format code according to conventions [skip ci]

* Decouples mouse cursor and mouse wheel movements in accelerated mode.

* Fixed comment indentation.

* Updated docs

Co-authored-by: Francis LAN <[email protected]>

common_features.mk

@@ -141,6 +141,10 @@ else
         SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
         OPT_DEFS += -DEEPROM_EMU_STM32F072xB
         OPT_DEFS += -DSTM32_EEPROM_ENABLE
+      else ifneq ($(filter $(MCU_SERIES),STM32L0xx STM32L1xx),)
+        OPT_DEFS += -DEEPROM_DRIVER
+        COMMON_VPATH += $(DRIVER_PATH)/eeprom
+        SRC += eeprom_driver.c eeprom_stm32_L0_L1.c
       else
         # This will effectively work the same as "transient" if not supported by the chip
         SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c

docs/adc_driver.md

@@ -2,7 +2,7 @@
 
 QMK can leverage the Analog-to-Digital Converter (ADC) on supported MCUs to measure voltages on certain pins. This can be useful for implementing things such as battery level indicators for Bluetooth keyboards, or volume controls using a potentiometer, as opposed to a [rotary encoder](feature_encoders.md).
 
-This driver is currently AVR-only. The values returned are 10-bit integers (0-1023) mapped between 0V and VCC (usually 5V or 3.3V).
+This driver currently supports both AVR and a limited selection of ARM devices. On AVR devices, the values returned are 10-bit integers (0-1023) mapped between 0V and VCC (usually 5V or 3.3V). On supported ARM devices, there is more flexibility in control of operation through `#define`s, but by default the values returned are 12-bit integers (0-4095) mapped between 0V and VCC (usually 3.3V).
 
 ## Usage
 
@@ -20,6 +20,8 @@ Then place this include at the top of your code:
 
 ## Channels
 
+### AVR
+
 |Channel|AT90USB64/128|ATmega16/32U4|ATmega32A|ATmega328P|
 |-------|-------------|-------------|---------|----------|
 |0      |`F0`         |`F0`         |`A0`     |`C0`      |
@@ -39,8 +41,84 @@ Then place this include at the top of your code:
 
 <sup>\* The ATmega328P possesses two extra ADC channels; however, they are not present on the DIP pinout, and are not shared with GPIO pins. You can use `adc_read()` directly to gain access to these.</sup>
 
+### ARM
+
+Note that some of these pins are doubled-up on ADCs with the same channel. This is because the pins can be used for either ADC.
+
+Also note that the F0 and F3 use different numbering schemes. The F0 has a single ADC and the channels are 0-based, whereas the F3 has 4 ADCs and the channels are 1 based. This is because the F0 uses the `ADCv1` implementation of the ADC, whereas the F3 uses the `ADCv3` implementation.
+
+|ADC|Channel|STM32F0XX|STM32F3XX|
+|---|-------|---------|---------|
+|1  |0      |`A0`     |         |
+|1  |1      |`A1`     |`A0`     |
+|1  |2      |`A2`     |`A1`     |
+|1  |3      |`A3`     |`A2`     |
+|1  |4      |`A4`     |`A3`     |
+|1  |5      |`A5`     |`F4`     |
+|1  |6      |`A6`     |`C0`     |
+|1  |7      |`A7`     |`C1`     |
+|1  |8      |`B0`     |`C2`     |
+|1  |9      |`B1`     |`C3`     |
+|1  |10     |`C0`     |`F2`     |
+|1  |11     |`C1`     |         |
+|1  |12     |`C2`     |         |
+|1  |13     |`C3`     |         |
+|1  |14     |`C4`     |         |
+|1  |15     |`C5`     |         |
+|1  |16     |         |         |
+|2  |1      |         |`A4`     |
+|2  |2      |         |`A5`     |
+|2  |3      |         |`A6`     |
+|2  |4      |         |`A7`     |
+|2  |5      |         |`C4`     |
+|2  |6      |         |`C0`     |
+|2  |7      |         |`C1`     |
+|2  |8      |         |`C2`     |
+|2  |9      |         |`C3`     |
+|2  |10     |         |`F2`     |
+|2  |11     |         |`C5`     |
+|2  |12     |         |`B2`     |
+|2  |13     |         |         |
+|2  |14     |         |         |
+|2  |15     |         |         |
+|2  |16     |         |         |
+|3  |1      |         |`B1`     |
+|3  |2      |         |`E9`     |
+|3  |3      |         |`E13`    |
+|3  |4      |         |         |
+|3  |5      |         |         |
+|3  |6      |         |`E8`     |
+|3  |7      |         |`D10`    |
+|3  |8      |         |`D11`    |
+|3  |9      |         |`D12`    |
+|3  |10     |         |`D13`    |
+|3  |11     |         |`D14`    |
+|3  |12     |         |`B0`     |
+|3  |13     |         |`E7`     |
+|3  |14     |         |`E10`    |
+|3  |15     |         |`E11`    |
+|3  |16     |         |`E12`    |
+|4  |1      |         |`E14`    |
+|4  |2      |         |`B12`    |
+|4  |3      |         |`B13`    |
+|4  |4      |         |`B14`    |
+|4  |5      |         |`B15`    |
+|4  |6      |         |`E8`     |
+|4  |7      |         |`D10`    |
+|4  |8      |         |`D11`    |
+|4  |9      |         |`D12`    |
+|4  |10     |         |`D13`    |
+|4  |11     |         |`D14`    |
+|4  |12     |         |`D8`     |
+|4  |13     |         |`D9`     |
+|4  |14     |         |         |
+|4  |15     |         |         |
+|4  |16     |         |         |
+
 ## Functions
 
+### AVR
+
 |Function                    |Description                                                                                                        |
 |----------------------------|-------------------------------------------------------------------------------------------------------------------|
 |`analogReference(mode)`     |Sets the analog voltage reference source. Must be one of `ADC_REF_EXTERNAL`, `ADC_REF_POWER` or `ADC_REF_INTERNAL`.|
@@ -48,3 +126,28 @@ Then place this include at the top of your code:
 |`analogReadPin(pin)`        |Reads the value from the specified QMK pin, eg. `F6` for ADC6 on the ATmega32U4.                                   |
 |`pinToMux(pin)`             |Translates a given QMK pin to a mux value. If an unsupported pin is given, returns the mux value for "0V (GND)".   |
 |`adc_read(mux)`             |Reads the value from the ADC according to the specified mux. See your MCU's datasheet for more information.        |
+
+### ARM
+
+Note that care was taken to match all of the functions used for AVR devices, however complications in the ARM platform prevent that from always being possible. For example, the `STM32` chips do not have assigned Arduino pins. We could use the default pin numbers, but those numbers change based on the package type of the device. For this reason, please specify your target pins with their identifiers (`A0`, `F3`, etc.). Also note that there are some variants of functions that accept the target ADC for the pin. Some pins can be used for multiple ADCs, and this specified can help you pick which ADC will be used to interact with that pin.
+
+|Function                    |Description                                                                                                         |
+|----------------------------|--------------------------------------------------------------------------------------------------------------------|
+|`analogReadPin(pin)`        |Reads the value from the specified QMK pin, eg. `A0` for channel 0 on the STM32F0 and ADC1 channel 1 on the STM32F3. Note that if a pin can be used for multiple ADCs, it will pick the lower numbered ADC for this function. eg. `C0` will be channel 6 of ADC 1 when it could be used for ADC 2 as well.|
+|`analogReadPinAdc(pin, adc)`|Reads the value from the specified QMK pin and ADC, eg. `C0, 1` will read from channel 6, ADC 2 instead of ADC 1. Note that the ADCs are 0-indexed for this function.|
+|`pinToMux(pin)`             |Translates a given QMK pin to a channel and ADC combination. If an unsupported pin is given, returns the mux value for "0V (GND)".|
+|`adc_read(mux)`             |Reads the value from the ADC according to the specified pin and adc combination. See your MCU's datasheet for more information.|
+
+## Configuration
+
+## ARM
+
+The ARM implementation of the ADC has a few additional options that you can override in your own keyboards and keymaps to change how it operates.
+
+|`#define`          |Type  |Default              |Description|
+|-------------------|------|---------------------|-----------|
+|ADC_CIRCULAR_BUFFER|`bool`|`false`              |If `TRUE`, then the implementation will use a circular buffer.|
+|ADC_NUM_CHANNELS   |`int` |`1`                  |Sets the number of channels that will be scanned as part of an ADC operation. The current implementation only supports `1`.|
+|ADC_BUFFER_DEPTH   |`int` |`2`                  |Sets the depth of each result. Since we are only getting a 12-bit result by default, we set this to `2` bytes so we can contain our one value. This could be set to 1 if you opt for a 8-bit or lower result.|
+|ADC_SAMPLING_RATE  |`int` |`ADC_SMPR_SMP_1P5`   |Sets the sampling rate of the ADC. By default, it is set to the fastest setting. Please consult the corresponding `hal_adc_lld.h` in ChibiOS for your specific microcontroller for further documentation on your available options.|
+|ADC_RESOLUTION     |`int` |`ADC_CFGR1_RES_12BIT`|The resolution of your result. We choose 12 bit by default, but you can opt for 12, 10, 8, or 6 bit. Please consult the corresponding `hal_adc_lld.h` in ChibiOS for your specific microcontroller for further documentation on your available options.|

docs/eeprom_driver.md

@@ -2,14 +2,16 @@
 
 The EEPROM driver can be swapped out depending on the needs of the keyboard, or whether extra hardware is present.
 
-Driver                      | Description
+Driver                             | Description
---------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+-----------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-`EEPROM_DRIVER = vendor`    | Uses the on-chip driver provided by the chip manufacturer. For AVR, this is provided by avr-libc. This is supported on ARM for a subset of chips -- STM32F3xx, STM32F1xx, and STM32F072xB will be emulated by writing to flash. Other chips will generally act as "transient" below.
+`EEPROM_DRIVER = vendor` (default) | Uses the on-chip driver provided by the chip manufacturer. For AVR, this is provided by avr-libc. This is supported on ARM for a subset of chips -- STM32F3xx, STM32F1xx, and STM32F072xB will be emulated by writing to flash. STM32L0xx and STM32L1xx will use the onboard dedicated true EEPROM. Other chips will generally act as "transient" below.
-`EEPROM_DRIVER = i2c`       | Supports writing to I2C-based 24xx EEPROM chips. See the driver section below.
+`EEPROM_DRIVER = i2c`              | Supports writing to I2C-based 24xx EEPROM chips. See the driver section below.
-`EEPROM_DRIVER = transient` | Fake EEPROM driver -- supports reading/writing to RAM, and will be discarded when power is lost.
+`EEPROM_DRIVER = transient`        | Fake EEPROM driver -- supports reading/writing to RAM, and will be discarded when power is lost.
 
 ## Vendor Driver Configuration
 
+!> Resetting EEPROM using an STM32L0/L1 device takes up to 1 second for every 1kB of internal EEPROM used.
+
 No configurable options are available.
 
 ## I2C Driver Configuration

docs/feature_mouse_keys.md

@@ -58,6 +58,8 @@ This is the default mode. You can adjust the cursor and scrolling acceleration u
 |`MOUSEKEY_INTERVAL`         |50     |Time between cursor movements                            |
 |`MOUSEKEY_MAX_SPEED`        |10     |Maximum cursor speed at which acceleration stops         |
 |`MOUSEKEY_TIME_TO_MAX`      |20     |Time until maximum cursor speed is reached               |
+|`MOUSEKEY_WHEEL_DELAY`      |300    |Delay between pressing a wheel key and wheel movement    |
+|`MOUSEKEY_WHEEL_INTERVAL`   |100    |Time between wheel movements                             |
 |`MOUSEKEY_WHEEL_MAX_SPEED`  |8      |Maximum number of scroll steps per scroll action         |
 |`MOUSEKEY_WHEEL_TIME_TO_MAX`|40     |Time until maximum scroll speed is reached               |
 
@@ -66,6 +68,7 @@ Tips:
 * Setting `MOUSEKEY_DELAY` too low makes the cursor unresponsive. Setting it too high makes small movements difficult.
 * For smoother cursor movements, lower the value of `MOUSEKEY_INTERVAL`. If the refresh rate of your display is 60Hz, you could set it to `16` (1/60). As this raises the cursor speed significantly, you may want to lower `MOUSEKEY_MAX_SPEED`.
 * Setting `MOUSEKEY_TIME_TO_MAX` or `MOUSEKEY_WHEEL_TIME_TO_MAX` to `0` will disable acceleration for the cursor or scrolling respectively. This way you can make one of them constant while keeping the other accelerated, which is not possible in constant speed mode.
+* Setting `MOUSEKEY_WHEEL_INTERVAL` too low will make scrolling too fast. Setting it too high will make scrolling too slow when the wheel key is held down.
 
 Cursor acceleration uses the same algorithm as the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys).
 

docs/getting_started_github.md

@@ -0,0 +1,65 @@
+# How to Use Github with QMK
+
+Github can be a little tricky to those that aren't familiar with it - this guide will walk through each step of forking, cloning, and submitting a pull request with QMK.
+
+?> This guide assumes you're somewhat comfortable with running things at the command line, and have git installed on your system.
+
+Start on the [QMK Github page](https://github.com/qmk/qmk_firmware), and you'll see a button in the upper right that says "Fork":
+
+![Fork on Github](http://i.imgur.com/8Toomz4.jpg)
+
+If you're a part of an organization, you'll need to choose which account to fork it to. In most circumstances, you'll want to fork it to your personal account. Once your fork is completed (sometimes this takes a little while), click the "Clone or Download" button:
+
+![Download from Github](http://i.imgur.com/N1NYcSz.jpg)
+
+And be sure to select "HTTPS", and select the link and copy it:
+
+![HTTPS link](http://i.imgur.com/eGO0ohO.jpg)
+
+From here, enter `git clone --recurse-submodules ` into the command line, and then paste your link:
+
+```
+user@computer:~$ git clone --recurse-submodules https://github.com/whoeveryouare/qmk_firmware.git
+Cloning into 'qmk_firmware'...
+remote: Enumerating objects: 9, done.
+remote: Counting objects: 100% (9/9), done.
+remote: Compressing objects: 100% (5/5), done.
+remote: Total 183883 (delta 5), reused 4 (delta 4), pack-reused 183874
+Receiving objects: 100% (183883/183883), 132.90 MiB | 9.57 MiB/s, done.
+Resolving deltas: 100% (119972/119972), done.
+...
+Submodule path 'lib/chibios': checked out '587968d6cbc2b0e1c7147540872f2a67e59ca18b'
+Submodule path 'lib/chibios-contrib': checked out 'ede48346eee4b8d6847c19bc01420bee76a5e486'
+Submodule path 'lib/googletest': checked out 'ec44c6c1675c25b9827aacd08c02433cccde7780'
+Submodule path 'lib/lufa': checked out 'ce10f7642b0459e409839b23cc91498945119b4d'
+Submodule path 'lib/ugfx': checked out '3e97b74e03c93631cdd3ddb2ce43b963fdce19b2'
+```
+
+You now have your QMK fork on your local machine, and you can add your keymap, compile it and flash it to your board. Once you're happy with your changes, you can add, commit, and push them to your fork like this:
+
+```
+user@computer:~$ git add .
+user@computer:~$ git commit -m "adding my keymap"
+[master cccb1608] adding my keymap
+ 1 file changed, 1 insertion(+)
+ create mode 100644 keyboards/planck/keymaps/mine/keymap.c
+user@computer:~$ git push
+Counting objects: 1, done.
+Delta compression using up to 4 threads.
+Compressing objects: 100% (1/1), done.
+Writing objects: 100% (1/1), 1.64 KiB | 0 bytes/s, done.
+Total 1 (delta 1), reused 0 (delta 0)
+remote: Resolving deltas: 100% (1/1), completed with 1 local objects.
+To https://github.com/whoeveryouare/qmk_firmware.git
+ + 20043e64...7da94ac5 master -> master
+```
+
+Your changes now exist on your fork on Github - if you go back there (`https://github.com/<whoeveryouare>/qmk_firmware`), you can create a "New Pull Request" by clicking this button:
+
+![New Pull Request](http://i.imgur.com/DxMHpJ8.jpg)
+
+Here you'll be able to see exactly what you've committed - if it all looks good, you can finalize it by clicking "Create Pull Request":
+
+![Create Pull Request](http://i.imgur.com/Ojydlaj.jpg)
+
+After submitting, we may talk to you about your changes, ask that you make changes, and eventually accept it! Thanks for contributing to QMK :)

docs/index.html

@@ -16,7 +16,8 @@
   <link rel="stylesheet" href="//unpkg.com/docsify/lib/themes/buble.css" title="light">
   <link rel="stylesheet" href="//unpkg.com/docsify/lib/themes/dark.css" media="(prefers-color-scheme: dark)">
   <link rel="stylesheet" href="//unpkg.com/[email protected]/dist/toc.css">
-  <link rel="stylesheet" href="sidebar.css" />
+  <link rel="stylesheet" href="qmk_custom_light.css">
+  <link rel="stylesheet" href="qmk_custom_dark.css" media="(prefers-color-scheme: dark)">
 </head>
 <body>
   <div id="app"></div>

docs/qmk_custom_dark.css

@@ -0,0 +1,29 @@
+.sidebar li.active {
+    background-color: #555;
+}
+
+.markdown-section p.tip,
+.markdown-section tr:nth-child(2n) {
+ background-color:#444;
+}
+
+.markdown-section tr {
+    border-top: 1px solid #555;
+}
+
+.markdown-section td, .markdown-section th {
+    border: 1px solid #555;
+}
+
+.markdown-section p.tip code {
+    background-color: #555;
+    color: #fff;
+}
+
+.page_toc code {
+    background-color: #555;
+}
+
+.markdown-section hr, .search {
+    border-bottom: 1px solid #777 !important;
+}

drivers/arm/analog.c

@@ -0,0 +1,207 @@
+/* Copyright 2019 Drew Mills
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "analog.h"
+#include "quantum.h"
+
+/* User configurable ADC options */
+#ifndef ADC_CIRCULAR_BUFFER
+#    define ADC_CIRCULAR_BUFFER FALSE
+#endif
+
+#ifndef ADC_NUM_CHANNELS
+#    define ADC_NUM_CHANNELS 1
+#elif ADC_NUM_CHANNELS != 1
+#    error "The ARM ADC implementation currently only supports reading one channel at a time."
+#endif
+
+#ifndef ADC_BUFFER_DEPTH
+#    define ADC_BUFFER_DEPTH 2
+#endif
+
+// For more sampling rate options, look at hal_adc_lld.h in ChibiOS
+#ifndef ADC_SAMPLING_RATE
+#    define ADC_SAMPLING_RATE ADC_SMPR_SMP_1P5
+#endif
+
+// Options are 12, 10, 8, and 6 bit.
+#ifndef ADC_RESOLUTION
+#    define ADC_RESOLUTION ADC_CFGR1_RES_12BIT
+#endif
+
+static ADCConfig   adcCfg = {};
+static adcsample_t sampleBuffer[ADC_NUM_CHANNELS * ADC_BUFFER_DEPTH];
+
+// Initialize to max number of ADCs, set to empty object to initialize all to false.
+#if defined(STM32F0XX)
+static bool adcInitialized[1] = {};
+#elif defined(STM32F3XX)
+static bool adcInitialized[4] = {};
+#else
+#    error "adcInitialized has not been implemented for this ARM microcontroller."
+#endif
+
+static ADCConversionGroup adcConversionGroup = {
+    ADC_CIRCULAR_BUFFER,
+    (uint16_t)(ADC_NUM_CHANNELS),
+    NULL,  // No end callback
+    NULL,  // No error callback
+#if defined(STM32F0XX)
+    ADC_CFGR1_CONT | ADC_RESOLUTION,
+    ADC_TR(0, 0).ADC_SAMPLING_RATE,
+    NULL,  // Doesn't specify a default channel
+#elif defined(STM32F3XX)
+    ADC_CFGR_CONT | ADC_RESOLUTION,
+    ADC_TR(0, 4095),
+    {
+        ADC_SAMPLING_RATE,
+        ADC_SAMPLING_RATE,
+    },
+    {
+        0,  // Doesn't specify a default channel
+        0,
+        0,
+        0,
+    },
+#endif
+};
+
+static inline ADCDriver* intToADCDriver(uint8_t adcInt) {
+    ADCDriver* target;
+
+    switch (adcInt) {
+        // clang-format off
+#if STM32_ADC_USE_ADC1
+        case 0: target = &ADCD1; break;
+#endif
+#if STM32_ADC_USE_ADC2
+        case 1: target = &ADCD2; break;
+#endif
+#if STM32_ADC_USE_ADC3
+        case 2: target = &ADCD3; break;
+#endif
+#if STM32_ADC_USE_ADC4
+        case 3: target = &ADCD4; break;
+#endif
+        default: target = NULL; break;
+            // clang-format on
+    }
+
+    return target;
+}
+
+static inline void manageAdcInitializationDriver(uint8_t adc, ADCDriver* adcDriver) {
+    if (!adcInitialized[adc]) {
+        adcStart(adcDriver, &adcCfg);
+        adcInitialized[adc] = true;
+    }
+}
+
+static inline void manageAdcInitialization(uint8_t adc) { manageAdcInitializationDriver(adc, intToADCDriver(adc)); }
+
+pin_and_adc pinToMux(pin_t pin) {
+    switch (pin) {
+        // clang-format off
+#if defined(STM32F0XX)
+        case A0:  return (pin_and_adc){ ADC_CHANNEL_IN0,  0 };
+        case A1:  return (pin_and_adc){ ADC_CHANNEL_IN1,  0 };
+        case A2:  return (pin_and_adc){ ADC_CHANNEL_IN2,  0 };
+        case A3:  return (pin_and_adc){ ADC_CHANNEL_IN3,  0 };
+        case A4:  return (pin_and_adc){ ADC_CHANNEL_IN4,  0 };
+        case A5:  return (pin_and_adc){ ADC_CHANNEL_IN5,  0 };
+        case A6:  return (pin_and_adc){ ADC_CHANNEL_IN6,  0 };
+        case A7:  return (pin_and_adc){ ADC_CHANNEL_IN7,  0 };
+        case B0:  return (pin_and_adc){ ADC_CHANNEL_IN8,  0 };
+        case B1:  return (pin_and_adc){ ADC_CHANNEL_IN9,  0 };
+        case C0:  return (pin_and_adc){ ADC_CHANNEL_IN10, 0 };
+        case C1:  return (pin_and_adc){ ADC_CHANNEL_IN11, 0 };
+        case C2:  return (pin_and_adc){ ADC_CHANNEL_IN12, 0 };
+        case C3:  return (pin_and_adc){ ADC_CHANNEL_IN13, 0 };
+        case C4:  return (pin_and_adc){ ADC_CHANNEL_IN14, 0 };
+        case C5:  return (pin_and_adc){ ADC_CHANNEL_IN15, 0 };
+#elif defined(STM32F3XX)
+        case A0:  return (pin_and_adc){ ADC_CHANNEL_IN1,  0 };
+        case A1:  return (pin_and_adc){ ADC_CHANNEL_IN2,  0 };
+        case A2:  return (pin_and_adc){ ADC_CHANNEL_IN3,  0 };
+        case A3:  return (pin_and_adc){ ADC_CHANNEL_IN4,  0 };
+        case A4:  return (pin_and_adc){ ADC_CHANNEL_IN1,  1 };
+        case A5:  return (pin_and_adc){ ADC_CHANNEL_IN2,  1 };
+        case A6:  return (pin_and_adc){ ADC_CHANNEL_IN3,  1 };
+        case A7:  return (pin_and_adc){ ADC_CHANNEL_IN4,  1 };
+        case B0:  return (pin_and_adc){ ADC_CHANNEL_IN12, 2 };
+        case B1:  return (pin_and_adc){ ADC_CHANNEL_IN1,  2 };
+        case B2:  return (pin_and_adc){ ADC_CHANNEL_IN12, 1 };
+        case B12: return (pin_and_adc){ ADC_CHANNEL_IN2,  3 };
+        case B13: return (pin_and_adc){ ADC_CHANNEL_IN3,  3 };
+        case B14: return (pin_and_adc){ ADC_CHANNEL_IN4,  3 };
+        case B15: return (pin_and_adc){ ADC_CHANNEL_IN5,  3 };
+        case C0:  return (pin_and_adc){ ADC_CHANNEL_IN6,  0 }; // Can also be ADC2
+        case C1:  return (pin_and_adc){ ADC_CHANNEL_IN7,  0 }; // Can also be ADC2
+        case C2:  return (pin_and_adc){ ADC_CHANNEL_IN8,  0 }; // Can also be ADC2
+        case C3:  return (pin_and_adc){ ADC_CHANNEL_IN9,  0 }; // Can also be ADC2
+        case C4:  return (pin_and_adc){ ADC_CHANNEL_IN5,  1 };
+        case C5:  return (pin_and_adc){ ADC_CHANNEL_IN11, 1 };
+        case D8:  return (pin_and_adc){ ADC_CHANNEL_IN12, 3 };
+        case D9:  return (pin_and_adc){ ADC_CHANNEL_IN13, 3 };
+        case D10: return (pin_and_adc){ ADC_CHANNEL_IN7,  2 }; // Can also be ADC4
+        case D11: return (pin_and_adc){ ADC_CHANNEL_IN8,  2 }; // Can also be ADC4
+        case D12: return (pin_and_adc){ ADC_CHANNEL_IN9,  2 }; // Can also be ADC4
+        case D13: return (pin_and_adc){ ADC_CHANNEL_IN10, 2 }; // Can also be ADC4
+        case D14: return (pin_and_adc){ ADC_CHANNEL_IN11, 2 }; // Can also be ADC4
+        case E7:  return (pin_and_adc){ ADC_CHANNEL_IN13, 2 };
+        case E8:  return (pin_and_adc){ ADC_CHANNEL_IN6,  2 }; // Can also be ADC4
+        case E9:  return (pin_and_adc){ ADC_CHANNEL_IN2,  2 };
+        case E10: return (pin_and_adc){ ADC_CHANNEL_IN14, 2 };
+        case E11: return (pin_and_adc){ ADC_CHANNEL_IN15, 2 };
+        case E12: return (pin_and_adc){ ADC_CHANNEL_IN16, 2 };
+        case E13: return (pin_and_adc){ ADC_CHANNEL_IN3,  2 };
+        case E14: return (pin_and_adc){ ADC_CHANNEL_IN1,  3 };
+        case E15: return (pin_and_adc){ ADC_CHANNEL_IN2,  3 };
+        case F2:  return (pin_and_adc){ ADC_CHANNEL_IN10, 0 }; // Can also be ADC2
+        case F4:  return (pin_and_adc){ ADC_CHANNEL_IN5,  0 };
+#else
+#error "An ADC pin-to-mux configuration has not been specified for this microcontroller."
+#endif
+        default:  return (pin_and_adc){ 0, 0 };
+            // clang-format on
+    }
+}
+
+adcsample_t analogReadPin(pin_t pin) { return adc_read(pinToMux(pin)); }
+
+adcsample_t analogReadPinAdc(pin_t pin, uint8_t adc) {
+    pin_and_adc target = pinToMux(pin);
+    target.adc         = adc;
+    return adc_read(target);
+}
+
+adcsample_t adc_read(pin_and_adc mux) {
+#if defined(STM32F0XX)
+    adcConversionGroup.sqr = ADC_CHSELR_CHSEL1;
+#elif defined(STM32F3XX)
+    adcConversionGroup.sqr[0] = ADC_SQR1_SQ1_N(mux.pin);
+#else
+#    error "adc_read has not been updated to support this ARM microcontroller."
+#endif
+
+    ADCDriver* targetDriver = intToADCDriver(mux.adc);
+    manageAdcInitializationDriver(mux.adc, targetDriver);
+
+    adcConvert(targetDriver, &adcConversionGroup, &sampleBuffer[0], ADC_BUFFER_DEPTH);
+    adcsample_t* result = sampleBuffer;
+
+    return *result;
+}

drivers/arm/analog.h

@@ -0,0 +1,57 @@
+/* Copyright 2019 Drew Mills
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+#include "ch.h"
+#include <hal.h>
+
+#if !defined(STM32F0XX) && !defined(STM32F3XX)
+#    error "Only STM23F0 and STM32F3 devices have ADC support in QMK at this time."
+#endif
+
+#if !HAL_USE_ADC
+#    error "You need to set HAL_USE_ADC to TRUE in your halconf.h to use the ADC."
+#endif
+
+#if !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC2 && !STM32_ADC_USE_ADC3 && !STM32_ADC_USE_ADC4
+#    error "You need to set one of the 'STM32_ADC_USE_ADCx' settings to TRUE in your mcuconf.h to use the ADC."
+#endif
+
+#if STM32_ADC_DUAL_MODE
+#    error "STM32 ADC Dual Mode is not supported at this time."
+#endif
+
+#if STM32_ADCV3_OVERSAMPLING
+#    error "STM32 ADCV3 Oversampling is not supported at this time."
+#endif
+
+typedef struct {
+    pin_t   pin;
+    uint8_t adc;
+} pin_and_adc;
+#define PIN_AND_ADC(p, a) \
+    (pin_and_adc) { p, a }
+
+// analogReference has been left un-defined for ARM devices.
+// void analogReference(uint8_t mode);
+
+adcsample_t analogReadPin(pin_t pin);
+adcsample_t analogReadPinAdc(pin_t pin, uint8_t adc);
+pin_and_adc pinToMux(pin_t pin);
+
+adcsample_t adc_read(pin_and_adc mux);

drivers/eeprom/eeprom_stm32_L0_L1.c

@@ -0,0 +1,96 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include <string.h>
+
+#include "hal.h"
+#include "eeprom_driver.h"
+#include "eeprom_stm32_L0_L1.h"
+
+#define EEPROM_BASE_ADDR 0x08080000
+#define EEPROM_ADDR(offset) (EEPROM_BASE_ADDR + (offset))
+#define EEPROM_PTR(offset) ((__IO uint8_t *)EEPROM_ADDR(offset))
+#define EEPROM_BYTE(location, offset) (*(EEPROM_PTR(((uint32_t)location) + ((uint32_t)offset))))
+
+#define BUFFER_BYTE(buffer, offset) (*(((uint8_t *)buffer) + offset))
+
+#define FLASH_PEKEY1 0x89ABCDEF
+#define FLASH_PEKEY2 0x02030405
+
+static inline void STM32_L0_L1_EEPROM_WaitNotBusy(void) {
+    while (FLASH->SR & FLASH_SR_BSY) {
+        __WFI();
+    }
+}
+
+static inline void STM32_L0_L1_EEPROM_Unlock(void) {
+    STM32_L0_L1_EEPROM_WaitNotBusy();
+    if (FLASH->PECR & FLASH_PECR_PELOCK) {
+        FLASH->PEKEYR = FLASH_PEKEY1;
+        FLASH->PEKEYR = FLASH_PEKEY2;
+    }
+}
+
+static inline void STM32_L0_L1_EEPROM_Lock(void) {
+    STM32_L0_L1_EEPROM_WaitNotBusy();
+    FLASH->PECR |= FLASH_PECR_PELOCK;
+}
+
+void eeprom_driver_init(void) {}
+
+void eeprom_driver_erase(void) {
+    STM32_L0_L1_EEPROM_Unlock();
+
+    for (size_t offset = 0; offset < STM32_ONBOARD_EEPROM_SIZE; offset += sizeof(uint32_t)) {
+        FLASH->PECR |= FLASH_PECR_ERASE | FLASH_PECR_DATA;
+
+        *(__IO uint32_t *)EEPROM_ADDR(offset) = (uint32_t)0;
+
+        STM32_L0_L1_EEPROM_WaitNotBusy();
+        FLASH->PECR &= ~(FLASH_PECR_ERASE | FLASH_PECR_DATA);
+    }
+
+    STM32_L0_L1_EEPROM_Lock();
+}
+
+void eeprom_read_block(void *buf, const void *addr, size_t len) {
+    for (size_t offset = 0; offset < len; ++offset) {
+        // Drop out if we've hit the limit of the EEPROM
+        if ((((uint32_t)addr) + offset) >= STM32_ONBOARD_EEPROM_SIZE) {
+            break;
+        }
+
+        STM32_L0_L1_EEPROM_WaitNotBusy();
+        BUFFER_BYTE(buf, offset) = EEPROM_BYTE(addr, offset);
+    }
+}
+
+void eeprom_write_block(const void *buf, void *addr, size_t len) {
+    STM32_L0_L1_EEPROM_Unlock();
+
+    for (size_t offset = 0; offset < len; ++offset) {
+        // Drop out if we've hit the limit of the EEPROM
+        if ((((uint32_t)addr) + offset) >= STM32_ONBOARD_EEPROM_SIZE) {
+            break;
+        }
+
+        STM32_L0_L1_EEPROM_WaitNotBusy();
+        EEPROM_BYTE(addr, offset) = BUFFER_BYTE(buf, offset);
+    }
+
+    STM32_L0_L1_EEPROM_Lock();
+}

drivers/eeprom/eeprom_stm32_L0_L1.h

@@ -0,0 +1,33 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/*
+    The size used by the STM32 L0/L1 EEPROM driver.
+*/
+#ifndef STM32_ONBOARD_EEPROM_SIZE
+#    ifdef VIA_ENABLE
+#        define STM32_ONBOARD_EEPROM_SIZE 1024
+#    else
+#        include "eeconfig.h"
+#        define STM32_ONBOARD_EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4)  // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO and EEPROM page sizing
+#    endif
+#endif
+
+#if STM32_ONBOARD_EEPROM_SIZE > 128
+#    pragma message("Please note: resetting EEPROM using an STM32L0/L1 device takes up to 1 second for every 1kB of internal EEPROM used.")
+#endif

keyboards/abacus/abacus.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 nickolaij
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "abacus.h"

keyboards/abacus/abacus.h

@@ -0,0 +1,41 @@
+/* Copyright 2020 nickolaij
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "quantum.h"
+#define XXX KC_NO
+
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a,    k0b, \
+    k10,  k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,   k1b, \
+    k20,    k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+    k30,  k31, k32, k33,         k34,          k35, k36, k37, k38  \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+    { k30, k31, k32, k33, XXX, XXX, k34, XXX, k35, k36, k37, k38}   \
+}

keyboards/abacus/config.h

@@ -0,0 +1,133 @@
+/*
+Copyright 2020 nickolaij
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER nickolaij
+#define PRODUCT abacus
+#define DESCRIPTION A first attempt at a custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D3, D2, D4, C6 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, D7, B3, E6, B2, B4, B6, B5}
+#define UNUSED_PINS {B0}
+
+#define DIP_SWITCH_PINS { D0 }
+
+#define ENCODERS_PAD_A { F1 }
+#define ENCODERS_PAD_B { F0 }
+#define ENCODER_RESOLUTION 4
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+#define RGB_DI_PIN D1
+
+#ifdef RGB_DI_PIN
+#    define RGBLED_NUM 17
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== choose animations ==*/
+#    define RGBLIGHT_EFFECT_BREATHING
+#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#    define RGBLIGHT_EFFECT_SNAKE
+#    define RGBLIGHT_EFFECT_KNIGHT
+#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+#endif
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1

keyboards/abacus/info.json

@@ -0,0 +1,62 @@
+{
+    "keyboard_name": "Abacus",
+    "url": "https://www.github.com/nickolaij",
+    "maintainer": "nickolaij",
+    "width": 12.75,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "key_count": 45,
+            "layout": [
+                {"label":"k00", "x":0, "y":0, "w":1},
+                {"label":"k01", "x":1, "y":0, "w":1},
+                {"label":"k02", "x":2, "y":0, "w":1},
+                {"label":"k03", "x":3, "y":0, "w":1},
+                {"label":"k04", "x":4, "y":0, "w":1},
+                {"label":"k05", "x":5, "y":0, "w":1},
+                {"label":"k06", "x":6, "y":0, "w":1},
+                {"label":"k07", "x":7, "y":0, "w":1},
+                {"label":"k08", "x":8, "y":0, "w":1},
+                {"label":"k09", "x":9, "y":0, "w":1},
+                {"label":"k0a", "x":10, "y":0, "w":1},
+                {"label":"k0b", "x":11, "y":0, "w":1.75},
+
+                {"label":"k10", "x":0, "y":1, "w":1.25},
+                {"label":"k11", "x":1.25, "y":1, "w":1},
+                {"label":"k12", "x":2.25, "y":1, "w":1},
+                {"label":"k13", "x":3.25, "y":1, "w":1},
+                {"label":"k14", "x":4.25, "y":1, "w":1},
+                {"label":"k15", "x":5.25, "y":1, "w":1},
+                {"label":"k16", "x":6.25, "y":1, "w":1},
+                {"label":"k17", "x":7.25, "y":1, "w":1},
+                {"label":"k18", "x":8.25, "y":1, "w":1},
+                {"label":"k19", "x":9.25, "y":1, "w":1},
+                {"label":"k1a", "x":10.25, "y":1, "w":1},
+                {"label":"k1b", "x":11.25, "y":1, "w":1.5},
+
+                {"label":"k20", "x":0, "y":2, "w":1.75},
+                {"label":"k21", "x":1.75, "y":2, "w":1},
+                {"label":"k22", "x":2.75, "y":2, "w":1},
+                {"label":"k23", "x":3.75, "y":2, "w":1},
+                {"label":"k24", "x":4.75, "y":2, "w":1},
+                {"label":"k25", "x":5.75, "y":2, "w":1},
+                {"label":"k26", "x":6.75, "y":2, "w":1},
+                {"label":"k27", "x":7.75, "y":2, "w":1},
+                {"label":"k28", "x":8.75, "y":2, "w":1},
+                {"label":"k29", "x":9.75, "y":2, "w":1},
+                {"label":"k2a", "x":10.75, "y":2, "w":1},
+                {"label":"k2b", "x":11.75, "y":2, "w":1},
+
+                {"label":"k30", "x":0, "y":3, "w":1.25},
+                {"label":"k31", "x":1.25, "y":3, "w":1},
+                {"label":"k32", "x":2.25, "y":3, "w":1},
+                {"label":"k33", "x":3.25, "y":3, "w":2.75},
+                {"label":"k34", "x":6, "y":3, "w":2.75},
+                {"label":"k35", "x":8.75, "y":3, "w":1},
+                {"label":"k36", "x":9.75, "y":3, "w":1},
+                {"label":"k37", "x":10.75, "y":3, "w":1},
+                {"label":"k38", "x":11.75, "y":3, "w":1}
+            ]
+        }
+    }
+}

keyboards/abacus/keymaps/default/keymap.c

@@ -0,0 +1,148 @@
+/* Copyright 2020 nickolaij
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// wait DELAY ms before unregistering media keys
+#define MEDIA_KEY_DELAY 10
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _UPPER,
+    _LOWER
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    NICKURL = SAFE_RANGE,
+    ALTTAB
+};
+
+enum unicode_names {
+    LOVEEYES,
+    THINK,
+    UPSIDEDOWN,
+    NOMOUTH,
+    PARTY,
+    HEART,
+    EGGPLANT,
+    PEACH,
+    EMOJI100,
+    EMOJIB
+};
+
+const uint32_t PROGMEM unicode_map[] = {
+    [LOVEEYES]  = 0x1f60d,
+    [THINK] = 0x1f914,
+    [UPSIDEDOWN] = 0x1f643,
+    [NOMOUTH] = 0x1f636,
+    [PARTY]  = 0x1f973,
+    [HEART] = 0x1f495,
+    [EMOJI100] = 0x1f4af,
+    [PEACH] = 0x1f351,
+    [EGGPLANT] = 0x1f346,
+    [EMOJIB] = 0x1f171
+};
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_ESCAPE, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPACE,
+        KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_BSLASH,
+        KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_UP, KC_DELETE,
+        KC_LCTRL, KC_LGUI, MO(_UPPER), KC_SPACE, KC_ENTER, MO(_LOWER), KC_LEFT, KC_DOWN, KC_RIGHT
+    ),
+    [_UPPER] = LAYOUT(
+        KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
+        ALTTAB, _______, _______, _______, _______, _______, _______, _______, KC_LBRACKET, KC_RBRACKET, KC_QUOTE, KC_SLASH,
+        _______, _______, _______, _______, _______, _______, _______, _______, KC_MINUS, KC_EQUAL, _______, _______,
+        KC_LALT, _______, _______, _______, _______, _______, KC_HOME, _______, KC_END
+    ),
+    [_LOWER] = LAYOUT(
+        NICKURL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______,
+        _______, KC_F11, KC_F12, RGB_MODE_PLAIN, RGB_MODE_BREATHE, RGB_MODE_RAINBOW, RGB_MODE_SWIRL, RGB_MODE_SNAKE, RGB_MODE_KNIGHT, RGB_MODE_GRADIENT, XXXXXXX, RGB_TOG, 
+        _______, X(LOVEEYES), X(THINK), X(UPSIDEDOWN), X(NOMOUTH), X(PARTY), X(PEACH), X(HEART), X(EGGPLANT), X(EMOJI100), X(EMOJIB), RGB_HUI,
+        KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______
+    )
+ 
+ 
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case NICKURL:
+            if (record->event.pressed) {
+                SEND_STRING("https://www.github.com/nickolaij");
+            } else {
+                tap_code(KC_ENTER);
+            }
+            return true;
+            break;
+        
+        case ALTTAB:
+            if (record->event.pressed) {
+                tap_code16(A(KC_TAB));
+            }
+            return true;
+            break;
+
+        default:
+            return true;
+
+    }
+}
+
+
+void dip_switch_update_user(uint8_t index, bool active) { 
+    switch (index) {
+        case 0:
+            if(active) {
+                switch(get_highest_layer(layer_state)) {
+                case _BASE:
+                    tap_code16(LCTL(KC_F));
+                    break;
+                case _UPPER:
+                    tap_code(KC_MUTE);
+                    break;
+                case _LOWER:
+                    tap_code(KC_MEDIA_PLAY_PAUSE);
+                    break;
+                }
+        }
+    }
+}
+
+
+void matrix_init_user(void) {
+    set_unicode_input_mode(UC_WINC);
+}
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+
+    switch(get_highest_layer(layer_state)) {
+        case _BASE:
+            clockwise ? tap_code(KC_PGDN) : tap_code(KC_PGUP);
+            break;
+        case _UPPER:
+            clockwise ? tap_code(KC_VOLU) : tap_code(KC_VOLD);
+            break;
+        case _LOWER:
+            clockwise ? tap_code(KC_MEDIA_NEXT_TRACK) : tap_code(KC_MEDIA_PREV_TRACK);
+            break;
+        }
+}

keyboards/abacus/keymaps/default/readme.md

@@ -0,0 +1,4 @@
+# The default keymap for Abacus
+
+This is made based on my first few days of playing with it and honing in on what feels right.
+I've repurposed the DIP switch function for the encoder switches and added some functionality for multiple layers also effecting the encoders output.

keyboards/abacus/readme.md

@@ -0,0 +1,15 @@
+# Abacus
+
+![abacus](https://i.imgur.com/IFtuWaK.jpg)
+
+A first attempt at a PCB design for a mechanical keyboard. Includes rotary encoder and RGB underglow.
+
+* Keyboard Maintainer: [nickolaij](https://github.com/nickolaij)
+* Hardware Supported: Abacus PCB, [Elite C Microcontroller](https://keeb.io/products/elite-c-usb-c-pro-micro-replacement-arduino-compatible-atmega32u4) or Pro Micro Microcontroller (Elite C has additional pins for encoder)
+* Hardware Availability: [Abacus PCB Github](https://github.com/nickolaij/Abacus_Rev2)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make abacus:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/abacus/rules.mk

@@ -0,0 +1,36 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+UNICODEMAP_ENABLE = yes
+ENCODER_ENABLE = yes
+DIP_SWITCH_ENABLE = yes
+LTO_ENABLE = yes

keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -1,268 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#include "hal.h"
-#include "stm32_gpio.h"
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local variables and types.                                         */
-/*===========================================================================*/
-
-/**
- * @brief   Type of STM32 GPIO port setup.
- */
-typedef struct {
-  uint32_t              moder;
-  uint32_t              otyper;
-  uint32_t              ospeedr;
-  uint32_t              pupdr;
-  uint32_t              odr;
-  uint32_t              afrl;
-  uint32_t              afrh;
-} gpio_setup_t;
-
-/**
- * @brief   Type of STM32 GPIO initialization data.
- */
-typedef struct {
-#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
-  gpio_setup_t          PAData;
-#endif
-#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
-  gpio_setup_t          PBData;
-#endif
-#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
-  gpio_setup_t          PCData;
-#endif
-#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
-  gpio_setup_t          PDData;
-#endif
-#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
-  gpio_setup_t          PEData;
-#endif
-#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
-  gpio_setup_t          PFData;
-#endif
-#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
-  gpio_setup_t          PGData;
-#endif
-#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
-  gpio_setup_t          PHData;
-#endif
-#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
-  gpio_setup_t          PIData;
-#endif
-#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
-  gpio_setup_t          PJData;
-#endif
-#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
-  gpio_setup_t          PKData;
-#endif
-} gpio_config_t;
-
-/**
- * @brief   STM32 GPIO static initialization data.
- */
-static const gpio_config_t gpio_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH},
-#endif
-#if STM32_HAS_GPIOJ
-  {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
-   VAL_GPIOJ_ODR,   VAL_GPIOJ_AFRL,   VAL_GPIOJ_AFRH},
-#endif
-#if STM32_HAS_GPIOK
-  {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
-   VAL_GPIOK_ODR,   VAL_GPIOK_AFRL,   VAL_GPIOK_AFRH}
-#endif
-};
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
-
-  gpiop->OTYPER  = config->otyper;
-  gpiop->OSPEEDR = config->ospeedr;
-  gpiop->PUPDR   = config->pupdr;
-  gpiop->ODR     = config->odr;
-  gpiop->AFRL    = config->afrl;
-  gpiop->AFRH    = config->afrh;
-  gpiop->MODER   = config->moder;
-}
-
-static void stm32_gpio_init(void) {
-
-  /* Enabling GPIO-related clocks, the mask comes from the
-     registry header file.*/
-  rccResetAHB(STM32_GPIO_EN_MASK);
-  rccEnableAHB(STM32_GPIO_EN_MASK, true);
-
-  /* Initializing all the defined GPIO ports.*/
-#if STM32_HAS_GPIOA
-  gpio_init(GPIOA, &gpio_default_config.PAData);
-#endif
-#if STM32_HAS_GPIOB
-  gpio_init(GPIOB, &gpio_default_config.PBData);
-#endif
-#if STM32_HAS_GPIOC
-  gpio_init(GPIOC, &gpio_default_config.PCData);
-#endif
-#if STM32_HAS_GPIOD
-  gpio_init(GPIOD, &gpio_default_config.PDData);
-#endif
-#if STM32_HAS_GPIOE
-  gpio_init(GPIOE, &gpio_default_config.PEData);
-#endif
-#if STM32_HAS_GPIOF
-  gpio_init(GPIOF, &gpio_default_config.PFData);
-#endif
-#if STM32_HAS_GPIOG
-  gpio_init(GPIOG, &gpio_default_config.PGData);
-#endif
-#if STM32_HAS_GPIOH
-  gpio_init(GPIOH, &gpio_default_config.PHData);
-#endif
-#if STM32_HAS_GPIOI
-  gpio_init(GPIOI, &gpio_default_config.PIData);
-#endif
-#if STM32_HAS_GPIOJ
-  gpio_init(GPIOJ, &gpio_default_config.PJData);
-#endif
-#if STM32_HAS_GPIOK
-  gpio_init(GPIOK, &gpio_default_config.PKData);
-#endif
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers.                                                */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-/**
- * @brief   Early initialization code.
- * @details GPIO ports and system clocks are initialized before everything
- *          else.
- */
-void __early_init(void) {
-  extern void enter_bootloader_mode_if_requested(void);
-  enter_bootloader_mode_if_requested();
-  stm32_gpio_init();
-  stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-  SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
-  SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
-}

keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -1,923 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#ifndef BOARD_H
-#define BOARD_H
-
-/*
- * Setup for ST STM32F072B-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32F072B_DISCOVERY
-#define BOARD_NAME                  "ST STM32F072B-Discovery"
-
-/*
- * Board oscillators-related settings.
- * NOTE: LSE not fitted.
- * NOTE: HSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK                0U
-#endif
-
-#define STM32_LSEDRV                (3U << 3U)
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK                0U
-#endif
-
-#define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F072xB
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON                0U
-#define GPIOA_PIN1                  1U
-#define GPIOA_PIN2                  2U
-#define GPIOA_PIN3                  3U
-#define GPIOA_PIN4                  4U
-#define GPIOA_PIN5                  5U
-#define GPIOA_PIN6                  6U
-#define GPIOA_PIN7                  7U
-#define GPIOA_PIN8                  8U
-#define GPIOA_PIN9                  9U
-#define GPIOA_PIN10                 10U
-#define GPIOA_USB_DM                11U
-#define GPIOA_USB_DP                12U
-#define GPIOA_SWDIO                 13U
-#define GPIOA_SWCLK                 14U
-#define GPIOA_PIN15                 15U
-
-#define GPIOB_PIN0                  0U
-#define GPIOB_PIN1                  1U
-#define GPIOB_PIN2                  2U
-#define GPIOB_PIN3                  3U
-#define GPIOB_PIN4                  4U
-#define GPIOB_PIN5                  5U
-#define GPIOB_PIN6                  6U
-#define GPIOB_PIN7                  7U
-#define GPIOB_PIN8                  8U
-#define GPIOB_PIN9                  9U
-#define GPIOB_PIN10                 10U
-#define GPIOB_PIN11                 11U
-#define GPIOB_PIN12                 12U
-#define GPIOB_SPI2_SCK              13U
-#define GPIOB_SPI2_MISO             14U
-#define GPIOB_SPI2_MOSI             15U
-
-#define GPIOC_MEMS_CS               0U
-#define GPIOC_PIN1                  1U
-#define GPIOC_PIN2                  2U
-#define GPIOC_PIN3                  3U
-#define GPIOC_PIN4                  4U
-#define GPIOC_PIN5                  5U
-#define GPIOC_LED_RED               6U
-#define GPIOC_LED_BLUE              7U
-#define GPIOC_LED_ORANGE            8U
-#define GPIOC_LED_GREEN             9U
-#define GPIOC_PIN10                 10U
-#define GPIOC_PIN11                 11U
-#define GPIOC_PIN12                 12U
-#define GPIOC_PIN13                 13U
-#define GPIOC_OSC32_IN              14U
-#define GPIOC_OSC32_OUT             15U
-
-#define GPIOD_PIN0                  0U
-#define GPIOD_PIN1                  1U
-#define GPIOD_PIN2                  2U
-#define GPIOD_PIN3                  3U
-#define GPIOD_PIN4                  4U
-#define GPIOD_PIN5                  5U
-#define GPIOD_PIN6                  6U
-#define GPIOD_PIN7                  7U
-#define GPIOD_PIN8                  8U
-#define GPIOD_PIN9                  9U
-#define GPIOD_PIN10                 10U
-#define GPIOD_PIN11                 11U
-#define GPIOD_PIN12                 12U
-#define GPIOD_PIN13                 13U
-#define GPIOD_PIN14                 14U
-#define GPIOD_PIN15                 15U
-
-#define GPIOE_PIN0                  0U
-#define GPIOE_PIN1                  1U
-#define GPIOE_PIN2                  2U
-#define GPIOE_PIN3                  3U
-#define GPIOE_PIN4                  4U
-#define GPIOE_PIN5                  5U
-#define GPIOE_PIN6                  6U
-#define GPIOE_PIN7                  7U
-#define GPIOE_PIN8                  8U
-#define GPIOE_PIN9                  9U
-#define GPIOE_PIN10                 10U
-#define GPIOE_PIN11                 11U
-#define GPIOE_PIN12                 12U
-#define GPIOE_PIN13                 13U
-#define GPIOE_PIN14                 14U
-#define GPIOE_PIN15                 15U
-
-#define GPIOF_OSC_IN                0U
-#define GPIOF_OSC_OUT               1U
-#define GPIOF_PIN2                  2U
-#define GPIOF_PIN3                  3U
-#define GPIOF_PIN4                  4U
-#define GPIOF_PIN5                  5U
-#define GPIOF_PIN6                  6U
-#define GPIOF_PIN7                  7U
-#define GPIOF_PIN8                  8U
-#define GPIOF_PIN9                  9U
-#define GPIOF_PIN10                 10U
-#define GPIOF_PIN11                 11U
-#define GPIOF_PIN12                 12U
-#define GPIOF_PIN13                 13U
-#define GPIOF_PIN14                 14U
-#define GPIOF_PIN15                 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
-#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
-#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
-
-#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
-#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
-#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
-
-#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
-#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
-#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
-#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
-#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
-#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
-#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
-
-
-
-#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
-#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
-#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
-#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
-#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
-#define PIN_ODR_LOW(n)              (0U << (n))
-#define PIN_ODR_HIGH(n)             (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
-#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
-#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
-#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
-#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
-#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
-#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
-#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
-#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0  - BUTTON                    (input floating).
- * PA1  - PIN1                      (input pullup).
- * PA2  - PIN2                      (input pullup).
- * PA3  - PIN3                      (input pullup).
- * PA4  - PIN4                      (input pullup).
- * PA5  - PIN5                      (input pullup).
- * PA6  - PIN6                      (input pullup).
- * PA7  - PIN7                      (input pullup).
- * PA8  - PIN8                      (input pullup).
- * PA9  - PIN9                      (input pullup).
- * PA10 - PIN10                     (input pullup).
- * PA11 - USB_DM                    (input floating).
- * PA12 - USB_DP                    (input floating).
- * PA13 - SWDIO                     (alternate 0).
- * PA14 - SWCLK                     (alternate 0).
- * PA15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
-                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
-                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
-                                     PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
-                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
-                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
-                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
-                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
-                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
-                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
-                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
-                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
-                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
-                                     PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
-#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
-
-/*
- * GPIOB setup:
- *
- * PB0  - PIN0                      (input pullup).
- * PB1  - PIN1                      (input pullup).
- * PB2  - PIN2                      (input pullup).
- * PB3  - PIN3                      (input pullup).
- * PB4  - PIN4                      (input pullup).
- * PB5  - PIN5                      (input pullup).
- * PB6  - PIN6                      (input pullup).
- * PB7  - PIN7                      (input pullup).
- * PB8  - PIN8                      (input pullup).
- * PB9  - PIN9                      (input pullup).
- * PB10 - PIN10                     (input pullup).
- * PB11 - PIN11                     (input pullup).
- * PB12 - PIN12                     (input pullup).
- * PB13 - SPI2_SCK                  (alternate 0).
- * PB14 - SPI2_MISO                 (alternate 0).
- * PB15 - SPI2_MOSI                 (alternate 0).
- */
-#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
-#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
-                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
-                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
-
-/*
- * GPIOC setup:
- *
- * PC0  - MEMS_CS                   (output pushpull maximum).
- * PC1  - PIN1                      (input pullup).
- * PC2  - PIN2                      (input pullup).
- * PC3  - PIN3                      (input pullup).
- * PC4  - PIN4                      (input pullup).
- * PC5  - PIN5                      (input pullup).
- * PC6  - LED_RED                   (output pushpull maximum).
- * PC7  - LED_BLUE                  (output pushpull maximum).
- * PC8  - LED_ORANGE                (output pushpull maximum).
- * PC9  - LED_GREEN                 (output pushpull maximum).
- * PC10 - PIN10                     (input pullup).
- * PC11 - PIN11                     (input pullup).
- * PC12 - PIN12                     (input pullup).
- * PC13 - PIN13                     (input pullup).
- * PC14 - OSC32_IN                  (input floating).
- * PC15 - OSC32_OUT                 (input floating).
- */
-#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
-                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
-                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
-                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
-                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
-                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
-                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
-                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
-                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
-                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
-                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
-                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
-                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
-                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
-                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
-#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
-                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
-                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
-                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
-
-/*
- * GPIOD setup:
- *
- * PD0  - PIN0                      (input pullup).
- * PD1  - PIN1                      (input pullup).
- * PD2  - PIN2                      (input pullup).
- * PD3  - PIN3                      (input pullup).
- * PD4  - PIN4                      (input pullup).
- * PD5  - PIN5                      (input pullup).
- * PD6  - PIN6                      (input pullup).
- * PD7  - PIN7                      (input pullup).
- * PD8  - PIN8                      (input pullup).
- * PD9  - PIN9                      (input pullup).
- * PD10 - PIN10                     (input pullup).
- * PD11 - PIN11                     (input pullup).
- * PD12 - PIN12                     (input pullup).
- * PD13 - PIN13                     (input pullup).
- * PD14 - PIN14                     (input pullup).
- * PD15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
-#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
-
-/*
- * GPIOE setup:
- *
- * PE0  - PIN0                      (input pullup).
- * PE1  - PIN1                      (input pullup).
- * PE2  - PIN2                      (input pullup).
- * PE3  - PIN3                      (input pullup).
- * PE4  - PIN4                      (input pullup).
- * PE5  - PIN5                      (input pullup).
- * PE6  - PIN6                      (input pullup).
- * PE7  - PIN7                      (input pullup).
- * PE8  - PIN8                      (input pullup).
- * PE9  - PIN9                      (input pullup).
- * PE10 - PIN10                     (input pullup).
- * PE11 - PIN11                     (input pullup).
- * PE12 - PIN12                     (input pullup).
- * PE13 - PIN13                     (input pullup).
- * PE14 - PIN14                     (input pullup).
- * PE15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
-#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
-#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
-
-/*
- * GPIOF setup:
- *
- * PF0  - OSC_IN                    (input floating).
- * PF1  - OSC_OUT                   (input floating).
- * PF2  - PIN2                      (input pullup).
- * PF3  - PIN3                      (input pullup).
- * PF4  - PIN4                      (input pullup).
- * PF5  - PIN5                      (input pullup).
- * PF6  - PIN6                      (input pullup).
- * PF7  - PIN7                      (input pullup).
- * PF8  - PIN8                      (input pullup).
- * PF9  - PIN9                      (input pullup).
- * PF10 - PIN10                     (input pullup).
- * PF11 - PIN11                     (input pullup).
- * PF12 - PIN12                     (input pullup).
- * PF13 - PIN13                     (input pullup).
- * PF14 - PIN14                     (input pullup).
- * PF15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
-                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
-                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
-                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
-                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
-                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
-                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
-                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
-#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* BOARD_H */

keyboards/candybar/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/candybar/lefty/info.json

@@ -6,13 +6,6 @@
     "height": 4,
     "layouts": {
         "LAYOUT": {
-            "layout": [
-				{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Del", "x":11, "y":0}, {"label":"BkSp", "x":12, "y":0}, {"label":"7", "x":13, "y":0}, {"label":"8", "x":14, "y":0}, {"label":"9", "x":15, "y":0}, {"label":"*", "x":16, "y":0},
-				{"label":"Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"Enter", "x":11.25, "y":1, "w":1.75}, {"label":"4", "x":13, "y":1}, {"label":"5", "x":14, "y":1}, {"label":"6", "x":15, "y":1}, {"label":"-", "x":16, "y":1},
-				{"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"Shift", "x":10.75, "y":2, "w":1.25}, {"label":"&uarr;", "x":12, "y":2}, {"label":"1", "x":13, "y":2}, {"label":"2", "x":14, "y":2}, {"label":"3", "x":15, "y":2}, {"label":"+", "x":16, "y":2},
-				{"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"GUI", "x":1.25, "y":3, "w":1.25}, {"label":"Alt", "x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3, "w":1.75}, {"x":5.5, "y":3, "w":1}, {"label":"Backspace", "x":6.5, "y":3, "w":2.25}, {"label":"Menu", "x":8.75, "y":3, "w":1.25}, {"label":"Fn", "x":10, "y":3}, {"label":"&larr;", "x":11, "y":3}, {"label":"&darr;", "x":12, "y":3}, {"label":"&rarr;", "x":13, "y":3}, {"label":"0", "x":14, "y":3}, {"label":".", "x":15, "y":3}, {"label":"Enter", "x":16, "y":3}]
-        },
-        "LAYOUT_lefty": {
             "layout": [
                 {"label":"7", "x":0, "y":0}, {"label":"8", "x":1, "y":0}, {"label":"9", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"Esc", "x":4, "y":0}, {"label":"Q", "x":5, "y":0}, {"label":"W", "x":6, "y":0}, {"label":"E", "x":7, "y":0}, {"label":"R", "x":8, "y":0}, {"label":"T", "x":9, "y":0}, {"label":"Y", "x":10, "y":0}, {"label":"U", "x":11, "y":0}, {"label":"I", "x":12, "y":0}, {"label":"O", "x":13, "y":0}, {"label":"P", "x":14, "y":0}, {"label":"{", "x":15, "y":0}, {"label":"}", "x":16, "y":0},
                 {"label":"4", "x":0, "y":1}, {"label":"5", "x":1, "y":1}, {"label":"6", "x":2, "y":1}, {"label":"+", "x":3, "y":1}, {"label":"Tab", "x":4, "y":1, "w":1.25}, {"label":"A", "x":5.25, "y":1}, {"label":"S", "x":6.25, "y":1}, {"label":"D", "x":7.25, "y":1}, {"label":"F", "x":8.25, "y":1}, {"label":"G", "x":9.25, "y":1}, {"label":"H", "x":10.25, "y":1}, {"label":"J", "x":11.25, "y":1}, {"label":"K", "x":12.25, "y":1}, {"label":"L", "x":13.25, "y":1}, {"label":":", "x":14.25, "y":1}, {"label":"Enter", "x":15.25, "y":1, "w":1.75},

keyboards/candybar/lefty/keymaps/default/keymap.c

@@ -22,7 +22,7 @@
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap _BL: Base Layer (Default Layer)
    */
-[_BL] = LAYOUT_lefty(
+[_BL] = LAYOUT(
   KC_P7  , KC_P8, KC_P9  , KC_PAST, KC_ESC , KC_Q   , KC_W   , KC_E, KC_R   , KC_T  , KC_Y, KC_U   , KC_I   , KC_O   , KC_P   , KC_DEL , KC_BSPC , \
   KC_P4  , KC_P5, KC_P6  , KC_PMNS, KC_TAB , KC_A   , KC_S   , KC_D, KC_F   , KC_G  , KC_H, KC_J   , KC_K   , KC_L   , KC_SCLN,          KC_ENT  , \
   KC_P1  , KC_P2, KC_P3  , KC_PPLS, KC_LSFT,          KC_Z   , KC_X, KC_C   , KC_V  , KC_B, KC_N   , KC_M   , KC_COMM, KC_DOT , KC_UP   ,KC_RSFT , \
@@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Keymap _FL: Function Layer
   */
-  [_FL] = LAYOUT_lefty(
+  [_FL] = LAYOUT(
   KC_P7 , KC_P8, KC_P9  , KC_VOLU, RESET  , KC_Q   , KC_W   , KC_E, KC_R   , KC_T  , KC_Y, KC_U   , KC_I   , KC_LBRC, KC_RBRC, KC_INS , KC_BSPC , \
   KC_P4 , KC_P5, KC_P6  , KC_VOLD, KC_TAB , KC_A   , KC_SLCK, KC_D, KC_F   , KC_G  , KC_H, KC_J   , KC_K   , KC_L   , KC_QUOT,          KC_BSLS , \
   KC_P1 , KC_P2, KC_P3  , KC_PEQL, KC_LSFT,          KC_Z   , KC_X, KC_CAPS, KC_V  , KC_B, KC_NLCK, KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_PGUP , \

keyboards/candybar/lefty/lefty.c

@@ -14,7 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "candybar.h"
+#include "lefty.h"
 
 void matrix_init_kb(void) {
   matrix_init_user();

keyboards/candybar/lefty/lefty.h

@@ -17,19 +17,8 @@
 #pragma once
 #include "quantum.h"
 
-#define LAYOUT( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
-    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, k1d, k1e, k1f, k1g, \
-    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
-    k30, k31, k32,           k35,      k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g \
-) { \
-    { k00, k01  , k02, k03  , k04  , k05, k06  , k07, k08, k09, k0a, k0b  , k0c, k0d, k0e, k0f, k0g }  , \
-    { k10, k11  , k12, k13  , k14  , k15, k16  , k17, k18, k19, k1a, KC_NO, k1c, k1d, k1e, k1f, k1g }  , \
-    { k20, KC_NO, k22, k23  , k24  , k25, k26  , k27, k28, k29, k2a, k2b  , k2c, k2d, k2e, k2f, k2g }  , \
-    { k30, k31  , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b  , k3c, k3d, k3e, k3f, k3g } \
-}
 
-#define LAYOUT_lefty( \
+#define LAYOUT( \
     k0d, k0e, k0f, k0g, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
     k1d, k1e, k1f, k1g, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
     k2d, k2e, k2f, k2g, k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
@@ -40,5 +29,3 @@
     { k20, KC_NO, k22, k23  , k24  , k25, k26  , k27, k28, k29, k2a, k2b  , k2c, k2d, k2e, k2f, k2g }  , \
     { k30, k31  , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b  , k3c, k3d, k3e, k3f, k3g } \
 }
-
-#define LAYOUT_righty LAYOUT

keyboards/candybar/lefty/readme.md

@@ -0,0 +1,15 @@
+# The Key Company Candybar
+
+![Candybar](https://cdn.shopify.com/s/files/1/1679/2319/articles/CandyBar_Promo_400x225_1000x.jpg?v=1538150501)
+
+The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller.
+
+* Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)
+* Hardware Supported: TKC Candybar
+* Hardware Availability: [TheKey.Company](https://thekey.company/collections/candybar)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make candybar/lefty:default:dfu-util
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/candybar/lefty/rules.mk

@@ -1,6 +1,5 @@
 # MCU name
 MCU = STM32F072
-BOARD = ST_STM32F072B_DISCOVERY
 
 # Build Options
 #   comment out to disable the options.

keyboards/candybar/readme.md

@@ -1,18 +0,0 @@
-The Key Company Candybar
-===
-
-![Candybar](https://cdn.shopify.com/s/files/1/1679/2319/articles/CandyBar_Promo_400x225_1000x.jpg?v=1538150501)
-
-
-The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller.
-
-Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)  
-Hardware Supported: TKC Candybar 
-Hardware Availability: Via GB  
-
-
-Make example for this keyboard (after setting up your build environment):
-
-    make candybar:default:dfu-util
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/candybar/righty/config.h

@@ -0,0 +1,115 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0006
+#define MANUFACTURER    The Key Company
+#define PRODUCT         Candybar
+#define DESCRIPTION     A compact staggered 40% keyboard with attached numpad
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 17
+#define DIODE_DIRECTION COL2ROW
+#define MATRIX_ROW_PINS { A8, A9, A10, A13 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B10, B11, B12, B13, B14, B15 }
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+// #define WS2812_LED_N 2
+// #define RGBLED_NUM WS2812_LED_N
+// #define WS2812_TIM_N 2
+// #define WS2812_TIM_CH 2
+// #define PORT_WS2812     GPIOA
+// #define PIN_WS2812      1
+// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+//#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
+//#define WS2812_EXTERNAL_PULLUP

keyboards/candybar/righty/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "TKC Candybar",
+    "url": "",
+    "maintainer": "terrymathews",
+    "width": 17,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+				{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Del", "x":11, "y":0}, {"label":"BkSp", "x":12, "y":0}, {"label":"7", "x":13, "y":0}, {"label":"8", "x":14, "y":0}, {"label":"9", "x":15, "y":0}, {"label":"*", "x":16, "y":0},
+				{"label":"Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"Enter", "x":11.25, "y":1, "w":1.75}, {"label":"4", "x":13, "y":1}, {"label":"5", "x":14, "y":1}, {"label":"6", "x":15, "y":1}, {"label":"-", "x":16, "y":1},
+				{"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"Shift", "x":10.75, "y":2, "w":1.25}, {"label":"&uarr;", "x":12, "y":2}, {"label":"1", "x":13, "y":2}, {"label":"2", "x":14, "y":2}, {"label":"3", "x":15, "y":2}, {"label":"+", "x":16, "y":2},
+				{"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"GUI", "x":1.25, "y":3, "w":1.25}, {"label":"Alt", "x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3, "w":1.75}, {"x":5.5, "y":3, "w":1}, {"label":"Backspace", "x":6.5, "y":3, "w":2.25}, {"label":"Menu", "x":8.75, "y":3, "w":1.25}, {"label":"Fn", "x":10, "y":3}, {"label":"&larr;", "x":11, "y":3}, {"label":"&darr;", "x":12, "y":3}, {"label":"&rarr;", "x":13, "y":3}, {"label":"0", "x":14, "y":3}, {"label":".", "x":15, "y":3}, {"label":"Enter", "x":16, "y":3}]
+        }
+    }
+}

keyboards/candybar/righty/readme.md

@@ -0,0 +1,15 @@
+# The Key Company Candybar
+
+![Candybar](https://cdn.shopify.com/s/files/1/1679/2319/articles/CandyBar_Promo_400x225_1000x.jpg?v=1538150501)
+
+The Key Company Candybar is a staggered 40% board with a numpad utilizing the STM32F072 microcontroller.
+
+* Keyboard Maintainer: [Terry Mathews](https://github.com/TerryMathews/)
+* Hardware Supported: TKC Candybar
+* Hardware Availability: [TheKey.Company](https://thekey.company/collections/candybar)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make candybar/righty:default:dfu-util
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/candybar/righty/righty.c

@@ -0,0 +1,17 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "righty.h"

keyboards/candybar/righty/righty.h

@@ -0,0 +1,30 @@
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "quantum.h"
+
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, k1d, k1e, k1f, k1g, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, \
+    k30, k31, k32,           k35,      k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g \
+) { \
+    { k00, k01  , k02, k03  , k04  , k05, k06  , k07, k08, k09, k0a, k0b  , k0c, k0d, k0e, k0f, k0g }  , \
+    { k10, k11  , k12, k13  , k14  , k15, k16  , k17, k18, k19, k1a, KC_NO, k1c, k1d, k1e, k1f, k1g }  , \
+    { k20, KC_NO, k22, k23  , k24  , k25, k26  , k27, k28, k29, k2a, k2b  , k2c, k2d, k2e, k2f, k2g }  , \
+    { k30, k31  , k32, KC_NO, KC_NO, k35, KC_NO, k37, k38, k39, k3a, k3b  , k3c, k3d, k3e, k3f, k3g } \
+}

keyboards/candybar/righty/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = STM32F072
+
+# Build Options
+#   comment out to disable the options.
+#
+# EXTRAFLAGS+=-flto
+LINK_TIME_OPTIMIZATION_ENABLE = yes
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no  # Console for debug
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes     # USB Nkey Rollover
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+SERIAL_LINK_ENABLE = no
+
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/ergodox_ez/keymaps/danielo515/config.h

@@ -16,10 +16,6 @@
 
 #undef MOUSEKEY_WHEEL_TIME_TO_MAX
 #define MOUSEKEY_WHEEL_TIME_TO_MAX 60
-// Timeout settings for leader key
-#undef  LEADER_TIMEOUT
-#define LEADER_TIMEOUT 350
-#define LEADER_PER_KEY_TIMING
 
 #undef DEBOUNCE
 #define DEBOUNCE 45

keyboards/ergodox_ez/keymaps/danielo515/keymap.c

@@ -36,9 +36,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     OSM(MOD_LSFT)       ,LT(2,KC_BSPACE)     ,OSM(MOD_LGUI)              ,
 
 
-    TO(1)               ,KC_6                ,KC_7                ,KC_8                ,TD_F9               ,LT(3,KC_0)          ,KC_DQUO             ,
+    TO(1)               ,KC_6                ,KC_7                ,KC_8                ,KC_9                ,LT(3,KC_0)          ,KC_DQUO             ,
     KC_UNDS             ,KC_Y                ,KC_U                ,KC_I                ,KC_O                ,KC_P                ,RSFT_T(KC_MINUS)            ,
-    HYPR_T(KC_H)        ,ALT_T(KC_J)         ,RCTL_T(KC_K)        ,LT(6,KC_L)          ,TD_CLN              ,GUI_T(KC_QUOTE)     ,
+    HYPR_H              ,ALT_J               ,CTL_K               ,LT(6,KC_L)          ,TD_CLN              ,CMD_QUOT            ,
     ALT_TAB             ,KC_N                ,MEH_T(KC_M)         ,KC_COMMA            ,KC_DOT              ,KC_SLASH            ,LT(4,KC_KP_ASTERISK),
     LT(4,KC_ENTER)      ,KC_DOWN             ,KC_LBRACKET         ,KC_RBRACKET         ,OSL(2)              ,
     KC_AUDIO_MUTE       ,KC_ESCAPE           ,
@@ -88,14 +88,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_LABK            ,KC_RABK            ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,
     KC_TRANSPARENT     ,KC_AT              ,KC_TRANSPARENT     ,KC_EQL             ,F_ARROW            ,KC_GRAVE           ,
     KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_LBRACKET        ,KC_RBRACKET        ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,
-    KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,
+    KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,IARROW             ,ARROW               ,
     KC_TRANSPARENT     ,KC_TRANSPARENT     ,
     KC_TRANSPARENT     ,
     // Right hand
     KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,
     KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,
     LALT(LSFT(KC_UP))  ,KC_HASH            ,KC_LCBR            ,KC_RCBR            ,KC_KP_ASTERISK     ,KC_PERC            ,KC_DLR             ,
-                        KC_AMPR            ,KC_LPRN            ,KC_RPRN            ,KC_CIRC            ,KC_KP_PLUS         ,KC_PIPE            ,
+                        KC_AMPR            ,KC_LPRN            ,KC_RPRN            ,CLN_EQ             ,KC_KP_PLUS         ,KC_PIPE            ,
     LALT(LSFT(KC_DOWN)),KC_EXLM            ,KC_TILD            ,KC_CIRC            ,ARROW              ,KC_BSLASH          ,KC_BSLASH          ,
     KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,KC_TRANSPARENT     ,
     RESET              ,KC_TRANSPARENT     ,
@@ -316,3 +316,11 @@ void oneshot_mods_changed_user(uint8_t mods) {
 void oneshot_locked_mods_changed_user(uint8_t mods) {
     oneshot_mods_changed_user(mods);
 }
+
+//=============== alt_tab callbacks
+void alt_tab_activated(void){
+    layer_on(7); // activate motion layer
+}
+void alt_tab_deactivated(void){
+    layer_off(7); // activate motion layer
+}

keyboards/handwired/prkl30/keymaps/erkhal/keymap.c

@@ -0,0 +1,102 @@
+#include QMK_KEYBOARD_H
+#include "keymap_nordic.h"
+enum layers {
+  _DEFAULT,
+  _LOWER,
+  _RAISE,
+  _FN
+};
+
+enum custom_keycodes {
+    PRKL = SAFE_RANGE,
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define FN MO(_FN)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Default
+ * ,-----------------------------------------------------------------------------------.------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |  ¨^  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|------|
+ * |  Tab |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   Ö  |  Ä   | Entr |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|------'
+ * | Shift|   Z  |   X  |   C  |   V  |    Space    |   B  |   N  |   M  |   ,  |   .  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------'
+ */
+[_DEFAULT] = LAYOUT_2u_space(
+    KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,               KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    NO_QUOT, KC_BSPC,
+    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,               KC_H,    KC_J,    KC_K,    KC_L,    NO_AE,   NO_OSLH, LT(_FN, KC_ENT),
+    KC_LSFT, LGUI_T(KC_Z),    KC_X,    KC_C,    KC_V,  LT(_LOWER, KC_SPC),    KC_B,    KC_N,    KC_M,    KC_COMM, LT(_RAISE, KC_DOT)
+),
+
+/* Lower - Numbers and some symbols
+ * ,------------------------------------------------------------------------------------------.
+ * |   ~  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0   |  +  | DEL  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|------|
+ * |      | TAB  |      |      |      |      |      |      |      |      |      |   '  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|------'
+ * |      |      |      |      |      |             |      |      |      |  -   |      |
+ * `------+------+------+------+------+------+------+------+------+------+------+------'
+ */
+[_LOWER] = LAYOUT_2u_space(
+    KC_TILD, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    NO_PLUS, KC_DEL,
+    _______, KC_TAB, _______, _______, _______, _______, _______, _______, _______, _______, _______, NO_APOS, _______,
+    _______, _______, _______, _______, _______, _______,      _______,    _______, _______, NO_MINS, _______
+),
+
+/* Raise - AltGred Characters and more symbols
+ * ,------------------------------------------------------------------------------------------.
+ * |   ~  |   >  |   @  |   £  |   $  |   %  |   &  |   |  |   [  |   ]  |   ≈  | ?    | {    |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|------|
+ * |      |      |      |  UP  |      |      |      |      |      |      |      |      | }    |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|------'
+ * |      |   <  | LEFT | DOWN | RIGHT|             |      |      |      |      |      |
+ * `------+------+------+------+------+------+------+------+------+------+------+------'
+ */
+[_RAISE] = LAYOUT_2u_space(
+    NO_TILD, NO_SECT, NO_AT,   NO_PND,  NO_DLR,  KC_PERC, NO_AMPR, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_QUES, LSFT(NO_LBRC),
+    _______, _______, _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, LSFT(NO_RBRC),
+    _______, NO_HALF, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______
+),
+
+ /* FN
+ * ,------------------------------------------------------------------------------------------.
+ * |RESET |   F1 |   F2 |   F3 |   F4 |   F5 |   F6 |   F7 |   F8 |   F9 |  F10 |  F11 | F12  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|------|
+ * |      |RGB_P |RGB_HD|RGB_HI| VOL- | PREV | NEXT | VOL+ |      |      |      | PRKL |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|------'
+ * | RGB_M|RGB_VD|RGB_VI|RGB_TG|      | PLAY/PAUSE  |      |      |      |LCA(DEL)|    |
+ * `------+------+------+------+------+------+------+------+------+------+------+------'
+ */
+[_FN] = LAYOUT_2u_space(
+    RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+    _______, RGB_M_P, RGB_HUD, RGB_HUI, KC_VOLD, KC_MPRV, KC_MNXT, KC_VOLU, _______, _______, _______, PRKL,    _______,
+    RGB_MOD, RGB_VAD, RGB_VAI, RGB_TOG, _______, KC_MPLY, _______, _______, _______, LCA(KC_DEL), _______
+),
+
+
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (clockwise) {
+      tap_code16(LCTL(KC_RIGHT));
+    } else {
+      tap_code16(LCTL(KC_LEFT));
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case PRKL:
+      if (record->event.pressed) {
+        //When PRKL is pressed, print out the holy power word of our people
+        SEND_STRING("PERKELE");
+      }
+      break;
+  }
+  return true;
+};

keyboards/handwired/prkl30/keymaps/erkhal/readme.md

@@ -0,0 +1,16 @@
+# The default keymap for PRKL30
+
+Layout geared towards productivity with OSX
+-----
+
+Default layer  
+![prkl30 default layout image](https://i.imgur.com/tekFaHW.png "default")
+
+Lower  
+![prkl30 lower layout image](https://i.imgur.com/5F4CL4g.png "lower")
+
+Raise  
+![prkl30 raise layout image](https://i.imgur.com/BpC8T6p.png "raise")
+
+FN  
+![prkl30 fn layout image](https://i.imgur.com/gwgIKqj.png "fn")

keyboards/kira80/keymaps/ansi/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2020 Lorenz Wellmer
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_tkl_ansi(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,               KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,               KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,                        KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_RGUI, KC_RCTL,               KC_LEFT, KC_DOWN, KC_RGHT),
+
+    [1] = LAYOUT_tkl_ansi(
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               BL_TOGG, BL_DEC,  BL_INC,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               KC_TRNS, KC_TRNS, KC_VOLU,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               KC_MPLY, KC_MNXT, KC_VOLD,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,                        KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/kira80/keymaps/ansi/readme.md

@@ -0,0 +1 @@
+# The default ANSI keymap for Kira 80

keyboards/kira80/keymaps/ansi_wkl/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2020 Lorenz Wellmer
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_tkl_ansi_wkl(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,               KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,               KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,                        KC_UP,
+        KC_LCTL,          KC_LALT,                            KC_SPC,                                      KC_RALT,          MO(1),                 KC_LEFT, KC_DOWN, KC_RGHT),
+
+    [1] = LAYOUT_tkl_ansi_wkl(
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               BL_TOGG, BL_DEC,  BL_INC,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               KC_TRNS, KC_TRNS, KC_VOLU,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               KC_MPLY, KC_MNXT, KC_VOLD,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,                        KC_TRNS,
+        KC_TRNS,          KC_TRNS,                            KC_TRNS,                                     KC_TRNS,          KC_TRNS,               KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/kira80/keymaps/ansi_wkl/readme.md

@@ -0,0 +1 @@
+# The default ANSI WKL keymap for Kira 80

keyboards/kira80/keymaps/default/keymap.c

@@ -26,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_RGUI, KC_RCTL,               KC_LEFT, KC_DOWN, KC_RGHT),
 
     [1] = LAYOUT_all(
-        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI,               BL_TOGG, BL_DEC,  BL_INC,
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               BL_TOGG, BL_DEC,  BL_INC,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,      KC_TRNS, KC_TRNS, KC_VOLU,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               KC_MPLY, KC_MNXT, KC_VOLD,
         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,

keyboards/kira80/keymaps/default/readme.md

@@ -1 +1 @@
-# The default keymap for kira80
+# The default keymap for Kira 80

keyboards/kira80/keymaps/iso/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2020 Lorenz Wellmer
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_tkl_iso(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,               KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,                        KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,  
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,                        KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_RGUI, KC_RCTL,               KC_LEFT, KC_DOWN, KC_RGHT),
+
+    [1] = LAYOUT_tkl_iso(
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               BL_TOGG, BL_DEC,  BL_INC,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               KC_TRNS, KC_TRNS, KC_VOLU,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                        KC_MPLY, KC_MNXT, KC_VOLD,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,                        KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/kira80/keymaps/iso/readme.md

@@ -0,0 +1 @@
+# The default ISO keymap for Kira 80

keyboards/kira80/kira80.h

@@ -52,10 +52,10 @@
     K075, K076, K077,                   K079,                   K083, K084, K085, K086,          K087, K088, K082   \
 ) { \
     { K000,  K001,  K002,  K003,  K004,  K005,  KC_NO, K007,  K008,  K009,  K010,  K011,  K012,  K013,  KC_NO }, \
-    { K015,  K016,  K017,  K018,  K019,  K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028,  K029  }, \
+    { K015,  K016,  K017,  K018,  K019,  K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028,  KC_NO }, \
     { K030,  K031,  K032,  K033,  K034,  K035,  K036,  K037,  K038,  K039,  K040,  K041,  K042,  K043,  KC_NO }, \
-    { K045,  K046,  K047,  K048,  K049,  K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058,  KC_NO }, \
+    { K045,  K046,  K047,  K048,  K049,  K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  KC_NO, KC_NO }, \
-    { K060,  K061,  K062,  K063,  K064,  K065,  K066,  K067,  K068,  K069,  K070,  K071,  K072,  K073,  KC_NO }, \
+    { K060,  K061,  K062,  K063,  K064,  K065,  K066,  K067,  K068,  K069,  K070,  K071,  KC_NO, K073,  KC_NO }, \
     { K075,  K076,  K077,  KC_NO, K079,  KC_NO, KC_NO, K082,  K083,  K084,  K085,  K086,  K087,  K088,  KC_NO }, \
     { KC_NO, K091,  K092,  KC_NO, K094,  K095,  K096,  K097,  K098,  KC_NO, KC_NO, KC_NO, K102,  K103,  KC_NO }  \
 }
@@ -69,11 +69,11 @@
     K075,       K077,                   K079,                         K084,       K086,          K087, K088, K082   \
 ) { \
     { K000,  K001,  K002,  K003,  K004,  K005,  KC_NO, K007,  K008,  K009,  K010,  K011,  K012,  K013,  KC_NO }, \
-    { K015,  K016,  K017,  K018,  K019,  K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028,  K029  }, \
+    { K015,  K016,  K017,  K018,  K019,  K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028,  KC_NO }, \
     { K030,  K031,  K032,  K033,  K034,  K035,  K036,  K037,  K038,  K039,  K040,  K041,  K042,  K043,  KC_NO }, \
-    { K045,  K046,  K047,  K048,  K049,  K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058,  KC_NO }, \
+    { K045,  K046,  K047,  K048,  K049,  K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  KC_NO, KC_NO }, \
-    { K060,  K061,  K062,  K063,  K064,  K065,  K066,  K067,  K068,  K069,  K070,  K071,  K072,  K073,  KC_NO }, \
+    { K060,  K061,  K062,  K063,  K064,  K065,  K066,  K067,  K068,  K069,  K070,  K071,  KC_NO, K073,  KC_NO }, \
-    { K075,  K076,  K077,  KC_NO, K079,  KC_NO, KC_NO, K082,  K083,  K084,  K085,  K086,  K087,  K088,  KC_NO }, \
+    { K075,  KC_NO, K077,  KC_NO, K079,  KC_NO, KC_NO, K082,  KC_NO, K084,  KC_NO, K086,  K087,  K088,  KC_NO }, \
     { KC_NO, K091,  K092,  KC_NO, K094,  K095,  K096,  K097,  K098,  KC_NO, KC_NO, KC_NO, K102,  K103,  KC_NO }  \
 }
 
@@ -86,10 +86,10 @@
     K075, K076, K077,                   K079,                   K083, K084, K085, K086,          K087, K088, K082   \
 ) { \
     { K000,  K001,  K002,  K003,  K004,  K005,  KC_NO, K007,  K008,  K009,  K010,  K011,  K012,  K013,  KC_NO }, \
-    { K015,  K016,  K017,  K018,  K019,  K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028,  K029  }, \
+    { K015,  K016,  K017,  K018,  K019,  K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028,  KC_NO }, \
     { K030,  K031,  K032,  K033,  K034,  K035,  K036,  K037,  K038,  K039,  K040,  K041,  K042,  K043,  KC_NO }, \
     { K045,  K046,  K047,  K048,  K049,  K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058,  KC_NO }, \
-    { K060,  K061,  K062,  K063,  K064,  K065,  K066,  K067,  K068,  K069,  K070,  K071,  K072,  K073,  KC_NO }, \
+    { K060,  K061,  K062,  K063,  K064,  K065,  K066,  K067,  K068,  K069,  K070,  K071,  KC_NO, K073,  KC_NO }, \
     { K075,  K076,  K077,  KC_NO, K079,  KC_NO, KC_NO, K082,  K083,  K084,  K085,  K086,  K087,  K088,  KC_NO }, \
     { KC_NO, K091,  K092,  KC_NO, K094,  K095,  K096,  K097,  K098,  KC_NO, KC_NO, KC_NO, K102,  K103,  KC_NO }  \
 }

keyboards/kmac/rules.mk

@@ -27,7 +27,8 @@ CUSTOM_MATRIX = yes         # Custom matrix file
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+BACKLIGHT_DRIVER = custom
 MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/mxss/rgblight.h

@@ -16,8 +16,6 @@
 #ifndef RGBLIGHT_H
 #define RGBLIGHT_H
 
-#include "rgblight_reconfig.h"
-
 /***** rgblight_mode(mode)/rgblight_mode_noeeprom(mode) ****
 
  old mode number (before 0.6.117) to new mode name table
@@ -64,6 +62,39 @@
 |-----------------|-----------------------------------|
  *****/
 
+#ifdef RGBLIGHT_ANIMATIONS
+// for backward compatibility
+#    define RGBLIGHT_EFFECT_BREATHING
+#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#    define RGBLIGHT_EFFECT_SNAKE
+#    define RGBLIGHT_EFFECT_KNIGHT
+#    define RGBLIGHT_EFFECT_CHRISTMAS
+#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#    define RGBLIGHT_EFFECT_RGB_TEST
+#    define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+#ifdef RGBLIGHT_STATIC_PATTERNS
+#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#endif
+
+// clang-format off
+
+// check dynamic animation effects chose ?
+#if  defined(RGBLIGHT_EFFECT_BREATHING)     \
+  || defined(RGBLIGHT_EFFECT_RAINBOW_MOOD)  \
+  || defined(RGBLIGHT_EFFECT_RAINBOW_SWIRL) \
+  || defined(RGBLIGHT_EFFECT_SNAKE)         \
+  || defined(RGBLIGHT_EFFECT_KNIGHT)        \
+  || defined(RGBLIGHT_EFFECT_CHRISTMAS)     \
+  || defined(RGBLIGHT_EFFECT_RGB_TEST)      \
+  || defined(RGBLIGHT_EFFECT_ALTERNATING)
+#    define RGBLIGHT_USE_TIMER
+#endif
+
+// clang-format on
+
 #define _RGBM_SINGLE_STATIC(sym) RGBLIGHT_MODE_##sym,
 #define _RGBM_SINGLE_DYNAMIC(sym) RGBLIGHT_MODE_##sym,
 #define _RGBM_MULTI_STATIC(sym) RGBLIGHT_MODE_##sym,
@@ -263,12 +294,19 @@ void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom);
 #    define EZ_RGB(val) rgblight_show_solid_color((val >> 16) & 0xFF, (val >> 8) & 0xFF, val & 0xFF)
 void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b);
 
+#    ifdef RGBLIGHT_USE_TIMER
 void rgblight_task(void);
-
 void rgblight_timer_init(void);
 void rgblight_timer_enable(void);
 void rgblight_timer_disable(void);
 void rgblight_timer_toggle(void);
+#    else
+#        define rgblight_task()
+#        define rgblight_timer_init()
+#        define rgblight_timer_enable()
+#        define rgblight_timer_disable()
+#        define rgblight_timer_toggle()
+#    endif
 
 #    ifdef RGBLIGHT_SPLIT
 #        define RGBLIGHT_STATUS_CHANGE_MODE (1 << 0)

keyboards/oddball/adns.c

@@ -0,0 +1,270 @@
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include "quantum.h"
+#include "pointing_device.h"
+#include "adns9800_srom_A4.h"
+#include "../../lib/lufa/LUFA/Drivers/Peripheral/SPI.h"
+
+// registers
+#define REG_Product_ID                           0x00
+#define REG_Revision_ID                          0x01
+#define REG_Motion                               0x02
+#define REG_Delta_X_L                            0x03
+#define REG_Delta_X_H                            0x04
+#define REG_Delta_Y_L                            0x05
+#define REG_Delta_Y_H                            0x06
+#define REG_SQUAL                                0x07
+#define REG_Pixel_Sum                            0x08
+#define REG_Maximum_Pixel                        0x09
+#define REG_Minimum_Pixel                        0x0a
+#define REG_Shutter_Lower                        0x0b
+#define REG_Shutter_Upper                        0x0c
+#define REG_Frame_Period_Lower                   0x0d
+#define REG_Frame_Period_Upper                   0x0e
+#define REG_Configuration_I                      0x0f
+#define REG_Configuration_II                     0x10
+#define REG_Frame_Capture                        0x12
+#define REG_SROM_Enable                          0x13
+#define REG_Run_Downshift                        0x14
+#define REG_Rest1_Rate                           0x15
+#define REG_Rest1_Downshift                      0x16
+#define REG_Rest2_Rate                           0x17
+#define REG_Rest2_Downshift                      0x18
+#define REG_Rest3_Rate                           0x19
+#define REG_Frame_Period_Max_Bound_Lower         0x1a
+#define REG_Frame_Period_Max_Bound_Upper         0x1b
+#define REG_Frame_Period_Min_Bound_Lower         0x1c
+#define REG_Frame_Period_Min_Bound_Upper         0x1d
+#define REG_Shutter_Max_Bound_Lower              0x1e
+#define REG_Shutter_Max_Bound_Upper              0x1f
+#define REG_LASER_CTRL0                          0x20
+#define REG_Observation                          0x24
+#define REG_Data_Out_Lower                       0x25
+#define REG_Data_Out_Upper                       0x26
+#define REG_SROM_ID                              0x2a
+#define REG_Lift_Detection_Thr                   0x2e
+#define REG_Configuration_V                      0x2f
+#define REG_Configuration_IV                     0x39
+#define REG_Power_Up_Reset                       0x3a
+#define REG_Shutdown                             0x3b
+#define REG_Inverse_Product_ID                   0x3f
+#define REG_Motion_Burst                         0x50
+#define REG_SROM_Load_Burst                      0x62
+#define REG_Pixel_Burst                          0x64
+
+// pins
+#define NCS 0
+
+extern const uint16_t firmware_length;
+extern const uint8_t firmware_data[];
+
+enum motion_burst_property{
+    motion = 0,
+    observation,
+    delta_x_l,
+    delta_x_h,
+    delta_y_l,
+    delta_y_h,
+    squal,
+    pixel_sum,
+    maximum_pixel,
+    minimum_pixel,
+    shutter_upper,
+    shutter_lower,
+    frame_period_upper,
+    frame_period_lower,
+    end_data
+};
+
+// used to track the motion delta between updates
+volatile int32_t delta_x;
+volatile int32_t delta_y;
+
+void adns_begin(void){
+    PORTB &= ~ (1 << NCS);
+}
+
+void adns_end(void){
+    PORTB |= (1 << NCS);
+}
+
+void adns_write(uint8_t reg_addr, uint8_t data){
+
+    adns_begin();
+
+    //send address of the register, with MSBit = 1 to indicate it's a write
+    SPI_TransferByte(reg_addr | 0x80 );
+    SPI_TransferByte(data);
+
+    // tSCLK-NCS for write operation
+    wait_us(20);
+
+    adns_end();
+
+    // tSWW/tSWR (=120us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound
+    wait_us(100);
+}
+
+uint8_t adns_read(uint8_t reg_addr){
+
+    adns_begin();
+
+    // send adress of the register, with MSBit = 0 to indicate it's a read
+    SPI_TransferByte(reg_addr & 0x7f );
+    uint8_t data = SPI_TransferByte(0);
+
+    // tSCLK-NCS for read operation is 120ns
+    wait_us(1);
+
+    adns_end();
+
+    //  tSRW/tSRR (=20us) minus tSCLK-NCS
+    wait_us(19);
+
+    return data;
+}
+
+void pointing_device_init(void) {
+
+    if(!is_keyboard_master())
+        return;
+
+    // interrupt 2
+    EICRA &= ~(1 << 4);
+    EICRA |= (1 << 5);
+    EIMSK |= (1<<INT2);
+
+    // mode 3
+    SPI_Init(
+        SPI_SPEED_FCPU_DIV_8 |
+        SPI_ORDER_MSB_FIRST |
+        SPI_SCK_LEAD_FALLING |
+        SPI_SAMPLE_TRAILING |
+        SPI_MODE_MASTER);
+
+    // set B0 output
+    DDRB |= (1 << 0);
+
+    // reset serial port
+    adns_end();
+    adns_begin();
+    adns_end();
+
+    // reboot
+    adns_write(REG_Power_Up_Reset, 0x5a);
+    wait_ms(50);
+
+    // read registers and discard
+    adns_read(REG_Motion);
+    adns_read(REG_Delta_X_L);
+    adns_read(REG_Delta_X_H);
+    adns_read(REG_Delta_Y_L);
+    adns_read(REG_Delta_Y_H);
+
+    // upload firmware
+
+    // set the configuration_IV register in 3k firmware mode
+    // bit 1 = 1 for 3k mode, other bits are reserved
+    adns_write(REG_Configuration_IV, 0x02);
+
+    // write 0x1d in SROM_enable reg for initializing
+    adns_write(REG_SROM_Enable, 0x1d);
+
+    // wait for more than one frame period
+    // assume that the frame rate is as low as 100fps... even if it should never be that low
+    wait_ms(10);
+
+    // write 0x18 to SROM_enable to start SROM download
+    adns_write(REG_SROM_Enable, 0x18);
+
+    // write the SROM file (=firmware data)
+    adns_begin();
+
+    // write burst destination adress
+    SPI_TransferByte(REG_SROM_Load_Burst | 0x80);
+    wait_us(15);
+
+    // send all bytes of the firmware
+    unsigned char c;
+    for(int i = 0; i < firmware_length; i++){
+        c = (unsigned char)pgm_read_byte(firmware_data + i);
+        SPI_TransferByte(c);
+        wait_us(15);
+    }
+
+    adns_end();
+
+    wait_ms(10);
+
+    // enable laser(bit 0 = 0b), in normal mode (bits 3,2,1 = 000b)
+    // reading the actual value of the register is important because the real
+    // default value is different from what is said in the datasheet, and if you
+    // change the reserved bytes (like by writing 0x00...) it would not work.
+    uint8_t laser_ctrl0 = adns_read(REG_LASER_CTRL0);
+    adns_write(REG_LASER_CTRL0, laser_ctrl0 & 0xf0);
+
+    wait_ms(1);
+
+    // set the configuration_I register to set the CPI
+    // 0x01 = 50, minimum
+    // 0x44 = 3400, default
+    // 0x8e = 7100
+    // 0xA4 = 8200, maximum
+    adns_write(REG_Configuration_I, 0x04);
+
+    wait_ms(100);
+}
+
+void pointing_device_task(void) {
+
+    if(!is_keyboard_master())
+        return;
+
+    report_mouse_t report = pointing_device_get_report();
+
+    // clamp deltas from -127 to 127
+    report.x = delta_x < -127 ? 127 : delta_x > 127 ? 127 : delta_x;
+    report.x = -report.x;
+
+    report.y = delta_y < -127 ? 127 : delta_y > 127 ? 127 : delta_y;
+
+    // reset deltas
+    delta_x = 0;
+    delta_y = 0;
+
+    pointing_device_set_report(report);
+    pointing_device_send();
+}
+
+int16_t convertDeltaToInt(uint8_t high, uint8_t low){
+
+    // join bytes into twos compliment
+    uint16_t twos_comp = (high << 8) | low;
+
+    // convert twos comp to int
+    if (twos_comp & 0x8000)
+        return -1 * ((twos_comp ^ 0xffff) + 1);
+
+    return twos_comp;
+}
+
+ISR(INT2_vect) {
+    // called on interrupt 2 when sensed motion
+    // copy burst data from the respective registers
+
+    adns_begin();
+
+    // send adress of the register, with MSBit = 1 to indicate it's a write
+    SPI_TransferByte(REG_Motion_Burst & 0x7f);
+
+    uint8_t burst_data[pixel_sum];
+
+    for (int i = 0; i < pixel_sum; ++i) {
+        burst_data[i] = SPI_TransferByte(0);
+    }
+
+    delta_x += convertDeltaToInt(burst_data[delta_x_h], burst_data[delta_x_l]);
+    delta_y += convertDeltaToInt(burst_data[delta_y_h], burst_data[delta_y_l]);
+
+    adns_end();
+}

keyboards/oddball/adns9800_srom_A4.h

@@ -0,0 +1,212 @@
+#pragma once
+
+#include <avr/pgmspace.h>
+
+const uint16_t firmware_length = 3070;
+
+const uint8_t firmware_data[] PROGMEM = {
+0x03, 0xa4, 0x6e, 0x16, 0x6d, 0x89, 0x3e, 0xfe, 0x5f, 0x1c, 0xb8, 0xf2, 0x47, 0x0c, 0x7b,
+0x74, 0x6a, 0x56, 0x0f, 0x7d, 0x76, 0x71, 0x4b, 0x0c, 0x97, 0xb6, 0xcf, 0xfd, 0x78, 0x72,
+0x66, 0x2f, 0xbd, 0xf8, 0x53, 0x24, 0xab, 0xd4, 0x2c, 0xb0, 0xe4, 0x32, 0xf1, 0x6a, 0x56,
+0x2e, 0xbf, 0xfc, 0x7a, 0x57, 0x0d, 0x79, 0x70, 0x66, 0x46, 0x0e, 0x7f, 0x5d, 0x19, 0x91,
+0xaa, 0xc2, 0x0d, 0x8e, 0x7f, 0x5d, 0x19, 0xb0, 0xe2, 0x46, 0xef, 0x5c, 0x3a, 0xd7, 0x2c,
+0xbb, 0xf4, 0x6a, 0x37, 0xcd, 0x18, 0xb2, 0xc7, 0x0c, 0x9a, 0x97, 0x8f, 0x52, 0xfd, 0x0d,
+0xb8, 0x41, 0x00, 0x9e, 0x8e, 0x9a, 0x1e, 0x6d, 0x0c, 0xe2, 0xaa, 0x13, 0x93, 0xb8, 0xc1,
+0x2a, 0x29, 0xbb, 0x0b, 0xe3, 0x71, 0x08, 0x6d, 0xfd, 0xb6, 0xd9, 0xcf, 0x65, 0x21, 0x27,
+0x45, 0x1b, 0xbe, 0xe2, 0x61, 0x86, 0x3c, 0xbf, 0x68, 0x9c, 0xd6, 0x75, 0x01, 0x5e, 0xe0,
+0xc6, 0x92, 0x79, 0xf4, 0x6a, 0xa9, 0xbb, 0x2a, 0x79, 0xd0, 0xe1, 0x5c, 0x32, 0xb1, 0x5a,
+0x1b, 0xba, 0xaf, 0x11, 0xea, 0x24, 0x6a, 0x83, 0x4f, 0x8d, 0xed, 0x19, 0x62, 0x70, 0x54,
+0xfb, 0x0e, 0x1f, 0x83, 0xcc, 0xf0, 0xb7, 0xae, 0x05, 0xd3, 0x42, 0x5d, 0x48, 0xa0, 0x7a,
+0x0b, 0x73, 0xb3, 0xc8, 0xa6, 0xb7, 0x1b, 0x08, 0x13, 0x9b, 0x89, 0x44, 0x42, 0xae, 0xd8,
+0x6a, 0xba, 0x9b, 0x84, 0x25, 0x8b, 0xa4, 0x5e, 0x0b, 0x85, 0xb0, 0x8f, 0x8d, 0x80, 0x9c,
+0xd1, 0x52, 0xc7, 0xcb, 0xff, 0x8d, 0x8b, 0xdd, 0x87, 0xf2, 0x63, 0xca, 0xe7, 0x4f, 0x4a,
+0x57, 0x3c, 0xdf, 0xaf, 0xcb, 0x5c, 0xbb, 0x39, 0x0b, 0x01, 0x9c, 0x79, 0x22, 0x15, 0xb8,
+0xa0, 0xd3, 0x72, 0x02, 0x35, 0x20, 0x40, 0xe0, 0x17, 0xde, 0x89, 0x88, 0xce, 0xe9, 0x2b,
+0x75, 0xba, 0xa0, 0x96, 0x24, 0x1e, 0x71, 0xb5, 0x15, 0x00, 0x61, 0xe0, 0x5c, 0x93, 0x4e,
+0xea, 0x53, 0xd0, 0xfc, 0xef, 0xae, 0x2b, 0xeb, 0x8f, 0xc7, 0x69, 0x68, 0xc7, 0xfc, 0x1a,
+0x1f, 0x41, 0x0d, 0xd0, 0xc1, 0x03, 0xaf, 0xc9, 0xfd, 0xe4, 0x21, 0x43, 0xc4, 0xef, 0xc2,
+0xdd, 0x7b, 0x73, 0xbc, 0xca, 0xf4, 0xa5, 0x2e, 0x83, 0x90, 0x1f, 0x78, 0x41, 0xc3, 0x13,
+0x8e, 0x95, 0x0a, 0x57, 0xdf, 0x0a, 0x87, 0x40, 0x2b, 0xd9, 0xba, 0x56, 0x59, 0x9d, 0x2c,
+0xb2, 0xb8, 0xb3, 0xfb, 0x77, 0x78, 0x3a, 0xef, 0xbf, 0x2d, 0xc8, 0xb9, 0x94, 0x62, 0x47,
+0x92, 0x98, 0x42, 0x23, 0x07, 0xd9, 0x39, 0x46, 0x5e, 0x6f, 0xe0, 0x46, 0x14, 0x0e, 0x3d,
+0x74, 0x40, 0x21, 0xb4, 0x67, 0x05, 0xa8, 0xe2, 0x12, 0x93, 0x41, 0xc2, 0x80, 0xb9, 0x56,
+0x4b, 0xf9, 0x5a, 0x15, 0x9c, 0x37, 0xc4, 0x4b, 0x05, 0xad, 0x5a, 0xaf, 0xa1, 0x3e, 0xe4,
+0x6e, 0xc5, 0x91, 0xb6, 0x75, 0x7d, 0x1b, 0xe4, 0xc5, 0x4d, 0x28, 0x6b, 0xe9, 0xad, 0x20,
+0x8b, 0x64, 0x91, 0x57, 0x4f, 0xdf, 0x9a, 0x97, 0x7e, 0xbe, 0x8e, 0xd6, 0xd6, 0x3b, 0x17,
+0xf9, 0x19, 0x28, 0xb2, 0x2e, 0x8f, 0x26, 0xb4, 0x9b, 0xe5, 0xde, 0x0f, 0x8d, 0x0a, 0x9a,
+0x9d, 0x1b, 0xde, 0x6f, 0xcb, 0x84, 0xba, 0x26, 0xd0, 0x12, 0xef, 0x30, 0x38, 0x43, 0xac,
+0xb7, 0xa7, 0xef, 0x09, 0x7c, 0x52, 0x27, 0xfc, 0x2e, 0xab, 0x50, 0xa0, 0x21, 0x40, 0xe7,
+0xc1, 0x5f, 0x02, 0x41, 0x84, 0xa8, 0x54, 0xa8, 0x2e, 0x37, 0x6f, 0xd8, 0xb1, 0xa4, 0xd0,
+0x75, 0xef, 0x31, 0xca, 0x54, 0x1e, 0x33, 0xad, 0x19, 0xa1, 0x94, 0xbc, 0x1b, 0x34, 0x6c,
+0xfb, 0x5f, 0xcc, 0x45, 0x76, 0xc8, 0x96, 0xce, 0x1c, 0x3a, 0x0e, 0x77, 0xed, 0xd8, 0xd2,
+0x96, 0xac, 0x77, 0x30, 0xe1, 0xef, 0xb0, 0x33, 0xf0, 0x6e, 0x3d, 0xce, 0x5e, 0x6d, 0xde,
+0x8a, 0xdc, 0x9b, 0x91, 0x63, 0x2a, 0x95, 0x20, 0x0d, 0xfd, 0x78, 0xba, 0xcb, 0x15, 0x43,
+0xc9, 0x20, 0x96, 0x83, 0x06, 0xd9, 0x11, 0xf3, 0xe2, 0x13, 0xcf, 0x9c, 0x91, 0x7f, 0x33,
+0x46, 0xa7, 0xe2, 0xd3, 0x75, 0xff, 0x4f, 0x0c, 0x0c, 0xaf, 0xcd, 0xa6, 0x9c, 0xa6, 0x73,
+0xe2, 0x6d, 0x17, 0x16, 0xb5, 0x99, 0x80, 0x35, 0xd9, 0x61, 0xf3, 0x48, 0x23, 0xff, 0xae,
+0x53, 0x89, 0xfa, 0x55, 0x1c, 0x37, 0xa5, 0xe8, 0x62, 0x12, 0xb2, 0x22, 0x04, 0xed, 0x42,
+0xb6, 0x65, 0xc4, 0x41, 0x42, 0x72, 0xca, 0x7e, 0x5e, 0x2f, 0x69, 0x46, 0xef, 0xbd, 0x7e,
+0xdf, 0x35, 0x1e, 0x5b, 0x77, 0xaf, 0x8d, 0x39, 0xf8, 0xa7, 0xd8, 0x31, 0x00, 0xd3, 0x85,
+0x66, 0xd5, 0xcd, 0x59, 0xd6, 0x5e, 0x9f, 0xb2, 0x3f, 0x09, 0xd1, 0xc4, 0x5b, 0x74, 0x62,
+0xd3, 0x30, 0x35, 0xf3, 0xe3, 0x7d, 0x7f, 0xab, 0x38, 0xc2, 0x33, 0x42, 0xd0, 0x67, 0xd0,
+0xf4, 0xcf, 0x97, 0xec, 0x35, 0x31, 0xfe, 0x94, 0x9c, 0xa1, 0x66, 0x91, 0xc8, 0x05, 0x45,
+0x19, 0x85, 0x0f, 0x4a, 0xb0, 0x3a, 0x20, 0x44, 0xa4, 0x6b, 0x33, 0x0c, 0xa6, 0xb4, 0x4c,
+0x46, 0x30, 0x15, 0x2d, 0xbb, 0x04, 0x3c, 0x9d, 0x48, 0xf6, 0x84, 0x9a, 0x62, 0x07, 0xe9,
+0x6c, 0x8f, 0xde, 0x29, 0x28, 0x5a, 0x17, 0xec, 0x56, 0xf3, 0xc4, 0xe0, 0x86, 0x2f, 0xb5,
+0x1c, 0x8f, 0xaa, 0xc6, 0xc0, 0xcf, 0x0d, 0xcf, 0x1d, 0x4f, 0xb2, 0xbf, 0x26, 0x5c, 0x7c,
+0x8d, 0xd3, 0xe4, 0x56, 0xd1, 0xe8, 0x90, 0x94, 0x6a, 0xba, 0x27, 0xba, 0xf7, 0xba, 0x39,
+0xc8, 0x08, 0x03, 0x25, 0x7f, 0x16, 0x8f, 0x61, 0xbf, 0xdf, 0x45, 0x88, 0x7d, 0x90, 0x80,
+0x55, 0x58, 0x72, 0x4f, 0xf8, 0xd0, 0x94, 0xbb, 0x55, 0x2a, 0x47, 0x4f, 0xaa, 0x87, 0x2d,
+0xd4, 0xe7, 0xaf, 0x08, 0x33, 0xc9, 0xec, 0x0b, 0x5b, 0xb8, 0x53, 0x27, 0x2e, 0xfb, 0xad,
+0x69, 0xb6, 0x53, 0x64, 0x48, 0x13, 0x41, 0xf8, 0x02, 0x06, 0x6f, 0xb8, 0xcc, 0x64, 0xec,
+0x65, 0x65, 0x7e, 0xdf, 0x3f, 0x1e, 0xe1, 0xee, 0xde, 0x3c, 0x1a, 0xe8, 0x0f, 0xf0, 0x2c,
+0xea, 0x6e, 0x52, 0x77, 0x34, 0x41, 0xa1, 0xcc, 0x72, 0x8f, 0x6e, 0x9c, 0x3b, 0x8d, 0x39,
+0xdf, 0xd4, 0x08, 0x24, 0xba, 0x36, 0xc7, 0x09, 0xf2, 0xf1, 0xa2, 0xd1, 0xe0, 0xa3, 0x6a,
+0x5c, 0xc7, 0xb2, 0x0d, 0x1c, 0xfb, 0x5f, 0xc8, 0x86, 0xd8, 0x3e, 0x1c, 0xb7, 0x1f, 0x2d,
+0xd8, 0xf2, 0xcd, 0x52, 0xeb, 0xde, 0x50, 0x14, 0xb7, 0xc7, 0xa2, 0x8b, 0x78, 0x70, 0x11,
+0x87, 0x1a, 0xc5, 0xb8, 0xe5, 0x5e, 0xa5, 0xc9, 0x94, 0x22, 0x66, 0x7b, 0x8b, 0x74, 0xab,
+0x85, 0x28, 0x95, 0x90, 0x6e, 0x07, 0xdd, 0x79, 0x57, 0xb3, 0x75, 0xc8, 0x18, 0x67, 0x39,
+0x06, 0x21, 0x55, 0xba, 0xba, 0xda, 0xf9, 0x3b, 0xe9, 0x5d, 0xc9, 0x1f, 0x6f, 0x61, 0x3b,
+0xc2, 0x7e, 0x3d, 0x07, 0xa6, 0x84, 0x91, 0xb7, 0x63, 0x7e, 0x5f, 0xfc, 0xd1, 0x7d, 0x08,
+0xdd, 0x79, 0x07, 0xe1, 0x9e, 0x11, 0x25, 0xe8, 0x10, 0x05, 0x66, 0xfa, 0xca, 0xc3, 0x41,
+0x01, 0x27, 0x54, 0xd2, 0x46, 0xae, 0xe3, 0xff, 0x43, 0xae, 0x8d, 0x0e, 0x31, 0x13, 0x1f,
+0x95, 0x79, 0x82, 0x86, 0x7e, 0xfb, 0xd4, 0x17, 0x57, 0xb8, 0x25, 0xe7, 0x1d, 0x18, 0x8f,
+0x06, 0x1a, 0xe5, 0xef, 0x55, 0x28, 0x72, 0x42, 0xae, 0xdf, 0x9e, 0xbb, 0x14, 0xab, 0xd8,
+0x36, 0x4f, 0x46, 0x4b, 0x35, 0x92, 0x64, 0x6d, 0xbb, 0x60, 0xc2, 0x0b, 0x6f, 0x57, 0x5e,
+0x3a, 0x8f, 0x3d, 0xcb, 0xe5, 0xda, 0x6c, 0x5c, 0x85, 0x8f, 0x9d, 0xa6, 0x7e, 0x1e, 0x49,
+0x1a, 0xcc, 0xc9, 0xec, 0x04, 0xab, 0x35, 0xf2, 0x9b, 0xe7, 0xb3, 0x52, 0xb1, 0x1c, 0xc1,
+0xfe, 0x5c, 0x0b, 0xf5, 0x72, 0x0b, 0xec, 0x8e, 0xcd, 0x67, 0x98, 0xbf, 0xa5, 0x28, 0xca,
+0x48, 0x9b, 0x60, 0x1c, 0xee, 0x00, 0xde, 0x01, 0xbc, 0xa4, 0x02, 0xd2, 0x19, 0xb6, 0x05,
+0xd6, 0x52, 0x78, 0xdb, 0x20, 0xbd, 0x3f, 0x95, 0x97, 0xb1, 0x59, 0x3d, 0x9d, 0x83, 0xc2,
+0xfd, 0x23, 0xa5, 0xfd, 0xd8, 0x20, 0x92, 0x27, 0xee, 0x3c, 0xe9, 0x5a, 0x61, 0x11, 0xe1,
+0x31, 0xb4, 0x4c, 0xb4, 0xa9, 0xe2, 0x6d, 0x2e, 0xae, 0x5f, 0x37, 0x8e, 0x07, 0xfd, 0xed,
+0x85, 0x07, 0x79, 0x43, 0x7e, 0xfa, 0xd6, 0x03, 0xe8, 0x5b, 0x65, 0x2a, 0xe4, 0xf9, 0x36,
+0x9e, 0xff, 0x53, 0x6d, 0x51, 0x50, 0x61, 0x72, 0x18, 0xcd, 0x3d, 0xe4, 0xb6, 0x27, 0x10,
+0x4a, 0xdd, 0xfd, 0xa3, 0x36, 0x67, 0xac, 0xc7, 0x85, 0x1c, 0xd3, 0xe7, 0x17, 0x74, 0xe2,
+0x8e, 0xee, 0xa6, 0xf4, 0xb6, 0x86, 0x24, 0xcf, 0x40, 0xdf, 0x35, 0x08, 0x0f, 0x55, 0xdd,
+0x51, 0xe9, 0x7c, 0x39, 0x78, 0x5c, 0xdf, 0x20, 0x2a, 0xeb, 0xed, 0x35, 0x10, 0x26, 0x98,
+0x77, 0x69, 0x4e, 0x51, 0x7a, 0xb2, 0x9f, 0x1d, 0xbc, 0x06, 0xcd, 0xcf, 0x4d, 0xb9, 0xfa,
+0xb7, 0xaf, 0x6a, 0x07, 0x0c, 0x96, 0x42, 0x57, 0x6c, 0x3d, 0xa5, 0xfe, 0x91, 0xe3, 0x76,
+0x9f, 0xdd, 0x3c, 0x83, 0x25, 0xab, 0x24, 0x89, 0x47, 0x7c, 0xba, 0xd7, 0x7d, 0x72, 0x90,
+0x80, 0xb0, 0x03, 0xa4, 0xef, 0x04, 0x0a, 0x9e, 0x5a, 0x14, 0x1c, 0xab, 0x75, 0x47, 0x05,
+0xcb, 0xa2, 0x97, 0x0d, 0x6a, 0xa5, 0x7c, 0xa4, 0x40, 0x90, 0xe2, 0x6c, 0xfa, 0xd4, 0xbd,
+0x69, 0xd0, 0x06, 0x53, 0x67, 0xfa, 0xe7, 0xcc, 0x06, 0x42, 0x45, 0xbe, 0xbd, 0x6f, 0x3e,
+0x48, 0x70, 0xf5, 0x2b, 0x83, 0xc7, 0xba, 0x54, 0x9c, 0xab, 0x54, 0x1f, 0x81, 0xe2, 0x11,
+0x82, 0x51, 0x02, 0x51, 0x63, 0x13, 0x86, 0x38, 0xb1, 0x56, 0x0c, 0x4d, 0x68, 0xf3, 0x53,
+0x1d, 0xfb, 0xe3, 0x15, 0xe8, 0x42, 0xf3, 0x27, 0x9b, 0xa5, 0x4a, 0x86, 0x90, 0xe1, 0x17,
+0xdc, 0x99, 0xe2, 0x5c, 0x79, 0xc6, 0x5f, 0x7e, 0x33, 0xc0, 0x41, 0xb6, 0x9e, 0xfc, 0x10,
+0x8a, 0xf4, 0xfd, 0xe9, 0xd2, 0x52, 0x53, 0x54, 0x89, 0x04, 0xbd, 0x69, 0xd2, 0x54, 0x32,
+0x96, 0xec, 0x44, 0x08, 0xc3, 0x86, 0x10, 0xd1, 0x3e, 0x32, 0xb5, 0x4f, 0x52, 0x49, 0x58,
+0x49, 0xf2, 0x8d, 0x83, 0x89, 0xf3, 0x24, 0x83, 0x65, 0x72, 0x53, 0xaf, 0x2d, 0x90, 0x61,
+0x99, 0x92, 0x31, 0x75, 0x93, 0x46, 0xe5, 0xd3, 0x48, 0x11, 0x01, 0xc9, 0x10, 0x98, 0x66,
+0x86, 0x79, 0x19, 0x73, 0x7d, 0xda, 0xa1, 0xb0, 0x41, 0x9e, 0xcd, 0xdc, 0xc2, 0x66, 0x86,
+0xdd, 0xb8, 0xc9, 0xe3, 0xe7, 0x80, 0x96, 0xf5, 0x38, 0x72, 0xa5, 0xda, 0xe5, 0x38, 0x13,
+0x57, 0x2b, 0xbd, 0x32, 0xc7, 0x44, 0xe0, 0xe3, 0x2d, 0xed, 0x54, 0x40, 0x74, 0x9d, 0x02,
+0x55, 0x38, 0x45, 0x89, 0x6f, 0x14, 0x40, 0xf6, 0x7b, 0x41, 0x1e, 0x04, 0xdb, 0xa4, 0xd9,
+0xf3, 0x90, 0xae, 0x10, 0xc9, 0xc3, 0x72, 0x5d, 0x0d, 0x01, 0x51, 0xf1, 0xd1, 0x96, 0x43,
+0xc6, 0x1a, 0x98, 0x3d, 0xbd, 0xcd, 0xdf, 0x44, 0x82, 0xd0, 0x17, 0xa2, 0x9e, 0x6c, 0x0c,
+0x2f, 0x46, 0xeb, 0xd8, 0x4a, 0xce, 0xfe, 0xbe, 0xcd, 0xf9, 0xd4, 0xe3, 0x36, 0xf3, 0xd8,
+0x1c, 0x00, 0x24, 0xf2, 0xac, 0x03, 0x11, 0xb6, 0x18, 0x8f, 0x9c, 0xba, 0xf6, 0x4f, 0xfd,
+0x78, 0x72, 0x83, 0xbf, 0x3e, 0x5c, 0x24, 0xf9, 0x4d, 0xea, 0x85, 0x74, 0x25, 0xe3, 0x46,
+0x7b, 0x5e, 0xfe, 0xbd, 0xbf, 0x5e, 0x68, 0x51, 0xe5, 0x53, 0x85, 0x9a, 0x03, 0x4c, 0x09,
+0xf0, 0x6b, 0xc2, 0x97, 0xfc, 0xcc, 0x96, 0x2c, 0xaf, 0xf7, 0x8c, 0x26, 0xd8, 0xc7, 0xfc,
+0xda, 0x1f, 0x0e, 0x0f, 0x39, 0x1a, 0xb2, 0x0a, 0x98, 0x1a, 0x15, 0xdc, 0x3e, 0x4b, 0x9e,
+0x9d, 0x40, 0x3e, 0x71, 0x5b, 0x66, 0xc3, 0x88, 0xf8, 0x57, 0x14, 0x06, 0xc7, 0x2c, 0xcd,
+0x31, 0x8e, 0x1e, 0x88, 0x79, 0x9f, 0x33, 0x94, 0xea, 0x21, 0x08, 0x0d, 0x35, 0x7d, 0xa2,
+0x57, 0x46, 0xe3, 0x0f, 0xb9, 0xa9, 0xbc, 0xd2, 0x06, 0xb8, 0xfa, 0xf9, 0xb0, 0xf3, 0xc3,
+0x8a, 0x38, 0x82, 0x06, 0x7f, 0xd9, 0xce, 0x92, 0xa2, 0x9e, 0xfc, 0x2a, 0xc8, 0x51, 0xb7,
+0x7d, 0xdb, 0x47, 0x37, 0xaf, 0x8b, 0xb8, 0x6d, 0x70, 0x21, 0x02, 0x63, 0x5e, 0xbd, 0x38,
+0xf1, 0xe1, 0x9f, 0xe3, 0xe2, 0x79, 0x3b, 0x42, 0x05, 0xe2, 0xc6, 0x13, 0x7a, 0xe2, 0x91,
+0x73, 0xe2, 0x79, 0x8b, 0x2f, 0x7f, 0x88, 0x02, 0x06, 0x4e, 0xb8, 0x66, 0xb8, 0xc0, 0xc4,
+0x3b, 0x1c, 0x3e, 0x96, 0x0f, 0xbb, 0x7f, 0xe8, 0x85, 0x5b, 0xb2, 0xf6, 0xa7, 0x48, 0x5b,
+0x95, 0x83, 0x57, 0xe0, 0xe8, 0x22, 0x67, 0x07, 0x3c, 0x27, 0x65, 0x66, 0xe8, 0x84, 0xab,
+0xea, 0xf5, 0xb5, 0x00, 0xec, 0xa4, 0xa3, 0xe8, 0x25, 0x77, 0xd1, 0x81, 0x9c, 0x87, 0xd3,
+0x1a, 0x31, 0x58, 0xa4, 0x0a, 0xa8, 0x71, 0x9c, 0x52, 0x88, 0x4d, 0x50, 0xff, 0xdb, 0x41,
+0x81, 0x04, 0xc3, 0x84, 0xaa, 0x72, 0x79, 0x2f, 0x9b, 0x2d, 0x2f, 0x1c, 0xa5, 0x6b, 0x68,
+0x9b, 0x3b, 0x6b, 0x1c, 0x67, 0xeb, 0x42, 0xe0, 0xe3, 0x2c, 0x7b, 0x52, 0x8e, 0xc1, 0x7e,
+0xd8, 0xab, 0x02, 0x46, 0xd1, 0x83, 0x38, 0x1a, 0x18, 0xad, 0x90, 0x7f, 0xdb, 0x22, 0xc1,
+0x80, 0xea, 0xf7, 0x67, 0x1d, 0xa7, 0xb2, 0x40, 0xdb, 0xc3, 0xc4, 0xd5, 0x8b, 0x49, 0xf8,
+0xdc, 0x25, 0x80, 0x7e, 0xfa, 0x64, 0xac, 0x36, 0x4d, 0x74, 0x6f, 0x3e, 0x57, 0x23, 0xb4,
+0x49, 0x7c, 0x6f, 0x3e, 0x7c, 0xa7, 0x34, 0xb7, 0x6b, 0x66, 0xf8, 0xd1, 0x69, 0x6d, 0x83,
+0xc5, 0x8a, 0xe2, 0x42, 0x3f, 0x8b, 0x5e, 0x5a, 0xd5, 0xcd, 0x47, 0x64, 0xeb, 0x4e, 0xef,
+0x62, 0x19, 0x37, 0xd3, 0x8e, 0x68, 0x51, 0x4a, 0x96, 0xbb, 0x5b, 0xa0, 0x34, 0xd8, 0xb4,
+0xf4, 0xb0, 0x99, 0x53, 0xb1, 0x70, 0xc3, 0x1d, 0x6e, 0x2b, 0x03, 0x76, 0xc9, 0x00, 0x0b,
+0x10, 0xca, 0xb7, 0xf3, 0xbe, 0x4b, 0xe2, 0xb4, 0x6c, 0x4a, 0x9f, 0x59, 0x39, 0x30, 0xc7,
+0xc3, 0x88, 0x38, 0x63, 0xc4, 0xcf, 0xd1, 0xfd, 0xf0, 0x6d, 0xfe, 0x68, 0x92, 0x98, 0x11,
+0x7d, 0x90, 0x0c, 0x64, 0x23, 0xe8, 0x25, 0x77, 0xd1, 0x81, 0x75, 0xa4, 0xf4, 0x35, 0x6f,
+0xe4, 0x9c, 0x7a, 0x48, 0xd0, 0xde, 0x37, 0x42, 0xf8, 0x5b, 0xe9, 0x16, 0xba, 0x16, 0x4b,
+0x7c, 0xdb, 0x2c, 0x0e, 0xa0, 0xbc, 0x5c, 0x82, 0x71, 0xa0, 0x9d, 0x3a, 0x0a, 0x7e, 0xd0,
+0xdc, 0x93, 0x79, 0xf6, 0x78, 0xb5, 0x89, 0xd9, 0x70, 0x5d, 0xe0, 0x9d, 0xe7, 0xea, 0xee,
+0x88, 0x52, 0x18, 0x11, 0x7d, 0xf1, 0xce, 0xc1, 0x69, 0x8d, 0x3f, 0xea, 0x51, 0xc1, 0x49,
+0xb1, 0xc4, 0xa6, 0xf0, 0xdc, 0xbd, 0x61, 0xb7, 0x2c, 0x85, 0x4a, 0xcb, 0xdd, 0x96, 0x50,
+0x8b, 0x68, 0xf7, 0x7e, 0xb9, 0x1c, 0x19, 0xfb, 0x5c, 0x79, 0xf8, 0x7d, 0xe9, 0xf3, 0x0e,
+0xc7, 0x6e, 0x1c, 0x67, 0xb4, 0xb7, 0x4a, 0xc5, 0xbe, 0x3c, 0x8c, 0x94, 0x36, 0x02, 0x8f,
+0x81, 0x57, 0xe7, 0x4b, 0xd6, 0x2b, 0x10, 0xbe, 0x3c, 0x97, 0xbb, 0x41, 0x88, 0x6f, 0x13,
+0xe6, 0x27, 0x13, 0x4b, 0xd5, 0x44, 0xa9, 0xd9, 0x2d, 0xcd, 0x51, 0x91, 0x03, 0x14, 0xd5,
+0x6b, 0x3d, 0xb5, 0x98, 0xf0, 0x09, 0xaa, 0x42, 0x8e, 0x82, 0xe8, 0xf1, 0x36, 0xec, 0xb5,
+0x48, 0x5f, 0x9f, 0xca, 0x16, 0x5a, 0x3f, 0x4d, 0xbb, 0xa6, 0xd4, 0x08, 0x1a, 0xfb, 0xe5,
+0xeb, 0x40, 0x04, 0xe8, 0x40, 0x84, 0xc4, 0x8e, 0x74, 0xae, 0x47, 0x4d, 0xfc, 0xb5, 0x91,
+0xe2, 0x33, 0xf2, 0xf7, 0xae, 0xcd, 0x10, 0x47, 0xb1, 0x4b, 0xe2, 0xa2, 0x8d, 0x7c, 0x2c,
+0x32, 0x6f, 0xdd, 0xc4, 0xc2, 0xf1, 0x09, 0x56, 0x2d, 0x1e, 0x9d, 0x7d, 0x67, 0x32, 0x61,
+0x7f, 0x12, 0xe4, 0x3f, 0xfa, 0xe2, 0x7d, 0x7b, 0xd4, 0x67, 0x4e, 0x7f, 0x14, 0x6a, 0x6c,
+0x8e, 0x74, 0x9b, 0xbc, 0x3d, 0xc4, 0x70, 0xc4, 0x37, 0xd5, 0x60, 0xe0, 0x87, 0xbd, 0xb8,
+0x1a, 0x75, 0x9d, 0x7a, 0x80, 0xc1, 0xa9, 0x1f, 0xad, 0x7b, 0x27, 0xe5, 0x4c, 0xb0, 0x06,
+0xd0, 0xfb, 0x1c, 0x5a, 0xeb, 0xbd, 0x2e, 0x96, 0x49, 0x13, 0x43, 0x06, 0x8b, 0xcb, 0x6a,
+0xf0, 0x5d, 0x56, 0x6c, 0x4e, 0x18, 0x26, 0xd4, 0xc8, 0x53, 0x48, 0x70, 0xe2, 0x0f, 0x9c,
+0xa1, 0x35, 0x01, 0x96, 0xc7, 0x0b, 0xc9, 0x4b, 0xd3, 0x19, 0xe8, 0x5a, 0x75, 0xad, 0xc8,
+0x52, 0xce, 0x3c, 0x2e, 0xfd, 0x5f, 0x04, 0xcf, 0x9e, 0xd6, 0x33, 0xdb, 0x08, 0x34, 0xba,
+0x34, 0x9b, 0xf4, 0x25, 0xaa, 0x7f, 0x52, 0x37, 0x4f, 0x8b, 0x94, 0x95, 0x94, 0x2d, 0x88,
+0x10, 0xd1, 0x05, 0x07, 0xcf, 0xd4, 0x04, 0xdb, 0x95, 0xbe, 0x36, 0xd0, 0x1c, 0x1c, 0xa4,
+0x85, 0x0a, 0x02, 0x80, 0xde, 0xb1, 0x1b, 0x56, 0xaf, 0x51, 0x22, 0xa7, 0xa4, 0x4a, 0x2c,
+0x2f, 0x17, 0x7c, 0x13, 0x4c, 0x36, 0xad, 0x90, 0x8c, 0xea, 0xd4, 0x58, 0x3a, 0xca, 0xea,
+0x1d, 0x5c, 0x6c, 0x93, 0xad, 0x59, 0xed, 0xb1, 0x17, 0xa4, 0x22, 0x95, 0x67, 0xbe, 0xbb,
+0x25, 0xaf, 0x65, 0xc8, 0xe5, 0x90, 0xe1, 0x17, 0xdc, 0x7a, 0x47, 0xe9, 0x8f, 0xc3, 0xc3,
+0x5a, 0xdc, 0x20, 0x20, 0x4a, 0x09, 0xfc, 0x39, 0x51, 0x29, 0x31, 0xfb, 0xa0, 0x0a, 0x61,
+0x08, 0x9b, 0xb9, 0xb3, 0x6c, 0x95, 0xc5, 0x94, 0x00, 0x66, 0xf1, 0xb9, 0x79, 0x90, 0x7f,
+0x95, 0x5f, 0x55, 0xe1, 0x13, 0x6b, 0x87, 0xa8, 0x62, 0x21, 0x98, 0xf2, 0x57, 0x19, 0x92,
+0x10, 0xb3, 0x24, 0x81, 0x12, 0x21, 0xff, 0xd6, 0xf9, 0x73, 0x71, 0xc2, 0x62, 0x09, 0x31,
+0xeb, 0xe0, 0x7a, 0x35, 0x60, 0x8d, 0xc9, 0xb1, 0xe5, 0xa7, 0x8b, 0xca, 0xbc, 0x2d, 0xfa,
+0x63, 0xc7, 0x68, 0x1d, 0x19, 0xb5, 0x61, 0x78, 0xd0, 0x8b, 0xdb, 0xc0, 0x39, 0x22, 0x55,
+0x6a, 0x28, 0xc2, 0x52, 0x1e, 0x6b, 0xf7, 0x1d, 0xb6, 0xfa, 0x4f, 0xcf, 0x27, 0x7c, 0xaf,
+0x7f, 0x0c, 0x96, 0xba, 0xce, 0x2a, 0x54, 0x59, 0x5b, 0x20, 0xfb, 0x42, 0x87, 0x44, 0xd9,
+0x2e, 0x10, 0x43, 0xab, 0x58, 0x92, 0xb6, 0x8d, 0x78, 0xf3, 0xa3, 0xde, 0x0e, 0x07, 0x75,
+0x68, 0x52, 0x26, 0x3f, 0x3d, 0xec, 0xd0, 0x36, 0xdf, 0x1a, 0x16, 0x88, 0x5f, 0xbd, 0x1c,
+0x4d, 0x9e, 0x27, 0x4c, 0x12, 0x07, 0x0d, 0x2b, 0xb1, 0xdc, 0x00, 0x45, 0x54, 0x3d, 0xfc,
+0xcf, 0xfa, 0xc9, 0x06, 0x4b, 0x08, 0x64, 0xac, 0x8d, 0x17, 0x4d, 0xdf, 0x83, 0x24, 0xfb,
+0xf6, 0x9e, 0x5f, 0xf9, 0x0f, 0x8d, 0x07, 0x18, 0xb1, 0xb2, 0x37, 0xd2, 0x66, 0x9c, 0x82,
+0x09, 0x75, 0x52, 0x5b, 0x19, 0x74, 0x59, 0xa3, 0x64, 0x6d, 0x17, 0x93, 0x3a, 0x13, 0xd2,
+0xda, 0x97, 0xa4, 0x2b, 0x55, 0x7a, 0x32, 0xf9, 0x2f, 0x9b, 0xaa, 0x87, 0x6d, 0xce, 0x1d,
+0x07, 0x9a, 0x52, 0xfa, 0x40, 0xc5, 0x20, 0x43, 0xcc, 0xa8, 0xc3, 0x84, 0x2c, 0x44, 0x8b,
+0x44, 0x88, 0x62, 0xe7, 0x68, 0x4c, 0x2a, 0x69, 0xa7, 0xcf, 0x6f, 0x4d, 0x06, 0xed, 0x8a,
+0x8f, 0x9a, 0x62, 0xca, 0xed, 0xa5, 0x57, 0x18, 0x86, 0x9d, 0xe8, 0x7c, 0x14, 0xeb, 0x71,
+0xeb, 0xc0, 0xf4, 0x3a, 0x98, 0x11, 0x01, 0xc0, 0xa3, 0x53, 0xaf, 0x20, 0x7e, 0xde, 0x22,
+0x5c, 0x1f, 0x60, 0x8b, 0xb7, 0x5f, 0x74, 0x76, 0xd0, 0x87, 0xfa, 0x11, 0xd3, 0xa5, 0xba,
+0x5c, 0x82, 0xe1, 0x52, 0x54, 0x6b, 0x69, 0xeb, 0x31, 0x43, 0x01, 0x1a, 0x55, 0x7f, 0xdc,
+0x2f, 0xd8, 0x01, 0x26, 0x6f, 0x1c, 0x2d, 0x72, 0x7b, 0xc8, 0x93, 0x99, 0x2a, 0x08, 0xa8,
+0x6f, 0xb4, 0x28, 0x40, 0x8a, 0x8a, 0x4e, 0xd5, 0x3b, 0x39, 0x45, 0xa8, 0xe4, 0xe7, 0x73,
+0x8f, 0x00, 0x64, 0xd3, 0xc7, 0x87, 0xde, 0x43, 0x82, 0x2c, 0xe8, 0x57, 0x17, 0x29, 0xce,
+0xb8, 0x47, 0xd6, 0x08, 0x79, 0xd7, 0xc4, 0xe9, 0x23, 0x43, 0x9d, 0xb8, 0xcb, 0x78, 0x08,
+0x32, 0xf1, 0xec, 0x84, 0x80, 0x1e, 0xb9, 0x29, 0x12, 0x0c, 0x29, 0xcc, 0x9c, 0xd0, 0x10,
+0xa7, 0xd6, 0x8a, 0xe9, 0xf6, 0xfa, 0x8d, 0x7e, 0x95, 0x2e, 0x57, 0xcf, 0x8e, 0x38, 0x6b,
+0x35, 0xf0, 0xbc, 0xa6, 0x4e, 0x13, 0x7b, 0x41, 0x19, 0x15, 0x5d, 0x99, 0xbd, 0x22, 0x40,
+0x6a, 0x07, 0x2d, 0xd5, 0xd6, 0xff, 0x1d, 0x7b, 0xa6, 0xc4, 0xaa, 0x77, 0x44, 0x78, 0x2f,
+0x55, 0x9f, 0x7d, 0x53, 0xf0, 0x2b, 0x2b, 0xba, 0x36, 0xc2, 0xf8, 0x6d, 0xf0, 0x2b, 0xbb,
+0x6b, 0x97, 0x05, 0xb4, 0x4a, 0xc2, 0x86, 0x62, 0xb8, 0x76, 0xe7, 0xbb, 0xdf, 0x9c, 0x5a,
+0x70, 0x19, 0x95, 0x59, 0x15, 0xcf, 0xa6, 0xa9, 0x7a, 0x24, 0x4c, 0xc6, 0x65, 0xb9, 0xda,
+0x17, 0x6f, 0x2b, 0x55, 0x07, 0x32, 0x72, 0xd1, 0xee, 0x9c, 0x3a, 0x51, 0x98, 0x36, 0x37,
+0xf8, 0x61, 0xfc, 0x91, 0xbc, 0xcb, 0x34, 0xd8, 0x43, 0xa0, 0x7a, 0xea, 0xc4, 0x8a, 0x64,
+0x4d, 0xe0, 0x03, 0x93, 0xfb, 0xb4, 0xd8, 0x11, 0x21, 0x11, 0x66, 0x97, 0xb9, 0xba, 0x81,
+0x29, 0xc2, 0x8f, 0x8c, 0x14, 0x18, 0x22, 0x94, 0xc4, 0xb0, 0xf1, 0x10, 0xc4, 0x8b, 0x5d,
+0x8d, 0x7f, 0x14, 0xaf, 0x46, 0x19, 0x36, 0xa4, 0x36, 0x22, 0x18, 0x18, 0xe3, 0xab, 0x2c,
+0x91, 0x03, 0xf7, 0xc5, 0xf5, 0xf5, 0x59, 0xc2, 0xd2, 0xf7, 0xc7, 0x64, 0x54, 0x76, 0xfb,
+0x71, 0x70, 0xe8, 0xb2, 0x44, 0xa1, 0x2d, 0x59, 0x17, 0x02, 0xd6, 0x6f, 0x7a, 0xeb, 0xe0,
+0x53, 0x81, 0xf6, 0x5e, 0x7f, 0x37, 0xd4, 0x52, 0x13, 0x04, 0x44, 0xd5, 0xc8, 0xd3, 0xdd,
+0x6f, 0xd5, 0xfb, 0x71, 0x20, 0xe3, 0x0d, 0x0c, 0x47, 0x25, 0xa1, 0x41, 0xd2, 0xc7, 0xe5,
+0xc9, 0xd9, 0x27, 0xa5, 0x38, 0xe4, 0x30, 0xbb, 0x86, 0x07, 0x84, 0xef, 0x24, 0x9f, 0xf9,
+0x52, 0x74, 0xd2, 0x50, 0x73, 0xc4, 0x27, 0x73, 0x3b, 0x8d, 0x9c, 0xa6, 0xf6, 0x4b, 0x25,
+0x91, 0xc5, 0x9e, 0x1e, 0xb2, 0x78, 0x0c, 0x23, 0x80, 0xdd, 0xa3, 0x21, 0xf5, 0xa9, 0x9e,
+0x00, 0x16, 0x19, 0xbc, 0xd9, 0x55, 0x09, 0x90, 0xa2, 0xc6, 0xef, 0x3d, 0xf8, 0x72, 0x66,
+0x2f, 0xdc, 0x3a, 0xf6, 0x4f, 0xfd, 0x59, 0x30, 0xe2, 0x27, 0xcc, 0xfb, 0x55, 0x09, 0x71,
+0x41, 0xe1, 0x21, 0xa1, 0xa1, 0xc0, 0xe3, 0x25, 0xa9, 0xd0, 0x22, 0xc6, 0xef, 0x5c, 0x1b,
+0xb4, 0xea, 0x56, 0x2e, 0xbf, 0xfc, 0x5b, 0x34, 0xcb, 0x14, 0x8b, 0x94, 0xaa, 0xb7, 0xec,
+0x5a, 0x36, 0xcf, 0x1c, 0xba, 0xf6, 0x4d, 0xdb, 0x35, 0xf3 };

keyboards/oddball/config.h

@@ -0,0 +1,255 @@
+/*
+Copyright 2020 Alexander Tulloh
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xCA49
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Alexander Tulloh
+#define PRODUCT Oddball
+#define DESCRIPTION A ballin keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F6, B5, B6, F7 }
+#define MATRIX_COL_PINS { D6, D7, B4, D3, C6, C7 }
+#define UNUSED_PINS { B7, D4, D5, E6, F0, F1, F4, F5 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+#define USE_I2C
+#define SPLIT_USB_DETECT
+#define MASTER_RIGHT
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+#endif
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/oddball/info.json

@@ -0,0 +1,21 @@
+{
+    "keyboard_name": "Oddball",
+    "url": "https://atulloh.github.io/oddball",
+    "maintainer": "Alexander Tulloh",
+    "width": 14,
+    "height": 4.75,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"sw1", "x":0, "y":0.37}, {"label":"sw2", "x":1, "y":0.37}, {"label":"sw3", "x":2, "y":0.12}, {"label":"sw4", "x":3, "y":0}, {"label":"sw5", "x":4, "y":0.12}, {"label":"sw6", "x":5, "y":0.25},
+                {"label":"sw6", "x":8 , "y":0.25}, {"label":"sw5", "x":9 , "y":0.12}, {"label":"sw4", "x":10, "y":0}, {"label":"sw3", "x":11, "y":0.12}, {"label":"sw2", "x":12, "y":0.37}, {"label":"sw1", "x":13, "y":0.37},
+                {"label":"sw7", "x":0, "y":1.37}, {"label":"sw8", "x":1, "y":1.37}, {"label":"sw9", "x":2, "y":1.12}, {"label":"sw10", "x":3, "y":1}, {"label":"sw11", "x":4, "y":1.12}, {"label":"sw12", "x":5, "y":1.25},
+                {"label":"sw12", "x":8, "y":1.25}, {"label":"sw11", "x":9, "y":1.12}, {"label":"sw10", "x":10, "y":1}, {"label":"sw9", "x":11, "y":1.12}, {"label":"sw8", "x":12, "y":1.37}, {"label":"sw7", "x":13, "y":1.37},
+                {"label":"sw13", "x":0, "y":2.37}, {"label":"sw14", "x":1, "y":2.37}, {"label":"sw15", "x":2, "y":2.12}, {"label":"sw16", "x":3, "y":2}, {"label":"sw17", "x":4, "y":2.12}, {"label":"sw18", "x":5, "y":2.25},
+                {"label":"sw18", "x":8, "y":2.25}, {"label":"sw17", "x":9, "y":2.12}, {"label":"sw16", "x":10, "y":2}, {"label":"sw15", "x":11, "y":2.12}, {"label":"sw14", "x":12, "y":2.37}, {"label":"sw13", "x":13, "y":2.37},
+                {"label":"sw19", "x":4.5, "y":3.5, "h":1.25}, {"label":"sw20", "x":5.5, "y":3.5, "h":1.25},
+                {"label":"sw20", "x":7.5, "y":3.5, "h":1.25}, {"label":"sw19", "x":8.5, "y":3.5, "h":1.25}
+            ]
+        }
+    }
+}

keyboards/oddball/keymaps/default/keymap.c

@@ -0,0 +1,46 @@
+/* Copyright 2020 Alexander Tulloh
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+     KC_BSPC,   KC_Q,    KC_W,    KC_E,    KC_R,       KC_T,          KC_Y,     KC_U,     KC_I,    KC_O,    KC_P,    KC_TAB,
+     KC_LALT,   KC_A,    KC_S,    KC_D,    KC_F,       KC_G,          KC_H,     KC_J,     KC_K,    KC_L,    KC_SCLN, KC_SPC,
+     KC_LSFT,   KC_Z,    KC_X,    KC_C,    KC_V,       KC_B,          KC_N,     KC_M,     KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                                           MO(_LOWER), KC_LCTL,       _______,  MO(_RAISE)
+  ),
+
+  [_LOWER] = LAYOUT(
+     KC_DEL,    KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_BTN3,       KC_DQUO,  KC_7,    KC_8,    KC_9,    KC_ASTR, KC_UNDS,
+     _______,   KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_BTN2,       KC_QUOT,  KC_4,    KC_5,    KC_6,    KC_PLUS, KC_ENT,
+     _______,   KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_BTN1,       KC_0,     KC_1,    KC_2,    KC_3,    KC_MINS, _______,
+                                           _______, _______,       _______,  _______
+  ),
+
+  [_RAISE] = LAYOUT(
+     _______,   KC_ESC,  KC_F7,   KC_F9,   KC_F9,   KC_F10,        KC_PIPE,  KC_PGUP, KC_UP,   KC_PGDN, KC_GRAVE, _______,
+     _______,   KC_LGUI, KC_F4,   KC_F5,   KC_F6,   KC_F11,        KC_AMPR,  KC_LEFT, KC_DOWN, KC_RGHT, KC_TILD,  _______,
+     _______,   KC_INS,  KC_F1,   KC_F2,   KC_F3,   KC_F12,        KC_EQUAL, KC_HOME, _______, KC_END,  KC_BSLS,  _______,
+                                           _______, _______,       _______,  _______
+  )
+};

keyboards/oddball/oddball.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 Alexander Tulloh
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "oddball.h"

keyboards/oddball/oddball.h

@@ -0,0 +1,44 @@
+/* Copyright 2020 Alexander Tulloh
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05,   R00, R01, R02, R03, R04, R05, \
+    L10, L11, L12, L13, L14, L15,   R10, R11, R12, R13, R14, R15, \
+    L20, L21, L22, L23, L24, L25,   R20, R21, R22, R23, R24, R25, \
+                        LT1, LT2,   RT1, RT2 \
+    ) \
+    { \
+        { L00, L01, L02, L03, L04, L05 }, \
+        { L10, L11, L12, L13, L14, L15 }, \
+        { L20, L21, L22, L23, L24, L25 }, \
+        { KC_NO, KC_NO, KC_NO, KC_NO, LT1, LT2 }, \
+        { R05, R04, R03, R02, R01, R00 }, \
+        { R15, R14, R13, R12, R11, R10 }, \
+        { R25, R24, R23, R22, R21, R20 }, \
+        { KC_NO, KC_NO, KC_NO, KC_NO, RT2, RT1 } \
+    }

keyboards/oddball/readme.md

@@ -0,0 +1,13 @@
+# Oddball
+
+A split keyboard with trackball support.
+
+* Keyboard Maintainer: [Alexander Tulloh](https://github.com/atulloh)
+* Hardware Supported: Oddball PCB and plates, and using an [ADNS9800 and breakout board for mouse](https://www.tindie.com/products/jkicklighter/adns-9800-laser-motion-sensor/)
+* Hardware Availability: [atulloh.github.io/oddball](https://atulloh.github.io/oddball)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make oddball:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/oddball/rules.mk

@@ -0,0 +1,39 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = halfkay
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+DEBOUNCE_TYPE = eager_pk
+SPLIT_KEYBOARD = yes
+
+# Add trackball support
+POINTING_DEVICE_ENABLE = yes
+SRC += adns.c

keyboards/redox_w/keymaps/danielo515/config.h

@@ -0,0 +1,6 @@
+#pragma once
+
+#define IGNORE_MOD_TAP_INTERRUPT
+#define TAPPING_TERM 200
+#undef ONESHOT_TIMEOUT
+#define ONESHOT_TIMEOUT 1500

keyboards/redox_w/keymaps/danielo515/keymap.c

@@ -0,0 +1,159 @@
+#include QMK_KEYBOARD_H
+#include "danielo515.h"
+
+// Shortcut to make keymap more readable
+# define SYM_L   OSL(_SYMB)
+
+# define KC_ALAS LALT_T(KC_PAST) // alt or keypad *
+# define KC_CTPL LCTL_T(KC_BSLS) // <C-\>
+
+# define KC_NAGR LT(_NAV, KC_GRV)
+# define KC_NAMI LT(_NAV, KC_MINS)
+# define AD_ESC LT(_ADJUST, KC_ESC)
+# define NAV_SPC LT(_NAV, KC_SPACE)
+
+# define KC_ADPU LT(_ADJUST, KC_PGUP)
+# define WIN_LEFT WIN_TO_LEFT
+# define WIN_RIGHT WIN_TO_RIGHT
+# define COPY_CUT TD(COPY_CUT)
+# define TD_PASTE TD(PASTE_DANCE)
+# define CTL OSM(MOD_LCTL)
+# define ALT OSM(MOD_LALT)
+# define GUI OSM(MOD_LGUI)
+# define ENT_SYM LT(_SYMB, KC_ENT)
+# define __S LT(_S,KC_S)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+	 KC_NAGR ,KC_1    ,KC_2    ,KC_3    ,KC_4    ,KC_5    ,                                            KC_6    ,KC_7    ,KC_8    ,KC_9    ,KC_0    ,KC_DQUO ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 KC_TAB  ,KC_Q    ,KC_W    ,KC_E    ,KC_R    ,KC_T    ,TD_PASTE,                          ALT_TAB ,KC_Y    ,KC_U    ,KC_I    ,KC_O    ,KC_P    ,SFT_MINS,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 SHIFT   ,KC_A    ,__S     ,FN_D    ,FN_F    ,KC_G    ,COPY_CUT,                          KC_UNDS ,HYPR_H  ,ALT_J   ,CTL_K   ,KC_L    ,TD_CLN  ,CMD_QUOT,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 KC_BSLS ,KC_Z    ,KC_X    ,KC_C    ,KC_V    ,KC_B    ,KC_DEL  ,KC_PGDN ,        ALT_TAB ,AD_ESC  ,KC_N    ,KC_M    ,KC_COMM ,KC_DOT  ,KC_SLSH ,KC_ASTR ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+	 CTL     ,ALT     ,KC_LEFT ,KC_RIGHT,     GUI     ,    SHIFT   ,KC_BSPC ,        KC_LEAD ,NAV_SPC ,    ENT_SYM,     KC_LBRC ,KC_RBRC ,KC_DOWN ,KC_UP
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+
+  [_SYMB] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+	 _______ ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,                                            KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,KC_F11  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 _______ ,KC_EXLM ,KC_DLR   ,KC_LCBR ,KC_RCBR ,KC_PIPE ,_______ ,                         _______ ,KC_PSLS ,KC_P7 	,KC_P8 	 ,KC_P9   ,KC_PERC ,KC_PMNS ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 _______ ,KC_AT   ,KC_DLR  , KC_LPRN, KC_RPRN,KC_GRV  ,_______ ,                          _______ ,KC_PAST ,KC_P4 	,KC_P5   ,KC_P6   ,KC_PPLS ,KC_BSPC ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 _______ ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,_______ ,_______ ,        _______ ,_______ ,KC_COLN ,KC_P1 	,KC_P2   ,KC_P3   ,KC_PENT ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+	 _______ ,_______ ,_______ ,_______ ,     _______ ,    _______ ,_______ ,        _______ ,_______ ,    KC_P0   ,     KC_P0   ,KC_PDOT ,KC_PENT ,XXXXXXX
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+
+  [_NAV] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+	 _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,                                            _______ ,_______ ,_______ ,_______ ,_______ ,_______ ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,KC_MS_U ,XXXXXXX ,KC_WH_U ,XXXXXXX ,_______ ,                          _______ ,XXXXXXX,SFT_LEFT,SFT_RIGHT,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_WH_D ,XXXXXXX ,_______ ,                          _______ ,KC_LEFT ,KC_DOWN ,KC_UP   ,KC_RIGHT,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,_______ ,_______ ,        _______ ,XXXXXXX ,KC_HOME ,CTL_LEFT,CTL_RIGHT,XXXXXXX,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,     KC_BTN1 ,    KC_BTN2 ,_______ ,        _______ ,_______ ,    XXXXXXX ,     XXXXXXX ,XXXXXXX ,WIN_LEFT,WIN_RIGHT
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+  [_ADJUST] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                                            XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,RESET   ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,KC_F12  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,        KC_MUTE ,_______ ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,     XXXXXXX ,    XXXXXXX ,XXXXXXX ,        XXXXXXX ,XXXXXXX ,    XXXXXXX ,     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+[_F] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+	 XXXXXXX ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,                                            KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,KC_F11  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,ALL_WIN ,EXPOSE  ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,_______ ,XXXXXXX ,XXXXXXX ,                          XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,        XXXXXXX ,_______ ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,     XXXXXXX ,    XXXXXXX ,XXXXXXX ,        XXXXXXX ,_______ ,    XXXXXXX ,     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+  [_D] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+	 XXXXXXX ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,                                            KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,KC_F12  ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          _______ ,KC_PSLS ,KC_P7 	,KC_P8 	 ,KC_P9   ,KC_PERC ,KC_PMNS ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,_______ ,XXXXXXX ,XXXXXXX ,XXXXXXX ,                          _______ ,KC_PAST ,KC_P4 	,KC_P5   ,KC_P6   ,KC_PPLS ,KC_BSPC ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,        _______ ,_______ ,KC_COLN ,KC_P1 	,KC_P2   ,KC_P3   ,KC_PENT ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,     XXXXXXX ,    XXXXXXX ,_______ ,        _______ ,_______ ,    KC_P0   ,     KC_P0   ,KC_PDOT ,KC_PENT ,XXXXXXX
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  ),
+	[_S] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                                           ┌────────┬────────┬────────┬────────┬────────┬────────┐
+	 XXXXXXX ,KC_F1   ,KC_F2   ,KC_F3   ,KC_F4   ,KC_F5   ,                                            KC_F6   ,KC_F7   ,KC_F8   ,KC_F9   ,KC_F10  ,XXXXXXX ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐                         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,KC_LT   ,KC_GT   ,XXXXXXX ,XXXXXXX ,                          XXXXXXX ,KC_HASH ,KC_LCBR ,KC_RCBR ,KC_ASTR ,KC_PERC ,KC_DLR ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤                         ├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,_______ ,KC_EQL  ,F_ARROW ,KC_GRAVE,XXXXXXX ,                          XXXXXXX ,KC_AMPR ,KC_LPRN ,KC_RPRN ,CLN_EQ  ,KC_PLUS ,KC_PIPE ,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┐       ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,KC_CIRC ,KC_DLR  ,XXXXXXX ,XXXXXXX ,XXXXXXX ,        XXXXXXX ,XXXXXXX ,KC_EXLM ,KC_TILD ,KC_CIRC ,ARROW  ,KC_BSLASH,IARROW  ,
+  //├────────┼────────┼────────┼────────┼────┬───┴────┬───┼────────┼────────┤       ├────────┼────────┼───┬────┴───┬────┼────────┼────────┼────────┼────────┤
+	 XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX ,     XXXXXXX ,    XXXXXXX ,_______ ,        XXXXXXX ,_______ ,    XXXXXXX ,     XXXXXXX ,XXXXXXX ,XXXXXXX ,XXXXXXX
+  //└────────┴────────┴────────┴────────┘    └────────┘   └────────┴────────┘       └────────┴────────┘   └────────┘    └────────┴────────┴────────┴────────┘
+  )
+
+};
+
+void alt_tab_activated(void){
+    layer_on(_NAV);
+};
+void alt_tab_deactivated(void){
+    layer_off(_NAV);
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+	switch (get_highest_layer(state)) {
+		case _QWERTY:
+			set_led_off;
+			break;
+		case _SYMB:
+        case _D:
+			set_led_green;
+			break;
+		case _NAV:
+			set_led_blue;
+			break;
+		case _ADJUST:
+			set_led_red;
+			break;
+		case _S:
+			set_led_magenta;
+			break;
+		case _F:
+			set_led_white;
+			break;
+		default:
+			break;
+	}
+  return state;
+}
+
+

keyboards/redox_w/keymaps/danielo515/readme.md

@@ -0,0 +1,2 @@
+# Danielo keymap for Redox Wireless
+Most of the custom functionality is on my user-space `users/danielo515`

keyboards/redox_w/keymaps/danielo515/rules.mk

@@ -0,0 +1,6 @@
+
+TAP_DANCE_ENABLE = yes # Enable the tap dance feature.
+COMBO_ENABLE = yes
+LEADER_ENABLE = yes
+CONSOLE_ENABLE = no
+LTO_ENABLE = yes # link time optimizations

keyboards/thevankeyboards/bananasplit/keymaps/cijanzen/keymap.c

@@ -0,0 +1,22 @@
+#include QMK_KEYBOARD_H
+
+#define DEFAULT_LAYER   0
+#define HHKB_NAV_LAYER  1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [DEFAULT_LAYER] = LAYOUT_hhkb_arrow(
+    KC_ESC,  KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,  KC_9,  KC_0,  KC_MINS,  KC_EQL,  KC_BSLS, KC_GRV,
+    KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC, KC_BSPC,
+    KC_CAPS,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,  KC_QUOT,       KC_ENT,
+    KC_LSFT,      KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,  KC_DOT,  KC_SLSH,   KC_RSFT, MO(1),
+    KC_LCTL,    KC_LGUI,    KC_LALT,    KC_SPC,    KC_SPC,     KC_SPC,    KC_RALT,  KC_RGUI,   _______, KC_MENU, KC_RCTL
+  ),
+
+  [HHKB_NAV_LAYER] = LAYOUT_hhkb_arrow(
+    RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
+    _______,  _______,   _______,   _______,   _______,   _______,   _______,   _______,   KC_PSCR,   KC_SLCK,   KC_PAUS,   KC_UP, _______, KC_DEL,
+    _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   KC_HOME,   KC_PGUP, KC_LEFT,  KC_RGHT, KC_ENT,
+    _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   KC_END,  KC_PGDN,  KC_DOWN,  _______, _______,
+    _______,  _______,  _______, _______,      _______,      _______,  _______, _______,  _______, _______, _______
+  )
+};

keyboards/thevankeyboards/bananasplit/keymaps/cijanzen/readme.md

@@ -0,0 +1,35 @@
+# cijanzen's keymap for the Bananasplit
+## Layout Notes
+
+Split right shift and split backspace. Second layer follows HHKB layer 2 layout.
+
+Base layer:
+```
+-------------------------------------------------------------------------------------------
+| Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
+-------------------------------------------------------------------------------------------
+|  Tab  |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |Backspace|
+-------------------------------------------------------------------------------------------
+|   Caps  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+-------------------------------------------------------------------------------------------
+|    Shift    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  Shift  | Fn1 |
+-------------------------------------------------------------------------------------------
+| Ctrl  |  GUI  |  Alt  |               Space             |  Alt  |  GUI  |  App  | Ctrl  |
+-------------------------------------------------------------------------------------------
+```
+
+Fn1 layer:
+
+```
+-------------------------------------------------------------------------------------------
+|Reset| F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+-------------------------------------------------------------------------------------------
+|        |     |     |     |     |     |     |     |Pscr |Slck |Paus | Up  |     |   Del  |
+-------------------------------------------------------------------------------------------
+|         |     |     |     |     |     |     |     |Home |PgUp |Left |Right|    Enter    |
+-------------------------------------------------------------------------------------------
+|             |     |     |     |     |     |     |     |End  |PgDn |Down |         |     |
+-------------------------------------------------------------------------------------------
+|       |       |       |                                 |       |       |       |       |
+-------------------------------------------------------------------------------------------
+```

keyboards/tokyo60/config.h

@@ -1,15 +1,14 @@
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x5436 // "T6"
-#define PRODUCT_ID      0x6060
+#define PRODUCT_ID      0x6060 // Tokyo60
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Tokyo Keyboard
-#define PRODUCT         tokyo60
+#define PRODUCT         Tokyo60
-#define DESCRIPTION     q.m.k. keyboard firmware for tokyo60
+#define DESCRIPTION     q.m.k. keyboard firmware for Tokyo60
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -54,5 +53,3 @@
 /* For Production */
 #define QMK_ESC_OUTPUT F0 // usually COL
 #define QMK_ESC_INPUT D0 // usually ROW
-
-#endif

keyboards/tokyo60/info.json

@@ -1,12 +1,320 @@
 {
     "keyboard_name": "Tokyo60",
-    "url": "", 
+    "url": "https://tokyokeyboard.com/",
     "maintainer": "qmk",
     "width": 15,
     "height": 5,
     "layouts": {
         "LAYOUT_60_hhkb": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
+            "layout": [{
+                    "label": "Esc",
+                    "x": 0,
+                    "y": 0
+                },
+                {
+                    "label": "!",
+                    "x": 1,
+                    "y": 0
+                },
+                {
+                    "label": "@",
+                    "x": 2,
+                    "y": 0
+                },
+                {
+                    "label": "#",
+                    "x": 3,
+                    "y": 0
+                },
+                {
+                    "label": "$",
+                    "x": 4,
+                    "y": 0
+                },
+                {
+                    "label": "%",
+                    "x": 5,
+                    "y": 0
+                },
+                {
+                    "label": "^",
+                    "x": 6,
+                    "y": 0
+                },
+                {
+                    "label": "&",
+                    "x": 7,
+                    "y": 0
+                },
+                {
+                    "label": "*",
+                    "x": 8,
+                    "y": 0
+                },
+                {
+                    "label": "(",
+                    "x": 9,
+                    "y": 0
+                },
+                {
+                    "label": ")",
+                    "x": 10,
+                    "y": 0
+                },
+                {
+                    "label": "_",
+                    "x": 11,
+                    "y": 0
+                },
+                {
+                    "label": "+",
+                    "x": 12,
+                    "y": 0
+                },
+                {
+                    "label": "|",
+                    "x": 13,
+                    "y": 0
+                },
+                {
+                    "label": "~",
+                    "x": 14,
+                    "y": 0
+                },
+                {
+                    "label": "Tab",
+                    "x": 0,
+                    "y": 1,
+                    "w": 1.5
+                },
+                {
+                    "label": "Q",
+                    "x": 1.5,
+                    "y": 1
+                },
+                {
+                    "label": "W",
+                    "x": 2.5,
+                    "y": 1
+                },
+                {
+                    "label": "E",
+                    "x": 3.5,
+                    "y": 1
+                },
+                {
+                    "label": "R",
+                    "x": 4.5,
+                    "y": 1
+                },
+                {
+                    "label": "T",
+                    "x": 5.5,
+                    "y": 1
+                },
+                {
+                    "label": "Y",
+                    "x": 6.5,
+                    "y": 1
+                },
+                {
+                    "label": "U",
+                    "x": 7.5,
+                    "y": 1
+                },
+                {
+                    "label": "I",
+                    "x": 8.5,
+                    "y": 1
+                },
+                {
+                    "label": "O",
+                    "x": 9.5,
+                    "y": 1
+                },
+                {
+                    "label": "P",
+                    "x": 10.5,
+                    "y": 1
+                },
+                {
+                    "label": "{",
+                    "x": 11.5,
+                    "y": 1
+                },
+                {
+                    "label": "}",
+                    "x": 12.5,
+                    "y": 1
+                },
+                {
+                    "label": "Delete",
+                    "x": 13.5,
+                    "y": 1,
+                    "w": 1.5
+                },
+                {
+                    "label": "Control",
+                    "x": 0,
+                    "y": 2,
+                    "w": 1.75
+                },
+                {
+                    "label": "A",
+                    "x": 1.75,
+                    "y": 2
+                },
+                {
+                    "label": "S",
+                    "x": 2.75,
+                    "y": 2
+                },
+                {
+                    "label": "D",
+                    "x": 3.75,
+                    "y": 2
+                },
+                {
+                    "label": "F",
+                    "x": 4.75,
+                    "y": 2
+                },
+                {
+                    "label": "G",
+                    "x": 5.75,
+                    "y": 2
+                },
+                {
+                    "label": "H",
+                    "x": 6.75,
+                    "y": 2
+                },
+                {
+                    "label": "J",
+                    "x": 7.75,
+                    "y": 2
+                },
+                {
+                    "label": "K",
+                    "x": 8.75,
+                    "y": 2
+                },
+                {
+                    "label": "L",
+                    "x": 9.75,
+                    "y": 2
+                },
+                {
+                    "label": ":",
+                    "x": 10.75,
+                    "y": 2
+                },
+                {
+                    "label": "\"",
+                    "x": 11.75,
+                    "y": 2
+                },
+                {
+                    "label": "Enter",
+                    "x": 12.75,
+                    "y": 2,
+                    "w": 2.25
+                },
+                {
+                    "label": "Shift",
+                    "x": 0,
+                    "y": 3,
+                    "w": 2.25
+                },
+                {
+                    "label": "Z",
+                    "x": 2.25,
+                    "y": 3
+                },
+                {
+                    "label": "X",
+                    "x": 3.25,
+                    "y": 3
+                },
+                {
+                    "label": "C",
+                    "x": 4.25,
+                    "y": 3
+                },
+                {
+                    "label": "V",
+                    "x": 5.25,
+                    "y": 3
+                },
+                {
+                    "label": "B",
+                    "x": 6.25,
+                    "y": 3
+                },
+                {
+                    "label": "N",
+                    "x": 7.25,
+                    "y": 3
+                },
+                {
+                    "label": "M",
+                    "x": 8.25,
+                    "y": 3
+                },
+                {
+                    "label": "<",
+                    "x": 9.25,
+                    "y": 3
+                },
+                {
+                    "label": ">",
+                    "x": 10.25,
+                    "y": 3
+                },
+                {
+                    "label": "?",
+                    "x": 11.25,
+                    "y": 3
+                },
+                {
+                    "label": "Shift",
+                    "x": 12.25,
+                    "y": 3,
+                    "w": 1.75
+                },
+                {
+                    "label": "Fn",
+                    "x": 14,
+                    "y": 3
+                },
+                {
+                    "label": "Os",
+                    "x": 1.5,
+                    "y": 4
+                },
+                {
+                    "label": "Alt",
+                    "x": 2.5,
+                    "y": 4,
+                    "w": 1.5
+                },
+                {
+                    "x": 4,
+                    "y": 4,
+                    "w": 7
+                },
+                {
+                    "label": "Alt",
+                    "x": 11,
+                    "y": 4,
+                    "w": 1.5
+                },
+                {
+                    "label": "Os",
+                    "x": 12.5,
+                    "y": 4
+                }
+            ]
         }
     }
 }

keyboards/tokyo60/keymaps/via/keymap.c

@@ -0,0 +1,37 @@
+#include QMK_KEYBOARD_H
+
+#define BL 0
+#define FN 1
+/*
+ * Default HHKB Layout
+ */
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[BL] = LAYOUT_60_hhkb(
+        KC_ESC,    KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL, KC_BSLS, KC_GRV, \
+        KC_TAB,    KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P, KC_LBRC, KC_RBRC, KC_BSPC,      \
+        KC_LCTL,   KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT,       KC_ENT,      \
+        KC_LSFT,            KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M, KC_COMM,  KC_DOT, KC_SLSH,      KC_RSFT, MO(FN), \
+             KC_LALT, KC_LGUI,              KC_SPC,                         KC_RGUI, KC_RALT ),
+
+[FN]= LAYOUT_60_hhkb(
+       KC_PWR,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL, \
+       KC_CAPS, RGB_TOG, RGB_MOD, RGB_RMOD, BL_TOGG, BL_STEP, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS,   KC_UP, KC_TRNS, KC_TRNS,  \
+       KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,       KC_PENT,       \
+       KC_TRNS,       KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS,  KC_END, KC_PGDN, KC_DOWN,       KC_TRNS, KC_TRNS, \
+             KC_TRNS, KC_TRNS,                   KC_TRNS,                         KC_TRNS, KC_TRNS ),
+
+[2]= LAYOUT_60_hhkb(
+       _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,  _______,  _______,  _______,  _______,  _______, \
+       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______, _______,  \
+       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,       _______,       \
+       _______,       _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______,       _______, _______, \
+             _______, _______,                   _______,                         _______, _______ ),
+
+[3]= LAYOUT_60_hhkb(
+       _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,   _______,  _______,  _______,  _______,  _______,  _______, \
+       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______, _______,  \
+       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,       _______,       \
+       _______,       _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______,       _______, _______, \
+             _______, _______,                   _______,                         _______, _______ ),
+};

keyboards/tokyo60/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/tokyo60/readme.md

@@ -1,15 +1,15 @@
-# tokyo60
+# Tokyo60
 ​
-![tokyo60](http://tokyokeyboard.com/wp-content/uploads/2018/02/AI7B4543_copy_page_20180215141449-1200x800.jpg)
+![Tokyo60](http://tokyokeyboard.com/wp-content/uploads/2018/02/AI7B4543_copy_page_20180215141449-1200x800.jpg)
 ​
 Minimal hacker style mechanical keyboard designed in Tokyo. Full aluminum hi-pro construction with integrated top-plate. Cherry MX compatible. More Info at [Tokyo Keyboard](http://tokyokeyboard.com).
 ​
-Keyboard Maintainer: [Tokyo Keyboard](http://tokyokeyboard.com)  
+* Keyboard Maintainer: [Tokyo Keyboard](http://tokyokeyboard.com)
-Hardware Supported: tokyo60 rev1  
+* Hardware Supported: Tokyo60 Rev.1
-Hardware Availability: [Tokyo Keyboard](http://tokyokeyboard.com), [Massdrop](https://www.massdrop.com/buy/massdrop-x-tokyo-keyboard-tokyo60-keyboard-kit?mode=guest_open)   
+* Hardware Availability: [Drop](https://drop.com/buy/massdrop-x-tokyo-keyboard-tokyo60-keyboard-kit?mode=guest_open)
 ​
 Make example for this keyboard (after setting up your build environment):
 ​
     make tokyo60:default
 ​
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/tokyo60/rules.mk

@@ -14,7 +14,7 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = no       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/tokyo60/tokyo60.h

@@ -1,8 +1,9 @@
-#ifndef TOKYO60_H
+#pragma once
-#define TOKYO60_H
 
 #include "quantum.h"
 
+#define XXX KC_NO
+
 #define LAYOUT_60_hhkb( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K1D,\
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2D, \
@@ -12,9 +13,7 @@
 ) { \
     { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
     { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D }, \
-    { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+    { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
-    { KC_NO, K42, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, K4D }  \
+    { XXX, K42, K43, XXX, XXX, K46, XXX, XXX, XXX, XXX, XXX, K4B, K4C, K4D }  \
 }
-
-#endif

keyboards/wallaby/config.h

@@ -0,0 +1,252 @@
+/*
+Copyright 2020 Koichi Katano
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x5967
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Koichi Katano
+#define PRODUCT Wallaby
+#define DESCRIPTION A Tenkeyless PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 17
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B5, B4, B3, B2, B1, B0 }
+#define MATRIX_COL_PINS { D5, C7, C6, D4, D0, E6, F0, F1, F4, F5, F6, F7, D7, D6, D1, D2, D3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+#endif
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/wallaby/info.json

@@ -0,0 +1,101 @@
+{
+    "keyboard_name": "Wallaby",
+    "url": "https://github.com/kkatano/wallaby",
+    "maintainer": "Koichi Katano",
+    "width": 18.26,
+    "height": 6.47,
+    "layouts": {
+        "LAYOUT_tkl_ansi": {
+            "key_count": 87,
+            "layout": [
+                {"label":"1", "x":0, "y":0},
+                {"label":"2", "x":2, "y":0},
+                {"label":"3", "x":3, "y":0},
+                {"label":"4", "x":4, "y":0}, 
+                {"label":"5", "x":5, "y":0}, 
+                {"label":"6", "x":6.5, "y":0}, 
+                {"label":"7", "x":7.5, "y":0}, 
+                {"label":"8", "x":8.5, "y":0}, 
+                {"label":"9", "x":9.5, "y":0}, 
+                {"label":"10", "x":11, "y":0}, 
+                {"label":"11", "x":12, "y":0}, 
+                {"label":"12", "x":13, "y":0}, 
+                {"label":"13", "x":14, "y":0}, 
+                {"label":"14", "x":15.26, "y":0}, 
+                {"label":"15", "x":16.26, "y":0}, 
+                {"label":"16", "x":17.26, "y":0}, 
+                {"label":"17", "x":0, "y":1.47}, 
+                {"label":"18", "x":1, "y":1.47}, 
+                {"label":"19", "x":2, "y":1.47}, 
+                {"label":"20", "x":3, "y":1.47}, 
+                {"label":"21", "x":4, "y":1.47}, 
+                {"label":"22", "x":5, "y":1.47}, 
+                {"label":"23", "x":6, "y":1.47}, 
+                {"label":"24", "x":7, "y":1.47}, 
+                {"label":"25", "x":8, "y":1.47}, 
+                {"label":"26", "x":9, "y":1.47}, 
+                {"label":"27", "x":10, "y":1.47}, 
+                {"label":"28", "x":11, "y":1.47}, 
+                {"label":"29", "x":12, "y":1.47}, 
+                {"label":"30", "x":13, "y":1.47, "w":2}, 
+                {"label":"31", "x":15.26, "y":1.47}, 
+                {"label":"32", "x":16.26, "y":1.47}, 
+                {"label":"33", "x":17.26, "y":1.47}, 
+                {"label":"34", "x":0, "y":2.47, "w":1.5}, 
+                {"label":"35", "x":1.5, "y":2.47}, 
+                {"label":"36", "x":2.5, "y":2.47}, 
+                {"label":"37", "x":3.5, "y":2.47}, 
+                {"label":"38", "x":4.5, "y":2.47}, 
+                {"label":"39", "x":5.5, "y":2.47}, 
+                {"label":"40", "x":6.5, "y":2.47}, 
+                {"label":"41", "x":7.5, "y":2.47}, 
+                {"label":"42", "x":8.5, "y":2.47}, 
+                {"label":"43", "x":9.5, "y":2.47}, 
+                {"label":"44", "x":10.5, "y":2.47}, 
+                {"label":"45", "x":11.5, "y":2.47}, 
+                {"label":"46", "x":12.5, "y":2.47}, 
+                {"label":"47", "x":13.5, "y":2.47, "w":1.5}, 
+                {"label":"48", "x":15.26, "y":2.47}, 
+                {"label":"49", "x":16.26, "y":2.47}, 
+                {"label":"50", "x":17.26, "y":2.47}, 
+                {"label":"51", "x":0, "y":3.47, "w":1.75}, 
+                {"label":"52", "x":1.75, "y":3.47}, 
+                {"label":"53", "x":2.75, "y":3.47}, 
+                {"label":"54", "x":3.75, "y":3.47}, 
+                {"label":"55", "x":4.75, "y":3.47}, 
+                {"label":"56", "x":5.75, "y":3.47}, 
+                {"label":"57", "x":6.75, "y":3.47}, 
+                {"label":"58", "x":7.75, "y":3.47}, 
+                {"label":"59", "x":8.75, "y":3.47}, 
+                {"label":"60", "x":9.75, "y":3.47}, 
+                {"label":"61", "x":10.75, "y":3.47}, 
+                {"label":"62", "x":11.75, "y":3.47}, 
+                {"label":"63", "x":12.75, "y":3.47, "w":2.25}, 
+                {"label":"64", "x":0, "y":4.47, "w":2.25}, 
+                {"label":"65", "x":2.25, "y":4.47}, 
+                {"label":"66", "x":3.25, "y":4.47}, 
+                {"label":"67", "x":4.25, "y":4.47}, 
+                {"label":"68", "x":5.25, "y":4.47}, 
+                {"label":"69", "x":6.25, "y":4.47}, 
+                {"label":"70", "x":7.25, "y":4.47}, 
+                {"label":"71", "x":8.25, "y":4.47}, 
+                {"label":"72", "x":9.25, "y":4.47}, 
+                {"label":"73", "x":10.25, "y":4.47}, 
+                {"label":"74", "x":11.25, "y":4.47}, 
+                {"label":"75", "x":12.25, "y":4.47, "w":2.75}, 
+                {"label":"76", "x":16.26, "y":4.47}, 
+                {"label":"77", "x":0, "y":5.47, "w":1.25}, 
+                {"label":"78", "x":1.25, "y":5.47, "w":1.25}, 
+                {"label":"79", "x":2.5, "y":5.47, "w":1.25}, 
+                {"label":"80", "x":3.75, "y":5.47, "w":6.25}, 
+                {"label":"81", "x":10, "y":5.47, "w":1.25}, 
+                {"label":"82", "x":11.25, "y":5.47, "w":1.25}, 
+                {"label":"83", "x":12.5, "y":5.47, "w":1.25}, 
+                {"label":"84", "x":13.75, "y":5.47, "w":1.25}, 
+                {"label":"85", "x":15.26, "y":5.47}, 
+                {"label":"86", "x":16.26, "y":5.47}, 
+                {"label":"87", "x":17.26, "y":5.47}
+            ]
+        }
+    }
+}

keyboards/wallaby/keymaps/default/keymap.c

@@ -0,0 +1,27 @@
+/* Copyright 2020 Koichi Katano
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    LAYOUT_tkl_ansi(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,     KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,    KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,    KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,             KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,    KC_LEFT, KC_DOWN, KC_RGHT
+    )
+};

keyboards/wallaby/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for wallaby

keyboards/wallaby/readme.md

@@ -0,0 +1,13 @@
+# wallaby
+
+A Tenkeyless PCB for YMDK aluminium case compatible with Filco
+
+* Keyboard Maintainer: [Koichi Katano](https://github.com/kkatano)
+* Hardware Supported: Wallaby PCB
+* Hardware Availability: https://github.com/kkatano/wallaby
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wallaby:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/wallaby/rules.mk

@@ -0,0 +1,34 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+LAYOUTS = tkl_ansi

keyboards/wallaby/wallaby.c

@@ -0,0 +1,25 @@
+/* Copyright 2020 Koichi Katano
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "wallaby.h"
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(B6, led_state.caps_lock);
+        writePin(B7, led_state.scroll_lock);
+    }
+    return true;
+}

keyboards/wallaby/wallaby.h

@@ -0,0 +1,44 @@
+/* Copyright 2020 Koichi Katano
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_tkl_ansi( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C,      k0E, k0F, k0G, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D,                \
+    k40,      k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C,           k4F,      \
+    k50, k51, k52,                k56,                k5A, k5B, k5C, k5D, k5E, k5F, k5G  \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, KC_NO, k0E, k0F, k0G }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F, k2G }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, KC_NO, k3D, KC_NO, KC_NO, KC_NO }, \
+    { k40, KC_NO, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, KC_NO, KC_NO, k4F, KC_NO }, \
+    { k50, k51, k52, KC_NO, KC_NO, KC_NO, k56, KC_NO, KC_NO, KC_NO, k5A, k5B, k5C, k5D, k5E, k5F, k5G } \
+}

lib/python/qmk/cli/json2c.py

@@ -1,7 +1,6 @@
 """Generate a keymap.c from a configurator export.
 """
 import json
-from pathlib import Path
 
 from milc import cli
 
@@ -9,7 +8,7 @@ import qmk.keymap
 import qmk.path
 
 
-@cli.argument('-o', '--output', arg_only=True, type=Path, help='File to write to')
+@cli.argument('-o', '--output', arg_only=True, type=qmk.path.normpath, help='File to write to')
 @cli.argument('-q', '--quiet', arg_only=True, action='store_true', help="Quiet mode, only output error messages")
 @cli.argument('filename', arg_only=True, help='Configurator JSON file')
 @cli.subcommand('Creates a keymap.c from a QMK Configurator export.')

quantum/keymap_extras/keymap_spanish.h

@@ -13,61 +13,150 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef KEYMAP_SPANISH_H
+
-#define KEYMAP_SPANISH_H
+#pragma once
 
 #include "keymap.h"
 
-// Normal characters
+// clang-format off
-#define ES_OVRR KC_GRV
-#define ES_APOS KC_MINS
-#define ES_IEXL KC_EQL
 
-#define ES_GRV KC_LBRC
+/*
-#define ES_PLUS KC_RBRC
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │ º │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ ' │ ¡ │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ ` │ + │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │ A │ S │ D │ F │ G │ H │ J │ K │ L │ Ñ │ ´ │ Ç │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ < │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ - │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
+#define ES_MORD KC_GRV  // º
+#define ES_1    KC_1    // 1
+#define ES_2    KC_2    // 2
+#define ES_3    KC_3    // 3
+#define ES_4    KC_4    // 4
+#define ES_5    KC_5    // 5
+#define ES_6    KC_6    // 6
+#define ES_7    KC_7    // 7
+#define ES_8    KC_8    // 8
+#define ES_9    KC_9    // 9
+#define ES_0    KC_0    // 0
+#define ES_QUOT KC_MINS // '
+#define ES_IEXL KC_EQL  // ¡
+// Row 2
+#define ES_Q    KC_Q    // Q
+#define ES_W    KC_W    // W
+#define ES_E    KC_E    // E
+#define ES_R    KC_R    // R
+#define ES_T    KC_T    // T
+#define ES_Y    KC_Y    // Y
+#define ES_U    KC_U    // U
+#define ES_I    KC_I    // I
+#define ES_O    KC_O    // O
+#define ES_P    KC_P    // P
+#define ES_GRV  KC_LBRC // ` (dead)
+#define ES_PLUS KC_RBRC // +
+// Row 3
+#define ES_A    KC_A    // A
+#define ES_S    KC_S    // S
+#define ES_D    KC_D    // D
+#define ES_F    KC_F    // F
+#define ES_G    KC_G    // G
+#define ES_H    KC_H    // H
+#define ES_J    KC_J    // J
+#define ES_K    KC_K    // K
+#define ES_L    KC_L    // L
+#define ES_NTIL KC_SCLN // Ñ
+#define ES_ACUT KC_QUOT // ´ (dead)
+#define ES_CCED KC_NUHS // Ç
+// Row 4
+#define ES_LABK KC_NUBS // <
+#define ES_Z    KC_Z    // Z
+#define ES_X    KC_X    // X
+#define ES_C    KC_C    // C
+#define ES_V    KC_V    // V
+#define ES_B    KC_B    // B
+#define ES_N    KC_N    // N
+#define ES_M    KC_M    // M
+#define ES_COMM KC_COMM // ,
+#define ES_DOT  KC_DOT  // .
+#define ES_MINS KC_SLSH // -
 
-#define ES_NTIL KC_SCLN
+/* Shifted symbols
-#define ES_ACUT KC_QUOT
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
-#define ES_CCED KC_NUHS
+ * │ ª │ ! │ " │ · │ $ │ % │ & │ / │ ( │ ) │ = │ ? │ ¿ │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │   │   │   │   │   │   │   │   │   │   │ ^ │ * │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │   │   │   │   │   │   │   │   │   │   │ ¨ │   │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ > │   │   │   │   │   │   │   │ ; │ : │ _ │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
+#define ES_FORD S(ES_MORD) // ª
+#define ES_EXLM S(ES_1)    // !
+#define ES_DQUO S(ES_2)    // "
+#define ES_BULT S(ES_3)    // ·
+#define ES_DLR  S(ES_4)    // $
+#define ES_PERC S(ES_5)    // %
+#define ES_AMPR S(ES_6)    // &
+#define ES_SLSH S(ES_7)    // /
+#define ES_LPRN S(ES_8)    // (
+#define ES_RPRN S(ES_9)    // )
+#define ES_EQL  S(ES_0)    // =
+#define ES_QUES S(ES_QUOT) // ?
+#define ES_IQUE S(ES_IEXL) // ¿
+// Row 2
+#define ES_CIRC S(ES_GRV)  // ^ (dead)
+#define ES_ASTR S(ES_PLUS) // *
+// Row 3
+#define ES_DIAE S(ES_GRV)  // ¨ (dead)
+// Row 4
+#define ES_RABK S(ES_LABK) // >
+#define ES_SCLN S(KC_COMM) // ;
+#define ES_COLN S(KC_DOT)  // :
+#define ES_UNDS S(ES_MINS) // _
 
-#define ES_LESS KC_NUBS
+/* AltGr symbols
-#define ES_MINS KC_SLSH
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │ \ │ | │ @ │ # │ ~ │ € │ ¬ │   │   │   │   │   │   │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │   │   │   │   │   │   │   │   │   │   │ [ │ ] │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │   │   │   │   │   │   │   │   │   │   │ { │ } │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │   │   │   │   │   │   │   │   │   │   │   │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
+#define ES_BSLS ALGR(ES_MORD) // (backslash)
+#define ES_PIPE ALGR(ES_1)    // |
+#define ES_AT   ALGR(ES_2)    // @
+#define ES_HASH ALGR(ES_3)    // #
+#define ES_TILD ALGR(ES_4)    // ~
+#define ES_EURO ALGR(ES_5)    // €
+#define ES_NOT  ALGR(ES_6)    // ¬
+// Row 2
+#define ES_LBRC ALGR(ES_GRV)  // [
+#define ES_RBRC ALGR(ES_PLUS) // ]
+// Row 3
+#define ES_LCBR ALGR(ES_ACUT) // {
+#define ES_RCBR ALGR(ES_CCED) // }
 
-// Shifted characters
+// DEPRECATED
-#define ES_ASML LSFT(ES_OVRR)
+#define ES_OVRR ES_MORD
-#define ES_QUOT LSFT(KC_2)
+#define ES_APOS ES_QUOT
-#define ES_OVDT LSFT(KC_3)
+#define ES_LESS ES_LABK
-#define ES_AMPR LSFT(KC_6)
+#define ES_ASML ES_FORD
-#define ES_SLSH LSFT(KC_7)
+#define ES_OVDT ES_BULT
-#define ES_LPRN LSFT(KC_8)
+#define ES_UMLT ES_DIAE
-#define ES_RPRN LSFT(KC_9)
+#define ES_GRTR ES_RABK
-#define ES_EQL LSFT(KC_0)
-#define ES_QUES LSFT(ES_APOS)
-#define ES_IQUE LSFT(ES_IEXL)
-
-#define ES_CIRC LSFT(ES_GRV)
-#define ES_ASTR LSFT(ES_PLUS)
-
-#define ES_UMLT LSFT(ES_GRV)
-
-#define ES_GRTR LSFT(ES_LESS)
-#define ES_SCLN LSFT(KC_COMM)
-#define ES_COLN LSFT(KC_DOT)
-#define ES_UNDS LSFT(ES_MINS)
-
-// Alt Gr-ed characters
-#define ES_BSLS ALGR(ES_OVRR)
-#define ES_PIPE ALGR(KC_1)
-#define ES_AT ALGR(KC_2)
-#define ES_HASH ALGR(KC_3)
-#define ES_TILD ALGR(ES_NTIL)
-#define ES_EURO ALGR(KC_5)
-#define ES_NOT ALGR(KC_6)
-
-#define ES_LBRC ALGR(ES_GRV)
-#define ES_RBRC ALGR(ES_PLUS)
-
-#define ES_LCBR ALGR(ES_ACUT)
-#define ES_RCBR ALGR(ES_CCED)
-
-#endif

quantum/keymap_extras/keymap_swedish.h

@@ -14,74 +14,165 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef KEYMAP_SWEDISH_H
+#pragma once
-#define KEYMAP_SWEDISH_H
 
 #include "keymap.h"
 
-// Normal characters
+// clang-format off
-#define SE_HALF KC_GRV
-#define SE_PLUS KC_MINS
-#define SE_ACUT KC_EQL
 
-#define SE_AM KC_LBRC
+/*
-#define SE_QUOT KC_RBRC  // this is the "umlaut" char on Nordic keyboards, Apple layout
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
-#define SE_AE KC_QUOT    // ä
+ * │ § │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ + │ ´ │       │
-#define SE_OSLH KC_SCLN  // ö
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
-#define SE_APOS KC_NUHS
+ * │     │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ Å │ ¨ │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │ A │ S │ D │ F │ G │ H │ J │ K │ L │ Ö │ Ä │ ' │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ < │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ - │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
+#define SE_SECT KC_GRV  // §
+#define SE_1    KC_1    // 1
+#define SE_2    KC_2    // 2
+#define SE_3    KC_3    // 3
+#define SE_4    KC_4    // 4
+#define SE_5    KC_5    // 5
+#define SE_6    KC_6    // 6
+#define SE_7    KC_7    // 7
+#define SE_8    KC_8    // 8
+#define SE_9    KC_9    // 9
+#define SE_0    KC_0    // 0
+#define SE_PLUS KC_MINS // +
+#define SE_ACUT KC_EQL  // ´ (dead)
+// Row 2
+#define SE_Q    KC_Q    // Q
+#define SE_W    KC_W    // W
+#define SE_E    KC_E    // E
+#define SE_R    KC_R    // R
+#define SE_T    KC_T    // T
+#define SE_Y    KC_Y    // Y
+#define SE_U    KC_U    // U
+#define SE_I    KC_I    // I
+#define SE_O    KC_O    // O
+#define SE_P    KC_P    // P
+#define SE_ARNG KC_LBRC // Å
+#define SE_DIAE KC_RBRC // ¨ (dead)
+// Row 3
+#define SE_A    KC_A    // A
+#define SE_S    KC_S    // S
+#define SE_D    KC_D    // D
+#define SE_F    KC_F    // F
+#define SE_G    KC_G    // G
+#define SE_H    KC_H    // H
+#define SE_J    KC_J    // J
+#define SE_K    KC_K    // K
+#define SE_L    KC_L    // L
+#define SE_ODIA KC_SCLN // Ö
+#define SE_ADIA KC_QUOT // Ä
+#define SE_QUOT KC_NUHS // '
+// Row 4
+#define SE_LABK KC_NUBS // <
+#define SE_Z    KC_Z    // Z
+#define SE_X    KC_X    // X
+#define SE_C    KC_C    // C
+#define SE_V    KC_V    // V
+#define SE_B    KC_B    // B
+#define SE_N    KC_N    // N
+#define SE_M    KC_M    // M
+#define SE_COMM KC_COMM // ,
+#define SE_DOT  KC_DOT  // .
+#define SE_MINS KC_SLSH // -
 
-#define SE_LESS KC_NUBS
+/* Shifted symbols
-#define SE_MINS KC_SLSH
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │ ½ │ ! │ " │ # │ ¤ │ % │ & │ / │ ( │ ) │ = │ ? │ ` │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │   │   │   │   │   │   │   │   │   │   │   │ ^ │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │   │   │   │   │   │   │   │   │   │   │   │ * │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ > │   │   │   │   │   │   │   │ ; │ : │ _ │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
+#define SE_HALF S(SE_SECT) // ½
+#define SE_EXLM S(SE_1)    // !
+#define SE_DQUO S(SE_2)    // "
+#define SE_HASH S(SE_3)    // #
+#define SE_CURR S(SE_4)    // ¤
+#define SE_PERC S(SE_5)    // %
+#define SE_AMPR S(SE_6)    // &
+#define SE_SLSH S(SE_7)    // /
+#define SE_LPRN S(SE_8)    // (
+#define SE_RPRN S(SE_9)    // )
+#define SE_EQL  S(SE_0)    // =
+#define SE_QUES S(SE_PLUS) // ?
+#define SE_GRV  S(SE_ACUT) // ` (dead)
+// Row 2
+#define SE_CIRC S(SE_DIAE) // ^ (dead)
+// Row 3
+#define SE_ASTR S(SE_QUOT) // *
+// Row 4
+#define SE_RABK S(SE_LABK) // >
+#define SE_SCLN S(SE_COMM) // ;
+#define SE_COLN S(SE_DOT)  // :
+#define SE_UNDS S(SE_MINS) // _
 
-// Shifted characters
+/* AltGr symbols
-#define SE_SECT LSFT(SE_HALF)
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
-#define SE_QUO2 LSFT(KC_2)
+ * │   │   │ @ │ £ │ $ │ € │   │ { │ [ │ ] │ } │ \ │   │       │
-#define SE_BULT LSFT(KC_4)
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
-#define SE_AMPR LSFT(KC_6)
+ * │     │   │   │   │   │   │   │   │   │   │   │   │ ~ │     │
-#define SE_SLSH LSFT(KC_7)
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
-#define SE_LPRN LSFT(KC_8)
+ * │      │   │   │   │   │   │   │   │   │   │   │   │   │    │
-#define SE_RPRN LSFT(KC_9)
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
-#define SE_EQL LSFT(KC_0)
+ * │    │ | │   │   │   │   │   │   │ µ │   │   │   │          │
-#define SE_QUES LSFT(SE_PLUS)
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
-#define SE_GRV LSFT(SE_ACUT)
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
+#define SE_AT   ALGR(SE_2)    // @
+#define SE_PND  ALGR(SE_3)    // £
+#define SE_DLR  ALGR(SE_4)    // $
+#define SE_EURO ALGR(SE_5)    // €
+#define SE_LCBR ALGR(SE_7)    // {
+#define SE_LBRC ALGR(SE_8)    // [
+#define SE_RBRC ALGR(SE_9)    // ]
+#define SE_RCBR ALGR(SE_0)    // }
+#define SE_BSLS ALGR(SE_PLUS) // (backslash)
+// Row 2
+#define SE_TILD ALGR(SE_DIAE) // ~ (dead)
+// Row 4
+#define SE_PIPE ALGR(SE_LABK) // |
+#define SE_MICR ALGR(SE_M)    // µ
 
-#define SE_CIRC LSFT(KC_RBRC)  // ^
+// DEPRECATED
+#include "keymap_nordic.h"
 
-#define SE_GRTR LSFT(SE_LESS)
+#undef  NO_AE
-#define SE_SCLN LSFT(KC_COMM)
+#undef  NO_CIRC
-#define SE_COLN LSFT(KC_DOT)
+#undef  NO_OSLH
-#define SE_UNDS LSFT(SE_MINS)
 
-// Alt Gr-ed characters
+#define NO_AE   SE_AE
-#define SE_AT ALGR(KC_2)
+#define NO_CIRC SE_CIRC
-#define SE_PND ALGR(KC_3)
+#define NO_OSLH SE_ODIA
-#define SE_DLR ALGR(KC_4)
+#define NO_AA   SE_ARNG
-#define SE_LCBR ALGR(KC_7)
+#define NO_ASTR SE_ASTR
-#define SE_LBRC ALGR(KC_8)
+// Swedish macOS symbols (not vetted)
-#define SE_RBRC ALGR(KC_9)
+#define NO_ACUT_MAC SE_ACUT
-#define SE_RCBR ALGR(KC_0)
+#define NO_APOS_MAC SE_LABK
-#define SE_PIPE ALGR(KC_NUBS)
+#define NO_AT_MAC   SE_ADIA
-
+#define NO_BSLS_MAC S(SE_LCBR)
-#define SE_EURO ALGR(KC_E)
+#define NO_DLR_MAC  SE_CURR
-#define SE_TILD ALGR(SE_QUOT)
+#define NO_GRV_MAC  SE_BSLS
-
+#define NO_GRTR_MAC SE_HALF
-#define SE_BSLS ALGR(KC_MINS)
+#define NO_LCBR_MAC S(SE_LBRC)
-#define SE_MU ALGR(KC_M)
+#define NO_LESS_MAC SE_SECT
-
+#define NO_PIPE_MAC SE_LCBR
-#define SE_AA KC_LBRC          // å
+#define NO_RCBR_MAC S(SE_RBRC)
-#define SE_ASTR LSFT(KC_BSLS)  // *
-
-// Norwegian unique MAC characters (not vetted for Swedish)
-#define SE_ACUT_MAC KC_EQL            // =
-#define SE_APOS_MAC KC_NUBS           // '
-#define SE_AT_MAC KC_BSLS             // @
-#define SE_BSLS_MAC ALGR(LSFT(KC_7))  // '\'
-#define SE_DLR_MAC ALGR(KC_4)         // $
-#define SE_GRV_MAC ALGR(SE_BSLS)      // `
-#define SE_GRTR_MAC LSFT(KC_GRV)      // >
-#define SE_LCBR_MAC ALGR(LSFT(KC_8))  // {
-#define SE_LESS_MAC KC_GRV            // <
-#define SE_PIPE_MAC ALGR(KC_7)        // |
-#define SE_RCBR_MAC ALGR(LSFT(KC_9))  // }
-
-#endif

quantum/keymap_extras/sendstring_spanish.h

@@ -40,7 +40,7 @@ const uint8_t ascii_to_shift_lut[16] PROGMEM = {
     KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
     KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
     KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0)
 };
 
 const uint8_t ascii_to_altgr_lut[16] PROGMEM = {
@@ -60,7 +60,7 @@ const uint8_t ascii_to_altgr_lut[16] PROGMEM = {
     KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
     KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
     KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 1, 1, 1, 1, 0),
+    KCLUT_ENTRY(0, 0, 0, 1, 1, 1, 1, 0)
 };
 
 const uint8_t ascii_to_keycode_lut[128] PROGMEM = {
@@ -74,27 +74,27 @@ const uint8_t ascii_to_keycode_lut[128] PROGMEM = {
     XXXXXXX, XXXXXXX, XXXXXXX, KC_ESC,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
 
     //       !        "        #        $        %        &        '
-    KC_SPC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    ES_APOS,
+    KC_SPC,  ES_1,    ES_2,    ES_3,    ES_4,    ES_5,    ES_6,    ES_QUOT,
     // (     )        *        +        ,        -        .        /
-    KC_8,    KC_9,    ES_PLUS, ES_PLUS, KC_COMM, ES_MINS, KC_DOT,  KC_7,
+    ES_8,    ES_9,    ES_PLUS, ES_PLUS, ES_COMM, ES_MINS, ES_DOT,  ES_7,
     // 0     1        2        3        4        5        6        7
-    KC_0,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,
+    ES_0,    ES_1,    ES_2,    ES_3,    ES_4,    ES_5,    ES_6,    ES_7,
     // 8     9        :        ;        <        =        >        ?
-    KC_8,    KC_9,    KC_DOT,  KC_COMM, ES_LESS, KC_0,    ES_LESS, ES_APOS,
+    ES_8,    ES_9,    ES_DOT,  ES_COMM, ES_LABK, ES_0,    ES_LABK, ES_QUOT,
     // @     A        B        C        D        E        F        G
-    KC_2,    KC_A,    KC_B,    KC_C,    KC_D,    KC_E,    KC_F,    KC_G,
+    ES_2,    ES_A,    ES_B,    ES_C,    ES_D,    ES_E,    ES_F,    ES_G,
     // H     I        J        K        L        M        N        O
-    KC_H,    KC_I,    KC_J,    KC_K,    KC_L,    KC_M,    KC_N,    KC_O,
+    ES_H,    ES_I,    ES_J,    ES_K,    ES_L,    ES_M,    ES_N,    ES_O,
     // P     Q        R        S        T        U        V        W
-    KC_P,    KC_Q,    KC_R,    KC_S,    KC_T,    KC_U,    KC_V,    KC_W,
+    ES_P,    ES_Q,    ES_R,    ES_S,    ES_T,    ES_U,    ES_V,    ES_W,
     // X     Y        Z        [        \        ]        ^        _
-    KC_X,    KC_Y,    KC_Z,    ES_GRV,  ES_OVRR, ES_PLUS, ES_GRV,  ES_MINS,
+    ES_X,    ES_Y,    ES_Z,    ES_GRV,  ES_MORD, ES_PLUS, ES_GRV,  ES_MINS,
     // `     a        b        c        d        e        f        g
-    ES_GRV,  KC_A,    KC_B,    KC_C,    KC_D,    KC_E,    KC_F,    KC_G,
+    ES_GRV,  ES_A,    ES_B,    ES_C,    ES_D,    ES_E,    ES_F,    ES_G,
     // h     i        j        k        l        m        n        o
-    KC_H,    KC_I,    KC_J,    KC_K,    KC_L,    KC_M,    KC_N,    KC_O,
+    ES_H,    ES_I,    ES_J,    ES_K,    ES_L,    ES_M,    ES_N,    ES_O,
     // p     q        r        s        t        u        v        w
-    KC_P,    KC_Q,    KC_R,    KC_S,    KC_T,    KC_U,    KC_V,    KC_W,
+    ES_P,    ES_Q,    ES_R,    ES_S,    ES_T,    ES_U,    ES_V,    ES_W,
     // x     y        z        {        |        }        ~        DEL
-    KC_X,    KC_Y,    KC_Z,    ES_ACUT, KC_1,    ES_CCED, ES_NTIL, KC_DEL
+    ES_X,    ES_Y,    ES_Z,    ES_ACUT, ES_1,    ES_CCED, ES_NTIL, KC_DEL
 };

quantum/keymap_extras/sendstring_swedish.h

@@ -0,0 +1,100 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Sendstring lookup tables for Swedish layouts
+
+#pragma once
+
+#include "keymap_swedish.h"
+#include "quantum.h"
+
+// clang-format off
+
+const uint8_t ascii_to_shift_lut[16] PROGMEM = {
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+
+    KCLUT_ENTRY(0, 1, 1, 1, 0, 1, 1, 0),
+    KCLUT_ENTRY(1, 1, 1, 0, 0, 0, 0, 1),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 1, 1, 0, 1, 1, 1),
+    KCLUT_ENTRY(0, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 0, 0, 0, 1, 1),
+    KCLUT_ENTRY(1, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0)
+};
+
+const uint8_t ascii_to_altgr_lut[16] PROGMEM = {
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+
+    KCLUT_ENTRY(0, 0, 0, 0, 1, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(1, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 1, 1, 1, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 1, 1, 1, 1, 0)
+};
+
+const uint8_t ascii_to_keycode_lut[128] PROGMEM = {
+    // NUL   SOH      STX      ETX      EOT      ENQ      ACK      BEL
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    // BS    TAB      LF       VT       FF       CR       SO       SI
+    KC_BSPC, KC_TAB,  KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    // DLE   DC1      DC2      DC3      DC4      NAK      SYN      ETB
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    // CAN   EM       SUB      ESC      FS       GS       RS       US
+    XXXXXXX, XXXXXXX, XXXXXXX, KC_ESC,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+
+    //       !        "        #        $        %        &        '
+    KC_SPC,  SE_1,    SE_2,    SE_3,    SE_4,    SE_5,    SE_6,    SE_QUOT,
+    // (     )        *        +        ,        -        .        /
+    SE_8,    SE_9,    SE_QUOT, SE_PLUS, SE_COMM, SE_MINS, SE_DOT,  SE_7,
+    // 0     1        2        3        4        5        6        7
+    SE_0,    SE_1,    SE_2,    SE_3,    SE_4,    SE_5,    SE_6,    SE_7,
+    // 8     9        :        ;        <        =        >        ?
+    SE_8,    SE_9,    SE_DOT,  SE_COMM, SE_LABK, SE_0,    SE_LABK, SE_PLUS,
+    // @     A        B        C        D        E        F        G
+    SE_2,    SE_A,    SE_B,    SE_C,    SE_D,    SE_E,    SE_F,    SE_G,
+    // H     I        J        K        L        M        N        O
+    SE_H,    SE_I,    SE_J,    SE_K,    SE_L,    SE_M,    SE_N,    SE_O,
+    // P     Q        R        S        T        U        V        W
+    SE_P,    SE_Q,    SE_R,    SE_S,    SE_T,    SE_U,    SE_V,    SE_W,
+    // X     Y        Z        [        \        ]        ^        _
+    SE_X,    SE_Y,    SE_Z,    SE_8,    SE_PLUS, SE_9,    SE_DIAE, SE_MINS,
+    // `     a        b        c        d        e        f        g
+    SE_ACUT, SE_A,    SE_B,    SE_C,    SE_D,    SE_E,    SE_F,    SE_G,
+    // h     i        j        k        l        m        n        o
+    SE_H,    SE_I,    SE_J,    SE_K,    SE_L,    SE_M,    SE_N,    SE_O,
+    // p     q        r        s        t        u        v        w
+    SE_P,    SE_Q,    SE_R,    SE_S,    SE_T,    SE_U,    SE_V,    SE_W,
+    // x     y        z        {        |        }        ~        DEL
+    SE_X,    SE_Y,    SE_Z,    SE_7,    SE_LABK, SE_0,    SE_DIAE, KC_DEL
+};

tmk_core/common/mousekey.c

@@ -39,6 +39,9 @@ static uint16_t       last_timer      = 0;
 
 #ifndef MK_3_SPEED
 
+static uint16_t last_timer_c = 0;
+static uint16_t last_timer_w = 0;
+
 /*
  * Mouse keys  acceleration algorithm
  *  http://en.wikipedia.org/wiki/Mouse_keys
@@ -56,6 +59,10 @@ uint8_t mk_time_to_max = MOUSEKEY_TIME_TO_MAX;
 /* ramp used to reach maximum pointer speed (NOT SUPPORTED) */
 // int8_t mk_curve = 0;
 /* wheel params */
+/* milliseconds between the initial key press and first repeated motion event (0-2550) */
+uint8_t mk_wheel_delay = MOUSEKEY_WHEEL_DELAY / 10;
+/* milliseconds between repeated motion events (0-255) */
+uint8_t mk_wheel_interval    = MOUSEKEY_WHEEL_INTERVAL;
 uint8_t mk_wheel_max_speed   = MOUSEKEY_WHEEL_MAX_SPEED;
 uint8_t mk_wheel_time_to_max = MOUSEKEY_WHEEL_TIME_TO_MAX;
 
@@ -96,33 +103,54 @@ static uint8_t wheel_unit(void) {
 }
 
 void mousekey_task(void) {
-    if (timer_elapsed(last_timer) < (mousekey_repeat ? mk_interval : mk_delay * 10)) {
+    // report cursor and scroll movement independently
-        return;
+    report_mouse_t const tmpmr = mouse_report;
-    }
+    if ((mouse_report.x || mouse_report.y) && timer_elapsed(last_timer_c) > (mousekey_repeat ? mk_interval : mk_delay * 10)) {
-    if (mouse_report.x == 0 && mouse_report.y == 0 && mouse_report.v == 0 && mouse_report.h == 0) {
+        if (mousekey_repeat != UINT8_MAX) mousekey_repeat++;
-        return;
+        mouse_report.v = 0;
-    }
+        mouse_report.h = 0;
-    if (mousekey_repeat != UINT8_MAX) mousekey_repeat++;
+        if (mouse_report.x > 0) mouse_report.x = move_unit();
-    if (mouse_report.x > 0) mouse_report.x = move_unit();
+        if (mouse_report.x < 0) mouse_report.x = move_unit() * -1;
-    if (mouse_report.x < 0) mouse_report.x = move_unit() * -1;
+        if (mouse_report.y > 0) mouse_report.y = move_unit();
-    if (mouse_report.y > 0) mouse_report.y = move_unit();
+        if (mouse_report.y < 0) mouse_report.y = move_unit() * -1;
-    if (mouse_report.y < 0) mouse_report.y = move_unit() * -1;
+        /* diagonal move [1/sqrt(2)] */
-    /* diagonal move [1/sqrt(2)] */
+        if (mouse_report.x && mouse_report.y) {
-    if (mouse_report.x && mouse_report.y) {
+            mouse_report.x = times_inv_sqrt2(mouse_report.x);
-        mouse_report.x = times_inv_sqrt2(mouse_report.x);
+            if (mouse_report.x == 0) {
-        if (mouse_report.x == 0) {
+                mouse_report.x = 1;
-            mouse_report.x = 1;
+            }
-        }
+            mouse_report.y = times_inv_sqrt2(mouse_report.y);
-        mouse_report.y = times_inv_sqrt2(mouse_report.y);
+            if (mouse_report.y == 0) {
-        if (mouse_report.y == 0) {
+                mouse_report.y = 1;
-            mouse_report.y = 1;
+            }
         }
+        mousekey_send();
+        last_timer_c = last_timer;
+        mouse_report = tmpmr;
+    }
+    if ((mouse_report.v || mouse_report.h) && timer_elapsed(last_timer_w) > (mousekey_repeat ? mk_wheel_interval : mk_wheel_delay * 10)) {
+        if (mousekey_repeat != UINT8_MAX) mousekey_repeat++;
+        mouse_report.x = 0;
+        mouse_report.y = 0;
+        if (mouse_report.v > 0) mouse_report.v = wheel_unit();
+        if (mouse_report.v < 0) mouse_report.v = wheel_unit() * -1;
+        if (mouse_report.h > 0) mouse_report.h = wheel_unit();
+        if (mouse_report.h < 0) mouse_report.h = wheel_unit() * -1;
+        /* diagonal move [1/sqrt(2)] */
+        if (mouse_report.v && mouse_report.h) {
+            mouse_report.v = times_inv_sqrt2(mouse_report.v);
+            if (mouse_report.v == 0) {
+                mouse_report.v = 1;
+            }
+            mouse_report.h = times_inv_sqrt2(mouse_report.h);
+            if (mouse_report.h == 0) {
+                mouse_report.h = 1;
+            }
+        }
+        mousekey_send();
+        last_timer_w = last_timer;
+        mouse_report = tmpmr;
     }
-    if (mouse_report.v > 0) mouse_report.v = wheel_unit();
-    if (mouse_report.v < 0) mouse_report.v = wheel_unit() * -1;
-    if (mouse_report.h > 0) mouse_report.h = wheel_unit();
-    if (mouse_report.h < 0) mouse_report.h = wheel_unit() * -1;
-    mousekey_send();
 }
 
 void mousekey_on(uint8_t code) {

tmk_core/common/mousekey.h

@@ -55,6 +55,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    ifndef MOUSEKEY_TIME_TO_MAX
 #        define MOUSEKEY_TIME_TO_MAX 20
 #    endif
+#    ifndef MOUSEKEY_WHEEL_DELAY
+#        define MOUSEKEY_WHEEL_DELAY 300
+#    endif
+#    ifndef MOUSEKEY_WHEEL_INTERVAL
+#        define MOUSEKEY_WHEEL_INTERVAL 100
+#    endif
 #    ifndef MOUSEKEY_WHEEL_MAX_SPEED
 #        define MOUSEKEY_WHEEL_MAX_SPEED 8
 #    endif

users/danielo515/alt_tab.c

@@ -0,0 +1,38 @@
+#include "danielo515.h"
+#include "alt_tab.h"
+
+bool                       altPressed = false;
+__attribute__((weak)) void alt_tab_activated(void){};
+__attribute__((weak)) void alt_tab_deactivated(void){};
+extern bool                onMac;
+
+// =============== ALT_TAB single key handling
+bool process_alt_tab(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case ALT_TAB:
+            if (!record->event.pressed) {
+                return false;
+            }
+            if (altPressed) {
+                tap_code(KC_TAB);
+            } else {
+                altPressed = true;
+                onMac ? register_code(KC_LGUI) : register_code(KC_LALT);
+                tap_code(KC_TAB);
+                alt_tab_activated();
+            }
+        // avoid alt releasing if the key is of movement
+        case KC_RIGHT ... KC_UP:
+            if (altPressed) {
+                return true;  // yes QMK, do your stuff
+            }
+    }
+    // Reset sticky alt tab when any other key is pressed
+    if (altPressed) {
+        onMac ? unregister_code(KC_LGUI) : unregister_code(KC_LALT);
+        altPressed = false;
+        alt_tab_deactivated();
+        return false;
+    }
+    return true;
+};

users/danielo515/alt_tab.h

@@ -0,0 +1,4 @@
+#pragma once
+#include "quantum.h"
+
+bool process_alt_tab(uint16_t keycode, keyrecord_t *record);

users/danielo515/combo.c

@@ -1,21 +1,36 @@
 #include "combo.h"
+
 enum combos {
-  JK_ESC,
+    JK_ESC,
-  YU_COM,
+    YU_COM,
-  UI_COM,
+    UI_COM,
-  IO_COM,
+    IO_COM,
-  OP_COM,
+    QW_COM,
-  QW_COM
+    COM_SLS,
+    COM_DOT,
+    M_COMM,
+    N_M,
+    OP_COM,
 };
 
 const uint16_t PROGMEM ui_combo[] = {KC_U, KC_I, COMBO_END};
 const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END};
 const uint16_t PROGMEM yu_combo[] = {KC_Y, KC_U, COMBO_END};
 const uint16_t PROGMEM io_combo[] = {KC_I, KC_O, COMBO_END};
+const uint16_t PROGMEM qw_combo[] = {KC_Q, KC_W, COMBO_END};
+const uint16_t PROGMEM com_sls[] = {KC_COMMA, KC_SLSH, COMBO_END};
+const uint16_t PROGMEM com_dot[] = {KC_COMMA, KC_DOT, COMBO_END};
+const uint16_t PROGMEM m_comm[] = {KC_M,KC_COMMA,  COMBO_END};
+const uint16_t PROGMEM n_m[] = {KC_N, KC_M,COMBO_END};
 
 combo_t key_combos[COMBO_COUNT] = {
-  [JK_ESC] = COMBO(jk_combo, KC_ESC),
+    [JK_ESC] = COMBO(jk_combo, KC_ESC),
-  [YU_COM] = COMBO(yu_combo, KC_CIRC),
+    [YU_COM] = COMBO(yu_combo, KC_CIRC),
-  [UI_COM] = COMBO(ui_combo, KC_ESC),
+    [UI_COM] = COMBO(ui_combo, KC_DLR),
-  [IO_COM] = COMBO(io_combo, KC_TILD)
+    [IO_COM] = COMBO(io_combo, KC_TILD),
+    [QW_COM] = COMBO(qw_combo, KC_AT),
+    [COM_SLS] = COMBO(com_sls, KC_QUES),
+    [COM_DOT] = COMBO(com_dot, KC_QUES),
+    [M_COMM] = COMBO(m_comm, KC_ESC),
+    [N_M] = COMBO(n_m, KC_DLR),
 };

users/danielo515/config.h

@@ -1,6 +1,10 @@
 #pragma once
 
 #if defined(COMBO_ENABLE)
-  #define COMBO_COUNT 4
+  #define COMBO_COUNT 9
-  #define COMBO_TERM  50
+  #define COMBO_TERM  40
 #endif // !COMBO_ENABLE
+// Timeout settings for leader key
+#undef  LEADER_TIMEOUT
+#define LEADER_TIMEOUT 350
+#define LEADER_PER_KEY_TIMING

users/danielo515/danielo515.c

@@ -1,373 +1,87 @@
 #include "danielo515.h"
 
 bool onMac = true;
-// Send control or GUI depending if we are on windows or mac
-bool CMD(uint16_t kc) {
-  if(onMac){ tap_code16(LGUI(kc)); } else { tap_code16(LCTL(kc)); }
-  return false;
-}
-
-//**************** Handle keys function *********************//
-bool altPressed = false;
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record)
-{
-  bool pressed = record->event.pressed;
-  if(pressed){
-    refresh_incremental_macros(keycode);
-    if(process_incremental_macro(keycode)){
-      return false;
-    }
-    if(is_macro(keycode)){
-      return handle_macro(keycode);
-    }
-   switch (keycode) {
-        case MAC_TGL:
-        onMac = !onMac;
-        onMac ? SEND_STRING("On mac") : SEND_STRING("Not on MAC");
-        return false;
-      }
-  }
-
-  switch (keycode)
-  {
-    case QWERTY:
-        if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_qwerty);
-        #endif
-        layer_on(_QWERTY);
-        }
-        return false;
-    case LOWER:
-        if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-        } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-        }
-        return false;
-    case RAISE:
-        if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-        } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-        }
-        return false;
-    case ADJUST:
-    if (record->event.pressed) {
-        layer_on(_ADJUST);
-        } else {
-        layer_off(_ADJUST);
-        }
-        return false;
- // == Macros START ===
-  case ARROW:
-    if (record->event.pressed) SEND_STRING("->");
-    return false;
-  case F_ARROW:
-    if (record->event.pressed) SEND_STRING("=>");
-    return false;
-  case GREP:
-    if (record->event.pressed) SEND_STRING(" | grep "); return false;
- // == Macros END ===
- // == Multi Os START ===
-  case KC_HOME:// make the home behave the same on OSX
-    if (record->event.pressed && onMac) {
-        SEND_STRING(SS_LCTRL("a"));
-        return false;
-    }
-  case KC_END:// make the end behave the same on OSX
-    if (record->event.pressed && onMac) {
-        tap_code16(C(KC_E));
-        return false;
-    }
-  case AC_A:// Accent á
-    if (record->event.pressed) SEND_STRING(SS_LALT("e") "a"); return false;
-  case AC_E:// Accent é
-    if (record->event.pressed) SEND_STRING(SS_LALT("e") "e"); return false;
-  case AC_I:// Accent í
-    if (record->event.pressed) SEND_STRING(SS_LALT("e") "i"); return false;
-  case AC_O:// Accent ó
-    if (record->event.pressed) SEND_STRING(SS_LALT("e") "o"); return false;
-  case CUT: if (record->event.pressed) return CMD(KC_X);
-  case COPY:
-    if (record->event.pressed) {
-     onMac ?  SEND_STRING(SS_LGUI("c")) : SEND_STRING(SS_LCTRL("c"));
-    }
-    return false;
-  case PASTE:
-    if (record->event.pressed) {
-     onMac ?  SEND_STRING(SS_LGUI("v")) : SEND_STRING(SS_LCTRL("v"));
-    }
-    return false;
-  case SAVE:
-    if (record->event.pressed) {
-     onMac ?  SEND_STRING(SS_LGUI("s")) : SEND_STRING(SS_LCTRL("s"));
-    }
-    return false;
-  case UNDO:
-    if (record->event.pressed) {
-     onMac ?  SEND_STRING(SS_LGUI("z")) : SEND_STRING(SS_LCTRL("z"));
-    }
-    return false;
-  case FIND:
-    if (record->event.pressed) {
-     onMac ?  SEND_STRING(SS_LGUI("f")) : SEND_STRING(SS_LCTRL("f"));
-    }
-    return false;
-  case CHG_LAYOUT:
-    if (record->event.pressed) {
-     onMac ?  SEND_STRING(SS_LCTRL(" ")) : SEND_STRING(SS_LCTRL("f"));
-    }
-    return false;
- // == Multi Os END ===
-#ifdef RGBLIGHT_ENABLE
-  case RGB_SLD:
-    if (record->event.pressed) { rgblight_mode(1); }
-    return false;
-    break;
-    //First time alt + tab, and alt stays sticky. Next press we just send tab. Any other key releases the alt
-#endif
-  case ALT_TAB:
-    if (record->event.pressed)
-    {
-      if (altPressed)
-      {
-        tap_code(KC_TAB);
-      }
-      else
-      {
-        altPressed = true;
-        layer_on(7); // go to movement layer
-        onMac ? register_code(KC_LGUI) : register_code(KC_LALT);
-        tap_code(KC_TAB);
-      }
-    }
-    return false;
-  // avoid alt releasing if the key is of movement
-  case KC_RIGHT ... KC_UP:
-    if (altPressed)
-    {
-      return true; // yes QMK, do your stuff
-    }
-  }
-  // Reset sticky alt tab
-  if (altPressed)
-  {
-    onMac ?  unregister_code(KC_LGUI) : unregister_code(KC_LALT);
-    altPressed = false;
-    layer_off(7);
-    return false;
-  }
-  return true;
-};
 
 //**************** LEADER *********************//
 #ifdef LEADER_ENABLE
 LEADER_EXTERNS();
-#ifdef RGBLIGHT_ENABLE
+#    ifdef RGBLIGHT_ENABLE
 
-void leader_start() {
+void leader_start() { rgblight_setrgb_range(5, 100, 199, 10, 15); };
-  rgblight_setrgb_range(5, 100, 199, 10,15);
-};
 
-void leader_end(){
+void leader_end() { rgblight_setrgb_range(200, 200, 255, 10, 15); };
-  rgblight_setrgb_range(200, 200, 255, 10,15);
+#    endif
-};
-#endif
 
-void matrix_scan_user(void)
+void matrix_scan_user(void) {
-{
+    if (leading && leader_sequence_size > 0 && timer_elapsed(leader_time) > LEADER_TIMEOUT) {
-  if (leading && leader_sequence_size > 0 && timer_elapsed(leader_time) > LEADER_TIMEOUT)
+        leading = false;
-  {
+        SEQ_ONE_KEY(KC_T) { SEND_STRING("``" SS_TAP(X_LEFT)); }
-    leading = false;
+        // Triple ticks
-    SEQ_ONE_KEY(KC_T) {
+        SEQ_TWO_KEYS(KC_T, KC_T) { SEND_STRING("```" SS_TAP(X_ENTER) SS_TAP(X_ENTER) "```" SS_TAP(X_UP)); }
-      SEND_STRING("``" SS_TAP(X_LEFT));
+        // ==== International spanish accent vowels ====
-    }
+        SEQ_ONE_KEY(KC_A) { SEND_STRING(SS_LALT("e") "a"); }
-    // Triple ticks
+        SEQ_ONE_KEY(KC_E) { SEND_STRING(SS_LALT("e") "e"); }
-    SEQ_TWO_KEYS(KC_T, KC_T) {
+        SEQ_ONE_KEY(KC_I) { SEND_STRING(SS_LALT("e") "i"); }
-      SEND_STRING("```" SS_TAP(X_ENTER) SS_TAP(X_ENTER) "```" SS_TAP(X_UP));
+        SEQ_ONE_KEY(KC_O) { SEND_STRING(SS_LALT("e") "o"); }
-    }
+        SEQ_ONE_KEY(KC_U) { SEND_STRING(SS_LALT("e") "u"); }
-    // ==== International spanish accent vowels ====
+        SEQ_ONE_KEY(KC_N) { SEND_STRING(SS_LALT("n") "n"); }
-    SEQ_ONE_KEY(KC_A) {
+        // ==== MACROS ===
-      SEND_STRING(SS_LALT("e") "a");
+        SEQ_ONE_KEY(KC_G) { SEND_STRING(" | grep "); }
-    }
+        SEQ_ONE_KEY(KC_K) { onMac ? SEND_STRING(SS_LCTRL(" ")) : SEND_STRING(SS_LCTRL("f")); }
-    SEQ_ONE_KEY(KC_E) {
+        // vim delete all
-      SEND_STRING(SS_LALT("e") "e");
+        SEQ_TWO_KEYS(KC_D, KC_G) {
-    }
+            if (onMac) {
-    SEQ_ONE_KEY(KC_I) {
+                SEND_STRING(SS_LGUI("a") SS_TAP(X_D));
-      SEND_STRING(SS_LALT("e") "i");
+            } else {
-    }
+                SEND_STRING(SS_LCTRL("a") SS_TAP(X_D));
-    SEQ_ONE_KEY(KC_O) {
+            }
-      SEND_STRING(SS_LALT("e") "o");
+        }
-    }
+        // tripe delete!
-    SEQ_ONE_KEY(KC_U) {
+        SEQ_ONE_KEY(KC_BSPACE) { SEND_STRING(SS_TAP(X_BSPACE) SS_TAP(X_BSPACE) SS_TAP(X_BSPACE)); }
-      SEND_STRING(SS_LALT("e") "u");
+        SEQ_TWO_KEYS(KC_P, KC_G) { SEND_STRING("ps -ef | grep "); }
-    }
+        SEQ_TWO_KEYS(KC_J, KC_A) { SEND_STRING("() => {}" SS_TAP(X_LEFT) SS_TAP(X_LEFT) SS_TAP(X_LEFT) SS_TAP(X_LEFT) SS_TAP(X_LEFT) SS_TAP(X_LEFT) SS_TAP(X_LEFT)); }
-    SEQ_ONE_KEY(KC_N) { // ñ
+        // this is a pain to type
-      SEND_STRING(SS_LALT("n") "n");
+        SEQ_TWO_KEYS(KC_S, KC_S) { SEND_STRING("~/.ssh/ "); }
-    }
+        SEQ_TWO_KEYS(KC_F, KC_T) { SEND_STRING("feat():" SS_TAP(X_LEFT) SS_TAP(X_LEFT)); }
-    // ==== MACROS ===
+        // ### LAYER CHANGE
-    SEQ_ONE_KEY(KC_G) { // grep
+        SEQ_ONE_KEY(KC_1) { layer_on(1); }
-      SEND_STRING(" | grep ");
+        // control enter, because yes
-    }
+        SEQ_ONE_KEY(KC_H) { SEND_STRING(SS_DOWN(X_LCTRL) SS_TAP(X_ENTER) SS_UP(X_LCTRL)); }
-    SEQ_ONE_KEY(KC_K) {
+        // paste all
-        onMac ?  SEND_STRING(SS_LCTRL(" ")) : SEND_STRING(SS_LCTRL("f"));
+        SEQ_ONE_KEY(KC_P) {
-    }
+            if (onMac) {
-    SEQ_TWO_KEYS(KC_D, KC_G) { // vim delete all
+                SEND_STRING(SS_LGUI("a") SS_LGUI("v"));
-      if(onMac){
+            } else {
-        SEND_STRING(SS_LGUI("a") SS_TAP(X_D));
+                SEND_STRING(SS_LCTRL("a") SS_LCTRL("v"));
-      } else {
+            }
-        SEND_STRING(SS_LCTRL("a") SS_TAP(X_D));
+        }
-      }
+        SEQ_THREE_KEYS(KC_M, KC_A, KC_C) {
-    }
+            onMac = true;
-    SEQ_ONE_KEY(KC_BSPACE) { // tripe delete!
+#    ifdef RGBLIGHT_ENABLE
-      SEND_STRING(SS_TAP(X_BSPACE) SS_TAP(X_BSPACE) SS_TAP(X_BSPACE));
+            rgblight_setrgb(255, 255, 255);
-    }
+#    endif
-    SEQ_TWO_KEYS(KC_P, KC_G) {
+        }
-      SEND_STRING("ps -ef | grep ");
+        SEQ_THREE_KEYS(KC_W, KC_I, KC_N) {
-    }
+            onMac = false;
-    SEQ_TWO_KEYS(KC_J, KC_A) {
+#    ifdef RGBLIGHT_ENABLE
-      SEND_STRING("() => {}"SS_TAP(X_LEFT) SS_TAP(X_LEFT)SS_TAP(X_LEFT) SS_TAP(X_LEFT)SS_TAP(X_LEFT) SS_TAP(X_LEFT)SS_TAP(X_LEFT));
+            rgblight_setrgb(255, 255, 0);
-    }
+#    endif
-    SEQ_TWO_KEYS(KC_S, KC_S) {
+        }
-      SEND_STRING("~/.ssh/ "); // this is a pain to type
+        /*  Copy all */
-    }
+        SEQ_ONE_KEY(KC_Y) {
-    SEQ_TWO_KEYS(KC_F, KC_T) {
+            if (onMac) {
-      SEND_STRING("feat():" SS_TAP(X_LEFT) SS_TAP(X_LEFT));
+                SEND_STRING(SS_LGUI("a") SS_LGUI("c"));
-    }
+            } else {
-    // ### LAYER CHANGE
+                SEND_STRING(SS_LCTRL("a") SS_LCTRL("c"));
-    SEQ_ONE_KEY(KC_1) {
+            }
-      layer_on(1);
+        }
-    }
+        // emoji bar
-    SEQ_ONE_KEY(KC_H) { // control enter, because yes
+        SEQ_TWO_KEYS(KC_E, KC_E) { SEND_STRING(SS_DOWN(X_LGUI) SS_LCTRL(" ") SS_UP(X_LGUI)); }
-      SEND_STRING(SS_DOWN(X_LCTRL) SS_TAP(X_ENTER) SS_UP(X_LCTRL));
-    }
-    // paste all
-    SEQ_ONE_KEY(KC_P) {
-      if(onMac){
-        SEND_STRING(SS_LGUI("a") SS_LGUI("v"));
-      } else {
-        SEND_STRING(SS_LCTRL("a") SS_LCTRL("v"));
-      }
-    }
-    SEQ_THREE_KEYS(KC_M, KC_A, KC_C) {
-      onMac = true;
-    #ifdef RGBLIGHT_ENABLE
-      rgblight_setrgb(255, 255, 255);
-    #endif
-    }
-    SEQ_THREE_KEYS(KC_W, KC_I, KC_N) {
-      onMac = false;
-    #ifdef RGBLIGHT_ENABLE
-      rgblight_setrgb(255, 255, 0);
-    #endif
-    }
-    /*  Copy all */
-    SEQ_ONE_KEY(KC_Y) {
-      if(onMac){
-        SEND_STRING(SS_LGUI("a") SS_LGUI("c"));
-      } else {
-        SEND_STRING(SS_LCTRL("a") SS_LCTRL("c"));
-      }
-    }
-    //emoji bar
-    SEQ_TWO_KEYS(KC_E, KC_E) {
-      SEND_STRING(SS_DOWN(X_LGUI) SS_LCTRL(" ") SS_UP(X_LGUI));
-    }
 
-    SEQ_TWO_KEYS(KC_F, KC_F) {
+        SEQ_TWO_KEYS(KC_F, KC_F) { SEND_STRING("ps -ef | grep "); }
-      SEND_STRING("ps -ef | grep ");
+        SEQ_TWO_KEYS(KC_H, KC_T) { SEND_STRING("https://"); }
-    }
-    SEQ_TWO_KEYS(KC_H, KC_T) {
-      SEND_STRING("https://");
-    }
 
-    leader_end();
+        leader_end();
-  }
+    }
 }
-#endif // LEADER
+#endif  // LEADER
-
-// ======== INCREMENTAL MACROS STUFF =============
-
-#define MAX_INCREMENTAL_MACRO 20
-#define TAP_ROTATION_TIMEOUT 400
-
-uint16_t latest_kc = 0;
-uint16_t latest_rotation = 0;
-int key_count = 0;
-
-const char incremental_macros[][MAX_INCREMENTAL_MACRO] = { "String1"SS_TAP(X_HOME)"X-", "String2"SS_TAP(X_HOME) };
-
-bool process_incremental_macro (uint16_t kc) {
-
-  if( kc < INC_MACROS_START || kc > INC_MACROS_END ){
-    return false;
-  }
-  int macro_idx = (int) (kc - INC_MACROS_START) - 1;
-  char tempstring[3] = {0};
-  tempstring[0] = incremental_macros[macro_idx][key_count];
-  // Special cases of SS_TAP SS_UP and SS_DOWN, they require two characters so get both once and skip on next iteration
-  if( tempstring[0] == '\1' || tempstring[0] == '\2' || tempstring[0] == '\3'){
-    tempstring[1] = incremental_macros[macro_idx][++key_count];
-  }
-  if( tempstring[0] == '\0'){
-    key_count = 0;
-  }
-  send_string(tempstring);
-
-  return true;
-};
-
-void refresh_incremental_macros (uint16_t kc) {
-  if (kc == latest_kc)
-    {
-      if ( (timer_elapsed(latest_rotation) > TAP_ROTATION_TIMEOUT) || (key_count >= MAX_INCREMENTAL_MACRO) ) key_count = 0;
-      else key_count++;
-    } else {
-      key_count = 0;
-      latest_kc = kc;
-    }
-
-  latest_rotation = timer_read();
-}
-
-
-// ======== VISUAL STUDIO CODE SHORTCUTS STUFF
-
-bool is_macro (uint16_t kc){
-  return kc > MACRO_START && kc < MACRO_END;
-};
-
-bool command_shift_p (bool isMac) {
-   isMac
-   ? SEND_STRING(SS_DOWN(X_LSHIFT)SS_LGUI("p")SS_UP(X_LSHIFT))
-   : SEND_STRING(SS_DOWN(X_LSHIFT)SS_LCTRL("p")SS_UP(X_LSHIFT));
-   return false;
-};
-
-bool VSCommand(bool isMac, char *cmd)
-{
-  command_shift_p (isMac);
-  send_string(cmd);
-  SEND_STRING(SS_TAP(X_ENTER));
-  return false;
-};
-
-bool handle_macro(uint16_t kc)
-{
-  switch (kc)
-  {
-    case T_TERM: return VSCommand(onMac, "toit");
-    case FIX_ALL: return VSCommand(onMac, "faap");
-    case BLK_CMNT: return VSCommand(onMac, "tbc");
-    case LN_CMNT: return VSCommand(onMac, "tlic");
-    case CMD_S_P: return command_shift_p(onMac);
-    case TRI_TICKS: SEND_STRING("[[[ "); break;
-  }
-  return false;
-};

users/danielo515/danielo515.h

@@ -1,104 +1,6 @@
 #pragma once
-
 #include "quantum.h"
-
+#include "process_records.h"
-
-bool handle_macro(uint16_t kc);
-bool is_macro (uint16_t kc);
-bool process_incremental_macro (uint16_t);
-void refresh_incremental_macros (uint16_t);
-//**************** KEYCODES *********************//
-
-enum custom_keycodes
-{
-  PLACEHOLDER = SAFE_RANGE, // can always be here
-  EPRM,
-  RGB_SLD,
-  ALT_TAB,
-  // Macros
-  ARROW,
-  F_ARROW,
-  QWERTY,
-  GREP,
-  // Accented characters
-  AC_A,
-  AC_E,
-  AC_I,
-  AC_O,
-  // Custom multi-os key-codes
-  CUT,
-  COPY,
-  PASTE,
-  SAVE,
-  UNDO,
-  CHG_LAYOUT,
-  FIND,
-  // OTHER OLD STUFF
-  LOWER,
-  RAISE,
-  ADJUST,
-  MAC_TGL,
-  MACRO_START,  // START OF VSC DECLARATIONS
-  T_TERM,
-  FIX_ALL,
-  BLK_CMNT,
-  LN_CMNT,
-  CMD_S_P,
-  TRI_TICKS,
-  MACRO_END,  // END OF VSC DECLARATIONS
-  INC_MACROS_START,
-  INC_MACROS_END,
-};
-
-
-enum layers {
-  _QWERTY,
-  _LOWER,
-  _RAISE,
-  _F,
-  _D,
-  _A,
-  _S,
-  _J,
-  _K,
-  _MACROS,
-  _ADJUST,
-  _SAFE_LAYER
-};
-
-// Function letters
-#define FN_F LT(_F,KC_F)
-#define FN_D LT(_D,KC_D)
-#define FN_S LT(_S,KC_S)
-#define FN_A LT(_A,KC_A)
-#define FN_K LT(_K,KC_K)
-#define FN_J LT(_J,KC_J)
-#define KC_FN_D FN_D
-#define KC_FN_S FN_S
-#define KC_FN_F FN_F
-
-#define KC_MACROS OSL(_MACROS)
-
-
-#define KC_E_COLN LSFT(KC_DOT)
-#define KC_E_EQL ES_EQL
-#define KC_GUI OSM(MOD_RGUI)
-#define KC_R_NUB S(KC_NUBS)
-#define KC_E_LT KC_NUBS
-#define KC_E_GT S(KC_NUBS)
-#define KC_E_TILD ES_TILD
-#define KC_E_MINS ES_MINS
-#define KC_S_SPC SFT_T(KC_SPC)  // Tap for Space, hold for Shift
-#define KC_E_OVRR ES_OVRR
-#define KC_E_APOS ES_APOS
-#define KC_E_IEXL ES_IEXL
-// Short hand for complex key combinations
-# define WIN_LEFT_HALF LALT(LGUI(KC_LEFT))
-# define WIN_RIGHT_HALF LALT(LGUI(KC_RIGHT))
-# define WIN_TO_LEFT LALT(LSFT( LGUI(KC_LEFT) ))
-# define WIN_TO_RIGHT LALT(LSFT( LGUI(KC_RIGHT) ))
-
-// Ready to use Tap dance definitions, just put them on your layout
 
 #ifdef TAP_DANCE_ENABLE
     #include "tap_dance.h"

users/danielo515/process_records.c

@@ -0,0 +1,167 @@
+#include "process_records.h"
+#include "alt_tab.h"
+extern bool onMac;
+// ======== INCREMENTAL MACROS STUFF =============
+#define MAX_INCREMENTAL_MACRO 20
+#define TAP_ROTATION_TIMEOUT 400
+uint16_t latest_kc = 0;
+uint16_t latest_rotation = 0;
+int key_count = 0;
+
+const char incremental_macros[][MAX_INCREMENTAL_MACRO] = { "String1"SS_TAP(X_HOME)"X-", "String2"SS_TAP(X_HOME) };
+
+bool process_incremental_macro(uint16_t kc) {
+    if (kc < INC_MACROS_START || kc > INC_MACROS_END) {
+        return false;
+    }
+    int  macro_idx     = (int)(kc - INC_MACROS_START) - 1;
+    char tempstring[3] = {0};
+    tempstring[0]      = incremental_macros[macro_idx][key_count];
+    // Special cases of SS_TAP SS_UP and SS_DOWN, they require two characters so get both once and skip on next iteration
+    if (tempstring[0] == '\1' || tempstring[0] == '\2' || tempstring[0] == '\3') {
+        tempstring[1] = incremental_macros[macro_idx][++key_count];
+    }
+    if (tempstring[0] == '\0') {
+        key_count = 0;
+    }
+    send_string(tempstring);
+
+    return true;
+};
+
+void refresh_incremental_macros(uint16_t kc) {
+    if (kc == latest_kc) {
+        if ((timer_elapsed(latest_rotation) > TAP_ROTATION_TIMEOUT) || (key_count >= MAX_INCREMENTAL_MACRO))
+            key_count = 0;
+        else
+            key_count++;
+    } else {
+        key_count = 0;
+        latest_kc = kc;
+    }
+
+    latest_rotation = timer_read();
+}
+// Send control or GUI depending if we are on windows or mac
+bool CMD(uint16_t kc) {
+    if(onMac){ tap_code16(LGUI(kc)); } else { tap_code16(LCTL(kc)); }
+    return false;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    bool pressed = record->event.pressed;
+    if(pressed){
+        refresh_incremental_macros(keycode);
+        if(process_incremental_macro(keycode)){
+            return false;
+        }
+        switch (keycode) {
+            case MAC_TGL:
+            onMac = !onMac;
+            onMac ? SEND_STRING("On mac") : SEND_STRING("Not on MAC");
+            return false;
+        }
+    }
+
+    switch (keycode) {
+    case QWERTY:
+        if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+        PLAY_SONG(tone_qwerty);
+        #endif
+        layer_on(_QWERTY);
+        }
+        return false;
+    case LOWER:
+        if (record->event.pressed) {
+        layer_on(_LOWER);
+        } else {
+        layer_off(_LOWER);
+        }
+        return false;
+    case RAISE:
+        if (record->event.pressed) {
+        layer_on(_RAISE);
+        } else {
+        layer_off(_RAISE);
+        }
+        return false;
+    case ADJUST:
+    if (record->event.pressed) {
+        layer_on(_ADJUST);
+        } else {
+        layer_off(_ADJUST);
+        }
+        return false;
+ // == Macros START ===
+    case IARROW: if (record->event.pressed) SEND_STRING("<-"); return false;
+    case ARROW: if (record->event.pressed) SEND_STRING("->"); return false;
+    case F_ARROW: if (record->event.pressed) SEND_STRING("=>"); return false;
+    case GREP: if (record->event.pressed) SEND_STRING(" | grep "); return false;
+    case CLN_EQ: if (record->event.pressed) SEND_STRING(":="); return false;
+ // == Macros END ===
+ // == Multi Os START ===
+  case KC_HOME:// make the home behave the same on OSX
+    if (record->event.pressed && onMac) {
+        SEND_STRING(SS_LCTRL("a"));
+        return false;
+    }
+  case KC_END:// make the end behave the same on OSX
+    if (record->event.pressed && onMac) {
+        tap_code16(C(KC_E));
+        return false;
+    }
+  case AC_A:// Accent á
+    if (record->event.pressed) SEND_STRING(SS_LALT("e") "a"); return false;
+  case AC_E:// Accent é
+    if (record->event.pressed) SEND_STRING(SS_LALT("e") "e"); return false;
+  case AC_I:// Accent í
+    if (record->event.pressed) SEND_STRING(SS_LALT("e") "i"); return false;
+  case AC_O:// Accent ó
+    if (record->event.pressed) SEND_STRING(SS_LALT("e") "o"); return false;
+  case CUT: if (record->event.pressed) return CMD(KC_X);
+  case COPY:
+    if (record->event.pressed) {
+     onMac ?  SEND_STRING(SS_LGUI("c")) : SEND_STRING(SS_LCTRL("c"));
+    }
+    return false;
+  case PASTE:
+    if (record->event.pressed) {
+     onMac ?  SEND_STRING(SS_LGUI("v")) : SEND_STRING(SS_LCTRL("v"));
+    }
+    return false;
+  case SAVE:
+    if (record->event.pressed) {
+     onMac ?  SEND_STRING(SS_LGUI("s")) : SEND_STRING(SS_LCTRL("s"));
+    }
+    return false;
+  case UNDO:
+    if (record->event.pressed) {
+     onMac ?  SEND_STRING(SS_LGUI("z")) : SEND_STRING(SS_LCTRL("z"));
+    }
+    return false;
+  case FIND:
+    if (record->event.pressed) {
+     onMac ?  SEND_STRING(SS_LGUI("f")) : SEND_STRING(SS_LCTRL("f"));
+    }
+    return false;
+  case CHG_LAYOUT:
+    if (record->event.pressed) {
+     onMac ?  SEND_STRING(SS_LCTRL(" ")) : SEND_STRING(SS_LCTRL("f"));
+    }
+    return false;
+ // == Multi Os END ===
+#ifdef RGBLIGHT_ENABLE
+  case RGB_SLD:
+    if (record->event.pressed) { rgblight_mode(1); }
+    return false;
+    break;
+    //First time alt + tab, and alt stays sticky. Next press we just send tab. Any other key releases the alt
+#endif
+  }
+// =============== ALT_TAB single key handling
+  return process_alt_tab(keycode, record);
+};
+
+
+

users/danielo515/process_records.h

@@ -0,0 +1,104 @@
+#pragma once
+#include "quantum.h"
+
+enum custom_keycodes
+{
+    EPRM = SAFE_RANGE, 
+    RGB_SLD,
+    ALT_TAB,
+    QWERTY,
+    SYM,
+    NAV,
+    ADJUST,
+// Macros
+    ARROW,
+    IARROW,
+    CLN_EQ,
+    F_ARROW,
+    GREP,
+// Accented characters
+    AC_A,
+    AC_E,
+    AC_I,
+    AC_O,
+// Custom multi-os key-codes
+    CUT,
+    COPY,
+    PASTE,
+    SAVE,
+    UNDO,
+    CHG_LAYOUT,
+    FIND,
+// OTHER OLD STUFF
+    LOWER,
+    RAISE,
+    MAC_TGL,
+    INC_MACROS_START,
+    INC_MACROS_END,
+};
+
+//**************** KEYCODES *********************//
+enum layers {
+    _QWERTY,
+    _SYMB,
+    _NAV,
+    _ADJUST,
+    _F,
+    _D,
+    _S,
+    _A,
+    _J,
+    _K,
+    // iris specific - TBD
+    _LOWER,
+    _RAISE,
+    _MACROS,
+    _SAFE_LAYER
+};
+
+//===== Function letters
+# define FN_F LT(_F,KC_F)
+# define FN_D LT(_D,KC_D)
+# define FN_S LT(_S,KC_S)
+# define FN_A LT(_A,KC_A)
+# define FN_K LT(_K,KC_K)
+# define FN_J LT(_J,KC_J)
+# define KC_FN_D FN_D
+# define KC_FN_S FN_S
+# define KC_FN_F FN_F
+
+# define KC_MACROS OSL(_MACROS)
+
+
+# define KC_E_COLN LSFT(KC_DOT)
+# define KC_E_EQL ES_EQL
+# define KC_GUI OSM(MOD_RGUI)
+# define KC_R_NUB S(KC_NUBS)
+# define KC_E_LT KC_NUBS
+# define KC_E_GT S(KC_NUBS)
+# define KC_E_TILD ES_TILD
+# define KC_E_MINS ES_MINS
+# define KC_E_OVRR ES_OVRR
+# define KC_E_APOS ES_APOS
+# define KC_E_IEXL ES_IEXL
+//==========  Short hand for complex key combinations
+# define WIN_LEFT_HALF LALT(LGUI(KC_LEFT))
+# define WIN_RIGHT_HALF LALT(LGUI(KC_RIGHT))
+# define WIN_TO_LEFT LALT(LSFT( LGUI(KC_LEFT) ))
+# define WIN_TO_RIGHT LALT(LSFT( LGUI(KC_RIGHT) ))
+# define ALL_WIN LCTL(KC_DOWN)
+# define EXPOSE LGUI(KC_DOWN)
+// ========== Modifiers!!
+# define SHIFT OSM(MOD_LSFT)
+//=============== tap for key hold for mod
+# define HYPR_H HYPR_T(KC_H)
+# define CTL_K RCTL_T(KC_K)
+# define ALT_J ALT_T(KC_J)
+# define SFT_MINS LSFT_T(KC_MINS) // tap - hold shift
+# define CMD_QUOT GUI_T(KC_QUOTE) // tap ' hold cmd
+//=============== Movement modified
+# define CTL_LEFT LCTL(KC_LEFT)
+# define CTL_RIGHT LCTL(KC_RIGHT)
+
+# define SFT_LEFT LSFT(KC_LEFT)
+# define SFT_RIGHT LSFT(KC_RIGHT)

users/danielo515/rules.mk

@@ -1,4 +1,6 @@
-SRC += danielo515.c
+SRC +=  danielo515.c \
+        alt_tab.c \
+		process_records.c
 
 ifeq ($(strip $(COMBO_ENABLE)), yes)
     SRC += combo.c