Move running pytest to travis_test (#7005)

* Cleanup rules.mk for 32U4 keyboards, G

* Update keyboards/gray_studio/cod67/rules.mk

docs/config_options.md

@@ -267,6 +267,14 @@ There are a few different ways to set handedness for split keyboards (listed in
     * 4: about 26kbps
     * 5: about 20kbps
 
+* `#define SPLIT_USB_DETECT`
+  * Detect (with timeout) USB connection when delegating master/slave
+  * Default behavior for ARM
+  * Required for AVR Teensy
+
+* `#define SPLIT_USB_TIMEOUT 2500`
+  * Maximum timeout when detecting master/slave when using `SPLIT_USB_DETECT`
+
 # The `rules.mk` File
 
 This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.

docs/feature_key_lock.md

@@ -16,7 +16,7 @@ First, enable Key Lock by setting `KEY_LOCK_ENABLE = yes` in your `rules.mk`. Th
 
 ## Caveats
 
-Key Lock is only able to hold standard action keys and [One Shot modifier](quantum_keycodes.md#one-shot-keys) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
+Key Lock is only able to hold standard action keys and [One Shot modifier](feature_advanced_keycodes.md#one-shot-keys) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
 This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as `KC_LPRN`. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held.
 
 Switching layers will not cancel the Key Lock.

docs/feature_split_keyboard.md

@@ -190,6 +190,18 @@ This sets how many LEDs are directly connected to each controller.  The first nu
 ?> This setting implies that `RGBLIGHT_SPLIT` is enabled, and will forcibly enable it, if it's not.
 
 
+```c
+#define SPLIT_USB_DETECT
+```
+This option changes the startup behavior to detect an active USB connection when delegating master/slave. If this operation times out, then the half is assume to be a slave. This is the default behavior for ARM, and required for AVR Teensy boards (due to hardware limitations).
+
+?> This setting will stop the ability to demo using battery packs.
+
+```c
+#define SPLIT_USB_TIMEOUT 2500
+```
+This sets the maximum timeout when detecting master/slave when using `SPLIT_USB_DETECT`.
+
 ## Additional Resources
 
 Nicinabox has a [very nice and detailed guide](https://github.com/nicinabox/lets-split-guide) for the Let's Split keyboard, that covers most everything you need to know, including troubleshooting information. 

docs/feature_tap_dance.md

@@ -447,9 +447,6 @@ int cur_dance (qk_tap_dance_state_t *state);
 //Functions associated with individual tap dances
 void ql_finished (qk_tap_dance_state_t *state, void *user_data);
 void ql_reset (qk_tap_dance_state_t *state, void *user_data);
-
-//Declare variable to track which layer is active
-int active_layer;
 ```
 
 Towards the bottom of your `keymap.c`, include the following code:

docs/fr-FR/ChangeLog/20190830.md

@@ -0,0 +1,52 @@
+# QMK Breaking Change - 30 août 2019
+
+Quatre fois par an, QMK lance un processus pour fusionner les Breaking Changes. Un Breaking Change est un changement qui modifie la manière dont QMK fonctionne introduisant des incompatibilités ou des comportements dangereux. Nous n'effectuons ces changements que 4 fois par an afin que les utilisateurs n'aient pas peur de casser leurs keymaps en mettant à jour leur version de QMK.
+
+Ce document présente les fusions de Breaking Change. Voici la liste des changements.
+
+## Formattage de code Core avec clang-format
+
+* Tous les fichiers core (`drivers/`, `quantum/`, `tests/`, et `tmk_core/`) seront formattés avec clang-format
+* Un processus travis pour reformatter les PRs lors de la fusion a été mis en place
+* Vous pouvez utiliser la nouvelle commande CLI `qmk cformat` afin de formatter avant de soumettre votre PR si vous le souhaitez.
+
+## Nettoyage des descripteurs LUFA USB
+
+* Nettoyage du code lié aux descripteurs USB HID sur les claviers AVR, afin de les rendre plus simple à lire et compréhensibles
+* Plus d'information:  https://github.com/qmk/qmk_firmware/pull/4871
+* Normalement pas de changement de fonctionnement et aucune keymap modifiée.
+
+## Migration des entrées de `ACTION_LAYER_MOMENTARY()` dans `fn_actions` vers des keycodes `MO()`
+
+* `fn_actions` est déprécié, et ses fonctionnalités ont été remplacées par des keycodes directs et `process_record_user()`
+* Supprimer cette fonctionnalité obsolète devrait aboutir à une réduction importante de la taille du firmware et de la complexité du code
+* Il est recommandé que toutes les keymaps affectées remplacent `fn_actions` vers les fonctionnalités de [keycode custom](https://docs.qmk.fm/#/custom_quantum_functions) et [macro](https://docs.qmk.fm/#/feature_macros)
+
+## Mise à jour Atreus vers les conventions de codage courantes
+
+* Les doublons include guards ont contourné le comportement de traitement des headers attendu
+* Il est recommandé pour toutes les keymaps affectées de supprimer le doublon de `<keyboard>/config.h` et `<keyboard>/keymaps/<user>/config.h` et de ne garder que des surcharges au niveau keymap
+
+## Récupération des changements de fichier keymap langage de la fork ZSA
+
+* Corrige une issue dans le fichier `keymap_br_abnt2.h` qui inclut la mauvaise souce (`keymap_common.h` au lieu de `keymap.h`)
+* Met à jour le fichier `keymap_swedish.h` afin d'être spécifique au suédois et plus "nordique" en général.
+* Toutes les keymaps qui utilisent ceci devront supprimer `NO_*` et le remplacer par `SE_*`.
+
+## Mise à jour du repo afin d'utiliser LUFA comme un sous-module git
+
+* `/lib/LUFA` supprimé du dépôt
+* LUFA, définis comme un sous-module, pointe vers qmk/lufa
+* Ceci devrait ajouter plus de flexibilité vers LUFA, et nous permet de garder le sous-module à jour bien plus facilement. Il avait environ 2 ans de retard, sans manière simple de corriger. Ce changement devrait simplifier la mise à jour dans le futur.
+
+## Migration des entrées `ACTION_BACKLIGHT_*()` dans `fn_actions` vers des keycodes `BL_`
+
+* `fn_actions` est déprécié, et ses fonctionnalités ont été remplacées par des keycodes directs et `process_record_user()`
+* Toutes les keymaps utilisant ces actions doivent avoir les clés `KC_FN*` remplacées par les clés `BL_*` équivalentes
+* Si vous utilisez actuellement `KC_FN*` vous devrez remplacer `fn_actions` avec les fonctionnalités de [keycode custom](https://docs.qmk.fm/#/custom_quantum_functions) et [macro](https://docs.qmk.fm/#/feature_macros)
+
+## Remplacer l'alias `KC_DELT` par `KC_DEL`
+
+* `KC_DELT` était un alias redondant et non documenté pour `KC_DELETE`
+* Il a été supprimé et toutes ses utilisations ont été remplacées par l'alias plus courant `KC_DEL`
+* Environ 90 keymaps (surtout des boards ErgoDox) ont été modifiées à cette fin

docs/fr-FR/_summary.md

@@ -16,10 +16,10 @@
   * [Comment utiliser GitHub](fr-FR/getting_started_github.md)
   * [Trouver de l'aide](fr-FR/getting_started_getting_help.md)
 
-**En Anglais**
+* [Breaking changes](fr-FR/breaking_changes.md)
+  * [30 août 2019](fr-FR/ChangeLog/20190830.md)
 
-* [Changements non rétro-compatibles](breaking_changes.md)
+**En Anglais**
-  * [30 Aout 2019](ChangeLog/20190830.md)
 
 * [FAQ](faq.md)
   * [FAQ Générale](faq_general.md)

docs/fr-FR/breaking_changes.md

@@ -0,0 +1,107 @@
+# Breaking changes
+
+Ce document décrit le processus de QMK pour la gestion des breaking changes. Un breaking change est un changement qui modifie la manière dont QMK fonctionne introduisant des incompatibilités ou des comportements dangereux. Nous limitons ces changements afin que les utilisateurs n'aient pas peur de casser leurs keymaps en mettant à jour leur version de QMK.
+
+La période de breaking change est quand nous allons fusionner un PR qui change QMK d'une manière dangereuse ou inattendue. Il y a une période interne de test afin de nous assurer que les problèmes résiduels sont rares ou impossible à prévoir.
+
+## Qu'est-ce qui a été inclus dans des Breaking Changes précédents?
+
+* [30 août 2019](ChangeLog/20190830.md)
+
+## Quand va être le prochain Breaking Change?
+
+Le prochain Breaking Change est planifié pour le 29 novembre.
+
+### Dates importantes
+
+* [x] 21 septembre 2019 - `future` est créé. Il va être rebasé de manière hebdomadaire.
+* [ ] 01 novembre 2019 - `future` fermé aux nouveaux PRs.
+* [ ] 01 novembre 2019 - Appel aux testeurs.
+* [ ] 27 novembre 2019 - `master` est bloqué, pas de PRs fusionnés.
+* [ ] 29 novembre 2019 - `future` est fusionné dans `master`.
+* [ ] 30 novembre 2019 - `master` est débloqué. Les PRs peuvent à nouveau être fusionnés.
+
+## Quels changements seront inclus?
+
+Pour voir une liste de candidats de breaking changes, vous pouvez regardez la liste des [labels `breaking_change`](https://github.com/qmk/qmk_firmware/pulls?q=is%3Aopen+label%3Abreaking_change+is%3Apr). De nouveaux changements peuvent être ajoutés entre maintenant et lorsque `future` est fermée, et un PR avec ce label n'est pas garanti d'être fusionné.
+
+Si vous souhaitez que votre breaking change soit inclus dans ce tour, vous devez créer un PR avec le label `breaking_change` et faire en sorte qu'il soit accepté avant que `future` ne soit fermé. Une fois `future` fermé, aucun nouveau breaking change sera accepté.
+
+Critère d'acceptation:
+
+* Le PR est complété et prêt à fusionner
+* Le PR a un ChangeLog
+
+# Checklists
+
+Cette section documente plusieurs processus que nous utilisons en lançant le processus de Breaking Change.
+
+## Rebase `future` de `master`
+
+Ceci est lancé chaque vendredi tant que `future` est ouvert.
+
+Processus:
+
+```
+cd qmk_firmware
+git checkout master
+git pull --ff-only
+git checkout future
+git rebase master
+git push --force
+```
+
+## Créer la branche `future`
+
+Ceci est fait immédiatement après la fusion de la branche `future` précédente.
+
+* `qmk_firmware` git commands
+    * [ ] `git checkout master`
+    * [ ] `git pull --ff-only`
+    * [ ] `git checkout -b future`
+    * [ ] Modifie `readme.md`
+        * [ ] Ajoute un message en haut qui indique que c'est une branche de test.
+        * [ ] Ajoute un lien vers ce document
+    * [ ] `git commit -m 'Branch point for <DATE> Breaking Change'`
+    * [ ] `git tag breakpoint_<YYYY>_<MM>_<DD>`
+    * [ ] `git tag <next_version>` # Evite que le label point d'arrêt soit confondu par un incrément de version
+    * [ ] `git push origin future`
+    * [ ] `git push --tags`
+
+## 4 Semaines Avant la Fusion
+
+* `future` est maintenant fermé aux nouveaux PRs, seul des correctifs pour les PRs courants peuvent être mergés
+* Envoi de l'appel aux testeurs
+    * [ ] Discord
+    * [ ] GitHub PR
+    * [ ] https://reddit.com/r/olkb
+
+## 1 Semaine Avant la Fusion
+
+* Annonce que master sera fermée entre <2 jours avant> à <Jour de la fusion>
+    * [ ] Discord
+    * [ ] GitHub PR
+    * [ ] https://reddit.com/r/olkb
+
+## 2 Jours Avant la Fusion
+
+* Annonce que master est fermé pour 2 jours
+    * [ ] Discord
+    * [ ] GitHub PR
+    * [ ] https://reddit.com/r/olkb
+
+## Jour de la fusion
+
+* `qmk_firmware` git commands
+    * [ ] `git checkout future`
+    * [ ] `git pull --ff-only`
+    * [ ] `git rebase origin/master`
+    * [ ] Modifie `readme.md`
+        * [ ] Supprimer les notes à propos de `future`
+    * [ ] Regroupe ChangeLog dans un fichier.
+    * [ ] `git commit -m 'Merge point for <DATE> Breaking Change'`
+    * [ ] `git push origin future`
+* Actions sur Github
+    * [ ] Crée un PR pour `future`
+    * [ ] S'assurer que Travis ne relève aucun problème
+    * [ ] Fusion le PR `future`

drivers/arm/i2c_master.c

@@ -32,27 +32,17 @@
 
 static uint8_t i2c_address;
 
-// ChibiOS uses two initialization structure for v1 and v2/v3 i2c APIs.
-// The F1 series uses the v1 api, which have to initialized this way.
-#ifdef STM32F103xB
-static const I2CConfig i2cconfig = {
-  OPMODE_I2C,
-  400000,
-  FAST_DUTY_CYCLE_2,
-};
-#else
-// This configures the I2C clock to 400khz assuming a 72Mhz clock
-// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
 static const I2CConfig i2cconfig = {
 #ifdef USE_I2CV1
     I2C1_OPMODE,
     I2C1_CLOCK_SPEED,
     I2C1_DUTY_CYCLE,
 #else
+    // This configures the I2C clock to 400khz assuming a 72Mhz clock
+    // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
     STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
 #endif
 };
-#endif
 
 static i2c_status_t chibios_to_qmk(const msg_t* status) {
     switch (*status) {

keyboards/aeboards/aegis/config.h

@@ -47,8 +47,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-//#define WT_MONO_BACKLIGHT
-
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
 // EEPROM usage

keyboards/aeboards/ext65/config.h

@@ -47,8 +47,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-//#define WT_MONO_BACKLIGHT
-
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
 // EEPROM usage

keyboards/angel17/alpha/rules.mk

@@ -1,27 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/angel17/rev1/rules.mk

@@ -1,27 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/bm43a/bm43a.c

@@ -0,0 +1,51 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bm43a.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/bm43a/bm43a.h

@@ -0,0 +1,30 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B,   \
+    K10,  K11, K12, K13, K14, K15, K16, K17, K18, K19, K1B,       \
+    K20,      K21, K22, K23, K24, K25, K26, K27, K28, K29, K2B,   \
+    K30, K31, K32, K33,         K35,        K37, K38, K39, K3B    \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   KC_NO, K1B   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   KC_NO, K2B   }, \
+    { K30,   K31,   K32,   K33,   KC_NO, K35,   KC_NO, K37,   K38,   K39,   KC_NO, K3B   }, \
+}

keyboards/bm43a/config.h

@@ -0,0 +1,73 @@
+/*
+Copyright 2019 mechmerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KPRepublic
+#define PRODUCT         BM43A
+#define DESCRIPTION     A QMK-powered custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D1, F4, F1, F0 }
+#define MATRIX_COL_PINS { B0, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
+
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+    #define RGBLED_NUM 10
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+    #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+    #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//     #define RGBLIGHT_EFFECT_BREATHING
+//     #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//     #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//     #define RGBLIGHT_EFFECT_SNAKE
+//     #define RGBLIGHT_EFFECT_KNIGHT
+//     #define RGBLIGHT_EFFECT_CHRISTMAS
+//     #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//     #define RGBLIGHT_EFFECT_RGB_TEST
+//     #define RGBLIGHT_EFFECT_ALTERNATING
+#endif

keyboards/bm43a/info.json

@@ -0,0 +1,58 @@
+{
+    "keyboard_name": "BM43A",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 12,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "key_count": 43,
+            "layout": [
+                {"label":"K00 (D1,B0)", "x":0, "y":0},
+                {"label":"K01 (D1,F5)", "x":1, "y":0},
+                {"label":"K02 (D1,F6)", "x":2, "y":0},
+                {"label":"K03 (D1,F7)", "x":3, "y":0},
+                {"label":"K04 (D1,C7)", "x":4, "y":0},
+                {"label":"K05 (D1,C6)", "x":5, "y":0},
+                {"label":"K06 (D1,B6)", "x":6, "y":0},
+                {"label":"K07 (D1,B5)", "x":7, "y":0},
+                {"label":"K08 (D1,B4)", "x":8, "y":0},
+                {"label":"K09 (D1,D7)", "x":9, "y":0},
+                {"label":"K0A (D1,D6)", "x":10, "y":0},
+                {"label":"K0B (D1,D4)", "x":11, "y":0},
+                {"label":"K10 (F4,B0)", "x":0, "y":1, "w":1.25},
+                {"label":"K11 (F4,F5)", "x":1.25, "y":1},
+                {"label":"K12 (F4,F6)", "x":2.25, "y":1},
+                {"label":"K13 (F4,F7)", "x":3.25, "y":1},
+                {"label":"K14 (F4,C7)", "x":4.25, "y":1},
+                {"label":"K15 (F4,C6)", "x":5.25, "y":1},
+                {"label":"K16 (F4,B6)", "x":6.25, "y":1},
+                {"label":"K17 (F4,B5)", "x":7.25, "y":1},
+                {"label":"K18 (F4,B4)", "x":8.25, "y":1},
+                {"label":"K19 (F4,D7)", "x":9.25, "y":1},
+                {"label":"K1B (F4,D4)", "x":10.25, "y":1, "w":1.75},
+                {"label":"K20 (F1,B0)", "x":0, "y":2, "w":2},
+                {"label":"K21 (F1,F5)", "x":2, "y":2},
+                {"label":"K22 (F1,F6)", "x":3, "y":2},
+                {"label":"K23 (F1,F7)", "x":4, "y":2},
+                {"label":"K24 (F1,C7)", "x":5, "y":2},
+                {"label":"K25 (F1,C6)", "x":6, "y":2},
+                {"label":"K26 (F1,B6)", "x":7, "y":2},
+                {"label":"K27 (F1,B5)", "x":8, "y":2},
+                {"label":"K28 (F1,B4)", "x":9, "y":2},
+                {"label":"K29 (F1,D7)", "x":10, "y":2},
+                {"label":"K2B (F1,D4)", "x":11, "y":2},
+                {"label":"K30 (F0,B0)", "x":0, "y":3},
+                {"label":"K31 (F0,F5)", "x":1, "y":3},
+                {"label":"K32 (F0,F6)", "x":2, "y":3},
+                {"label":"K33 (F0,F7)", "x":3, "y":3, "w":2.75},
+                {"label":"K35 (F0,C6)", "x":5.75, "y":3, "w":2.25},
+                {"label":"K37 (F0,B5)", "x":8, "y":3},
+                {"label":"K38 (F0,B4)", "x":9, "y":3},
+                {"label":"K39 (F0,D7)", "x":10, "y":3},
+                {"label":"K3B (F0,D4)", "x":11, "y":3}
+            ]
+        }
+    }
+    ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
+}

keyboards/bm43a/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/bm43a/keymaps/default/keymap.c

@@ -0,0 +1,33 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+        KC_TAB,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_ENT,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_UP,   KC_DOT,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,                 KC_SPC,              MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT(
+        RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,   BL_TOGG, BL_DEC,  BL_INC,  BL_STEP, _______, _______, _______, _______, _______, _______,
+        _______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______,
+        _______, _______, _______, _______,                _______,             _______, _______, _______, _______
+    ),
+
+};
+

keyboards/bm43a/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for bm43a

keyboards/bm43a/readme.md

@@ -0,0 +1,16 @@
+# bm43a
+
+A 40% mechanical keyboard.  
+
+This firmware was originally taken from a kbfirmware.json and converted through [kbf_qmk_converter](https://noroadsleft.github.io/kbf_qmk_converter/). You may find the original `.json` files [here](https://drive.google.com/drive/folders/11DowBYrFN_uCNa9Q9bXwuMn91vmZYBcG).  
+
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: bm43a PCB    
+Hardware Availability: [KPRepublic](https://kprepublic.com/products/bm43a-bm43-43-keys-40-custom-mechanical-keyboard-pcb-programmed-numpad-layouts-qmk-firmware-with-rgb-bottom-underglow-alps-mx)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bm43a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bm43a/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/cannonkeys/satisfaction75/prototype/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Satisfaction75 prototype", 
+    "url": "", 
+    "maintainer": "Cannon Keys", 
+    "width": 16.5, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_default": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25, "w":2}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25, "w":2.25}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":2.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.25}, {"x":1.25, "y":5.25, "w":1.25}, {"x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"x":10, "y":5.25}, {"x":11, "y":5.25}, {"x":12, "y":5.25}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        }
+    }
+}

keyboards/cannonkeys/satisfaction75/rev1/info.json

@@ -0,0 +1,32 @@
+{
+    "keyboard_name": "Satisfaction75 rev1", 
+    "url": "", 
+    "maintainer": "Cannon Keys", 
+    "width": 16.5, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_default": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25, "w":2}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25, "w":2.25}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":2.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.25}, {"x":1.25, "y":5.25, "w":1.25}, {"x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"x":10, "y":5.25}, {"x":11, "y":5.25}, {"x":12, "y":5.25}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        },
+
+        "LAYOUT_iso": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25, "w":2}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25}, {"x":13.75, "y":2.25, "w":1.25, "h":2}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.25}, {"x":1.25, "y":5.25, "w":1.25}, {"x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"x":10, "y":5.25}, {"x":11, "y":5.25}, {"x":12, "y":5.25}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        },
+
+        "LAYOUT_3x2": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25, "w":2}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25, "w":2.25}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":2.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.25}, {"x":1.25, "y":5.25, "w":1.25}, {"x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"x":10, "y":5.25, "w":1.5}, {"x":11.5, "y":5.25, "w":1.5}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        },
+
+        "LAYOUT_2x2": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25, "w":2.25}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":2.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.5}, {"x":1.5, "y":5.25, "w":1.5}, {"x":3, "y":5.25, "w":7}, {"x":10, "y":5.25, "w":1.5}, {"x":11.5, "y":5.25, "w":1.5}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        },
+
+        "LAYOUT_split_space": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25, "w":2}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25, "w":2.25}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":2.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.25}, {"x":1.25, "y":5.25, "w":1.25}, {"x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":2.25}, {"x":6, "y":5.25, "w":1.25}, {"x":7.25, "y":5.25, "w":2.75}, {"x":10, "y":5.25}, {"x":11, "y":5.25}, {"x":12, "y":5.25}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        },
+
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.75, "y":0}, {"x":6.75, "y":0}, {"x":7.75, "y":0}, {"x":8.75, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"x":15.5, "y":1}, {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.5, "y":2.25}, {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25}, {"x":13.75, "y":3.25, "w":1.25}, {"x":15.5, "y":3.25}, {"x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14.25, "y":4.5}, {"x":15.5, "y":4.25}, {"x":0, "y":5.25, "w":1.25}, {"x":1.25, "y":5.25, "w":1.25}, {"x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":2.25}, {"x":6, "y":5.25, "w":1.25}, {"x":7.25, "y":5.25, "w":2.75}, {"x":10, "y":5.25}, {"x":11, "y":5.25}, {"x":12, "y":5.25}, {"x":13.25, "y":5.5}, {"x":14.25, "y":5.5}, {"x":15.25, "y":5.5}]
+        }
+    }
+}

keyboards/cannonkeys/satisfaction75/rev1/rev1.h

@@ -24,7 +24,7 @@
 #define LAYOUT_iso( \
 	K000,       K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013,             \
 	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K115, \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,       K215, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             K215, \
 	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       K315, \
 	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413,       K415, \
 	K500, K501, K502,             K505,                   K509, K510, K511, K512, K513,       K515  \

keyboards/clueboard/card/rules.mk

@@ -11,7 +11,6 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
 # Build Options
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes      # Mouse keys(+4700)

keyboards/crkbd/keymaps/soundmonster/README.md

@@ -0,0 +1,13 @@
+# Soundmonster's layout for Corne
+
+Features:
+
+* Modern OLED support (many thanks to @drashna):
+  * Proper orientation
+  * Graphic layer indicator ↑ ↓
+  * Graphic modifier indicator ⌘ ⇧ ⌥  ⌃
+* Similar enough to the default keymap so you can easily port your custom keymap to it
+* Mac-friendly (Command and Option on the thumbs)
+* Vim-friendly (Esc, `:` and Ctrl on the thumbs)
+* Full per-key RGB Matrix support out of the box (you still have to go through the nightmare of soldering yourself though 😉)
+

keyboards/crkbd/keymaps/soundmonster/config.h

@@ -0,0 +1,110 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <[email protected]>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+// #define SSD1306OLED
+#undef USE_I2C
+#undef SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+// #define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 150
+#define RETRO_TAPPING
+#define IGNORE_MOD_TAP_INTERRUPT
+
+#ifdef RGBLIGHT_ENABLE
+    #undef RGBLED_NUM
+    #define RGBLED_NUM 27
+    #define RGBLIGHT_ANIMATIONS
+    #define RGBLIGHT_SLEEP
+    #define RGBLIGHT_SPLIT
+    #define RGBLIGHT_LIMIT_VAL 120
+    #define RGBLIGHT_HUE_STEP 10
+    #define RGBLIGHT_SAT_STEP 17
+    #define RGBLIGHT_VAL_STEP 17
+#endif
+
+#define OLED_FONT_H "keyboards/crkbd/keymaps/soundmonster/glcdfont.c"
+// #define OLED_FONT_WIDTH 5
+// #define OLED_FONT_HEIGHT 7
+
+#ifdef RGB_MATRIX_ENABLE
+#   define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+// #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
+// #   define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#   define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
+#   define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#   define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+#   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
+#   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. 
+#   define RGB_MATRIX_HUE_STEP 8
+#   define RGB_MATRIX_SAT_STEP 8
+#   define RGB_MATRIX_VAL_STEP 8
+#   define RGB_MATRIX_SPD_STEP 10
+
+/* Disable the animations you don't want/need.  You will need to disable a good number of these    *
+ * because they take up a lot of space.  Disable until you can successfully compile your firmware. */
+// #   define DISABLE_RGB_MATRIX_ALPHAS_MODS
+#   define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#   define DISABLE_RGB_MATRIX_BREATHING
+// #   define DISABLE_RGB_MATRIX_BAND_SAT
+#   define DISABLE_RGB_MATRIX_BAND_VAL
+#   define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#   define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#   define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#   define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#   define DISABLE_RGB_MATRIX_CYCLE_ALL
+#   define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#   define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#   define DISABLE_RGB_MATRIX_CYCLE_OUT_IN
+#   define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+// #   define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#   define DISABLE_RGB_MATRIX_DUAL_BEACON
+#   define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#   define DISABLE_RGB_MATRIX_CYCLE_SPIRAL
+#   define DISABLE_RGB_MATRIX_RAINBOW_BEACON
+#   define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+// #   define DISABLE_RGB_MATRIX_RAINDROPS
+#   define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+// #   define DISABLE_RGB_MATRIX_TYPING_HEATMAP
+// #   define DISABLE_RGB_MATRIX_DIGITAL_RAIN
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+// #   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#   define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#   define DISABLE_RGB_MATRIX_SPLASH
+// #   define DISABLE_RGB_MATRIX_MULTISPLASH
+#   define DISABLE_RGB_MATRIX_SOLID_SPLASH
+#   define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#endif

keyboards/crkbd/keymaps/soundmonster/glcdfont.c

@@ -0,0 +1,241 @@
+#pragma once
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#elif defined(ESP8266)
+ #include <pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+// Corne 8x6 font with QMK Firmware Logo
+// Online editor: https://helixfonteditor.netlify.com/
+// See also: https://github.com/soundmonster/glcdfont_converter
+
+const unsigned char font[] PROGMEM = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
+0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
+0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
+0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xC0, 0xE0, 0xF0, 0xF8,
+0xF8, 0x18, 0x00, 0xC0, 0xF0, 0xFC,
+0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0x7E, 0x00, 0x00, 0x00,
+0x00, 0xF8, 0x04, 0x22, 0x52, 0xE2,
+0x42, 0x42, 0x42, 0xE2, 0x52, 0x22,
+0x22, 0x22, 0x42, 0x82, 0x02, 0x02,
+0x22, 0x22, 0x02, 0x04, 0xF8, 0x00,
+0x00, 0xF8, 0x04, 0x02, 0x02, 0x82,
+0x42, 0x22, 0x42, 0x82, 0x02, 0x02,
+0x02, 0x82, 0x42, 0x22, 0x12, 0x22,
+0x42, 0x82, 0x02, 0x04, 0xF8, 0x00,
+0x00, 0xF8, 0xFC, 0xDE, 0xAE, 0x1E,
+0xBE, 0xBE, 0xBE, 0x1E, 0xAE, 0xDE,
+0xDE, 0xDE, 0xBE, 0x7E, 0xFE, 0xFE,
+0xDE, 0xDE, 0xFE, 0xFC, 0xF8, 0x00,
+0x00, 0xF8, 0xFC, 0xFE, 0xFE, 0x7E,
+0xBE, 0xDE, 0xBE, 0x7E, 0xFE, 0xFE,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x80, 0x80, 0x40, 0x40, 0x20, 0x20,
+0x10, 0x10, 0x08, 0x08, 0x10, 0x10,
+0x20, 0x20, 0x40, 0x40, 0x80, 0x80,
+0x80, 0x80, 0xC0, 0xC0, 0xE0, 0xE0,
+0xF0, 0xF0, 0xF8, 0xF8, 0xF0, 0xF0,
+0xE0, 0xE0, 0xC0, 0xC0, 0x80, 0x80,
+0x80, 0x80, 0x40, 0x40, 0x20, 0x20,
+0x10, 0x10, 0x08, 0x08, 0x10, 0x10,
+0x20, 0x20, 0x40, 0x40, 0x80, 0x80,
+0x80, 0x80, 0x40, 0xC0, 0x60, 0xA0,
+0x50, 0xB0, 0x58, 0xA8, 0x50, 0xB0,
+0x60, 0xA0, 0x40, 0xC0, 0x80, 0x80,
+0x00, 0xF8, 0xFC, 0xFE, 0xFF, 0xE0,
+0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0x80, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F,
+0x07, 0x01, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x1F, 0x20, 0x44, 0x4A, 0x47,
+0x42, 0x42, 0x42, 0x47, 0x4A, 0x44,
+0x40, 0x40, 0x40, 0x40, 0x41, 0x42,
+0x44, 0x44, 0x40, 0x20, 0x1F, 0x00,
+0x00, 0x1F, 0x20, 0x40, 0x41, 0x40,
+0x40, 0x40, 0x40, 0x40, 0x41, 0x40,
+0x41, 0x41, 0x4F, 0x48, 0x48, 0x48,
+0x4F, 0x41, 0x41, 0x20, 0x1F, 0x00,
+0x00, 0x1F, 0x3F, 0x7B, 0x75, 0x78,
+0x7D, 0x7D, 0x7D, 0x78, 0x75, 0x7B,
+0x7F, 0x7F, 0x7F, 0x7F, 0x7E, 0x7D,
+0x7B, 0x7B, 0x7F, 0x3F, 0x1F, 0x00,
+0x00, 0x1F, 0x3F, 0x7F, 0x7E, 0x7F,
+0x7F, 0x7F, 0x7F, 0x7F, 0x7E, 0x7F,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x88, 0x88, 0x5D, 0x5D, 0x3E, 0x3E,
+0x7C, 0x7C, 0xF8, 0xF8, 0x7C, 0x7C,
+0x3E, 0x3E, 0x5D, 0x5D, 0x88, 0x88,
+0x88, 0x88, 0x55, 0x55, 0x23, 0x23,
+0x47, 0x47, 0x8F, 0x8F, 0x47, 0x47,
+0x23, 0x23, 0x55, 0x55, 0x88, 0x88,
+0x88, 0x88, 0xD5, 0xD5, 0xE2, 0xE2,
+0xC4, 0xC4, 0x88, 0x88, 0xC4, 0xC4,
+0xE2, 0xE2, 0xD5, 0xD5, 0x88, 0x88,
+0x88, 0x88, 0x5D, 0xD5, 0x6B, 0xB6,
+0x6D, 0xD6, 0xAD, 0xDA, 0x6D, 0xD6,
+0x6B, 0xB6, 0x5D, 0xD5, 0x88, 0x88,
+0x00, 0x03, 0x0F, 0x1F, 0x3F, 0x3F,
+0x3F, 0x3F, 0x1F, 0x1F, 0x3F, 0x3F,
+0x7F, 0x7F, 0x7F, 0x3F, 0x3F, 0x1F,
+0x3F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7C,
+0x78, 0x78, 0x38, 0x1C, 0x0F, 0x00,
+0x04, 0xF8, 0x00, 0x00, 0xF8, 0x04,
+0x20, 0x1F, 0x00, 0x00, 0x1F, 0x20,
+0xFC, 0xF8, 0x00, 0x00, 0xF8, 0x04,
+0x3F, 0x1F, 0x00, 0x00, 0x1F, 0x20,
+0x04, 0xF8, 0x00, 0x00, 0xF8, 0xFC,
+0x20, 0x1F, 0x00, 0x00, 0x1F, 0x3F,
+0xFC, 0xF8, 0x00, 0x00, 0xF8, 0xFC,
+0x3F, 0x1F, 0x00, 0x00, 0x1F, 0x3F,
+0xFE, 0x7E, 0xBE, 0xDE, 0xEE, 0xDE,
+0xBE, 0x7E, 0xFE, 0xFC, 0xF8, 0x00,
+0x7E, 0x7E, 0x70, 0x77, 0x77, 0x77,
+0x70, 0x7E, 0x7E, 0x3F, 0x1F, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x02, 0x02,
+0x04, 0x04, 0x08, 0x08, 0x04, 0x04,
+0x02, 0x02, 0x01, 0x01, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x02, 0x02,
+0x04, 0x04, 0x08, 0x08, 0x04, 0x04,
+0x02, 0x02, 0x01, 0x01, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x03, 0x03,
+0x07, 0x07, 0x0F, 0x0F, 0x07, 0x07,
+0x03, 0x03, 0x01, 0x01, 0x00, 0x00,
+0x00, 0x00, 0x01, 0x01, 0x03, 0x02,
+0x05, 0x06, 0x0D, 0x0A, 0x05, 0x06,
+0x03, 0x02, 0x01, 0x01, 0x00, 0x00
+};

keyboards/crkbd/keymaps/soundmonster/keymap.c

@@ -0,0 +1,393 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+#ifdef OLED_DRIVER_ENABLE
+static uint32_t oled_timer = 0;
+#endif
+
+extern uint8_t is_master;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+// Custom keycodes for layer keys
+// Dual function escape with left command
+#define KC_LGESC LGUI_T(KC_ESC)
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+  RGBRST,
+  KC_RACL // right alt / colon
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT(
+  //,-----------------------------------------.                ,---------------------------------------------.
+     KC_TAB,  KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,                   KC_Y,  KC_U,  KC_I,  KC_O,  KC_P,  KC_BSPC,
+  //|------+------+------+------+------+------|                |------+------+-------+------+-------+--------|
+    KC_LCTL,  KC_A,  KC_S,  KC_D,  KC_F,  KC_G,                   KC_H,  KC_J,  KC_K,  KC_L, KC_SCLN,KC_QUOT,
+  //|------+------+------+------+------+------|                |------+------+-------+------+-------+--------|
+    KC_LSPO,  KC_Z,  KC_X,  KC_C,  KC_V,  KC_B,                   KC_N,  KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSPC,
+  //|------+------+------+------+------+------+------|  |------+------+------+-------+------+-------+--------|
+                               KC_LGESC,LOWER, KC_SPC,   RCTL_T(KC_ENT), RAISE, KC_RACL
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_LOWER] = LAYOUT(
+  //,---------------------------------------------.                ,-----------------------------------------.
+     KC_ESC,  KC_1, KC_2,   KC_3,   KC_4,   KC_5,                    KC_6,  KC_7,  KC_8,  KC_9,  KC_0, KC_DEL,
+  //|------+------+-------+-------+-------+-------|                |------+------+------+------+------+------|
+    KC_LCTL, KC_NO,KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,                KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,KC_NO,KC_NO,
+  //|------+------+-------+-------+-------+-------|                |------+------+------+------+------+------|
+    KC_LSFT, KC_NO,KC_BTN2,KC_WH_D,KC_WH_U,KC_BTN1,                KC_HOME,KC_PGDN,KC_PGUP,KC_END,KC_NO,KC_NO,
+  //|------+------+-------+-------+-------+-------+------|  |------+------+------+------+------+------+------|
+                                    KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT
+                                  //`--------------------'  `--------------------'
+  ),
+
+  [_RAISE] = LAYOUT(
+  //,-----------------------------------------.                ,-----------------------------------------.
+     KC_ESC,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC,              KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_LCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,                KC_MINS,KC_EQL,KC_LCBR,KC_RCBR,KC_PIPE,KC_GRV,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    KC_LSFT, KC_F6, KC_F7, KC_F8, KC_F9,KC_F10,                KC_UNDS,KC_PLUS,KC_LBRC,KC_RBRC,KC_BSLS,KC_TILD,
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_ADJUST] = LAYOUT(
+  //,-----------------------------------------.                ,-----------------------------------------.
+      RESET,RGBRST, KC_NO, KC_NO, KC_NO, KC_NO,                  KC_NO,KC__MUTE, KC_NO, KC_NO, KC_NO, KC_NO,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    RGB_TOG,RGB_HUI,RGB_SAI,RGB_VAI,RGB_SPI,KC_NO,               KC_PAUSE,KC__VOLUP, KC_NO, KC_NO, KC_NO, KC_NO,
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+    RGB_MOD,RGB_HUD,RGB_SAD,RGB_VAD,RGB_SPD,KC_NO,               KC_SCROLLLOCK,KC__VOLDOWN, KC_NO, KC_NO, KC_NO, RGB_RMOD,
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                KC_LGUI, LOWER,KC_SPC,   KC_ENT, RAISE,KC_RALT
+                              //`--------------------'  `--------------------'
+  )
+};
+
+int RGB_current_mode;
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+void matrix_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+}
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; }
+
+void render_space(void) {
+    oled_write_P(PSTR("     "), false);
+}
+
+void render_mod_status_gui_alt(uint8_t modifiers) {
+    static const char PROGMEM gui_off_1[] = {0x85, 0x86, 0};
+    static const char PROGMEM gui_off_2[] = {0xa5, 0xa6, 0};
+    static const char PROGMEM gui_on_1[] = {0x8d, 0x8e, 0};
+    static const char PROGMEM gui_on_2[] = {0xad, 0xae, 0};
+
+    static const char PROGMEM alt_off_1[] = {0x87, 0x88, 0};
+    static const char PROGMEM alt_off_2[] = {0xa7, 0xa8, 0};
+    static const char PROGMEM alt_on_1[] = {0x8f, 0x90, 0};
+    static const char PROGMEM alt_on_2[] = {0xaf, 0xb0, 0};
+
+    // fillers between the modifier icons bleed into the icon frames
+    static const char PROGMEM off_off_1[] = {0xc5, 0};
+    static const char PROGMEM off_off_2[] = {0xc6, 0};
+    static const char PROGMEM on_off_1[] = {0xc7, 0};
+    static const char PROGMEM on_off_2[] = {0xc8, 0};
+    static const char PROGMEM off_on_1[] = {0xc9, 0};
+    static const char PROGMEM off_on_2[] = {0xca, 0};
+    static const char PROGMEM on_on_1[] = {0xcb, 0};
+    static const char PROGMEM on_on_2[] = {0xcc, 0};
+
+    if(modifiers & MOD_MASK_GUI) {
+        oled_write_P(gui_on_1, false);
+    } else {
+        oled_write_P(gui_off_1, false);
+    }
+
+    if ((modifiers & MOD_MASK_GUI) && (modifiers & MOD_MASK_ALT)) {
+        oled_write_P(on_on_1, false);
+    } else if(modifiers & MOD_MASK_GUI) {
+        oled_write_P(on_off_1, false);
+    } else if(modifiers & MOD_MASK_ALT) {
+        oled_write_P(off_on_1, false);
+    } else {
+        oled_write_P(off_off_1, false);
+    }
+
+    if(modifiers & MOD_MASK_ALT) {
+        oled_write_P(alt_on_1, false);
+    } else {
+        oled_write_P(alt_off_1, false);
+    }
+
+    if(modifiers & MOD_MASK_GUI) {
+        oled_write_P(gui_on_2, false);
+    } else {
+        oled_write_P(gui_off_2, false);
+    }
+
+    if (modifiers & MOD_MASK_GUI & MOD_MASK_ALT) {
+        oled_write_P(on_on_2, false);
+    } else if(modifiers & MOD_MASK_GUI) {
+        oled_write_P(on_off_2, false);
+    } else if(modifiers & MOD_MASK_ALT) {
+        oled_write_P(off_on_2, false);
+    } else {
+        oled_write_P(off_off_2, false);
+    }
+
+    if(modifiers & MOD_MASK_ALT) {
+        oled_write_P(alt_on_2, false);
+    } else {
+        oled_write_P(alt_off_2, false);
+    }
+}
+
+void render_mod_status_ctrl_shift(uint8_t modifiers) {
+    static const char PROGMEM ctrl_off_1[] = {0x89, 0x8a, 0};
+    static const char PROGMEM ctrl_off_2[] = {0xa9, 0xaa, 0};
+    static const char PROGMEM ctrl_on_1[] = {0x91, 0x92, 0};
+    static const char PROGMEM ctrl_on_2[] = {0xb1, 0xb2, 0};
+
+    static const char PROGMEM shift_off_1[] = {0x8b, 0x8c, 0};
+    static const char PROGMEM shift_off_2[] = {0xab, 0xac, 0};
+    static const char PROGMEM shift_on_1[] = {0xcd, 0xce, 0};
+    static const char PROGMEM shift_on_2[] = {0xcf, 0xd0, 0};
+
+    // fillers between the modifier icons bleed into the icon frames
+    static const char PROGMEM off_off_1[] = {0xc5, 0};
+    static const char PROGMEM off_off_2[] = {0xc6, 0};
+    static const char PROGMEM on_off_1[] = {0xc7, 0};
+    static const char PROGMEM on_off_2[] = {0xc8, 0};
+    static const char PROGMEM off_on_1[] = {0xc9, 0};
+    static const char PROGMEM off_on_2[] = {0xca, 0};
+    static const char PROGMEM on_on_1[] = {0xcb, 0};
+    static const char PROGMEM on_on_2[] = {0xcc, 0};
+
+    if(modifiers & MOD_MASK_CTRL) {
+        oled_write_P(ctrl_on_1, false);
+    } else {
+        oled_write_P(ctrl_off_1, false);
+    }
+
+    if ((modifiers & MOD_MASK_CTRL) && (modifiers & MOD_MASK_SHIFT)) {
+        oled_write_P(on_on_1, false);
+    } else if(modifiers & MOD_MASK_CTRL) {
+        oled_write_P(on_off_1, false);
+    } else if(modifiers & MOD_MASK_SHIFT) {
+        oled_write_P(off_on_1, false);
+    } else {
+        oled_write_P(off_off_1, false);
+    }
+
+    if(modifiers & MOD_MASK_SHIFT) {
+        oled_write_P(shift_on_1, false);
+    } else {
+        oled_write_P(shift_off_1, false);
+    }
+
+    if(modifiers & MOD_MASK_CTRL) {
+        oled_write_P(ctrl_on_2, false);
+    } else {
+        oled_write_P(ctrl_off_2, false);
+    }
+
+    if (modifiers & MOD_MASK_CTRL & MOD_MASK_SHIFT) {
+        oled_write_P(on_on_2, false);
+    } else if(modifiers & MOD_MASK_CTRL) {
+        oled_write_P(on_off_2, false);
+    } else if(modifiers & MOD_MASK_SHIFT) {
+        oled_write_P(off_on_2, false);
+    } else {
+        oled_write_P(off_off_2, false);
+    }
+
+    if(modifiers & MOD_MASK_SHIFT) {
+        oled_write_P(shift_on_2, false);
+    } else {
+        oled_write_P(shift_off_2, false);
+    }
+}
+
+void render_logo(void) {
+    static const char PROGMEM corne_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0};
+    oled_write_P(corne_logo, false);
+    oled_write_P(PSTR("corne"), false);
+}
+
+void render_layer_state(void) {
+    static const char PROGMEM default_layer[] = {
+        0x20, 0x94, 0x95, 0x96, 0x20,
+        0x20, 0xb4, 0xb5, 0xb6, 0x20,
+        0x20, 0xd4, 0xd5, 0xd6, 0x20, 0};
+    static const char PROGMEM raise_layer[] = {
+        0x20, 0x97, 0x98, 0x99, 0x20,
+        0x20, 0xb7, 0xb8, 0xb9, 0x20,
+        0x20, 0xd7, 0xd8, 0xd9, 0x20, 0};
+    static const char PROGMEM lower_layer[] = {
+        0x20, 0x9a, 0x9b, 0x9c, 0x20,
+        0x20, 0xba, 0xbb, 0xbc, 0x20,
+        0x20, 0xda, 0xdb, 0xdc, 0x20, 0};
+    static const char PROGMEM adjust_layer[] = {
+        0x20, 0x9d, 0x9e, 0x9f, 0x20,
+        0x20, 0xbd, 0xbe, 0xbf, 0x20,
+        0x20, 0xdd, 0xde, 0xdf, 0x20, 0};
+    if(layer_state_is(_ADJUST)) {
+        oled_write_P(adjust_layer, false);
+    } else if(layer_state_is(_LOWER)) {
+        oled_write_P(lower_layer, false);
+    } else if(layer_state_is(_RAISE)) {
+        oled_write_P(raise_layer, false);
+    } else {
+        oled_write_P(default_layer, false);
+    }
+}
+
+void render_status_main(void) {
+    render_logo();
+    render_space();
+    render_layer_state();
+    render_space();
+    render_mod_status_gui_alt(get_mods()|get_oneshot_mods());
+    render_mod_status_ctrl_shift(get_mods()|get_oneshot_mods());
+}
+
+void render_status_secondary(void) {
+    render_logo();
+    render_space();
+    render_layer_state();
+    render_space();
+    render_mod_status_gui_alt(get_mods()|get_oneshot_mods());
+    render_mod_status_ctrl_shift(get_mods()|get_oneshot_mods());
+}
+
+void oled_task_user(void) {
+    if (timer_elapsed32(oled_timer) > 30000) {
+        oled_off();
+        return;
+    }
+#ifndef SPLIT_KEYBOARD
+    else { oled_on(); }
+#endif
+
+    if (is_master) {
+        render_status_main();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_status_secondary();
+    }
+}
+
+#endif
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+#ifdef OLED_DRIVER_ENABLE
+        oled_timer = timer_read32();
+#endif
+    // set_timelog();
+  }
+  static uint16_t my_colon_timer;
+
+  switch (keycode) {
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case ADJUST:
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+    case KC_RACL:
+        if (record->event.pressed) {
+          my_colon_timer = timer_read();
+          register_code(KC_RALT);
+        } else {
+          unregister_code(KC_RALT);
+          if (timer_elapsed(my_colon_timer) < TAPPING_TERM) {
+            SEND_STRING(":"); // Change the character(s) to be sent on tap here
+          }
+        }
+        return false;
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      #ifdef RGB_MATRIX_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgb_matrix_default();
+          rgb_matrix_enable();
+        }
+      #endif
+      break;
+  }
+  return true;
+}
+
+#ifdef RGB_MATRIX_ENABLE
+
+void suspend_power_down_keymap(void) {
+    rgb_matrix_set_suspend_state(true);
+}
+
+void suspend_wakeup_init_keymap(void) {
+    rgb_matrix_set_suspend_state(false);
+}
+
+#endif

keyboards/crkbd/keymaps/soundmonster/rules.mk

@@ -0,0 +1,6 @@
+RGBLIGHT_ENABLE    = no
+RGB_MATRIX_ENABLE  = WS2812
+MOUSEKEY_ENABLE    = no
+NKRO_ENABLE        = yes
+OLED_DRIVER_ENABLE = yes
+

keyboards/duck/orion/v3/rules.mk

@@ -11,7 +11,6 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
 # Build Options
 #   change yes to no to disable
 #
@@ -36,4 +35,4 @@ CUSTOM_MATRIX = yes
 SRC += indicator_leds.c \
 			 matrix.c duck_led/duck_led.c
 
-LAYOUTS = tkl_ansi
+LAYOUTS = tkl_ansi

keyboards/dz60/dz60.h

@@ -548,4 +548,57 @@
     { k40,  k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, k4a, KC_NO,  k4c, k4d,   k4e   }  \
 }
 
+/* LAYOUT_60_iso_5x1u_split_bs_rshift_spc
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d  │
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤
+ * │30  |31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
+ * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬┴──┬───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
+#define LAYOUT_60_iso_5x1u_split_bs_rshift_spc( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
+    { k30,  k31,   k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  k3b,   KC_NO,k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
+}
+
+/* LAYOUT_60_olivierko
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬───────┤
+ * │30     │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d     │
+ * ├─────┬─┴─┬─┴───┼───┴───┴───┴───┴───┴───┴───┼───┼───┼───┬───┤
+ * │40   │41 │43   │46 (7u)                    │4b │4c │4d │4e │
+ * └─────┴───┴─────┴───────────────────────────┴───┴───┴───┴───┘
+*/
+#define LAYOUT_olivierko( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+	k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d,      \
+	k40, k41,      k43,           k46,                     k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,   k05,   k06,  k07,   k08,   k09,   k0a,   k0b,  k0c,   k0d,   k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,   k15,   k16,  k17,   k18,   k19,   k1a,   k1b,  k1c,   k1d,   k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,   k25,   k26,  k27,   k28,   k29,   k2a,   k2b,  k2c,   k2d,   KC_NO }, \
+    { k30,  KC_NO, k32,   k33,  k34,   k35,   k36,  k37,   k38,   k39,   k3a,   k3b,  k3c,   k3d,   KC_NO }, \
+	{ k40,  k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, KC_NO, k4b,  k4c,   k4d,   k4e   }  \
+}
 #endif

keyboards/dz60/info.json

@@ -80,6 +80,14 @@
     "LAYOUT_60_2_function": {
         "key_count": 63,
         "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.5}, {"label":"Control", "x":11.5, "y":4, "w":1.5}, {"label":"GUI", "x":13, "y":4}, {"label":"Fn2", "x":14, "y":4}]
-      }
+	},
+    "LAYOUT_60_iso_5x1u_split_bs_rshift_spc": {
+      "key_count": 67,
+      "layout": [{"label":"Esc/¬", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Del", "x":13, "y":0, "w":1}, {"label":"Backspace", "x":14, "y":0, "w":1}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"VolUp", "x":14, "y":3, "w":1}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6.00, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"label":"Left", "x":10, "y":4, "w":1}, {"label":"Down", "x":11, "y":4, "w":1}, {"label":"Up", "x":12, "y":4, "w":1}, {"label":"Right", "x":13, "y":4, "w":1}, {"label":"VolDown", "x":14, "y":4, "w":1}]
+    },
+    "LAYOUT_olivierko": {
+      "key_count": 63,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Fn", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"label":"↑", "x":12, "y":3}, {"label":"Shift", "x":13, "y":3, "w":2}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"←", "x":11, "y":4}, {"label":"↓", "x":12, "y":4}, {"label":"→", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
+    }
   }
 }

keyboards/dz60/keymaps/iso_vim_arrow_split_rs/README.md

@@ -0,0 +1,3 @@
+# ISO layout with VIM style arrow cluster
+
+Vim arrow keys with split right shift and backspace (currently not utilised in this layout but I thought I would add it to make it easier for people to add it for their layouts).

keyboards/dz60/keymaps/iso_vim_arrow_split_rs/keymap.c

@@ -0,0 +1,49 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* 
+   * ,-----------------------------------------------------------.
+   * |Esc|1 !|2 "|3 £|4 $|5 %|6 ^|7 &|8 *|9 (|0 )|- _|= +|bck|bck|
+   * |-----------------------------------------------------------|
+   * | Tab | Q | W | E | R | T | Y | U | I | O | P |[ {|] }|Enter|
+   * |------------------------------------------------------.    |
+   * | Fn1  | A | S | D | F | G | H | J | K | L |; :|' @|# ~|    |
+   * |-----------------------------------------------------------|
+   * |Sft |\ || Z | X | C | V | B | N | M |, <|. >|/ ?| Caps |vU |
+   * |-----------------------------------------------------------|
+   * |Ctrl |GUI|Alt  |         Space         |Lft|Dwn|Up |Rht|vD |
+   * `-----------------------------------------------------------'
+   */
+  LAYOUT_60_iso_5x1u_split_bs_rshift_spc(
+//QWERTY Base layer:
+//  1        2        3        4        5        6        7        8        9        10       11       12       13       14       15
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
+    MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_CAPS, KC_VOLU,
+    KC_LCTL, KC_LGUI, KC_LALT, KC_NO,            KC_SPC,                    KC_NO,   KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT,KC_VOLD
+  ),
+
+
+  LAYOUT_60_iso_5x1u_split_bs_rshift_spc(
+//F key layer:
+//  1        2        3        4        5        6        7        8        9        10       11       12       13       14       15
+    KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2),   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,            KC_TRNS,                   KC_NO,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+  LAYOUT_60_iso_5x1u_split_bs_rshift_spc(
+//Reset by holding Fn1 and Fn2 and press the D key
+//  1        2        3        4        5        6        7        8        9        10       11       12       13       14       15
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2),   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_NO,            KC_TRNS,                   KC_NO,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  ),
+
+};

keyboards/dz60/keymaps/iso_vim_arrow_split_rs/rules.mk

@@ -0,0 +1,7 @@
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no

keyboards/dz60/keymaps/olivierko/keymap.c

@@ -0,0 +1,87 @@
+#include QMK_KEYBOARD_H
+
+enum keyboard_layers {
+  _BL,
+  _SL,
+  _FL,
+  _CL,
+};
+
+enum custom_keycodes {
+  SWE_AA = SAFE_RANGE,
+  SWE_AE,
+  SWE_OE,
+};
+
+char *alt_codes[][2] = {
+    {
+        SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_2)SS_TAP(X_KP_2)SS_TAP(X_KP_9)), // Alt+0229 → å
+        SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_1)SS_TAP(X_KP_9)SS_TAP(X_KP_7)), // Alt+0197 → Å
+    },
+    {
+		SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_2)SS_TAP(X_KP_2)SS_TAP(X_KP_8)), // Alt+0228 → ä
+        SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_1)SS_TAP(X_KP_9)SS_TAP(X_KP_6)), // Alt+0196 → Ä
+    },
+    {
+        SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_2)SS_TAP(X_KP_4)SS_TAP(X_KP_6)), // Alt+0246 → ö
+        SS_LALT(SS_TAP(X_KP_0)SS_TAP(X_KP_2)SS_TAP(X_KP_1)SS_TAP(X_KP_4)), // Alt+0214 → Ö
+    },
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BL] = LAYOUT_olivierko(
+		KC_ESC,	 	KC_1,	  	KC_2,	 	KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,	KC_EQL,		KC_BSLS,		KC_GRV,
+		KC_TAB,	 	KC_Q,	  	KC_W,	 	KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_LBRC,	KC_RBRC,	KC_BSPC,
+		MO(_FL),	KC_A,	  	KC_S,	 	KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,	KC_QUOT,	KC_ENT,		
+		KC_LSFT, 	KC_Z,	  	KC_X,	 	KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	KC_UP, 		KC_RSFT,	
+		KC_LCTL, 	KC_LGUI,  	KC_LALT, 										KC_SPC,											KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_RCTL),
+									
+	[_SL] = LAYOUT_olivierko(
+		KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,		KC_TRNS,
+		KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	SWE_AA,		KC_NO,		KC_TRNS,
+		KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	SWE_OE,		SWE_AE,		KC_TRNS,		
+		KC_TRNS, 	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS, 	KC_TRNS,	
+		KC_TRNS, 	KC_TRNS,  	KC_TRNS, 										KC_TRNS,										KC_TRNS,	KC_TRNS,	KC_TRNS,	KC_TRNS),									
+									
+	[_FL] = LAYOUT_olivierko(								
+		KC_ESC,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		KC_PSCR,		KC_PAUSE,
+		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_DELETE,
+		KC_NO,		DF(_BL),	DF(_SL),	KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_INS,	
+		KC_LSFT,	KC_NO,		KC_NO,		KC_CAPS,	KC_NO,		KC_NO,		KC_NO,		KC_MUTE,	KC_NO,		KC_NO,		KC_NO,		KC_PGUP,	KC_RSFT,	
+		KC_LCTL,	MO(_CL),	KC_LALT,										KC_MPLY,										KC_HOME,	KC_PGDOWN,	KC_END,		KC_RCTL),
+											
+	[_CL] = LAYOUT_olivierko(								
+		RGB_TOG,	RGB_MOD,	RGB_HUI,	RGB_HUD,	RGB_SAI,	RGB_SAD,	RGB_VAI,	RGB_VAD,	KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,			KC_NO,
+		KC_NO,		KC_NO,		KC_NO,		KC_NO,		RESET,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,
+		KC_NO,		KC_NO,		KC_NO,		DEBUG,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,	
+		KC_LSFT,	KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_NO,		KC_RSFT,	
+		KC_NO,		KC_NO,		KC_NO,											KC_NO,											KC_NO,		KC_NO,		KC_NO,		KC_NO),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record)
+{
+    if (!record->event.pressed) 
+		return true;
+
+    switch (keycode) {
+		case SWE_AA: 
+		case SWE_AE: 
+		case SWE_OE: {
+			uint16_t index = keycode - SWE_AA;
+			uint8_t shift = get_mods() & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT));
+
+			unregister_code(KC_LSFT);
+			unregister_code(KC_RSFT);
+
+			send_string(alt_codes[index][(bool)shift]);
+
+			if (shift & MOD_BIT(KC_LSFT)) register_code(KC_LSFT);
+			if (shift & MOD_BIT(KC_RSFT)) register_code(KC_RSFT);
+
+			return false;
+		}
+		default:
+			return true;
+    }
+}

keyboards/dz60/keymaps/olivierko/readme.md

@@ -0,0 +1,21 @@
+# DZ60
+### _BL:
+Base layer with american ANSI layout.  
+
+![_BL](https://i.imgur.com/BPMn7dk.png)
+### _SL:
+Swedish layer with ÅÄÖ at original positions.  
+
+![_SL](https://i.imgur.com/I8QRh24.png)
+### _FL:
+Function layer including various extra keys.  
+
+![_FL](https://i.imgur.com/nCbCIrZ.png)
+### _CL:
+Control layer for managing RGB and flashing.  
+
+![_CL](https://i.imgur.com/QnoMgsb.png)
+### Make command:
+```sh
+make dz60:olivierko:flash
+```

keyboards/ergodox_ez/config.h

@@ -40,6 +40,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MOUSEKEY_MAX_SPEED      7
 #define MOUSEKEY_WHEEL_DELAY 0
 
+#define DEBOUNCE 30
+
 #define TAPPING_TOGGLE  1
 
 /* define if matrix has ghost */

keyboards/ergodox_ez/matrix.c

@@ -31,6 +31,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "matrix.h"
 #include "debounce.h"
 #include QMK_KEYBOARD_H
+
+// Only enable this if console is enabled to print to
+#if defined(DEBUG_MATRIX_SCAN_RATE) && !defined(CONSOLE_ENABLE)
+#    undef DEBUG_MATRIX_SCAN_RATE
+#endif
+
 #ifdef DEBUG_MATRIX_SCAN_RATE
 #  include "timer.h"
 #endif
@@ -47,10 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  * that comment was written.)
  */
 
-#ifndef DEBOUNCE
-#  define DEBOUNCE 5
-#endif
-
 /* matrix state(1:on, 0:off) */
 static matrix_row_t raw_matrix[MATRIX_ROWS];  // raw values
 static matrix_row_t matrix[MATRIX_ROWS];      // debounced values

keyboards/ergodox_stm32/config.h

@@ -33,3 +33,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
     keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
 )
+
+// i2c_master driver config
+#define I2C1_CLOCK_SPEED 400000
+#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2

keyboards/exent/config.h

@@ -0,0 +1,53 @@
+/*
+Copyright 2019 mechmerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID 0x20A0
+#define PRODUCT_ID 0x422D
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Quadcube
+#define PRODUCT Exent
+#define DESCRIPTION 65% Keyboard
+
+#define RGBLED_NUM 18
+
+#define MATRIX_ROWS 7
+#define MATRIX_COLS 14
+
+//                         0   1   2   3   4   5   6   7   8   9   A   B   C   D
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6 }
+#define MATRIX_COL_PINS { D7, C2, C3, C4, C5, C6, C7, A7, A6, A5, A4, A3, A1, A0 }
+#define UNUSED_PINS 
+
+#define DIODE_DIRECTION COL2ROW
+#define DEBOUNCE 5
+
+#define BACKLIGHT_LEVELS 1
+#define RGBLIGHT_ANIMATIONS
+
+#define NO_UART 1
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/exent/exent.c

@@ -0,0 +1,90 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "exent.h"
+
+#ifdef RGBLIGHT_ENABLE
+
+#    include <string.h>
+#    include "i2c_master.h"
+#    include "rgblight.h"
+
+extern rgblight_config_t rgblight_config;
+
+void matrix_init_kb(void) {
+    i2c_init();
+    // call user level keymaps, if any
+    matrix_init_user();
+}
+
+// custom RGB driver
+void rgblight_set(void) {
+    if (!rgblight_config.enable) {
+        memset(led, 0, 3 * RGBLED_NUM);
+    }
+
+    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+}
+
+bool rgb_init = false;
+
+void matrix_scan_kb(void) {
+    // if LEDs were previously on before poweroff, turn them back on
+    if (rgb_init == false && rgblight_config.enable) {
+        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+        rgb_init = true;
+    }
+
+    rgblight_task();
+    matrix_scan_user();
+}
+
+#endif
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/exent/exent.h

@@ -0,0 +1,68 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define ___ KC_NO
+
+#define LAYOUT_all( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k6d, k53,  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k52,       \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k51,       \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k50,       \
+    k40, k41, k42, k44, k45, k46, k47, k48, k49, k4b, k4c, k4d                       \
+){ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d },  \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d },  \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d },  \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d },  \
+    { k40, k41, k42, ___, k44, k45, k46, k47, k48, k49, ___, k4b, k4c, k4d },  \
+    { k50, k51, k52, k53, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ },  \
+    { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k6d }   \
+}
+
+#define LAYOUT_65_ansi( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k53,  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k52,  \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k51,       \
+    k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k50,       \
+    k40, k41, k42, k45, k47, k48, k49, k4b, k4c, k4d                            \
+){ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d },  \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d },  \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, ___, k2d },  \
+    { k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d },  \
+    { k40, k41, k42, ___, ___, k45, ___, k47, k48, k49, ___, k4b, k4c, k4d },  \
+    { k50, k51, k52, k53, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ },  \
+    { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }   \
+}
+
+#define LAYOUT_65_iso( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k53,  \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,  k52,      \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k51,  \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k50,  \
+    k40, k41, k42, k45, k47, k48, k49, k4b, k4c, k4d                            \
+){ \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d },  \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, ___ },  \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d },  \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d },  \
+    { k40, k41, k42, ___, ___, k45, ___, k47, k48, k49, ___, k4b, k4c, k4d },  \
+    { k50, k51, k52, k53, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ },  \
+    { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }   \
+}

keyboards/exent/info.json

@@ -0,0 +1,20 @@
+{
+    "keyboard_name": "Exent", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":1.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+        }, 
+
+        "LAYOUT_65_ansi": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+        },
+
+        "LAYOUT_65_iso": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+        }
+    }
+}

keyboards/exent/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 mechmerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/exent/keymaps/default/keymap.c

@@ -0,0 +1,18 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* layer 0: qwerty */
+    [0] = LAYOUT_65_ansi(
+        KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
+        KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGDN,
+        KC_LSFT, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,          KC_UP,   KC_END,
+        KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                                  MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), 
+
+    [1] = LAYOUT_65_ansi(
+        KC_GRV,  KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_TRNS,
+        BL_TOGG, BL_STEP,  BL_INC,  BL_DEC,  RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        RGB_TOG, RGB_MOD,  RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS,  KC_TRNS,                KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), 
+    };

keyboards/exent/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for exent

keyboards/exent/readme.md

@@ -0,0 +1,19 @@
+# exent
+
+65% custom keyboard with large bezels. 
+
+Keyboard Maintainer: [mechmerlin](https://github.com/mechmerlin)  
+Hardware Supported: Exent PCB  
+Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=87213.0)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make exent:default
+
+Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](flashing_bootloadhid.md))
+
+    make exent:default:flash
+
+**Reset Key**: Hold down the key located at `k0d`, commonly programmed as Backspace while plugging in the keyboard.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/exent/rules.mk

@@ -0,0 +1,28 @@
+# MCU name
+MCU = atmega32a
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = bootloadHID
+
+# build options
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = no
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = yes
+COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+SRC += i2c_master.c
+
+LAYOUTS = 65_ansi 65_iso

keyboards/exent/usbconfig.h

@@ -0,0 +1,383 @@
+#pragma once
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT 3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT 2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ (F_CPU / 1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC 0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER 3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT 0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE 0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL 1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED 0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER 500
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE 1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ 0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL 0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE 0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS 0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF 1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING 0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC 0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION 0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
+#define USB_CFG_VENDOR_NAME_LEN 13
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
+#define USB_CFG_DEVICE_NAME_LEN 8
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS 0
+#define USB_CFG_DEVICE_SUBCLASS 0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS 3    /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE 0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS 0
+#define USB_CFG_DESCR_PROPS_STRING_0 0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT INTF1
+#define USB_INTR_VECTOR INT1_vect

keyboards/fc660c/rules.mk

@@ -11,7 +11,6 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/geekboards/tester/rules.mk

@@ -1,52 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# project specific files
+# Bootloader selection
-#SRC =
+#   Teensy       halfkay
-
+#   Pro Micro    caterina
-# Processor frequency.
+#   Atmel DFU    atmel-dfu
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   LUFA DFU     lufa-dfu
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   QMK DFU      qmk-dfu
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   ATmega32A    bootloadHID
-#     automatically to create a 32-bit value in your source code.
+#   ATmega328P   USBasp
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
 BOOTLOADER = qmk-dfu
 
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/georgi/rules.mk

@@ -1,18 +1,15 @@
-#----------------------------------------------------------------------------
+# MCU name
-# make georgi:default:dfu
-# Make sure you have dfu-programmer installed!
-# Do not edit this file! Make a copy of keymaps/default and modify that!
-#----------------------------------------------------------------------------
-# Source includes
-SRC += matrix.c i2c_master.c sten.c
-
-# Hardware info
 MCU = atmega32u4
-F_CPU = 16000000
+
-ARCH = AVR8
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
-F_USB = $(F_CPU)
-EXTRAFLAGS += -flto
 
 CUSTOM_MATRIX 		= yes
 MOUSEKEY_ENABLE		= no
@@ -21,3 +18,6 @@ EXTRAKEY_ENABLE     = yes
 CONSOLE_ENABLE      = yes
 COMMAND_ENABLE      = no
 NKRO_ENABLE			= yes
+
+EXTRAFLAGS += -flto
+SRC += matrix.c i2c_master.c sten.c

keyboards/gergo/rules.mk

@@ -1,18 +1,15 @@
-#----------------------------------------------------------------------------
+# MCU name
-# make gergo:germ:dfu
-# Make sure you have dfu-programmer installed!
-# Do not edit this file! Make a copy of keymaps/default and modify that!
-#----------------------------------------------------------------------------
-# Source includes
-SRC += matrix.c 
-QUANTUM_LIB_SRC += i2c_master.c
-
-# Hardware info
 MCU = atmega32u4
-F_CPU = 16000000
+
-ARCH = AVR8
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
-F_USB = $(F_CPU)
 
 CUSTOM_MATRIX 		= yes
 EXTRAKEY_ENABLE		= yes
@@ -21,3 +18,5 @@ COMMAND_ENABLE		= yes
 BOOTMAGIC_ENABLE = lite
 
 DEBOUNCE_TYPE  = eager_pr
+SRC += matrix.c
+QUANTUM_LIB_SRC += i2c_master.c

keyboards/gh60/revc/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   comment out to disable the options.

keyboards/gh60/satan/rules.mk

@@ -1,48 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Build Options
 #   comment out to disable the options.

keyboards/gh80_3000/rules.mk

@@ -1,45 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   comment out to disable the options.

keyboards/gonnerd/rules.mk

@@ -1,51 +1,18 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Processor frequency
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
 F_CPU = 8000000
 
-
+# Bootloader selection
-#
+#   Teensy       halfkay
-# LUFA specific
+#   Pro Micro    caterina
-#
+#   Atmel DFU    atmel-dfu
-# Target architecture (see library "Board Types" documentation).
+#   LUFA DFU     lufa-dfu
-ARCH = AVR8
+#   QMK DFU      qmk-dfu
-
+#   ATmega32A    bootloadHID
-# Input clock frequency.
+#   ATmega328P   USBasp
-#     This will define a symbol, F_USB, in all source code files equal to the
+BOOTLOADER = atmel-dfu
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/gray_studio/cod67/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = lufa-ms
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/gray_studio/space65/info.json

@@ -5,8 +5,12 @@
     "width": 16, 
     "height": 5, 
     "layouts": {
-        "LAYOUT_65_ansi_blocker": {
+        "LAYOUT": {
             "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+        },
+
+        "LAYOUT_65_ansi_blocker": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
         }
     }
-}
+}

keyboards/gray_studio/space65/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #
@@ -79,4 +32,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
-LAYOUTS = 65_ansi_blocker
+LAYOUTS = 65_ansi_blocker

keyboards/grid600/press/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/gskt00/rules.mk

@@ -1,41 +1,14 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/handwired/splittest/teensy_2/config.h

@@ -27,5 +27,7 @@
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
 
+// teensy has vbus detection issues - use usb detection instead
+#define SPLIT_USB_DETECT
 // required for teensy slave otherwise it "locks up" during startup
 #define NO_USB_STARTUP_CHECK

keyboards/handwired/splittest/teensy_2/teensy_2.c

@@ -1,14 +0,0 @@
-#include QMK_KEYBOARD_H
-
-bool is_keyboard_master(void) {
-    // TODO: replace this override once USB host detection is implemented
-    // SPLIT_HAND_PIN Combined with MASTER_LEFT or MASTER_RIGHT, gives a crude
-    // way to force teensy to run as slave/master
-    setPinInput(SPLIT_HAND_PIN);
-
-#if defined(MASTER_RIGHT)
-    return !readPin(SPLIT_HAND_PIN);
-#else
-    return readPin(SPLIT_HAND_PIN);
-#endif
-}

keyboards/keebio/iris/keymaps/gary/README.md

@@ -0,0 +1,18 @@
+# Gary's Iris Layout
+
+My personal keymap for my Iris.
+
+Copyright 2019 Gary @garyjzhao
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.

keyboards/keebio/iris/keymaps/gary/config.h

@@ -0,0 +1,12 @@
+#pragma once
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS

keyboards/keebio/iris/keymaps/gary/keymap.c

@@ -0,0 +1,47 @@
+#include "gary.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     ESC , 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,BSPC,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     TAB , Q  , W  , E  , R  , T  ,                Y  , U  , I  , O  , P  ,DEL ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     RASE, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----   +----+----+----.    ,----|----+----+----+----+----+----|
+     LSFT, Z  , X  , C  , V  , B  ,NEXT,     FULL , N  , M  ,COMM,DOT ,SLSH,SFTENT,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                       LGUI,LOWR,SPC ,        GARY, ENT,LALT
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+
+  [_LOWER] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+    GRV ,EXLM, AT ,HASH,DLR ,PERC,                CIRC,AMPR,ASTR,LPRN,RPRN,BSPC,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     CLTB,    ,CNTR,UPLF,UPRG,    ,                   ,    ,PLUS,LBRC,RBRC,OPASS,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,LHLF,RHLF,DNLF,DNRG,    ,                   ,    ,MINS,    ,    ,PIPE,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|`
+         ,    ,    ,CTLC,    ,    ,    ,         ,    ,    ,    ,EQL ,    ,UNDS ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,DEL ,        BSPC ,    ,
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_RAISE] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     TILD, F1 , F2 , F3 ,SHOT, F5 ,                F6 , F7 , F8 , F9 ,F10 ,F11 ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,MPRV,MPLY,MNXT,    ,    ,                   ,PGUP, UP ,PGDN,    ,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,    ,VOLD,VOLU,MUTE,    ,                   ,LEFT,DOWN,RGHT,    ,    ,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,    ,      RST,    ,    ,    ,    ,    ,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                            ,LALT,    ,             ,    ,
+  //                  `----+----+----'        `----+----+----'
+  ),
+};

keyboards/keebio/iris/keymaps/gary/rules.mk

@@ -0,0 +1,2 @@
+RGBLIGHT_ENABLE = no
+EXTRAKEY_ENABLE = yes

keyboards/kingly_keys/little_foot/info.json

@@ -9,8 +9,9 @@
       "key_count": 44,
       "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":1.5, "y":4, "w":1.5}, {"x":3, "y":4, "w":2}, {"x":5, "y":4, "w":2}, {"x":7, "y":4, "w":1.5}]
     },
-      "LAYOUT_big_space_base": {
+    "LAYOUT_big_space_base": {
-        "key_count": 41,
+      "key_count": 41,
-        "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":1.5, "y":4, "w":7}]
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":1.5, "y":4, "w":7}]
     }
+  }
 }

keyboards/preonic/keymaps/laurentlaurent/config.h

@@ -0,0 +1,41 @@
+#pragma once
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PREONIC_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MUSIC_MASK (keycode != KC_NO)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+// Fix Home Row mod keys
+#define IGNORE_MOD_TAP_INTERRUPT
+//#define RETRO_TAPPING

keyboards/preonic/keymaps/laurentlaurent/keymap.c

@@ -0,0 +1,603 @@
+/* Laurent's Preonic Layout
+ */
+
+// For IntelliSense
+    #ifdef __INTELLISENSE__
+        #include "../../rev3/config.h"
+        #include "../../rev3/rev3.h"
+        enum dynamic_macro_keycodes {
+            DYN_REC_START1 = DYNAMIC_MACRO_RANGE,
+            DYN_REC_START2,
+            DYN_REC_STOP,
+            DYN_MACRO_PLAY1,
+            DYN_MACRO_PLAY2,
+        };
+        #define QMK_KEYBOARD_H "rev3.h"
+    #endif
+
+    #include QMK_KEYBOARD_H
+    #include "muse.h"
+
+// ==== These keys allows usage of the home row as modifiers (when held) ====
+// Very bad for gaming, switch to gaming layout
+
+    // For _QWERTY_MAC
+        // S and L into Ctrl
+    #define LCT_S LCTL_T(KC_S)
+    #define LCT_L LCTL_T(KC_L)
+        // F, J and Z into CMD
+    #define LWN_F LGUI_T(KC_F)
+    #define LWN_Z LGUI_T(KC_Z)
+    #define LWN_J LGUI_T(KC_J)
+
+    // For _QWERTY_WIN
+        // S and L into WIN
+    #define LWN_S LGUI_T(KC_S)
+    #define LWN_L LGUI_T(KC_L)
+        // F, J and Z into Ctrl
+    #define LCT_F LCTL_T(KC_F)
+    #define LCT_Z LCTL_T(KC_Z)
+    #define LCT_J LCTL_T(KC_J)
+
+// ============================================================================
+
+// ==== For All ====
+
+    // Layout helper
+        #define __LYB__ KC_TRANSPARENT
+
+    // Mod Tap
+            // Changing K and D into Alt
+        #define LAT_D LALT_T(KC_D)
+        #define LAT_K LALT_T(KC_K)
+            // Equal into Ctrl+Alt+Cmd
+        #define LCAGEQ LCAG_T(KC_EQUAL)
+            // Esc into Meh
+        #define LMHESC MEH_T(KC_ESC)
+            // Space into Shift
+        #define LSHFSP SFT_T(KC_SPACE)
+            // Backspace into Shift
+        #define LSHFBK SFT_T(KC_BSPACE)
+
+    // Switching layers
+        #define LTO_BS TO(_QWERTY_MAC)          // Go to Base Layer
+            // Go to _NAV
+        #define LLY_SC LT(_NAV, KC_SCLN)        // From ;
+        #define LLY_A LT(_NAV, KC_A)            // From A
+            // Go to _PUNC
+        #define LLY_TB LT(_PUNC, KC_TAB)        // From Tab
+        #define LLY_BK LT(_PUNC, KC_BSPACE)     // From Backspace
+        #define LLY_BS LT(_PUNC, KC_BSLASH)     // From Backslash
+            // Others
+        #define LLY_GR LT(_ONEHD, KC_GRV)       // Go to _ONEHD from `
+        #define LLY_ET LT(_EXTRA, KC_ENT)       // Go to _EXTRA from Enter
+        #define LLSWIT MO(_LYSWT)               // Layer Switcher
+        #define LLY_DL LT(_NUM, KC_DEL)         // Go to _NUM from Delete
+
+    // Shortcuts
+        // Mac Windows Resizing
+        #define LMW_L3 LCA(KC_E)                // Resize to 2/3 and move to the left
+        #define LMW_FS LCA(KC_ENTER)            // Resize to full screen
+        #define LMW_R3 LCA(KC_T)                // Resize to 2/3 and move to the right
+        #define LMW_L1 LCA(KC_D)                // Resize to 1/3 and move to the left
+        #define LMW_M1 LCA(KC_F)                // Resize to 1/3 and move to middle
+        #define LMW_R1 LCA(KC_G)                // Resize to 1/3 and move to right
+        #define LMW_TL LCA(KC_U)                // Fit on Top Left corner
+        #define LMW_TR LCA(KC_I)                // Fit on Top Left corner
+        #define LMW_BL LCA(KC_J)                // Fit on Top Left corner
+        #define LMW_BR LCA(KC_K)                // Fit on Top Left corner
+        #define LMW_LT LCA(KC_LEFT)             // Resize to 1/2 horizontally and move to the left
+        #define LMW_BT LCA(KC_DOWN)             // Resize to 1/2 vertically and move to the bottom
+        #define LMW_TP LCA(KC_UP)               // Resize to 1/2 vertically and move to the top
+        #define LMW_RT LCA(KC_RIGHT)            // Resize to 1/2 horizontally and move to the right
+
+// ==== Audio ====
+    #ifdef AUDIO_ENABLE
+        #include "audio.h"
+        float tone_macro1_record[][2]     = SONG(CAPS_LOCK_ON_SOUND);
+        float tone_macro2_record[][2]     = SONG(SCROLL_LOCK_ON_SOUND);
+        float tone_macro_record_stop[][2] = SONG(SCROLL_LOCK_OFF_SOUND);
+    #endif
+
+enum preonic_layers {
+    _QWERTY_MAC,
+    _QWERTY_WIN,
+    _GAMING,
+    _MUSIC,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+    _PUNC,
+    _EXTRA,
+    _NUM,
+    _NAV,
+    _ONEHD,
+    _LYSWT };
+
+enum preonic_keycodes {
+    QWERTY = SAFE_RANGE,
+    QWWIN,
+    // COLEMAK,
+    // DVORAK,
+    LOWER,
+    RAISE,
+    BACKLIT,
+    DYNAMIC_MACRO_RANGE,
+};
+
+#include "dynamic_macro.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Qwerty for Mac
+     * ,-----------------------------------------------------------------------------------.
+     * | CAG= |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |  -   |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | LY|TB|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | LY|\ |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * | Hyper| LY|A | CT/S | AT/D | WN/F |   G  |   H  | WN/J | AT/K | CT/L | LY|; |  "   |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * | Shift| WN/Z |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Sh/Bk|
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | LY|` |ESCMEH| LY|DL|LW|Bkp|LY|Bkp| Shift/Space |LY|ENT|RS|Bkp|   [  |   ]  |LY_SW |
+     * `-----------------------------------------------------------------------------------'
+     * LY|` 	-> To _NUM
+     * LY|; 	-> To _NAV
+     * LY|A 	-> To _NAV
+     * LY|TB 	-> To _PUNC
+     * LY|\ 	-> To _PUNC
+     * LY|Bkp 	-> To _PUNC
+     * LY|ENT 	-> To_EXTRA
+     */
+    [_QWERTY_MAC] = LAYOUT_preonic_grid( \
+        LCAGEQ,	    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINUS,
+        LLY_TB,     KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    LLY_BS,
+        KC_HYPR,    LLY_A, 	 LCT_S,   LAT_D,   LWN_F,   KC_G,    KC_H,    LWN_J,   LAT_K,   LCT_L,   LLY_SC,  KC_QUOT,
+        KC_LSFT,    LWN_Z,   KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, LSHFBK,
+        LLY_GR,     LMHESC,  LLY_DL,  LOWER,   LLY_BK,  LSHFSP,  LSHFSP,  LLY_ET,  RAISE,   KC_LBRC, KC_RBRC, LLSWIT
+    ),
+
+    /* Qwerty for Windows
+     * ,-----------------------------------------------------------------------------------.
+     * | CAG= |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |  -   |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | LY|TB|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | LY|\ |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * | Hyper| LY|A | WN/S | AT/D | CT/F |   G  |   H  | CT/J | AT/K | WN/L | LY/; |  "   |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * | Shift| CT/Z |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Sh/Bk|
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | LY|` |MH/ESC| LY|DL|LW|Bkp|LY|Bk |    Space    |LY|ENT|RS|Bkp|   [  |   ]  |LY_SW |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [_QWERTY_WIN] = LAYOUT_preonic_grid( \
+        LCAGEQ,	    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINUS,
+        LLY_TB,     KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    LLY_BS,
+        KC_HYPR,    LLY_A, 	 LWN_S,   LAT_D,   LCT_F,   KC_G,    KC_H,    LCT_J,   LAT_K,   LWN_L,   LLY_SC,  KC_QUOT,
+        KC_LSFT,    LCT_Z,   KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, LSHFBK,
+        LLY_GR,     LMHESC,  LLY_DL,  LOWER,   LLY_BK,  LSHFSP,  LSHFSP,  LLY_ET,  RAISE,   KC_LBRC, KC_RBRC, LLSWIT
+    ),
+
+    /* Gaming
+     * ,-----------------------------------------------------------------------------------.
+     * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |  -   |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |  \   |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * | Ctrl |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  | LY|; |  "   |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  =   |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | Ctrl | ESC  |  Alt |LW|Bkp|LY|Bk |    Space    |LY|ENT|RS|Bkp|   [  |   ]  |LY_SW |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [_GAMING] = LAYOUT_preonic_grid( \
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINUS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLASH,
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    LLY_SC,  KC_QUOT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_EQUAL,
+        KC_LCTL, KC_ESC,  KC_LALT, LOWER,   LLY_BK,  KC_SPC,  KC_SPC,  LLY_ET,  RAISE,   KC_LBRC, KC_RBRC, LLSWIT
+    ),
+
+    /* Music Layer (Switch to this layer if want to use music mode)
+     * ,-----------------------------------------------------------------------------------.
+     * | Esc  | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * |      | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * |      | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | CTRL | ALT  | CMD  |      | XXXX |    Space    | XXXX |      | XXXX | XXXX |LY_SW |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [_MUSIC] = LAYOUT_preonic_grid( \
+        KC_ESC ,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+        XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+        _______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+        _______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+        KC_LCTL,  KC_LALT,  KC_LGUI,  _______,  XXXXXXX,  KC_SPC,   KC_SPC,   XXXXXXX,  _______,  XXXXXXX,  XXXXXXX,  LLSWIT
+    ),
+
+    /* Lower
+     * ,-----------------------------------------------------------------------------------.
+     * | ESC  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 | F11  |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * | Tab  | Home |  Up  | End  | PGUP | XXXX | XXXX | XXXX | PrSc | Home | PGUP | Del  |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * |  "   | Left | Down | Right|PGDWN | XXXX | XXXX | XXXX | Pause| End  |PGDWN | F12  |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * |      | CTRL |  Alt |  CMD | XXXX | XXXX | XXXX | XXXX | Prev | Play | Next | INS  |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | CTRL |  Alt |  CMD | !!!! | Bksp |    Space    | Enter|      | Vol- | Vol+ |LY_SW |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [_LOWER] = LAYOUT_preonic_grid( \
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_F11,
+        KC_TAB,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSCR, KC_HOME, KC_PGUP,  KC_DEL,
+        KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, XXXXXXX, XXXXXXX, XXXXXXX, KC_PAUS, KC_END,  KC_PGDN,  KC_F12,
+        _______, KC_LCTL, KC_LALT, KC_LGUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT,  KC_INS,
+        KC_LCTL, KC_LALT, KC_LGUI, __LYB__, KC_BSPC, KC_SPC,  KC_SPC,  KC_ENT, _______, KC_VOLD, KC_VOLU,  LLSWIT\
+    ),
+
+    /* Raise
+     * ,-----------------------------------------------------------------------------------.
+     * | ESC  |  F1  |  F2  |  F3  |  F4  |  F5  | SCLK |   &  |   *  |   (  |   )  | Bksp |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | Tab  |  F7  |  F8  |  F9  |  F10 |  F11 | XXXX |   &  |   *  |   {  |   }  | Del  |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * | Caps |  F1  |  F2  |  F3  |  F4  |  F5  | XXXX |   -  |   =  |   [  |   ]  | XXXX |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * |      |  F7  |  F8  |  F9  |  F10 |  F11 | XXXX |ISO # |ISO \ | MRC1 | MRC2 | MRSP |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | CTRL |  Alt |  CMD |      | Bksp |    Space    | Enter| !!!! | MPL1 | MPL2 |LY_SW |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [_RAISE] = LAYOUT_preonic_grid( \
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,  KC_SLCK,  KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
+        KC_TAB,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10, XXXXXXX,  KC_AMPR, KC_ASTR, KC_LCBR, KC_RCBR, KC_DEL,
+        KC_CLCK, KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15, XXXXXXX,  KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, XXXXXXX,
+        _______, KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20, XXXXXXX,  KC_NUHS, KC_NUBS, DYN_REC_START1,   DYN_REC_START2, DYN_REC_STOP,
+        KC_LCTL, KC_LALT, KC_LGUI, _______, KC_BSPC, KC_SPC,  KC_SPC,  KC_ENT,  __LYB__, DYN_MACRO_PLAY1,  DYN_MACRO_PLAY2, LLSWIT
+    ),
+
+    /* Adjust (Lower + Raise)
+     * ,-----------------------------------------------------------------------------------.
+     * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | Tab  | Reset|      |      |      |      |      |      |      |      |      | XXXX |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * |      |      |      |Aud on|AudOff|QWmac |QWwin |QWmac |QWin  |      |      |  F12 |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * |      |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff|      |      |      |      |      |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * |      |      |      |      |      |             |      |      |      |      |LY_SW |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [_ADJUST] = LAYOUT_preonic_grid( \
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_F11,
+        KC_TAB,  RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, XXXXXXX,
+    /*_______, _______, MU_MOD,  AU_ON,   AU_OFF,  QWERTY,  QWWIN,	 QWERTY,  COLEMAK, DVORAK,  _______, _______, \ Remove this if adding Colemak and Dvorak*/
+        _______, _______, MU_MOD,  AU_ON,   AU_OFF,  QWERTY,  QWWIN,   QWERTY,  QWWIN,   _______, _______, KC_F12,
+        _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, LLSWIT
+    ),
+
+    /* Punctuation Layer
+     * ,-----------------------------------------------------------------------------------.
+     * |  +   |  !   |  @   |  #   |  $   |  %   |  ^   |  &   |  *   |  (   |   )  |  _   |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | !!!! |  &   |  |   |  {   |   }  |  -   |  -   | XXXX | XXXX |  {   |   }  |  |(!)|
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * |  "   |  /   |  *   |  (   |   )  |  +   |  +   | XXXX | XXXX |  [   |   ]  |  "   |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * |      |  \   |  %   |  [   |   ]  |  =   |  =   | XXXX |   <  |  >   |   ?  | INS  |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * |  ~   |  _   |  ^   | Del  | !!!! |    Space    | Enter| XXXX |  [   |   ]  |LY_SW |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [_PUNC] = LAYOUT_preonic_grid( \
+        KC_PLUS,  KC_EXLM,  KC_AT,    KC_HASH,  KC_DLR,   KC_PERC,  KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN,  KC_UNDS,
+        __LYB__,  KC_AMPR,  KC_PIPE,  KC_LCBR,  KC_RCBR,  KC_MINS,  KC_MINS,  XXXXXXX,  XXXXXXX,  KC_LCBR,  KC_RCBR,  KC_PIPE,
+        KC_DQUO,  KC_SLSH,  KC_ASTR,  KC_LPRN,  KC_RPRN,  KC_PLUS,  KC_PLUS,  XXXXXXX,  XXXXXXX,  KC_LBRC,  KC_RBRC,  KC_DQUO,
+        _______,  KC_BSLS,  KC_PERC,  KC_LBRC,  KC_RBRC,  KC_EQL,   KC_EQL,   XXXXXXX,  KC_LABK,  KC_RABK,  KC_QUES,  KC_INS,
+        KC_TILDE, KC_UNDS,  KC_CIRC,  KC_DEL,   __LYB__,  KC_SPC,   KC_SPC,   KC_ENT,   XXXXXXX,  KC_LBRC,  KC_RBRC,  LLSWIT
+    ),
+
+    /* Extra Layer
+     * ,-----------------------------------------------------------------------------------.
+     * |  ESC |      |      |      |      |      | SCLK |      |      |      |      |      |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | Tab  |      |      |      |      |      |      |      |      |      |      | Del  |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * | Caps |      |      |      |      |      |      |      |      |      |      |      |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * |      |      |      |      |      |      |      |      | MRC1 | MRC2 | MRSP |	   |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | CTRL |  ALT |  CMD |  Del | Bksp |    Space    | !!!! |      | MPL1 | MPL2 |LY_SW |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [_EXTRA] = LAYOUT_preonic_grid( \
+        KC_ESC,   _______,  _______,  _______,  _______,  KC_SLCK,  _______,  _______,  _______,  _______,  _______,  _______,
+        KC_TAB,   _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  KC_DEL,
+        KC_CLCK,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  DYN_REC_START1, DYN_REC_START2, DYN_REC_STOP,
+        KC_LCTL,  KC_LALT,  KC_LGUI,  KC_DEL,  KC_BSPC,  KC_SPC,   KC_SPC,   __LYB__,  _______,  DYN_MACRO_PLAY1, DYN_MACRO_PLAY2,  LLSWIT
+    ),
+
+    /* Numeric Pad
+     * ,-----------------------------------------------------------------------------------.
+     * |  ESC | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | NMLK | NUM/ | NUM* | NUM- | XXXX |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * |      | Home |  Up  | End  | PGUP | XXXX | XXXX | NUM7 | NUM8 | NUM9 | NUM+ | XXXX |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * | XXXX | Left | Down | Right| PGDWN| XXXX | XXXX | NUM4 | NUM5 | NUM6 | NUM+ | XXXX |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * |      | CTRL |  ALT | CMD  | XXXX | XXXX | XXXX | NUM1 | NUM2 | NUM3 | NENT | Bksp |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * |      | XXXX | !!!! | XXXX | Bksp |    Space    | NUM0 | NUM0 | NUM. | NENT | QMAC |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [_NUM] = LAYOUT_preonic_grid( \
+        KC_ESC ,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,  XXXXXXX,
+        _______,  KC_HOME,  KC_UP,    KC_END,   KC_PGUP,  XXXXXXX,  XXXXXXX,  KC_P7,    KC_P8,    KC_P9,    KC_PPLS,  XXXXXXX,
+        KC_DQUO,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_PGDN,  XXXXXXX,  XXXXXXX,  KC_P4,    KC_P5,    KC_P6,    KC_PPLS,  XXXXXXX,
+        _______,  KC_LCTL,  KC_LALT,  KC_LGUI,  XXXXXXX,  XXXXXXX,  XXXXXXX,  KC_P1,    KC_P2,    KC_P3,    KC_PENT,  KC_BSPC,
+        _______,  XXXXXXX,  __LYB__,  XXXXXXX,  KC_BSPC,  KC_SPC,   KC_SPC,   KC_P0,    KC_P0,    KC_PDOT,  KC_PENT,  LTO_BS
+    ),
+
+    /* NAV
+     * ,-----------------------------------------------------------------------------------.
+     * |  ESC |      |      | MOB3 |      |      |      |      |      |      |      |      |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * |      |   A  | MOB2 | MOUP | MOB1 | MOSU | PGUP | Home |  Up  | End  |      | Del  |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * |      | !!!! | MOLF | MODN | MORT | MOSD | PGDN | Left | Down | Right| !!!! |      |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * |      |      | MOB4 | MOB5 | MOSL | MOSR | MOA2 | MOA0 | MPRV | MPLY | MNXT |      |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | CTRL | ALT  | CMD  |      | Bksp |    Space    | Enter| VILM | VOLD | VOLU | QMAC |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [_NAV] = LAYOUT_preonic_grid( \
+        KC_ESC,   _______,  _______,  KC_BTN3,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+        _______,  KC_A,     KC_BTN2,  KC_MS_U,  KC_BTN1,  KC_WH_U,  KC_PGUP,  KC_HOME,  KC_UP,    KC_END,   _______,  KC_DEL,
+        _______,  __LYB__,  KC_MS_L,  KC_MS_D,  KC_MS_R,  KC_WH_D,  KC_PGDN,  KC_LEFT,  KC_DOWN,  KC_RGHT,  __LYB__,  _______,
+        _______,  _______,  KC_BTN4,  KC_BTN5,  KC_WH_L,  KC_WH_R,  KC_ACL2,  KC_ACL0,  KC_MPRV,  KC_MPLY,  KC_MNXT,  _______,
+        KC_LCTL,  KC_LALT,  KC_LGUI,  _______,  KC_BSPC,  KC_SPC,   KC_SPC,   KC_ENT,   KC_MUTE,  KC_VOLD,  KC_VOLU,  LTO_BS
+    ),
+
+        /* One-Handed
+    * ,-----------------------------------------------------------------------------------.
+    * | Esc  |  6   |   7  |   8  |   9  |   0  |   -  | XXXX | XXXX | XXXX | XXXX | XXXX |
+    * |------+------+------+------+------+------+------+------+------+------+------+------|
+    * |      |   Y  |   U  |   I  |   O  |   P  | MWL3 | MWFS | MWR3 | MWTL | MWTR | XXXX |
+    * |------+------+------+------+------+-------------+------+------+------+------+------|
+    * |      |   H  |   J  |   K  |   L  |   :  | MWL1 | MWM1 | MWR1 | MWBL | MWBR | XXXX |
+    * |------+------+------+------+------+------|------+------+------+------+------+------|
+    * |      |   N  |   M  |   ,  |   .  |   /  | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+    * |------+------+------+------+------+------+------+------+------+------+------+------|
+    * | !!!! |  Esc |  Del |  Ent | Bksp |             | MWLT | MWBT | MWUP | MWRT |LY_SW |
+    * `-----------------------------------------------------------------------------------'
+    */
+    [_ONEHD] = LAYOUT_preonic_grid( \
+        KC_ESC ,  KC_6,     KC_7,     KC_8,     KC_9,      KC_0,     KC_MINUS, XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX,
+        _______,  KC_Y,     KC_U,     KC_I,     KC_O,      KC_P,     LMW_L3,   LMW_FS,   LMW_R3,   LMW_TL,   LMW_TR,  XXXXXXX,
+        _______,  KC_H,     KC_J,     KC_K,     KC_L,      KC_SCLN,  LMW_L1,   LMW_M1,   LMW_R1,   LMW_BL,   LMW_BR,  XXXXXXX,
+        _______,  KC_N,     KC_M,     KC_COMM,  KC_DOT,    KC_SLSH,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, XXXXXXX,
+        __LYB__,  KC_ESC,  KC_DEL,    KC_ENT,   KC_BSPACE, KC_SPC,   KC_SPC,   LMW_LT,   LMW_BT,   LMW_TP,   LMW_RT,  LLSWIT
+    ),
+
+    /* Layer Switcher
+     * ,-----------------------------------------------------------------------------------.
+     * | Esc  | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * |Brite | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+     * |------+------+------+------+------+-------------+------+------+------+------+------|
+     * | XXXX | XXXX | XXXX | XXXX | XXXX | GAME | XXXX | XXXX | XXXX | XXXX | NAV  | XXXX |
+     * |------+------+------+------+------+------|------+------+------+------+------+------|
+     * |      | XXXX | XXXX | XXXX | XXXX | QMAC | XXXX | MUSC | XXXX | XXXX | XXXX | XXXX |
+     * |------+------+------+------+------+------+------+------+------+------+------+------|
+     * | XXXX | XXXX | NUM  | XXXX | XXXX |    XXXXX    | XXXX | XXXX | XXXX | XXXX | !!!! |
+     * `-----------------------------------------------------------------------------------'
+     */
+    [_LYSWT] = LAYOUT_preonic_grid( \
+        KC_ESC ,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  	XXXXXXX,  XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+        BACKLIT,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  	XXXXXXX,  XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+        XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  TO(_GAMING), XXXXXXX,  XXXXXXX,   XXXXXXX,  XXXXXXX,  TO(_NAV), XXXXXXX,
+        XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  LTO_BS,   	XXXXXXX, TO(_MUSIC), XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,
+        XXXXXXX,   XXXXXXX,  TO(_NUM), XXXXXXX,  XXXXXXX,  XXXXXXX,  	XXXXXXX,  XXXXXXX,   XXXXXXX,  XXXXXXX,  XXXXXXX,  _______
+    ) //, //Don't forget to add the comma if going to add more layers here
+};
+
+static uint16_t key_timer;
+static uint16_t timer_thresh = 200;
+bool            process_record_user(uint16_t keycode, keyrecord_t *record) {
+    // For dynamic macros
+    if (!process_record_dynamic_macro(keycode, record)) {
+// Play sound on Macro stop
+#ifdef AUDIO_ENABLE
+        switch (keycode) {
+            case DYN_REC_STOP:
+                if (record->event.pressed) {
+                    PLAY_SONG(tone_macro_record_stop);
+                }
+                return false;
+                break;
+        }
+#endif
+        return false;
+    }
+
+    switch (keycode) {
+        case QWERTY:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_QWERTY_MAC);
+            }
+            return false;
+            break;
+        case QWWIN:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_QWERTY_WIN);
+            }
+            return false;
+            break;
+        // Reinstate these cases if COLEMAK, DVORAK are included in the layouts
+        /*case COLEMAK:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_COLEMAK);
+            }
+            return false;
+            break;
+        case DVORAK:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_DVORAK);
+            }
+            return false;
+            break;
+          */
+        case LOWER:
+            if (record->event.pressed) {
+                key_timer = timer_read(); // For Backspace on tap
+                layer_on(_LOWER);
+                update_tri_layer(_LOWER, _RAISE, _ADJUST);
+            } else {
+                // Backspace on tap
+                if (timer_elapsed(key_timer) < timer_thresh) {
+                    tap_code(KC_BSPC);
+                }
+                layer_off(_LOWER);
+                update_tri_layer(_LOWER, _RAISE, _ADJUST);
+            }
+            return false;
+            break;
+        case RAISE:
+            if (record->event.pressed) {
+                key_timer = timer_read(); // For Backspace on tap
+                layer_on(_RAISE);
+                update_tri_layer(_LOWER, _RAISE, _ADJUST);
+            } else {
+                // Backspace on tap
+                if (timer_elapsed(key_timer) < timer_thresh) {
+                    tap_code(KC_BSPC);
+                }
+                layer_off(_RAISE);
+                update_tri_layer(_LOWER, _RAISE, _ADJUST);
+            }
+            return false;
+            break;
+        case BACKLIT:
+            if (record->event.pressed) {
+                register_code(KC_RSFT);
+#ifdef BACKLIGHT_ENABLE
+                backlight_step();
+#endif
+#ifdef __AVR__
+                PORTE &= ~(1 << 6);
+#endif
+            } else {
+                unregister_code(KC_RSFT);
+#ifdef __AVR__
+                PORTE |= (1 << 6);
+#endif
+            }
+            return false;
+            break;
+#ifdef AUDIO_ENABLE
+            // Play sound on Macro record start
+        case DYN_REC_START1:
+            if (record->event.pressed) {
+                PLAY_SONG(tone_macro1_record);
+            }
+            return false;
+            break;
+        case DYN_REC_START2:
+            if (record->event.pressed) {
+                PLAY_SONG(tone_macro2_record);
+            }
+            return false;
+            break;
+#endif
+    }
+    return true;
+};
+
+bool     muse_mode      = false;
+uint8_t  last_muse_note = 0;
+uint16_t muse_counter   = 0;
+uint8_t  muse_offset    = 70;
+uint16_t muse_tempo     = 50;
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (muse_mode) {
+        if (IS_LAYER_ON(_RAISE)) {
+            if (clockwise) {
+                muse_offset++;
+            } else {
+                muse_offset--;
+            }
+        } else {
+            if (clockwise) {
+                muse_tempo += 1;
+            } else {
+                muse_tempo -= 1;
+            }
+        }
+    } else {
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+             tap_code(KC_PGUP);
+        }
+    }
+}
+
+void dip_switch_update_user(uint8_t index, bool active) {
+    switch (index) {
+        case 0:
+            if (active) {
+                layer_on(_ADJUST);
+            } else {
+                layer_off(_ADJUST);
+            }
+            break;
+        case 1:
+            if (active) {
+                muse_mode = true;
+            } else {
+                muse_mode = false;
+            }
+    }
+}
+
+void matrix_scan_user(void) {
+#ifdef AUDIO_ENABLE
+    if (muse_mode) {
+        if (muse_counter == 0) {
+            uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()];
+            if (muse_note != last_muse_note) {
+                stop_note(compute_freq_for_midi_note(last_muse_note));
+                play_note(compute_freq_for_midi_note(muse_note), 0xF);
+                last_muse_note = muse_note;
+            }
+        }
+        muse_counter = (muse_counter + 1) % muse_tempo;
+    } else {
+        if (muse_counter) {
+            stop_all_notes();
+            muse_counter = 0;
+        }
+    }
+#endif
+}
+
+bool music_mask_user(uint16_t keycode) {
+    switch (keycode) {
+        case RAISE:
+        case LOWER:
+            return false;
+        default:
+            return true;
+    }
+}

keyboards/preonic/keymaps/laurentlaurent/readme.md

@@ -0,0 +1,252 @@
+# laurentlaurent's Preonic keyboard
+Largely similar to his [ErgoDox EZ](https://configure.ergodox-ez.com/ergodox-ez/layouts/jZpmo/latest/0)'s layout
+
+## Features
+
+### Special Modifiers for Global Shortcuts
+* Hyper key (Ctrl+Alt+Cmd+Shift)
+* CAG key (Ctrl+Alt+Cmd)
+* Meh key (Ctrl+Alt+Shift)
+
+### Home Row modifiers
+* Home Row modifiers (hold F/J to use CMD/Ctrl, D/L for Alt, ... )
+* Separate layers for Mac and Windows keyboard to improve muscle memory linked to Home Row modifiers (CMD is mapped to F and J on Mac, CTRL for Windows)
+* Extra CMD/CTRL key mapped to Z for one-handed CMD+F/CTRL+F
+
+### Qwerty Layout improvements
+* Backspace and Enter are on bottom row (next to Space bar)
+* = is where Esc would be expected to be
+* "-" is where Backspace would be expected to be
+* Grave is where LCTRL would be expected to be
+* Esc is where Alt (on Mac)/Win (on PC) would be expected to be
+* Del is where CMD (on Mac)/Alt (on PC) would be expected to be
+* Hyper key replaces Caps Lock
+
+### Mod taps
+* Home Row modifiers
+* Lower and Raise are Backspace on tap
+* Holding = is CAG (CTRL+ALT+CMD)
+* Holding Esc is MEH (Ctrl+Shift+Alt)
+* Right Shift is bound to RShift on hold, Backspace on tap
+* Spacebar acts like a LShift on hold, Spacebar on tap
+* In instances where repeated keys is needed:
+    * Tap then tap-hold repeats the key
+    * Lower, Raise (and most other layers) turns off mod-tap on most keys
+* Music layer disables all key mappings, Gaming layer disables modtaps
+
+### Layer Switching
+* Layer switcher key, used to switch layout (allows use of _NAV, _NUM layout without holding their layer keys)
+* **Punctuation layer** accessible by holding Tab, Backslash or Backspace
+* Grave switches to **One-Handed layer** on hold
+* **Mouse and arrow key layer** accessible by holding ; or A
+* Del switches to **Numpad** on hold
+* Enter switches to **Extra layer** on hold
+    * Extra layer will be used for applications shortcuts
+
+## Layers
+
+### Mac Qwerty
+```
+,-----------------------------------------------------------------------------------.
+| CAG/=|   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |  -   |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| LY|TB|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | LY|\ |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Hyper| LY|A | CT/S | AT/D | WN/F |   G  |   H  | WN/J | AT/K | CT/L | LY|; |  "   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+| Shift| WN/Z |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Sh/Bk|
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| LY|` |MH/ESC| LY|DL|LW|Bkp|LY|Bkp| Shift/Space |LY|ENT|RS|Bkp|   [  |   ]  |LY_SW |
+`-----------------------------------------------------------------------------------'
+```
+* Hold Tab (LY|TB), Backspace (LY|Bkp) or Backslash (LY|\ ) for **Punctuation Layer**
+* Hold Grave (LY|`) for **One-Handed Layer**
+* Hold Del (LY|DL) for **Numpad Layer**
+* Hold A or ; for **Navigation/Mouse Layer**
+* Hold Enter (LY|ENT) for **Extra layer**
+
+### Win Qwerty
+```
+,-----------------------------------------------------------------------------------.
+| CAG= |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |  -   |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| LY|TB|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | LY|\ |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Hyper| LY|A | WN/S | AT/D | CT/F |   G  |   H  | CT/J | AT/K | WN/L | LY/; |  "   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+| Shift| CT/Z |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Sh/Bk|
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| LY|` |ESCMEH| LY|DL|LW|Bkp|LY|Bk |    Space    |LY|ENT|RS|Bkp|   [  |   ]  |LY_SW |
+`-----------------------------------------------------------------------------------'
+```
+* Hold Tab (LY|TB), Backspace (LY|Bkp) or Backslash (LY|\ ) for **Punctuation Layer**
+* Hold Grave (LY|`) for **One-Handed Layer**
+* Hold Del (LY|DL) for **Numpad Layer**
+* Hold A or ; for **Navigation/Mouse Layer**
+* Hold Enter (LY|ENT) for **Extra layer**
+
+### Gaming Qwerty
+```
+,-----------------------------------------------------------------------------------.
+|   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |  -   |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |  \   |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Ctrl |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  | LY|; |  "   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+| Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  =   |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| Ctrl | ESC  |  Alt |LW|Bkp|LY|Bk |    Space    |LY|ENT|RS|Bkp|   [  |   ]  |LY_SW |
+`-----------------------------------------------------------------------------------'
+```
+
+### Music Layer
+```
+,-----------------------------------------------------------------------------------.
+| Esc  | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+|      | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| CTRL | ALT  | CMD  |      | XXXX |    Space    | XXXX |      | XXXX | XXXX |LY_SW |
+`-----------------------------------------------------------------------------------'
+```
+
+### Lower Layer
+```
+,-----------------------------------------------------------------------------------.
+| ESC  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 | F11  |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Tab  | Home |  Up  | End  | PGUP | XXXX | XXXX | XXXX | PrSc | Home | PGUP | Del  |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+|  "   | Left | Down | Right|PGDWN | XXXX | XXXX | XXXX | Pause| End  |PGDWN | F12  |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      | CTRL |  Alt |  CMD | XXXX | XXXX | XXXX | XXXX | Prev | Play | Next | INS  |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| CTRL |  Alt |  CMD | !!!! | Bksp |    Space    | Enter|      | Vol- | Vol+ |LY_SW |
+`-----------------------------------------------------------------------------------'
+```
+
+### Raise Layer
+```
+,-----------------------------------------------------------------------------------.
+| ESC  |  F1  |  F2  |  F3  |  F4  |  F5  | SCLK |   &  |   *  |   (  |   )  | Bksp |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| Tab  |  F7  |  F8  |  F9  |  F10 |  F11 | XXXX |   &  |   *  |   {  |   }  | Del  |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Caps |  F1  |  F2  |  F3  |  F4  |  F5  | XXXX |   -  |   =  |   [  |   ]  | XXXX |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |  F7  |  F8  |  F9  |  F10 |  F11 | XXXX |ISO # |ISO \ | MRC1 | MRC2 | MRSP |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| CTRL |  Alt |  CMD |      | Bksp |    Space    | Enter| !!!! | MPL1 | MPL2 |LY_SW |
+`-----------------------------------------------------------------------------------'
+```
+
+### Adjust Layer
+```
+,-----------------------------------------------------------------------------------.
+|      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| Tab  | Reset|      |      |      |      |      |      |      |      |      | XXXX |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+|      |      |      |Aud on|AudOff|QWmac |QWwin |QWmac |QWin  |      |      |  F12 |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff|      |      |      |      |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      |      |      |      |LY_SW |
+`-----------------------------------------------------------------------------------'
+```
+
+### Punctuation Layer
+```
+,-----------------------------------------------------------------------------------.
+|  +   |  !   |  @   |  #   |  $   |  %   |  ^   |  &   |  *   |  (   |   )  |  _   |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| !!!! |  &   |  |   |  {   |   }  |  -   |  -   | XXXX | XXXX |  {   |   }  |  |(!)|
+|------+------+------+------+------+-------------+------+------+------+------+------|
+|  "   |  /   |  *   |  (   |   )  |  +   |  +   | XXXX | XXXX |  [   |   ]  |  "   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |  \   |  %   |  [   |   ]  |  =   |  =   | XXXX |   <  |  >   |   ?  | INS  |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|  ~   |  _   |  ^   | Del  | !!!! |    Space    | Enter| XXXX |  [   |   ]  |LY_SW |
+`-----------------------------------------------------------------------------------'
+```
+
+### Extra Layer
+```
+,-----------------------------------------------------------------------------------.
+|  ESC |      |      |      |      |      | SCLK |      |      |      |      |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|  Tab |      |      |      |      |      |      |      |      |      |      | Del  |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Caps |      |      |      |      |      |      |      |      |      |      |      |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      | MRC1 | MRC2 | MRSP |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| CTRL |  ALT |  CMD | Del  | Bksp |    Space    | !!!! |      | MPL1 | MPL2 |LY_SW |
+`-----------------------------------------------------------------------------------'
+```
+
+### Numeric Pad Layer
+```
+,-----------------------------------------------------------------------------------.
+|  ESC | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | NMLK | NUM/ | NUM* | NUM- | XXXX |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      | Home |  Up  | End  | PGUP | XXXX | XXXX | NUM7 | NUM8 | NUM9 | NUM+ | XXXX |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| XXXX | Left | Down | Right| PGDWN| XXXX | XXXX | NUM4 | NUM5 | NUM6 | NUM+ | XXXX |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      | CTRL |  ALT | CMD  | XXXX | XXXX | XXXX | NUM1 | NUM2 | NUM3 | NENT | Bksp |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      | XXXX | !!!! | XXXX | Bksp |    Space    | NUM0 | NUM0 | NUM. | NENT | QMAC |
+`-----------------------------------------------------------------------------------'
+```
+
+### Navigation Layer
+```
+,-----------------------------------------------------------------------------------.
+|  ESC |      |      | MOB3 |      |      |      |      |      |      |      |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |   A  | MOB2 | MOUP | MOB1 | MOSU | PGUP | Home |  Up  | End  |      | Del  |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+|      | !!!! | MOLF | MODN | MORT | MOSD | PGDN | Left | Down | Right| !!!! |      |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |      | MOB4 | MOB5 | MOSL | MOSR | MOA2 | MOA0 | MPRV | MPLY | MNXT |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| CTRL | ALT  | CMD  |      | Bksp |    Space    | Enter| VILM | VOLD | VOLU | QMAC |
+`-----------------------------------------------------------------------------------'
+```
+
+### One-Handed Layer
+```
+,-----------------------------------------------------------------------------------.
+| Esc  |  6   |   7  |   8  |   9  |   0  |   -  | XXXX | XXXX | XXXX | XXXX | XXXX |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |   Y  |   U  |   I  |   O  |   P  | MWL3 | MWFS | MWR3 | MWTL | MWTR | XXXX |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+|      |   H  |   J  |   K  |   L  |   :  | MWL1 | MWM1 | MWR1 | MWBL | MWBR | XXXX |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |   N  |   M  |   ,  |   .  |   /  | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| !!!! |  Esc |  Del |  Ent | Bksp |             | MWLT | MWBT | MWUP | MWRT |LY_SW |
+`-----------------------------------------------------------------------------------'
+```
+The right hand side of the keyboard contains shortcuts for moving windows on Mac (using Magnet)
+
+### Layer Switcher
+```
+,-----------------------------------------------------------------------------------.
+| Esc  | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|Brite | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| XXXX | XXXX | XXXX | XXXX | XXXX | GAME | XXXX | XXXX | XXXX | XXXX | NAV  | XXXX |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      | XXXX | XXXX | XXXX | XXXX | QMAC | XXXX | MUSC | XXXX | XXXX | XXXX | XXXX |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| XXXX | XXXX | NUM  | XXXX | XXXX |    XXXXX    | XXXX | XXXX | XXXX | XXXX | !!!! |
+`-----------------------------------------------------------------------------------'
+```

keyboards/preonic/keymaps/laurentlaurent/rules.mk

@@ -0,0 +1,2 @@
+SRC += muse.c
+MOUSEKEY_ENABLE = yes

keyboards/preonic/keymaps/laurentlaurent/templates.c

@@ -0,0 +1,89 @@
+// Templates for Preonic Keyboard
+
+/* BLANK Pass through
+ * ,-----------------------------------------------------------------------------------.
+ * |  ESC |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | CTRL |  ALT |  CMD |      |      |             |      |      |      |      |LY_SW |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_BLANK] = LAYOUT_preonic_grid( \
+    KC_ESC ,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______, \
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______, \
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______, \
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______, \
+    KC_LCTL,  KC_LALT,  KC_LGUI,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  LLSWIT  \
+),
+
+/* BLANK No Pass through
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX | XXXX |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | CTRL | ALT  | CMD  |      | XXXX |             | XXXX |      | XXXX | XXXX |LY_SW |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_BLANK] = LAYOUT_preonic_grid( \
+    KC_ESC ,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, \
+    _______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, \
+    _______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, \
+    _______,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX,  XXXXXXX, \
+    KC_LCTL,  KC_LALT,  KC_LGUI,  _______,  XXXXXXX,  _______,  _______,  XXXXXXX,  _______,  XXXXXXX,  XXXXXXX,  LLSWIT  \
+),
+
+
+//===== From default preonic layouts
+// if you add this, make sure to add _COLEMAK and _DVORAK in the enum
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | XXXX | XXXX | XXXX |LY_SW |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT_preonic_grid( \
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+    KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL,  \
+    KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  \
+    BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   XXXXXXX, XXXXXXX, XXXXXXX, LLSWIT  \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | XXXX | XXXX | XXXX |LY_SW |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT_preonic_grid( \
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+    KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL,  \
+    KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT,  \
+    BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   XXXXXXX, XXXXXXX, XXXXXXX, LLSWIT  \
+),

keyboards/projectkb/alice/info.json

@@ -74,8 +74,8 @@
                 {"label":"Alt", "x":5, "y":4.25, "w":1.5},
                 {"label":"Space", "x":6.5, "y":4.25, "w":2},
                 {"label":"Menu", "x":8.5, "y":4.25},
-                {"label":"Space", "x":10.25, "y":4.25, "w":2.25},
+                {"label":"Space", "x":10.25, "y":4.25, "w":2.75},
-                {"label":"Alt", "x":12.5, "y":4.25, "w":1.5},
+                {"label":"Alt", "x":13, "y":4.25, "w":1.5},
                 {"label":"Ctrl", "x":18, "y":4.25, "w":1.5}
             ]
         }

keyboards/projectkb/alice/keymaps/devinceble/keymap.c

@@ -0,0 +1,41 @@
+/* Copyright 2019 Devinceble AKA Vimwarrior
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT_default(
+        KC_INS, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
+        KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+        KC_PGDN, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+        KC_LALT, KC_LGUI, KC_SPC, MO(2), KC_SPC, KC_RALT, KC_RCTL
+    ),
+	[1] = LAYOUT_default(
+        KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
+        KC_TRNS, KC_TRNS, KC_BTN1, KC_MS_U, KC_BTN2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_RGHT, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DOWN, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [2] = LAYOUT_default(
+        RGB_TOG, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL,
+        RGB_MOD, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAI, RGB_HUI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        RGB_RMOD, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, RGB_SAD, RGB_HUD, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, BL_INC, BL_DEC, BL_TOGG, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET
+    ),
+};

keyboards/projectkb/alice/keymaps/devinceble/readme.md

@@ -0,0 +1,9 @@
+# Devinceble AKA Vimwarrior ProjectKeyboard Alice
+
+Build Hex File:
+
+    make projectkb/alice:devinceble
+
+Flash Keyboard
+
+    make projectkb/alice:devinceble:flash

keyboards/projectkb/alice/keymaps/devinceble/rules.mk

@@ -0,0 +1 @@
+MOUSEKEY_ENABLE    = yes

keyboards/snagpad/config.h

@@ -48,9 +48,6 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 
-// Does not use WT_MONO_BACKLIGHT
-// #define WT_MONO_BACKLIGHT
-
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
 // EEPROM usage

keyboards/tada68/keymaps/devinceble/keymap.c

@@ -0,0 +1,42 @@
+/* Copyright 2019 Devinceble AKA Vimwarrior
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_ansi(
+    KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSLS,KC_GRV, \
+    KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSPC,KC_DEL, \
+    KC_CAPS, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT,KC_PGUP,  \
+    KC_LSFT,         KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,   KC_RSFT,MO(1),KC_PGDN, \
+    MO(2), KC_LGUI,KC_LALT,                KC_SPC,                        KC_RALT,KC_RCTRL, KC_LEFT,KC_DOWN,KC_UP,KC_RGHT),
+
+    [1] = LAYOUT_ansi(
+    _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS ,  \
+    _______,KC_BTN1, KC_MS_U,KC_BTN2,_______, _______,_______,_______,_______,_______,_______,KC_UP,_______, _______,KC_HOME, \
+    KC_CAPS,KC_MS_L,KC_MS_D,KC_MS_R,_______,_______,_______,_______,_______,_______,KC_LEFT,KC_RGHT,        _______,KC_END, \
+    _______,_______,_______,_______, _______,_______, _______,_______,_______,_______,KC_DOWN,_______, _______, _______, \
+    _______,_______,_______,                 _______,               _______,_______,_______,_______,_______, _______
+    ),
+
+    [2] = LAYOUT_ansi(
+    _______, KC_F1 ,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS ,  \
+    _______,_______, _______,_______,_______, _______,_______,_______,_______,_______,_______,_______,_______, _______,KC_HOME, \
+    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,KC_END, \
+    _______,_______,_______,BL_DEC, BL_TOGG,BL_INC, _______,KC_VOLD,KC_VOLU,KC_MUTE,_______,_______, _______, _______, \
+    _______,_______,_______,                 _______,               _______,_______,_______,_______,_______, _______
+    ),
+};

keyboards/tada68/keymaps/devinceble/readme.md

@@ -0,0 +1,6 @@
+# Devinceble AKA Vimwarrior TADA68 Keymap
+
+Build BIN File:
+
+    make tada68:devinceble
+

keyboards/tada68/keymaps/devinceble/rules.mk

@@ -0,0 +1,3 @@
+MOUSEKEY_ENABLE = yes
+
+

keyboards/wilba_tech/rama_works_koyu/rules.mk

@@ -1,5 +1,3 @@
-
-
 # project specific files
 SRC =	keyboards/wilba_tech/wt_main.c \
 		keyboards/wilba_tech/wt_rgb_backlight.c \
@@ -10,42 +8,14 @@ SRC =	keyboards/wilba_tech/wt_main.c \
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
 BOOTLOADER = atmel-dfu
 
 # Do not put the microcontroller into power saving mode

keyboards/wilba_tech/rama_works_m10_b/config.h

@@ -181,8 +181,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-//#define WT_MONO_BACKLIGHT
-
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
 // EEPROM usage

keyboards/wilba_tech/rama_works_m10_b/rules.mk

@@ -4,44 +4,14 @@ SRC =	keyboards/wilba_tech/wt_main.c
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
 BOOTLOADER = atmel-dfu
 
 

keyboards/wilba_tech/rama_works_m60_a/rules.mk

@@ -10,42 +10,14 @@ SRC =	keyboards/wilba_tech/wt_main.c \
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
 BOOTLOADER = atmel-dfu
 
 # Do not put the microcontroller into power saving mode

keyboards/wilba_tech/rama_works_m6_a/rules.mk

@@ -4,43 +4,14 @@ SRC =	keyboards/wilba_tech/wt_main.c
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
 BOOTLOADER = atmel-dfu
 
 # Do not put the microcontroller into power saving mode

keyboards/wilba_tech/rama_works_m6_b/rules.mk

@@ -5,47 +5,17 @@ SRC =	keyboards/wilba_tech/wt_main.c \
 		drivers/issi/is31fl3218.c \
 		drivers/avr/i2c_master.c
 
-
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Boot Section
 BOOTLOADER = atmel-dfu
 
 # Do not put the microcontroller into power saving mode

keyboards/wilba_tech/rama_works_u80_a/config.h

@@ -179,8 +179,6 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-//#define WT_MONO_BACKLIGHT
-
 // IS31FL3731 driver
 #define DRIVER_COUNT 3
 #define DRIVER_LED_TOTAL 108

keyboards/wilba_tech/rama_works_u80_a/rules.mk

@@ -8,44 +8,14 @@ SRC =	keyboards/wilba_tech/wt_main.c \
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
 BOOTLOADER = atmel-dfu
 
 

keyboards/wilba_tech/wt60_a/config.h

@@ -179,14 +179,33 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-#define WT_MONO_BACKLIGHT
+// enable the mono backlight
+#define MONO_BACKLIGHT_ENABLED 1
+
+// enable the RGB indicator for WT75-A
+#define MONO_BACKLIGHT_WT75_A
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define MONO_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect
+#define MONO_BACKLIGHT_EFFECT 1
+
+// the default effect speed (0-3)
+#define MONO_BACKLIGHT_EFFECT_SPEED 0
 
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
 // EEPROM usage
 
 // TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC 0x4520
 #define EEPROM_MAGIC_ADDR 34
 // Bump this every time we change what we store
 // This will automatically reset the EEPROM with defaults
@@ -194,9 +213,11 @@
 #define EEPROM_VERSION 0x08
 #define EEPROM_VERSION_ADDR 36
 
-// Dynamic keymap starts after EEPROM version
+// Backlight config starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
+#define MONO_BACKLIGHT_CONFIG_EEPROM_ADDR 37
-// Dynamic macro starts after dynamic keymaps (37+(4*5*14*2)) = (37+560)
+// Dynamic keymap starts after backlight config (37+7)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 597
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 44
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 427
+// Dynamic macro starts after dynamic keymaps (44+(4*5*14*2)) = (44+560)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 604
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 420
 #define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/wilba_tech/wt60_a/keymaps/via/rules.mk

@@ -1,71 +1,2 @@
-# project specific files
-SRC =	drivers/issi/is31fl3736.c \
-		drivers/avr/i2c_master.c \
-		keyboards/wilba_tech/wt_mono_backlight.c \
-		keyboards/wilba_tech/wt_main.c
-		
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-
 RAW_ENABLE = yes
 DYNAMIC_KEYMAP_ENABLE = yes

keyboards/wilba_tech/wt60_a/rules.mk

@@ -1,6 +1,7 @@
 # project specific files
 SRC =	drivers/issi/is31fl3736.c \
 		drivers/avr/i2c_master.c \
+		quantum/color.c \
 		keyboards/wilba_tech/wt_mono_backlight.c \
 		keyboards/wilba_tech/wt_main.c
 		

keyboards/wilba_tech/wt60_d/keymaps/via/rules.mk

@@ -1,68 +1,2 @@
-# project specific files
-SRC =	keyboards/wilba_tech/wt_main.c
-		
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-
 RAW_ENABLE = yes
 DYNAMIC_KEYMAP_ENABLE = yes

keyboards/wilba_tech/wt60_d/rules.mk

@@ -1,50 +1,19 @@
 # project specific files
 SRC =	keyboards/wilba_tech/wt_main.c
-		
+
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
 BOOTLOADER = atmel-dfu
 
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/wilba_tech/wt65_a/config.h

@@ -179,14 +179,30 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-#define WT_MONO_BACKLIGHT
+// enable the mono backlight
+#define MONO_BACKLIGHT_ENABLED 1
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define MONO_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect
+#define MONO_BACKLIGHT_EFFECT 1
+
+// the default effect speed (0-3)
+#define MONO_BACKLIGHT_EFFECT_SPEED 0
 
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
 // EEPROM usage
 
 // TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC 0x4520
 #define EEPROM_MAGIC_ADDR 34
 // Bump this every time we change what we store
 // This will automatically reset the EEPROM with defaults
@@ -194,9 +210,11 @@
 #define EEPROM_VERSION 0x08
 #define EEPROM_VERSION_ADDR 36
 
-// Dynamic keymap starts after EEPROM version
+// Backlight config starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 37
+#define MONO_BACKLIGHT_CONFIG_EEPROM_ADDR 37
-// Dynamic macro starts after dynamic keymaps (37+(4*5*15*2)) = (37+600)
+// Dynamic keymap starts after  backlight config (37+7)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 44
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 387
+// Dynamic macro starts after dynamic keymaps (44+(4*5*15*2)) = (44+600)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 644
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 380
 #define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/wilba_tech/wt65_a/keymaps/via/rules.mk

@@ -1,71 +1,2 @@
-# project specific files
-SRC =	drivers/issi/is31fl3736.c \
-		drivers/avr/i2c_master.c \
-		keyboards/wilba_tech/wt_mono_backlight.c \
-		keyboards/wilba_tech/wt_main.c
-		
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-
 RAW_ENABLE = yes
 DYNAMIC_KEYMAP_ENABLE = yes

keyboards/wilba_tech/wt65_a/rules.mk

@@ -1,50 +1,21 @@
 # project specific files
 SRC =	drivers/issi/is31fl3736.c \
 		drivers/avr/i2c_master.c \
+		quantum/color.c \
 		keyboards/wilba_tech/wt_mono_backlight.c \
 		keyboards/wilba_tech/wt_main.c
 		
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
 BOOTLOADER = atmel-dfu