Fix layer debug calls (#8370)

* Added my config

* Update my keymap

* Improve quality of brett.c

* Finish cleaning brett.c

* Remove QMK_FIRMWARE_H

* Update keyboards/hhkb/keymaps/brett/keymap.c

Co-Authored-By: Ryan <[email protected]>

Co-authored-by: Ryan <[email protected]>

keyboards/ares/config.h

@@ -42,8 +42,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBLIGHT_ANIMATIONS
 
-#define NO_UART 1
-
 /* key combination for magic key command */
 /* defined by default; to change, uncomment and set to the combination you want */
 // #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/bfake/config.h

@@ -41,5 +41,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_LEVELS 3
 
 #define RGBLIGHT_ANIMATIONS
-
-#define NO_UART 1

keyboards/coseyfannitutti/discipad/config.h

@@ -49,7 +49,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-#define NO_UART 1
 #define USB_MAX_POWER_CONSUMPTION 100
 
 /*

keyboards/coseyfannitutti/discipline/config.h

@@ -47,7 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-#define NO_UART 1
 #define USB_MAX_POWER_CONSUMPTION 100
 
 /*

keyboards/coseyfannitutti/mysterium/config.h

@@ -47,8 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-#define NO_UART 1
-
 /*
  * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
  */

keyboards/crkbd/keymaps/rpbaptist/config.h

@@ -25,88 +25,115 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Select hand configuration */
 #define EE_HANDS
 
-#undef SSD1306OLED
+#ifdef OLED_DRIVER_ENABLE
-
+#    undef SSD1306OLED
-#define USE_SERIAL_PD2
+#    define OLED_TIMEOUT 600000
-
-#define FORCE_NKRO
-
-#define QMK_ESC_OUTPUT F4 // usually COL
-#define QMK_ESC_INPUT D4 // usually ROW
-#define QMK_LED B0
-
-#ifdef RGB_MATRIX_ENABLE
-  #define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
-  #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
-
-  #define RGB_MATRIX_HUE_STEP 10
-  #define RGB_MATRIX_SAT_STEP 15
-  #define RGB_MATRIX_VAL_STEP 16
-  #define RGB_MATRIX_SPD_STEP 10
-
-  #define DISABLE_RGB_MATRIX_ALPHAS_MODS
-  #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-  #define DISABLE_RGB_MATRIX_BREATHING
-  #define DISABLE_RGB_MATRIX_BAND_SAT
-  #define DISABLE_RGB_MATRIX_BAND_VAL
-  #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-  #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-  #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-  #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-  // #define DISABLE_RGB_MATRIX_CYCLE_ALL
-  #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-  #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
-  #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
-  #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
-  #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-  #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
-  #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
-  // #define DISABLE_RGB_MATRIX_DUAL_BEACON
-  #define DISABLE_RGB_MATRIX_RAINBOW_BEACON
-  #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
-  #define DISABLE_RGB_MATRIX_RAINDROPS
-  #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
-
-  #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-  // #define DISABLE_RGB_MATRIX_TYPING_HEATMAP
-  #define DISABLE_RGB_MATRIX_DIGITAL_RAIN
-
-  #define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
-
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-  #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-  // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
-
-  // #define DISABLE_RGB_MATRIX_SPLASH
-  #define DISABLE_RGB_MATRIX_MULTISPLASH
-  #define DISABLE_RGB_MATRIX_SOLID_SPLASH
-  #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
-
-  #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_TYPING_HEATMAP
 #endif
 
-#define TAPPING_TERM 150
+#undef USE_I2C
-// #define PERMISSIVE_HOLD
+#define USE_SERIAL_PD2
+
+// #define FORCE_NKRO
+
+#define QMK_ESC_OUTPUT F4  // usually COL
+#define QMK_ESC_INPUT D4   // usually ROW
+#define QMK_LED B0
+
+#define NO_ACTION_ONESHOT
+
+#ifdef RGB_MATRIX_ENABLE
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED true  // turn off effects when suspended
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
+
+#    define RGB_MATRIX_HUE_STEP 8
+#    define RGB_MATRIX_SAT_STEP 12
+#    define RGB_MATRIX_VAL_STEP 10
+#    define RGB_MATRIX_SPD_STEP 10
+
+#    define DISABLE_RGB_MATRIX_ALPHAS_MODS
+#    define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#    define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#    define DISABLE_RGB_MATRIX_BREATHING
+#    define DISABLE_RGB_MATRIX_BAND_SAT
+#    define DISABLE_RGB_MATRIX_BAND_VAL
+#    define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#    define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#    define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#    define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+
+// #define DISABLE_RGB_MATRIX_CYCLE_ALL
+// #    define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#    define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
+#    define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#    define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#    define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#    define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
+#    define DISABLE_RGB_MATRIX_DUAL_BEACON
+#    define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+// #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#    define DISABLE_RGB_MATRIX_RAINDROPS
+#    define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+
+#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP
+#    define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+
+#    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
+
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+// #    define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+
+#    define DISABLE_RGB_MATRIX_SPLASH
+#    define DISABLE_RGB_MATRIX_MULTISPLASH
+#    define DISABLE_RGB_MATRIX_SOLID_SPLASH
+#    define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+#    define RGB_MATRIX_ANIMATION_SPEED_DEFAULT UINT8_MAX / 2
+#    define RGB_MATRIX_ANIMATION_SPEED_SLOW RGB_MATRIX_ANIMATION_SPEED_DEFAULT / 4
+#    define RGB_MATRIX_ANIMATION_SPEED_SLOWER RGB_MATRIX_ANIMATION_SPEED_SLOW / 3
+#endif
+
+#define TAPPING_TERM 140
+#define PERMISSIVE_HOLD
 #define IGNORE_MOD_TAP_INTERRUPT
-// #define RETRO_TAPPING
 
 #define TAPPING_TOGGLE 2
 
-#define MOUSEKEY_DELAY             0
+#ifdef MOUSEKEY_ENABLE
-#define MOUSEKEY_INTERVAL          16
+#    define MOUSEKEY_DELAY 0
-#define MOUSEKEY_MAX_SPEED         6
+#    define MOUSEKEY_INTERVAL 16
-#define MOUSEKEY_TIME_TO_MAX       32
+#    define MOUSEKEY_MAX_SPEED 6
-#define MOUSEKEY_WHEEL_MAX_SPEED   4
+#    define MOUSEKEY_TIME_TO_MAX 36
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 40
+#    define MOUSEKEY_WHEEL_MAX_SPEED 4
+#    define MOUSEKEY_WHEEL_TIME_TO_MAX 100
+#endif
 
-#define OLED_FONT_H "keyboards/crkbd/keymaps/rpbaptist/glcdfont.c"
+#ifdef THEME_GODSPEED
+#   define OLED_FONT_H "keyboards/crkbd/keymaps/rpbaptist/glcdfont_godspeed.c"
+#   define THEME_HSV 132, 255, 125
+#endif
+
+#ifdef THEME_PULSE
+#   define OLED_FONT_H "keyboards/crkbd/keymaps/rpbaptist/glcdfont_pulse.c"
+#   define THEME_HSV 123, 255, 125
+#endif
+
+#ifdef THEME_LASER
+#   define OLED_FONT_H "keyboards/crkbd/keymaps/rpbaptist/glcdfont_laser.c"
+#   define THEME_HSV HSV_MAGENTA
+#endif
 
 #define NO_ACTION_ONESHOT
 
 #undef PRODUCT
 #define PRODUCT Corne Keyboard
+
+#define LCPC_KEYS KC_LCTL, KC_LSFT, KC_9
+#define RCPC_KEYS KC_RCTL, KC_RSFT, KC_0

keyboards/crkbd/keymaps/rpbaptist/glcdfont_godspeed.c

@@ -0,0 +1,231 @@
+#include "progmem.h"
+
+// Helidox 8x6 font with QMK Firmware Logo
+// Online editor: http://teripom.x0.com/
+
+const unsigned char font[] PROGMEM = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xE0,
+0x38, 0x1C, 0x0C, 0x06, 0x03, 0x03,
+0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+0x03, 0x03, 0x82, 0x86, 0xCC, 0xF8,
+0xF0, 0xF0, 0x38, 0x1C, 0x0C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0xC0, 0x70,
+0xF8, 0x0C, 0x04, 0xC6, 0xA2, 0xB3,
+0x9F, 0x87, 0x01, 0x01, 0x1F, 0x66,
+0x66, 0x44, 0x4C, 0x58, 0x70, 0xE0,
+0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xC0,
+0xE0, 0x78, 0x18, 0x8C, 0xC6, 0xE6,
+0xE3, 0xE3, 0xC3, 0x83, 0x03, 0x03,
+0x73, 0x76, 0x76, 0x0C, 0x18, 0xF8,
+0xF0, 0xC0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x80, 0xC0, 0x40, 0x7F, 0xF3,
+0x60, 0x20, 0x30, 0x30, 0x38, 0x18,
+0x9C, 0xCC, 0x6C, 0x6E, 0x3E, 0x3E,
+0x1F, 0x0F, 0x0F, 0x03, 0x03, 0x01,
+0xC0, 0xFF, 0x3E, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x7F, 0xC1, 0x00,
+0x1D, 0x67, 0xC0, 0x80, 0x01, 0x00,
+0x00, 0xF0, 0x0F, 0x00, 0x00, 0x00,
+0x0C, 0x1A, 0x32, 0xC2, 0x01, 0xC1,
+0xFF, 0x3E, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x7E, 0xFF,
+0x80, 0x00, 0x00, 0xC3, 0xC7, 0xC7,
+0x8F, 0x0F, 0x07, 0x03, 0x80, 0xC0,
+0xC0, 0xC0, 0xC0, 0x80, 0x00, 0x07,
+0x0F, 0xFF, 0x7F, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x01, 0x01, 0x00, 0x40, 0x60, 0x31,
+0x3B, 0x1E, 0x0C, 0x1E, 0x36, 0x23,
+0x61, 0x60, 0x60, 0x60, 0x60, 0x60,
+0x60, 0x30, 0x1C, 0x3E, 0x3E, 0x3F,
+0x1D, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x01, 0x07,
+0x0C, 0x18, 0x10, 0x33, 0x3E, 0x38,
+0x6E, 0x67, 0x60, 0x60, 0x60, 0x20,
+0x30, 0x18, 0x08, 0x0F, 0x06, 0x03,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
+0x03, 0x06, 0x0C, 0x19, 0x31, 0x21,
+0x60, 0x60, 0x60, 0x60, 0x61, 0x63,
+0x67, 0x67, 0x33, 0x39, 0x18, 0x0E,
+0x07, 0x03, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};

keyboards/crkbd/keymaps/rpbaptist/glcdfont_laser.c

@@ -0,0 +1,231 @@
+#include "progmem.h"
+
+// Helidox 8x6 font with QMK Firmware Logo
+// Online editor: http://teripom.x0.com/
+
+const unsigned char font[] PROGMEM = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+0xE0, 0xF8, 0x3E, 0x0F, 0x03, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x80, 0xC0,
+0xE0, 0xF0, 0xF8, 0xFC, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xE0, 0xF0, 0x7C,
+0x3F, 0x0F, 0x03, 0x03, 0x03, 0x03,
+0x03, 0x03, 0x1B, 0x1F, 0x1F, 0x07,
+0x03, 0xC0, 0xE0, 0xFC, 0x1C, 0x0F,
+0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
+0x03, 0x03, 0x03, 0x03, 0x03, 0x03,
+0xE7, 0xFF, 0xFF, 0x0F, 0x03, 0x03,
+0x03, 0x03, 0x83, 0x83, 0xE3, 0xE7,
+0x3C, 0x3C, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x80, 0xC0, 0xF0, 0x7C, 0x1F, 0x07,
+0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+0x80, 0x90, 0x98, 0x9C, 0x8C, 0x80,
+0x80, 0x80, 0x9C, 0x9C, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
+0x10, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+0x1C, 0x1C, 0x9C, 0x9C, 0x1C, 0x1C,
+0x0C, 0x0C, 0x80, 0x90, 0x90, 0x10,
+0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x0C,
+0x00, 0x00, 0x90, 0x90, 0x9C, 0x9C,
+0x1C, 0x1C, 0x1C, 0x1C, 0x9C, 0x9C,
+0x9C, 0x0C, 0x0C, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x70, 0x7C, 0x7E,
+0x6F, 0x63, 0x60, 0x60, 0x60, 0x60,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x60,
+0x60, 0x70, 0x78, 0x3C, 0x1E, 0x0F,
+0x07, 0x03, 0x01, 0x01, 0x01, 0x01,
+0x01, 0x01, 0x7F, 0x7F, 0x00, 0x00,
+0x60, 0x70, 0x7C, 0x7C, 0x6C, 0x60,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x78,
+0x3E, 0x0F, 0x03, 0x01, 0x00, 0x60,
+0x78, 0x7E, 0x67, 0x61, 0x60, 0x60,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x60,
+0x70, 0x00, 0x00, 0x00, 0x00, 0x60,
+0x78, 0x7E, 0x0F, 0x07, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x03, 0x0F,
+0x7F, 0x70, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};

keyboards/crkbd/keymaps/rpbaptist/glcdfont_pulse.c

@@ -0,0 +1,231 @@
+#include "progmem.h"
+
+// Helidox 8x6 font with QMK Firmware Logo
+// Online editor: http://teripom.x0.com/
+
+const unsigned char font[] PROGMEM = {
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+  0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+  0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+  0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+  0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+  0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+  0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+  0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+  0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+  0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+  0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+  0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+  0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+  0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+  0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+  0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+  0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+  0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+  0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+  0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+  0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+  0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+  0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+  0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+  0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+  0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+  0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+  0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+  0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+  0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+  0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+  0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+  0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+  0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+  0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+  0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+  0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+  0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+  0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+  0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+  0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+  0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+  0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+  0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+  0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+  0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+  0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+  0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+  0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+  0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+  0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+  0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+  0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+  0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+  0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+  0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+  0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+  0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+  0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+  0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+  0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+  0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+  0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+  0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+  0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+  0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+  0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+  0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+  0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+  0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+  0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+  0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+  0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+  0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+  0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+  0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+  0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+  0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+  0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+  0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+  0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+  0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+  0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+  0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+  0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+  0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+  0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+  0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+  0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+  0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+  0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+  0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+  0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+  0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+  0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+  0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+  0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+  0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+  0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+  0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+  0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+  0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+  0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+  0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+  0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+  0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+  0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+  0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+  0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+  0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+  0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+  0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+  0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+  0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+  0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+  0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+  0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+  0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+  0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+  0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+  0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+  0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+  0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+  0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+  0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x80, 0xF0, 0xF8, 0xF8, 0xF0,
+  0x80, 0x00, 0x00, 0x00, 0x00, 0x80,
+  0xF0, 0xFE, 0x7F, 0x7F, 0xFE, 0xF0,
+  0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC,
+  0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00,
+  0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E,
+  0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00,
+  0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
+  0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
+  0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
+  0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1F, 0x0F, 0x03, 0x03, 0x1F,
+  0xFF, 0xFC, 0xE0, 0xE0, 0xFC, 0xFF,
+  0x1F, 0x03, 0x00, 0x00, 0x03, 0x1F,
+  0xFF, 0xFC, 0xE0, 0xE0, 0xF8, 0xFC,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C,
+  0x1F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F,
+  0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00,
+  0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F,
+  0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00,
+  0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
+  0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
+  0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
+  0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x07, 0x0F, 0x0F, 0x07, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x07, 0x0F, 0x0F, 0x07, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};

keyboards/crkbd/keymaps/rpbaptist/keymap.c

@@ -1,46 +1,84 @@
 #include QMK_KEYBOARD_H
 
-extern uint8_t is_master;
+extern uint8_t  is_master;
+static uint32_t oled_timer = 0;
+
+#ifdef RGB_MATRIX_ENABLE
+    static uint32_t hypno_timer;
+#endif
 
 enum layer_names {
   _COLEMAKDHM,
   _GAMING,
   _GAMING_EXT,
-  _NUM,
+  _NUMPAD,
-  _FN,
+  _SYM,
   _NAV,
   _UTIL
 };
 
+enum custom_keycodes {
+    BSP_DEL = SAFE_RANGE,
+    RGB_RST,  // Reset RGB
+    RGB_UND,  // Toggle RGB underglow as layer indicator
+    RGB_IDL,  // RGB Idling animations
+    RGB_MAP,  // RGB_MATRIX_TYPING_HEATMAP
+    RGB_NXS,  // RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+    RGB_SOL,  // RGB_MATRIX_SOLID_COLOR
+    RGB_CYC,  // RGB_MATRIX_CYCLE_ALL
+    RGB_DUO,  // RGB_MATRIX_RAINBOW_PINWHEELS
+    RGB_SCR   // RGB_MATRIX_CYCLE_LEFT_RIGHT
+};
+
+typedef union {
+    uint32_t raw;
+    struct {
+        bool     rgb_layer_change        : 1;
+        bool     rgb_matrix_idle_anim    : 1;
+        uint8_t  rgb_matrix_active_mode  : 4;
+        uint8_t  rgb_matrix_idle_mode    : 4;
+        uint8_t  rgb_matrix_active_speed : 8;
+        uint8_t  rgb_matrix_idle_speed   : 8;
+        uint16_t rgb_matrix_idle_timeout : 16;
+    };
+} user_config_t;
+
+user_config_t user_config;
+
 // Base layers
 #define COLEMAK DF(_COLEMAKDHM)
-#define GAMING DF(_GAMING)
+#define GAMING  DF(_GAMING)
 
 // Layer toggle and switch
 #define T_NAV TT(_NAV)
 #define S_NAV MO(_NAV)
 
-#define T_NUM TT(_NUM)
+#define T_SYM TT(_SYM)
-#define S_NUM MO(_NUM)
+#define S_SYM MO(_SYM)
 
 // Layer keys with functionality on tap
-#define FN_TAB LT(_FN, KC_TAB)
 #define NAV_0 LT(_NAV, KC_0)
+#define TAB_NUM LT(_NUMPAD, KC_TAB)
+
 #define EXT_SF LT(_GAMING_EXT, KC_LSHIFT)
 
 // Tap/mod keys
-#define RCTBR RCTL_T(KC_RBRACKET)
+#define RCTL_BR RCTL_T(KC_RBRACKET)
-#define LCTBR LCTL_T(KC_LBRACKET)
+#define LCTL_BR LCTL_T(KC_LBRACKET)
 
-#define SFSPC LSFT_T(KC_SPACE)
+#define SFT_SPC LSFT_T(KC_SPACE)
-#define SFENT LSFT_T(KC_ENTER)
+#define SFT_ENT RSFT_T(KC_ENTER)
 
 // Global tab forward and backward
-#define TBFWD LCTL(KC_TAB)
+#define TAB_FWD LCTL(KC_TAB)
-#define TBBCK LCTL(LSFT(KC_TAB))
+#define TAB_BCK LCTL(LSFT(KC_TAB))
+#define TAB_CLS LCTL(KC_W)
 
-// Custom key for NUM layer
+#define WIN_CLS LALT(KC_F4)
-#define CTEQL RCTL_T(KC_EQL)
+
+// CTRL become parens keys on NAV and NUM layers
+#define LCT_PRN KC_LCPO
+#define RCT_PRN KC_RCPC
 
 // €
 #define KC_EUR ALGR(KC_5)
@@ -48,19 +86,19 @@ enum layer_names {
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_COLEMAKDHM] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-       KC_ESC,    KC_Q,    KC_W,    KC_F,    KC_P,    KC_B,                         KC_J,    KC_L,    KC_U,    KC_Y, KC_SCLN, KC_BSPC,\
+       KC_ESC,    KC_Q,    KC_W,    KC_F,    KC_P,    KC_B,                         KC_J,    KC_L,    KC_U,    KC_Y, KC_SCLN, BSP_DEL,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-       FN_TAB,    KC_A,    KC_R,    KC_S,    KC_T,    KC_G,                         KC_M,    KC_N,    KC_E,    KC_I,    KC_O, KC_QUOT,\
+      TAB_NUM,    KC_A,    KC_R,    KC_S,    KC_T,    KC_G,                         KC_M,    KC_N,    KC_E,    KC_I,    KC_O, KC_QUOT,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-        LCTBR,    KC_Z,    KC_X,    KC_C,    KC_D,    KC_V,                         KC_K,    KC_H, KC_COMM, KC_DOT, KC_SLSH,    RCTBR,\
+      LCTL_BR,    KC_Z,    KC_X,    KC_C,    KC_D,    KC_V,                         KC_K,    KC_H, KC_COMM,  KC_DOT, KC_SLSH, RCTL_BR,\
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
-                                          KC_LALT,   T_NUM,   SFSPC,      SFENT,   T_NAV, KC_RGUI \
+                                          KC_LALT,   T_SYM, SFT_SPC,    SFT_ENT,   T_NAV, KC_RGUI \
                                       //`--------------------------'  `--------------------------'
   ),
 
   [_GAMING] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-      _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______,\
+      _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, KC_BSPC,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
        KC_TAB, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
@@ -72,59 +110,59 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_GAMING_EXT] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-       KC_GRV,    KC_1,    KC_2, _______,    KC_3,    KC_4,                        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,  KC_DEL,\
+       KC_GRV,    KC_1,    KC_2, _______,    KC_3,    KC_4,                      _______, _______, _______, _______, _______,  KC_DEL,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      KC_LBRC, KC_RBRC, _______, _______, _______, KC_BSLS,                        KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10, _______,\
+      KC_LBRC, KC_RBRC, _______, _______, _______, KC_BSLS,                      _______, _______, _______, _______, _______, _______,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-         KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,                       KC_F11,  KC_F12, KC_MINS,  KC_EQL, _______, _______,\
+         KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,                      _______, _______, _______, _______, _______, _______,\
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
                                           _______, _______, _______,     KC_ENT, _______, _______ \
                                       //`--------------------------'  `--------------------------'
   ),
 
-  [_FN] = LAYOUT( \
+  [_NUMPAD] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-       KC_F12,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                        KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,\
+      _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                       KC_EUR,   KC_P7,   KC_P8,   KC_P9, XXXXXXX, _______,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      _______, XXXXXXX, XXXXXXX, XXXXXXX, KC_CAPS, KC_NLCK,                      XXXXXXX, KC_MINS, KC_PIPE, KC_BSLS, KC_PLUS, XXXXXXX,\
+      _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                      KC_UNDS,   KC_P4,   KC_P5,   KC_P6, KC_PMNS, KC_PPLS,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      _______, XXXXXXX, KC_PAUS, KC_SLCK, KC_PSCR,  KC_INS,                      XXXXXXX, KC_UNDS,   KC_LT,   KC_GT,  KC_EQL, _______,\
+      KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_NLCK,                       KC_EQL,   KC_P1,   KC_P2,   KC_P3, KC_PSLS, KC_PAST,\
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
-                                          _______, _______, _______,    _______, _______, _______ \
+                                          _______, _______, _______,    _______,   KC_P0,  KC_DOT \
                                       //`--------------------------'  `--------------------------'
   ),
 
-  [_NUM] = LAYOUT( \
+  [_SYM] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
        KC_GRV,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                         KC_6,    KC_7,    KC_8,    KC_9,    KC_0, _______,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      KC_TILD,  KC_EXLM,  KC_AT, KC_HASH,  KC_DLR, KC_PERC,                      KC_SLSH,    KC_4,    KC_5,    KC_6, KC_MINS, KC_PLUS,\
+      KC_TILD, KC_EXLM,   KC_AT, KC_HASH,  KC_DLR, KC_PERC,                      KC_CIRC, KC_AMPR, KC_ASTR, KC_UNDS, KC_MINS, KC_PLUS,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      _______, KC_CIRC, KC_AMPR,  KC_EUR, KC_LPRN, KC_RPRN,                      KC_ASTR,    KC_1,    KC_2,    KC_3, KC_UNDS,   CTEQL,\
+      LCT_PRN, XXXXXXX, XXXXXXX, XXXXXXX,  KC_EUR, XXXXXXX,                       KC_EQL, KC_PIPE,   KC_LT,   KC_GT, KC_BSLS, RCT_PRN,\
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
-                                          _______,   S_NUM, _______,    _______, NAV_0, KC_DOT \
+                                          _______,   S_SYM, _______,    _______, _______, _______ \
                                       //`--------------------------'  `--------------------------'
   ),
 
   [_NAV] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-      _______, KC_WH_U,   TBBCK, KC_MS_U,   TBFWD, KC_BTN2,                      KC_PGUP, KC_HOME,   KC_UP,  KC_END, XXXXXXX,  KC_DEL,\
+       KC_GRV,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                      KC_PGUP, KC_HOME,   KC_UP,  KC_END, XXXXXXX, KC_BSPC,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-       KC_TAB, KC_WH_D, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN1,                      KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX,\
+      KC_TILD,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,                      KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      _______, XXXXXXX, KC_WH_L, XXXXXXX, KC_WH_R, XXXXXXX,                      XXXXXXX, KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, _______,\
+      LCT_PRN,  KC_F11,  KC_F12,  KC_INS, KC_PSCR, KC_CAPS,                      WIN_CLS, TAB_BCK, TAB_CLS, TAB_FWD, XXXXXXX, RCT_PRN,\
-  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+-------+---------|
+  //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+---------|
-                                          _______, _______, _______,    _______, S_NAV, _______ \
+                                          _______, _______, _______,    _______,   S_NAV, _______ \
                                       //`--------------------------'  `--------------------------'
   ),
 
   [_UTIL] = LAYOUT( \
   //,-----------------------------------------------------.                    ,-----------------------------------------------------.
-        RESET, XXXXXXX, KC_MSTP, KC_VOLU, KC_MNXT, XXXXXXX,                      COLEMAK,  GAMING, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
+        RESET, XXXXXXX, KC_MPRV, KC_VOLU, KC_MNXT, COLEMAK,                      RGB_IDL, RGB_MAP, RGB_NXS, XXXXXXX, RGB_HUD, RGB_HUI,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      XXXXXXX, XXXXXXX, KC_MPRV, KC_VOLD, KC_MPLY, XXXXXXX,                      XXXXXXX, RGB_MOD, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI,\
+      RGB_RST, XXXXXXX, KC_MSTP, KC_VOLD, KC_MPLY,  GAMING,                      RGB_UND, RGB_DUO, RGB_SCR, RGB_SPI, RGB_SAD, RGB_SAI,\
   //|--------+--------+--------+--------+--------+--------|                    |--------+--------+--------+--------+--------+--------|
-      XXXXXXX, KC_SLEP, XXXXXXX, KC_MUTE, XXXXXXX, XXXXXXX,                      RGB_TOG,RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD,\
+      EEP_RST, KC_SLEP, XXXXXXX, KC_MUTE, XXXXXXX, XXXXXXX,                      RGB_TOG, RGB_SOL, RGB_CYC, RGB_SPD, RGB_VAD, RGB_VAI,\
   //|--------+--------+--------+--------+--------+--------+--------|  |--------+--------+--------+--------+--------+--------+--------|
                                           _______, _______, _______,    _______, _______, _______ \
                                       //`--------------------------'  `--------------------------'
@@ -132,103 +170,404 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 layer_state_t layer_state_set_user(layer_state_t state) {
-  switch (get_highest_layer(default_layer_state)) {
+    switch (get_highest_layer(default_layer_state)) {
-    case _COLEMAKDHM:
+        case _COLEMAKDHM:
-      state = update_tri_layer_state(state, _NUM, _NAV, _UTIL);
+            state = update_tri_layer_state(state, _SYM, _NAV, _UTIL);
-      break;
+            break;
-    case _GAMING:
+        case _GAMING:
-      state = update_tri_layer_state(state, _GAMING_EXT, _NAV, _UTIL);
+            state = update_tri_layer_state(state, _GAMING_EXT, _NAV, _UTIL);
-      break;
+            break;
-  }
+    }
-  return state;
+    return state;
 }
 
 #ifdef OLED_DRIVER_ENABLE
 oled_rotation_t oled_init_user(oled_rotation_t rotation) {
-  if (is_master) {
+    if (is_master) {
-    return OLED_ROTATION_270;
+        return OLED_ROTATION_270;
-  } else {
+    } else {
-    return OLED_ROTATION_180;
+        return OLED_ROTATION_180;
-  }
+    }
 }
 
 void render_crkbd_logo(void) {
-  static const char PROGMEM crkbd_logo[] = {
+    static const char PROGMEM crkbd_logo[] = {
-      0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
-      0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
-      0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
-      0};
+        0};
-  oled_write_P(crkbd_logo, false);
+    oled_write_P(crkbd_logo, false);
 }
 
+#    ifdef RGB_MATRIX_ENABLE
+const char *rgb_matrix_anim_oled_text(uint8_t mode) {
+    switch (mode) {
+        case RGB_MATRIX_TYPING_HEATMAP:
+            return PSTR("Heat ");
+        case RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS:
+            return PSTR("Nexus");
+        case RGB_MATRIX_SOLID_COLOR:
+            return PSTR("Solid");
+        case RGB_MATRIX_CYCLE_ALL:
+            return PSTR("Cycle");
+        case RGB_MATRIX_RAINBOW_PINWHEELS:
+            return PSTR("Wheel");
+        case RGB_MATRIX_CYCLE_LEFT_RIGHT:
+            return PSTR("Wave ");
+        default:
+            return PSTR("");
+    }
+}
+#    endif
+
 void render_status(void) {
-  // oled_write_P(PSTR("Layout: "), false);
+    // oled_write_P(PSTR("Layout: "), false);
-  switch (get_highest_layer(default_layer_state)) {
+    switch (get_highest_layer(default_layer_state)) {
-    case _COLEMAKDHM:
+        case _COLEMAKDHM:
-      oled_write_P(PSTR("CLMK "), false);
+            oled_write_P(PSTR("TYPE "), false);
-      break;
+            break;
-    case _GAMING:
+        case _GAMING:
-      oled_write_P(PSTR("GAME "), false);
+            oled_write_P(PSTR("GAME "), false);
-      break;
+            break;
-  }
+    }
 
-  oled_write_P(PSTR("\n"), false);
+    oled_write_P(PSTR("\n"), false);
 
-  switch (get_highest_layer(layer_state)) {
+    switch (get_highest_layer(layer_state)) {
-    case 0:
+        case 0:
-      oled_write_P(PSTR("     "), false);
+            oled_write_P(PSTR("     "), false);
-      break;
+            break;
-    case _NUM:
+        case _SYM:
-      oled_write_P(PSTR("Comm "), false);
+            oled_write_P(PSTR("Sym  "), false);
-      break;
+            break;
-    case _FN:
+        case _NAV:
-      oled_write_P(PSTR("Stage"), false);
+            oled_write_P(PSTR("Nav  "), false);
-      break;
+            break;
-    case _NAV:
+        case _GAMING_EXT:
-      oled_write_P(PSTR("Fuel "), false);
+            oled_write_P(PSTR("Ext  "), false);
-      break;
+            break;
-    case _GAMING_EXT:
+        case _NUMPAD:
-      oled_write_P(PSTR("Ext  "), false);
+            oled_write_P(PSTR("Num  "), false);
-      break;
+            break;
-    case _UTIL:
+        case _UTIL:
-      oled_write_P(PSTR("Util "), false);
+            oled_write_P(PSTR("Util "), false);
-      break;
+            break;
-    default:
+        default:
-      oled_write_P(PSTR("Unkn "), false);
+            oled_write_P(PSTR("Unkn "), false);
-      break;
+            break;
-  }
+    }
-  oled_write_P(PSTR("\n"), false);
+    oled_write_P(PSTR("\n"), false);
 
-  uint8_t modifiers = get_mods();
+    uint8_t modifiers = get_mods();
 
-  oled_write_P( (modifiers & MOD_MASK_CTRL)  ? PSTR("PROG ") : PSTR("     "), false);
+    oled_write_P((modifiers & MOD_MASK_SHIFT) ? PSTR("SHIFT") : PSTR("\n"), false);
-  oled_write_P( (modifiers & MOD_MASK_SHIFT) ? PSTR("PULSE") : PSTR("     "), false);
+    oled_write_P((modifiers & MOD_MASK_CTRL) ? PSTR("CTRL ") : PSTR("\n"), false);
-  oled_write_P( (modifiers & MOD_MASK_ALT)   ? PSTR("STBY ") : PSTR("     "), false);
+    oled_write_P((modifiers & MOD_MASK_ALT) ? PSTR("ALT  ") : PSTR("\n"), false);
-  oled_write_P( (modifiers & MOD_MASK_GUI)   ? PSTR("GYRO ") : PSTR("     "), false);
+    oled_write_P((modifiers & MOD_MASK_GUI) ? PSTR("SUPER") : PSTR("\n"), false);
 
-  oled_write_P(PSTR("\n"), false);
+    oled_write_P(PSTR("\n"), false);
 
-  uint8_t led_usb_state = host_keyboard_leds();
+    uint8_t led_usb_state = host_keyboard_leds();
-  oled_write_P(PSTR("Mode:\n"), false);
+    oled_write_P(PSTR("Mode:"), false);
-  oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK)    ? PSTR(" NUM ") : PSTR("     "), false);
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR(" NUM ") : PSTR("\n"), false);
-  oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK)   ? PSTR(" CAPS") : PSTR("     "), false);
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR(" CAPS") : PSTR("\n"), false);
-  oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR(" SCRL") : PSTR("     "), false);
+
+#    ifdef RGB_MATRIX_ENABLE
+    oled_write_P(PSTR("\n"), false);
+    oled_write_P(PSTR("\n"), false);
+
+    if (rgb_matrix_config.enable) {
+        if (user_config.rgb_matrix_idle_anim) {
+            oled_write_P(rgb_matrix_anim_oled_text(user_config.rgb_matrix_active_mode), false);
+            oled_write_P(rgb_matrix_anim_oled_text(user_config.rgb_matrix_idle_mode), false);
+        } else {
+            oled_write_P(PSTR("\n"), false);
+            oled_write_P(rgb_matrix_anim_oled_text(rgb_matrix_get_mode()), false);
+        }
+      } else {
+        oled_write_P(PSTR("\n"), false);
+        oled_write_P(PSTR("\n"), false);
+      }
+#    endif
 }
 
 void oled_task_user(void) {
-  if (is_master) {
+    if (timer_elapsed32(oled_timer) > OLED_TIMEOUT) {
-    render_status();     // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+        oled_off();
-  } else {
+        return;
-    render_crkbd_logo();
+    } else {
-    // oled_scroll_left();  // Turns on scrolling
+        oled_on();
-  }
+    }
+
+    if (is_master) {
+        render_status();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_crkbd_logo();
+        #ifdef RGB_MATRIX_ENABLE
+            if (user_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == user_config.rgb_matrix_idle_mode) {
+                oled_scroll_left();  // Turns on scrolling
+            } else {
+              oled_scroll_off();
+            }
+        #endif
+    }
+}
+#endif
+
+#ifdef RGB_MATRIX_ENABLE
+
+extern led_config_t g_led_config;
+void rgb_matrix_layer_helper(uint8_t hue, uint8_t sat, uint8_t val, uint8_t led_type) {
+    HSV hsv = {hue, sat, val};
+    if (hsv.v > rgb_matrix_config.hsv.v) {
+        hsv.v = rgb_matrix_config.hsv.v;
+    }
+
+    RGB rgb = hsv_to_rgb(hsv);
+    for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
+        if (HAS_FLAGS(g_led_config.flags[i], led_type)) {
+            rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
+        }
+    }
+}
+
+void check_default_layer(uint8_t type) {
+    switch (get_highest_layer(default_layer_state)) {
+        case _COLEMAKDHM:
+            rgb_matrix_layer_helper(THEME_HSV, type);
+            break;
+        case _GAMING:
+            rgb_matrix_layer_helper(HSV_RED, type);
+            break;
+    }
+}
+
+void rgb_matrix_indicators_user(void) {
+  if (
+    user_config.rgb_layer_change && !g_suspend_state && rgb_matrix_config.enable &&
+      (!user_config.rgb_matrix_idle_anim || rgb_matrix_get_mode() != user_config.rgb_matrix_idle_mode)
+  )
+    {
+        switch (get_highest_layer(layer_state)) {
+            case _GAMING_EXT:
+                rgb_matrix_layer_helper(HSV_PURPLE, LED_FLAG_UNDERGLOW);
+                break;
+            case _SYM:
+                rgb_matrix_layer_helper(HSV_GOLDENROD, LED_FLAG_UNDERGLOW);
+                break;
+            case _NAV:
+                rgb_matrix_layer_helper(HSV_SPRINGGREEN, LED_FLAG_UNDERGLOW);
+                break;
+            case _UTIL:
+                rgb_matrix_layer_helper(HSV_PINK, LED_FLAG_UNDERGLOW);
+                break;
+            case _NUMPAD:
+                rgb_matrix_layer_helper(HSV_CORAL, LED_FLAG_UNDERGLOW);
+                break;
+            default: {
+                check_default_layer(LED_FLAG_UNDERGLOW);
+                break;
+            }
+        }
+    }
+}
+
+void rgb_matrix_update_current_mode(uint8_t mode, uint8_t speed) {
+    rgb_matrix_config.speed = speed;
+    rgb_matrix_mode_noeeprom(mode);
+    eeconfig_update_user(user_config.raw);
+}
+
+void rgb_matrix_update_dynamic_mode(uint8_t mode, uint8_t speed, bool active) {
+    if (active) {
+        user_config.rgb_matrix_active_speed = speed;
+        user_config.rgb_matrix_active_mode  = mode;
+    } else {
+        user_config.rgb_matrix_idle_speed = speed;
+        user_config.rgb_matrix_idle_mode  = mode;
+    }
+}
+
+void rgb_matrix_update_mode(uint8_t mode, uint8_t speed, bool active) {
+    if (user_config.rgb_matrix_idle_anim) {
+        rgb_matrix_update_dynamic_mode(mode, speed, active);
+    }
+    if (active || !user_config.rgb_matrix_idle_anim) {
+        rgb_matrix_update_current_mode(mode, speed);
+    }
+}
+
+void rgb_matrix_set_defaults(void) {
+    rgb_matrix_config.enable = 1;
+    rgb_matrix_sethsv_noeeprom(THEME_HSV);
+
+    user_config.rgb_layer_change        = false;
+    user_config.rgb_matrix_idle_anim    = true;
+    user_config.rgb_matrix_idle_timeout = 60000;
+
+    rgb_matrix_update_dynamic_mode(RGB_MATRIX_CYCLE_ALL, RGB_MATRIX_ANIMATION_SPEED_SLOWER, false);
+    rgb_matrix_update_dynamic_mode(RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS, RGB_MATRIX_ANIMATION_SPEED_DEFAULT, true);
+
+    eeprom_update_block(&rgb_matrix_config, EECONFIG_RGB_MATRIX, sizeof(rgb_matrix_config));
+}
+
+void matrix_scan_rgb(void) {
+    if (user_config.rgb_matrix_idle_anim && rgb_matrix_get_mode() == user_config.rgb_matrix_active_mode && timer_elapsed32(hypno_timer) > user_config.rgb_matrix_idle_timeout) {
+        if (user_config.rgb_layer_change) {
+            rgb_matrix_layer_helper(0, 0, 0, LED_FLAG_UNDERGLOW);
+        }
+        rgb_matrix_update_current_mode(user_config.rgb_matrix_idle_mode, user_config.rgb_matrix_idle_speed);
+    }
+}
+
+void matrix_scan_user(void) {
+    static bool has_ran_yet;
+    if (!has_ran_yet) {
+        has_ran_yet = true;
+        startup_user();
+    }
+    matrix_scan_rgb();
+}
+
+void eeconfig_init_user(void) {
+    user_config.raw = 0;
+    rgb_matrix_mode_noeeprom(user_config.rgb_matrix_active_mode);
+    keyboard_init();
+}
+
+void keyboard_post_init_user(void) {
+    user_config.raw = eeconfig_read_user();
+    rgb_matrix_set_defaults();
+    rgb_matrix_enable_noeeprom();
 }
 #endif
 
 void suspend_power_down_keymap(void) {
+    oled_off();
     rgb_matrix_set_suspend_state(true);
 }
 
 void suspend_wakeup_init_keymap(void) {
+    oled_on();
     rgb_matrix_set_suspend_state(false);
 }
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    static uint8_t saved_mods   = 0;
+    uint16_t       temp_keycode = keycode;
+
+    oled_timer = timer_read32();
+
+#ifdef RGB_MATRIX_ENABLE
+    if (user_config.rgb_matrix_idle_anim) {
+        hypno_timer = timer_read32();
+        if (rgb_matrix_get_mode() == user_config.rgb_matrix_idle_mode) {
+            rgb_matrix_update_current_mode(user_config.rgb_matrix_active_mode, user_config.rgb_matrix_active_speed);
+            if (!user_config.rgb_layer_change) {
+                rgb_matrix_layer_helper(0, 0, 0, LED_FLAG_UNDERGLOW);
+            }
+        }
+    }
+#endif
+
+    // Filter out the actual keycode from MT and LT keys.
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) {
+        temp_keycode &= 0xFF;
+    }
+
+    switch (temp_keycode) {
+        case BSP_DEL:
+            if (record->event.pressed) {
+                saved_mods = get_mods() & MOD_MASK_SHIFT;
+
+                if (saved_mods == MOD_MASK_SHIFT) {  // Both shifts pressed
+                    register_code(KC_DEL);
+                } else if (saved_mods) {   // One shift pressed
+                    del_mods(saved_mods);  // Remove any Shifts present
+                    register_code(KC_DEL);
+                    add_mods(saved_mods);  // Add shifts again
+                } else {
+                    register_code(KC_BSPC);
+                }
+            } else {
+                unregister_code(KC_DEL);
+                unregister_code(KC_BSPC);
+            }
+            return false;
+#ifdef RGB_MATRIX_ENABLE
+        case COLEMAK:
+            if (record->event.pressed) {
+                user_config.rgb_matrix_idle_timeout = 60000;
+                rgb_matrix_update_mode(RGB_MATRIX_CYCLE_ALL, RGB_MATRIX_ANIMATION_SPEED_SLOWER, false);
+            }
+            return true;
+        case GAMING:
+            if (record->event.pressed) {
+                if (!user_config.rgb_layer_change) {
+                    user_config.rgb_layer_change = true;
+                }
+                user_config.rgb_matrix_idle_timeout = 10000;
+                rgb_matrix_update_mode(RGB_MATRIX_RAINBOW_PINWHEELS, RGB_MATRIX_ANIMATION_SPEED_SLOW, false);
+            }
+            return true;
+        case RGB_RST:
+            if (record->event.pressed) {
+                rgb_matrix_set_defaults();
+                rgb_matrix_enable();
+            }
+            break;
+        case RGB_UND:  // Toggle separate underglow status
+            if (record->event.pressed) {
+                user_config.rgb_layer_change ^= 1;
+                eeconfig_update_user(user_config.raw);
+                if (user_config.rgb_layer_change) {
+                    layer_state_set(layer_state);  // This is needed to immediately set the layer color (looks better)
+                } else {
+                    rgb_matrix_layer_helper(0, 0, 0, LED_FLAG_UNDERGLOW);
+                }
+            }
+            break;
+        case RGB_IDL:  // Toggle idle/heatmap animation
+            if (record->event.pressed) {
+                user_config.rgb_matrix_idle_anim ^= 1;
+                if (user_config.rgb_matrix_idle_anim) {
+                    rgb_matrix_update_mode(user_config.rgb_matrix_active_mode, user_config.rgb_matrix_active_speed, true);
+                } else {
+                    rgb_matrix_update_current_mode(user_config.rgb_matrix_idle_mode, user_config.rgb_matrix_idle_speed);
+                }
+            }
+            break;
+        case RGB_MAP:
+            if (record->event.pressed) {
+                rgb_matrix_update_mode(RGB_MATRIX_TYPING_HEATMAP, rgb_matrix_config.speed, true);
+            }
+            break;
+        case RGB_NXS:
+            if (record->event.pressed) {
+                rgb_matrix_update_mode(RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS, RGB_MATRIX_ANIMATION_SPEED_DEFAULT, true);
+            }
+            break;
+        case RGB_SOL:
+            if (record->event.pressed) {
+                rgb_matrix_update_mode(RGB_MATRIX_SOLID_COLOR, rgb_matrix_config.speed, false);
+            }
+            break;
+        case RGB_CYC:
+            if (record->event.pressed) {
+                rgb_matrix_update_mode(RGB_MATRIX_CYCLE_ALL, RGB_MATRIX_ANIMATION_SPEED_SLOWER, false);
+            }
+            break;
+        case RGB_DUO:
+            if (record->event.pressed) {
+                rgb_matrix_update_mode(RGB_MATRIX_RAINBOW_PINWHEELS, RGB_MATRIX_ANIMATION_SPEED_SLOW, false);
+            }
+            break;
+        case RGB_SCR:
+            if (record->event.pressed) {
+                rgb_matrix_update_mode(RGB_MATRIX_CYCLE_LEFT_RIGHT, RGB_MATRIX_ANIMATION_SPEED_SLOW, false);
+            }
+            break;
+#endif
+    }
+    return true;
+}

keyboards/crkbd/keymaps/rpbaptist/readme.md

@@ -10,27 +10,29 @@ Many thanks to foostan for the keyboard, all QMK contributors and drashna specif
 
 ### COLEMAKDHM
 
-Main typing layer. I really love having SHIFT available on thumbs. I am a left thumb space bar person, so I put SPACE there and ENTER on right. I use CTRL key combos lot in my text editor and desktop environment. That's why I have two of them. I also found them to be a great position for the square brackets. (`[` and `]`)
+Main typing layer. I really love having SHIFT available on thumbs. I am a left thumb space bar person, so I put SPACE there and ENTER on right. I use CTRL key combos lot in my text editor and desktop environment. That's why I have two of them. I also found them to be a great position for the square brackets. (`[` and `]`). These become parenthesis (`(` and `)`) on either of the layers.
 
-I don't know about you but "lower" and "raise" don't mean that much to me. I named my layers `NUM`, short for numbers and `NAV`, short for navigation. Holding the key will activate the layer for as long as it is held, double tapping it will switch to it. Single tapping it once will switch to main layer again.
+Holding SHIFT while tapping BACKSPACE will output DEL. Holding both SHIFT keys will output SHIFT+DEL.
 
-Everything else is pretty standard I'd say.
+I don't know about you but "lower" and "raise" don't mean that much to me. I named my layers `SYM`, short for symbols and `NAV`, short for navigation. Holding the key will activate the layer for as long as it is held, double tapping it will switch to it. Single tapping it once will switch to main layer again.
 
-### NUM
+Holding TAB will access `NUM` layer which features a numpad.
+
+### SYM
 
 Includes a number row, the symbols normally on SHIFT and numbers, as well as a numpad under right side homing keys.
 
 ### NAV
 
-This is where I access arrow keys, page up, down, home, end and mouse control. I also added general tab forward and backward keys. I use these in my browser, terminal and text editor. 
+This is where I access arrow keys, page up, down, home, end and F keys. I also added general tab forward and backward keys. Tab close and window close. I primarily use these in my browser, terminal and text editor.
-
-## FN
-
-Short for function. This gives access to the function keys, as well as rarely used keys on the left side and often used symbols (for me) on the right side. It is accessed by holding TAB.
 
 ### UTIL
 
-Short for utility. This is accessed by pressing both `NUM` and `NAV` at the same time. It has a software `RESET` key, media keys, RGB control and switches main layer between Colemak and a gaming layer.
+Short for utility. This is accessed by pressing both `SYM` and `NAV` at the same time. It has a software `RESET` key, media keys, RGB control and switches main layer between Colemak and a gaming layer.
+
+### NUMPAD
+
+This gives access to a numpad on the right half with some additional symbols I find useful when using the numpad.
 
 ### GAMING
 
@@ -38,20 +40,33 @@ Sometimes I switch to type in Discord, Steam, or in game chat, so I think it's m
 
 I put movement on FRST (would be ESDF on QWERTY), because it lines up more comfortably with the columnar staggered layout of the Corne. It also gives more easy access to all keys on left half.
 
-Most notable here is that there are no tap and hold differences anymore on left hand side besides the new layer key. This is a different layer than `NUM`. 
+Most notable here is that there are no tap and hold differences anymore on left hand side besides the new layer key. This is a different layer than `SYM`.
 
 ### GAMING_EXT
 
-This is the gaming extended layer where movement keys remain the same. This means I can keep moving while accessing second layer keys. All other keys are keys on which I can easily rebind something. Besides that it gives me the function keys and an ENTER key which does not change. This is good when a game requires you to hold ENTER.
+This is the gaming extended layer where movement keys remain the same. This means I can keep moving while accessing second layer keys. All other keys are keys on which I can easily rebind something. Besides that it gives me an ENTER key which does not switch. This is good when a game requires you to hold ENTER.
 
-## Notes
+## RGB
 
-I use MT3 Godspeed caps and thought it would be fun to theme the OLED output towards it. The slave side has the icon and two planets. The left side refers to modifiers by matching the novelty mod legends.
+I took a big inspiration from Drashna's RGB configuration and tweaked it.
+
+- `RGB_UND`: Toggles underglow indicators on and off. Each layer has its own color.
+- `RGB_IDL`: This will enable/disable idle mode. By default, when typing, the `DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS` will be used. When the idle timeout has exceeded the secondary animation will be activated, which is `RGB_MATRIX_CYCLE_ALL` by default. When switching to `GAMING` layer the timeout will be reduced and the idle animation changed to `RGB_MATRIX_RAINBOW_PINWHEELS`.
+   When idle mode is enabled, `RGB_MATRIX_TYPING_HEATMAP` and `RGB_MATRIX_MULTISPLASH` will be used for active animation. All others for idle animation. When disabling idle mode, the current idle animation will be activated. Additionally, on idling, the underglow layer indication will be deactivated.
+- There are no RGB mode cycle keys, but instead several keys to use a specific RGB directly. Each has their own default speed, although this can be changed.
 
 ## Building
 
-I am using DFU and have to flash both halves individually.
+`make crkbd/rev1:rpbaptist:dfu`
 
-Left half: `make crkbd/rev1:rpbaptist:dfu-split-left`
+## Notes
 
-Right half: `make crkbd/rev1:rpbaptist:dfu-split-right RGB_MATRIX_SPLIT_RIGHT=yes`
+I use several OLED slave side images, depending on the keycaps I am using. These also determine the default LED color and underglow.
+
+`make crkbd/rev1:rpbaptist:dfu THEME=pulse`
+
+Current supported themes are:
+
+- godspeed
+- laser
+- pulse

keyboards/crkbd/keymaps/rpbaptist/rules.mk

@@ -1,15 +1,16 @@
-# This enables Link Time Optimization. This can save a good chunk of space (several KB for me), but the macro and function ... functions cause it to error out.
+#This enables Link Time Optimization.This can save a good chunk of space(several KB for me), but the macro and function... functions cause it to error out.
 LINK_TIME_OPTIMIZATION_ENABLE = yes
 
-# Build Options
+#Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
+#change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
+#the appropriate keymap folder that will get included automatically
 #
-MOUSEKEY_ENABLE    = yes  # Mouse keys(+4700)
 EXTRAKEY_ENABLE    = yes  # Audio control and System control(+450)
 NKRO_ENABLE        = yes  # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# DYNAMIC_MACRO_ENABLE = yes
 
-RGBLIGHT_ENABLE    = no  # Enable WS2812 RGB underlight.
+MOUSEKEY_ENABLE    = no   # Mouse keys(+4700)
+RGBLIGHT_ENABLE    = no   # Enable WS2812 RGB underlight.
 BOOTMAGIC_ENABLE   = no   # Virtual DIP switch configuration(+1000)
 CONSOLE_ENABLE     = no   # Console for debug(+400)
 COMMAND_ENABLE     = no   # Commands for debug and configuration
@@ -22,13 +23,21 @@ SWAP_HANDS_ENABLE  = no   # Enable one-hand typing
 
 RGB_MATRIX_ENABLE = WS2812
 
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+#Do not enable SLEEP_LED_ENABLE.it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE   = no    # Breathing sleep LED during USB suspend
 
 BOOTLOADER       = qmk-dfu
 
 OLED_DRIVER_ENABLE = yes
 
-# ifneq ($(strip $(OLED_DRIVER_ENABLE)), yes)
+ifeq ($(strip $(THEME)), godspeed)
-#     RGB_MATRIX_SPLIT_RIGHT=yes
+    OPT_DEFS += -DTHEME_GODSPEED
-# endif
+endif
+
+ifeq ($(strip $(THEME)), pulse)
+    OPT_DEFS += -DTHEME_PULSE
+endif
+
+ifeq ($(strip $(THEME)), laser)
+    OPT_DEFS += -DTHEME_LASER
+endif

keyboards/cu80/rules.mk

@@ -14,7 +14,7 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug

keyboards/db/db63/config.h

@@ -37,7 +37,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLED_NUM 18
 #define RGBLIGHT_ANIMATIONS
 
-#define NO_UART 1
-
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3

keyboards/dztech/dz60rgb/keymaps/via/keymap.c

@@ -0,0 +1,39 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_GESC,        KC_1,    KC_2,            KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,         KC_EQL,  KC_BSPC,
+        KC_TAB,         KC_Q,    KC_W,            KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,         KC_RBRC, KC_BSLS,
+        CTL_T(KC_CAPS), KC_A,    KC_S,            KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                  KC_ENT,
+        KC_LSFT,                 KC_Z,            KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  RSFT_T(KC_SLSH), KC_UP,   LT(2, KC_DEL),
+        KC_LCTL,        KC_LGUI, LM(1, MOD_LALT),                            KC_SPC,                    KC_RALT, MO(1),   KC_LEFT,         KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT(
+        TO(3),   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, _______, KC_UP,   _______, _______, _______, KC_CALC, _______, KC_INS,  _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP,          EEP_RST,
+        _______,          _______, _______, _______, _______, _______, NK_TOGG, _______, _______, KC_END,  KC_PGDN, KC_VOLU, KC_MUTE,
+        _______, _______, _______,                            TO(4),                     _______, _______, KC_MPRV, KC_VOLD, KC_MNXT
+    ),
+    [2] = LAYOUT(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, RGB_TOG, _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, _______, _______, _______, RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, RGB_SPD, _______, _______,          EEP_RST,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______, _______, _______, _______
+    ),
+    [3] = LAYOUT(
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_PPLS, _______, _______, _______, _______, KC_PSLS, KC_PAST, KC_PMNS, KC_PPLS, _______,
+        _______, KC_P7,   KC_P8,   KC_P9,   _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   _______, _______, TO(0),
+        _______, KC_P4,   KC_P5,   KC_P6,   _______, _______, _______, _______, KC_P4,   KC_P5,   KC_P6,   _______,          KC_PENT,
+        _______,          KC_P1,   KC_P2,   KC_P3,   _______, _______, _______, _______, KC_P1,   KC_P2,   KC_P3,   _______, _______,
+        _______, KC_P0,   KC_PDOT,                            KC_PENT,                   KC_P0,   KC_PDOT, _______, _______, _______
+    ),
+    [4] = LAYOUT(
+        KC_GESC,        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,         KC_EQL,  KC_BSPC,
+        KC_TAB,         KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,         KC_RBRC, KC_BSLS,
+        CTL_T(KC_CAPS), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                  KC_ENT,
+        KC_LSFT,                 KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  RSFT_T(KC_SLSH), KC_UP,   LT(2, KC_DEL),
+        KC_LCTL,        KC_LALT, KC_LGUI,                            KC_SPC,                    KC_RALT, TO(0),   KC_LEFT,         KC_DOWN, KC_RGHT
+    )
+};

keyboards/dztech/dz60rgb/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/dztech/dz60rgb/v1/config.h

@@ -1,8 +1,8 @@
 #pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x445A
-#define PRODUCT_ID      0x1219
+#define PRODUCT_ID      0x1120
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    DZTECH
 #define PRODUCT         DZ60RGB

keyboards/dztech/dz60rgb/v2/config.h

@@ -1,8 +1,8 @@
 #pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x445A
-#define PRODUCT_ID      0x1219
+#define PRODUCT_ID      0x1121
 #define DEVICE_VER      0x0002
 #define MANUFACTURER    DZTECH
 #define PRODUCT         DZ60RGB

keyboards/dztech/dz60rgb_wkl/keymaps/via/keymap.c

@@ -0,0 +1,32 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_60_tsangan_hhkb(
+        KC_GESC,        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
+        KC_TAB,         KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+        CTL_T(KC_CAPS), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,                 KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(2),
+        KC_LCTL,        KC_LGUI, KC_LALT,                            KC_SPC,                                      KC_RALT, MO(1),   KC_RCTL
+    ),
+    [1] = LAYOUT_60_tsangan_hhkb(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, _______, KC_UP,   _______, _______, _______, KC_CALC, _______, KC_INS,  _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP,          _______,
+        KC_MPRV,          KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, NK_TOGG, _______, _______, KC_END,  KC_PGDN, KC_MNXT, _______,
+        _______, _______, _______,                            _______,                                     _______, _______, _______
+    ),
+    [2] = LAYOUT_60_tsangan_hhkb(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  _______,
+        _______, RGB_TOG, _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, _______, _______, _______, RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, RGB_SPD, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                                     _______, _______, _______
+    ),
+    [3] = LAYOUT_60_tsangan_hhkb(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                                     _______, _______, _______
+    )
+};

keyboards/dztech/dz60rgb_wkl/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/dztech/dz60rgb_wkl/v1/config.h

@@ -1,8 +1,8 @@
 #pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x445A
-#define PRODUCT_ID      0x1221
+#define PRODUCT_ID      0x1320
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    DZTECH
 #define PRODUCT         DZ60RGB_WKL

keyboards/dztech/dz60rgb_wkl/v2/config.h

@@ -1,8 +1,8 @@
 #pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x445A
-#define PRODUCT_ID      0x1221
+#define PRODUCT_ID      0x1321
 #define DEVICE_VER      0x0002
 #define MANUFACTURER    DZTECH
 #define PRODUCT         DZ60RGB_WKL

keyboards/dztech/dz65rgb/keymaps/via/keymap.c

@@ -0,0 +1,32 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_65_ansi(
+        KC_GESC,        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME,
+        KC_TAB,         KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+        CTL_T(KC_CAPS), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGDN,
+        KC_LSFT,                 KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_END,
+        KC_LCTL,        KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),   KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_65_ansi(
+        KC_GESC,        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_HOME,
+        _______,        RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,   KC_PGUP,
+        CTL_T(KC_CAPS), RGB_SPI, RGB_SPD, _______, _______, _______, _______, _______, _______, _______, _______, _______,          EEP_RST, KC_PGDN,
+        KC_LSFT,                 _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, KC_VOLU, KC_MUTE,
+        _______,        _______, _______,                            _______,                   _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT
+    ),
+    [2] = LAYOUT_65_ansi(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______, _______, _______, _______, _______
+    ),
+    [3] = LAYOUT_65_ansi(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                   _______, _______, _______, _______, _______, _______
+    )
+};

keyboards/dztech/dz65rgb/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/dztech/dz65rgb/v1/config.h

@@ -1,8 +1,8 @@
 #pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x445A
-#define PRODUCT_ID      0x1222
+#define PRODUCT_ID      0x1420
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    DZTECH
 #define PRODUCT         DZ65RGB

keyboards/dztech/dz65rgb/v2/config.h

@@ -1,8 +1,8 @@
 #pragma once
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x445A
-#define PRODUCT_ID      0x1222
+#define PRODUCT_ID      0x1421
 #define DEVICE_VER      0x0002
 #define MANUFACTURER    DZTECH
 #define PRODUCT         DZ65RGB

keyboards/exent/config.h

@@ -44,8 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBLIGHT_ANIMATIONS
 
-#define NO_UART 1
-
 /* key combination for magic key command */
 /* defined by default; to change, uncomment and set to the combination you want */
 // #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)

keyboards/ft/mars80/config.h

@@ -43,8 +43,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBLIGHT_ANIMATIONS
 
-#define NO_UART 1
-
 /* key combination for magic key command */
 /* defined by default; to change, uncomment and set to the combination you want */
 // #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/gingham/config.h

@@ -50,7 +50,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-#define NO_UART 1
 #define USB_MAX_POWER_CONSUMPTION 100
 
 /*

keyboards/handwired/prkl30/feather/config.h

@@ -0,0 +1,51 @@
+/* Copyright 2020 Erkki Halinen & Toni Johansson
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xE0E0
+#define PRODUCT_ID      0x0030
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Ergorius & Tooni Skyy
+#define PRODUCT         PRKL30
+#define DESCRIPTION     30% Mechanical keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 10
+
+/* PRKL30 feather pinout */
+#define MATRIX_ROW_PINS { F4, F1, F0, D2}
+#define MATRIX_COL_PINS { D3, D1, B7, D6, C7, B6, B5, D7, C6, D0}
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+#define ENCODERS_PAD_A { F7 }
+#define ENCODERS_PAD_B { F6 }
+#define ENCODER_RESOLUTION 4
+#define AdafruitBleResetPin D4
+#define AdafruitBleCSPin B4
+#define AdafruitBleIRQPin E6
+#define UNUSED_PINS
+
+/* RGB Light Configuration */
+
+#define RGB_DI_PIN D1
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 13
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8

keyboards/handwired/prkl30/feather/rules.mk

@@ -0,0 +1,31 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency
+F_CPU = 8000000
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BLUETOOTH = AdafruitBLE
+BOOTMAGIC_ENABLE  = yes     # Virtual DIP switch configuration
+ENCODER_ENABLE = yes
+MOUSEKEY_ENABLE  = no       # Mouse keys
+EXTRAKEY_ENABLE  = no       # Audio control and System control
+CONSOLE_ENABLE  = yes       # Console for debug
+COMMAND_ENABLE  = yes       # Commands for debug and configuration
+SLEEP_LED_ENABLE  = no      # Breathing sleep LED during USB suspend
+NKRO_ENABLE  = yes          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE  = no
+AUDIO_ENABLE  = no          # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE  = no       # This can be enabled if a ws2812 strip is connected to the expansion port.

keyboards/handwired/prkl30/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "prkl30",
+    "url": "https://github.com/ErkHal/prkl30",
+    "maintainer": "ErkHal",
+    "width": 13.5,
+    "height": 3,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0, "w":1.5}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12.25, "y":1, "w":1.25, "h":2}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2, "w":1.25}]
+        },
+        "LAYOUT_2u_space": {
+             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0, "w":1.5}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12.25, "y":1, "w":1.25, "h":2}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2, "w":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2, "w":1.25}]
+        }
+    }
+}

keyboards/handwired/prkl30/keymaps/default/keymap.c

@@ -0,0 +1,102 @@
+#include QMK_KEYBOARD_H
+#include "keymap_nordic.h"
+enum layers {
+  _DEFAULT,
+  _LOWER,
+  _RAISE,
+  _FN
+};
+
+enum custom_keycodes {
+    PRKL = SAFE_RANGE,
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+#define FN MO(_FN)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Default
+ * ,-----------------------------------------------------------------------------------.------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |  ¨^  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|------|
+ * |  Tab |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   Ö  |  Ä   | Entr |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|------'
+ * | Shift|   Z  |   X  |   C  |   V  |    Space    |   B  |   N  |   M  |   ,  |   .  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------'
+ */
+[_DEFAULT] = LAYOUT_all(
+    KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,               KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    NO_QUOT, KC_BSPC,
+    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,               KC_H,    KC_J,    KC_K,    KC_L,    NO_AE,   NO_OSLH, LT(_FN, KC_ENT),
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    LT(_LOWER, KC_SPC), _______, KC_B,    KC_N,    KC_M,    KC_COMM, LT(_RAISE, KC_DOT)
+),
+
+/* Lower - Numbers and some symbols
+ * ,------------------------------------------------------------------------------------------.
+ * |   ~  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0   |  +  | DEL  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|------'
+ * |      |      |      |      |      |             |      |      |      |  -   |      |
+ * `------+------+------+------+------+------+------+------+------+------+------+------'
+ */
+[_LOWER] = LAYOUT_all(
+    KC_TILD, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    NO_PLUS, KC_DEL,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NO_MINS, _______
+),
+
+/* Raise - AltGred Characters and more symbols
+ * ,------------------------------------------------------------------------------------------.
+ * |   ~  |   >  |   @  |   £  |   $  |   %  |   &  |   |  |   [  |   ]  |   ≈  | ?    | {    |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|------|
+ * |      |      |      |  UP  |      |      |      |      |      |      |      |      | }    |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|------'
+ * |      |   <  | LEFT | DOWN | RIGHT|             |      |      |      |      |      |
+ * `------+------+------+------+------+------+------+------+------+------+------+------'
+ */
+[_RAISE] = LAYOUT_all(
+    NO_TILD, NO_SECT, NO_AT,   NO_PND,  NO_DLR,  KC_PERC, NO_AMPR, NO_LCBR, NO_LBRC, NO_RBRC, NO_RCBR, NO_QUES, LSFT(NO_LBRC),
+    _______, _______, _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, LSFT(NO_RBRC),
+    _______, NO_HALF, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______
+),
+
+ /* FN
+ * ,------------------------------------------------------------------------------------------.
+ * |RESET |   F1 |   F2 |   F3 |   F4 |   F5 |   F6 |   F7 |   F8 |   F9 |  F10 |  F11 | F12  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|------|
+ * |      |RGB_P |RGB_HD|RGB_HI| VOL- | PREV | NEXT | VOL+ |      |      |      | PRKL |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|------'
+ * | RGB_M|RGB_VD|RGB_VI|RGB_TG|      | PLAY/PAUSE  |      |      |      |LCA(DEL)|    |
+ * `------+------+------+------+------+------+------+------+------+------+------+------'
+ */
+[_FN] = LAYOUT_all(
+    RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+    _______, RGB_M_P, RGB_HUD, RGB_HUI, KC_VOLD, KC_MPRV, KC_MNXT, KC_VOLU, _______, _______, _______, PRKL,    _______,
+    RGB_MOD, RGB_VAD, RGB_VAI, RGB_TOG, _______, KC_MPLY, _______, _______, _______, _______, LCA(KC_DEL), _______
+),
+
+
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (clockwise) {
+      tap_code(KC_TAB);
+    } else {
+      tap_code(KC_PGUP);
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case PRKL:
+      if (record->event.pressed) {
+        //When PRKL is pressed, print out the holy power word of our people
+        SEND_STRING("PERKELE");
+      }
+      break;
+  }
+  return true;
+};

keyboards/handwired/prkl30/keymaps/default/readme.md

@@ -0,0 +1,26 @@
+# The default keymap for PRKL30
+
+## Note !
+Due to the main target audience being a small Finnish community, 
+this board's default layout uses nordic keycodes.
+-----
+
+
+![prkl30 default layout image](https://i.imgur.com/tekFaHW.png "default")
+
+default layout
+
+
+![prkl30 lower layout image](https://i.imgur.com/NzLcXrU.png "lower")
+
+lower layout
+
+
+![prkl30 raise layout image](https://i.imgur.com/BpC8T6p.png "raise")
+
+raise layout
+
+
+![prkl30 fn layout image](https://i.imgur.com/gwgIKqj.png "fn")
+
+fn layout

keyboards/handwired/prkl30/prkl30.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 ErkHal
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "prkl30.h"

keyboards/handwired/prkl30/prkl30.h

@@ -0,0 +1,40 @@
+/* Copyright 2020 Erkki Halinen & Toni Johansson
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, \
+    k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, \
+    k27, k28, k29, k30, k31, k32, k33, k34, k35, k36, k37, k38 \
+) { \
+    { k01, k02, k03, k04, k05, k06, k07, k08, k09,   k10   }, \
+    { k14, k15, k16, k17, k18, k19, k20, k21, k22,   k23   }, \
+    { k27, k28, k29, k30, k31, k32, k33, k34, k35,   k36   }, \
+    { k11, k12, k13, k24, k25, k26, k37, k38, KC_NO, KC_NO } \
+}
+
+#define LAYOUT_2u_space( \
+    k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, \
+    k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, \
+    k27, k28, k29, k30, k31,   k32,    k34, k35, k36, k37, k38 \
+) { \
+    { k01, k02, k03, k04, k05, k06, k07,   k08, k09,   k10   }, \
+    { k14, k15, k16, k17, k18, k19, k20,   k21, k22,   k23   }, \
+    { k27, k28, k29, k30, k31, k32, KC_NO, k34, k35,   k36   }, \
+    { k11, k12, k13, k24, k25, k26, k37,   k38, KC_NO, KC_NO } \
+}

keyboards/handwired/prkl30/promicro/config.h

@@ -0,0 +1,48 @@
+/* Copyright 2020 Erkki Halinen & Toni Johansson
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xE0E0
+#define PRODUCT_ID      0x0030
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Ergorius & Tooni Skyy
+#define PRODUCT         PRKL30
+#define DESCRIPTION     30% Mechanical keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 10
+
+/* prkl30 default pinout */
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { B4, B5, F6, F5, F4, F7, B1, B3, B2, B6}
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+#define ENCODERS_PAD_A { D3 }
+#define ENCODERS_PAD_B { D2 }
+#define ENCODER_RESOLUTION 4
+#define UNUSED_PINS
+
+/* RGB Light Configuration */
+
+#define RGB_DI_PIN D1
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 13
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8

keyboards/handwired/prkl30/promicro/rules.mk

@@ -0,0 +1,27 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE  = no      # Virtual DIP switch configuration
+ENCODER_ENABLE = yes
+MOUSEKEY_ENABLE  = no       # Mouse keys
+EXTRAKEY_ENABLE  = yes      # Audio control and System control
+CONSOLE_ENABLE  = yes       # Console for debug
+COMMAND_ENABLE  = yes       # Commands for debug and configuration
+SLEEP_LED_ENABLE  = no      # Breathing sleep LED during USB suspend
+NKRO_ENABLE  = yes          # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE  = no
+AUDIO_ENABLE  = no          # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE  = yes      # This can be enabled if a ws2812 strip is connected to the expansion port.

keyboards/handwired/prkl30/readme.md

@@ -0,0 +1,19 @@
+# PRKL30
+
+![prkl30](https://camo.githubusercontent.com/9b39ee253a7cdcbfdbe80f7ef36ddd3ad5b17382/68747470733a2f2f692e696d6775722e636f6d2f4e6b67493339492e6a7067)
+
+30% Keyboard with ISO Enter, ortho layout and bluetooth support
+
+* Keyboard Maintainer: [ErkHal](https://github.com/erkhal)
+* Hardware Supported: PRKL30 PCB, Pro Micro/Adafruit Feather
+* Hardware Availability: [PRKL30 repo](https://github.com/erkhal/prkl30)
+
+Make example for this keyboard with Pro Micro controller (after setting up your build environment):
+
+    make handwired/prkl30/promicro:default
+
+Make example for this keyboard with Feather controller (after setting up your build environment):
+
+    make handwired/prkl30/feather:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/splittest/promicro/config.h

@@ -18,6 +18,9 @@
 
 #include "config_common.h"
 
+// use I2C on AVR
+#define USE_I2C
+
 // wiring of each half
 #define MATRIX_ROW_PINS { B3 }
 #define MATRIX_COL_PINS { B6 }

keyboards/handwired/splittest/teensy_2/config.h

@@ -18,6 +18,9 @@
 
 #include "config_common.h"
 
+// use I2C on AVR
+#define USE_I2C
+
 // wiring of each half
 #define MATRIX_ROW_PINS { F5 }
 #define MATRIX_COL_PINS { F7 }

keyboards/helix/local_drivers/i2c.c

@@ -6,8 +6,6 @@
 #include <stdbool.h>
 #include "i2c.h"
 
-#ifdef USE_I2C
-
 // Limits the amount of we wait for any one i2c transaction.
 // Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
 // 9 bits, a single transaction will take around 90μs to complete.
@@ -159,4 +157,3 @@ ISR(TWI_vect) {
   // Reset everything, so we are ready for the next TWI interrupt
   TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
 }
-#endif

keyboards/helix/pico/config.h

@@ -30,7 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TAPPING_TERM 100
 
 /* Use I2C or Serial */
-#define USE_I2C
 #define USE_SERIAL
 //#define USE_MATRIX_I2C
 
@@ -60,6 +59,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
 // #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
 
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 

keyboards/helix/pico/keymaps/default/readme.md

@@ -120,6 +120,13 @@ $ make HELIX=no_ani helix/pico/back:default  # with backlight without animation
 $ make helix/pico/under:default              # with underglow
 ```
 
+build (experimental use of split_common)
+```
+$ make helix/pico/sc:default
+$ make helix/pico/sc/back:default
+$ make helix/pico/sc/under:default
+```
+
 flash to keyboard
 ```
 $ make helix/pico:default:flash

keyboards/helix/pico/local_features.mk

@@ -10,7 +10,7 @@ define HELIX_CUSTOMISE_MSG
   $(info -  OLED_ENABLE          = $(OLED_ENABLE))
   $(info -  LED_BACK_ENABLE      = $(LED_BACK_ENABLE))
   $(info -  LED_UNDERGLOW_ENABLE = $(LED_UNDERGLOW_ENABLE))
-  $(info -  LED_ANIMATION        = $(LED_ANIMATIONS))
+  $(info -  LED_ANIMATIONS       = $(LED_ANIMATIONS))
   $(info -  IOS_DEVICE_ENABLE    = $(IOS_DEVICE_ENABLE))
   $(info )
 endef
@@ -43,12 +43,34 @@ endef
     ifeq ($(findstring ios,$(HELIX)), ios)
       IOS_DEVICE_ENABLE = yes
     endif
+    ifeq ($(findstring scan,$(HELIX)), scan)
+      # use DEBUG_MATRIX_SCAN_RATE
+      # see docs/newbs_testing_debugging.md
+      OPT_DEFS +=  -DDEBUG_MATRIX_SCAN_RATE
+      CONSOLE_ENABLE = yes
+      SHOW_VERBOSE_INFO = yes
+    endif
     ifeq ($(findstring verbose,$(HELIX)), verbose)
-       SHOW_VERBOSE_INFO = yes
+      SHOW_VERBOSE_INFO = yes
     endif
     SHOW_HELIX_OPTIONS = yes
   endif
 
+ifneq ($(strip $(SPLIT_KEYBOARD)), yes)
+  SRC += local_drivers/serial.c
+  KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
+
+  # A workaround until #7089 is merged.
+  #   serial.c must not be compiled with the -lto option.
+  #   The current LIB_SRC has a side effect with the -fno-lto option, so use it.
+  LIB_SRC += local_drivers/serial.c
+
+  CUSTOM_MATRIX = yes
+
+  SRC += pico/matrix.c
+  SRC += pico/split_util.c
+endif
+
 ########
 # convert Helix-specific options (that represent combinations of standard options)
 #   into QMK standard options.
@@ -73,11 +95,13 @@ ifeq ($(strip $(LED_ANIMATIONS)), yes)
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)
+    SRC += local_drivers/i2c.c
+    SRC += local_drivers/ssd1306.c
+    KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
     OPT_DEFS += -DOLED_ENABLE
-endif
+    ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
-
+        OPT_DEFS += -DLOCAL_GLCDFONT
-ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
+    endif
-    OPT_DEFS += -DLOCAL_GLCDFONT
 endif
 
 ifeq ($(strip $(AUDIO_ENABLE)),yes)
@@ -92,8 +116,10 @@ endif
 ifneq ($(strip $(SHOW_HELIX_OPTIONS)),)
   $(eval $(call HELIX_CUSTOMISE_MSG))
   ifneq ($(strip $(SHOW_VERBOSE_INFO)),)
-     $(info -- RGBLIGHT_ENABLE = $(RGBLIGHT_ENABLE))
+     $(info -- RGBLIGHT_ENABLE    = $(RGBLIGHT_ENABLE))
-     $(info -- OPT_DEFS        = $(OPT_DEFS))
+     $(info -- OLED_DRIVER_ENABLE = $(OLED_DRIVER_ENABLE))
+     $(info -- CONSOLE_ENABLE     = $(CONSOLE_ENABLE))
+     $(info -- OPT_DEFS           = $(OPT_DEFS))
      $(info -- LINK_TIME_OPTIMIZATION_ENABLE = $(LINK_TIME_OPTIMIZATION_ENABLE))
      $(info )
   endif

keyboards/helix/pico/matrix.c

@@ -46,7 +46,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 static uint8_t debouncing = DEBOUNCE;
 static const int ROWS_PER_HAND = MATRIX_ROWS/2;
 static uint8_t error_count = 0;
-uint8_t is_master = 0 ;
 
 static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
 static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
@@ -94,9 +93,8 @@ uint8_t matrix_cols(void)
 
 void matrix_init(void)
 {
-    debug_enable = true;
+    split_keyboard_setup();
-    debug_matrix = true;
+
-    debug_mouse = true;
     // initialize row and col
     unselect_rows();
     init_cols();
@@ -111,8 +109,6 @@ void matrix_init(void)
         matrix_debouncing[i] = 0;
     }
 
-    is_master = has_usb();
-
     matrix_init_quantum();
 }
 
@@ -197,7 +193,7 @@ int serial_transaction(void) {
 
 uint8_t matrix_scan(void)
 {
-    if (is_master) {
+    if (is_helix_master()) {
         matrix_master_scan();
     }else{
         matrix_slave_scan();

keyboards/helix/pico/pico.c

@@ -1,5 +1,9 @@
 #include "helix.h"
 
+// Each keymap.c should use is_keyboard_master() instead of 'is_master'.
+// But keep 'is_master' for a while for backwards compatibility
+//  for the old keymap.c.
+uint8_t is_master = false;
 
 #ifdef SSD1306OLED
 #include "ssd1306.h"
@@ -15,6 +19,23 @@ void led_set_kb(uint8_t usb_led) {
 #endif
 
 void matrix_init_kb(void) {
+    // Each keymap.c should use is_keyboard_master() instead of is_master.
+    // But keep is_master for a while for backwards compatibility
+    //  for the old keymap.c.
+    is_master = is_keyboard_master();
 
 	matrix_init_user();
 };
+
+void keyboard_post_init_kb(void) {
+#if defined(DEBUG_MATRIX_SCAN_RATE)
+    debug_enable = true;
+#endif
+    keyboard_post_init_user();
+}
+
+#if defined(SPLIT_KEYBOARD) && defined(SSD1306OLED)
+void matrix_slave_scan_user(void) {
+    matrix_scan_user();
+}
+#endif

keyboards/helix/pico/pico.h

@@ -4,18 +4,16 @@
 
 #include "quantum.h"
 
-#ifdef RGBLIGHT_ENABLE
+#ifndef SPLIT_KEYBOARD
-//rgb led driver
+  extern bool is_helix_master(void);
-#include "ws2812.h"
+  #define is_keyboard_master() is_helix_master()
 #endif
 
-#ifdef USE_I2C
+// Each keymap.c should use is_keyboard_master() instead of 'is_master', 'has_usb()'.
-#include <stddef.h>
+// But keep 'is_master' for a while for backwards compatibility
-#ifdef __AVR__
+//  for the old keymap.c.
-	#include <avr/io.h>
+extern uint8_t is_master; // 'is_master' will be obsolete, it is recommended to use 'is_keyboard_master ()' instead.
-	#include <avr/interrupt.h>
+#define has_usb() is_keyboard_master()
-#endif
-#endif
 
 #ifndef FLIP_HALF
 // Standard Keymap

keyboards/helix/pico/post_config.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#if defined(SPLIT_KEYBOARD) /* if use split_common */
+#  if defined(RGBLIGHT_ENABLE) && !defined(RGBLIGHT_SPLIT)
+#    define RGBLIGHT_SPLIT /* helix hardware need this */
+#  endif
+#endif

keyboards/helix/pico/rules.mk

@@ -1,20 +1,5 @@
 KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk
 
-SRC += local_drivers/i2c.c
-SRC += local_drivers/serial.c
-SRC += local_drivers/ssd1306.c
-KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
-
-# A workaround until #7089 is merged.
-#   serial.c must not be compiled with the -lto option.
-#   The current LIB_SRC has a side effect with the -fno-lto option, so use it.
-LIB_SRC += local_drivers/serial.c
-
-CUSTOM_MATRIX = yes
-
-SRC += pico/matrix.c
-SRC += pico/split_util.c
-
 # Helix Spacific Build Options default values
 OLED_ENABLE = no            # OLED_ENABLE
 LOCAL_GLCDFONT = no         # use each keymaps "helixfont.h" insted of "common/glcdfont.c"

keyboards/helix/pico/sc/back/rules.mk

@@ -0,0 +1 @@
+LED_BACK_ENABLE = yes

keyboards/helix/pico/sc/rules.mk

@@ -0,0 +1 @@
+SPLIT_KEYBOARD = yes

keyboards/helix/pico/sc/under/rules.mk

@@ -0,0 +1 @@
+LED_UNDERGLOW_ENABLE = yes

keyboards/helix/pico/split_util.c

@@ -7,6 +7,7 @@
 #include "split_util.h"
 #include "matrix.h"
 #include "keyboard.h"
+#include "wait.h"
 
 #ifdef USE_MATRIX_I2C
 #  include "i2c.h"
@@ -14,21 +15,65 @@
 #  include "serial.h"
 #endif
 
+#ifdef EE_HANDS
+#    include "eeconfig.h"
+#endif
+
+#ifndef SPLIT_USB_TIMEOUT
+  #define SPLIT_USB_TIMEOUT 2500
+#endif
+
 volatile bool isLeftHand = true;
 
-static void setup_handedness(void) {
+bool waitForUsb(void) {
-  #ifdef EE_HANDS
+    for (uint8_t i = 0; i < (SPLIT_USB_TIMEOUT / 100); i++) {
-    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+        // This will return true of a USB connection has been established
-  #else
+        if (UDADDR & _BV(ADDEN)) {
-    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+            return true;
-    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+        }
-      isLeftHand = !has_usb();
+        wait_ms(100);
-    #else
+    }
-      isLeftHand = has_usb();
+
-    #endif
+    // Avoid NO_USB_STARTUP_CHECK - Disable USB as the previous checks seem to enable it somehow
-  #endif
+    (USBCON &= ~(_BV(USBE) | _BV(OTGPADE)));
+
+    return false;
 }
 
+bool is_keyboard_left(void) {
+#if defined(SPLIT_HAND_PIN)
+    // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
+    setPinInput(SPLIT_HAND_PIN);
+    return readPin(SPLIT_HAND_PIN);
+#elif defined(EE_HANDS)
+    return eeconfig_read_handedness();
+#elif defined(MASTER_RIGHT)
+    return !is_helix_master();
+#endif
+
+    return is_helix_master();
+}
+
+bool is_helix_master(void) {
+    static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
+
+    // only check once, as this is called often
+    if (usbstate == UNKNOWN) {
+#if defined(SPLIT_USB_DETECT)
+        usbstate = waitForUsb() ? MASTER : SLAVE;
+#elif defined(__AVR__)
+        USBCON |= (1 << OTGPADE);  // enables VBUS pad
+        wait_us(5);
+
+        usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE;  // checks state of VBUS
+#else
+        usbstate = MASTER;
+#endif
+    }
+
+    return (usbstate == MASTER);
+ }
+
 static void keyboard_master_setup(void) {
 
 #ifdef USE_MATRIX_I2C
@@ -47,24 +92,13 @@ static void keyboard_slave_setup(void) {
 #endif
 }
 
-bool has_usb(void) {
-   USBCON |= (1 << OTGPADE); //enables VBUS pad
-   _delay_us(5);
-   return (USBSTA & (1<<VBUS));  //checks state of VBUS
-}
-
 void split_keyboard_setup(void) {
-   setup_handedness();
+   isLeftHand = is_keyboard_left();
 
-   if (has_usb()) {
+   if (is_helix_master()) {
       keyboard_master_setup();
    } else {
       keyboard_slave_setup();
    }
    sei();
 }
-
-// this code runs before the usb and keyboard is initialized
-void matrix_setup(void) {
-    split_keyboard_setup();
-}

keyboards/helix/pico/split_util.h

@@ -12,7 +12,7 @@ extern volatile bool isLeftHand;
 void matrix_slave_scan(void);
 
 void split_keyboard_setup(void);
-bool has_usb(void);
+bool is_helix_master(void);
 
 void matrix_master_OLED_init (void);
 

keyboards/helix/readme.md

@@ -9,8 +9,8 @@ Keyboard Maintainer: [Makoto Kurauchi](https://github.com/MakotoKurauchi/) [@plu
 Hardware Supported: Helix PCB Alpha, Beta, Pro Micro  
 Hardware Availability: [PCB & Case Data](https://github.com/MakotoKurauchi/helix), [Yushakobo Shop](https://yushakobo.jp/shop/), [Little Keyboards](https://littlekeyboards.com/collections/helix) 
 
-Make example for this keyboard (after setting up your build environment):
+## How to build
-
+ * [Helix how to Customize and Compile](rev2/keymaps/default/readme.md#customize)
-    make helix:default
+ * [HelixPico how to Customize and Compile](pico/keymaps/default/readme.md#customize)
 
 See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

keyboards/helix/rev2/config.h

@@ -30,7 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TAPPING_TERM 100
 
 /* Use I2C or Serial */
-#define USE_I2C
 #define USE_SERIAL
 //#define USE_MATRIX_I2C
 
@@ -68,6 +67,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
 // #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
 
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 

keyboards/helix/rev2/keymaps/default/readme.md

@@ -137,6 +137,16 @@ $ make helix/rev2/oled/back:default          # with oled and backlight
 $ make helix/rev2/oled/under:default         # with oled and underglow
 ```
 
+build (experimental use of split_common)
+```
+$ make helix/rev2/sc:default
+$ make helix/rev2/sc/back:default
+$ make helix/rev2/sc/under:default
+$ make helix/rev2/sc/oled:default
+$ make helix/rev2/sc/oledback:default
+$ make helix/rev2/sc/oledunder:default
+```
+
 flash to keyboard
 ```
 $ make helix:default:flash

keyboards/helix/rev2/keymaps/xulkal/rules.mk

@@ -9,3 +9,5 @@ OLED_DRIVER_ENABLE = yes
 OPT_DEFS += -DOLED_FONT_H=\"common/glcdfont.c\"
 # Xulkal specific oled define
 OPT_DEFS += -DOLED_90ROTATION
+
+SPLIT_KEYBOARD = yes

keyboards/helix/rev2/local_features.mk

@@ -10,7 +10,7 @@ define HELIX_CUSTOMISE_MSG
   $(info -  OLED_ENABLE          = $(OLED_ENABLE))
   $(info -  LED_BACK_ENABLE      = $(LED_BACK_ENABLE))
   $(info -  LED_UNDERGLOW_ENABLE = $(LED_UNDERGLOW_ENABLE))
-  $(info -  LED_ANIMATION        = $(LED_ANIMATIONS))
+  $(info -  LED_ANIMATIONS       = $(LED_ANIMATIONS))
   $(info -  IOS_DEVICE_ENABLE    = $(IOS_DEVICE_ENABLE))
   $(info )
 endef
@@ -43,12 +43,35 @@ endef
     ifeq ($(findstring ios,$(HELIX)), ios)
       IOS_DEVICE_ENABLE = yes
     endif
+    ifeq ($(findstring scan,$(HELIX)), scan)
+      # use DEBUG_MATRIX_SCAN_RATE
+      # see docs/newbs_testing_debugging.md
+      OPT_DEFS +=  -DDEBUG_MATRIX_SCAN_RATE
+      CONSOLE_ENABLE = yes
+      SHOW_VERBOSE_INFO = yes
+    endif
     ifeq ($(findstring verbose,$(HELIX)), verbose)
-       SHOW_VERBOSE_INFO = yes
+      SHOW_VERBOSE_INFO = yes
     endif
     SHOW_HELIX_OPTIONS = yes
   endif
 
+ifneq ($(strip $(SPLIT_KEYBOARD)), yes)
+  SRC += local_drivers/serial.c
+  KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
+
+  # A workaround until #7089 is merged.
+  #   serial.c must not be compiled with the -lto option.
+  #   The current LIB_SRC has a side effect with the -fno-lto option, so use it.
+  LIB_SRC += local_drivers/serial.c
+
+  CUSTOM_MATRIX = yes
+
+  SRC += rev2/matrix.c
+  SRC += rev2/split_util.c
+  SRC += rev2/split_scomm.c
+endif
+
 ########
 # convert Helix-specific options (that represent combinations of standard options)
 #   into QMK standard options.
@@ -80,18 +103,22 @@ ifeq ($(strip $(LED_ANIMATIONS)), yes)
 endif
 
 ifeq ($(strip $(OLED_ENABLE)), yes)
+    SRC += local_drivers/i2c.c
+    SRC += local_drivers/ssd1306.c
+    KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
     OPT_DEFS += -DOLED_ENABLE
-endif
+    ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
-
+        OPT_DEFS += -DLOCAL_GLCDFONT
-ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
+    endif
-    OPT_DEFS += -DLOCAL_GLCDFONT
 endif
 
 ifneq ($(strip $(SHOW_HELIX_OPTIONS)),)
   $(eval $(call HELIX_CUSTOMISE_MSG))
   ifneq ($(strip $(SHOW_VERBOSE_INFO)),)
-     $(info -- RGBLIGHT_ENABLE = $(RGBLIGHT_ENABLE))
+     $(info -- RGBLIGHT_ENABLE    = $(RGBLIGHT_ENABLE))
-     $(info -- OPT_DEFS        = $(OPT_DEFS))
+     $(info -- OLED_DRIVER_ENABLE = $(OLED_DRIVER_ENABLE))
+     $(info -- CONSOLE_ENABLE     = $(CONSOLE_ENABLE))
+     $(info -- OPT_DEFS           = $(OPT_DEFS))
      $(info -- LINK_TIME_OPTIMIZATION_ENABLE = $(LINK_TIME_OPTIMIZATION_ENABLE))
      $(info )
   endif

keyboards/helix/rev2/matrix.c

@@ -47,7 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 static uint8_t debouncing = DEBOUNCE;
 static const int ROWS_PER_HAND = MATRIX_ROWS/2;
 static uint8_t error_count = 0;
-uint8_t is_master = 0 ;
 
 static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
 static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
@@ -111,8 +110,6 @@ void matrix_init(void)
         matrix_debouncing[i] = 0;
     }
 
-    is_master = has_usb();
-
     matrix_init_quantum();
 }
 
@@ -200,7 +197,7 @@ int serial_transaction(int master_changed) {
 
 uint8_t matrix_scan(void)
 {
-    if (is_master) {
+    if (is_helix_master()) {
         matrix_master_scan();
     }else{
         matrix_slave_scan();

keyboards/helix/rev2/post_config.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#if defined(SPLIT_KEYBOARD) /* if use split_common */
+#  if defined(RGBLIGHT_ENABLE) && !defined(RGBLIGHT_SPLIT)
+#    define RGBLIGHT_SPLIT /* helix hardware need this */
+#  endif
+#endif

keyboards/helix/rev2/rev2.c

@@ -1,5 +1,9 @@
 #include "helix.h"
 
+// Each keymap.c should use is_keyboard_master() instead of 'is_master'.
+// But keep 'is_master' for a while for backwards compatibility
+//  for the old keymap.c.
+uint8_t is_master = false;
 
 #ifdef SSD1306OLED
 #include "ssd1306.h"
@@ -15,7 +19,23 @@ void led_set_kb(uint8_t usb_led) {
 #endif
 
 void matrix_init_kb(void) {
+    // Each keymap.c should use is_keyboard_master() instead of is_master.
+    // But keep is_master for a while for backwards compatibility
+    //  for the old keymap.c.
+    is_master = is_keyboard_master();
 
 	matrix_init_user();
 };
 
+void keyboard_post_init_kb(void) {
+#if defined(DEBUG_MATRIX_SCAN_RATE)
+    debug_enable = true;
+#endif
+    keyboard_post_init_user();
+}
+
+#if defined(SPLIT_KEYBOARD) && defined(SSD1306OLED)
+void matrix_slave_scan_user(void) {
+    matrix_scan_user();
+}
+#endif

keyboards/helix/rev2/rev2.h

@@ -4,18 +4,16 @@
 
 #include "quantum.h"
 
-#ifdef RGBLIGHT_ENABLE
+#ifndef SPLIT_KEYBOARD
-//rgb led driver
+  extern bool is_helix_master(void);
-#include "ws2812.h"
+  #define is_keyboard_master() is_helix_master()
 #endif
 
-#ifdef USE_I2C
+// Each keymap.c should use is_keyboard_master() instead of 'is_master', 'has_usb()'.
-#include <stddef.h>
+// But keep 'is_master' for a while for backwards compatibility
-#ifdef __AVR__
+//  for the old keymap.c.
-  #include <avr/io.h>
+extern uint8_t is_master; // 'is_master' will be obsolete, it is recommended to use 'is_keyboard_master ()' instead.
-  #include <avr/interrupt.h>
+#define has_usb() is_keyboard_master()
-#endif
-#endif
 
 #if MATRIX_ROWS == 8 // HELIX_ROWS == 4
 #ifndef FLIP_HALF

keyboards/helix/rev2/rules.mk

@@ -1,21 +1,5 @@
 KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk
 
-SRC += local_drivers/i2c.c
-SRC += local_drivers/serial.c
-SRC += local_drivers/ssd1306.c
-KEYBOARD_PATHS += $(HELIX_TOP_DIR)/local_drivers
-
-# A workaround until #7089 is merged.
-#   serial.c must not be compiled with the -lto option.
-#   The current LIB_SRC has a side effect with the -fno-lto option, so use it.
-LIB_SRC += local_drivers/serial.c
-
-CUSTOM_MATRIX = yes
-
-SRC += rev2/matrix.c
-SRC += rev2/split_util.c
-SRC += rev2/split_scomm.c
-
 # Helix Spacific Build Options default values
 HELIX_ROWS = 5              # Helix Rows is 4 or 5
 OLED_ENABLE = no            # OLED_ENABLE

keyboards/helix/rev2/sc/back/rules.mk

@@ -0,0 +1 @@
+LED_BACK_ENABLE = yes

keyboards/helix/rev2/sc/oled/rules.mk

@@ -0,0 +1 @@
+OLED_ENABLE = yes

keyboards/helix/rev2/sc/oledback/rules.mk

@@ -0,0 +1,2 @@
+OLED_ENABLE = yes
+LED_BACK_ENABLE = yes

keyboards/helix/rev2/sc/oledunder/rules.mk

@@ -0,0 +1,2 @@
+OLED_ENABLE = yes
+LED_UNDERGLOW_ENABLE = yes

keyboards/helix/rev2/sc/rules.mk

@@ -0,0 +1 @@
+SPLIT_KEYBOARD = yes

keyboards/helix/rev2/sc/under/rules.mk

@@ -0,0 +1 @@
+LED_UNDERGLOW_ENABLE = yes

keyboards/helix/rev2/split_util.c

@@ -45,7 +45,7 @@ bool waitForUsb(void) {
 }
 
 
-__attribute__((weak)) bool is_keyboard_left(void) {
+bool is_keyboard_left(void) {
 #if defined(SPLIT_HAND_PIN)
     // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
     setPinInput(SPLIT_HAND_PIN);
@@ -53,13 +53,13 @@ __attribute__((weak)) bool is_keyboard_left(void) {
 #elif defined(EE_HANDS)
     return eeconfig_read_handedness();
 #elif defined(MASTER_RIGHT)
-    return !has_usb();
+    return !is_helix_master();
 #endif
 
-    return has_usb();
+    return is_helix_master();
 }
 
-__attribute__((weak)) bool has_usb(void) {
+bool is_helix_master(void) {
     static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
 
     // only check once, as this is called often
@@ -100,11 +100,10 @@ static void keyboard_slave_setup(void) {
 void split_keyboard_setup(void) {
    isLeftHand = is_keyboard_left();
 
-   if (has_usb()) {
+   if (is_helix_master()) {
       keyboard_master_setup();
    } else {
       keyboard_slave_setup();
    }
    sei();
 }
-

keyboards/helix/rev2/split_util.h

@@ -12,7 +12,7 @@ extern volatile bool isLeftHand;
 void matrix_slave_scan(void);
 
 void split_keyboard_setup(void);
-bool has_usb(void);
+bool is_helix_master(void);
 
 void matrix_master_OLED_init (void);
 

keyboards/hhkb/keymaps/brett/config.h

@@ -0,0 +1,17 @@
+#pragma once
+
+// Define mousekey settings
+#define MOUSEKEY_DELAY          0
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_MAX_SPEED      2
+#define MOUSEKEY_TIME_TO_MAX    5
+#define MOUSEKEY_WHEEL_DELAY    0
+
+#define LSPO_KEY KC_9
+#define RSPC_KEY KC_0
+#define LSPO_MOD KC_LSHIFT
+#define RSPC_MOD KC_RSHIFT
+
+// This makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when
+// you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
+#define IGNORE_MOD_TAP_INTERRUPT

keyboards/hhkb/keymaps/brett/keymap.c

@@ -0,0 +1,119 @@
+/*  -*-  eval: (turn-on-orgtbl); -*-
+ * Brettm12345 HHKB Layout
+ */
+#include QMK_KEYBOARD_H
+#include "brett.h"
+
+enum layers {
+   BASE = 0,
+   HHKB = 1,
+   PROG = 2,
+   MOUSE = 3
+};
+
+// Tap for tab hold for MOUSE
+#define TAB_MOUSE LT(MOUSE, KC_TAB)
+
+// Tap for space hold for PROG
+#define SPACE_PROG LT(PROG, KC_SPC)
+
+// Tap for ESC hold for CTRL
+#define CTL_ESC CTL_T(KC_ESC)
+
+// Tab for ; hold for PROG
+#define PROG_SCLN LT(PROG, KC_SCLN)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* BASE Level: Default Layer
+     |---------+---+---+---+---+---+---+---+---+---+---+--------+--------+-----------+---|
+     | Esc     | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | -      | =      | \         | ` |
+     |---------+---+---+---+---+---+---+---+---+---+---+--------+--------+-----------+---|
+     | Tab     | Q | W | E | R | T | Y | U | I | O | P | [      | ]      | Backspace | * |
+     |---------+---+---+---+---+---+---+---+---+---+---+--------+--------+-----------+---|
+     | Control | A | S | D | F | G | H | J | K | L | ; | '      | Return | ******    | * |
+     |---------+---+---+---+---+---+---+---+---+---+---+--------+--------+-----------+---|
+     | LShift  | Z | X | C | V | B | N | M | , | . | / | RShift | HHKB   | ******    | * |
+     |---------+---+---+---+---+---+---+---+---+---+---+--------+--------+-----------+---|
+
+                |------+------+----------------------------+------+------|
+                | LAlt | LGUI | ******* Space/Prog ******* | RGUI | RAlt |
+                |------+------+----------------------------+------+------|
+    */
+
+	[BASE] = LAYOUT(
+    KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
+    TAB_MOUSE, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+    CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, PROG_SCLN, KC_QUOT, KC_ENT,
+    KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, MO(HHKB),
+    KC_LALT, KC_LGUI, SPACE_PROG, KC_RGUI, KC_RALT),
+
+    /* HHKB Level: Function Layer
+     |---------+------+------+--------+---------+-------+-----------+---------+---------+---------+----------------+--------+------+--------+-----|
+     | Flash   | F1   | F2   | F3     | F4      | F5    | F6        | F7      | F8      | F9      | F10            | F11    | F12  | Ins    | Del |
+     |---------+------+------+--------+---------+-------+-----------+---------+---------+---------+----------------+--------+------+--------+-----|
+     | Caps    | Calc | Mail | Media  | Browser | My PC | Browser   | u       | i       | o       | Print          | [      | ]    | Backsp | *   |
+     |         |      |      | Player | Refresh |       | Favorites |         |         |         | Screen         |        |      |        |     |
+     |---------+------+------+--------+---------+-------+-----------+---------+---------+---------+----------------+--------+------+--------+-----|
+     | Control | Prev | Next | Find   | f       | g     | Browser   | Browser | Browser | Browser | ;              | '      | Exec | ****** | *   |
+     |         |      |      |        |         |       | Back      | Home    | Search  | Forward |                |        |      |        |     |
+     |---------+------+------+--------+---------+-------+-----------+---------+---------+---------+----------------+--------+------+--------+-----|
+     | LShift  | Vol+ | Vol- | Mute   | Select  | b     | n         | m       | ,       | Again   | Browser Search | RShift | HHKB | ****** | *   |
+     |---------+------+------+--------+---------+-------+-----------+---------+---------+---------+----------------+--------+------+--------+-----|
+
+                |------+------+----------------------+------+------|
+                | Menu | LGUI | ******* Play ******* | RGUI | Menu |
+                |------+------+----------------------+------+------|
+    */
+	[HHKB] = LAYOUT(
+    FLASH, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
+    KC_CAPS, KC_CALC, KC_MAIL, KC_MSEL, KC_WREF, KC_MYCM, KC_WFAV, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_BSPC,
+    KC_TRNS, KC_MPRV, KC_MNXT, KC_FIND, KC_TRNS, KC_TRNS, KC_WBAK, KC_WHOM, KC_WSCH, KC_WFWD, KC_TRNS, KC_TRNS, KC_EXEC,
+    KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_SLCT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_AGIN, KC_WSCH, KC_TRNS, KC_TRNS,
+    KC_MENU, KC_TRNS, KC_MPLY, KC_TRNS, KC_MENU),
+
+
+    /* Programming Level: Symbols Layer
+     |--------------+-------+-------+-------+-------+-------+-------+-------+-------+-------+--------+--------+--------+--------+---|
+     | Esc          | TTY 1 | TTY 2 | TTY 3 | TTY 4 | TTY 5 | TTY 6 | TTY 7 | TTY 8 | TTY 9 | TTY 10 | TTY 11 | TTY 12 | \      | ` |
+     |--------------+-------+-------+-------+-------+-------+-------+-------+-------+-------+--------+--------+--------+--------+---|
+     | Tab/Mouse    | =>    | @     | >>=   | =<<   | ‖     | <>    | <｜>  | <*>   | <@>   | ｜>    | <$     | $>     | Backsp | * |
+     |--------------+-------+-------+-------+-------+-------+-------+-------+-------+-------+--------+--------+--------+--------+---|
+     | Toggle Mouse | ->    | *     | <$>   | <#>   | &&    | Left  | Down  | Up    | Right | ::     | `      | Return | ****** | * |
+     |--------------+-------+-------+-------+-------+-------+-------+-------+-------+-------+--------+--------+--------+--------+---|
+     | LShift       | z     | x     | c     | v     | b     | n     | m     | <-    | ->    | <>     | Shift  | HHKB   | ****** | * |
+     |--------------+-------+-------+-------+-------+-------+-------+-------+-------+-------+--------+--------+--------+--------+---|
+
+                |------+------+----------------------------+------+------|
+                | LAlt | LGUI | ******* Space/Prog ******* | RGUI | RAlt |
+                |------+------+----------------------------+------+------|
+    */
+	[PROG] = LAYOUT(
+    KC_GESC, LCA(KC_F1), LCA(KC_F2), LCA(KC_F3), LCA(KC_F4), LCA(KC_F5), LCA(KC_F6), LCA(KC_F7), LCA(KC_F8), LCA(KC_F9), LCA(KC_F10), LCA(KC_F11), LCA(KC_F12), KC_TRNS, KC_TRNS,
+    KC_TRNS, FAT_ARROW, KC_AT, BIND, BIND_FLIPPED, OR, CONCAT, ALT, APPLY, FLAP, PIPE, VOID_LEFT, VOID_RIGHT, KC_TRNS,
+    TG(MOUSE), SKINNY_ARROW, KC_ASTR, MAP, MAP_FLIPPED, AND, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, DOUBLE_COLON, KC_GRV, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, REVERSE_ARROW, SKINNY_ARROW, CONCAT, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+
+    /* Mouse Level: Mouse Layer
+     |--------------+---------+---------+---------+---------+---------+-------+-------+---------+---------+---------+-----------+-----------------+--------+---|
+     | Esc          | Speed 1 | Speed 2 | Speed 3 | 4       | 5       | 6     | 7     | 8       | 9       | 0       | -         | =               | \      | ` |
+     |--------------+---------+---------+---------+---------+---------+-------+-------+---------+---------+---------+-----------+-----------------+--------+---|
+     | Mouse(Tab)   | Q       | Up      | Button3 | Button4 | Button5 | Y     | U     | Button3 | Button4 | Button5 | [         | ]               | Backsp | * |
+     |--------------+---------+---------+---------+---------+---------+-------+-------+---------+---------+---------+-----------+-----------------+--------+---|
+     | Control(Esc) | Left    | Down    | Right   | Button1 | Button2 | SLeft | SDown | SUp     | SRight  | Button1 | Button2   | Control(Return) | ****** | * |
+     |--------------+---------+---------+---------+---------+---------+-------+-------+---------+---------+---------+-----------+-----------------+--------+---|
+     | LShift(()    | Z       | X       | C       | V       | B       | N     | M     | Button5 | Button4 | Button3 | RShift()) | HHKB            | ****** | * |
+     |--------------+---------+---------+---------+---------+---------+-------+-------+---------+---------+---------+-----------+-----------------+--------+---|
+
+                |---------+---------+----------------------------+---------+---------|
+                | LAlt([) | LGUI({) | ******* Space/Prog ******* | RGUI(}) | RAlt(]) |
+                |---------+---------+----------------------------+---------+---------|
+    */
+	[MOUSE] = LAYOUT(
+    KC_TRNS, KC_ACL0, KC_ACL1, KC_ACL2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_MS_U, KC_BTN3, KC_BTN4, KC_BTN5, KC_TRNS, KC_TRNS, KC_BTN3, KC_BTN4, KC_BTN5, KC_TRNS, KC_TRNS, KC_TRNS,
+    TG(MOUSE), KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN1, KC_BTN2, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R, KC_BTN1, KC_BTN2, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+};

keyboards/hhkb/keymaps/brett/readme.md

@@ -0,0 +1,13 @@
+# Generated Keymap Layout
+
+This layout was generated by the QMK API. You can find the JSON data used to
+generate this keymap in the file layers.json.
+
+To make use of this file you will need follow the following steps:
+
+* Download or Clone QMK Firmware: <https://github.com/qmk/qmk_firmware/>
+* Extract QMK Firmware to a location on your hard drive
+* Copy this folder into %s
+* You are now ready to compile or use your keymap with the source
+
+More information can be found in the QMK docs: <https://docs.qmk.fm>

keyboards/hhkb/keymaps/brett/rules.mk

@@ -0,0 +1,4 @@
+MOUSEKEY_ENABLE  = yes
+TAP_DANCE_ENABLE = no
+LEADER_ENABLE    = no
+UNICODE_ENABLE   = no

keyboards/j80/config.h

@@ -38,8 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_LEVELS 3
 #define BACKLIGHT_PIN D4
 
-#define NO_UART 1
-
 /* disable these deprecated features by default */
 #ifndef LINK_TIME_OPTIMIZATION_ENABLE
   #define NO_ACTION_MACRO

keyboards/jc65/v32a/config.h

@@ -42,7 +42,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 8
 
-#define NO_UART 1
-
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION

keyboards/jj40/config.h

@@ -45,7 +45,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-#define NO_UART 1
 #define USB_MAX_POWER_CONSUMPTION 100
 
 /* key combination for magic key command */

keyboards/jj4x4/config.h

@@ -48,7 +48,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-#define NO_UART 1
 #define USB_MAX_POWER_CONSUMPTION 100
 
 /* key combination for magic key command */

keyboards/jj50/config.h

@@ -48,6 +48,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_SAT_STEP 15
 #define RGBLIGHT_VAL_STEP 18
 
-#define NO_UART 1
-
 #endif

keyboards/keycapsss/plaid_pad/config.h

@@ -25,7 +25,6 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-#define NO_UART 1
 #define USB_MAX_POWER_CONSUMPTION 100
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */

keyboards/kira80/config.h

@@ -1,8 +1,5 @@
 /*
-This is the c configuration file for the keymap
+Copyright 2020 Lorenz Wellmer
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -20,4 +17,27 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#define USE_I2C
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xC583
+#define DEVICE_VER 0x0102
+#define MANUFACTURER EVE
+#define PRODUCT Kira80
+
+/* key matrix size */
+#define MATRIX_ROWS 7
+#define MATRIX_COLS 15
+
+#define MATRIX_ROW_PINS { B1, B2, B3, B5, B6, B7, B0 }
+#define MATRIX_COL_PINS { A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, A0, C2, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+#define DEBOUNCE 5
+
+#define BACKLIGHT_PIN D4
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3

keyboards/kira80/info.json

@@ -0,0 +1,21 @@
+{
+    "keyboard_name": "Kira 80", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 18.25, 
+    "height": 6.25, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Back", "x":13, "y":1.25}, {"label":"Back", "x":14, "y":1.25}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"label":"FN", "x":14, "y":4.25}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}]
+        },
+        "LAYOUT_tkl_ansi": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}]
+        },
+        "LAYOUT_tkl_ansi_wkl": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"label":"Alt", "x":11, "y":5.25, "w":1.5}, {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}]
+        },
+        "LAYOUT_tkl_iso": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"\u00ac", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"\"", "x":2, "y":1.25}, {"label":"\u00a3", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"@", "x":11.75, "y":3.25}, {"label":"~", "x":12.75, "y":3.25}, {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"AltGr", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}]
+        }
+    }
+}

keyboards/kira80/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2020 Lorenz Wellmer
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_all(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,      KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,               KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_TRNS,                        KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_RGUI, KC_RCTL,               KC_LEFT, KC_DOWN, KC_RGHT),
+
+    [1] = LAYOUT_all(
+        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI,               BL_TOGG, BL_DEC,  BL_INC,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,      KC_TRNS, KC_TRNS, KC_VOLU,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               KC_MPLY, KC_MNXT, KC_VOLD,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                        KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,               KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/kira80/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for kira80

keyboards/kira80/kira80.c

@@ -0,0 +1,35 @@
+/* Copyright 2020 Lorenz Wellmer
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "kira80.h"
+
+void keyboard_pre_init_kb(void) {
+    led_init_ports();
+    keyboard_pre_init_user();
+}
+
+void led_init_ports(void) {
+    setPinOutput(D1);
+    setPinOutput(D6);
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(D1, led_state.caps_lock);
+        writePin(D6, led_state.scroll_lock);
+    }
+    return true;
+}

keyboards/kira80/kira80.h

@@ -0,0 +1,95 @@
+/* Copyright 2020 Lorenz Wellmer
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all(\
+    K000,       K002, K003, K004, K005,    K007, K008, K009, K010,    K011, K012, K013, K001,    K091, K092, K102,  \
+    K015, K016, K017, K018, K019, K020, K021, K022, K023, K024, K025, K026, K027, K028, K029,    K096, K095, K094,  \
+    K030, K031, K032, K033, K034, K035, K036, K037, K038, K039, K040, K041, K042, K043,          K103, K098, K097,  \
+    K045, K046, K047, K048, K049, K050, K051, K052, K053, K054, K055, K056,       K057,                             \
+    K060, K058, K061, K062, K063, K064, K065, K066, K067, K068, K069, K070, K071, K072,                K073,        \
+    K075, K076, K077,                   K079,                   K083, K084, K085, K086,          K087, K088, K082   \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  KC_NO, K007,  K008,  K009,  K010,  K011,  K012,  K013,  KC_NO }, \
+    { K015,  K016,  K017,  K018,  K019,  K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028,  K029  }, \
+    { K030,  K031,  K032,  K033,  K034,  K035,  K036,  K037,  K038,  K039,  K040,  K041,  K042,  K043,  KC_NO }, \
+    { K045,  K046,  K047,  K048,  K049,  K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058,  KC_NO }, \
+    { K060,  K061,  K062,  K063,  K064,  K065,  K066,  K067,  K068,  K069,  K070,  K071,  K072,  K073,  KC_NO }, \
+    { K075,  K076,  K077,  KC_NO, K079,  KC_NO, KC_NO, K082,  K083,  K084,  K085,  K086,  K087,  K088,  KC_NO }, \
+    { KC_NO, K091,  K092,  KC_NO, K094,  K095,  K096,  K097,  K098,  KC_NO, KC_NO, KC_NO, K102,  K103,  KC_NO }  \
+}
+
+#define LAYOUT_tkl_ansi(\
+    K000,       K002, K003, K004, K005,    K007, K008, K009, K010,    K011, K012, K013, K001,    K091, K092, K102,  \
+    K015, K016, K017, K018, K019, K020, K021, K022, K023, K024, K025, K026, K027, K028,          K096, K095, K094,  \
+    K030, K031, K032, K033, K034, K035, K036, K037, K038, K039, K040, K041, K042, K043,          K103, K098, K097,  \
+    K045, K046, K047, K048, K049, K050, K051, K052, K053, K054, K055, K056,       K057,                             \
+    K060,       K061, K062, K063, K064, K065, K066, K067, K068, K069, K070,       K071,                K073,        \
+    K075, K076, K077,                   K079,                   K083, K084, K085, K086,          K087, K088, K082   \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  KC_NO, K007,  K008,  K009,  K010,  K011,  K012,  K013,  KC_NO }, \
+    { K015,  K016,  K017,  K018,  K019,  K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028,  K029  }, \
+    { K030,  K031,  K032,  K033,  K034,  K035,  K036,  K037,  K038,  K039,  K040,  K041,  K042,  K043,  KC_NO }, \
+    { K045,  K046,  K047,  K048,  K049,  K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058,  KC_NO }, \
+    { K060,  K061,  K062,  K063,  K064,  K065,  K066,  K067,  K068,  K069,  K070,  K071,  K072,  K073,  KC_NO }, \
+    { K075,  K076,  K077,  KC_NO, K079,  KC_NO, KC_NO, K082,  K083,  K084,  K085,  K086,  K087,  K088,  KC_NO }, \
+    { KC_NO, K091,  K092,  KC_NO, K094,  K095,  K096,  K097,  K098,  KC_NO, KC_NO, KC_NO, K102,  K103,  KC_NO }  \
+}
+
+#define LAYOUT_tkl_ansi_wkl(\
+    K000,       K002, K003, K004, K005,    K007, K008, K009, K010,    K011, K012, K013, K001,    K091, K092, K102,  \
+    K015, K016, K017, K018, K019, K020, K021, K022, K023, K024, K025, K026, K027, K028,          K096, K095, K094,  \
+    K030, K031, K032, K033, K034, K035, K036, K037, K038, K039, K040, K041, K042, K043,          K103, K098, K097,  \
+    K045, K046, K047, K048, K049, K050, K051, K052, K053, K054, K055, K056,       K057,                             \
+    K060,       K061, K062, K063, K064, K065, K066, K067, K068, K069, K070,       K071,                K073,        \
+    K075,       K077,                   K079,                         K084,       K086,          K087, K088, K082   \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  KC_NO, K007,  K008,  K009,  K010,  K011,  K012,  K013,  KC_NO }, \
+    { K015,  K016,  K017,  K018,  K019,  K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028,  K029  }, \
+    { K030,  K031,  K032,  K033,  K034,  K035,  K036,  K037,  K038,  K039,  K040,  K041,  K042,  K043,  KC_NO }, \
+    { K045,  K046,  K047,  K048,  K049,  K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058,  KC_NO }, \
+    { K060,  K061,  K062,  K063,  K064,  K065,  K066,  K067,  K068,  K069,  K070,  K071,  K072,  K073,  KC_NO }, \
+    { K075,  K076,  K077,  KC_NO, K079,  KC_NO, KC_NO, K082,  K083,  K084,  K085,  K086,  K087,  K088,  KC_NO }, \
+    { KC_NO, K091,  K092,  KC_NO, K094,  K095,  K096,  K097,  K098,  KC_NO, KC_NO, KC_NO, K102,  K103,  KC_NO }  \
+}
+
+#define LAYOUT_tkl_iso(\
+    K000,       K002, K003, K004, K005,    K007, K008, K009, K010,    K011, K012, K013, K001,    K091, K092, K102,  \
+    K015, K016, K017, K018, K019, K020, K021, K022, K023, K024, K025, K026, K027, K028,          K096, K095, K094,  \
+    K030, K031, K032, K033, K034, K035, K036, K037, K038, K039, K040, K041, K042,                K103, K098, K097,  \
+    K045, K046, K047, K048, K049, K050, K051, K052, K053, K054, K055, K056, K043, K057,                             \
+    K060, K058, K061, K062, K063, K064, K065, K066, K067, K068, K069, K070,       K071,                K073,        \
+    K075, K076, K077,                   K079,                   K083, K084, K085, K086,          K087, K088, K082   \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  KC_NO, K007,  K008,  K009,  K010,  K011,  K012,  K013,  KC_NO }, \
+    { K015,  K016,  K017,  K018,  K019,  K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028,  K029  }, \
+    { K030,  K031,  K032,  K033,  K034,  K035,  K036,  K037,  K038,  K039,  K040,  K041,  K042,  K043,  KC_NO }, \
+    { K045,  K046,  K047,  K048,  K049,  K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058,  KC_NO }, \
+    { K060,  K061,  K062,  K063,  K064,  K065,  K066,  K067,  K068,  K069,  K070,  K071,  K072,  K073,  KC_NO }, \
+    { K075,  K076,  K077,  KC_NO, K079,  KC_NO, KC_NO, K082,  K083,  K084,  K085,  K086,  K087,  K088,  KC_NO }, \
+    { KC_NO, K091,  K092,  KC_NO, K094,  K095,  K096,  K097,  K098,  KC_NO, KC_NO, KC_NO, K102,  K103,  KC_NO }  \
+}

keyboards/kira80/readme.md

@@ -0,0 +1,50 @@
+# Kira 80/TKL
+
+![kira80](https://i.imgur.com/QnGKnaml.jpg)
+![kira80pcb](https://i.imgur.com/wrEZhg5l.jpg)
+
+Custom TKL keyboard designed and made by Thesiscamper and EVE
+
+* Keyboard Maintainer: [elmo-space](https://github.com/elmo-space)
+* Hardware Supported: Kira 80 PCB made by EVE
+* Hardware Availability: limited [Group Buy](https://geekhack.org/index.php?topic=96381.0) finished
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kira80:default
+
+Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+
+    make kira80:default:flash
+
+**Reset Key:** Hold down the key located at `K102`, commonly programmed as 'Pause' while plugging in the keyboard.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Hardware Information
+
+Controller: ATmega32A
+
+### Pinout:
+
+|Pin |Use      | |Pin |Use            |
+|----|---------|-|----|---------------|
+|`A1`|Column 0 | |`B1`|Row 0          |
+|`A2`|Column 1 | |`B2`|Row 1          |
+|`A3`|Column 2 | |`B3`|Row 2          |
+|`A4`|Column 3 | |`B5`|Row 3          |
+|`A5`|Column 4 | |`B6`|Row 4          |
+|`A6`|Column 5 | |`B7`|Row 5          |
+|`A7`|Column 6 | |`B0`|Row 6          |
+|`C7`|Column 7 | |    |               |
+|`C6`|Column 8 | |`D1`|Caps Lock LED  |
+|`C5`|Column 9 | |`D6`|Scroll Lock LED|
+|`C4`|Column 10| |`D4`|Backlight      |
+|`C3`|Column 11| |    |               |
+|`A0`|Column 12| |`D2`|USB D+         |
+|`C2`|Column 13| |`D3`|USB D-         |
+|`D7`|Column 14| |    |               |
+
+### Layout matrix:
+
+![matrix](https://i.imgur.com/FqjTNQS.png)

keyboards/kira80/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32a
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = bootloadHID
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality

keyboards/kira80/usbconfig.h

@@ -0,0 +1,386 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'E', 'V', 'E'
+#define USB_CFG_VENDOR_NAME_LEN 3
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'K', 'i', 'r', 'a', '8', '0'
+#define USB_CFG_DEVICE_NAME_LEN 6
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT     INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT    INTF1
+#define USB_INTR_VECTOR         INT1_vect
+
+#endif /* __usbconfig_h_included__ */

keyboards/mechmini/v1/config.h

@@ -35,8 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4 }
 #define DIODE_DIRECTION COL2ROW
 
-#define NO_UART 1
-
 #define BACKLIGHT_PIN D4
 #define BACKLIGHT_LEVELS 3
 

keyboards/mt40/config.h

@@ -35,8 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 7
 #define MATRIX_COLS 15
 
-#define NO_UART 1
-
 #define RGB_DI_PIN C0
 #define RGBLED_NUM 12
 #define RGBLIGHT_ANIMATIONS

keyboards/palette1202/config.h

@@ -0,0 +1,55 @@
+/*
+Copyright 2019 niltea
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x1202
+#define DEVICE_VER   0x0001
+#define MANUFACTURER niltea
+#define PRODUCT      Palette1202
+#define DESCRIPTION  A left hand device with rotary encoder
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 5
+
+#define MATRIX_ROW_PINS { B6, B2, B3 }
+#define MATRIX_COL_PINS { C6, D7, E6, B4, B5 }
+#define UNUSED_PINS { D2, D3, D4, B1 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Encoders */
+#define ENCODERS_PAD_A { F4, F6 }
+#define ENCODERS_PAD_B { F5, F7 }
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Register custom font file */
+#ifdef OLED_DRIVER_ENABLE
+  #define OLED_FONT_H "lib/glcdfont.c"
+#endif
+
+/* Feature disable options */
+#define NO_DEBUG
+#define NO_PRINT

keyboards/palette1202/info.json

@@ -0,0 +1,30 @@
+{
+  "keyboard_name": "Palette1202",
+  "url": "https://github.com/niltea/Palette1202",
+  "maintainer": "niltea",
+  "width": 5,
+  "height": 3.5,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 14,
+      "layout": [
+        { "label":"Tab",     "x": 0, "y": 0.75 },
+        { "label":"GUI + A", "x": 1, "y": 0.25 },
+        { "label":"E",       "x": 2, "y": 0 },
+        { "label":"P",       "x": 3, "y": 0.5 },
+        { "label":"GUI + 0", "x": 4, "y": 0 },
+
+        { "label":"Fn",      "x": 0, "y": 1.75 },
+        { "label":"M",       "x": 1, "y": 1.25 },
+        { "label":"BackSP",  "x": 2, "y": 1 },
+        { "label":"B",       "x": 3, "y": 1.5 },
+        { "label":"HYPR",    "x": 4, "y": 1 },
+
+        { "label":"Shift",   "x": 1, "y": 2.5 },
+        { "label":"LGUI",    "x": 2, "y": 2.5 },
+        { "label":"GUI + Z", "x": 3, "y": 2.5 },
+        { "label":"Space",   "x": 4, "y": 2.5, "r": 15 }
+      ]
+    }
+  }
+}

keyboards/palette1202/keymaps/default/config.h

@@ -0,0 +1,20 @@
+/* Copyright 2019 niltea
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100

keyboards/palette1202/keymaps/default/keymap.c

@@ -0,0 +1,329 @@
+/* Copyright 2019 niltea
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#ifdef OLED_DRIVER_ENABLE
+  #include <string.h>
+  #include "lib/oled_helper.h"
+#endif
+
+enum custom_keycode {
+  Mac_CS = SAFE_RANGE,
+  Mac_PS,
+  Win_CS,
+  Win_PS,
+  IOS_CS,
+};
+enum layerID {
+  MAC_CS_1 = 0,
+  MAC_CS_2,
+  MAC_PS_1,
+  MAC_PS_2,
+  WIN_CS_1,
+  WIN_CS_2,
+  WIN_PS_1,
+  WIN_PS_2,
+  IOS_CS_1,
+  IOS_CS_2,
+  SETTING,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    // Mac
+    // Clip Studio
+    [MAC_CS_1] = LAYOUT(
+      KC_TAB,       LGUI(KC_A), KC_E,         KC_P,          LGUI(KC_0),
+      MO(MAC_CS_2), KC_M,       KC_BSPC,      KC_B,          KC_HYPR,
+                    KC_LSFT,    KC_LGUI,      LGUI(KC_Z),    KC_SPC
+    ),
+    [MAC_CS_2] = LAYOUT(
+      MO(SETTING),  KC_ESC,     KC_G,         KC_R,          LGUI(KC_GRV),
+      _______,      LGUI(KC_D), KC_K,         KC_F,          LGUI(KC_S),
+                    KC_LALT,    KC_I,         SGUI(KC_Z),    KC_H
+    ),
+    // Photoshop
+    [MAC_PS_1] = LAYOUT(
+      KC_TAB,       LGUI(KC_A), KC_E,         KC_B,          LGUI(KC_1),
+      MO(MAC_PS_2), KC_L,       LGUI(KC_DEL), LGUI(KC_QUOT), KC_MEH,
+                    KC_LSFT,    KC_LGUI,      LGUI(KC_Z),    KC_SPC
+    ),
+    [MAC_PS_2] = LAYOUT(
+      MO(SETTING),  KC_ESC,     KC_G,         KC_R,          KC_ESC,
+      _______,      LGUI(KC_D), KC_V,         LGUI(KC_T),    LGUI(KC_S),
+                    KC_LALT,    KC_I,         SGUI(KC_Z),    KC_H
+    ),
+
+    // Windows
+    // Clip Studio
+    [WIN_CS_1] = LAYOUT(
+      KC_TAB,       LCTL(KC_A), KC_E,         KC_P,          LCTL(KC_0),
+      MO(WIN_CS_2), KC_M,       KC_BSPC,      KC_B,          KC_HYPR,
+                    KC_LSFT,    KC_LCTRL,     LCTL(KC_Z),    KC_SPC
+    ),
+    [WIN_CS_2] = LAYOUT(
+      MO(SETTING),  KC_ESC,     KC_G,         KC_R,          LCTL(KC_GRV),
+      _______,      LCTL(KC_D), KC_K,         KC_F,          LCTL(KC_S),
+                    KC_LALT,    KC_I,         C(S(KC_Z)),    KC_H
+    ),
+    // Photoshop
+    [WIN_PS_1] = LAYOUT(
+      KC_TAB,       LCTL(KC_A), KC_E,         KC_B,          LCTL(KC_1),
+      MO(WIN_PS_2), KC_L,       LCTL(KC_DEL), LCTL(KC_QUOT), KC_MEH,
+                    KC_LSFT,    KC_LCTRL,     LCTL(KC_Z),    KC_SPC
+    ),
+    [WIN_PS_2] = LAYOUT(
+      MO(SETTING),  KC_ESC,     KC_G,         KC_R,          KC_ESC,
+      _______,      LCTL(KC_D), KC_V,         LCTL(KC_T),    LCTL(KC_S),
+                    KC_LALT,    KC_I,         C(S(KC_Z)),    KC_H
+    ),
+    // iOS
+    // Clip Studio
+    [IOS_CS_1] = LAYOUT(
+      KC_TAB,       LGUI(KC_A), KC_E,         KC_P,          LGUI(KC_0),
+      MO(IOS_CS_2), KC_M,       KC_BSPC,      KC_B,          LGUI(KC_LALT),
+                    KC_LSFT,    KC_LGUI,      LGUI(KC_Z),    KC_SPC
+    ),
+    [IOS_CS_2] = LAYOUT(
+      MO(SETTING),  KC_ESC,     KC_G,         KC_R,          LGUI(KC_EQL),
+      _______,      LGUI(KC_D), KC_K,         KC_F,          LGUI(KC_S),
+                    KC_LALT,    KC_I,         SGUI(KC_Z),    KC_H
+    ),
+    [SETTING] = LAYOUT(
+      _______, IOS_CS, Win_CS, Mac_CS, KC_NO,
+      _______, KC_NO,  Win_PS, Mac_PS, KC_NO,
+               KC_NO,  KC_NO,  KC_NO,  KC_NO
+    ),
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+  uint8_t currentDefault = get_highest_layer(default_layer_state);
+  uint8_t currentLayer = get_highest_layer(layer_state);
+  if (index == 0) { /* the upper encoder */
+    switch (currentDefault) {
+      case MAC_CS_1:
+        if (currentLayer % 2 == 0) {
+          // default layer
+          // Zoom
+          tap_code16(!clockwise ? G(KC_EQL) : G(KC_MINS));
+        } else {
+          // Fn Layer
+          // rotate canvas
+          tap_code(!clockwise ? KC_QUOT : KC_MINS);
+        }
+        break;
+      case MAC_PS_1:
+        if (currentLayer % 2 == 0) {
+          // default layer
+          // Zoom
+          tap_code16(!clockwise ? G(KC_EQL) : G(KC_MINS));
+        } else {
+          // Fn Layer
+          // undo / redo
+          tap_code16(!clockwise ? S(G(KC_Z)) : G(KC_Z));
+        }
+        break;
+      case WIN_CS_1:
+        if (currentLayer % 2 == 0) {
+          // default layer
+          // Zoom
+          tap_code16(!clockwise ? C(KC_EQL) : C(KC_MINS));
+        } else {
+          // Fn Layer
+          // rotate canvas
+          tap_code(!clockwise ? KC_QUOT : KC_MINS);
+        }
+        break;
+      case WIN_PS_1:
+        if (currentLayer % 2 == 0) {
+          // default layer
+          // Zoom
+          tap_code16(!clockwise ? C(KC_SCLN) : C(KC_MINS));
+        } else {
+          // Fn Layer
+          // undo / redo
+          tap_code16(!clockwise ? C(S(KC_Z)) : C(KC_Z));
+        }
+        break;
+      case IOS_CS_1:
+        if (currentLayer % 2 == 0) {
+          // default layer
+          // Zoom 
+          tap_code16(!clockwise ? G(KC_SCLN) : G(KC_MINS));
+        } else {
+          // Fn Layer
+          // rotate canvas
+          tap_code(!clockwise ? KC_EQL : KC_MINS);
+        }
+        break;
+      default:
+        break;
+    }
+  } else if (index == 1) { /* the lower encoder */ 
+    switch (currentDefault) {
+      case MAC_CS_1:
+        if (currentLayer % 2 == 0) {
+          // default layer
+          // size of brush
+          tap_code(!clockwise ? KC_RBRC : KC_LBRC);
+        } else {
+          // Fn Layer
+          // opacity of brush
+          tap_code16(!clockwise ? G(KC_RBRC) : G(KC_LBRC));
+        }
+        break;
+      case MAC_PS_1:
+        if (currentLayer % 2 == 0) {
+          // default layer
+          // size of brush
+          tap_code(!clockwise ? KC_RBRC : KC_LBRC);
+        } else {
+          // Fn Layer
+          // opacity of brush
+          tap_code16(!clockwise ? KC_RCBR : KC_LCBR);
+        }
+        break;
+      case WIN_CS_1:
+        if (currentLayer % 2 == 0) {
+          // default layer
+          // rotate canvas
+          tap_code(!clockwise ? KC_RBRC : KC_LBRC);
+        } else {
+          // Fn Layer
+          // opacity of brush
+          tap_code16(!clockwise ? C(KC_RBRC) : C(KC_LBRC));
+        }
+        break;
+      case WIN_PS_1:
+        if (currentLayer % 2 == 0) {
+          // default layer
+          // rotate canvas
+          tap_code(!clockwise ? KC_RBRC : KC_LBRC);
+        } else {
+          // Fn Layer
+          // opacity of brush
+          tap_code16(!clockwise ? KC_RCBR : KC_LCBR);
+        }
+        break;
+      case IOS_CS_1:
+        if (currentLayer % 2 == 0) {
+          // default layer
+          // size of brush
+          tap_code(!clockwise ? KC_BSLS : KC_RBRC);
+        } else {
+          // Fn Layer
+          // opacity of brush
+          tap_code16(!clockwise ? G(KC_BSLS) : G(KC_RBRC));
+        }
+        break;
+      default:
+        break;
+    }
+  }
+}
+
+// custom keycode
+// switch default layer
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case Mac_CS:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(MAC_CS_1);
+      }
+      return false;
+      break;
+    case Mac_PS:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(MAC_PS_1);
+      }
+      return false;
+      break;
+    case Win_CS:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(WIN_CS_1);
+      }
+      return false;
+      break;
+    case Win_PS:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(WIN_PS_1);
+      }
+      return false;
+      break;
+    case IOS_CS:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(IOS_CS_1);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+// OLED Display
+#ifdef OLED_DRIVER_ENABLE
+void oled_task_user(void) {
+  // get layer Number
+  uint8_t currentDefault = get_highest_layer(default_layer_state);
+  uint8_t currentLayer = get_highest_layer(layer_state);
+  // write OS mode / 1st line of the logo
+  switch (currentDefault) {
+    case MAC_CS_1:
+    case MAC_PS_1:
+      render_row(0, "Mac ");
+      break;
+    case WIN_CS_1:
+    case WIN_PS_1:
+      render_row(0, "Win ");
+      break;
+    case IOS_CS_1:
+      render_row(0, "iOS ");
+      break;
+    default:
+      render_row(0, "    ");
+  }
+
+  // write Application mode / 2nd line of the logo
+  switch (currentDefault) {
+    case MAC_CS_1:
+    case WIN_CS_1:
+    case IOS_CS_1:
+      render_row(1, "A:CS");
+      break;
+    case MAC_PS_1:
+    case WIN_PS_1:
+      render_row(1, "A:Ps");
+      break;
+    default:
+      render_row(1, "    ");
+  }
+
+  if (currentLayer == SETTING) {
+    // 3rd & 4th line of the logo
+    render_row(2, "****");
+    render_row(3, "LSEL");
+  } else {
+    // Layer Status / 3rd line of the logo
+    if (currentLayer % 2 == 0) {
+      // default layer
+      render_row(2, "L:DF");
+    } else {
+      // Fn Layer
+      render_row(2, "L:Fn");
+    }
+    // pressed key / 4th line of the logo
+    render_row(3, "    ");
+  }
+}
+#endif // #ifdef OLED_DRIVER_ENABLE

keyboards/palette1202/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Palette1202

keyboards/palette1202/keymaps/key-check/keymap.c

@@ -0,0 +1,150 @@
+/* Copyright 2019 niltea
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#ifdef OLED_DRIVER_ENABLE
+  #include <string.h>
+  #include "lib/oled_helper.h"
+#endif
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    KEY_01 = SAFE_RANGE,
+    KEY_02,
+    KEY_03,
+    KEY_04,
+    KEY_05,
+    KEY_06,
+    KEY_07,
+    KEY_08,
+    KEY_09,
+    KEY_10,
+    KEY_11,
+    KEY_12,
+    KEY_13,
+    KEY_14
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KEY_01, KEY_02, KEY_03, KEY_04, KEY_05,
+        KEY_06, KEY_07, KEY_08, KEY_09, KEY_10,
+                KEY_11, KEY_12, KEY_13, KEY_14
+    ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KEY_01:
+            if (record->event.pressed) {
+                SEND_STRING("R1C1");
+            }
+            break;
+        case KEY_02:
+            if (record->event.pressed) {
+                SEND_STRING("R1C2");
+            }
+            break;
+        case KEY_03:
+            if (record->event.pressed) {
+                SEND_STRING("R1C3");
+            }
+            break;
+        case KEY_04:
+            if (record->event.pressed) {
+                SEND_STRING("R1C4");
+            }
+            break;
+        case KEY_05:
+            if (record->event.pressed) {
+                SEND_STRING("ENCODER-UPPER:Button");
+            }
+            break;
+
+        case KEY_06:
+            if (record->event.pressed) {
+                SEND_STRING("R2C1");
+            }
+            break;
+        case KEY_07:
+            if (record->event.pressed) {
+                SEND_STRING("R2C2");
+            }
+            break;
+        case KEY_08:
+            if (record->event.pressed) {
+                SEND_STRING("R2C3");
+            }
+            break;
+
+        case KEY_09:
+            if (record->event.pressed) {
+                SEND_STRING("R2C4");
+            }
+            break;
+        case KEY_10:
+            if (record->event.pressed) {
+                SEND_STRING("ENCODER-LOWER:Button");
+            }
+            break;
+        case KEY_11:
+            if (record->event.pressed) {
+                SEND_STRING("R3C1");
+            }
+            break;
+        case KEY_12:
+            if (record->event.pressed) {
+                SEND_STRING("R3C2");
+            }
+            break;
+        case KEY_13:
+            if (record->event.pressed) {
+                SEND_STRING("R3C3");
+            }
+            break;
+        case KEY_14:
+            if (record->event.pressed) {
+                SEND_STRING("R3C4");
+            }
+            break;
+    }
+    return true;
+}
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (index == 0) { /* the upper encoder */
+    if (clockwise) {
+      SEND_STRING("ENCODER-UPPER:CW");
+    } else {
+      SEND_STRING("ENCODER-UPPER:CCW");
+    }
+  } else if (index == 1) { /* the lower encoder */
+    if (clockwise) {
+      SEND_STRING("ENCODER-LOWER:CW");
+    } else {
+      SEND_STRING("ENCODER-LOWER:CCW");
+    }
+  }
+}
+
+// OLED Display
+#ifdef OLED_DRIVER_ENABLE
+void oled_task_user(void) {
+  render_row(0, "TEST");
+  render_row(1, "test");
+  render_row(2, "TEST");
+  render_row(3, "test");
+}
+#endif // #ifdef OLED_DRIVER_ENABLE