ARM split - Add support for dfu-util EE_HANDS flashing (#6543)

* Initial stab at some fake dfu-util-split-left behaviour

* Apply suggestions from code review

Co-Authored-By: fauxpark <[email protected]>

* Clang format fixes

* Fake eeprom init for both left and right hand

.gitignore

@@ -25,7 +25,7 @@ quantum/version.h
 CMakeLists.txt
 cmake-build-debug
 doxygen/
-.DS_STORE
+.DS_Store
 /util/wsl_downloaded
 /util/win_downloaded
 /keyboards/*/Makefile

.vscode/settings.json

@@ -8,10 +8,12 @@
         "**/*.hex": true
     },
     "files.associations": {
-        "*.h": "c",
+      "*.h": "c",
-        "*.c": "c",
+      "*.c": "c",
-        "*.cpp": "cpp",
+      "*.cpp": "cpp",
-        "*.hpp": "cpp",
+      "*.hpp": "cpp",
-        "xstddef": "c"
+      "xstddef": "c",
+      "type_traits": "c",
+      "utility": "c"
     }
 }

Makefile

@@ -371,6 +371,9 @@ define PARSE_KEYBOARD
     # The same if all was specified
     else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all),true)
         $$(eval $$(call PARSE_ALL_KEYMAPS))
+    # List all keymaps for the given keyboard
+    else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,list-keymaps),true)
+        $$(eval $$(call LIST_ALL_KEYMAPS))
     # Try to match the specified keyamp with the list of known keymaps
     else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(KEYMAPS)),true)
         $$(eval $$(call PARSE_KEYMAP,$$(MATCHED_ITEM)))
@@ -407,6 +410,16 @@ endef
 #     endif
 # endef
 
+# Prints a list of all known keymaps for the given keyboard
+define LIST_ALL_KEYMAPS
+    COMMAND_true_LIST_KEYMAPS := \
+        printf "$$(KEYMAPS)\n";
+    COMMAND_false_LIST_KEYMAPS := \
+        printf "$$(MSG_AVAILABLE_KEYMAPS)\n"; \
+        printf "$$(KEYMAPS)\n";
+    COMMANDS += LIST_KEYMAPS
+endef
+
 # $1 Keymap
 # This is the meat of compiling a keyboard, when entering this, everything is known
 # keyboard, subproject, and keymap

bin/qmk

@@ -4,10 +4,8 @@
 import os
 import subprocess
 import sys
-from glob import glob
-from time import strftime
-from importlib import import_module
 from importlib.util import find_spec
+from time import strftime
 
 # Add the QMK python libs to our path
 script_dir = os.path.dirname(os.path.realpath(__file__))
@@ -15,12 +13,8 @@ qmk_dir = os.path.abspath(os.path.join(script_dir, '..'))
 python_lib_dir = os.path.abspath(os.path.join(qmk_dir, 'lib', 'python'))
 sys.path.append(python_lib_dir)
 
-# Change to the root of our checkout
-os.environ['ORIG_CWD'] = os.getcwd()
-os.chdir(qmk_dir)
-
 # Make sure our modules have been setup
-with open('requirements.txt', 'r') as fd:
+with open(os.path.join(qmk_dir, 'requirements.txt'), 'r') as fd:
     for line in fd.readlines():
         line = line.strip().replace('<', '=').replace('>', '=')
 
@@ -32,72 +26,58 @@ with open('requirements.txt', 'r') as fd:
 
         module = line.split('=')[0] if '=' in line else line
         if not find_spec(module):
-            print('Your QMK build environment is not fully setup!\n')
+            print('Could not find module %s!', module)
-            print('Please run `./util/qmk_install.sh` to setup QMK.')
+            print('Please run `pip3 install -r requirements.txt` to install the python dependencies.')
             exit(255)
 
 # Figure out our version
+# TODO(skullydazed/anyone): Find a method that doesn't involve git. This is slow in docker and on windows.
 command = ['git', 'describe', '--abbrev=6', '--dirty', '--always', '--tags']
-result = subprocess.run(command, universal_newlines=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+result = subprocess.run(command, universal_newlines=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
 
 if result.returncode == 0:
-    os.environ['QMK_VERSION'] = 'QMK ' + result.stdout.strip()
+    os.environ['QMK_VERSION'] = result.stdout.strip()
 else:
-    os.environ['QMK_VERSION'] = 'QMK ' + strftime('%Y-%m-%d-%H:%M:%S')
+    os.environ['QMK_VERSION'] = 'nogit-' + strftime('%Y-%m-%d-%H:%M:%S') + '-dirty'
 
 # Setup the CLI
 import milc
+
 milc.EMOJI_LOGLEVELS['INFO'] = '{fg_blue}Ψ{style_reset_all}'
 
-# If we were invoked as `qmk <cmd>` massage sys.argv into `qmk-<cmd>`.
-# This means we can't accept arguments to the qmk script itself.
-script_name = os.path.basename(sys.argv[0])
-if script_name == 'qmk':
-    if len(sys.argv) == 1:
-        milc.cli.log.error('No subcommand specified!\n')
 
-    if len(sys.argv) == 1 or sys.argv[1] in ['-h', '--help']:
+@milc.cli.entrypoint('QMK Helper Script')
-        milc.cli.echo('usage: qmk <subcommand> [...]')
+def qmk_main(cli):
-        milc.cli.echo('\nsubcommands:')
+    """The function that gets run when no subcommand is provided.
-        subcommands = glob(os.path.join(qmk_dir, 'bin', 'qmk-*'))
+    """
-        for subcommand in sorted(subcommands):
+    cli.print_help()
-            subcommand = os.path.basename(subcommand).split('-', 1)[1]
-            milc.cli.echo('\t%s', subcommand)
-        milc.cli.echo('\nqmk <subcommand> --help for more information')
-        exit(1)
 
-    if sys.argv[1] in ['-V', '--version']:
-        milc.cli.echo(os.environ['QMK_VERSION'])
-        exit(0)
 
-    sys.argv[0] = script_name = '-'.join((script_name, sys.argv[1]))
+def main():
-    del sys.argv[1]
+    """Setup our environment and then call the CLI entrypoint.
+    """
+    # Change to the root of our checkout
+    os.environ['ORIG_CWD'] = os.getcwd()
+    os.chdir(qmk_dir)
 
-# Look for which module to import
+    # Import the subcommands
-if script_name == 'qmk':
+    import qmk.cli
-    milc.cli.print_help()
-    exit(0)
-elif not script_name.startswith('qmk-'):
-    milc.cli.log.error('Invalid symlink, must start with "qmk-": %s', script_name)
-else:
-    subcommand = script_name.replace('-', '.').replace('_', '.').split('.')
-    subcommand.insert(1, 'cli')
-    subcommand = '.'.join(subcommand)
 
-    try:
+    # Execute
-        import_module(subcommand)
-    except ModuleNotFoundError as e:
-        if e.__class__.__name__ != subcommand:
-            raise
-
-        milc.cli.log.error('Invalid subcommand! Could not import %s.', subcommand)
-        exit(1)
-
-if __name__ == '__main__':
     return_code = milc.cli()
+
     if return_code is False:
         exit(1)
-    elif return_code is not True and isinstance(return_code, int) and return_code < 256:
+
+    elif return_code is not True and isinstance(return_code, int):
+        if return_code < 0 or return_code > 255:
+            milc.cli.log.error('Invalid return_code: %d', return_code)
+            exit(255)
+
         exit(return_code)
-    else:
+
-        exit(0)
+    exit(0)
+
+
+if __name__ == '__main__':
+    main()

bin/qmk-compile-json

@@ -1 +0,0 @@
-qmk

bin/qmk-doctor

@@ -1 +0,0 @@
-qmk

bin/qmk-hello

@@ -1 +0,0 @@
-qmk

bin/qmk-json-keymap

@@ -1 +0,0 @@
-qmk

build_json.mk

@@ -23,5 +23,5 @@ endif
 
 # Generate the keymap.c
 ifneq ("$(KEYMAP_JSON)","")
-    _ = $(shell test -e $(KEYMAP_C) || bin/qmk-json-keymap $(KEYMAP_JSON) -o $(KEYMAP_C))
+    _ = $(shell test -e $(KEYMAP_C) || bin/qmk json-keymap $(KEYMAP_JSON) -o $(KEYMAP_C))
 endif

docs/_summary.md

@@ -9,6 +9,7 @@
 * [QMK Basics](README.md)
   * [QMK Introduction](getting_started_introduction.md)
   * [QMK CLI](cli.md)
+  * [QMK CLI Config](cli_configuration.md)
   * [Contributing to QMK](contributing.md)
   * [How to Use Github](getting_started_github.md)
   * [Getting Help](getting_started_getting_help.md)
@@ -48,7 +49,7 @@
   * [Useful Functions](ref_functions.md)
   * [Configurator Support](reference_configurator_support.md)
   * [info.json Format](reference_info_json.md)
-  * [Python Development](python_development.md)
+  * [Python CLI Development](cli_development.md)
 
 * [Features](features.md)
   * [Basic Keycodes](keycodes_basic.md)

docs/breaking_changes.md

@@ -14,7 +14,7 @@ The next Breaking Change is scheduled for Nov 29.
 
 ### Important Dates
 
-* [ ] 2019 Oct 04 - `future` is created. It will be rebased weekly.
+* [x] 2019 Sep 21 - `future` is created. It will be rebased weekly.
 * [ ] 2019 Nov 01 - `future` closed to new PR's.
 * [ ] 2019 Nov 01 - Call for testers.
 * [ ] 2019 Nov 27 - `master` is locked, no PR's merged.
@@ -51,7 +51,9 @@ git rebase master
 git push --force
 ```
 
-## 8 Weeks Before Merge
+## Creating the `future` branch
+
+This happens immediately after the previous `future` branch is merged.
 
 * `qmk_firmware` git commands
     * [ ] `git checkout master`
@@ -65,9 +67,6 @@ git push --force
     * [ ] `git tag <next_version>` # Prevent the breakpoint tag from confusing version incrementing
     * [ ] `git push origin future`
     * [ ] `git push --tags`
-* GitHub Actions
-    * [ ] Switch all [breaking_change PR's](https://github.com/qmk/qmk_firmware/pulls?utf8=%E2%9C%93&q=is%3Apr+is%3Aopen+label%3Abreaking_change) to `future`
-    * [ ] Any that have a ChangeLog entry may be merged immediately.
 
 ## 4 Weeks Before Merge
 

docs/cli.md

@@ -4,22 +4,70 @@ This page describes how to setup and use the QMK CLI.
 
 # Overview
 
-The QMK CLI makes building and working with QMK keyboards easier. We have provided a number of commands to help you work with QMK:
+The QMK CLI makes building and working with QMK keyboards easier. We have provided a number of commands to simplify and streamline tasks such as obtaining and compiling the QMK firmware, creating keymaps, and more.
 
-* `qmk compile`
+* [Global CLI](#global-cli)
-* `qmk doctor`
+* [Local CLI](#local-cli)
+* [CLI Commands](#cli-commands)
 
-# Setup
+# Requirements
 
-Simply add the `qmk_firmware/bin` directory to your `PATH`. You can run the `qmk` commands from any directory.
+The CLI requires Python 3.5 or greater. We try to keep the number of requirements small but you will also need to install the packages listed in [`requirements.txt`](https://github.com/qmk/qmk_firmware/blob/master/requirements.txt).
+
+# Global CLI
+
+QMK provides an installable CLI that can be used to setup your QMK build environment, work with QMK, and which makes working with multiple copies of `qmk_firmware` easier. We recommend installing and updating this periodically.
+
+## Install Using Homebrew (macOS, some Linux)
+
+If you have installed [Homebrew](https://brew.sh) you can tap and install QMK:
 
 ```
-export PATH=$PATH:$HOME/qmk_firmware/bin
+brew tap qmk/qmk
+brew install qmk
+export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
+qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
 ```
 
-You may want to add this to your `.profile`, `.bash_profile`, `.zsh_profile`, or other shell startup scripts.
+## Install Using easy_install or pip
 
-# Commands
+If your system is not listed above you can install QMK manually. First ensure that you have python 3.5 (or later) installed and have installed pip. Then install QMK with this command:
+
+```
+pip3 install qmk
+export QMK_HOME='~/qmk_firmware' # Optional, set the location for `qmk_firmware`
+qmk setup  # This will clone `qmk/qmk_firmware` and optionally set up your build environment
+```
+
+## Packaging For Other Operating Systems
+
+We are looking for people to create and maintain a `qmk` package for more operating systems. If you would like to create a package for your OS please follow these guidelines:
+
+* Follow best practices for your OS when they conflict with these guidelines
+    * Documment why in a comment when you do deviate
+* Install using a virtualenv
+* Instruct the user to set the environment variable `QMK_HOME` to have the firmware source checked out somewhere other than `~/qmk_firmware`.
+
+# Local CLI
+
+If you do not want to use the global CLI there is a local CLI bundled with `qmk_firmware`. You can find it in `qmk_firmware/bin/qmk`. You can run the `qmk` command from any directory and it will always operate on that copy of `qmk_firmware`.
+
+**Example**:
+
+```
+$ ~/qmk_firmware/bin/qmk hello
+Ψ Hello, World!
+```
+
+## Local CLI Limitations
+
+There are some limitations to the local CLI compared to the global CLI:
+
+* The local CLI does not support `qmk setup` or `qmk clone`
+* The local CLI always operates on the same `qmk_firmware` tree, even if you have multiple repositories cloned.
+* The local CLI does not run in a virtualenv, so it's possible that dependencies will conflict
+
+# CLI Commands
 
 ## `qmk compile`
 
@@ -46,3 +94,53 @@ This command formats C code using clang-format. Run it with no arguments to form
 ```
 qmk cformat [file1] [file2] [...] [fileN]
 ```
+
+## `qmk config`
+
+This command lets you configure the behavior of QMK. For the full `qmk config` documentation see [CLI Configuration](cli_configuration.md).
+
+**Usage**:
+
+```
+qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
+```
+
+## `qmk doctor`
+
+This command examines your environment and alerts you to potential build or flash problems.
+
+**Usage**:
+
+```
+qmk doctor
+```
+
+## `qmk new-keymap`
+
+This command creates a new keymap based on a keyboard's existing default keymap.
+
+**Usage**:
+
+```
+qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
+```
+
+## `qmk pyformat`
+
+This command formats python code in `qmk_firmware`.
+
+**Usage**:
+
+```
+qmk pyformat
+```
+
+## `qmk pytest`
+
+This command runs the python test suite. If you make changes to python code you should ensure this runs successfully.
+
+**Usage**:
+
+```
+qmk pytest
+```

docs/cli_configuration.md

@@ -0,0 +1,121 @@
+# QMK CLI Configuration
+
+This document explains how `qmk config` works.
+
+# Introduction
+
+Configuration for QMK CLI is a key/value system. Each key consists of a subcommand and an argument name separated by a period. This allows for a straightforward and direct translation between config keys and the arguments they set.
+
+## Simple Example
+
+As an example let's look at the command `qmk compile --keyboard clueboard/66/rev4 --keymap default`.
+
+There are two command line arguments that could be read from configuration instead:
+
+* `compile.keyboard`
+* `compile.keymap`
+
+Let's set these now:
+
+```
+$ qmk config compile.keyboard=clueboard/66/rev4 compile.keymap=default
+compile.keyboard: None -> clueboard/66/rev4
+compile.keymap: None -> default
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+Now I can run `qmk compile` without specifying my keyboard and keymap each time.
+
+## Setting User Defaults
+
+Sometimes you want to share a setting between multiple commands. For example, multiple commands take the argument `--keyboard`. Rather than setting this value for every command you can set a user value which will be used by any command that takes that argument.
+
+Example:
+
+```
+$ qmk config user.keyboard=clueboard/66/rev4 user.keymap=default
+user.keyboard: None -> clueboard/66/rev4
+user.keymap: None -> default
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+# CLI Documentation (`qmk config`)
+
+The `qmk config` command is used to interact with the underlying configuration. When run with no argument it shows the current configuration. When arguments are supplied they are assumed to be configuration tokens, which are strings containing no spaces with the following form:
+
+    <subcommand|general|default>[.<key>][=<value>]
+
+## Setting Configuration Values
+
+You can set configuration values by putting an equal sign (=) into your config key. The key must always be the full `<section>.<key>` form.
+
+Example:
+
+```
+$ qmk config default.keymap=default
+default.keymap: None -> default
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+## Reading Configuration Values
+
+You can read configuration values for the entire configuration, a single key, or for an entire section. You can also specify multiple keys to display more than one value.
+
+### Entire Configuration Example
+
+    qmk config
+
+### Whole Section Example
+
+    qmk config compile
+
+### Single Key Example
+
+    qmk config compile.keyboard
+
+### Multiple Keys Example
+
+    qmk config user compile.keyboard compile.keymap
+
+## Deleting Configuration Values
+
+You can delete a configuration value by setting it to the special string `None`.
+
+Example:
+
+```
+$ qmk config default.keymap=None
+default.keymap: default -> None
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+## Multiple Operations
+
+You can combine multiple read and write operations into a single command. They will be executed and displayed in order:
+
+```
+$ qmk config compile default.keymap=default compile.keymap=None
+compile.keymap=skully
+compile.keyboard=clueboard/66_hotswap/gen1
+default.keymap: None -> default
+compile.keymap: skully -> None
+Ψ Wrote configuration to '/Users/example/Library/Application Support/qmk/qmk.ini'
+```
+
+# User Configuration Options
+
+| Key | Default Value | Description |
+|-----|---------------|-------------|
+| user.keyboard | None | The keyboard path (Example: `clueboard/66/rev4`) |
+| user.keymap | None | The keymap name (Example: `default`) |
+| user.name | None | The user's github username. |
+
+# All Configuration Options
+
+| Key | Default Value | Description |
+|-----|---------------|-------------|
+| compile.keyboard | None | The keyboard path (Example: `clueboard/66/rev4`) |
+| compile.keymap | None | The keymap name (Example: `default`) |
+| hello.name | None | The name to greet when run. |
+| new_keyboard.keyboard | None | The keyboard path (Example: `clueboard/66/rev4`) |
+| new_keyboard.keymap | None | The keymap name (Example: `default`) |

docs/cli_development.md

@@ -0,0 +1,175 @@
+# QMK CLI Development
+
+This document has useful information for developers wishing to write new `qmk` subcommands.
+
+# Overview
+
+The QMK CLI operates using the subcommand pattern made famous by git. The main `qmk` script is simply there to setup the environment and pick the correct entrypoint to run. Each subcommand is a self-contained module with an entrypoint (decorated by `@cli.subcommand()`) that performs some action and returns a shell returncode, or None.
+
+# Subcommands
+
+[MILC](https://github.com/clueboard/milc) is the CLI framework `qmk` uses to handle argument parsing, configuration, logging, and many other features. It lets you focus on writing your tool without wasting your time writing glue code.
+
+Subcommands in the local CLI are always found in `qmk_firmware/lib/python/qmk/cli`.
+
+Let's start by looking at an example subcommand. This is `lib/python/qmk/cli/hello.py`:
+
+```python
+"""QMK Python Hello World
+
+This is an example QMK CLI script.
+"""
+from milc import cli
+
+
+@cli.argument('-n', '--name', default='World', help='Name to greet.')
+@cli.subcommand('QMK Hello World.')
+def hello(cli):
+    """Log a friendly greeting.
+    """
+    cli.log.info('Hello, %s!', cli.config.hello.name)
+```
+
+First we import the `cli` object from `milc`. This is how we interact with the user and control the script's behavior. We use `@cli.argument()` to define a command line flag, `--name`. This also creates a configuration variable named `hello.name` (and the corresponding `user.name`) which the user can set so they don't have to specify the argument. The `cli.subcommand()` decorator designates this function as a subcommand. The name of the subcommand will be taken from the name of the function.
+
+Once inside our function we find a typical "Hello, World!" program. We use `cli.log` to access the underlying [Logger Object](https://docs.python.org/3.5/library/logging.html#logger-objects), whose behavior is user controllable. We also access the value for name supplied by the user as `cli.config.hello.name`. The value for `cli.config.hello.name` will be determined by looking at the `--name` argument supplied by the user, if not provided it will use the value in the `qmk.ini` config file, and if neither of those is provided it will fall back to the default supplied in the `cli.argument()` decorator.
+
+# User Interaction
+
+MILC and the QMK CLI have several nice tools for interacting with the user. Using these standard tools will allow you to colorize your text for easier interactions, and allow the user to control when and how that information is displayed and stored.
+
+## Printing Text
+
+There are two main methods for outputting text in a subcommand- `cli.log` and `cli.echo()`. They operate in similar ways but you should prefer to use `cli.log.info()` for most general purpose printing.
+
+You can use special tokens to colorize your text, to make it easier to understand the output of your program. See [Colorizing Text](#colorizing-text) below.
+
+Both of these methods support built-in string formatting using python's [printf style string format operations](https://docs.python.org/3.5/library/stdtypes.html#old-string-formatting). You can use tokens such as `%s` and `%d` within your text strings then pass the values as arguments. See our Hello, World program above for an example.
+
+You should never use the format operator (`%`) directly, always pass values as arguments.
+
+### Logging (`cli.log`)
+
+The `cli.log` object gives you access to a [Logger Object](https://docs.python.org/3.5/library/logging.html#logger-objects). We have configured our log output to show the user a nice emoji for each log level (or the log level name if their terminal does not support unicode.) This way the user can tell at a glance which messages are most important when something goes wrong.
+
+The default log level is `INFO`. If the user runs `qmk -v <subcommand>` the default log level will be set to `DEBUG`.
+
+| Function | Emoji |
+|----------|-------|
+| cli.log.critical | `{bg_red}{fg_white}¬_¬{style_reset_all}` |
+| cli.log.error | `{fg_red}☒{style_reset_all}` |
+| cli.log.warning | `{fg_yellow}⚠{style_reset_all}` |
+| cli.log.info | `{fg_blue}Ψ{style_reset_all}` |
+| cli.log.debug | `{fg_cyan}☐{style_reset_all}` |
+| cli.log.notset | `{style_reset_all}¯\\_(o_o)_/¯` |
+
+### Printing (`cli.echo`)
+
+Sometimes you simply need to print text outside of the log system. This is appropriate if you are outputting fixed data or writing out something that should never be logged. Most of the time you should prefer `cli.log.info()` over `cli.echo`.
+
+### Colorizing Text
+
+You can colorize the output of your text by including color tokens within text. Use color to highlight, not to convey information. Remember that the user can disable color, and your subcommand should still be usable if they do.
+
+You should generally avoid setting the background color, unless it's integral to what you are doing. Remember that users have a lot of preferences when it comes to their terminal color, so you should pick colors that work well against both black and white backgrounds.
+
+Colors prefixed with 'fg' will affect the foreground (text) color. Colors prefixed with 'bg' will affect the background color.
+
+| Color | Background | Extended Background | Foreground | Extended Foreground|
+|-------|------------|---------------------|------------|--------------------|
+| Black | {bg_black} | {bg_lightblack_ex} | {fg_black} | {fg_lightblack_ex} |
+| Blue | {bg_blue} | {bg_lightblue_ex} | {fg_blue} | {fg_lightblue_ex} |
+| Cyan | {bg_cyan} | {bg_lightcyan_ex} | {fg_cyan} | {fg_lightcyan_ex} |
+| Green | {bg_green} | {bg_lightgreen_ex} | {fg_green} | {fg_lightgreen_ex} |
+| Magenta | {bg_magenta} | {bg_lightmagenta_ex} | {fg_magenta} | {fg_lightmagenta_ex} |
+| Red | {bg_red} | {bg_lightred_ex} | {fg_red} | {fg_lightred_ex} |
+| White | {bg_white} | {bg_lightwhite_ex} | {fg_white} | {fg_lightwhite_ex} |
+| Yellow | {bg_yellow} | {bg_lightyellow_ex} | {fg_yellow} | {fg_lightyellow_ex} |
+
+There are also control sequences that can be used to change the behavior of
+ANSI output:
+
+| Control Sequences | Description |
+|-------------------|-------------|
+| {style_bright} | Make the text brighter |
+| {style_dim} | Make the text dimmer |
+| {style_normal} | Make the text normal (neither `{style_bright}` nor `{style_dim}`) |
+| {style_reset_all} | Reset all text attributes to default. (This is automatically added to the end of every string.) |
+| {bg_reset} | Reset the background color to the user's default |
+| {fg_reset} | Reset the foreground color to the user's default |
+
+# Arguments and Configuration
+
+QMK handles the details of argument parsing and configuration for you. When you add a new argument it is automatically incorporated into the config tree based on your subcommand's name and the long name of the argument. You can access this configuration in `cli.config`, using either attribute-style access (`cli.config.<subcommand>.<argument>`) or dictionary-style access (`cli.config['<subcommand>']['<argument>']`).
+
+Under the hood QMK uses [ConfigParser](https://docs.python.org/3/library/configparser.html) to store configurations. This gives us an easy and straightforward way to represent the configuration in a human-editable way. We have wrapped access to this configuration to provide some nicities that ConfigParser does not normally have.
+
+## Reading Configuration Values
+
+You can interact with `cli.config` in all the ways you'd normally expect. For example the `qmk compile` command gets the keyboard name from `cli.config.compile.keyboard`. It does not need to know whether that value came from the command line, an environment variable, or the configuration file.
+
+Iteration is also supported:
+
+```
+for section in cli.config:
+    for key in cli.config[section]:
+        cli.log.info('%s.%s: %s', section, key, cli.config[section][key])
+```
+
+## Setting Configuration Values
+
+You can set configuration values in the usual ways.
+
+Dictionary style:
+
+```
+cli.config['<section>']['<key>'] = <value>
+```
+
+Attribute style:
+
+```
+cli.config.<section>.<key> = <value>
+```
+
+## Deleting Configuration Values
+
+You can delete configuration values in the usual ways.
+
+Dictionary style:
+
+```
+del(cli.config['<section>']['<key>'])
+```
+
+Attribute style:
+
+```
+del(cli.config.<section>.<key>)
+```
+
+## Writing The Configuration File
+
+The configuration is not written out when it is changed. Most commands do not need to do this. We prefer to have the user change their configuration deliberitely using `qmk config`.
+
+You can use `cli.save_config()` to write out the configuration.
+
+## Excluding Arguments From Configuration
+
+Some arguments should not be propagated to the configuration file. These can be excluded by adding `arg_only=True` when creating the argument.
+
+Example:
+
+```
+@cli.argument('-o', '--output', arg_only=True, help='File to write to')
+@cli.argument('filename', arg_only=True, help='Configurator JSON file')
+@cli.subcommand('Create a keymap.c from a QMK Configurator export.')
+def json_keymap(cli):
+    pass
+```
+
+You will only be able to access these arguments using `cli.args`. For example:
+
+```
+cli.log.info('Reading from %s and writing to %s', cli.args.filename, cli.args.output)
+```

docs/config_options.md

@@ -224,6 +224,7 @@ There are a few different ways to set handedness for split keyboards (listed in
 2. Set `EE_HANDS` and flash `eeprom-lefthand.eep`/`eeprom-righthand.eep` to each half
    * For boards with DFU bootloader you can use `:dfu-split-left`/`:dfu-split-right` to flash these EEPROM files
    * For boards with Caterina bootloader (like stock Pro Micros), use `:avrdude-split-left`/`:avrdude-split-right`
+   * For boards with ARM DFU bootloader (like Proton C), use `:dfu-util-split-left`/`:dfu-util-split-right`
 3. Set `MASTER_RIGHT`: Half that is plugged into the USB port is determined to be the master and right half (inverse of the default)
 4. Default: The side that is plugged into the USB port is the master half and is assumed to be the left half. The slave side is the right half
 

docs/driver_installation_zadig.md

@@ -8,10 +8,14 @@ We recommend the use of the [Zadig](https://zadig.akeo.ie/) utility. If you have
 
 ## Installation
 
-Place your keyboard into the bootloader mode, either by hitting the `RESET` keycode (which may be on a different layer), or by pressing the reset switch usually located on the underside of the board. If your keyboard has neither, try holding Escape, or Space+`B`, as you plug it in (see the [Bootmagic](feature_bootmagic.md) docs for more details).
+Put your keyboard into bootloader mode, either by hitting the `RESET` keycode (which may be on a different layer), or by pressing the reset switch that's usually located on the underside of the board. If your keyboard has neither, try holding Escape or Space+`B` as you plug it in (see the [Bootmagic](feature_bootmagic.md) docs for more details). Some boards use [Command](feature_command.md) instead of Bootmagic; in this case, you can enter bootloader mode by hitting Left Shift+Right Shift+`B` or Left Shift+Right Shift+Escape at any point while the keyboard is plugged in.
-Some keyboards may have specific instructions for entering the bootloader, for example the [Bootmagic Lite](feature_bootmagic.md#bootmagic-lite) key (Escape) might be on a different key, such as Left Control. Refer to the board's README if you are unsure.
+Some keyboards may have specific instructions for entering the bootloader. For example, the [Bootmagic Lite](feature_bootmagic.md#bootmagic-lite) key (default: Escape) might be on a different key, e.g. Left Control; or the magic combination for Command (default: Left Shift+Right Shift) might require you to hold something else, e.g. Left Control+Right Control. Refer to the board's README file if you are unsure.
+
+To put a device in bootloader mode with USBaspLoader, tap the `RESET` button while holding down the `BOOT` button.
+Alternatively, hold `BOOT` while inserting the USB cable.
+
+Zadig will automatically detect the bootloader device. You may sometimes need to check **Options → List All Devices**.
 
-Zadig will automatically detect the bootloader device. You may sometimes need to check **Options -> List All Devices**.
  - For keyboards with Atmel AVR MCUs, the bootloader will be named something similar to `ATm32U4DFU`, and have a Vendor ID of `03EB`.
  - USBasp bootloaders will appear as `USBasp`, with a VID/PID of `16C0:05DC`.
  - AVR keyboards flashed with the QMK-DFU bootloader will be named `<keyboard name> Bootloader` and will also have the VID `03EB`.
@@ -19,7 +23,7 @@ Zadig will automatically detect the bootloader device. You may sometimes need to
 
 !> If Zadig lists one or more devices with the `HidUsb` driver, your keyboard is probably not in bootloader mode. The arrow will be colored orange and you will be asked to confirm modifying a system driver. **Do not** proceed if this is the case!
 
-If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list.
+If the arrow appears green, select the driver, and click **Install Driver**. The `libusb-win32` driver will usually work for AVR, and `WinUSB` for ARM, but if you still cannot flash the board, try installing a different driver from the list. For flashing a USBaspLoader device via command line with msys2, the `libusbk` driver is recommended, otherwise `libusb-win32` will work fine if you are using QMK Toolbox for flashing.
 
 ![Zadig with a bootloader driver correctly installed](https://i.imgur.com/b8VgXzx.png)
 
@@ -39,4 +43,4 @@ Right-click it and hit **Uninstall device**. Make sure to tick **Delete the driv
 
 ![The Device Uninstall dialog, with the "delete driver" checkbox ticked](https://i.imgur.com/aEs2RuA.png)
 
-Click **Action -> Scan for hardware changes**. At this point, you should be able to type again. Double check in Zadig that the keyboard device(s) are using the `HidUsb` driver. If so, you're all done, and your board should be functional again!
+Click **Action → Scan for hardware changes**. At this point, you should be able to type again. Double check in Zadig that the keyboard device(s) are using the `HidUsb` driver. If so, you're all done, and your board should be functional again!

docs/feature_backlight.md

@@ -32,16 +32,18 @@ This feature is distinct from both the [RGB underglow](feature_rgblight.md) and
 
 Hardware PWM is supported according to the following table:
 
-|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|
+|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328P|
-|-------------|-------------|-------------|-------------|---------|
+|-------------|-------------|-------------|-------------|---------|----------|
-|`B5`         |Timer 1      |Timer 1      |             |         |
+|`B1`         |             |             |             |         |Timer 1   |
-|`B6`         |Timer 1      |Timer 1      |             |         |
+|`B2`         |             |             |             |         |Timer 1   |
-|`B7`         |Timer 1      |Timer 1      |Timer 1      |         |
+|`B5`         |Timer 1      |Timer 1      |             |         |          |
-|`C4`         |Timer 3      |             |             |         |
+|`B6`         |Timer 1      |Timer 1      |             |         |          |
-|`C5`         |Timer 3      |             |Timer 1      |         |
+|`B7`         |Timer 1      |Timer 1      |Timer 1      |         |          |
-|`C6`         |Timer 3      |Timer 3      |Timer 1      |         |
+|`C4`         |Timer 3      |             |             |         |          |
-|`D4`         |             |             |             |Timer 1  |
+|`C5`         |Timer 3      |             |Timer 1      |         |          |
-|`D5`         |             |             |             |Timer 1  |
+|`C6`         |Timer 3      |Timer 3      |Timer 1      |         |          |
+|`D4`         |             |             |             |Timer 1  |          |
+|`D5`         |             |             |             |Timer 1  |          |
 
 All other pins will use software PWM. If the [Audio](feature_audio.md) feature is disabled or only using one timer, the backlight PWM can be triggered by a hardware timer:
 

docs/feature_bootmagic.md

@@ -34,6 +34,8 @@ Hold down the Bootmagic key (Space by default) and the desired hotkey while plug
 |`X`               |Toggle key matrix debugging                  |
 |`K`               |Toggle keyboard debugging                    |
 |`M`               |Toggle mouse debugging                       |
+|`L`               |Set "Left Hand" for EE_HANDS handedness      |
+|`R`               |Set "Right Hand" for EE_HANDS handedness     |
 |Backspace         |Clear the EEPROM                             |
 |Caps Lock         |Toggle treating Caps Lock as Left Control    |
 |Left Control      |Toggle swapping Caps Lock and Left Control   |
@@ -83,6 +85,8 @@ Hold down the Bootmagic key (Space by default) and the desired hotkey while plug
 |`MAGIC_UNSWAP_LCTL_LGUI`          |         |Unswap Left Control and Left GUI          |
 |`MAGIC_SWAP_RCTL_RGUI`            |         |Swap Right Control and Right GUI          |
 |`MAGIC_UNSWAP_RCTL_RGUI`          |         |Unswap Right Control and Right GUI        |
+|`MAGIC_EE_HANDS_LEFT`             |         |Set "Left Hand" for EE_HANDS handedness   |
+|`MAGIC_EE_HANDS_RIGHT`            |         |Set "Right Hand" for EE_HANDS handedness  |
 
 ## Configuration
 
@@ -98,6 +102,8 @@ If you would like to change the hotkey assignments for Bootmagic, `#define` thes
 |`BOOTMAGIC_KEY_DEBUG_MATRIX`            |`KC_X`       |Toggle matrix debugging                            |
 |`BOOTMAGIC_KEY_DEBUG_KEYBOARD`          |`KC_K`       |Toggle keyboard debugging                          |
 |`BOOTMAGIC_KEY_DEBUG_MOUSE`             |`KC_M`       |Toggle mouse debugging                             |
+|`BOOTMAGIC_KEY_EE_HANDS_LEFT`           |`KC_L`       |Set "Left Hand" for EE_HANDS handedness            |
+|`BOOTMAGIC_KEY_EE_HANDS_RIGHT`          |`KC_R`       |Set "Right Hand" for EE_HANDS handedness           |
 |`BOOTMAGIC_KEY_SWAP_CONTROL_CAPSLOCK`   |`KC_LCTRL`   |Swap Left Control and Caps Lock                    |
 |`BOOTMAGIC_KEY_CAPSLOCK_TO_CONTROL`     |`KC_CAPSLOCK`|Toggle treating Caps Lock as Left Control          |
 |`BOOTMAGIC_KEY_SWAP_LALT_LGUI`          |`KC_LALT`    |Toggle swapping Left Alt and Left GUI (for macOS)  |

docs/feature_split_keyboard.md

@@ -96,6 +96,8 @@ However, you'll have to flash the EEPROM files for the correct hand to each cont
 * `:avrdude-split-right`
 * `:dfu-split-left`
 * `:dfu-split-right`
+* `:dfu-util-split-left`
+* `:dfu-util-split-right`
 
 This setting is not changed when re-initializing the EEPROM using the `EEP_RST` key, or using the `eeconfig_init()` function.  However, if you reset the EEPROM outside of the firmware's built in options (such as flashing a file that overwrites the `EEPROM`, like how the [QMK Toolbox]()'s "Reset EEPROM" button works), you'll need to re-flash the controller with the `EEPROM` files. 
 

docs/feature_tap_dance.md

@@ -30,7 +30,9 @@ Next, you will want to define some tap-dance keys, which is easiest to do with t
 After this, you'll want to use the `tap_dance_actions` array to specify what actions shall be taken when a tap-dance key is in action. Currently, there are five possible options:
 
 * `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. When the key is held, the appropriate keycode is registered: `kc1` when pressed and held, `kc2` when tapped once, then pressed and held.
-* `ACTION_TAP_DANCE_DUAL_ROLE(kc, layer)`: Sends the `kc` keycode when tapped once, or moves to `layer`. (this functions like the `TO` layer keycode).
+* `ACTION_TAP_DANCE_LAYER_MOVE(kc, layer)`: Sends the `kc` keycode when tapped once, or moves to `layer`. (this functions like the `TO` layer keycode).
+    * This is the same as `ACTION_TAP_DANCE_DUAL_ROLE`, but renamed to something that is clearer about its functionality.  Both names will work.
+* `ACTION_TAP_DANCE_LAYER_TOGGLE(kc, layer)`: Sends the `kc` keycode when tapped once, or toggles the state of `layer`. (this functions like the `TG` layer keycode).
 * `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action.
 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function when the dance action finishes (like the previous option), and the last function when the tap dance action resets.
 * `ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`: This functions identically to the `ACTION_TAP_DANCE_FN_ADVANCED` function, but uses a custom tapping term for it, instead of the predefined `TAPPING_TERM`.

docs/flashing.md

@@ -10,11 +10,17 @@ Atmel's DFU bootloader comes on all atmega32u4 chips by default, and is used by
 
 To ensure compatibility with the DFU bootloader, make sure this block is present your `rules.mk` (optionally with `lufa-dfu` or `qmk-dfu` instead):
 
-    # Bootloader
+```make
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+# Bootloader selection
-    #     different sizes, comment this out, and the correct address will be loaded
+#   Teensy       halfkay
-    #     automatically (+60). See bootloader.mk for all options.
+#   Pro Micro    caterina
-    BOOTLOADER = atmel-dfu
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+```
 
 Compatible flashers:
 
@@ -64,11 +70,17 @@ Arduino boards and their clones use the [Caterina bootloader](https://github.com
 
 To ensure compatibility with the Caterina bootloader, make sure this block is present your `rules.mk`:
 
-    # Bootloader
+```make
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+# Bootloader selection
-    #     different sizes, comment this out, and the correct address will be loaded
+#   Teensy       halfkay
-    #     automatically (+60). See bootloader.mk for all options.
+#   Pro Micro    caterina
-    BOOTLOADER = caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+```
 
 Compatible flashers:
 
@@ -100,11 +112,17 @@ Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on al
 
 To ensure compatibility with the Halfkay bootloader, make sure this block is present your `rules.mk`:
 
-    # Bootloader
+```make
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+# Bootloader selection
-    #     different sizes, comment this out, and the correct address will be loaded
+#   Teensy       halfkay
-    #     automatically (+60). See bootloader.mk for all options.
+#   Pro Micro    caterina
-    BOOTLOADER = halfkay
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = halfkay
+```
 
 Compatible flashers:
 
@@ -125,11 +143,17 @@ USBasploader is a bootloader developed by matrixstorm. It is used in some non-US
 
 To ensure compatibility with the USBasploader bootloader, make sure this block is present in your `rules.mk`:
 
-    # Bootloader
+```make
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+# Bootloader selection
-    #     different sizes, comment this out, and the correct address will be loaded
+#   Teensy       halfkay
-    #     automatically (+60). See bootloader.mk for all options.
+#   Pro Micro    caterina
-    BOOTLOADER = USBasp
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = USBasp
+```
 
 Compatible flashers:
 
@@ -150,11 +174,17 @@ BootloadHID is a USB bootloader for AVR microcontrollers. The uploader tool requ
 
 To ensure compatibility with the bootloadHID bootloader, make sure this block is present your `rules.mk`:
 
-    # Bootloader
+```make
-    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+# Bootloader selection
-    #     different sizes, comment this out, and the correct address will be loaded
+#   Teensy       halfkay
-    #     automatically (+60). See bootloader.mk for all options.
+#   Pro Micro    caterina
-    BOOTLOADER = bootloadHID
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = bootloadHID
+```
 
 Compatible flashers:
 
@@ -202,4 +232,6 @@ Flashing sequence:
 There are a number of DFU commands that you can use to flash firmware to a STM32 device:
 
 * `:dfu-util` - The default command for flashing to STM32 devices.
-* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util.
+* `:dfu-util-split-left` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Left Side" EEPROM setting for split keyboards.
+* `:dfu-util-split-right` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Right Side" EEPROM setting for split keyboards.
+* `:st-link-cli` - This allows you to flash the firmware via ST-LINK's CLI utility, rather than dfu-util. 

docs/keycodes.md

@@ -257,35 +257,37 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Bootmagic](feature_bootmagic.md)
 
-|Key                               |Aliases  |Description                         |
+|Key                               |Aliases  |Description                                |
-|----------------------------------|---------|------------------------------------|
+|----------------------------------|---------|-------------------------------------------|
-|`MAGIC_SWAP_CONTROL_CAPSLOCK`     |         |Swap Caps Lock and Left Control     |
+|`MAGIC_SWAP_CONTROL_CAPSLOCK`     |         |Swap Caps Lock and Left Control            |
-|`MAGIC_CAPSLOCK_TO_CONTROL`       |         |Treat Caps Lock as Control          |
+|`MAGIC_CAPSLOCK_TO_CONTROL`       |         |Treat Caps Lock as Control                 |
-|`MAGIC_SWAP_LCTL_LGUI`            |         |Swap Left Control and GUI           |
+|`MAGIC_SWAP_LCTL_LGUI`            |         |Swap Left Control and GUI                  |
-|`MAGIC_SWAP_RCTL_RGUI`            |         |Swap Right Control and GUI          |
+|`MAGIC_SWAP_RCTL_RGUI`            |         |Swap Right Control and GUI                 |
-|`MAGIC_SWAP_LALT_LGUI`            |         |Swap Left Alt and GUI               |
+|`MAGIC_SWAP_LALT_LGUI`            |         |Swap Left Alt and GUI                      |
-|`MAGIC_SWAP_RALT_RGUI`            |         |Swap Right Alt and GUI              |
+|`MAGIC_SWAP_RALT_RGUI`            |         |Swap Right Alt and GUI                     |
-|`MAGIC_NO_GUI`                    |         |Disable the GUI key                 |
+|`MAGIC_NO_GUI`                    |         |Disable the GUI key                        |
-|`MAGIC_SWAP_GRAVE_ESC`            |         |Swap <code>&#96;</code> and Escape  |
+|`MAGIC_SWAP_GRAVE_ESC`            |         |Swap <code>&#96;</code> and Escape         |
-|`MAGIC_SWAP_BACKSLASH_BACKSPACE`  |         |Swap `\` and Backspace              |
+|`MAGIC_SWAP_BACKSLASH_BACKSPACE`  |         |Swap `\` and Backspace                     |
-|`MAGIC_HOST_NKRO`                 |         |Force NKRO on                       |
+|`MAGIC_HOST_NKRO`                 |         |Force NKRO on                              |
-|`MAGIC_SWAP_ALT_GUI`              |`AG_SWAP`|Swap Alt and GUI on both sides      |
+|`MAGIC_SWAP_ALT_GUI`              |`AG_SWAP`|Swap Alt and GUI on both sides             |
 |`MAGIC_SWAP_CTL_GUI`              |`CG_SWAP`|Swap Ctrl and GUI on both sides (for macOS)|
-|`MAGIC_UNSWAP_CONTROL_CAPSLOCK`   |         |Unswap Caps Lock and Left Control   |
+|`MAGIC_UNSWAP_CONTROL_CAPSLOCK`   |         |Unswap Caps Lock and Left Control          |
-|`MAGIC_UNCAPSLOCK_TO_CONTROL`     |         |Stop treating Caps Lock as Control  |
+|`MAGIC_UNCAPSLOCK_TO_CONTROL`     |         |Stop treating Caps Lock as Control         |
-|`MAGIC_UNSWAP_LCTL_LGUI`          |         |Unswap Left Control and GUI         |
+|`MAGIC_UNSWAP_LCTL_LGUI`          |         |Unswap Left Control and GUI                |
-|`MAGIC_UNSWAP_RCTL_RGUI`          |         |Unswap Right Control and GUI        |
+|`MAGIC_UNSWAP_RCTL_RGUI`          |         |Unswap Right Control and GUI               |
-|`MAGIC_UNSWAP_LALT_LGUI`          |         |Unswap Left Alt and GUI             |
+|`MAGIC_UNSWAP_LALT_LGUI`          |         |Unswap Left Alt and GUI                    |
-|`MAGIC_UNSWAP_RALT_RGUI`          |         |Unswap Right Alt and GUI            |
+|`MAGIC_UNSWAP_RALT_RGUI`          |         |Unswap Right Alt and GUI                   |
-|`MAGIC_UNNO_GUI`                  |         |Enable the GUI key                  |
+|`MAGIC_UNNO_GUI`                  |         |Enable the GUI key                         |
-|`MAGIC_UNSWAP_GRAVE_ESC`          |         |Unswap <code>&#96;</code> and Escape|
+|`MAGIC_UNSWAP_GRAVE_ESC`          |         |Unswap <code>&#96;</code> and Escape       |
-|`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|         |Unswap `\` and Backspace            |
+|`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|         |Unswap `\` and Backspace                   |
-|`MAGIC_UNHOST_NKRO`               |         |Force NKRO off                      |
+|`MAGIC_UNHOST_NKRO`               |         |Force NKRO off                             |
-|`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Alt and GUI on both sides    |
+|`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Alt and GUI on both sides           |
-|`MAGIC_UNSWAP_CTL_GUI`            |`CG_NORM`|Unswap Ctrl and GUI on both sides      |
+|`MAGIC_UNSWAP_CTL_GUI`            |`CG_NORM`|Unswap Ctrl and GUI on both sides          |
-|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Alt and GUI swap on both sides  |
+|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Alt and GUI swap on both sides      |
-|`MAGIC_TOGGLE_CTL_GUI`            |`CG_TOGG`|Toggle Ctrl and GUI swap on both sides |
+|`MAGIC_TOGGLE_CTL_GUI`            |`CG_TOGG`|Toggle Ctrl and GUI swap on both sides     |
-|`MAGIC_TOGGLE_NKRO`               |         |Turn NKRO on or off                    |
+|`MAGIC_TOGGLE_NKRO`               |         |Turn NKRO on or off                        |
+|`MAGIC_EE_HANDS_LEFT`             |         |Set "Left Hand" for EE_HANDS handedness    |
+|`MAGIC_EE_HANDS_RIGHT`            |         |Set "Right Hand" for EE_HANDS handedness   |
 
 ## [Bluetooth](feature_bluetooth.md)
 

docs/newbs_flashing.md

@@ -215,7 +215,7 @@ Additionally, if you want to flash multiple boards, use the following command:
 When you're done flashing boards, you'll need to hit Ctrl + C or whatever the correct keystroke is for your operating system to break the loop.
 
 
-## HalfKay
+### HalfKay
 
 For the PJRC devices (Teensy's), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
@@ -248,7 +248,7 @@ Programming.....................................................................
 Booting
 ```
 
-## BootloadHID
+### BootloadHID
 
 For Bootmapper Client(BMC)/bootloadHID/ATmega32A based boards, when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
@@ -284,7 +284,7 @@ Uploading 22016 (0x5600) bytes starting at 0 (0x0)
 0x05580 ... 0x05600
 ```
 
-## STM32 (ARM)
+### STM32 (ARM)
 
 For a majority of ARM boards (including the Proton C, Planck Rev 6, and Preonic Rev 3), when you're ready to compile and flash your firmware, open up your terminal window and run the build command: 
 
@@ -334,6 +334,16 @@ File downloaded successfully
 Transitioning to dfuMANIFEST state
 ```
 
+#### STM32 Commands
+
+There are a number of DFU commands that you can use to flash firmware to a STM32 device:
+
+* `:dfu-util` - The default command for flashing to STM32 devices. 
+* `:dfu-util-wait` - This works like the default command, but it gives you a (configurable) 10 second timeout before it attempts to flash the firmware.  You can use `TIME_DELAY=20` from the command line to change the timeout.
+   * Eg: `make <keyboard>:<keymap>:dfu-util TIME_DELAY=5`
+* `:dfu-util-split-left` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Left Side" EEPROM setting for split keyboards.
+* `:dfu-util-split-right` - This flashes the normal firmware, just like the default option (`:dfu-util`). However, this also configures the "Right Side" EEPROM setting for split keyboards.
+
 ## Test It Out!
 
 Congrats! Your custom firmware has been programmed to your keyboard!

docs/python_development.md

@@ -1,45 +0,0 @@
-# Python Development in QMK
-
-This document gives an overview of how QMK has structured its python code. You should read this before working on any of the python code.
-
-## Script directories
-
-There are two places scripts live in QMK: `qmk_firmware/bin` and `qmk_firmware/util`. You should use `bin` for any python scripts that utilize the `qmk` wrapper. Scripts that are standalone and not run very often live in `util`.
-
-We discourage putting anything into `bin` that does not utilize the `qmk` wrapper. If you think you have a good reason for doing so please talk to us about your use case.
-
-## Python Modules
-
-Most of the QMK python modules can be found in `qmk_firmware/lib/python`. This is the path that we append to `sys.path`.
-
-We have a module hierarchy under that path:
-
-* `qmk_firmware/lib/python`
-    * `milc.py` - The CLI library we use. Will be pulled out into its own module in the future.
-    * `qmk` - Code associated with QMK
-        * `cli` - Modules that will be imported for CLI commands.
-        * `errors.py` - Errors that can be raised within QMK apps
-        * `keymap.py` - Functions for working with keymaps
-
-## CLI Scripts
-
-We have a CLI wrapper that you should utilize for any user facing scripts. We think it's pretty easy to use and it gives you a lot of nice things for free.
-
-To use the wrapper simply place a module into `qmk_firmware/lib/python/qmk/cli`, and create a symlink to `bin/qmk` named after your module. Dashes in command names will be converted into dots so you can use hierarchy to manage commands.
-
-When `qmk` is run it checks to see how it was invoked. If it was invoked as `qmk` the module name is take from `sys.argv[1]`. If it was invoked as `qmk-<module-name>` then everything after the first dash is taken as the module name. Dashes and underscores are converted to dots, and then `qmk.cli` is prepended before the module is imported.
-
-The module uses `@cli.entrypoint()` and `@cli.argument()` decorators to define an entrypoint, which is where execution starts.
-
-## Example CLI Script
-
-We have provided a QMK Hello World script you can use as an example. To run it simply run `qmk hello` or `qmk-hello`. The source code is listed below.
-
-```
-from milc import cli
-
-@cli.argument('-n', '--name', default='World', help='Name to greet.')
-@cli.entrypoint('QMK Python Hello World.')
-def main(cli):
-    cli.echo('Hello, %s!', cli.config.general.name)
-```

docs/redirects.json

@@ -43,6 +43,10 @@
             {
                 "from": "unicode.html",
                 "to": "feature_unicode.html"
+            },
+            {
+                "from": "python_development.html",
+                "to": "cli_development.html"
             }
         ]
 }

drivers/arm/i2c_master.c

@@ -32,6 +32,17 @@
 
 static uint8_t i2c_address;
 
+// ChibiOS uses two initialization structure for v1 and v2/v3 i2c APIs.
+// The F1 series uses the v1 api, which have to initialized this way.
+#ifdef STM32F103xB
+static const I2CConfig i2cconfig = {
+  OPMODE_I2C,
+  400000,
+  FAST_DUTY_CYCLE_2,
+};
+#else
+// This configures the I2C clock to 400khz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
 static const I2CConfig i2cconfig = {
 #ifdef USE_I2CV1
     I2C1_OPMODE,
@@ -41,6 +52,7 @@ static const I2CConfig i2cconfig = {
     STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
 #endif
 };
+#endif
 
 static i2c_status_t chibios_to_qmk(const msg_t* status) {
     switch (*status) {
@@ -60,7 +72,6 @@ __attribute__((weak)) void i2c_init(void) {
     palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT);
 
     chThdSleepMilliseconds(10);
-
 #ifdef USE_I2CV1
     palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
     palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
@@ -68,8 +79,6 @@ __attribute__((weak)) void i2c_init(void) {
     palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
     palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
 #endif
-
-    // i2cInit(); //This is invoked by halInit() so no need to redo it.
 }
 
 i2c_status_t i2c_start(uint8_t address) {

keyboards/1upkeyboards/1up60hse/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/1upkeyboards/1up60hte/rules.mk

@@ -1,6 +1,14 @@
 # MCU name
 MCU = atmega32u4
 
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/1upkeyboards/1up60rgb/rules.mk

@@ -1,45 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   comment out to disable the options.

keyboards/1upkeyboards/super16/rules.mk

@@ -1,62 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-#EXTRAFLAGS += -flto
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/1upkeyboards/sweet16/rules.mk

@@ -1,45 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = caterina
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   comment out to disable the options.

keyboards/2_milk/keymaps/mikethetiger/keymap.c

@@ -0,0 +1,8 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+      [0] = LAYOUT(
+          KC_VOLU,
+          KC_VOLD
+          )
+};

keyboards/2_milk/keymaps/mikethetiger/readme.md

@@ -0,0 +1 @@
+# mikethetiger's keymap for 2% Milk

keyboards/2_milk/keymaps/mikethetiger/rules.mk

@@ -0,0 +1,13 @@
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE  = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE  = yes	# Console for debug(+400)
+COMMAND_ENABLE  = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE  = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE  = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE  = no  # Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE  = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE  = yes # This can be enabled if a ws2812 strip is connected to the expansion port.

keyboards/2_milk/rules.mk

@@ -1,24 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-F_CPU = 16000000
+#   Teensy       halfkay
-
+#   Pro Micro    caterina
-#
+#   Atmel DFU    atmel-dfu
-# LUFA specific
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-# Target architecture (see library "Board Types" documentation).
+#   ATmega32A    bootloadHID
-ARCH = AVR8
+#   ATmega328P   USBasp
-
-# Input clock frequency.
-F_USB = $(F_CPU)
-
-# Bootloader
 BOOTLOADER = caterina
 
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/2key2crawl/rules.mk

@@ -1,18 +1,16 @@
 # MCU name
 MCU = atmega32u2
 
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
-
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/30wer/rules.mk

@@ -1,45 +1,14 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = caterina
 
 # Build Options

keyboards/40percentclub/25/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/40percentclub/4x4/rules.mk

@@ -1,61 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/40percentclub/5x5/rules.mk

@@ -1,62 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/40percentclub/6lit/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/40percentclub/foobar/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/40percentclub/gherkin/rules.mk

@@ -1,62 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/40percentclub/half_n_half/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/40percentclub/i75/promicro/rules.mk

@@ -1,58 +1,12 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096

keyboards/40percentclub/i75/teensy2/rules.mk

@@ -1,58 +1,12 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = halfkay
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096

keyboards/40percentclub/luddite/rules.mk

@@ -1,62 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/40percentclub/mf68/keymaps/mf68_ble/rules.mk

@@ -1,64 +1,6 @@
-# Overrides for Feather 32u4 Bluefruit
+# Processor frequency
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
 F_CPU = 8000000
 
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
-BOOTLOADER = caterina
-
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/40percentclub/mf68/rules.mk

@@ -1,62 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/40percentclub/nano/rules.mk

@@ -1,62 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically

keyboards/40percentclub/nein/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/40percentclub/nori/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/40percentclub/tomato/rules.mk

@@ -1,62 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/40percentclub/ut47/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/4by3/rules.mk

@@ -1,5 +1,15 @@
-MCU 				= atmega32u4
+# MCU name
-BOOTLOADER 			= caterina
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
 
 EXTRAKEY_ENABLE 	= yes
 NKRO_ENABLE 		= yes

keyboards/6ball/rules.mk

@@ -1,49 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = caterina
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in 

keyboards/8pack/rules.mk

@@ -1,48 +1,14 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
 
 # Build Options

keyboards/9key/rules.mk

@@ -1,49 +1,15 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = caterina
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in

keyboards/alps64/rules.mk

@@ -1,13 +1,14 @@
 # MCU name
 MCU = atmega32u2
 
-# Boot Section Size in *bytes*
+# Bootloader selection
-#   Teensy halfKay   512
+#   Teensy       halfkay
-#   Teensy++ halfKay 1024
+#   Pro Micro    caterina
-#   Atmel DFU loader 4096
+#   Atmel DFU    atmel-dfu
-#   LUFA bootloader  4096
+#   LUFA DFU     lufa-dfu
-#   USBaspLoader     2048
+#   QMK DFU      qmk-dfu
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/ares/rules.mk

@@ -15,18 +15,15 @@
 
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
 
-# unsupported features for now
+# Bootloader selection
-NO_SUSPEND_POWER_DOWN = yes
+#   Teensy       halfkay
-
+#   Pro Micro    caterina
-# processor frequency
+#   Atmel DFU    atmel-dfu
-F_CPU = 12000000
+#   LUFA DFU     lufa-dfu
-
+#   QMK DFU      qmk-dfu
-# Bootloader
+#   ATmega32A    bootloadHID
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#   ATmega328P   USBasp
-#     different sizes, comment this out, and the correct address will be loaded 
-#     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = bootloadHID
 
 # build options
@@ -38,11 +35,7 @@ COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
 RGBLIGHT_CUSTOM_DRIVER = yes
-NO_UART = yes
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 SRC += i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/bfake/rules.mk

@@ -15,19 +15,15 @@
 
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
 
-# unsupported features for now
+# Bootloader selection
-NO_UART = yes
+#   Teensy       halfkay
-NO_SUSPEND_POWER_DOWN = yes
+#   Pro Micro    caterina
-
+#   Atmel DFU    atmel-dfu
-# processor frequency
+#   LUFA DFU     lufa-dfu
-F_CPU = 12000000
+#   QMK DFU      qmk-dfu
-
+#   ATmega32A    bootloadHID
-# Bootloader
+#   ATmega328P   USBasp
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
-#     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = bootloadHID
 
 # build options
@@ -45,6 +41,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
 # custom matrix setup
 CUSTOM_MATRIX = yes
 SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/bigseries/rules.mk

@@ -1,45 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   comment out to disable the options.

keyboards/bpiphany/frosty_flake/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/bpiphany/kitten_paw/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-	OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/bpiphany/pegasushoof/info.json

@@ -187,6 +187,101 @@
         {"label":"Down", "x":16.25, "y":5.5},
         {"label":"Right", "x":17.25, "y":5.5}
       ]
+    },
+    "LAYOUT_tkl_jis": {
+      "layout": [
+        {"label":"Esc", "x":0, "y":0},
+        {"label":"F1", "x":2, "y":0},
+        {"label":"F2", "x":3, "y":0},
+        {"label":"F3", "x":4, "y":0},
+        {"label":"F4", "x":5, "y":0},
+        {"label":"F5", "x":6.5, "y":0},
+        {"label":"F6", "x":7.5, "y":0},
+        {"label":"F7", "x":8.5, "y":0},
+        {"label":"F8", "x":9.5, "y":0},
+        {"label":"F9", "x":11, "y":0},
+        {"label":"F10", "x":12, "y":0},
+        {"label":"F11", "x":13, "y":0},
+        {"label":"F12", "x":14, "y":0},
+        {"label":"Print Screen", "x":15.25, "y":0},
+        {"label":"Scroll Lock", "x":16.25, "y":0},
+        {"label":"Pause", "x":17.25, "y":0},
+        {"label":"Half-width/Full-width", "x":0, "y":1.5},
+        {"label":"1", "x":1, "y":1.5},
+        {"label":"2", "x":2, "y":1.5},
+        {"label":"3", "x":3, "y":1.5},
+        {"label":"4", "x":4, "y":1.5},
+        {"label":"5", "x":5, "y":1.5},
+        {"label":"6", "x":6, "y":1.5},
+        {"label":"7", "x":7, "y":1.5},
+        {"label":"8", "x":8, "y":1.5},
+        {"label":"9", "x":9, "y":1.5},
+        {"label":"0", "x":10, "y":1.5},
+        {"label":"-", "x":11, "y":1.5},
+        {"label":"^", "x":12, "y":1.5},
+        {"label":"Yen", "x":13, "y":1.5},
+        {"label":"Backspace", "x":14, "y":1.5},
+        {"label":"Insert", "x":15.25, "y":1.5},
+        {"label":"Home", "x":16.25, "y":1.5},
+        {"label":"Page Up", "x":17.25, "y":1.5},
+        {"label":"Tab", "x":0, "y":2.5, "w":1.5},
+        {"label":"Q", "x":1.5, "y":2.5},
+        {"label":"W", "x":2.5, "y":2.5},
+        {"label":"E", "x":3.5, "y":2.5},
+        {"label":"R", "x":4.5, "y":2.5},
+        {"label":"T", "x":5.5, "y":2.5},
+        {"label":"Y", "x":6.5, "y":2.5},
+        {"label":"U", "x":7.5, "y":2.5},
+        {"label":"I", "x":8.5, "y":2.5},
+        {"label":"O", "x":9.5, "y":2.5},
+        {"label":"P", "x":10.5, "y":2.5},
+        {"label":"@", "x":11.5, "y":2.5},
+        {"label":"[", "x":12.5, "y":2.5},
+        {"label":"Del", "x":15.25, "y":2.5},
+        {"label":"End", "x":16.25, "y":2.5},
+        {"label":"Page Down", "x":17.25, "y":2.5},
+        {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+        {"label":"A", "x":1.75, "y":3.5},
+        {"label":"S", "x":2.75, "y":3.5},
+        {"label":"D", "x":3.75, "y":3.5},
+        {"label":"F", "x":4.75, "y":3.5},
+        {"label":"G", "x":5.75, "y":3.5},
+        {"label":"H", "x":6.75, "y":3.5},
+        {"label":"J", "x":7.75, "y":3.5},
+        {"label":"K", "x":8.75, "y":3.5},
+        {"label":"L", "x":9.75, "y":3.5},
+        {"label":";", "x":10.75, "y":3.5},
+        {"label":":", "x":11.75, "y":3.5},
+        {"label":"]", "x":12.75, "y":3.5},
+        {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2},
+        {"label":"Shift", "x":0, "y":4.5, "w":2.25},
+        {"label":"Z", "x":2.25, "y":4.5},
+        {"label":"X", "x":3.25, "y":4.5},
+        {"label":"C", "x":4.25, "y":4.5},
+        {"label":"V", "x":5.25, "y":4.5},
+        {"label":"B", "x":6.25, "y":4.5},
+        {"label":"N", "x":7.25, "y":4.5},
+        {"label":"M", "x":8.25, "y":4.5},
+        {"label":",", "x":9.25, "y":4.5},
+        {"label":".", "x":10.25, "y":4.5},
+        {"label":"/", "x":11.25, "y":4.5},
+        {"label":"\\", "x":12.25, "y":4.5},
+        {"label":"Shift", "x":13.25, "y":4.5, "w":1.75},
+        {"label":"Up", "x":16.25, "y":4.5},
+        {"label":"Ctrl", "x":0, "y":5.5, "w":1.25},
+        {"label":"GUI", "x":1.25, "y":5.5},
+        {"label":"Alt", "x":2.25, "y":5.5, "w":1.25},
+        {"label":"Muhenkan", "x":3.5, "y":5.5},
+        {"label":"Space", "x":4.5, "y":5.5, "w":4.5},
+        {"label":"Henkan", "x":9, "y":5.5, "w":1.25},
+        {"label":"Kana", "x":10.25, "y":5.5, "w":1.25},
+        {"label":"Alt", "x":11.5, "y":5.5, "w":1.25},
+        {"label":"Fn", "x":12.75, "y":5.5},
+        {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25},
+        {"label":"Left", "x":15.25, "y":5.5},
+        {"label":"Down", "x":16.25, "y":5.5},
+        {"label":"Right", "x":17.25, "y":5.5}
+      ]
     }
   }
 }

keyboards/bpiphany/pegasushoof/rules.mk

@@ -1,42 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-BOOTLOADER=atmel-dfu
 
 # Build Options
 #   change yes to no to disable

keyboards/bpiphany/tiger_lily/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/bpiphany/unloved_bastard/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = atmega32u2
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = atmel-dfu
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/ckeys/thedora/info.json

@@ -6,11 +6,33 @@
   "height": 4,
   "layouts": {
     "LAYOUT_ortho_4x5": {
-      "key_count": 20,
+      "key_count": 21,
-      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x": 4, "y":0},
+      "layout": [
-                 {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1},
+        {"label":"k00", "x":1, "y":0},
-                 {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2},
+        {"label":"k01", "x":2, "y":0},
-                 {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}]
+        {"label":"k02", "x":3, "y":0},
+        {"label":"k03", "x":4, "y":0},
+        {"label":"k04", "x":5, "y":0},
+        {"label":"k05 (Rotary Push)", "x":0, "y":3},
+
+        {"label":"k06", "x":1, "y":1},
+        {"label":"k07", "x":2, "y":1},
+        {"label":"k08", "x":3, "y":1},
+        {"label":"k09", "x":4, "y":1},
+        {"label":"k10", "x":5, "y":1},
+
+        {"label":"k11", "x":1, "y":2},
+        {"label":"k12", "x":2, "y":2},
+        {"label":"k13", "x":3, "y":2},
+        {"label":"k14", "x":4, "y":2},
+        {"label":"k15", "x":5, "y":2},
+
+        {"label":"k16", "x":1, "y":3},
+        {"label":"k17", "x":2, "y":3},
+        {"label":"k18", "x":3, "y":3},
+        {"label":"k19", "x":4, "y":3},
+        {"label":"k20", "x":5, "y":3}
+      ]
     }
   }
 }

keyboards/clueboard/2x1800/rules.mk

@@ -1,11 +1,15 @@
-# MCU details
+# MCU name
 MCU = at90usb1286
-F_CPU = 16000000
-ARCH = AVR8
-F_USB = $(F_CPU)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-OPT_DEFS += -DBOOTLOADER_SIZE=1024
 
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = halfkay
 
 # Build Options
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)

keyboards/clueboard/60/keymaps/yanfali/keymap.c

@@ -1,132 +0,0 @@
-#include QMK_KEYBOARD_H
-
-enum keyboard_layers {
-    _BL,
-    _FL,
-    _CL,
-    _YF
-};
-
-enum custom_keycodes {
-    S_BSKTC = SAFE_RANGE,
-    S_ODEJY,
-    S_RCKBY,
-    S_DOEDR,
-    S_SCALE,
-    S_ONEUP,
-    S_COIN,
-    S_SONIC,
-    S_ZELDA
-};
-
-#ifdef AUDIO_ENABLE
-  float song_basketcase[][2] = SONG(BASKET_CASE);
-  float song_ode_to_joy[][2]  = SONG(ODE_TO_JOY);
-  float song_rock_a_bye_baby[][2]  = SONG(ROCK_A_BYE_BABY);
-  float song_doe_a_deer[][2]  = SONG(DOE_A_DEER);
-  float song_scale[][2]  = SONG(MUSIC_SCALE_SOUND);
-  float song_coin[][2]  = SONG(COIN_SOUND);
-  float song_one_up[][2]  = SONG(ONE_UP_SOUND);
-  float song_sonic_ring[][2]  = SONG(SONIC_RING);
-  float song_zelda_puzzle[][2]  = SONG(ZELDA_PUZZLE);
-#endif
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* Layer 0: Default Layer
-     * ,-----------------------------------------------------------------.
-     * |Esc      |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  `|BSp|
-     * |-----------------------------------------------------------------|
-     * |Tab        |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \|
-     * |-----------------------------------------------------------------|
-     * |MT(CTL, ESC)|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Enter   |
-     * |-----------------------------------------------------------------|
-     * |Shift         |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Fn0|
-     * |-----------------------------------------------------------------'
-     * |Ctrl       |Alt|Gui  |         Space         |Alt  |Gui|Fn |Ctrl |
-     * `-----------------------------------------------------------------'
-     */
-    [_BL] = LAYOUT_all(
-      KC_GESC,KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_GRV, KC_BSPC,\
-      KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,     \
-      MT(MOD_LCTL, KC_ESC),     KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_NUHS,  KC_ENT,  \
-      KC_LSFT,  KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,  KC_RSFT,   MO(_YF), \
-      KC_LCTL,  KC_LALT,  KC_LGUI,                        KC_SPC,                      KC_RALT,  KC_RGUI,  MO(_FL),   KC_RCTL),
-    [_FL] = LAYOUT_all(
-      KC_ESC, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, _______,_______,\
-      _______,   _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,     \
-      _______,     _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  _______, \
-      _______,  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  _______,   MO(_YF), \
-      _______,_______,_______,                        _______,                     _______,  _______,  MO(_FL),   _______),
-    [_CL] = LAYOUT_all(
-      BL_STEP,S_BSKTC,S_ODEJY,S_RCKBY,S_DOEDR,S_SCALE,S_ONEUP,S_COIN, S_SONIC,S_ZELDA,_______,_______,_______,_______,_______,\
-      _______,   _______,_______,_______,RESET,  _______,_______,_______,_______,_______,_______,_______,_______,_______,     \
-      _______,     _______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  _______, \
-      _______,  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,     MO(_YF), \
-      _______,  _______,  _______,                        _______,                     _______,  _______,  MO(_FL),   _______),
-    [_YF] = LAYOUT_all(
-      _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\
-      _______,_______,KC_UP  ,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        \
-      _______,KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______,_______,_______,_______,_______,_______,  _______,     \
-      _______,  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,     MO(_YF), \
-      _______,  _______,  _______,                        _______,                     _______,  _______,  MO(_FL),   _______)
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-    switch (keycode) {
-        case S_BSKTC:
-            if (record->event.pressed) {
-                stop_all_notes();
-                PLAY_SONG(song_basketcase);
-            }
-            return false;
-        case S_ODEJY:
-            if (record->event.pressed) {
-                stop_all_notes();
-                PLAY_SONG(song_ode_to_joy);
-            }
-            return false;
-        case S_RCKBY:
-            if (record->event.pressed) {
-                stop_all_notes();
-                PLAY_SONG(song_rock_a_bye_baby);
-            }
-            return false;
-        case S_DOEDR:
-            if (record->event.pressed) {
-                stop_all_notes();
-                PLAY_SONG(song_doe_a_deer);
-            }
-            return false;
-        case S_SCALE:
-            if (record->event.pressed) {
-                stop_all_notes();
-                PLAY_SONG(song_scale);
-            }
-            return false;
-        case S_ONEUP:
-            if (record->event.pressed) {
-                stop_all_notes();
-                PLAY_SONG(song_one_up);
-            }
-            return false;
-        case S_COIN:
-            if (record->event.pressed) {
-                stop_all_notes();
-                PLAY_SONG(song_coin);
-            }
-            return false;
-        case S_SONIC:
-            if (record->event.pressed) {
-                stop_all_notes();
-                PLAY_SONG(song_sonic_ring);
-            }
-            return false;
-        case S_ZELDA:
-            if (record->event.pressed) {
-                stop_all_notes();
-                PLAY_SONG(song_zelda_puzzle);
-            }
-            return false;
-    }
-    return true;
-}

keyboards/clueboard/60/keymaps/yanfali/readme.md

@@ -1,14 +0,0 @@
-# /u/yanfali keymap for clueboard 60%
-
-Almost the same as default but differs in the following ways
-
- 1. `Caps Lock` -> `MT(KC_LCTL, KC_ESC)`.
-    I'm a heavy vim user and I prefer escape to be closer than default. I also move `Control` to this key if you hold it.
- 1. Switch Alt and GUI.
-    I spend most of my time on OSX, so I reverse Alt and GUI to be
-    more comfortable on OSX.
- 1. Added a custom layer.
-    I use this to map the cursor keys to WASD, the familiar directional
-    gaming keys. As I use a split right shift, this naturally leads
-    to the left hand being used for navigation. This is also the
-    best place to add custom mappings, macros and combo keys.

keyboards/clueboard/readme.md

@@ -8,6 +8,6 @@ Clueboard makes fully customizable custom keyboards in a variety of form-factors
   * [`2x1800`](2x1800/): Clueboard 2x1800 PCB
   * [`60`](60/): Clueboard 60% PCB
   * [`66`](66/): Clueboard 66% PCB
-  * [`66_hotswap`](66/): Clueboard 66% USB-C Hotswappable PCB
+  * [`66_hotswap`](66_hotswap/): Clueboard 66% USB-C Hotswappable PCB
   * [`card`](card/): Special Cluecard PCB
 * Hardware Availability: [clueboard.co](https://clueboard.co/)

keyboards/converter/modelm101/rules.mk

@@ -1,63 +1,16 @@
 # MCU name
 MCU = at90usb1286
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = halfkay
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-#OPT_DEFS += -DBOOTLOADER_SIZE=1024
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/copenhagen_click/click_pad_v1/config.h

@@ -41,8 +41,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  *
 */
-#define MATRIX_ROW_PINS { B5 }
+#define MATRIX_ROW_PINS { F7 }
-#define MATRIX_COL_PINS { B4 }
+#define MATRIX_COL_PINS { F5 }
 #define UNUSED_PINS
 
 /* COL2ROW, ROW2COL*/
@@ -53,7 +53,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 
-#define BACKLIGHT_PIN E6
+#define BACKLIGHT_PIN B5
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 

keyboards/coseyfannitutti/discipad/config.h

@@ -0,0 +1,249 @@
+/*
+Copyright 2019 coseyfannitutti
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1769
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    coseyfannitutti
+#define PRODUCT         DISCIPAD
+#define DESCRIPTION     17-key numpad assembled with only through hole components
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+
+/* A Custom matrix.c is used to poll the port expander C6 shows that the pins are hardwired there */
+#define MATRIX_ROW_PINS { B1, B0, D7, D6, D4 }
+#define MATRIX_COL_PINS { C0, C1, C2, C3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define NO_UART 1
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+*/

keyboards/coseyfannitutti/discipad/discipad.c

@@ -0,0 +1,24 @@
+/* Copyright 2019 coseyfannitutti
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "discipad.h"
+
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}

keyboards/coseyfannitutti/discipad/discipad.h

@@ -0,0 +1,43 @@
+/* Copyright 2019 coseyfannitutti
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define _x_ KC_NO
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_numpad_5x4( \
+  K00, K01, K02, K03, \
+  K10, K11, K12,      \
+  K20, K21, K22, K23, \
+  K30, K31, K32,      \
+  K40,      K42, K43  \
+) { \
+{ K00, K01, K02, K03, }, \
+{ K10, K11, K12, _x_, }, \
+{ K20, K21, K22, K23, }, \
+{ K30, K31, K32, _x_, }, \
+{ K40, _x_, K42, K43, }, \
+}
+

keyboards/coseyfannitutti/discipad/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "DISCIPAD", 
+    "url": "https://github.com/coseyfannitutti/discipad", 
+    "maintainer": "coseyfannitutti", 
+    "width": 4, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_numpad_5x4": {
+            "layout": [{"label":"Num Lock", "x":0, "y":0}, {"label":"/", "x":1, "y":0}, {"label":"*", "x":2, "y":0}, {"label":"-", "x":3, "y":0}, {"label":"7", "x":0, "y":1}, {"label":"8", "x":1, "y":1}, {"label":"9", "x":2, "y":1}, {"label":"4", "x":0, "y":2}, {"label":"5", "x":1, "y":2}, {"label":"6", "x":2, "y":2}, {"label":"+", "x":3, "y":1, "h":2}, {"label":"1", "x":0, "y":3}, {"label":"2", "x":1, "y":3}, {"label":"3", "x":2, "y":3}, {"label":"0", "x":0, "y":4, "w":2}, {"label":".", "x":2, "y":4}, {"label":"Enter", "x":3, "y":3, "h":2}]
+        }
+    }
+}

keyboards/coseyfannitutti/discipad/keymaps/default/keymap.c

@@ -0,0 +1,27 @@
+/* Copyright 2019 COSEYFANNITUTTI
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BL] = LAYOUT_numpad_5x4(
+      KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+      KC_P7,   KC_P8,   KC_P9,            
+      KC_P4,   KC_P5,   KC_P6,   KC_PPLS, 
+      KC_P1,   KC_P2,   KC_P3,            
+      KC_P0,   KC_PDOT,          KC_PENT  )
+};

keyboards/coseyfannitutti/discipad/readme.md

@@ -0,0 +1,15 @@
+# DISCIPAD
+
+![discipline](https://i.imgur.com/3Coydx7.jpg)
+
+A 17-key numpad that can be assembled with only through hole components, including usb type-c
+
+Keyboard Maintainer: [coseyfannitutti](https://github.com/coseyfannitutti)  
+Hardware Supported: DISCIPAD, atmega328p  
+Hardware Availability: [cftkb.com](http://www.cftkb.com), [GitHub](https://github.com/coseyfannitutti/discipad)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make coseyfannitutti/discipad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/coseyfannitutti/discipad/rules.mk

@@ -0,0 +1,34 @@
+# MCU name
+MCU = atmega328p
+
+# Bootloader selection
+BOOTLOADER = USBasp
+
+# Flash program via avrdude, but default command is not suitable.
+# You can use coseyfannitutti/discipad:default:program
+PROGRAM_CMD = avrdude -c usbasp -p m328p -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
+# disable debug code
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/coseyfannitutti/discipad/usbconfig.h

@@ -0,0 +1,397 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+// max power draw with maxed white underglow measured at 120 mA (peaks)
+#define USB_CFG_MAX_BUS_POWER           100
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   0
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x01, 0x00
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'c','o','s','e','y','f','a','n','n','i','t','u','t','t','i'
+#define USB_CFG_VENDOR_NAME_LEN 15
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'D','I','S','C','I','P','A','D'
+#define USB_CFG_DEVICE_NAME_LEN 8
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+#define USB_CFG_SERIAL_NUMBER   '0'
+#define USB_CFG_SERIAL_NUMBER_LEN   1
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+// #define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+// /* #define USB_INTR_CFG_CLR        0 */
+// /* #define USB_INTR_ENABLE         EIMSK */
+// #define USB_INTR_ENABLE_BIT     INT1
+// /* #define USB_INTR_PENDING        EIFR */
+// #define USB_INTR_PENDING_BIT    INTF1
+// #define USB_INTR_VECTOR         INT1_vect
+
+#endif /* __usbconfig_h_included__ */

keyboards/coseyfannitutti/discipline/rules.mk

@@ -1,61 +1,19 @@
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
 
-# Processor frequency.
+# Processor frequency
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
 F_CPU = 16000000
 
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
-#   atmega32a    bootloadHID
+#   ATmega32A    bootloadHID
-#
+#   ATmega328P   USBasp
-# This uses usbaspbootloader
 BOOTLOADER = USBasp
 
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-
 # Flash program via avrdude, but default command is not suitable.
 # You can use plaid:default:program
 PROGRAM_CMD = avrdude -c usbasp -p m32 -U flash:w:$(BUILD_DIR)/$(TARGET).hex
@@ -84,8 +42,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
 LAYOUTS = 65_ansi

keyboards/crkbd/keymaps/ninjonas/README.md

@@ -0,0 +1,99 @@
+# ninjonas Keymap for [Corne Keyboard (crkbd)](https://github.com/foostan/crkbd)
+
+## Keymap
+This keymap is designed based off my typing habits and is subject to change. Information about custom user macros and tap dances can be found [here](../../../../users/ninjonas).
+
+More information about the crkbd keyboard can be found [here](https://thomasbaart.nl/2018/11/26/corne-keyboard-helidox-build-log/)
+
+### QWERTY
+```c
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+  //      Tab,       Q,       W,       E,       R,      T,              Y,       U,       I,       O,       P,     \
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //      ESC,       A,       S,       D,       F,      G,              H,       J,       K,       L,       ;,     '
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //   LShift,       Z,       X,       C,       V,      B,              N,       M,       ,,       .,       /,     =
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                 //    ,    Ctrl,  Space,          Enter,  BackSP, Del
+                                 //`---------------------'      `---------------------'
+```
+
+### DVORAK
+```c
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+  //      Tab,       ',       ,,       .,       P,      Y,              F,       G,       C,       R,       L,     \
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //      ESC,       A,       O,       E,       U,      I,              D,       H,       T,       N,       S,     /
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //   LShift,       ;,       Q,       J,       K,      X,              B,       M,       W,       V,       Z,     =
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                 //    ,    Ctrl,  Space,          Enter,  BackSP, Del
+                                 //`---------------------'      `---------------------'
+```
+
+### COLEMAK
+```c
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+  //      Tab,       Q,       W,       F,       P,      G,              J,       L,       U,       Y,       ;,     \
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //      ESC,       A,       R,       S,       T,      D,              H,       N,       E,       I,       O,     '
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //   LShift,       Z,       X,       C,       V,      B,              K,       M,       ,,       .,       /,     =
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                 //    ,    Ctrl,  Space,          Enter,  BackSP, Del
+                                 //`---------------------'      `---------------------'
+```
+
+### LOWER
+```c
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+  //         ,        , KC_BRIU,    Play,    Mute, K_CSCN,           PgUp,    Home,      Up,     End,        ,  K_MDSH
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //         ,        , KC_BRID,    Next,   VolUp,       ,           PgDn,    Left,    Down,   Right,  K_LOCK,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //         ,        ,        ,    Prev,   VolDn,      [,              ],        ,        ,  M_CODE,  M_ZOOM, M_PYNV,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                 //     ,        ,       ,               ,        ,
+                                 //`---------------------'      `---------------------'
+```
+
+### RAISE
+```c
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+  //        `,       1,       2,       3,       4,      5,              6,       7,       8,       9,       0,      -
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //        ~,       !,       @,       #,       $,      %,              ^,       &,       *,       (,       ),      _
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //      F11,      F1,      F2,      F3,      F4,     F5,             F6,      F7,      F8,      F9,     F10,    F12
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                 //     ,        ,       ,               ,        ,
+                                 //`---------------------'      `---------------------'
+```
+
+### ADJUST
+```c
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+  //   M_MAKE, EEP_RST,        ,        ,        ,        ,       RGB_TOG,        ,        , COLEMAK,  DVORAK, QWERTY,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //   M_VRSN,  M_MALL,        , RGB_SAI, RGB_HUI, RGB_VAI,              ,        ,        ,        ,        ,        ,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //   M_FLSH,        ,        , RGB_SAD, RGB_HUD, RGB_VAD,       RGB_M_P, RGB_M_B,RGB_M_SW,        ,        ,        ,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                 //     ,        ,       ,               ,        ,
+                                 //`---------------------'      `---------------------'
+```
+
+<!--
+### TEMPLATE
+```c
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+  //         ,        ,        ,        ,        ,       ,               ,        ,        ,        ,        ,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //         ,        ,        ,        ,        ,       ,               ,        ,        ,        ,        ,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+  //         ,        ,        ,        ,        ,       ,               ,        ,        ,        ,        ,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                 //     ,        ,       ,               ,        ,
+                                 //`---------------------'      `---------------------'
+```
+-->

keyboards/crkbd/keymaps/ninjonas/config.h

@@ -0,0 +1,48 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <[email protected]>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+
+#ifdef RGBLIGHT_ENABLE
+    #undef RGBLED_NUM
+    #undef RGBLIGHT_ANIMATIONS   // https://docs.qmk.fm/#/feature_rgblight?id=effect-and-animation-toggles
+    #define RGBLIGHT_EFFECT_BREATHING
+    #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+    #define RGBLED_NUM 27
+    #define RGBLIGHT_LIMIT_VAL 120
+    #define RGBLIGHT_HUE_STEP 10
+    #define RGBLIGHT_SAT_STEP 17
+    #define RGBLIGHT_VAL_STEP 17
+#endif 
+
+#define OLED_FONT_H "keyboards/crkbd/lib/glcdfont.c"
+#define OLED_DISABLE_TIMEOUT

keyboards/crkbd/keymaps/ninjonas/keymap.c

@@ -0,0 +1,89 @@
+#include QMK_KEYBOARD_H
+#include "ninjonas.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_wrapper(
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+     _____________________QWERTY_L1______________________,       _____________________QWERTY_R1______________________,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+     _____________________QWERTY_L2______________________,       _____________________QWERTY_R2______________________,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+     _____________________QWERTY_L3______________________,       _____________________QWERTY_R3______________________,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                    T_GUI, KC_LCTL,LT_RAI,       LT_LOW,KC_BSPC,KC_DEL
+                                 //`---------------------'      `---------------------'
+  ),
+
+  [_DVORAK] = LAYOUT_wrapper(
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+     _____________________DVORAK_L1______________________,       _____________________DVORAK_R1______________________,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+     _____________________DVORAK_L2______________________,       _____________________DVORAK_R2______________________,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+     _____________________DVORAK_L3______________________,       _____________________DVORAK_R3______________________,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                    T_GUI, KC_LCTL,LT_RAI,       LT_LOW,KC_BSPC,KC_DEL
+                                 //`---------------------'      `---------------------'
+  ),
+
+  [_COLEMAK] = LAYOUT_wrapper(
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+     _____________________COLEMAK_L1_____________________,       _____________________COLEMAK_R1_____________________,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+     _____________________COLEMAK_L2_____________________,       _____________________COLEMAK_R2_____________________,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+     _____________________COLEMAK_L3_____________________,       _____________________COLEMAK_R3_____________________,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                    T_GUI, KC_LCTL,LT_RAI,       LT_LOW,KC_BSPC,KC_DEL
+                                 //`---------------------'      `---------------------'
+  ),
+
+  [_LOWER] = LAYOUT_wrapper(
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+     XXXXXXX, XXXXXXX, _________MEDIA_1_________,  K_CSCN,       _______________NAV_1______________,  XXXXXXX, K_MDSH,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+     XXXXXXX, XXXXXXX, _________MEDIA_2_________, XXXXXXX,       _______________NAV_2______________,   K_LOCK, XXXXXXX,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+     _______,  M_SHFT, _________MEDIA_3_________,  T_LBRC,         T_RBRC, _______, XXXXXXX,  M_CODE,  M_ZOOM, M_PYNV,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                    _______,_______,_______,     _______,_______,_______
+                                 //`---------------------'      `---------------------'
+  ),
+
+  [_RAISE] = LAYOUT_wrapper( \
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+     _____________________NUM_LEFT_______________________,       _____________________NUM_RIGHT______________________,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+     _____________________SYM_LEFT_______________________,       _____________________SYM_RIGHT______________________,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+     _____________________FUNC_LEFT______________________,       _____________________FUNC_RIGHT_____________________,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                    _______,_______,_______,     _______,_______,_______
+                                 //`---------------------'      `---------------------'
+  ),
+
+  [_ADJUST] = LAYOUT_wrapper( \
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+       M_MAKE, EEP_RST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,       RGB_TOG, XXXXXXX, XXXXXXX, COLEMAK,  DVORAK, QWERTY,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+       M_VRSN,  M_MALL, XXXXXXX, RGB_SAI, RGB_HUI, RGB_VAI,       XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+       M_FLSH, XXXXXXX, XXXXXXX, RGB_SAD, RGB_HUD, RGB_VAD,       RGB_M_P, RGB_M_B,RGB_M_SW, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                    _______,_______,_______,     _______,_______,_______
+                                 //`---------------------'      `---------------------'
+  ),
+/*
+  [_TEMPLATE] = LAYOUT_wrapper( \
+  //,----------------------------------------------------.      ,----------------------------------------------------.
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,       XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,       XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,       XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+  //|--------+--------+--------+--------+--------+-------|      |--------+--------+--------+--------+--------+-------|
+                                    _______,_______,_______,     _______,_______,_______
+                                 //`---------------------'      `---------------------'
+  ),
+*/
+};

keyboards/crkbd/keymaps/ninjonas/rgb.c

@@ -0,0 +1,27 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
+int RGB_current_mode;
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+void keyboard_post_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+}

keyboards/crkbd/keymaps/ninjonas/rules.mk

@@ -0,0 +1,11 @@
+RGBLIGHT_ENABLE = yes
+MOUSEKEY_ENABLE = no
+OLED_DRIVER_ENABLE = yes
+LINK_TIME_OPTIMIZATION_ENABLE = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+# If you want to change the display of OLED, you need to change here
+SRC +=  ./lib/rgb_state_reader.c \
+        rgb.c

keyboards/donutcables/budget96/rules.mk

@@ -15,19 +15,15 @@
 
 # MCU name
 MCU = atmega32a
-PROTOCOL = VUSB
 
-# unsupported features for now
+# Bootloader selection
-NO_UART = yes
+#   Teensy       halfkay
-NO_SUSPEND_POWER_DOWN = yes
+#   Pro Micro    caterina
-
+#   Atmel DFU    atmel-dfu
-# processor frequency
+#   LUFA DFU     lufa-dfu
-F_CPU = 12000000
+#   QMK DFU      qmk-dfu
-
+#   ATmega32A    bootloadHID
-# Bootloader
+#   ATmega328P   USBasp
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = bootloadHID
 
 # build options
@@ -44,6 +40,3 @@ OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 SRC = i2c_master.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/donutcables/scrabblepad/rules.mk

@@ -1,51 +1,15 @@
 # MCU name
 MCU = at90usb1286
 
-# Processor frequency.
+# Bootloader selection
-#     This will define a symbol, F_CPU, in all source code files equal to the
+#   Teensy       halfkay
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#   Pro Micro    caterina
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#   Atmel DFU    atmel-dfu
-#     automatically to create a 32-bit value in your source code.
+#   LUFA DFU     lufa-dfu
-#
+#   QMK DFU      qmk-dfu
-#     This will be an integer division of F_USB below, as it is sourced by
+#   ATmega32A    bootloadHID
-#     F_USB after it has run through any CPU prescalers. Note that this value
+#   ATmega328P   USBasp
-#     does not *change* the processor frequency - it should merely be updated to
+BOOTLOADER = halfkay
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/doro67/multi/info.json

@@ -5,7 +5,7 @@
   "width": 16,
   "height": 5,
   "layouts": {
-    "LAYOUT_ansi": {
+    "LAYOUT_65_ansi_blocker": {
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Ins", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Del", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Fn", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
     },
     "LAYOUT_iso": {

keyboards/doro67/multi/keymaps/default/keymap.c

@@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * │LCtl│LGui│LAlt│         Space          │RAlt│ Fn │ │ ← │ ↓ │ → │
      * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
      */
-    [0] = LAYOUT_ansi(
+    [0] = LAYOUT_65_ansi_blocker(
         KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_INS,
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,
         KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_PGUP,
@@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * │    │    │    │                        │    │    │ │   │   │   │
      * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
      */
-    [1] = LAYOUT_ansi(
+    [1] = LAYOUT_65_ansi_blocker(
         KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,          _______,
         BL_TOGG, BL_STEP, BL_DEC,  BL_INC,  RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,          _______,

keyboards/doro67/multi/multi.h

@@ -17,7 +17,7 @@
 
 #include "quantum.h"
 
-#define LAYOUT_ansi( \
+#define LAYOUT_65_ansi_blocker( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D,      k0E, \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,      k1E, \
     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B,      k2D,      k2E, \

keyboards/doro67/multi/rules.mk

@@ -1,9 +1,4 @@
 MCU = atmega32u4
-F_CPU = 16000000
-ARCH = AVR8
-F_USB = $(F_CPU)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
 
 # Bootloader selection
 #   Teensy       halfkay
@@ -15,16 +10,6 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 BOOTLOADER = atmel-dfu
 
 
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #
@@ -45,3 +30,5 @@ BLUETOOTH_ENABLE = no        # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no            # Audio output on port C6
 FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no          # Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = 65_ansi_blocker

keyboards/doro67/regular/info.json

@@ -5,7 +5,7 @@
     "width": 16,
     "height": 5,
     "layouts": {
-      "LAYOUT": {
+      "LAYOUT_65_ansi_blocker": {
         "key_count": 67,
         "layout": [
           {"label":"K00", "x":0, "y":0},

keyboards/doro67/regular/keymaps/default/keymap.c

@@ -29,7 +29,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * │LCtl│LGui│LAlt│         Space          │RAlt│ Fn │ │ ← │ ↓ │ → │
      * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
      */
-    [0] = LAYOUT(
+    [0] = LAYOUT_65_ansi_blocker(
         KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
         KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
@@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * │    │    │    │                        │    │    │ │   │   │   │
      * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
      */
-    [1] = LAYOUT(
+    [1] = LAYOUT_65_ansi_blocker(
         KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
         _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,

keyboards/doro67/regular/regular.h

@@ -17,7 +17,7 @@
 
 #include "quantum.h"
 
-#define LAYOUT( \
+#define LAYOUT_65_ansi_blocker( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
     k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
     k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B,      k2D, k2E, \

keyboards/doro67/regular/rules.mk

@@ -1,43 +1,6 @@
 # MCU name
 MCU = atmega32u4
 
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
@@ -47,17 +10,6 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   atmega32a    bootloadHID
 BOOTLOADER = atmel-dfu
 
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #
@@ -78,3 +30,5 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = 65_ansi_blocker