Add gcc version detection to qmk doctor (#8338)

* New keyboard: split_65

* Updated readme

* Update with requested changes

* Add writePinLow to prevent flickering

* Renamed LAYOUT to LAYOUT_all

keyboards/handwired/jtallbean/readme.md

@@ -0,0 +1,4 @@
+# jtallbean
+QMK folders for relevant boards:
+
+split_65

keyboards/handwired/jtallbean/split_65/config.h

@@ -0,0 +1,255 @@
+/*
+Copyright 2020 jtallbean
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER jtallbean
+#define PRODUCT split_65
+#define DESCRIPTION Split ergonomic keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 10 // Double rows for split keyboards. split_65 has 5, so define 10
+#define MATRIX_COLS 9
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F4, F1, F0, C7, B6 }
+#define MATRIX_COL_PINS { C6, B5, B4, D7, D6, D4, D2, D3, B7 } // B7 is not actually used, but it is needed since # of entries must equal 9
+#define MATRIX_ROW_PINS_RIGHT { E6, F0, F1, F7, D7 }
+#define MATRIX_COL_PINS_RIGHT { B4, B5, B6, C6, C7, D4, D6, D3, D2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+#define SPLIT_HAND_PIN D5
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+#endif
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/handwired/jtallbean/split_65/info.json

@@ -0,0 +1,88 @@
+{
+    "keyboard_name": "split_65",
+    "url": "",
+    "maintainer": "jtallbean",
+    "width": 18.25,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"x":0, "y":0},
+                {"label":"Esc", "x":1.25, "y":0},
+                {"label":"!", "x":2.25, "y":0},
+                {"label":"@", "x":3.25, "y":0},
+                {"label":"#", "x":4.25, "y":0},
+                {"label":"$", "x":5.25, "y":0},
+                {"label":"%", "x":6.25, "y":0},
+                {"label":"^", "x":7.25, "y":0},
+                {"label":"&", "x":9.25, "y":0},
+                {"label":"*", "x":10.25, "y":0},
+                {"label":"(", "x":11.25, "y":0},
+                {"label":")", "x":12.25, "y":0},
+                {"label":"_", "x":13.25, "y":0},
+                {"label":"+", "x":14.25, "y":0},
+                {"label":"~", "x":15.25, "y":0},
+                {"label":"Back", "x":16.25, "y":0},
+                {"label":"Insert", "x":17.25, "y":0},
+                {"label":"PgUp", "x":0, "y":1},
+                {"label":"Tab", "x":1.25, "y":1, "w":1.5},
+                {"label":"Q", "x":2.75, "y":1},
+                {"label":"W", "x":3.75, "y":1},
+                {"label":"E", "x":4.75, "y":1},
+                {"label":"R", "x":5.75, "y":1},
+                {"label":"T", "x":6.75, "y":1},
+                {"label":"Y", "x":8.75, "y":1},
+                {"label":"U", "x":9.75, "y":1},
+                {"label":"I", "x":10.75, "y":1},
+                {"label":"O", "x":11.75, "y":1},
+                {"label":"P", "x":12.75, "y":1},
+                {"label":"{", "x":13.75, "y":1},
+                {"label":"}", "x":14.75, "y":1},
+                {"label":"|", "x":15.75, "y":1, "w":1.5},
+                {"label":"Delete", "x":17.25, "y":1},
+                {"label":"PgDn", "x":0, "y":2},
+                {"label":"Caps Lock", "x":1.25, "y":2, "w":1.75},
+                {"label":"A", "x":3, "y":2},
+                {"label":"S", "x":4, "y":2},
+                {"label":"D", "x":5, "y":2},
+                {"label":"F", "x":6, "y":2},
+                {"label":"G", "x":7, "y":2},
+                {"label":"H", "x":9, "y":2},
+                {"label":"J", "x":10, "y":2},
+                {"label":"K", "x":11, "y":2},
+                {"label":"L", "x":12, "y":2},
+                {"label":":", "x":13, "y":2},
+                {"label":"\"", "x":14, "y":2},
+                {"label":"Enter", "x":15, "y":2, "w":2.25},
+                {"label":"Home", "x":17.25, "y":2},
+                {"label":"Fn", "x":0, "y":3},
+                {"label":"Shift", "x":1.25, "y":3, "w":2.25},
+                {"label":"Z", "x":3.5, "y":3},
+                {"label":"X", "x":4.5, "y":3},
+                {"label":"C", "x":5.5, "y":3},
+                {"label":"V", "x":6.5, "y":3},
+                {"label":"B", "x":7.5, "y":3},
+                {"label":"N", "x":9.5, "y":3},
+                {"label":"M", "x":10.5, "y":3},
+                {"label":"<", "x":11.5, "y":3},
+                {"label":">", "x":12.5, "y":3},
+                {"label":"?", "x":13.5, "y":3},
+                {"label":"Shift", "x":14.5, "y":3, "w":1.75},
+                {"label":"\u2191", "x":16.25, "y":3},
+                {"label":"End", "x":17.25, "y":3},
+                {"label":"Code", "x":0, "y":4},
+                {"label":"Ctrl", "x":1.25, "y":4, "w":1.25},
+                {"label":"Win", "x":2.5, "y":4, "w":1.25},
+                {"label":"Alt", "x":3.75, "y":4, "w":1.25},
+                {"x":5, "y":4, "w":2.75},
+                {"x":8.75, "y":4, "w":2.25},
+                {"label":"Alt", "x":11, "y":4, "w":1.25},
+                {"label":"Win", "x":12.25, "y":4, "w":1.25},
+                {"label":"Ctrl", "x":13.5, "y":4, "w":1.25},
+                {"label":"\u2190", "x":15.25, "y":4},
+                {"label":"\u2193", "x":16.25, "y":4},
+                {"label":"\u2192", "x":17.25, "y":4}
+            ]
+        }
+    }
+}

keyboards/handwired/jtallbean/split_65/keymaps/default/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2020 jtallbean
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _DN,
+    _UP
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT_all(
+      KC_NO,   KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSPC, KC_INS,
+      KC_PGUP, KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+      KC_PGDN, KC_CAPS,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_HOME,
+      MO(_UP), KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_END,
+      MO(_DN), KC_LCTL,          KC_LGUI, KC_LALT, KC_SPC,                    KC_SPC,           KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT,          KC_DOWN, KC_RGHT
+    ),
+    /* Down */
+    [_DN] = LAYOUT_all(
+      _______, KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, KC_MUTE,
+      _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU,
+      _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_VOLD,
+      _______, _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+      _______, _______,          _______, _______, _______,                   _______,          _______, _______, _______, _______,          _______, _______
+    ),
+    /* Up */
+    [_UP] = LAYOUT_all(
+      _______, _______, _______, _______, _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   _______, _______, _______, _______, _______, KC_MPLY,
+      _______, _______,          _______, _______, _______, _______, _______, _______, KC_P4,   KC_P5,   KC_P6,   _______, _______, _______, _______, KC_MNXT,
+      _______, _______,          _______, _______, _______, _______, _______, _______, KC_P1,   KC_P2,   KC_P3,   _______, _______,          _______, KC_MPRV,
+      _______, _______,          _______, _______, _______, _______, _______, _______, KC_P0,   _______, _______, _______, _______,          _______, KC_MSTP,
+      _______, _______,          _______, _______, _______,                   KC_P0,            _______, _______, _______, _______,          _______, _______
+    ),
+};

keyboards/handwired/jtallbean/split_65/keymaps/default/readme.md

@@ -0,0 +1,5 @@
+![split_65 layout image](https://i.imgur.com/LwyZlQo.png)
+
+# The default keymap for split_65
+
+This is the default layout that comes flashed on the split_65

keyboards/handwired/jtallbean/split_65/readme.md

@@ -0,0 +1,15 @@
+# split_65
+
+![split_65](https://i.imgur.com/hUTqwmv.png)
+
+split_65 is a split, 65% layout keyboard with left function column designed for improved ergonomics and comfort.
+
+* Keyboard Maintainer: [jtallbean](https://github.com/samlli)
+* Hardware Supported: split_65
+* Hardware Availability: N/A
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/jtallbean/split_65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/jtallbean/split_65/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+SPLIT_KEYBOARD = yes        # Enable split keyboard support

keyboards/handwired/jtallbean/split_65/split_65.c

@@ -0,0 +1,43 @@
+/* Copyright 2020 jtallbean
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "split_65.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+
+    // Set our LED pins as output
+    setPinOutput(B0);
+    writePinLow(B0);
+
+    matrix_init_user();
+}
+
+bool led_update_kb(led_t led_state) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+    bool res = led_update_user(led_state);
+    if(res) {
+        // writePin sets the pin high for 1 and low for 0.
+        writePin(B0, led_state.caps_lock);
+    }
+    return res;
+}

keyboards/handwired/jtallbean/split_65/split_65.h

@@ -0,0 +1,47 @@
+/* Copyright 2020 jtallbean
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+ #define LAYOUT_all( \
+   L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, R08, \
+   L10, L11,      L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, R18, \
+   L20, L21,      L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25,      R27, R28, \
+   L30, L31,      L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35,      R37, R38, \
+   L40, L41,      L43, L44, L45,           R40,      R42, R43, R44, R45,      R47, R48  \
+ ) \
+ { \
+   { L00,   L01,   L02,   L03,   L04,   L05,   L06,   L07,   KC_NO}, \
+   { L10,   L11,   KC_NO, L13,   L14,   L15,   L16,   L17,   KC_NO}, \
+   { L20,   L21,   KC_NO, L23,   L24,   L25,   L26,   L27,   KC_NO}, \
+   { L30,   L31,   KC_NO, L33,   L34,   L35,   L36,   L37,   KC_NO}, \
+   { L40,   L41,   KC_NO, L43,   L44,   L45,   KC_NO, KC_NO, KC_NO}, \
+   { R00,   R01,   R02,   R03,   R04,   R05,   R06,   R07,   R08  }, \
+   { R10,   R11,   R12,   R13,   R14,   R15,   R16,   R17,   R18  }, \
+   { R20,   R21,   R22,   R23,   R24,   R25,   KC_NO, R27,   R28  }, \
+   { R30,   R31,   R32,   R33,   R34,   R35,   KC_NO, R37,   R38  }, \
+   { R40,   KC_NO, R42,   R43,   R44,   R45,   KC_NO, R47,   R48  }  \
+ }

keyboards/matrix/noah/boards/noah_bd/board.mk

@@ -3,3 +3,7 @@ BOARDSRC = $(BOARD_PATH)/boards/noah_bd/board.c
 
 # Required include directories
 BOARDINC = $(BOARD_PATH)/boards/noah_bd
+
+# Shared variables
+ALLCSRC += $(BOARDSRC)
+ALLINC  += $(BOARDINC)

keyboards/matrix/noah/config.h

@@ -17,8 +17,12 @@
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 15
 
+#define MATRIX_ROW_PINS {  B0,  A1, C14, C13,  A0}
+#define MATRIX_COL_PINS { C15, B10,  B7,  B6,  B5,  B4, A15, A10,  A9,  A8, B15, B14, B13, B12,  B2}
+#define UNUSED_PINS
+
 #define DIODE_DIRECTION COL2ROW
-#define DEBOUNCING_DELAY 5
+#define DEBOUNCE    5
 
 // i2c setting
 #define USE_I2CV1
@@ -37,13 +41,11 @@
 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 
 /* indicator rgb */
-#define WS2812_LED_N 7
+#define RGBLED_NUM 7
-#define RGBLED_NUM WS2812_LED_N
 #define RGB_DI_PIN B1
 #define RGBLIGHT_ANIMATIONS
-//#define WS2812_EXTERNAL_PULLUP
 
 // tapping setting
-#define TAPPING_TERM 200
+//#define TAPPING_TERM 200
-#define RETRO_TAPPING
+//#define RETRO_TAPPING
-#define PERMISSIVE_HOLD
+//#define PERMISSIVE_HOLD

keyboards/matrix/noah/halconf.h

@@ -72,7 +72,7 @@
  * @brief   Enables the GPT subsystem.
  */
 #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                         TRUE
+#define HAL_USE_GPT                         FALSE
 #endif
 
 /**
@@ -114,7 +114,7 @@
  * @brief   Enables the PWM subsystem.
  */
 #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                         TRUE
+#define HAL_USE_PWM                         FALSE
 #endif
 
 /**

keyboards/matrix/noah/matrix.c

@@ -130,7 +130,7 @@ uint8_t matrix_scan(void)
         }
     }
 
-    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCING_DELAY) {
+    if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) {
         for (int row = 0; row < MATRIX_ROWS; row++) {
             matrix[row] = 0;
             for (int col = 0; col < MATRIX_COLS; col++) {

keyboards/matrix/noah/mcuconf.h

@@ -1,5 +1,5 @@
 /*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
 
     Licensed under the Apache License, Version 2.0 (the "License");
     you may not use this file except in compliance with the License.
@@ -57,13 +57,31 @@
 #define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
 #define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
 #define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
-#define STM32_I2SSRC                        STM32_I2SSRC_PLLI2S
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
 #define STM32_PLLI2SN_VALUE                 192
-#define STM32_PLLI2SR_VALUE                 2
+#define STM32_PLLI2SR_VALUE                 5
 #define STM32_PVD_ENABLE                    FALSE
 #define STM32_PLS                           STM32_PLS_LEV0
 #define STM32_BKPRAM_ENABLE                 FALSE
 
+/*
+ * IRQ system settings.
+ */
+#define STM32_IRQ_EXTI0_PRIORITY            6
+#define STM32_IRQ_EXTI1_PRIORITY            6
+#define STM32_IRQ_EXTI2_PRIORITY            6
+#define STM32_IRQ_EXTI3_PRIORITY            6
+#define STM32_IRQ_EXTI4_PRIORITY            6
+#define STM32_IRQ_EXTI5_9_PRIORITY          6
+#define STM32_IRQ_EXTI10_15_PRIORITY        6
+#define STM32_IRQ_EXTI16_PRIORITY           6
+#define STM32_IRQ_EXTI17_PRIORITY           15
+#define STM32_IRQ_EXTI18_PRIORITY           6
+#define STM32_IRQ_EXTI19_PRIORITY           6
+#define STM32_IRQ_EXTI20_PRIORITY           6
+#define STM32_IRQ_EXTI21_PRIORITY           15
+#define STM32_IRQ_EXTI22_PRIORITY           15
+
 /*
  * ADC driver system settings.
  */
@@ -74,22 +92,6 @@
 #define STM32_ADC_IRQ_PRIORITY              6
 #define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
 
-/*
- * EXT driver system settings.
- */
-#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
-#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
-#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
-#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
-#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
-#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
-
 /*
  * GPT driver system settings.
  */
@@ -164,9 +166,9 @@
  * PWM driver system settings.
  */
 #define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  TRUE
+#define STM32_PWM_USE_TIM1                  FALSE
 #define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_USE_TIM3                  FALSE
 #define STM32_PWM_USE_TIM4                  FALSE
 #define STM32_PWM_USE_TIM5                  FALSE
 #define STM32_PWM_USE_TIM9                  FALSE
@@ -182,11 +184,9 @@
  */
 #define STM32_SERIAL_USE_USART1             FALSE
 #define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USE_USART3             FALSE
 #define STM32_SERIAL_USE_USART6             FALSE
 #define STM32_SERIAL_USART1_PRIORITY        12
 #define STM32_SERIAL_USART2_PRIORITY        12
-#define STM32_SERIAL_USART3_PRIORITY        12
 #define STM32_SERIAL_USART6_PRIORITY        12
 
 /*
@@ -195,28 +195,18 @@
 #define STM32_SPI_USE_SPI1                  TRUE
 #define STM32_SPI_USE_SPI2                  FALSE
 #define STM32_SPI_USE_SPI3                  FALSE
-#define STM32_SPI_USE_SPI4                  FALSE
-#define STM32_SPI_USE_SPI5                  FALSE
 #define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
 #define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
 #define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
 #define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
 #define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
 #define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_SPI_SPI4_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 4)
-#define STM32_SPI_SPI4_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 1)
-#define STM32_SPI_SPI5_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 5)
-#define STM32_SPI_SPI5_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 6)
 #define STM32_SPI_SPI1_DMA_PRIORITY         1
 #define STM32_SPI_SPI2_DMA_PRIORITY         1
 #define STM32_SPI_SPI3_DMA_PRIORITY         1
-#define STM32_SPI_SPI4_DMA_PRIORITY         1
-#define STM32_SPI_SPI5_DMA_PRIORITY         1
 #define STM32_SPI_SPI1_IRQ_PRIORITY         10
 #define STM32_SPI_SPI2_IRQ_PRIORITY         10
 #define STM32_SPI_SPI3_IRQ_PRIORITY         10
-#define STM32_SPI_SPI4_IRQ_PRIORITY         10
-#define STM32_SPI_SPI5_IRQ_PRIORITY         10
 #define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
 
 /*
@@ -230,23 +220,18 @@
  */
 #define STM32_UART_USE_USART1               FALSE
 #define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USE_USART3               FALSE
 #define STM32_UART_USE_USART6               FALSE
 #define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
 #define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
 #define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
 #define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
-#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 1)
-#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
 #define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
 #define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
 #define STM32_UART_USART1_IRQ_PRIORITY      12
 #define STM32_UART_USART2_IRQ_PRIORITY      12
-#define STM32_UART_USART3_IRQ_PRIORITY      12
 #define STM32_UART_USART6_IRQ_PRIORITY      12
 #define STM32_UART_USART1_DMA_PRIORITY      0
 #define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_USART3_DMA_PRIORITY      0
 #define STM32_UART_USART6_DMA_PRIORITY      0
 #define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
 

keyboards/matrix/noah/noah.c

@@ -50,29 +50,20 @@ void rgblight_set(void) {
 }
 #endif
 
-void matrix_scan_kb(void) { matrix_scan_user(); }
+void matrix_init_kb(void) { matrix_init_user(); }
 
-void matrix_init_kb(void) {
-  matrix_init_user();
-}
 __attribute__((weak))
-void matrix_init_user(void) {
+void matrix_init_user(void) { }
-#ifdef RGBLIGHT_ENABLE
-  rgblight_enable();
-#endif
 
-#ifdef RGB_MATRIX_ENABLE
+void matrix_scan_kb(void) {
-  rgb_matrix_disable();
+#ifdef RGBLIGHT_ENABLE
+    rgblight_task();
 #endif
+    matrix_scan_user();
 }
 
 __attribute__((weak))
-void matrix_scan_user(void) {
+void matrix_scan_user(void) { }
-#ifdef RGBLIGHT_ENABLE
-  rgblight_task();
-#endif
-}
-
 
 #ifdef RGB_MATRIX_ENABLE
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
@@ -184,9 +175,9 @@ led_config_t g_led_config = {
         { 20, 16},{ 42, 32},
         { 45, 16},{ 50, 16},{ 65, 16},{ 80, 16},{ 95, 16},{ 70, 32},{ 84, 32},{ 98, 32},
 
-        { 14, 32},{ 56, 32},{ 50, 48},{ 80, 48},{110, 48},{ 95, 48},{100, 64},{112, 64},
+        { 14, 32},{ 56, 32},{ 65, 48},{ 80, 48},{110, 48},{ 95, 48},{112, 64},{100, 64},
         { 42, 32},{ 38, 64},
-        {  0, 32},{ 10, 48},{  0, 48},{ 20, 48},{ 35, 48},{ 65, 48},{  0, 64},{ 19, 64},
+        {  0, 32},{ 10, 48},{  0, 48},{ 20, 48},{ 35, 48},{ 50, 48},{  0, 64},{ 19, 64},
 
         {105,  0},{120,  0},{135,  0},{150,  0},{165,  0},{180,  0},{202,  0},{224,  0},
         {110, 16},{224, 16},

keyboards/matrix/noah/rules.mk

@@ -37,20 +37,18 @@ OPT_DEFS =
 #   comment out to disable the options.
 #
 BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no        # Mouse keys
+MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes	    # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 NKRO_ENABLE = no            # USB Nkey Rollover
-NO_USB_STARTUP_CHECK = yes   # Disable initialization only when usb is plugged in
+NO_USB_STARTUP_CHECK = yes	# Disable initialization only when usb is plugged in
 
-CUSTOM_MATRIX = yes
 RGB_MATRIX_ENABLE = yes
 
 RGBLIGHT_ENABLE = yes
 RGBLIGHT_CUSTOM_DRIVER = yes
 
+CUSTOM_MATRIX = yes
 # project specific files
-SRC += \
+SRC += ws2812.c matrix.c
-    matrix.c \
-    ws2812.c

lib/python/qmk/cli/doctor.py

@@ -11,7 +11,14 @@ from milc import cli
 from qmk import submodules
 from qmk.questions import yesno
 
-ESSENTIAL_BINARIES = ['dfu-programmer', 'avrdude', 'dfu-util', 'avr-gcc', 'arm-none-eabi-gcc', 'bin/qmk']
+ESSENTIAL_BINARIES = {
+    'dfu-programmer': {},
+    'avrdude': {},
+    'dfu-util': {},
+    'avr-gcc': {},
+    'arm-none-eabi-gcc': {},
+    'bin/qmk': {},
+}
 ESSENTIAL_SUBMODULES = ['lib/chibios', 'lib/lufa']
 
 
@@ -24,12 +31,42 @@ def _udev_rule(vid, pid=None):
         return 'SUBSYSTEMS=="usb", ATTRS{idVendor}=="%s", MODE:="0666"' % vid
 
 
+def check_arm_gcc_version():
+    """Returns True if the arm-none-eabi-gcc version is not known to cause problems.
+    """
+    if 'output' in ESSENTIAL_BINARIES['arm-none-eabi-gcc']:
+        first_line = ESSENTIAL_BINARIES['arm-none-eabi-gcc']['output'].split('\n')[0]
+        second_half = first_line.split(')', 1)[1].strip()
+        version_number = second_half.split()[0]
+        cli.log.info('Found arm-none-eabi-gcc version %s', version_number)
+
+    return True  # Right now all known arm versions are ok
+
+
+def check_avr_gcc_version():
+    """Returns True if the avr-gcc version is not known to cause problems.
+    """
+    if 'output' in ESSENTIAL_BINARIES['avr-gcc']:
+        first_line = ESSENTIAL_BINARIES['avr-gcc']['output'].split('\n')[0]
+        version_number = first_line.split()[2]
+
+        major, minor, rest = version_number.split('.', 2)
+        if int(major) > 8:
+            cli.log.error('We do not recommend avr-gcc newer than 8. Downgrading to 8.x is recommended.')
+            return False
+
+        cli.log.info('Found avr-gcc version %s', version_number)
+        return True
+
+    return False
+
+
 def check_binaries():
     """Iterates through ESSENTIAL_BINARIES and tests them.
     """
     ok = True
 
-    for binary in ESSENTIAL_BINARIES:
+    for binary in sorted(ESSENTIAL_BINARIES):
         if not is_executable(binary):
             ok = False
 
@@ -116,7 +153,9 @@ def is_executable(command):
         return False
 
     # Make sure the command can be executed
-    check = subprocess.run([command, '--version'], stdout=subprocess.PIPE, stderr=subprocess.PIPE, timeout=5)
+    check = subprocess.run([command, '--version'], stdout=subprocess.PIPE, stderr=subprocess.PIPE, timeout=5, universal_newlines=True)
+    ESSENTIAL_BINARIES[command]['output'] = check.stdout
+
     if check.returncode in [0, 1]:  # Older versions of dfu-programmer exit 1
         cli.log.debug('Found {fg_cyan}%s', command)
         return True
@@ -196,6 +235,13 @@ def doctor(cli):
     else:
         ok = False
 
+    # Make sure the tools are at the correct version
+    if not check_arm_gcc_version():
+        ok = False
+
+    if not check_avr_gcc_version():
+        ok = False
+
     # Check out the QMK submodules
     sub_ok = check_submodules()
 

quantum/keymap_extras/keymap_norwegian.h

@@ -13,44 +13,163 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef KEYMAP_NORWEGIAN_H
-#define KEYMAP_NORWEGIAN_H
 
-#include "keymap_nordic.h"
+#pragma once
 
-// There are slight differrences in the keyboards in the nordic contries
+#include "keymap.h"
 
-// Norwegian redifinitions from the nordic keyset
+// clang-format off
-#undef NO_ACUT
+
-#define NO_ACUT ALGR(NO_BSLS)  // ´
+/*
-#undef NO_AE
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
-#define NO_AE KC_QUOT  // æ
+ * │ | │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ + │ \ │       │
-#undef NO_BSLS
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
-#define NO_BSLS KC_EQL  // '\'
+ * │     │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ Å │ ¨ │     │
-#undef NO_CIRC
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
-#define NO_CIRC LSFT(KC_RBRC)  // ^
+ * │      │ A │ S │ D │ F │ G │ H │ J │ K │ L │ Ø │ Æ │ ' │    │
-#undef NO_GRV
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
-#define NO_GRV LSFT(NO_BSLS)  //
+ * │    │ < │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ - │          │
-#undef NO_OSLH
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
-#define NO_OSLH KC_SCLN  // ø
+ * │    │    │    │                        │    │    │    │    │
-#undef NO_PIPE
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
 #define NO_PIPE KC_GRV  // |
+#define NO_1    KC_1    // 1
+#define NO_2    KC_2    // 2
+#define NO_3    KC_3    // 3
+#define NO_4    KC_4    // 4
+#define NO_5    KC_5    // 5
+#define NO_6    KC_6    // 6
+#define NO_7    KC_7    // 7
+#define NO_8    KC_8    // 8
+#define NO_9    KC_9    // 9
+#define NO_0    KC_0    // 0
+#define NO_PLUS KC_MINS // +
+#define NO_BSLS KC_EQL  // (backslash)
+// Row 2
+#define NO_Q    KC_Q    // Q
+#define NO_W    KC_W    // W
+#define NO_E    KC_E    // E
+#define NO_R    KC_R    // R
+#define NO_T    KC_T    // T
+#define NO_Y    KC_Y    // Y
+#define NO_U    KC_U    // U
+#define NO_I    KC_I    // I
+#define NO_O    KC_O    // O
+#define NO_P    KC_P    // P
+#define NO_ARNG KC_LBRC // Å
+#define NO_DIAE KC_RBRC // ¨ (dead)
+// Row 3
+#define NO_A    KC_A    // A
+#define NO_S    KC_S    // S
+#define NO_D    KC_D    // D
+#define NO_F    KC_F    // F
+#define NO_G    KC_G    // G
+#define NO_H    KC_H    // H
+#define NO_J    KC_J    // J
+#define NO_K    KC_K    // K
+#define NO_L    KC_L    // L
+#define NO_OSTR KC_SCLN // Ø
+#define NO_AE   KC_QUOT // Æ
+#define NO_QUOT KC_NUHS // '
+// Row 4
+#define NO_LABK KC_NUBS // <
+#define NO_Z    KC_Z    // Z
+#define NO_X    KC_X    // X
+#define NO_C    KC_C    // C
+#define NO_V    KC_V    // V
+#define NO_B    KC_B    // B
+#define NO_N    KC_N    // N
+#define NO_M    KC_M    // M
+#define NO_COMM KC_COMM // ,
+#define NO_DOT  KC_DOT  // .
+#define NO_MINS KC_SLSH // -
 
-// Additional norwegian keys not defined in the nordic keyset
+/* Shifted symbols
-#define NO_AA KC_LBRC          // å
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
-#define NO_ASTR LSFT(KC_BSLS)  // *
+ * │ § │ ! │ " │ # │ ¤ │ % │ & │ / │ ( │ ) │ = │ ? │ ` │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │   │   │   │   │   │   │   │   │   │   │   │ ^ │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │   │   │   │   │   │   │   │   │   │   │   │ * │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ > │   │   │   │   │   │   │   │ ; │ : │ _ │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
+#define NO_SECT S(NO_PIPE) // §
+#define NO_EXLM S(NO_1)    // !
+#define NO_DQUO S(NO_2)    // "
+#define NO_HASH S(NO_3)    // #
+#define NO_CURR S(NO_4)    // ¤
+#define NO_PERC S(NO_5)    // %
+#define NO_AMPR S(NO_6)    // &
+#define NO_SLSH S(NO_7)    // /
+#define NO_LPRN S(NO_8)    // (
+#define NO_RPRN S(NO_9)    // )
+#define NO_EQL  S(NO_0)    // =
+#define NO_QUES S(NO_PLUS) // ?
+#define NO_GRV  S(NO_BSLS) // ` (dead)
+// Row 2
+#define NO_CIRC S(NO_DIAE) // ^ (dead)
+// Row 3
+#define NO_ASTR S(NO_QUOT) // *
+// Row 4
+#define NO_RABK S(NO_LABK) // >
+#define NO_SCLN S(NO_COMM) // ;
+#define NO_COLN S(NO_DOT)  // :
+#define NO_UNDS S(NO_MINS) // _
 
-// Norwegian unique MAC characters
+/* AltGr symbols
-#define NO_ACUT_MAC KC_EQL            // =
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
-#define NO_APOS_MAC KC_NUBS           // '
+ * │   │   │ @ │ £ │ $ │ € │   │ { │ [ │ ] │ } │   │ ´ │       │
-#define NO_AT_MAC KC_BSLS             // @
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
-#define NO_BSLS_MAC ALGR(LSFT(KC_7))  // '\'
+ * │     │   │   │   │   │   │   │   │   │   │   │   │ ~ │     │
-#define NO_DLR_MAC LSFT(KC_4)         // $
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
-#define NO_GRV_MAC ALGR(NO_BSLS)      // `
+ * │      │   │   │   │   │   │   │   │   │   │   │   │   │    │
-#define NO_GRTR_MAC LSFT(KC_GRV)      // >
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
-#define NO_LCBR_MAC ALGR(LSFT(KC_8))  // }
+ * │    │   │   │   │   │   │   │   │ µ │   │   │   │          │
-#define NO_LESS_MAC KC_GRV            // >
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
-#define NO_PIPE_MAC ALGR(KC_7)        // |
+ * │    │    │    │                        │    │    │    │    │
-#define NO_RCBR_MAC ALGR(LSFT(KC_9))  // }
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
+#define NO_AT   ALGR(NO_2)    // @
+#define NO_PND  ALGR(NO_3)    // £
+#define NO_DLR  ALGR(NO_4)    // $
+#define NO_EURO ALGR(NO_5)    // €
+#define NO_LCBR ALGR(NO_7)    // {
+#define NO_LBRC ALGR(NO_8)    // [
+#define NO_RBRC ALGR(NO_9)    // ]
+#define NO_RCBR ALGR(NO_0)    // }
+#define NO_ACUT ALGR(NO_BSLS) // ´ (dead)
+// Row 2
+#define NO_TILD ALGR(NO_DIAE) // ~ (dead)
+// Row 4
+#define NO_MICR ALGR(NO_M)    // µ
 
-#endif
+// DEPRECATED
+#define NO_AM       NO_ARNG
+#define NO_AA       NO_ARNG
+#define NO_OSLH     NO_OSTR
+#define NO_APOS     NO_QUOT
+#define NO_LESS     NO_LABK
+#define NO_QUO2     NO_DQUO
+#define NO_BULT     NO_CURR
+#define NO_GRTR     NO_RABK
+#define NO_MU       NO_MICR
+// Norwegian macOS symbols
+#define NO_ACUT_MAC NO_BSLS       // ´
+#define NO_APOS_MAC NO_LABK       // '
+#define NO_AT_MAC   NO_QUOT       // @
+#define NO_BSLS_MAC S(ALGR(NO_7)) // (backslash)
+#define NO_DLR_MAC  S(NO_4)       // $
+#define NO_GRV_MAC  ALGR(NO_BSLS) // `
+#define NO_GRTR_MAC S(NO_PIPE)    // >
+#define NO_LCBR_MAC S(ALGR(NO_8)) // {
+#define NO_LESS_MAC NO_PIPE       // <
+#define NO_PIPE_MAC ALGR(NO_7)    // |
+#define NO_RCBR_MAC S(ALGR(NO_9)) // }

quantum/keymap_extras/sendstring_norwegian.h

@@ -0,0 +1,100 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Sendstring lookup tables for Norwegian layouts
+
+#pragma once
+
+#include "keymap_norwegian.h"
+#include "quantum.h"
+
+// clang-format off
+
+const uint8_t ascii_to_shift_lut[16] PROGMEM = {
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+
+    KCLUT_ENTRY(0, 1, 1, 1, 0, 1, 1, 0),
+    KCLUT_ENTRY(1, 1, 1, 0, 0, 0, 0, 1),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 1, 1, 0, 1, 1, 1),
+    KCLUT_ENTRY(0, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 0, 0, 0, 1, 1),
+    KCLUT_ENTRY(1, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0)
+};
+
+const uint8_t ascii_to_altgr_lut[16] PROGMEM = {
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+
+    KCLUT_ENTRY(0, 0, 0, 0, 1, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(1, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 1, 0, 1, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 1, 0, 1, 1, 0)
+};
+
+const uint8_t ascii_to_keycode_lut[128] PROGMEM = {
+    // NUL   SOH      STX      ETX      EOT      ENQ      ACK      BEL
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    // BS    TAB      LF       VT       FF       CR       SO       SI
+    KC_BSPC, KC_TAB,  KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    // DLE   DC1      DC2      DC3      DC4      NAK      SYN      ETB
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    // CAN   EM       SUB      ESC      FS       GS       RS       US
+    XXXXXXX, XXXXXXX, XXXXXXX, KC_ESC,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+
+    //       !        "        #        $        %        &        '
+    KC_SPC,  NO_1,    NO_2,    NO_3,    NO_4,    NO_5,    NO_6,    NO_QUOT,
+    // (     )        *        +        ,        -        .        /
+    NO_8,    NO_9,    NO_QUOT, NO_PLUS, NO_COMM, NO_MINS, NO_DOT,  NO_7,
+    // 0     1        2        3        4        5        6        7
+    NO_0,    NO_1,    NO_2,    NO_3,    NO_4,    NO_5,    NO_6,    NO_7,
+    // 8     9        :        ;        <        =        >        ?
+    NO_8,    NO_9,    NO_DOT,  NO_COMM, NO_LABK, NO_0,    NO_LABK, NO_PLUS,
+    // @     A        B        C        D        E        F        G
+    NO_2,    NO_A,    NO_B,    NO_C,    NO_D,    NO_E,    NO_F,    NO_G,
+    // H     I        J        K        L        M        N        O
+    NO_H,    NO_I,    NO_J,    NO_K,    NO_L,    NO_M,    NO_N,    NO_O,
+    // P     Q        R        S        T        U        V        W
+    NO_P,    NO_Q,    NO_R,    NO_S,    NO_T,    NO_U,    NO_V,    NO_W,
+    // X     Y        Z        [        \        ]        ^        _
+    NO_X,    NO_Y,    NO_Z,    NO_8,    NO_BSLS, NO_9,    NO_DIAE, NO_MINS,
+    // `     a        b        c        d        e        f        g
+    NO_BSLS, NO_A,    NO_B,    NO_C,    NO_D,    NO_E,    NO_F,    NO_G,
+    // h     i        j        k        l        m        n        o
+    NO_H,    NO_I,    NO_J,    NO_K,    NO_L,    NO_M,    NO_N,    NO_O,
+    // p     q        r        s        t        u        v        w
+    NO_P,    NO_Q,    NO_R,    NO_S,    NO_T,    NO_U,    NO_V,    NO_W,
+    // x     y        z        {        |        }        ~        DEL
+    NO_X,    NO_Y,    NO_Z,    NO_7,    NO_PIPE, NO_0,    NO_DIAE, KC_DEL
+};