CI - Fix change detection (#7038)

* Fix travis change detection

* Fix travis change detection - add back python ignore

.travis.yml

@@ -16,6 +16,7 @@ install:
   - npm install -g moxygen
 script:
   - git rev-parse --short HEAD
+  - git diff --name-only HEAD $TRAVIS_BRANCH
   - bash util/travis_test.sh
   - bash util/travis_build.sh
   - bash util/travis_docs.sh

keyboards/ares/ares.c

@@ -17,50 +17,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "ares.h"
 
-#ifdef RGBLIGHT_ENABLE
-
-#include <string.h>
-#include "i2c_master.h"
-#include "rgblight.h"
-
-extern rgblight_config_t rgblight_config;
-
-void matrix_init_kb(void) {
-  i2c_init();
-  // call user level keymaps, if any
-  matrix_init_user();
-}
-
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    memset(led, 0, 3 * RGBLED_NUM);
-  }
-
-  i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-  matrix_scan_user();
-}
-
-#endif
-
 #ifdef BACKLIGHT_ENABLE
 void backlight_init_ports(void) {
-    setPinOutput(D0);
+	setPinOutput(D0);
-    setPinOutput(D1);
+	setPinOutput(D1);
-    setPinOutput(D4);
+	setPinOutput(D4);
-    setPinOutput(D6);
+	setPinOutput(D6);
 }
 
 void backlight_set(uint8_t level) {
@@ -79,29 +41,3 @@ void backlight_set(uint8_t level) {
 	}
 }
 #endif
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-  matrix_init_user();
-}
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-  matrix_scan_user();
-}
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-  return process_record_user(keycode, record);
-}
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-  led_set_user(usb_led);
-}
-*/

keyboards/ares/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC += i2c_master.c

keyboards/donutcables/budget96/budget96.c

@@ -13,62 +13,9 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #include "budget96.h"
 
-#ifdef BACKLIGHT_ENABLE
-#include "backlight.h"
-#endif
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-#endif
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c_master.h"
-#include "quantum.h"
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
     setPinOutput(D0);
@@ -76,25 +23,25 @@ void backlight_init_ports(void) {
     setPinOutput(D4);
     setPinOutput(D6);
 
-     // turn RGB LEDs on
+    // turn backlight LEDs on
     writePinHigh(D0);
     writePinHigh(D1);
     writePinHigh(D4);
     writePinHigh(D6);
 }
 
- void backlight_set(uint8_t level) {
+void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
-        // turn RGB LEDs off
+        // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
-        // turn RGB LEDs on
+        // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
- }
+}

keyboards/donutcables/budget96/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,9 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-# custom matrix setup
-SRC = i2c_master.c

keyboards/eve/meteor/meteor.c

@@ -14,49 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "i2c_master.h"
+#include "meteor.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -73,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
         // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
         // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
 }

keyboards/eve/meteor/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = no
-RGBLIGHT_CUSTOM_DRIVER = no
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-QUANTUM_LIB_SRC = i2c_master.c

keyboards/exclusive/e6v2/le_bmc/le_bmc.c

@@ -13,49 +13,8 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "rgblight.h"
-#include "i2c_master.h"
-#include "quantum.h"
 
-#ifdef RGBLIGHT_ENABLE
+#include "le_bmc.h"
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -72,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
         // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
         // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
-}
+}

keyboards/exclusive/e6v2/le_bmc/rules.mk

@@ -24,7 +24,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
@@ -34,4 +34,3 @@ FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-SRC += i2c_master.c

keyboards/exclusive/e6v2/oe_bmc/oe_bmc.c

@@ -13,57 +13,8 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #include "oe_bmc.h"
-#include "rgblight.h"
-#include "i2c_master.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -72,7 +23,7 @@ void backlight_init_ports(void) {
     setPinOutput(D4);
     setPinOutput(D6);
 
-    // turn RGB LEDs on
+    // turn backlight LEDs on
     writePinHigh(D0);
     writePinHigh(D1);
     writePinHigh(D4);
@@ -80,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
-        // turn RGB LEDs off
+        // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
-        // turn RGB LEDs on
+        // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
 }

keyboards/exclusive/e6v2/oe_bmc/rules.mk

@@ -24,7 +24,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
@@ -34,4 +34,3 @@ FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-SRC += i2c_master.c

keyboards/exent/exent.c

@@ -15,76 +15,3 @@
  */
 
 #include "exent.h"
-
-#ifdef RGBLIGHT_ENABLE
-
-#    include <string.h>
-#    include "i2c_master.h"
-#    include "rgblight.h"
-
-extern rgblight_config_t rgblight_config;
-
-void matrix_init_kb(void) {
-    i2c_init();
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-// custom RGB driver
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        memset(led, 0, 3 * RGBLED_NUM);
-    }
-
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-    // if LEDs were previously on before poweroff, turn them back on
-    if (rgb_init == false && rgblight_config.enable) {
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-        rgb_init = true;
-    }
-
-    rgblight_task();
-    matrix_scan_user();
-}
-
-#endif
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-*/

keyboards/exent/rules.mk

@@ -19,10 +19,8 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
-SRC += i2c_master.c
-
 LAYOUTS = 65_ansi 65_iso

keyboards/facew/facew.c

@@ -16,51 +16,31 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "facew.h"
-#ifdef BACKLIGHT_ENABLE
-#include "backlight.h"
-#endif
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-#endif
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c_master.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
-	DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
+	setPinOutput(D0);
-	PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+	setPinOutput(D1);
+	setPinOutput(D4);
+	setPinOutput(D6);
+
+	writePinLow(D0);
+	writePinLow(D1);
+	writePinLow(D4);
+	writePinLow(D6);
 }
 
 void backlight_set(uint8_t level) {
 	if (level == 0) {
 		// Turn out the lights
-		PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinLow(D0);
+		writePinLow(D1);
+		writePinLow(D4);
+		writePinLow(D6);
 	} else {
 		// Turn on the lights
-		PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinHigh(D0);
+		writePinHigh(D1);
+		writePinHigh(D4);
+		writePinHigh(D6);
 	}
 }

keyboards/facew/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,11 +19,8 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
-# custom matrix setup
-SRC = i2c_master.c
-
 LAYOUTS = 60_ansi

keyboards/ft/mars80/mars80.c

@@ -16,50 +16,6 @@
 
 #include "mars80.h"
 
-#include "rgblight.h"
-#include "i2c_master.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
     setPinOutput(D0);
@@ -75,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
         // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
         // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
-}
+}

keyboards/ft/mars80/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2019 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,10 +19,8 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
-SRC += i2c_master.c
-
 LAYOUTS = tkl_ansi tkl_iso

keyboards/gray_studio/hb85/hb85.c

@@ -16,33 +16,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include <string.h>
+#include "hb85.h"
-
-#include "rgblight.h"
-
-#include "i2c_master.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -51,7 +25,7 @@ void backlight_init_ports(void) {
     setPinOutput(D4);
     setPinOutput(D6);
 
-    // turn RGB LEDs on
+    // turn backlight LEDs on
     writePinHigh(D0);
     writePinHigh(D1);
     writePinHigh(D4);
@@ -59,17 +33,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
-        // turn RGB LEDs off
+        // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
-        // turn RGB LEDs on
+        // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
 }

keyboards/gray_studio/hb85/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2019 fcoury <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC += i2c_master.c

keyboards/jj4x4/jj4x4.c

@@ -17,40 +17,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "jj4x4.h"
-
-#ifdef RGBLIGHT_ENABLE
-
-#include <string.h>
-#include "i2c_master.h"
-#include "rgblight.h"
-
-extern rgblight_config_t rgblight_config;
-
-void matrix_init_kb(void) {
-  i2c_init();
-  // call user level keymaps, if any
-  matrix_init_user();
-}
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    memset(led, 0, 3 * RGBLED_NUM);
-  }
-
-  i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-  matrix_scan_user();
-}
-
-#endif

keyboards/jj4x4/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -40,7 +25,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
@@ -48,6 +33,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
-SRC += i2c_master.c
-
 LAYOUTS = ortho_4x4

keyboards/kbdfans/kbdpad/mk1/mk1.c

@@ -14,7 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "quantum.h"
+#include "mk1.h"
 
 #define NUMLOCK_PIN D0
 

keyboards/kbdfans/kbdpad/mk1/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 

keyboards/panc60/panc60.c

@@ -13,52 +13,33 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #include "panc60.h"
-#ifdef BACKLIGHT_ENABLE
-#include "backlight.h"
-#endif
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-#endif
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c_master.h"
-#include "quantum.h"
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
 
 void backlight_init_ports(void) {
-	DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
+	setPinOutput(D0);
-	PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+	setPinOutput(D1);
+	setPinOutput(D4);
+	setPinOutput(D6);
+
+	writePinLow(D0);
+	writePinLow(D1);
+	writePinLow(D4);
+	writePinLow(D6);
 }
 
 void backlight_set(uint8_t level) {
 	if (level == 0) {
 		// Turn out the lights
-		PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinLow(D0);
+		writePinLow(D1);
+		writePinLow(D4);
+		writePinLow(D6);
 	} else {
 		// Turn on the lights
-		PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinHigh(D0);
+		writePinHigh(D1);
+		writePinHigh(D4);
+		writePinHigh(D6);
 	}
 }

keyboards/panc60/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -31,14 +16,11 @@ BOOTMAGIC_ENABLE = no
 MOUSEKEY_ENABLE = yes
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = yes
-COMMAND_ENABLE = yes
+COMMAND_ENABLE = no
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
-# custom matrix setup
-SRC = i2c_master.c
-
 LAYOUTS = 60_ansi 60_hhkb

keyboards/pearl/pearl.c

@@ -15,49 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "rgblight.h"
+#include "pearl.h"
-#include "i2c_master.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -74,17 +32,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
         // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
         // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
-}
+}

keyboards/pearl/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,9 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-# custom matrix setup
-SRC = i2c_master.c

keyboards/percent/skog_lite/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,10 +19,8 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
-SRC = i2c_master.c
-
 LAYOUTS = tkl_ansi

keyboards/percent/skog_lite/skog_lite.c

@@ -13,49 +13,8 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "rgblight.h"
-#include "i2c_master.h"
-#include "quantum.h"
 
-#ifdef RGBLIGHT_ENABLE
+#include "skog_lite.h"
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -72,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
         // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
         // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
 }

keyboards/singa/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC = i2c_master.c

keyboards/singa/singa.c

@@ -13,49 +13,8 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "rgblight.h"
-#include "i2c_master.h"
-#include "quantum.h"
 
-#ifdef RGBLIGHT_ENABLE
+#include "singa.h"
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -72,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
         // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
         // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
 }

keyboards/tgr/alice/alice.c

@@ -15,41 +15,4 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include <string.h>
+#include "alice.h"
-
-#include "rgblight.h"
-
-#include "i2c_master.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void matrix_init_kb(void) {
-  i2c_init();
-  // call user level keymaps, if any
-  matrix_init_user();
-}
-
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    memset(led, 0, 3 * RGBLED_NUM);
-  }
-
-  i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-  matrix_scan_user();
-}
-#endif

keyboards/tgr/alice/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC += i2c_master.c

keyboards/tgr/jane/jane.c

@@ -13,49 +13,8 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "i2c_master.h"
-#include "quantum.h"
 
-#ifdef RGBLIGHT_ENABLE
+#include "jane.h"
-#include "rgblight.h"
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -72,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
         // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
         // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
-}
+}

keyboards/tgr/jane/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,10 +19,8 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = no
-RGBLIGHT_CUSTOM_DRIVER = no
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
-QUANTUM_LIB_SRC = i2c_master.c
-
 LAYOUTS = tkl_ansi tkl_iso

keyboards/unikorn/readme.md

@@ -18,7 +18,6 @@ To enable RGB lighting support, install the necessary components and set RGBLIGH
 
 ```
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
 ```
 
 

keyboards/unikorn/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,8 +19,6 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = no
-RGBLIGHT_CUSTOM_DRIVER = no
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-SRC = i2c_master.c

keyboards/unikorn/unikorn.c

@@ -14,49 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "i2c_master.h"
+#include "unikorn.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -73,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
         // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
         // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
 }

keyboards/winkeyless/bface/bface.c

@@ -13,49 +13,8 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "rgblight.h"
-#include "i2c_master.h"
-#include "quantum.h"
 
-#ifdef RGBLIGHT_ENABLE
+#include "bface.h"
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-}
-#endif
-
-void matrix_init_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    if (rgblight_config.enable) {
-        i2c_init();
-        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
-    }
-#endif
-    // call user level keymaps, if any
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-#ifdef RGBLIGHT_ENABLE
-    rgblight_task();
-#endif
-    matrix_scan_user();
-    /* Nothing else for now. */
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
 
 void backlight_init_ports(void) {
     // initialize pins D0, D1, D4 and D6 as output
@@ -72,17 +31,17 @@ void backlight_init_ports(void) {
 }
 
 void backlight_set(uint8_t level) {
-	if (level == 0) {
+    if (level == 0) {
         // turn backlight LEDs off
         writePinLow(D0);
         writePinLow(D1);
         writePinLow(D4);
         writePinLow(D6);
-	} else {
+    } else {
         // turn backlight LEDs on
         writePinHigh(D0);
         writePinHigh(D1);
         writePinHigh(D4);
         writePinHigh(D6);
-	}
+    }
 }

keyboards/winkeyless/bface/bface.h

@@ -18,9 +18,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-#include "quantum_keycodes.h"
+#include "quantum.h"
-#include "keycode.h"
-#include "action.h"
 
 #define LAYOUT_60_ansi( \
   K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, \

keyboards/winkeyless/bface/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -36,9 +21,6 @@ BACKLIGHT_ENABLE = yes
 BACKLIGHT_CUSTOM_DRIVER = yes
 BACKLIGHT_BREATHING = no
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-
-# custom matrix setup
-SRC = i2c_master.c

tmk_core/protocol/usb_descriptor.c

@@ -431,7 +431,7 @@ const USB_Descriptor_Configuration_t PROGMEM
 
                                       .Refresh            = 0,
                                       .SyncEndpointNumber = 0},
-            .MIDI_In_Jack_Endpoint_SPC  = {.Header = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = AUDIO_DSUBTYPE_CSEndpoint_General}, .Subtype = AUDIO_DSUBTYPE_CSEndpoint_General, .TotalEmbeddedJacks = 0x01, .AssociatedJackID = {0x01}},
+            .MIDI_In_Jack_Endpoint_SPC  = {.Header = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = AUDIO_DTYPE_CSEndpoint}, .Subtype = AUDIO_DSUBTYPE_CSEndpoint_General, .TotalEmbeddedJacks = 0x01, .AssociatedJackID = {0x01}},
             .MIDI_Out_Jack_Endpoint     = {.Endpoint = {.Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, .EndpointAddress = MIDI_STREAM_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0x05},
 
                                        .Refresh            = 0,

util/travis_build.sh

@@ -1,57 +1,42 @@
 #!/bin/bash
 
-# if docker is installed - patch calls to within the qmk docker image
+source util/travis_utils.sh
-if command -v docker >/dev/null; then
+
-	function make() {
+NUM_CORE_CHANGES=$(echo "$QMK_CHANGES" | grep -Ecv -e '^(docs/)' -e '^(keyboards/)' -e '^(layouts/)' -e '^(util/)' -e '^(lib/python/)' -e '^(bin/qmk)' -e '^(requirements.txt)' -e '(.travis.yml)')
-		docker run --rm -e MAKEFLAGS="$MAKEFLAGS" -w /qmk_firmware/ -v "$PWD":/qmk_firmware --user $(id -u):$(id -g) qmkfm/base_container make "$@"
+
-	}
+if [[ "$TRAVIS_COMMIT_MESSAGE" == *"[skip build]"* ]]; then
+    echo "Skipping due to commit message"
+    exit 0
 fi
 
-# test force push
+if [ "$LOCAL_BRANCH" == "master" ] || [ "$NUM_CORE_CHANGES" != "0" ]; then
-#TRAVIS_COMMIT_RANGE="c287f1bfc5c8...81f62atc4c1d"
+    echo "Making default keymaps for all keyboards"
+    make all:default
+    exit $?
+fi
 
-TRAVIS_COMMIT_MESSAGE="${TRAVIS_COMMIT_MESSAGE:-none}"
+exit_code=0
-TRAVIS_COMMIT_RANGE="${TRAVIS_COMMIT_RANGE:-HEAD~1..HEAD}"
-MAKE_ALL="make all:default"
 
-if [[ "$TRAVIS_COMMIT_MESSAGE" != *"[skip build]"* ]] ; then
+for KB in $(make list-keyboards); do
-	exit_code=0
+	KEYBOARD_CHANGES=$(echo "$QMK_CHANGES" | grep -E '^(keyboards/'${KB}'/)')
-	git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE}
+	if [[ -z "$KEYBOARD_CHANGES" ]]; then
-	if [ $? -eq 128 ]; then
+		# skip as no changes for this keyboard
-		# We don't know what changed so just build the default keymaps
+		continue
-		echo "Making default keymaps for all keyboards (fallback)"
+	fi
-		eval $MAKE_ALL
+
+	KEYMAP_ONLY=$(echo "$KEYBOARD_CHANGES" | grep -cv /keymaps/)
+	if [[ $KEYMAP_ONLY -gt 0 ]]; then
+		echo "Making all keymaps for $KB"
+		make ${KB}:all
 		: $((exit_code = $exit_code + $?))
 	else
-		NEFM=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -Ev '^(keyboards/)' | grep -Ev '^(docs/)' | grep -Ev '^(lib/python/)' | grep -Ev '^(bin/qmk)' | grep -Ev '^(requirements.txt)' | grep -Ev '^(util/)' | wc -l)
+		CHANGED_KEYMAPS=$(echo "$KEYBOARD_CHANGES" | grep -oP '(?<=keyboards/'${KB}'/keymaps/)([a-zA-Z0-9_-]+)(?=\/)')
-		BRANCH=$(git rev-parse --abbrev-ref HEAD)
+		for KM in $CHANGED_KEYMAPS ; do
-		# is this branch master or a "non docs, non keyboards" change 
+			echo "Making $KM for $KB"
-		if [ $NEFM -gt 0 -o "$BRANCH" = "master" ]; then
+			make ${KB}:${KM}
-			echo "Making default keymaps for all keyboards"
-			eval $MAKE_ALL
 			: $((exit_code = $exit_code + $?))
-		else
+		done
-			# keyboards project format
-			#  /keyboards/board1/rev/keymaps/
-			#  /keyboards/board2/keymaps/
-			# ensure we strip everything off after and including the keymaps folder to get board and/or revision
-			MKB=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -oP '(?<=keyboards\/)([a-zA-Z0-9_\/]+)(?=\/)' | sed 's^/keymaps/.*^^' | sort -u)
-			for KB in $MKB ; do
-				KEYMAP_ONLY=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -Ev '^(keyboards/'${KB}'/keymaps/)' | wc -l)
-				if [[ $KEYMAP_ONLY -gt 0 ]]; then
-					echo "Making all keymaps for $KB"
-					make ${KB}:all
-					: $((exit_code = $exit_code + $?))
-				else
-					MKM=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -oP '(?<=keyboards/'${KB}'/keymaps/)([a-zA-Z0-9_]+)(?=\/)' | sort -u)
-					for KM in $MKM ; do
-						echo "Making $KM for $KB"
-						make ${KB}:${KM}
-						: $((exit_code = $exit_code + $?))
-					done
-				fi
-			done
-		fi
 	fi
-	exit $exit_code
+done
-fi
+
+exit $exit_code

util/travis_compiled_push.sh

@@ -1,5 +1,6 @@
 #!/bin/bash
 
+source util/travis_utils.sh
 source util/travis_push.sh
 
 set -o errexit -o nounset

util/travis_docs.sh

@@ -1,5 +1,6 @@
 #!/bin/bash
 
+source util/travis_utils.sh
 source util/travis_push.sh
 
 if [[ "$TRAVIS_COMMIT_MESSAGE" != *"[skip docs]"* ]] ; then 

util/travis_push.sh

@@ -1,10 +1,5 @@
 # Use this by sourcing it in your script.
 
-TRAVIS_BRANCH="${TRAVIS_BRANCH:master}"
-TRAVIS_PULL_REQUEST="${TRAVIS_PULL_REQUEST:false}"
-TRAVIS_COMMIT_MESSAGE="${TRAVIS_COMMIT_MESSAGE:-none}"
-TRAVIS_COMMIT_RANGE="${TRAVIS_COMMIT_RANGE:-HEAD~1..HEAD}"
-
 if [[ "$TRAVIS_BRANCH" == "master" && "$TRAVIS_PULL_REQUEST" == "false" ]] ; then
 	git config --global user.name "QMK Bot"
 	git config --global user.email "[email protected]"

util/travis_test.sh

@@ -1,26 +1,9 @@
 #!/bin/bash
 
-# if docker is installed - patch calls to within the qmk docker image
+source util/travis_utils.sh
-if command -v docker >/dev/null; then
-    function make() {
-        docker run --rm -e MAKEFLAGS="$MAKEFLAGS" -w /qmk_firmware/ -v "$PWD":/qmk_firmware --user $(id -u):$(id -g) qmkfm/base_container make "$@"
-    }
-    function qmk() {
-        docker run --rm -w /qmk_firmware/ -v "$PWD":/qmk_firmware --user $(id -u):$(id -g) qmkfm/base_container bin/qmk "$@"
-    }
-fi
 
-TRAVIS_COMMIT_MESSAGE="${TRAVIS_COMMIT_MESSAGE:-none}"
+NUM_CORE_CHANGES=$(echo "$QMK_CHANGES" | grep -Ecv -e '^(docs/)' -e '^(keyboards/)' -e '^(layouts/)' -e '^(util/)' -e '^(lib/python/)' -e '^(bin/qmk)' -e '^(requirements.txt)' -e '(.travis.yml)')
-TRAVIS_COMMIT_RANGE="${TRAVIS_COMMIT_RANGE:-HEAD~1..HEAD}"
+NUM_PY_CHANGES=$(echo "$QMK_CHANGES" | grep -Ec -e '^(lib/python/)' -e '^(bin/qmk)')
-
-# test force push
-#TRAVIS_COMMIT_RANGE="c287f1bfc5c8...81f62atc4c1d"
-
-BRANCH=$(git rev-parse --abbrev-ref HEAD)
-CHANGES=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE})
-
-NUM_CORE_CHANGES=$(echo "$CHANGES" | grep -Ecv -e '^(docs/)' -e '^(keyboards/)' -e '^(layouts/)')
-NUM_PY_CHANGES=$(echo "$CHANGES" | grep -Ec -e '^(lib/python/)' -e '^(bin/qmk)')
 
 if [[ "$TRAVIS_COMMIT_MESSAGE" == *"[skip test]"* ]]; then
     echo "Skipping due to commit message"
@@ -29,14 +12,14 @@ fi
 
 exit_code=0
 
-if [ "$BRANCH" == "master" ] || [ "$NUM_CORE_CHANGES" != "0" ]; then
+if [ "$LOCAL_BRANCH" == "master" ] || [ "$NUM_CORE_CHANGES" != "0" ]; then
     echo "Running tests."
     make test:all
     : $((exit_code = $exit_code + $?))
 
 fi
 
-if [ "$BRANCH" == "master" ] || [ "$NUM_PY_CHANGES" != "0" ]; then
+if [ "$LOCAL_BRANCH" == "master" ] || [ "$NUM_PY_CHANGES" != "0" ]; then
     echo "Running python tests."
     qmk pytest
     : $((exit_code = $exit_code + $?))

util/travis_utils.sh

@@ -0,0 +1,24 @@
+# Use this by sourcing it in your script.
+
+# Provide sane defaults for travis environment
+TRAVIS_BRANCH="${TRAVIS_BRANCH:master}"
+TRAVIS_PULL_REQUEST="${TRAVIS_PULL_REQUEST:false}"
+TRAVIS_COMMIT_MESSAGE="${TRAVIS_COMMIT_MESSAGE:-none}"
+TRAVIS_COMMIT_RANGE="${TRAVIS_COMMIT_RANGE:-HEAD~1..HEAD}"
+
+# test force push
+#TRAVIS_COMMIT_RANGE="c287f1bfc5c8...81f62atc4c1d"
+
+# Extra variables
+LOCAL_BRANCH=${TRAVIS_PULL_REQUEST_BRANCH:-${TRAVIS_BRANCH}}
+QMK_CHANGES=$(git diff --name-only HEAD ${TRAVIS_BRANCH})
+
+# if docker is installed - patch calls to within the qmk docker image
+if command -v docker >/dev/null; then
+    function make() {
+        docker run --rm -e MAKEFLAGS="$MAKEFLAGS" -w /qmk_firmware/ -v "$PWD":/qmk_firmware --user $(id -u):$(id -g) qmkfm/base_container make "$@"
+    }
+    function qmk() {
+        docker run --rm -w /qmk_firmware/ -v "$PWD":/qmk_firmware --user $(id -u):$(id -g) qmkfm/base_container bin/qmk "$@"
+    }
+fi