Issue 9942: Add LSA, RSA, RCS, LSA_T, RSA_T, and RCS_T (#9943 )

* Issue 9942: Add Quantum defines Add codes to quantum_keycodes for LSA, RSA, RCS, and their corresponding _T macros * 9942: Add documentation for new defines Add documentation for new defines in feature request 9942. Also define SAGR and SAGR_T as aliases for RSA and RSA_T. * Update quantum/quantum_keycodes.h * Update docs/keycodes.md * Update docs/keycodes.md * Update docs/keycodes.md * Update docs/keycodes.md
[Keymap] layer indicator lights (#10004 )
2020-08-17 02:08:15 -07:00 · 2020-08-17 01:33:57 -07:00 · 2020-08-17 01:32:07 -07:00 · 2020-08-17 01:19:52 -07:00 · 2020-08-16 19:15:30 -07:00 · 2020-08-16 18:44:56 -07:00
142 changed files with 6343 additions and 267 deletions
@@ -27,6 +27,7 @@
 # qmk-dfu        QMK DFU (LUFA + blinkenlight)
 # bootloadHID    HIDBootFlash compatible (ATmega32A)
 # USBasp         USBaspLoader (ATmega328P)
 # kiibohd        Input:Club Kiibohd bootloader (only used on their boards)
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -89,6 +90,18 @@ ifeq ($(strip $(BOOTLOADER)), lufa-ms)
    BOOTLOADER_SIZE = 6144
    FIRMWARE_FORMAT = bin
 endif
 ifeq ($(strip $(BOOTLOADER)), kiibohd)
    OPT_DEFS += -DBOOTLOADER_KIIBOHD
    ifeq ($(strip $(MCU)), MK20DX128)
        MCU_LDSCRIPT = MK20DX128BLDR4
    endif
    ifeq ($(strip $(MCU)), MK20DX256)
        MCU_LDSCRIPT = MK20DX256BLDR8
    endif
    DFU_ARGS = -d 1C11:B007
    DFU_SUFFIX_ARGS = -v 1C11 -p B007
 endif
 ifdef BOOTLOADER_SIZE
    OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
@@ -103,7 +103,7 @@
    * [DIP スイッチ](ja/feature_dip_switch.md)
    * [エンコーダ](ja/feature_encoders.md)
    * [触覚フィードバック](ja/feature_haptic_feedback.md)
-    * [Proton C 規約](ja/proton_c_conversion.md)
+    * [Proton C 変換](ja/proton_c_conversion.md)
    * [PS/2 マウス](ja/feature_ps2_mouse.md)
    * [分割キーボード](ja/feature_split_keyboard.md)
    * [速記](ja/feature_stenography.md)
@@ -111,6 +111,7 @@
    * [Velocikey](ja/feature_velocikey.md)
 * QMK の開発
  * [PR チェックリスト](ja/pr_checklist.md)
  * 互換性を破る変更/Breaking changes
    * [概要](ja/breaking_changes.md)
    * [プルリクエストにフラグが付けられた](ja/breaking_changes_instructions.md)
@@ -131,7 +132,7 @@
      * [WS2812 ドライバ](ja/ws2812_driver.md)
      * [EEPROM ドライバ](ja/eeprom_driver.md)
      * [シリアル ドライバ](ja/serial_driver.md)
-    * [GPIO コントロール](ja/internals_gpio_control.md)
+    * [GPIO 制御](ja/internals_gpio_control.md)
    * [キーボード ガイドライン](ja/hardware_keyboard_guidelines.md)
  * Python 開発
@@ -0,0 +1,97 @@
 # キーボードを Proton C を使うように変更
 <!---
  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
  original document: 0.9.46:docs/proton_c_conversion.md
  git diff 0.9.46 HEAD -- docs/proton_c_conversion.md | cat
 -->
 Proton C は Pro Micro の差し替え可能品であるため、簡単に使用することができます。
 このページでは、キーボードを変換するための便利な自動化されたプロセスと、Pro Micro では利用できない Proton C の機能を利用したい場合の手動プロセスについて説明しています。
 ## 自動で変換
 QMK で現在サポートされているキーボードが Pro Micro（または互換ボード）を使用しており、Proton C を使用したい場合は、以下のように make 引数に `CONVERT_TO_PROTON_C=yes` (または `CTPC=yes`) を追加することでファームウェアを生成することができます。
    make 40percentclub/mf68:default CTPC=yes
 同じ引数をキーマップの `rules.mk` に追加しても同じことができます。
 これは、次のように、`＃ifdef` を使用してコード内で使用できる `CONVERT_TO_PROTON_C` フラグを公開します。
 ```c
 #ifdef CONVERT_TO_PROTON_C
    // Proton C code
 #else
    // Pro Micro code
 #endif
 ```
 `PORTB/DDRB` などが定義されていないというエラーが発生した場合は、ARM と AVR の両方で機能する [GPIO 制御](ja/internals_gpio_control.md) を使用するようにキーボードのコードを変換する必要があります。これは AVR ビルドにまったく影響を与えません。
 Proton C には1つのオンボード LED(C13)しかなく、デフォルトでは TXLED(D5) がそれにマップされています。代わりに RXLED(B0) をそれにマッピングしたい場合は、`config.h` に次のように追加してください。
    #define CONVERT_TO_PROTON_C_RXLED
 ## 機能の変換
 下記は ARM ボードに実装されているものに基づいたデフォルトです。
 | 機能                                  | 説明                                                                               |
 |--------------------------------------|------------------------------------------------------------------------------------|
 | [オーディオ](ja/feature_audio.md)      | 有効                                                                      |
 | [RGB ライト](ja/feature_rgblight.md)  | 無効                                                                       |
 | [バックライト](feature_backlight.md)   | ARM が自動コンフィギュレーションを提供できるようになるまで、[タスク駆動 PWM](ja/(feature_backlight.md#software-pwm-driver))が強制されます |
 | USB ホスト (例えば USB-USB コンバータ)   | 未サポート (USB ホストコードは AVR 固有のもので、現在 ARM ではサポートされていません。 |
 | [分割キーボード](ja/feature_split_keyboard.md) | 部分的 - 有効にする機能に大きく依存します                               |
 ## 手動で変換
 `CTPC = yes` を指定せずに Proton C をネイティブで使用するには、`rules.mk` の `MCU`行を変更する必要があります：
 ```
 MCU = STM32F303
 ```
 次の変数が存在する場合は削除します。
 * `BOOTLOADER`
 * `EXTRA_FLAGS`
 最後に、`config.h`のすべてのピン割り当てを STM32 上の同等のものに変換します。
 | Pro Micro 左側| Proton C 左側 | | Proton C 右側 | Pro Micro 右側 |
 |--------------|--------------|-|--------------|---------------|
 | `D3`         | `A9`         | | 5v           | RAW (5v)      |
 | `D2`         | `A10`        | | GND          | GND           |
 | GND          | GND          | | FLASH        | RESET         |
 | GND          | GND          | | 3.3v         | Vcc <sup>1</sup> |
 | `D1`         | `B7`         | | `A2`         | `F4`          |
 | `D0`         | `B6`         | | `A1`         | `F5`          |
 | `D4`         | `B5`         | | `A0`         | `F6`          |
 | `C6`         | `B4`         | | `B8`         | `F7`          |
 | `D7`         | `B3`         | | `B13`        | `B1`          |
 | `E6`         | `B2`         | | `B14`        | `B3`          |
 | `B4`         | `B1`         | | `B15`        | `B2`          |
 | `B5`         | `B0`         | | `B9`         | `B6`          |
 | `B0` (RX LED) | `C13` <sup>2</sup> | | `C13` <sup>2</sup> | `D5` (TX LED) |
 また、Proton C の拡張部分にあるいくつかの新しいピンを利用することもできます。
 | 左側 | | 右側 |
 |------|-|-------|
 | `A4`<sup>3</sup> | | `B10` |
 | `A5`<sup>4</sup> | | `B11` |
 | `A6` | | `B12` |
 | `A7` | | `A14`<sup>5</sup> (SWCLK) |
 | `A8` | | `A13`<sup>5</sup> (SWDIO) |
 | `A15` | | RESET<sup>6</sup> |
 注釈:
 1. Pro Micro の Vcc は 3.3V または 5V にすることができます。
 2. Proton C のオンボード LED は、Pro Micro のように2つはありません、1つだけです。Pro Micro には、RX LED(`D5`) と TX LED(`B0`)があります。
 3. `A4` ピンは、スピーカーと共有されています。
 4. `A5` ピンは、スピーカーと共有されています。
 5. `A13` と `A14` ピンはハードウェアデバッグ (SWD) に使用されます。GPIO にも使えますが、最後に使ってください。
 6. RESET を 3.3V とショート(プルアップ)して MCU をリブートします。これは Pro Micro のようにブートローダモードにはならず、MCU をリセットするだけです。
@@ -381,45 +381,51 @@ See also: [Mouse Keys](feature_mouse_keys.md)
 See also: [Modifier Keys](feature_advanced_keycodes.md#modifier-keys)
-|Key       |Aliases                        |Description                                         |
+|Key       |Aliases                        |Description                                           |
-|----------|-------------------------------|----------------------------------------------------|
+|----------|-------------------------------|------------------------------------------------------|
-|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                      |
-|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                        |
-|`LALT(kc)`|`A(kc)`, `LOPT(kc)`            |Hold Left Alt and press `kc`                        |
+|`LALT(kc)`|`A(kc)`, `LOPT(kc)`            |Hold Left Alt and press `kc`                          |
-|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                          |
-|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                     |
-|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                       |
-|`RALT(kc)`|`ROPT(kc)`, `ALGR(kc)`         |Hold Right Alt and press `kc`                       |
+|`RALT(kc)`|`ROPT(kc)`, `ALGR(kc)`         |Hold Right Alt (AltGr) and press `kc`                 |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                         |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`                |
-|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`              |
-|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
+|`LSA(kc)` |                               |Hold Left Shift and Left Alt and press `kc`           |
-|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
+|`RSA(kc)` |`SAGR(kc)`                     |Hold Right Shift and Right Alt (AltGr) and press `kc` |
-|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
+|`RCS(kc)` |                               |Hold Right Control and Right Shift and press `kc`     |
-|`KC_MEH`  |                               |Left Control, Shift and Alt                         |
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`         |
-|`KC_HYPR` |                               |Left Control, Shift, Alt and GUI                    |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`       |
 |`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`  |
 |`KC_MEH`  |                               |Left Control, Shift and Alt                           |
 |`KC_HYPR` |                               |Left Control, Shift, Alt and GUI                      |
 ## Mod-Tap Keys :id=mod-tap-keys
 See also: [Mod-Tap](mod_tap.md)
-|Key          |Aliases                                                          |Description                                            |
+|Key          |Aliases                                                          |Description                                                   |
-|-------------|-----------------------------------------------------------------|-------------------------------------------------------|
+|-------------|-----------------------------------------------------------------|--------------------------------------------------------------|
-|`MT(mod, kc)`|                                                                 |`mod` when held, `kc` when tapped                      |
+|`MT(mod, kc)`|                                                                 |`mod` when held, `kc` when tapped                             |
-|`LCTL_T(kc)` |`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
+|`LCTL_T(kc)` |`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped                      |
-|`LSFT_T(kc)` |`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
+|`LSFT_T(kc)` |`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                        |
-|`LALT_T(kc)` |`LOPT_T(kc)`, `ALT_T(kc)`, `OPT_T(kc)`                           |Left Alt when held, `kc` when tapped                   |
+|`LALT_T(kc)` |`LOPT_T(kc)`, `ALT_T(kc)`, `OPT_T(kc)`                           |Left Alt when held, `kc` when tapped                          |
-|`LGUI_T(kc)` |`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`LGUI_T(kc)` |`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                          |
-|`RCTL_T(kc)` |                                                                 |Right Control when held, `kc` when tapped              |
+|`RCTL_T(kc)` |                                                                 |Right Control when held, `kc` when tapped                     |
-|`RSFT_T(kc)` |                                                                 |Right Shift when held, `kc` when tapped                |
+|`RSFT_T(kc)` |                                                                 |Right Shift when held, `kc` when tapped                       |
-|`RALT_T(kc)` |`ROPT_T(kc)`, `ALGR_T(kc)`                                       |Right Alt when held, `kc` when tapped                  |
+|`RALT_T(kc)` |`ROPT_T(kc)`, `ALGR_T(kc)`                                       |Right Alt (AltGr) when held, `kc` when tapped                 |
-|`RGUI_T(kc)` |`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
+|`RGUI_T(kc)` |`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                         |
-|`SGUI_T(kc)` |`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
+|`SGUI_T(kc)` |`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped                |
-|`LCA_T(kc)`  |                                                                 |Left Control and Alt when held, `kc` when tapped       |
+|`LCA_T(kc)`  |                                                                 |Left Control and Alt when held, `kc` when tapped              |
-|`LCAG_T(kc)` |                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`LSA_T(kc)`  |                                                                 |Left Shift and Left Alt when held, `kc` when tapped           |
-|`RCAG_T(kc)` |                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
+|`RSA_T(kc)`  |`SAGR_T(kc)`                                                     |Right Shift and Right Alt (AltGr) when held, `kc` when tapped |
-|`C_S_T(kc)`  |                                                                 |Left Control and Shift when held, `kc` when tapped     |
+|`RCS_T(kc)`  |                                                                 |Right Control and Right Shift when held, `kc` when tapped     |
-|`MEH_T(kc)`  |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
+|`LCAG_T(kc)` |                                                                 |Left Control, Alt and GUI when held, `kc` when tapped         |
 |`RCAG_T(kc)` |                                                                 |Right Control, Alt and GUI when held, `kc` when tapped        |
 |`C_S_T(kc)`  |                                                                 |Left Control and Shift when held, `kc` when tapped            |
 |`MEH_T(kc)`  |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped       |
 |`HYPR_T(kc)` |`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 ## RGB Lighting :id=rgb-lighting
@@ -9,6 +9,6 @@ Hardware Availability: Custom keyboard group buys
 Make example for this keyboard (after setting up your build environment):
-    make aeboards/ext65:default
+    make aeboards/ext65/rev1:default
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -0,0 +1,7 @@
 /* Address for jumping to bootloader on STM32 chips. */
 /* It is chip dependent, the correct number can be looked up here (page 175):
 * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
 * This also requires a patch to chibios:
 *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
 */
 #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
@@ -0,0 +1,714 @@
 /*
    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
        http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
 */
 /**
 * @file    rt/templates/chconf.h
 * @brief   Configuration file template.
 * @details A copy of this file must be placed in each project directory, it
 *          contains the application specific kernel settings.
 *
 * @addtogroup config
 * @details Kernel related settings and hooks.
 * @{
 */
 #ifndef CHCONF_H
 #define CHCONF_H
 #define _CHIBIOS_RT_CONF_
 #define _CHIBIOS_RT_CONF_VER_6_0_
 /*===========================================================================*/
 /**
 * @name System timers settings
 * @{
 */
 /*===========================================================================*/
 /**
 * @brief   System time counter resolution.
 * @note    Allowed values are 16 or 32 bits.
 */
 #if !defined(CH_CFG_ST_RESOLUTION)
 #define CH_CFG_ST_RESOLUTION                32
 #endif
 /**
 * @brief   System tick frequency.
 * @details Frequency of the system timer that drives the system ticks. This
 *          setting also defines the system tick time unit.
 */
 #if !defined(CH_CFG_ST_FREQUENCY)
 #define CH_CFG_ST_FREQUENCY                 10000
 #endif
 /**
 * @brief   Time intervals data size.
 * @note    Allowed values are 16, 32 or 64 bits.
 */
 #if !defined(CH_CFG_INTERVALS_SIZE)
 #define CH_CFG_INTERVALS_SIZE               32
 #endif
 /**
 * @brief   Time types data size.
 * @note    Allowed values are 16 or 32 bits.
 */
 #if !defined(CH_CFG_TIME_TYPES_SIZE)
 #define CH_CFG_TIME_TYPES_SIZE              32
 #endif
 /**
 * @brief   Time delta constant for the tick-less mode.
 * @note    If this value is zero then the system uses the classic
 *          periodic tick. This value represents the minimum number
 *          of ticks that is safe to specify in a timeout directive.
 *          The value one is not valid, timeouts are rounded up to
 *          this value.
 */
 #if !defined(CH_CFG_ST_TIMEDELTA)
 #define CH_CFG_ST_TIMEDELTA                 2
 #endif
 /** @} */
 /*===========================================================================*/
 /**
 * @name Kernel parameters and options
 * @{
 */
 /*===========================================================================*/
 /**
 * @brief   Round robin interval.
 * @details This constant is the number of system ticks allowed for the
 *          threads before preemption occurs. Setting this value to zero
 *          disables the preemption for threads with equal priority and the
 *          round robin becomes cooperative. Note that higher priority
 *          threads can still preempt, the kernel is always preemptive.
 * @note    Disabling the round robin preemption makes the kernel more compact
 *          and generally faster.
 * @note    The round robin preemption is not supported in tickless mode and
 *          must be set to zero in that case.
 */
 #if !defined(CH_CFG_TIME_QUANTUM)
 #define CH_CFG_TIME_QUANTUM                 0
 #endif
 /**
 * @brief   Managed RAM size.
 * @details Size of the RAM area to be managed by the OS. If set to zero
 *          then the whole available RAM is used. The core memory is made
 *          available to the heap allocator and/or can be used directly through
 *          the simplified core memory allocator.
 *
 * @note    In order to let the OS manage the whole RAM the linker script must
 *          provide the @p __heap_base__ and @p __heap_end__ symbols.
 * @note    Requires @p CH_CFG_USE_MEMCORE.
 */
 #if !defined(CH_CFG_MEMCORE_SIZE)
 #define CH_CFG_MEMCORE_SIZE                 0
 #endif
 /**
 * @brief   Idle thread automatic spawn suppression.
 * @details When this option is activated the function @p chSysInit()
 *          does not spawn the idle thread. The application @p main()
 *          function becomes the idle thread and must implement an
 *          infinite loop.
 */
 #if !defined(CH_CFG_NO_IDLE_THREAD)
 #define CH_CFG_NO_IDLE_THREAD               FALSE
 #endif
 /** @} */
 /*===========================================================================*/
 /**
 * @name Performance options
 * @{
 */
 /*===========================================================================*/
 /**
 * @brief   OS optimization.
 * @details If enabled then time efficient rather than space efficient code
 *          is used when two possible implementations exist.
 *
 * @note    This is not related to the compiler optimization options.
 * @note    The default is @p TRUE.
 */
 #if !defined(CH_CFG_OPTIMIZE_SPEED)
 #define CH_CFG_OPTIMIZE_SPEED               FALSE
 #endif
 /** @} */
 /*===========================================================================*/
 /**
 * @name Subsystem options
 * @{
 */
 /*===========================================================================*/
 /**
 * @brief   Time Measurement APIs.
 * @details If enabled then the time measurement APIs are included in
 *          the kernel.
 *
 * @note    The default is @p TRUE.
 */
 #if !defined(CH_CFG_USE_TM)
 #define CH_CFG_USE_TM                       FALSE
 #endif
 /**
 * @brief   Threads registry APIs.
 * @details If enabled then the registry APIs are included in the kernel.
 *
 * @note    The default is @p TRUE.
 */
 #if !defined(CH_CFG_USE_REGISTRY)
 #define CH_CFG_USE_REGISTRY                 TRUE
 #endif
 /**
 * @brief   Threads synchronization APIs.
 * @details If enabled then the @p chThdWait() function is included in
 *          the kernel.
 *
 * @note    The default is @p TRUE.
 */
 #if !defined(CH_CFG_USE_WAITEXIT)
 #define CH_CFG_USE_WAITEXIT                 TRUE
 #endif
 /**
 * @brief   Semaphores APIs.
 * @details If enabled then the Semaphores APIs are included in the kernel.
 *
 * @note    The default is @p TRUE.
 */
 #if !defined(CH_CFG_USE_SEMAPHORES)
 #define CH_CFG_USE_SEMAPHORES               TRUE
 #endif
 /**
 * @brief   Semaphores queuing mode.
 * @details If enabled then the threads are enqueued on semaphores by
 *          priority rather than in FIFO order.
 *
 * @note    The default is @p FALSE. Enable this if you have special
 *          requirements.
 * @note    Requires @p CH_CFG_USE_SEMAPHORES.
 */
 #if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
 #define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
 #endif
 /**
 * @brief   Mutexes APIs.
 * @details If enabled then the mutexes APIs are included in the kernel.
 *
 * @note    The default is @p TRUE.
 */
 #if !defined(CH_CFG_USE_MUTEXES)
 #define CH_CFG_USE_MUTEXES                  TRUE
 #endif
 /**
 * @brief   Enables recursive behavior on mutexes.
 * @note    Recursive mutexes are heavier and have an increased
 *          memory footprint.
 *
 * @note    The default is @p FALSE.
 * @note    Requires @p CH_CFG_USE_MUTEXES.
 */
 #if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
 #define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
 #endif
 /**
 * @brief   Conditional Variables APIs.
 * @details If enabled then the conditional variables APIs are included
 *          in the kernel.
 *
 * @note    The default is @p TRUE.
 * @note    Requires @p CH_CFG_USE_MUTEXES.
 */
 #if !defined(CH_CFG_USE_CONDVARS)
 #define CH_CFG_USE_CONDVARS                 TRUE
 #endif
 /**
 * @brief   Conditional Variables APIs with timeout.
 * @details If enabled then the conditional variables APIs with timeout
 *          specification are included in the kernel.
 *
 * @note    The default is @p TRUE.
 * @note    Requires @p CH_CFG_USE_CONDVARS.
 */
 #if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
 #define CH_CFG_USE_CONDVARS_TIMEOUT         FALSE
 #endif
 /**
 * @brief   Events Flags APIs.
 * @details If enabled then the event flags APIs are included in the kernel.
 *
 * @note    The default is @p TRUE.
 */
 #if !defined(CH_CFG_USE_EVENTS)
 #define CH_CFG_USE_EVENTS                   TRUE
 #endif
 /**
 * @brief   Events Flags APIs with timeout.
 * @details If enabled then the events APIs with timeout specification
 *          are included in the kernel.
 *
 * @note    The default is @p TRUE.
 * @note    Requires @p CH_CFG_USE_EVENTS.
 */
 #if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
 #define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
 #endif
 /**
 * @brief   Synchronous Messages APIs.
 * @details If enabled then the synchronous messages APIs are included
 *          in the kernel.
 *
 * @note    The default is @p TRUE.
 */
 #if !defined(CH_CFG_USE_MESSAGES)
 #define CH_CFG_USE_MESSAGES                 TRUE
 #endif
 /**
 * @brief   Synchronous Messages queuing mode.
 * @details If enabled then messages are served by priority rather than in
 *          FIFO order.
 *
 * @note    The default is @p FALSE. Enable this if you have special
 *          requirements.
 * @note    Requires @p CH_CFG_USE_MESSAGES.
 */
 #if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
 #define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
 #endif
 /**
 * @brief   Mailboxes APIs.
 * @details If enabled then the asynchronous messages (mailboxes) APIs are
 *          included in the kernel.
 *
 * @note    The default is @p TRUE.
 * @note    Requires @p CH_CFG_USE_SEMAPHORES.
 */
 #if !defined(CH_CFG_USE_MAILBOXES)
 #define CH_CFG_USE_MAILBOXES                TRUE
 #endif
 /**
 * @brief   Core Memory Manager APIs.
 * @details If enabled then the core memory manager APIs are included
 *          in the kernel.
 *
 * @note    The default is @p TRUE.
 */
 #if !defined(CH_CFG_USE_MEMCORE)
 #define CH_CFG_USE_MEMCORE                  FALSE
 #endif
 /**
 * @brief   Heap Allocator APIs.
 * @details If enabled then the memory heap allocator APIs are included
 *          in the kernel.
 *
 * @note    The default is @p TRUE.
 * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
 *          @p CH_CFG_USE_SEMAPHORES.
 * @note    Mutexes are recommended.
 */
 #if !defined(CH_CFG_USE_HEAP)
 #define CH_CFG_USE_HEAP                     FALSE
 #endif
 /**
 * @brief   Memory Pools Allocator APIs.
 * @details If enabled then the memory pools allocator APIs are included
 *          in the kernel.
 *
 * @note    The default is @p TRUE.
 */
 #if !defined(CH_CFG_USE_MEMPOOLS)
 #define CH_CFG_USE_MEMPOOLS                 FALSE
 #endif
 /**
 * @brief   Objects FIFOs APIs.
 * @details If enabled then the objects FIFOs APIs are included
 *          in the kernel.
 *
 * @note    The default is @p TRUE.
 */
 #if !defined(CH_CFG_USE_OBJ_FIFOS)
 #define CH_CFG_USE_OBJ_FIFOS                FALSE
 #endif
 /**
 * @brief   Pipes APIs.
 * @details If enabled then the pipes APIs are included
 *          in the kernel.
 *
 * @note    The default is @p TRUE.
 */
 #if !defined(CH_CFG_USE_PIPES)
 #define CH_CFG_USE_PIPES                    FALSE
 #endif
 /**
 * @brief   Dynamic Threads APIs.
 * @details If enabled then the dynamic threads creation APIs are included
 *          in the kernel.
 *
 * @note    The default is @p TRUE.
 * @note    Requires @p CH_CFG_USE_WAITEXIT.
 * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
 */
 #if !defined(CH_CFG_USE_DYNAMIC)
 #define CH_CFG_USE_DYNAMIC                  FALSE
 #endif
 /** @} */
 /*===========================================================================*/
 /**
 * @name Objects factory options
 * @{
 */
 /*===========================================================================*/
 /**
 * @brief   Objects Factory APIs.
 * @details If enabled then the objects factory APIs are included in the
 *          kernel.
 *
 * @note    The default is @p FALSE.
 */
 #if !defined(CH_CFG_USE_FACTORY)
 #define CH_CFG_USE_FACTORY                  FALSE
 #endif
 /**
 * @brief   Maximum length for object names.
 * @details If the specified length is zero then the name is stored by
 *          pointer but this could have unintended side effects.
 */
 #if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
 #define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
 #endif
 /**
 * @brief   Enables the registry of generic objects.
 */
 #if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
 #define CH_CFG_FACTORY_OBJECTS_REGISTRY     FALSE
 #endif
 /**
 * @brief   Enables factory for generic buffers.
 */
 #if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
 #define CH_CFG_FACTORY_GENERIC_BUFFERS      FALSE
 #endif
 /**
 * @brief   Enables factory for semaphores.
 */
 #if !defined(CH_CFG_FACTORY_SEMAPHORES)
 #define CH_CFG_FACTORY_SEMAPHORES           FALSE
 #endif
 /**
 * @brief   Enables factory for mailboxes.
 */
 #if !defined(CH_CFG_FACTORY_MAILBOXES)
 #define CH_CFG_FACTORY_MAILBOXES            FALSE
 #endif
 /**
 * @brief   Enables factory for objects FIFOs.
 */
 #if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
 #define CH_CFG_FACTORY_OBJ_FIFOS            FALSE
 #endif
 /**
 * @brief   Enables factory for Pipes.
 */
 #if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
 #define CH_CFG_FACTORY_PIPES                FALSE
 #endif
 /** @} */
 /*===========================================================================*/
 /**
 * @name Debug options
 * @{
 */
 /*===========================================================================*/
 /**
 * @brief   Debug option, kernel statistics.
 *
 * @note    The default is @p FALSE.
 */
 #if !defined(CH_DBG_STATISTICS)
 #define CH_DBG_STATISTICS                   FALSE
 #endif
 /**
 * @brief   Debug option, system state check.
 * @details If enabled the correct call protocol for system APIs is checked
 *          at runtime.
 *
 * @note    The default is @p FALSE.
 */
 #if !defined(CH_DBG_SYSTEM_STATE_CHECK)
 #define CH_DBG_SYSTEM_STATE_CHECK           FALSE
 #endif
 /**
 * @brief   Debug option, parameters checks.
 * @details If enabled then the checks on the API functions input
 *          parameters are activated.
 *
 * @note    The default is @p FALSE.
 */
 #if !defined(CH_DBG_ENABLE_CHECKS)
 #define CH_DBG_ENABLE_CHECKS                FALSE
 #endif
 /**
 * @brief   Debug option, consistency checks.
 * @details If enabled then all the assertions in the kernel code are
 *          activated. This includes consistency checks inside the kernel,
 *          runtime anomalies and port-defined checks.
 *
 * @note    The default is @p FALSE.
 */
 #if !defined(CH_DBG_ENABLE_ASSERTS)
 #define CH_DBG_ENABLE_ASSERTS               FALSE
 #endif
 /**
 * @brief   Debug option, trace buffer.
 * @details If enabled then the trace buffer is activated.
 *
 * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
 */
 #if !defined(CH_DBG_TRACE_MASK)
 #define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
 #endif
 /**
 * @brief   Trace buffer entries.
 * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
 *          different from @p CH_DBG_TRACE_MASK_DISABLED.
 */
 #if !defined(CH_DBG_TRACE_BUFFER_SIZE)
 #define CH_DBG_TRACE_BUFFER_SIZE            128
 #endif
 /**
 * @brief   Debug option, stack checks.
 * @details If enabled then a runtime stack check is performed.
 *
 * @note    The default is @p FALSE.
 * @note    The stack check is performed in a architecture/port dependent way.
 *          It may not be implemented or some ports.
 * @note    The default failure mode is to halt the system with the global
 *          @p panic_msg variable set to @p NULL.
 */
 #if !defined(CH_DBG_ENABLE_STACK_CHECK)
 #define CH_DBG_ENABLE_STACK_CHECK           FALSE
 #endif
 /**
 * @brief   Debug option, stacks initialization.
 * @details If enabled then the threads working area is filled with a byte
 *          value when a thread is created. This can be useful for the
 *          runtime measurement of the used stack.
 *
 * @note    The default is @p FALSE.
 */
 #if !defined(CH_DBG_FILL_THREADS)
 #define CH_DBG_FILL_THREADS                 FALSE
 #endif
 /**
 * @brief   Debug option, threads profiling.
 * @details If enabled then a field is added to the @p thread_t structure that
 *          counts the system ticks occurred while executing the thread.
 *
 * @note    The default is @p FALSE.
 * @note    This debug option is not currently compatible with the
 *          tickless mode.
 */
 #if !defined(CH_DBG_THREADS_PROFILING)
 #define CH_DBG_THREADS_PROFILING            FALSE
 #endif
 /** @} */
 /*===========================================================================*/
 /**
 * @name Kernel hooks
 * @{
 */
 /*===========================================================================*/
 /**
 * @brief   System structure extension.
 * @details User fields added to the end of the @p ch_system_t structure.
 */
 #define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
  /* Add threads custom fields here.*/
 /**
 * @brief   System initialization hook.
 * @details User initialization code added to the @p chSysInit() function
 *          just before interrupts are enabled globally.
 */
 #define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
  /* Add threads initialization code here.*/                                \
 }
 /**
 * @brief   Threads descriptor structure extension.
 * @details User fields added to the end of the @p thread_t structure.
 */
 #define CH_CFG_THREAD_EXTRA_FIELDS                                          \
  /* Add threads custom fields here.*/
 /**
 * @brief   Threads initialization hook.
 * @details User initialization code added to the @p _thread_init() function.
 *
 * @note    It is invoked from within @p _thread_init() and implicitly from all
 *          the threads creation APIs.
 */
 #define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
  /* Add threads initialization code here.*/                                \
 }
 /**
 * @brief   Threads finalization hook.
 * @details User finalization code added to the @p chThdExit() API.
 */
 #define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
  /* Add threads finalization code here.*/                                  \
 }
 /**
 * @brief   Context switch hook.
 * @details This hook is invoked just before switching between threads.
 */
 #define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
  /* Context switch code here.*/                                            \
 }
 /**
 * @brief   ISR enter hook.
 */
 #define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
  /* IRQ prologue code here.*/                                              \
 }
 /**
 * @brief   ISR exit hook.
 */
 #define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
  /* IRQ epilogue code here.*/                                              \
 }
 /**
 * @brief   Idle thread enter hook.
 * @note    This hook is invoked within a critical zone, no OS functions
 *          should be invoked from here.
 * @note    This macro can be used to activate a power saving mode.
 */
 #define CH_CFG_IDLE_ENTER_HOOK() {                                          \
  /* Idle-enter code here.*/                                                \
 }
 /**
 * @brief   Idle thread leave hook.
 * @note    This hook is invoked within a critical zone, no OS functions
 *          should be invoked from here.
 * @note    This macro can be used to deactivate a power saving mode.
 */
 #define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
  /* Idle-leave code here.*/                                                \
 }
 /**
 * @brief   Idle Loop hook.
 * @details This hook is continuously invoked by the idle thread loop.
 */
 #define CH_CFG_IDLE_LOOP_HOOK() {                                           \
  /* Idle loop code here.*/                                                 \
 }
 /**
 * @brief   System tick event hook.
 * @details This hook is invoked in the system tick handler immediately
 *          after processing the virtual timers queue.
 */
 #define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
  /* System tick event code here.*/                                         \
 }
 /**
 * @brief   System halt hook.
 * @details This hook is invoked in case to a system halting error before
 *          the system is halted.
 */
 #define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
  /* System halt code here.*/                                               \
 }
 /**
 * @brief   Trace hook.
 * @details This hook is invoked each time a new record is written in the
 *          trace buffer.
 */
 #define CH_CFG_TRACE_HOOK(tep) {                                            \
  /* Trace code here.*/                                                     \
 }
 /** @} */
 /*===========================================================================*/
 /* Port-specific settings (override port settings defaulted in chcore.h).    */
 /*===========================================================================*/
 #endif  /* CHCONF_H */
 /** @} */
@@ -0,0 +1,77 @@
 /*
 Copyright 2015 Jun Wako <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0x4145 // "AE"
 #define PRODUCT_ID      0xA652 // AEboards EXT65 Rev2
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    AEboards
 #define PRODUCT         AEBoards Ext65 Rev2
 /* key matrix size */
 /* key matrix size */
 #define MATRIX_ROWS 10
 #define MATRIX_COLS 10
 /* key matrix pins */
 #define MATRIX_ROW_PINS { A10, A9, A8, B7, A2, A1, B12, B11, B10, B2 }
 #define MATRIX_COL_PINS { B14, B6, A0, B1, B0, A7, A6, A5, A4, A3 }
 #define DIODE_DIRECTION COL2ROW
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    5
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 //RGB Underglow WS2812
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 24
 #define RGB_DI_PIN B15
 //SPI
 #define WS2812_SPI SPID2
 #define WS2812_SPI_MOSI_PAL_MODE 0
 #define WS2812_EXTERNAL_PULLUP
 // I2C OLED defines
 #define I2C1_SCL 8
 #define I2C1_SDA 9
 #define I2C1_SCL_PAL_MODE 1
 #define I2C1_SDA_PAL_MODE 1
 #define I2C1_TIMINGR_PRESC 	0U
 #define I2C1_TIMINGR_SCLDEL 3U
 #define I2C1_TIMINGR_SDADEL 1U
 #define I2C1_TIMINGR_SCLH 	3U
 #define I2C1_TIMINGR_SCLL   9U
 // LED defines
 #define BACKLIGHT_PIN           B5
 #define BACKLIGHT_PWM_DRIVER    PWMD3
 #define BACKLIGHT_PWM_CHANNEL   2
 #define BACKLIGHT_PAL_MODE      1
 #define BACKLIGHT_LEVELS 6
 #define BACKLIGHT_BREATHING
 #define BREATHING_PERIOD 6
@@ -0,0 +1,525 @@
 /*
    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
        http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
 */
 /**
 * @file    templates/halconf.h
 * @brief   HAL configuration header.
 * @details HAL configuration file, this file allows to enable or disable the
 *          various device drivers from your application. You may also use
 *          this file in order to override the device drivers default settings.
 *
 * @addtogroup HAL_CONF
 * @{
 */
 #ifndef HALCONF_H
 #define HALCONF_H
 #define _CHIBIOS_HAL_CONF_
 #define _CHIBIOS_HAL_CONF_VER_7_0_
 #include "mcuconf.h"
 /**
 * @brief   Enables the PAL subsystem.
 */
 #if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
 #define HAL_USE_PAL                         TRUE
 #endif
 /**
 * @brief   Enables the ADC subsystem.
 */
 #if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
 #define HAL_USE_ADC                         FALSE
 #endif
 /**
 * @brief   Enables the CAN subsystem.
 */
 #if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
 #define HAL_USE_CAN                         FALSE
 #endif
 /**
 * @brief   Enables the cryptographic subsystem.
 */
 #if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
 #define HAL_USE_CRY                         FALSE
 #endif
 /**
 * @brief   Enables the DAC subsystem.
 */
 #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
 #define HAL_USE_DAC                         FALSE
 #endif
 /**
 * @brief   Enables the GPT subsystem.
 */
 #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
 #define HAL_USE_GPT                         FALSE
 #endif
 /**
 * @brief   Enables the I2C subsystem.
 */
 #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
 #define HAL_USE_I2C                         TRUE
 #endif
 /**
 * @brief   Enables the I2S subsystem.
 */
 #if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
 #define HAL_USE_I2S                         FALSE
 #endif
 /**
 * @brief   Enables the ICU subsystem.
 */
 #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
 #define HAL_USE_ICU                         FALSE
 #endif
 /**
 * @brief   Enables the MAC subsystem.
 */
 #if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
 #define HAL_USE_MAC                         FALSE
 #endif
 /**
 * @brief   Enables the MMC_SPI subsystem.
 */
 #if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
 #define HAL_USE_MMC_SPI                     FALSE
 #endif
 /**
 * @brief   Enables the PWM subsystem.
 */
 #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
 #define HAL_USE_PWM                         TRUE
 #endif
 /**
 * @brief   Enables the RTC subsystem.
 */
 #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
 #define HAL_USE_RTC                         FALSE
 #endif
 /**
 * @brief   Enables the SDC subsystem.
 */
 #if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
 #define HAL_USE_SDC                         FALSE
 #endif
 /**
 * @brief   Enables the SERIAL subsystem.
 */
 #if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
 #define HAL_USE_SERIAL                      FALSE
 #endif
 /**
 * @brief   Enables the SERIAL over USB subsystem.
 */
 #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
 #define HAL_USE_SERIAL_USB                  FALSE
 #endif
 /**
 * @brief   Enables the SIO subsystem.
 */
 #if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
 #define HAL_USE_SIO                         FALSE
 #endif
 /**
 * @brief   Enables the SPI subsystem.
 */
 #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
 #define HAL_USE_SPI                         TRUE
 #endif
 /**
 * @brief   Enables the TRNG subsystem.
 */
 #if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
 #define HAL_USE_TRNG                        FALSE
 #endif
 /**
 * @brief   Enables the UART subsystem.
 */
 #if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
 #define HAL_USE_UART                        FALSE
 #endif
 /**
 * @brief   Enables the USB subsystem.
 */
 #if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
 #define HAL_USE_USB                         TRUE
 #endif
 /**
 * @brief   Enables the WDG subsystem.
 */
 #if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
 #define HAL_USE_WDG                         FALSE
 #endif
 /**
 * @brief   Enables the WSPI subsystem.
 */
 #if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
 #define HAL_USE_WSPI                        FALSE
 #endif
 /*===========================================================================*/
 /* PAL driver related settings.                                              */
 /*===========================================================================*/
 /**
 * @brief   Enables synchronous APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
 #define PAL_USE_CALLBACKS                   FALSE
 #endif
 /**
 * @brief   Enables synchronous APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
 #define PAL_USE_WAIT                        FALSE
 #endif
 /*===========================================================================*/
 /* ADC driver related settings.                                              */
 /*===========================================================================*/
 /**
 * @brief   Enables synchronous APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
 #define ADC_USE_WAIT                        TRUE
 #endif
 /**
 * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 #define ADC_USE_MUTUAL_EXCLUSION            TRUE
 #endif
 /*===========================================================================*/
 /* CAN driver related settings.                                              */
 /*===========================================================================*/
 /**
 * @brief   Sleep mode related APIs inclusion switch.
 */
 #if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
 #define CAN_USE_SLEEP_MODE                  TRUE
 #endif
 /**
 * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
 */
 #if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
 #define CAN_ENFORCE_USE_CALLBACKS           FALSE
 #endif
 /*===========================================================================*/
 /* CRY driver related settings.                                              */
 /*===========================================================================*/
 /**
 * @brief   Enables the SW fall-back of the cryptographic driver.
 * @details When enabled, this option, activates a fall-back software
 *          implementation for algorithms not supported by the underlying
 *          hardware.
 * @note    Fall-back implementations may not be present for all algorithms.
 */
 #if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
 #define HAL_CRY_USE_FALLBACK                FALSE
 #endif
 /**
 * @brief   Makes the driver forcibly use the fall-back implementations.
 */
 #if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
 #define HAL_CRY_ENFORCE_FALLBACK            FALSE
 #endif
 /*===========================================================================*/
 /* DAC driver related settings.                                              */
 /*===========================================================================*/
 /**
 * @brief   Enables synchronous APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
 #define DAC_USE_WAIT                        TRUE
 #endif
 /**
 * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 #define DAC_USE_MUTUAL_EXCLUSION            TRUE
 #endif
 /*===========================================================================*/
 /* I2C driver related settings.                                              */
 /*===========================================================================*/
 /**
 * @brief   Enables the mutual exclusion APIs on the I2C bus.
 */
 #if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 #define I2C_USE_MUTUAL_EXCLUSION            TRUE
 #endif
 /*===========================================================================*/
 /* MAC driver related settings.                                              */
 /*===========================================================================*/
 /**
 * @brief   Enables the zero-copy API.
 */
 #if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
 #define MAC_USE_ZERO_COPY                   FALSE
 #endif
 /**
 * @brief   Enables an event sources for incoming packets.
 */
 #if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
 #define MAC_USE_EVENTS                      TRUE
 #endif
 /*===========================================================================*/
 /* MMC_SPI driver related settings.                                          */
 /*===========================================================================*/
 /**
 * @brief   Delays insertions.
 * @details If enabled this options inserts delays into the MMC waiting
 *          routines releasing some extra CPU time for the threads with
 *          lower priority, this may slow down the driver a bit however.
 *          This option is recommended also if the SPI driver does not
 *          use a DMA channel and heavily loads the CPU.
 */
 #if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
 #define MMC_NICE_WAITING                    TRUE
 #endif
 /*===========================================================================*/
 /* SDC driver related settings.                                              */
 /*===========================================================================*/
 /**
 * @brief   Number of initialization attempts before rejecting the card.
 * @note    Attempts are performed at 10mS intervals.
 */
 #if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
 #define SDC_INIT_RETRY                      100
 #endif
 /**
 * @brief   Include support for MMC cards.
 * @note    MMC support is not yet implemented so this option must be kept
 *          at @p FALSE.
 */
 #if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
 #define SDC_MMC_SUPPORT                     FALSE
 #endif
 /**
 * @brief   Delays insertions.
 * @details If enabled this options inserts delays into the MMC waiting
 *          routines releasing some extra CPU time for the threads with
 *          lower priority, this may slow down the driver a bit however.
 */
 #if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
 #define SDC_NICE_WAITING                    TRUE
 #endif
 /**
 * @brief   OCR initialization constant for V20 cards.
 */
 #if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
 #define SDC_INIT_OCR_V20                    0x50FF8000U
 #endif
 /**
 * @brief   OCR initialization constant for non-V20 cards.
 */
 #if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
 #define SDC_INIT_OCR                        0x80100000U
 #endif
 /*===========================================================================*/
 /* SERIAL driver related settings.                                           */
 /*===========================================================================*/
 /**
 * @brief   Default bit rate.
 * @details Configuration parameter, this is the baud rate selected for the
 *          default configuration.
 */
 #if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
 #define SERIAL_DEFAULT_BITRATE              38400
 #endif
 /**
 * @brief   Serial buffers size.
 * @details Configuration parameter, you can change the depth of the queue
 *          buffers depending on the requirements of your application.
 * @note    The default is 16 bytes for both the transmission and receive
 *          buffers.
 */
 #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
 #define SERIAL_BUFFERS_SIZE                 16
 #endif
 /*===========================================================================*/
 /* SERIAL_USB driver related setting.                                        */
 /*===========================================================================*/
 /**
 * @brief   Serial over USB buffers size.
 * @details Configuration parameter, the buffer size must be a multiple of
 *          the USB data endpoint maximum packet size.
 * @note    The default is 256 bytes for both the transmission and receive
 *          buffers.
 */
 #if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
 #define SERIAL_USB_BUFFERS_SIZE             1
 #endif
 /**
 * @brief   Serial over USB number of buffers.
 * @note    The default is 2 buffers.
 */
 #if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
 #define SERIAL_USB_BUFFERS_NUMBER           2
 #endif
 /*===========================================================================*/
 /* SPI driver related settings.                                              */
 /*===========================================================================*/
 /**
 * @brief   Enables synchronous APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
 #define SPI_USE_WAIT                        TRUE
 #endif
 /**
 * @brief   Enables circular transfers APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
 #define SPI_USE_CIRCULAR                    FALSE
 #endif
 /**
 * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 #define SPI_USE_MUTUAL_EXCLUSION            TRUE
 #endif
 /**
 * @brief   Handling method for SPI CS line.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
 #define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
 #endif
 /*===========================================================================*/
 /* UART driver related settings.                                             */
 /*===========================================================================*/
 /**
 * @brief   Enables synchronous APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
 #define UART_USE_WAIT                       FALSE
 #endif
 /**
 * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 #define UART_USE_MUTUAL_EXCLUSION           FALSE
 #endif
 /*===========================================================================*/
 /* USB driver related settings.                                              */
 /*===========================================================================*/
 /**
 * @brief   Enables synchronous APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
 #define USB_USE_WAIT                        TRUE
 #endif
 /*===========================================================================*/
 /* WSPI driver related settings.                                             */
 /*===========================================================================*/
 /**
 * @brief   Enables synchronous APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
 #define WSPI_USE_WAIT                       TRUE
 #endif
 /**
 * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
 * @note    Disabling this option saves both code and data space.
 */
 #if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 #define WSPI_USE_MUTUAL_EXCLUSION           TRUE
 #endif
 #endif /* HALCONF_H */
 /** @} */
@@ -0,0 +1,98 @@
 /* Copyright 2018 Jason Williams (Wilba)
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  /* Keymap BASE: (Base Layer) Default Layer
   * ,-------------------.  ,-------------------------------------------------------------------.
   * |-   | *  | /  |NmLK|  |Esc| 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|pipe| ~  | Pscr|
   * |-------------------|  |-------------------------------------------------------------------|
   * |    | 9  | 8  | 7  |  |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| BSPC  | Del |
   * |  + |--------------|  |-------------------------------------------------------------------|
   * |    | 6  | 5  | 4  |  |Caps   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return   | Pgup|
   * |-------------------|  |-------------------------------------------------------------------|
   * |    | 3  | 2  | 1  |  |Shift    |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up | Pgdn|
   * | ENT|-------------------------------------------------------------------------------------|
   * |    | .  | 0       |  | Ctrl | Win | Alt |    Space        | FN | Ctrl |  |Left| Dn | Rght|
   * `------------------------------------------------------------------------------------------'
   */
  [0] = LAYOUT_ext65(
    RGB_M_T, BL_INC , BL_DEC , BL_TOGG, KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , KC_PSCR,
    RGB_TOG, KC_P9  , KC_P8  , KC_P7  , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL ,
    KC_PPLS, KC_P6  , KC_P5  , KC_P4  , KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,                   KC_PGUP,
    KC_PENT, KC_P3  , KC_P2  , KC_P1  , KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,                   KC_UP  , KC_PGDN,
    KC_PENT, KC_PDOT, KC_P0  , KC_P0  , KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                   MO(1)  , KC_RCTL,                   KC_LEFT, KC_DOWN, KC_RGHT
  ),
  [1] = LAYOUT_ext65(
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET  , KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
  ),
  [2] = LAYOUT_ext65(
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
  ),
  [3] = LAYOUT_ext65(
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
  )
 };
 #ifdef OLED_DRIVER_ENABLE
 void render_layer_state(void) {
    oled_write_ln(PSTR("LAYER"), false);
    oled_write_ln(PSTR("L1"), layer_state_is(1));
    oled_write_ln(PSTR("L2"), layer_state_is(2));
    oled_write_ln(PSTR("L3"), layer_state_is(3));
    oled_write_ln(PSTR(" "), false);
 }
 void render_keylock_status(led_t led_state) {
    oled_write_ln(PSTR("Lock:"), false);
    oled_write(PSTR("N"), led_state.num_lock);
    oled_write(PSTR("C"), led_state.caps_lock);
    oled_write_ln(PSTR("S"), led_state.scroll_lock);
    oled_write_ln(PSTR(" "), false);
 }
 void render_mod_status(uint8_t modifiers) {
    oled_write_ln(PSTR("Mods:"), false);
    oled_write(PSTR("S"), (modifiers & MOD_MASK_SHIFT));
    oled_write(PSTR("C"), (modifiers & MOD_MASK_CTRL));
    oled_write(PSTR("A"), (modifiers & MOD_MASK_ALT));
    oled_write_ln(PSTR("G"), (modifiers & MOD_MASK_GUI));
    oled_write_ln(PSTR(" "), false);
 }
 void oled_task_user(void) {
    render_layer_state();
    render_keylock_status(host_keyboard_led_state());
    render_mod_status(get_mods()|get_oneshot_mods());
 }
 #endif
@@ -0,0 +1,2 @@
 # The Default Ext65Rev2 Layout
@@ -0,0 +1,98 @@
 /* Copyright 2018 Jason Williams (Wilba)
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  /* Keymap BASE: (Base Layer) Default Layer
   * ,-------------------.  ,-------------------------------------------------------------------.
   * |-   | *  | /  |NmLK|  |Esc| 1 |  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|pipe| ~  | Pscr|
   * |-------------------|  |-------------------------------------------------------------------|
   * |    | 9  | 8  | 7  |  |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| BSPC  | Del |
   * |  + |--------------|  |-------------------------------------------------------------------|
   * |    | 6  | 5  | 4  |  |Caps   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return   | Pgup|
   * |-------------------|  |-------------------------------------------------------------------|
   * |    | 3  | 2  | 1  |  |Shift    |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up | Pgdn|
   * | ENT|-------------------------------------------------------------------------------------|
   * |    | .  | 0       |  | Ctrl | Win | Alt |    Space        | FN | Ctrl |  |Left| Dn | Rght|
   * `------------------------------------------------------------------------------------------'
   */
  [0] = LAYOUT_ext65(
    RGB_M_T, BL_INC , BL_DEC , BL_TOGG, KC_ESC , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , KC_PSCR,
    RGB_TOG, KC_P9  , KC_P8  , KC_P7  , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL ,
    KC_PPLS, KC_P6  , KC_P5  , KC_P4  , KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,                   KC_PGUP,
    KC_PENT, KC_P3  , KC_P2  , KC_P1  , KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,                   KC_UP  , KC_PGDN,
    KC_PENT, KC_PDOT, KC_P0  , KC_P0  , KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,                   MO(1)  , KC_RCTL,                   KC_LEFT, KC_DOWN, KC_RGHT
  ),
  [1] = LAYOUT_ext65(
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET  , KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
  ),
  [2] = LAYOUT_ext65(
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
  ),
  [3] = LAYOUT_ext65(
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS,
    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                   KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS
  )
 };
 #ifdef OLED_DRIVER_ENABLE
 void render_layer_state(void) {
    oled_write_ln(PSTR("LAYER"), false);
    oled_write_ln(PSTR("L1"), layer_state_is(1));
    oled_write_ln(PSTR("L2"), layer_state_is(2));
    oled_write_ln(PSTR("L3"), layer_state_is(3));
    oled_write_ln(PSTR(" "), false);
 }
 void render_keylock_status(led_t led_state) {
    oled_write_ln(PSTR("Lock:"), false);
    oled_write(PSTR("N"), led_state.num_lock);
    oled_write(PSTR("C"), led_state.caps_lock);
    oled_write_ln(PSTR("S"), led_state.scroll_lock);
    oled_write_ln(PSTR(" "), false);
 }
 void render_mod_status(uint8_t modifiers) {
    oled_write_ln(PSTR("Mods:"), false);
    oled_write(PSTR("S"), (modifiers & MOD_MASK_SHIFT));
    oled_write(PSTR("C"), (modifiers & MOD_MASK_CTRL));
    oled_write(PSTR("A"), (modifiers & MOD_MASK_ALT));
    oled_write_ln(PSTR("G"), (modifiers & MOD_MASK_GUI));
    oled_write_ln(PSTR(" "), false);
 }
 void oled_task_user(void) {
    render_layer_state();
    render_keylock_status(host_keyboard_led_state());
    render_mod_status(get_mods()|get_oneshot_mods());
 }
 #endif
@@ -0,0 +1,2 @@
 # The VIA Ext65Rev2 Layout
@@ -0,0 +1 @@
 VIA_ENABLE = yes
@@ -0,0 +1,176 @@
 /*
    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at
        http://www.apache.org/licenses/LICENSE-2.0
    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
 */
 #ifndef _MCUCONF_H_
 #define _MCUCONF_H_
 /*
 * STM32F0xx drivers configuration.
 * The following settings override the default settings present in
 * the various device driver implementation headers.
 * Note that the settings for each driver only have effect if the whole
 * driver is enabled in halconf.h.
 *
 * IRQ priorities:
 * 3...0       Lowest...Highest.
 *
 * DMA priorities:
 * 0...3        Lowest...Highest.
 */
 #define STM32F0xx_MCUCONF
 // #define STM32F070xB
 /*
 * HAL driver system settings.
 */
 #define STM32_NO_INIT                       FALSE
 #define STM32_PVD_ENABLE                    FALSE
 #define STM32_PLS                           STM32_PLS_LEV0
 #define STM32_HSI_ENABLED                   TRUE
 #define STM32_HSI14_ENABLED                 TRUE
 #define STM32_HSI48_ENABLED                 FALSE
 #define STM32_LSI_ENABLED                   TRUE
 #define STM32_HSE_ENABLED                   FALSE
 #define STM32_LSE_ENABLED                   FALSE
 #define STM32_SW                            STM32_SW_PLL
 #define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
 #define STM32_PREDIV_VALUE                  1
 #define STM32_PLLMUL_VALUE                  12
 #define STM32_HPRE                          STM32_HPRE_DIV1
 #define STM32_PPRE                          STM32_PPRE_DIV1
 #define STM32_ADCSW                         STM32_ADCSW_HSI14
 #define STM32_ADCPRE                        STM32_ADCPRE_DIV4
 #define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
 #define STM32_ADCPRE                        STM32_ADCPRE_DIV4
 #define STM32_ADCSW                         STM32_ADCSW_HSI14
 #define STM32_USBSW                         STM32_USBSW_HSI48
 #define STM32_CECSW                         STM32_CECSW_HSI
 #define STM32_I2C1SW                        STM32_I2C1SW_HSI
 #define STM32_USART1SW                      STM32_USART1SW_PCLK
 #define STM32_RTCSEL                        STM32_RTCSEL_LSI
 /*
 * ADC driver system settings.
 */
 #define STM32_ADC_USE_ADC1                  FALSE
 #define STM32_ADC_ADC1_DMA_PRIORITY         2
 #define STM32_ADC_IRQ_PRIORITY              2
 #define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
 /*
 * EXT driver system settings.
 */
 #define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
 #define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
 #define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
 #define STM32_EXT_EXTI16_IRQ_PRIORITY       3
 #define STM32_EXT_EXTI17_IRQ_PRIORITY       3
 /*
 * GPT driver system settings.
 */
 #define STM32_GPT_USE_TIM1                  FALSE
 #define STM32_GPT_USE_TIM2                  FALSE
 #define STM32_GPT_USE_TIM3                  FALSE
 #define STM32_GPT_USE_TIM14                 FALSE
 #define STM32_GPT_TIM1_IRQ_PRIORITY         2
 #define STM32_GPT_TIM2_IRQ_PRIORITY         2
 #define STM32_GPT_TIM3_IRQ_PRIORITY         2
 #define STM32_GPT_TIM14_IRQ_PRIORITY        2
 /*
 * I2C driver system settings.
 */
 #define STM32_I2C_USE_I2C1                  TRUE
 #define STM32_I2C_USE_I2C2                  FALSE
 #define STM32_I2C_BUSY_TIMEOUT              50
 #define STM32_I2C_I2C1_IRQ_PRIORITY         3
 #define STM32_I2C_I2C2_IRQ_PRIORITY         3
 #define STM32_I2C_USE_DMA                   TRUE
 #define STM32_I2C_I2C1_DMA_PRIORITY         1
 #define STM32_I2C_I2C2_DMA_PRIORITY         1
 #define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
 #define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
 #define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
 /*
 * ICU driver system settings.
 */
 #define STM32_ICU_USE_TIM1                  FALSE
 #define STM32_ICU_USE_TIM2                  FALSE
 #define STM32_ICU_USE_TIM3                  FALSE
 #define STM32_ICU_TIM1_IRQ_PRIORITY         3
 #define STM32_ICU_TIM2_IRQ_PRIORITY         3
 #define STM32_ICU_TIM3_IRQ_PRIORITY         3
 /*
 * PWM driver system settings.
 */
 #define STM32_PWM_USE_ADVANCED              FALSE
 #define STM32_PWM_USE_TIM1                  FALSE
 #define STM32_PWM_USE_TIM2                  FALSE
 #define STM32_PWM_USE_TIM3                  TRUE
 #define STM32_PWM_TIM1_IRQ_PRIORITY         3
 #define STM32_PWM_TIM2_IRQ_PRIORITY         3
 #define STM32_PWM_TIM3_IRQ_PRIORITY         3
 /*
 * SERIAL driver system settings.
 */
 #define STM32_SERIAL_USE_USART1             FALSE
 #define STM32_SERIAL_USE_USART2             FALSE
 #define STM32_SERIAL_USART1_PRIORITY        3
 #define STM32_SERIAL_USART2_PRIORITY        3
 /*
 * SPI driver system settings.
 */
 #define STM32_SPI_USE_SPI1                  FALSE
 #define STM32_SPI_USE_SPI2                  TRUE
 #define STM32_SPI_SPI1_DMA_PRIORITY         1
 #define STM32_SPI_SPI2_DMA_PRIORITY         1
 #define STM32_SPI_SPI1_IRQ_PRIORITY         2
 #define STM32_SPI_SPI2_IRQ_PRIORITY         2
 #define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
 #define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
 #define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
 /*
 * ST driver system settings.
 */
 #define STM32_ST_IRQ_PRIORITY               2
 #define STM32_ST_USE_TIMER                  2
 /*
 * UART driver system settings.
 */
 #define STM32_UART_USE_USART1               FALSE
 #define STM32_UART_USE_USART2               FALSE
 #define STM32_UART_USART1_IRQ_PRIORITY      3
 #define STM32_UART_USART2_IRQ_PRIORITY      3
 #define STM32_UART_USART1_DMA_PRIORITY      0
 #define STM32_UART_USART2_DMA_PRIORITY      0
 #define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
 /*
 * USB driver system settings.
 */
 #define STM32_USB_USE_USB1                  TRUE
 #define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
 #define STM32_USB_USB1_LP_IRQ_PRIORITY      3
 #endif /* _MCUCONF_H_ */
@@ -0,0 +1,13 @@
 # Ext65Rev2
 Ext65Rev2 Keyboard
 * Keyboard Maintainer: [Xelus22](https://github.com/Xelus22)
 * Hardware Supported: Ext65Rev2
 * Hardware Availability: [Keyboard Treehouse](https://keyboardtreehouse.com/collections/all/products/ext65-r2-pcb)
 Make example for this keyboard (after setting up your build environment):
    make aeboards/ext65/rev2:default
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -0,0 +1,45 @@
 #include "rev2.h"
 #ifdef OLED_DRIVER_ENABLE
 void board_init(void) {
  SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
  SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
 }
 oled_rotation_t oled_init_user(oled_rotation_t rotation) {
    return OLED_ROTATION_90;  // rotates the display 90 degrees
 }
 #else
 void keyboard_pre_init_user(void) {
  // Call the keyboard pre init code.
  // Set our LED pins as output
  setPinOutput(B4);
  setPinOutput(B3);
  setPinOutput(A15);
  setPinOutput(A14);
 }
 bool led_update_kb(led_t led_state) {
    bool res = led_update_user(led_state);
    if(res) {
        writePin(B4, led_state.num_lock);
        writePin(B3, led_state.caps_lock);
        writePin(A15, led_state.scroll_lock);
    }
    return res;
 }
 layer_state_t layer_state_set_kb(layer_state_t state) {
    switch (get_highest_layer(state)) {
      case 1:
        writePinHigh(A14);
        break;
      default: //  for any other layers, or the default layer
        writePinLow(A14);
        break;
      }
    return layer_state_set_user(state);
 }
 #endif
@@ -0,0 +1,24 @@
 #pragma once
 #include "quantum.h"
 #define ____ KC_NO
 #define LAYOUT_ext65( \
  K000, K100, K001, K101,  K002, K102, K003, K103, K004, K104, K005, K105, K006, K106, K007, K107, K008, K108, K508, K009, \
  K200, K300, K201, K301,  K202, K302, K203, K303, K204, K304, K205, K305, K206, K306, K207, K307, K208, K308,       K209, \
  K400, K500, K401, K501,  K402, K502, K403, K503, K404, K504, K405, K505, K406, K506, K407, K507, K408,             K409, \
  K600, K700, K601, K701,  K602, K702, K603, K703, K604, K704, K605, K705, K606, K706, K607, K708,             K608, K709, \
  K800, K900, K801, K901,  K802, K902, K803,                   K805,             K906, K807,             K908, K808, K909  \
 ) { \
  { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009 }, \
  { K100, K101, K102, K103, K104, K105, K106, K107, K108, ____ }, \
  { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209 }, \
  { K300, K301, K302, K303, K304, K305, K306, K307, K308, ____ }, \
  { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409 }, \
  { K500, K501, K502, K503, K504, K505, K506, K507, K508, ____ }, \
  { K600, K601, K602, K603, K604, K605, K606, K607, K608, ____ }, \
  { K700, K701, K702, K703, K704, K705, K706, ____, K708, K709 }, \
  { K800, K801, K802, K803, ____, K805, ____, K807, K808, ____ }, \
  { K900, K901, K902, ____, ____, ____, K906, ____, K908, K909 } \
 }
@@ -0,0 +1,23 @@
 # MCU name
 MCU = STM32F072
 # Build Options
 #   comment out to disable the options.
 #
 BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = yes      # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 WS2812_DRIVER = spi
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
@@ -0,0 +1,24 @@
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  /*[0]
   *┌───┬───┬───┬───┐
   *│N L│/  │*  │-  │
   *├───┼───┼───┼───┤
   *│7  │8  │9  │   │
   *├───┼───┼───┤+  │
   *│4  │5  │6  │   │
   *├───┼───┼───┼───┤
   *│1  │2  │3  │   │
   *├───┴───┼───┤Ent│
   *│0      │.  │   │
   *└───────┴───┴───┘
   */
    [0] = LAYOUT_numpad_5x4(KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
                            KC_P7, KC_P8, KC_P9,
 				            KC_P4, KC_P5, KC_P6, KC_PPLS,
 				            KC_P1, KC_P2, KC_P3,
 				            KC_P0, KC_PDOT, KC_PENT)
 };
@@ -0,0 +1,25 @@
 # [Sendy YK](https://mr.sendyyk.com)'s Keymap
 `LAYOUT_numpad_5x4`
 ### [0]
 ```
 ┌───┬───┬───┬───┐
 │N L│/  │*  │-  │
 ├───┼───┼───┼───┤
 │7  │8  │9  │   │
 ├───┼───┼───┤+  │
 │4  │5  │6  │   │
 ├───┼───┼───┼───┤
 │1  │2  │3  │   │
 ├───┴───┼───┤Ent│
 │0      │.  │   │
 └───────┴───┴───┘
 ```
 ## Build The Firmware
 You will need to build the firmware. To do so go to your terminal window and run the compile command:
    qmk compile -kb ai03/soyuz -km mrsendyyk
@@ -25,10 +25,8 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-LAYOUTS = ortho_5x4
+LAYOUTS = ortho_5x4 numpad_5x4
@@ -39,3 +39,31 @@
 	{ K30, K31, K32, K33 }, \
 	{ K40, K41, K42, K43 }  \
 }
 /*
 * ┌───┬───┬───┬───┐
 * │00 │01 │02 │03 │
 * ├───┼───┼───┼───┤
 * │10 │11 │12 │   │
 * ├───┼───┼───┤23 │
 * │20 │21 │22 │   │
 * ├───┼───┼───┼───┤
 * │30 │31 │32 │   │
 * ├───┴───┼───┤43 │
 * │41     │42 │   │
 * └───────┴───┴───┘
 */
 #define LAYOUT_numpad_5x4( \
 	k00, k01, k02, k03, \
 	k10, k11, k12,      \
 	k20, k21, k22, k23, \
 	k30, k31, k32,      \
 	     k41, k42, k43  \
 ) { \
 	{ k00,   k01, k02, k03   }, \
 	{ k10,   k11, k12, KC_NO }, \
 	{ k20,   k21, k22, k23   }, \
 	{ k30,   k31, k32, KC_NO }, \
 	{ KC_NO, k41, k42, k43   }  \
 }
@@ -0,0 +1,85 @@
 /* Copyright 2020 codecoffeecode
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 enum layers {
    _MAIN,
    _LOWER,
    _RAISE,
 };
 // Readability keycodes
 #define LOWER MO(_LOWER)
 #define RAISE MO(_RAISE)
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    /* Layer _MAIN
     * ,-----------------------------------------------------------------------------------.
     * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
     * |------+------+------+------+------+-------------+------+------+------+------+------|
     * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
     * |------+------+------+------+------+------|------+------+------+------+------+------|
     * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |  /   |Enter |
     * |------+------+------+------+------+------+------+------+------+------+------+------|
     * | Ctrl | Caps |  Alt |  GUI |Layer1|    Space    |Layer2| Left | Down |  Up  |Right |
     * `-----------------------------------------------------------------------------------'
     */
  [_MAIN] = LAYOUT_ortho_4x12(
    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
    KC_LCTL, KC_CAPS, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
  ),
    /* Layer _LOWER
     * ,-----------------------------------------------------------------------------------.
     * |   `  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  Del |
     * |------+------+------+------+------+-------------+------+------+------+------+------|
     * |      | Vol- | Vol+ | Mute | Play |      |      |  F11 |  F12 |      |      |      |
     * |------+------+------+------+------+------|------+------+------+------+------+------|
     * |      |      |      |      |      |      |      |      |      |      |      |      |
     * |------+------+------+------+------+------+------+------+------+------+------+------|
     * | Reset|      |      |      |      |      |      |      |      |      |      |      |
     * `-----------------------------------------------------------------------------------'
     */
  [_LOWER] = LAYOUT_ortho_4x12(
  KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_DEL,
  _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPLY, _______, _______, KC_F11,  KC_F12,  _______, _______, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
  RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
  ),
  /* Layer _RAISE
     * ,-----------------------------------------------------------------------------------.
     * |      |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |      |
     * |------+------+------+------+------+-------------+------+------+------+------+------|
     * |      |      |      |      |      |      |      |   -  |   =  |   [  |   ]  |  \   |
     * |------+------+------+------+------+------|------+------+------+------+------+------|
     * |      |      |      |      |      |      |      |      |      |      |      |      |
     * |------+------+------+------+------+------+------+------+------+------+------+------|
     * |      |      |      |      |      |      |      |      |      |      |      |      |
     * `-----------------------------------------------------------------------------------'
     */
  [_RAISE] = LAYOUT_ortho_4x12(
  _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
  _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
  )
 };
@@ -28,38 +28,37 @@ enum layer_names {
    _FN3
 };
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	[_BASE] = LAYOUT_default(
-		KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS,
+		KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS,
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
-		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
-		KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
 		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
    ),
    [_FN1] = LAYOUT_default(
-		KC_GESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, KC_TRNS, RGB_TOG,
+		KC_GESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, RGB_TOG,
-		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD,
+		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD,
-		BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		BL_INC,  BL_DEC,  BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_INC,  BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-		KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
+		BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
    ),
    [_FN2] = LAYOUT_default(
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
    ),
    [_FN3] = LAYOUT_default(
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
    )
 };
@@ -32,7 +32,7 @@ enum layer_names {
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	[_BASE] = LAYOUT_all(
-        KC_ESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        KC_ESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_MPLY,
 		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS,
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
 		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
@@ -41,10 +41,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    ),
    [_FN1] = LAYOUT_all(
-        KC_ESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        KC_ESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS,
 		KC_GESC, KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL, KC_TRNS, RGB_TOG,
-		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD,
+		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD,
-		BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		BL_INC,  BL_DEC,  BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
    ),
@@ -0,0 +1,19 @@
 /* Copyright 2020 codecoffeecode
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #define RGBLIGHT_HUE_STEP 8
@@ -0,0 +1,51 @@
 /* Copyright 2020 codecoffeecode
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    [0] = LAYOUT(
      KC_HOME,              KC_UP,   KC_END,   /*|*/ KC_TRNS,
      KC_LEFT,              KC_DOWN, KC_RIGHT, /*|*/ KC_TRNS,
      KC_MPRV,              KC_MPLY, KC_MNXT,  /*|*/ KC_TRNS,
      LCTL(LSFT(KC_ESC)),   RGB_TOG, LGUI(KC_L)
      ),
 };
 void encoder_update_user(uint8_t index, bool clockwise) {
    switch(index) {
      case 0:
        if (clockwise) {
          tap_code(KC_VOLU); // Volume
        } else {
          tap_code(KC_VOLD);
        }
        break;
      case 1:
        if (clockwise) {
          tap_code(KC_MS_WH_DOWN);  // Scroll
        } else {
          tap_code(KC_MS_WH_UP);
        }
        break;
      case 2:
        if (clockwise) {
          rgblight_increase_hue(); // RGB Hue
        } else {
          rgblight_decrease_hue();
        }
        break;
    }
 }
@@ -0,0 +1,23 @@
 /*
    Keymap for the DZ60RGB keyboard.
    Copyright (C) 2020  Dimiter Geelen
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <https://www.gnu.org/licenses/>.
 */
 #pragma once
 #define FORCE_NKRO
 #define PERMISSIVE_HOLD
 #define TAPPING_TERM 150
@@ -0,0 +1,60 @@
 /*
    Keymap for the DZ60RGB keyboard.
    Copyright (C) 2020  Dimiter Geelen
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <https://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 enum didel_layers {
    _QWERTY,
    _MEDIA,
    _RGB,
    _DVORAK,
 };
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    [_QWERTY] = LAYOUT(
        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
        CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
        LSFT_T(KC_GRAVE), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL),
        KC_LCTL, LM(1, MOD_LALT), KC_LGUI, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
    ),
    [_MEDIA] = LAYOUT(
        TO(3), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_POWER,
        _______, _______, KC_UP, _______, _______, _______, KC_CALC, _______, KC_INS, _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
        _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, EEP_RST,
        _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, KC_END, KC_PGDN, KC_VOLU, KC_MUTE,
        _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT
    ),
    [_RGB] = LAYOUT(
        _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
        _______, RGB_TOG, _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, _______, _______, _______, RESET,
        _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, RGB_SPD, _______, _______, EEP_RST,
        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
        _______, _______, _______, _______, _______, _______, _______, _______, _______
    ),
    [_DVORAK] = LAYOUT(
        KC_DLR, KC_AMPR, KC_LBRC, KC_LCBR, KC_RCBR, KC_LPRN, KC_EQL, KC_ASTR, KC_RPRN, KC_PLUS, KC_RBRC, KC_EXLM, KC_HASH, KC_BSPC,
        KC_TAB, KC_SCLN, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_AT, KC_BSLS,
        KC_CAPS, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT,
        KC_LSFT, KC_QUOT, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, RSFT_T(KC_Z), KC_UP, KC_DEL,
        KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, TO(0), KC_LEFT, KC_DOWN, KC_RGHT
    )
 };
@@ -0,0 +1 @@
 NKRO_ENABLE = yes
@@ -1 +0,0 @@
 #define KIIBOHD_BOOTLOADER
@@ -1,32 +1,18 @@
 # MCU name
 MCU = MK20DX256
 # Linker script to use
 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
 #   or <this_dir>/ld/
 # - NOTE: a custom ld script is needed for EEPROM on Teensy LC
 # - LDSCRIPT =
 #   - MKL26Z64 for Teensy LC
 #   - MK20DX128 for Teensy 3.0
 #   - MK20DX256 for Teensy 3.1 and 3.2
 #   - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
 #   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
 MCU_LDSCRIPT = MK20DX256BLDR8
 # Vector table for application
 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
 OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
-BOOTLOADER = dfu
+# Bootloader selection
 BOOTLOADER = kiibohd
 # Build Options
 #   comment out to disable the options.
 #
 DFU_ARGS = -d 1c11:b007
 DFU_SUFFIX_ARGS = -p b007 -v 1c11
 BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration
 MOUSEKEY_ENABLE  = yes # Mouse keys
 EXTRAKEY_ENABLE  = yes # Audio control and System control
@@ -15,3 +15,22 @@
 */
 #include "rar.h"
 void keyboard_pre_init_kb(void) {
    // Set our LED pins as output.
    setPinOutput(B1);
    setPinOutput(B3);
    keyboard_pre_init_user();
 }
 bool led_update_kb(led_t led_state) {
    bool res = led_update_user(led_state);
    if (res) {
        writePin(B1, led_state.caps_lock);
        writePin(B3, led_state.scroll_lock);
    }
    return res;
 }
@@ -26,14 +26,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    KC_LCTL,  KC_LGUI,  KC_LALT,                       KC_SPC,                          KC_RALT,  MO(1)  ,  KC_APP,  KC_RCTL),
 [1] = LAYOUT_60_ansi_split_bs_rshift( /* FN */
-    KC_GRV,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_TRNS, KC_TRNS,
+    KC_GRV,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_DEL, KC_DEL,
    KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RESET,    KC_TRNS,
    KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,            KC_TRNS,
    KC_TRNS,            KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
    KC_VOLU,  KC_VOLD,  KC_MUTE,                                KC_TRNS,                                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS),
 [2] = LAYOUT_60_ansi_split_bs_rshift( /* Empty for dynamic keymaps */
-    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_DEL, KC_DEL,
    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,            KC_TRNS,
    KC_TRNS,            KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
@@ -21,7 +21,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 #ifdef CONSOLE_ENABLE
                    printf(buffer);
 #else
-                    SEND_STRING(buffer);
+                    send_string(buffer);
 #endif
            }
            break;
@@ -20,8 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0x7161
+#define VENDOR_ID       0x04D8
-#define PRODUCT_ID      0x5239
+#define PRODUCT_ID      0xEB53
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Swiftrax
 #define PRODUCT         CowFish
@@ -0,0 +1,61 @@
 /*
 Copyright 2020 Ross Montsinger
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "config_common.h"
 /* USB Device descriptor parameter */
 #define VENDOR_ID 0xFEED
 #define PRODUCT_ID 0xB07D
 #define DEVICE_VER 0x0002
 #define MANUFACTURER Montsinger
 #define PRODUCT Wabi
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 14
 /*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on
 diode)
 * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
 #define MATRIX_ROW_PINS { D5, F5, F6, F7, B0 }
 #define MATRIX_COL_PINS { F4, F1, F0, E6, B3, B7, D0, D1, D2, D3, D4, D6, D7, B5 }
 #define UNUSED_PINS { B1, B2, C7, C6, B6, B4 }
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0
@@ -0,0 +1,12 @@
 {
    "keyboard_name": "Wabi", 
    "url": "www.montsinger.net", 
    "maintainer": "Montsinger", 
    "width": 18.5, 
    "height": 5, 
    "layouts": {
        "LAYOUT": {
            "layout": [{"label":"Esc", "x":1.25, "y":0}, {"label":"1", "x":2.25, "y":0}, {"label":"2", "x":3.25, "y":0}, {"label":"3", "x":4.25, "y":0}, {"label":"4", "x":5.25, "y":0}, {"label":"5", "x":6.25, "y":0}, {"label":"6", "x":8.75, "y":0}, {"label":"7", "x":9.75, "y":0}, {"label":"8", "x":10.75, "y":0}, {"label":"9", "x":11.75, "y":0}, {"label":"0", "x":12.75, "y":0}, {"label":"-", "x":13.75, "y":0}, {"label":"=", "x":14.75, "y":0}, {"label":"Backspace", "x":15.75, "y":0, "w":2}, {"label":"Tab", "x":0.75, "y":1, "w":1.5}, {"label":"Q", "x":2.25, "y":1}, {"label":"W", "x":3.25, "y":1}, {"label":"E", "x":4.25, "y":1}, {"label":"R", "x":5.25, "y":1}, {"label":"T", "x":6.25, "y":1}, {"label":"Y", "x":8.75, "y":1}, {"label":"U", "x":9.75, "y":1}, {"label":"I", "x":10.75, "y":1}, {"label":"O", "x":11.75, "y":1}, {"label":"P", "x":12.75, "y":1}, {"label":"[", "x":13.75, "y":1}, {"label":"]", "x":14.75, "y":1}, {"label":"\\", "x":15.75, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0.5, "y":2, "w":1.75}, {"label":"A", "x":2.25, "y":2}, {"label":"S", "x":3.25, "y":2}, {"label":"D", "x":4.25, "y":2}, {"label":"F", "x":5.25, "y":2}, {"label":"G", "x":6.25, "y":2}, {"label":"H", "x":8.75, "y":2}, {"label":"J", "x":9.75, "y":2}, {"label":"K", "x":10.75, "y":2}, {"label":"L", "x":11.75, "y":2}, {"label":";", "x":12.75, "y":2}, {"label":"'", "x":13.75, "y":2}, {"label":"Enter", "x":14.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":8.75, "y":3}, {"label":"M", "x":9.75, "y":3}, {"label":",", "x":10.75, "y":3}, {"label":".", "x":11.75, "y":3}, {"label":"/", "x":12.75, "y":3}, {"label":"Shift", "x":13.75, "y":3, "w":2.75}, {"label":"Up", "x":16.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":4, "y":4, "w":1.25}, {"label":"Space", "x":5.25, "y":4}, {"label":"Page Down", "x":6.25, "y":4, "w":1.25}, {"label":"Enter", "x":8.5, "y":4, "w":1.25}, {"label":"Space", "x":9.75, "y":4}, {"label":"Backspace", "x":10.75, "y":4, "w":1.25}, {"label":"Left", "x":15.5, "y":4}, {"label":"Down", "x":16.5, "y":4}, {"label":"Right", "x":17.5, "y":4}]        }
    }
 }
@@ -0,0 +1,27 @@
 /*
 Copyright 2020 Ross Montsinger
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 #define _QWERTY 0
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [_QWERTY] = LAYOUT(
    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,
    KC_LCTL, KC_LGUI,          KC_LALT, KC_SPC,  KC_PGDN,  KC_ENT,  KC_SPC,  KC_BSPC,                   KC_LEFT, KC_DOWN, KC_RGHT
  ),
 };
@@ -0,0 +1,68 @@
 /*
 Copyright 2020 Ross Montsinger
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 #include "rossman360.h"
 #define PGMOD LT(_NUM, KC_PGDN)
 #define TABMOD LT(_FN1, KC_TAB)
 #define SPCMOD LT(_FN1, KC_SPACE)
 #define ENTMOD LT(_FN2, KC_ENTER)
 #define RSMOD LT(_FN1, KC_MINS)
 enum layer_names {
  _BASE,
  _DEL,
  _FN1,
  _FN2,
  _NUM,
 };
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_BASE] = LAYOUT(
    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
    JUMPBACK,KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RSMOD  , KC_UP,
    CMDBSP,  ALTDEL,           CTRLSP,  TABMOD,  PGMOD  , ENTMOD , SPCMOD , MO(_DEL),                  KC_LEFT, KC_DOWN, KC_RGHT
  ),
 [_DEL] = LAYOUT(
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    REMCAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, _______,          BLINE  , KC_BSPC, BWORD  , KC_NO  , KC_NO  , _______,                   _______, _______, _______
  ),
 [_FN1] = LAYOUT(
    RESET  , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NTAB,
    _______, _______, _______, _______, _______, _______, _______, UNDO   , _______, _______, _______, _______, _______, KC_SLSH,
    _______, _______, _______, _______, _______, _______, KC_HOME, KC_LEFT, KC_UP  , KC_RIGHT,KC_END , _______, CTAB,
    _______, _______, XPANDR , _______, PMERGE , _______, _______, PMERGE , KC_DOWN, _______, _______, _______, _______,
    _______, _______,          _______, LWORD  , RWORD  , KC_NO  , _______, KC_NO  ,                   _______, _______, _______
  ),
 [_FN2] = LAYOUT(
    _______, SPEAK1 , SPEAK2 , SPEAK3 , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, _______,          _______, PARADOWN, CSPEAK, _______, _______, _______,                   _______, _______, _______
  ),
 [_NUM] = LAYOUT(
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, _______, _______, _______, _______, _______, _______, KC_7   , KC_8   , KC_9   , _______, _______, _______, _______,
    _______, _______, _______, _______, _______, _______, KC_MINS, KC_4   , KC_5   , KC_6   , KC_COLN, _______, _______,
    _______, _______, _______, _______, _______, _______, _______, KC_1   , KC_2   , KC_3   , KC_BSLS, _______, _______,
    _______, _______,          _______, KC_0   , _______, KC_NO  , KC_SPC , KC_0   ,                   _______, _______, _______
  ),
 };
@@ -0,0 +1,19 @@
 # Wabi
 ![Wabi](https://i.imgur.com/cCyv5jFl.jpg)
 A conjoined-split 60% ortholinear amoeba handwire made by Ross Montsinger with 104-keycap sets in mind.
 * Keyboard Maintainer: [Rossman360](https://github.com/rossman360)
 * Hardware Supported: Postage Board Mini
 * Hardware Availability: [Montsinger.net](https://montsinger.net)
 Make example for this keyboard (after setting up your build environment):
    make handwired/wabi:default
 Flashing example for this keyboard:
    make handwired/wabi:default:flash
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -0,0 +1,22 @@
 # MCU name
 MCU = atmega32u4
 # Bootloader selection
 BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here:https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
@@ -0,0 +1,15 @@
 /*
 Copyright 2020 Ross Montsinger
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "wabi.h"
@@ -0,0 +1,40 @@
 /* Copyright 2020 Ross Montsinger
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "quantum.h"
 /* This is a shortcut to help you visually see your layout.
 *
 * The first section contains all of the arguments representing the physical
 * layout of the board and position of the keys.
 *
 * The second converts the arguments into a two-dimensional array which
 * represents the switch matrix.
 */
 #define LAYOUT( \
    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,      \
    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
    K40, K41,      K43, K44, K45, K46, K47, K48,           K4B, K4C, K4D \
    ) { \
  { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
  { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
  { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO }, \
  { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D }, \
  { K40, K41, K41, K43, K44, K45, K46, K47, K48, K48, K48, K4B, K4C, K4D } \
 }
@@ -406,6 +406,16 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
            }
            return false;
        case PSE_FN:
            if (record->event.pressed) {
                if (l_pressed && !l_long_pressed) {
                    register_code(l_inner);
                    l_long_pressed = true;
                }
                if (r_pressed && !r_long_pressed) {
                    register_code(r_inner);
                    r_long_pressed = true;
                }
            }
            action_pseudo_process(record, base_layer, keymap_jis2us);
            return false;
        default:
@@ -1 +0,0 @@
 #define KIIBOHD_BOOTLOADER
@@ -1,17 +1,6 @@
 # MCU name
 MCU = MK20DX128
 # Linker script to use
 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
 #   or <this_dir>/ld/
 # - NOTE: a custom ld script is needed for EEPROM on Teensy LC
 # - LDSCRIPT =
 #   - MKL26Z64 for Teensy LC
 #   - MK20DX128 for Teensy 3.0
 #   - MK20DX256 for Teensy 3.1 and 3.2
 #   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
 MCU_LDSCRIPT = MK20DX128BLDR4
 # Board: it should exist either in <chibios>/os/hal/boards/
 #  or <this_dir>/boards
 # - BOARD =
@@ -26,15 +15,13 @@ BOARD = MCHCK_K20
 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
 OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
-BOOTLOADER = dfu
+# Bootloader selection
 BOOTLOADER = kiibohd
 # Build Options
 #   comment out to disable the options.
 #
 DFU_ARGS = -d 1c11:b007
 DFU_SUFFIX_ARGS = -p b007 -v 1c11
 BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration
 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
 MOUSEKEY_ENABLE = yes	# Mouse keys
@@ -0,0 +1,22 @@
 /*
 This is the c configuration file for the keymap
 Copyright 2012 Jun Wako <[email protected]>
 Copyright 2015 Jack Humbert
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #define IGNORE_MOD_TAP_INTERRUPT
@@ -56,7 +56,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef BACKLIGHT_ENABLE
 #define BACKLIGHT_PIN C6
 #define BACKLIGHT_LEVELS 5
-#define BACKLIGHT_BREATHING //not working with splits right now
+// #define BACKLIGHT_BREATHING //not working with splits right now
 #define BREATHING_PERIOD 6
 #endif
@@ -1 +0,0 @@
 #define KIIBOHD_BOOTLOADER
@@ -1,28 +1,14 @@
 # MCU name
 MCU = MK20DX256
 # Linker script to use
 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
 #   or <this_dir>/ld/
 # - NOTE: a custom ld script is needed for EEPROM on Teensy LC
 # - LDSCRIPT =
 #   - MKL26Z64 for Teensy LC
 #   - MK20DX128 for Teensy 3.0
 #   - MK20DX256 for Teensy 3.1 and 3.2
 #   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
 #   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
 MCU_LDSCRIPT = MK20DX256BLDR8
 # Board: it should exist either in <chibios>/os/hal/boards/
 #  or <this_dir>/boards
 # This board was copied from PJRC_TEENSY_3_1. The only difference should be a
 # hack to ensure the watchdog has started before trying to disable it.
 BOARD = IC_TEENSY_3_1
-DFU_ARGS = -d 1c11:b007
+# Bootloader selection
-DFU_SUFFIX_ARGS = -p b007 -v 1c11
+BOOTLOADER = kiibohd
 BOOTLOADER = dfu
 # Build Options
 #   comment out to disable the options.
@@ -130,14 +130,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 #ifdef SUBPROJECT_alvicstep
    #include "alvicstep/config.h"
 #endif
 #ifdef SUBPROJECT_stapelberg
    #include "stapelberg/config.h"
 #endif
 #ifdef SUBPROJECT_kint2pp
    #include "kint2pp/config.h"
 #endif
 #endif
@@ -0,0 +1,30 @@
 #include QMK_KEYBOARD_H
 #define DVORAK_MAC_MODE 0 // Base Dvorak in Kinesis's Mac Mode with (Cmd, Option, Ctrl, Cmd) thumbkeys
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [DVORAK_MAC_MODE] = LAYOUT(
        // left hand
        KC_CAPS,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5, KC_F6, KC_F7, KC_F8,
        KC_EQL,   KC_1,    KC_2,    KC_3,    KC_4,   KC_5,
        KC_TAB,   KC_QUOT, KC_COMM, KC_DOT,  KC_P,   KC_Y,
        KC_ESC,   KC_A,    KC_O,    KC_E,    KC_U,   KC_I,
        KC_LSFT,  KC_SCLN, KC_Q,    KC_J,    KC_K,   KC_X,
                  KC_GRV,  KC_INS,  KC_LEFT, KC_RIGHT,
        // left thumb
                            KC_LGUI, KC_LALT,
                                     KC_HOME,
                   KC_BSPC, KC_DEL,  KC_END,
        // right hand
        KC_F9,  KC_F10,   KC_F11,   KC_F12,   KC_PSCR, KC_SLCK, KC_PAUS, KC_NLCK, KC_POWER,
        KC_6,   KC_7,     KC_8,     KC_9,     KC_0,    KC_MINS,
        KC_F,   KC_G,     KC_C,     KC_R,     KC_L,    KC_SLSH,
        KC_D,   KC_H,     KC_T,     KC_N,     KC_S,    KC_BSLS,
        KC_B,   KC_M,     KC_W,     KC_V,     KC_Z,    KC_RSFT,
                          KC_UP,  KC_DOWN, KC_LBRC,    KC_RBRC,
        // right thumb
        KC_RCTL,    KC_RGUI,
        KC_PGUP,
        KC_PGDN, KC_ENT, KC_SPC
    )
 };
@@ -10,6 +10,9 @@
 #ifdef KEYBOARD_kinesis_kint2pp
 	#include "kint2pp.h"
 #endif
 #ifdef KEYBOARD_kinesis_nguyenvietyen
 	#include "nguyenvietyen.h"
 #endif
 #include "quantum.h"
@@ -0,0 +1,109 @@
 # Viet's Kinesis + Pro Micro
 July 2020
 This work is inspired by `alvicstep`'s solution. Instead of hooking up the Kinesis to a Teensy 2, this one hooks it up to a Pro Micro.
 ## Kinesis Board Layout
 The following is a reinterpretation of [@chrisandreae](https://github.com/chrisandreae/keyboard-firmware/blob/public/hardware/kinesis.h)'s work.
 ### Used Pins
 * 8 columns mapped to output pins 21 - 28
 * 16 rows mapped to 4 input pins: pin 39 - 36. Rows are traversed by iterating and setting 16 values from 0000 to 1111. 
 * 4 leds (e.g. capslock) mapped to input pin 1 - 4
 * keypad key mapped to pin 5
 * program key mapped to pin 6
 * `VCC` mapped to pin 40
 ### Matrix Configuration
 The matrix configuration of the columns and rows on my Advantage is as follows:
 |        | row 0  | row 1  | row 2  | row 3  | row 4  | row 5  | row 6  | row 7  | row 8  | row 9  | row A  | row B  | row C  | row D  | row E  | row F |
 |  ----- | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | -----  | ----- |
 |  col0  | F6     | F8     | F7     | 5%     | 4$     | 3#     | 2@     | 1!     | =+     |        |        |        |        |        |        |       |
 |  col1  | F3     | F5     | F4     | T      | R      | E      | W      | Q      | Tab    |        |        |        |        |        |        |       |
 |  col2  | Esc    | F2     | F1     | G      | F      | D      | S      | A      | CapsLk |        |        |        |        |        |        |       |
 |  col3  | F9     | F11    | F10    | B      | V      | C      | X      | Z      | LShift | Up     |        | Down   |        | [{     | ]}     |       |
 |  col4  | F12    | ScrLk  | PrtSc  | Right  |        | Left   | Insert | ~      |        | 6^     | 7&     | 8*     |        | 9(     | 0)     | -_    |
 |  col5  | Pause  |        |        | LAlt   |        | Home   |        | End    |        | Y      | U      | I      |        | O      | P      | `\|`  |
 |  col6  |        |        |        | LCtrl  | Delete | Bksp   | RCtrl  | Enter  | Space  | H      | J      | K      |        | L      | ;:     | '"    |
 |  col7  |        |        |        |        | RGUI   |        | PageUp |        | PageDn | N      | M      | ,<     |        | .>     | /?     | RShift |
 (this is a modified copy from [@alvicstep](https://github.com/qmk/qmk_firmware/blob/master/keyboards/kinesis/alvicstep/alvicstep.h))
 In the code, keypad and program keys are mapped respectively to col0 and col1 of row C, the 12th row.  
 ### Omitted Pins
 There are pins that we currently omit:
 * serial eeprom clock line mapped to pin 7
 * serial eeprom data line mapped to pin 8
 * EEPROM write protect mapped to pin 10.
 * foot switch 1 mapped to pin 11 
 * PS/2 clock mapped to pin 12
 * PS/2 data mapped to pin 13
 * foot switch 2 mapped to pin 17
 * foot switch 3 mapped to pin 15
 * audio mapped to pin 32
 ### DIP Socket
 Here's an ASCII drawing of the 40 pin DIP socket. 
 ```
   DL2   1  40  VCC
   DR1   2  39  A
   DR2   3  38  B
   DL1   4  37  C
   KPD   5  36  G
   PGM   6  35
   SCL   7  34
   SDA   8  33
   RST   9  32  BUZZ
    WP  10  31  EA
   FS1  11  30  ALE
 CLOCK  12  29  PSEN
  DATA  13  28  r8
        14  27  r7
   FS3  15  26  r6
        16  25  r5
   FS2  17  24  r4
 XTAL1  18  23  r3
 XTAL2  19  22  r2
   GND  20  21  r1
 ```
 (this is copied from [@wjanssens](https://raw.githubusercontent.com/wjanssens/tmk_keyboard/master/keyboard/kinesis/doc/readme.txt))
 ## Pin Mapping to Pro Micro
 The following table is ordered by physical Arduino pin order.
 | Arduino | Kinesis | Meaning |
 | ------- | ------- | ------- |
 | D3      | 36      | G       |
 | D2      | 37      | C       |
 | GND     |         |         |
 | GND     |         |         |
 | D1      | 38      | B       |
 | D0      | 39      | A       |
 | D4      | 1       | DL2     |
 | C6      | 2       | DR1     |
 | D7      | 3       | DR2     |
 | E6      | 4       | DL1     |
 | B4      | 5       | KPD     |
 | B5      | 6       | PGM     |
 | B6      | 21      | r1      |
 | B2      | 22      | r2      |
 | B3      | 23      | r3      |
 | B1      | 24      | r4      |
 | F7      | 25      | r5      |
 | F6      | 26      | r6      |
 | F5      | 27      | r7      |
 | F4      | 28      | r8      |
 | VCC     | 40      |         |
 | RESET   |         |         |
 | GND     | 20      |         |
 | RAW     |         |         |
 ## Notes
 * The rows are multiplexed. Instead of reading them out, one sets the row value and corresponding column values are returned through r1-r8.
 * On my keyboard, the keypad and program key have dedicated pins. Since row 12 had no mapping in the physical matrix, there's a code override injects the keypad and program pins to the first two bits in the matrix.
 * I've experimented with debouncing approaches. The current setting delivers a snappier feeling than Kinesis's factory default for me.
@@ -0,0 +1,27 @@
 #pragma once
 /* USB Device descriptor parameter */
 #define PRODUCT_ID 0x6060
 #define DEVICE_VER 0x0003
 /* key matrix size */
 #define MATRIX_ROWS 16
 #define MATRIX_COLS 8
 /*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
 // Passed through the port multipler, so 4 pins =16
 #define MATRIX_ROW_PINS { D0, D1, D2, D3 }
 #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 }
 #define UNUSED_PINS
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
@@ -0,0 +1,64 @@
 #include "matrix.h"
 #include "quantum.h"
 static matrix_row_t read_row(uint8_t row) {
    matrix_io_delay();  // without this wait read unstable value.
    // keypad and program buttons
    if (row == 12) {
        return ~(readPin(B4) | (readPin(B5) << 1) | 0b11111100);
    }
    return ~(readPin(B6) | readPin(B2) << 1 | readPin(B3) << 2 | readPin(B1) << 3 | readPin(F7) << 4 | readPin(F6) << 5 | readPin(F5) << 6 | readPin(F4) << 7);
 }
 static void unselect_rows(void) {
    // set A,B,C,G to 0
    PORTD &= 0xF0;
 }
 static void select_rows(uint8_t row) {
    // set A,B,C,G to row value
    PORTD |= (0x0F & row);
 }
 void matrix_init_custom(void) {
    // output low (multiplexers)
    setPinOutput(D0);
    setPinOutput(D1);
    setPinOutput(D2);
    setPinOutput(D3);
    // input with pullup (matrix)
    setPinInputHigh(B6);
    setPinInputHigh(B2);
    setPinInputHigh(B3);
    setPinInputHigh(B1);
    setPinInputHigh(F7);
    setPinInputHigh(F6);
    setPinInputHigh(F5);
    setPinInputHigh(F4);
    // input with pullup (program and keypad buttons)
    setPinInputHigh(B4);
    setPinInputHigh(B5);
    // initialize row and col
    unselect_rows();
 }
 bool matrix_scan_custom(matrix_row_t current_matrix[]) {
    bool matrix_has_changed = false;
    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
        select_rows(i);
        matrix_row_t row = read_row(i);
        unselect_rows();
        bool row_has_changed = current_matrix[i] != row;
        matrix_has_changed |= row_has_changed;
        current_matrix[i] = row;
    }
    return matrix_has_changed;
 }
@@ -0,0 +1,31 @@
 #include "nguyenvietyen.h"
 void matrix_init_kb(void) {
    led_init_ports();
    matrix_init_user();
 }
 void led_init_ports() {
    // * Set our LED pins as output
    setPinOutput(D7);  // Keypad LED
    setPinOutput(C6);  // ScrLock LED
    setPinOutput(D4);  // NumLock LED
    setPinOutput(E6);  // CapsLock LED
    // turn all LEDs off by default
    writePinHigh(D7);
    writePinHigh(C6);
    writePinHigh(D4);
    writePinHigh(E6);
 }
 bool led_update_kb(led_t led_state) {
    bool res = led_update_user(led_state);
    if (res) {
        writePin(D7, !led_state.compose);
        writePin(C6, !led_state.scroll_lock);
        writePin(D4, !led_state.num_lock);
        writePin(E6, !led_state.caps_lock);
    }
    return res;
 }
@@ -0,0 +1,74 @@
 #pragma once
 #include "quantum.h"
 #define ___ KC_NO
 #define LAYOUT(                                    \
    k02, k22, k12, k01, k21, k11, k00, k20, k10,   \
    k80, k70, k60, k50, k40, k30,                  \
    k81, k71, k61, k51, k41, k31,                  \
    k82, k72, k62, k52, k42, k32,                  \
    k83, k73, k63, k53, k43, k33,                  \
         k74, k64, k54, k34,                       \
                             k36, k35,             \
                                  k55,             \
                        k56, k46, k75,             \
                                                   \
    k03, k23, k13, k04, k24, k14, k05, kC0, kC1,   \
                   k94, kA4, kB4, kD4, kE4, kF4,   \
                   k95, kA5, kB5, kD5, kE5, kF5,   \
                   k96, kA6, kB6, kD6, kE6, kF6,   \
                   k97, kA7, kB7, kD7, kE7, kF7,   \
                        k93, kB3, kD3, kE3,        \
              k47, k66,                            \
              k67,                                 \
              k87, k76, k86                        \
 ) {                                                \
    { k00,  k01,  k02,  k03,  k04,  k05,  ___,  ___ }, \
    { k10,  k11,  k12,  k13,  k14,  ___,  ___,  ___ }, \
    { k20,  k21,  k22,  k23,  k24,  ___,  ___,  ___ }, \
    { k30,  k31,  k32,  k33,  k34,  k35,  k36,  ___ }, \
    { k40,  k41,  k42,  k43,  ___,  ___,  k46,  k47 }, \
    { k50,  k51,  k52,  k53,  k54,  k55,  k56,  ___ }, \
    { k60,  k61,  k62,  k63,  k64,  ___,  k66,  k67 }, \
    { k70,  k71,  k72,  k73,  k74,  k75,  k76,  ___ }, \
    { k80,  k81,  k82,  k83,  ___,  ___,  k86,  k87 }, \
    { ___,  ___,  ___,  k93,  k94,  k95,  k96,  k97 }, \
    { ___,  ___,  ___,  ___,  kA4,  kA5,  kA6,  kA7 }, \
    { ___,  ___,  ___,  kB3,  kB4,  kB5,  kB6,  kB7 }, \
    { kC0,  kC1,  ___,  ___,  ___,  ___,  ___,  ___ }, \
    { ___,  ___,  ___,  kD3,  kD4,  kD5,  kD6,  kD7 }, \
    { ___,  ___,  ___,  kE3,  kE4,  kE5,  kE6,  kE7 }, \
    { ___,  ___,  ___,  ___,  kF4,  kF5,  kF6,  kF7 }  \
 }
 /*  ---------------- LEFT HAND -----------------   ---------------- RIGHT HAND ---------------- */
 #define LAYOUT_pretty(                                                                           \
    k02, k22, k12, k01, k21, k11, k00, k20, k10,   k03, k23, k13, k04, k24, k14, k05, kC0, kC1,  \
    k80, k70, k60, k50, k40, k30,                                 k94, kA4, kB4, kD4, kE4, kF4,  \
    k81, k71, k61, k51, k41, k31,                                 k95, kA5, kB5, kD5, kE5, kF5,  \
    k82, k72, k62, k52, k42, k32,                                 k96, kA6, kB6, kD6, kE6, kF6,  \
    k83, k73, k63, k53, k43, k33,                                 k97, kA7, kB7, kD7, kE7, kF7,  \
         k74, k64, k54, k34,                                           k93, kB3, kD3, kE3,       \
                             k36, k35,                       k47, k66,                           \
                                  k55,                       k67,                                \
                        k56, k46, k75,                       k87, k76, k86                       \
 ) {                                                    \
    { k00,  k01,  k02,  k03,  k04,  k05,  ___,  ___ }, \
    { k10,  k11,  k12,  k13,  k14,  ___,  ___,  ___ }, \
    { k20,  k21,  k22,  k23,  k24,  ___,  ___,  ___ }, \
    { k30,  k31,  k32,  k33,  k34,  k35,  k36,  ___ }, \
    { k40,  k41,  k42,  k43,  ___,  ___,  k46,  k47 }, \
    { k50,  k51,  k52,  k53,  k54,  k55,  k56,  ___ }, \
    { k60,  k61,  k62,  k63,  k64,  ___,  k66,  k67 }, \
    { k70,  k71,  k72,  k73,  k74,  k75,  k76,  ___ }, \
    { k80,  k81,  k82,  k83,  ___,  ___,  k86,  k87 }, \
    { ___,  ___,  ___,  k93,  k94,  k95,  k96,  k97 }, \
    { ___,  ___,  ___,  ___,  kA4,  kA5,  kA6,  kA7 }, \
    { ___,  ___,  ___,  kB3,  kB4,  kB5,  kB6,  kB7 }, \
    { kC0,  kC1,  ___,  ___,  ___,  ___,  ___,  ___ }, \
    { ___,  ___,  ___,  kD3,  kD4,  kD5,  kD6,  kD7 }, \
    { ___,  ___,  ___,  kE3,  kE4,  kE5,  kE6,  kE7 }, \
    { ___,  ___,  ___,  ___,  kF4,  kF5,  kF6,  kF7 }  \
 }
@@ -0,0 +1,20 @@
 # MCU name
 MCU = atmega32u4
 # Bootloader selection
 BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = yes
 MOUSEKEY_ENABLE = yes
 EXTRAKEY_ENABLE = yes
 COMMAND_ENABLE = yes
 NKRO_ENABLE = yes
 SLEEP_LED_ENABLE = yes
 CUSTOM_MATRIX = lite
 SRC += matrix.c
 # experimentally determined to be sufficient :)
 DEBOUNCE=1
@@ -28,8 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define MASTER_RIGHT
 // #define EE_HANDS
 #define SSD1306OLED
 #define USE_SERIAL_PD2
 #define TAPPING_FORCE_HOLD
@@ -49,4 +47,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 14    // Number of LEDs
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_SLEEP
-*/
+*/
@@ -8,8 +8,6 @@
  #include "ssd1306.h"
 #endif
 #ifdef RGBLIGHT_ENABLE
 //Following line allows macro to read current RGB settings
 extern rgblight_config_t rgblight_config;
@@ -135,16 +133,18 @@ void matrix_init_user(void) {
    #ifdef RGBLIGHT_ENABLE
      RGB_current_mode = rgblight_config.mode;
    #endif
    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
    #ifdef SSD1306OLED
        iota_gfx_init(!has_usb());   // turns on the display
    #endif
 }
-//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+//SSD1306 OLED update loop, make sure to enable OLED_DRIVER_ENABLE=yes in rules.mk
-#ifdef SSD1306OLED
+#ifdef OLED_DRIVER_ENABLE
-// When add source files to SRC in rules.mk, you can use functions.
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
  if (!is_keyboard_master())
    return OLED_ROTATION_180;  // flips the display 180 degrees if offhand
  return rotation;
 }
 // When you add source files to SRC in rules.mk, you can use functions.
 const char *read_layer_state(void);
 const char *read_logo(void);
 void set_keylog(uint16_t keycode, keyrecord_t *record);
@@ -156,42 +156,24 @@ const char *read_keylogs(void);
 // void set_timelog(void);
 // const char *read_timelog(void);
-void matrix_scan_user(void) {
+void oled_task_user(void) {
-   iota_gfx_task();
+  if (is_keyboard_master()) {
 }
 void matrix_render_user(struct CharacterMatrix *matrix) {
  if (is_master) {
    // If you want to change the display of OLED, you need to change here
-    matrix_write_ln(matrix, read_layer_state());
+    oled_write_ln(read_layer_state(), false);
-    matrix_write_ln(matrix, read_keylog());
+    oled_write_ln(read_keylog(), false);
-    matrix_write_ln(matrix, read_keylogs());
+    oled_write_ln(read_keylogs(), false);
-    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
+    //oled_write_ln(read_mode_icon(keymap_config.swap_lalt_lgui), false);
-    //matrix_write_ln(matrix, read_host_led_state());
+    //oled_write_ln(read_host_led_state(), false);
-    //matrix_write_ln(matrix, read_timelog());
+    //oled_write_ln(read_timelog(), false);
  } else {
-    matrix_write(matrix, read_logo());
+    oled_write(read_logo(), false);
  }
 }
-
+#endif // OLED_DRIVER_ENABLE
 void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
    memcpy(dest->display, source->display, sizeof(dest->display));
    dest->dirty = true;
  }
 }
 void iota_gfx_task_user(void) {
  struct CharacterMatrix matrix;
  matrix_clear(&matrix);
  matrix_render_user(&matrix);
  matrix_update(&display, &matrix);
 }
 #endif//SSD1306OLED
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  if (record->event.pressed) {
-#ifdef SSD1306OLED
+#ifdef OLED_DRIVER_ENABLE
    set_keylog(keycode, record);
 #endif
    // set_timelog();
@@ -6,10 +6,10 @@ EXTRAKEY_ENABLE = yes       # Audio control and System control
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
 SWAP_HANDS_ENABLE = no      # Enable one-hand typing
 OLED_DRIVER_ENABLE= yes     # OLED display
 # If you want to change the display of OLED, you need to change here
-SRC +=  ./lib/glcdfont.c \
+SRC +=  ./lib/rgb_state_reader.c \
        ./lib/rgb_state_reader.c \
        ./lib/layer_state_reader.c \
        ./lib/logo_reader.c \
        ./lib/keylogger.c \
@@ -0,0 +1,143 @@
 /* Copyright 2020 Maarten Dekkers <[email protected]>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "config_common.h"
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0x4705
 #define PRODUCT_ID      0x633A
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Maartenwut
 #define PRODUCT         GH80 3700
 /* key matrix size */
 #define MATRIX_ROWS 6
 #define MATRIX_COLS 4
 /*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
 #define MATRIX_ROW_PINS {B3,C7,C6,B6,B5,B4}
 #define MATRIX_COL_PINS {B0,D7,D6,D4}
 #define UNUSED_PINS {}
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 /*
 * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
 */
 // #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 // #define RGB_DI_PIN B2
 // #ifdef RGB_DI_PIN
 //   #define RGBLED_NUM 8
 //   #define RGBLIGHT_HUE_STEP 8
 //   #define RGBLIGHT_SAT_STEP 8
 //   #define RGBLIGHT_VAL_STEP 8
 //   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
 //   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 // /*== all animations enable ==*/
 //   #define RGBLIGHT_ANIMATIONS
 // /*== or choose animations ==*/
 //   #define RGBLIGHT_EFFECT_BREATHING
 //   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 //   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
 //   #define RGBLIGHT_EFFECT_SNAKE
 //   #define RGBLIGHT_EFFECT_KNIGHT
 //   #define RGBLIGHT_EFFECT_CHRISTMAS
 //   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
 //   #define RGBLIGHT_EFFECT_RGB_TEST
 //   #define RGBLIGHT_EFFECT_ALTERNATING
 // /*== customize breathing effect ==*/
 //   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
 //   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
 //   /*==== use exp() and sin() ====*/
 //   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
 //   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 // #endif
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */
 /* disable debug print */
 //#define NO_DEBUG
 /* disable print */
 //#define NO_PRINT
 /* disable action features */
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 // Define rotary encoder
 #define ENCODERS_PAD_A { F1 }
 #define ENCODERS_PAD_B { F4 }
@@ -0,0 +1,46 @@
 /* Copyright 2020 Maarten Dekkers <[email protected]>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "gh80_3700.h"
 void matrix_init_kb(void) {
  // put your keyboard start-up code here
  // runs once when the firmware starts up
  matrix_init_user();
  led_init_ports();
 }
 void led_init_ports(void) {
  setPinOutput(E6);
  setPinOutput(B1);
  setPinOutput(D0);
  setPinOutput(D1);
  setPinOutput(F0);
  writePinHigh(E6);
  writePinHigh(B1);
  writePinHigh(D0);
  writePinHigh(D1);
  writePinHigh(F0);
 }
 bool led_update_kb(led_t led_state) {
  if(led_update_user(led_state)) {
    writePin(E6, !led_state.num_lock);
  }
  return true;
 }
@@ -0,0 +1,63 @@
 /* Copyright 2020 Maarten Dekkers <[email protected]>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "quantum.h"
 /* This a shortcut to help you visually see your layout.
 *
 * The first section contains all of the arguments representing the physical
 * layout of the board and position of the keys.
 *
 * The second converts the arguments into a two-dimensional array which
 * represents the switch matrix.
 */
 #define LAYOUT_all LAYOUT_ortho_6x4
 #define LAYOUT_ortho_6x4( \
    k00, k01, k02, k03, \
    k10, k11, k12, k13, \
    k20, k21, k22, k23, \
    k30, k31, k32, k33, \
    k40, k41, k42, k43, \
    k50, k51, k52, k53  \
 ) \
 { \
    { k00, k01, k02, k03 }, \
    { k10, k11, k12, k13 }, \
    { k20, k21, k22, k23 }, \
    { k30, k31, k32, k33 }, \
    { k40, k41, k42, k43 }, \
    { k50, k51, k52, k53 }  \
 }
 #define LAYOUT_numpad_6x4( \
    k00, k01, k02, k03,    \
    k10, k11, k12, k13,    \
    k20, k21, k22,         \
    k30, k31, k32, k33,    \
    k40, k41, k42,         \
    k50,      k52, k53     \
 ) \
 { \
    { k00, k01, k02, k03 },   \
    { k10, k11, k12, k13 },   \
    { k20, k21, k22, KC_NO }, \
    { k30, k31, k32, k33 },   \
    { k40, k41, k42, KC_NO }, \
    { k50, KC_NO, k52, k53 }  \
 }
@@ -0,0 +1,72 @@
 {
    "keyboard_name": "GH80-3700", 
    "url": "https://github.com/Maartenwut/gh80-series/tree/master/GH80-3700", 
    "maintainer": "Maartenwut", 
    "width": 4, 
    "height": 7, 
    "layouts": {
        "LAYOUT_ortho_6x4": {
            "layout": [
                {"x":0, "y":0},
                {"x":1, "y":0},
                {"x":2, "y":0},
                {"x":3, "y":0},
                {"x":0, "y":2},
                {"x":1, "y":2},
                {"x":2, "y":2},
                {"x":3, "y":2},
                {"x":0, "y":3},
                {"x":1, "y":3},
                {"x":2, "y":3},
                {"x":3, "y":3},
                {"x":0, "y":4},
                {"x":1, "y":4},
                {"x":2, "y":4},
                {"x":3, "y":4},
                {"x":0, "y":5},
                {"x":1, "y":5},
                {"x":2, "y":5}, 
                {"x":3, "y":5},
                {"x":0, "y":6},
                {"x":1, "y":6},
                {"x":2, "y":6},
                {"x":3, "y":6}
            ]
        },
        "LAYOUT_numpad_6x4": {
            "layout": [
                {"x":0, "y":0},
                {"x":1, "y":0},
                {"x":2, "y":0},
                {"x":3, "y":0},
                {"x":0, "y":2},
                {"x":1, "y":2},
                {"x":2, "y":2},
                {"x":3, "y":2},
                {"x":0, "y":3},
                {"x":1, "y":3},
                {"x":2, "y":3},
                {"x":0, "y":4},
                {"x":1, "y":4},
                {"x":2, "y":4},
                {"x":3, "y":3, "h":2},
                {"x":0, "y":5},
                {"x":1, "y":5},
                {"x":2, "y":5},
                {"x":0, "y":6, "w":2},
                {"x":2, "y":6},
                {"x":3, "y":5, "h":2}
            ]
        }
    }
 }
@@ -0,0 +1,26 @@
 /* Copyright 2020 Maarten Dekkers <[email protected]>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [0] = LAYOUT_ortho_6x4(
  KC_ESC,   KC_TAB,   KC_EQL,   KC_BSPC,
  KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,
  KC_P7,    KC_P8,    KC_P9,    KC_PPLS,
  KC_P4,    KC_P5,    KC_P6,    KC_PPLS,
  KC_P1,    KC_P2,    KC_P3,    KC_PENT,
  KC_P0,    KC_P0,    KC_PDOT,  KC_PENT),
 };
@@ -0,0 +1 @@
 This is the default keymap for the GH80-3700.
@@ -0,0 +1,69 @@
 /* Copyright 2020 Maarten Dekkers <[email protected]>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #ifdef PS2_USE_USART
 #define PS2_CLOCK_PORT  PORTD
 #define PS2_CLOCK_PIN   PIND
 #define PS2_CLOCK_DDR   DDRD
 #define PS2_CLOCK_BIT   5
 #define PS2_DATA_PORT   PORTD
 #define PS2_DATA_PIN    PIND
 #define PS2_DATA_DDR    DDRD
 #define PS2_DATA_BIT    2
 /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
 /* set DDR of CLOCK as input to be slave */
 #define PS2_USART_INIT() do {   \
    PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT);   \
    PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT);     \
    UCSR1C = ((1 << UMSEL10) |  \
              (3 << UPM10)   |  \
              (0 << USBS1)   |  \
              (3 << UCSZ10)  |  \
              (0 << UCPOL1));   \
    UCSR1A = 0;                 \
    UBRR1H = 0;                 \
    UBRR1L = 0;                 \
 } while (0)
 #define PS2_USART_RX_INT_ON() do {  \
    UCSR1B = ((1 << RXCIE1) |       \
              (1 << RXEN1));        \
 } while (0)
 #define PS2_USART_RX_POLL_ON() do { \
    UCSR1B = (1 << RXEN1);          \
 } while (0)
 #define PS2_USART_OFF() do {    \
    UCSR1C = 0;                 \
    UCSR1B &= ~((1 << RXEN1) |  \
                (1 << TXEN1));  \
 } while (0)
 #define PS2_USART_RX_READY      (UCSR1A & (1<<RXC1))
 #define PS2_USART_RX_DATA       UDR1
 #define PS2_USART_ERROR         (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
 #define PS2_USART_RX_VECT       USART1_RX_vect
 #define PS2_MOUSE_ENABLE_SCROLLING
 #define PS2_MOUSE_INIT_DELAY 1000 
 #define PS2_MOUSE_BTN_LEFT      0
 #define PS2_MOUSE_BTN_RIGHT     1
 #define PS2_MOUSE_BTN_MIDDLE    2
 #define PS2_MOUSE_X_MULTIPLIER 2
 #define PS2_MOUSE_Y_MULTIPLIER 2
 #define PS2_MOUSE_V_MULTIPLIER 1
 #define PS2_MOUSE_SCROLL_BTN_MASK 0
 #define PS2_MOUSE_USE_REMOTE_MODE
 #endif
@@ -0,0 +1,26 @@
 /* Copyright 2020 Maarten Dekkers <[email protected]>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [0] = LAYOUT_ortho_6x4(
  KC_ESC,   KC_TAB,   KC_EQL,   KC_BSPC,
  KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,
  KC_P7,    KC_P8,    KC_P9,    KC_PPLS,
  KC_P4,    KC_P5,    KC_P6,    KC_PPLS,
  KC_P1,    KC_P2,    KC_P3,    KC_PENT,
  KC_P0,    KC_P0,    KC_PDOT,  KC_PENT),
 };
@@ -0,0 +1 @@
 This is a keymap for the GH80-3700 with PS/2 mouse functionality enabled.
@@ -0,0 +1,5 @@
 # Build Options
 #   change yes to no to disable
 #
 PS2_MOUSE_ENABLE = yes
 PS2_USE_USART = yes
@@ -0,0 +1,21 @@
 /* Copyright 2020 Maarten Dekkers <[email protected]>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #define RGB_DI_PIN B2
 #define RGBLED_NUM 8
 #define RGBLIGHT_ANIMATIONS
@@ -0,0 +1,26 @@
 /* Copyright 2020 Maarten Dekkers <[email protected]>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [0] = LAYOUT_ortho_6x4(
  KC_ESC,   KC_TAB,   KC_EQL,   KC_BSPC,
  KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,
  KC_P7,    KC_P8,    KC_P9,    KC_PPLS,
  KC_P4,    KC_P5,    KC_P6,    KC_PPLS,
  KC_P1,    KC_P2,    KC_P3,    KC_PENT,
  KC_P0,    KC_P0,    KC_PDOT,  KC_PENT),
 };
@@ -0,0 +1 @@
 This is a keymap for the GH80-3700 with RGB enabled.
@@ -0,0 +1,4 @@
 # Build Options
 #   change yes to no to disable
 #
 RGBLIGHT_ENABLE = yes
@@ -0,0 +1,50 @@
 /* Copyright 2020 Maarten Dekkers <[email protected]>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [0] = LAYOUT_ortho_6x4(
  KC_ESC,   KC_TAB,   KC_EQL,   KC_BSPC,
  KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,
  KC_P7,    KC_P8,    KC_P9,    KC_PPLS,
  KC_P4,    KC_P5,    KC_P6,    KC_PPLS,
  KC_P1,    KC_P2,    KC_P3,    KC_PENT,
  KC_P0,    KC_P0,    KC_PDOT,  KC_PENT),
 [1] = LAYOUT_ortho_6x4(
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______),
 [2] = LAYOUT_ortho_6x4(
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______),
 [3] = LAYOUT_ortho_6x4(
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______,
  _______,  _______,  _______,  _______),
 };
@@ -0,0 +1,2 @@
 VIA_ENABLE = yes
 LTO_ENABLE = yes
@@ -0,0 +1,15 @@
 # GH80-3700
 ![GH80-3700](https://i.imgur.com/xMCzb8vl.jpg)
 ## Support
 * Keyboard Maintainer: [Maarten Dekkers](https://github.com/maartenwut)
 * Hardware Supported: GH80-3700 PCB
 * Hardware Availability: [maartenwut.com](https://maartenwut.com/product/gh80-3700-numpad-pcb/)
 ## Build
 Make example for this keyboard (after setting up your build environment):
    make maartenwut/gh80_3700:default
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -0,0 +1,24 @@
 # MCU name
 MCU = atmega32u4
 # Bootloader selection
 BOOTLOADER = qmk-dfu
 # Build Options
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 ENCODER_ENABLE = yes        # Enable support for rotary encoders
 LAYOUTS = numpad_6x4 ortho_6x4
@@ -0,0 +1,175 @@
 /*
 Copyright 2020 noclew
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "config_common.h"
 /* USB Device descriptor parameter */
 #define VENDOR_ID 0x9906
 #define PRODUCT_ID 0x0000
 #define DEVICE_VER 0x0001
 #define MANUFACTURER nckiibs
 #define PRODUCT Flatbread60
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 12
 /*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
 #define MATRIX_ROW_PINS { F6, B1, B3, B2, B6 }
 #define MATRIX_COL_PINS { F4, F5, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 }
 #define UNUSED_PINS
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 #define RGB_DI_PIN F7
 #ifdef RGB_DI_PIN
  #define RGBLED_NUM 19
  #define RGBLIGHT_HUE_STEP 8
  #define RGBLIGHT_SAT_STEP 8
  #define RGBLIGHT_VAL_STEP 8
  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 /*== all animations enable ==*/
  #define RGBLIGHT_ANIMATIONS
 #endif
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Magic Key Options
 *
 * Magic keys are hotkey commands that allow control over firmware functions of
 * the keyboard. They are best used in combination with the HID Listen program,
 * found here: https://www.pjrc.com/teensy/hid_listen.html
 *
 * The options below allow the magic key functionality to be changed. This is
 * useful if your keyboard/keypad is missing keys and you want magic key support.
 *
 */
 /* key combination for magic key command */
 /* defined by default; to change, uncomment and set to the combination you want */
 // #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
 /* override magic key keymap */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
 //#define MAGIC_KEY_HELP           H
 //#define MAGIC_KEY_HELP_ALT       SLASH
 //#define MAGIC_KEY_DEBUG          D
 //#define MAGIC_KEY_DEBUG_MATRIX   X
 //#define MAGIC_KEY_DEBUG_KBD      K
 //#define MAGIC_KEY_DEBUG_MOUSE    M
 //#define MAGIC_KEY_VERSION        V
 //#define MAGIC_KEY_STATUS         S
 //#define MAGIC_KEY_CONSOLE        C
 //#define MAGIC_KEY_LAYER0         0
 //#define MAGIC_KEY_LAYER0_ALT     GRAVE
 //#define MAGIC_KEY_LAYER1         1
 //#define MAGIC_KEY_LAYER2         2
 //#define MAGIC_KEY_LAYER3         3
 //#define MAGIC_KEY_LAYER4         4
 //#define MAGIC_KEY_LAYER5         5
 //#define MAGIC_KEY_LAYER6         6
 //#define MAGIC_KEY_LAYER7         7
 //#define MAGIC_KEY_LAYER8         8
 //#define MAGIC_KEY_LAYER9         9
 //#define MAGIC_KEY_BOOTLOADER     B
 //#define MAGIC_KEY_BOOTLOADER_ALT ESC
 //#define MAGIC_KEY_LOCK           CAPS
 //#define MAGIC_KEY_EEPROM         E
 //#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
 //#define MAGIC_KEY_NKRO           N
 //#define MAGIC_KEY_SLEEP_LED      Z
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */
 /* disable debug print */
 //#define NO_DEBUG
 /* disable print */
 //#define NO_PRINT
 /* disable action features */
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 /* disable these deprecated features by default */
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
@@ -0,0 +1,18 @@
 /* Copyright 2020 noclew
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "flatbread60.h"
@@ -0,0 +1,42 @@
 /* Copyright 2020 noclew
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "quantum.h"
 /* This is a shortcut to help you visually see your layout.
 *
 * The first section contains all of the arguments representing the physical
 * layout of the board and position of the keys.
 *
 * The second converts the arguments into a two-dimensional array which
 * represents the switch matrix.
 */
 #define LAYOUT_ortho_5x12( \
    k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, \
    k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, \
    k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, k36, \
    k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, k48, \
    k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 \
 ) \
 { \
    { k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12 }, \
    { k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24 }, \
    { k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, k36 }, \
    { k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, k48 }, \
    { k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60 } \
 }
@@ -0,0 +1,253 @@
 {
    "keyboard_name": "flatbread60",
    "url": "",
    "maintainer": "noclew",
    "width": 12,
    "height": 5,
    "layouts": {
        "LAYOUT_ortho_5x12": {
            "layout": [
                {
                    "x": 0,
                    "y": 0
                },
                {
                    "x": 1,
                    "y": 0
                },
                {
                    "x": 2,
                    "y": 0
                },
                {
                    "x": 3,
                    "y": 0
                },
                {
                    "x": 4,
                    "y": 0
                },
                {
                    "x": 5,
                    "y": 0
                },
                {
                    "x": 6,
                    "y": 0
                },
                {
                    "x": 7,
                    "y": 0
                },
                {
                    "x": 8,
                    "y": 0
                },
                {
                    "x": 9,
                    "y": 0
                },
                {
                    "x": 10,
                    "y": 0
                },
                {
                    "x": 11,
                    "y": 0
                },
                {
                    "x": 0,
                    "y": 1
                },
                {
                    "x": 1,
                    "y": 1
                },
                {
                    "x": 2,
                    "y": 1
                },
                {
                    "x": 3,
                    "y": 1
                },
                {
                    "x": 4,
                    "y": 1
                },
                {
                    "x": 5,
                    "y": 1
                },
                {
                    "x": 6,
                    "y": 1
                },
                {
                    "x": 7,
                    "y": 1
                },
                {
                    "x": 8,
                    "y": 1
                },
                {
                    "x": 9,
                    "y": 1
                },
                {
                    "x": 10,
                    "y": 1
                },
                {
                    "x": 11,
                    "y": 1
                },
                {
                    "x": 0,
                    "y": 2
                },
                {
                    "x": 1,
                    "y": 2
                },
                {
                    "x": 2,
                    "y": 2
                },
                {
                    "x": 3,
                    "y": 2
                },
                {
                    "x": 4,
                    "y": 2
                },
                {
                    "x": 5,
                    "y": 2
                },
                {
                    "x": 6,
                    "y": 2
                },
                {
                    "x": 7,
                    "y": 2
                },
                {
                    "x": 8,
                    "y": 2
                },
                {
                    "x": 9,
                    "y": 2
                },
                {
                    "x": 10,
                    "y": 2
                },
                {
                    "x": 11,
                    "y": 2
                },
                {
                    "x": 0,
                    "y": 3
                },
                {
                    "x": 1,
                    "y": 3
                },
                {
                    "x": 2,
                    "y": 3
                },
                {
                    "x": 3,
                    "y": 3
                },
                {
                    "x": 4,
                    "y": 3
                },
                {
                    "x": 5,
                    "y": 3
                },
                {
                    "x": 6,
                    "y": 3
                },
                {
                    "x": 7,
                    "y": 3
                },
                {
                    "x": 8,
                    "y": 3
                },
                {
                    "x": 9,
                    "y": 3
                },
                {
                    "x": 10,
                    "y": 3
                },
                {
                    "x": 11,
                    "y": 3
                },
                {
                    "x": 0,
                    "y": 4
                },
                {
                    "x": 1,
                    "y": 4
                },
                {
                    "x": 2,
                    "y": 4
                },
                {
                    "x": 3,
                    "y": 4
                },
                {
                    "x": 4,
                    "y": 4
                },
                {
                    "x": 5,
                    "y": 4
                },
                {
                    "x": 6,
                    "y": 4
                },
                {
                    "x": 7,
                    "y": 4
                },
                {
                    "x": 8,
                    "y": 4
                },
                {
                    "x": 9,
                    "y": 4
                },
                {
                    "x": 10,
                    "y": 4
                },
                {
                    "x": 11,
                    "y": 4
                }
            ]
        }
    }
 }
@@ -0,0 +1,187 @@
 /* Copyright 2020 noclew
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 // Defines names for use in layer keycodes and the keymap
 enum layer_names { _QWERTY, _COLEMAK, _DVORAK, _LOWER, _RAISE, _ADJUST };
 enum layer_keycodes {
    QWERTY = SAFE_RANGE,
    COLEMAK,
    DVORAK,
 };
 // Defines the keycodes used by our macros in process_record_user
 #define LOWER MO(_LOWER)
 #define RAISE MO(_RAISE)
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* BASE
 * ,-----------------------------------------------------------------------------------.
 * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  | "    |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |      | Ctrl | Alt  | GUI  |Lower | Space|Space |Raise | Left | Down |  Up  |Right |
 * `-----------------------------------------------------------------------------------'
 * */
 [_QWERTY] = LAYOUT_ortho_5x12(
  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
  KC_NO, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
  ),
 /* Colemak
 * ,-----------------------------------------------------------------------------------.
 * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Del  |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |      | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
 * `-----------------------------------------------------------------------------------'
 */
 [_COLEMAK] = LAYOUT_ortho_5x12(
  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL,
  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
  KC_NO, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
  ),
 /* Dvorak
 * ,-----------------------------------------------------------------------------------.
 * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Del  |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |      | Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
 * `-----------------------------------------------------------------------------------'
 */
 [_DVORAK] = LAYOUT_ortho_5x12(
  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL,
  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT,
  KC_NO, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
  ),
 /* Lower
 * ,-----------------------------------------------------------------------------------.
 * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |      |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
 * `-----------------------------------------------------------------------------------'
 */
 [_LOWER] = LAYOUT_ortho_5x12(
  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
 /* Raise
 * ,-----------------------------------------------------------------------------------.
 * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |  PGUP|  PGDN|      |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
 * `-----------------------------------------------------------------------------------'
 */
 [_RAISE] = LAYOUT_ortho_5x12(
  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
 /* FN (Lower + Raise)
 * ,-----------------------------------------------------------------------------------.
 * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |      | Reset| Debug|      |      |      |      |      |      |      |      |  Del |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * |      |      |      |      |      |AGNorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * |      | rgb  |rgb M | Hue  |brt + |brt - |sat + |      |      |      |      |      |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |      |      |      |      |      |             |      |      |      |      |      |
 * `-----------------------------------------------------------------------------------'
 */
 [_ADJUST] = LAYOUT_ortho_5x12(
  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
  _______, RESET,   DEBUG,   _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
  _______, _______, _______, _______, _______, AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______,
  _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_VAI, RGB_VAD, RGB_SAI, _______, _______, _______, _______, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
 )
 };
 layer_state_t layer_state_set_user(layer_state_t state) {
  state = update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
  return state;
 }
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
    switch (keycode) {
        case QWERTY:
            if (record->event.pressed) {
                print("mode just switched to qwerty and this is a huge string\n");
                set_single_persistent_default_layer(_QWERTY);
            }
            return false;
        case COLEMAK:
            if (record->event.pressed) {
                set_single_persistent_default_layer(_COLEMAK);
            }
            return false;
        case DVORAK:
            if (record->event.pressed) {
                set_single_persistent_default_layer(_DVORAK);
            }
            return false;
    }
    return true;
 }
@@ -0,0 +1 @@
 # The default keymap for flatbread60
@@ -0,0 +1,114 @@
 /* Copyright 2020 noclew
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 enum layer_names { _QWERTY, _LOWER, _RAISE, _ADJUST };
 enum layer_keycodes {
    QWERTY = SAFE_RANGE,
    COLEMAK,
    DVORAK,
 };
 #define LOWER MO(_LOWER)
 #define RAISE MO(_RAISE)
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* BASE
 * ,-----------------------------------------------------------------------------------.
 * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  | "    |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |      | Ctrl | Alt  | GUI  |Lower | Space|Space |Raise | Left | Down |  Up  |Right |
 * `-----------------------------------------------------------------------------------'
 * */
 [_QWERTY] = LAYOUT_ortho_5x12(
  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
  KC_NO, KC_LCTL, KC_LALT, KC_LGUI, FN_MO13, KC_SPC,  KC_SPC,  FN_MO23, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
  ),
 /* Lower
 * ,-----------------------------------------------------------------------------------.
 * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |      |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
 * `-----------------------------------------------------------------------------------'
 */
 [_LOWER] = LAYOUT_ortho_5x12(
  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
 /* Raise
 * ,-----------------------------------------------------------------------------------.
 * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |  PGUP|  PGDN|      |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
 * `-----------------------------------------------------------------------------------'
 */
 [_RAISE] = LAYOUT_ortho_5x12(
  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
 /* FN (Lower + Raise)
 * ,-----------------------------------------------------------------------------------.
 * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |      | Reset| Debug|      |      |      |      |      |      |      |      |  Del |
 * |------+------+------+------+------+-------------+------+------+------+------+------|
 * |      |      |      |      |      |AGnorm|AGswap|      |      |      |      |      |
 * |------+------+------+------+------+------|------+------+------+------+------+------|
 * |      | rgb  |rgb M | Hue  |brt + |brt - |sat + |      |      |      |      |      |
 * |------+------+------+------+------+------+------+------+------+------+------+------|
 * |      |      |      |      |      |             |      |      |      |      |      |
 * `-----------------------------------------------------------------------------------'
 */
 [_ADJUST] = LAYOUT_ortho_5x12(
  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
  _______, RESET,   DEBUG,   _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
  _______, _______, _______, _______, _______, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______,
  _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_VAI, RGB_VAD, RGB_SAI, _______, _______, _______, _______, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
 )
 };
@@ -0,0 +1,2 @@
 VIA_ENABLE = yes
 RGBLIGHT_ENABLE = no
@@ -0,0 +1,19 @@
 # flatbread60
 ![flatbread60](https://i.imgur.com/kIPP0JKl.jpg)
 This is a custom PCB made by a hobbiest, and it has an ortholinear 60 key layout. Flatbread60 supports Pro Micro and its wireless variants, such as Blue Micro. A battery switch slot and extra pinout is on the board.  
 * Keyboard Maintainer: [noclew](https://github.com/noclew)
 * Hardware Supported: flatbread60 PCB
 * Hardware Availability: Not commercially available, but the board fabricaion file will be uploaded in the near future.
 Make example for this keyboard (after setting up your build environment):
    make nckiibs/flatbread60:default
 Flashing example for this keyboard:
    make nckiibs/flatbread60:default:flash
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
Author	SHA1	Message	Date
nopunin10did	b4ae7badd4	Issue 9942: Add LSA, RSA, RCS, LSA_T, RSA_T, and RCS_T (#9943 ) * Issue 9942: Add Quantum defines Add codes to quantum_keycodes for LSA, RSA, RCS, and their corresponding _T macros * 9942: Add documentation for new defines Add documentation for new defines in feature request 9942. Also define SAGR and SAGR_T as aliases for RSA and RSA_T. * Update quantum/quantum_keycodes.h * Update docs/keycodes.md * Update docs/keycodes.md * Update docs/keycodes.md * Update docs/keycodes.md	2020-08-17 02:08:15 -07:00
stanrc85	2ddcd81020	[Keymap] layer indicator lights (#10004 ) * move caps lock indicator position * use num lock and scroll lock as layer indicators	2020-08-17 01:33:57 -07:00
codecoffeecode	869b648088	Keymap Updates for DMQ Design SPIN, Boardsource 4x12, and Gingham (#9911 ) * Updating keymaps for Gingham and DMQ Design SPIN and adding keymap for BoardSource 4x12 * Update keyboards/boardsource/4x12/keymaps/codecoffeecode/keymap.c	2020-08-17 01:32:07 -07:00
Takeshi ISHII	00af37a659	[Docs] Japanese translation of docs/proton_c_conversion.md (#9927 ) * start translation docs/ja/proton_c_conversion.md * Japanese translation is in progress. * Japanese translation is in progress. * update * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * Update docs/ja/proton_c_conversion.md * update docs/ja/_summary.md: GPIO congtrol	2020-08-17 01:19:52 -07:00
Maarten Dekkers	792a480244	[Keyboard] Maartenwut GH80-3700 (#9960 ) * Add GH80-3700 * Add via keymap * Update gh80_3700.h * Update config.h * LAYOUT_all -> LAYOUT_ortho_6x4 * Update readme.md	2020-08-16 19:15:30 -07:00
Mike Rix Wolfe	febf27361a	update mikefightsbears keymap for Lily58 (#9988 )	2020-08-16 18:44:56 -07:00
kelvinhall05	3b3a1b2a63	[Keyboard] Southpaw75 (#9844 ) * adding southpaw75 * Added readme.md for Southpaw75 * adding info.json * Update keyboards/southpaw75/rules.mk * Update keyboards/southpaw75/southpaw75.h * Update keyboards/southpaw75/keymaps/default/keymap.c * Update keyboards/southpaw75/config.h * Update keyboards/southpaw75/southpaw75.h * Update keyboards/southpaw75/keymaps/default/keymap.c * Update keyboards/southpaw75/rules.mk * Update keyboards/southpaw75/rules.mk * Update keyboards/southpaw75/config.h * Update keyboards/southpaw75/readme.md * Update keyboards/southpaw75/readme.md * Update config.h * Update keymap.c * Update readme.md * Update southpaw75.c * Update southpaw75.h	2020-08-16 18:42:26 -07:00
Viet Yen Nguyen	194dc0984e	[Keyboard] Kinesis + Pro Micro (#9944 ) * [Keyboard] Kinesis + Pro Micro init - docs for DIY - custom matrix = lite - a near-factory dvorak mapping - optimized debouncing for lower latency * chore: reformatting * chore: update doc * chore: cleanups according to PR feedback * chore: PR feedback * fix: compile error * chore: add include * fix: LEDs hanging after USB disconnect * chore: enable QMK goodies by default * chore: use semantic write pin	2020-08-16 18:37:42 -07:00
Rossman360	e071206c58	[Keyboard] Wabi handwire (#9704 ) * cleaning up * got some working bones * working pretty well * really livin' now * all done * copyright adjustments * default keymap * readme * no descrip * remove trailing slashes * remove blank line * remove trailing slashes * clean up readme * clean up rules spacing * bootloader spacing * made quick json from KLE converter * remove postageboard mini references * add actual manu and product values * add make example * rework * remove double bootload define * smoller image * liscensed * correct dimensions * dimensions	2020-08-16 18:33:20 -07:00
Ryan	48bd8263a3	Fix sendstring call in onekey ADC keymap (#10031 )	2020-08-17 08:10:48 +10:00
shela	249eab34e1	Update Japanese translation of _summary.md. (#10051 )	2020-08-16 18:58:33 +01:00
Sendy YKandJoel Challis	7c7feb44b2	Add numpad llayout to ai03/soyuz & personal keymap (#10030 ) * ai03 Soyuz ## Description @ai03-2725 Soyuz: 1. Update `soyuz.h` (Add `LAYOUT_5x4`) 2. Added `keymap.c` 3. Added `readme.md` * Update readme.md * Update readme.md * Update keymap.c * Update keymap.c * Update keymap.c * Update keymap.c * Update soyuz.h Co-authored-by: Joel Challis <[email protected]> * Update keyboards/ai03/soyuz/soyuz.h Co-authored-by: Joel Challis <[email protected]> * Update keyboards/ai03/soyuz/keymaps/mrsendyyk/keymap.c Co-authored-by: Joel Challis <[email protected]> * Update keyboards/ai03/soyuz/keymaps/mrsendyyk/keymap.c Co-authored-by: Joel Challis <[email protected]> * Update rules.mk * Update keymap.c * Update keymap.c * Update keymap.c * Update readme.md * Update rules.mk * Update soyuz.h * Update soyuz.h * Update * Rename readme.md to README.md * Update keymap.c * Rename README.md to readme.md Co-authored-by: Joel Challis <[email protected]>	2020-08-16 02:26:48 +01:00
shela	f64245b10b	[keymap] Fixed an issue that long pressed alt key does not work on PSN_FN layer. (#10039 )	2020-08-15 13:54:52 +01:00
Drashna Jaelre	acc4bedddc	[Keyboard] Fix Planck/Rev6 compiler issue (#9953 ) Specifically, don't want to have both RGBLight and RGB Matrix (with WS2812) enabled at the same time. This will cause issues in usage, but apparently not when compiling. Additionally, the led matrix was not encapsulated with preprocessor code.	2020-08-15 13:18:13 +01:00
Ramon ImbaoandJoel Challis	c02666c4cb	Add indicator LEDs for GHS.RAR (#10028 ) * Add indicator LEDs for GHS.RAR * Update keyboards/ghs/rar/rar.c Co-authored-by: Joel Challis <[email protected]> Co-authored-by: Joel Challis <[email protected]>	2020-08-14 14:56:27 +01:00
Ryan	517f6d2c22	MSYS2: install packages for dfu-programmer, dfu-util, teensy-loader-cli (#10007 )	2020-08-13 23:26:14 +01:00
Ibnu Daru Aji	156ed69b46	Fixing squiggle's `layout`s in the config.qmk.fm (#10019 ) * the `layout`s in `info.json` should actually reflects the `layout`s macros in the `rev1/rev1.h`. * fixed complicated's thumb keys.	2020-08-13 23:14:19 +01:00
Dimiter Geelen	7c7078faf3	[Keymap] DZ60RGB - Add personal keymap (#9989 ) * DZ60RGB V1 - Add personal configuration (cherry picked from commit 313ce586e998f5604ed1b559bbe90de381f0b782) * [Keymap] Didel - Add license headers * [Keymap] Didel - Reformat Keymap * [Keymap] Didel - Add named layers	2020-08-12 17:28:37 -07:00
Xelus22	c957eed04b	[Keyboard] AEboards Ext65 rev2 (#9482 ) * ext65rev2 initial * open drain change and config * pwm * pwm streams * spi * ws2812 spi * oled * enable sleep * keymap and dissable oled * readd oleds * nooled * led_update_kb revised * update and remove board specific files and add to ext65rev2.c * Update OLED usb status * Update keyboards led state * Layer state set kb * Return state * Update keyboards led state * Update OLED usb status * merge master and merge rev folders * add readme * move board_init to only if OLED is enabled * update readme * update rules.mk * Remove OLED from rules.mk * Update config.h * show AEBoards * Update keyboards/aeboards/ext65/rev2/rules.mk	2020-08-12 17:24:40 -07:00
Brandon ClaveriaandSwiftrax	f1299f3292	fix handwired/swiftrax/cowfish PID and VID (#9922 ) Co-authored-by: Swiftrax <[email protected]>	2020-08-13 00:08:41 +10:00
KgOfHedgehogs	ce5cdc6f8a	Add jian/keymaps/via/config.h (#9948 )	2020-08-13 00:05:02 +10:00
Ryan	e2d4cd1a41	Add Kiibohd bootloader type to bootloader.mk (#9908 )	2020-08-12 12:28:20 +10:00
Woongki Sung	98e1e18f6b	[Keyboard] Add Flatbread60, Vaneela, and VaneelaEx by nckiibs (#9817 ) * creOnic added * made requested changed by a moderator * device name changed * fixed flatbread60 files * add vaneela and vaneelaEX support * Update keyboards/nckiibs/vaneelaex/rules.mk * vaneela rgb disabled * include error fxied * vaneelaex Via keymap fixed * vaneelaex keymap fixed * all fixed except clang part * vaneelaex config.h error fixed, clang fixed * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c done * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c done * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c done * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c done * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * Update keyboards/nckiibs/flatbread60/rules.mk done * line endings were fixed as requested * Apply suggestions from code review Thank you! * requests applied and rebased * pics changed * flatbread via fixed * Apply suggestions from code review Thanks! * Apply suggestions from code review Done! * Apply suggestions from code review except VIA keymaps Questions regarding VIA keymaps are pending * Update keyboards/nckiibs/flatbread60/keymaps/default/keymap.c * flatbread via keymap changed * Apply suggestions from code review	2020-08-09 07:50:48 -07:00
Andrew Kannan	215b71716a	Cannonkeys via keymap fixes (#9977 )	2020-08-09 18:40:52 +10:00
		`@@ -0,0 +1 @@`
							`This is the default keymap for the GH80-3700.`
		`@@ -0,0 +1 @@`
							`This is a keymap for the GH80-3700 with PS/2 mouse functionality enabled.`