Refactor ARM backlight (#7959)

Co-authored-by: Erovia <[email protected]>

build_layout.mk

@@ -3,8 +3,14 @@ LAYOUTS_REPOS := $(patsubst %/,%,$(sort $(dir $(wildcard $(LAYOUTS_PATH)/*/))))
 
 define SEARCH_LAYOUTS_REPO
     LAYOUT_KEYMAP_PATH := $$(LAYOUTS_REPO)/$$(LAYOUT)/$$(KEYMAP)
+    LAYOUT_KEYMAP_JSON := $$(LAYOUT_KEYMAP_PATH)/keymap.json
     LAYOUT_KEYMAP_C := $$(LAYOUT_KEYMAP_PATH)/keymap.c
-    ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_C))","")
+    ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_JSON))","")
+        -include $$(LAYOUT_KEYMAP_PATH)/rules.mk
+        KEYMAP_C := $(KEYBOARD_OUTPUT)/src/keymap.c
+        KEYMAP_JSON := $$(LAYOUT_KEYMAP_JSON)
+        KEYMAP_PATH := $$(LAYOUT_KEYMAP_PATH)
+    else ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_C))","")
         -include $$(LAYOUT_KEYMAP_PATH)/rules.mk
         KEYMAP_C := $$(LAYOUT_KEYMAP_C)
         KEYMAP_PATH := $$(LAYOUT_KEYMAP_PATH)
@@ -24,4 +30,7 @@ ifneq ($(FORCE_LAYOUT),)
     endif
 endif
 
-$(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))
+$(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))
+
+# Use rule from build_json.mk, but update prerequisite in case KEYMAP_JSON was updated
+$(KEYBOARD_OUTPUT)/src/keymap.c: $(KEYMAP_JSON)

docs/config_options.md

@@ -250,7 +250,10 @@ There are a few different ways to set handedness for split keyboards (listed in
 * `#define SPLIT_HAND_PIN B7`
   * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace `B7` with the pin you are using. This is optional, and if you leave `SPLIT_HAND_PIN` undefined, then you can still use the EE_HANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
 
-* `#define EE_HANDS` (only works if `SPLIT_HAND_PIN` is not defined)
+* `#define SPLIT_HAND_MATRIX_GRID <out_pin>,<in_pin>`
+  * The handedness is determined by using the intersection of the keyswitches in the key matrix, which does not exist. Normally, when this intersection is shorted (level low), it is considered left. If you define `#define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT`, it is determined to be right when the level is low.
+
+* `#define EE_HANDS` (only works if `SPLIT_HAND_PIN` and `SPLIT_HAND_MATRIX_GRID` are not defined)
   * Reads the handedness value stored in the EEPROM after `eeprom-lefthand.eep`/`eeprom-righthand.eep` has been flashed to their respective halves.
 
 * `#define MASTER_RIGHT`

docs/faq_build.md

@@ -53,7 +53,7 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uacc
 
 **Note:** With older (before 1.12) ModemManager, filtering only works when not in strict mode, the following commands can update that settings:
 ```console
-sudo sed -i 's/--filter-policy=strict/--filter-policy=default/' /lib/systemd/system/ModemManager.service
+printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf
 sudo systemctl daemon-reload
 sudo systemctl restart ModemManager
 ```

docs/feature_backlight.md

@@ -1,4 +1,4 @@
-# Backlighting
+# Backlighting :id=backlighting
 
 Many keyboards support backlit keys by way of individual LEDs placed through or underneath the keyswitches. This feature is distinct from both the [RGB underglow](feature_rgblight.md) and [RGB matrix](feature_rgb_matrix.md) features as it usually allows for only a single colour per switch, though you can obviously install multiple different single coloured LEDs on a keyboard.
 
@@ -6,103 +6,106 @@ QMK is able to control the brightness of these LEDs by switching them on and off
 
 The MCU can only supply so much current to its GPIO pins. Instead of powering the backlight directly from the MCU, the backlight pin is connected to a transistor or MOSFET that switches the power to the LEDs.
 
-## Feature Configuration
-
 Most keyboards have backlighting enabled by default if they support it, but if it is not working for you, check that your `rules.mk` includes the following:
 
 ```makefile
 BACKLIGHT_ENABLE = yes
 ```
 
-## Keycodes
+## Keycodes :id=keycodes
-Once enabled the following keycodes below can be used to change the backlight level.
 
-|Key      |Description                               |
+Once enabled, the following keycodes below can be used to change the backlight level.
-|---------|------------------------------------------|
-|`BL_TOGG`|Turn the backlight on or off              |
-|`BL_STEP`|Cycle through backlight levels            |
-|`BL_ON`  |Set the backlight to max brightness       |
-|`BL_OFF` |Turn the backlight off                    |
-|`BL_INC` |Increase the backlight level              |
-|`BL_DEC` |Decrease the backlight level              |
-|`BL_BRTG`|Toggle backlight breathing                |
 
-## Backlight Functions
+|Key      |Description                        |
+|---------|-----------------------------------|
+|`BL_TOGG`|Turn the backlight on or off       |
+|`BL_STEP`|Cycle through backlight levels     |
+|`BL_ON`  |Set the backlight to max brightness|
+|`BL_OFF` |Turn the backlight off             |
+|`BL_INC` |Increase the backlight level       |
+|`BL_DEC` |Decrease the backlight level       |
+|`BL_BRTG`|Toggle backlight breathing         |
 
-|Function  |Description                                                |
+## Functions :id=functions
-|----------|-----------------------------------------------------------|
-|`backlight_toggle()`    |Turn the backlight on or off                 |
-|`backlight_enable()`    |Turn the backlight on                        |
-|`backlight_disable()`   |Turn the backlight off                       |
-|`backlight_step()`      |Cycle through backlight levels               |
-|`backlight_increase()`  |Increase the backlight level                 |
-|`backlight_decrease()`  |Decrease the backlight level                 |
-|`backlight_level(x)`    |Sets the backlight level to specified level  |
-|`get_backlight_level()` |Return the current backlight level           |
-|`is_backlight_enabled()`|Return whether the backlight is currently on |
 
-### Backlight Breathing Functions
+These functions can be used to change the backlighting in custom code:
 
-|Function  |Description                                        |
+|Function                |Description                                 |
-|----------|---------------------------------------------------|
+|------------------------|--------------------------------------------|
-|`breathing_toggle()`  |Turn the backlight breathing on or off |
+|`backlight_toggle()`    |Turn the backlight on or off                |
-|`breathing_enable()`  |Turns on backlight breathing           |
+|`backlight_enable()`    |Turn the backlight on                       |
-|`breathing_disable()` |Turns off backlight breathing          |
+|`backlight_disable()`   |Turn the backlight off                      |
+|`backlight_step()`      |Cycle through backlight levels              |
+|`backlight_increase()`  |Increase the backlight level                |
+|`backlight_decrease()`  |Decrease the backlight level                |
+|`backlight_level(x)`    |Sets the backlight level to specified level |
+|`get_backlight_level()` |Return the current backlight level          |
+|`is_backlight_enabled()`|Return whether the backlight is currently on|
 
-## Driver Configuration
+If backlight breathing is enabled (see below), the following functions are also available:
+
+|Function             |Description                           |
+|---------------------|--------------------------------------|
+|`breathing_toggle()` |Turn the backlight breathing on or off|
+|`breathing_enable()` |Turns on backlight breathing          |
+|`breathing_disable()`|Turns off backlight breathing         |
+
+## Configuration :id=configuration
 
 To select which driver to use, configure your `rules.mk` with the following:
 
 ```makefile
-BACKLIGHT_DRIVER = software # Valid driver values are 'pwm,software,no'
+BACKLIGHT_DRIVER = software
 ```
 
-See below for help on individual drivers.
+Valid driver values are `pwm`, `software`, `custom` or `no`. See below for help on individual drivers.
 
-## Common Driver Configuration
+To configure the backlighting, `#define` these in your `config.h`:
 
-To change the behavior of the backlighting, `#define` these in your `config.h`:
+|Define               |Default      |Description                                                                          |
+|---------------------|-------------|-------------------------------------------------------------------------------------|
+|`BACKLIGHT_PIN`      |*Not defined*|The pin that controls the LED(s)                                                     |
+|`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 31 excluding off)                           |
+|`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)     |
+|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported                                             |
+|`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                      |
+|`BACKLIGHT_ON_STATE` |`1`          |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low|
 
-|Define               |Default      |Description                                                                           |
+Unless you are designing your own keyboard, you generally should not need to change the `BACKLIGHT_PIN` or `BACKLIGHT_ON_STATE`.
-|---------------------|-------------|--------------------------------------------------------------------------------------|
-|`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 31 excluding off)                            |
-|`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)      |
-|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported                                              |
-|`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                       |
-|`BACKLIGHT_ON_STATE` |`0`          |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low |
 
-### Backlight On State
+### Backlight On State :id=backlight-on-state
 
 Most backlight circuits are driven by an N-channel MOSFET or NPN transistor. This means that to turn the transistor *on* and light the LEDs, you must drive the backlight pin, connected to the gate or base, *high*.
 Sometimes, however, a P-channel MOSFET, or a PNP transistor is used. In this case, when the transistor is on, the pin is driven *low* instead.
 
 This functionality is configured at the keyboard level with the `BACKLIGHT_ON_STATE` define.
 
-## AVR driver
+### AVR Driver :id=avr-driver
+
+The `pwm` driver is configured by default, however the equivalent setting within `rules.mk` would be:
 
-On AVR boards, the default driver currently sniffs the configuration to pick the best scenario. The driver is configured by default, however the equivalent setting within rules.mk would be:
 ```makefile
 BACKLIGHT_DRIVER = pwm
 ```
 
-### Caveats
+#### Caveats :id=avr-caveats
 
-Hardware PWM is supported according to the following table:
+On AVR boards, QMK automatically decides which driver to use according to the following table:
 
 |Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328/P|
-|-------------|-------------|-------------|-------------|---------|----------|
+|-------------|-------------|-------------|-------------|---------|-----------|
-|`B1`         |             |             |             |         |Timer 1   |
+|`B1`         |             |             |             |         |Timer 1    |
-|`B2`         |             |             |             |         |Timer 1   |
+|`B2`         |             |             |             |         |Timer 1    |
-|`B5`         |Timer 1      |Timer 1      |             |         |          |
+|`B5`         |Timer 1      |Timer 1      |             |         |           |
-|`B6`         |Timer 1      |Timer 1      |             |         |          |
+|`B6`         |Timer 1      |Timer 1      |             |         |           |
-|`B7`         |Timer 1      |Timer 1      |Timer 1      |         |          |
+|`B7`         |Timer 1      |Timer 1      |Timer 1      |         |           |
-|`C4`         |Timer 3      |             |             |         |          |
+|`C4`         |Timer 3      |             |             |         |           |
-|`C5`         |Timer 3      |             |Timer 1      |         |          |
+|`C5`         |Timer 3      |             |Timer 1      |         |           |
-|`C6`         |Timer 3      |Timer 3      |Timer 1      |         |          |
+|`C6`         |Timer 3      |Timer 3      |Timer 1      |         |           |
-|`D4`         |             |             |             |Timer 1  |          |
+|`D4`         |             |             |             |Timer 1  |           |
-|`D5`         |             |             |             |Timer 1  |          |
+|`D5`         |             |             |             |Timer 1  |           |
 
-All other pins will use software PWM. If the [Audio](feature_audio.md) feature is disabled or only using one timer, the backlight PWM can be triggered by a hardware timer:
+All other pins will use timer-assisted software PWM:
 
 |Audio Pin|Audio Timer|Software PWM Timer|
 |---------|-----------|------------------|
@@ -113,44 +116,9 @@ All other pins will use software PWM. If the [Audio](feature_audio.md) feature i
 |`B6`     |Timer 1    |Timer 3           |
 |`B7`     |Timer 1    |Timer 3           |
 
-When both timers are in use for Audio, the backlight PWM will not use a hardware timer, but will instead be triggered during the matrix scan. In this case, breathing is not supported, and the backlight might flicker, because the PWM computation may not be called with enough timing precision.
+When both timers are in use for Audio, the backlight PWM cannot use a hardware timer, and will instead be triggered during the matrix scan. In this case, breathing is not supported, and the backlight might flicker, because the PWM computation may not be called with enough timing precision.
 
-### AVR Configuration
+#### Hardware PWM Implementation :id=hardware-pwm-implementation
-
-To change the behavior of the backlighting, `#define` these in your `config.h`:
-
-|Define               |Default      |Description                                                                                                  |
-|---------------------|-------------|-------------------------------------------------------------------------------------------------------------|
-|`BACKLIGHT_PIN`      |`B7`         |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
-|`BACKLIGHT_PINS`     |*Not defined*|experimental: see below for more information                                                                 |
-|`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 31 excluding off)                                                   |
-|`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)                             |
-|`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if supported                                                                     |
-|`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                                              |
-|`BACKLIGHT_ON_STATE` |`1`          |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low                        |
-
-### Backlight On State
-
-Most backlight circuits are driven by an N-channel MOSFET or NPN transistor. This means that to turn the transistor *on* and light the LEDs, you must drive the backlight pin, connected to the gate or base, *high*.
-Sometimes, however, a P-channel MOSFET, or a PNP transistor is used. In this case, when the transistor is on, the pin is driven *low* instead.
-
-This functionality is configured at the keyboard level with the `BACKLIGHT_ON_STATE` define.
-
-### Multiple backlight pins
-
-Most keyboards have only one backlight pin which control all backlight LEDs (especially if the backlight is connected to an hardware PWM pin).
-In software PWM, it is possible to define multiple backlight pins. All those pins will be turned on and off at the same time during the PWM duty cycle.
-This feature allows to set for instance the Caps Lock LED (or any other controllable LED) brightness at the same level as the other LEDs of the backlight. This is useful if you have mapped LCTRL in place of Caps Lock and you need the Caps Lock LED to be part of the backlight instead of being activated when Caps Lock is on.
-
-To activate multiple backlight pins, you need to add something like this to your user `config.h`:
-
-```c
-#define BACKLIGHT_LED_COUNT 2
-#undef BACKLIGHT_PIN
-#define BACKLIGHT_PINS { F5, B2 }
-```
-
-### Hardware PWM Implementation
 
 When using the supported pins for backlighting, QMK will use a hardware timer configured to output a PWM signal. This timer will count up to `ICRx` (by default `0xFFFF`) before resetting to 0.
 The desired brightness is calculated and stored in the `OCRxx` register. When the counter reaches this value, the backlight pin will go low, and is pulled high again when the counter resets.
@@ -159,7 +127,7 @@ In this way `OCRxx` essentially controls the duty cycle of the LEDs, and thus th
 The breathing effect is achieved by registering an interrupt handler for `TIMER1_OVF_vect` that is called whenever the counter resets, roughly 244 times per second.
 In this handler, the value of an incrementing counter is mapped onto a precomputed brightness curve. To turn off breathing, the interrupt handler is simply disabled, and the brightness reset to the level stored in EEPROM.
 
-### Timer Assisted PWM Implementation
+#### Timer Assisted PWM Implementation :id=timer-assisted-implementation
 
 When `BACKLIGHT_PIN` is not set to a hardware backlight pin, QMK will use a hardware timer configured to trigger software interrupts. This time will count up to `ICRx` (by default `0xFFFF`) before resetting to 0.
 When resetting to 0, the CPU will fire an OVF (overflow) interrupt that will turn the LEDs on, starting the duty cycle.
@@ -168,81 +136,84 @@ In this way `OCRxx` essentially controls the duty cycle of the LEDs, and thus th
 
 The breathing effect is the same as in the hardware PWM implementation.
 
-## ARM Driver
+### ARM Driver :id=arm-configuration
+
+While still in its early stages, ARM backlight support aims to eventually have feature parity with AVR. The `pwm` driver is configured by default, however the equivalent setting within `rules.mk` would be:
 
-While still in its early stages, ARM backlight support aims to eventually have feature parity with AVR. The driver is configured by default, however the equivalent setting within rules.mk would be:
 ```makefile
 BACKLIGHT_DRIVER = pwm
 ```
 
-### Caveats
+#### ChibiOS Configuration :id=arm-configuration
+
+The following `#define`s apply only to ARM-based keyboards:
+
+|Define                 |Default|Description                        |
+|-----------------------|-------|-----------------------------------|
+|`BACKLIGHT_PWM_DRIVER` |`PWMD4`|The PWM driver to use              |
+|`BACKLIGHT_PWM_CHANNEL`|`3`    |The PWM channel to use             |
+|`BACKLIGHT_PAL_MODE`   |`2`    |The pin alternative function to use|
+
+See the ST datasheet for your particular MCU to determine these values. Unless you are designing your own keyboard, you generally should not need to change them.
+
+#### Caveats :id=arm-caveats
 
 Currently only hardware PWM is supported, not timer assisted, and does not provide automatic configuration.
 
-?> Backlight support for STMF072 has had limited testing, YMMV. If unsure, set `BACKLIGHT_ENABLE = no` in your rules.mk.
+?> Backlight support for STM32F072 has had limited testing, so YMMV. If unsure, set `BACKLIGHT_ENABLE = no` in your `rules.mk`.
 
-### ARM Configuration
+### Software PWM Driver :id=software-pwm-driver
 
-To change the behavior of the backlighting, `#define` these in your `config.h`:
+In this mode, PWM is "emulated" while running other keyboard tasks. It offers maximum hardware compatibility without extra platform configuration. The tradeoff is the backlight might jitter when the keyboard is busy. To enable, add this to your `rules.mk`:
 
-|Define                  |Default      |Description                                                                                                  |
-|------------------------|-------------|-------------------------------------------------------------------------------------------------------------|
-|`BACKLIGHT_PIN`         |`B7`         |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
-|`BACKLIGHT_PWM_DRIVER`  |`PWMD4`      |The PWM driver to use, see ST datasheets for pin to PWM timer mapping. Unless you are designing your own keyboard, you shouldn't need to change this|
-|`BACKLIGHT_PWM_CHANNEL` |`3`          |The PWM channel to use, see ST datasheets for pin to PWM channel mapping. Unless you are designing your own keyboard, you shouldn't need to change this|
-|`BACKLIGHT_PAL_MODE`    |`2`          |The pin alternative function to use, see ST datasheets for pin AF mapping. Unless you are designing your own keyboard, you shouldn't need to change this|
-
-## Software PWM Driver :id=software-pwm-driver
-
-Emulation of PWM while running other keyboard tasks, it offers maximum hardware compatibility without extra platform configuration. The tradeoff is the backlight might jitter when the keyboard is busy. To enable, add this to your rules.mk:
 ```makefile
 BACKLIGHT_DRIVER = software
 ```
 
-### Software PWM Configuration
+#### Multiple Backlight Pins :id=multiple-backlight-pins
-
-To change the behavior of the backlighting, `#define` these in your `config.h`:
-
-|Define           |Default      |Description                                                                                                  |
-|-----------------|-------------|-------------------------------------------------------------------------------------------------------------|
-|`BACKLIGHT_PIN`  |`B7`         |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
-|`BACKLIGHT_PINS` |*Not defined*|experimental: see below for more information                                                                 |
-
-### Multiple backlight pins
 
 Most keyboards have only one backlight pin which control all backlight LEDs (especially if the backlight is connected to an hardware PWM pin).
-In software PWM, it is possible to define multiple backlight pins. All those pins will be turned on and off at the same time during the PWM duty cycle.
+In software PWM, it is possible to define multiple backlight pins, which will be turned on and off at the same time during the PWM duty cycle.
-This feature allows to set for instance the Caps Lock LED (or any other controllable LED) brightness at the same level as the other LEDs of the backlight. This is useful if you have mapped LCTRL in place of Caps Lock and you need the Caps Lock LED to be part of the backlight instead of being activated when Caps Lock is on.
 
-To activate multiple backlight pins, you need to add something like this to your user `config.h`:
+This feature allows to set, for instance, the Caps Lock LED's (or any other controllable LED) brightness at the same level as the other LEDs of the backlight. This is useful if you have mapped Control in place of Caps Lock and you need the Caps Lock LED to be part of the backlight instead of being activated when Caps Lock is on, as it is usually wired to a separate pin from the backlight.
+
+To activate multiple backlight pins, add something like this to your `config.h`, instead of `BACKLIGHT_PIN`:
 
 ```c
-#undef BACKLIGHT_PIN
 #define BACKLIGHT_PINS { F5, B2 }
 ```
 
-## Custom Driver
+### Custom Driver :id=custom-driver
 
-To enable, add this to your rules.mk:
+If none of the above drivers apply to your board (for example, you are using a separate IC to control the backlight), you can implement a custom backlight driver using this simple API provided by QMK. To enable, add this to your `rules.mk`:
 
 ```makefile
 BACKLIGHT_DRIVER = custom
 ```
 
-When implementing the custom driver API, the provided keyboard hooks are as follows:
+Then implement any of these hooks:
 
 ```c
 void backlight_init_ports(void) {
-    // Optional - Run on startup
+    // Optional - runs on startup
-    //          - usually you want to configure pins here
+    //   Usually you want to configure pins here
 }
 void backlight_set(uint8_t level) {
-    // Optional - Run on level change
+    // Optional - runs on level change
-    //          - usually you want to respond to the new value
+    //   Usually you want to respond to the new value
 }
 
 void backlight_task(void) {
-    // Optional - Run periodically
+    // Optional - runs periodically
-    //          - long running actions here can cause performance issues
+    //   Note that this is called in the main keyboard loop,
+    //   so long running actions here can cause performance issues
 }
 ```
+
+## Example Schematic
+
+In this typical example, the backlight LEDs are all connected in parallel towards an N-channel MOSFET. Its gate pin is wired to one of the microcontroller's GPIO pins through a 470Ω resistor to avoid ringing.
+A pulldown resistor is also placed between the gate pin and ground to keep it at a defined state when it is not otherwise being driven by the MCU.
+The values of these resistors are not critical - see [this Electronics StackExchange question](https://electronics.stackexchange.com/q/68748) for more information.
+
+![Backlight example circuit](https://i.imgur.com/BmAvoUC.png)

docs/feature_dip_switch.md

@@ -7,9 +7,17 @@ DIP switches are supported by adding this to your `rules.mk`:
 and this to your `config.h`:
 
 ```c
+// Connects each switch in the dip switch to the GPIO pin of the MCU
 #define DIP_SWITCH_PINS { B14, A15, A10, B9 }
 ```
 
+or
+
+```c
+// Connect each switch in the DIP switch to an unused intersections in the key matrix.
+#define DIP_SWITCH_MATRIX_GRID { {0,6}, {1,6}, {2,6} } // List of row and col pairs
+```
+
 ## Callbacks
 
 The callback functions can be inserted into your `<keyboard>.c`:
@@ -87,4 +95,10 @@ void dip_switch_update_mask_user(uint32_t state) {
 
 ## Hardware
 
+### Connects each switch in the dip switch to the GPIO pin of the MCU
+
 One side of the DIP switch should be wired directly to the pin on the MCU, and the other side to ground.  It should not matter which side is connected to which, as it should be functionally the same. 
+
+### Connect each switch in the DIP switch to an unused intersections in the key matrix.
+
+As with the keyswitch, a diode and DIP switch connect the ROW line to the COL line.

docs/feature_dynamic_macros.md

@@ -18,7 +18,7 @@ That should be everything necessary.
 
 To start recording the macro, press either `DYN_REC_START1` or `DYN_REC_START2`. 
 
-To finish the recording, press the `DYN_REC_STOP` layer button. 
+To finish the recording, press the `DYN_REC_STOP` layer button. You can also press `DYN_REC_START1` or `DYN_REC_START2` again to stop the recording.
 
 To replay the macro, press either `DYN_MACRO_PLAY1` or `DYN_MACRO_PLAY2`.
 

docs/feature_split_keyboard.md

@@ -90,6 +90,24 @@ You can configure the firmware to read a pin on the controller to determine hand
 
 This will read the specified pin. If it's high, then the controller assumes it is the left hand, and if it's low, it's assumed to be the right side. 
 
+#### Handedness by Matrix Pin
+
+You can configure the firmware to read key matrix pins on the controller to determine handedness.  To do this, add the following to your `config.h` file:
+
+```c
+#define SPLIT_HAND_MATRIX_GRID D0, F1
+```
+
+The first pin is the output pin and the second is the input pin.
+
+Some keyboards have unused intersections in the key matrix. This setting uses one of these unused intersections to determine the handness.
+
+Normally, when a diode is connected to an intersection, it is judged to be left. If you add the following definition, it will be judged to be right.
+
+```c
+#define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT
+```
+
 #### Handedness by EEPROM
 
 This method sets the keyboard's handedness by setting a flag in the persistent storage (`EEPROM`).  This is checked when the controller first starts up, and determines what half the keyboard is, and how to orient the keyboard layout. 

docs/ja/coding_conventions_c.md

@@ -0,0 +1,63 @@
+# コーディング規約 (C)
+
+<!---
+  original document: 0.9.19:docs/coding_conventions_c.md
+  git diff 0.9.19 HEAD -- docs/coding_conventions_c.md | cat
+-->
+
+私たちのスタイルのほとんどはかなり理解しやすいですが、現時点では完全に一貫しているわけではありません。変更箇所周辺のコードのスタイルと一致させる必要がありますが、そのコードに一貫性が無い場合や不明瞭な場合は以下のガイドラインに従ってください:
+
+* 4つのスペース (ソフトタブ) を使ってインデントします。
+* 修正版 One True Brace Style を使います。
+   * 開き括弧: ブロックを開始する文と同じ行の最後
+   * 閉じ括弧: ブロックを開始した文と同じ字下げ
+   * Else If: 行の先頭に閉じ括弧を置き、次の開き括弧を同じ行の最後に置きます。
+   * 省略可能な括弧: 常に括弧を付け加えます。
+      * 良い: if (condition) { return false; }
+      * 悪い: if (condition) return false;
+* C 形式のコメントの使用を推奨します: `/* */`
+   * コメントを機能を説明するストーリーと考えて下さい。
+   * 特定の決定がなされた理由を充分なコメントで説明してください。
+   * 分かり切ったコメントは書かないでください。
+   * 分かり切ったコメントであるか確信できない場合は、コメントを含めてください。
+* 一般的に、行を折り返さないで、必要なだけ長くすることができます。行を折り返すことを選択した場合は、76列を超えて折り返さないでください。
+* 古い形式のインクルードガード (`#ifndef THIS_FILE_H`、`#define THIS_FILE_H`、...、`#endif`) ではなく、ヘッダファイルの先頭で `#pragma once` を使います。
+* プリプロセッサ if の両方の形式を受け付けます: `#ifdef DEFINED` と `#if defined(DEFINED)`
+   * どちらがいいかわからない場合は、`#if defined(DEFINED)` 形式を使ってください。
+   * 複数の条件 `#if` に移行する場合を除き、既存のコードを別のスタイルに変更しないでください。
+* プリプロセッサディレクティブをインデントする方法(あるいはするかどうか)を決定する時は、以下の事に留意してください:
+   * 一貫性よりも読みやすさが重要です。
+   * ファイルの既存のスタイルに従ってください。ファイルのスタイルが混在している場合は、修正しようとしているセクションに適したスタイルに従ってください。
+   * インデントする時は、ハッシュを行の先頭に置き、`#` と `if` の間に空白を追加します。`#` の後ろに4つスペースを入れて開始します。
+   * 周りの C コードのインデントレベルに従うか、プリプロセッサのディレクティブに独自のインデントレベルを設定することができます。コードの意図を最もよく伝えるスタイルを選択してください。
+
+わかりやすいように例を示します:
+
+```c
+/* Enums for foo */
+enum foo_state {
+    FOO_BAR,
+    FOO_BAZ,
+};
+
+/* Returns a value */
+int foo(void) {
+    if (some_condition) {
+        return FOO_BAR;
+    } else {
+        return -1;
+    }
+}
+```
+
+# clang-format を使った自動整形
+
+[Clang-format](https://clang.llvm.org/docs/ClangFormat.html) は LLVM の一部で、誰もが手動で整形するほど暇ではないため、コードを自動整形することができます。私たちは、上記のコーディング規約のほとんどを適用する設定ファイルを提供しています。空白と改行のみを変更するため、省略可能な括弧は自分で付け加えることを忘れないでください。
+
+Windows で clang-format を入手するには [full LLVM インストーラ](http://llvm.org/builds/)を使い、Ubuntu では `sudo apt install clang-format` を使ってください。
+
+コマンドラインから実行する場合、オプションとして `-style=file` を渡すと、QMK ルートディレクトリ内の .clang-format 設定ファイルを自動的に見つけます。
+
+VSCode を使う場合は、標準の C/C++ プラグインが clang-format をサポートしますが、その他にも [独立した拡張機能](https://marketplace.visualstudio.com/items?itemName=LLVMExtensions.ClangFormat) があります。
+
+幾つかのコード (LAYOUT マクロのような)が clang-format によって破壊されるため、これらのファイルで clang-format を実行しないか、整形したくないコードを `// clang-format off` と `// clang-format on` で囲みます。

docs/reference_glossary.md

@@ -41,7 +41,7 @@ A macro which has been recorded on the keyboard and which will be lost when the
 ## Eclipse
 An IDE that is popular with many C developers.
 
-* [Eclipse Setup Instructions](eclipse.md)
+* [Eclipse Setup Instructions](other_eclipse.md)
 
 ## Firmware
 The software that controls your MCU.

docs/reference_keymap_extras.md

@@ -22,6 +22,7 @@ To use these, simply `#include` the corresponding [header file](https://github.c
 |Estonian                   |`keymap_estonian.h`             |
 |Finnish                    |`keymap_finnish.h`              |
 |French                     |`keymap_french.h`               |
+|French (AFNOR)             |`keymap_french_afnor.h`         |
 |French (BÉPO)              |`keymap_bepo.h`                 |
 |French (Belgium)           |`keymap_belgian.h`              |
 |French (Switzerland)       |`keymap_fr_ch.h`                |

docs/tap_hold.md

@@ -32,6 +32,7 @@ uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) {
             return 130;
         default:
             return TAPPING_TERM;
+    }
 }
 ```
 

drivers/issi/is31fl3741.c

@@ -272,6 +272,8 @@ void IS31FL3741_update_led_control_registers(uint8_t addr, uint8_t index) {
         for (int i = 0; i < 171; ++i) {
             IS31FL3741_write_register(addr, i, g_scaling_registers[0][180 + i]);
         }
+
+        g_scaling_registers_update_required[index] = false;
     }
 }
 

keyboards/1upkeyboards/1up60rgb/1up60rgb.h

@@ -2,77 +2,78 @@
 
 #include "quantum.h"
 
-#define LAYOUT_all( \
+#define XXX KC_NO
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
-) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214 }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
-	{ K400,  K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, K413,  K414 }  \
-}
 
+#define LAYOUT_all( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
+    k40, k41,      k43,           k46,                k4A, k4B,      k4D, k4E \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
+    { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
+}
 
 /* ANSI variant. No extra keys for ISO */
 #define LAYOUT_60_ansi( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K013, \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C,      k2E, \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,             K313, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+    k40, k41,      k43,           k46,                k4A, k4B,      k4D, k4E \
-) LAYOUT_all( \
+) { \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K013,\
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, XXX }, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, XXX, k2E }, \
-	K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, KC_NO,\
+    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, XXX }, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+    { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
-)
+}
 
 /* ISO variant. Remove useless ANSI keys */
 #define LAYOUT_60_iso( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K013, \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,             K313, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+    k40, k41,      k43,           k46,                k4A, k4B,      k4D, k4E \
-) LAYOUT_all( \
+) { \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K013,\
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, XXX }, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K214, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, XXX }, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, KC_NO,\
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, XXX }, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+    { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
-)
+}
 
 /* HHKB Variant */
 #define LAYOUT_60_ansi_split_bs_rshift( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C,      k2E, \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+    k40, k41,      k43,           k46,                k4A, k4B,      k4D, k4E  \
-) LAYOUT_all( \
+) { \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014,\
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, XXX, k2E }, \
-	K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,\
+    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
+    { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
-)
+}
 
 /* HHKB Variant */
 #define LAYOUT_60_hhkb( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C,      k2E, \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
-	            K401, K403,             K406,                   K411, K413                    \
+         k41,      k43,           k46,                     k4B,      k4D \
-) LAYOUT_all( \
+) { \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, XXX, k2E }, \
-	K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
-	KC_NO,K401,       K403,             K406,                   KC_NO,K411,       K413, KC_NO \
+    { XXX, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4B, XXX, k4D, XXX } \
-)
+}

keyboards/4pplet/steezy60/rev_a/config.h

@@ -12,7 +12,7 @@
 
 /* key matrix size */
 #define MATRIX_ROWS 5
-#define MATRIX_COLS 15
+#define MATRIX_COLS 14
 // ROWS: Top to bottom, COLS: Left to right
 #define MATRIX_ROW_PINS {C2,D0,B0,C7,C5}
 #define MATRIX_COL_PINS {C4,C6,B7,B6,B5,B4,B3,B2,B1,D6,D5,D4,D2,D1}

keyboards/acheron/shark/keymaps/ajp10304/readme.md

@@ -0,0 +1,118 @@
+# AJP10304 Custom Shark Layout
+# Also available for the Planck, JJ40 and Atreus50
+
+**Note:** In the tables below where there are two characters on a key,
+the second is the output when shift is applied.
+
+**Note:** The below tables assume a UK layout.
+
+#### Flashing
+
+`make acheron/shark:ajp10304:flash`
+
+##### Main Qwerty Layer
+
+* Tab: when held, operates as shift.
+* Enter: when held, operates as shift.
+* MENU: perform right-click
+
+|      |      |      |      |      |      |      |      |      |      |      |      |
+| ---- |:----:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| ----:|
+| Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+| Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |  ;:  | Enter|
+| Shft |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |  ,<  |  .>  |  /?  | Shft |
+| Fn   | Ctrl | Alt  | GUI  |Lower | Bksp |Space |Raise | Shift| MENU | Ctrl | Fn2  |
+
+##### Function Layer
+Activated when `fn` held in the above `qwerty` layer.
+
+|       |      |      |      |      |      |      |      |      |      |      |      |
+| :---: |:----:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:|
+|  F1   |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+|  1!   |  2"  |  3£  |  4$  |  5%  |  6^  |  7&  |  8*  |  9(  |  0)  |  ~   |INSERT|
+| Shift |  \|  |  `¬  |  #~  |   *  |  -_  |  =+  |  \|  |  [{  |  ]}  |  '@  |Shift |
+| Fn    | Ctrl | Alt  | GUI  |Lower | Bksp |Space |Mouse | MENU | Alt  | Ctrl | Fn2  |
+
+##### Lower Layer
+Activated when `Lower` is held in the above `qwerty` layer.
+
+* Numbers are along the top row, their shifted counterparts are on row 2.
+* WrdBks: `backspace` with `ctrl` applied. I.e. delete a word.
+* WrdDel: `delete` with `ctrl` applied. I.e. forward delete a word.
+
+|       |      |      |      |      |      |      |      |      |      |      |      |
+| :---: |:----:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:|
+|  1!   |  2"  |  3£  |  4$  |  5%  |  6^  |  7&  |  8*  |  9(  |  0)  | DEL  | Bksp |
+|  !    |   "  |   £  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |WrdDel|WrdBks|
+| Shift |  \|  |  `¬  |  #~  |  '@  |  -_  |  =+  |  #~  |  [{  |  ]}  |  '@  |Shift |
+|       |      |      |      |Lower | Del  |Space |      | Next | Vol- | Vol+ | Play |
+
+##### Raise Layer
+Activated when `Raise` is held in the above `qwerty` layer.
+
+* Preferred layer for typing brackets.
+* Allows for cursor navigation to be used solely with the right hand.
+* WRDSEL: Select the word where the cursor is.
+* |< and >|: Apply `ctrl` to `left` and `right` respectively for word jumping.
+
+|       |      |      |      |      |      |       |      |      |      |       |      |
+| :---: |:----:| :---:| :---:| :---:| :---:| :---: | :---:| :---:| :---:| :---: | :---:|
+|   `   |      |WRDSEL|  [   |   ]  |      |       | PGUP | HOME |PGDOWN|       |PRNTSC|
+|   `   |      |      |  (   |   )  |      |       | HOME |  UP  | END  |       |ZOOM +|
+|       |      |      |  {   |   }  |      |&#124;<| LEFT | DOWN |RIGHT |>&#124;|ZOOM -|
+| Mouse |      |      |      |      |  Alt | Enter |Raise |      |      |       |      |
+
+##### Lower + Raise
+Activated when `Lower` and `Raise` are held together in the above `qwerty` layer.
+
+* Audio controls in the same position as cursor keys from the `Raise` layer.
+* ????: Runs a macro for outputting a text string.  Do not use this store passwords.
+* Reset: Enter bootloader for flashing firmware to the keyboard.
+* CAPS: Toggle caps lock.
+* Macro functions: Allows recording of macros.  To start recording the macro, press either REC1 or REC2. 
+To finish the recording, press STOP. To replay the macro, press either PLAY1 or PLAY2.
+* MAC: Toggle MAC OS extensions to layers. This allows MLWR to be enabled with LOWER,
+MRSE with RAISE, MFNC with FUNC and MFNC2 with FUNC2 respectively.
+
+|       |      |      |      |      |      |      |      |      |      |      |      |
+| :---: |:----:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:|
+| ????  | Reset|Qwerty|      |      | REC1 | REC2 |      |      |      |      |  Del |
+| CAPS  |      |      |      |      | PLAY1|PLAY2 | Mute | Vol+ | Play |      |      |
+| MAC   |      |      |      |      | STOP1|STOP2 | Prev | Vol- | Next |      |      |
+|       |      |      |      |      |      |      |      | DYN  |      |      |      |
+
+##### Function 2 Layer
+Activated when `fn` held in the above `qwerty` layer.
+* WRDSEL: Select the word where the cursor is.
+* LNDEL: Delete the line where the cursor is.
+* LNSEL: Select the line where the cursor is.
+* DUP: Duplicate the selected text.
+* LNJOIN: Join the line where the cursor is with the following line.
+* MODE: Print either `PC` or `OSX` depending on what layer mode is active.
+
+|       |      |      |      |      |      |      |      |      |      |      |      |
+| :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:|
+|       |      |WRDSEL|      |      |      | LNDEL|      |      |      |      |      |
+|       |      | LNSEL| DUP  |      |      |      |      |LNJOIN|      |      |      |
+|       | UNDO | CUT  | COPY | PASTE|      |      |      |      |      |      | MODE |
+|       |      |      |      |      |      |      |      |      |      |      |      |
+
+##### Mouse Layer
+Activated when `fn` and `raise` held together.
+
+|       |      |      |      |      |      |      |      |      |      |      |      |
+| :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:|
+| ESC   |      |      |      |      |      |      |      | BTN3 |      |      |      |
+| ACC0  | ACC1 | ACC2 |      |      |      |      | BTN1 |  UP  | BTN2 |      |      |
+| ACC0  | ACC1 | ACC2 |      |      |      |      | LEFT | DOWN | RIGHT|      |      |
+|       |      |      |      |      |      |      |      |      |      |      |      |
+
+##### Number Pad Layout
+Activated when holding `Esc` key.
+
+|       |      |      |      |      |      |      |      |      |      |      |      |
+| :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:|
+|       |      |      |      |      |      |NMLOCK|   7  |   8  |   9  |   /  |      |
+|       |      |      |      |      |      |      |   4  |   5  |   6  |   *  |      |
+|       |      |      |      |      |      |      |   1  |   2  |   3  |   +  |      |
+|       |      |      |      |      |      |      |   0  |   .  |   ,  |   -  |      |

keyboards/aos/tkl/config.h

@@ -53,4 +53,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     #define RGBLIGHT_HUE_STEP 8
     #define RGBLIGHT_SAT_STEP 8
     #define RGBLIGHT_VAL_STEP 8
+    #define RGBLIGHT_LIMIT_VAL 50
 #endif

keyboards/centromere/centromere.h

@@ -45,3 +45,5 @@
     { KC_NO, KC_NO, k32, k33, k34, k35, k36, k37, KC_NO, KC_NO }, \
     { KC_NO, KC_NO, k2a, k1a, k0a, k0b, k1b, k2b, KC_NO, KC_NO }  \
   }
+
+#define LAYOUT_split_3x6_3 LAYOUT

keyboards/centromere/rules.mk

@@ -40,3 +40,5 @@ OPT_DEFS += -DCENTROMERE_PROMICRO
 
 # # project specific files
 SRC = matrix.c
+
+LAYOUTS = split_3x6_3

keyboards/chili/README.md

@@ -0,0 +1,15 @@
+# YDKB Chili
+
+[Chili PCB](https://i.imgur.com/fKi896a.jpg)
+
+The YDKB Chili is a Cherry G80-3000 replacement PCB utilizing the ATmega32U4 microcontroller.
+
+* Keyboard Maintainer: QMK community
+* Hardware Supported: YDKB Chili
+* Hardware Availability: [TaoBao](https://item.taobao.com/item.htm?id=565823984744)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make chili:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/chili/chili.c

@@ -0,0 +1,42 @@
+/* Copyright 2017 Mathias Andersson <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "chili.h"
+
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+    led_init_ports();
+    matrix_init_user();
+}
+
+void led_init_ports(void) {
+    setPinOutput(B1);
+    writePinHigh(B1);
+    setPinOutput(B2);
+    writePinHigh(B2);
+    setPinOutput(B3);
+    writePinHigh(B3);
+}
+
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        writePin(B1, !led_state.num_lock);
+        writePin(B2, !led_state.caps_lock);
+        writePin(B3, !led_state.scroll_lock);
+    }
+    return res;
+}

keyboards/chili/chili.h

@@ -0,0 +1,39 @@
+/* Copyright 2017 Mathias Andersson <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    K00,    K01, K02, K03, K04,    K05, K06, K07, K08,     K09, K69, K68, K67,   K66, K65, K64,                       \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K79, K78, K77, K76, K75,   K74, K73, K72,   K63, K62, K61, K60, \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K89, K88, K87,   K86,   K85, K84, K83,   K82, K81, K80, K90, \
+    K30,      K31, K32, K33, K34, K35, K36, K37, K38, K39, K99, K98,      K97,                    K95, K92, K71, K70, \
+    K40, K41,   K42, K43, K44, K45, K46, K47, K48, K49, KA9, KA8,    KA6, KA7,        K96,        K94, K93, K91, KA0, \
+    K50,  K51,  K52,               K53, K54,            K55,  K56,  K57,  K58,   K59, KA5, KA4,   KA3, KA2, KA1       \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39 }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49 }, \
+    { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59 }, \
+    { K60, K61, K62, K63, K64, K65, K66, K67, K68, K69 }, \
+    { K70, K71, K72, K73, K74, K75, K76, K77, K78, K79 }, \
+    { K80, K81, K82, K83, K84, K85, K86, K87, K88, K89 }, \
+    { K90, K91, K92, K93, K94, K95, K96, K97, K98, K99 }, \
+    { KA0, KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8, KA9 }  \
+}

keyboards/chili/config.h

@@ -0,0 +1,179 @@
+/*
+Copyright 2012 Jun Wako <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5945 // "YE"
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    YDKB
+#define PRODUCT         Chili
+#define DESCRIPTION     QMK keyboard firmware for Chili, a G80-3000 replacement PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 11
+#define MATRIX_COLS 10
+
+// ROWS: Top to bottom, COLS: Left to right
+/* Row pin configuration
+*/
+#define MATRIX_ROW_PINS { F5, F4, F1, F0, E6, B0, D5, D3, D2, D1, D0 }
+/* Column pin configuration
+ */
+#define MATRIX_COL_PINS { D4, F6, F7, C7, C6, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+/* Underlight configuration
+ */
+#define RGB_DI_PIN B3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 30     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 5
+#define RGBLIGHT_SAT_STEP 10
+#define RGBLIGHT_VAL_STEP 10
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1

keyboards/chili/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "YDKB Chili", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 22.5, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backsp", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"x":21.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":3}, {"x":6.75, "y":5.5, "w":3}, {"label":"Alt", "x":9.75, "y":5.5, "w":1.5}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5}, {"x":19.5, "y":5.5}, {"label":".", "x":20.5, "y":5.5}]
+        }
+    }
+}

keyboards/chili/keymaps/default/keymap.c

@@ -0,0 +1,35 @@
+/* Copyright 2017 Mathias Andersson <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+//Layers
+
+enum {
+  BASE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [BASE] = LAYOUT_all(
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_NO,              KC_INS,  KC_HOME, KC_PGUP,     KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_TAB,    KC_Q,     KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC, KC_RBRC,      KC_BSLS,            KC_DEL,  KC_END,  KC_PGDN,     KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+    KC_CAPS,      KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,              KC_ENT,                                            KC_P4,   KC_P5,   KC_P6,   KC_NO,
+    KC_LSFT, KC_NO,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,             KC_NO, KC_RSFT,                     KC_UP,                KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_NO, KC_SPC,                               KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,   KC_NO,   KC_PDOT
+  ),
+ 
+};

keyboards/chili/keymaps/via/keymap.c

@@ -0,0 +1,61 @@
+/* Copyright 2017 Mathias Andersson <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+//Layers
+
+enum {
+  BASE = 0,
+  FUNCTION,
+  ALTERNATE,
+  LAST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [BASE] = LAYOUT_all(
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_NO,              KC_INS,  KC_HOME, KC_PGUP,     KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_TAB,    KC_Q,     KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC, KC_RBRC,      KC_BSLS,            KC_DEL,  KC_END,  KC_PGDN,     KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+    KC_CAPS,      KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,              KC_ENT,                                            KC_P4,   KC_P5,   KC_P6,   KC_NO,
+    KC_LSFT, KC_NO,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,             KC_NO, KC_RSFT,                     KC_UP,                KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_NO, KC_SPC,                               KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,   KC_NO,   KC_PDOT
+  ),
+  [FUNCTION] = LAYOUT_all(
+    _______,           _______,   _______,   _______,   _______,       _______,   _______,   _______,   _______,        _______,   _______,  _______,  _______,             _______, _______, _______,
+    _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,  _______, _______,              _______,  _______, _______,     _______, _______, _______, _______,
+    _______,    _______,     _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,     _______, _______,      _______,            _______,  _______,  _______,     _______,   _______,   _______,   _______,
+    _______,      _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,              _______,                                            _______,   _______,   _______,   _______,
+    _______, _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,  _______,             _______, _______,                     _______,                _______,   _______,   _______,   _______,
+    _______, _______, _______,                            _______, _______,                               _______, _______, _______,  _______,            _______, _______, _______,     _______,   _______,   _______
+  ),
+  [ALTERNATE] = LAYOUT_all(
+    _______,           _______,   _______,   _______,   _______,       _______,   _______,   _______,   _______,        _______,   _______,  _______,  _______,             _______, _______, _______,
+    _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,  _______, _______,              _______,  _______, _______,     _______, _______, _______, _______,
+    _______,    _______,     _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,     _______, _______,      _______,            _______,  _______,  _______,     _______,   _______,   _______,   _______,
+    _______,      _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,              _______,                                            _______,   _______,   _______,   _______,
+    _______, _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,  _______,             _______, _______,                     _______,                _______,   _______,   _______,   _______,
+    _______, _______, _______,                            _______, _______,                               _______, _______, _______,  _______,            _______, _______, _______,     _______,   _______,   _______
+  ),
+  [LAST] = LAYOUT_all(
+    _______,           _______,   _______,   _______,   _______,       _______,   _______,   _______,   _______,        _______,   _______,  _______,  _______,             _______, _______, _______,
+    _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,  _______, _______,              _______,  _______, _______,     _______, _______, _______, _______,
+    _______,    _______,     _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,     _______, _______,      _______,            _______,  _______,  _______,     _______,   _______,   _______,   _______,
+    _______,      _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,              _______,                                            _______,   _______,   _______,   _______,
+    _______, _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,  _______,             _______, _______,                     _______,                _______,   _______,   _______,   _______,
+    _______, _______, _______,                            _______, _______,                               _______, _______, _______,  _______,            _______, _______, _______,     _______,   _______,   _______
+  ),
+};

keyboards/chili/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/chili/rules.mk

@@ -0,0 +1,31 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/crkbd/rev1/rev1.h

@@ -52,3 +52,5 @@
                                             KC_##L30, KC_##L31, KC_##L32, KC_##R30, KC_##R31, KC_##R32 \
   )
 // clang-format on
+
+#define LAYOUT_split_3x6_3 LAYOUT

keyboards/crkbd/rev1/rules.mk

@@ -1,3 +1,5 @@
 SRC += 	matrix.c \
 		split_util.c \
 		split_scomm.c
+
+LAYOUTS = split_3x6_3

keyboards/dp60/config.h

@@ -11,7 +11,7 @@
 #define PRODUCT_ID      0x00BE
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    astro
-#define PRODUCT         Dumplings
+#define PRODUCT         DP60
 #define DESCRIPTION     60% rgb keyboard with ble extension
 
 /* key matrix size */

keyboards/dp60/dp60.h

@@ -9,6 +9,49 @@
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
+    // Matrix layout to accomodate all layouts. Good for VIA mapping correctly, and it doesnt exist yet
+    //
+    //┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐  ┌──────┐
+    //│0A││0B││0C││0D││0E││0F││0G││4H││0H││0I││0J││0K││0L││0M││0N│  │  0N  │      split backspace support
+    //└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘  └──────┘
+    // 00  01  02  03  04  05  06  07  08  09  0a  0b  0c  0d  0e      0e
+    //┌────┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌────┐    ┌────┐
+    //│1A  ││1B││1C││1D││1E││1F││1G││1H││1I││1J││1K││1L││1M││1N  │    │    │      iso enter - see below
+    //└────┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└────┘    └────┘
+    //  10   11  12  13  14  15  16  17  18  19  1a  1b  1c   1e
+    //┌─────┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌───────┐  ┌──┐┌──┐
+    //│ 2A  ││2B││2C││2D││2E││2F││2G││2H││2I││2J││2K││2L││  2N   │  │2M││2N│      iso enter
+    //└─────┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└───────┘  └──┘└──┘
+    // 20     22  23  24  25  26  27  28  29  2a  2b  2c    2e       2d  2e
+    //┌───────┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌─────────┐
+    //│3A │ 3B││3C││3D││3E││3F││3G││3H││3I││3J││3K││3L││  3M  │3N│                split shifts (left and right)
+    //└───────┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└─────────┘
+    // 30   31  32  33  34  35  36  37  38  39  3a  3b    3c   3d
+    //┌───┐┌───┐┌───┐┌───────────────────────┐┌───┐┌───┐┌───┐┌───┐
+    //│4A ││4B ││4C ││         4G            ││4K ││4L ││4M ││4N │                wkl/hhkb use 4L (k49), 4M (k4a) , 4N (k4b)
+    //└───┘└───┘└───┘└───────────────────────┘└───┘└───┘└───┘└───┘
+    // 40   42   43            47              48   49   4a   4b
+    //end of mapping
+//
+//added k0d
+//added k2d KC_NUMS for iso
+//added k31 split l-shift, k3d split r-shift
+
+#define LAYOUT_all( \
+  k00,  k01,  k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+k10,    k11,  k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,      k1e, \
+k20,          k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
+k30,    k31,  k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+k40,          k42, k43,                k47, k48, k49, k4a, k4b       \
+) \
+{ \
+  {k00,   k01,  k02, k03,   k04,   k05,   k06,                          k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+  {k10,   k11,  k12, k13,   k14,   k15,   k16, k17,                     k18, k19, k1a, k1b, k1c,      k1e}, \
+  {k20,         k22, k23,   k24,   k25,   k26, k27,                     k28, k29, k2a, k2b, k2c, k2d, k2e}, \
+  {k30,   k31,  k32, k33,   k34,   k35,   k36, k37,                     k38, k39, k3a, k3b, k3c, k3d}, \
+  {k40,         k42, k43, KC_NO, KC_NO, KC_NO, k47, k07, KC_NO, KC_NO,  k48, k49, k4a, k4b}  \
+}
+
 #define LAYOUT_60_ansi( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
@@ -28,7 +71,7 @@
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
 	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
-	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c,\
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
 	k40,      k42, k43,                k47, k48, k49, k4a, k4b       \
 ) \
 { \

keyboards/dp60/keymaps/via/keymap.c

@@ -1,31 +1,31 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_60_ansi_split_bs_rshift(
+    [0] = LAYOUT_all(
-      KC_ESC,      KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_DEL, KC_BSPC,
+      KC_ESC,       KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_DEL, KC_BSPC,
-      KC_TAB,      KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,
+      KC_TAB,         KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,
-      KC_CAPS,    KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,        KC_ENT,
+      KC_CAPS,          KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT, KC_NUHS,  KC_ENT,
-      KC_LSFT,     KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,  KC_RSFT,   MO(1),
+      KC_LSFT, KC_NUBS,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,  KC_RSFT,   MO(1),
-      KC_LCTL,  KC_LGUI,  KC_LALT,                        KC_SPC,                  KC_RALT,KC_RGUI,  TG(1),   KC_RCTL),
+      KC_LCTL,  KC_LGUI,  KC_LALT,                        KC_SPC,                  KC_RGUI,KC_RALT,  MO(1),   KC_RCTL),
-      
-    [1] = LAYOUT_60_ansi_split_bs_rshift(
-      _______, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_PSCR,
-      RESET,   RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,
-      _______,        _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN, KC_UP,KC_RIGHT,KC_HOME,KC_END,_______,
-      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
-      _______,_______,_______,                        _______,                        _______,_______,TG(0),_______),
 
-    [2] = LAYOUT_60_ansi_split_bs_rshift(
+    [1] = LAYOUT_all(
+      KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_DEL,
+      RESET,   _______,KC_UP,_______,_______,_______,_______,_______,KC_PAUS,KC_SLCK,KC_PSCR,KC_PGUP,_______,KC_INS,
+      _______,        KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______, _______,_______,KC_HOME,KC_END,_______, _______,
+      _______,_______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGDN,_______,_______,
+      _______,_______,_______,                        _______,                        _______,MO(2),TG(0),_______),
+
+    [2] = LAYOUT_all(
+      _______, _______,_______,  _______,_______,  _______,_______,  _______,_______,  _______,_______, _______,_______,_______,_______,
+      _______,   _______,KC_VOLU,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+      KC_MUTE,        KC_MPRV,KC_VOLD,KC_MNXT,_______,_______,_______,_______, _______,_______,_______,_______,_______, _______,
+      _______, _______,       RGB_TOG,RGB_MOD,RGB_RMOD,RGB_VAI,RGB_VAD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,_______,_______,_______,
+      _______,_______,_______,                        KC_MPLY,                        _______,_______,_______,_______),
+
+    [3] = LAYOUT_all(
       _______, _______,_______,  _______,_______,  _______,_______,  _______,_______,  _______,_______, _______,_______,_______,_______,
       _______,   _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
-      _______,        _______,_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,
+      _______,        _______,_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
-      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+      _______, _______,       _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
-      _______,_______,_______,                        _______,                        _______,_______,_______,_______),
+      _______,_______,_______,                        _______,                        _______,_______,_______,_______)
-
+};
-    [3] = LAYOUT_60_ansi_split_bs_rshift(
-      _______, _______,_______,  _______,_______,  _______,_______,  _______,_______,  _______,_______, _______,_______,_______,_______,
-      _______,   _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
-      _______,        _______,_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,
-      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
-      _______,_______,_______,                        _______,                        _______,_______,_______,_______)    
-};

keyboards/dp60/keymaps/via/rules.mk

@@ -1,2 +1,3 @@
 VIA_ENABLE = yes
 LTO_ENABLE = yes
+RGBLIGHT_ENABLE = yes #enables underglow, but will not disable per key leds

keyboards/dp60/rules.mk

@@ -22,14 +22,14 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no # USB Nkey Rollover
+NKRO_ENABLE = yes # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-#RGBLIGHT_ENABLE = yes       # Use RGB underglow light
+RGBLIGHT_ENABLE = no        # Use RGB underglow light
 RGB_MATRIX_ENABLE = yes     # Use RGB matrix
 
 LAYOUTS = 60_ansi 60_hhkb 60_iso 60_ansi_split_bs_rshift

keyboards/ghs/rar/config.h

@@ -25,7 +25,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DEVICE_VER 0x0001
 #define MANUFACTURER Gone Hacking Studio
 #define PRODUCT GHS.RAR
-#define DESCRIPTION A 75 % keyboard
+#define DESCRIPTION A 75% keyboard
 
 /* key matrix size */
 #define MATRIX_ROWS 12

keyboards/ghs/rar/keymaps/default/keymap.c

@@ -24,19 +24,19 @@ enum layer_names {
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Base */
     [_BASE] = LAYOUT_ansi(
-        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
-        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME,
-        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
-        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,   KC_ENT,   KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGDN,
-        KC_LSFT,   KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,      KC_UP,    KC_END,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
-        KC_LCTL, KC_LGUI, KC_LALT,             KC_SPC,            KC_RALT,  MO(1),  KC_LEFT, KC_DOWN, KC_RGHT,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
     ),
     [_FN] = LAYOUT_ansi(
-        RGB_TOG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+        RGB_TOG,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-        KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_HUI,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_HUI,
-        KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_SAI,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_SAI,
-        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,     KC_NO,   RGB_SAD,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX, RGB_SAD,
-        KC_NO,     KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,      RGB_VAI,    RGB_HUD,
+        XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_VAI, RGB_HUD,
-        KC_NO, KC_NO, KC_NO,                  KC_NO,             KC_NO, _______,     RGB_MOD, RGB_VAD, RGB_RMOD,
+        XXXXXXX, XXXXXXX, XXXXXXX,                            XXXXXXX,                            XXXXXXX, _______, RGB_MOD, RGB_VAD, RGB_RMOD
     )
 };

keyboards/ghs/rar/keymaps/iso/keymap.c

@@ -24,19 +24,19 @@ enum layer_names {
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Base */
     [_BASE] = LAYOUT_iso(
-        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
-        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME,
-        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_ENT,  KC_PGUP,
-        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS,   KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS,          KC_PGDN,
-        KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP,  KC_END,
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
-        KC_LCTL, KC_LGUI, KC_LALT,             KC_SPC,            KC_RALT,  MO(1),  KC_LEFT, KC_DOWN, KC_RGHT,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
     ),
     [_FN] = LAYOUT_iso(
-        RGB_TOG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+        RGB_TOG,          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-        KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_HUI,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_HUI,
-        KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_SAI,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_SAI,
-        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,     KC_NO,   RGB_SAD,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,          RGB_SAD,
-        KC_NO,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,    RGB_VAI,   RGB_HUD,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_VAI, RGB_HUD,
-        KC_NO, KC_NO, KC_NO,                  KC_NO,             KC_NO, _______,       RGB_MOD, RGB_VAD, RGB_RMOD,
+        XXXXXXX, XXXXXXX, XXXXXXX,                            XXXXXXX,                            XXXXXXX, _______, RGB_MOD, RGB_VAD, RGB_RMOD
     )
 };

keyboards/ghs/rar/keymaps/via/keymap.c

@@ -18,35 +18,35 @@
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Base */
     [0] = LAYOUT_all(
-        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_DEL,
-        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, KC_HOME,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_NO,   KC_HOME,
-        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
-        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,   KC_ENT,   KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
-        KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,      KC_UP,    KC_END,
+        KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_END,
-        KC_LCTL, KC_LGUI, KC_LALT,             KC_SPC,            KC_RALT,  MO(1),  KC_NO, KC_LEFT, KC_DOWN, KC_RGHT,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_NO,   MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
     ),
     [1] = LAYOUT_all(
-        RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+        RGB_TOG,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RESET,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_SAI,
-        _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______,   RGB_SAD,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   RGB_SAD,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      RGB_VAI,   RGB_HUD,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_VAI, RGB_HUD,
-        _______, _______, _______,                  _______,             _______, _______,     _______, RGB_MOD, RGB_VAD, RGB_RMOD,
+        _______, _______, _______,                            _______,                            _______, _______, _______, RGB_MOD, RGB_VAD, RGB_RMOD
     ),
     [2] = LAYOUT_all(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
-        _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______,   _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______,   _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
-        _______, _______, _______,                  _______,             _______, _______,     _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______
     ),
     [3] = LAYOUT_all(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
-        _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______,   _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,      _______,   _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
-        _______, _______, _______,                  _______,             _______, _______,     _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______
     )
 };

keyboards/ghs/rar/rar.h

@@ -32,7 +32,7 @@
 #define LAYOUT_ansi( \
     k00,     k01, k11, k02, k12,   k03, k13, k04, k14,   k15, k06, k16,  k07,     k17, \
     k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26,    k36,      k37, \
-    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k56,   k47,     k57, \
+    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46,   k47,     k57, \
     k60,    k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75,     k76,       k77, \
     k80,      k81, k91, k82, k92, k83, k93, k84, k94, k85, k95,     k86,    k87,  k97, \
     ka0, kb0, ka1,                 ka3,               ka5,   ka6,      kb6, ka7, kb7 \
@@ -42,8 +42,8 @@
     { XXX, k11, k12, k13, k14, k15, k16, k17 }, \
     { k20, k21, k22, k23, k24, k25, k26, XXX }, \
     { k30, k31, k32, k33, k34, k35, k36, k37 }, \
-    { k40, k41, k42, k43, k44, k45, XXX, k47 }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47 }, \
-    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k50, k51, k52, k53, k54, k55, XXX, k57 }, \
     { k60, k61, k62, k63, k64, k65, XXX, XXX }, \
     { k70, k71, k72, k73, k74, k75, k76, k77 }, \
     { k80, k81, k82, k83, k84, k85, k86, k87 }, \
@@ -55,7 +55,7 @@
 #define LAYOUT_ansi_wkl( \
     k00,     k01, k11, k02, k12,   k03, k13, k04, k14,   k15, k06, k16,  k07,     k17, \
     k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26,    k36,      k37, \
-    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k56,   k47,     k57, \
+    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46,   k47,     k57, \
     k60,    k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75,     k76,       k77, \
     k80,      k81, k91, k82, k92, k83, k93, k84, k94, k85, k95,     k86,    k87,  k97, \
     ka0,   kb0,                    ka3,               ka5,   ka6,      kb6, ka7, kb7 \
@@ -65,8 +65,8 @@
     { XXX, k11, k12, k13, k14, k15, k16, k17 }, \
     { k20, k21, k22, k23, k24, k25, k26, XXX }, \
     { k30, k31, k32, k33, k34, k35, k36, k37 }, \
-    { k40, k41, k42, k43, k44, k45, XXX, k47 }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47 }, \
-    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k50, k51, k52, k53, k54, k55, XXX, k57 }, \
     { k60, k61, k62, k63, k64, k65, XXX, XXX }, \
     { k70, k71, k72, k73, k74, k75, k76, k77 }, \
     { k80, k81, k82, k83, k84, k85, k86, k87 }, \
@@ -78,7 +78,7 @@
 #define LAYOUT_iso( \
     k00,     k01, k11, k02, k12,   k03, k13, k04, k14,   k15, k06, k16,  k07,     k17, \
     k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26,    k36,      k37, \
-    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k56,   k47,     k57, \
+    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46,   k47,     k57, \
     k60,    k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76,           k77, \
     k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95,     k86,    k87,  k97, \
     ka0, kb0, ka1,                 ka3,               ka5,   ka6,      kb6, ka7, kb7 \
@@ -88,8 +88,8 @@
     { XXX, k11, k12, k13, k14, k15, k16, k17 }, \
     { k20, k21, k22, k23, k24, k25, k26, XXX }, \
     { k30, k31, k32, k33, k34, k35, k36, k37 }, \
-    { k40, k41, k42, k43, k44, k45, XXX, k47 }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47 }, \
-    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k50, k51, k52, k53, k54, k55, XXX, k57 }, \
     { k60, k61, k62, k63, k64, k65, XXX, XXX }, \
     { k70, k71, k72, k73, k74, k75, k76, k77 }, \
     { k80, k81, k82, k83, k84, k85, k86, k87 }, \
@@ -101,7 +101,7 @@
 #define LAYOUT_iso_wkl( \
     k00,     k01, k11, k02, k12,   k03, k13, k04, k14,   k15, k06, k16,  k07,     k17, \
     k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26,    k36,      k37, \
-    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k56,   k47,     k57, \
+    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46,   k47,     k57, \
     k60,    k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76,           k77, \
     k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95,     k86,    k87,  k97, \
     ka0,   kb0,                    ka3,               ka5,   ka6,      kb6, ka7, kb7 \
@@ -111,8 +111,8 @@
     { XXX, k11, k12, k13, k14, k15, k16, k17 }, \
     { k20, k21, k22, k23, k24, k25, k26, XXX }, \
     { k30, k31, k32, k33, k34, k35, k36, k37 }, \
-    { k40, k41, k42, k43, k44, k45, XXX, k47 }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47 }, \
-    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k50, k51, k52, k53, k54, k55, XXX, k57 }, \
     { k60, k61, k62, k63, k64, k65, XXX, XXX }, \
     { k70, k71, k72, k73, k74, k75, k76, k77 }, \
     { k80, k81, k82, k83, k84, k85, k86, k87 }, \
@@ -124,7 +124,7 @@
 #define LAYOUT_all( \
     k00,     k01, k11, k02, k12,   k03, k13, k04, k14,   k15, k06, k16,  k07,     k17, \
     k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27,    k37, \
-    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k56,   k47,     k57, \
+    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46,   k47,     k57, \
     k60,    k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75,     k76,       k77, \
     k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95,     k86,    k87,  k97, \
     ka0, kb0, ka1,                 ka3,               ka5, kb5, ka6,   kb6, ka7, kb7 \
@@ -134,8 +134,8 @@
     { XXX, k11, k12, k13, k14, k15, k16, k17 }, \
     { k20, k21, k22, k23, k24, k25, k26, k27 }, \
     { k30, k31, k32, k33, k34, k35, k36, k37 }, \
-    { k40, k41, k42, k43, k44, k45, XXX, k47 }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47 }, \
-    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k50, k51, k52, k53, k54, k55, XXX, k57 }, \
     { k60, k61, k62, k63, k64, k65, XXX, XXX }, \
     { k70, k71, k72, k73, k74, k75, k76, k77 }, \
     { k80, k81, k82, k83, k84, k85, k86, k87 }, \

keyboards/gowla/config.h

@@ -0,0 +1,38 @@
+/*
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xE9B6
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Gowla
+#define PRODUCT         Gowla Macro Board
+#define DESCRIPTION     3x3 PCB
+
+/* Matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/* Pin-out */
+#define MATRIX_ROW_PINS { D1, D0, D4 }
+#define MATRIX_COL_PINS { B5, B4, E6 }
+#define UNUSED_PINS
+
+/* ROW2COL */
+#define DIODE_DIRECTION ROW2COL

keyboards/gowla/gowla.c

@@ -0,0 +1 @@
+#include "gowla.h"

keyboards/gowla/gowla.h

@@ -0,0 +1,13 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_ortho_3x3( \
+      k00, k01, k02, \
+      k10, k11, k12, \
+      k20, k21, k22  \
+) { \
+    { k00, k01, k02 }, \
+    { k10, k11, k12 }, \
+    { k20, k21, k22 } \
+}

keyboards/gowla/info.json

@@ -0,0 +1,24 @@
+{
+    "keyboard_name": "Gowla Macro Pad",
+    "url": "https://github.com/SamGowland/Gowla-Macro-Board",
+    "maintainer": "Gowla",
+    "width": 3,
+    "height": 3,
+    "layouts": {
+        "LAYOUT_ortho_3x3": {
+            "layout": [
+                {"x": 0, "y": 0},
+                {"x": 1, "y": 0},
+                {"x": 2, "y": 0},
+
+                {"x": 0, "y": 1},
+                {"x": 1, "y": 1},
+                {"x": 2, "y": 1},
+
+                {"x": 0, "y": 2},
+                {"x": 1, "y": 2},
+                {"x": 2, "y": 2}
+            ]
+        }
+    }
+}

keyboards/gowla/keymaps/default/keymap.c

@@ -0,0 +1,14 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_ortho_3x3(
+        LT(1, KC_MPRV), KC_MNXT, KC_MPLY,
+        KC_VOLD,        KC_UP,   KC_VOLU,
+        KC_LEFT,        KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_ortho_3x3(
+        KC_ESC,  KC_MPLY, RESET,
+        KC_P7,   KC_P1,   KC_F1,
+        KC_F2,   KC_F3,   KC_F4
+    )
+};

keyboards/gowla/readme.md

@@ -0,0 +1,15 @@
+# Gowla Macro Board
+
+![Gowla](https://github.com/SamGowland/Gowla-Macro-Board/blob/master/Images/comp.jpg)
+
+Simple Compact 3x3 Macro Board for use with QMK, designed and sold by Gowla.
+
+* Keyboard Maintainer: [Gowla](https://github.com/SamGowland/)
+* Hardware Supported: Pro Micro ATmega32U4, Cherry Mount Switches
+* Hardware Availability: [Repo](https://github.com/SamGowland/Gowla-Macro-Board)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make gowla:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/gowla/rules.mk

@@ -0,0 +1,31 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/handwired/atreus50/atreus50.h

@@ -3,7 +3,7 @@
 
 #include "quantum.h"
 
-// The first section contains all of the arguements
+// The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
 #define LAYOUT( \
   k00, k01, k02, k03, k04, k05,           k06, k07, k08, k09, k0a, k0b, \

keyboards/handwired/atreus50/keymaps/ajp10304/keymap.c

@@ -1,39 +1,6 @@
 #include QMK_KEYBOARD_H
 #include "keymap_uk.h"
-
+#include "ajp10304.h"
-extern keymap_config_t keymap_config;
-
-enum planck_layers {
-  _QWERTY,
-  _MAC,
-  _LOWER,
-  _MLWR,
-  _RAISE,
-  _MRSE,
-  _FUNC,
-  _MFNC,
-  _FUNC2,
-  _MFNC2,
-  _ADJUST,
-  _MOUSE
-};
-
-enum planck_keycodes {
-  QWERTY = SAFE_RANGE,
-  MAC,
-  FUNC,
-  MFNC,
-  FUNC2,
-  MFNC2,
-  LOWER,
-  MLWR,
-  RAISE,
-  MRSE,
-  MOUSE,
-  DYNAMIC_MACRO_RANGE
-};
-
-#include "dynamic_macro.h"
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
@@ -49,7 +16,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-------------------------------------------------------------------------------------------------'
  */
 [_QWERTY] = LAYOUT(
-  KC_ESC,                KC_Q,       KC_W,        KC_E,      KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,      KC_O,      KC_P,       KC_BSPC              ,
+  LT(_NUMPAD, KC_ESC),   KC_Q,       KC_W,        KC_E,      KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,      KC_O,      KC_P,       KC_BSPC              ,
   MT(MOD_LSFT, KC_TAB),  KC_A,       KC_S,        KC_D,      KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,      KC_L,      KC_SCLN,    MT(MOD_RSFT, KC_ENT) ,
   KC_LSHIFT,             KC_Z,       KC_X,        KC_C,      KC_V,    KC_B,                      KC_N,    KC_M,    KC_COMM,   KC_DOT,    KC_SLSH,    KC_RSHIFT            ,
   MO(_FUNC),             KC_LCTL,    KC_LALT,     KC_LGUI,   LOWER,   KC_BSPC, KC_LCTL, KC_LALT, KC_SPC,  RAISE,   KC_LSHIFT, KC_BTN2,   KC_RCTL,    MO(_FUNC2)
@@ -103,10 +70,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-------------------------------------------------------------------------------------------------'
  */
 [_RAISE] = LAYOUT(
-  KC_GRV,     XXXXXXX, M(1),    KC_LBRC,       KC_RBRC,       XXXXXXX,                   XXXXXXX,       KC_PGUP,  KC_HOME,  KC_PGDOWN,  XXXXXXX,        KC_PSCREEN         ,
+  KC_GRV,     XXXXXXX, M_WORD_SEL, KC_LBRC,       KC_RBRC,       XXXXXXX,                   XXXXXXX,       KC_PGUP,  KC_HOME,  KC_PGDOWN,  XXXXXXX,        KC_PSCREEN         ,
-  KC_GRV,     XXXXXXX, XXXXXXX, LSFT(KC_9),    LSFT(KC_0),    XXXXXXX,                   XXXXXXX,       KC_HOME,  KC_UP,    KC_END,     XXXXXXX,        LCTL(LSFT(KC_EQL)) ,
+  KC_GRV,     XXXXXXX, XXXXXXX,    LSFT(KC_9),    LSFT(KC_0),    XXXXXXX,                   XXXXXXX,       KC_HOME,  KC_UP,    KC_END,     XXXXXXX,        LCTL(LSFT(KC_EQL)) ,
-  _______,    XXXXXXX, XXXXXXX, LSFT(KC_LBRC), LSFT(KC_RBRC), XXXXXXX,                   LCTL(KC_LEFT), KC_LEFT,  KC_DOWN,  KC_RIGHT,   LCTL(KC_RIGHT), LCTL(KC_MINS)      ,
+  _______,    XXXXXXX, XXXXXXX,    LSFT(KC_LBRC), LSFT(KC_RBRC), XXXXXXX,                   LCTL(KC_LEFT), KC_LEFT,  KC_DOWN,  KC_RIGHT,   LCTL(KC_RIGHT), LCTL(KC_MINS)      ,
-  MO(_MOUSE), _______, _______, _______,       _______,       KC_LALT, _______, _______, KC_ENT,        _______,  XXXXXXX,  _______,    _______,        _______
+  MO(_MOUSE), _______, _______,    _______,       _______,       KC_LALT, _______, _______, KC_ENT,        _______,  XXXXXXX,  _______,    _______,        _______
 ),
 
 /* Adjust (Lower + Raise)
@@ -121,7 +88,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-------------------------------------------------------------------------------------------------'
  */
 [_ADJUST] = LAYOUT(
-  M(0),     RESET,   QWERTY,  _______, _______, DYN_REC_START1,                    DYN_REC_START2,  _______,             _______,           _______,              _______,  KC_DEL  ,
+  M_CUSTOM, RESET,   QWERTY,  _______, _______, DYN_REC_START1,                    DYN_REC_START2,  _______,             _______,           _______,              _______,  KC_DEL  ,
   KC_CAPS,  _______, _______, _______, _______, DYN_MACRO_PLAY1,                   DYN_MACRO_PLAY2, KC_AUDIO_MUTE,       KC_AUDIO_VOL_UP,   KC_MEDIA_PLAY_PAUSE,  _______,  _______ ,
   TG(_MAC), _______, _______, _______, _______, DYN_REC_STOP,                      DYN_REC_STOP,    KC_MEDIA_PREV_TRACK, KC_AUDIO_VOL_DOWN, KC_MEDIA_NEXT_TRACK,  _______,  _______ ,
   _______,  _______, _______, _______, _______, _______,         _______, _______, _______,         _______,             _______,           _______,              _______,  _______
@@ -129,7 +96,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Mouse
  * ,------------------------------------------             |-----------------------------------------.
- * | ESC  |      |      |      |      |      |             |      |      |      |      |      |      |
+ * | ESC  |      |      |      |      |      |             |      |      | BTN3 |      |      |      |
  * |------+------+------+------+------+-------             |------+------+------+------+------+------|
  * | ACC0 | ACC1 | ACC2 |      |      |      |             |      | BTN1 |  UP  | BTN2 |      |      |
  * |------+------+------+------+------+------|             |------+------+------+------+------+------|
@@ -139,12 +106,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-------------------------------------------------------------------------------------------------'
  */
 [_MOUSE] = LAYOUT(
-    KC_ESC ,      _______,      _______,      _______, _______, _______,                   _______, _______,    _______,     _______,    _______, _______ ,
+    KC_ESC ,      _______,      _______,      _______, _______, _______,                   _______, _______,    KC_MS_BTN3, _______,    _______, _______ ,
     KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______,                   _______, KC_MS_BTN1, KC_MS_UP,   KC_MS_BTN2,  _______, _______ ,
     KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______,                   _______, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, _______, _______ ,
     _______,      _______,      _______,      _______, _______, _______, _______, _______, _______, _______,    _______,    _______,     _______, _______
 ),
 
+
+/* Num Pad
+ * ,------------------------------------------             |-----------------------------------------.
+ * | ESC  |      |      |      |      |      |             |NMLOCK|   7  |   8  |   9  |   /  |      |
+ * |------+------+------+------+------+-------             |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |             |      |   4  |   5  |   6  |   *  |      |
+ * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ * |      |      |      |      |      |      |             |      |   1  |   2  |   3  |   +  |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |   0  |   .  |   ,  |   -  |      |
+ * `-------------------------------------------------------------------------------------------------'
+ */
+[_NUMPAD] = LAYOUT(
+    _______, _______, _______, _______, _______, _______,                   KC_NLCK, KC_KP_7, KC_KP_8,   KC_KP_9,     KC_KP_SLASH,    _______,
+    _______, _______, _______, _______, _______, _______,                   _______, KC_KP_4, KC_KP_5,   KC_KP_6,     KC_KP_ASTERISK, _______,
+    _______, _______, _______, _______, _______, _______,                   _______, KC_KP_1, KC_KP_2,   KC_KP_3,     KC_KP_PLUS,     _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_KP_0, KC_KP_DOT, KC_COMM,     KC_KP_MINUS,    _______
+),
+
+
 /* Function 2 (Right hand side)
  * ,------------------------------------------             |-----------------------------------------.
  * |      |      |WRDSEL|      |      |      |             | LNDEL|      |      |      |      |      |
@@ -157,10 +144,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-------------------------------------------------------------------------------------------------'
  */
 [_FUNC2] = LAYOUT(
-    _______,  _______,    M(1),       _______,    _______,    _______,                   M(5),    _______, _______, _______, _______, _______,
+    _______,  _______,    M_WORD_SEL, _______,    _______,    _______,                   M_LINE_DEL,  _______, _______, _______, _______, _______,
-    _______,  _______,    M(3),       M(7),       _______,    _______,                   _______, M(10),   _______, _______, _______, _______,
+    _______,  _______,    M_LINE_SEL, M_DUP,      _______,    _______,                   _______,     M_JOIN,  _______, _______, _______, _______,
-    _______,  LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______,                   _______, _______, _______, _______, _______, M(98)  ,
+    _______,  LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______,                   _______,     _______, _______, _______, _______, M_MODE,
-    _______,  _______,    _______,    _______,    _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______
+    _______,  _______,    _______,    _______,    _______,    _______, _______, _______, _______,     _______, _______, _______, _______, _______
 ),
 
 [_MAC] = LAYOUT(
@@ -178,10 +165,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 ),
 
 [_MRSE] = LAYOUT(
-    _______,  _______,  M(2),    _______, _______, _______,                   _______,       _______,    _______, _______,    _______,        _______       ,
+    _______,  _______,  M_WORD_SEL_MAC, _______, _______, _______,                   _______,       _______,    _______, _______,    _______,        _______       ,
-    _______,  _______,  _______, _______, _______, _______,                   _______,       LCTL(KC_A), _______, LCTL(KC_E), _______,        LGUI(KC_EQL)  ,
+    _______,  _______,  _______,        _______, _______, _______,                   _______,       LCTL(KC_A), _______, LCTL(KC_E), _______,        LGUI(KC_EQL)  ,
-    _______,  _______,  _______, _______, _______, _______,                   LALT(KC_LEFT), _______,    _______, _______,    LALT(KC_RIGHT), LGUI(KC_MINS) ,
+    _______,  _______,  _______,        _______, _______, _______,                   LALT(KC_LEFT), _______,    _______, _______,    LALT(KC_RIGHT), LGUI(KC_MINS) ,
-    _______,  _______,  _______, _______, _______, _______, _______, _______, _______,       _______,    _______, _______,    _______,        _______
+    _______,  _______,  _______,        _______, _______, _______, _______, _______, _______,       _______,    _______, _______,    _______,        _______
 ),
 
 [_MFNC] = LAYOUT(
@@ -192,151 +179,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 ),
 
 [_MFNC2] = LAYOUT(
-    _______,  _______,    M(2),       _______,    _______,    _______,                   M(6),    _______, _______, _______, _______, _______,
+    _______,  _______,    M_WORD_SEL_MAC, _______,    _______,    _______,                   M_LINE_DEL_MAC, _______,    _______, _______, _______, _______,
-    _______,  _______,    M(4),       M(8),       _______,    _______,                   _______, M(10),   _______, _______, _______, _______,
+    _______,  _______,    M_LINE_SEL_MAC, M_DUP_MAC,  _______,    _______,                   _______,        M_JOIN_MAC, _______, _______, _______, _______,
-    _______,  LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), _______,                   _______, _______, _______, _______, _______, M(99)  ,
+    _______,  LGUI(KC_Z), LGUI(KC_X),     LGUI(KC_C), LGUI(KC_V), _______,                   _______,        _______,    _______, _______, _______, M_MODE_MAC,
-    _______,  _______,    _______,    _______,    _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______
+    _______,  _______,    _______,        _______,    _______,    _______, _______, _______, _______,        _______,    _______, _______, _______, _______
 )
 
 };
-
-void persistant_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-
-  if (!process_record_dynamic_macro(keycode, record)) {
-      return false;
-  }
-
-   switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        persistant_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-    case MLWR:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        layer_on(_MLWR);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        layer_off(_MLWR);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-    case MRSE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        layer_on(_MRSE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        layer_off(_MRSE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-    case MFNC:
-      if (record->event.pressed) {
-        layer_on(_FUNC);
-        layer_on(_MFNC);
-      } else {
-        layer_off(_FUNC);
-        layer_off(_MFNC);
-      }
-      return false;
-    case MFNC2:
-      if (record->event.pressed) {
-        layer_on(_FUNC2);
-        layer_on(_MFNC2);
-      } else {
-        layer_off(_FUNC2);
-        layer_off(_MFNC2);
-      }
-      return false;
-    }
-  return true;
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t keycode, uint8_t opt) {
-  // These would trigger when you hit a key mapped as M(0)
-  if (record->event.pressed) {
-    switch(keycode) {
-      case 0: // Some custom string here
-        SEND_STRING("");
-        return false;
-
-      case 1: // Word Select
-        SEND_STRING(SS_DOWN(X_LCTRL) SS_TAP(X_RIGHT) SS_DOWN(X_LSHIFT) SS_TAP(X_LEFT) SS_UP(X_LSHIFT) SS_UP(X_LCTRL));
-        return false;
-
-      case 2: // Word Select Mac
-        SEND_STRING(SS_DOWN(X_LALT) SS_TAP(X_RIGHT) SS_DOWN(X_LSHIFT) SS_TAP(X_LEFT) SS_UP(X_LSHIFT) SS_UP(X_LALT));
-        return false;
-
-      case 3: // Line Select
-        SEND_STRING(SS_TAP(X_HOME) SS_DOWN(X_LSHIFT) SS_TAP(X_END) SS_UP(X_LSHIFT));
-        return false;
-
-      case 4: // Line Select Mac
-        SEND_STRING(SS_LCTRL("a") SS_DOWN(X_LSHIFT) SS_LCTRL("e") SS_UP(X_LSHIFT));
-        return false;
-
-      case 5: // Line Delete
-        SEND_STRING(SS_TAP(X_HOME) SS_DOWN(X_LSHIFT) SS_TAP(X_END) SS_UP(X_LSHIFT));
-        SEND_STRING(SS_TAP(X_BSPACE));
-        return false;
-
-      case 6: // Line Delete Mac
-        SEND_STRING(SS_LCTRL("a") SS_DOWN(X_LSHIFT) SS_LCTRL("e") SS_UP(X_LSHIFT));
-        SEND_STRING(SS_TAP(X_BSPACE));
-        return false;
-
-      case 7: // Duplicate Selection
-        SEND_STRING(SS_LCTRL("c") SS_TAP(X_RIGHT) SS_LCTRL("v"));
-        return false;
-
-      case 8: // Duplicate Selection Mac
-        SEND_STRING(SS_LGUI("c") SS_TAP(X_RIGHT) SS_LGUI("v"));
-        return false;
-
-      case 9: // Join line
-        SEND_STRING(SS_TAP(X_END) SS_TAP(X_DELETE));
-        return false;
-
-      case 10: // Join line Mac
-        SEND_STRING(SS_LCTRL("e") SS_TAP(X_DELETE));
-        return false;
-
-      case 98: // Print mode
-        SEND_STRING("PC");
-        return false;
-
-      case 99: // Print mode
-        SEND_STRING("OSX");
-        return false;
-    }
-  }
-  return MACRO_NONE;
-};

keyboards/handwired/atreus50/keymaps/ajp10304/readme.md

@@ -1,11 +1,15 @@
 # AJP10304 Custom Atreus50 Layout
-# Also available for the Planck and JJ40
+# Also available for the Planck, Shark and JJ40
 
 **Note:** In the tables below where there are two characters on a key,
 the second is the output when shift is applied.
 
 **Note:** The below tables assume a UK layout.
 
+#### Flashing
+
+`make handwired/atreus50:ajp10304:flash`
+
 ##### Main Qwerty Layer
 
 * Tab: when held, operates as shift.
@@ -43,13 +47,13 @@ Activated when `Lower` is held in the above `qwerty` layer.
 | Shift |  \|  |  `¬  |  #~  |  '@  |  -_  |      |      |  =+  |  #~  |  [{  |  ]}  |  '@  |Shift |
 |       |      |      |      |Lower | Del  | Ctrl | Alt  |Space |      | Next | Vol- | Vol+ | Play |
 
- ##### Raise Layer
+##### Raise Layer
- Activated when `Raise` is held in the above `qwerty` layer.
+Activated when `Raise` is held in the above `qwerty` layer.
 
- * Preferred layer for typing brackets.
+* Preferred layer for typing brackets.
- * Allows for cursor navigation to be used solely with the right hand.
+* Allows for cursor navigation to be used solely with the right hand.
- * WRDSEL: Select the word where the cursor is.
+* WRDSEL: Select the word where the cursor is.
- * |< and >|: Apply `ctrl` to `left` and `right` respectively for word jumping.
+* |< and >|: Apply `ctrl` to `left` and `right` respectively for word jumping.
 
 |       |      |      |      |      |      |      |      |       |      |      |      |       |      |
 | :---: |:----:| :---:| :---:| :---:| :---:| :---:| :---:| :---: | :---:| :---:| :---:| :---: | :---:|
@@ -98,11 +102,20 @@ Activated when `fn` and `raise` held together.
 
 |       |      |      |      |      |      |      |      |      |      |      |      |      |      |
 | :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:|
-| ESC   |      |      |      |      |      |      |      |      |      |      |      |      |      |
+| ESC   |      |      |      |      |      |      |      |      |      | BTN3 |      |      |      |
 | ACC0  | ACC1 | ACC2 |      |      |      |      |      |      | BTN1 |  UP  | BTN2 |      |      |
 | ACC0  | ACC1 | ACC2 |      |      |      |      |      |      | LEFT | DOWN | RIGHT|      |      |
 |       |      |      |      |      |      | Ctrl | Alt  |      |      |      |      |      |      |
 
+##### Number Pad Layout
+Activated when holding `Esc` key.
+
+|       |      |      |      |      |      |      |      |      |      |      |      |      |      |
+| :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:|
+|       |      |      |      |      |      |      |      |NMLOCK|   7  |   8  |   9  |   /  |      |
+|       |      |      |      |      |      |      |      |      |   4  |   5  |   6  |   *  |      |
+|       |      |      |      |      |      |      |      |      |   1  |   2  |   3  |   +  |      |
+|       |      |      |      |      |      | Ctrl | Alt  |      |   0  |   .  |   ,  |   -  |      |
+
+
 
-##Program Command
-teensy_loader_cli -w -mmcu=atmega32u4 handwired_atreus50_ajp10304.hex

keyboards/handwired/atreus50/keymaps/ajp10304/rules.mk

@@ -1,8 +1,3 @@
 AUDIO_ENABLE = no
 MOUSEKEY_ENABLE = yes
-
-TEMP := $(OPT_DEFS)
-OPT_DEFS = $(filter-out -DBOOTLOADER_SIZE=4096,$(TEMP))
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
 BOOTLOADER = halfkay

keyboards/handwired/boss566y/redragon_vara/config.h

@@ -0,0 +1,51 @@
+/*
+Copyright 2020 boss566y
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5048 //PH
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    PH
+#define PRODUCT         Redragon Vara 
+#define DESCRIPTION     HandWired Redragon Vara
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 11
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7, D0, F0, F1, F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { D1, D2, D3, C6, D5, C7, D4, D7, B4, B5, B6 }
+
+#define DIODE_DIRECTION COL2ROW
+
+
+// generated by KBFirmware JSON to QMK Parser
+// https://noroadsleft.github.io/kbf_qmk_converter/

keyboards/handwired/boss566y/redragon_vara/info.json

@@ -0,0 +1,118 @@
+{
+    "keyboard_name": "Handwired Redragon Vara",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 22.5,
+    "height": 6.5,
+    "layouts": {
+        "LAYOUT_fullsize_ansi": {
+            "layout": [
+                {"label":"K00 (B0,D1)", "x":0, "y":0},
+                {"label":"K02 (B0,D3)", "x":2, "y":0},
+                {"label":"K03 (B0,C6)", "x":3, "y":0},
+                {"label":"K04 (B0,D5)", "x":4, "y":0},
+                {"label":"K05 (B0,C7)", "x":5, "y":0},
+                {"label":"K07 (B0,D7)", "x":6.5, "y":0},
+                {"label":"K08 (B0,B4)", "x":7.5, "y":0},
+                {"label":"K09 (B0,B5)", "x":8.5, "y":0},
+                {"label":"K0A (B0,B6)", "x":9.5, "y":0},
+                {"label":"K6A (F0,B6)", "x":11, "y":0},
+                {"label":"K69 (F0,B5)", "x":12, "y":0},
+                {"label":"K68 (F0,B4)", "x":13, "y":0},
+                {"label":"K67 (F0,D7)", "x":14, "y":0},
+                {"label":"K66 (F0,D4)", "x":15.25, "y":0},
+                {"label":"K65 (F0,C7)", "x":16.25, "y":0},
+                {"label":"K64 (F0,D5)", "x":17.25, "y":0},
+                {"label":"K10 (B1,D1)", "x":0, "y":1.5},
+                {"label":"K11 (B1,D2)", "x":1, "y":1.5},
+                {"label":"K12 (B1,D3)", "x":2, "y":1.5},
+                {"label":"K13 (B1,C6)", "x":3, "y":1.5},
+                {"label":"K14 (B1,D5)", "x":4, "y":1.5},
+                {"label":"K15 (B1,C7)", "x":5, "y":1.5},
+                {"label":"K16 (B1,D4)", "x":6, "y":1.5},
+                {"label":"K17 (B1,D7)", "x":7, "y":1.5},
+                {"label":"K18 (B1,B4)", "x":8, "y":1.5},
+                {"label":"K19 (B1,B5)", "x":9, "y":1.5},
+                {"label":"K1A (B1,B6)", "x":10, "y":1.5},
+                {"label":"K7A (F1,B6)", "x":11, "y":1.5},
+                {"label":"K79 (F1,B5)", "x":12, "y":1.5},
+                {"label":"K78 (F1,B4)", "x":13, "y":1.5, "w":2},
+                {"label":"K76 (F1,D4)", "x":15.25, "y":1.5},
+                {"label":"K75 (F1,C7)", "x":16.25, "y":1.5},
+                {"label":"K74 (F1,D5)", "x":17.25, "y":1.5},
+                {"label":"K73 (F1,C6)", "x":18.5, "y":1.5},
+                {"label":"K72 (F1,D3)", "x":19.5, "y":1.5},
+                {"label":"K71 (F1,D2)", "x":20.5, "y":1.5},
+                {"label":"K70 (F1,D1)", "x":21.5, "y":1.5},
+                {"label":"K20 (B2,D1)", "x":0, "y":2.5, "w":1.5},
+                {"label":"K21 (B2,D2)", "x":1.5, "y":2.5},
+                {"label":"K22 (B2,D3)", "x":2.5, "y":2.5},
+                {"label":"K23 (B2,C6)", "x":3.5, "y":2.5},
+                {"label":"K24 (B2,D5)", "x":4.5, "y":2.5},
+                {"label":"K25 (B2,C7)", "x":5.5, "y":2.5},
+                {"label":"K26 (B2,D4)", "x":6.5, "y":2.5},
+                {"label":"K27 (B2,D7)", "x":7.5, "y":2.5},
+                {"label":"K28 (B2,B4)", "x":8.5, "y":2.5},
+                {"label":"K29 (B2,B5)", "x":9.5, "y":2.5},
+                {"label":"K2A (B2,B6)", "x":10.5, "y":2.5},
+                {"label":"K8A (F4,B6)", "x":11.5, "y":2.5},
+                {"label":"K89 (F4,B5)", "x":12.5, "y":2.5},
+                {"label":"K87 (F4,D7)", "x":13.5, "y":2.5, "w":1.5},
+                {"label":"K86 (F4,D4)", "x":15.25, "y":2.5},
+                {"label":"K85 (F4,C7)", "x":16.25, "y":2.5},
+                {"label":"K84 (F4,D5)", "x":17.25, "y":2.5},
+                {"label":"K83 (F4,C6)", "x":18.5, "y":2.5},
+                {"label":"K82 (F4,D3)", "x":19.5, "y":2.5},
+                {"label":"K81 (F4,D2)", "x":20.5, "y":2.5},
+                {"label":"K90 (F5,D1)", "x":21.5, "y":2.5, "h":2},
+                {"label":"K30 (B3,D1)", "x":0, "y":3.5, "w":1.75},
+                {"label":"K31 (B3,D2)", "x":1.75, "y":3.5},
+                {"label":"K32 (B3,D3)", "x":2.75, "y":3.5},
+                {"label":"K33 (B3,C6)", "x":3.75, "y":3.5},
+                {"label":"K34 (B3,D5)", "x":4.75, "y":3.5},
+                {"label":"K35 (B3,C7)", "x":5.75, "y":3.5},
+                {"label":"K36 (B3,D4)", "x":6.75, "y":3.5},
+                {"label":"K37 (B3,D7)", "x":7.75, "y":3.5},
+                {"label":"K38 (B3,B4)", "x":8.75, "y":3.5},
+                {"label":"K39 (B3,B5)", "x":9.75, "y":3.5},
+                {"label":"K3A (B3,B6)", "x":10.75, "y":3.5},
+                {"label":"K9A (F5,B6)", "x":11.75, "y":3.5},
+                {"label":"K98 (F5,B4)", "x":12.75, "y":3.5, "w":2.25},
+                {"label":"K93 (F5,C6)", "x":18.5, "y":3.5},
+                {"label":"K92 (F5,D3)", "x":19.5, "y":3.5},
+                {"label":"K91 (F5,D2)", "x":20.5, "y":3.5},
+                {"label":"K40 (B7,D1)", "x":0, "y":4.5, "w":2.25},
+                {"label":"K42 (B7,D3)", "x":2.25, "y":4.5},
+                {"label":"K43 (B7,C6)", "x":3.25, "y":4.5},
+                {"label":"K44 (B7,D5)", "x":4.25, "y":4.5},
+                {"label":"K45 (B7,C7)", "x":5.25, "y":4.5},
+                {"label":"K46 (B7,D4)", "x":6.25, "y":4.5},
+                {"label":"K47 (B7,D7)", "x":7.25, "y":4.5},
+                {"label":"K48 (B7,B4)", "x":8.25, "y":4.5},
+                {"label":"K49 (B7,B5)", "x":9.25, "y":4.5},
+                {"label":"K4A (B7,B6)", "x":10.25, "y":4.5},
+                {"label":"KAA (F6,B6)", "x":11.25, "y":4.5},
+                {"label":"KA8 (F6,B4)", "x":12.25, "y":4.5, "w":2.75},
+                {"label":"KA5 (F6,C7)", "x":16.25, "y":4.5},
+                {"label":"KA3 (F6,C6)", "x":18.5, "y":4.5},
+                {"label":"KA2 (F6,D3)", "x":19.5, "y":4.5},
+                {"label":"KA1 (F6,D2)", "x":20.5, "y":4.5},
+                {"label":"KB0 (F7,D1)", "x":21.5, "y":4.5, "h":2},
+                {"label":"K50 (D0,D1)", "x":0, "y":5.5, "w":1.25},
+                {"label":"K51 (D0,D2)", "x":1.25, "y":5.5, "w":1.25},
+                {"label":"K53 (D0,C6)", "x":2.5, "y":5.5, "w":1.25},
+                {"label":"K56 (D0,D4)", "x":3.75, "y":5.5, "w":6.25},
+                {"label":"K5A (D0,B6)", "x":10, "y":5.5, "w":1.25},
+                {"label":"KBA (F7,B6)", "x":11.25, "y":5.5, "w":1.25},
+                {"label":"KB9 (F7,B5)", "x":12.5, "y":5.5, "w":1.25},
+                {"label":"KB7 (F7,D7)", "x":13.75, "y":5.5, "w":1.25},
+                {"label":"KB6 (F7,D4)", "x":15.25, "y":5.5},
+                {"label":"KB5 (F7,C7)", "x":16.25, "y":5.5},
+                {"label":"KB4 (F7,D5)", "x":17.25, "y":5.5},
+                {"label":"KB3 (F7,C6)", "x":18.5, "y":5.5, "w":2},
+                {"label":"KB1 (F7,D2)", "x":20.5, "y":5.5}
+            ]
+        }
+    }
+    ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
+}

keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c

@@ -0,0 +1,45 @@
+/* Copyright 2020 boss566y
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_fullsize_ansi(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,    KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,            KC_INS,  KC_HOME, KC_PGUP,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,        KC_DEL,  KC_END,  KC_PGDN,   KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        XXXXXXX,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                                             KC_P4,   KC_P5,   KC_P6,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                            KC_UP,              KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              MO(1),     MO(2),     RGUI_T(KC_APP),   KC_LCTL,      KC_LEFT, KC_DOWN, KC_RGHT,   KC_P0,            KC_PDOT
+    ),
+    [1] = LAYOUT_fullsize_ansi(
+        RESET,            _______, _______, _______, _______,     _______, _______, _______, _______,      _______, _______, _______, _______,   _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,             _______, C(KC_HOME),  _______,   _______, _______, _______, _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______, _______,   _______, _______, _______, _______,
+        KC_CAPS,       KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______,                                            _______, _______, _______,
+        _______,            _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______,                            _______,            _______, _______, _______, _______,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______,      _______, _______, _______,   _______,          _______
+    ),
+    [2] = LAYOUT_fullsize_ansi(
+        RESET,            _______, _______, _______, _______,     _______, KC_VOLD, KC_VOLU, KC_MUTE,      KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT,   _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, _______, _______,   _______, _______, _______, _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______, _______,   _______, _______, _______, _______,
+        _______,       _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______, _______,                                            _______, _______, _______,
+        _______,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                            _______,            _______, _______, _______, _______,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______,      _______, _______, _______,   _______,          _______
+    ),
+
+
+};

keyboards/handwired/boss566y/redragon_vara/keymaps/default/readme.md

@@ -0,0 +1,11 @@
+# Default Layout
+
+Keymap is basic 104 qwerty layout with:
+
+* Caps Lock moved to Layer 1 leaving blank key on Base Layer
+* Menu Key changed to mod tap for Menu and Windows Keys
+* RAlt changed to M(1). Media playback on A to F, volume keys on X to V, and Delete on Backspace
+* FN is M(2). Arrow keys on HJKL, media keys on F6 to F12, and RCtrl+Home on Home. 
+* Both M(1) and M(2) have Reset on Escape
+
+ 

keyboards/handwired/boss566y/redragon_vara/keymaps/via/config.h

@@ -0,0 +1,21 @@
+/*
+Copyright 2020 boss566y
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 3
+

keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c

@@ -0,0 +1,45 @@
+/* Copyright 2020 boss566y
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_fullsize_ansi(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,    KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,            KC_INS,  KC_HOME, KC_PGUP,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,        KC_DEL,  KC_END,  KC_PGDN,   KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        XXXXXXX,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                                             KC_P4,   KC_P5,   KC_P6,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                            KC_UP,              KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              MO(1),     MO(2),     KC_RGUI,   KC_LCTL,      KC_LEFT, KC_DOWN, KC_RGHT,   KC_P0,            KC_PDOT
+    ),
+    [1] = LAYOUT_fullsize_ansi(
+        RESET,            _______, _______, _______, _______,     _______, _______, _______, _______,      _______, _______, _______, _______,   _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,             _______, _______,  _______,   _______, _______, _______, _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______, _______,   _______, _______, _______, _______,
+        KC_CAPS,       KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______,                                            _______, _______, _______,
+        _______,            _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______,                            _______,            _______, _______, _______, _______,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______,      _______, _______, _______,   _______,          _______
+    ),
+    [2] = LAYOUT_fullsize_ansi(
+        RESET,            _______, _______, _______, _______,     _______, KC_VOLD, KC_VOLU, KC_MUTE,      KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT,   _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, _______, _______,   _______, _______, _______, _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______, _______,   _______, _______, _______, _______,
+        _______,       _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______, _______,                                            _______, _______, _______,
+        _______,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                            _______,            _______, _______, _______, _______,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______,      _______, _______, _______,   _______,          _______
+    ),
+
+};

keyboards/handwired/boss566y/redragon_vara/keymaps/via/readme.md

@@ -0,0 +1,12 @@
+# Default Layout
+
+Keymap is basic 104 qwerty layout with:
+
+* Caps Lock moved to Layer 1 leaving blank key on Base Layer
+* Menu Key changed to mod tap for Menu and Windows Keys
+* RAlt changed to M(1). Media playback on A to F, volume keys on X to V, and Delete on Backspace
+* FN is M(2). Arrow keys on HJKL, media keys on F6 to F12, and RCtrl+Home on Home. 
+* Both M(1) and M(2) have Reset on Escape
+* VIA Enabled [VIA JSON File](https://github.com/boss566y/keyboards/blob/boss566y/src/boss566y/handwired/redragon_vara.json)
+
+ 

keyboards/handwired/boss566y/redragon_vara/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/handwired/boss566y/redragon_vara/readme.md

@@ -0,0 +1,14 @@
+# Handwired Redragon Vara
+
+![Redragon](https://imgur.com/6L35ata.jpg)
+
+A handwired Redragon Vara. Built using a teensy 2.0 and has  a 12x11 matrix 
+
+* Keyboard Maintainer: [boss566y](https://github.com/boss566y)
+* Hardware: Redragon Vara and Teensy 2.0
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/boss566y/redragon_vara:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/boss566y/redragon_vara/redragon_vara.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 boss566y
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "redragon_vara.h"

keyboards/handwired/boss566y/redragon_vara/redragon_vara.h

@@ -0,0 +1,43 @@
+/* Copyright 2020 boss566y
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_fullsize_ansi( \
+    K00,      K02, K03, K04, K05,   K07, K08, K09, K0A,    K6A, K69, K68, K67,  K66, K65, K64,                      \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K7A, K79, K78,       K76, K75, K74,  K73, K72, K71, K70, \
+    K20,   K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K8A, K89, K87,     K86, K85, K84,  K83, K82, K81, K90, \
+    K30,    K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K9A, K98,                         K93, K92, K91,      \
+    K40,       K42, K43, K44, K45, K46, K47, K48, K49, K4A, KAA, KA8,                KA5,       KA3, KA2, KA1, KB0, \
+    K50,  K51,  K53,              K56,                K5A,  KBA,  KB9,  KB7,    KB6, KB5, KB4,  KB3,      KB1       \
+) { \
+    { K00,   KC_NO, K02,   K03,   K04,   K05,   KC_NO, K07,   K08,   K09,   K0A   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A   }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A   }, \
+    { K40,   KC_NO, K42,   K43,   K44,   K45,   K46,   K47,   K48,   K49,   K4A   }, \
+    { K50,   K51,   KC_NO, K53,   KC_NO, KC_NO, K56,   KC_NO, KC_NO, KC_NO, K5A   }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, K64,   K65,   K66,   K67,   K68,   K69,   K6A   }, \
+    { K70,   K71,   K72,   K73,   K74,   K75,   K76,   KC_NO, K78,   K79,   K7A   }, \
+    { KC_NO, K81,   K82,   K83,   K84,   K85,   K86,   K87,   KC_NO, K89,   K8A   }, \
+    { K90,   K91,   K92,   K93,   KC_NO, KC_NO, KC_NO, KC_NO, K98,   KC_NO, K9A   }, \
+    { KC_NO, KA1,   KA2,   KA3,   KC_NO, KA5,   KC_NO, KC_NO, KA8,   KC_NO, KAA   }, \
+    { KB0,   KB1,   KC_NO, KB3,   KB4,   KB5,   KB6,   KB7,   KC_NO, KB9,   KBA   }, \
+}
+
+// generated by KBFirmware JSON to QMK Parser
+// https://noroadsleft.github.io/kbf_qmk_converter/

keyboards/handwired/boss566y/redragon_vara/rules.mk

@@ -0,0 +1,34 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = halfkay
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes        # Mouse keys
+EXTRAKEY_ENABLE = yes        # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no        # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no             # USB Nkey Rollover
+BACKLIGHT_ENABLE = no        # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no         # Enable keyboard RGB underglow
+MIDI_ENABLE = no             # MIDI support
+UNICODE_ENABLE = no          # Unicode
+BLUETOOTH_ENABLE = no        # Enable Bluetooth
+AUDIO_ENABLE = no            # Audio output
+FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
+
+LAYOUTS = fullsize_ansi

keyboards/jian/keymaps/via/keymap.c

@@ -0,0 +1,28 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT(
+  KC_LGUI, KC_GRV,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,         RGUI_T(KC_RBRC),
+           KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, RCTL_T(KC_QUOT),
+           KC_LALT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RALT_T(KC_BSLS),
+                LT(2, KC_TAB), LSFT_T(KC_SPC), LT(1, KC_ENT),      LT(1, KC_ESC), RSFT_T(KC_BSPC), LT(2, KC_DEL)
+),
+[1] = LAYOUT(
+  _______, KC_UNDS,         KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,        KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,          RGUI_T(KC_F12),
+           LCTL_T(KC_EQL),  KC_EXLM, KC_AT, KC_HASH, KC_DLR,  KC_PERC,      KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, RCTL_T(KC_MINS),
+           LALT_T(KC_PPLS), KC_1,    KC_2,  KC_3,    KC_4,    KC_5,         KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+                                      LT(3, KC_TAB), _______, _______,      _______, _______, LT(3, KC_DEL)
+),
+[2] = LAYOUT(
+  _______, KC_NLCK,         KC_PSLS, KC_P7,   KC_P8,   KC_P9,   KC_PMNS,      KC_VOLU, KC_HOME, KC_PSCR, KC_PGUP, KC_SLCK, KC_CAPS,        _______,
+           LCTL_T(KC_EQL),  KC_PAST, KC_P4,   KC_P5,   KC_P6,   KC_PPLS,      KC_MUTE, KC_LEFT, KC_UP,   KC_RGHT, KC_INS,  RCTL_T(KC_APP),
+           _______,         KC_P0,   KC_P1,   KC_P2,   KC_P3,   KC_PCMM,      KC_VOLD, KC_END,  KC_DOWN, KC_PGDN, KC_PAUS, _______,
+                                        _______, _______, LT(3, KC_ENT),      LT(3, KC_ESC), _______, _______
+),
+[3] = LAYOUT_symmetric(
+  RESET,   DEBUG,   XXXXXXX, BL_INC,  RGB_VAI, RGB_HUD, RGB_HUI,
+           XXXXXXX, XXXXXXX, BL_DEC,  RGB_VAD, RGB_SAD, RGB_SAI,
+           XXXXXXX, BL_BRTG, BL_TOGG, RGB_TOG, RGB_RMOD,RGB_MOD,
+                                      _______, SH_TG,   _______
+)
+};

keyboards/jian/keymaps/via/rules.mk

@@ -0,0 +1,3 @@
+SWAP_HANDS_ENABLE = yes
+EXTRAKEY_ENABLE = yes    # Audio control and System control
+VIA_ENABLE = yes

keyboards/jian/nsrev2/config.h

@@ -41,6 +41,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5
 
+#define QMK_ESC_OUTPUT D3
+#define QMK_ESC_INPUT B1
+
 #define PHYSICAL_LEDS_ENABLE
 
 #ifdef BACKLIGHT_ENABLE

keyboards/jian/rev2/config.h

@@ -47,6 +47,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5
 
+#define QMK_ESC_OUTPUT D3
+#define QMK_ESC_INPUT B1
+
 #define PHYSICAL_LEDS_ENABLE
 #define IOS_DEVICE_ENABLE
 

keyboards/jian/rules.mk

@@ -1 +1,2 @@
 DEFAULT_FOLDER = jian/rev2
+LTO_ENABLE = yes

keyboards/jj40/keymaps/ajp10304/keymap.c

@@ -1,342 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "keymap_uk.h"
-
-extern keymap_config_t keymap_config;
-
-enum jj40_layers {
-  _QWERTY,
-  _MAC,
-  _LOWER,
-  _MLWR,
-  _RAISE,
-  _MRSE,
-  _FUNC,
-  _MFNC,
-  _FUNC2,
-  _MFNC2,
-  _ADJUST,
-  _MOUSE
-};
-
-enum jj40_keycodes {
-  QWERTY = SAFE_RANGE,
-  MAC,
-  FUNC,
-  MFNC,
-  FUNC2,
-  MFNC2,
-  LOWER,
-  MLWR,
-  RAISE,
-  MRSE,
-  MOUSE,
-  DYNAMIC_MACRO_RANGE
-};
-
-#include "dynamic_macro.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Qwerty
- * ,-----------------------------------------------------------------------------------.
- * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |  ;:  | Enter|
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shft |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |  ,<  |  .>  |  /?  | Shft |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Fn   | Ctrl | Alt  | GUI  |Lower | Bksp |Space |Raise | Shift| MENU | Ctrl | Fn2  |
- * `-----------------------------------------------------------------------------------'
- */
-[_QWERTY] = LAYOUT_ortho_4x12(\
-  KC_ESC,                KC_Q,       KC_W,        KC_E,      KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,      KC_O,      KC_P,       KC_BSPC                 ,\
-  MT(MOD_LSFT, KC_TAB),  KC_A,       KC_S,        KC_D,      KC_F,    KC_G,    KC_H,    KC_J,    KC_K,      KC_L,      KC_SCLN,    MT(MOD_RSFT, KC_ENT)    ,\
-  KC_LSHIFT,             KC_Z,       KC_X,        KC_C,      KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM,   KC_DOT,    KC_SLSH,    KC_RSHIFT               ,\
-  MO(_FUNC),             KC_LCTL,    KC_LALT,     KC_LGUI,   LOWER,   KC_BSPC, KC_SPC,  RAISE,   KC_LSHIFT, KC_BTN2,   KC_RCTL,    MO(_FUNC2)              \
-),
-
-/* Function
- * ,-----------------------------------------------------------------------------------.
- * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |  1!  |  2"  |  3£  |  4$  |  5%  |  6^  |  7&  |  8*  |  9(  |  0)  |  ~   |INSERT|
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|  \|  |  `¬  |  #~  |   *  |  -_  |  =+  |  \|  |  [{  |  ]}  |  '@  |Shift |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Fn   | Ctrl | Alt  | GUI  |Lower | Bksp |Space |Mouse | MENU | Alt  | Ctrl | Fn   |
- * `-----------------------------------------------------------------------------------'
- */
-[_FUNC] = LAYOUT_ortho_4x12(\
-  KC_F1,     KC_F2,           KC_F3,    KC_F4,         KC_F5,   KC_F6,   KC_F7,   KC_F8,      KC_F9,    KC_F10,  KC_F11,  KC_F12                 ,\
-  KC_1,      KC_2,            KC_3,     KC_4,          KC_5,    KC_6,    KC_7,    KC_8,       KC_9,     KC_0,    UK_TILD, KC_INSERT              ,\
-  KC_LSHIFT, KC_NONUS_BSLASH, KC_GRAVE, KC_NONUS_HASH, KC_PAST, KC_MINS, KC_EQL,  KC_BSLASH,  KC_LBRC,  KC_RBRC, KC_QUOT, MT(MOD_RSFT, KC_ENT)   ,\
-  _______,   _______,         _______,  _______,       _______, _______, _______, MO(_MOUSE), _______,  _______, _______, _______                \
-),
-
-/* Lower
- * ,-----------------------------------------------------------------------------------.
- * |  1!  |  2"  |  3£  |  4$  |  5%  |  6^  |  7&  |  8*  |  9(  |  0)  | DEL  | Bksp |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |  !   |   "  |   £  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |WrdDel|WrdBks|
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Shift|  \|  |  `¬  |  #~  |  '@  |  -_  |  =+  |  #~  |  [{  |  ]}  |  '@  |Shift |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |Lower | Del  |Space |      | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------------------------------------------------'
- */
-[_LOWER] = LAYOUT_ortho_4x12(\
-  KC_1,        KC_2,            KC_3,           KC_4,           KC_5,          KC_6,          KC_7,           KC_8,            KC_9,           KC_0,          KC_DEL,          KC_BSPC                ,\
-  LSFT(KC_1),  LSFT(KC_2),      LSFT(KC_3),     LSFT(KC_4),     LSFT(KC_5),    LSFT(KC_6),    LSFT(KC_7),     LSFT(KC_8),      LSFT(KC_9),     LSFT(KC_0),    LCTL(KC_DEL),    LCTL(KC_BSPC)          ,\
-  KC_LSPO,     KC_NONUS_BSLASH, KC_GRAVE,       KC_NONUS_HASH,  KC_QUOT,       KC_MINS,       KC_EQL,         KC_NONUS_HASH,   KC_LBRC,        KC_RBRC,       KC_QUOT,         MT(MOD_RSFT, KC_ENT)   ,\
-  _______,     _______,         _______,        _______,        _______,       KC_DEL,        _______,        _______,         KC_MNXT,        KC_VOLD,       KC_VOLU,         KC_MPLY                \
-),
-
-/* Raise
- * ,-----------------------------------------------------------------------------------.
- * |   `  |      |WRDSEL|  [   |   ]  |      |      | PGUP | HOME |PGDOWN|      |PRNTSC|
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |   `  |      |      |  (   |   )  |      |      | HOME |  UP  | END  |      |ZOOM +|
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |  {   |   }  |      |  |<  | LEFT | DOWN |RIGHT |  >|  |ZOOM -|
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | Mouse|      |      |      |      |  Alt | Enter|Raise |      |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-[_RAISE] = LAYOUT_ortho_4x12(\
-  KC_GRV,     XXXXXXX, M(1),    KC_LBRC,       KC_RBRC,       XXXXXXX,   XXXXXXX,       KC_PGUP,  KC_HOME,  KC_PGDOWN,  XXXXXXX,        KC_PSCREEN            ,\
-  KC_GRV,     XXXXXXX, XXXXXXX, LSFT(KC_9),    LSFT(KC_0),    XXXXXXX,   XXXXXXX,       KC_HOME,  KC_UP,    KC_END,     XXXXXXX,        LCTL(LSFT(KC_EQL))    ,\
-  _______,    XXXXXXX, XXXXXXX, LSFT(KC_LBRC), LSFT(KC_RBRC), XXXXXXX,   LCTL(KC_LEFT), KC_LEFT,  KC_DOWN,  KC_RIGHT,   LCTL(KC_RIGHT), LCTL(KC_MINS)         ,\
-  MO(_MOUSE), _______, _______, _______,       _______,       KC_LALT,   KC_ENT,        _______,  XXXXXXX,  _______,    _______,        _______               \
-),
-
-/* Adjust (Lower + Raise)
- * ,-----------------------------------------------------------------------------------.
- * | ???? | Reset|Qwerty|      |      | REC1 | REC2 |      |      |      |      |  Del |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | CAPS |      |      |      |      | PLAY1| PLAY2| Mute | Vol+ | Play |      |      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | PC/MC|      |      |      |      | STOP | STOP | Prev | Vol- | Next |      |      |
- * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |             |      |      |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-[_ADJUST] = LAYOUT_ortho_4x12(\
-  M(0),     RESET,   QWERTY,  BL_ON,   BL_OFF,  DYN_REC_START1,  DYN_REC_START2,  _______,             _______,           _______,              _______,  KC_DEL  ,\
-  KC_CAPS,  RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, KC_AUDIO_MUTE,       KC_AUDIO_VOL_UP,   KC_MEDIA_PLAY_PAUSE,  _______,  _______ ,\
-  TG(_MAC), RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, DYN_REC_STOP,    DYN_REC_STOP,    KC_MEDIA_PREV_TRACK, KC_AUDIO_VOL_DOWN, KC_MEDIA_NEXT_TRACK,  _______,  _______ ,\
-  _______,  _______, _______, _______, _______, _______,         _______,         _______,             _______,           _______,              _______,  _______ \
-),
-
-/* Mouse
- * ,-----------------------------------------------------------------------------------.
- * | ESC  |      |      |      |      |      |      |      |      |      |      |      |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | ACC0 | ACC1 | ACC2 |      |      |      |      | BTN1 |  UP  | BTN2 |      |      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * | ACC0 | ACC1 | ACC2 |      |      |      |      | LEFT | DOWN |RIGHT |      |      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-[_MOUSE] = LAYOUT_ortho_4x12(\
-    KC_ESC ,      _______,      _______,      _______, _______, _______,   _______, _______,     _______,     _______,     _______, _______,\
-    KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______,   _______, KC_MS_BTN1,  KC_MS_UP,   KC_MS_BTN2,   _______, _______,\
-    KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______,   _______, KC_MS_LEFT,  KC_MS_DOWN, KC_MS_RIGHT,  _______, _______,\
-    _______,      _______,      _______,      _______, _______, _______,   _______, _______,     _______,    _______,      _______, _______\
-),
-
-/* Function 2 (Right hand side)
- * ,-----------------------------------------------------------------------------------.
- * |      |      |WRDSEL|      |      |      | LNDEL|      |      |      |      |      |
- * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      | LNSEL| DUP  |      |      |      |      |LNJOIN|      |      |      |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      | UNDO | CUT  | COPY | PASTE|      |      |      |      |      |      | MODE |
- * |------+------+------+------+------+------|------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- * `-----------------------------------------------------------------------------------'
- */
-[_FUNC2] = LAYOUT_ortho_4x12(\
-    _______,  _______,    M(1),       _______,    _______,    _______, M(5),    _______, _______, _______, _______, _______,\
-    _______,  _______,    M(3),       M(7),       _______,    _______, _______, M(10),   _______, _______, _______, _______,\
-    _______,  LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______, _______, _______, _______, _______, _______, M(98),  \
-    _______,  _______,    _______,    _______,    _______,    _______, _______, _______, _______, _______, _______, _______ \
-),
-
-[_MAC]= LAYOUT_ortho_4x12(\
-    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
-    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
-    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
-    MFNC,     _______, _______, _______, MLWR,    _______, _______, MRSE,    _______, _______, _______, MFNC2   \
-),
-
-[_MLWR] = LAYOUT_ortho_4x12(\
-    _______,  _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
-    _______,  _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
-    _______,  _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
-    _______,  _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
-),
-
-[_MRSE] = LAYOUT_ortho_4x12(\
-    _______,  _______,  M(2),    _______, _______, _______, _______,       _______,    _______, _______,    _______,        _______       ,\
-    _______,  _______,  _______, _______, _______, _______, _______,       LCTL(KC_A), _______, LCTL(KC_E), _______,        LGUI(KC_EQL)  ,\
-    _______,  _______,  _______, _______, _______, _______, LALT(KC_LEFT), _______,    _______, _______,    LALT(KC_RIGHT), LGUI(KC_MINS) ,\
-    _______,  _______,  _______, _______, _______, _______, _______,       _______,    _______, _______,    _______,        _______        \
-),
-
-[_MFNC]= LAYOUT_ortho_4x12(\
-    _______,  _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______       ,\
-    _______,  _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, LGUI(KC_PENT) ,\
-    _______,  _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______       ,\
-    _______,  _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______        \
-),
-
-[_MFNC2] = LAYOUT_ortho_4x12(\
-    _______,  _______,    M(2),       _______,    _______,    _______, M(6),    _______, _______, _______, _______, _______,\
-    _______,  _______,    M(4),       M(8),       _______,    _______, _______, M(10),   _______, _______, _______, _______,\
-    _______,  LGUI(KC_Z), LGUI(KC_X), LGUI(KC_C), LGUI(KC_V), _______, _______, _______, _______, _______, _______, M(99),  \
-    _______,  _______,    _______,    _______,    _______,    _______, _______, _______, _______, _______, _______, _______ \
-)
-
-};
-
-void persistant_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-
-  if (!process_record_dynamic_macro(keycode, record)) {
-      return false;
-  }
-
-   switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        persistant_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-    case MLWR:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        layer_on(_MLWR);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        layer_off(_MLWR);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-    case MRSE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        layer_on(_MRSE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        layer_off(_MRSE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-    case MFNC:
-      if (record->event.pressed) {
-        layer_on(_FUNC);
-        layer_on(_MFNC);
-      } else {
-        layer_off(_FUNC);
-        layer_off(_MFNC);
-      }
-      return false;
-    case MFNC2:
-      if (record->event.pressed) {
-        layer_on(_FUNC2);
-        layer_on(_MFNC2);
-      } else {
-        layer_off(_FUNC2);
-        layer_off(_MFNC2);
-      }
-      return false;
-    }
-  return true;
-}
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t keycode, uint8_t opt) {
-  // These would trigger when you hit a key mapped as M(0)
-  if (record->event.pressed) {
-    switch(keycode) {
-      case 0: // Some custom string here
-        SEND_STRING("");
-        return false;
-
-      case 1: // Word Select
-        SEND_STRING(SS_DOWN(X_LCTRL) SS_TAP(X_RIGHT) SS_DOWN(X_LSHIFT) SS_TAP(X_LEFT) SS_UP(X_LSHIFT) SS_UP(X_LCTRL));
-        return false;
-
-      case 2: // Word Select Mac
-        SEND_STRING(SS_DOWN(X_LALT) SS_TAP(X_RIGHT) SS_DOWN(X_LSHIFT) SS_TAP(X_LEFT) SS_UP(X_LSHIFT) SS_UP(X_LALT));
-        return false;
-
-      case 3: // Line Select
-        SEND_STRING(SS_TAP(X_HOME) SS_DOWN(X_LSHIFT) SS_TAP(X_END) SS_UP(X_LSHIFT));
-        return false;
-
-      case 4: // Line Select Mac
-        SEND_STRING(SS_LCTRL("a") SS_DOWN(X_LSHIFT) SS_LCTRL("e") SS_UP(X_LSHIFT));
-        return false;
-
-      case 5: // Line Delete
-        SEND_STRING(SS_TAP(X_HOME) SS_DOWN(X_LSHIFT) SS_TAP(X_END) SS_UP(X_LSHIFT));
-        SEND_STRING(SS_TAP(X_BSPACE));
-        return false;
-
-      case 6: // Line Delete Mac
-        SEND_STRING(SS_LCTRL("a") SS_DOWN(X_LSHIFT) SS_LCTRL("e") SS_UP(X_LSHIFT));
-        SEND_STRING(SS_TAP(X_BSPACE));
-        return false;
-
-      case 7: // Duplicate Selection
-        SEND_STRING(SS_LCTRL("c") SS_TAP(X_RIGHT) SS_LCTRL("v"));
-        return false;
-
-      case 8: // Duplicate Selection Mac
-        SEND_STRING(SS_LGUI("c") SS_TAP(X_RIGHT) SS_LGUI("v"));
-        return false;
-
-      case 9: // Join line
-        SEND_STRING(SS_TAP(X_END) SS_TAP(X_DELETE));
-        return false;
-
-      case 10: // Join line Mac
-        SEND_STRING(SS_LCTRL("e") SS_TAP(X_DELETE));
-        return false;
-
-      case 98: // Print mode
-        SEND_STRING("PC");
-        return false;
-
-      case 99: // Print mode
-        SEND_STRING("OSX");
-        return false;
-    }
-  }
-  return MACRO_NONE;
-};

keyboards/jj40/keymaps/ajp10304/readme.md

@@ -1,11 +1,16 @@
 # AJP10304 Custom JJ40 Layout
-# Also available for the Atreus50 and Planck
+# Also available for the Planck, Shark and Atreus50
 
 **Note:** In the tables below where there are two characters on a key,
 the second is the output when shift is applied.
 
 **Note:** The below tables assume a UK layout.
 
+#### Flashing
+Use sleep to get a chance to get into boot mode.
+
+`make jj40:ajp10304:flash`
+
 ##### Main Qwerty Layer
 
 * Tab: when held, operates as shift.
@@ -43,13 +48,13 @@ Activated when `Lower` is held in the above `qwerty` layer.
 | Shift |  \|  |  `¬  |  #~  |  '@  |  -_  |  =+  |  #~  |  [{  |  ]}  |  '@  |Shift |
 |       |      |      |      |Lower | Del  |Space |      | Next | Vol- | Vol+ | Play |
 
- ##### Raise Layer
+##### Raise Layer
- Activated when `Raise` is held in the above `qwerty` layer.
+Activated when `Raise` is held in the above `qwerty` layer.
 
- * Preferred layer for typing brackets.
+* Preferred layer for typing brackets.
- * Allows for cursor navigation to be used solely with the right hand.
+* Allows for cursor navigation to be used solely with the right hand.
- * WRDSEL: Select the word where the cursor is.
+* WRDSEL: Select the word where the cursor is.
- * |< and >|: Apply `ctrl` to `left` and `right` respectively for word jumping.
+* |< and >|: Apply `ctrl` to `left` and `right` respectively for word jumping.
 
 |       |      |      |      |      |      |       |      |      |      |       |      |
 | :---: |:----:| :---:| :---:| :---:| :---:| :---: | :---:| :---:| :---:| :---: | :---:|
@@ -98,11 +103,17 @@ Activated when `fn` and `raise` held together.
 
 |       |      |      |      |      |      |      |      |      |      |      |      |
 | :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:|
-| ESC   |      |      |      |      |      |      |      |      |      |      |      |
+| ESC   |      |      |      |      |      |      |      | BTN3 |      |      |      |
 | ACC0  | ACC1 | ACC2 |      |      |      |      | BTN1 |  UP  | BTN2 |      |      |
 | ACC0  | ACC1 | ACC2 |      |      |      |      | LEFT | DOWN | RIGHT|      |      |
 |       |      |      |      |      |      |      |      |      |      |      |      |
 
-####Manual Flashing of hex file
+##### Number Pad Layout
-Use sleep to get a chance to get into boot mode.
+Activated when holding `Esc` key.
-`sleep 5; bootloadHID -r .build/jj40_ajp10304.hex`
+
+|       |      |      |      |      |      |      |      |      |      |      |      |
+| :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:|
+|       |      |      |      |      |      |NMLOCK|   7  |   8  |   9  |   /  |      |
+|       |      |      |      |      |      |      |   4  |   5  |   6  |   *  |      |
+|       |      |      |      |      |      |      |   1  |   2  |   3  |   +  |      |
+|       |      |      |      |      |      |      |   0  |   .  |   ,  |   -  |      |

keyboards/keyhive/maypad/config.h

@@ -17,8 +17,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x4B48 //KH for Keyhive
-#define PRODUCT_ID      0x6060
+#define PRODUCT_ID      0x4D50 // MP
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    KeyHive
 #define PRODUCT         maypad

keyboards/keyhive/maypad/keymaps/via/keymap.c

@@ -0,0 +1,26 @@
+/* Copyright 2019 codybender
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    LAYOUT_ortho_5x4(
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_P0,   KC_P0,   KC_PDOT, KC_PENT
+    )
+};

keyboards/keyhive/maypad/keymaps/via/readme.md

@@ -0,0 +1,6 @@
+# VIA Support for Maypad
+
+This adds [VIA](https://caniusevia.com/) support for the Keyhive Maypad. 
+
+Please note that this is a keymap for the Ortho_5x4 layout.
+

keyboards/keyhive/maypad/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/nightmare/config.h

@@ -20,8 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xB00B
+#define VENDOR_ID       0x434B // "CK"
-#define PRODUCT_ID      0x0000
+#define PRODUCT_ID      0x4E49 // "NI"
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    cfbender
 #define PRODUCT         nightmare

keyboards/nightmare/keymaps/via/keymap.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 cfbender
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_split(/* Base */
+        KC_HOME, KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+        KC_END, LCTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOTE, KC_ENTER,
+        KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+        KC_PGDN, KC_LGUI, KC_LALT, KC_LALT, KC_SPACE, KC_SPACE, KC_RGUI, KC_RCTL, MO(2)),
+
+    [1] = LAYOUT_split(
+        _______, _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, KC_DEL,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RIGHT, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______),
+
+    [2] = LAYOUT_split(
+        _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_UP, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RIGHT, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______),
+
+    [3] = LAYOUT_split(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______),
+};
+

keyboards/nightmare/keymaps/via/readme.md

@@ -0,0 +1,3 @@
+# The default keymap for nightmare
+
+![Default Layout](https://imgur.com/G0Hh7F3.png)

keyboards/nightmare/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/nomu30/config.h

@@ -20,30 +20,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xC0C0
+#define VENDOR_ID       0x524B // recompile keys
-#define PRODUCT_ID      0x3000
+#define PRODUCT_ID      0x4E31 // Nomu30
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    Naoto Takai
+#define MANUFACTURER    recompile keys
-#define PRODUCT         nomu30
+#define PRODUCT         Nomu30
-#define DESCRIPTION     A 30% keyboard with ISO enter.
+#define DESCRIPTION     recompile keys Nomu30
 
 /* key matrix size */
 #define MATRIX_ROWS 3
 #define MATRIX_COLS 12
 
-/*
+/* Bootmagic Lite key configuration */
- * Keyboard Matrix Assignments
+#define BOOTMAGIC_LITE_ROW 0
- *
+#define BOOTMAGIC_LITE_COLUMN 11
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D1, D0, D4 }
-#define MATRIX_COL_PINS { C6, D7, E6, B4, F4, F5, F6, F7, B1, B3, B2, B6 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW

keyboards/nomu30/keymaps/via/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2019 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+        KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SPC
+    ),
+    [1] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [2] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [3] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/nomu30/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/nomu30/nomu30.h

@@ -16,15 +16,12 @@
 #pragma once
 
 #include "quantum.h"
+#ifdef KEYBOARD_nomu30_rev1
+    #include "rev1.h"
+#elif KEYBOARD_nomu30_rev2
+    #include "rev2.h"
+#endif
 
-/* This a shortcut to help you visually see your layout.
- *
- * The first section contains all of the arguments representing the physical
- * layout of the board and position of the keys.
- *
- * The second converts the arguments into a two-dimensional array which
- * represents the switch matrix.
- */
 #define LAYOUT( \
         K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
   K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110,       \
@@ -35,14 +32,3 @@
   { K100,  K101, K102, K103, K104, K105, K106, K107, K108, K109,  K110,  KC_NO }, \
   { K200,  K201, K202, K203, K204, K205, K206, K207, K208, KC_NO, KC_NO, KC_NO }, \
 }
-
-#define LAYOUT_kc( \
-        K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
-  K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110,       \
-  K200, K201, K202, K203, K204, K205, K206, K207, K208                    \
-) \
-LAYOUT( \
-             KC_##K001, KC_##K002, KC_##K003, KC_##K004, KC_##K005, KC_##K006, KC_##K007, KC_##K008, KC_##K009, KC_##K010, KC_##K011, \
-  KC_##K100, KC_##K101, KC_##K102, KC_##K103, KC_##K104, KC_##K105, KC_##K106, KC_##K107, KC_##K108, KC_##K109, KC_##K110,            \
-  KC_##K200, KC_##K201, KC_##K202, KC_##K203, KC_##K204, KC_##K205, KC_##K206, KC_##K207, KC_##K208                                   \
-)

keyboards/nomu30/rev1/config.h

@@ -0,0 +1,35 @@
+/*
+Copyright 2019 Naoto Takai
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D1, D0, D4 }
+#define MATRIX_COL_PINS { C6, D7, E6, B4, F4, F5, F6, F7, B1, B3, B2, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW

keyboards/nomu30/rev1/rev1.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev1.h"

keyboards/nomu30/rev1/rev1.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"

keyboards/nomu30/rev1/rules.mk

@@ -0,0 +1,32 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/nomu30/rev2/config.h

@@ -0,0 +1,47 @@
+/*
+Copyright 2020 Naoto Takai
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B2, B1, B0 }
+#define MATRIX_COL_PINS { C4, C5, C6, C7, B7, B6, B5, B4, B3, D5, D4, D3 }
+#define UNUSED_PINS { C2, D0, D1, D2, D6 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/nomu30/rev2/rev2.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev2.h"

keyboards/nomu30/rev2/rev2.h

@@ -0,0 +1,19 @@
+/* Copyright 2020 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"

keyboards/nomu30/rev2/rules.mk

@@ -0,0 +1,31 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = no       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/nomu30/rules.mk

@@ -1,33 +1 @@
-# MCU name
+DEFAULT_FOLDER = nomu30/rev1
-MCU = atmega32u4
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = caterina
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no        # Console for debug
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/planck/keymaps/abishalom/config.h

@@ -0,0 +1,35 @@
+#pragma once
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2

keyboards/planck/keymaps/abishalom/keymap.c

@@ -0,0 +1,316 @@
+/* Copyright 2015-2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "muse.h"
+
+
+enum planck_layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _NAV,
+  _PLOVER,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  PLOVER,
+  BACKLIT,
+  EXT_PLV
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl| CAPS | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_planck_grid(
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    LT(_NAV, KC_ESC),  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    KC_LCTL, KC_CAPS, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |Pl/Ps |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Prev | Vol- | Vol+ | Next |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_planck_grid(
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  KC_MPLY,
+    _______, _______, _______, _______, _______, _______, _______, _______,    KC_MPRV,    KC_VOLD, KC_VOLU, KC_MNXT
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |Pl/Ps |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Prev | Vol- | Vol+ | Next |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_planck_grid(
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, KC_MPLY,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV,    KC_VOLD, KC_VOLU, KC_MNXT
+),
+
+/* Nav
+ * ,----------------------------------l-------------------------------------------------.
+ * |      |      |      |      |      |      |      | Pg Dn|  Up  | Pg Up|      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Mute |  Vol-| Vol+ | Pl/Ps|      |      | Left | Down | Right|      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_NAV] = LAYOUT_planck_grid(
+    _______, _______, _______, _______, _______, _______, _______, KC_PGDOWN, KC_UP,  KC_PGUP, _______ ,  _______,
+    _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, KC_LEFT, KC_DOWN,  KC_RIGHT, _______, _______,
+    _______, _______,   _______,   _______,   _______,  _______,  _______,  _______, _______, _______, _______, KC_MPLY,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV,    KC_VOLD, KC_VOLU, KC_MNXT
+),
+
+
+/* Plover layer (http://opensteno.org)
+ * ,-----------------------------------------------------------------------------------.
+ * |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |   #  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   S  |   T  |   P  |   H  |   *  |   *  |   F  |   P  |   L  |   T  |   D  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   S  |   K  |   W  |   R  |   *  |   *  |   R  |   B  |   G  |   S  |   Z  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Exit |      |      |   A  |   O  |             |   E  |   U  |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_PLOVER] = LAYOUT_planck_grid(
+    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   ,
+    XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,
+    XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX
+),
+
+/* Adjust (Lower + Raise)
+ *                      v------------------------RGB CONTROL--------------------v
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|Debug | RGB  |RGBMOD| HUE+ | HUE- | SAT+ | SAT- |BRGTH+|BRGTH-|  Del |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |MUSmod|Aud on|Audoff|AGnorm|AGswap|Qwerty|      |      |Plover|      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|TermOn|TermOf|      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_planck_grid(
+    _______, RESET,   DEBUG,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD,  RGB_VAI, RGB_VAD, KC_DEL ,
+    _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  _______,  _______,  PLOVER,  _______,
+    _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  TERM_ON, TERM_OFF, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______
+)
+
+};
+
+#ifdef AUDIO_ENABLE
+  float plover_song[][2]     = SONG(PLOVER_SOUND);
+  float plover_gb_song[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+#endif
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+        #ifdef KEYBOARD_planck_rev5
+          writePinLow(E6);
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+        #ifdef KEYBOARD_planck_rev5
+          writePinHigh(E6);
+        #endif
+      }
+      return false;
+    case PLOVER:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+          PLAY_SONG(plover_song);
+        #endif
+        layer_off(_RAISE);
+        layer_off(_LOWER);
+        layer_off(_ADJUST);
+        layer_on(_PLOVER);
+        if (!eeconfig_is_enabled()) {
+            eeconfig_init();
+        }
+        keymap_config.raw = eeconfig_read_keymap();
+        keymap_config.nkro = 1;
+        eeconfig_update_keymap(keymap_config.raw);
+      }
+      return false;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+  }
+  return true;
+}
+
+bool muse_mode = false;
+uint8_t last_muse_note = 0;
+uint16_t muse_counter = 0;
+uint8_t muse_offset = 70;
+uint16_t muse_tempo = 50;
+
+void encoder_update(bool clockwise) {
+  if (muse_mode) {
+    if (IS_LAYER_ON(_RAISE)) {
+      if (clockwise) {
+        muse_offset++;
+      } else {
+        muse_offset--;
+      }
+    } else {
+      if (clockwise) {
+        muse_tempo+=1;
+      } else {
+        muse_tempo-=1;
+      }
+    }
+  } else {
+    if (clockwise) {
+      #ifdef MOUSEKEY_ENABLE
+        tap_code(KC_MS_WH_DOWN);
+      #else
+        tap_code(KC_PGDN);
+      #endif
+    } else {
+      #ifdef MOUSEKEY_ENABLE
+        tap_code(KC_MS_WH_UP);
+      #else
+        tap_code(KC_PGUP);
+      #endif
+    }
+  }
+}
+
+void dip_switch_update_user(uint8_t index, bool active) {
+    switch (index) {
+        case 0: {
+#ifdef AUDIO_ENABLE
+            static bool play_sound = false;
+#endif
+            if (active) {
+#ifdef AUDIO_ENABLE
+                if (play_sound) { PLAY_SONG(plover_song); }
+#endif
+                layer_on(_ADJUST);
+            } else {
+#ifdef AUDIO_ENABLE
+                if (play_sound) { PLAY_SONG(plover_gb_song); }
+#endif
+                layer_off(_ADJUST);
+            }
+#ifdef AUDIO_ENABLE
+            play_sound = true;
+#endif
+            break;
+        }
+        case 1:
+            if (active) {
+                muse_mode = true;
+            } else {
+                muse_mode = false;
+            }
+    }
+}
+
+void matrix_scan_user(void) {
+#ifdef AUDIO_ENABLE
+    if (muse_mode) {
+        if (muse_counter == 0) {
+            uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()];
+            if (muse_note != last_muse_note) {
+                stop_note(compute_freq_for_midi_note(last_muse_note));
+                play_note(compute_freq_for_midi_note(muse_note), 0xF);
+                last_muse_note = muse_note;
+            }
+        }
+        muse_counter = (muse_counter + 1) % muse_tempo;
+    } else {
+        if (muse_counter) {
+            stop_all_notes();
+            muse_counter = 0;
+        }
+    }
+#endif
+}
+
+bool music_mask_user(uint16_t keycode) {
+  switch (keycode) {
+    case RAISE:
+    case LOWER:
+      return false;
+    default:
+      return true;
+  }
+}

keyboards/planck/keymaps/abishalom/readme.md

@@ -0,0 +1,7 @@
+# Abishalom Planck Layout
+
+Mostly the same as default. Changes:
+- Get rid of COLEMAK and DVORAK layers
+- Add new layer (NAV) which is accessed by holding the ESC key. This brings up arrow keys in ijkl spots, along with handy media funcions in wasd.
+- Move left control to the corner, put caps lock between LCTRL and LGUI
+- Adjustments to media keys in bottom right corner

keyboards/planck/keymaps/abishalom/rules.mk

@@ -0,0 +1 @@
+SRC += muse.c

keyboards/planck/keymaps/ajp10304/readme.md

@@ -1,14 +1,15 @@
 # AJP10304 Custom Planck Layout
-# Also available for the Atreus50 and JJ40
+# Also available for the Shark, JJ40 and Atreus50
 
 **Note:** In the tables below where there are two characters on a key,
 the second is the output when shift is applied.
 
 **Note:** The below tables assume a UK layout.
 
-####Flashing
+#### Flashing
-Rev <=5: sudo make planck:ajp10304:dfu
+Rev <=5: `make planck:ajp10304:flash`
-Rev 6: sudo make planck/rev6:ajp10304:dfu-util
+
+Rev 6: `make planck/rev6:ajp10304:flash`
 
 ##### Main Qwerty Layer
 
@@ -47,13 +48,13 @@ Activated when `Lower` is held in the above `qwerty` layer.
 | Shift |  \|  |  `¬  |  #~  |  '@  |  -_  |  =+  |  #~  |  [{  |  ]}  |  '@  |Shift |
 |       |      |      |      |Lower | Del  |Space |      | Next | Vol- | Vol+ | Play |
 
- ##### Raise Layer
+##### Raise Layer
- Activated when `Raise` is held in the above `qwerty` layer.
+Activated when `Raise` is held in the above `qwerty` layer.
 
- * Preferred layer for typing brackets.
+* Preferred layer for typing brackets.
- * Allows for cursor navigation to be used solely with the right hand.
+* Allows for cursor navigation to be used solely with the right hand.
- * WRDSEL: Select the word where the cursor is.
+* WRDSEL: Select the word where the cursor is.
- * |< and >|: Apply `ctrl` to `left` and `right` respectively for word jumping.
+* |< and >|: Apply `ctrl` to `left` and `right` respectively for word jumping.
 
 |       |      |      |      |      |      |       |      |      |      |       |      |
 | :---: |:----:| :---:| :---:| :---:| :---:| :---: | :---:| :---:| :---:| :---: | :---:|
@@ -102,7 +103,17 @@ Activated when `fn` and `raise` held together.
 
 |       |      |      |      |      |      |      |      |      |      |      |      |
 | :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:|
-| ESC   |      |      |      |      |      |      |      |      |      |      |      |
+| ESC   |      |      |      |      |      |      |      | BTN3 |      |      |      |
 | ACC0  | ACC1 | ACC2 |      |      |      |      | BTN1 |  UP  | BTN2 |      |      |
 | ACC0  | ACC1 | ACC2 |      |      |      |      | LEFT | DOWN | RIGHT|      |      |
 |       |      |      |      |      |      |      |      |      |      |      |      |
+
+##### Number Pad Layout
+Activated when holding `Esc` key.
+
+|       |      |      |      |      |      |      |      |      |      |      |      |
+| :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:|
+|       |      |      |      |      |      |NMLOCK|   7  |   8  |   9  |   /  |      |
+|       |      |      |      |      |      |      |   4  |   5  |   6  |   *  |      |
+|       |      |      |      |      |      |      |   1  |   2  |   3  |   +  |      |
+|       |      |      |      |      |      |      |   0  |   .  |   ,  |   -  |      |

keyboards/planck/keymaps/ajp10304/rules.mk

@@ -1,3 +0,0 @@
-AUDIO_ENABLE = no
-MOUSEKEY_ENABLE = yes
-

keyboards/planck/keymaps/callum/keymap.c

@@ -49,7 +49,7 @@
 #define bspc KC_BSPC
 #define caps KC_CAPS
 #define comm KC_COMM
-#define dash A(KC_MINS)
+#define dash A(KC_MINS) // en-dash (–); or with shift: em-dash (—)
 #define scln KC_SCLN
 #define slsh KC_SLSH
 #define spc KC_SPC
@@ -60,7 +60,6 @@
 #define mins KC_MINS
 #define quot KC_QUOT
 #define esc KC_ESC
-#define gbp A(KC_3)
 
 #define down KC_DOWN
 #define home G(KC_LEFT)
@@ -75,8 +74,8 @@
 #define tabr G(S(KC_RBRC))
 #define fwd G(KC_RBRC)
 #define back G(KC_LBRC)
-#define slup S(A(KC_UP))
+#define slup S(A(KC_UP))   // Previous unread in Slack
-#define sldn S(A(KC_DOWN))
+#define sldn S(A(KC_DOWN)) // Next unread in Slack
 
 #define ctl1 C(KC_1)
 #define ctl2 C(KC_2)
@@ -137,6 +136,7 @@ enum planck_layers {
 };
 
 enum planck_keycodes {
+    // ASCII
     ampr = SAFE_RANGE,
     astr,
     at,
@@ -158,6 +158,11 @@ enum planck_keycodes {
     rprn,
     tild,
 
+    // Curly quotes
+    lcqt,
+    rcqt,
+
+    // "Smart" mods
     cmd,
 };
 
@@ -171,7 +176,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
     [SYMB] = LAYOUT_planck_grid(
          esc,   n7,   n5,   n3,   n1,   n9,   n8,   n0,   n2,   n4,   n6, dash,
-         del,   at,  dlr,  eql, lprn, lbrc, rbrc, rprn, astr, hash, plus,  gbp,
+        lcqt,   at,  dlr,  eql, lprn, lbrc, rbrc, rprn, astr, hash, plus, rcqt,
         ____,  grv, pipe, bsls, lcbr, tild, circ, rcbr, ampr, exlm, perc, ____,
         ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____
     ),
@@ -191,78 +196,112 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 };
 
-bool send_string_if_keydown(keyrecord_t *record, const char *s) {
+bool send_string_if_keydown(
+        keyrecord_t *record,
+        const char *unshifted,
+        const char *shifted) {
     if (record->event.pressed) {
-        send_string(s);
+        if (shifted) {
+            uint8_t shifts = get_mods() & MOD_MASK_SHIFT;
+            if (shifts) {
+                del_mods(shifts);
+                SEND_STRING(shifted);
+                add_mods(shifts);
+            } else {
+                SEND_STRING(unshifted);
+            }
+        } else {
+            SEND_STRING(unshifted);
+        }
     }
     return true;
 }
 
-int cmd_keys_down = 0;
+// Holding both cmd keys will instead register as cmd + ctl
+bool smart_cmd(keyrecord_t *record) {
+    static int cmd_keys_down = 0;
+
+    if (record->event.pressed) {
+        if (cmd_keys_down == 0) {
+            register_code(KC_LCMD);
+        } else {
+            register_code(KC_LCTL);
+        }
+        cmd_keys_down++;
+    } else {
+        if (cmd_keys_down == 1) {
+            unregister_code(KC_LCMD);
+        } else {
+            unregister_code(KC_LCTL);
+        }
+        cmd_keys_down--;
+    }
+    return true;
+}
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     switch (keycode) {
         // Override the defualt auto shifted symbols to use SEND_STRING See
         // https://github.com/qmk/qmk_firmware/issues/4072
         case ampr:
-            return send_string_if_keydown(record, "&");
+            return send_string_if_keydown(record, "&", NULL);
         case astr:
-            return send_string_if_keydown(record, "*");
+            return send_string_if_keydown(record, "*", NULL);
         case at:
-            return send_string_if_keydown(record, "@");
+            return send_string_if_keydown(record, "@", NULL);
         case bsls:
-            return send_string_if_keydown(record, "\\");
+            return send_string_if_keydown(record, "\\", NULL);
         case circ:
-            return send_string_if_keydown(record, "^");
+            return send_string_if_keydown(record, "^", NULL);
         case dlr:
-            return send_string_if_keydown(record, "$");
+            return send_string_if_keydown(record, "$", NULL);
         case eql:
-            return send_string_if_keydown(record, "=");
+            return send_string_if_keydown(record, "=", NULL);
         case exlm:
-            return send_string_if_keydown(record, "!");
+            return send_string_if_keydown(record, "!", NULL);
         case grv:
-            return send_string_if_keydown(record, "`");
+            return send_string_if_keydown(record, "`", NULL);
         case hash:
-            return send_string_if_keydown(record, "#");
+            return send_string_if_keydown(record, "#", NULL);
         case lbrc:
-            return send_string_if_keydown(record, "[");
+            return send_string_if_keydown(record, "[", NULL);
         case lcbr:
-            return send_string_if_keydown(record, "{");
+            return send_string_if_keydown(record, "{", NULL);
         case lprn:
-            return send_string_if_keydown(record, "(");
+            return send_string_if_keydown(record, "(", NULL);
         case perc:
-            return send_string_if_keydown(record, "%");
+            return send_string_if_keydown(record, "%", NULL);
         case pipe:
-            return send_string_if_keydown(record, "|");
+            return send_string_if_keydown(record, "|", NULL);
         case plus:
-            return send_string_if_keydown(record, "+");
+            return send_string_if_keydown(record, "+", NULL);
         case rbrc:
-            return send_string_if_keydown(record, "]");
+            return send_string_if_keydown(record, "]", NULL);
         case rcbr:
-            return send_string_if_keydown(record, "}");
+            return send_string_if_keydown(record, "}", NULL);
         case rprn:
-            return send_string_if_keydown(record, ")");
+            return send_string_if_keydown(record, ")", NULL);
         case tild:
-            return send_string_if_keydown(record, "~");
+            return send_string_if_keydown(record, "~", NULL);
+
+        // The macOS shortcuts for curly quotes are horrible, so this rebinds
+        // them so that shift toggles single–double instead of left–right, and
+        // then both varieties of left quote can share one key, and both
+        // varieties of right quote share another.
+        case lcqt:
+            return send_string_if_keydown(
+                    record,
+                    SS_LALT("]"),           // left single quote (‘)
+                    SS_LALT("["));          // left double quote (“)
+        case rcqt:
+            return send_string_if_keydown(
+                    record,
+                    SS_LALT(SS_LSFT("]")),  // right single quote (’)
+                    SS_LALT(SS_LSFT("["))); // right double quote (”)
 
         // cmd + cmd -> cmd + ctl
         case cmd:
-            if (record->event.pressed) {
+            return smart_cmd(record);
-                if (cmd_keys_down == 0) {
-                    register_code(KC_LCMD);
-                } else {
-                    register_code(KC_LCTL);
-                }
-                cmd_keys_down++;
-            } else {
-                if (cmd_keys_down == 1) {
-                    unregister_code(KC_LCMD);
-                } else {
-                    unregister_code(KC_LCTL);
-                }
-                cmd_keys_down--;
-            }
-            return true;
     }
     return true;
 }

keyboards/planck/keymaps/callum/readme.md

@@ -1,4 +1,4 @@
-# callum's planck layout
+# callum’s planck layout
 
 This is a layout for the grid planck, built with a few ideals in mind:
 
@@ -23,8 +23,8 @@ This is a layout for the grid planck, built with a few ideals in mind:
 
 - Symbols should be arranged so that the most frequently used are easiest to
   reach. This includes numbers, and lower numbers are more commonly used than
-  higher ones. (number arrangement borrowed from [dustypomeleau's minidox
+  higher ones. (number arrangement borrowed from [dustypomeleau’s minidox
-  layout][].
+  layout][]).
 
-[dustypomeleau's minidox layout]: https://github.com/qmk/qmk_firmware/tree/master/keyboards/minidox/keymaps/dustypomerleau
+[dustypomeleau’s minidox layout]: https://github.com/qmk/qmk_firmware/tree/master/keyboards/minidox/keymaps/dustypomerleau
 [keymap.c]: keymap.c

keyboards/planck/keymaps/callum/rules.mk

@@ -1,19 +1,7 @@
-# Build Options
+BOOTMAGIC_ENABLE = no
-#   change to "no" to disable the options, or define them in the Makefile in
+MOUSEKEY_ENABLE = no
-#   the appropriate keymap folder that will get included automatically
+CONSOLE_ENABLE = no
-#
+COMMAND_ENABLE = yes
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MIDI_ENABLE = no
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+AUDIO_ENABLE = yes
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+RGBLIGHT_ENABLE = no
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = yes          # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
-
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend