Fix one shot swaphands compiler error when NO_ACTION_ONESHOT is defined (#9296)

* init

* add RETRO_TAP; tap anyway after TAP_TERM, if no interruption

* RETRO_TAP works for other types of taps

* revert to upstream/master

* explain this fork in readme

* use one readme.md file instaed

* fix the error if NO_ACTION_ONESHOT is defined

* restore readme.md to upstream master

Co-authored-by: Tsan-Kuang Lee <[email protected]>

docs/adc_driver.md

@@ -22,7 +22,7 @@ Then place this include at the top of your code:
 
 ### AVR
 
-|Channel|AT90USB64/128|ATmega16/32U4|ATmega32A|ATmega328P|
+|Channel|AT90USB64/128|ATmega16/32U4|ATmega32A|ATmega328/P|
 |-------|-------------|-------------|---------|----------|
 |0      |`F0`         |`F0`         |`A0`     |`C0`      |
 |1      |`F1`         |`F1`         |`A1`     |`C1`      |
@@ -39,7 +39,7 @@ Then place this include at the top of your code:
 |12     |             |`B5`         |         |          |
 |13     |             |`B6`         |         |          |
 
-<sup>\* The ATmega328P possesses two extra ADC channels; however, they are not present on the DIP pinout, and are not shared with GPIO pins. You can use `adc_read()` directly to gain access to these.</sup>
+<sup>\* The ATmega328/P possesses two extra ADC channels; however, they are not present on the DIP pinout, and are not shared with GPIO pins. You can use `adc_read()` directly to gain access to these.</sup>
 
 ### ARM
 

docs/compatible_microcontrollers.md

@@ -14,6 +14,7 @@ Certain MCUs which do not have native USB will use [V-USB](https://www.obdev.at/
 
 * [ATmega32A](https://www.microchip.com/wwwproducts/en/ATmega32A)
 * [ATmega328P](https://www.microchip.com/wwwproducts/en/ATmega328P)
+* [ATmega328](https://www.microchip.com/wwwproducts/en/ATmega328)
 
 ## ARM
 

docs/faq_build.md

@@ -28,33 +28,30 @@ sudo udevadm trigger
 **/etc/udev/rules.d/50-atmel-dfu.rules:**
 ```
 # Atmel ATMega32U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", MODE:="0666"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess", RUN{builtin}+="uaccess"
 # Atmel USBKEY AT90USB1287
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", MODE:="0666"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess", RUN{builtin}+="uaccess"
 # Atmel ATMega32U2
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", MODE:="0666"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", TAG+="uaccess", RUN{builtin}+="uaccess"
 ```
 
-**/etc/udev/rules.d/52-tmk-keyboard.rules:**
-```
-# tmk keyboard products     https://github.com/tmk/tmk_keyboard
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
-```
 **/etc/udev/rules.d/54-input-club-keyboard.rules:**
 
 ```
 # Input Club keyboard bootloader
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", ATTRS{idProduct}=="b007", TAG+="uaccess", RUN{builtin}+="uaccess"
 ```
 
 **/etc/udev/rules.d/55-caterina.rules:**
 ```
 # ModemManager should ignore the following devices
-ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
 ```
 
-**Note:** ModemManager filtering only works when not in strict mode, the following commands can update that settings:
+**Note:** With older (before 1.12) ModemManager, filtering only works when not in strict mode, the following commands can update that settings:
 ```console
 sudo sed -i 's/--filter-policy=strict/--filter-policy=default/' /lib/systemd/system/ModemManager.service
 sudo systemctl daemon-reload
@@ -64,15 +61,15 @@ sudo systemctl restart ModemManager
 **/etc/udev/rules.d/56-dfu-util.rules:**
 ```
 # stm32duino
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", MODE:="0666"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
 # Generic stm32
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", TAG+="uaccess", RUN{builtin}+="uaccess"
 ```
 
 **/etc/udev/rules.d/57-bootloadhid.rules:**
 ```
 # bootloadHID
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", MODE:="0666"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", TAG+="uaccess", RUN{builtin}+="uaccess"
 ```
 
 ### Serial device is not detected in bootloader mode on Linux

docs/feature_backlight.md

@@ -89,7 +89,7 @@ BACKLIGHT_DRIVER = pwm
 
 Hardware PWM is supported according to the following table:
 
-|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328P|
+|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328/P|
 |-------------|-------------|-------------|-------------|---------|----------|
 |`B1`         |             |             |             |         |Timer 1   |
 |`B2`         |             |             |             |         |Timer 1   |

docs/ja/feature_ps2_mouse.md

@@ -0,0 +1,293 @@
+# PS/2 マウスサポート :id=ps2-mouse-support
+
+<!---
+  original document: 0.8.147:docs/feature_ps2_mouse.md
+  git diff 0.8.147 HEAD -- docs/feature_ps2_mouse.md | cat
+-->
+
+PS/2 マウス (例えばタッチパッドあるいはトラックポイント)を複合デバイスとしてキーボードに接続することができます。
+
+トラックポイントを接続するには、トラックポイントモジュールを入手し (つまり、Thinkpad キーボードから部品を取って)、モジュールの各ピンの機能を特定し、コントローラとトラックポイントモジュールの間に必要な回路を作成する必要があります。詳細については、Deskthority Wiki の[トラックポイントハードウェア](https://deskthority.net/wiki/TrackPoint_Hardware)ページを参照してください。
+
+PS/2 デバイスの接続は、USART(最善)、割り込み(次善)、 または busywait(非推奨)の3つのやり方が有ります。
+
+## トラックポイントとコントローラ間の回路 :id=the-circuitry-between-trackpoint-and-controller
+
+動作させるには、DATA と CLK のふたつのラインを 4.7k の抵抗で 5V にプルアップしてやる必要があります。
+
+```
+          DATA ----------+--------- PIN
+                         |
+                        4.7K
+                         |
+MODULE    5+  --------+--+--------- PWR   CONTROLLER
+                      |
+                     4.7K
+                      |    
+          CLK   ------+------------ PIN
+```
+
+
+## Busywait バージョン :id=busywait-version
+
+注意: これは非推奨です。ギクシャクした動きや、未送信の入力が発生するかもしれません。可能であれば、割り込みまたは USART バージョンを使ってください。
+
+rules.mk で:
+
+```makefile
+PS2_MOUSE_ENABLE = yes
+PS2_USE_BUSYWAIT = yes
+```
+
+キーボードの config.h で:
+
+```c
+#ifdef PS2_USE_BUSYWAIT
+#   define PS2_CLOCK_PORT  PORTD
+#   define PS2_CLOCK_PIN   PIND
+#   define PS2_CLOCK_DDR   DDRD
+#   define PS2_CLOCK_BIT   1
+#   define PS2_DATA_PORT   PORTD
+#   define PS2_DATA_PIN    PIND
+#   define PS2_DATA_DDR    DDRD
+#   define PS2_DATA_BIT    2
+#endif
+```
+
+## 割り込みバージョン :id=interrupt-version
+
+以下の例はクロックのために D2 を、データのために D5 を使います。クロックには任意の INT あるいは PCINT ピンを、データには任意のピンを使うことができます。
+
+rules.mk で:
+
+```makefile
+PS2_MOUSE_ENABLE = yes
+PS2_USE_INT = yes
+```
+
+キーボードの config.h で:
+
+```c
+#ifdef PS2_USE_INT
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   2
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    5
+
+#define PS2_INT_INIT()  do {    \
+    EICRA |= ((1<<ISC21) |      \
+              (0<<ISC20));      \
+} while (0)
+#define PS2_INT_ON()  do {      \
+    EIMSK |= (1<<INT2);         \
+} while (0)
+#define PS2_INT_OFF() do {      \
+    EIMSK &= ~(1<<INT2);        \
+} while (0)
+#define PS2_INT_VECT   INT2_vect
+#endif
+```
+
+## USART バージョン :id=usart-version
+
+ATMega32u4 で USART を使うには、クロックのために PD5 を、データのために PD2 を使う必要があります。それらのいずれかが利用できない場合は、割り込みバージョンを使う必要があります。
+
+rules.mk で:
+
+```makefile
+PS2_MOUSE_ENABLE = yes
+PS2_USE_USART = yes
+```
+
+キーボードの config.h で:
+
+```c
+#ifdef PS2_USE_USART
+#define PS2_CLOCK_PORT  PORTD
+#define PS2_CLOCK_PIN   PIND
+#define PS2_CLOCK_DDR   DDRD
+#define PS2_CLOCK_BIT   5
+#define PS2_DATA_PORT   PORTD
+#define PS2_DATA_PIN    PIND
+#define PS2_DATA_DDR    DDRD
+#define PS2_DATA_BIT    2
+
+/* 同期、奇数パリティ、1-bit ストップ、8-bit データ、立ち下がりエッジでサンプル */
+/* CLOCK の DDR を入力としてスレーブに設定 */
+#define PS2_USART_INIT() do {   \
+    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
+    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
+    UCSR1C = ((1 << UMSEL10) |  \
+              (3 << UPM10)   |  \
+              (0 << USBS1)   |  \
+              (3 << UCSZ10)  |  \
+              (0 << UCPOL1));   \
+    UCSR1A = 0;                 \
+    UBRR1H = 0;                 \
+    UBRR1L = 0;                 \
+} while (0)
+#define PS2_USART_RX_INT_ON() do {  \
+    UCSR1B = ((1 << RXCIE1) |       \
+              (1 << RXEN1));        \
+} while (0)
+#define PS2_USART_RX_POLL_ON() do { \
+    UCSR1B = (1 << RXEN1);          \
+} while (0)
+#define PS2_USART_OFF() do {    \
+    UCSR1C = 0;                 \
+    UCSR1B &= ~((1 << RXEN1) |  \
+                (1 << TXEN1));  \
+} while (0)
+#define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
+#define PS2_USART_RX_DATA       UDR1
+#define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
+#define PS2_USART_RX_VECT       USART1_RX_vect
+#endif
+```
+
+## 追加の設定 :id=additional-settings
+
+### PS/2 マウス機能 :id=ps2-mouse-features
+
+以下の PS/2 マウスプロトコルによってサポートされる設定を有効にします。
+
+```c
+/* デフォルトのストリームモードの代わりにリモートモードを使います (リンクを見てください) */
+#define PS2_MOUSE_USE_REMOTE_MODE
+
+/* マウスあるいはタッチパッドでスクロールホイールあるいはスクロールジェスチャーを有効にします */
+#define PS2_MOUSE_ENABLE_SCROLLING
+
+/* 一部のマウスでは、スクロールマスクを設定する必要があります。デフォルトは 0xFF です。*/
+#define PS2_MOUSE_SCROLL_MASK 0x0F
+
+/* ホストに送信する前に、動きに変換を適用します (リンクを見てください) */
+#define PS2_MOUSE_USE_2_1_SCALING
+
+/* ps2ホストを初期化した後の待機時間 */
+#define PS2_MOUSE_INIT_DELAY 1000 /* Default */
+```
+
+ps2_mouse.h をインクルードして、以下の関数を呼び出すこともできます。
+
+```c
+void ps2_mouse_disable_data_reporting(void);
+
+void ps2_mouse_enable_data_reporting(void);
+
+void ps2_mouse_set_remote_mode(void);
+
+void ps2_mouse_set_stream_mode(void);
+
+void ps2_mouse_set_scaling_2_1(void);
+
+void ps2_mouse_set_scaling_1_1(void);
+
+void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution);
+
+void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate);
+```
+
+### 細かい調整 :id=fine-control
+
+マウスの感度と速度を変更するには以下の定義を使います。
+注意: 同じ効果のために `ps2_mouse_set_resolution` も使うことができます (ほとんどのタッチパッドではサポートされません)。
+
+```c
+#define PS2_MOUSE_X_MULTIPLIER 3
+#define PS2_MOUSE_Y_MULTIPLIER 3
+#define PS2_MOUSE_V_MULTIPLIER 1
+```
+
+### スクロールボタン :id=scroll-button
+
+トラックポイントを使っている場合は、スクロールのためにそれを使えるようにしたいでしょう。
+押された時にマウスを移動させる代わりにスクロールさせる「スクロールボタン」を有効にすることができます。
+この機能を有効にするには、以下のようにスクロールボタンマスクを設定する必要があります:
+
+```c
+#define PS2_MOUSE_SCROLL_BTN_MASK (1<<PS2_MOUSE_BUTTON_MIDDLE) /* Default */
+```
+
+スクロールボタン機能を無効にするには:
+
+```c
+#define PS2_MOUSE_SCROLL_BTN_MASK 0
+```
+
+利用可能なボタンは:
+
+```c
+#define PS2_MOUSE_BTN_LEFT      0
+#define PS2_MOUSE_BTN_RIGHT     1
+#define PS2_MOUSE_BTN_MIDDLE    2
+```
+
+ボタン定数を `|` で結合したマスクでボタンを組み合わせることができます。
+
+スクロールボタンマスクを設定したら、スクロールボタンの送信間隔を設定する必要があります。
+これは、スクロールボタンが離された場合に、スクロールボタンがホストに送信されるまでの間隔です。
+この時間が経過すると、マウスはスクロールして送信されなくなります。
+
+```c
+#define PS2_MOUSE_SCROLL_BTN_SEND 300 /* Default */
+```
+
+スクロールボタンの送信を無効にするには:
+
+```c
+#define PS2_MOUSE_SCROLL_BTN_SEND 0
+```
+
+以下の定義でスクロールの細かい制御がサポートされます:
+
+```c
+#define PS2_MOUSE_SCROLL_DIVISOR_H 2
+#define PS2_MOUSE_SCROLL_DIVISOR_V 2
+```
+
+### マウスとスクロールの軸の反転 :id=invert-mouse-and-scroll-axes
+
+X 軸と Y 軸を反転するには、以下を config.h に配置します:
+
+```c
+#define PS2_MOUSE_INVERT_X
+#define PS2_MOUSE_INVERT_Y
+```
+
+スクロールの軸を逆にするには、以下を config.h に配置します:
+
+```c
+#define PS2_MOUSE_INVERT_H
+#define PS2_MOUSE_INVERT_V
+```
+
+### マウスの軸の回転 :id=rotate-mouse-axes
+
+デバイスの出力を時計回りに 90 か 180 か 270 度変換します。
+
+デバイスの向きを補正する場合は、出力を逆の方向に同じ量だけ回転します。例えば、通常のデバイスの向きが北向きの場合、以下のように補正します:
+
+```c
+#define PS2_MOUSE_ROTATE 270 /* 東向きのデバイスの向きの補正*/
+```
+```c
+#define PS2_MOUSE_ROTATE 180 /* 南向きのデバイスの向きの補正*/
+```
+```c
+#define PS2_MOUSE_ROTATE 90 /* 西向きのデバイスの向きの補正*/
+```
+
+### デバッグ設定 :id=debug-settings
+
+マウスをデバッグするには、`debug_mouse = true` を追加するか、ブートマジックを使って有効にします。
+
+```c
+/* マウスレポートをデバッグするには */
+#define PS2_MOUSE_DEBUG_HID
+#define PS2_MOUSE_DEBUG_RAW
+```

docs/ja/feature_swap_hands.md

@@ -0,0 +1,36 @@
+# スワップハンドアクション
+
+<!---
+  original document: 0.8.177:docs/feature_swap_hands.md
+  git diff 0.8.177 HEAD -- docs/feature_swap_hands.md | cat
+-->
+
+スワップハンドアクションにより、別のレイヤーを必要とせずに片手入力をサポートします。Makefile に `SWAP_HANDS_ENABLE` を設定し、キーマップに `hand_swap_config` エントリを定義します。これで `ACTION_SWAP_HANDS` コマンドキーが押されるたびにキーボードがミラーされます。例えば、QWERTY で "Hello, World" を入力するには、`^Ge^s^s^w^c W^wr^sd` を入力します。
+
+## 設定
+
+設定テーブルは列/行から新しい列/行にマップするための単純な2次元配列です。Planck の `hand_swap_config` の例:
+
+```C
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+  {{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
+  {{11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
+  {{11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
+  {{11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}},
+};
+```
+
+配列のインデックスはマトリックスと同様に逆になり、値の型は `{col, row}` である `keypos_t` で、全ての値はゼロベースであることに注意してください。上の例では、`hand_swap_config[2][4]` (第3行, 第5列)は `{7, 2}` (第3行, 第8列) を返します。はい。紛らわしいです。
+
+## キーコードの入れ替え
+
+| キー | 説明 |
+|-----------|-------------------------------------------------------------------------|
+| `SH_T(key)` | タップで `key` を送信する。押している時の一時的な入れ替え。 |
+| `SH_ON` | 入れ替えをオンにして、そのままにする。 |
+| `SH_OFF` | 入れ替えをオフにして、そのままにする。既知の状態に戻るのに適しています。 |
+| `SH_MON` | 押すとスワップハンドし、放すと通常に戻る (一時的)。 |
+| `SH_MOFF` | 一時的に入れ替えをオフする。 |
+| `SH_TG` | キーを押すたびに入れ替えのオンとオフを切り替える。 |
+| `SH_TT` | タップで切り替える。押されている時の一時的なもの。 |
+| `SH_OS` | ワンショットスワップハンド: 押されている時あるいは次のキーを押すまで切り替える。 |

docs/ja/feature_terminal.md

@@ -0,0 +1,112 @@
+# ターミナル
+
+<!---
+  original document: 0.8.147:docs/feature_terminal.md
+  git diff 0.8.147 HEAD -- docs/feature_terminal.md | cat
+-->
+
+> この機能は現在のところ*巨大*であり、おそらく大量のメモリを搭載したキーボード、または楽しみのためにのみ配置する必要があります。
+
+ターミナル機能はテキストエディタを介してキーストロークで通信するように設計されたコマンドラインのようなインタフェースです。エディタで自動インデント機能をオフにすることは有益です。
+
+有効にするには、以下を `rules.mk` または `Makefile` に貼り付けます:
+
+    TERMINAL_ENABLE = yes
+
+そして、オンまたはオフにするために、`TERM_ON` および `TERM_OFF` キーコードを使います。
+
+有効な場合、`> ` プロンプトが現れ、ここでコマンドやバックスペース(オーディオが有効な場合は、先頭に到達するとベルが鳴ります)を入力することができ、エンターを入力するとコマンドを送信します。矢印キーは現在のところ無効なため、混乱することはありません。マウスでカーソルを移動することはお勧めしません。
+
+`#define TERMINAL_HELP` は、このページでは実際には必要のない他の出力ヘルパーを有効にします。
+
+"上矢印" および "下矢印" により、過去に入力した5つのコマンドを順に切り替えることができます。
+
+## 今後のアイデア
+
+* キーボード/ユーザ拡張可能なコマンド
+* より小さなフットプリント
+* 矢印キーのサポート
+* コマンド履歴 - 完了
+* SD カードのサポート
+* バッファディスプレイのための LCD サポート
+* キーコード -> 名称の対応表
+* レイヤー状態
+* *アナログ/デジタル ポートの読み込み/書き込み*
+* RGB モード関連機能
+* マクロ定義
+* EEPROM の読み込み/書き込み
+* オーディオ制御
+
+## 現在のコマンド
+
+### `about`
+
+現在の QMK のバージョンとビルドした日の出力:
+
+```
+> about
+QMK Firmware
+  v0.5.115-7-g80ed73-dirty
+  Built: 2017-08-29-20:24:44
+```
+
+
+### `print-buffer`
+
+最後に入力した5つのコマンドの出力
+
+```
+> print-buffer
+0. print-buffer
+1. help
+2. about
+3. keymap 0
+4. help
+5. flush-buffer
+```
+
+### `flush-buffer`
+
+コマンドバッファをクリア
+```
+> flush-buffer
+Buffer cleared!
+```
+
+
+### `help`
+
+
+利用可能なコマンドの出力:
+
+```
+> help
+commands available:
+  about help keycode keymap exit print-buffer flush-buffer
+```
+
+### `keycode <layer> <row> <col>`
+
+特定のレイヤー、行および列のキーコード値の出力:
+
+```
+> keycode 0 1 0
+0x29 (41)
+```
+
+### `keymap <layer>`
+
+特定のレイヤーの全てのキーマップの出力
+
+```
+> keymap 0
+0x002b, 0x0014, 0x001a, 0x0008, 0x0015, 0x0017, 0x001c, 0x0018, 0x000c, 0x0012, 0x0013, 0x002a,
+0x0029, 0x0004, 0x0016, 0x0007, 0x0009, 0x000a, 0x000b, 0x000d, 0x000e, 0x000f, 0x0033, 0x0034,
+0x00e1, 0x001d, 0x001b, 0x0006, 0x0019, 0x0005, 0x0011, 0x0010, 0x0036, 0x0037, 0x0038, 0x0028,
+0x5cd6, 0x00e0, 0x00e2, 0x00e3, 0x5cd4, 0x002c, 0x002c, 0x5cd5, 0x0050, 0x0051, 0x0052, 0x004f,
+>
+```
+
+### `exit`
+
+ターミナルの終了 - `TERM_OFF` と同じ。

docs/ja/feature_wpm.md

@@ -0,0 +1,24 @@
+# Word Per Minute (WPM) の計算
+
+<!---
+  original document: 0.9.0:docs/feature_wpm.md
+  git diff 0.9.0 HEAD -- docs/feature_wpm.md | cat
+-->
+
+WPM 機能は、キーストローク間の時間から1分あたりの平均（移動平均）単語数を計算し、様々な用途で利用できるようにします。
+
+`rules.mk` に以下を追加することで WPM システムを有効にします:
+
+    WPM_ENABLE = yes
+
+ソフトシリアルを使っている分割キーボードについては、計算された WPM スコアがマスター側とスレーブ側で利用可能です。
+
+## 公開関数
+
+`uint8_t get_current_wpm(void);`
+この関数は符号なし整数で現在の WPM を返します。
+
+
+## WPM 計算のためのカスタマイズ化されたキー
+
+デフォルトでは、WPM スコアは文字、空白、およびいくつかの句読点のみを含みます。WPM の計算に含むとみなす文字セットを変更したい場合は、`wpm_keycode_user(uint16_t keycode)` を実装し、計算に含めたい文字について true を返し、計算しない特定のキーコードに false を返すようにします。

docs/ja/newbs_git_best_practices.md

@@ -2,8 +2,8 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: adf4acf59:docs/newbs_git_best_practices.md
+  original document: 0.9.0:docs/newbs_git_best_practices.md
-  git diff adf4acf59 HEAD -- docs/newbs_git_best_practices.md | cat
+  git diff 0.9.0 HEAD -- docs/newbs_git_best_practices.md | cat
 -->
 
 ## または、"如何にして私は心配することをやめて Git を愛することを学んだか。"

docs/ja/newbs_git_resolving_merge_conflicts.md

@@ -2,8 +2,8 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: adf4acf59:docs/newbs_git_resolving_merge_conflicts.md
+  original document: 0.9.0:docs/newbs_git_resolving_merge_conflicts.md
-  git diff adf4acf59 HEAD -- docs/newbs_git_resolving_merge_conflicts.md | cat
+  git diff 0.9.0 HEAD -- docs/newbs_git_resolving_merge_conflicts.md | cat
 -->
 
 ブランチでの作業の完了に時間がかかる場合、他の人が行った変更が、プルリクエストを開いたときにブランチに加えた変更と競合することがあります。

docs/ja/newbs_git_resynchronize_a_branch.md

@@ -2,8 +2,8 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: adf4acf59:docs/newbs_git_resynchronize_a_branch.md
+  original document: 0.9.0:docs/newbs_git_resynchronize_a_branch.md
-  git diff adf4acf59 HEAD -- docs/newbs_git_resynchronize_a_branch.md | cat
+  git diff 0.9.0 HEAD -- docs/newbs_git_resynchronize_a_branch.md | cat
 -->
 
 仮にあなたの `master` ブランチにあなたのコミットを行い、そしてあなたの QMK リポジトリの更新が必要になったとします。

docs/ja/newbs_git_using_your_master_branch.md

@@ -2,8 +2,8 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: adf4acf59:docs/newbs_git_using_your_master_branch.md
+  original document: 0.9.0:docs/newbs_git_using_your_master_branch.md
-  git diff adf4acf59 HEAD -- docs/newbs_git_using_your_master_branch.md | cat
+  git diff 0.9.0 HEAD -- docs/newbs_git_using_your_master_branch.md | cat
 -->
 
 QMK の開発では、何がどこで行われているかにかかわらず、`master` ブランチを最新の状態に保つことを強くお勧めします、しかし `master` ブランチには***絶対に直接コミットしないでください***。

docs/ja/newbs_learn_more_resources.md

@@ -2,35 +2,44 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: ed0575fc8:docs/newbs_learn_more_resources.md
+  original document: 0.9.0:docs/newbs_learn_more_resources.md
-  git diff ed0575fc8 HEAD -- docs/newbs_learn_more_resources.md | cat
+  git diff 0.9.0 HEAD -- docs/newbs_learn_more_resources.md | cat
 -->
 
 これらのリソースは、QMK コミュニティの新しいメンバーに、初心者向けドキュメントで提供されている情報に対する理解を深めることを目的としています。
 
-## Git に関するリース:
+## QMK に関するリソース:
 
-### 英語
+### 英語 :id=english-resources-qmk
 
-* [Great General Tutorial](https://www.codecademy.com/learn/learn-git)
+* [Thomas Baart's QMK Basics Blog](https://thomasbaart.nl/category/mechanical-keyboards/firmware/qmk/qmk-basics/) – 新規ユーザーの視点から見た QMK ファームウェアの使い方の基本を網羅した、ユーザー作成のブログ。
-* [Git Game To Learn From Examples](https://learngitbranching.js.org/)
-* [Git Resources to Learn More About GitHub](getting_started_github.md)
-* [Git Resources Aimed Specifically toward QMK](contributing.md)
 
-### 日本語
+### 日本語 :id=japanese-resources-qmk
 
 _日本語のリソース情報を募集中です。_
 
-* [Git Game To Learn From Examples(日本語対応有り)](https://learngitbranching.js.org/)
-* [QMK で GitHub を使う方法](ja/getting_started_github.md)
-* [貢献方法](ja/contributing.md)
-
 ## コマンドラインに関するリソース:
 
-### 英語
+### 英語 :id=english-resources-cli
 
 * [Good General Tutorial on Command Line](https://www.codecademy.com/learn/learn-the-command-line)
 
-### 日本語
+### 日本語 :id=japanese-resources-cli
 
 _日本語のリソース情報を募集中です。_
+
+## Git に関するリソース:
+
+### 英語 :id=english-resources-git
+
+* [Great General Tutorial](https://www.codecademy.com/learn/learn-git)
+* [Flight Rules For Git](https://github.com/k88hudson/git-flight-rules)
+* [Git Game To Learn From Examples](https://learngitbranching.js.org/)
+
+### 日本語 :id=japanese-resources-git
+
+_日本語のリソース情報を募集中です。_
+
+* [Git Game To Learn From Examples(日本語対応有り)](https://learngitbranching.js.org/)  
+  git のブランチの作り方、マージの仕方などがビジュアルに学べます。
+* [QMK で GitHub を使う方法](ja/getting_started_github.md)

docs/ja/newbs_testing_debugging.md

@@ -2,27 +2,21 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: ed0575fc8:docs/newbs_testing_debugging.md
+  original document: 0.9.0:docs/newbs_testing_debugging.md
-  git diff ed0575fc8 HEAD -- docs/newbs_testing_debugging.md | cat
+  git diff 0.9.0 HEAD -- docs/newbs_testing_debugging.md | cat
 -->
 
 カスタムファームウェアをキーボードへ書き込んだら、テストする準備が整います。運が良ければ全て問題なく動作しているはずですが、もしそうでなければこのドキュメントがどこが悪いのか調べるのに役立ちます。
 
 ## テスト
 
-通常、キーボードをテストするのは非常に簡単です。全てのキーをひとつずつ押して、期待されるキーが送信されていることを確認します。キーを押したことを見逃さないためのプログラムもあります。
+通常、キーボードをテストするのは非常に簡単です。
+全てのキーをひとつずつ押して、期待されるキーが送信されていることを確認します。
+QMK を実行していなくても、[QMK Configurator](https://config.qmk.fm/#/test/) のテストモードを使ってキーボードを確認することができます。
 
-メモ：　これらのプログラムは QMK によって提供・承認されたものではありません。
+## デバッグ :id=debugging
 
-* [QMK Configurator](https://config.qmk.fm/#/test/) (Web Based)
+`rules.mk`へ`CONSOLE_ENABLE = yes`の設定をするとキーボードはデバッグ情報を出力します。デフォルトの出力は非常に限られたものですが、デバッグモードをオンにすることでデバッグ情報の量を増やすことが出来ます。キーマップの`DEBUG`キーコードを使用するか、デバッグモードを有効にする [コマンド](ja/feature_command.md) 機能を使用するか、以下のコードをキーマップに追加します。
-* [Switch Hitter](https://web.archive.org/web/20190413233743/https://elitekeyboards.com/switchhitter.php) (Windows Only)
-* [Keyboard Viewer](https://www.imore.com/how-use-keyboard-viewer-your-mac) (Mac Only)
-* [Keyboard Tester](http://www.keyboardtester.com) (Web Based)
-* [Keyboard Checker](http://keyboardchecker.com) (Web Based)
-
-## デバッグ
-
-`rules.mk`へ`CONSOLE_ENABLE = yes`の設定をするとキーボードはデバッグ情報を出力します。デフォルトの出力は非常に限られたものですが、デバッグモードをオンにすることでデバッグ情報の量を増やすことが出来ます。キーマップの`DEBUG`キーコードを使用するか、デバッグモードを有効にする [Command](ja/feature_command.md) 機能を使用するか、以下のコードをキーマップに追加します。
 
 ```c
 void keyboard_post_init_user(void) {
@@ -34,6 +28,10 @@ void keyboard_post_init_user(void) {
 }
 ```
 
+## デバッグツール :id=debugging-tools
+
+キーボードのデバッグに使えるツールは2つあります。
+
 ### QMK Toolboxを使ったデバッグ
 
 互換性のある環境では、[QMK Toolbox](https://github.com/qmk/qmk_toolbox)を使うことでキーボードからのデバッグメッセージを表示できます。
@@ -42,7 +40,6 @@ void keyboard_post_init_user(void) {
 
 ターミナルベースの方法がお好みですか？PJRC が提供する[hid_listen](https://www.pjrc.com/teensy/hid_listen.html)もデバッグメッセージの表示に使用できます。ビルド済みの実行ファイルは Windows, Linux, MacOS 用が用意されています。
 
-<!-- FIXME: Describe the debugging messages here. -->
 
 ## 独自のデバッグメッセージを送信する
 

docs/keycodes.md

@@ -8,205 +8,212 @@ This is a reference only. Each group of keys links to the page documenting their
 
 See also: [Basic Keycodes](keycodes_basic.md)
 
-|Key                    |Aliases                       |Description                                    |
+|Key                    |Aliases                       |Description                                    |Windows      |macOS        |Linux<sup>1</sup>|
-|-----------------------|------------------------------|-----------------------------------------------|
+|-----------------------|------------------------------|-----------------------------------------------|-------------|-------------|-----------------|
-|`KC_NO`                |`XXXXXXX`                     |Ignore this key (NOOP)                         |
+|`KC_NO`                |`XXXXXXX`                     |Ignore this key (NOOP)                         |*N/A*        |*N/A*        |*N/A*            |
-|`KC_TRANSPARENT`       |`KC_TRNS`, `_______`          |Use the next lowest non-transparent key        |
+|`KC_TRANSPARENT`       |`KC_TRNS`, `_______`          |Use the next lowest non-transparent key        |*N/A*        |*N/A*        |*N/A*            |
-|`KC_A`                 |                              |`a` and `A`                                    |
+|`KC_A`                 |                              |`a` and `A`                                    |✔            |✔            |✔                |
-|`KC_B`                 |                              |`b` and `B`                                    |
+|`KC_B`                 |                              |`b` and `B`                                    |✔            |✔            |✔                |
-|`KC_C`                 |                              |`c` and `C`                                    |
+|`KC_C`                 |                              |`c` and `C`                                    |✔            |✔            |✔                |
-|`KC_D`                 |                              |`d` and `D`                                    |
+|`KC_D`                 |                              |`d` and `D`                                    |✔            |✔            |✔                |
-|`KC_E`                 |                              |`e` and `E`                                    |
+|`KC_E`                 |                              |`e` and `E`                                    |✔            |✔            |✔                |
-|`KC_F`                 |                              |`f` and `F`                                    |
+|`KC_F`                 |                              |`f` and `F`                                    |✔            |✔            |✔                |
-|`KC_G`                 |                              |`g` and `G`                                    |
+|`KC_G`                 |                              |`g` and `G`                                    |✔            |✔            |✔                |
-|`KC_H`                 |                              |`h` and `H`                                    |
+|`KC_H`                 |                              |`h` and `H`                                    |✔            |✔            |✔                |
-|`KC_I`                 |                              |`i` and `I`                                    |
+|`KC_I`                 |                              |`i` and `I`                                    |✔            |✔            |✔                |
-|`KC_J`                 |                              |`j` and `J`                                    |
+|`KC_J`                 |                              |`j` and `J`                                    |✔            |✔            |✔                |
-|`KC_K`                 |                              |`k` and `K`                                    |
+|`KC_K`                 |                              |`k` and `K`                                    |✔            |✔            |✔                |
-|`KC_L`                 |                              |`l` and `L`                                    |
+|`KC_L`                 |                              |`l` and `L`                                    |✔            |✔            |✔                |
-|`KC_M`                 |                              |`m` and `M`                                    |
+|`KC_M`                 |                              |`m` and `M`                                    |✔            |✔            |✔                |
-|`KC_N`                 |                              |`n` and `N`                                    |
+|`KC_N`                 |                              |`n` and `N`                                    |✔            |✔            |✔                |
-|`KC_O`                 |                              |`o` and `O`                                    |
+|`KC_O`                 |                              |`o` and `O`                                    |✔            |✔            |✔                |
-|`KC_P`                 |                              |`p` and `P`                                    |
+|`KC_P`                 |                              |`p` and `P`                                    |✔            |✔            |✔                |
-|`KC_Q`                 |                              |`q` and `Q`                                    |
+|`KC_Q`                 |                              |`q` and `Q`                                    |✔            |✔            |✔                |
-|`KC_R`                 |                              |`r` and `R`                                    |
+|`KC_R`                 |                              |`r` and `R`                                    |✔            |✔            |✔                |
-|`KC_S`                 |                              |`s` and `S`                                    |
+|`KC_S`                 |                              |`s` and `S`                                    |✔            |✔            |✔                |
-|`KC_T`                 |                              |`t` and `T`                                    |
+|`KC_T`                 |                              |`t` and `T`                                    |✔            |✔            |✔                |
-|`KC_U`                 |                              |`u` and `U`                                    |
+|`KC_U`                 |                              |`u` and `U`                                    |✔            |✔            |✔                |
-|`KC_V`                 |                              |`v` and `V`                                    |
+|`KC_V`                 |                              |`v` and `V`                                    |✔            |✔            |✔                |
-|`KC_W`                 |                              |`w` and `W`                                    |
+|`KC_W`                 |                              |`w` and `W`                                    |✔            |✔            |✔                |
-|`KC_X`                 |                              |`x` and `X`                                    |
+|`KC_X`                 |                              |`x` and `X`                                    |✔            |✔            |✔                |
-|`KC_Y`                 |                              |`y` and `Y`                                    |
+|`KC_Y`                 |                              |`y` and `Y`                                    |✔            |✔            |✔                |
-|`KC_Z`                 |                              |`z` and `Z`                                    |
+|`KC_Z`                 |                              |`z` and `Z`                                    |✔            |✔            |✔                |
-|`KC_1`                 |                              |`1` and `!`                                    |
+|`KC_1`                 |                              |`1` and `!`                                    |✔            |✔            |✔                |
-|`KC_2`                 |                              |`2` and `@`                                    |
+|`KC_2`                 |                              |`2` and `@`                                    |✔            |✔            |✔                |
-|`KC_3`                 |                              |`3` and `#`                                    |
+|`KC_3`                 |                              |`3` and `#`                                    |✔            |✔            |✔                |
-|`KC_4`                 |                              |`4` and `$`                                    |
+|`KC_4`                 |                              |`4` and `$`                                    |✔            |✔            |✔                |
-|`KC_5`                 |                              |`5` and `%`                                    |
+|`KC_5`                 |                              |`5` and `%`                                    |✔            |✔            |✔                |
-|`KC_6`                 |                              |`6` and `^`                                    |
+|`KC_6`                 |                              |`6` and `^`                                    |✔            |✔            |✔                |
-|`KC_7`                 |                              |`7` and `&`                                    |
+|`KC_7`                 |                              |`7` and `&`                                    |✔            |✔            |✔                |
-|`KC_8`                 |                              |`8` and `*`                                    |
+|`KC_8`                 |                              |`8` and `*`                                    |✔            |✔            |✔                |
-|`KC_9`                 |                              |`9` and `(`                                    |
+|`KC_9`                 |                              |`9` and `(`                                    |✔            |✔            |✔                |
-|`KC_0`                 |                              |`0` and `)`                                    |
+|`KC_0`                 |                              |`0` and `)`                                    |✔            |✔            |✔                |
-|`KC_ENTER`             |`KC_ENT`                      |Return (Enter)                                 |
+|`KC_ENTER`             |`KC_ENT`                      |Return (Enter)                                 |✔            |✔            |✔                |
-|`KC_ESCAPE`            |`KC_ESC`                      |Escape                                         |
+|`KC_ESCAPE`            |`KC_ESC`                      |Escape                                         |✔            |✔            |✔                |
-|`KC_BSPACE`            |`KC_BSPC`                     |Delete (Backspace)                             |
+|`KC_BSPACE`            |`KC_BSPC`                     |Delete (Backspace)                             |✔            |✔            |✔                |
-|`KC_TAB`               |                              |Tab                                            |
+|`KC_TAB`               |                              |Tab                                            |✔            |✔            |✔                |
-|`KC_SPACE`             |`KC_SPC`                      |Spacebar                                       |
+|`KC_SPACE`             |`KC_SPC`                      |Spacebar                                       |✔            |✔            |✔                |
-|`KC_MINUS`             |`KC_MINS`                     |`-` and `_`                                    |
+|`KC_MINUS`             |`KC_MINS`                     |`-` and `_`                                    |✔            |✔            |✔                |
-|`KC_EQUAL`             |`KC_EQL`                      |`=` and `+`                                    |
+|`KC_EQUAL`             |`KC_EQL`                      |`=` and `+`                                    |✔            |✔            |✔                |
-|`KC_LBRACKET`          |`KC_LBRC`                     |`[` and `{`                                    |
+|`KC_LBRACKET`          |`KC_LBRC`                     |`[` and `{`                                    |✔            |✔            |✔                |
-|`KC_RBRACKET`          |`KC_RBRC`                     |`]` and `}`                                    |
+|`KC_RBRACKET`          |`KC_RBRC`                     |`]` and `}`                                    |✔            |✔            |✔                |
-|`KC_BSLASH`            |`KC_BSLS`                     |`\` and `\|`                                   |
+|`KC_BSLASH`            |`KC_BSLS`                     |`\` and `\|`                                   |✔            |✔            |✔                |
-|`KC_NONUS_HASH`        |`KC_NUHS`                     |Non-US `#` and `~`                             |
+|`KC_NONUS_HASH`        |`KC_NUHS`                     |Non-US `#` and `~`                             |✔            |✔            |✔                |
-|`KC_SCOLON`            |`KC_SCLN`                     |`;` and `:`                                    |
+|`KC_SCOLON`            |`KC_SCLN`                     |`;` and `:`                                    |✔            |✔            |✔                |
-|`KC_QUOTE`             |`KC_QUOT`                     |`'` and `"`                                    |
+|`KC_QUOTE`             |`KC_QUOT`                     |`'` and `"`                                    |✔            |✔            |✔                |
-|`KC_GRAVE`             |`KC_GRV`, `KC_ZKHK`           |<code>&#96;</code> and `~`, JIS Zenkaku/Hankaku|
+|`KC_GRAVE`             |`KC_GRV`, `KC_ZKHK`           |<code>&#96;</code> and `~`, JIS Zenkaku/Hankaku|✔            |✔            |✔                |
-|`KC_COMMA`             |`KC_COMM`                     |`,` and `<`                                    |
+|`KC_COMMA`             |`KC_COMM`                     |`,` and `<`                                    |✔            |✔            |✔                |
-|`KC_DOT`               |                              |`.` and `>`                                    |
+|`KC_DOT`               |                              |`.` and `>`                                    |✔            |✔            |✔                |
-|`KC_SLASH`             |`KC_SLSH`                     |`/` and `?`                                    |
+|`KC_SLASH`             |`KC_SLSH`                     |`/` and `?`                                    |✔            |✔            |✔                |
-|`KC_CAPSLOCK`          |`KC_CLCK`, `KC_CAPS`          |Caps Lock                                      |
+|`KC_CAPSLOCK`          |`KC_CLCK`, `KC_CAPS`          |Caps Lock                                      |✔            |✔            |✔                |
-|`KC_F1`                |                              |F1                                             |
+|`KC_F1`                |                              |F1                                             |✔            |✔            |✔                |
-|`KC_F2`                |                              |F2                                             |
+|`KC_F2`                |                              |F2                                             |✔            |✔            |✔                |
-|`KC_F3`                |                              |F3                                             |
+|`KC_F3`                |                              |F3                                             |✔            |✔            |✔                |
-|`KC_F4`                |                              |F4                                             |
+|`KC_F4`                |                              |F4                                             |✔            |✔            |✔                |
-|`KC_F5`                |                              |F5                                             |
+|`KC_F5`                |                              |F5                                             |✔            |✔            |✔                |
-|`KC_F6`                |                              |F6                                             |
+|`KC_F6`                |                              |F6                                             |✔            |✔            |✔                |
-|`KC_F7`                |                              |F7                                             |
+|`KC_F7`                |                              |F7                                             |✔            |✔            |✔                |
-|`KC_F8`                |                              |F8                                             |
+|`KC_F8`                |                              |F8                                             |✔            |✔            |✔                |
-|`KC_F9`                |                              |F9                                             |
+|`KC_F9`                |                              |F9                                             |✔            |✔            |✔                |
-|`KC_F10`               |                              |F10                                            |
+|`KC_F10`               |                              |F10                                            |✔            |✔            |✔                |
-|`KC_F11`               |                              |F11                                            |
+|`KC_F11`               |                              |F11                                            |✔            |✔            |✔                |
-|`KC_F12`               |                              |F12                                            |
+|`KC_F12`               |                              |F12                                            |✔            |✔            |✔                |
-|`KC_PSCREEN`           |`KC_PSCR`                     |Print Screen                                   |
+|`KC_PSCREEN`           |`KC_PSCR`                     |Print Screen                                   |✔            |✔<sup>2</sup>|✔                |
-|`KC_SCROLLLOCK`        |`KC_SLCK`, `KC_BRMD`          |Scroll Lock, Brightness Down (macOS)           |
+|`KC_SCROLLLOCK`        |`KC_SLCK`, `KC_BRMD`          |Scroll Lock, Brightness Down (macOS)           |✔            |✔<sup>2</sup>|✔                |
-|`KC_PAUSE`             |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)                   |
+|`KC_PAUSE`             |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)                   |✔            |✔<sup>2</sup>|✔                |
-|`KC_INSERT`            |`KC_INS`                      |Insert                                         |
+|`KC_INSERT`            |`KC_INS`                      |Insert                                         |✔            |             |✔                |
-|`KC_HOME`              |                              |Home                                           |
+|`KC_HOME`              |                              |Home                                           |✔            |✔            |✔                |
-|`KC_PGUP`              |                              |Page Up                                        |
+|`KC_PGUP`              |                              |Page Up                                        |✔            |✔            |✔                |
-|`KC_DELETE`            |`KC_DEL`                      |Forward Delete                                 |
+|`KC_DELETE`            |`KC_DEL`                      |Forward Delete                                 |✔            |✔            |✔                |
-|`KC_END`               |                              |End                                            |
+|`KC_END`               |                              |End                                            |✔            |✔            |✔                |
-|`KC_PGDOWN`            |`KC_PGDN`                     |Page Down                                      |
+|`KC_PGDOWN`            |`KC_PGDN`                     |Page Down                                      |✔            |✔            |✔                |
-|`KC_RIGHT`             |`KC_RGHT`                     |Right Arrow                                    |
+|`KC_RIGHT`             |`KC_RGHT`                     |Right Arrow                                    |✔            |✔            |✔                |
-|`KC_LEFT`              |                              |Left Arrow                                     |
+|`KC_LEFT`              |                              |Left Arrow                                     |✔            |✔            |✔                |
-|`KC_DOWN`              |                              |Down Arrow                                     |
+|`KC_DOWN`              |                              |Down Arrow                                     |✔            |✔            |✔                |
-|`KC_UP`                |                              |Up Arrow                                       |
+|`KC_UP`                |                              |Up Arrow                                       |✔            |✔            |✔                |
-|`KC_NUMLOCK`           |`KC_NLCK`                     |Keypad Num Lock and Clear                      |
+|`KC_NUMLOCK`           |`KC_NLCK`                     |Keypad Num Lock and Clear                      |✔            |✔            |✔                |
-|`KC_KP_SLASH`          |`KC_PSLS`                     |Keypad `/`                                     |
+|`KC_KP_SLASH`          |`KC_PSLS`                     |Keypad `/`                                     |✔            |✔            |✔                |
-|`KC_KP_ASTERISK`       |`KC_PAST`                     |Keypad `*`                                     |
+|`KC_KP_ASTERISK`       |`KC_PAST`                     |Keypad `*`                                     |✔            |✔            |✔                |
-|`KC_KP_MINUS`          |`KC_PMNS`                     |Keypad `-`                                     |
+|`KC_KP_MINUS`          |`KC_PMNS`                     |Keypad `-`                                     |✔            |✔            |✔                |
-|`KC_KP_PLUS`           |`KC_PPLS`                     |Keypad `+`                                     |
+|`KC_KP_PLUS`           |`KC_PPLS`                     |Keypad `+`                                     |✔            |✔            |✔                |
-|`KC_KP_ENTER`          |`KC_PENT`                     |Keypad Enter                                   |
+|`KC_KP_ENTER`          |`KC_PENT`                     |Keypad Enter                                   |✔            |✔            |✔                |
-|`KC_KP_1`              |`KC_P1`                       |Keypad `1` and End                             |
+|`KC_KP_1`              |`KC_P1`                       |Keypad `1` and End                             |✔            |✔            |✔                |
-|`KC_KP_2`              |`KC_P2`                       |Keypad `2` and Down Arrow                      |
+|`KC_KP_2`              |`KC_P2`                       |Keypad `2` and Down Arrow                      |✔            |✔            |✔                |
-|`KC_KP_3`              |`KC_P3`                       |Keypad `3` and Page Down                       |
+|`KC_KP_3`              |`KC_P3`                       |Keypad `3` and Page Down                       |✔            |✔            |✔                |
-|`KC_KP_4`              |`KC_P4`                       |Keypad `4` and Left Arrow                      |
+|`KC_KP_4`              |`KC_P4`                       |Keypad `4` and Left Arrow                      |✔            |✔            |✔                |
-|`KC_KP_5`              |`KC_P5`                       |Keypad `5`                                     |
+|`KC_KP_5`              |`KC_P5`                       |Keypad `5`                                     |✔            |✔            |✔                |
-|`KC_KP_6`              |`KC_P6`                       |Keypad `6` and Right Arrow                     |
+|`KC_KP_6`              |`KC_P6`                       |Keypad `6` and Right Arrow                     |✔            |✔            |✔                |
-|`KC_KP_7`              |`KC_P7`                       |Keypad `7` and Home                            |
+|`KC_KP_7`              |`KC_P7`                       |Keypad `7` and Home                            |✔            |✔            |✔                |
-|`KC_KP_8`              |`KC_P8`                       |Keypad `8` and Up Arrow                        |
+|`KC_KP_8`              |`KC_P8`                       |Keypad `8` and Up Arrow                        |✔            |✔            |✔                |
-|`KC_KP_9`              |`KC_P9`                       |Keypad `9` and Page Up                         |
+|`KC_KP_9`              |`KC_P9`                       |Keypad `9` and Page Up                         |✔            |✔            |✔                |
-|`KC_KP_0`              |`KC_P0`                       |Keypad `0` and Insert                          |
+|`KC_KP_0`              |`KC_P0`                       |Keypad `0` and Insert                          |✔            |✔            |✔                |
-|`KC_KP_DOT`            |`KC_PDOT`                     |Keypad `.` and Delete                          |
+|`KC_KP_DOT`            |`KC_PDOT`                     |Keypad `.` and Delete                          |✔            |✔            |✔                |
-|`KC_NONUS_BSLASH`      |`KC_NUBS`                     |Non-US `\` and `\|`                            |
+|`KC_NONUS_BSLASH`      |`KC_NUBS`                     |Non-US `\` and `\|`                            |✔            |✔            |✔                |
-|`KC_APPLICATION`       |`KC_APP`                      |Application (Windows Menu Key)                 |
+|`KC_APPLICATION`       |`KC_APP`                      |Application (Windows Context Menu Key)         |✔            |             |✔                |
-|`KC_POWER`             |                              |System Power (macOS)                           |
+|`KC_POWER`             |                              |System Power                                   |             |✔<sup>3</sup>|✔                |
-|`KC_KP_EQUAL`          |`KC_PEQL`                     |Keypad `=`                                     |
+|`KC_KP_EQUAL`          |`KC_PEQL`                     |Keypad `=`                                     |✔            |✔            |✔                |
-|`KC_F13`               |                              |F13                                            |
+|`KC_F13`               |                              |F13                                            |✔            |✔            |✔                |
-|`KC_F14`               |                              |F14                                            |
+|`KC_F14`               |                              |F14                                            |✔            |✔            |✔                |
-|`KC_F15`               |                              |F15                                            |
+|`KC_F15`               |                              |F15                                            |✔            |✔            |✔                |
-|`KC_F16`               |                              |F16                                            |
+|`KC_F16`               |                              |F16                                            |✔            |✔            |✔                |
-|`KC_F17`               |                              |F17                                            |
+|`KC_F17`               |                              |F17                                            |✔            |✔            |✔                |
-|`KC_F18`               |                              |F18                                            |
+|`KC_F18`               |                              |F18                                            |✔            |✔            |✔                |
-|`KC_F19`               |                              |F19                                            |
+|`KC_F19`               |                              |F19                                            |✔            |✔            |✔                |
-|`KC_F20`               |                              |F20                                            |
+|`KC_F20`               |                              |F20                                            |✔            |             |✔                |
-|`KC_F21`               |                              |F21                                            |
+|`KC_F21`               |                              |F21                                            |✔            |             |✔                |
-|`KC_F22`               |                              |F22                                            |
+|`KC_F22`               |                              |F22                                            |✔            |             |✔                |
-|`KC_F23`               |                              |F23                                            |
+|`KC_F23`               |                              |F23                                            |✔            |             |✔                |
-|`KC_F24`               |                              |F24                                            |
+|`KC_F24`               |                              |F24                                            |✔            |             |✔                |
-|`KC_EXECUTE`           |`KC_EXEC`                     |Execute                                        |
+|`KC_EXECUTE`           |`KC_EXEC`                     |Execute                                        |            |             |✔                |
-|`KC_HELP`              |                              |Help                                           |
+|`KC_HELP`              |                              |Help                                           |            |             |✔                |
-|`KC_MENU`              |                              |Menu                                           |
+|`KC_MENU`              |                              |Menu                                           |            |             |✔                |
-|`KC_SELECT`            |`KC_SLCT`                     |Select                                         |
+|`KC_SELECT`            |`KC_SLCT`                     |Select                                         |            |             |✔                |
-|`KC_STOP`              |                              |Stop                                           |
+|`KC_STOP`              |                              |Stop                                           |            |             |✔                |
-|`KC_AGAIN`             |`KC_AGIN`                     |Again                                          |
+|`KC_AGAIN`             |`KC_AGIN`                     |Again                                          |            |             |✔                |
-|`KC_UNDO`              |                              |Undo                                           |
+|`KC_UNDO`              |                              |Undo                                           |            |             |✔                |
-|`KC_CUT`               |                              |Cut                                            |
+|`KC_CUT`               |                              |Cut                                            |            |             |✔                |
-|`KC_COPY`              |                              |Copy                                           |
+|`KC_COPY`              |                              |Copy                                           |            |             |✔                |
-|`KC_PASTE`             |`KC_PSTE`                     |Paste                                          |
+|`KC_PASTE`             |`KC_PSTE`                     |Paste                                          |            |             |✔                |
-|`KC_FIND`              |                              |Find                                           |
+|`KC_FIND`              |                              |Find                                           |            |             |✔                |
-|`KC__MUTE`             |                              |Mute (macOS)                                   |
+|`KC__MUTE`             |                              |Mute                                           |             |✔            |✔                |
-|`KC__VOLUP`            |                              |Volume Up (macOS)                              |
+|`KC__VOLUP`            |                              |Volume Up                                      |             |✔            |✔                |
-|`KC__VOLDOWN`          |                              |Volume Down (macOS)                            |
+|`KC__VOLDOWN`          |                              |Volume Down                                    |             |✔            |✔                |
-|`KC_LOCKING_CAPS`      |`KC_LCAP`                     |Locking Caps Lock                              |
+|`KC_LOCKING_CAPS`      |`KC_LCAP`                     |Locking Caps Lock                              |✔            |✔            |                 |
-|`KC_LOCKING_NUM`       |`KC_LNUM`                     |Locking Num Lock                               |
+|`KC_LOCKING_NUM`       |`KC_LNUM`                     |Locking Num Lock                               |✔            |✔            |                 |
-|`KC_LOCKING_SCROLL`    |`KC_LSCR`                     |Locking Scroll Lock                            |
+|`KC_LOCKING_SCROLL`    |`KC_LSCR`                     |Locking Scroll Lock                            |✔            |✔            |                 |
-|`KC_KP_COMMA`          |`KC_PCMM`                     |Keypad `,`                                     |
+|`KC_KP_COMMA`          |`KC_PCMM`                     |Keypad `,`                                     |             |             |✔                |
-|`KC_KP_EQUAL_AS400`    |                              |Keypad `=` on AS/400 keyboards                 |
+|`KC_KP_EQUAL_AS400`    |                              |Keypad `=` on AS/400 keyboards                 |             |             |                 |
-|`KC_INT1`              |`KC_RO`                       |JIS `\` and `_`                                |
+|`KC_INT1`              |`KC_RO`                       |JIS `\` and `_`                                |✔            |             |✔                |
-|`KC_INT2`              |`KC_KANA`                     |JIS Katakana/Hiragana                          |
+|`KC_INT2`              |`KC_KANA`                     |JIS Katakana/Hiragana                          |✔            |             |✔                |
-|`KC_INT3`              |`KC_JYEN`                     |JIS `¥` and `\|`                               |
+|`KC_INT3`              |`KC_JYEN`                     |JIS `¥` and `\|`                               |✔            |             |✔                |
-|`KC_INT4`              |`KC_HENK`                     |JIS Henkan                                     |
+|`KC_INT4`              |`KC_HENK`                     |JIS Henkan                                     |✔            |             |✔                |
-|`KC_INT5`              |`KC_MHEN`                     |JIS Muhenkan                                   |
+|`KC_INT5`              |`KC_MHEN`                     |JIS Muhenkan                                   |✔            |             |✔                |
-|`KC_INT6`              |                              |JIS Numpad `,`                                 |
+|`KC_INT6`              |                              |JIS Numpad `,`                                 |             |             |✔                |
-|`KC_INT7`              |                              |International 7                                |
+|`KC_INT7`              |                              |International 7                                |             |             |                 |
-|`KC_INT8`              |                              |International 8                                |
+|`KC_INT8`              |                              |International 8                                |             |             |                 |
-|`KC_INT9`              |                              |International 9                                |
+|`KC_INT9`              |                              |International 9                                |             |             |                 |
-|`KC_LANG1`             |`KC_HAEN`                     |Hangul/English                                 |
+|`KC_LANG1`             |`KC_HAEN`                     |Hangul/English                                 |             |             |✔                |
-|`KC_LANG2`             |`KC_HANJ`                     |Hanja                                          |
+|`KC_LANG2`             |`KC_HANJ`                     |Hanja                                          |             |             |✔                |
-|`KC_LANG3`             |                              |JIS Katakana                                   |
+|`KC_LANG3`             |                              |JIS Katakana                                   |             |             |✔                |
-|`KC_LANG4`             |                              |JIS Hiragana                                   |
+|`KC_LANG4`             |                              |JIS Hiragana                                   |             |             |✔                |
-|`KC_LANG5`             |                              |JIS Zenkaku/Hankaku                            |
+|`KC_LANG5`             |                              |JIS Zenkaku/Hankaku                            |             |             |✔                |
-|`KC_LANG6`             |                              |Language 6                                     |
+|`KC_LANG6`             |                              |Language 6                                     |             |             |                 |
-|`KC_LANG7`             |                              |Language 7                                     |
+|`KC_LANG7`             |                              |Language 7                                     |             |             |                 |
-|`KC_LANG8`             |                              |Language 8                                     |
+|`KC_LANG8`             |                              |Language 8                                     |             |             |                 |
-|`KC_LANG9`             |                              |Language 9                                     |
+|`KC_LANG9`             |                              |Language 9                                     |             |             |                 |
-|`KC_ALT_ERASE`         |`KC_ERAS`                     |Alternate Erase                                |
+|`KC_ALT_ERASE`         |`KC_ERAS`                     |Alternate Erase                                |             |             |                 |
-|`KC_SYSREQ`            |                              |SysReq/Attention                               |
+|`KC_SYSREQ`            |                              |SysReq/Attention                               |             |             |                 |
-|`KC_CANCEL`            |                              |Cancel                                         |
+|`KC_CANCEL`            |                              |Cancel                                         |             |             |                 |
-|`KC_CLEAR`             |`KC_CLR`                      |Clear                                          |
+|`KC_CLEAR`             |`KC_CLR`                      |Clear                                          |             |             |✔                |
-|`KC_PRIOR`             |                              |Prior                                          |
+|`KC_PRIOR`             |                              |Prior                                          |             |             |                 |
-|`KC_RETURN`            |                              |Return                                         |
+|`KC_RETURN`            |                              |Return                                         |             |             |                 |
-|`KC_SEPARATOR`         |                              |Separator                                      |
+|`KC_SEPARATOR`         |                              |Separator                                      |             |             |                 |
-|`KC_OUT`               |                              |Out                                            |
+|`KC_OUT`               |                              |Out                                            |             |             |                 |
-|`KC_OPER`              |                              |Oper                                           |
+|`KC_OPER`              |                              |Oper                                           |             |             |                 |
-|`KC_CLEAR_AGAIN`       |                              |Clear/Again                                    |
+|`KC_CLEAR_AGAIN`       |                              |Clear/Again                                    |             |             |                 |
-|`KC_CRSEL`             |                              |CrSel/Props                                    |
+|`KC_CRSEL`             |                              |CrSel/Props                                    |             |             |                 |
-|`KC_EXSEL`             |                              |ExSel                                          |
+|`KC_EXSEL`             |                              |ExSel                                          |             |             |                 |
-|`KC_LCTRL`             |`KC_LCTL`                     |Left Control                                   |
+|`KC_LCTRL`             |`KC_LCTL`                     |Left Control                                   |✔            |✔            |✔                |
-|`KC_LSHIFT`            |`KC_LSFT`                     |Left Shift                                     |
+|`KC_LSHIFT`            |`KC_LSFT`                     |Left Shift                                     |✔            |✔            |✔                |
-|`KC_LALT`              |`KC_LOPT`                     |Left Alt (Option)                              |
+|`KC_LALT`              |`KC_LOPT`                     |Left Alt (Option)                              |✔            |✔            |✔                |
-|`KC_LGUI`              |`KC_LCMD`, `KC_LWIN`          |Left GUI (Windows/Command/Meta key)            |
+|`KC_LGUI`              |`KC_LCMD`, `KC_LWIN`          |Left GUI (Windows/Command/Meta key)            |✔            |✔            |✔                |
-|`KC_RCTRL`             |`KC_RCTL`                     |Right Control                                  |
+|`KC_RCTRL`             |`KC_RCTL`                     |Right Control                                  |✔            |✔            |✔                |
-|`KC_RSHIFT`            |`KC_RSFT`                     |Right Shift                                    |
+|`KC_RSHIFT`            |`KC_RSFT`                     |Right Shift                                    |✔            |✔            |✔                |
-|`KC_RALT`              |`KC_ROPT`, `KC_ALGR`          |Right Alt (Option/AltGr)                       |
+|`KC_RALT`              |`KC_ROPT`, `KC_ALGR`          |Right Alt (Option/AltGr)                       |✔            |✔            |✔                |
-|`KC_RGUI`              |`KC_RCMD`, `KC_RWIN`          |Right GUI (Windows/Command/Meta key)           |
+|`KC_RGUI`              |`KC_RCMD`, `KC_RWIN`          |Right GUI (Windows/Command/Meta key)           |✔            |✔            |✔                |
-|`KC_SYSTEM_POWER`      |`KC_PWR`                      |System Power Down                              |
+|`KC_SYSTEM_POWER`      |`KC_PWR`                      |System Power Down                              |✔            |✔<sup>3</sup>|✔                |
-|`KC_SYSTEM_SLEEP`      |`KC_SLEP`                     |System Sleep                                   |
+|`KC_SYSTEM_SLEEP`      |`KC_SLEP`                     |System Sleep                                   |✔            |✔<sup>3</sup>|✔                |
-|`KC_SYSTEM_WAKE`       |`KC_WAKE`                     |System Wake                                    |
+|`KC_SYSTEM_WAKE`       |`KC_WAKE`                     |System Wake                                    |             |✔<sup>3</sup>|✔                |
-|`KC_AUDIO_MUTE`        |`KC_MUTE`                     |Mute                                           |
+|`KC_AUDIO_MUTE`        |`KC_MUTE`                     |Mute                                           |✔            |✔            |✔                |
-|`KC_AUDIO_VOL_UP`      |`KC_VOLU`                     |Volume Up                                      |
+|`KC_AUDIO_VOL_UP`      |`KC_VOLU`                     |Volume Up                                      |✔            |✔<sup>4</sup>|✔                |
-|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`                     |Volume Down                                    |
+|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`                     |Volume Down                                    |✔            |✔<sup>4</sup>|✔                |
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`                     |Next Track                                     |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`                     |Next Track                                     |✔            |✔<sup>5</sup>|✔                |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`                     |Previous Track                                 |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`                     |Previous Track                                 |✔            |✔<sup>5</sup>|✔                |
-|`KC_MEDIA_STOP`        |`KC_MSTP`                     |Stop Track (Windows)                           |
+|`KC_MEDIA_STOP`        |`KC_MSTP`                     |Stop Track                                     |✔            |             |✔                |
-|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`                     |Play/Pause Track                               |
+|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`                     |Play/Pause Track                               |✔            |✔            |✔                |
-|`KC_MEDIA_SELECT`      |`KC_MSEL`                     |Launch Media Player (Windows)                  |
+|`KC_MEDIA_SELECT`      |`KC_MSEL`                     |Launch Media Player                            |✔            |             |✔                |
-|`KC_MEDIA_EJECT`       |`KC_EJCT`                     |Eject (macOS)                                  |
+|`KC_MEDIA_EJECT`       |`KC_EJCT`                     |Eject                                          |             |✔            |✔                |
-|`KC_MAIL`              |                              |Launch Mail (Windows)                          |
+|`KC_MAIL`              |                              |Launch Mail                                    |✔            |             |✔                |
-|`KC_CALCULATOR`        |`KC_CALC`                     |Launch Calculator (Windows)                    |
+|`KC_CALCULATOR`        |`KC_CALC`                     |Launch Calculator                              |✔            |             |✔                |
-|`KC_MY_COMPUTER`       |`KC_MYCM`                     |Launch My Computer (Windows)                   |
+|`KC_MY_COMPUTER`       |`KC_MYCM`                     |Launch My Computer                             |✔            |             |✔                |
-|`KC_WWW_SEARCH`        |`KC_WSCH`                     |Browser Search (Windows)                       |
+|`KC_WWW_SEARCH`        |`KC_WSCH`                     |Browser Search                                 |✔            |             |✔                |
-|`KC_WWW_HOME`          |`KC_WHOM`                     |Browser Home (Windows)                         |
+|`KC_WWW_HOME`          |`KC_WHOM`                     |Browser Home                                   |✔            |             |✔                |
-|`KC_WWW_BACK`          |`KC_WBAK`                     |Browser Back (Windows)                         |
+|`KC_WWW_BACK`          |`KC_WBAK`                     |Browser Back                                   |✔            |             |✔                |
-|`KC_WWW_FORWARD`       |`KC_WFWD`                     |Browser Forward (Windows)                      |
+|`KC_WWW_FORWARD`       |`KC_WFWD`                     |Browser Forward                                |✔            |             |✔                |
-|`KC_WWW_STOP`          |`KC_WSTP`                     |Browser Stop (Windows)                         |
+|`KC_WWW_STOP`          |`KC_WSTP`                     |Browser Stop                                   |✔            |             |✔                |
-|`KC_WWW_REFRESH`       |`KC_WREF`                     |Browser Refresh (Windows)                      |
+|`KC_WWW_REFRESH`       |`KC_WREF`                     |Browser Refresh                                |✔            |             |✔                |
-|`KC_WWW_FAVORITES`     |`KC_WFAV`                     |Browser Favorites (Windows)                    |
+|`KC_WWW_FAVORITES`     |`KC_WFAV`                     |Browser Favorites                              |✔            |             |✔                |
-|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`                     |Next Track (macOS)                             |
+|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`                     |Next Track                                     |✔            |✔<sup>5</sup>|✔                |
-|`KC_MEDIA_REWIND`      |`KC_MRWD`                     |Previous Track (macOS)                         |
+|`KC_MEDIA_REWIND`      |`KC_MRWD`                     |Previous Track                                 |✔<sup>6</sup>|✔<sup>5</sup>|✔                |
-|`KC_BRIGHTNESS_UP`     |`KC_BRIU`                     |Brightness Up                                  |
+|`KC_BRIGHTNESS_UP`     |`KC_BRIU`                     |Brightness Up                                  |✔            |✔            |✔                |
-|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`                     |Brightness Down                                |
+|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`                     |Brightness Down                                |✔            |✔            |✔                |
+
+<sup>1. The Linux kernel HID driver recognizes [nearly all keycodes](https://github.com/torvalds/linux/blob/master/drivers/hid/hid-input.c), but the default bindings depend on the DE/WM.</sup><br/>
+<sup>2. Treated as F13-F15.</sup><br/>
+<sup>3. Must be held for about three seconds, and will display a prompt instead.</sup><br/>
+<sup>4. Holding Shift+Option allows for finer control of volume level.</sup><br/>
+<sup>5. Skips the entire track in iTunes when tapped, seeks within the current track when held.</sup><br/>
+<sup>6. WMP does not recognize the Rewind key, but both alter playback speed in VLC.</sup>
 
 ## Quantum Keycodes :id=quantum-keycodes
 

docs/spi_driver.md

@@ -11,7 +11,7 @@ No special setup is required - just connect the `SS`, `SCK`, `MOSI` and `MISO` p
 |ATMega16/32U2/4|`B0`|`B1` |`B2`  |`B3`  |
 |AT90USB64/128  |`B0`|`B1` |`B2`  |`B3`  |
 |ATmega32A      |`B4`|`B7` |`B5`  |`B6`  |
-|ATmega328P     |`B2`|`B5` |`B3`  |`B4`  |
+|ATmega328/P    |`B2`|`B5` |`B3`  |`B4`  |
 
 You may use more than one slave select pin, not just the `SS` pin. This is useful when you have multiple devices connected and need to communicate with them individually.
 `SPI_SS_PIN` can be passed to `spi_start()` to refer to `SS`.

drivers/avr/analog.c

@@ -38,7 +38,7 @@ int16_t analogRead(uint8_t pin) {
     // clang-format on
     if (pin >= 12) return 0;
     return adc_read(pgm_read_byte(pin_to_mux + pin));
-#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega328P__)
+#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
     if (pin >= 8) return 0;
     return adc_read(pin);
 #else
@@ -85,7 +85,7 @@ uint8_t pinToMux(pin_t pin) {
         case A6: return _BV(MUX2) | _BV(MUX1);  // ADC6
         case A7: return _BV(MUX2) | _BV(MUX1) | _BV(MUX0);  // ADC7
         default: return _BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0);  // 0V
-#elif defined(__AVR_ATmega328P__)
+#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
         case C0: return 0;  // ADC0
         case C1: return _BV(MUX0);  // ADC1
         case C2: return _BV(MUX1);  // ADC2

drivers/avr/spi_master.c

@@ -28,7 +28,7 @@
 #    define SPI_SCK_PIN B7
 #    define SPI_MOSI_PIN B5
 #    define SPI_MISO_PIN B6
-#elif defined(__AVR_ATmega328P__)
+#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
 #    define SPI_SCK_PIN B5
 #    define SPI_MOSI_PIN B3
 #    define SPI_MISO_PIN B4

drivers/avr/spi_master.h

@@ -25,7 +25,7 @@ typedef int16_t spi_status_t;
 #    define SPI_SS_PIN B0
 #elif defined(__AVR_ATmega32A__)
 #    define SPI_SS_PIN B4
-#elif defined(__AVR_ATmega328P__)
+#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
 #    define SPI_SS_PIN B2
 #endif
 

keyboards/anavi/macropad8/config.h

@@ -0,0 +1,72 @@
+/*
+Copyright 2020 Leon Anavi <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCEEB
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    ANAVI
+#define PRODUCT         Macro Pad 8
+#define DESCRIPTION     8-key mechanical keyboard/keypad/macropad with backlit, mini OLED display and RGB LED strip
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *                  NO_DIODE = switches are directly connected to AVR pins
+ *
+*/
+#define DIRECT_PINS {   \
+    { D4, F6, B5, E6 }, \
+    { F5, F7, B4, C6 } \
+}
+
+#define BACKLIGHT_PIN D7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+#define RGBLIGHT_SLEEP
+
+#define UNUSED_PINS
+
+/* ws2812B RGB LED */
+#ifdef RGBLIGHT_ENABLE
+#   define RGB_DI_PIN F4
+#   define RGBLIGHT_ANIMATIONS
+#   define RGBLED_NUM 4
+#   define RGBLIGHT_HUE_STEP 10
+#   define RGBLIGHT_SAT_STEP 17
+#   define RGBLIGHT_VAL_STEP 17
+#   define RGBLIGHT_LIMIT_VAL 255
+#endif
+
+#ifdef OLED_DRIVER_ENABLE
+#   define OLED_DISPLAY_128X64
+#   define OLED_TIMEOUT 60000
+#   define OLED_FONT_H "keyboards/anavi/macropad8/glcdfont.c"
+#endif

keyboards/anavi/macropad8/glcdfont.c

@@ -0,0 +1,232 @@
+#include "progmem.h"
+
+// Corne 8x6 font with QMK Firmware Logo
+// Online editor: https://helixfonteditor.netlify.com/
+
+// clang-format off
+const unsigned char font[] PROGMEM = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0xC0, 0xE0,
+0xF0, 0xF8, 0xF8, 0x18, 0x00, 0xC0,
+0xF0, 0xFC, 0xFE, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0x7E, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x80, 0xC0, 0xE0, 0xE0,
+0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
+0xC0, 0x80, 0x00, 0x00, 0x00, 0x00,
+0x80, 0xC0, 0xE0, 0xE0, 0xE0, 0xE0,
+0xE0, 0xE0, 0xE0, 0xE0, 0xC0, 0x80,
+0x00, 0x00, 0x00, 0xE0, 0xE0, 0xC0,
+0xC0, 0xE0, 0xE0, 0xE0, 0xE0, 0x00,
+0x00, 0xE0, 0xE0, 0xC0, 0xC0, 0xE0,
+0xE0, 0xE0, 0xE0, 0xE0, 0xC0, 0x80,
+0x00, 0x00, 0x00, 0x00, 0x80, 0xC0,
+0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0,
+0xE0, 0xE0, 0xC0, 0x80, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xF8, 0xFC, 0xFE,
+0xFF, 0xE0, 0x00, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0x80, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0x1F, 0x07, 0x01, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xFF, 0xFF, 0xFF, 0x81, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x81,
+0xC3, 0xC3, 0xC3, 0x00, 0x00, 0xFF,
+0xFF, 0xFF, 0x81, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x81, 0xFF, 0xFF,
+0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF,
+0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xFF, 0xFF, 0xFF, 0x01, 0x00,
+0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF,
+0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF,
+0x9D, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+0x1C, 0x9D, 0xDF, 0xDF, 0xDF, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x03, 0x0F, 0x1F,
+0x3F, 0x3F, 0x3F, 0x3F, 0x1F, 0x1F,
+0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x3F,
+0x3F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+0x7F, 0x7C, 0x78, 0x78, 0x38, 0x1C,
+0x0F, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x03, 0x07, 0x07,
+0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
+0x03, 0x01, 0x00, 0x00, 0x00, 0x00,
+0x01, 0x03, 0x07, 0x07, 0x07, 0x07,
+0x07, 0x07, 0x07, 0x07, 0x03, 0x01,
+0x00, 0x00, 0x00, 0x07, 0x07, 0x07,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x07, 0x07, 0x07, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x07, 0x07,
+0x07, 0x00, 0x00, 0x00, 0x01, 0x03,
+0x07, 0x07, 0x07, 0x07, 0x07, 0x07,
+0x07, 0x07, 0x03, 0x01, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};

keyboards/anavi/macropad8/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "ANAVI Macro Pad 8",
+  "url": "",
+  "maintainer": "leon-anavi",
+  "width": 4,
+  "height": 2,
+  "layouts": {
+    "LAYOUT_ortho_2x4": {
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}]
+    }
+  }
+}

keyboards/anavi/macropad8/keymaps/default/keymap.c

@@ -0,0 +1,61 @@
+#include QMK_KEYBOARD_H
+
+#define _MAIN 0
+#define _FN 1
+
+#define KC_X0 LT(_FN, KC_ESC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_MAIN] = LAYOUT_ortho_2x4(
+     G(KC_D), KC_UP,   C(KC_C), C(KC_V),
+     KC_LEFT, KC_DOWN, KC_RGHT, MO(_FN)
+  ),
+
+  [_FN] = LAYOUT_ortho_2x4(
+     RGB_TOG, RGB_MOD, RGB_M_R, RGB_M_SN,
+     BL_TOGG, BL_STEP, BL_BRTG, _______
+  )
+};
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+}
+
+void oled_task_user(void) {
+  // Host Keyboard Layer Status
+  oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false);
+  oled_write_P(PSTR("Active layer:"), false);
+
+  switch (get_highest_layer(layer_state)) {
+    case _MAIN:
+      oled_write_ln_P(PSTR("Main"), false);
+      break;
+    case _FN:
+      oled_write_ln_P(PSTR("FN"), false);
+      break;
+    default:
+      // Or use the write_ln shortcut over adding '\n' to the end of your string
+      oled_write_ln_P(PSTR("N/A"), false);
+  }
+
+  // Host Keyboard LED Status
+  led_t led_state = host_keyboard_led_state();
+  oled_write_P(PSTR("Num Lock: "), false);
+  oled_write_ln_P(led_state.num_lock ? PSTR("On") : PSTR("Off"), false);
+  oled_write_P(PSTR("Caps Lock: "), false);
+  oled_write_ln_P(led_state.caps_lock ? PSTR("On") : PSTR("Off"), false);
+  oled_write_P(PSTR("Scroll Lock: "), false);
+  oled_write_ln_P(led_state.scroll_lock ? PSTR("On") : PSTR("Off"), false);
+  oled_write_P(PSTR("Backlit: "), false);
+  oled_write_ln_P(is_backlight_enabled() ? PSTR("On") : PSTR("Off"), false);
+#ifdef RGBLIGHT_ENABLE
+  static char rgbStatusLine1[26] = {0};
+  snprintf(rgbStatusLine1, sizeof(rgbStatusLine1), "RGB Mode: %d", rgblight_get_mode());
+  oled_write_ln(rgbStatusLine1, false);
+  static char rgbStatusLine2[26] = {0};
+  snprintf(rgbStatusLine2, sizeof(rgbStatusLine2), "h:%d s:%d v:%d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val());
+  oled_write_ln(rgbStatusLine2, false);
+#endif
+}
+#endif

keyboards/anavi/macropad8/keymaps/kodi/keymap.c

@@ -0,0 +1,68 @@
+#include QMK_KEYBOARD_H
+
+#define _MAIN 0
+#define _FN 1
+
+#define KC_X0 LT(_FN, KC_ESC)
+
+#ifdef RGBLIGHT_ENABLE
+// How long (in ms) to wait between animation steps for the rainbow mode
+const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {60, 30, 15};
+// How long (in milliseconds) to wait between animation steps for each of the "Swirling rainbow" animations
+const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {20, 10, 4};
+#endif
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_MAIN] = LAYOUT_ortho_2x4(
+     KC_ESC, KC_UP, KC_ENTER, KC_X,
+     KC_LEFT, KC_DOWN, KC_RIGHT, MO(_FN)
+  ),
+
+  [_FN] = LAYOUT_ortho_2x4(
+     RGB_TOG, RGB_MOD, RGB_M_R, RGB_M_SN,
+     BL_TOGG, BL_STEP, BL_BRTG, _______
+  )
+};
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
+}
+
+void oled_task_user(void) {
+  // Host Keyboard Layer Status
+  oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false);
+  oled_write_P(PSTR("Active layer:"), false);
+
+  switch (get_highest_layer(layer_state)) {
+    case _MAIN:
+      oled_write_ln_P(PSTR("Main"), false);
+      break;
+    case _FN:
+      oled_write_ln_P(PSTR("FN"), false);
+      break;
+    default:
+      // Or use the write_ln shortcut over adding '\n' to the end of your string
+      oled_write_ln_P(PSTR("N/A"), false);
+  }
+
+  // Host Keyboard LED Status
+  led_t led_state = host_keyboard_led_state();
+  oled_write_P(PSTR("Num Lock: "), false);
+  oled_write_ln_P(led_state.num_lock ? PSTR("On") : PSTR("Off"), false);
+  oled_write_P(PSTR("Caps Lock: "), false);
+  oled_write_ln_P(led_state.caps_lock ? PSTR("On") : PSTR("Off"), false);
+  oled_write_P(PSTR("Scroll Lock: "), false);
+  oled_write_ln_P(led_state.scroll_lock ? PSTR("On") : PSTR("Off"), false);
+  oled_write_P(PSTR("Backlit: "), false);
+  oled_write_ln_P(is_backlight_enabled() ? PSTR("On") : PSTR("Off"), false);
+#ifdef RGBLIGHT_ENABLE
+  static char rgbStatusLine1[26] = {0};
+  snprintf(rgbStatusLine1, sizeof(rgbStatusLine1), "RGB Mode: %d", rgblight_get_mode());
+  oled_write_ln(rgbStatusLine1, false);
+  static char rgbStatusLine2[26] = {0};
+  snprintf(rgbStatusLine2, sizeof(rgbStatusLine2), "h:%d s:%d v:%d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val());
+  oled_write_ln(rgbStatusLine2, false);
+#endif
+}
+#endif

keyboards/anavi/macropad8/macropad8.c

@@ -0,0 +1 @@
+#include "macropad8.h"

keyboards/anavi/macropad8/macropad8.h

@@ -0,0 +1,11 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_ortho_2x4( \
+    k01, k02, k03, k04, \
+    k05, k06, k07, k08  \
+  ) { \
+    { k01, k02, k03, k04 }, \
+    { k05, k06, k07, k08 } \
+}

keyboards/anavi/macropad8/readme.md

@@ -0,0 +1,18 @@
+# ANAVI Macro Pad 8
+
+
+ANAVI Macro Pad 8 is an open source mini mechanical keyboard with 8 keys, backlit, addressable RGB WS2812B LED strip on the back and mini OLED display. Powered by ATmega32U4 microcontroller and with microUSB connector.
+
+* Keyboard Maintainer: [Leon Anavi](https://github.com/leon-anavi)
+* Hardware Supported: ANAVI Macro Pad 8
+* Hardware Availability: [PCB Files](https://github.com/AnaviTechnology/anavi-macro-pad-8)
+
+Make example for this keyboard (after setting up your build environment):
+
+    qmk compile -kb anavi/macropad8 -km default
+
+Flash to ANAVI Macro Pad 8:
+
+    qmk flash -kb anavi/macropad8 -km default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/anavi/macropad8/rules.mk

@@ -0,0 +1,32 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = yes        # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
+OLED_DRIVER_ENABLE = yes     # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend

keyboards/atxkb/1894/1894.c

@@ -0,0 +1,16 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "1894.h"

keyboards/atxkb/1894/1894.h

@@ -0,0 +1,86 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K213, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K312, K313, \
+	K400, K401, K402,       K404,       K406,       K408,             K410, K411, K412, K413  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+	{ K400,  K401,  K402,  KC_NO, K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413 }  \
+}
+
+#define LAYOUT_60_ansi( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K013, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K213, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,             K312, \
+	K400, K401, K402,                   K406,                         K410, K411, K412, K413  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, K213 }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO}, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413 }  \
+}
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K213, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K312, K313, \
+	K400, K401, K402,                   K406,                         K410, K411, K412, K413  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413 }  \
+}
+
+#define LAYOUT_60_tsangan_hhkb( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K213, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K312, K313, \
+	K400, K401, K402,                         K406,                         K411, K412, K413  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, KC_NO, K411,  K412,  K413 }  \
+}

keyboards/atxkb/1894/config.h

@@ -0,0 +1,169 @@
+/*
+Copyright 2019 Ryota Goto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5458 // TX
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    atxkb
+#define PRODUCT         1894
+#define DESCRIPTION     atxkb 1894
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B1, B2, B3, F0, F1 }
+#define MATRIX_COL_PINS { F4, F7, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+#define RGB_DI_PIN D2
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 14
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  // #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/atxkb/1894/info.json

@@ -0,0 +1,277 @@
+{
+    "keyboard_name": "1894",
+    "url": "https://atxkb.com",
+    "maintainer": "austexcn",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Delete", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"|", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"Print Screen", "x":14, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":2.25},
+                {"x":6, "y":4, "w":1.25},
+                {"x":7.25, "y":4, "w":2.75},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_ansi": {
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0, "w":2},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":2.75},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_ansi_split_bs_rshift": {
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Delete", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"Print Screen", "x":14, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+                {"label":"Win", "x":1.25, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"label":"Alt", "x":10, "y":4, "w":1.25},
+                {"label":"Win", "x":11.25, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_tsangan_hhkb": {
+            "layout": [
+                {"label":"~", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Delete", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"Print Screen", "x":14, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.5},
+                {"label":"Win", "x":1.5, "y":4},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+                {"x":4, "y":4, "w":7},
+                {"label":"Alt", "x":11, "y":4, "w":1.5},
+                {"label":"Win", "x":12.5, "y":4},
+                {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}
+            ]
+        }
+    }
+}

keyboards/atxkb/1894/keymaps/default/keymap.c

@@ -0,0 +1,39 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_all( /* Base */
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,
+    MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,
+    KC_LSFT, KC_BSLS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_DEL,
+    KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,                    KC_RALT, KC_RGUI, KC_APP,  KC_RCTL
+  ),
+  [_FN] = LAYOUT_all( /* FN */
+    RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_BSPC,
+    _______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP,   _______, KC_MPRV, KC_MPLY, KC_MNXT,          BL_STEP,
+    _______, KC_HOME, KC_PGDN, KC_END,  _______, KC_VOLD, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,                   _______,
+    _______, _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______,          KC_PSCR, _______,
+    _______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______
+  )
+};
+

keyboards/atxkb/1894/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# The default keymap for 1894
+
+Fits just about everything on two layers.

keyboards/atxkb/1894/keymaps/default_ansi_tsangan/keymap.c

@@ -0,0 +1,38 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_60_tsangan_hhkb( /* Base */
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,
+    MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,
+    KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_DEL,
+    KC_LCTL, KC_LGUI, KC_LALT,                                     KC_SPC,                                      KC_RALT, KC_RGUI, KC_RCTL
+  ),
+  [_FN] = LAYOUT_60_tsangan_hhkb( /* FN */
+    RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_BSPC,
+    _______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP,   _______, KC_MPRV, KC_MPLY, KC_MNXT,          BL_STEP,
+    _______, KC_HOME, KC_PGDN, KC_END,  _______, KC_VOLD, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,                   _______,
+    _______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______,          KC_PSCR, _______,
+    _______, _______, _______,                                     _______,                                     _______, _______, _______
+  )
+};

keyboards/atxkb/1894/keymaps/default_ansi_tsangan/readme.md

@@ -0,0 +1,3 @@
+# The default_ansi_tsangan keymap for 1894
+
+Simplified down to the basic ANSI Tsangan layouts for ease of configuration.

keyboards/atxkb/1894/keymaps/via/keymap.c

@@ -0,0 +1,55 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _BASE,
+    _FN,
+    _EXTRA_ONE,
+    _EXTRA_TWO
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_all( /* Base */
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,
+    MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,
+    KC_LSFT, KC_BSLS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_DEL,
+    KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,                    KC_RALT, KC_RALT, KC_RGUI, KC_RCTL
+  ),
+  [_FN] = LAYOUT_all( /* FN */
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_BSPC,
+    _______, _______, _______, KC_PGUP, _______, _______, _______, _______, KC_UP,   _______, _______, _______, _______,          BL_STEP,
+    _______, _______, KC_HOME, KC_PGDN, KC_END,  _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,                   _______,
+    _______, _______, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______,          KC_PSCR, _______,
+    _______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______
+  ),
+  [_EXTRA_ONE] = LAYOUT_all( /* Layer 3 */
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______
+  ),
+  [_EXTRA_TWO] = LAYOUT_all( /* Layer 3 */
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______
+  )
+};
+

keyboards/atxkb/1894/keymaps/via/readme.md

@@ -0,0 +1,3 @@
+# The via keymap for 1894
+
+For via configurator use

keyboards/atxkb/1894/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/atxkb/1894/readme.md

@@ -0,0 +1,15 @@
+# atxkb 1894
+
+![atxkb 1894](https://i.imgur.com/epXYdPA.jpg)
+
+1894 is a keyboard PCB supporting 60% layouts. It is a revised version of the [Voyager60](https://github.com/ai03-2725/Voyager60) pcb by [ai03](https://github.com/ai03-2725) that supports a JST connector instead of usb-c and has perimeter cutouts for gasket support. The Voyager60 and therefore the 1894 is compatible with ai03's [polaris](https://github.com/austexcn/qmk_firmware/tree/master/keyboards/ai03/polaris) QMK implementation and as such this is just a copy with edits to update the name.
+
+* Keyboard Maintainer: [austexcn](https://github.com/austexcn)
+* Hardware Supported: atxkb Moontower
+* Hardware Availability: [atxkb](https://atxkb.com)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make atxkb/1894:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/atxkb/1894/rules.mk

@@ -0,0 +1,34 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+LTO_ENABLE = yes
+
+LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_tsangan_hhkb

keyboards/atxkb/readme.md

@@ -0,0 +1,3 @@
+# atxkb
+
+Website: [atxkb](https://atxkb.com)

keyboards/bat43/bat43.h

@@ -1,46 +1,10 @@
-/* Copyright 2020 yfuku
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
 #pragma once
 
+#ifdef KEYBOARD_bat43_rev1
+    #include "rev1.h"
+#endif
+#ifdef KEYBOARD_bat43_rev2
+    #include "rev2.h"
+#endif
+
 #include "quantum.h"
-
-/* This is a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
-
-
-#define LAYOUT( \
-    k00, k01, k02, k03, k04, k05,      k40, k41, k42, k43, k44, k45, \
-    k10, k11, k12, k13, k14, k15, k30, k50, k51, k52, k53, k54, k55, \
-    k20, k21, k22, k23, k24, k25,      k60, k61, k62, k63, k64, k65, \
-                   k33, k34, k35,      k70, k71, k72, \
-                        k74, k75,      k73, k31, k32 \
-) { \
-    { k00, k01, k02, k03, k04, k05 }, \
-    { k10, k11, k12, k13, k14, k15 }, \
-    { k20, k21, k22, k23, k24, k25 }, \
-    { k30, k31, k32, k33, k34, k35 }, \
-    { k40, k41, k42, k43, k44, k45 }, \
-    { k50, k51, k52, k53, k54, k55 }, \
-    { k60, k61, k62, k63, k64, k65 }, \
-    { k70, k71, k72, k73, k74, k75 }, \
-}

keyboards/bat43/rev1/rev1.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 yfuku
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev1.h"

keyboards/bat43/rev1/rev1.h

@@ -0,0 +1,46 @@
+/* Copyright 2020 yfuku
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05,      k40, k41, k42, k43, k44, k45, \
+    k10, k11, k12, k13, k14, k15, k30, k50, k51, k52, k53, k54, k55, \
+    k20, k21, k22, k23, k24, k25,      k60, k61, k62, k63, k64, k65, \
+                   k33, k34, k35,      k70, k71, k72, \
+                        k74, k75,      k73, k31, k32 \
+) { \
+    { k00, k01, k02, k03, k04, k05 }, \
+    { k10, k11, k12, k13, k14, k15 }, \
+    { k20, k21, k22, k23, k24, k25 }, \
+    { k30, k31, k32, k33, k34, k35 }, \
+    { k40, k41, k42, k43, k44, k45 }, \
+    { k50, k51, k52, k53, k54, k55 }, \
+    { k60, k61, k62, k63, k64, k65 }, \
+    { k70, k71, k72, k73, k74, k75 }, \
+}

keyboards/bat43/rev1/rules.mk

@@ -0,0 +1 @@
+

keyboards/bat43/rev2/info.json

@@ -0,0 +1,71 @@
+{
+    "keyboard_name": "bat43",
+    "url": "",
+    "maintainer": "yfuku",
+    "width": 15,
+    "height": 5.1,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"k00", "x":0, "y":1.43},
+                {"label":"k01", "x":1, "y":1.11},
+                {"label":"k02", "x":2, "y":0.38},
+                {"label":"k03", "x":3, "y":0},
+                {"label":"k04", "x":4, "y":0.05},
+                {"label":"k05", "x":5, "y":0.16},
+
+                {"label":"k40", "x":9, "y":0.16},
+                {"label":"k41", "x":10, "y":0.05},
+                {"label":"k42", "x":11, "y":0},
+                {"label":"k43", "x":12, "y":0.38},
+                {"label":"k44", "x":13, "y":1.11},
+                {"label":"k45", "x":14, "y":1.43},
+
+                {"label":"k10", "x":0, "y":2.43},
+                {"label":"k11", "x":1, "y":2.11},
+                {"label":"k12", "x":2, "y":1.38},
+                {"label":"k13", "x":3, "y":1},
+                {"label":"k14", "x":4, "y":1.05},
+                {"label":"k15", "x":5, "y":1.16},
+
+                {"label":"k30", "x":7, "y":1.16},
+
+                {"label":"k50", "x":9, "y":1.16},
+                {"label":"k51", "x":10, "y":1.05},
+                {"label":"k52", "x":11, "y":1},
+                {"label":"k53", "x":12, "y":1.38},
+                {"label":"k54", "x":13, "y":2.11},
+                {"label":"k55", "x":14, "y":2.43},
+
+                {"label":"k20", "x":0, "y":3.43},
+                {"label":"k21", "x":1, "y":3.11},
+                {"label":"k22", "x":2, "y":2.38},
+                {"label":"k23", "x":3, "y":2},
+                {"label":"k24", "x":4, "y":2.05},
+                {"label":"k25", "x":5, "y":2.16},
+
+                {"label":"k60", "x":9, "y":2.16},
+                {"label":"k61", "x":10, "y":2.05},
+                {"label":"k62", "x":11, "y":2},
+                {"label":"k63", "x":12, "y":2.38},
+                {"label":"k64", "x":13, "y":3.11},
+                {"label":"k65", "x":14, "y":3.43},
+
+                {"label":"k33", "x":4, "y":3.3},
+                {"label":"k34", "x":5, "y":3.3},
+                {"label":"k35", "x":6, "y":3.3},
+
+                {"label":"k70", "x":8, "y":3.3},
+                {"label":"k71", "x":9, "y":3.3},
+                {"label":"k72", "x":10, "y":3.3},
+
+                {"label":"k75", "x":5.1, "y":4.3, "w":0.8, "h":0.8},
+                {"label":"k74", "x":6.1, "y":4.3, "w":0.8, "h":0.8},
+
+                {"label":"k73", "x":8.1, "y":4.3, "w":0.8, "h":0.8},
+                {"label":"k31", "x":9.1, "y":4.3, "w":0.8, "h":0.8},
+                {"label":"k32", "x":10.1, "y":4.3, "w":0.8, "h":0.8}
+            ]
+        }
+    }
+}

keyboards/bat43/rev2/rev2.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 yfuku
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev2.h"

keyboards/bat43/rev2/rev2.h

@@ -0,0 +1,46 @@
+/* Copyright 2020 yfuku
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05,      k40, k41, k42, k43, k44, k45, \
+    k10, k11, k12, k13, k14, k15, k30, k50, k51, k52, k53, k54, k55, \
+    k20, k21, k22, k23, k24, k25,      k60, k61, k62, k63, k64, k65, \
+                   k33, k34, k35,      k70, k71, k72, \
+                        k75, k74,      k73, k31, k32 \
+) { \
+    { k00, k01, k02, k03, k04, k05 }, \
+    { k10, k11, k12, k13, k14, k15 }, \
+    { k20, k21, k22, k23, k24, k25 }, \
+    { k30, k31, k32, k33, k34, k35 }, \
+    { k40, k41, k42, k43, k44, k45 }, \
+    { k50, k51, k52, k53, k54, k55 }, \
+    { k60, k61, k62, k63, k64, k65 }, \
+    { k70, k71, k72, k73, k74, k75 }, \
+}

keyboards/bat43/rev2/rules.mk

@@ -0,0 +1 @@
+

keyboards/bat43/rules.mk

@@ -30,3 +30,5 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+DEFAULT_FOLDER = bat43/rev2

keyboards/boardwalk/boardwalk.h

@@ -17,6 +17,21 @@
   { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k410, k411, k412, k413 } \
 }
 
+#define LAYOUT_ortho_2x2u( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, \
+  k40, k41, k42, k43, k44,   k45,     k47,     k49, k410, k411, k412, k413  \
+) \
+{ \
+  { k00,   k01, k02, k03, k04, k05, k06,   k07, k08,   k09, k010, k011, k012, k013   }, \
+  { k10,   k11, k12, k13, k14, k15, k16,   k17, k18,   k19, k110, k111, k112, k113   }, \
+  { k20,   k21, k22, k23, k24, k25, k26,   k27, k28,   k29, k210, k211, k212, k213   }, \
+  { k30,   k31, k32, k33, k34, k35, k36,   k37, k38,   k39, k310, k311, k312, k313   }, \
+  { k40,   k41, k42, k43, k44, k45, KC_NO, k47, KC_NO, k49, k410, k411, k412, k413   } \
+}
+
 #define LAYOUT_ortho_hhkb( \
   k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, \
   k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, \

keyboards/clawsome/sidekick/config.h

@@ -0,0 +1,37 @@
+/*
+Copyright 2020 AAClawson (AlisGraveNil)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xDB9F
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    AlisGraveNil
+#define PRODUCT         Sidekick
+#define DESCRIPTION     A 27-key QMK-powered macropad
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 7
+
+#define MATRIX_ROW_PINS { D0, C6, B2, B6, B5 }
+#define MATRIX_COL_PINS { F6, F5, B1, B3, E6, D7, D4 }
+
+#define DIODE_DIRECTION COL2ROW

keyboards/clawsome/sidekick/info.json

@@ -0,0 +1,40 @@
+{
+    "keyboard_name": "Sidekick",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 7,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"K00 (D0,F6)", "x":0, "y":0},
+                {"label":"K01 (D0,F5)", "x":1, "y":0},
+                {"label":"K02 (D0,B1)", "x":2, "y":0},
+                {"label":"K03 (D0,B3)", "x":3, "y":0},
+                {"label":"K04 (D0,E6)", "x":4, "y":0},
+                {"label":"K05 (D0,D7)", "x":5, "y":0},
+                {"label":"K06 (D0,D4)", "x":6, "y":0},
+                {"label":"K10 (C6,F6)", "x":0, "y":1},
+                {"label":"K11 (C6,F5)", "x":1, "y":1},
+                {"label":"K12 (C6,B1)", "x":2, "y":1},
+                {"label":"K13 (C6,B3)", "x":3, "y":1},
+                {"label":"K14 (C6,E6)", "x":4, "y":1},
+                {"label":"K15 (C6,D7)", "x":5, "y":1},
+                {"label":"K16 (C6,D4)", "x":6, "y":1, "h":2},
+                {"label":"K23 (B2,B3)", "x":3, "y":2},
+                {"label":"K24 (B2,E6)", "x":4, "y":2},
+                {"label":"K25 (B2,D7)", "x":5, "y":2},
+                {"label":"K31 (B6,F5)", "x":1, "y":3},
+                {"label":"K33 (B6,B3)", "x":3, "y":3},
+                {"label":"K34 (B6,E6)", "x":4, "y":3},
+                {"label":"K35 (B6,D7)", "x":5, "y":3},
+                {"label":"K36 (B6,D4)", "x":6, "y":3, "h":2},
+                {"label":"K40 (B5,F6)", "x":0, "y":4},
+                {"label":"K41 (B5,F5)", "x":1, "y":4},
+                {"label":"K42 (B5,B1)", "x":2, "y":4},
+                {"label":"K43 (B5,B3)", "x":3, "y":4, "w":2},
+                {"label":"K45 (B5,D7)", "x":5, "y":4}
+            ]
+        }
+    }
+}

keyboards/clawsome/sidekick/keymaps/default/keymap.c

@@ -0,0 +1,41 @@
+/* Copyright 2020 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   /*
+    * ------------------------------------
+    * |INS |HOME|PGUP|NUM | /  | *  | -  |
+    * ------------------------------------
+    * |DEL |END |PGDN| 7  | 8  | 9  | +  |
+    * ------------------------------|    |
+    * |    |    |    | 4  | 5  | 6  |    |
+    * ------------------------------------
+    * |    | UP |    | 1  | 2  | 3  |ENT |
+    * ------------------------------|    |
+    * |LEFT|DOWN|RGHT| 0       | .  |    |
+    * ------------------------------------
+    */
+    [0] = LAYOUT(
+        KC_INS,  KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_DEL,  KC_END,  KC_PGDN, KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+                                   KC_P4,   KC_P5,   KC_P6,
+                 KC_UP,            KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,            KC_PDOT
+    ),
+
+};
+

keyboards/clawsome/sidekick/readme.md

@@ -0,0 +1,14 @@
+# Sidekick
+
+This is a 5x7 macropad designed to be used with any 60% or less board.
+You still need those arrow keys and that num-pad, so here it is, in a conveniently move-able package!
+
+- Keyboard Maintainer: [AAClawson](https://github.com/AlisGraveNil)
+- Hardware Supported: Sidekick 2.0a & 2.0b, Pro Micro, Elite-C
+- Hardware Availability: Not available yet; will be sold at a later date
+
+Make example for this keyboard (after setting up your build environment):
+
+    make clawsome/sidekick:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/clawsome/sidekick/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes        # Mouse keys
+EXTRAKEY_ENABLE = yes        # Audio control and System control
+CONSOLE_ENABLE = yes         # Console for debug
+COMMAND_ENABLE = yes         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no        # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no             # USB Nkey Rollover
+BACKLIGHT_ENABLE = no        # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no         # Enable keyboard RGB underglow
+MIDI_ENABLE = no             # MIDI support
+UNICODE_ENABLE = no          # Unicode
+BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no            # Audio output on port C6
+FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches

keyboards/clawsome/sidekick/sidekick.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "sidekick.h"

keyboards/clawsome/sidekick/sidekick.h

@@ -0,0 +1,33 @@
+/* Copyright 2020 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06,   \
+    K10, K11, K12, K13, K14, K15, K16,   \
+                   K23, K24, K25,        \
+         K31,      K33, K34, K35, K36,   \
+    K40, K41, K42, K43,      K45         \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16   }, \
+    { KC_NO, KC_NO, KC_NO, K23,   K24,   K25,   KC_NO }, \
+    { KC_NO, K31,   KC_NO, K33,   K34,   K35,   K36   }, \
+    { K40,   K41,   K42,   K43,   KC_NO, K45,   KC_NO }, \
+}
+

keyboards/clueboard/66/keymaps/via/keymap.c

@@ -0,0 +1,46 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+#define _BL 0
+#define _FL 1
+#define _CL 2
+#define _EL 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: Base Layer (Default Layer)
+   */
+[_BL] = LAYOUT_66_ansi(
+  KC_GESC,KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL,      KC_BSPC,           KC_PGUP,
+  KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,                KC_PGDN,
+  KC_CAPS,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,      KC_ENT,
+  KC_LSFT,        KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,          KC_RSFT,        KC_UP,
+  KC_LCTL,KC_LGUI,KC_LALT,                        KC_SPC,                                 KC_RALT,MO(_FL),KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT),
+
+  /* Keymap _FL: Function Layer
+   */
+[_FL] = LAYOUT_66_ansi(
+  KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12,      KC_DEL,            KC_VOLU,
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_MUTE,                KC_VOLD,
+  _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,    _______,
+  _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        KC_PGUP,
+  _______,_______,_______,                        _______,                                _______,MO(_FL),_______,KC_HOME,KC_PGDN,KC_END),
+
+  /* Keymap _CL: Control layer
+   */
+[_CL] = LAYOUT_66_ansi(
+  BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______,   RGB_TOG,           RGB_VAI,
+  _______,_______,_______,_______,RESET,  _______,_______,_______,_______,_______,_______,_______,_______,_______,                RGB_VAD,
+  _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,    _______,
+  _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        RGB_SAI,
+  _______,_______,_______,                        RGB_MOD,                                _______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI),
+
+  /* Keymap _EL: Empty layer
+   */
+[_EL] = LAYOUT_66_ansi(
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,     _______,           _______,
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,                _______,
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,     _______,
+  _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        _______,
+  _______,_______,_______,                        _______,                                _______,_______,_______,_______,_______,_______)
+};

keyboards/clueboard/66/keymaps/via/rules.mk

@@ -0,0 +1,4 @@
+# rules.mk overrides to enable VIA
+
+VIA_ENABLE = yes
+LINK_TIME_OPTIMIZATION_ENABLE = yes

keyboards/duck/readme.md

@@ -14,4 +14,5 @@ Lightsaver V3
 Octagon V1  
 Octagon V2  
 Orion V3  
-Viper V2  
+TC-V3  
+Viper V2  

keyboards/duck/tcv3/config.h

@@ -0,0 +1,45 @@
+/*
+Copyright 2019 MechMerlin <mechmerlin@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x444B // Duck ("DK")
+#define PRODUCT_ID      0x5443 // TC-V3 ("TC")
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Duck
+#define PRODUCT         TC-V3
+#define DESCRIPTION     Duck TC-V3
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 20
+
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+#define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN D6
+#define RGBLED_NUM 17
+
+/* Set to top left most key */
+#define BOOTMAGIC_LITE_ROW 5
+#define BOOTMAGIC_LITE_COLUMN 10

keyboards/duck/tcv3/indicator_leds.c

@@ -0,0 +1,123 @@
+/*
+Copyright 2019 MechMerlin <mechmerlin@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <stdbool.h>
+#include <util/delay.h>
+#include "indicator_leds.h"
+
+#define LED_T1H  900
+#define LED_T1L  600
+#define LED_T0H  400
+#define LED_T0L  900
+
+void send_bit_d4(bool bitVal) {
+  if(bitVal) {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (4),
+        [onCycles]  "I" (NS_TO_CYCLES(LED_T1H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2));
+  } else {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (4),
+        [onCycles]  "I" (NS_TO_CYCLES(LED_T0H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2));
+  }
+}
+
+void send_bit_d6(bool bitVal)
+{
+  if(bitVal) {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (6),
+        [onCycles]  "I" (NS_TO_CYCLES(LED_T1H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2));
+  } else {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (6),
+        [onCycles]  "I" (NS_TO_CYCLES(LED_T0H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2));
+  }
+}
+
+void send_value(uint8_t byte, enum Device device) {
+  for(uint8_t b = 0; b < 8; b++) {
+    if(device == Device_STATUSLED) {
+      send_bit_d4(byte & 0b10000000);
+    }
+    if(device == Device_PCBRGB) {
+      send_bit_d6(byte & 0b10000000);
+    }
+    byte <<= 1;
+  }
+}
+
+void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device) {
+  send_value(r, device);
+  send_value(g, device);
+  send_value(b, device);
+}
+
+// Port from backlight_set_state
+void indicator_leds_set(bool leds[8]) {
+  cli();
+  send_color(leds[1] ? 255 : 0, leds[2] ? 255 : 0, leds[0] ? 255 : 0, Device_STATUSLED);
+  send_color(leds[4] ? 255 : 0, leds[3] ? 255 : 0, leds[5] ? 255 : 0, Device_STATUSLED);
+  leds[6] ? (PORTD &= ~0b10000000) : (PORTD |= 0b10000000);
+  sei();
+  show();
+}

keyboards/duck/tcv3/indicator_leds.h

@@ -0,0 +1,7 @@
+#include "duck_led/duck_led.h"
+
+void indicator_leds_set(bool leds[8]);
+void backlight_toggle_rgb(bool enabled);
+void backlight_set_rgb(uint8_t cfg[17][3]);
+void backlight_init_ports(void);
+void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device);

keyboards/duck/tcv3/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "TCV3", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 19.5, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2.25, "y":0}, {"x":4.25, "y":0}, {"x":5.25, "y":0}, {"x":6.25, "y":0}, {"x":7.25, "y":0}, {"x":8.75, "y":0}, {"x":9.75, "y":0}, {"x":10.75, "y":0}, {"x":11.75, "y":0}, {"x":13.25, "y":0}, {"x":14.25, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.5, "y":0}, {"x":18.5, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2.25, "y":1.25}, {"x":3.25, "y":1.25}, {"x":4.25, "y":1.25}, {"x":5.25, "y":1.25}, {"x":6.25, "y":1.25}, {"x":7.25, "y":1.25}, {"x":8.25, "y":1.25}, {"x":9.25, "y":1.25}, {"x":10.25, "y":1.25}, {"x":11.25, "y":1.25}, {"x":12.25, "y":1.25}, {"x":13.25, "y":1.25}, {"x":14.25, "y":1.25}, {"x":15.25, "y":1.25}, {"x":16.25, "y":1.25}, {"x":17.5, "y":1.25}, {"x":18.5, "y":1.25}, {"x":0, "y":2.25}, {"x":1, "y":2.25}, {"x":2.25, "y":2.25, "w":1.5}, {"x":3.75, "y":2.25}, {"x":4.75, "y":2.25}, {"x":5.75, "y":2.25}, {"x":6.75, "y":2.25}, {"x":7.75, "y":2.25}, {"x":8.75, "y":2.25}, {"x":9.75, "y":2.25}, {"x":10.75, "y":2.25}, {"x":11.75, "y":2.25}, {"x":12.75, "y":2.25}, {"x":13.75, "y":2.25}, {"x":14.75, "y":2.25}, {"x":15.75, "y":2.25, "w":1.5}, {"x":17.5, "y":2.25}, {"x":18.5, "y":2.25}, {"x":0, "y":3.25}, {"x":1, "y":3.25}, {"x":2.25, "y":3.25, "w":1.75}, {"x":4, "y":3.25}, {"x":5, "y":3.25}, {"x":6, "y":3.25}, {"x":7, "y":3.25}, {"x":8, "y":3.25}, {"x":9, "y":3.25}, {"x":10, "y":3.25}, {"x":11, "y":3.25}, {"x":12, "y":3.25}, {"x":13, "y":3.25}, {"x":14, "y":3.25}, {"x":15, "y":3.25}, {"x":16, "y":3.25, "w":1.25}, {"x":17.5, "y":3.25}, {"x":18.5, "y":3.25}, {"x":0, "y":4.25}, {"x":1, "y":4.25}, {"x":2.25, "y":4.25, "w":1.25}, {"x":3.5, "y":4.25}, {"x":4.5, "y":4.25}, {"x":5.5, "y":4.25}, {"x":6.5, "y":4.25}, {"x":7.5, "y":4.25}, {"x":8.5, "y":4.25}, {"x":9.5, "y":4.25}, {"x":10.5, "y":4.25}, {"x":11.5, "y":4.25}, {"x":12.5, "y":4.25}, {"x":13.5, "y":4.25}, {"x":14.5, "y":4.25, "w":1.75}, {"x":16.25, "y":4.25}, {"x":17.5, "y":4.5}, {"x":0, "y":5.25}, {"x":1, "y":5.25}, {"x":2.25, "y":5.25, "w":1.5}, {"x":3.75, "y":5.25}, {"x":4.75, "y":5.25, "w":1.5}, {"x":6.25, "y":5.25, "w":6}, {"x":12.25, "y":5.25, "w":1.5}, {"x":13.75, "y":5.25}, {"x":14.75, "y":5.25, "w":1.5}, {"x":16.5, "y":5.5}, {"x":17.5, "y":5.5}, {"x":18.5, "y":5.5}]
+        },
+
+        "LAYOUT": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2.25, "y":0}, {"x":4.25, "y":0}, {"x":5.25, "y":0}, {"x":6.25, "y":0}, {"x":7.25, "y":0}, {"x":8.75, "y":0}, {"x":9.75, "y":0}, {"x":10.75, "y":0}, {"x":11.75, "y":0}, {"x":13.25, "y":0}, {"x":14.25, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.5, "y":0}, {"x":18.5, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2.25, "y":1.25}, {"x":3.25, "y":1.25}, {"x":4.25, "y":1.25}, {"x":5.25, "y":1.25}, {"x":6.25, "y":1.25}, {"x":7.25, "y":1.25}, {"x":8.25, "y":1.25}, {"x":9.25, "y":1.25}, {"x":10.25, "y":1.25}, {"x":11.25, "y":1.25}, {"x":12.25, "y":1.25}, {"x":13.25, "y":1.25}, {"x":14.25, "y":1.25}, {"x":15.25, "y":1.25, "w":2}, {"x":17.5, "y":1.25}, {"x":18.5, "y":1.25}, {"x":0, "y":2.25}, {"x":1, "y":2.25}, {"x":2.25, "y":2.25, "w":1.5}, {"x":3.75, "y":2.25}, {"x":4.75, "y":2.25}, {"x":5.75, "y":2.25}, {"x":6.75, "y":2.25}, {"x":7.75, "y":2.25}, {"x":8.75, "y":2.25}, {"x":9.75, "y":2.25}, {"x":10.75, "y":2.25}, {"x":11.75, "y":2.25}, {"x":12.75, "y":2.25}, {"x":13.75, "y":2.25}, {"x":14.75, "y":2.25}, {"x":15.75, "y":2.25, "w":1.5}, {"x":17.5, "y":2.25}, {"x":18.5, "y":2.25}, {"x":0, "y":3.25}, {"x":1, "y":3.25}, {"x":2.25, "y":3.25, "w":1.75}, {"x":4, "y":3.25}, {"x":5, "y":3.25}, {"x":6, "y":3.25}, {"x":7, "y":3.25}, {"x":8, "y":3.25}, {"x":9, "y":3.25}, {"x":10, "y":3.25}, {"x":11, "y":3.25}, {"x":12, "y":3.25}, {"x":13, "y":3.25}, {"x":14, "y":3.25}, {"x":15, "y":3.25, "w":2.25}, {"x":17.5, "y":3.25}, {"x":18.5, "y":3.25}, {"x":0, "y":4.25}, {"x":1, "y":4.25}, {"x":2.25, "y":4.25, "w":2.25}, {"x":4.5, "y":4.25}, {"x":5.5, "y":4.25}, {"x":6.5, "y":4.25}, {"x":7.5, "y":4.25}, {"x":8.5, "y":4.25}, {"x":9.5, "y":4.25}, {"x":10.5, "y":4.25}, {"x":11.5, "y":4.25}, {"x":12.5, "y":4.25}, {"x":13.5, "y":4.25}, {"x":14.5, "y":4.25, "w":2.75}, {"x":17.5, "y":4.5}, {"x":0, "y":5.25}, {"x":1, "y":5.25}, {"x":2.25, "y":5.25, "w":1.5}, {"x":3.75, "y":5.25}, {"x":4.75, "y":5.25, "w":1.5}, {"x":6.25, "y":5.25, "w":6}, {"x":12.25, "y":5.25, "w":1.5}, {"x":13.75, "y":5.25}, {"x":14.75, "y":5.25, "w":1.5}, {"x":16.5, "y":5.5}, {"x":17.5, "y":5.5}, {"x":18.5, "y":5.5}]
+        }
+    }
+}

keyboards/duck/tcv3/keymaps/default/keymap.c

@@ -0,0 +1,37 @@
+/* Copyright 2019 MechMerlin <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _BL 0 // Base Layer
+#define _FL 1 // Fn Layer
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BL] = LAYOUT(\
+        KC_F1,  KC_F2,    KC_ESC,           KC_F1,   KC_F2,  KC_F3,  KC_F4,      KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,     KC_PSCR, KC_PAUS, 
+        KC_F3,  KC_F4,    KC_GRV,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,        KC_INS,  KC_DEL, 
+        KC_F5,  KC_F6,    KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,        KC_HOME, KC_END, 
+        KC_F7,  KC_F8,    KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,         KC_PGUP, KC_PGDN, 
+        KC_F9,  KC_F10,   KC_LSFT, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                          KC_UP,   
+        KC_F11, KC_F12,   KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                                   MO(_FL), KC_RGUI, KC_RCTL,        KC_LEFT, KC_DOWN, KC_RGHT),
+
+    [_FL] = LAYOUT(\
+        KC_TRNS, KC_TRNS,   KC_TRNS,          RGB_TOG, RGB_MOD, RGB_VAI,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,              KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,              KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,              KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                KC_TRNS, 
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,                                                  KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/duck/tcv3/keymaps/via/config.h

@@ -0,0 +1 @@
+#define DYNAMIC_KEYMAP_LAYER_COUNT 3

keyboards/duck/tcv3/keymaps/via/keymap.c

@@ -0,0 +1,42 @@
+/* Copyright 2019 MechMerlin <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(\
+        KC_F1,  KC_F2,    KC_ESC,           KC_F1,   KC_F2,  KC_F3,  KC_F4,      KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,     KC_PSCR, KC_PAUS, 
+        KC_F3,  KC_F4,    KC_GRV,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,        KC_INS,  KC_DEL, 
+        KC_F5,  KC_F6,    KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,        KC_HOME, KC_END, 
+        KC_F7,  KC_F8,    KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,         KC_PGUP, KC_PGDN, 
+        KC_F9,  KC_F10,   KC_LSFT, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                          KC_UP,   
+        KC_F11, KC_F12,   KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                                   MO(1), KC_RGUI, KC_RCTL,        KC_LEFT, KC_DOWN, KC_RGHT),
+
+    [1] = LAYOUT(\
+        KC_TRNS, KC_TRNS,   KC_TRNS,          RGB_TOG, RGB_MOD, RGB_VAI,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,              KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,              KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,              KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                KC_TRNS, 
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,                                                  KC_TRNS, KC_TRNS, KC_TRNS),
+
+    [2] = LAYOUT(\
+        KC_TRNS, KC_TRNS,   KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,              KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,              KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,              KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                KC_TRNS, 
+        KC_TRNS, KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,                                                  KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/duck/tcv3/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/duck/tcv3/matrix.c

@@ -0,0 +1,272 @@
+/*
+Copyright 2019 MechMerlin <mechmerlin@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <util/delay.h>
+#include <avr/io.h>
+#include <stdio.h>
+#include "matrix.h"
+#include "util.h"
+#include "print.h"
+#include "debug.h"
+#include "debounce.h"
+#include "wait.h"
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static uint8_t read_rows(uint8_t col);
+static void init_rows(void);
+static void unselect_cols(void);
+static void select_col(uint8_t col);
+
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void backlight_init_ports(void)
+{
+  // DDRD  |=  0b11010000;
+  // PORTD &= ~0b01010000;
+  // PORTD |=  0b10000000;
+  // DDRB  |=  0b00011111;
+  // PORTB &= ~0b00001110;
+  // PORTB |=  0b00010001;
+  // DDRE  |=  0b01000000;
+  // PORTE &= ~0b01000000;
+}
+
+void matrix_init(void) {
+  backlight_init_ports();
+  unselect_cols();
+  init_rows();
+
+  for (uint8_t i=0; i < MATRIX_ROWS; i++)  {
+    matrix[i] = 0;
+    matrix_debouncing[i] = 0;
+  }
+
+  debounce_init(MATRIX_ROWS);
+
+  matrix_init_quantum();
+}
+uint8_t matrix_scan(void) {
+    bool changed = false;
+
+    for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+    select_col(col);
+    wait_us(30);
+
+    uint8_t rows = read_rows(col);
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+      bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+      bool curr_bit = rows & (1<<row);
+      if (prev_bit != curr_bit) {
+        matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+        changed = true;
+      }
+    }
+    unselect_cols();
+  }
+
+  debounce(matrix, matrix_debouncing, MATRIX_ROWS, changed);
+
+  matrix_scan_quantum();
+  return (uint8_t)changed;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+  return matrix[row];
+}
+
+void matrix_print(void) {
+  print("\nr/c 0123456789ABCDEF\n");
+  for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+    xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
+  }
+}
+/* Row pin configuration
+ * row: 0    1    2    3    4    5
+ * pin: PB7  PD0  PD1  PD2  PD3  PD5
+ *
+ * Reset Key uses its own pin PE2
+ */
+static void init_rows(void) {
+    DDRD  &= ~0b00101111;
+    PORTD &= ~0b00101111;
+
+    DDRB  &= ~0b10000000;
+    PORTB &= ~0b10000000;
+
+    DDRE  &= ~0b00000100;
+    PORTE |=  0b00000100;
+}
+
+static uint8_t read_rows(uint8_t col) {
+  if (col == 20) {
+    return PINE&(1<<2) ? 0 : (1<<0);
+  } else {
+      return (PIND&(1<<0) ? (1<<1) : 0) |
+             (PIND&(1<<1) ? (1<<2) : 0) |
+             (PIND&(1<<2) ? (1<<3) : 0) |
+             (PIND&(1<<3) ? (1<<4) : 0) |
+             (PIND&(1<<5) ? (1<<5) : 0) |
+             (PINB&(1<<7) ? (1<<0) : 0);
+    }
+}
+
+
+/* Columns 0 - G
+ * These columns uses two 74HC237D 3 to 8 bit demultiplexers.
+ *
+ * atmega32u4    decoder    pin
+ *    C6           U1       E2
+ *    B6           U2       E2
+ *    F0          U1, U2    A0
+ *    F1          U1, U2    A1
+ *    C7          U1, U2    A2
+ *
+ * col 0: B4
+ * col 1: D7
+ * col I: B5
+ *
+ * col / pin:    PC6  PB6  PF0  PF1  PC7  Decoder Pin
+ * 2:             1    0    0    0    0     U1    Y0
+ * 3:             1    0    1    0    0     U1    Y1
+ * 4:             1    0    0    1    0     U1    Y2
+ * 5:             1    0    1    1    0     U1    Y3
+ * 6:             1    0    0    0    1     U1    Y4
+ * 7:             1    0    1    0    1     U1    Y5
+ * 8:             1    0    0    1    1     U1    Y6
+ * 9:             1    0    1    1    1     U1    Y7
+ * A:             0    1    0    0    0     U2    Y0
+ * B:             0    1    1    0    0     U2    Y1
+ * C:             0    1    0    1    0     U2    Y2
+ * D:             0    1    1    1    0     U2    Y3
+ * E:             0    1    0    0    1     U2    Y4
+ * F:             0    1    1    0    1     U2    Y5
+ * G:             0    1    0    1    1     U2    Y6
+ * H:             0    1    1    1    1     U2    Y7
+ *
+ */
+static void unselect_cols(void) {
+  DDRB  |=  0b01110000;
+  PORTB &= ~0b01110000;
+
+  DDRC  |=  0b11000000;
+  PORTC &= ~0b11000000;
+
+  DDRD  |=  0b10000000;
+  PORTD &= ~0b10000000;
+
+  DDRF  |=  0b00000011;
+  PORTF &= ~0b00000011;
+}
+
+static void select_col(uint8_t col) {
+ 
+   switch (col) {
+        case 0:
+            PORTB |= 0b00010000;
+            break;
+        case 1:
+            PORTD |= 0b10000000;
+            break;
+        case 2: // U1 Y0
+            PORTC |= 0b01000000;
+            break;
+        case 3: // U1 Y1
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000001;
+            break;
+        case 4: // U1 Y2
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000010;
+            break;
+        case 5: // U1 Y3
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000011;
+            break;
+        case 6: // U1 Y4
+            PORTC |= 0b11000000;
+            break;
+        case 7: // U1 Y5
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000001;
+            break;
+        case 8: // U1 Y6
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000010;
+            break;
+        case 9: // U1 Y7
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000011;
+            break;
+        case 10: // U2 Y0
+            PORTB |= 0b01000000;
+            break;
+        case 11: // U2 Y1
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000001;
+            break;
+        case 12: // U2 Y2
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000010;
+            break;
+        case 13: // U2 Y3
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000011;
+            break;
+        case 14: // U2 Y4
+            PORTB |= 0b01000000;
+            PORTC |= 0b10000000;
+            break;
+        case 15: // U2 Y5
+            PORTB |= 0b01000000;
+            PORTC |= 0b10000000;
+            PORTF |= 0b00000001;
+            break;
+        case 16: // U2 Y6
+            PORTB |= 0b01000000;
+            PORTC |= 0b10000000;
+            PORTF |= 0b00000010;
+            break;
+        case 17: // U2 Y7
+            PORTB |= 0b01000000;
+            PORTC |= 0b10000000;
+            PORTF |= 0b00000011;
+            break;
+        case 18:
+            PORTB |= 0b00100000;
+            break;
+    }
+}

keyboards/duck/tcv3/readme.md

@@ -0,0 +1,27 @@
+# Duck TC-V3
+
+Non official firmware for custom Korean keyboard made by Duck.  
+Group buy was run April 2018 via [geekhack](https://geekhack.org/index.php?topic=95335.0).  
+
+* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+* Hardware Supported: Duck TC-V3 ver 1.0 PCB, Atmega32u4, 74HC237D 
+* Hardware Availability: Wait until GB of the next revision
+
+Make example for this keyboard (after setting up your build environment):
+
+    make duck/tcv3:default
+
+**Reset Key:** To put the TC-V3 into reset, hold the top second most right key (`K0J`) while plugging in. 
+
+**CAUTION:** At this time 02/28/20 backlighting has not been tested fully and may not properly work. 
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+
+## Hardware Notes
+
+The Duck TC-V3 PCB consists of:
+
+### Microchips
+* 2 74HC237D 3-to-8 line decoders
+* 1 Atmega32u4 microcontroller
+* 3 WS2811 LED controller

keyboards/duck/tcv3/rules.mk

@@ -0,0 +1,36 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = no        # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+RGBLIGHT_ENABLE = yes
+
+CUSTOM_MATRIX = yes
+SRC += indicator_leds.c \
+			 matrix.c duck_led/duck_led.c

keyboards/duck/tcv3/tcv3.c

@@ -0,0 +1,134 @@
+/* Copyright 2019 MechMerlin <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "tcv3.h"
+#include "indicator_leds.h"
+
+enum BACKLIGHT_AREAS {
+  BACKLIGHT_ALPHA    = 0b0000001,
+  BACKLIGHT_FROW     = 0b0000010,
+  BACKLIGHT_MOD      = 0b0000100,
+  BACKLIGHT_MACRO    = 0b0001000,
+  BACKLIGHT_SWITCH   = 0b0001111
+};
+
+// uint8_t backlight_rgb_r = 255;
+// uint8_t backlight_rgb_g = 0;
+// uint8_t backlight_rgb_b = 0;
+// uint8_t backlight_os_state = 0;
+// uint32_t backlight_layer_state = 0;
+
+// void backlight_toggle_rgb(bool enabled)
+// {
+//   if(enabled) {
+//     uint8_t rgb[17][3] = {
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+//       {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}
+//     };
+//     backlight_set_rgb(rgb);
+//   } else {
+//     uint8_t rgb[17][3] = {
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0},
+//       {0, 0, 0}
+//     };
+//     backlight_set_rgb(rgb);
+//   }
+// }
+
+// void backlight_set_rgb(uint8_t cfg[17][3])
+// {
+//   cli();
+//   for(uint8_t i = 0; i < 17; ++i) {
+//     send_color(cfg[i][0], cfg[i][1], cfg[i][2], Device_PCBRGB);
+//   }
+//   sei();
+//   show();
+// }
+
+// Q5, Q6, Q7 is connected to B1 - alphas
+// Q8, Q9 is connected to B2 - frow
+// Q1, Q2, Q3 is connected to B3 - mods
+// Q4 is connected to E6 - macro keys 
+
+void backlight_set(uint8_t level) {
+  level & BACKLIGHT_ALPHA ? (PORTB |= 0b00000010) : (PORTB &= ~0b00000010);
+  level & BACKLIGHT_FROW ? (PORTB |= 0b00000100) : (PORTB &= ~0b00000100);
+  level & BACKLIGHT_MOD ? (PORTB |= 0b00001000) : (PORTB &= ~0b00001000);
+  level & BACKLIGHT_MACRO ? (PORTE |= 0b01000000) : (PORTE &= ~0b01000000);
+}
+
+// // Port from backlight_update_state
+// void led_set_kb(uint8_t usb_led) {
+//     bool status[7] = {
+//     backlight_os_state & (1<<USB_LED_CAPS_LOCK),
+//     backlight_os_state & (1<<USB_LED_SCROLL_LOCK),
+//     backlight_os_state & (1<<USB_LED_NUM_LOCK),
+//     backlight_layer_state & (1<<1),
+//     backlight_layer_state & (1<<2),
+//     backlight_layer_state & (1<<3),
+//     backlight_layer_state & (1<<4)
+//   };
+//   indicator_leds_set(status);
+//   backlight_os_state & (1<<USB_LED_CAPS_LOCK) ? (PORTB &= ~0b00000001) : (PORTB |= 0b00000001);
+//   backlight_os_state & (1<<USB_LED_SCROLL_LOCK) ? (PORTB &= ~0b00010000) : (PORTB |= 0b00010000);
+// }
+
+// bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+//   return process_record_user(keycode, record);
+// }
+
+// U5 Pin 1, 2, 3 connected to top left LEDs
+
+// U6 Pin 1, 2, 3 connected to bottom right leds col of 3
+// U7 Pin 1 connected to row connected to bottom right leds solo LED
+// U7 Pin 2, 3 connected to bottom right leds row of 2
+// U6 Pin 5 connected to U7 Pin 6
+
+// U5 pin 5 connected to U6 Pin 6
+
+// U5, U6, U7 Pin 8 VCC
+// U5, U6, U7 Pin 4 GRND
+
+// U5 Pin 6 connected to atmega32u4 D4

keyboards/duck/tcv3/tcv3.h

@@ -0,0 +1,53 @@
+/* Copyright 2019 MechMerlin <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+#define LAYOUT_all( \
+    K00, K01,   K02,      K04, K05, K06, K07,   K09, K0A, K0B, K0C,    K0D, K0E, K0F, K0G,   K0J, K0I, \
+    K10, K11,   K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G,   K1H, K1I, \
+    K20, K21,   K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E,      K2G,   K2H, K2I, \
+    K30, K31,   K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,      K3G,   K3H, K3I, \
+    K40, K41,   K42, k43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C,      K4E, K4F, K4G,  K4H,       \
+    K50, K51,   K52, K53, K54,                          K5A,      K5C,      K5E, K5F,  K5G, K5H, K5I   \
+) { \
+  { K00, K01,   K02, XXX, K04, K05, K06, K07, XXX, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, XXX, K0I, K0J }, \
+  { K10, K11,   K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, XXX }, \
+  { K20, K21,   K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, XXX, K2G, K2H, K2I, XXX }, \
+  { K30, K31,   K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, XXX, K3G, K3H, K3I, XXX }, \
+  { K40, K41,   K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, XXX, K4E, K4F, K4G, K4H, XXX, XXX }, \
+  { K50, K51,   K52, K53, K54, XXX, XXX, XXX, XXX, XXX, K5A, XXX, K5C, XXX, K5E, K5F, K5G, K5H, K5I, XXX }, \
+}
+
+
+#define LAYOUT( \
+    K00, K01,   K02,      K04, K05, K06, K07,   K09, K0A, K0B, K0C,    K0D, K0E, K0F, K0G,   K0J, K0I, \
+    K10, K11,   K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E,      K1G,   K1H, K1I, \
+    K20, K21,   K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E,      K2G,   K2H, K2I, \
+    K30, K31,   K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,           K3G,   K3H, K3I, \
+    K40, K41,   K42,      K44, K45, K46, K47, K48, K49, K4A, K4B, K4C,      K4E, K4F,       K4H,       \
+    K50, K51,   K52, K53, K54,                          K5A,      K5C,      K5E, K5F,  K5G, K5H, K5I   \
+) { \
+  { K00, K01,   K02, XXX, K04, K05, K06, K07, XXX, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, XXX, K0I, K0J }, \
+  { K10, K11,   K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, XXX, K1G, K1H, K1I, XXX }, \
+  { K20, K21,   K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, XXX, K2G, K2H, K2I, XXX }, \
+  { K30, K31,   K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX, K3G, K3H, K3I, XXX }, \
+  { K40, K41,   K42, XXX, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, XXX, K4E, K4F, XXX, K4H, XXX, XXX }, \
+  { K50, K51,   K52, K53, K54, XXX, XXX, XXX, XXX, XXX, K5A, XXX, K5C, XXX, K5E, K5F, K5G, K5H, K5I, XXX }, \
+}

keyboards/ergodox_stm32/readme.md

@@ -0,0 +1,9 @@
+# ergodox_stm32
+
+* Keyboard Maintainer: [Codetector1374](https://github.com/Codetector1374)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ergodox_stm32:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/gami_studio/lex60/info.json

@@ -0,0 +1,79 @@
+{
+    "keyboard_name": "Gami Studio Lex60",
+    "url": "",
+    "maintainer": "GamiStudio",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"1", "x":1, "y":0},
+                {"label":"2", "x":2, "y":0},
+                {"label":"3", "x":3, "y":0},
+                {"label":"4", "x":4, "y":0},
+                {"label":"5", "x":5, "y":0},
+                {"label":"6", "x":6, "y":0},
+                {"label":"7", "x":7, "y":0},
+                {"label":"8", "x":8, "y":0},
+                {"label":"9", "x":9, "y":0},
+                {"label":"0", "x":10, "y":0},
+                {"label":"-", "x":11, "y":0},
+                {"label":"=", "x":12, "y":0},
+                {"label":"\\", "x":13, "y":0},
+                {"label":"Backspace", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"[", "x":11.5, "y":1},
+                {"label":"]", "x":12.5, "y":1},
+                {"label":"\\", "x":13.5, "y":1, "w":1.5},
+                {"label":"LCtl / Esc", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":";", "x":10.75, "y":2},
+                {"label":"'", "x":11.75, "y":2},
+                {"label":"ISO #", "x":12.75, "y":2},
+                {"label":"Enter", "x":13.75, "y":2, "w":1.25},
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"ISO \\", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":",", "x":9.25, "y":3},
+                {"label":".", "x":10.25, "y":3},
+                {"label":"/", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"Up", "x":14, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.5},
+                {"label":"GUI", "x":1.5, "y":4, "w":1.5},
+                {"label":"LAlt", "x":3, "y":4, "w":1.5},
+                {"label":"Space", "x":4.5, "y":4, "w":2.25},
+                {"label":"Fn / Enter", "x":6.75, "y":4, "w":2.75},
+                {"label":"GUI", "x":9.5, "y":4, "w":1.5},
+                {"label":"RAlt", "x":11, "y":4, "w":1.25},
+                {"label":"Menu", "x":12.25, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}
+            ]
+        }
+    }
+}

keyboards/gboards/g/keymap_combo.h

@@ -11,14 +11,21 @@
     case name:                            \
         if (pressed) SEND_STRING(string); \
         break;
-#define BLANK(...)
 
+#define A_TOGG(name, layer, ...)          \
+    case name:                            \
+        if (pressed) layer_invert(layer); \
+        break;
+
+#define BLANK(...)
 // Generate data needed for combos/actions
 // Create Enum
 #undef COMB
 #undef SUBS
+#undef TOGG
 #define COMB K_ENUM
 #define SUBS A_ENUM
+#define TOGG A_ENUM
 enum combos {
 #include "combos.def"
 };
@@ -26,20 +33,25 @@ enum combos {
 // Bake combos into mem
 #undef COMB
 #undef SUBS
+#undef TOGG
 #define COMB K_DATA
 #define SUBS A_DATA
+#define TOGG A_DATA
 #include "combos.def"
 #undef COMB
 #undef SUBS
+#undef TOGG
 
 // Fill combo array
 #define COMB K_COMB
 #define SUBS A_COMB
+#define TOGG A_COMB
 combo_t key_combos[] = {
 #include "combos.def"
 };
 #undef COMB
 #undef SUBS
+#undef TOGG
 
 // Export length to combo module
 int COMBO_LEN = sizeof(key_combos) / sizeof(key_combos[0]);
@@ -47,10 +59,17 @@ int COMBO_LEN = sizeof(key_combos) / sizeof(key_combos[0]);
 // Fill QMK hook
 #define COMB BLANK
 #define SUBS A_ACTI
+#define TOGG A_TOGG
 void process_combo_event(uint8_t combo_index, bool pressed) {
     switch (combo_index) {
 #include "combos.def"
     }
+
+    // Allow user overrides per keymap
+#if __has_include("inject.h") 
+# include "inject.h"
+#endif
 }
 #undef COMB
 #undef SUBS
+#undef TOGG

keyboards/handwired/juliet/config.h

@@ -0,0 +1,220 @@
+/*
+Copyright 2020 na-cly
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID       0x6B62
+#define PRODUCT_ID      0x4069
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    nacly
+#define PRODUCT         juliet
+#define DESCRIPTION     Pro Micro Enabled ROMEO: ROMEO by coseyfannitutti
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+
+/* A Custom matrix.c is used to poll the port expander C6 shows that the pins are hardwired there */
+/*                        0   1   2   3   4   5   6   7   8   9  10  11*/
+#define MATRIX_ROW_PINS { F5, D2, D3, F4 }
+#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, B4, B5, B1, B3, B2, B6}
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+
+/* Bootmagic Lite key configuration
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+*/

keyboards/handwired/juliet/info.json

@@ -0,0 +1,21 @@
+{
+    "keyboard_name": "juliet", 
+    "url": "https://github.com/Na-Cly/juliet", 
+    "maintainer": "Na-Cly", 
+    "width": 13, 
+    "height": 4, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"1.5u", "x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"label":"1.5u", "x":11.5, "y":0, "w":1.5}, {"label":"1.75u", "x":0, "y":1, "w":1.75}, {"x":1.75, "y":1}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"label":"2.25u", "x":10.75, "y":1, "w":2.25}, {"label":"1.25u", "x":0, "y":2, "w":1.25}, {"x":1.25, "y":2}, {"x":2.25, "y":2}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"label":"1.75u", "x":11.25, "y":2, "w":1.75}, {"label":"1.25u", "x":0, "y":3, "w":1.25}, {"label":"1u", "x":1.25, "y":3}, {"label":"1.25u", "x":2.25, "y":3, "w":1.25}, {"label":"2.25u", "x":3.5, "y":3, "w":2.25}, {"label":"1u", "x":5.75, "y":3}, {"label":"2.75u", "x":6.75, "y":3, "w":2.75}, {"label":"1.25u", "x":9.5, "y":3, "w":1.25}, {"label":"1u", "x":10.75, "y":3}, {"label":"1.25u", "x":11.75, "y":3, "w":1.25}]
+        },
+        "LAYOUT_ansi_split_lshift": {
+            "layout": [{"label":"1.5u", "x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"label":"1.5u", "x":11.5, "y":0, "w":1.5}, {"label":"1.75u", "x":0, "y":1, "w":1.75}, {"x":1.75, "y":1}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"label":"2.25u", "x":10.75, "y":1, "w":2.25}, {"label":"1.25u", "x":0, "y":2, "w":1.25}, {"x":1.25, "y":2}, {"x":2.25, "y":2}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"label":"1.75u", "x":11.25, "y":2, "w":1.75}, {"label":"1.25u", "x":0, "y":3, "w":1.25}, {"label":"1u", "x":1.25, "y":3}, {"label":"1u", "x":2.25, "y":3}, {"label":"6.25u", "x":3.25, "y":3, "w":6.25}, {"label":"1.25u", "x":9.5, "y":3, "w":1.25}, {"label":"1u", "x":10.75, "y":3}, {"label":"1.25u", "x":11.75, "y":3, "w":1.25}]
+        },
+        "LAYOUT_ansi_split_space": {
+            "layout": [{"label":"1.5u", "x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"label":"1.5u", "x":11.5, "y":0, "w":1.5}, {"label":"1.75u", "x":0, "y":1, "w":1.75}, {"x":1.75, "y":1}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"label":"2.25u", "x":10.75, "y":1, "w":2.25}, {"label":"2.25u", "x":0, "y":2, "w":2.25}, {"x":2.25, "y":2}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"label":"1.75u", "x":11.25, "y":2, "w":1.75}, {"label":"1.25u", "x":0, "y":3, "w":1.25}, {"label":"1u", "x":1.25, "y":3}, {"label":"1.25u", "x":2.25, "y":3, "w":1.25}, {"label":"2.25u", "x":3.5, "y":3, "w":2.25}, {"label":"1u", "x":5.75, "y":3}, {"label":"2.75u", "x":6.75, "y":3, "w":2.75}, {"label":"1.25u", "x":9.5, "y":3, "w":1.25}, {"label":"1u", "x":10.75, "y":3}, {"label":"1.25u", "x":11.75, "y":3, "w":1.25}]
+        },
+        "LAYOUT_ansi_40": {
+            "layout": [{"label":"1.5u", "x":0, "y":0, "w":1.5}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"label":"1.5u", "x":11.5, "y":0, "w":1.5}, {"label":"1.75u", "x":0, "y":1, "w":1.75}, {"x":1.75, "y":1}, {"x":2.75, "y":1}, {"x":3.75, "y":1}, {"x":4.75, "y":1}, {"x":5.75, "y":1}, {"x":6.75, "y":1}, {"x":7.75, "y":1}, {"x":8.75, "y":1}, {"x":9.75, "y":1}, {"label":"2.25u", "x":10.75, "y":1, "w":2.25}, {"label":"2.25u", "x":0, "y":2, "w":2.25}, {"x":2.25, "y":2}, {"x":3.25, "y":2}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"label":"1.75u", "x":11.25, "y":2, "w":1.75}, {"label":"1.25u", "x":0, "y":3, "w":1.25}, {"label":"1u", "x":1.25, "y":3}, {"label":"1u", "x":2.25, "y":3}, {"label":"6.25u", "x":3.25, "y":3, "w":6.25}, {"label":"1.25u", "x":9.5, "y":3, "w":1.25}, {"label":"1u", "x":10.75, "y":3}, {"label":"1.25u", "x":11.75, "y":3, "w":1.25}]        
+        }
+    }
+}

keyboards/handwired/juliet/juliet.c

@@ -0,0 +1,16 @@
+/* Copyright 2019 coseyfannitutti
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "juliet.h"

keyboards/handwired/juliet/juliet.h

@@ -0,0 +1,76 @@
+/* Copyright 2019 coseyfannitutti
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define _x_ KC_NO
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,      K1B, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+  K30, K31, K32,      K34,      K36, K37,      K39, K3A, K3B  \
+) { \
+{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, }, \
+{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, _x_, K1B, }, \
+{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, }, \
+{ K30, K31, K32, _x_, K34, _x_, K36, K37, _x_, K39, K3A, K3B, }  \
+}
+
+#define LAYOUT_ansi_40( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,      K1B, \
+  K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+  K30, K31, K32,                K36,           K39, K3A, K3B  \
+) { \
+{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, }, \
+{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, _x_, K1B, }, \
+{ K20, _x_, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, }, \
+{ K30, K31, K32, _x_, _x_, _x_, K36, _x_, _x_, K39, K3A, K3B, }  \
+}
+
+#define LAYOUT_ansi_split_lshift( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,      K1B, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+  K30, K31, K32,                K36,           K39, K3A, K3B  \
+) { \
+{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, }, \
+{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, _x_, K1B, }, \
+{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, }, \
+{ K30, K31, K32, _x_, _x_, _x_, K36, _x_, _x_, K39, K3A, K3B, }  \
+}
+
+#define LAYOUT_ansi_split_space( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,      K1B, \
+  K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+  K30, K31, K32,      K34,      K36, K37,      K39, K3A, K3B  \
+) { \
+{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, }, \
+{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, _x_, K1B, }, \
+{ K20, _x_, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, }, \
+{ K30, K31, K32, _x_, K34, _x_, K36, K37, _x_, K39, K3A, K3B, }  \
+}

keyboards/handwired/juliet/keymaps/default/keymap.c

@@ -0,0 +1,31 @@
+/* Copyright 2019 COSEYFANNITUTTI
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_all(
+      KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, 
+      KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT,
+      KC_LSFT, KC_SLSH, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT,
+      KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_ENT, KC_SPC, KC_RALT, MO(1), KC_RCTL ),
+
+  [1] = LAYOUT_all(
+  	  KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
+  	  KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_ENT,
+  	  KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_SLSH, KC_TRNS,
+  	  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS )
+};

keyboards/handwired/juliet/readme.md

@@ -0,0 +1,15 @@
+# juliet
+
+Pro Micro Enabled ROMEO.
+
+Original PCB design by coseyfannitutti
+
+* Keyboard Maintainer: [NaCly](https://github.com/Na-Cly)
+* Hardware Supported: juliet PCB, Pro Micro
+* Hardware Availability: https://github.com/Na-Cly/juliet
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/juliet:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/juliet/rules.mk

@@ -0,0 +1,32 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/handwired/myskeeb/readme.md

@@ -0,0 +1,11 @@
+# myskeeb
+
+Handwired Keyboard based on the Ergodash, with an OLED similar to Kyria.
+
+* Keyboard Maintainer: [su8044](https://github.com/su8044)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/myskeeb:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/novem/info.json

@@ -10,8 +10,12 @@
                 {"label":"k00", "x":0, "y":0},
                 {"label":"k01", "x":1, "y":0},
                 {"label":"k02", "x":2, "y":0},
-                {"label":"k10", "x":0, "y":1, "w":1.5},
+                {"label":"k03", "x":0, "y":1},
-                {"label":"k12", "x":1.5, "y":1, "w":1.5}
+                {"label":"k04", "x":1, "y":1},
+                {"label":"k05", "x":2, "y":1},
+                {"label":"k06", "x":0, "y":2},
+                {"label":"k07", "x":1, "y":2},
+                {"label":"k08", "x":2, "y":2}
             ]
         }
     }

keyboards/handwired/onekey/keymaps/adc/keymap.c

@@ -7,7 +7,7 @@ enum custom_keycodes {
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    LAYOUT(ADC_SAMPLE)  //
+    LAYOUT_ortho_1x1(ADC_SAMPLE)
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
@@ -16,7 +16,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
             if (record->event.pressed) {
                 int16_t val = analogReadPin(ADC_PIN);
 
-                char buffer [50];
+                char buffer[50];
                 sprintf(buffer, "ADC:%u\n", val);
 #ifdef CONSOLE_ENABLE
                     printf(buffer);
@@ -30,5 +30,5 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 };
 
 // adc_mux pinToMux(pin_t pin) {
-//     return TO_MUX( ADC_CHANNEL_IN1,  0 );
+//     return TO_MUX(ADC_CHANNEL_IN1, 0);
 // };

keyboards/handwired/onekey/keymaps/backlight/keymap.c

@@ -2,39 +2,38 @@
 
 //Tap Dance Declarations
 enum {
-  TD_BL = 0
+    TD_BL = 0
 };
 
-void dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) {
+void dance_cln_finished(qk_tap_dance_state_t *state, void *user_data) {
-  // noop
+    // noop
 }
 
-void dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) {
+void dance_cln_reset(qk_tap_dance_state_t *state, void *user_data) {
-  switch (state->count) {
+    switch (state->count) {
-    case 1:
+        case 1:
-      // single tap - step through backlight
+            // single tap - step through backlight
-      backlight_step();
+            backlight_step();
-      break;
+            break;
 #ifdef BACKLIGHT_BREATHING
-    case 2:
+        case 2:
-      // double tap - toggle breathing
+            // double tap - toggle breathing
-      breathing_toggle();
+            breathing_toggle();
-      break;
+            break;
-    case 3:
+        case 3:
-      //tripple tap - do some pulse stuff
+            // triple tap - do some pulse stuff
-      breathing_pulse();
+            breathing_pulse();
-      break;
+            break;
 #endif
-    default:
+        default:
-      // more - nothing
+            break;
-      break;
+    }
-  }
 }
 
 qk_tap_dance_action_t tap_dance_actions[] = {
-  [TD_BL]  = ACTION_TAP_DANCE_FN_ADVANCED (NULL, dance_cln_finished, dance_cln_reset)
+    [TD_BL]  = ACTION_TAP_DANCE_FN_ADVANCED(NULL, dance_cln_finished, dance_cln_reset)
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  LAYOUT( TD(TD_BL) )
+    LAYOUT_ortho_1x1(TD(TD_BL))
 };

keyboards/handwired/onekey/keymaps/default/keymap.c

@@ -1,5 +1,5 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  LAYOUT( KC_A )
+    LAYOUT_ortho_1x1(KC_A)
 };

keyboards/handwired/onekey/keymaps/default_json/keymap.json

@@ -1,9 +1,9 @@
 {
- "keyboard":"handwired/onekey/pytest",
+    "keyboard": "handwired/onekey/pytest",
- "keymap":"default_json",
+    "keymap": "default_json",
- "layout":"LAYOUT",
+    "layout": "LAYOUT_ortho_1x1",
- "layers":[["KC_A"]],
+    "layers": [["KC_A"]],
- "author":"qmk",
+    "author": "qmk",
- "notes":"This file is a keymap.json file for handwired/onekey/pytest",
+    "notes": "This file is a keymap.json file for handwired/onekey/pytest",
- "version":1
+    "version": 1
 }

keyboards/handwired/onekey/keymaps/eep_rst/keymap.c

@@ -1,5 +1,5 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  LAYOUT( EEP_RST )
+    LAYOUT_ortho_1x1(EEP_RST)
 };

keyboards/handwired/onekey/keymaps/i2c_scanner/keymap.c

@@ -21,7 +21,7 @@ i2c_status_t i2c_start_bodge(uint8_t address, uint16_t timeout) {
 #endif
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    LAYOUT(KC_A)  //
+    LAYOUT_ortho_1x1(KC_A)
 };
 
 void do_scan(void) {

keyboards/handwired/onekey/keymaps/reset/keymap.c

@@ -1,5 +1,5 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  LAYOUT( RESET )
+    LAYOUT_ortho_1x1(RESET)
 };

keyboards/handwired/onekey/keymaps/rgb/keymap.c

@@ -1,11 +1,11 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  LAYOUT( RGB_MOD )
+    LAYOUT_ortho_1x1(RGB_MOD)
 };
 
 void keyboard_post_init_user(void) {
-  rgblight_enable_noeeprom();
+    rgblight_enable_noeeprom();
-  rgblight_sethsv_noeeprom_cyan();
+    rgblight_sethsv_noeeprom_cyan();
-  rgblight_mode_noeeprom(RGBLIGHT_MODE_RAINBOW_SWIRL);
+    rgblight_mode_noeeprom(RGBLIGHT_MODE_RAINBOW_SWIRL);
 }

keyboards/handwired/onekey/onekey.h

@@ -18,8 +18,8 @@
 
 #include "quantum.h"
 
-#define LAYOUT( \
+#define LAYOUT_ortho_1x1( \
     k00 \
-  ) { \
+) { \
-    { k00 }  \
+    { k00 } \
 }

keyboards/hineybush/h10/config.h

@@ -0,0 +1,126 @@
+/*
+Copyright 2020 hineybush
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x04D8
+#define PRODUCT_ID 0xEBD8
+#define DEVICE_VER 0x0001
+#define MANUFACTURER hineybush
+#define PRODUCT h10
+#define DESCRIPTION Custom numpad PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, C6, B6, B5, B4, D7 }
+#define MATRIX_COL_PINS { F0, C7, B1, B2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0

keyboards/hineybush/h10/h10.c

@@ -0,0 +1,29 @@
+/* Copyright 2020 hineybush
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "h10.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+bool led_update_kb(led_t led_state) {
+    // placeholder for LED indicator added to next revision
+
+    return led_update_user(led_state);
+}
+*/