[Keymap] Update ortho 4x12 jotix layout (#8425)

* ortho 4x12 jotix layout

* jotix ortho_4x12 layout

docs/_summary.md

@@ -18,7 +18,6 @@
   * [Overview](newbs_building_firmware_configurator.md)
   * [Step by Step](configurator_step_by_step.md)
   * [Troubleshooting](configurator_troubleshooting.md)
-  * [Problems and Bugs](configurator_problems.md)
   * QMK API
     * [Overview](api_overview.md)
     * [API Documentation](api_docs.md)
@@ -128,7 +127,6 @@
   * Python Development
     * [Coding Conventions](coding_conventions_python.md)
     * [QMK CLI Development](cli_development.md)
-    * [QMK CLI Config](cli_dev_configuration.md)
 
   * Configurator Development
     * QMK API

docs/cli.md

@@ -1,24 +1,14 @@
 # QMK CLI
 
-This page describes how to setup and use the QMK CLI.
+## Overview
-
-# Overview
 
 The QMK CLI makes building and working with QMK keyboards easier. We have provided a number of commands to simplify and streamline tasks such as obtaining and compiling the QMK firmware, creating keymaps, and more.
 
-* [Global CLI](#global-cli)
+### Requirements
-* [Local CLI](#local-cli)
-* [CLI Commands](#cli-commands)
 
-# Requirements
+The CLI requires Python 3.5 or greater. We try to keep the number of requirements small but you will also need to install the packages listed in [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt). These are installed automatically when you install the QMK CLI.
 
-The CLI requires Python 3.5 or greater. We try to keep the number of requirements small but you will also need to install the packages listed in [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt).
+### Install Using Homebrew (macOS, some Linux)
-
-# Global CLI
-
-QMK provides an installable CLI that can be used to setup your QMK build environment, work with QMK, and which makes working with multiple copies of `qmk_firmware` easier. We recommend installing and updating this periodically.
-
-## Install Using Homebrew (macOS, some Linux)
 
 If you have installed [Homebrew](https://brew.sh) you can tap and install QMK:
 
@@ -29,7 +19,7 @@ export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
 qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
 ```
 
-## Install Using easy_install or pip
+### Install Using easy_install or pip
 
 If your system is not listed above you can install QMK manually. First ensure that you have python 3.5 (or later) installed and have installed pip. Then install QMK with this command:
 
@@ -39,7 +29,7 @@ export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
 qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
 ```
 
-## Packaging For Other Operating Systems
+### Packaging For Other Operating Systems
 
 We are looking for people to create and maintain a `qmk` package for more operating systems. If you would like to create a package for your OS please follow these guidelines:
 
@@ -47,268 +37,3 @@ We are looking for people to create and maintain a `qmk` package for more operat
     * Document why in a comment when you do deviate
 * Install using a virtualenv
 * Instruct the user to set the environment variable `QMK_HOME` to have the firmware source checked out somewhere other than `~/qmk_firmware`.
-
-# Local CLI
-
-If you do not want to use the global CLI there is a local CLI bundled with `qmk_firmware`. You can find it in `qmk_firmware/bin/qmk`. You can run the `qmk` command from any directory and it will always operate on that copy of `qmk_firmware`.
-
-**Example**:
-
-```
-$ ~/qmk_firmware/bin/qmk hello
-Ψ Hello, World!
-```
-
-## Local CLI Limitations
-
-There are some limitations to the local CLI compared to the global CLI:
-
-* The local CLI does not support `qmk setup` or `qmk clone`
-* The local CLI always operates on the same `qmk_firmware` tree, even if you have multiple repositories cloned.
-* The local CLI does not run in a virtualenv, so it's possible that dependencies will conflict
-
-# CLI Commands
-
-## `qmk cformat`
-
-This command formats C code using clang-format. 
-
-Run it with no arguments to format all core code that has been changed. Default checks `origin/master` with `git diff`, branch can be changed using `-b <branch_name>`
-
-Run it with `-a` to format all core code, or pass filenames on the command line to run it on specific files.
-
-**Usage for specified files**:
-
-```
-qmk cformat [file1] [file2] [...] [fileN]
-```
-
-**Usage for all core files**:
-
-```
-qmk cformat -a
-```
-
-**Usage for only changed files against origin/master**:
-
-```
-qmk cformat
-```
-
-**Usage for only changed files against branch_name**:
-
-```
-qmk cformat -b branch_name
-```
-
-## `qmk compile`
-
-This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm>, compile keymaps in the repo, or compile the keyboard in the current working directory.
-
-**Usage for Configurator Exports**:
-
-```
-qmk compile <configuratorExport.json>
-```
-
-**Usage for Keymaps**:
-
-```
-qmk compile -kb <keyboard_name> -km <keymap_name>
-```
-
-**Usage in Keyboard Directory**:  
-
-Must be in keyboard directory with a default keymap, or in keymap directory for keyboard, or supply one with `--keymap <keymap_name>`
-```
-qmk compile
-```
-
-**Example**:
-```
-$ qmk config compile.keymap=default
-$ cd ~/qmk_firmware/keyboards/planck/rev6
-$ qmk compile
-Ψ Compiling keymap with make planck/rev6:default
-...
-```
-or with optional keymap argument
-
-```
-$ cd ~/qmk_firmware/keyboards/clueboard/66/rev4 
-$ qmk compile -km 66_iso
-Ψ Compiling keymap with make clueboard/66/rev4:66_iso
-...
-```
-or in keymap directory
-
-```
-$ cd ~/qmk_firmware/keyboards/gh60/satan/keymaps/colemak
-$ qmk compile
-Ψ Compiling keymap with make make gh60/satan:colemak
-...
-```
-
-**Usage in Layout Directory**:  
-
-Must be under `qmk_firmware/layouts/`, and in a keymap folder.
-```
-qmk compile -kb <keyboard_name>
-```
-
-**Example**:
-```
-$ cd ~/qmk_firmware/layouts/community/60_ansi/mechmerlin-ansi
-$ qmk compile -kb dz60
-Ψ Compiling keymap with make dz60:mechmerlin-ansi
-...
-```
-
-## `qmk flash`
-
-This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default.
-To specify a different bootloader, use `-bl <bootloader>`. Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
-
-**Usage for Configurator Exports**:
-
-```
-qmk flash <configuratorExport.json> -bl <bootloader>
-```
-
-**Usage for Keymaps**:
-
-```
-qmk flash -kb <keyboard_name> -km <keymap_name> -bl <bootloader>
-```
-
-**Listing the Bootloaders**
-
-```
-qmk flash -b
-```
-
-## `qmk config`
-
-This command lets you configure the behavior of QMK. For the full `qmk config` documentation see [CLI Configuration](cli_configuration.md).
-
-**Usage**:
-
-```
-qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
-```
-
-## `qmk docs`
-
-This command starts a local HTTP server which you can use for browsing or improving the docs. Default port is 8936.
-
-**Usage**:
-
-```
-qmk docs [-p PORT]
-```
-
-## `qmk doctor`
-
-This command examines your environment and alerts you to potential build or flash problems. It can fix many of them if you want it to.
-
-**Usage**:
-
-```
-qmk doctor [-y] [-n]
-```
-
-**Examples**:
-
-Check your environment for problems and prompt to fix them:
-
-    qmk doctor
-
-Check your environment and automatically fix any problems found:
-
-    qmk doctor -y
-
-Check your environment and report problems only:
-
-    qmk doctor -n
-
-## `qmk json2c`
-
-Creates a keymap.c from a QMK Configurator export.
-
-**Usage**:
-
-```
-qmk json2c [-o OUTPUT] filename
-```
-
-## `qmk kle2json`
-
-This command allows you to convert from raw KLE data to QMK Configurator JSON. It accepts either an absolute file path, or a file name in the current directory. By default it will not overwrite `info.json` if it is already present. Use the `-f` or `--force` flag to overwrite.
-
-**Usage**:
-
-```
-qmk kle2json [-f] <filename>
-```
-
-**Examples**:
-
-```
-$ qmk kle2json kle.txt 
-☒ File info.json already exists, use -f or --force to overwrite.
-```
-
-```
-$ qmk kle2json -f kle.txt -f
-Ψ Wrote out to info.json
-```
-
-## `qmk list-keyboards`
-
-This command lists all the keyboards currently defined in `qmk_firmware`
-
-**Usage**:
-
-```
-qmk list-keyboards
-```
-
-## `qmk list-keymaps`
-
-This command lists all the keymaps for a specified keyboard (and revision).
-
-**Usage**:
-
-```
-qmk list-keymaps -kb planck/ez
-```
-
-## `qmk new-keymap`
-
-This command creates a new keymap based on a keyboard's existing default keymap.
-
-**Usage**:
-
-```
-qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
-```
-
-## `qmk pyformat`
-
-This command formats python code in `qmk_firmware`.
-
-**Usage**:
-
-```
-qmk pyformat
-```
-
-## `qmk pytest`
-
-This command runs the python test suite. If you make changes to python code you should ensure this runs successfully.
-
-**Usage**:
-
-```
-qmk pytest
-```

docs/cli_commands.md

@@ -0,0 +1,247 @@
+# QMK CLI Commands
+
+# CLI Commands
+
+## `qmk cformat`
+
+This command formats C code using clang-format. 
+
+Run it with no arguments to format all core code that has been changed. Default checks `origin/master` with `git diff`, branch can be changed using `-b <branch_name>`
+
+Run it with `-a` to format all core code, or pass filenames on the command line to run it on specific files.
+
+**Usage for specified files**:
+
+```
+qmk cformat [file1] [file2] [...] [fileN]
+```
+
+**Usage for all core files**:
+
+```
+qmk cformat -a
+```
+
+**Usage for only changed files against origin/master**:
+
+```
+qmk cformat
+```
+
+**Usage for only changed files against branch_name**:
+
+```
+qmk cformat -b branch_name
+```
+
+## `qmk compile`
+
+This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm>, compile keymaps in the repo, or compile the keyboard in the current working directory.
+
+**Usage for Configurator Exports**:
+
+```
+qmk compile <configuratorExport.json>
+```
+
+**Usage for Keymaps**:
+
+```
+qmk compile -kb <keyboard_name> -km <keymap_name>
+```
+
+**Usage in Keyboard Directory**:  
+
+Must be in keyboard directory with a default keymap, or in keymap directory for keyboard, or supply one with `--keymap <keymap_name>`
+```
+qmk compile
+```
+
+**Example**:
+```
+$ qmk config compile.keymap=default
+$ cd ~/qmk_firmware/keyboards/planck/rev6
+$ qmk compile
+Ψ Compiling keymap with make planck/rev6:default
+...
+```
+or with optional keymap argument
+
+```
+$ cd ~/qmk_firmware/keyboards/clueboard/66/rev4 
+$ qmk compile -km 66_iso
+Ψ Compiling keymap with make clueboard/66/rev4:66_iso
+...
+```
+or in keymap directory
+
+```
+$ cd ~/qmk_firmware/keyboards/gh60/satan/keymaps/colemak
+$ qmk compile
+Ψ Compiling keymap with make make gh60/satan:colemak
+...
+```
+
+**Usage in Layout Directory**:  
+
+Must be under `qmk_firmware/layouts/`, and in a keymap folder.
+```
+qmk compile -kb <keyboard_name>
+```
+
+**Example**:
+```
+$ cd ~/qmk_firmware/layouts/community/60_ansi/mechmerlin-ansi
+$ qmk compile -kb dz60
+Ψ Compiling keymap with make dz60:mechmerlin-ansi
+...
+```
+
+## `qmk flash`
+
+This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default.
+To specify a different bootloader, use `-bl <bootloader>`. Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
+
+**Usage for Configurator Exports**:
+
+```
+qmk flash <configuratorExport.json> -bl <bootloader>
+```
+
+**Usage for Keymaps**:
+
+```
+qmk flash -kb <keyboard_name> -km <keymap_name> -bl <bootloader>
+```
+
+**Listing the Bootloaders**
+
+```
+qmk flash -b
+```
+
+## `qmk config`
+
+This command lets you configure the behavior of QMK. For the full `qmk config` documentation see [CLI Configuration](cli_configuration.md).
+
+**Usage**:
+
+```
+qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
+```
+
+## `qmk docs`
+
+This command starts a local HTTP server which you can use for browsing or improving the docs. Default port is 8936.
+
+**Usage**:
+
+```
+qmk docs [-p PORT]
+```
+
+## `qmk doctor`
+
+This command examines your environment and alerts you to potential build or flash problems. It can fix many of them if you want it to.
+
+**Usage**:
+
+```
+qmk doctor [-y] [-n]
+```
+
+**Examples**:
+
+Check your environment for problems and prompt to fix them:
+
+    qmk doctor
+
+Check your environment and automatically fix any problems found:
+
+    qmk doctor -y
+
+Check your environment and report problems only:
+
+    qmk doctor -n
+
+## `qmk json2c`
+
+Creates a keymap.c from a QMK Configurator export.
+
+**Usage**:
+
+```
+qmk json2c [-o OUTPUT] filename
+```
+
+## `qmk kle2json`
+
+This command allows you to convert from raw KLE data to QMK Configurator JSON. It accepts either an absolute file path, or a file name in the current directory. By default it will not overwrite `info.json` if it is already present. Use the `-f` or `--force` flag to overwrite.
+
+**Usage**:
+
+```
+qmk kle2json [-f] <filename>
+```
+
+**Examples**:
+
+```
+$ qmk kle2json kle.txt 
+☒ File info.json already exists, use -f or --force to overwrite.
+```
+
+```
+$ qmk kle2json -f kle.txt -f
+Ψ Wrote out to info.json
+```
+
+## `qmk list-keyboards`
+
+This command lists all the keyboards currently defined in `qmk_firmware`
+
+**Usage**:
+
+```
+qmk list-keyboards
+```
+
+## `qmk list-keymaps`
+
+This command lists all the keymaps for a specified keyboard (and revision).
+
+**Usage**:
+
+```
+qmk list-keymaps -kb planck/ez
+```
+
+## `qmk new-keymap`
+
+This command creates a new keymap based on a keyboard's existing default keymap.
+
+**Usage**:
+
+```
+qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
+```
+
+## `qmk pyformat`
+
+This command formats python code in `qmk_firmware`.
+
+**Usage**:
+
+```
+qmk pyformat
+```
+
+## `qmk pytest`
+
+This command runs the python test suite. If you make changes to python code you should ensure this runs successfully.
+
+**Usage**:
+
+```
+qmk pytest
+```

docs/feature_oled_driver.md

@@ -261,12 +261,24 @@ void oled_task(void);
 // Called at the start of oled_task, weak function overridable by the user
 void oled_task_user(void);
 
-// Scrolls the entire display right
+// Set the specific 8 lines rows of the screen to scroll.
+// 0 is the default for start, and 7 for end, which is the entire
+// height of the screen.  For 128x32 screens, rows 4-7 are not used.
+void oled_scroll_set_area(uint8_t start_line, uint8_t end_line);
+
+// Sets scroll speed, 0-7, fastest to slowest. Default is three.
+// Does not take effect until scrolling is either started or restarted
+// the ssd1306 supports 8 speeds with the delay
+// listed below betwen each frame of the scrolling effect
+// 0=2, 1=3, 2=4, 3=5, 4=25, 5=64, 6=128, 7=256
+void oled_scroll_set_speed(uint8_t speed);
+
+// Begin scrolling the entire display right
 // Returns true if the screen was scrolling or starts scrolling
 // NOTE: display contents cannot be changed while scrolling
 bool oled_scroll_right(void);
 
-// Scrolls the entire display left
+// Begin scrolling the entire display left
 // Returns true if the screen was scrolling or starts scrolling
 // NOTE: display contents cannot be changed while scrolling
 bool oled_scroll_left(void);

docs/i2c_driver.md

@@ -2,27 +2,40 @@
 
 The I2C Master drivers used in QMK have a set of common functions to allow portability between MCUs.
 
+## An important note on I2C Addresses
+
+All of the addresses expected by this driver should be pushed to the upper 7 bits of the address byte.  Setting
+the lower bit (indicating read/write) will be done by the respective functions.  Almost all I2C addresses listed 
+on datasheets and the internet will be represented as 7 bits occupying the lower 7 bits and will need to be
+shifted to the left (more significant) by one bit.  This is easy to do via the bitwise shift operator `<< 1`.
+
+You can either do this on each call to the functions below, or once in your definition of the address.  For example if your device has an address of `0x18`:
+
+`#define MY_I2C_ADDRESS (0x18 << 1)`
+
+See https://www.robot-electronics.co.uk/i2c-tutorial for more information about I2C addressing and other technical details.
+
 ## Available functions
 
 |Function                                                                                                          |Description                                                                                                                                                                  |
 |------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
 |`void i2c_init(void);`                                                                                            |Initializes the I2C driver. This function should be called once before any transaction is initiated.                                                                         |
-|`uint8_t i2c_start(uint8_t address, uint16_t timeout);`                                                                             |Starts an I2C transaction. Address is the 7-bit slave address without the direction bit.                                                                                     |
+|`i2c_status_t i2c_start(uint8_t address, uint16_t timeout);`                                                                             |Starts an I2C transaction. Address is the 7-bit slave address without the direction bit.                                                                                     |
-|`uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                        |Transmit data over I2C. Address is the 7-bit slave address without the direction. Returns status of transaction.                                                             |
+|`i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                        |Transmit data over I2C. Address is the 7-bit slave address without the direction. Returns status of transaction.                                                             |
-|`uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                         |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. |
+|`i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);`                         |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. |
-|`uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`       |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written.                                                                          |
+|`i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`       |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written.                                                                          |
-|`uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`        |Same as the `i2c_receive` function but `regaddr` sets from where in the slave the data will be read.                                                                         |
+|`i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);`        |Same as the `i2c_receive` function but `regaddr` sets from where in the slave the data will be read.                                                                         |
-|`uint8_t i2c_stop(void);`                                                                                         |Ends an I2C transaction.                                                                                                                                                     |
+|`i2c_status_t i2c_stop(void);`                                                                                         |Ends an I2C transaction.                                                                                                                                                     |
 
 ### Function Return
 
 All the above functions, except `void i2c_init(void);` return the following truth table:
 
-|Return Value   |Description                                        |
+|Return Constant     |Value|Description                     |
-|---------------|---------------------------------------------------|
+|--------------------|-----|--------------------------------|
-|0              |Operation executed successfully.                   |
+|`I2C_STATUS_SUCCESS`|0    |Operation executed successfully.|
-|-1             |Operation failed.                                  |
+|`I2C_STATUS_ERROR`  |-1   |Operation failed.               |
-|-2             |Operation timed out.                               |
+|`I2C_STATUS_TIMEOUT`|-2   |Operation timed out.            |
 
 
 ## AVR

docs/index.html

@@ -33,6 +33,7 @@
         // Moved pages
         '/adding_a_keyboard_to_qmk': '/hardware_keyboard_guidelines',
         '/build_environment_setup': '/getting_started_build_tools',
+        '/cli_dev_configuration': '/cli_configuration',
         '/dynamic_macros': '/feature_dynamic_macros',
         '/feature_common_shortcuts': '/feature_advanced_keycodes',
         '/glossary': '/reference_glossary',

docs/other_eclipse.md

@@ -17,7 +17,7 @@ Note that this set-up has been tested on Ubuntu 16.04 only for the moment.
 
 # Prerequisites
 ## Build Environment
-Before starting, you must have followed the [Getting Started](news_getting_started.md) section of the Tutorial. In particular, you must have been able to build the firmware with [the `qmk compile` command](news_building_firmware#build-your-firmware).
+Before starting, you must have followed the [Getting Started](newbs_getting_started.md) section of the Tutorial. In particular, you must have been able to build the firmware with [the `qmk compile` command](newbs_building_firmware.md#build-your-firmware).
 
 ## Java
 Eclipse is a Java application, so you will need to install Java 8 or more recent to be able to run it. You may choose between the JRE or the JDK, the latter being useful if you intend to do Java development.

drivers/avr/pro_micro.h

@@ -1,324 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-// Workaround for wrong definitions in "iom32u4.h".
-// This should be fixed in the AVR toolchain.
-#undef UHCON
-#undef UHINT
-#undef UHIEN
-#undef UHADDR
-#undef UHFNUM
-#undef UHFNUML
-#undef UHFNUMH
-#undef UHFLEN
-#undef UPINRQX
-#undef UPINTX
-#undef UPNUM
-#undef UPRST
-#undef UPCONX
-#undef UPCFG0X
-#undef UPCFG1X
-#undef UPSTAX
-#undef UPCFG2X
-#undef UPIENX
-#undef UPDATX
-#undef TCCR2A
-#undef WGM20
-#undef WGM21
-#undef COM2B0
-#undef COM2B1
-#undef COM2A0
-#undef COM2A1
-#undef TCCR2B
-#undef CS20
-#undef CS21
-#undef CS22
-#undef WGM22
-#undef FOC2B
-#undef FOC2A
-#undef TCNT2
-#undef TCNT2_0
-#undef TCNT2_1
-#undef TCNT2_2
-#undef TCNT2_3
-#undef TCNT2_4
-#undef TCNT2_5
-#undef TCNT2_6
-#undef TCNT2_7
-#undef OCR2A
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-#undef OCR2B
-#undef OCR2_0
-#undef OCR2_1
-#undef OCR2_2
-#undef OCR2_3
-#undef OCR2_4
-#undef OCR2_5
-#undef OCR2_6
-#undef OCR2_7
-
-#define NUM_DIGITAL_PINS 30
-#define NUM_ANALOG_INPUTS 12
-
-#define TX_RX_LED_INIT DDRD |= (1 << 5), DDRB |= (1 << 0)
-#define TXLED0 PORTD |= (1 << 5)
-#define TXLED1 PORTD &= ~(1 << 5)
-#define RXLED0 PORTB |= (1 << 0)
-#define RXLED1 PORTB &= ~(1 << 0)
-
-static const uint8_t SDA = 2;
-static const uint8_t SCL = 3;
-#define LED_BUILTIN 13
-
-// Map SPI port to 'new' pins D14..D17
-static const uint8_t SS   = 17;
-static const uint8_t MOSI = 16;
-static const uint8_t MISO = 14;
-static const uint8_t SCK  = 15;
-
-// Mapping of analog pins as digital I/O
-// A6-A11 share with digital pins
-static const uint8_t ADC0  = 18;
-static const uint8_t ADC1  = 19;
-static const uint8_t ADC2  = 20;
-static const uint8_t ADC3  = 21;
-static const uint8_t ADC4  = 22;
-static const uint8_t ADC5  = 23;
-static const uint8_t ADC6  = 24;  // D4
-static const uint8_t ADC7  = 25;  // D6
-static const uint8_t ADC8  = 26;  // D8
-static const uint8_t ADC9  = 27;  // D9
-static const uint8_t ADC10 = 28;  // D10
-static const uint8_t ADC11 = 29;  // D12
-
-#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
-#define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) (((p) >= 8 && (p) <= 11) ? (p)-4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
-
-//  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
-extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P) (pgm_read_byte(analog_pin_to_channel_PGM + (P)))
-
-#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
-
-#ifdef ARDUINO_MAIN
-
-// On the Arduino board, digital pins are also used
-// for the analog output (software PWM).  Analog input
-// pins are a separate set.
-
-// ATMEL ATMEGA32U4 / ARDUINO LEONARDO
-//
-// D0               PD2                 RXD1/INT2
-// D1               PD3                 TXD1/INT3
-// D2               PD1     SDA         SDA/INT1
-// D3#              PD0     PWM8/SCL    OC0B/SCL/INT0
-// D4       A6      PD4                 ADC8
-// D5#              PC6     ???         OC3A/#OC4A
-// D6#      A7      PD7     FastPWM     #OC4D/ADC10
-// D7               PE6                 INT6/AIN0
-//
-// D8       A8      PB4                 ADC11/PCINT4
-// D9#      A9      PB5     PWM16       OC1A/#OC4B/ADC12/PCINT5
-// D10#     A10     PB6     PWM16       OC1B/0c4B/ADC13/PCINT6
-// D11#             PB7     PWM8/16     0C0A/OC1C/#RTS/PCINT7
-// D12      A11     PD6                 T1/#OC4D/ADC9
-// D13#             PC7     PWM10       CLK0/OC4A
-//
-// A0       D18     PF7                 ADC7
-// A1       D19     PF6                 ADC6
-// A2       D20     PF5                 ADC5
-// A3       D21     PF4                 ADC4
-// A4       D22     PF1                 ADC1
-// A5       D23     PF0                 ADC0
-//
-// New pins D14..D17 to map SPI port to digital pins
-//
-// MISO     D14     PB3                 MISO,PCINT3
-// SCK      D15     PB1                 SCK,PCINT1
-// MOSI     D16     PB2                 MOSI,PCINT2
-// SS       D17     PB0                 RXLED,SS/PCINT0
-//
-// Connected LEDs on board for TX and RX
-// TXLED    D24     PD5                 XCK1
-// RXLED    D17     PB0
-// HWB              PE2                 HWB
-
-// these arrays map port names (e.g. port B) to the
-// appropriate addresses for various functions (e.g. reading
-// and writing)
-const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT, NOT_A_PORT, (uint16_t)&DDRB, (uint16_t)&DDRC, (uint16_t)&DDRD, (uint16_t)&DDRE, (uint16_t)&DDRF,
-};
-
-const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT, NOT_A_PORT, (uint16_t)&PORTB, (uint16_t)&PORTC, (uint16_t)&PORTD, (uint16_t)&PORTE, (uint16_t)&PORTF,
-};
-
-const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT, NOT_A_PORT, (uint16_t)&PINB, (uint16_t)&PINC, (uint16_t)&PIND, (uint16_t)&PINE, (uint16_t)&PINF,
-};
-
-const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD,  // D0 - PD2
-    PD,  // D1 - PD3
-    PD,  // D2 - PD1
-    PD,  // D3 - PD0
-    PD,  // D4 - PD4
-    PC,  // D5 - PC6
-    PD,  // D6 - PD7
-    PE,  // D7 - PE6
-
-    PB,  // D8 - PB4
-    PB,  // D9 - PB5
-    PB,  // D10 - PB6
-    PB,  // D11 - PB7
-    PD,  // D12 - PD6
-    PC,  // D13 - PC7
-
-    PB,  // D14 - MISO - PB3
-    PB,  // D15 - SCK - PB1
-    PB,  // D16 - MOSI - PB2
-    PB,  // D17 - SS - PB0
-
-    PF,  // D18 - A0 - PF7
-    PF,  // D19 - A1 - PF6
-    PF,  // D20 - A2 - PF5
-    PF,  // D21 - A3 - PF4
-    PF,  // D22 - A4 - PF1
-    PF,  // D23 - A5 - PF0
-
-    PD,  // D24 - PD5
-    PD,  // D25 / D6 - A7 - PD7
-    PB,  // D26 / D8 - A8 - PB4
-    PB,  // D27 / D9 - A9 - PB5
-    PB,  // D28 / D10 - A10 - PB6
-    PD,  // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2),  // D0 - PD2
-    _BV(3),  // D1 - PD3
-    _BV(1),  // D2 - PD1
-    _BV(0),  // D3 - PD0
-    _BV(4),  // D4 - PD4
-    _BV(6),  // D5 - PC6
-    _BV(7),  // D6 - PD7
-    _BV(6),  // D7 - PE6
-
-    _BV(4),  // D8 - PB4
-    _BV(5),  // D9 - PB5
-    _BV(6),  // D10 - PB6
-    _BV(7),  // D11 - PB7
-    _BV(6),  // D12 - PD6
-    _BV(7),  // D13 - PC7
-
-    _BV(3),  // D14 - MISO - PB3
-    _BV(1),  // D15 - SCK - PB1
-    _BV(2),  // D16 - MOSI - PB2
-    _BV(0),  // D17 - SS - PB0
-
-    _BV(7),  // D18 - A0 - PF7
-    _BV(6),  // D19 - A1 - PF6
-    _BV(5),  // D20 - A2 - PF5
-    _BV(4),  // D21 - A3 - PF4
-    _BV(1),  // D22 - A4 - PF1
-    _BV(0),  // D23 - A5 - PF0
-
-    _BV(5),  // D24 - PD5
-    _BV(7),  // D25 / D6 - A7 - PD7
-    _BV(4),  // D26 / D8 - A8 - PB4
-    _BV(5),  // D27 / D9 - A9 - PB5
-    _BV(6),  // D28 / D10 - A10 - PB6
-    _BV(6),  // D29 / D12 - A11 - PD6
-};
-
-const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, TIMER0B, /* 3 */
-    NOT_ON_TIMER, TIMER3A,                             /* 5 */
-    TIMER4D,                                           /* 6 */
-    NOT_ON_TIMER,
-
-    NOT_ON_TIMER, TIMER1A, /* 9 */
-    TIMER1B,               /* 10 */
-    TIMER0A,               /* 11 */
-
-    NOT_ON_TIMER, TIMER4A, /* 13 */
-
-    NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER,
-
-    NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER,
-};
-
-const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,   // A0               PF7                 ADC7
-    6,   // A1               PF6                 ADC6
-    5,   // A2               PF5                 ADC5
-    4,   // A3               PF4                 ADC4
-    1,   // A4               PF1                 ADC1
-    0,   // A5               PF0                 ADC0
-    8,   // A6       D4      PD4                 ADC8
-    10,  // A7       D6      PD7                 ADC10
-    11,  // A8       D8      PB4                 ADC11
-    12,  // A9       D9      PB5                 ADC12
-    13,  // A10      D10     PB6                 ADC13
-    9    // A11      D12     PD6                 ADC9
-};
-
-#endif /* ARDUINO_MAIN */
-
-// These serial port names are intended to allow libraries and architecture-neutral
-// sketches to automatically default to the correct port name for a particular type
-// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
-// the first hardware serial port whose RX/TX pins are not dedicated to another use.
-//
-// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
-//
-// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
-//
-// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
-//
-// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
-//
-// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
-//                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR Serial
-#define SERIAL_PORT_USBVIRTUAL Serial
-#define SERIAL_PORT_HARDWARE Serial1
-#define SERIAL_PORT_HARDWARE_OPEN Serial1
-
-#endif /* Pins_Arduino_h */

drivers/oled/oled_driver.c

@@ -108,6 +108,9 @@ bool            oled_active         = false;
 bool            oled_scrolling      = false;
 uint8_t         oled_rotation       = 0;
 uint8_t         oled_rotation_width = 0;
+uint8_t         oled_scroll_speed   = 0;  // this holds the speed after being remapped to ssd1306 internal values
+uint8_t         oled_scroll_start   = 0;
+uint8_t         oled_scroll_end     = 7;
 #if OLED_TIMEOUT > 0
 uint32_t oled_timeout;
 #endif
@@ -515,12 +518,37 @@ bool oled_off(void) {
     return !oled_active;
 }
 
+// Set the specific 8 lines rows of the screen to scroll.
+// 0 is the default for start, and 7 for end, which is the entire
+// height of the screen.  For 128x32 screens, rows 4-7 are not used.
+void oled_scroll_set_area(uint8_t start_line, uint8_t end_line) {
+    oled_scroll_start = start_line;
+    oled_scroll_end   = end_line;
+}
+
+void oled_scroll_set_speed(uint8_t speed) {
+    // Sets the speed for scrolling... does not take effect
+    // until scrolling is either started or restarted
+    // the ssd1306 supports 8 speeds
+    // FrameRate2   speed = 7
+    // FrameRate3   speed = 4
+    // FrameRate4   speed = 5
+    // FrameRate5   speed = 0
+    // FrameRate25  speed = 6
+    // FrameRate64  speed = 1
+    // FrameRate128 speed = 2
+    // FrameRate256 speed = 3
+    // for ease of use these are remaped here to be in order
+    static const uint8_t scroll_remap[8] = {7, 4, 5, 0, 6, 1, 2, 3};
+    oled_scroll_speed                    = scroll_remap[speed];
+}
+
 bool oled_scroll_right(void) {
     // Dont enable scrolling if we need to update the display
     // This prevents scrolling of bad data from starting the scroll too early after init
     if (!oled_dirty && !oled_scrolling) {
-        static const uint8_t PROGMEM display_scroll_right[] = {I2C_CMD, SCROLL_RIGHT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL};
+        uint8_t display_scroll_right[] = {I2C_CMD, SCROLL_RIGHT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL};
-        if (I2C_TRANSMIT_P(display_scroll_right) != I2C_STATUS_SUCCESS) {
+        if (I2C_TRANSMIT(display_scroll_right) != I2C_STATUS_SUCCESS) {
             print("oled_scroll_right cmd failed\n");
             return oled_scrolling;
         }
@@ -533,8 +561,8 @@ bool oled_scroll_left(void) {
     // Dont enable scrolling if we need to update the display
     // This prevents scrolling of bad data from starting the scroll too early after init
     if (!oled_dirty && !oled_scrolling) {
-        static const uint8_t PROGMEM display_scroll_left[] = {I2C_CMD, SCROLL_LEFT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL};
+        uint8_t display_scroll_left[] = {I2C_CMD, SCROLL_LEFT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL};
-        if (I2C_TRANSMIT_P(display_scroll_left) != I2C_STATUS_SUCCESS) {
+        if (I2C_TRANSMIT(display_scroll_left) != I2C_STATUS_SUCCESS) {
             print("oled_scroll_left cmd failed\n");
             return oled_scrolling;
         }

drivers/oled/oled_driver.h

@@ -246,6 +246,18 @@ void oled_task(void);
 // Called at the start of oled_task, weak function overridable by the user
 void oled_task_user(void);
 
+// Set the specific 8 lines rows of the screen to scroll.
+// 0 is the default for start, and 7 for end, which is the entire
+// height of the screen.  For 128x32 screens, rows 4-7 are not used.
+void oled_scroll_set_area(uint8_t start_line, uint8_t end_line);
+
+// Sets scroll speed, 0-7, fastest to slowest. Default is three.
+// Does not take effect until scrolling is either started or restarted
+// the ssd1306 supports 8 speeds with the delay
+// listed below betwen each frame of the scrolling effect
+// 0=2, 1=3, 2=4, 3=5, 4=25, 5=64, 6=128, 7=256
+void oled_scroll_set_speed(uint8_t speed);
+
 // Scrolls the entire display right
 // Returns true if the screen was scrolling or starts scrolling
 // NOTE: display contents cannot be changed while scrolling

keyboards/claw44/rev1/matrix.c

@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
-#include "pro_micro.h"
+#include "quantum.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -102,9 +102,10 @@ void matrix_init(void)
     unselect_rows();
     init_cols();
 
-    TX_RX_LED_INIT;
+    setPinOutput(B0);
-    TXLED0;
+    setPinOutput(D5);
-    RXLED0;
+    writePinHigh(B0);
+    writePinHigh(D5);
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -189,10 +190,10 @@ int serial_transaction(int master_changed) {
     int ret=serial_update_buffers();
 #endif
     if (ret ) {
-        if(ret==2) RXLED1;
+        if(ret==2) writePinLow(B0);
         return 1;
     }
-    RXLED0;
+    writePinHigh(B0);
     memcpy(&matrix[slaveOffset],
         (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH);
     return 0;
@@ -241,7 +242,7 @@ uint8_t matrix_master_scan(void) {
     if( serial_transaction(mchanged) ) {
 #endif
         // turn on the indicator led when halves are disconnected
-        TXLED1;
+        writePinLow(D5);
 
         error_count++;
 
@@ -254,7 +255,7 @@ uint8_t matrix_master_scan(void) {
         }
     } else {
         // turn off the indicator led on no error
-        TXLED0;
+        writePinHigh(D5);
         error_count = 0;
     }
     matrix_scan_quantum();

keyboards/crkbd/rev1/matrix.c

@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
-#include "pro_micro.h"
+#include "quantum.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -96,37 +96,38 @@ uint8_t matrix_cols(void)
 void tx_rx_leds_init(void)
 {
 #ifndef NO_DEBUG_LEDS
-    TX_RX_LED_INIT;
+    setPinOutput(B0);
-    TXLED0;
+    setPinOutput(D5);
-    RXLED0;
+    writePinHigh(B0);
+    writePinHigh(D5);
 #endif
 }
 
 void tx_led_on(void)
 {
 #ifndef NO_DEBUG_LEDS
-    TXLED1;
+    writePinLow(D5);
 #endif
 }
 
 void tx_led_off(void)
 {
 #ifndef NO_DEBUG_LEDS
-    TXLED0;
+    writePinHigh(D5);
 #endif
 }
 
 void rx_led_on(void)
 {
 #ifndef NO_DEBUG_LEDS
-    RXLED1;
+    writePinLow(B0);
 #endif
 }
 
 void rx_led_off(void)
 {
 #ifndef NO_DEBUG_LEDS
-    RXLED0;
+    writePinHigh(B0);
 #endif
 }
 

keyboards/doro67/multi/config.h

@@ -3,8 +3,8 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x4250 // BP for Backprop
-#define PRODUCT_ID      0xD070
+#define PRODUCT_ID      0x4D4C // ML for Multi
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Backprop Studio
 #define PRODUCT         Doro67 Multi PCB

keyboards/doro67/multi/keymaps/via/keymap.c

@@ -0,0 +1,76 @@
+/* Copyright 2019 ShadeDream
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Default layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+     * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace │Ins│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │Del│
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │LCtl│LGui│LAlt│         Space          │RAlt│ Fn │ │ ← │ ↓ │ → │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [0] = LAYOUT_65_ansi_blocker(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_INS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_PGUP,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    /* Fn layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+     * │ ` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│       │   │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+     * │BLTog│BLS│BL-│BL+│Rst│   │   │   │   │   │   │   │   │     │   │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │      │   │   │   │   │   │   │   │   │   │   │   │        │   │
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │        │   │   │   │   │   │   │   │   │   │   │      │   │   │
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │    │    │    │                        │    │    │ │   │   │   │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [1] = LAYOUT_65_ansi_blocker(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,          _______,
+        BL_TOGG, BL_STEP, BL_DEC,  BL_INC,  RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______,          _______, _______, _______
+    ),
+
+    [2] = LAYOUT_65_ansi_blocker(
+        _______, _______,  _______, _______,   _______, _______,  _______, _______,   _______, _______,  _______, _______,  _______,  _______, _______,
+        _______, _______,  _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+
+     [3] = LAYOUT_65_ansi_blocker(
+        _______, _______,  _______, _______,   _______, _______,  _______, _______,   _______, _______,  _______, _______,  _______,  _______, _______,
+        _______, _______,  _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+};

keyboards/doro67/multi/keymaps/via/readme.md

@@ -0,0 +1,43 @@
+# Default Doro67 ANSI layout.
+
+**THIS IS THE DEFAULT ANSI KEYMAP (AVAILABILITY: CHINA + INTERNATIONAL GB)**
+The "multi" directory includes keymaps for the multi-layout PCB, which supports ANSI, ISO, and multi (split backspace & non-blocker).
+The keymap you choose from the "multi" directory must correspond to the integrated plate option you chose.
+
+The multi-layout PCB and RGB pcb were the only two options available to NON-china buyers.
+If you purchased an RGB PCB, please see the 'rgb' directory.
+
+This is the default ANSI layout that comes flashed on the Doro67 multi PCB with
+the exception of adding backtick as it was not mapped.
+
+Default layer:
+
+```
+┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+│Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace │Ins│
+├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+│ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │Del│
+├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+│ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
+├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+│ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│
+├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+│LCtl│LGui│LAlt│         Space          │RAlt│ Fn │ │ ← │ ↓ │ → │
+└────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+```
+
+Fn layer:
+
+```
+┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+│ ` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│       │   │
+├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+│BLTog│BLS│BL-│BL+│Rst│   │   │   │   │   │   │   │   │     │   │
+├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+│      │   │   │   │   │   │   │   │   │   │   │   │        │   │
+├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+│        │   │   │   │   │   │   │   │   │   │   │      │   │   │
+├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+│    │    │    │                        │    │    │ │   │   │   │
+└────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+```

keyboards/doro67/multi/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/doro67/regular/config.h

@@ -3,8 +3,8 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x4250 // BP for Backprop
-#define PRODUCT_ID      0x0000
+#define PRODUCT_ID      0x5245 // RE for Regular
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Backprop Studio
 #define PRODUCT         Doro67 Regular PCB
@@ -28,4 +28,3 @@
 #define MATRIX_COL_PINS { B0, B1, B2, B3, D4, D6, D7, B4, B5, B6, C6, C7, F5, F6, F7 }
 
 #define DIODE_DIRECTION COL2ROW
-

keyboards/doro67/regular/keymaps/via/keymap.c

@@ -0,0 +1,76 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Default layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+     * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace │Ins│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │Del│
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │LCtl│LGui│LAlt│         Space          │RAlt│ Fn │ │ ← │ ↓ │ → │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [0] = LAYOUT_65_ansi_blocker(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    /* Fn layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+     * │ ` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│       │   │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+     * │     │   │   │   │Rst│   │   │   │   │   │   │   │   │     │   │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │      │   │   │   │   │   │   │   │   │   │   │   │        │   │
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │        │   │   │   │   │   │   │   │   │   │   │      │   │   │
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │    │    │    │                        │    │    │ │   │   │   │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [1] = LAYOUT_65_ansi_blocker(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+
+    [2] = LAYOUT_65_ansi_blocker(
+        _______, _______,  _______, _______,   _______, _______,  _______, _______,   _______, _______,  _______, _______,  _______,  _______, _______,
+        _______, _______,  _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+
+    [3] = LAYOUT_65_ansi_blocker(
+        _______, _______,  _______, _______,   _______, _______,  _______, _______,   _______, _______,  _______, _______,  _______,  _______, _______,
+        _______, _______,  _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+};

keyboards/doro67/regular/keymaps/via/readme.md

@@ -0,0 +1,5 @@
+# The default keymap for doro67
+
+**THIS IS THE DEFAULT KEYMAP DIRECTORY (AVAILABILITY: CHINA GB ONLY)**
+If you are a non-china buyer, you probably have the multi PCB or rgb PCB. 
+Please look at the "multi" and "rgb" readme files.

keyboards/doro67/regular/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/doro67/rgb/config.h

@@ -20,8 +20,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x4250 // BP for Backprop
-#define PRODUCT_ID      0x0000
+#define PRODUCT_ID      0x5247 // RG for RGB
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Backprop Studio
 #define PRODUCT         Doro67 RGB PCB

keyboards/doro67/rgb/keymaps/via/keymap.c

@@ -0,0 +1,77 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Default layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+     * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace │Ins│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │Del│
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │LCtl│LGui│LAlt│         Space          │RAlt│ Fn │ │ ← │ ↓ │ → │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [0] = LAYOUT_65_ansi_blocker(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    /* Fn layer
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
+     * │ ` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│       │   │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
+     * │BEST │URL│   │   │Rst│   │   │   │   │   │   │   │   │     │   │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
+     * │ RGB  │Mo+│Hu+│Sa+│Va+│Sp+│   │   │   │   │   │   │        │   │
+     * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
+     * │        │Mo-│Hu-│Sa-│Va-│Sp-│   │   │   │   │   │      │   │   │
+     * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+     * │    │    │    │                        │    │    │ │   │   │   │
+     * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
+     */
+    [1] = LAYOUT_65_ansi_blocker(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______,  _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+
+    [2] = LAYOUT_65_ansi_blocker(
+        _______, _______,  _______, _______,   _______, _______,  _______, _______,   _______, _______,  _______, _______,  _______,  _______, _______,
+        _______, _______,  _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+
+    [3] = LAYOUT_65_ansi_blocker(
+        _______, _______,  _______, _______,   _______, _______,  _______, _______,   _______, _______,  _______, _______,  _______,  _______, _______,
+        _______, _______,  _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______,          _______, _______, _______
+    ),
+};
+

keyboards/doro67/rgb/keymaps/via/readme.md

@@ -0,0 +1,7 @@
+# The default keymap for rgb
+
+**RGB PCB (AVAILABILITY: CHINA + INTERNATIONAL GB)**
+The "rgb" directory includes the keymap for the RGB PCB.
+
+The multi-layout PCB and RGB pcb were the only two options available to NON-china buyers.
+If you purchased a non-rgb PCB, please see the 'multi' directory.

keyboards/doro67/rgb/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/ergoinu/matrix.c

@@ -29,24 +29,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
+#include "quantum.h"
 
 #include "serial.h"
 
-// from pro_micro.h
-#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
-
-#ifndef DISABLE_PROMICRO_LEDs
-  #define TXLED0          PORTD |= (1<<5)
-  #define TXLED1          PORTD &= ~(1<<5)
-  #define RXLED0          PORTB |= (1<<0)
-  #define RXLED1          PORTB &= ~(1<<0)
-#else
-  #define TXLED0
-  #define TXLED1
-  #define RXLED0
-  #define RXLED1
-#endif
-
 #ifndef DEBOUNCE
 #  define DEBOUNCE	5
 #endif
@@ -108,11 +94,12 @@ void matrix_init(void) {
   unselect_rows();
   init_cols();
 
-  TX_RX_LED_INIT;
+  setPinOutput(B0);
+  setPinOutput(D5);
 
   #ifdef DISABLE_PROMICRO_LEDs
-    PORTD |= (1<<5);
+    writePinHigh(B0);
-    PORTB |= (1<<0);
+    writePinHigh(D5);
   #endif
 
   // initialize matrix state: all keys off
@@ -158,10 +145,14 @@ int serial_transaction(void) {
   int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
   int ret=serial_update_buffers();
   if (ret ) {
-      if(ret==2)RXLED1;
+#ifndef DISABLE_PROMICRO_LEDs
+      if(ret==2) writePinLow(B0);
+#endif
       return 1;
   }
-RXLED0;
+#ifndef DISABLE_PROMICRO_LEDs
+  writePinHigh(B0);
+#endif
   for (int i = 0; i < ROWS_PER_HAND; ++i) {
       matrix[slaveOffset+i] = serial_slave_buffer[i];
   }
@@ -197,8 +188,10 @@ uint8_t matrix_master_scan(void) {
   }
 
   if( serial_transaction() ) {
+#ifndef DISABLE_PROMICRO_LEDs
     // turn on the indicator led when halves are disconnected
-    TXLED1;
+    writePinLow(D5);
+#endif
 
     error_count++;
 
@@ -210,8 +203,10 @@ uint8_t matrix_master_scan(void) {
       }
     }
   } else {
+#ifndef DISABLE_PROMICRO_LEDs
     // turn off the indicator led on no error
-    TXLED0;
+    writePinHigh(D5);
+#endif
     error_count = 0;
   }
   matrix_scan_quantum();

keyboards/handwired/not_so_minidox/matrix.c

@@ -29,8 +29,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
-#include "pro_micro.h"
 #include "config.h"
+#include "quantum.h"
 
 #ifdef USE_I2C
 #  include "i2c.h"
@@ -100,7 +100,8 @@ void matrix_init(void)
     unselect_rows();
     init_cols();
 
-    TX_RX_LED_INIT;
+    setPinOutput(B0);
+    setPinOutput(D5);
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -201,7 +202,7 @@ uint8_t matrix_scan(void)
     if( serial_transaction() ) {
 #endif
         // turn on the indicator led when halves are disconnected
-        TXLED1;
+        writePinLow(D5);
 
         error_count++;
 
@@ -214,7 +215,7 @@ uint8_t matrix_scan(void)
         }
     } else {
         // turn off the indicator led on no error
-        TXLED0;
+        writePinHigh(D5);
         error_count = 0;
     }
     matrix_scan_quantum();

keyboards/helix/pico/matrix.c

@@ -29,7 +29,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
-#include "pro_micro.h"
+#include "quantum.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -99,9 +99,10 @@ void matrix_init(void)
     unselect_rows();
     init_cols();
 
-    TX_RX_LED_INIT;
+    setPinOutput(B0);
-    TXLED0;
+    setPinOutput(D5);
-    RXLED0;
+    writePinHigh(B0);
+    writePinHigh(D5);
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -180,10 +181,10 @@ int serial_transaction(void) {
     int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
     int ret=serial_update_buffers();
     if (ret ) {
-        if(ret==2)RXLED1;
+        if(ret==2) writePinLow(B0);
         return 1;
     }
-    RXLED0;
+    writePinHigh(B0);
     for (int i = 0; i < ROWS_PER_HAND; ++i) {
         matrix[slaveOffset+i] = serial_slave_buffer[i];
     }
@@ -235,7 +236,7 @@ uint8_t matrix_master_scan(void) {
     if( serial_transaction() ) {
 #endif
         // turn on the indicator led when halves are disconnected
-        TXLED1;
+        writePinLow(D5);
 
         error_count++;
 
@@ -248,7 +249,7 @@ uint8_t matrix_master_scan(void) {
         }
     } else {
         // turn off the indicator led on no error
-        TXLED0;
+        writePinHigh(D5);
         error_count = 0;
     }
     matrix_scan_quantum();

keyboards/helix/rev1/matrix.c

@@ -29,8 +29,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
-#include "pro_micro.h"
 #include "config.h"
+#include "quantum.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -100,7 +100,8 @@ void matrix_init(void)
     unselect_rows();
     init_cols();
 
-    TX_RX_LED_INIT;
+    setPinOutput(B0);
+    setPinOutput(D5);
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -201,7 +202,7 @@ uint8_t matrix_scan(void)
     if( serial_transaction() ) {
 #endif
         // turn on the indicator led when halves are disconnected
-        TXLED1;
+        writePinLow(D5);
 
         error_count++;
 
@@ -214,7 +215,7 @@ uint8_t matrix_scan(void)
         }
     } else {
         // turn off the indicator led on no error
-        TXLED0;
+        writePinHigh(D5);
         error_count = 0;
     }
     matrix_scan_quantum();

keyboards/helix/rev2/matrix.c

@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
-#include "pro_micro.h"
+#include "quantum.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -100,9 +100,10 @@ void matrix_init(void)
     unselect_rows();
     init_cols();
 
-    TX_RX_LED_INIT;
+    setPinOutput(B0);
-    TXLED0;
+    setPinOutput(D5);
-    RXLED0;
+    writePinHigh(B0);
+    writePinHigh(D5);
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -185,10 +186,10 @@ int serial_transaction(int master_changed) {
     int ret=serial_update_buffers();
 #endif
     if (ret ) {
-        if(ret==2) RXLED1;
+        if(ret==2) writePinLow(B0);
         return 1;
     }
-    RXLED0;
+    writePinHigh(B0);
     memcpy(&matrix[slaveOffset],
         (void *)serial_slave_buffer, sizeof(serial_slave_buffer));
     return 0;
@@ -239,7 +240,7 @@ uint8_t matrix_master_scan(void) {
     if( serial_transaction(mchanged) ) {
 #endif
         // turn on the indicator led when halves are disconnected
-        TXLED1;
+        writePinLow(D5);
 
         error_count++;
 
@@ -252,7 +253,7 @@ uint8_t matrix_master_scan(void) {
         }
     } else {
         // turn off the indicator led on no error
-        TXLED0;
+        writePinHigh(D5);
         error_count = 0;
     }
     matrix_scan_quantum();

keyboards/lily58/rev1/matrix.c

@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
-#include "pro_micro.h"
+#include "quantum.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -101,9 +101,10 @@ void matrix_init(void)
     unselect_rows();
     init_cols();
 
-    TX_RX_LED_INIT;
+    setPinOutput(B0);
-    TXLED0;
+    setPinOutput(D5);
-    RXLED0;
+    writePinHigh(B0);
+    writePinHigh(D5);
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -188,10 +189,10 @@ int serial_transaction(int master_changed) {
     int ret=serial_update_buffers();
 #endif
     if (ret ) {
-        if(ret==2) RXLED1;
+        if(ret==2) writePinLow(B0);
         return 1;
     }
-    RXLED0;
+    writePinHigh(B0);
     memcpy(&matrix[slaveOffset],
         (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH);
     return 0;
@@ -240,7 +241,7 @@ uint8_t matrix_master_scan(void) {
     if( serial_transaction(mchanged) ) {
 #endif
         // turn on the indicator led when halves are disconnected
-        TXLED1;
+        writePinLow(D5);
 
         error_count++;
 
@@ -253,7 +254,7 @@ uint8_t matrix_master_scan(void) {
         }
     } else {
         // turn off the indicator led on no error
-        TXLED0;
+        writePinHigh(D5);
         error_count = 0;
     }
     matrix_scan_quantum();

keyboards/xd75/keymaps/neothefox/keymap.c

@@ -0,0 +1,127 @@
+/* Copyright 2017 Wunder
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Layer shorthand
+#define LOWER  MO(_LOWER)
+#define RAISE  MO(_RAISE)
+#define SYSTEM MO(_SYSTEM)
+#define MPASTE LSFT(KC_INSERT)
+
+enum xd75_layers {
+ _QWERTY,
+ _LOWER,
+ _RAISE,
+ _SYSTEM
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | -      | `      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | [      | \      | ]      | Y      | U      | I      | O      | P      | '      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | CAP LK | A      | S      | D      | F      | G      | INSERT | HOME   | PG UP  | H      | J      | K      | L      | ;      | ENTER  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | DEL    | END    | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | LCTRL  | GUI    | MENU   | ALT    | LOWER  | SPACE  | SPACE  | SPACE  | SPACE  | SPACE  | RAISE  | LEFT   | DOWN   | UP     | RIGHT  |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_QWERTY] = LAYOUT_ortho_5x15( /* QWERTY */
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS, KC_GRV,  KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC, KC_BSLS, KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_QUOT,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_INS,  KC_HOME, KC_PGUP, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_DEL,  KC_END,  KC_PGDN, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_MENU, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT
+  ),
+
+/* SYSTEM
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | RESET  | DEBUG  |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |RGB_TOG |RGB_VAI |RGB VAD |        |        | PASTE  | PR SCR | SCR LK | PAUSE  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |RGB_MOD |RGB_SAI |RGB_HUI |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |        |RGB_SAD |RGB_HUD |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_SYSTEM] = LAYOUT_ortho_5x15( /* FUNCTION */
+    RESET,   DEBUG,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, RGB_VAD, _______, _______, MPASTE,  KC_PSCR, KC_SLCK, KC_PAUSE,
+    _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_SAI, RGB_HUI, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, RGB_SAD, RGB_HUD, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+
+/* LOWER
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | ~      | !      | @      | #      | $      | %      |        |        |        | ^      | &      | *      | (      | )      | '      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | DELETE | F1     | F2     | F3     | F4     | F5     |        |        |        | F6     | _      | +      | {      | }      | |      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * |        | F7     | F8     | F9     | F10    | F11    |        |        |        | F12    | ISO ~  | ISO |  | Home   | End    |        |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        | Next   | Vol-   | Vol+   | Play   |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_LOWER] = LAYOUT_ortho_5x15( /* LOWER */
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME,KC_END, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+  ),
+
+/* RAISE
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | `      | 1      | 2      | 3      | 4      | 5      |        |        |        | 6      | 7      | 8      | 9      | 0      | '      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * |        | F1     | F2     | F3     | F4     | F5     |        |        |        | F6     | -      | =      | [      | ]      | \      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * |        | F7     | F8     | F9     | F10    | F11    |        |        |        | F12    | ISO #  | ISO /  | Pg Up  | Pg Dn  |        |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * |        |        |        |        |        |        |        |        |        |        |        | Next   | Vol-   | Vol+   | Play   |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_RAISE] = LAYOUT_ortho_5x15( /* QWERTY */
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, _______, _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, _______, _______, KC_F6,   KC_MINUS,KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, _______, KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+  )
+};
+
+// SYSTEM layer toggle
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _SYSTEM);
+}
+

keyboards/xd75/keymaps/neothefox/readme.md

@@ -0,0 +1 @@
+# A OLKB-like layout for XD75

keyboards/yosino58/rev1/matrix.c

@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
-#include "pro_micro.h"
+#include "quantum.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -102,9 +102,10 @@ void matrix_init(void)
     unselect_rows();
     init_cols();
 
-    TX_RX_LED_INIT;
+    setPinOutput(B0);
-    TXLED0;
+    setPinOutput(D5);
-    RXLED0;
+    writePinHigh(D5);
+    writePinHigh(B0);
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -189,10 +190,10 @@ int serial_transaction(int master_changed) {
     int ret=serial_update_buffers();
 #endif
     if (ret ) {
-        if(ret==2) RXLED1;
+        if(ret==2) writePinLow(B0);
         return 1;
     }
-    RXLED0;
+    writePinHigh(B0);
     memcpy(&matrix[slaveOffset],
         (void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH);
     return 0;
@@ -241,7 +242,7 @@ uint8_t matrix_master_scan(void) {
     if( serial_transaction(mchanged) ) {
 #endif
         // turn on the indicator led when halves are disconnected
-        TXLED1;
+        writePinLow(D5);
 
         error_count++;
 
@@ -254,7 +255,7 @@ uint8_t matrix_master_scan(void) {
         }
     } else {
         // turn off the indicator led on no error
-        TXLED0;
+        writePinHigh(D5);
         error_count = 0;
     }
     matrix_scan_quantum();

keyboards/zinc/rev1/matrix.c

@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
-#include "pro_micro.h"
+#include "quantum.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -102,9 +102,10 @@ void matrix_init(void)
     unselect_rows();
     init_cols();
 
-    TX_RX_LED_INIT;
+    setPinOutput(B0);
-    TXLED0;
+    setPinOutput(D5);
-    RXLED0;
+    writePinHigh(D5);
+    writePinHigh(B0);
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -189,10 +190,10 @@ int serial_transaction(int master_changed) {
     int ret=serial_update_buffers();
 #endif
     if (ret ) {
-        if(ret==2) RXLED1;
+        if(ret==2) writePinLow(B0);
         return 1;
     }
-    RXLED0;
+    writePinHigh(B0);
     memcpy(&matrix[slaveOffset],
         (void *)serial_slave_buffer, sizeof(serial_slave_buffer));
     return 0;
@@ -240,7 +241,7 @@ uint8_t matrix_master_scan(void) {
     if( serial_transaction(mchanged) ) {
 #endif
         // turn on the indicator led when halves are disconnected
-        TXLED1;
+        writePinLow(D5);
 
         error_count++;
 
@@ -253,7 +254,7 @@ uint8_t matrix_master_scan(void) {
         }
     } else {
         // turn off the indicator led on no error
-        TXLED0;
+        writePinHigh(D5);
         error_count = 0;
     }
     matrix_scan_quantum();

keyboards/zinc/reva/matrix.c

@@ -30,7 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "split_util.h"
-#include "pro_micro.h"
+#include "quantum.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -102,9 +102,10 @@ void matrix_init(void)
     unselect_rows();
     init_cols();
 
-    TX_RX_LED_INIT;
+    setPinOutput(B0);
-    TXLED0;
+    setPinOutput(D5);
-    RXLED0;
+    writePinHigh(B0);
+    writePinHigh(D5);
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
@@ -189,10 +190,10 @@ int serial_transaction(int master_changed) {
     int ret=serial_update_buffers();
 #endif
     if (ret ) {
-        if(ret==2) RXLED1;
+        if(ret==2) writePinLow(B0);
         return 1;
     }
-    RXLED0;
+    writePinHigh(B0);
     memcpy(&matrix[slaveOffset],
         (void *)serial_slave_buffer, sizeof(serial_slave_buffer));
     return 0;
@@ -240,7 +241,7 @@ uint8_t matrix_master_scan(void) {
     if( serial_transaction(mchanged) ) {
 #endif
         // turn on the indicator led when halves are disconnected
-        TXLED1;
+        writePinLow(D5);
 
         error_count++;
 
@@ -253,7 +254,7 @@ uint8_t matrix_master_scan(void) {
         }
     } else {
         // turn off the indicator led on no error
-        TXLED0;
+        writePinHigh(D5);
         error_count = 0;
     }
     matrix_scan_quantum();

layouts/community/ortho_4x12/jotix/keymap.c

@@ -24,17 +24,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤
     KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_ENT,
 // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤
-    KC_LCTL,KC_LGUI,KC_LALT,KC_RALT,LOWER,  KC_SPC, KC_SPC, RAISE,  KC_LEFT,KC_DOWN,KC_UP,  KC_RGHT
+    KC_LCTL,KC_LGUI,KC_LALT,KC_DEL, LOWER,  KC_SPC, KC_SPC, RAISE,  KC_LEFT,KC_DOWN,KC_UP,  KC_RGHT
 // └───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┘
 ), 
 
 [_LOWER] = LAYOUT_ortho_4x12 (
 // ┌───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┐
-    KC_GRV, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   _______,
+    _______,KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   _______,
 // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤
-    _______,KC_MINS,KC_EQL, KC_LBRC,KC_RBRC,KC_BSLS,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,_______,_______,
+    _______,KC_MINS,KC_EQL, KC_LBRC,KC_RBRC,KC_BSLS,KC_GRV, _______,_______,_______,_______,_______,
 // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤
-    _______,KC_UNDS,KC_PLUS,KC_LCBR,KC_RCBR,KC_PIPE,KC_BTN1,KC_BTN2,_______,_______,_______,_______,
+    _______,KC_UNDS,KC_PLUS,KC_LCBR,KC_RCBR,KC_PIPE,KC_TILD,_______,_______,_______,_______,_______,
 // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤
     _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______
 // └───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┘
@@ -42,13 +42,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 [_RAISE] = LAYOUT_ortho_4x12 (
 // ┌───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┬───────┐
-    KC_TILD,KC_EXLM,KC_AT,  KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL,
+    _______,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, _______,
 // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤
-    KC_CAPS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_MINS,KC_EQL, KC_LBRC,KC_RBRC,KC_BSLS,
+    _______,KC_F11, KC_F12, _______,_______,_______,KC_HOME,KC_PGUP,_______,_______,_______,_______,
 // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤
-    _______,KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_UNDS,KC_PLUS,KC_LCBR,KC_RCBR,KC_PIPE,
+    _______,_______,_______,KC_CAPS,_______,KC_PGDN,KC_END, KC_PGDN,_______,KC_BTN1,KC_BTN2,_______,
 // ├───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┼───────┤
-    _______,_______,_______,_______,TGLOWER,_______,_______,_______,KC_HOME,KC_PGDN,KC_PGUP, KC_END
+    _______,_______,_______,_______,TGLOWER,_______,_______,_______,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R
 // └───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┴───────┘
 ),
 

quantum/dynamic_keymap.c

@@ -32,7 +32,7 @@
 
 // This is the default EEPROM max address to use for dynamic keymaps.
 // The default is the ATmega32u4 EEPROM max address.
-// Explicitly override it if the keyboard uses a microcontroller with 
+// Explicitly override it if the keyboard uses a microcontroller with
 // more EEPROM *and* it makes sense to increase it.
 #ifndef DYNAMIC_KEYMAP_EEPROM_MAX_ADDR
 #    define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 1023
@@ -210,9 +210,9 @@ void dynamic_keymap_macro_send(uint8_t id) {
         ++p;
     }
 
-    // Send the macro string one or two chars at a time
+    // Send the macro string one or three chars at a time
-    // by making temporary 1 or 2 char strings
+    // by making temporary 1 or 3 char strings
-    char data[3] = {0, 0, 0};
+    char data[4] = {0, 0, 0, 0};
     // We already checked there was a null at the end of
     // the buffer, so this cannot go past the end
     while (1) {
@@ -223,10 +223,12 @@ void dynamic_keymap_macro_send(uint8_t id) {
             break;
         }
         // If the char is magic (tap, down, up),
-        // add the next char (key to use) and send a 2 char string.
+        // add the next char (key to use) and send a 3 char string.
         if (data[0] == SS_TAP_CODE || data[0] == SS_DOWN_CODE || data[0] == SS_UP_CODE) {
-            data[1] = eeprom_read_byte(p++);
+            data[1] = data[0];
-            if (data[1] == 0) {
+            data[0] = SS_QMK_PREFIX;
+            data[2] = eeprom_read_byte(p++);
+            if (data[2] == 0) {
                 break;
             }
         }

util/msys2_install.sh

@@ -81,7 +81,7 @@ else
 fi
 popd
 
-pip3 install -r ${util_dir}/../requirements.txt
+pip3 install -r "${util_dir}/../requirements.txt"
 
 cp -f "$dir/activate_msys2.sh" "$download_dir/"