Allow 30us matrix delay to be keyboard/user overridable (#8216)

* Allow 30us matrix delay to be configurable via define

* Move wait logic to matrix_common

* Move wait logic to matrix_common - fix wait includes

docs/config_options.md

@@ -53,6 +53,8 @@ This is a C header file that is one of the first things included, and will persi
   * pins of the rows, from top to bottom
 * `#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }`
   * pins of the columns, from left to right
+* `#define MATRIX_IO_DELAY 30`
+  * the delay in microseconds when between changing matrix pin state and reading values
 * `#define UNUSED_PINS { D1, D2, D3, B1, B2, B3 }`
   * pins unused by the keyboard for reference
 * `#define MATRIX_HAS_GHOST`

keyboards/crkbd/keymaps/bcat/keymap.c

@@ -23,23 +23,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
     /* Lower layer: http://www.keyboard-layout-editor.com/#/gists/c3fba5eaa2cd70fdfbdbc0f9e34d3bc0 */
     [LAYER_LOWER] = LAYOUT(
-        KC_TILD,  KC_EXLM,  KC_AT,    KC_HASH,  KC_DLR,   KC_PERC,                      KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN,  _______,
+        KC_CAPS,  KC_EXLM,  KC_AT,    KC_HASH,  KC_DLR,   KC_PERC,                      KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN,  _______,
-        _______,  KC_PSCR,  KC_SLCK,  KC_PAUS,  KC_INS,   KC_DEL,                       KC_PIPE,  KC_UNDS,  KC_PLUS,  KC_LCBR,  KC_RCBR,  _______,
+        _______,  _______,  _______,  _______,  _______,  _______,                      KC_PIPE,  KC_UNDS,  KC_PLUS,  KC_LCBR,  KC_RCBR,  KC_TILD,
-        _______,  _______,  _______,  _______,  _______,  KC_APP,                       KC_BSLS,  KC_MINS,  KC_EQL,   KC_LBRC,  KC_RBRC,  _______,
+        _______,  _______,  KC_PSCR,  KC_SLCK,  KC_PAUS,  KC_APP,                       KC_BSLS,  KC_MINS,  KC_EQL,   KC_LBRC,  KC_RBRC,  KC_GRV,
                                                 _______,  _______,  _______,  _______,  _______,  _______
     ),
 
     /* Raise layer: http://www.keyboard-layout-editor.com/#/gists/08b44355d4ca85d294bad9e2821f91d7 */
     [LAYER_RAISE] = LAYOUT(
-        KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,                         KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     _______,
+        _______,  KC_1,     KC_2,     KC_3,     KC_4,     KC_5,                         KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     _______,
-        _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,                        KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  KC_F11,   _______,
+        _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,                        KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  KC_F11,   KC_DEL,
-        _______,  KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,                       KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END,   KC_F12,   _______,
+        _______,  KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,                       KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END,   KC_F12,   KC_INS,
                                                 _______,  _______,  _______,  _______,  _______,  _______
     ),
 
     /* Adjust layer: http://www.keyboard-layout-editor.com/#/gists/77e7572e077b36a23eb2086017e16fee */
     [LAYER_ADJUST] = LAYOUT(
-        KC_CAPS,  _______,  KC_MPLY,  KC_VOLU,  KC_MSTP,  _______,                      EEP_RST,  RESET,    _______,  _______,  _______,  _______,
+        _______,  _______,  KC_MPLY,  KC_VOLU,  KC_MSTP,  _______,                      EEP_RST,  RESET,    _______,  _______,  _______,  _______,
         _______,  _______,  KC_MPRV,  KC_VOLD,  KC_MNXT,  _______,                      RGB_RMOD, RGB_VAD,  RGB_VAI,  RGB_MOD,  RGB_SPI,  _______,
         _______,  _______,  _______,  KC_MUTE,  _______,  _______,                      RGB_HUI,  RGB_SAD,  RGB_SAI,  RGB_HUD,  RGB_SPD,  _______,
                                                 _______,  _______,  _______,  RGB_TOG,  _______,  _______

keyboards/crkbd/keymaps/bcat/readme.md

@@ -13,18 +13,18 @@ more details on the principles that went into the layout.
 
 ## Lower layer
 
-![Lower layer layout](https://i.imgur.com/v4DjXM6.png)
+![Lower layer layout](https://i.imgur.com/rDlSmrA.png)
 
 ([KLE](http://www.keyboard-layout-editor.com/#/gists/c3fba5eaa2cd70fdfbdbc0f9e34d3bc0))
 
 ## Raise layer
 
-![Raise layer layout](https://i.imgur.com/Wr6Ptyy.png)
+![Raise layer layout](https://i.imgur.com/cVoKygg.png)
 
 ([KLE](http://www.keyboard-layout-editor.com/#/gists/08b44355d4ca85d294bad9e2821f91d7))
 
 ## Adjust layer
 
-![Adjust layer layout](https://i.imgur.com/9OtGLCT.png)
+![Adjust layer layout](https://i.imgur.com/LEHM4DU.png)
 
 ([KLE](http://www.keyboard-layout-editor.com/#/gists/77e7572e077b36a23eb2086017e16fee))

keyboards/kbdfans/kbd8x_mk2/keymaps/via/keymap.c

@@ -0,0 +1,59 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Layer Zero */
+    
+	KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,        KC_F5,   KC_F6,   KC_F7,   KC_F8,       KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_PSCR, KC_SLCK, KC_PAUS, 
+	KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,           KC_INS,  KC_HOME, KC_PGUP, 
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,          KC_DEL,  KC_END,  KC_PGDN, 
+	KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,                                      
+	KC_LSFT, KC_BSLS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, KC_DEL,                    KC_UP,            
+	KC_LCTL, KC_LGUI, KC_LALT,                           KC_SPC,                                       KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT  
+  ),
+
+  [1] = LAYOUT( /* Layer One */
+    
+	KC_TRNS,           KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,        KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,               KC_TRNS,   KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,  KC_TRNS, KC_TRNS, 
+	KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,   KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,  KC_TRNS, KC_TRNS, 
+	KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,   KC_TRNS,           KC_TRNS,          KC_TRNS,  KC_TRNS, KC_TRNS, 
+	KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,                      KC_TRNS,                                      
+	KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,             KC_TRNS, KC_TRNS,                   KC_TRNS,           
+	KC_TRNS, KC_TRNS,  KC_TRNS,                                        KC_TRNS,                                                    KC_TRNS,   KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS   
+  ),
+
+  [2] = LAYOUT( /* Layer Two */
+    
+	KC_TRNS,           KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,        KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,               KC_TRNS,   KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,  KC_TRNS, KC_TRNS, 
+	KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,   KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,  KC_TRNS, KC_TRNS, 
+	KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,   KC_TRNS,           KC_TRNS,          KC_TRNS,  KC_TRNS, KC_TRNS, 
+	KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,                      KC_TRNS,                                      
+	KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,             KC_TRNS, KC_TRNS,                   KC_TRNS,           
+	KC_TRNS, KC_TRNS,  KC_TRNS,                                        KC_TRNS,                                                    KC_TRNS,   KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS   
+  ),
+
+  [3] = LAYOUT( /* Layer Three */
+    
+	KC_TRNS,           KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,        KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,               KC_TRNS,   KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,  KC_TRNS, KC_TRNS, 
+	KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,   KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS,  KC_TRNS, KC_TRNS, 
+	KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,   KC_TRNS,           KC_TRNS,          KC_TRNS,  KC_TRNS, KC_TRNS, 
+	KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,                      KC_TRNS,                                      
+	KC_TRNS, KC_TRNS,  KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,    KC_TRNS,             KC_TRNS, KC_TRNS,                   KC_TRNS,           
+	KC_TRNS, KC_TRNS,  KC_TRNS,                                        KC_TRNS,                                                    KC_TRNS,   KC_TRNS,  KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS   
+  )
+
+};

keyboards/kbdfans/kbd8x_mk2/keymaps/via/readme.md

@@ -0,0 +1,3 @@
+# Via keymap for VIA
+
+Based on the default keymap.

keyboards/kbdfans/kbd8x_mk2/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/kc60se/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -24,7 +23,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x0000
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    NPKC
+#define MANUFACTURER    Unknown
 #define PRODUCT         kc60se
 #define DESCRIPTION     A custom 60% keyboard
 
@@ -32,32 +31,30 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 14
 
-/*
+/* * Keyboard Matrix Assignments */
- * Keyboard Matrix Assignments
- */
-
 #define UNUSED_PINS
 #define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
 #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
+
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 #define BACKLIGHT_PIN F5
-// #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 6
 
+// #define BACKLIGHT_BREATHING
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
+// #define LOCKING_SUPPORT_ENABLE
+
 /* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
+// #define LOCKING_RESYNC_ENABLE
 
 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
  * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
@@ -83,7 +80,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  * power-up.
  *
  */
-//#define FORCE_NKRO
+// #define FORCE_NKRO
 
 /*
  * Magic Key Options
@@ -173,5 +170,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-#endif

keyboards/kc60se/info.json

@@ -1,20 +1,58 @@
 {
-  "keyboard_name": "kc60se",
+    "keyboard_name": "kc60se",
-  "url": "",
+    "url": "",
-  "maintainer": "qmk",
+    "maintainer": "qmk",
-  "width": 15,
+    "width": 15,
-  "height": 5,
+    "height": 5,
-  "layouts": {
+    "layouts": {
-    "LAYOUT": {
+        "LAYOUT_all": {
-      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+            "key_count": 65,
-      },
+            "layout": [
-
+                 {"label":"Esc", "x":0, "y":0},{"label":"!", "x":1, "y":0},{"label":"@", "x":2, "y":0},{"label":"#", "x":3, "y":0},{"label":"$", "x":4, "y":0},{"label":"%", "x":5, "y":0},{"label":"^", "x":6, "y":0},{"label":"&", "x":7, "y":0},{"label":"*", "x":8, "y":0},{"label":"(", "x":9, "y":0},{"label":")", "x":10, "y":0},{"label":"_", "x":11, "y":0},{"label":"+", "x":12, "y":0},{"label":"|", "x":13, "y":0},{"label":"~", "x":14, "y":0},
-      "LAYOUT_60_ansi_split_bs_rshift": {
+                 {"label":"Tab", "x":0, "y":1, "w":1.5},{"label":"Q", "x":1.5, "y":1},{"label":"W", "x":2.5, "y":1},{"label":"E", "x":3.5, "y":1},{"label":"R", "x":4.5, "y":1},{"label":"T", "x":5.5, "y":1},{"label":"Y", "x":6.5, "y":1},{"label":"U", "x":7.5, "y":1},{"label":"I", "x":8.5, "y":1},{"label":"O", "x":9.5, "y":1},{"label":"P", "x":10.5, "y":1},{"label":"{", "x":11.5, "y":1},{"label":"}", "x":12.5, "y":1},{"label":"Backspace", "x":13.5, "y":1, "w":1.5},
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+                 {"label":"Control", "x":0, "y":2, "w":1.75},{"label":"A", "x":1.75, "y":2},{"label":"S", "x":2.75, "y":2},{"label":"D", "x":3.75, "y":2},{"label":"F", "x":4.75, "y":2},{"label":"G", "x":5.75, "y":2},{"label":"H", "x":6.75, "y":2},{"label":"J", "x":7.75, "y":2},{"label":"K", "x":8.75, "y":2},{"label":"L", "x":9.75, "y":2},{"label":";", "x":10.75, "y":2},{"label":"'", "x":11.75, "y":2},{"label":"#", "x":12.75, "y":2},{"label":"Enter", "x":13.75, "y":2, "w":1.25},
-      },
+                 {"label":"Shift", "x":0, "y":3, "w":1.25},{"label":"|", "x":1.25, "y":3},{"label":"Z", "x":2.25, "y":3},{"label":"X", "x":3.25, "y":3},{"label":"C", "x":4.25, "y":3},{"label":"V", "x":5.25, "y":3},{"label":"B", "x":6.25, "y":3},{"label":"N", "x":7.25, "y":3},{"label":"M", "x":8.25, "y":3},{"label":"<", "x":9.25, "y":3},{"label":">", "x":10.25, "y":3},{"label":"?", "x":11.25, "y":3},{"label":"Shift", "x":12.25, "y":3, "w":1.75},{"label":"Fn", "x":14, "y":3},
-
+                 {"label":"Gui", "x":0, "y":4, "w":1.25},{"label":"Alt", "x":1.25, "y":4, "w":1.25},{"label":"Fn", "x":2.5, "y":4, "w":1.25},{"label":" ", "x":3.75, "y":4, "w":6.25},{"label":"Alt", "x":10, "y":4, "w":1.25},{"label":"Gui", "x":11.25, "y":4, "w":1.25},{"label":"Win", "x":12.5, "y":4, "w":1.25},{"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
-      "LAYOUT_60_ansi": {
+            ]
-        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
-      }
+        "LAYOUT_60_ansi": {
-  }
+            "key_count": 61,
+            "layout": [
+                 {"label":"Esc", "x":0, "y":0},{"label":"!", "x":1, "y":0},{"label":"@", "x":2, "y":0},{"label":"#", "x":3, "y":0},{"label":"$", "x":4, "y":0},{"label":"%", "x":5, "y":0},{"label":"^", "x":6, "y":0},{"label":"&", "x":7, "y":0},{"label":"*", "x":8, "y":0},{"label":"(", "x":9, "y":0},{"label":")", "x":10, "y":0},{"label":"_", "x":11, "y":0},{"label":"+", "x":12, "y":0},{"label":"Backspace", "x":13, "y":0, "w":2},
+                 {"label":"Tab", "x":0, "y":1, "w":1.5},{"label":"Q", "x":1.5, "y":1},{"label":"W", "x":2.5, "y":1},{"label":"E", "x":3.5, "y":1},{"label":"R", "x":4.5, "y":1},{"label":"T", "x":5.5, "y":1},{"label":"Y", "x":6.5, "y":1},{"label":"U", "x":7.5, "y":1},{"label":"I", "x":8.5, "y":1},{"label":"O", "x":9.5, "y":1},{"label":"P", "x":10.5, "y":1},{"label":"{", "x":11.5, "y":1},{"label":"}", "x":12.5, "y":1},{"label":"|", "x":13.5, "y":1, "w":1.5},
+                 {"label":"CapsLock", "x":0, "y":2, "w":1.75},{"label":"A", "x":1.75, "y":2},{"label":"S", "x":2.75, "y":2},{"label":"D", "x":3.75, "y":2},{"label":"F", "x":4.75, "y":2},{"label":"G", "x":5.75, "y":2},{"label":"H", "x":6.75, "y":2},{"label":"J", "x":7.75, "y":2},{"label":"K", "x":8.75, "y":2},{"label":"L", "x":9.75, "y":2},{"label":";", "x":10.75, "y":2},{"label":"'", "x":11.75, "y":2},{"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                 {"label":"Shift", "x":0, "y":3, "w":2.25},{"label":"Z", "x":2.25, "y":3},{"label":"X", "x":3.25, "y":3},{"label":"C", "x":4.25, "y":3},{"label":"V", "x":5.25, "y":3},{"label":"B", "x":6.25, "y":3},{"label":"N", "x":7.25, "y":3},{"label":"M", "x":8.25, "y":3},{"label":"<", "x":9.25, "y":3},{"label":">", "x":10.25, "y":3},{"label":"?", "x":11.25, "y":3},{"label":"Shift", "x":12.25, "y":3, "w":2.75},
+                 {"label":"Ctrl", "x":0, "y":4, "w":1.25},{"label":"Gui", "x":1.25, "y":4, "w":1.25},{"label":"Alt", "x":2.5, "y":4, "w":1.25},{"label":" ", "x":3.75, "y":4, "w":6.25},{"label":"Alt", "x":10, "y":4, "w":1.25},{"label":"Gui", "x":11.25, "y":4, "w":1.25},{"label":"Win", "x":12.5, "y":4, "w":1.25},{"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+        "LAYOUT_60_iso": {
+            "key_count": 62,
+            "layout": [
+                 {"label":"Esc", "x":0, "y":0},{"label":"!", "x":1, "y":0},{"label":"@", "x":2, "y":0},{"label":"#", "x":3, "y":0},{"label":"$", "x":4, "y":0},{"label":"%", "x":5, "y":0},{"label":"^", "x":6, "y":0},{"label":"&", "x":7, "y":0},{"label":"*", "x":8, "y":0},{"label":"(", "x":9, "y":0},{"label":")", "x":10, "y":0},{"label":"_", "x":11, "y":0},{"label":"+", "x":12, "y":0},{"label":"Backspace", "x":13, "y":0, "w":2},
+                 {"label":"Tab", "x":0, "y":1, "w":1.5},{"label":"Q", "x":1.5, "y":1},{"label":"W", "x":2.5, "y":1},{"label":"E", "x":3.5, "y":1},{"label":"R", "x":4.5, "y":1},{"label":"T", "x":5.5, "y":1},{"label":"Y", "x":6.5, "y":1},{"label":"U", "x":7.5, "y":1},{"label":"I", "x":8.5, "y":1},{"label":"O", "x":9.5, "y":1},{"label":"P", "x":10.5, "y":1},{"label":"{", "x":11.5, "y":1},{"label":"}", "x":12.5, "y":1},
+                 {"label":"Caps Lock", "x":0, "y":2, "w":1.75},{"label":"A", "x":1.75, "y":2},{"label":"S", "x":2.75, "y":2},{"label":"D", "x":3.75, "y":2},{"label":"F", "x":4.75, "y":2},{"label":"G", "x":5.75, "y":2},{"label":"H", "x":6.75, "y":2},{"label":"J", "x":7.75, "y":2},{"label":"K", "x":8.75, "y":2},{"label":"L", "x":9.75, "y":2},{"label":":", "x":10.75, "y":2},{"label":"@", "x":11.75, "y":2},{"label":"#", "x":12.75, "y":2},{"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
+                 {"label":"Shift", "x":0, "y":3, "w":1.25},{"label":"|", "x":1.25, "y":3},{"label":"Z", "x":2.25, "y":3},{"label":"X", "x":3.25, "y":3},{"label":"C", "x":4.25, "y":3},{"label":"V", "x":5.25, "y":3},{"label":"B", "x":6.25, "y":3},{"label":"N", "x":7.25, "y":3},{"label":"M", "x":8.25, "y":3},{"label":"<", "x":9.25, "y":3},{"label":">", "x":10.25, "y":3},{"label":"?", "x":11.25, "y":3},{"label":"Shift", "x":12.25, "y":3, "w":2.75},
+                 {"label":"Ctrl", "x":0, "y":4, "w":1.25},{"label":"Win", "x":1.25, "y":4, "w":1.25},{"label":"Alt", "x":2.5, "y":4, "w":1.25},{"x":3.75, "y":4, "w":6.25},{"label":"AltGr", "x":10, "y":4, "w":1.25},{"label":"Win", "x":11.25, "y":4, "w":1.25},{"label":"Menu", "x":12.5, "y":4, "w":1.25},{"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+             ]
+         },
+         "LAYOUT_60_ansi_split_bs_rshift": {
+            "key_count": 63,
+            "layout": [
+                 {"label":"Esc~", "x":0, "y":0},{"label":"!", "x":1, "y":0},{"label":"@", "x":2, "y":0},{"label":"#", "x":3, "y":0},{"label":"$", "x":4, "y":0},{"label":"%", "x":5, "y":0},{"label":"^", "x":6, "y":0},{"label":"&", "x":7, "y":0},{"label":"*", "x":8, "y":0},{"label":"(", "x":9, "y":0},{"label":")", "x":10, "y":0},{"label":"_", "x":11, "y":0},{"label":"+", "x":12, "y":0},{"label":"|", "x":13, "y":0},{"label":"~", "x":14, "y":0},
+                 {"label":"Tab", "x":0, "y":1, "w":1.5},{"label":"Q", "x":1.5, "y":1},{"label":"W", "x":2.5, "y":1},{"label":"E", "x":3.5, "y":1},{"label":"R", "x":4.5, "y":1},{"label":"T", "x":5.5, "y":1},{"label":"Y", "x":6.5, "y":1},{"label":"U", "x":7.5, "y":1},{"label":"I", "x":8.5, "y":1},{"label":"O", "x":9.5, "y":1},{"label":"P", "x":10.5, "y":1},{"label":" {", "x":11.5, "y":1},{"label":"}", "x":12.5, "y":1},{"label":"Backspace", "x":13.5, "y":1, "w":1.5},
+                 {"label":"Control", "x":0, "y":2, "w":1.75},{"label":"A", "x":1.75, "y":2},{"label":"S", "x":2.75, "y":2},{"label":"D", "x":3.75, "y":2},{"label":"F", "x":4.75, "y":2},{"label":"G", "x":5.75, "y":2},{"label":"H", "x":6.75, "y":2},{"label":"J", "x":7.75, "y":2},{"label":"K", "x":8.75, "y":2},{"label":"L", "x":9.75, "y":2},{"label":";", "x":10.75, "y":2},{"label":"'", "x":11.75, "y":2},{"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                 {"label":"Shift", "x":0, "y":3, "w":2.25},{"label":"Z", "x":2.25, "y":3},{"label":"X", "x":3.25, "y":3},{"label":"C", "x":4.25, "y":3},{"label":"V", "x":5.25, "y":3},{"label":"B", "x":6.25, "y":3},{"label":"N", "x":7.25, "y":3},{"label":"M", "x":8.25, "y":3},{"label":"<", "x":9.25, "y":3},{"label":">", "x":10.25, "y":3},{"label":"?", "x":11.25, "y":3},{"label":"Shift", "x":12.25, "y":3, "w":1.75},{"label":"Fn", "x":14, "y":3},
+                 {"label":"Gui", "x":0, "y":4, "w":1.25},{"label":"Alt", "x":1.25, "y":4, "w":1.25},{"label":"Fn", "x":2.5, "y":4, "w":1.25},{"label":" ", "x":3.75, "y":4, "w":6.25},{"label":"Alt", "x":10, "y":4, "w":1.25},{"label":"Gui", "x":11.25, "y":4, "w":1.25},{"label":"Win", "x":12.5, "y":4, "w":1.25},{"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_iso_split_bs_rshift": {
+            "key_count": 64,
+            "layout": [
+                 {"label":"Esc", "x":0, "y":0},{"label":"!", "x":1, "y":0},{"label":"@", "x":2, "y":0},{"label":"#", "x":3, "y":0},{"label":"$", "x":4, "y":0},{"label":"%", "x":5, "y":0},{"label":"^", "x":6, "y":0},{"label":"&", "x":7, "y":0},{"label":"*", "x":8, "y":0},{"label":"(", "x":9, "y":0},{"label":")", "x":10, "y":0},{"label":"_", "x":11, "y":0},{"label":"+", "x":12, "y":0},{"label":"`", "x":13, "y":0},{"label":"Backspace", "x":14, "y":0},
+                 {"label":"Tab", "x":0, "y":1, "w":1.5},{"label":"Q", "x":1.5, "y":1},{"label":"W", "x":2.5, "y":1},{"label":"E", "x":3.5, "y":1},{"label":"R", "x":4.5, "y":1},{"label":"T", "x":5.5, "y":1},{"label":"Y", "x":6.5, "y":1},{"label":"U", "x":7.5, "y":1},{"label":"I", "x":8.5, "y":1},{"label":"O", "x":9.5, "y":1},{"label":"P", "x":10.5, "y":1},{"label":"{", "x":11.5, "y":1},{"label":"}", "x":12.5, "y":1},
+                 {"label":"Caps Lock", "x":0, "y":2, "w":1.75},{"label":"A", "x":1.75, "y":2},{"label":"S", "x":2.75, "y":2},{"label":"D", "x":3.75, "y":2},{"label":"F", "x":4.75, "y":2},{"label":"G", "x":5.75, "y":2},{"label":"H", "x":6.75, "y":2},{"label":"J", "x":7.75, "y":2},{"label":"K", "x":8.75, "y":2},{"label":"L", "x":9.75, "y":2},{"label":":", "x":10.75, "y":2},{"label":"@", "x":11.75, "y":2},{"label":"#", "x":12.75, "y":2},{"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
+                 {"label":"Shift", "x":0, "y":3, "w":1.25},{"label":"|", "x":1.25, "y":3},{"label":"Z", "x":2.25, "y":3},{"label":"X", "x":3.25, "y":3},{"label":"C", "x":4.25, "y":3},{"label":"V", "x":5.25, "y":3},{"label":"B", "x":6.25, "y":3},{"label":"N", "x":7.25, "y":3},{"label":"M", "x":8.25, "y":3},{"label":"<", "x":9.25, "y":3},{"label":">", "x":10.25, "y":3},{"label":"?", "x":11.25, "y":3},{"label":"Shift", "x":12.25, "y":3, "w":1.75},{"label":"Fn", "x":14, "y":3},
+                 {"label":"Ctrl", "x":0, "y":4, "w":1.25},{"label":"Win", "x":1.25, "y":4, "w":1.25},{"label":"Alt", "x":2.5, "y":4, "w":1.25},{"x":3.75, "y":4, "w":6.25},{"label":"AltGr", "x":10, "y":4, "w":1.25},{"label":"Win", "x":11.25, "y":4, "w":1.25},{"label":"Menu", "x":12.5, "y":4, "w":1.25},{"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+            ]
+        }
+    }
 }

keyboards/kc60se/kc60se.c

@@ -13,12 +13,18 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "kc60se.h"
 
-extern inline void kc60se_caps_led_on(void);
+#include QMK_KEYBOARD_H
-extern inline void kc60se_caps_led_off(void);
 
-void led_set_kb(uint8_t usb_led) {
+void matrix_init_kb(void){
-    (usb_led & (1<<USB_LED_CAPS_LOCK))? kc60se_caps_led_on(): kc60se_caps_led_off();
+    setPinOutput(B2);
-	led_set_user(usb_led);
 }
+
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        writePin(B2, !led_state.caps_lock);
+    }
+    return res;
+}
+

keyboards/kc60se/kc60se.h

@@ -13,28 +13,20 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef KC60SE_H
+
-#define KC60SE_H
+#pragma once
 
 #include "quantum.h"
 
-// readability
 #define ___ KC_NO
 
-inline void kc60se_caps_led_on(void)  { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
+// clang-format off
-inline void kc60se_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+#define LAYOUT_all( \
-
+      K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \
-/* kc60se keymap definition macro
+      K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- * K2C, K31 and  K3C are keys for ISO
+      K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
- * This is the row/column wiring, which different from the physical layout.
+      K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
- */
+      K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
-// All pads defined in logical layout. The ___ in this section are padless.
-#define LAYOUT( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
-    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
 ) { \
     { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
     { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
@@ -43,13 +35,12 @@ inline void kc60se_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
     { K40, K41, K42, ___, ___, K45, ___, ___, ___, K49, K4A, K4B, K4C, K4D }  \
 }
 
-/* ANSI */
 #define LAYOUT_60_ansi( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+      K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+      K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+      K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
-    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
+      K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
-    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+      K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
 ) { \
     { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
     { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
@@ -58,17 +49,12 @@ inline void kc60se_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
     { K40, K41, K42, ___, ___, K45, ___, ___, ___, ___, K4A, K4B, K4C, K4D }  \
 }
 
-/* HHKB
- *  K2C & K31 are represented as ___, otherwise this is
- *  the best representation of the physical layout, (K49 on top right).
- *  The ___s on the space row do not have pads
- */
 #define LAYOUT_60_ansi_split_bs_rshift( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \
+      K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+      K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+      K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
-    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
+      K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
-    K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+      K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
 ) { \
     { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
     { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
@@ -76,6 +62,32 @@ inline void kc60se_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
     { K30, ___, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
     { K40, K41, K42, ___, ___, K45, ___, ___, ___, K49, K4A, K4B, K4C, K4D }  \
 }
+#define LAYOUT_60_iso( \
+      K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+      K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      \
+      K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+      K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
+      K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+){ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, ___ }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, ___, K3D }, \
+    { K40, K41, K42, ___, ___, K45, ___, ___, ___, ___, K4A, K4B, K4C, K4D }  \
+}
 
-
+#define LAYOUT_60_iso_split_bs_rshift( \
-#endif
+      K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, k49, \
+      K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      \
+      K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+      K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
+      K40, K41, K42,           K45,                     K4A, K4B, K4C, K4D  \
+){ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, ___ }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \
+    { K40, K41, K42, ___, ___, K45, ___, ___, ___, k49, K4A, K4B, K4C, K4D }  \
+}
+#define LAYOUT LAYOUT_all
+// clang-format on

keyboards/kc60se/keymaps/60_ansi/keymap.c

@@ -0,0 +1,66 @@
+/* Copyright 2020 Blake C. Lewis
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+/* ANSI */
+
+enum my_layers { _BL, _FL };
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    // clang-format off
+    [_BL] = LAYOUT_60_ansi(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+        KC_LGUI, KC_LALT, MO(_FL),                   KC_SPC,                                      KC_RALT, KC_RGUI, KC_APP,  KC_RCTL
+    ),
+    [_FL] = LAYOUT_60_ansi(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, _______, _______, _______, _______, _______, BL_ON,   BL_STEP, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   _______, KC_INS,
+        _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______,
+        _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, NK_TOGG, _______, KC_END,  KC_PGDN, KC_DOWN, _______,
+        _______, _______, _______,                   _______,                                     _______, _______, _______, _______
+    )
+    // clang-format on
+};
+
+/* BL
+ *.--------------------------------------------------------------------------.
+ *| esc|  1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 |  0 |  - |  = |backspace|
+ *|--------------------------------------------------------------------------|
+ *| tab  |  q |  w |  e |  r |  t |  y |  u |  i |  o |  p |  [ |  ] |   \   |
+ *|--------------------------------------------------------------------------|
+ *| caps  |  a |  s |  d |  f |  g |  h |  j |  k |  l |  ; |  ' | enter     |
+ *|--------------------------------------------------------------------------|
+ *| lshift  |  z |  x |  c |  v |  b |  n |  m |  , |  . |  / |  rshift      |
+ *|--------------------------------------------------------------------------|
+ *| lgui| lalt|mo(FL)|               space           |ralt |rgui | app |rctl | 
+ *'--------------------------------------------------------------------------'
+ * FL
+ *.--------------------------------------------------------------------------.
+ *|    | f1 | f2 | f3 | f4 | f5 | f6 | f7 | f8 | f9 | f10| f11| f12|  del    |
+ *|--------------------------------------------------------------------------|
+ *|      |    |    |    |    |    |blon|blup| psc|slck|paus| up |    |insert |
+ *|--------------------------------------------------------------------------|
+ *|       |    |    |    |    |    |    |    |home|pgup|left|rght|           |
+ *|--------------------------------------------------------------------------|
+ *|         |vol-|vol+|mute|    |    |NKRO|    |end |pgdn|down|              |
+ *|--------------------------------------------------------------------------|
+ *|      |     |     |                              |     |      |     |     |
+ *'--------------------------------------------------------------------------'
+ */

keyboards/kc60se/keymaps/default/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2018 REPLACE_WITH_YOUR_NAME
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/kc60se/keymaps/default/keymap.c

@@ -13,16 +13,34 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #include QMK_KEYBOARD_H
 
-#define _DEFAULT 0
+/* Happy Hacker Keyboard */
-#define _FN 1
+
+enum layer_names { _BL, _FL };
 
-#define xxxxxx KC_TRNS
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* hhkb - layer 0
+// clang-format off
- * split_bs/split_rshift/+ctrl-caplock
+    [_BL] = LAYOUT_60_ansi_split_bs_rshift(
+          KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+          KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+          KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+          KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(_FL),
+          KC_NO,   KC_LALT, MO(_FL),                   KC_SPC,                                      KC_NO,   KC_RGUI, KC_RALT, KC_NO
+    ),
+    [_FL] = LAYOUT_60_ansi_split_bs_rshift(
+        _______,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, KC_INS,
+        KC_CAPS,  BL_ON,   BL_STEP, _______, _______, NK_TOGG, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   _______, KC_DEL,
+        _______,  KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______,
+        _______,  KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, _______, _______,
+        _______,  _______,  _______,                  _______,                                     _______, KC_MSTP, _______, _______
+    )
+// clang-format on
+};
+
+/* BL
  *,--------------------------------------------------------------------------.
  *| esc|  1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 |  0 |  - |  = |  \ |  ` |
  *|--------------------------------------------------------------------------+
@@ -34,21 +52,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *|--------------------------------------------------------------------------+
  *        |lalt| fn1  |               space              | rgui  |ralt|
  *        `-----------------------------------------------------------'
- */
+ * FL
-  [_DEFAULT] = LAYOUT_60_ansi_split_bs_rshift( /* Basic QWERTY */
-      KC_ESC,  KC_1,    KC_2,    KC_3, KC_4, KC_5,   KC_6, KC_7, KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV, \
-      KC_TAB,  KC_Q,    KC_W,    KC_E, KC_R, KC_T,   KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, \
-      KC_LCTL, KC_A,    KC_S,    KC_D, KC_F, KC_G,   KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
-      KC_LSFT, KC_Z,    KC_X,    KC_C, KC_V, KC_B,   KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(_FN), \
-      xxxxxx,  KC_LALT, MO(_FN),             KC_SPC,             xxxxxx,  KC_RGUI, KC_RALT, xxxxxx \
-      ),
-
-/* split_bs/split_rshift/+ctrl-caplock - Layer 1
- *
  *,--------------------------------------------------------------------------.
  *|    | f1 | f2 | f3 | f4 | f5 | f6 | f7 | f8 | f9 | f10| f11| f12|    | ins|
  *|--------------------------------------------------------------------------+
- *| caps |blon|blup|    |    |    |    |    | psc|slck|paus| up |    |  del  |
+ *| caps |blon|blup|    |    |NKRO|    |    | psc|slck|paus| up |    |  del  |
  *|--------------------------------------------------------------------------+
  *|       |vol-|vol+|mute|    |    | *  | /  |home|pgup|left|rght|  penter   |
  *|--------------------------------------------------------------------------+
@@ -57,11 +65,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *        |    |      |                                  | stop |    |
  *        `----------------------------------------------------------'
  */
-  [_FN] = LAYOUT_60_ansi_split_bs_rshift( /* Layer 1 */
-      xxxxxx,  KC_F1,   KC_F2,   KC_F3,   KC_F4,  KC_F5,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11, KC_F12, xxxxxx,KC_INS, \
-      KC_CAPS, BL_ON,   BL_STEP, xxxxxx,  xxxxxx, xxxxxx, xxxxxx,  xxxxxx,  KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,  xxxxxx, KC_DEL, \
-      xxxxxx,  KC_VOLD, KC_VOLU, KC_MUTE, xxxxxx, xxxxxx, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,xxxxxx, \
-      xxxxxx,  KC_MPRV, KC_MPLY, KC_MNXT, xxxxxx, xxxxxx, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, xxxxxx, xxxxxx, \
-      xxxxxx,  xxxxxx,  xxxxxx,                   xxxxxx,                   xxxxxx,  KC_MSTP, xxxxxx,  xxxxxx \
-      )
-};

keyboards/kc60se/keymaps/default/readme.md

@@ -1,9 +1,32 @@
-# The default keymap for kc60se
+# HHKB:  The default keymap for KC60SE
 
-# hhkb-qwerty-wkl
+## Happy Hacker Keyboard (US layout):
-========================
+* [Esc] moves down replacing [ ~ ]
- ### layer 0 - default
+* 2u [Backspace] split into [ \ ] and [ ~ ]
-  ```
+* move [Backspace] down a row to replace [  \  ]
+* a dip switch toggles the default: Delete or Backspace, [Fn ] invokes non-default
+* 2.75u [  Shift  ] split into 1.75u [Shift] & [Fn ]
+* Control replaces Caplock, [FN ] [ Tab ] toggles Caplock, led under Control toggles w/Caplock
+* the botom row is configurable, the Meta key could be assigned a few values with dip switches, 
+* HHKB Lite2
+
+```
+    |Fn |Alt |Meta|        Space          |Meta|Alt |
+    |Fn |Meta|Alt |        Space          |ALt |Meta|
+```
+* HHKB Professional2
+
+```
+        |Alt |Fn  |        Space          |Meta|Alt |
+        |Meta|Alt |        Space          |Alt |Meta|
+        |Fn  |Alt |        Space          |Alt |Meta|
+```
+* this PCB and keymap will support up to 8 keys on the bottom row with minimal editing.
+
+
+## Base Layer
+
+```
   ,--------------------------------------------------------------------------.
   | esc|  1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 |  0 |  - |  = |  \ |  ` |
   |--------------------------------------------------------------------------|
@@ -15,13 +38,16 @@
   `--------------------------------------------------------------------------'
          |lalt| fn0   |               space              | rgui  |ralt|
          `------------------------------------------------------------'
-  ```
+```
- ### layer 1 - Q/W backlight controls: BL_ON & BL_STEP
+## Function Layer
-  ```
+* Extra keys: (mprv, mply, mnxt)
+* I think the number pad * / - and + did not come on the Professional, but did on Lite
+
+```
   ,--------------------------------------------------------------------------.
   |    | f1 | f2 | f3 | f4 | f5 | f6 | f7 | f8 | f9 | f10| f11| f12|    | ins|
   |--------------------------------------------------------------------------|
-  | caps |blon|blup|    |    |    |    |    | psc|slck|paus| up |    |  del  |
+  | caps |blon|blup|    |    |NKRO|    |    | psc|slck|paus| up |    |  del  |
   |--------------------------------------------------------------------------|
   |       |vol-|vol+|mute|    |    | *  | /  |home|pgup|left|rght| penter    |
   |--------------------------------------------------------------------------|
@@ -29,4 +55,5 @@
   `--------------------------------------------------------------------------'
           |    |      |                                  | mstop |    |
           `-----------------------------------------------------------'
-  ``` 
+``` 
+

keyboards/kc60se/readme.md

@@ -1,15 +1,61 @@
 # kc60se
 
-![kc60se](imgur.com image replace me!)
+* Keyboard Maintainer: [Blake C. Lewis](https://github.com/BlakeCLewis), [MechMerlin](https://www.github.com/mechmerlin)
+* Hardware Supported: KC60SE
+* Hardware Availability: PCB is no longer available
 
-A short description of the keyboard/project
+## Description:
+  * 60% keyboard PCB;
+  * supports ANSI, ISO, and HHKB layouts.
 
-Keyboard Maintainer: [Blake C. Lewis](https://github.com/BlakeCLewis), [MechMerlin](https://www.github.com/mechmerlin)       
-Hardware Supported: KC60 SE
-Hardware Availability: [Aliexpress](https://www.aliexpress.com/store/product/Free-shipping-GH60-PCB-KC60-SE-Fully-Programmable-For-DIY-Mechanical-Keyboard-Poker-Faceu-HHKB-Support/429151_32799437588.html?spm=2114.12010608.0.0.2995e5c0hNRgMH)   
 
-Make example for this keyboard (after setting up your build environment):
+### Enter the Bootloader
+  * As delivered, BOOTMAGIC_ENABLE = yes:
+    * unplug keyboard;
+    * while holding down 'Space' 'B', plug in USB cable and continue to hold for 8 seconds;
+    * 'lsusb' should report 'Atmel Corp. atmega32u4 DFU bootloader' instead of 'feed 6060';
+    * in bootloader LEDs are off & keyboard does not work.
+  * New firmware, BOOTMAGIC_ENABLE = lite:
+    * holding down esc while pluging in usb.
+  * Hardware way: 
+    * momentary jump pads 5 & 6 to enter bootloader;
 
+### Compile the default keymap:
     make kc60se:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+### NKRO
+  * N or 6 Key Rollover NKRO/6KRO
+  * navigating bios of computer may require 6KRO
+  * default keymap has fn(T) mapped to toggle NKRO/6KRO
+  * test: press 8 keys at same time, if 6, then 6KRO, if 8, then NKRO
+
+### DIP switches enable/disable GUI keys, the second keys from the ends on the bottom row:
+  * K41/K4C are WIN/GUI and will disrupt games;
+  * Add keycodes GUI_ON and GUI_OFF to your function layer to switch on/off GUI keys. It is eaier than flipping the dip switches;
+
+ ```
+  dip      keys
+ #1  #2  K41 K4C
+  1   1   1   1    both keys enabled
+  1   0   0   1
+  0   1   1   0
+  0   0   0   0    both keys disabled
+  ```
+### ISP header next to the ATmega32U4:
+  * if you can't get into bootloader, while keyboard is on, momentary jump pad 5 to pad 6
+
+  ```
+  2 4 6
+  : : :
+  1 3 5
+  ```
+  ```
+  1 - B3      MISO, column 13, square pad
+  2 - VCC
+  3 - B1      SCLK, column 7
+  4 - B2      MOSI, caplock led
+  5 - Reset   | momentary jump 5 and 6
+  6 - Ground  | to enter Bootloader
+  ```

keyboards/kc60se/rules.mk

@@ -13,21 +13,20 @@ BOOTLOADER = atmel-dfu
 
 # Build Options
 #   change yes to no to disable
-#
+BOOTMAGIC_ENABLE = lite     # plugin usb while holding down Esc, will toggle on NKRO and change will persist
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # default keymap does not map mouse
-MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
+CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no            # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 
-LAYOUTS = 60_ansi 60_ansi_split_bs_rshift
+LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift

keyboards/lily58/keymaps/bcat/keymap.c

@@ -25,25 +25,25 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Lower layer: http://www.keyboard-layout-editor.com/#/gists/19ad0d3b5d745fbb2818db09740f5a11 */
     [LAYER_LOWER] = LAYOUT(
         _______,  _______,  _______,  _______,  _______,  _______,                      _______,  _______,  _______,  _______,  _______,  _______,
-        KC_TILD,  KC_EXLM,  KC_AT,    KC_HASH,  KC_DLR,   KC_PERC,                      KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN,  _______,
+        KC_CAPS,  KC_EXLM,  KC_AT,    KC_HASH,  KC_DLR,   KC_PERC,                      KC_CIRC,  KC_AMPR,  KC_ASTR,  KC_LPRN,  KC_RPRN,  _______,
-        _______,  KC_PSCR,  KC_SLCK,  KC_PAUS,  KC_INS,   KC_DEL,                       KC_PIPE,  KC_UNDS,  KC_PLUS,  KC_LCBR,  KC_RCBR,  _______,
+        _______,  _______,  _______,  _______,  _______,  _______,                      KC_PIPE,  KC_UNDS,  KC_PLUS,  KC_LCBR,  KC_RCBR,  KC_TILD,
-        _______,  _______,  _______,  _______,  _______,  KC_APP,   _______,  _______,  KC_BSLS,  KC_MINS,  KC_EQL,   KC_LBRC,  KC_RBRC,  _______,
+        _______,  _______,  KC_PSCR,  KC_SLCK,  KC_PAUS,  KC_APP,   _______,  _______,  KC_BSLS,  KC_MINS,  KC_EQL,   KC_LBRC,  KC_RBRC,  KC_GRV,
                                       _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
     ),
 
     /* Raise layer: http://www.keyboard-layout-editor.com/#/gists/912be7955f781cdaf692cc4d4c0b5823 */
     [LAYER_RAISE] = LAYOUT(
         _______,  _______,  _______,  _______,  _______,  _______,                      _______,  _______,  _______,  _______,  _______,  _______,
-        KC_GRV,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,                         KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     _______,
+        _______,  KC_1,     KC_2,     KC_3,     KC_4,     KC_5,                         KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     _______,
-        _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,                        KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  KC_F11,   _______,
+        _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,                        KC_LEFT,  KC_DOWN,  KC_UP,    KC_RGHT,  KC_F11,   KC_DEL,
-        _______,  KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   _______,  _______,  KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END,   KC_F12,   _______,
+        _______,  KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   _______,  _______,  KC_HOME,  KC_PGDN,  KC_PGUP,  KC_END,   KC_F12,   KC_INS,
                                       _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______
     ),
 
     /* Adjust layer: http://www.keyboard-layout-editor.com/#/gists/8f6a3f08350a9bbe1d414b22bca4e6c7 */
     [LAYER_ADJUST] = LAYOUT(
         _______,  _______,  _______,  _______,  _______,  _______,                      _______,  _______,  _______,  _______,  _______,  _______,
-        KC_CAPS,  _______,  KC_MPLY,  KC_VOLU,  KC_MSTP,  _______,                      EEP_RST,  RESET,    _______,  _______,  _______,  _______,
+        _______,  _______,  KC_MPLY,  KC_VOLU,  KC_MSTP,  _______,                      EEP_RST,  RESET,    _______,  _______,  _______,  _______,
         _______,  _______,  KC_MPRV,  KC_VOLD,  KC_MNXT,  _______,                      _______,  _______,  _______,  _______,  _______,  _______,
         _______,  _______,  _______,  KC_MUTE,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
                                       _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______

keyboards/lily58/keymaps/bcat/readme.md

@@ -53,18 +53,18 @@ They're positioned below the parens on the Raise layer for easy recall.
 
 ## Lower layer
 
-![Lower layer layout](https://i.imgur.com/6ms2ll7.png)
+![Lower layer layout](https://i.imgur.com/d0J2lum.png)
 
 ([KLE](http://www.keyboard-layout-editor.com/#/gists/19ad0d3b5d745fbb2818db09740f5a11))
 
 ## Raise layer
 
-![Raise layer layout](https://i.imgur.com/HBowZ0w.png)
+![Raise layer layout](https://i.imgur.com/Ue8tu1v.png)
 
 ([KLE](http://www.keyboard-layout-editor.com/#/gists/912be7955f781cdaf692cc4d4c0b5823))
 
 ## Adjust layer
 
-![Adjust layer layout](https://i.imgur.com/udhzfON.png)
+![Adjust layer layout](https://i.imgur.com/Rv6jQtC.png)
 
 ([KLE](http://www.keyboard-layout-editor.com/#/gists/8f6a3f08350a9bbe1d414b22bca4e6c7))

keyboards/primekb/prime_l/config.h

@@ -1,5 +1,6 @@
 /*
 Copyright 2018 Jumail Mundekkat
+Copyright 2020 Holten Campbell
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -22,27 +23,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x4024
-#define DEVICE_VER      0x0001
 #define MANUFACTURER    PrimeKB
-#define PRODUCT         Prime_L
 #define DESCRIPTION     Custom layout keyboard
 
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 16
 
-/* Keyboard Matrix Assignments */
-#define MATRIX_ROW_PINS { D1, D0, B7, B3, B2 }
-#define MATRIX_COL_PINS { D2, D3, D5, D4, D6, D7, B4, B5, C7, C6, F7, F6, F5, F4, F1, F0 }
-#define UNUSED_PINS
-
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-#define BACKLIGHT_PIN B6
-/*#define BACKLIGHT_BREATHING*/
-#define BACKLIGHT_LEVELS 4
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 

keyboards/primekb/prime_l/keymaps/default/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2018 Jumail Mundekkat
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/primekb/prime_l/keymaps/default/keymap.c

@@ -15,12 +15,6 @@
  */
 #include QMK_KEYBOARD_H
 
-// Defines the keycodes used by our macros in process_record_user
-enum custom_keycodes {
-  QMKBEST = SAFE_RANGE,
-  QMKURL
-};
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [0] = LAYOUT(
 		KC_ESC, KC_HOME, KC_END, KC_PSCR, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PGUP, KC_BSPC, 
@@ -38,37 +32,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		BL_TOGG, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS
     )
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QMKBEST:
-      if (record->event.pressed) {
-        // when keycode QMKBEST is pressed
-        SEND_STRING("QMK is the best thing ever!");
-      } else {
-        // when keycode QMKBEST is released
-      }
-      break;
-    case QMKURL:
-      if (record->event.pressed) {
-        // when keycode QMKURL is pressed
-        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
-      } else {
-        // when keycode QMKURL is released
-      }
-      break;
-  }
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/primekb/prime_l/prime_l.c

@@ -1,4 +1,5 @@
 /* Copyright 2018 Jumail Mundekkat
+ * Copyright 2020 Holten Campbell
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,30 +15,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "prime_l.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-	led_set_user(usb_led);
-}

keyboards/primekb/prime_l/prime_l.h

@@ -1,4 +1,5 @@
 /* Copyright 2018 Jumail Mundekkat
+ * Copyright 2020 Holten Campbell
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,23 +14,13 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef PRIME_L_H
+
-#define PRIME_L_H
+#pragma once
 
 #include "quantum.h"
 
-#define LAYOUT( \
+#if defined(KEYBOARD_primekb_prime_l_v1)
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+  #include "v1.h"
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
+#elif defined(KEYBOARD_primekb_prime_l_v2)
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,    K215    , \
+  #include "v2.h"
-	K300, K301, K302, K303,       K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \
-	K400, K401, K402, K403,       K405, K406, K407, K408,       K410,       K412, K413, K414, K415  \
-) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
-	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115 }, \
-	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215 }, \
-	{ K300,  K301,  K302,  K303,  KC_NO, K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  K315 }, \
-	{ K400,  K401,  K402,  K403,  KC_NO, K405,  K406,  K407,  K408,  KC_NO, K410,  KC_NO, K412,  K413,  K414,  K415 }  \
-}
-
 #endif

keyboards/primekb/prime_l/readme.md

@@ -1,15 +1,15 @@
 # Prime_L
 
-![Prime_L](https://i.imgur.com/jUWhjOD.jpg)
+A compact layout with the footprint of your typical 65% board, featuring a left mini-numpad.
 
-A compact layout with the footprint of your typical 65% board, featuring a left mini-numpad. Pre-drilled and counter sunk holes for use with optional feet for a slight tilt. Switches are oriented so that back light LEDs are on the top of the switch.
+* Hardware Supported:
-
+  * [Prime_L V1](v1/) PCBs, ATmega32U4 (supports in-switch LEDs)
-Keyboard Maintainer: [MxBlue](https://github.com/MxBlu)  
+  * [Prime_L V2](v2/) PCBs, ATmega32U4 (no in-switch LED supports)
-Hardware Supported: Prime_L PCBs, ATMega32u4  
+* Hardware Availability: [Store Link](https://www.primekb.com)
-Hardware Availability: [Store Link](https://www.primekb.com/collections/keyboards/products/bundle-save)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make primekb/prime_l:default
+    make primekb/prime_l/v1:default
+    make primekb/prime_l/v2:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/primekb/prime_l/rules.mk

@@ -14,16 +14,16 @@ BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no        # Console for debug
+CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no        # Commands for debug and configuration
+COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
@@ -31,3 +31,5 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs
+
+DEFAULT_FOLDER = primekb/prime_l/v1

keyboards/primekb/prime_l/v1/config.h

@@ -0,0 +1,34 @@
+/*
+Copyright 2018 Jumail Mundekkat
+Copyright 2020 Holten Campbell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define DEVICE_VER      0x0001
+#define PRODUCT         Prime_L V1
+
+/* Keyboard Matrix Assignments */
+#define MATRIX_ROW_PINS { D1, D0, B7, B3, B2 }
+#define MATRIX_COL_PINS { D2, D3, D5, D4, D6, D7, B4, B5, C7, C6, F7, F6, F5, F4, F1, F0 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+/*#define BACKLIGHT_BREATHING*/
+#define BACKLIGHT_LEVELS 4

keyboards/primekb/prime_l/v1/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "Prime_L",
+  "url": "https://www.primekb.com",
+  "maintainer": "MxBlu",
+  "width": 16,
+  "height": 5,
+  "layouts": {
+      "LAYOUT": {
+          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":15, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "w":1.25}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"x":11.25, "y":2}, {"x":12.25, "y":2}, {"x":13.25, "y":2}, {"x":14.25, "y":2, "w":1.75}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3, "w":1.75}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3}, {"x":13.75, "y":3}, {"x":14.75, "y":3, "w":1.25}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4, "w":1.25}, {"x":4.25, "y":4, "w":1.25}, {"x":5.5, "y":4}, {"x":6.5, "y":4}, {"x":7.5, "y":4, "w":2}, {"x":9.5, "y":4, "w":2.25}, {"x":11.75, "y":4}, {"x":12.75, "y":4}, {"x":13.75, "y":4}, {"x":14.75, "y":4, "w":1.25}]
+      }
+  }
+}

keyboards/primekb/prime_l/v1/readme.md

@@ -0,0 +1,15 @@
+# Prime_L V1
+
+![Prime_L V1](https://i.imgur.com/jUWhjOD.jpg)
+
+A compact layout with the footprint of your typical 65% board, featuring a left mini-numpad. Pre-drilled and counter sunk holes for use with optional feet for a slight tilt. Switches are oriented so that back light LEDs are on the top of the switch.
+
+* Keyboard Maintainer: [MxBlue](https://github.com/MxBlu)
+* Hardware Supported: Prime_L V1 PCBs, ATmega32u4  
+* Hardware Availability: V1 PCB no longer produced
+
+Make example for this keyboard (after setting up your build environment):
+
+    make primekb/prime_l/v1:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/primekb/prime_l/v1/rules.mk

@@ -0,0 +1 @@
+BACKLIGHT_ENABLE = yes

keyboards/primekb/prime_l/v1/v1.h

@@ -0,0 +1,33 @@
+/* Copyright 2018 Jumail Mundekkat
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "prime_l.h"
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,    K215    , \
+	K300, K301, K302, K303,       K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, \
+	K400, K401, K402, K403,       K405, K406, K407, K408,       K410,       K412, K413, K414, K415  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114,  K115 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO, K215 }, \
+	{ K300,  K301,  K302,  K303,  KC_NO, K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  K314,  K315 }, \
+	{ K400,  K401,  K402,  K403,  KC_NO, K405,  K406,  K407,  K408,  KC_NO, K410,  KC_NO, K412,  K413,  K414,  K415 }  \
+}

keyboards/primekb/prime_l/v2/config.h

@@ -20,12 +20,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+
-#define PRODUCT_ID      0x4024
+#define DEVICE_VER      0x0002
-#define DEVICE_VER      0x0001
+#define PRODUCT         Prime_L V2
-#define MANUFACTURER    PrimeKB
-#define PRODUCT         Prime_L_V2
-#define DESCRIPTION     Custom layout keyboard
 
 /* key matrix size */
 #define MATRIX_ROWS 5
@@ -35,14 +32,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { E6, B2, B1, B0, B6 }
 #define MATRIX_COL_PINS { C6, C7, F7, F6, F5, F4, F1, F0, D4, D0, D1, D2, D3, D5, B7, B3 }
 #define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE

keyboards/primekb/prime_l/v2/readme.md

@@ -1,15 +1,15 @@
-# Prime_L_V2
+# Prime_L V2
 
-![Prime_L_V2](https://i.imgur.com/P3P6GUu.jpg)
+![Prime_L V2](https://i.imgur.com/P3P6GUu.jpg)
 
 A compact layout with the footprint of your typical 65% board, featuring a left mini-numpad.
 
 * Keyboard Maintainer: [HoltenC](https://github.com/HoltenC)
-* Hardware Supported: Prime_L_V2 PCBs, ATMega32u4
+* Hardware Supported: Prime_L V2 PCBs, ATmega32u4
 * Hardware Availability: [Store Link](https://www.primekb.com)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make primekb/prime_l_v2:default
+    make primekb/prime_l/v2:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/primekb/prime_l/v2/rules.mk

@@ -0,0 +1 @@
+BACKLIGHT_ENABLE = no

keyboards/primekb/prime_l/v2/v2.h

@@ -16,7 +16,7 @@
 
 #pragma once
 
-#include "quantum.h"
+#include "prime_l.h"
 
 #define LAYOUT( \
 	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \

keyboards/primekb/prime_l_v2/keymaps/default/keymap.c

@@ -1,34 +0,0 @@
-/* Copyright 2020 Holten Campbell
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT(
-		KC_ESC, KC_HOME, KC_END, KC_PSCR, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PGUP, KC_BSPC, 
-		KC_P7, KC_P8, KC_P9, KC_NLCK, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_PGDN, KC_BSLS, 
-		KC_P4, KC_P5, KC_P6, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, 
-		KC_P1, KC_P2, KC_P3, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, 
-		KC_ENT, KC_PDOT, KC_P0, KC_LCTL, KC_LALT, KC_LBRC, KC_RBRC, MO(1), KC_SPC, KC_MINS, KC_EQL, KC_RGUI, KC_RCTL
-    ),
-
-	[1] = LAYOUT(
-		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, 
-		KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_SCLN, KC_TRNS, 
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-		BL_TOGG, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS
-    )
-};

keyboards/primekb/prime_l_v2/keymaps/default/readme.md

@@ -1 +0,0 @@
-# The default keymap for prime_l_v2

keyboards/primekb/prime_l_v2/prime_l_v2.c

@@ -1,16 +0,0 @@
-/* Copyright 2020 Holten Campbell
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "prime_l_v2.h"

keyboards/primekb/prime_l_v2/rules.mk

@@ -1,33 +0,0 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
-MIDI_ENABLE = no            # MIDI support
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no           # Audio output on port C6
-FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs

keyboards/xd75/keymaps/buzzlighter1/config.h

@@ -0,0 +1,5 @@
+
+#pragma once
+
+#define FORCE_NKRO
+#define RGBLIGHT_SLEEP

keyboards/xd75/keymaps/buzzlighter1/keymap.c

@@ -0,0 +1,111 @@
+#include QMK_KEYBOARD_H
+
+// Layer shorthand
+#define _QW 0
+#define _FN 1
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | GESC   | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | =      | Del    | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | [      | ]      | \      | Mute   |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | TT(1)  | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      | Vol-   | Vol+   | ENTER  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | Home   | PGUP   | UP     | PGDWN  |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | LCTRL  | Prev   | Next   | LALT   |                                SPACE                         | End    | LEFT   | DOWN   | RIGHT  |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_QW] = LAYOUT_ortho_5x15( /* QWERTY */
+    KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_DEL,  KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_MUTE,
+    TT(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_VOLD, KC_VOLU, KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_HOME, KC_PGUP, KC_UP,   KC_PGDN,
+    KC_LCTL, KC_MPRV, KC_MNXT, KC_LALT, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, XXXXXXX, KC_END,  KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+
+/* FUNCTION
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | XXXXXXX| F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | _______| _______|
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | P*     | P7     | P8     | P9     | +      | NumLk  | PR SCR | SCR LK | PAUSE  | XXXXXXX| XXXXXXX| BL_DEC | BL_INC | RGB HD | RGB HI |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | _______| P4     | P5     | P6     | PENT   | CALC   | XXXXXXX| POWER  | XXXXXXX| RESET  | XXXXXXX| BL_BRTG| BL_STEP| RGB SD | RGB SI |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | P/     | P1     | P2     | P3     | -      | OS     | XXXXXXX| XXXXXXX| XXXXXXX| XXXXXXX| XXXXXXX| BL_OFF | BL_ON  | RGB VD | RGB VI |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | CPSLCK | P0     | P.     | _______|                             SPACE                            | BL_TOGG| RGB TG | RGB RMD| RGB MD |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+  [_FN] = LAYOUT_ortho_5x15( /* FUNCTION */
+    XXXXXXX, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+    KC_PAST, KC_P7,   KC_P8,   KC_P9,   KC_PPLS, KC_NLCK, KC_PSCR, KC_SLCK, KC_PAUS, XXXXXXX, XXXXXXX, BL_DEC,  BL_INC,  RGB_HUD, RGB_HUI,
+    _______, KC_P4,   KC_P5,   KC_P6,   KC_PENT, KC_CALC, XXXXXXX, KC_PWR,  XXXXXXX, RESET,   XXXXXXX, BL_BRTG, BL_STEP, RGB_SAD, RGB_SAI,
+    KC_PSLS, KC_P1,   KC_P2,   KC_P3,   KC_PMNS, KC_LWIN, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, BL_OFF,  BL_ON,   RGB_VAD, RGB_VAI,
+    KC_CAPS, KC_P0,   KC_PDOT, _______, XXXXXXX, XXXXXXX, XXXXXXX, KC_SPC,  XXXXXXX, XXXXXXX, XXXXXXX, BL_TOGG, RGB_TOG, RGB_RMOD,RGB_MOD
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        capslock_led_on();
+    } else {
+        capslock_led_off();
+    }
+}
+
+// Runs whenever there is a layer state change.
+layer_state_t layer_state_set_user(layer_state_t state) {
+  uint8_t layer = get_highest_layer(state);
+    
+  gp100_led_off();
+  //gp103_led_off();
+  
+  // turns on gp100 (top left led) for odd layers
+  if (layer & (1<<0)) gp100_led_on();
+  // turns on gp103 (top mid led) for layers 2, 6, ...
+  //if (layer & (1<<1)) gp103_led_on();
+  
+  return state;
+}

keyboards/xd75/keymaps/buzzlighter1/readme.md

@@ -0,0 +1,41 @@
+# XD75 with 7U spacebar for EN-RU gamers
+
+Standard QWERTY oriented on gamers with a Russian alternative input.
+Base layout is as close to classic layout as possible due to RU alphabet having more letters (thus the need for those extra keys remain on the right side).
+Full uncut 2x4 nav cluster.
+Caps Lock and Win keys sent to the Function layer.
+TT(1) - Function layer tap-toggle at CapsLock position provides fast F-keys access in a heat of a battle. As well as easy access to a Numpad.
+
+/* QWERTY
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | GESC   | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | =      | Del    | BACKSP |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | [      | ]      | \      | Mute   |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+ * | TT(1)  | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | ''     | Vol-   | Vol+   | ENTER  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | Home   | PGUP   | UP     | PGDWN  |
+ * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * | LCTRL  | Prev   | Next   | LALT   |                                SPACE                         | End    | LEFT   | DOWN   | RIGHT  |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+/* FUNCTION
+ * .--------------------------------------------------------------------------------------------------------------------------------------.
+ * | XXXXXXX| F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | _______| _______|
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | P*     | P7     | P8     | P9     | +      | NumLk  | PR SCR | SCR LK | PAUSE  | XXXXXXX| XXXXXXX| BL_DEC | BL_INC | RGB HD | RGB HI |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | _______| P4     | P5     | P6     | PENT   | CALC   | XXXXXXX| POWER  | XXXXXXX| RESET  | XXXXXXX| BL_BRTG| BL_STEP| RGB SD | RGB SI |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | P/     | P1     | P2     | P3     | -      | OS     | XXXXXXX| XXXXXXX| XXXXXXX| XXXXXXX| XXXXXXX| BL_OFF | BL_ON  | RGB VD | RGB VI |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | CPSLCK | P0     | P.     | _______|                             SPACE                            | BL_TOGG| RGB TG | RGB RMD| RGB MD |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
+
+## LED control
+
+Top left LED - Function layer active.
+Mid left LED - CapsLock active.

keyboards/xd75/keymaps/buzzlighter1/rules.mk

@@ -0,0 +1,4 @@
+
+BOOTMAGIC_ENABLE = lite
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = no

quantum/matrix.c

@@ -16,7 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include <stdint.h>
 #include <stdbool.h>
-#include "wait.h"
 #include "util.h"
 #include "matrix.h"
 #include "debounce.h"
@@ -94,7 +93,7 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
 
     // Select row and wait for row selecton to stabilize
     select_row(current_row);
-    wait_us(30);
+    matrix_io_delay();
 
     // For each col...
     for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
@@ -138,7 +137,7 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
 
     // Select col and wait for col selecton to stabilize
     select_col(current_col);
-    wait_us(30);
+    matrix_io_delay();
 
     // For each row...
     for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) {

quantum/matrix_common.c

@@ -1,8 +1,13 @@
 #include "matrix.h"
 #include "debounce.h"
+#include "wait.h"
 #include "print.h"
 #include "debug.h"
 
+#ifndef MATRIX_IO_DELAY
+#    define MATRIX_IO_DELAY 30
+#endif
+
 /* matrix state(1:on, 0:off) */
 matrix_row_t raw_matrix[MATRIX_ROWS];
 matrix_row_t matrix[MATRIX_ROWS];
@@ -78,6 +83,8 @@ uint8_t matrix_key_count(void) {
     return count;
 }
 
+__attribute__((weak)) void matrix_io_delay(void) { wait_us(MATRIX_IO_DELAY); }
+
 // CUSTOM MATRIX 'LITE'
 __attribute__((weak)) void matrix_init_custom(void) {}
 

quantum/split_common/matrix.c

@@ -16,7 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include <stdint.h>
 #include <stdbool.h>
-#include "wait.h"
 #include "util.h"
 #include "matrix.h"
 #include "debounce.h"
@@ -111,7 +110,7 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
 
     // Select row and wait for row selecton to stabilize
     select_row(current_row);
-    wait_us(30);
+    matrix_io_delay();
 
     // For each col...
     for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
@@ -155,7 +154,7 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
 
     // Select col and wait for col selecton to stabilize
     select_col(current_col);
-    wait_us(30);
+    matrix_io_delay();
 
     // For each row...
     for (uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) {

tmk_core/common/matrix.h

@@ -66,6 +66,8 @@ bool matrix_is_on(uint8_t row, uint8_t col);
 matrix_row_t matrix_get_row(uint8_t row);
 /* print matrix for debug */
 void matrix_print(void);
+/* delay between changing matrix pin state and reading values */
+void matrix_io_delay(void);
 
 /* power control */
 void matrix_power_up(void);