↑ │End│PgU│   │   │   │   │M1 │M↑ │M3 │M2 │ Del │
     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
-     * │      │ ← │ ↓ │ → │PgD│   │   │   │   │MW↑│M← │M→ │        │
+     * │      │ ← │ ↓ │ → │PgD│   │   │   │MW↑│M← │M↓ │M→ │        │
     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
-     * │        │Mut│Vo-│Vo+│Ply│Prv│Nxt│App│MW←│MW→│M↓ │      │   │
+     * │        │Mut│Vo-│Vo+│Ply│Prv│Nxt│MW←│MW→│M4 │M5 │      │   │
     * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
     *       │   │     │            MW↓            │MAcl2│   │
     *       └───┴─────┴───────────────────────────┴─────┴───┘
     */
    [L_FN] = LAYOUT(
        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,
-        _______, KC_HOME, KC_UP,   KC_END,  KC_PGUP, _______, _______, _______, _______, KC_BTN3, KC_BTN1, KC_MS_U, KC_BTN2, KC_DEL,
-        _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, _______, KC_WH_U, KC_MS_L, KC_MS_R, _______,
-        _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_APP,  KC_WH_L, KC_WH_R, KC_MS_D, _______, _______,
+        _______, KC_HOME, KC_UP,   KC_END,  KC_PGUP, _______, _______, _______, _______, KC_BTN1, KC_MS_U, KC_BTN3, KC_BTN2, KC_DEL,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, _______,
+        _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_WH_L, KC_WH_R, KC_BTN4, KC_BTN5, _______, _______,
        XXXXXXX, _______, _______,                   KC_WH_D,                   KC_ACL2, _______, XXXXXXX
    ),

@@ -81,7 +81,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
     * │      │Mv←│Mv↓│Mv→│TNx│   │   │   │   │   │   │   │        │
     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
-     * │        │RTg│RV-│RV+│   │   │   │   │M4 │M5 │   │      │   │
+     * │        │RTg│RV-│RV+│   │   │   │   │   │   │   │      │   │
     * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
     *       │DPR│DstNA│                           │     │   │
     *       └───┴─────┴───────────────────────────┴─────┴───┘
@@ -90,7 +90,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLEAR,
        _______, TOP,     MV_UP,   BOTTOM,  TAB_PRV, _______, _______, _______, _______, _______, _______, _______, _______, DEL_NXT,
        _______, MV_LEFT, MV_DOWN, MV_RGHT, TAB_NXT, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, RGB_TOG, RGB_VAD, RGB_VAI, _______, _______, _______, _______, KC_BTN4, KC_BTN5, _______, _______, _______,
+        _______, RGB_TOG, RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______,
        XXXXXXX, DST_P_R, DST_N_A,                   _______,                   _______, _______, XXXXXXX
    ),
 };
@@ -1,25 +0,0 @@
-/*
-Copyright 2017 Danny Nguyen <[email protected]>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-// #define USE_I2C
-#define EE_HANDS
-
-#undef RGBLED_NUM
-
-#define RGBLED_NUM 12
@@ -1,44 +0,0 @@
-#include QMK_KEYBOARD_H
-
-
-enum layer_names {
-    _QWERTY,
-    _LOWER,
-    _RAISE,
-    _ADJUST
-};
-
-
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  [_QWERTY] = LAYOUT(
-  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
-     KC_GESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                               KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
-  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
-     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                               KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
-  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
- KC_CAPSLOCK, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                               KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-     KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LBRACKET,  KC_RBRACKET,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
-  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
-                                    KC_LALT, KC_LGUI,   KC_ENT,              MO(_LOWER),  KC_SPC,   KC_RALT
-                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
-  ),
-
-  [_LOWER] = LAYOUT(
-  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
-     _______, _______, _______, _______, _______, _______,                            _______, _______, _______, _______, _______, _______,
-  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
-     _______, _______, _______, _______, _______, _______,                            _______, _______, KC_UP, _______, _______, _______,
-  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
-     _______, _______, _______, _______, _______, KC_LCBR,                            KC_RCBR, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______,
-  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-     _______, _______, _______, _______, _______, KC_LPRN, _______,          _______, KC_RPRN, _______, _______, _______, _______, _______,
-  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
-                                    _______, _______, _______,                   _______, _______, _______
-                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
-  )
-};
-
@@ -1 +0,0 @@
-RGBLIGHT_ENABLE = yes
@@ -1,28 +0,0 @@
-/*
-Copyright 2017 Danny Nguyen <[email protected]>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-// #define USE_I2C
-#define EE_HANDS
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 12
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
@@ -1,50 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "mattly.h"
-
-// extern keymap_config_t keymap_config;
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  [_QWERTY] = LAYOUT(
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                               KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                               KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_SCLN,
-    KC_CAPS, A_CTRL,  S_ALT,   D_GUI,   F_SHFT,  KC_G,                               KC_H,    J_SHFT,  K_GUI,   L_ALT,   MINSCTL, KC_QUOT,
-    XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    SPC_SFT,         BSP_NUM,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
-                                   ESC_HYP, BSP_NUM, ENT_SFT,                   SPC_SFT, TAB_SYM, DEL_WRP
-  ),
-
-  [_SYMBOL] = LAYOUT(
-    _______, _______, _______, _______, _______, _______,                            _______, _______, _______, _______, _______, _______,
-    _______, KC_AMPR, KC_GRV,  KC_TILD, KC_LBRC, KC_RBRC,                            KC_LABK, KC_RABK, KC_PLUS, KC_ASTR, XXXXXXX, _______,
-    _______, KC_DLR,  KC_PERC, KC_EQL,  KC_LPRN, KC_RPRN,                            KC_SCLN, KC_COLN, KC_EXLM, KC_AT,   KC_UNDS, _______,
-    RESET,   XXXXXXX, KC_CIRC, KC_HASH, KC_LCBR, KC_RCBR, _______,          _______, KC_QUOT, KC_DQUO, KC_PIPE, KC_BSLS, KC_QUES, _______,
-                                  _______, _______, _______,                     _______, _______, _______
-  ),
-
-  [_NAVNUM] = LAYOUT(
-    XNOTIFY, XXXXXXX, XPRVSPC, NWIN,    XNXTSPC, XXXXXXX,                            XXXXXXX, KC_SLSH, KC_ASTR, KC_MINS, KC_PLUS, XXXXXXX,
-    XALLWIN, NAVFWD,  BWORD,   KC_UP,   FWORD,   KC_PGUP,                            KC_DLR,  KC_P7,   KC_P8,   KC_P9,   KC_DOT,  XXXXXXX,
-    XDESKTP, NAVBACK, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN,                            KC_PERC, KC_P4,   KC_P5,   KC_P6,   KC_EQL,  XXXXXXX,
-    RESET,   PTAB,    KC_HOME, PWIN,    KC_END,  NTAB,    _______,          _______, XXXXXXX, KC_P1,   KC_P2,   KC_P3,   KC_ENT,  XXXXXXX,
-                                   _______, _______, _______,                   _______, _______, KC_P0
-  ),
-
-  [_FUNCT] = LAYOUT(
-    KC_F12,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                              KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
-    RESET,   XALLWIN, XPRVSPC, NWIN,    XNXTSPC, XDESKTP,                            XXXXXXX, RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_K, RESET,
-    DEBUG,   XNOTIFY, PTAB,    PWIN,    NTAB,    XXXXXXX,                            XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-    KC_MUTE, KC_VOLD, KC_VOLU, KC_MRWD, KC_MFFD, KC_MPLY, _______,          _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-                                   _______, _______, _______,                   _______, _______, _______
-  )
-};
-
-void encoder_update_user(uint8_t index, bool clockwise) {
-    if (index == 0) {
-        if (clockwise) {
-            tap_code(KC_MS_WH_UP);
-        } else {
-            tap_code(KC_MS_WH_DOWN);
-        }
-    }
-}
-
@@ -1 +0,0 @@
-See my readme in [users/mattly](../../../../../users/mattly/readme.md)
@@ -1,33 +0,0 @@
-/*
-Copyright 2019 Khader Syed
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#define USE_I2C
-#define EE_HANDS
-
-#undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 12
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-
-// #undef PERMISSIVE_HOLD
-//#define TAPPING_FORCE_HOLD
-//#define RETRO_TAPPING
-#define PERMISSIVE_HOLD
@@ -1,116 +0,0 @@
-#include QMK_KEYBOARD_H
-
-extern keymap_config_t keymap_config;
-
-enum layer_names {
-    _QWERTY,
-    _LOWER,
-    _RAISE,
-    _ADJUST
-};
-
-enum custom_keycodes {
-  LOWER = SAFE_RANGE,
-  RAISE,
-};
-
-#define KC_ KC_TRNS
-
-#define KC_LOWR LOWER
-#define KC_RASE RAISE
-#define KC_RST  RESET
-#define KC_BL_S BL_STEP
-
-// left control as a left key too - makes perfect sense
-#define KC_LECL LCTL_T(KC_LEFT)
-
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  [_QWERTY] = LAYOUT_kc(
-  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
-     GESC, 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,BSPC,
-  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-     TAB , Q  , W  , E  , R  , T  ,                Y  , U  , I  , O  , P  ,BSLS,
-  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-     LCTL, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
-  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
-     LSFT, Z  , X  , C  , V  , B  ,LBRC,     RBRC, N  , M  ,COMM,DOT ,SLSH,RSFT,
-  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
-                       LGUI,LOWR,ENT ,         SPC ,RASE,RALT
-  //                  `----+----+----'        `----+----+----'
-  ),
-
-  [_LOWER] = LAYOUT_kc(
-  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
-     TILD,EXLM, AT ,HASH,DLR ,PERC,               CIRC,AMPR,ASTR,LPRN,RPRN,DEL ,
-  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-         ,    , UP ,    ,    ,    ,                   ,    ,BTN1,    ,    ,    ,
-  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-         ,LEFT,DOWN,RGHT,    ,    ,               MS_L,MS_D,MS_U,MS_R,    ,    ,
-  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,    ,
-  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
-                           ,    ,    ,             ,    ,   
-  //                  `----+----+----'        `----+----+----'
-
-),
-  [_RAISE] = LAYOUT_kc(
-  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
-     F12 , F1 , F2 , F3 , F4 , F5 ,                F6 , F7 , F8 , F9 ,F10 ,F11 ,
-  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-         ,    ,VOLU,    ,    ,LBRC,               RBRC,UNDS,PLUS,    ,    ,MUTE,
-  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-         ,MPLY,VOLD,MNXT,    ,LPRN,               RPRN,MINS,EQL ,    ,    ,    ,
-  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,    ,
-  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
-                           ,    ,    ,             ,    ,
-  //                  `----+----+----'        `----+----+----'
-  ),
-
-  [_ADJUST] = LAYOUT(
-  //,--------+--------+--------+--------+--------+--------.                          ,--------+--------+--------+--------+--------+--------.
-      _______, _______, _______, _______, _______, _______,                            _______, _______, _______, _______, _______, _______,
-  //|--------+--------+--------+--------+--------+--------|                          |--------+--------+--------+--------+--------+--------|
-      RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______,                            _______, _______, _______, _______, _______, _______,
-  //|--------+--------+--------+--------+--------+--------|                          |--------+--------+--------+--------+--------+--------|
-      RESET  , DEBUG  , RGB_HUD, RGB_SAD, RGB_VAD, _______,                            _______, _______, _______, _______, _______, _______,
-  //|--------+--------+--------+--------+--------+--------+--------.        ,--------|--------+--------+--------+--------+--------+--------|
-      BL_STEP, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______,
-  //`--------+--------+--------+----+---+--------+--------+--------/        \--------+--------+--------+---+----+--------+--------+--------'
-                                      _______, _______, _______,                  _______, _______, _______
-  //                                `--------+--------+--------'                `--------+--------+--------'
-  )
-
-};
-
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-#endif
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
@@ -1,9 +0,0 @@
-# My Iris Layout
-
-![My Iris Rev3](https://i.imgur.com/7oXacel.jpg)
-
- mouse keys enabled
- WASD as arrow keys, and same ones for media
- keys that I need, while removing keys that I don't
-
-See keymap.c for layouts
@@ -1,3 +0,0 @@
-RGBLIGHT_ENABLE = yes
-BACKLIGHT_ENABLE = yes
-MOUSEKEY_ENABLE = yes
@@ -1,39 +0,0 @@
-/*
-Copyright 2019 Kaylyn Bogle
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#include "config_common.h"
-
-#define VENDOR_ID       0xCEEB
-#define PRODUCT_ID      0x0035
-#define MANUFACTURER    kaylynb
-#define PRODUCT         MechLlama G35
-#define DESCRIPTION     35 key macropad
-
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 7
-
-#define DIODE_DIRECTION COL2ROW
-
-#define QMK_ESC_OUTPUT D6
-#define QMK_ESC_INPUT F5
-#define QMK_SPEAKER D2
-
-#define RGB_DI_PIN F7
-
-#define FORCE_NKRO
@@ -1,16 +0,0 @@
-/* Copyright 2019 Kaylyn Bogle
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "g35.h"
@@ -1,33 +0,0 @@
-/* Copyright 2019 Kaylyn Bogle
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT( \
-    K00, K01, K02, K03, K04, K05, K06, \
-    K10, K11, K12, K13, K14, K15, K16, \
-    K20, K21, K22, K23, K24, K25, K26, \
-    K30, K31, K32, K33, K34, K35, K36, \
-    K40, K41, K42, K43, K44, K45, K46  \
-) \
-{ \
-    { K00, K01, K02, K03, K04, K05, K06, }, \
-    { K10, K11, K12, K13, K14, K15, K16, }, \
-    { K20, K21, K22, K23, K24, K25, K26, }, \
-    { K30, K31, K32, K33, K34, K35, K36, }, \
-    { K40, K41, K42, K43, K44, K45, K46  } \
-}
@@ -1,14 +0,0 @@
-{
-    "keyboard_name": "G35",
-    "url": "https://github.com/kaylynb/MechLlama-G35",
-    "maintainer": "kaylynb",
-    "width": 7,
-    "height": 5.75,
-    "key_count": 35,
-    "layouts": {
-        "LAYOUT": {
-            "layout": [{"label":"F1", "x":0, "y":0.5}, {"label":"Esc", "x":1, "y":0.5}, {"label":"1", "x":2, "y":0}, {"label":"2", "x":3, "y":0.15}, {"label":"3", "x":4, "y":0}, {"label":"4", "x":5, "y":0}, {"label":"5", "x":6, "y":0}, {"label":"F2", "x":0, "y":1.5}, {"label":"Tab", "x":1, "y":1.5}, {"label":"Q", "x":2, "y":1}, {"label":"W", "x":3, "y":1.15}, {"label":"E", "x":4, "y":1}, {"label":"R", "x":5, "y":1}, {"label":"T", "x":6, "y":1}, {"label":"F3", "x":0, "y":2.5}, {"label":"Shift", "x":1, "y":2.5}, {"label":"A", "x":2, "y":2}, {"label":"S", "x":3, "y":2.15}, {"label":"D", "x":4, "y":2}, {"label":"F", "x":5, "y":2}, {"label":"G", "x":6, "y":2}, {"label":"F4", "x":0, "y":3.5}, {"label":"Ctrl", "x":1, "y":3.5}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3.15}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"F5", "x":0, "y":4.5}, {"label":"Super", "x":1, "y":4.5}, {"label":"Alt", "x":2, "y":4, "h":1.5}, {"label":"Bksp", "x":3, "y":4.25, "h":1.25}, {"label":"Enter", "x":4, "y":4, "h":1.5}, {"label":"Space", "x":5, "y":4, "h":1.75}, {"label":"Fn", "x":6, "y":4, "h":1.75}]
-        }
-    }
-}
-rt
@@ -1,72 +0,0 @@
-/* Copyright 2019 Kaylyn Bogle
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-enum layers {
-    _BASE = 0,
-    _ADJUST,
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [_BASE] = LAYOUT(
-    //┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
-        KC_F1,   KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,
-    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-        KC_F2,   KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,
-    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-        KC_F3,  KC_LSFT,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,
-    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-        KC_F4,  KC_LCTL,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,
-    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-    //
-    MO(_ADJUST),KC_LGUI, KC_LALT, KC_BSPC,  KC_ENT,  KC_SPC, KC_MINUS
-    //└────────┴────────┴────────┴────────┴────────┴────────┴────────┘
-    ),
-    [_ADJUST] = LAYOUT(
-    //┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
-       RGB_TOG,TO(_BASE),XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  RESET,
-    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-       RGB_M_K, XXXXXXX, RGB_RMOD,RGB_HUI, RGB_MOD, XXXXXXX, XXXXXXX,
-    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-       XXXXXXX, XXXXXXX, RGB_SAD, RGB_HUD, RGB_SAI, XXXXXXX, XXXXXXX,
-    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼
-       XXXXXXX, XXXXXXX, RGB_VAD, XXXXXXX, RGB_VAI, XXXXXXX, XXXXXXX,
-    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼
-    //
-       _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
-    //└────────┴────────┴────────┴────────┴────────┴────────┴────────┘
-    ),
-};
-
-#if defined(OLED_DRIVER_ENABLE)
-const char* get_layer_name(uint8_t layer) {
-    switch (layer) {
-        case _BASE:
-            return PSTR("Default");
-            break;
-        case _ADJUST:
-            return PSTR("Adjust");
-            break;
-        default:
-            return PSTR("Unknown");
-            break;
-    }
-}
-
-void oled_task_user(void) {
-    oled_write_ln_P(get_layer_name(biton32(layer_state)), false);
-}
-#endif
@@ -1,4 +0,0 @@
-![G35 Layout Image](https://i.imgur.com/fDlRAN9.png)
-# Default G35 Layout
-
-This is the default layout for the G35.
@@ -1,15 +0,0 @@
-# MechLlama G35
-
-![Photo](https://i.imgur.com/EvIA4t0.jpg)  
-
-A 35 key left-handed columnar layout macropad.
-
-Keyboard Maintainer: [Kaylyn Bogle](https://github.com/kaylynb/)  
-Hardware Supported: G35 v1 & v2  
-Hardware Availability: [KiCad and Gerbers](https://github.com/kaylynb/MechLlama-G35)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make mechllama/g35/v2:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -1,14 +0,0 @@
-MCU = atmega32u4
-F_CPU = 16000000
-ARCH = AVR8
-F_USB = $(F_CPU)
-
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-BOOTLOADER = atmel-dfu
-
-NKRO_ENABLE = yes
-OLED_DRIVER_ENABLE = yes
-RGBLIGHT_ENABLE = yes
-
-DEFAULT_FOLDER = mechllama/g35/v2
@@ -1,25 +0,0 @@
-/*
-Copyright 2019 Kaylyn Bogle
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#define DEVICE_VER      0x0001
-
-#define MATRIX_ROW_PINS { F5, F6, F4, F1, D4 }
-#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, F0, D5 }
-
-#define RGBLED_NUM 41
@@ -1,25 +0,0 @@
-/*
-Copyright 2019 Kaylyn Bogle
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#define DEVICE_VER      0x0002
-
-#define MATRIX_ROW_PINS { F5, F4, F1, F0, D4 }
-#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, F6, D5 }
-
-#define RGBLED_NUM 6
@@ -38,18 +38,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┼───┼───┤P+ │
     * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │P4 │P5 │P6 │   │
     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┼───┼───┼───┤
-     * │LSft│RAG│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RSfRCt│ ↑ │P1 │P2 │P3 │   │
-     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴──┬───┼───┼───┼───┼───┤PEn│
-     * │LCtl│LGui│LAlt│         Space          │RAlGu│FnLk │ ← │ ↓ │ → │P0 │P. │   │
-     * └────┴────┴────┴────────────────────────┴─────┴─────┴───┴───┴───┴───┴───┴───┘
+     * │LSft│RAG│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │P1 │P2 │P3 │   │
+     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬┴──┬───┼───┼───┼───┼───┤PEn│
+     * │LCtl│LGui│LAlt│         Space          │RAG│FnL│RCt│ ← │ ↓ │ → │P0 │P. │   │
+     * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┴───┴───┴───┴───┘
     */
    [L_BASE] = LAYOUT(
        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,  KC_HOME, KC_END,  KC_PGUP, KC_PGDN,
        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_P7,   KC_P8,   KC_P9,   XXXXXXX,
        FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
-        KC_LSFT, RAL_RGU, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RSF_RCT,          KC_UP,   KC_P1,   KC_P2,   KC_P3,   XXXXXXX,
-        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             RAL_RGU, XXXXXXX, FN_FNLK, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT
+        KC_LSFT, RAL_RGU, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_P1,   KC_P2,   KC_P3,   XXXXXXX,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             RAL_RGU, FN_FNLK, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT
    ),

    /* Function layer
@@ -62,9 +62,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┼───┼───┤RSt│
     * │      │M← │M↓ │M→ │MW↑│   │   │   │   │   │   │   │        │RH-│RS-│RV-│   │
     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┼───┼───┼───┤
-     * │    │   │MA0│MA2│MW←│MW→│   │   │App│Vo-│Vo+│Mut│      │PgU│RMR│RMS│RMB│   │
+     * │    │   │MA0│MA2│MW←│MW→│   │   │   │Vo-│Vo+│Mut│      │PgU│RMR│RMS│RMB│   │
     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬┴──┬───┼───┼───┼───┼───┤RMP│
-     * │    │DtPR│DtNA│          MW↓           │   │   │   │Hom│PgD│End│RM-│RM+│   │
+     * │    │DtPR│DtNA│          MW↓           │   │   │App│Hom│PgD│End│RM-│RM+│   │
     * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┴───┴───┴───┴───┘
     */
    [L_FN] = LAYOUT(
@@ -72,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, RGB_TOG, DIVIDE,  TIMES,   MINUS,
        KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD,  _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, CLEAR,            RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX,
        _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______,                   RGB_HUD, RGB_SAD, RGB_VAD, RGB_SET,
-        _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP,  KC_VOLD, KC_VOLU, KC_MUTE, _______,          KC_PGUP, RGB_M_R, RGB_M_SN,RGB_M_B, XXXXXXX,
-        _______, DST_P_R, DST_N_A,                            KC_WH_D,                            _______, XXXXXXX, _______, KC_HOME, KC_PGDN, KC_END,  RGB_RMOD,RGB_MOD, RGB_M_P
+        _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______,          KC_PGUP, RGB_M_R, RGB_M_SN,RGB_M_B, XXXXXXX,
+        _______, DST_P_R, DST_N_A,                            KC_WH_D,                            _______, _______, KC_APP,  KC_HOME, KC_PGDN, KC_END,  RGB_RMOD,RGB_MOD, RGB_M_P
    ),
 };
@@ -1,5 +1,5 @@
-QUANTUM_LIB_SRC += i2c_master.c
-SRC += leds.c \
+SRC += i2c_master.c \
+	   leds.c \
 	   matrix.c

 # MCU name
@@ -15,14 +15,40 @@
 */
 #include "268_2.h"

-void led_set_kb(uint8_t usb_led) {
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        setPinOutput(B0);
-        writePinHigh(B0);
-    } else {
-        setPinInput(B0);
-        writePinLow(B0);
-    }
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up

-    led_set_user(usb_led);
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
+
+__attribute__((weak))
+void led_set_user(uint8_t usb_led) {
+
+    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+        DDRB |= (1 << 0); PORTB |= (1 << 0);
+    }
+    else {
+        DDRB &= ~(1 << 0); PORTB &= ~(1 << 0);
+    }
 }
@@ -13,7 +13,8 @@
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#pragma once
+#ifndef N268_2_H
+#define N268_2_H

 #include "quantum.h"

@@ -26,57 +27,17 @@
 * represents the switch matrix.
 */
 #define LAYOUT( \
-    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, K015, \
-    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
-    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K214, K215, \
-    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K314, K315, \
-    K400, K401, K402,                   K406,                   K409, K410,       K412, K414, K415  \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K214, K215, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K314, K315, \
+	K400, K401, K402,                   K406,             K409, K410,       K412,       K414, K415  \
 ) { \
-    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  KC_NO, K014,  K015 }, \
-    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115 }, \
-    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, KC_NO, K214,  K215 }, \
-    { K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, K314,  K315 }, \
-    { K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, K409,  K410,  KC_NO, K412,  KC_NO, K414,  K415 }  \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015, }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115, }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, KC_NO, K214,  K215, }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, K314,  K315, }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, K409,  K410,  KC_NO, K412,  KC_NO, K414,  K415, }  \
 }

-#define LAYOUT_split_bs( \
-    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
-    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
-    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K214, K215, \
-    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K314, K315, \
-    K400, K401, K402,                   K406,                   K409, K410,       K412, K414, K415  \
-) { \
-    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
-    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115 }, \
-    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, KC_NO, K214,  K215 }, \
-    { K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, K314,  K315 }, \
-    { K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, K409,  K410,  KC_NO, K412,  KC_NO, K414,  K415 }  \
-}
-
-#define LAYOUT_7u_space( \
-    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, K015, \
-    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
-    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K214, K215, \
-    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K314, K315, \
-    K400, K401, K402,                   K406,                         K410,       K412, K414, K415  \
-) { \
-    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  KC_NO, K014,  K015 }, \
-    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115 }, \
-    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, KC_NO, K214,  K215 }, \
-    { K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, K314,  K315 }, \
-    { K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  KC_NO, K412,  KC_NO, K414,  K415 }  \
-}
-
-#define LAYOUT_7u_space_split_bs( \
-    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
-    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
-    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K214, K215, \
-    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K314, K315, \
-    K400, K401, K402,                   K406,                         K410,       K412, K414, K415  \
-) { \
-    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
-    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115 }, \
-    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, KC_NO, K214,  K215 }, \
-    { K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, K314,  K315 }, \
-    { K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  KC_NO, K412,  KC_NO, K414,  K415 }  \
-}
+#endif
@@ -41,6 +41,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
+/* key matrix pins */
 #define MATRIX_ROW_PINS { F7, F6, F5, F0, B5 }
 #define MATRIX_COL_PINS { C6, B6, C7, F4, E6, D0, D7, D1, D2, B4, D6, D4, D5, F1, D3, B1 }
 #define UNUSED_PINS
@@ -48,42 +49,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW

-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
+/* number of backlight levels */
 #define BACKLIGHT_PIN B7
-//define BACKLIGHT_BREATHING
+#ifdef BACKLIGHT_PIN
 #define BACKLIGHT_LEVELS 3
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-//   #define RGBLED_NUM 16
-//   #define RGBLIGHT_HUE_STEP 8
-//   #define RGBLIGHT_SAT_STEP 8
-//   #define RGBLIGHT_VAL_STEP 8
-//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-//   #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-//   #define RGBLIGHT_EFFECT_BREATHING
-//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-//   #define RGBLIGHT_EFFECT_SNAKE
-//   #define RGBLIGHT_EFFECT_KNIGHT
-//   #define RGBLIGHT_EFFECT_CHRISTMAS
-//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-//   #define RGBLIGHT_EFFECT_RGB_TEST
-//   #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-//   /*==== use exp() and sin() ====*/
-//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
-// #endif
+#endif

 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
@@ -136,10 +106,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

-/* key combination for magic key command */
-/* defined by default; to change, uncomment and set to the combination you want */
-// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -149,8 +115,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP           H
-//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
 //#define MAGIC_KEY_DEBUG          D
 //#define MAGIC_KEY_DEBUG_MATRIX   X
 //#define MAGIC_KEY_DEBUG_KBD      K
@@ -158,8 +124,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MAGIC_KEY_VERSION        V
 //#define MAGIC_KEY_STATUS         S
 //#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
 //#define MAGIC_KEY_LAYER0         0
-//#define MAGIC_KEY_LAYER0_ALT     GRAVE
 //#define MAGIC_KEY_LAYER1         1
 //#define MAGIC_KEY_LAYER2         2
 //#define MAGIC_KEY_LAYER3         3
@@ -169,11 +136,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MAGIC_KEY_LAYER7         7
 //#define MAGIC_KEY_LAYER8         8
 //#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     B
-//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
 //#define MAGIC_KEY_LOCK           CAPS
 //#define MAGIC_KEY_EEPROM         E
-//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
 //#define MAGIC_KEY_NKRO           N
 //#define MAGIC_KEY_SLEEP_LED      Z

@@ -5,289 +5,8 @@
  "width": 16,
  "height": 5,
  "layouts": {
-    "LAYOUT": {
-      "layout": [
-        {"x":0, "y":0},
-        {"x":1, "y":0},
-        {"x":2, "y":0},
-        {"x":3, "y":0},
-        {"x":4, "y":0},
-        {"x":5, "y":0},
-        {"x":6, "y":0},
-        {"x":7, "y":0},
-        {"x":8, "y":0},
-        {"x":9, "y":0},
-        {"x":10, "y":0},
-        {"x":11, "y":0},
-        {"x":12, "y":0},
-        {"x":13, "y":0, "w":2},
-        {"x":15, "y":0},
-        {"x":0, "y":1, "w":1.5},
-        {"x":1.5, "y":1},
-        {"x":2.5, "y":1},
-        {"x":3.5, "y":1},
-        {"x":4.5, "y":1},
-        {"x":5.5, "y":1},
-        {"x":6.5, "y":1},
-        {"x":7.5, "y":1},
-        {"x":8.5, "y":1},
-        {"x":9.5, "y":1},
-        {"x":10.5, "y":1},
-        {"x":11.5, "y":1},
-        {"x":12.5, "y":1},
-        {"x":13.5, "y":1, "w":1.5},
-        {"x":15, "y":1},
-        {"x":0, "y":2, "w":1.75},
-        {"x":1.75, "y":2},
-        {"x":2.75, "y":2},
-        {"x":3.75, "y":2},
-        {"x":4.75, "y":2},
-        {"x":5.75, "y":2},
-        {"x":6.75, "y":2},
-        {"x":7.75, "y":2},
-        {"x":8.75, "y":2},
-        {"x":9.75, "y":2},
-        {"x":10.75, "y":2},
-        {"x":11.75, "y":2},
-        {"x":12.75, "y":2, "w":2.25},
-        {"x":15, "y":2},
-        {"x":0, "y":3, "w":2.25},
-        {"x":2.25, "y":3},
-        {"x":3.25, "y":3},
-        {"x":4.25, "y":3},
-        {"x":5.25, "y":3},
-        {"x":6.25, "y":3},
-        {"x":7.25, "y":3},
-        {"x":8.25, "y":3},
-        {"x":9.25, "y":3},
-        {"x":10.25, "y":3},
-        {"x":11.25, "y":3},
-        {"x":12.25, "y":3, "w":1.75},
-        {"x":14, "y":3},
-        {"x":15, "y":3},
-        {"x":0, "y":4, "w":1.25},
-        {"x":1.25, "y":4, "w":1.25},
-        {"x":2.5, "y":4, "w":1.25},
-        {"x":3.75, "y":4, "w":6.25},
-        {"x":10, "y":4, "w":1.25},
-        {"x":11.25, "y":4, "w":1.25},
-        {"x":13, "y":4},
-        {"x":14, "y":4},
-        {"x":15, "y":4}
-      ]
-    },
-    "LAYOUT_split_bs": {
-      "layout": [
-        {"x":0, "y":0},
-        {"x":1, "y":0},
-        {"x":2, "y":0},
-        {"x":3, "y":0},
-        {"x":4, "y":0},
-        {"x":5, "y":0},
-        {"x":6, "y":0},
-        {"x":7, "y":0},
-        {"x":8, "y":0},
-        {"x":9, "y":0},
-        {"x":10, "y":0},
-        {"x":11, "y":0},
-        {"x":12, "y":0},
-        {"x":13, "y":0},
-        {"x":14, "y":0},
-        {"x":15, "y":0},
-        {"x":0, "y":1, "w":1.5},
-        {"x":1.5, "y":1},
-        {"x":2.5, "y":1},
-        {"x":3.5, "y":1},
-        {"x":4.5, "y":1},
-        {"x":5.5, "y":1},
-        {"x":6.5, "y":1},
-        {"x":7.5, "y":1},
-        {"x":8.5, "y":1},
-        {"x":9.5, "y":1},
-        {"x":10.5, "y":1},
-        {"x":11.5, "y":1},
-        {"x":12.5, "y":1},
-        {"x":13.5, "y":1, "w":1.5},
-        {"x":15, "y":1},
-        {"x":0, "y":2, "w":1.75},
-        {"x":1.75, "y":2},
-        {"x":2.75, "y":2},
-        {"x":3.75, "y":2},
-        {"x":4.75, "y":2},
-        {"x":5.75, "y":2},
-        {"x":6.75, "y":2},
-        {"x":7.75, "y":2},
-        {"x":8.75, "y":2},
-        {"x":9.75, "y":2},
-        {"x":10.75, "y":2},
-        {"x":11.75, "y":2},
-        {"x":12.75, "y":2, "w":2.25},
-        {"x":15, "y":2},
-        {"x":0, "y":3, "w":2.25},
-        {"x":2.25, "y":3},
-        {"x":3.25, "y":3},
-        {"x":4.25, "y":3},
-        {"x":5.25, "y":3},
-        {"x":6.25, "y":3},
-        {"x":7.25, "y":3},
-        {"x":8.25, "y":3},
-        {"x":9.25, "y":3},
-        {"x":10.25, "y":3},
-        {"x":11.25, "y":3},
-        {"x":12.25, "y":3, "w":1.75},
-        {"x":14, "y":3},
-        {"x":15, "y":3},
-        {"x":0, "y":4, "w":1.25},
-        {"x":1.25, "y":4, "w":1.25},
-        {"x":2.5, "y":4, "w":1.25},
-        {"x":3.75, "y":4, "w":6.25},
-        {"x":10, "y":4, "w":1.25},
-        {"x":11.25, "y":4, "w":1.25},
-        {"x":13, "y":4},
-        {"x":14, "y":4},
-        {"x":15, "y":4}
-      ]
-    },
-    "LAYOUT_7u_space": {
-      "layout": [
-        {"x":0, "y":0},
-        {"x":1, "y":0},
-        {"x":2, "y":0},
-        {"x":3, "y":0},
-        {"x":4, "y":0},
-        {"x":5, "y":0},
-        {"x":6, "y":0},
-        {"x":7, "y":0},
-        {"x":8, "y":0},
-        {"x":9, "y":0},
-        {"x":10, "y":0},
-        {"x":11, "y":0},
-        {"x":12, "y":0},
-        {"x":13, "y":0, "w":2},
-        {"x":15, "y":0},
-        {"x":0, "y":1, "w":1.5},
-        {"x":1.5, "y":1},
-        {"x":2.5, "y":1},
-        {"x":3.5, "y":1},
-        {"x":4.5, "y":1},
-        {"x":5.5, "y":1},
-        {"x":6.5, "y":1},
-        {"x":7.5, "y":1},
-        {"x":8.5, "y":1},
-        {"x":9.5, "y":1},
-        {"x":10.5, "y":1},
-        {"x":11.5, "y":1},
-        {"x":12.5, "y":1},
-        {"x":13.5, "y":1, "w":1.5},
-        {"x":15, "y":1},
-        {"x":0, "y":2, "w":1.75},
-        {"x":1.75, "y":2},
-        {"x":2.75, "y":2},
-        {"x":3.75, "y":2},
-        {"x":4.75, "y":2},
-        {"x":5.75, "y":2},
-        {"x":6.75, "y":2},
-        {"x":7.75, "y":2},
-        {"x":8.75, "y":2},
-        {"x":9.75, "y":2},
-        {"x":10.75, "y":2},
-        {"x":11.75, "y":2},
-        {"x":12.75, "y":2, "w":2.25},
-        {"x":15, "y":2},
-        {"x":0, "y":3, "w":2.25},
-        {"x":2.25, "y":3},
-        {"x":3.25, "y":3},
-        {"x":4.25, "y":3},
-        {"x":5.25, "y":3},
-        {"x":6.25, "y":3},
-        {"x":7.25, "y":3},
-        {"x":8.25, "y":3},
-        {"x":9.25, "y":3},
-        {"x":10.25, "y":3},
-        {"x":11.25, "y":3},
-        {"x":12.25, "y":3, "w":1.75},
-        {"x":14, "y":3},
-        {"x":15, "y":3},
-        {"x":0, "y":4, "w":1.5},
-        {"x":1.5, "y":4},
-        {"x":2.5, "y":4, "w":1.5},
-        {"x":4, "y":4, "w":7},
-        {"x":11, "y":4, "w":1.5},
-        {"x":13, "y":4},
-        {"x":14, "y":4},
-        {"x":15, "y":4}
-      ]
-    },
-    "LAYOUT_7u_space_split_bs": {
-      "layout": [
-        {"x":0, "y":0},
-        {"x":1, "y":0},
-        {"x":2, "y":0},
-        {"x":3, "y":0},
-        {"x":4, "y":0},
-        {"x":5, "y":0},
-        {"x":6, "y":0},
-        {"x":7, "y":0},
-        {"x":8, "y":0},
-        {"x":9, "y":0},
-        {"x":10, "y":0},
-        {"x":11, "y":0},
-        {"x":12, "y":0},
-        {"x":13, "y":0},
-        {"x":14, "y":0},
-        {"x":15, "y":0},
-        {"x":0, "y":1, "w":1.5},
-        {"x":1.5, "y":1},
-        {"x":2.5, "y":1},
-        {"x":3.5, "y":1},
-        {"x":4.5, "y":1},
-        {"x":5.5, "y":1},
-        {"x":6.5, "y":1},
-        {"x":7.5, "y":1},
-        {"x":8.5, "y":1},
-        {"x":9.5, "y":1},
-        {"x":10.5, "y":1},
-        {"x":11.5, "y":1},
-        {"x":12.5, "y":1},
-        {"x":13.5, "y":1, "w":1.5},
-        {"x":15, "y":1},
-        {"x":0, "y":2, "w":1.75},
-        {"x":1.75, "y":2},
-        {"x":2.75, "y":2},
-        {"x":3.75, "y":2},
-        {"x":4.75, "y":2},
-        {"x":5.75, "y":2},
-        {"x":6.75, "y":2},
-        {"x":7.75, "y":2},
-        {"x":8.75, "y":2},
-        {"x":9.75, "y":2},
-        {"x":10.75, "y":2},
-        {"x":11.75, "y":2},
-        {"x":12.75, "y":2, "w":2.25},
-        {"x":15, "y":2},
-        {"x":0, "y":3, "w":2.25},
-        {"x":2.25, "y":3},
-        {"x":3.25, "y":3},
-        {"x":4.25, "y":3},
-        {"x":5.25, "y":3},
-        {"x":6.25, "y":3},
-        {"x":7.25, "y":3},
-        {"x":8.25, "y":3},
-        {"x":9.25, "y":3},
-        {"x":10.25, "y":3},
-        {"x":11.25, "y":3},
-        {"x":12.25, "y":3, "w":1.75},
-        {"x":14, "y":3},
-        {"x":15, "y":3},
-        {"x":0, "y":4, "w":1.5},
-        {"x":1.5, "y":4},
-        {"x":2.5, "y":4, "w":1.5},
-        {"x":4, "y":4, "w":7},
-        {"x":11, "y":4, "w":1.5},
-        {"x":13, "y":4},
-        {"x":14, "y":4},
-        {"x":15, "y":4}
-      ]
-    }
+      "LAYOUT": {
+          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+      }
  }
 }
@@ -4,51 +4,80 @@
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
 // entirely and just use numbers.
-enum layer_names {
-    _BL,
-    _FL
-};
+#define _BL 0
+#define _FL1 1
+#define _FL2 2

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Base Layer
-    * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
-    * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │  Bspc │ ` │
-    * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
-    * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │Del│
-    * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
-    * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │  Enter │PgU│
-    * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-    * │ Shift  │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │Shift │ ↑ │PgD│
-    * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
-    * │Ctrl│Win │Alt │        Space           │Alt │ Fn │ │ ← │ ↓ │ → │
-    * └────┴────┴────┴────────────────────────┴────┴────┴─┴───┴───┴───┘
+    /* _BL: Base Layer(Default) - For ISO enter use ANSI enter
+    * ,----------------------------------------------------------------.
+    * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| \|BSpc| Grv|
+    * |----------------------------------------------------------------|
+    * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | Del|
+    * |----------------------------------------------------------------|
+    * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| #| Ent|PgUp|
+    * |----------------------------------------------------------------|
+    * |Shift| \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|PgDn|
+    * |----------------------------------------------------------------|
+    * |Ctrl|Win |Alt |        Space        |Alt|Mo(1)|Ctrl|Lef|Dow|Rght|
+    * `----------------------------------------------------------------'
    */
    [_BL] = LAYOUT(
-        KC_ESC,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,            KC_BSPC, KC_GRV,
+        KC_ESC,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSLS, KC_BSPC, KC_GRV,
        KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,  KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,           KC_BSLS, KC_DEL,
        KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,    KC_G,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                    KC_ENT,  KC_PGUP,
        KC_LSFT,          KC_Z,    KC_X,   KC_C,    KC_V,  KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,           KC_UP,   KC_PGDN,
-        KC_LCTL, KC_LGUI, KC_LALT,                         KC_SPC,                             KC_RALT, MO(_FL),           KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-
-    /* Function Layer
-    * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
-    * │ ` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│  PScr │   │
-    * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
-    * │     │   │   │   │RST│   │   │   │   │   │   │   │   │     │Ins│
-    * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
-    * │      │   │   │   │   │   │   │   │   │   │   │   │        │Hom│
-    * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-    * │        │   │   │   │   │   │   │   │   │Bl-│Bl+│ Mute │Vl+│End│
-    * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
-    * │    │    │    │      BL Toggle         │    │    │ │   │Vl-│   │
-    * └────┴────┴────┴────────────────────────┴────┴────┴─┴───┴───┴───┘
+        KC_LCTL, KC_LGUI, KC_LALT,                         KC_SPC,                    KC_RALT, MO(_FL1),         KC_LEFT,           KC_DOWN, KC_RGHT),
+    /* _FL1: Function Layer 1 - For ISO enter use ANSI enter
+    * ,----------------------------------------------------------------.
+    * |  `|F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   |PScr|    |
+    * |----------------------------------------------------------------|
+    * |     |   |   |   |RST|   |   |   |   |   |   |   |   |     | Ins|
+    * |----------------------------------------------------------------|
+    * |       |   |   |   |   |   |   |   |   |   |   |   |  |    |Home|
+    * |----------------------------------------------------------------|
+    * |     |   |   |   |   |   |   |   |   |Bl-|Bl+|   |Mute|Vol+| End|
+    * |----------------------------------------------------------------|
+    * |    |    |    |      BL_Toggle       |   |   |   |    |Vol-|    |
+    * `----------------------------------------------------------------'
    */
-    [_FL] = LAYOUT(
-        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_PSCR, _______,
+    [_FL1] = LAYOUT(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, KC_PSCR, _______,
        _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_INS,
        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, KC_HOME,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, BL_DEC,  BL_INC,  KC_MUTE,          KC_VOLU, KC_END,
-        _______, _______, _______,                            BL_TOGG,                            _______, _______,          _______, KC_VOLD, _______
-    )
+        _______,          _______, _______, _______, _______, _______, _______, _______, BL_DEC,  BL_INC,  _______, KC_MUTE,          KC_VOLU, KC_END,
+        _______, _______, _______,                            BL_TOGG,                   _______, _______,          _______,          KC_VOLD, _______),
+    /* _FL2: Function Layer 2 - For ISO enter use ANSI enter
+    * ,----------------------------------------------------------------.
+    * |   |  |   |   |   |   |   |   |   |   |   |   |   |    |   |    |
+    * |----------------------------------------------------------------|
+    * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |    |
+    * |----------------------------------------------------------------|
+    * |       |   |   |   |   |   |   |   |   |   |   |   |  |    |    |
+    * |----------------------------------------------------------------|
+    * |     |   |   |   |   |   |   |   |   |   |   |   |    |    |    |
+    * |----------------------------------------------------------------|
+    * |    |    |    |                      |   |   |   |    |    |    |
+    * `----------------------------------------------------------------'
+    */
+    [_FL2] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______,          _______, _______),
+
 };
+
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    return true;
+}
+
+
@@ -4,9 +4,10 @@

 A fully customizable 65% keyboard.

-Keyboard Maintainer: [Rozakiin](https://github.com/rozakiin)  
-Hardware Supported: 268.2 PCB  
-Hardware Availability: [Noxary](https://shop.noxary.co/collections/268-2/products/noxary-268-2-polycarbonate)
+* Keyboard Maintainer: [Rozakiin](https://github.com/rozakiin)
+* Hardware Supported: 268.2 PCB
+  * rev1 
+* Hardware Availability: [Noxary](https://shop.noxary.co/collections/268-2/products/noxary-268-2-polycarbonate)

 Make example for this keyboard (after setting up your build environment):

@@ -48,6 +48,16 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 BOOTLOADER = atmel-dfu


+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
 # Build Options
 #   change yes to no to disable
 #
@@ -1,14 +0,0 @@
-#include QMK_KEYBOARD_H
-
-#define M_PROG DYN_MACRO_PROG
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    LAYOUT_101(
-        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,      KC_PSCR, KC_SLCK, KC_PAUS,
-        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,     KC_INS,  KC_HOME, KC_PGUP,     M_PROG,  KC_PSLS, KC_PAST, KC_PMNS,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,     KC_DEL,  KC_END,  KC_PGDN,     KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
-        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,                                     KC_P4,   KC_P5,   KC_P6,
-        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,              KC_UP,                KC_P1,   KC_P2,   KC_P3,   KC_PENT,
-        KC_LCTL,          KC_LALT,                            KC_SPC,                                      KC_RALT,          KC_RCTL,     KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,            KC_PDOT
-    )
-};
@@ -29,15 +29,15 @@ enum keycodes {
 }

 /* Northgate Factory Plates. Most are based on internet research, user beware. */ 
-#define LAYOUT_101( \
+#define LAYOUT_101 ( \
 					K103,       K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116,   K117, K118, K119, \
 					K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216,   K217, K218, K219,   K220, K221, K222, K223, \
-					K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316,   K317, K318, K319,   K320, K321, K322, K323, \
+					K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316    K317, K318, K319,   K320, K321, K322, K323, \
 					K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414,    K416,                          K420, K421, K422,       \
 					K503,       K505, K506, K507, K508, K509, K510, K511, K512, K513, K514,    K515,            K518,         K520, K521, K522, K523, \
 					K603,       K605,                               K610,       K613,             K616,   K617, K618, K619,   K620,       K622  \
 ) { \
-	{ ____, ____,   K103, ____, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116,   K117, K118, K119,   ____, ____, ____, ____ }, \
+ 	{ ____, ____,   K103, ____  K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116,   K117, K118, K119,   ____, ____, ____, ____ }, \
 	{ ____, ____,   K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216,   K217, K218, K219,   K220, K221, K222, K223 }, \
 	{ ____, ____,   K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316,   K317, K318, K319,   K320, K321, K322, K323 }, \
 	{ ____, ____,   K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, ____, K416,   ____, ____, ____,   K420, K421, K422, ____ }, \
@@ -1,34 +1,166 @@
+/* Copyright 2015-2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
 #include QMK_KEYBOARD_H
-#include "mattly.h"
+#include "muse.h"
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _NUMBER,
+  _SYMBOL,
+  _FUNC,
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE
+};
+
+#define SPC_SHF MT(MOD_LSFT, KC_SPC)
+
+#define ESC_HYP MT(MOD_HYPR, KC_ESC)
+#define TAB_NUM LT(_NUMBER, KC_TAB)
+#define BSP_SYM LT(_SYMBOL, KC_BSPC)
+#define DEL_WRP MT(MOD_LCTL | MOD_LALT | MOD_LGUI, KC_DEL)
+
+#define SYMLOCK TG(_SYMBOL)
+#define NUMLOCK TG(_NUMBER)
+
+#define ONE_CTL OSM(MOD_LCTL)
+#define ONE_ALT OSM(MOD_LALT)
+#define ONE_GUI OSM(MOD_LGUI)
+#define ONE_HYP OSM(MOD_HYPR)
+#define ONE_MEH OSM(MOD_MEH)
+#define ONE_WRP OSM(MOD_LCTL | MOD_LALT | MOD_LGUI)
+#define ONE_WOA OSM(MOD_LCTL | MOD_LGUI | MOD_LSFT)
+#define ONE_DER OSM(MOD_LALT | MOD_LGUI | MOD_LSFT)
+
+#define A_CTRL  MT(MOD_LCTL, KC_A)
+#define S_ALT   MT(MOD_LALT, KC_S)
+#define D_GUI   MT(MOD_LGUI, KC_D)
+#define F_SHFT  MT(MOD_LSFT, KC_F)
+#define J_SHFT  MT(MOD_RSFT, KC_J)
+#define K_GUI   MT(MOD_RGUI, KC_K)
+#define L_ALT   MT(MOD_RALT, KC_L)
+#define MINSCTL MT(MOD_RCTL, KC_MINS)
+
+#define ENT_CTL MT(MOD_LCTL, KC_ENT)
+#define LT_ALT  MT(MOD_LALT, KC_LEFT)
+#define DN_GUI  MT(MOD_LGUI, KC_DOWN)
+#define RT_SHFT MT(MOD_LSFT, KC_RGHT)
+#define N4_SHFT MT(MOD_RSFT, KC_4)
+#define N5_GUI  MT(MOD_RGUI, KC_5)
+#define N6_ALT  MT(MOD_RALT, KC_6)
+
+#define BWORD LALT(KC_LEFT)
+#define FWORD LALT(KC_RIGHT)
+
+#define NWIN LGUI(KC_GRV)
+#define PWIN LGUI(LSFT(KC_GRV))
+#define NTAB LGUI(LSFT(KC_RBRC))
+#define PTAB LGUI(LSFT(KC_LBRC))
+#define NAVBACK LGUI(KC_LBRC)
+#define NAVFWD  LGUI(KC_RBRC)
+
+#define XMSNCTL HYPR(KC_F14)
+#define XDSKTOP HYPR(KC_F15)
+#define XNXTSPC HYPR(KC_F16)
+#define XPRVSPC HYPR(KC_F17)
+#define XNOTIFY HYPR(KC_F18)

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Querty
+  |   #  |   q  |   w  |   e  |   r  |   t  |   y  |   u  |   i  |   o  |   p  |   -  |
+  |      |      |      |      |      |      |      |      |      |      |      |      |
+  |------|------|------|------|------|------|------|------|------|------|------|------|
+  |   (  |   a  |   s  |   d  |   f  |   g  |   h  |   j  |   k  |   l  |   ;  |   '  |
+  |      | CTRL | ALT  |  GUI | SHIFT|      |      | SHIFT| GUI  | ALT  | CTRL |      |
+  |------|------|------|------|------|------|------|------|------|------|------|------|
+  |   [  |   z  |   x  |   c  |   v  |   b  |   n  |   m  |   ,  |   .  |   /  |   >  |
+  |      |      |      |      |      |      |      |      |      |      |      |      |
+  |------|------|------|------|------|------|------|------|------|------|------|------|
+  | ctrl | alt  |  gui | Esc  | Tab  |   space     | Bksp |  Del | hyper| meh  | warp |
+  |      |      |      | FUNC |NUMBER|   SHIFT     |SYMBOL|      |      |      |      |
+ */
 [_QWERTY] = LAYOUT_planck_grid(
-    XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_SCLN,
-    KC_CAPS, A_CTRL,  S_ALT,   D_GUI,   F_SHFT,  KC_G,    KC_H,    J_SHFT,  K_GUI,   L_ALT,   MINSCTL, KC_QUOT,
-    XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
-    XXXXXXX, NAVLOCK, XXXXXXX, ESC_HYP, BSP_NUM, ENT_SFT, SPC_SFT, TAB_SYM, DEL_WRP, XXXXXXX, SYMLOCK, XXXXXXX
+    KC_HASH, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_SCLN,
+    KC_LPRN, A_CTRL,  S_ALT,   D_GUI,   F_SHFT,  KC_G,    KC_H,    J_SHFT,  K_GUI,   L_ALT,   MINSCTL, KC_QUOT,
+    KC_LBRC, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RABK,
+    NUMLOCK, MO(_FUNC), ONE_MEH, ESC_HYP, TAB_NUM, SPC_SHF, SPC_SHF, BSP_SYM, DEL_WRP, ONE_WRP, ONE_DER, SYMLOCK
 ),

+/* Symbol
+  |      |   &  |   `  |   ~  |   [  |   ]  |   <  |   >  |   +  |   |  |      |      |
+  |      |   $  |   %  |   =  |   (  |   )  |   ;  |   :  |   !  |   @  |   _  |      |
+  |      |      |   ^  |   #  |   {  |   }  |   '  |   "  |   |  |   \  |   ?  |      |
+  |      |      |      |      |      |             | .... |      |      |      |      |
+ */
 [_SYMBOL] = LAYOUT_planck_grid(
-     _______, KC_AMPR, KC_GRV,  KC_TILD, KC_LBRC, KC_RBRC, KC_LABK, KC_RABK, KC_PLUS, KC_ASTR, XXXXXXX, _______,
-     _______, KC_DLR,  KC_PERC, KC_EQL,  KC_LPRN, KC_RPRN, KC_SCLN, KC_COLN, KC_EXLM, KC_AT,   KC_UNDS, _______,
+     KC_ESC,  KC_AMPR, KC_GRV,  KC_TILD, KC_LBRC, KC_RBRC, KC_LABK, KC_RABK, KC_PLUS, KC_ASTR, XXXXXXX, KC_DEL,
+     KC_ENT,  KC_DLR,  KC_PERC, KC_EQL,  KC_LPRN, KC_RPRN, KC_SCLN, KC_COLN, KC_EXLM, KC_AT,   KC_UNDS, KC_BSPC,
     _______, XXXXXXX, KC_CIRC, KC_HASH, KC_LCBR, KC_RCBR, KC_QUOT, KC_DQUO, KC_PIPE, KC_BSLS, KC_QUES, _______,
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
 ),
-
-[_NAVNUM] = LAYOUT_planck_grid(
-    _______, XXXXXXX, BWORD,   KC_UP,   FWORD,   KC_PGUP, KC_DOT,  KC_7,    KC_8,    KC_9,    KC_PLUS, KC_ASTR,
-    _______, KC_ENT,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_0,    KC_4,    KC_5,    KC_6,    KC_MINS, KC_SLSH,
-    _______, KC_BSPC, KC_HOME, KC_TAB,  KC_END,  KC_DEL,  KC_COMM, KC_1,    KC_2,    KC_3,    KC_EQL,  KC_PERC,
-    _______, _______, _______, _______, _______, _______, _______, _______, KC_0,    KC_COLN, KC_DLR,  _______
+/* Number
+  |      |      |<-word|  up  |word->| PgUp |   .  |   7  |   8  |   9  |   +  |   *  |
+  |      | Enter| left | down | right| PgDn |   0  |   4  |   5  |   6  |   -  |   /  |
+  |      | Bksp | Home |  tab | End  | Del  |   ,  |   1  |   2  |   3  |   =  |   %  |
+  |      |      |      |      | .... |             |      |      |   :  |   $  |      |
+ */
+[_NUMBER] = LAYOUT_planck_grid(
+    XXXXXXX, XXXXXXX, BWORD,   KC_UP,   FWORD,   KC_PGUP, KC_DOT,  KC_7,    KC_8,    KC_9,    KC_PLUS, KC_ASTR,
+    KC_CAPS, ENT_CTL, LT_ALT,  DN_GUI,  RT_SHFT, KC_PGDN, KC_0,    N4_SHFT, N5_GUI,  N6_ALT,  MINSCTL, KC_SLSH,
+    XXXXXXX, KC_BSPC, KC_HOME, KC_TAB,  KC_END,  KC_DEL,  KC_COMM, KC_1,    KC_2,    KC_3,    KC_EQL,  KC_PERC,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_COLN, KC_DLR,  _______
 ),
-
-[_FUNCT] = LAYOUT_planck_grid(
-    RESET,   XALLWIN, XPRVSPC, NWIN,    XNXTSPC, XDESKTP, XXXXXXX, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F13,
+/* Function
+ * | Reset| Mctl | Pspc | Nwin | Nspc | Desk |      |  F7  |  F8  |  F9  | F10  | F13  |
+ * | Debug| Nctr | Ptab | Pwin | Ntab | Back | Fwd  |  F4  |  F5  |  F6  | F11  | F14  |
+ * | Mute | Vol- | Vol+ | Trk- | Trk+ | Play |      |  F1  |  F2  |  F3  | F12  | F15  |
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ */
+[_FUNC] = LAYOUT_planck_grid(
+    RESET,   XMSNCTL, XPRVSPC, NWIN,    XNXTSPC, XDSKTOP, XXXXXXX, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F13,
    DEBUG,   XNOTIFY, PTAB,    PWIN,    NTAB,    NAVBACK, NAVFWD,  KC_F4,   KC_F5,   KC_F6,   KC_F11,  KC_F14,
    KC_MUTE, KC_VOLD, KC_VOLU, KC_MRWD, KC_MFFD, KC_MPLY, XXXXXXX, KC_F1,   KC_F2,   KC_F3,   KC_F12,  KC_F15,
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
 )
 };

+#ifdef AUDIO_ENABLE
+#endif
+
+uint32_t layer_state_set_user(uint32_t state) {
+  state = update_tri_layer_state(state, _SYMBOL, _NUMBER, _FUNC);
+  return state;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+

@@ -1 +1,28 @@
-See my readme in [users/mattly](../../../../../users/mattly/readme.md)
+# Mattly's Planck layout
+
+This planck layout is optimized for, in order:
+
+- moving work from my pinkies to my thumbs
+- writing lisp/clojure code in my evil-mode based emacs setup
+- tapping out messages in chat applications such as slack
+- writing english in markdown files in said emacs
+- navigating mac applications
+- writing english in a web browser on a macintosh
+- writing other programming languages' code in said emacs
+- writing english in other contexts
+- literally anything else
+
+## oddities:
+
+You may notice that `enter` is on a layer. This is an experiment and I kind of
+like it so far, since many programs interpret that keystroke as a "commit"
+of some kind.
+
+## works in progress
+
+I'm trying to figure out how to make some things easier to do with the mouse or
+one-handed. Right now the combo of entering numbers and using a mouse with my
+right hand is kind of annoying. I want to be able to toggle layers on, but only
+from within that layer.
+
+![mattly's keymap](https://lyonheart.us/etc/mattly-keymap.png)
@@ -1,4 +0,0 @@
-#pragma once
-
-#define LAYER_FN
-#define LAYER_NUMPAD
@@ -1,79 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "konstantin.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Base layer
-     * ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐
-     * │Esc│   │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12││PSc│SLk│Pau│
-     * └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘
-     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐
-     * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace ││Ins│Hom│PgU│
-     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤
-     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │     ││Del│End│PgD│
-     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐Ent │└───┴───┴───┘
-     * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ \ │    │
-     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤    ┌───┐
-     * │LSft│RAG│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │  RShift  │    │ ↑ │
-     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐
-     * │LCtl│LGui│LAlt│         Space          │RAlt│RGui│FnLk│RCtl││ ← │ ↓ │ → │
-     * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
-     */
-    [L_BASE] = LAYOUT_tkl_iso(
-        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_SLCK, KC_PAUS,
-        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_DEL,  KC_END,  KC_PGDN,
-        FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
-        KC_LSFT, RAL_RGU, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,          KC_UP,
-        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, FN_FNLK, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-
-    /* Function layer
-     * ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐
-     * │   │   │   │   │   │   │ │   │   │   │   │ │   │   │   │   ││   │Num│   │
-     * └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘
-     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐
-     * │   │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ Clear ││   │   │   │
-     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤
-     * │ M4  │M2 │M↑ │M1 │M3 │M5 │   │UCM│   │Stp│Ply│Prv│Nxt│     ││   │   │   │
-     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │└───┴───┴───┘
-     * │      │M← │M↓ │M→ │MW↑│   │   │   │   │   │   │   │   │    │
-     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤    ┌───┐
-     * │    │   │MA0│MA2│MW←│MW→│   │   │App│Vo-│Vo+│Mut│          │    │PgU│
-     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐
-     * │    │DtPR│DtNA│          MW↓           │    │    │    │    ││Hom│PgD│End│
-     * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
-     */
-    [L_FN] = LAYOUT_tkl_iso(
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD,  _______,
-        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  CLEAR,   _______, _______, _______,
-        KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD,  _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT,          _______, _______, _______,
-        _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP,  KC_VOLD, KC_VOLU, KC_MUTE,          _______,          KC_PGUP,
-        _______, DST_P_R, DST_N_A,                            KC_WH_D,                            _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END
-    ),
-
-    /* Numpad layer
-     * ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐
-     * │   │   │   │   │   │   │ │   │   │   │   │ │   │   │   │   ││   │Num│   │
-     * └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘
-     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐
-     * │   │   │   │   │   │   │   │P7 │P8 │P9 │P- │ − │ = │       ││   │   │   │
-     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤
-     * │     │   │   │   │   │   │   │P4 │P5 │P6 │P+ │ ( │ ) │     ││   │   │   │
-     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐PEnt│└───┴───┴───┘
-     * │      │   │   │   │   │   │   │P1 │P2 │P3 │P* │ × │   │    │
-     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤    ┌───┐
-     * │    │   │   │   │   │   │   │P0 │P0 │ , │P. │P/ │    ÷     │    │   │
-     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐
-     * │    │    │    │                        │    │    │    │    ││   │   │   │
-     * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
-     */
-    [L_NUMPAD] = LAYOUT_tkl_iso(
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD,  _______,
-        _______, _______, _______, _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   KC_PMNS, MINUS,   EQUALS,  _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, KC_P4,   KC_P5,   KC_P6,   KC_PPLS, L_PAREN, R_PAREN,          _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, KC_P1,   KC_P2,   KC_P3,   KC_PAST, TIMES,   _______, KC_PENT,
-        _______, _______, _______, _______, _______, _______, _______, KC_P0,   KC_P0,   COMMA,   KC_PDOT, KC_PSLS,          DIVIDE,           _______,
-        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______, _______
-    ),
-};
@@ -1,8 +0,0 @@
-BOOTMAGIC_ENABLE  = no
-COMMAND_ENABLE    = yes
-CONSOLE_ENABLE    = yes
-EXTRAKEY_ENABLE   = yes
-MOUSEKEY_ENABLE   = yes
-NKRO_ENABLE       = yes
-TAP_DANCE_ENABLE  = yes
-UNICODEMAP_ENABLE = yes
@@ -10,7 +10,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
     * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-     * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RSfRCt│ ↑ │PgD│
+     * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RCtRSf│ ↑ │PgD│
     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
     * │LCtl│LGui│LAlt│         Space          │RAlG│FnLk│ │ ← │ ↓ │ → │
     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
@@ -19,7 +19,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,  KC_PSCR,
        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL,
        FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_PGUP,
-        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RSF_RCT,          KC_UP,   KC_PGDN,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RCT_RSF,          KC_UP,   KC_PGDN,
        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    RAL_RGU, FN_FNLK,                   KC_LEFT, KC_DOWN, KC_RGHT
    ),

@@ -31,7 +31,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
     * │      │M← │M↓ │M→ │MW↑│   │   │   │   │   │   │   │        │Top│
     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-     * │        │MA0│MA2│MW←│MW→│   │   │App│Vo-│Vo+│Mut│      │PgU│Btm│
+     * │        │MA0│MA2│MW←│MW→│   │   │   │Vo-│Vo+│Mut│ App  │PgU│Btm│
     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
     * │    │DtPR│DtNA│          MW↓           │    │    │ │Hom│PgD│End│
     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
@@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  NUMPAD,  KC_SLCK, KC_PAUS,
        KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD,  _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, CLEAR,            KC_INS,
        _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______,          _______,          TOP,
-        _______,          KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP,  KC_VOLD, KC_VOLU, KC_MUTE, _______,          KC_PGUP, BOTTOM,
+        _______,          KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_APP,           KC_PGUP, BOTTOM,
        _______, DST_P_R, DST_N_A,                            KC_WH_D,                   _______, _______,                   KC_HOME, KC_PGDN, KC_END
    ),

@@ -39,7 +39,6 @@ No further inputs are accepted until DEBOUNCE milliseconds have occurred.

 static debounce_counter_t *debounce_counters;
 static bool                counters_need_update;
-static bool                matrix_need_update;

 #define DEBOUNCE_ELAPSED 251
 #define MAX_DEBOUNCE (DEBOUNCE_ELAPSED - 1)
@@ -64,7 +63,7 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool
    update_debounce_counters(num_rows, current_time);
  }

-  if (changed || matrix_need_update) {
+  if (changed) {
    transfer_matrix_values(raw, cooked, num_rows, current_time);
  }
 }
@@ -89,21 +88,16 @@ void update_debounce_counters(uint8_t num_rows, uint8_t current_time) {

 // upload from raw_matrix to final matrix;
 void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) {
-  matrix_need_update = false;
  debounce_counter_t *debounce_pointer = debounce_counters;
  for (uint8_t row = 0; row < num_rows; row++) {
    matrix_row_t delta        = raw[row] ^ cooked[row];
    matrix_row_t existing_row = cooked[row];
    for (uint8_t col = 0; col < MATRIX_COLS; col++) {
      matrix_row_t col_mask = (ROW_SHIFTER << col);
-      if (delta & col_mask) {
-        if (*debounce_pointer == DEBOUNCE_ELAPSED) {
-          *debounce_pointer    = current_time;
-          counters_need_update = true;
-          existing_row ^= col_mask;  // flip the bit.
-        } else {
-          matrix_need_update = true;
-        }
+      if ((delta & col_mask) && *debounce_pointer == DEBOUNCE_ELAPSED) {
+        *debounce_pointer    = current_time;
+        counters_need_update = true;
+        existing_row ^= col_mask;  // flip the bit.
      }
      debounce_pointer++;
    }
@@ -28,7 +28,6 @@ No further inputs are accepted until DEBOUNCE milliseconds have occurred.
 #endif

 #define debounce_counter_t uint8_t
-static bool                matrix_need_update;

 static debounce_counter_t *debounce_counters;
 static bool                counters_need_update;
@@ -54,7 +53,7 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool
    update_debounce_counters(num_rows, current_time);
  }

-  if (changed || (needed_update && !counters_need_update) || matrix_need_update) {
+  if (changed || (needed_update && !counters_need_update)) {
    transfer_matrix_values(raw, cooked, num_rows, current_time);
  }
 }
@@ -77,22 +76,18 @@ void update_debounce_counters(uint8_t num_rows, uint8_t current_time) {

 // upload from raw_matrix to final matrix;
 void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) {
-  matrix_need_update = false;
  debounce_counter_t *debounce_pointer = debounce_counters;
  for (uint8_t row = 0; row < num_rows; row++) {
    matrix_row_t existing_row = cooked[row];
    matrix_row_t raw_row      = raw[row];

    // determine new value basd on debounce pointer + raw value
-    if (existing_row != raw_row) {
-      if (*debounce_pointer == DEBOUNCE_ELAPSED) {
-        *debounce_pointer    = current_time;
-        cooked[row]          = raw_row;
-        counters_need_update = true;
-      } else {
-        matrix_need_update = true;
-      }
+    if (*debounce_pointer == DEBOUNCE_ELAPSED && (existing_row != raw_row)) {
+      *debounce_pointer    = current_time;
+      cooked[row]          = raw_row;
+      counters_need_update = true;
    }
+
    debounce_pointer++;
  }
 }
@@ -81,17 +81,11 @@

 static uint8_t sc_last = 0;
 static uint16_t sc_timer = 0;
-#ifdef SPACE_CADET_MODIFIER_CARRYOVER
-static uint8_t sc_mods = 0;
-#endif

 void perform_space_cadet(keyrecord_t *record, uint8_t holdMod, uint8_t tapMod, uint8_t keycode) {
  if (record->event.pressed) {
    sc_last = holdMod;
    sc_timer = timer_read ();
-#ifdef SPACE_CADET_MODIFIER_CARRYOVER
-    sc_mods = get_mods();
-#endif
    if (IS_MOD(holdMod)) {
      register_mods(MOD_BIT(holdMod));
    }
@@ -106,13 +100,7 @@ void perform_space_cadet(keyrecord_t *record, uint8_t holdMod, uint8_t tapMod, u
          register_mods(MOD_BIT(tapMod));
        }
      }
-#ifdef SPACE_CADET_MODIFIER_CARRYOVER
-    set_weak_mods(sc_mods);
-#endif
      tap_code(keycode);
-#ifdef SPACE_CADET_MODIFIER_CARRYOVER
-    clear_weak_mods();
-#endif
      if (IS_MOD(tapMod)) {
        unregister_mods(MOD_BIT(tapMod));
      }
@@ -13,7 +13,8 @@
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#pragma once
+#ifndef QUANTUM_H
+#define QUANTUM_H

 #if defined(__AVR__)
    #include <avr/pgmspace.h>
@@ -23,11 +24,9 @@
 #if defined(PROTOCOL_CHIBIOS)
    #include "hal.h"
 #endif
-
 #include "wait.h"
 #include "matrix.h"
 #include "keymap.h"
-
 #ifdef BACKLIGHT_ENABLE
    #ifdef LED_MATRIX_ENABLE
        #include "ledmatrix.h"
@@ -35,13 +34,14 @@
        #include "backlight.h"
    #endif
 #endif
-
-#if defined(RGBLIGHT_ENABLE)
-    #include "rgblight.h"
-#elif defined(RGB_MATRIX_ENABLE)
-    // Dummy define RGBLIGHT_MODE_xxxx
-    #define RGBLIGHT_H_DUMMY_DEFINE
-    #include "rgblight.h"
+#ifdef RGBLIGHT_ENABLE
+  #include "rgblight.h"
+#else
+    #ifdef RGB_MATRIX_ENABLE
+        /* dummy define RGBLIGHT_MODE_xxxx */
+        #define RGBLIGHT_H_DUMMY_DEFINE
+        #include "rgblight.h"
+    #endif
 #endif

 #ifdef RGB_MATRIX_ENABLE
@@ -50,16 +50,16 @@

 #include "action_layer.h"
 #include "eeconfig.h"
+#include <stddef.h>
 #include "bootloader.h"
 #include "timer.h"
 #include "config_common.h"
 #include "led.h"
 #include "action_util.h"
+#include <stdlib.h>
 #include "print.h"
 #include "send_string_keycodes.h"
 #include "suspend.h"
-#include <stddef.h>
-#include <stdlib.h>

 extern layer_state_t default_layer_state;

@@ -67,16 +67,18 @@ extern layer_state_t default_layer_state;
    extern layer_state_t layer_state;
 #endif

-#if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED)
+#ifdef MIDI_ENABLE
+#ifdef MIDI_ADVANCED
    #include "process_midi.h"
 #endif
+#endif // MIDI_ENABLE

 #ifdef AUDIO_ENABLE
    #include "audio.h"
    #include "process_audio.h"
    #ifdef AUDIO_CLICKY
        #include "process_clicky.h"
-    #endif
+    #endif // AUDIO_CLICKY
 #endif

 #ifdef STENO_ENABLE
@@ -104,7 +106,7 @@ extern layer_state_t default_layer_state;
 #endif

 #ifdef TAP_DANCE_ENABLE
-    #include "process_tap_dance.h"
+  #include "process_tap_dance.h"
 #endif

 #ifdef PRINTING_ENABLE
@@ -130,7 +132,7 @@ extern layer_state_t default_layer_state;
 #endif

 #ifdef SPACE_CADET_ENABLE
-    #include "process_space_cadet.h"
+  #include "process_space_cadet.h"
 #endif

 #ifdef HD44780_ENABLE
@@ -145,38 +147,50 @@ extern layer_state_t default_layer_state;
    #include "oled_driver.h"
 #endif

-// Function substitutions to ease GPIO manipulation
-#if defined(__AVR__)
-    typedef uint8_t pin_t;
+//Function substitutions to ease GPIO manipulation
+#ifdef __AVR__
+    #define PIN_ADDRESS(p, offset) _SFR_IO8(ADDRESS_BASE + (p >> PORT_SHIFTER) + offset)

-    #define PIN_ADDRESS(p, offset)  (_SFR_IO8(ADDRESS_BASE + ((p) >> PORT_SHIFTER) + (offset)))
-    #define setPinInput(pin)        (PIN_ADDRESS(pin, 1) &= ~_BV((pin) & 0xF))
-    #define setPinInputHigh(pin)    (PIN_ADDRESS(pin, 1) &= ~_BV((pin) & 0xF), \
-                                     PIN_ADDRESS(pin, 2) |=  _BV((pin) & 0xF))
-    #define setPinInputLow(pin)     _Static_assert(0, "AVR processors cannot implement an input as pull low")
-    #define setPinOutput(pin)       (PIN_ADDRESS(pin, 1) |=  _BV((pin) & 0xF))
+    #define pin_t uint8_t
+    #define setPinInput(pin) PIN_ADDRESS(pin, 1) &= ~ _BV(pin & 0xF)
+    #define setPinInputHigh(pin) ({\
+            PIN_ADDRESS(pin, 1) &= ~ _BV(pin & 0xF);\
+            PIN_ADDRESS(pin, 2) |=   _BV(pin & 0xF);\
+            })
+    #define setPinInputLow(pin) _Static_assert(0, "AVR Processors cannot impliment an input as pull low")
+    #define setPinOutput(pin) PIN_ADDRESS(pin, 1) |= _BV(pin & 0xF)

-    #define writePinHigh(pin)       (PIN_ADDRESS(pin, 2) |=  _BV((pin) & 0xF))
-    #define writePinLow(pin)        (PIN_ADDRESS(pin, 2) &= ~_BV((pin) & 0xF))
-    #define writePin(pin, level)    ((level) ? writePinHigh(pin) : writePinLow(pin))
+    #define writePinHigh(pin) PIN_ADDRESS(pin, 2) |=  _BV(pin & 0xF)
+    #define writePinLow(pin) PIN_ADDRESS(pin, 2) &= ~_BV(pin & 0xF)
+    static inline void writePin(pin_t pin, uint8_t level){
+        if (level){
+            PIN_ADDRESS(pin, 2) |=  _BV(pin & 0xF);
+        } else {
+            PIN_ADDRESS(pin, 2) &= ~_BV(pin & 0xF);
+        }
+    }

-    #define readPin(pin)            ((bool)(PIN_ADDRESS(pin, 0) & _BV((pin) & 0xF)))
+    #define readPin(pin) ((bool)(PIN_ADDRESS(pin, 0) & _BV(pin & 0xF)))
 #elif defined(PROTOCOL_CHIBIOS)
-    typedef ioline_t pin_t;
+    #define pin_t ioline_t
+    #define setPinInput(pin) palSetLineMode(pin, PAL_MODE_INPUT)
+    #define setPinInputHigh(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)
+    #define setPinInputLow(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)
+    #define setPinOutput(pin) palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)

-    #define setPinInput(pin)        palSetLineMode(pin, PAL_MODE_INPUT)
-    #define setPinInputHigh(pin)    palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)
-    #define setPinInputLow(pin)     palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)
-    #define setPinOutput(pin)       palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)
+    #define writePinHigh(pin) palSetLine(pin)
+    #define writePinLow(pin) palClearLine(pin)
+    static inline void writePin(pin_t pin, uint8_t level){
+        if (level){
+            palSetLine(pin);
+        } else {
+            palClearLine(pin);
+        }
+    }

-    #define writePinHigh(pin)       palSetLine(pin)
-    #define writePinLow(pin)        palClearLine(pin)
-    #define writePin(pin, level)    ((level) ? writePinHigh(pin) : writePinLow(pin))
-
-    #define readPin(pin)            palReadLine(pin)
+    #define readPin(pin) palReadLine(pin)
 #endif

-// Send string macros
 #define STRINGIZE(z) #z
 #define ADD_SLASH_X(y) STRINGIZE(\x ## y)
 #define SYMBOL_STR(x) ADD_SLASH_X(x)
@@ -189,7 +203,6 @@ extern layer_state_t default_layer_state;
 #define SS_DOWN(keycode) "\2" SYMBOL_STR(keycode)
 #define SS_UP(keycode) "\3" SYMBOL_STR(keycode)

-// `string` arguments must not be parenthesized
 #define SS_LCTRL(string) SS_DOWN(X_LCTRL) string SS_UP(X_LCTRL)
 #define SS_LGUI(string) SS_DOWN(X_LGUI) string SS_UP(X_LGUI)
 #define SS_LCMD(string) SS_LGUI(string)
@@ -199,12 +212,10 @@ extern layer_state_t default_layer_state;
 #define SS_RALT(string) SS_DOWN(X_RALT) string SS_UP(X_RALT)
 #define SS_ALGR(string) SS_RALT(string)

-#define SEND_STRING(string) send_string_P(PSTR(string))
-
+#define SEND_STRING(str) send_string_P(PSTR(str))
 extern const bool ascii_to_shift_lut[0x80];
 extern const bool ascii_to_altgr_lut[0x80];
 extern const uint8_t ascii_to_keycode_lut[0x80];
-
 void send_string(const char *str);
 void send_string_with_delay(const char *str, uint8_t interval);
 void send_string_P(const char *str);
@@ -233,10 +244,10 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record);
 bool process_record_user(uint16_t keycode, keyrecord_t *record);

 #ifndef BOOTMAGIC_LITE_COLUMN
-    #define BOOTMAGIC_LITE_COLUMN 0
+  #define BOOTMAGIC_LITE_COLUMN 0
 #endif
 #ifndef BOOTMAGIC_LITE_ROW
-    #define BOOTMAGIC_LITE_ROW 0
+  #define BOOTMAGIC_LITE_ROW 0
 #endif

 void bootmagic_lite(void);
@@ -257,7 +268,7 @@ void backlight_task_internal(void);
 void backlight_on(uint8_t backlight_pin);
 void backlight_off(uint8_t backlight_pin);

-    #ifdef BACKLIGHT_BREATHING
+#ifdef BACKLIGHT_BREATHING
 void breathing_task(void);
 void breathing_enable(void);
 void breathing_pulse(void);
@@ -271,9 +282,9 @@ void breathing_period_default(void);
 void breathing_period_set(uint8_t value);
 void breathing_period_inc(void);
 void breathing_period_dec(void);
-    #endif
 #endif

+#endif
 void send_dword(uint32_t number);
 void send_word(uint16_t number);
 void send_byte(uint8_t number);
@@ -284,3 +295,5 @@ void led_set_user(uint8_t usb_led);
 void led_set_kb(uint8_t usb_led);

 void api_send_unicode(uint32_t unicode);
+
+#endif
@@ -1,5 +1,5 @@
 /*
-Copyright %YEAR% %YOUR_NAME%
+Copyright 2019 %YOUR_NAME%

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -1,4 +1,4 @@
-/* Copyright %YEAR% %YOUR_NAME%
+/* Copyright 2019 %YOUR_NAME%
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -1,4 +1,4 @@
-/* Copyright %YEAR% %YOUR_NAME%
+/* Copyright 2019 %YOUR_NAME%
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -1,4 +1,4 @@
-/* Copyright %YEAR% %YOUR_NAME%
+/* Copyright 2019 %YOUR_NAME%
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -1,4 +1,4 @@
-/* Copyright %YEAR% %YOUR_NAME%
+/* Copyright 2019 %YOUR_NAME%
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -1,5 +1,5 @@
 /*
-Copyright %YEAR% %YOUR_NAME%
+Copyright 2017 Luiz Ribeiro <[email protected]>

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -1,3 +1,18 @@
+# Copyright 2019 Luiz Ribeiro <[email protected]>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
 # MCU name
 MCU = atmega32a
 PROTOCOL = VUSB
@@ -1,4 +1,4 @@
-/* Copyright %YEAR% %YOUR_NAME%
+/* Copyright 2019 %YOUR_NAME%
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -1,3 +1,13 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
 #pragma once

 #include "config.h"
@@ -7,6 +7,14 @@
 [![GitHub contributors](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
 [![GitHub forks](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)

+# NOTICE: THIS IS A TESTING BRANCH
+
+This is the `breaking_changes` branch for Aug 2019. You can [read more in the tracking issue](https://github.com/qmk/qmk_firmware/issues/6146).
+
+We encourage you to try this branch out and see if there are any bugs. Our goal is to merge this branch to `master` on Aug 30. Please [report any bugs](https://github.com/qmk/qmk_firmware/issues/new?template=bug_report.md) you find.
+
+Original readme.md continues:
+
 This is a keyboard firmware based on the [tmk\_keyboard firmware](https://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR and ARM controllers, and more specifically, the [OLKB product line](https://olkb.com), the [ErgoDox EZ](https://ergodox-ez.com) keyboard, and the [Clueboard product line](https://clueboard.co).

 ## Documentation
@@ -201,6 +201,7 @@ DFU_ARGS ?=
 ifneq ("$(SERIAL)","")
 	DFU_ARGS += -S $(SERIAL)
 endif
+DFU_SUFFIX_ARGS ?=

 ST_LINK_ARGS ?=

@@ -208,6 +209,7 @@ ST_LINK_ARGS ?=
 EXTRALIBDIRS = $(RULESPATH)/ld

 DFU_UTIL ?= dfu-util
+DFU_SUFFIX ?= dfu-suffix
 ST_LINK_CLI ?= st-link_cli

 # Generate a .qmk for the QMK-FF
@@ -272,3 +274,7 @@ teensy: $(BUILD_DIR)/$(TARGET).hex cpfirmware sizeafter
 	$(TEENSY_LOADER_CLI) -mmcu=$(MCU_LDSCRIPT) -w -v $(BUILD_DIR)/$(TARGET).hex

 bin: $(BUILD_DIR)/$(TARGET).bin sizeafter
+	if [ ! -z "$(DFU_SUFFIX_ARGS)" ]; then \
+		$(DFU_SUFFIX) $(DFU_SUFFIX_ARGS) -a $(BUILD_DIR)/$(TARGET).bin 1>/dev/null ;\
+	fi
+	$(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin;
@@ -223,10 +223,6 @@ $(foreach LOBJ, $(NO_LTO_OBJ), $(eval $(call NO_LTO,$(LOBJ))))

 MOVE_DEP = mv -f $(patsubst %.o,%.td,$@) $(patsubst %.o,%.d,$@)

-# Add QMK specific flags
-DFU_SUFFIX ?= dfu-suffix
-DFU_SUFFIX_ARGS ?=
-

 elf: $(BUILD_DIR)/$(TARGET).elf
 hex: $(BUILD_DIR)/$(TARGET).hex
@@ -283,10 +279,6 @@ gccversion :
 	@$(SILENT) || printf "$(MSG_BIN) $@" | $(AWK_CMD)
 	$(eval CMD=$(BIN) $< $@ || exit 0)
 	@$(BUILD_CMD)
-	if [ ! -z "$(DFU_SUFFIX_ARGS)" ]; then \
-		$(DFU_SUFFIX) $(DFU_SUFFIX_ARGS) -a $(BUILD_DIR)/$(TARGET).bin 1>/dev/null ;\
-	fi
-	$(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin;

 BEGIN = gccversion sizebefore

@@ -14,9 +14,8 @@
 #define NO_ACTION_ONESHOT

 #define PERMISSIVE_HOLD
-#define TAPPING_TERM        200
-#define TAPPING_TOGGLE      2
-#define TAP_HOLD_CAPS_DELAY 50
+#define TAPPING_TERM    200
+#define TAPPING_TOGGLE  2

 #define UNICODE_CYCLE_PERSIST  false
 #define UNICODE_SELECTED_MODES UC_WINC, UC_WIN, UC_LNX
@@ -1,9 +0,0 @@
-#pragma once
-
-// Most tactile encoders have detents every 4 stages
-#define ENCODER_RESOLUTION 4
-
-#define IGNORE_MOD_TAP_INTERRUPT
-#define PERMISSIVE_HOLD
-#define TAPPING_TOGGLE 2
-#define TAPPING_TERM 200
@@ -1,70 +0,0 @@
-#include "mattly.h"
-
-__attribute__ ((weak))
-layer_state_t layer_state_set_keymap (layer_state_t state) {
-  return state;
-}
-
-void set_lights_default(void) {
-    #ifdef RGBLIGHT_ENABLE
-        if (IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) {
-            rgblight_sethsv_noeeprom(HSV_CAPS);
-        } else {
-            rgblight_sethsv_noeeprom(HSV_DEFAULT);
-        }
-    #endif
-}
-
-void layer_state_set_rgb(layer_state_t state) {
-#ifdef RGBLIGHT_ENABLE
-    switch (biton32(state)) {
-        case _QWERTY:
-            set_lights_default();
-            break;
-        case _SYMBOL:
-            rgblight_sethsv_noeeprom(HSV_SYMBOL);
-            break;
-        case _NAVNUM:
-            rgblight_sethsv_noeeprom(HSV_NAVNUM);
-            break;
-        case _FUNCT:
-            rgblight_sethsv_noeeprom(HSV_FUNCT);
-            break;
-    }
-#endif
-}
-
-
-layer_state_t layer_state_set_user (layer_state_t state) {
-  state = update_tri_layer_state(state, _SYMBOL, _NAVNUM, _FUNCT);
-  layer_state_set_rgb(state);
-  return layer_state_set_keymap (state);
-}
-
-void on_reset(void) {
-    #ifdef RGBLIGHT_ENABLE
-    rgblight_sethsv_noeeprom(HSV_RESET);
-    #endif
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-    switch (keycode) {
-        case KC_CAPS:
-            #ifdef RGBLIGHT_ENABLE
-            set_lights_default();
-            #endif
-            return true;
-        case RESET:
-            on_reset();
-            return true;
-        default:
-            return true;
-    }
-}
-
-void keyboard_post_init_user(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_enable_noeeprom();
-    set_lights_default();
-#endif
-}
@@ -1,83 +0,0 @@
-/* Copyright 2019 Matthew Lyon
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef USERSPACE
-#define USERSPACE
-
-#include "quantum.h"
-
-enum {
-    _QWERTY,
-    _NAVNUM,
-    _SYMBOL,
-    _FUNCT,
-};
-
-// left hand
-#define ESC_HYP MT(MOD_HYPR, KC_ESC)
-#define BSP_NUM LT(_NAVNUM, KC_BSPC)
-#define ENT_SFT MT(MOD_LSFT, KC_ENT)
-#define SPC_SFT MT(MOD_LSFT, KC_SPC)
-
-// right hand
-#define SPC_SFT MT(MOD_LSFT, KC_SPC)
-#define TAB_SYM LT(_SYMBOL, KC_TAB)
-#define DEL_WRP MT(MOD_LCTL | MOD_LALT | MOD_LGUI, KC_DEL)
-
-#define NAVLOCK TG(_NAVNUM)
-#define SYMLOCK TG(_SYMBOL)
-
-
-// QWERTY
-
-#define A_CTRL  MT(MOD_LCTL, KC_A)
-#define S_ALT   MT(MOD_LALT, KC_S)
-#define D_GUI   MT(MOD_LGUI, KC_D)
-#define F_SHFT  MT(MOD_LSFT, KC_F)
-#define J_SHFT  MT(MOD_RSFT, KC_J)
-#define K_GUI   MT(MOD_RGUI, KC_K)
-#define L_ALT   MT(MOD_RALT, KC_L)
-#define MINSCTL MT(MOD_RCTL, KC_MINS)
-
-#define BWORD   LALT(KC_LEFT)
-#define FWORD   LALT(KC_RIGHT)
-
-// OS X default keys
-#define NWIN    LGUI(KC_GRV)        // Next Window
-#define PWIN    LGUI(LSFT(KC_GRV))  // Prev Window
-#define NTAB    LGUI(LSFT(KC_RBRC)) // Next Tab
-#define PTAB    LGUI(LSFT(KC_LBRC)) // Prev Tab
-#define NAVBACK LGUI(KC_LBRC)       // Navigate Forward
-#define NAVFWD  LGUI(KC_RBRC)       // Navigate Back
-
-// my personal mappings to window manager commands
-#define XALLWIN HYPR(KC_F14)
-#define XDESKTP HYPR(KC_F15)
-#define XNXTSPC HYPR(KC_F16)
-#define XPRVSPC HYPR(KC_F17)
-#define XNOTIFY HYPR(KC_F18)
-
-#ifdef RGBLIGHT_ENABLE
-#define HSV_CAPS     42, 255, 255
-#define HSV_DEFAULT  30, 218, 255
-#define HSV_SYMBOL   22, 255, 255
-#define HSV_NAVNUM  245, 200, 255
-#define HSV_FUNCT   233, 255, 255
-#define HSV_RESET   180, 255, 255
-#endif
-
-#endif
-
@@ -1,10 +0,0 @@
-# mattly's layouts
-
-My layouts are based around:
-
-* making the most from small layouts on keyboards like the iris or planck
-* moving held-modifiers from pinkies to thumbs or home row, giving many keys dual purposes via mod/layer taps
-* easy home-row navigation on a layer, using standard keys, available to all programs, not just a specially-configured editor
-* easy access to punctuation symbols used in the programming languages I work in
-
-[Here is an image](https://lyonheart.us/etc/mattly-keymap.png) with an outdated description of my keymap
@@ -1,2 +0,0 @@
-SRC += mattly.c
-MOUSEKEY_ENABLE = yes
@@ -70,18 +70,6 @@ replace_placeholders() {
    echo " done"
 }

-# Replace %YEAR% with the current year.
-replace_year_placeholders() {
-    local replace_year_filenames=(
-        "${keyboard_dir}/config.h"
-        "${keyboard_dir}/${keyboard_name}.c"
-        "${keyboard_dir}/${keyboard_name}.h"
-        "${keyboard_dir}/keymaps/default/config.h"
-        "${keyboard_dir}/keymaps/default/keymap.c"
-    )
-    replace_placeholders "%YEAR%" "$(date +%Y)" "${replace_year_filenames[@]}"
-}
-
 # Replace %KEYBOARD% with the keyboard name.
 replace_keyboard_placeholders() {
    local replace_keyboard_filenames=(
@@ -161,7 +149,6 @@ echo

 copy_templates
 set_sed_i
-replace_year_placeholders
 replace_keyboard_placeholders
 [ -n "$username" ] && replace_name_placeholders
				`@@ -1 +0,0 @@`
				`See my readme in [users/mattly](../../../../../users/mattly/readme.md)`