fix list_keymaps for python 3.5

Clean up checks and logics that are unnecessary due to MILC updates.
Use pathlib instead of os.path for readability.
Use the 'pytest' keyboard for the tests.
Add community layout for 'handwired/onekey/pytest' so we can test
community layouts.

docs/cli.md

@@ -252,6 +252,16 @@ This command lists all the keyboards currently defined in `qmk_firmware`
 qmk list-keyboards
 ```
 
+## `qmk list-keymaps`
+
+This command lists all the keymaps for a specified keyboard (and revision).
+
+**Usage**:
+
+```
+qmk list-keymaps -kb planck/ez
+```
+
 ## `qmk new-keymap`
 
 This command creates a new keymap based on a keyboard's existing default keymap.

drivers/boards/GENERIC_STM32_F072XB/board.c

@@ -0,0 +1,97 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#    if STM32_HAS_GPIOA
+    {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
+#    endif
+#    if STM32_HAS_GPIOB
+    {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
+#    endif
+#    if STM32_HAS_GPIOC
+    {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
+#    endif
+#    if STM32_HAS_GPIOD
+    {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
+#    endif
+#    if STM32_HAS_GPIOE
+    {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
+#    endif
+#    if STM32_HAS_GPIOF
+    {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
+#    endif
+#    if STM32_HAS_GPIOG
+    {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
+#    endif
+#    if STM32_HAS_GPIOH
+    {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
+#    endif
+#    if STM32_HAS_GPIOI
+    {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+#    endif
+};
+#endif
+
+__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {}
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+    enter_bootloader_mode_if_requested();
+    stm32_clock_init();
+}
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+    (void)mmcp;
+    /* TODO: Fill the implementation.*/
+    return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+    (void)mmcp;
+    /* TODO: Fill the implementation.*/
+    return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {}

drivers/boards/GENERIC_STM32_F072XB/board.h

@@ -0,0 +1,386 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for Generic STM32_F072 Board
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F072XB
+#define BOARD_NAME "STM32_F072"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: LSE not fitted.
+ * NOTE: HSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#    define STM32_LSECLK 0U
+#endif
+
+#define STM32_LSEDRV (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#    define STM32_HSECLK 0U
+#endif
+
+#define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F072xB
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON 0U
+#define GPIOA_PIN1 1U
+#define GPIOA_PIN2 2U
+#define GPIOA_PIN3 3U
+#define GPIOA_PIN4 4U
+#define GPIOA_PIN5 5U
+#define GPIOA_PIN6 6U
+#define GPIOA_PIN7 7U
+#define GPIOA_PIN8 8U
+#define GPIOA_PIN9 9U
+#define GPIOA_PIN10 10U
+#define GPIOA_USB_DM 11U
+#define GPIOA_USB_DP 12U
+#define GPIOA_SWDIO 13U
+#define GPIOA_SWCLK 14U
+#define GPIOA_PIN15 15U
+
+#define GPIOB_PIN0 0U
+#define GPIOB_PIN1 1U
+#define GPIOB_PIN2 2U
+#define GPIOB_PIN3 3U
+#define GPIOB_PIN4 4U
+#define GPIOB_PIN5 5U
+#define GPIOB_PIN6 6U
+#define GPIOB_PIN7 7U
+#define GPIOB_PIN8 8U
+#define GPIOB_PIN9 9U
+#define GPIOB_PIN10 10U
+#define GPIOB_PIN11 11U
+#define GPIOB_PIN12 12U
+#define GPIOB_SPI2_SCK 13U
+#define GPIOB_SPI2_MISO 14U
+#define GPIOB_SPI2_MOSI 15U
+
+#define GPIOC_MEMS_CS 0U
+#define GPIOC_PIN1 1U
+#define GPIOC_PIN2 2U
+#define GPIOC_PIN3 3U
+#define GPIOC_PIN4 4U
+#define GPIOC_PIN5 5U
+#define GPIOC_LED_RED 6U
+#define GPIOC_LED_BLUE 7U
+#define GPIOC_LED_ORANGE 8U
+#define GPIOC_LED_GREEN 9U
+#define GPIOC_PIN10 10U
+#define GPIOC_PIN11 11U
+#define GPIOC_PIN12 12U
+#define GPIOC_PIN13 13U
+#define GPIOC_OSC32_IN 14U
+#define GPIOC_OSC32_OUT 15U
+
+#define GPIOD_PIN0 0U
+#define GPIOD_PIN1 1U
+#define GPIOD_PIN2 2U
+#define GPIOD_PIN3 3U
+#define GPIOD_PIN4 4U
+#define GPIOD_PIN5 5U
+#define GPIOD_PIN6 6U
+#define GPIOD_PIN7 7U
+#define GPIOD_PIN8 8U
+#define GPIOD_PIN9 9U
+#define GPIOD_PIN10 10U
+#define GPIOD_PIN11 11U
+#define GPIOD_PIN12 12U
+#define GPIOD_PIN13 13U
+#define GPIOD_PIN14 14U
+#define GPIOD_PIN15 15U
+
+#define GPIOE_PIN0 0U
+#define GPIOE_PIN1 1U
+#define GPIOE_PIN2 2U
+#define GPIOE_PIN3 3U
+#define GPIOE_PIN4 4U
+#define GPIOE_PIN5 5U
+#define GPIOE_PIN6 6U
+#define GPIOE_PIN7 7U
+#define GPIOE_PIN8 8U
+#define GPIOE_PIN9 9U
+#define GPIOE_PIN10 10U
+#define GPIOE_PIN11 11U
+#define GPIOE_PIN12 12U
+#define GPIOE_PIN13 13U
+#define GPIOE_PIN14 14U
+#define GPIOE_PIN15 15U
+
+#define GPIOF_OSC_IN 0U
+#define GPIOF_OSC_OUT 1U
+#define GPIOF_PIN2 2U
+#define GPIOF_PIN3 3U
+#define GPIOF_PIN4 4U
+#define GPIOF_PIN5 5U
+#define GPIOF_PIN6 6U
+#define GPIOF_PIN7 7U
+#define GPIOF_PIN8 8U
+#define GPIOF_PIN9 9U
+#define GPIOF_PIN10 10U
+#define GPIOF_PIN11 11U
+#define GPIOF_PIN12 12U
+#define GPIOF_PIN13 13U
+#define GPIOF_PIN14 14U
+#define GPIOF_PIN15 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
+#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
+
+#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
+#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
+#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
+
+#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
+#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
+#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
+#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
+#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
+#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
+#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
+
+#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n) (0U << ((n)*2U))
+#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U))
+#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U))
+#define PIN_MODE_ANALOG(n) (3U << ((n)*2U))
+#define PIN_ODR_LOW(n) (0U << (n))
+#define PIN_ODR_HIGH(n) (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
+#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U))
+#define PIN_OSPEED_LOW(n) (1U << ((n)*2U))
+#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U))
+#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U))
+#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U))
+#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U))
+#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U))
+#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0  - BUTTON                    (input floating).
+ * PA1  - PIN1                      (input pullup).
+ * PA2  - PIN2                      (input pullup).
+ * PA3  - PIN3                      (input pullup).
+ * PA4  - PIN4                      (input pullup).
+ * PA5  - PIN5                      (input pullup).
+ * PA6  - PIN6                      (input pullup).
+ * PA7  - PIN7                      (input pullup).
+ * PA8  - PIN8                      (input pullup).
+ * PA9  - PIN9                      (input pullup).
+ * PA10 - PIN10                     (input pullup).
+ * PA11 - USB_DM                    (input floating).
+ * PA12 - USB_DP                    (input floating).
+ * PA13 - SWDIO                     (alternate 0).
+ * PA14 - SWCLK                     (alternate 0).
+ * PA15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | PIN_MODE_INPUT(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_INPUT(GPIOA_PIN4) | PIN_MODE_INPUT(GPIOA_PIN5) | PIN_MODE_INPUT(GPIOA_PIN6) | PIN_MODE_INPUT(GPIOA_PIN7) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_PIN9) | PIN_MODE_INPUT(GPIOA_PIN10) | PIN_MODE_INPUT(GPIOA_USB_DM) | PIN_MODE_INPUT(GPIOA_USB_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | PIN_OSPEED_VERYLOW(GPIOA_PIN1) | PIN_OSPEED_VERYLOW(GPIOA_PIN2) | PIN_OSPEED_VERYLOW(GPIOA_PIN3) | PIN_OSPEED_VERYLOW(GPIOA_PIN4) | PIN_OSPEED_VERYLOW(GPIOA_PIN5) | PIN_OSPEED_VERYLOW(GPIOA_PIN6) | PIN_OSPEED_VERYLOW(GPIOA_PIN7) | PIN_OSPEED_VERYLOW(GPIOA_PIN8) | PIN_OSPEED_VERYLOW(GPIOA_PIN9) | PIN_OSPEED_VERYLOW(GPIOA_PIN10) | PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | PIN_PUPDR_PULLUP(GPIOA_PIN1) | PIN_PUPDR_PULLUP(GPIOA_PIN2) | PIN_PUPDR_PULLUP(GPIOA_PIN3) | PIN_PUPDR_PULLUP(GPIOA_PIN4) | PIN_PUPDR_PULLUP(GPIOA_PIN5) | PIN_PUPDR_PULLUP(GPIOA_PIN6) | PIN_PUPDR_PULLUP(GPIOA_PIN7) | PIN_PUPDR_PULLUP(GPIOA_PIN8) | PIN_PUPDR_PULLUP(GPIOA_PIN9) | PIN_PUPDR_PULLUP(GPIOA_PIN10) | PIN_PUPDR_FLOATING(GPIOA_USB_DM) | PIN_PUPDR_FLOATING(GPIOA_USB_DP) | PIN_PUPDR_PULLUP(GPIOA_SWDIO) | PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | PIN_ODR_HIGH(GPIOA_PIN1) | PIN_ODR_HIGH(GPIOA_PIN2) | PIN_ODR_HIGH(GPIOA_PIN3) | PIN_ODR_HIGH(GPIOA_PIN4) | PIN_ODR_HIGH(GPIOA_PIN5) | PIN_ODR_HIGH(GPIOA_PIN6) | PIN_ODR_HIGH(GPIOA_PIN7) | PIN_ODR_HIGH(GPIOA_PIN8) | PIN_ODR_HIGH(GPIOA_PIN9) | PIN_ODR_HIGH(GPIOA_PIN10) | PIN_ODR_HIGH(GPIOA_USB_DM) | PIN_ODR_HIGH(GPIOA_USB_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | PIN_AFIO_AF(GPIOA_PIN1, 0U) | PIN_AFIO_AF(GPIOA_PIN2, 0U) | PIN_AFIO_AF(GPIOA_PIN3, 0U) | PIN_AFIO_AF(GPIOA_PIN4, 0U) | PIN_AFIO_AF(GPIOA_PIN5, 0U) | PIN_AFIO_AF(GPIOA_PIN6, 0U) | PIN_AFIO_AF(GPIOA_PIN7, 0U))
+#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | PIN_AFIO_AF(GPIOA_PIN9, 0U) | PIN_AFIO_AF(GPIOA_PIN10, 0U) | PIN_AFIO_AF(GPIOA_USB_DM, 0U) | PIN_AFIO_AF(GPIOA_USB_DP, 0U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0  - PIN0                      (input pullup).
+ * PB1  - PIN1                      (input pullup).
+ * PB2  - PIN2                      (input pullup).
+ * PB3  - PIN3                      (input pullup).
+ * PB4  - PIN4                      (input pullup).
+ * PB5  - PIN5                      (input pullup).
+ * PB6  - PIN6                      (input pullup).
+ * PB7  - PIN7                      (input pullup).
+ * PB8  - PIN8                      (input pullup).
+ * PB9  - PIN9                      (input pullup).
+ * PB10 - PIN10                     (input pullup).
+ * PB11 - PIN11                     (input pullup).
+ * PB12 - PIN12                     (input pullup).
+ * PB13 - SPI2_SCK                  (alternate 0).
+ * PB14 - SPI2_MISO                 (alternate 0).
+ * PB15 - SPI2_MOSI                 (alternate 0).
+ */
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_INPUT(GPIOB_PIN3) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_INPUT(GPIOB_PIN6) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_INPUT(GPIOB_PIN9) | PIN_MODE_INPUT(GPIOB_PIN10) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | PIN_OSPEED_VERYLOW(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_PIN3) | PIN_OSPEED_HIGH(GPIOB_PIN4) | PIN_OSPEED_VERYLOW(GPIOB_PIN5) | PIN_OSPEED_VERYLOW(GPIOB_PIN6) | PIN_OSPEED_VERYLOW(GPIOB_PIN7) | PIN_OSPEED_VERYLOW(GPIOB_PIN8) | PIN_OSPEED_VERYLOW(GPIOB_PIN9) | PIN_OSPEED_VERYLOW(GPIOB_PIN10) | PIN_OSPEED_VERYLOW(GPIOB_PIN11) | PIN_OSPEED_VERYLOW(GPIOB_PIN12) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_PIN3) | PIN_PUPDR_PULLUP(GPIOB_PIN4) | PIN_PUPDR_PULLUP(GPIOB_PIN5) | PIN_PUPDR_PULLUP(GPIOB_PIN6) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_PIN8) | PIN_PUPDR_PULLUP(GPIOB_PIN9) | PIN_PUPDR_PULLUP(GPIOB_PIN10) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_PIN3) | PIN_ODR_HIGH(GPIOB_PIN4) | PIN_ODR_HIGH(GPIOB_PIN5) | PIN_ODR_HIGH(GPIOB_PIN6) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_PIN8) | PIN_ODR_HIGH(GPIOB_PIN9) | PIN_ODR_HIGH(GPIOB_PIN10) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_SPI2_SCK) | PIN_ODR_HIGH(GPIOB_SPI2_MISO) | PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_PIN3, 0U) | PIN_AFIO_AF(GPIOB_PIN4, 0U) | PIN_AFIO_AF(GPIOB_PIN5, 0U) | PIN_AFIO_AF(GPIOB_PIN6, 0U) | PIN_AFIO_AF(GPIOB_PIN7, 0U))
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | PIN_AFIO_AF(GPIOB_PIN9, 0U) | PIN_AFIO_AF(GPIOB_PIN10, 0U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0  - MEMS_CS                   (output pushpull maximum).
+ * PC1  - PIN1                      (input pullup).
+ * PC2  - PIN2                      (input pullup).
+ * PC3  - PIN3                      (input pullup).
+ * PC4  - PIN4                      (input pullup).
+ * PC5  - PIN5                      (input pullup).
+ * PC6  - LED_RED                   (output pushpull maximum).
+ * PC7  - LED_BLUE                  (output pushpull maximum).
+ * PC8  - LED_ORANGE                (output pushpull maximum).
+ * PC9  - LED_GREEN                 (output pushpull maximum).
+ * PC10 - PIN10                     (input pullup).
+ * PC11 - PIN11                     (input pullup).
+ * PC12 - PIN12                     (input pullup).
+ * PC13 - PIN13                     (input pullup).
+ * PC14 - OSC32_IN                  (input floating).
+ * PC15 - OSC32_OUT                 (input floating).
+ */
+#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | PIN_MODE_INPUT(GPIOC_PIN1) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_INPUT(GPIOC_PIN3) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_OUTPUT(GPIOC_LED_RED) | PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | PIN_MODE_INPUT(GPIOC_PIN10) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_INPUT(GPIOC_PIN12) | PIN_MODE_INPUT(GPIOC_PIN13) | PIN_MODE_INPUT(GPIOC_OSC32_IN) | PIN_MODE_INPUT(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | PIN_OSPEED_VERYLOW(GPIOC_PIN1) | PIN_OSPEED_VERYLOW(GPIOC_PIN2) | PIN_OSPEED_VERYLOW(GPIOC_PIN3) | PIN_OSPEED_VERYLOW(GPIOC_PIN4) | PIN_OSPEED_VERYLOW(GPIOC_PIN5) | PIN_OSPEED_HIGH(GPIOC_LED_RED) | PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | PIN_OSPEED_VERYLOW(GPIOC_PIN10) | PIN_OSPEED_VERYLOW(GPIOC_PIN11) | PIN_OSPEED_VERYLOW(GPIOC_PIN12) | PIN_OSPEED_VERYLOW(GPIOC_PIN13) | PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | PIN_PUPDR_PULLUP(GPIOC_PIN1) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_PULLUP(GPIOC_PIN3) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_FLOATING(GPIOC_LED_RED) | PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | PIN_PUPDR_PULLUP(GPIOC_PIN10) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_PIN12) | PIN_PUPDR_PULLUP(GPIOC_PIN13) | PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | PIN_ODR_HIGH(GPIOC_PIN1) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_PIN3) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_LOW(GPIOC_LED_RED) | PIN_ODR_LOW(GPIOC_LED_BLUE) | PIN_ODR_LOW(GPIOC_LED_ORANGE) | PIN_ODR_LOW(GPIOC_LED_GREEN) | PIN_ODR_HIGH(GPIOC_PIN10) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_PIN12) | PIN_ODR_HIGH(GPIOC_PIN13) | PIN_ODR_HIGH(GPIOC_OSC32_IN) | PIN_ODR_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | PIN_AFIO_AF(GPIOC_PIN1, 0U) | PIN_AFIO_AF(GPIOC_PIN2, 0U) | PIN_AFIO_AF(GPIOC_PIN3, 0U) | PIN_AFIO_AF(GPIOC_PIN4, 0U) | PIN_AFIO_AF(GPIOC_PIN5, 0U) | PIN_AFIO_AF(GPIOC_LED_RED, 0U) | PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
+#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | PIN_AFIO_AF(GPIOC_PIN10, 0U) | PIN_AFIO_AF(GPIOC_PIN11, 0U) | PIN_AFIO_AF(GPIOC_PIN12, 0U) | PIN_AFIO_AF(GPIOC_PIN13, 0U) | PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0  - PIN0                      (input pullup).
+ * PD1  - PIN1                      (input pullup).
+ * PD2  - PIN2                      (input pullup).
+ * PD3  - PIN3                      (input pullup).
+ * PD4  - PIN4                      (input pullup).
+ * PD5  - PIN5                      (input pullup).
+ * PD6  - PIN6                      (input pullup).
+ * PD7  - PIN7                      (input pullup).
+ * PD8  - PIN8                      (input pullup).
+ * PD9  - PIN9                      (input pullup).
+ * PD10 - PIN10                     (input pullup).
+ * PD11 - PIN11                     (input pullup).
+ * PD12 - PIN12                     (input pullup).
+ * PD13 - PIN13                     (input pullup).
+ * PD14 - PIN14                     (input pullup).
+ * PD15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_INPUT(GPIOD_PIN4) | PIN_MODE_INPUT(GPIOD_PIN5) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_INPUT(GPIOD_PIN12) | PIN_MODE_INPUT(GPIOD_PIN13) | PIN_MODE_INPUT(GPIOD_PIN14) | PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | PIN_OSPEED_VERYLOW(GPIOD_PIN1) | PIN_OSPEED_VERYLOW(GPIOD_PIN2) | PIN_OSPEED_VERYLOW(GPIOD_PIN3) | PIN_OSPEED_VERYLOW(GPIOD_PIN4) | PIN_OSPEED_VERYLOW(GPIOD_PIN5) | PIN_OSPEED_VERYLOW(GPIOD_PIN6) | PIN_OSPEED_VERYLOW(GPIOD_PIN7) | PIN_OSPEED_VERYLOW(GPIOD_PIN8) | PIN_OSPEED_VERYLOW(GPIOD_PIN9) | PIN_OSPEED_VERYLOW(GPIOD_PIN10) | PIN_OSPEED_VERYLOW(GPIOD_PIN11) | PIN_OSPEED_VERYLOW(GPIOD_PIN12) | PIN_OSPEED_VERYLOW(GPIOD_PIN13) | PIN_OSPEED_VERYLOW(GPIOD_PIN14) | PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_PIN4) | PIN_PUPDR_PULLUP(GPIOD_PIN5) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_PULLUP(GPIOD_PIN12) | PIN_PUPDR_PULLUP(GPIOD_PIN13) | PIN_PUPDR_PULLUP(GPIOD_PIN14) | PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_PIN4) | PIN_ODR_HIGH(GPIOD_PIN5) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_HIGH(GPIOD_PIN12) | PIN_ODR_HIGH(GPIOD_PIN13) | PIN_ODR_HIGH(GPIOD_PIN14) | PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | PIN_AFIO_AF(GPIOD_PIN1, 0U) | PIN_AFIO_AF(GPIOD_PIN2, 0U) | PIN_AFIO_AF(GPIOD_PIN3, 0U) | PIN_AFIO_AF(GPIOD_PIN4, 0U) | PIN_AFIO_AF(GPIOD_PIN5, 0U) | PIN_AFIO_AF(GPIOD_PIN6, 0U) | PIN_AFIO_AF(GPIOD_PIN7, 0U))
+#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | PIN_AFIO_AF(GPIOD_PIN9, 0U) | PIN_AFIO_AF(GPIOD_PIN10, 0U) | PIN_AFIO_AF(GPIOD_PIN11, 0U) | PIN_AFIO_AF(GPIOD_PIN12, 0U) | PIN_AFIO_AF(GPIOD_PIN13, 0U) | PIN_AFIO_AF(GPIOD_PIN14, 0U) | PIN_AFIO_AF(GPIOD_PIN15, 0U))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0  - PIN0                      (input pullup).
+ * PE1  - PIN1                      (input pullup).
+ * PE2  - PIN2                      (input pullup).
+ * PE3  - PIN3                      (input pullup).
+ * PE4  - PIN4                      (input pullup).
+ * PE5  - PIN5                      (input pullup).
+ * PE6  - PIN6                      (input pullup).
+ * PE7  - PIN7                      (input pullup).
+ * PE8  - PIN8                      (input pullup).
+ * PE9  - PIN9                      (input pullup).
+ * PE10 - PIN10                     (input pullup).
+ * PE11 - PIN11                     (input pullup).
+ * PE12 - PIN12                     (input pullup).
+ * PE13 - PIN13                     (input pullup).
+ * PE14 - PIN14                     (input pullup).
+ * PE15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | PIN_MODE_INPUT(GPIOE_PIN1) | PIN_MODE_INPUT(GPIOE_PIN2) | PIN_MODE_INPUT(GPIOE_PIN3) | PIN_MODE_INPUT(GPIOE_PIN4) | PIN_MODE_INPUT(GPIOE_PIN5) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_INPUT(GPIOE_PIN8) | PIN_MODE_INPUT(GPIOE_PIN9) | PIN_MODE_INPUT(GPIOE_PIN10) | PIN_MODE_INPUT(GPIOE_PIN11) | PIN_MODE_INPUT(GPIOE_PIN12) | PIN_MODE_INPUT(GPIOE_PIN13) | PIN_MODE_INPUT(GPIOE_PIN14) | PIN_MODE_INPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | PIN_OSPEED_VERYLOW(GPIOE_PIN1) | PIN_OSPEED_VERYLOW(GPIOE_PIN2) | PIN_OSPEED_VERYLOW(GPIOE_PIN3) | PIN_OSPEED_VERYLOW(GPIOE_PIN4) | PIN_OSPEED_VERYLOW(GPIOE_PIN5) | PIN_OSPEED_VERYLOW(GPIOE_PIN6) | PIN_OSPEED_VERYLOW(GPIOE_PIN7) | PIN_OSPEED_VERYLOW(GPIOE_PIN8) | PIN_OSPEED_VERYLOW(GPIOE_PIN9) | PIN_OSPEED_VERYLOW(GPIOE_PIN10) | PIN_OSPEED_VERYLOW(GPIOE_PIN11) | PIN_OSPEED_VERYLOW(GPIOE_PIN12) | PIN_OSPEED_VERYLOW(GPIOE_PIN13) | PIN_OSPEED_VERYLOW(GPIOE_PIN14) | PIN_OSPEED_VERYLOW(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | PIN_PUPDR_PULLUP(GPIOE_PIN1) | PIN_PUPDR_PULLUP(GPIOE_PIN2) | PIN_PUPDR_PULLUP(GPIOE_PIN3) | PIN_PUPDR_PULLUP(GPIOE_PIN4) | PIN_PUPDR_PULLUP(GPIOE_PIN5) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_PULLUP(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_PULLUP(GPIOE_PIN13) | PIN_PUPDR_PULLUP(GPIOE_PIN14) | PIN_PUPDR_PULLUP(GPIOE_PIN15))
+#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | PIN_ODR_HIGH(GPIOE_PIN1) | PIN_ODR_HIGH(GPIOE_PIN2) | PIN_ODR_HIGH(GPIOE_PIN3) | PIN_ODR_HIGH(GPIOE_PIN4) | PIN_ODR_HIGH(GPIOE_PIN5) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_HIGH(GPIOE_PIN8) | PIN_ODR_HIGH(GPIOE_PIN9) | PIN_ODR_HIGH(GPIOE_PIN10) | PIN_ODR_HIGH(GPIOE_PIN11) | PIN_ODR_HIGH(GPIOE_PIN12) | PIN_ODR_HIGH(GPIOE_PIN13) | PIN_ODR_HIGH(GPIOE_PIN14) | PIN_ODR_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | PIN_AFIO_AF(GPIOE_PIN1, 0U) | PIN_AFIO_AF(GPIOE_PIN2, 0U) | PIN_AFIO_AF(GPIOE_PIN3, 0U) | PIN_AFIO_AF(GPIOE_PIN4, 0U) | PIN_AFIO_AF(GPIOE_PIN5, 0U) | PIN_AFIO_AF(GPIOE_PIN6, 0U) | PIN_AFIO_AF(GPIOE_PIN7, 0U))
+#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | PIN_AFIO_AF(GPIOE_PIN9, 0U) | PIN_AFIO_AF(GPIOE_PIN10, 0U) | PIN_AFIO_AF(GPIOE_PIN11, 0U) | PIN_AFIO_AF(GPIOE_PIN12, 0U) | PIN_AFIO_AF(GPIOE_PIN13, 0U) | PIN_AFIO_AF(GPIOE_PIN14, 0U) | PIN_AFIO_AF(GPIOE_PIN15, 0U))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0  - OSC_IN                    (input floating).
+ * PF1  - OSC_OUT                   (input floating).
+ * PF2  - PIN2                      (input pullup).
+ * PF3  - PIN3                      (input pullup).
+ * PF4  - PIN4                      (input pullup).
+ * PF5  - PIN5                      (input pullup).
+ * PF6  - PIN6                      (input pullup).
+ * PF7  - PIN7                      (input pullup).
+ * PF8  - PIN8                      (input pullup).
+ * PF9  - PIN9                      (input pullup).
+ * PF10 - PIN10                     (input pullup).
+ * PF11 - PIN11                     (input pullup).
+ * PF12 - PIN12                     (input pullup).
+ * PF13 - PIN13                     (input pullup).
+ * PF14 - PIN14                     (input pullup).
+ * PF15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | PIN_MODE_INPUT(GPIOF_OSC_OUT) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | PIN_OSPEED_VERYLOW(GPIOF_PIN2) | PIN_OSPEED_VERYLOW(GPIOF_PIN3) | PIN_OSPEED_VERYLOW(GPIOF_PIN4) | PIN_OSPEED_VERYLOW(GPIOF_PIN5) | PIN_OSPEED_VERYLOW(GPIOF_PIN6) | PIN_OSPEED_VERYLOW(GPIOF_PIN7) | PIN_OSPEED_VERYLOW(GPIOF_PIN8) | PIN_OSPEED_VERYLOW(GPIOF_PIN9) | PIN_OSPEED_VERYLOW(GPIOF_PIN10) | PIN_OSPEED_VERYLOW(GPIOF_PIN11) | PIN_OSPEED_VERYLOW(GPIOF_PIN12) | PIN_OSPEED_VERYLOW(GPIOF_PIN13) | PIN_OSPEED_VERYLOW(GPIOF_PIN14) | PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | PIN_ODR_HIGH(GPIOF_OSC_OUT) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | PIN_AFIO_AF(GPIOF_PIN2, 0U) | PIN_AFIO_AF(GPIOF_PIN3, 0U) | PIN_AFIO_AF(GPIOF_PIN4, 0U) | PIN_AFIO_AF(GPIOF_PIN5, 0U) | PIN_AFIO_AF(GPIOF_PIN6, 0U) | PIN_AFIO_AF(GPIOF_PIN7, 0U))
+#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | PIN_AFIO_AF(GPIOF_PIN9, 0U) | PIN_AFIO_AF(GPIOF_PIN10, 0U) | PIN_AFIO_AF(GPIOF_PIN11, 0U) | PIN_AFIO_AF(GPIOF_PIN12, 0U) | PIN_AFIO_AF(GPIOF_PIN13, 0U) | PIN_AFIO_AF(GPIOF_PIN14, 0U) | PIN_AFIO_AF(GPIOF_PIN15, 0U))
+
+#if !defined(_FROM_ASM_)
+#    ifdef __cplusplus
+extern "C" {
+#    endif
+void boardInit(void);
+#    ifdef __cplusplus
+}
+#    endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */

drivers/boards/GENERIC_STM32_F072XB/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F072XB/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F072XB

drivers/boards/GENERIC_STM32_F072XB/cfg/board.chcfg

@@ -0,0 +1,703 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- STM32F0xx board Template -->
+<board
+  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+  xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
+  <configuration_settings>
+    <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
+    <output_path>..</output_path>
+    <hal_version>3.0.x</hal_version>
+  </configuration_settings>
+  <board_name>ST STM32F072B-Discovery</board_name>
+  <board_id>ST_STM32F072B_DISCOVERY</board_id>
+  <board_functions></board_functions>
+  <subtype>STM32F072xB</subtype>
+  <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
+  	LSEBypass="false" LSEDrive="3 High Drive (default)" />
+  <ports>
+    <GPIOA>
+      <pin0
+        ID="BUTTON"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID="USB_DM"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID="USB_DP"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SWDIO"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SWCLK"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullDown"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOA>
+    <GPIOB>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID="SPI2_SCK"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin14
+        ID="SPI2_MISO"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+      <pin15
+        ID="SPI2_MOSI"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Alternate"
+        Alternate="0" />
+    </GPIOB>
+    <GPIOC>
+      <pin0
+        ID="MEMS_CS"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Output"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID="LED_RED"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin7
+        ID="LED_BLUE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin8
+        ID="LED_ORANGE"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" ></pin8>
+      <pin9
+        ID="LED_GREEN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="Low"
+        Mode="Output"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID="OSC32_IN"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID="OSC32_OUT"
+        Type="PushPull"
+        Speed="Maximum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOC>
+    <GPIOD>
+      <pin0
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOD>
+    <GPIOE>
+    	<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    	<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
+    		Level="High" Mode="Input" Alternate="0" />
+    </GPIOE>
+    <GPIOF>
+      <pin0
+        ID="OSC_IN"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin1
+        ID="OSC_OUT"
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="Floating"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin2
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin3
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin4
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin5
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin6
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin7
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin8
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin9
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin10
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin11
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin12
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin13
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin14
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+      <pin15
+        ID=""
+        Type="PushPull"
+        Speed="Minimum"
+        Resistor="PullUp"
+        Level="High"
+        Mode="Input"
+        Alternate="0" />
+    </GPIOF>
+  </ports>
+</board>

keyboards/40percentclub/luddite/config.h

@@ -3,8 +3,8 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x3430 // "40"
-#define PRODUCT_ID      0x0A0C
+#define PRODUCT_ID      0x4C55 // "LU"
 #define DEVICE_VER      0x1001
 #define MANUFACTURER    di0ib
 #define PRODUCT         Luddite

keyboards/40percentclub/luddite/keymaps/via/keymap.c

@@ -0,0 +1,35 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_60_ansi(
+    KC_GRV, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,    KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,
+    LT(1,KC_CAPS), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,      KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,         MT(MOD_RSFT,KC_UP),
+    KC_LCTL, KC_LGUI, KC_LALT ,                KC_SPC,                KC_RALT, LT(1,KC_LEFT), LT(2,KC_DOWN), MT(MOD_RCTL,KC_RGHT)
+  ),
+
+  [1] = LAYOUT_60_ansi(
+    KC_ESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+    KC_TRNS,  KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_HOME, KC_END, KC_TRNS,
+    KC_TRNS,   KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN,      KC_TRNS,
+    KC_TRNS,    KC_MPRV,  KC_MPLY, KC_MNXT, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_INS, KC_DEL,               KC_TRNS,
+    KC_TRNS,  KC_TRNS, KC_TRNS,                           KC_TRNS,                          KC_TRNS, KC_TRNS, KC_MENU, KC_TRNS
+  ),
+
+  [2] = LAYOUT_60_ansi(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_INC, BL_DEC, KC_TRNS,
+    RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
+    KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS
+  ),
+
+  [3] = LAYOUT_60_ansi(
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS
+  )
+};

keyboards/40percentclub/luddite/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/at_at/660m/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = STM32F072
+BOARD = ST_STM32F072B_DISCOVERY
 
 # Build Options
 #   comment out to disable the options.

keyboards/candybar/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = STM32F072
+BOARD = ST_STM32F072B_DISCOVERY
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/an_c/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = STM32F072
+BOARD = ST_STM32F072B_DISCOVERY
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/chimera65/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = STM32F072
+BOARD = ST_STM32F072B_DISCOVERY
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/instant60/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = STM32F072
+BOARD = ST_STM32F072B_DISCOVERY
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/iron165/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = STM32F072
+BOARD = ST_STM32F072B_DISCOVERY
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/satisfaction75/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = STM32F072
+BOARD = ST_STM32F072B_DISCOVERY
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/savage65/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = STM32F072
+BOARD = ST_STM32F072B_DISCOVERY
 
 # Build Options
 #   comment out to disable the options.

keyboards/cannonkeys/tmov2/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = STM32F072
+BOARD = ST_STM32F072B_DISCOVERY
 
 # Build Options
 #   comment out to disable the options.

keyboards/coseyfannitutti/mysterium/rules.mk

@@ -37,3 +37,5 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+LAYOUTS = tkl_ansi

keyboards/gray_studio/space65/config.h

@@ -20,12 +20,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x4753
-#define PRODUCT_ID      0x0000
+#define PRODUCT_ID      0x3000
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    Gray Studio
+#define MANUFACTURER    Graystudio
 #define PRODUCT         Space65
-#define DESCRIPTION     65% custom keyboard
+#define DESCRIPTION     Graystudio Space65
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/gray_studio/space65/keymaps/via/keymap.c

@@ -0,0 +1,47 @@
+/* Copyright 2020 Rys Sommefeldt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_DEL,
+        KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME,
+        KC_CAPS,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,           KC_PGUP,
+        KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,  KC_SPC,  KC_SPC,           KC_RALT, MO(1),                     KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______,
+        _______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,                   _______, _______, _______,          _______, _______,                   _______, _______, _______
+    ),
+    [2] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,                   _______, _______, _______,          _______, _______,                   _______, _______, _______
+    ),
+    [3] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,                   _______, _______, _______,          _______, _______,                   _______, _______, _______
+    ),
+};

keyboards/gray_studio/space65/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+MOUSEKEY_ENABLE = no

keyboards/gray_studio/think65/hotswap/config.h

@@ -20,12 +20,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x4753
-#define PRODUCT_ID      0x0000
+#define PRODUCT_ID      0x4001
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    Gray Studio
+#define MANUFACTURER    Graystudio
-#define PRODUCT         THINK6.5
+#define PRODUCT         Think6.5° Hotswap
-#define DESCRIPTION     65% 6.5 degree custom keyboard
+#define DESCRIPTION     Graystudio Think6.5 Hotswap
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/gray_studio/think65/hotswap/keymaps/via/keymap.c

@@ -0,0 +1,47 @@
+/* Copyright 2019 Rys Sommefeldt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_65_ansi_blocker(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,           KC_PGUP,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,                      KC_SPC,                          KC_RALT, MO(1),            KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_65_ansi_blocker(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+        _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,                      _______,                         _______, _______,          _______, _______, _______
+    ),
+    [2] = LAYOUT_65_ansi_blocker(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,                      _______,                         _______, _______,          _______, _______, _______
+    ),
+    [3] = LAYOUT_65_ansi_blocker(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,                      _______,                         _______, _______,          _______, _______, _______
+    ),
+};

keyboards/gray_studio/think65/hotswap/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+MOUSEKEY_ENABLE = no

keyboards/gray_studio/think65/solder/config.h

@@ -20,12 +20,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x4753
-#define PRODUCT_ID      0x0000
+#define PRODUCT_ID      0x4000
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    Gray Studio
+#define MANUFACTURER    Graystudio
-#define PRODUCT         THINK6.5
+#define PRODUCT         Think6.5°
-#define DESCRIPTION     65% 6.5 degree custom keyboard
+#define DESCRIPTION     Graystudio Think6.5
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/gray_studio/think65/solder/keymaps/via/keymap.c

@@ -0,0 +1,47 @@
+/* Copyright 2019 Rys Sommefeldt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_all(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_DEL,
+        KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME,
+        KC_CAPS,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,           KC_PGUP,
+        KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_PGDN,
+        KC_LCTL, KC_LGUI, KC_LALT,                      KC_SPC,                          KC_RALT, MO(1),                     KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_all(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______,
+        _______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,                      _______,                         _______, _______,                   _______, _______, _______
+    ),
+    [2] = LAYOUT_all(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,                      _______,                         _______, _______,                   _______, _______, _______
+    ),
+    [3] = LAYOUT_all(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,                      _______,                         _______, _______,                   _______, _______, _______
+    ),
+};

keyboards/gray_studio/think65/solder/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+MOUSEKEY_ENABLE = no

keyboards/handwired/daishi/keymaps/default/keymap.c

@@ -6,12 +6,9 @@
 
 enum custom_keycodes {
     M_EXAMPLE1 = SAFE_RANGE,
-	M_EXAMPLE2,
+	M_EXAMPLE2
-	DYNAMIC_MACRO_RANGE,
 };
 
-#include "dynamic_macro.h"
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* QWERTY
@@ -33,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 
  [_QW] = LAYOUT( /* QWERTY */
-  KC_ESC , _______, _______, _______, _______, _______, _______, _______, _______, _______,DYN_MACRO_PLAY1,DYN_MACRO_PLAY2,DYN_REC_STOP, KC_PSCR, KC_SLCK, KC_PAUS, MO(_FN), KC_MUTE,
+  KC_ESC , _______, _______, _______, _______, _______, _______, _______, _______, _______, DM_PLY1, DM_PLY2, DM_RSTP, KC_PSCR, KC_SLCK, KC_PAUS, MO(_FN), KC_MUTE,
   KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , KC_DEL , KC_HOME, KC_PGUP, KC_END , KC_INS , KC_NLCK,
   KC_GRV , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSPC, KC_PGDN, KC_PSLS, KC_PAST, KC_PMNS,
   KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSLS, KC_P7  , KC_P8  , KC_P9  , KC_PPLS,
@@ -61,7 +58,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
  
  [_FN] = LAYOUT( /* Function */
-  RESET  , KC_F13 , KC_F14 , KC_F15 , KC_F16 , KC_F17 , KC_F18 , KC_F19 , KC_F20 , KC_F21 ,DYN_REC_START1,DYN_REC_START2,DYN_REC_STOP, _______, _______, _______, MO(_FN), DEBUG,
+  RESET  , KC_F13 , KC_F14 , KC_F15 , KC_F16 , KC_F17 , KC_F18 , KC_F19 , KC_F20 , KC_F21 , DM_REC1, DM_REC2, DM_RSTP, _______, _______, _______, MO(_FN), DEBUG,
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
@@ -72,9 +69,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-	if (!process_record_dynamic_macro(keycode, record)) {
-        return false;
-    }
     if (record->event.pressed) {
         switch(keycode) {
             case M_EXAMPLE1:

keyboards/handwired/daishi/rules.mk

@@ -29,3 +29,4 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 ENCODER_ENABLE = yes		# Add rotary encoder support
+DYNAMIC_MACRO_ENABLE = yes

keyboards/handwired/onekey/rules.mk

@@ -20,3 +20,4 @@ FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
 
 DEFAULT_FOLDER = handwired/onekey/promicro
+LAYOUTS = ortho_1x1

keyboards/handwired/space_oddity/keymaps/default/keymap.c

@@ -24,9 +24,7 @@ enum custom_keycodes {
   PAIR_PR,
   PAIR_BR,
   PAIR_CB,
-  LAMBDA,
+  LAMBDA
-  DYNAMIC_MACRO_RANGE,
-
 };
 
 // Tap Dance initializer.
@@ -36,8 +34,6 @@ enum {
 
 };
 
-#include "dynamic_macro.h"
-
 // Tap dance actions - double tap for Caps Lock.
 qk_tap_dance_action_t tap_dance_actions[] = {
 
@@ -71,7 +67,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    */
 
   [0] = LAYOUT( \
-    PAIR_PR,       PAIR_BR,          PAIR_CB,          XXXXXXX,          XXXXXXX,                 DYN_MACRO_PLAY1,              DYN_MACRO_PLAY2, \
+    PAIR_PR,       PAIR_BR,          PAIR_CB,          XXXXXXX,          XXXXXXX,                 DM_PLY1,                      DM_PLY2,         \
     KC_GRV,        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,           KC_9,           KC_0,         KC_BSPC,         \
     KC_TAB,        KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,           KC_O,           KC_P,         KC_MINS,         \
     CTL_T(KC_ESC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,           KC_L,           KC_SCLN,      KC_QUOT,         \
@@ -105,8 +101,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    */
 
   [1] = LAYOUT( \
-    LAMBDA,       _______,          _______,          _______,          _______,          DYN_REC_START1,   DYN_REC_START2, \
+    LAMBDA,       _______,          _______,          _______,          _______,          DM_REC1,          DM_REC2,        \
-    DYN_REC_STOP, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LBRC, KC_P7,   KC_P8,   KC_P9,   KC_ASTR, KC_DEL,         \
+    DM_RSTP,      KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_LBRC, KC_P7,   KC_P8,   KC_P9,   KC_ASTR, KC_DEL,         \
     _______,      KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_RBRC, KC_P4,   KC_P5,   KC_P6,   KC_PLUS, KC_EQL,         \
     KC_BSLS,      KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  KC_LCBR, KC_P1,   KC_P2,   KC_P3,   KC_MINS, KC_PIPE,        \
     _______,      KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_RCBR, KC_P0,   KC_COMM, KC_DOT,  KC_SLSH, _______,        \
@@ -160,11 +156,6 @@ void matrix_scan_user(void) {
 //
 // Customize to your heart's content!
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-
-  if (!process_record_dynamic_macro(keycode, record)) {
-    return false;
-  }
-
   switch (keycode) {
 
     case PAIR_PR:

keyboards/handwired/space_oddity/rules.mk

@@ -25,3 +25,4 @@ BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = no
 TAP_DANCE_ENABLE = yes
+DYNAMIC_MACRO_ENABLE = yes

keyboards/just60/info.json

@@ -0,0 +1,77 @@
+{
+    "keyboard_name": "Just60",
+    "url": "",
+    "maintainer": "thinxer",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"Esc/`", "x":0, "y":0},
+                {"label":"1", "x":1, "y":0},
+                {"label":"2", "x":2, "y":0},
+                {"label":"3", "x":3, "y":0},
+                {"label":"4", "x":4, "y":0},
+                {"label":"5", "x":5, "y":0},
+                {"label":"6", "x":6, "y":0},
+                {"label":"7", "x":7, "y":0},
+                {"label":"8", "x":8, "y":0},
+                {"label":"9", "x":9, "y":0},
+                {"label":"0", "x":10, "y":0},
+                {"label":"-", "x":11, "y":0},
+                {"label":"=", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0, "w":2},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"[", "x":11.5, "y":1},
+                {"label":"]", "x":12.5, "y":1},
+                {"label":"\\", "x":13.5, "y":1, "w":1.5},
+                {"label":"Fn", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":";", "x":10.75, "y":2},
+                {"label":"'", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":",", "x":9.25, "y":3},
+                {"label":".", "x":10.25, "y":3},
+                {"label":"/", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":2.75},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.75},
+                {"label":"Alt", "x":1.75, "y":4, "w":1.25},
+                {"label":"GUI", "x":3, "y":4, "w":1.25},
+                {"label":"Fn/Space", "x":4.25, "y":4, "w":1.25},
+                {"label":"Space", "x":5.5, "y":4, "w":3},
+                {"label":"GUI", "x":8.5, "y":4, "w":1.25},
+                {"label":"Alt", "x":9.75, "y":4, "w":1.25},
+                {"label":"Left", "x":11, "y":4},
+                {"label":"Down", "x":12, "y":4},
+                {"label":"Up", "x":13, "y":4},
+                {"label":"Right", "x":14, "y":4}
+            ]
+        }
+    }
+}

keyboards/just60/keymaps/thinxer/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2019 Jianfei Wang
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN,
+    _COMMAND
+};
+
+#define FN_SPC LT(_FN, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base */
+    [_BASE] = LAYOUT(
+        KC_GESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL, KC_BSPC,
+         KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+        MO(_FN),    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,           KC_ENT,
+        KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,          KC_RSFT,
+        KC_LCTL, KC_LALT, KC_LGUI,  FN_SPC,           KC_SPC,          KC_RGUI, KC_RALT,          KC_LEFT, KC_DOWN,   KC_UP, KC_RGHT
+    ),
+    [_FN] = LAYOUT(
+         KC_GRV,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10, KC_F11,  KC_F12, _______,
+        KC_CAPS, KC_HOME,   KC_UP,  KC_END, KC_PGUP, _______, _______, _______, _______, _______, _______,  KC_INS,  KC_DEL, _______,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, KC_LEFT, KC_DOWN,   KC_UP, KC_RGHT, _______, _______,     MO(_COMMAND),
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______,          _______,          _______, _______,          KC_HOME, KC_PGDN, KC_PGUP,  KC_END
+     ),
+    [_COMMAND] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST,   RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______,          _______,          _______, _______,          _______, _______, _______, _______
+     )
+};

keyboards/just60/keymaps/thinxer/readme.md

@@ -0,0 +1,19 @@
+# thinxer keymap for Just60
+
+This is a duplicate of the default keymap, but for a Just60 with the QMK DFU bootloader.
+
+This layout is an ANSI layout with a Minila spacebar row.
+
+```
+ +-------------------------------------------------------------------------+
+ | ESC | 1 |  2 |  3 |  4 |  5 |  6 |  7 |  8 |  9 |  0 |  - |  = | BACKSP |
+ +-------------------------------------------------------------------------+
+ | TAB  |  Q |  W |  E |  R |  T |  Y |  U |  I |  O |  P |  [ |  ] |   \  |
+ +-------------------------------------------------------------------------+
+ | FN     |  A |  S |  D |  F |  G |  H |  J |  K |  L |  ; |  ' |  RETURN |
+ +-------------------------------------------------------------------------+
+ | LSHIFT   |  Z |  X |  C |  V |  B |  N |  M |  , |  . |  / |   RSHIFT   |
+ +-------------------------------------------------------------------------+
+ | LCMD | LALT | LGUI | FN | SPACE | RGUI | RALT | LEFT | DOWN | UP | RGHT |
+ +-------------------------------------------------------------------------+
+```

keyboards/just60/keymaps/thinxer/rules.mk

@@ -0,0 +1 @@
+BOOTLOADER = qmk-dfu

keyboards/keebio/quefrency/rev2/config.h

@@ -46,6 +46,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5
 
+#define BACKLIGHT_PIN B5
+
 /* serial.c configuration for split keyboard */
 #define SOFT_SERIAL_PIN D0
 

keyboards/preonic/keymaps/keelhauler/config.h

@@ -0,0 +1,37 @@
+#pragma once
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PREONIC_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MUSIC_MASK (keycode != KC_NO)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2

keyboards/preonic/keymaps/keelhauler/keymap.c

@@ -0,0 +1,314 @@
+/* Copyright 2015-2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "muse.h"
+
+// Tap and hold mods
+      // Enter into right shift
+  #define ENT_RSFT RSFT_T(KC_ENT)
+
+enum preonic_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+enum preonic_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  BACKLIT
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  | Alt  | PSCR |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_preonic_grid( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,  \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,   \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,  \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, ENT_RSFT, \
+  KC_LCTL, KC_LGUI, KC_LALT, KC_PSCR, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT   \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  | Alt  | PSCR |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT_preonic_grid( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,  \
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL,   \
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,  \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, ENT_RSFT, \
+  KC_LCTL, KC_LGUI, KC_LALT, KC_PSCR, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT   \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  | Alt  | PSCR |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT_preonic_grid( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,  \
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL,   \
+  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,  \
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    ENT_RSFT, \
+  KC_LCTL, KC_LGUI, KC_LALT, KC_PSCR, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT   \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      | Home | End  | Play |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Prev | Vol- | Vol+ | Next |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_preonic_grid( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, _______,  _______, KC_HOME, KC_END, KC_MPLY, \
+  _______, _______, _______, _______, _______, _______, _______, _______,  KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      | Pg Up| Pg Dn| Play |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Prev | Vol- | Vol+ | Next |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_preonic_grid( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, KC_PGUP, KC_PGDN, KC_MPLY, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT  \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_preonic_grid( \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  \
+  _______, RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL,  \
+  _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
+  _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
+)
+
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+        case QWERTY:
+          if (record->event.pressed) {
+            set_single_persistent_default_layer(_QWERTY);
+          }
+          return false;
+          break;
+        case COLEMAK:
+          if (record->event.pressed) {
+            set_single_persistent_default_layer(_COLEMAK);
+          }
+          return false;
+          break;
+        case DVORAK:
+          if (record->event.pressed) {
+            set_single_persistent_default_layer(_DVORAK);
+          }
+          return false;
+          break;
+        case LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case RAISE:
+          if (record->event.pressed) {
+            layer_on(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case BACKLIT:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+            #ifdef BACKLIGHT_ENABLE
+              backlight_step();
+            #endif
+            #ifdef __AVR__
+            writePinLow(E6);
+            #endif
+          } else {
+            unregister_code(KC_RSFT);
+            #ifdef __AVR__
+            writePinHigh(E6);
+            #endif
+          }
+          return false;
+          break;
+      }
+    return true;
+};
+
+bool muse_mode = false;
+uint8_t last_muse_note = 0;
+uint16_t muse_counter = 0;
+uint8_t muse_offset = 70;
+uint16_t muse_tempo = 50;
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (muse_mode) {
+    if (IS_LAYER_ON(_RAISE)) {
+      if (clockwise) {
+        muse_offset++;
+      } else {
+        muse_offset--;
+      }
+    } else {
+      if (clockwise) {
+        muse_tempo+=1;
+      } else {
+        muse_tempo-=1;
+      }
+    }
+  } else {
+    if (clockwise) {
+      register_code(KC_PGDN);
+      unregister_code(KC_PGDN);
+    } else {
+      register_code(KC_PGUP);
+      unregister_code(KC_PGUP);
+    }
+  }
+}
+
+void dip_switch_update_user(uint8_t index, bool active) {
+    switch (index) {
+        case 0:
+            if (active) {
+                layer_on(_ADJUST);
+            } else {
+                layer_off(_ADJUST);
+            }
+            break;
+        case 1:
+            if (active) {
+                muse_mode = true;
+            } else {
+                muse_mode = false;
+            }
+    }
+}
+
+
+void matrix_scan_user(void) {
+#ifdef AUDIO_ENABLE
+    if (muse_mode) {
+        if (muse_counter == 0) {
+            uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()];
+            if (muse_note != last_muse_note) {
+                stop_note(compute_freq_for_midi_note(last_muse_note));
+                play_note(compute_freq_for_midi_note(muse_note), 0xF);
+                last_muse_note = muse_note;
+            }
+        }
+        muse_counter = (muse_counter + 1) % muse_tempo;
+    } else {
+        if (muse_counter) {
+            stop_all_notes();
+            muse_counter = 0;
+        }
+    }
+#endif
+}
+
+bool music_mask_user(uint16_t keycode) {
+  switch (keycode) {
+    case RAISE:
+    case LOWER:
+      return false;
+    default:
+      return true;
+  }
+}

keyboards/preonic/keymaps/keelhauler/readme.md

@@ -0,0 +1,11 @@
+# Keelhauler's Preonic layout
+
+## Aims to provide a more seamless transition from a normal full-size keyboard and layout to the otholinear 50% layout of the preonic than the stock keymap.
+
+## Includes some personal touches that I find more helpful than the stock keymaps.
+
+### Base Keymap Improvements
+
+    FN key removed
+    Bottom left redesign from FN, CTRL, ALT, OS to CTRL, OS, ALT, PSCR
+    Enter functions as RShift when held, Enter when tapped

keyboards/preonic/keymaps/keelhauler/rules.mk

@@ -0,0 +1 @@
+SRC += muse.c

keyboards/projectkb/alice/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = STM32F072
+BOARD = ST_STM32F072B_DISCOVERY
 
 # Build Options
 #   comment out to disable the options.

keyboards/xiaomi/mk02/rules.mk

@@ -1,5 +1,6 @@
 # MCU name
 MCU = STM32F072
+BOARD = ST_STM32F072B_DISCOVERY
 MCU_LDSCRIPT = STM32F072_0x2000_bootloader
 
 DFU_ARGS = -d 0483:df11 -a 0 -s 0x08002000:leave

layouts/community/60_ansi_split_bs_rshift/yanfali/keymap.c

@@ -26,6 +26,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
     _______, _______,  KC_UP,   _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, RESET,          \
     KC_CAPS, KC_LEFT,  KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,                 \
-    _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                 \
+    _______, _______,  _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______,                 \
     _______, _______,  _______,             _______,                               _______, _______, _______, _______),
 };

layouts/community/60_hhkb/yanfali/keymap.c

@@ -44,7 +44,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        KC_PWR,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL, \
        _______,  RGB_TOG, KC_UP,   RGB_RMOD, BL_TOGG, BL_STEP, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS,   KC_UP, KC_TRNS, RESET,  \
        KC_CAPS,  KC_LEFT, KC_DOWN, KC_RIGHT, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT,       KC_PENT,       \
-       KC_TRNS,  RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS,  KC_END, KC_PGDN, KC_DOWN,       KC_TRNS, KC_TRNS, \
+       KC_TRNS,  RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS,  KC_MUTE, KC_VOLD, KC_VOLU,       KC_TRNS, KC_TRNS, \
                  KC_TRNS, KC_TRNS,                   KC_TRNS,                         KC_TRNS, KC_TRNS ),
 };
 

layouts/community/60_tsangan_hhkb/yanfali/keymap.c

@@ -18,7 +18,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_INS,   KC_DEL,
         _______,  _______,  KC_UP,    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  EEP_RST,  RESET,
         KC_CAPS,  KC_LEFT,  KC_DOWN,  KC_RGHT,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
-        _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+        _______,  _______,  _______,  _______,  _______,  _______,  _______,  KC_MUTE,  KC_VOLD,  KC_VOLU,  _______,  _______,  _______,
         _______,  _______,  _______,  _______,  _______,  _______,  _______
     ),
 

layouts/community/75_ansi/yanfali/keymap.c

@@ -20,6 +20,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______, _______,  _______, _______, _______,  _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______,
         BL_TOGG, BL_INC,   BL_DEC,  BL_STEP, _______,  _______,  _______, _______, _______, _______, _______, _______, EEP_RST, RESET,   _______,
         RGB_TOG, RGB_MOD,  RGB_HUI, RGB_SAI, RGB_VAI,  RGB_SPI,  _______, _______, _______, _______, _______, _______, _______, _______,
-        VLK_TOG, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD,  RGB_SPD,  _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, KC_PGUP, _______,
+        VLK_TOG, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD,  RGB_SPD,  _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, KC_PGUP, _______,
         _______, _______,  _______,          _______,            _______, _______, _______, KC_HOME, KC_PGDN, KC_END)
 };

layouts/community/ergodox/osx_neo2/config.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#undef TAPPING_TERM
+#define TAPPING_TERM 200
+
+#undef TAPPING_TOGGLE
+#define TAPPING_TOGGLE 2

layouts/community/ergodox/osx_neo2/keymap.c

@@ -5,6 +5,9 @@
 // Timer to detect tap/hold on NEO_RMOD3 key
 static uint16_t neo3_timer;
 // State bitmap to track which key(s) enabled NEO_3 layer
+// Bit 1 = LMOD state
+// Bit 2 = RMOD state
+// Bit 3 = Seen other keypress
 static uint8_t neo3_state = 0;
 // State bitmap to track key combo for CAPSLOCK
 static uint8_t capslock_state = 0;
@@ -453,6 +456,7 @@ void tap_with_modifiers(uint16_t keycode, uint8_t force_modifiers) {
 bool process_record_user_shifted(uint16_t keycode, keyrecord_t *record) {
   uint8_t active_modifiers = get_mods();
   uint8_t shifted          = active_modifiers & MOD_MASK_SHIFT;
+  uint8_t command          = active_modifiers & MOD_MASK_GUI;
 
   // Early return on key release
   if (!record->event.pressed) {
@@ -465,67 +469,81 @@ bool process_record_user_shifted(uint16_t keycode, keyrecord_t *record) {
     switch (keycode) {
       case NEO2_1:
         // degree symbol
-        SEND_STRING(SS_DOWN(X_LALT) SS_DOWN(X_LSHIFT) SS_TAP(X_8) SS_UP(X_LSHIFT) SS_UP(X_LALT));
+        tap_code16(S(A(KC_8)));
         break;
       case NEO2_2:
         // section symbol
-        SEND_STRING(SS_DOWN(X_LALT) SS_TAP(X_6) SS_UP(X_LALT));
+          tap_code16(A(KC_6));
         break;
       case NEO2_3:
-        // There is no OSX key combination for the script small l character
+        if (command) {
+          tap_code16(S(G(KC_3)));
+        } else {
+          // There is no OSX key combination for the script small l character
+        }
         break;
       case NEO2_4:
-        // right angled quote
+        if (command) {
-        SEND_STRING(SS_DOWN(X_LALT) SS_DOWN(X_LSHIFT) SS_TAP(X_BSLASH) SS_UP(X_LSHIFT) SS_UP(X_LALT));
+          tap_code16(S(G(KC_4)));
+        } else {
+          tap_code16(S(A(KC_BSLASH)));
+        }
         break;
       case NEO2_5:
-        // left angled quote
+        if (command) {
-        SEND_STRING(SS_DOWN(X_LALT) SS_TAP(X_BSLASH) SS_UP(X_LALT));
+          tap_code16(S(G(KC_5)));
+        } else {
+          // left angled quote
+          tap_code16(A(KC_BSLASH));
+        }
         break;
       case NEO2_6:
         // dollar sign
-        SEND_STRING(SS_DOWN(X_LSHIFT) SS_TAP(X_4) SS_UP(X_LSHIFT));
+        tap_code16(S(KC_4));
         break;
       case NEO2_7:
         // euro sign
-        SEND_STRING(SS_DOWN(X_LALT) SS_DOWN(X_LSHIFT) SS_TAP(X_2) SS_UP(X_LSHIFT) SS_UP(X_LALT));
+        tap_code16(S(A(KC_2)));
         break;
       case NEO2_8:
         // low9 double quote
-        SEND_STRING(SS_DOWN(X_LALT) SS_DOWN(X_LSHIFT) SS_TAP(X_W) SS_UP(X_LSHIFT) SS_UP(X_LALT));
+        tap_code16(S(A(KC_W)));
         break;
       case NEO2_9:
         // left double quote
-        SEND_STRING(SS_DOWN(X_LALT) SS_TAP(X_LBRACKET) SS_UP(X_LALT));
+        tap_code16(A(KC_LBRACKET));
         break;
       case NEO2_0:
         // right double quote
-        SEND_STRING(SS_DOWN(X_LALT) SS_DOWN(X_LSHIFT) SS_TAP(X_LBRACKET) SS_UP(X_LSHIFT) SS_UP(X_LALT));
+        tap_code16(S(A(KC_LBRACKET)));
         break;
       case NEO2_MINUS:
         // em dash
-        SEND_STRING(SS_DOWN(X_LALT) SS_DOWN(X_LSHIFT) SS_TAP(X_MINUS) SS_UP(X_LSHIFT) SS_UP(X_LALT));
+        tap_code16(S(A(KC_MINUS)));
         break;
       case NEO2_COMMA:
         // en dash
-        SEND_STRING(SS_DOWN(X_LALT) SS_TAP(X_MINUS) SS_UP(X_LALT));
+        tap_code16(A(KC_MINUS));
         break;
       case NEO2_DOT:
         // bullet
-        SEND_STRING(SS_DOWN(X_LALT) SS_TAP(X_8) SS_UP(X_LALT));
+        tap_code16(A(KC_8));
         break;
       case NEO2_SHARP_S:
         // german sharp s
-        SEND_STRING(SS_DOWN(X_LALT) SS_TAP(X_S) SS_UP(X_LALT));
+        tap_code16(S(KC_S));
         break;
       case NEO2_UE:
-        SEND_STRING(SS_DOWN(X_LALT) SS_DOWN(X_U) SS_UP(X_U) SS_UP(X_LALT) SS_DOWN(X_LSHIFT) SS_TAP(X_U) SS_UP(X_LSHIFT));
+        tap_code16(A(KC_U));
+        tap_code16(S(KC_U));
         break;
       case NEO2_OE:
-        SEND_STRING(SS_DOWN(X_LALT) SS_DOWN(X_U) SS_UP(X_U) SS_UP(X_LALT) SS_DOWN(X_LSHIFT) SS_TAP(X_O) SS_UP(X_LSHIFT));
+        tap_code16(A(KC_U));
+        tap_code16(S(KC_O));
         break;
       case NEO2_AE:
-        SEND_STRING(SS_DOWN(X_LALT) SS_DOWN(X_U) SS_UP(X_U) SS_UP(X_LALT) SS_DOWN(X_LSHIFT) SS_TAP(X_A) SS_UP(X_LSHIFT));
+        tap_code16(A(KC_U));
+        tap_code16(S(KC_A));
         break;
       default:
         set_mods(active_modifiers);
@@ -537,56 +555,59 @@ bool process_record_user_shifted(uint16_t keycode, keyrecord_t *record) {
   } else {
     switch (keycode) {
       case NEO2_1:
-        SEND_STRING(SS_TAP(X_1));
+        tap_code(KC_1);
         break;
       case NEO2_2:
-        SEND_STRING(SS_TAP(X_2));
+        tap_code(KC_2);
         break;
       case NEO2_3:
-        SEND_STRING(SS_TAP(X_3));
+        tap_code(KC_3);
         break;
       case NEO2_4:
-        SEND_STRING(SS_TAP(X_4));
+        tap_code(KC_4);
         break;
       case NEO2_5:
-        SEND_STRING(SS_TAP(X_5));
+        tap_code(KC_5);
         break;
       case NEO2_6:
-        SEND_STRING(SS_TAP(X_6));
+        tap_code(KC_6);
         break;
       case NEO2_7:
-        SEND_STRING(SS_TAP(X_7));
+        tap_code(KC_7);
         break;
       case NEO2_8:
-        SEND_STRING(SS_TAP(X_8));
+        tap_code(KC_8);
         break;
       case NEO2_9:
-        SEND_STRING(SS_TAP(X_9));
+        tap_code(KC_9);
         break;
       case NEO2_0:
-        SEND_STRING(SS_TAP(X_0));
+        tap_code(KC_0);
         break;
       case NEO2_MINUS:
-        SEND_STRING(SS_TAP(X_MINUS));
+        tap_code(KC_MINUS);
         break;
       case NEO2_COMMA:
-        SEND_STRING(SS_TAP(X_COMMA));
+        tap_code(KC_COMMA);
         break;
       case NEO2_DOT:
-        SEND_STRING(SS_TAP(X_DOT));
+        tap_code(KC_DOT);
         break;
       case NEO2_SHARP_S:
         // german sharp s
-        SEND_STRING(SS_DOWN(X_LALT) SS_TAP(X_S) SS_UP(X_LALT));
+        tap_code16(A(KC_S));
         break;
       case NEO2_UE:
-        SEND_STRING(SS_DOWN(X_LALT) SS_DOWN(X_U) SS_UP(X_U) SS_UP(X_LALT) SS_TAP(X_U));
+        tap_code16(A(KC_U));
+        tap_code(KC_U);
         break;
       case NEO2_OE:
-        SEND_STRING(SS_DOWN(X_LALT) SS_DOWN(X_U) SS_UP(X_U) SS_UP(X_LALT) SS_TAP(X_O));
+        tap_code16(A(KC_U));
+        tap_code(KC_O);
         break;
       case NEO2_AE:
-        SEND_STRING(SS_DOWN(X_LALT) SS_DOWN(X_U) SS_UP(X_U) SS_UP(X_LALT) SS_TAP(X_A));
+        tap_code16(A(KC_U));
+        tap_code(KC_A);
         break;
       default:
         return true;
@@ -619,7 +640,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         neo3_state |= (1 << 1);
       } else {
         // Turn off NEO_3 layer unless it's enabled through NEO2_RMOD3 as well.
-        if ((neo3_state & ~(1 << 1)) == 0) {
+        if ((neo3_state & (1 << 2)) == 0) {
           layer_off(NEO_3);
         }
         neo3_state &= ~(1 << 1);
@@ -629,28 +650,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       if (record->event.pressed) {
         neo3_timer = timer_read();
         neo3_state |= (1 << 2);
+        // Reset tap detection state
+        neo3_state &= ~(1 << 3);
         layer_on(NEO_3);
       } else {
         // Turn off NEO_3 layer unless it's enabled through NEO2_LMOD3 as well.
-        if ((neo3_state & ~(1 << 2)) == 0) {
+        if ((neo3_state & (1 << 1)) == 0) {
           layer_off(NEO_3);
         }
         neo3_state &= ~(1 << 2);
 
         // Was the NEO2_RMOD3 key TAPPED?
-        if (timer_elapsed(neo3_timer) <= 150) {
+        if (timer_elapsed(neo3_timer) <= TAPPING_TERM) {
-          if (neo3_state > 0) {
+          if ((neo3_state & ~(1 << 3)) > 0) {
             // We are still in NEO_3 layer, send keycode and modifiers for @
             tap_with_modifiers(KC_2, MOD_MASK_SHIFT);
             return false;
           } else {
             // Do the normal key processing, send y
-            tap_with_modifiers(KC_Y, MOD_MASK_NONE);
+            if ((neo3_state & (1 << 3)) == 0) {
+              tap_with_modifiers(KC_Y, MOD_MASK_NONE);
+            }
             return false;
           }
         }
       }
       break;
+    default:
+      if (record->event.pressed && neo3_state > 0) {
+        // Track that we've seen a separate keypress event
+        neo3_state |= (1 << 3);
+      }
+      break;
   }
 
   if ((capslock_state & MOD_MASK_SHIFT) == MOD_MASK_SHIFT) {

layouts/community/ortho_1x1/layout.json

@@ -0,0 +1 @@
+[""]

layouts/community/ortho_1x1/test/keymap.c

@@ -0,0 +1,12 @@
+#include QMK_KEYBOARD_H
+
+/* This keyboard/layout is used to test community layout discovery/compilation. */
+
+#define _DEFAULT 0
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_DEFAULT] = LAYOUT (
+    KC_B
+),
+};

layouts/community/tkl_ansi/yanfali/keymap.c

@@ -0,0 +1,25 @@
+#include QMK_KEYBOARD_H
+
+enum _layer {
+ BASE,
+ FN
+};
+
+// clang-format off
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[BASE] = LAYOUT_tkl_ansi( \
+		KC_ESC,          KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12,   KC_PSCR,KC_SLCK,KC_PAUS, \
+		KC_GRV,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,  KC_INS, KC_HOME,KC_PGUP, \
+		KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,  KC_DEL, KC_END, KC_PGDN, \
+		MT(MOD_LCTL, KC_ESC),    KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,          KC_ENT,          \
+		KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,        KC_RSFT,          KC_UP,           \
+		KC_LCTL, KC_LALT,KC_LGUI,                       KC_SPC,                          KC_RGUI,KC_RGUI,MO(FN) ,KC_RCTL,  KC_LEFT,KC_DOWN,KC_RGHT),
+	[FN] = LAYOUT_tkl_ansi( \
+		_______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,   KC_WAKE,KC_PWR, KC_SLEP, \
+		_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,EEP_RST,   _______,_______,KC_VOLU, \
+		_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET,     _______,_______,KC_VOLD, \
+		_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,                            \
+		_______,_______,_______,_______,_______,_______,_______,KC_MUTE,KC_VOLD,KC_VOLU,_______,                _______,           KC_MPLY,         \
+		_______,_______,_______,                        _______,                        _______,_______,MO(FN) ,_______,   KC_MPRV,KC_MSTP,KC_MNXT)
+};
+// clang-format on

lib/python/qmk/cli/list/__init__.py

@@ -1 +1,2 @@
 from . import keyboards
+from . import keymaps

lib/python/qmk/cli/list/keymaps.py

@@ -0,0 +1,22 @@
+"""List the keymaps for a specific keyboard
+"""
+from milc import cli
+import qmk.keymap
+from qmk.errors import NoSuchKeyboardError
+
+
+@cli.argument("-kb", "--keyboard", help="Specify keyboard name. Example: 1upkeyboards/1up60hse")
+@cli.subcommand("List the keymaps for a specific keyboard")
+def list_keymaps(cli):
+    """List the keymaps for a specific keyboard
+    """
+    try:
+        for name in qmk.keymap.list_keymaps(cli.config.list_keymaps.keyboard):
+            # We echo instead of cli.log.info to allow easier piping of this output
+            cli.echo('%s', name)
+    except NoSuchKeyboardError as e:
+        cli.echo("{fg_red}%s: %s", cli.config.list_keymaps.keyboard, e.message)
+    except (FileNotFoundError, PermissionError) as e:
+        cli.echo("{fg_red}%s: %s", cli.config.list_keymaps.keyboard, e)
+    except TypeError:
+        cli.echo("{fg_red}Something went wrong. Did you specify a keyboard?")

lib/python/qmk/keymap.py

@@ -1,8 +1,10 @@
 """Functions that help you work with QMK keymaps.
 """
 import os
+from pathlib import Path
 
 import qmk.path
+import qmk.makefile
 
 # The `keymap.c` template to use when a keyboard doesn't have its own
 DEFAULT_KEYMAP_C = """#include QMK_KEYBOARD_H
@@ -94,3 +96,39 @@ def write(keyboard, keymap, layout, layers):
         keymap_fd.write(keymap_c)
 
     return keymap_file
+
+
+def list_keymaps(keyboard_name):
+    """ List the available keymaps for a keyboard.
+
+    Args:
+        keyboard_name: the keyboards full name with vendor and revision if necessary, example: clueboard/66/rev3
+
+    Returns:
+        a set with the names of the available keymaps
+    """
+    # parse all the rules.mk files for the keyboard
+    rules_mk = qmk.makefile.get_rules_mk(keyboard_name)
+    names = set()
+
+    if rules_mk:
+        # qmk_firmware/keyboards
+        keyboards_dir = Path.cwd() / "keyboards"
+        # path to the keyboard's directory
+        kb_path = keyboards_dir / keyboard_name
+        # walk up the directory tree until keyboards_dir
+        # and collect all directories' name with keymap.c file in it
+        while kb_path != keyboards_dir:
+            keymaps_dir = kb_path / "keymaps"
+            if keymaps_dir.exists():
+                names = names.union([keymap for keymap in os.listdir(str(keymaps_dir)) if (keymaps_dir / keymap / "keymap.c").is_file()])
+            kb_path = kb_path.parent
+
+        # if community layouts are supported, get them
+        if "LAYOUTS" in rules_mk:
+            for layout in rules_mk["LAYOUTS"].split():
+                cl_path = Path.cwd() / "layouts" / "community" / layout
+                if cl_path.exists():
+                    names = names.union([keymap for keymap in os.listdir(str(cl_path)) if (cl_path / keymap / "keymap.c").is_file()])
+
+    return sorted(names)

lib/python/qmk/makefile.py

@@ -0,0 +1,83 @@
+""" Functions for working with Makefiles
+"""
+from pathlib import Path
+
+from qmk.errors import NoSuchKeyboardError
+
+
+def parse_rules_mk_file(file, rules_mk=None):
+    """Turn a rules.mk file into a dictionary.
+
+    Args:
+        file: path to the rules.mk file
+        rules_mk: already parsed rules.mk the new file should be merged with
+
+    Returns:
+        a dictionary with the file's content
+    """
+    if not rules_mk:
+        rules_mk = {}
+
+    file = Path(file)
+    if file.exists():
+        rules_mk_lines = file.read_text().split("\n")
+
+        for line in rules_mk_lines:
+            # Filter out comments
+            if line.strip().startswith("#"):
+                continue
+
+            # Strip in-line comments
+            if '#' in line:
+                line = line[:line.index('#')].strip()
+
+            if '=' in line:
+                # Append
+                if '+=' in line:
+                    key, value = line.split('+=', 1)
+                    if key.strip() not in rules_mk:
+                        rules_mk[key.strip()] = value.strip()
+                    else:
+                        rules_mk[key.strip()] += ' ' + value.strip()
+                # Set if absent
+                elif "?=" in line:
+                    key, value = line.split('?=', 1)
+                    if key.strip() not in rules_mk:
+                        rules_mk[key.strip()] = value.strip()
+                else:
+                    if ":=" in line:
+                        line.replace(":", "")
+                    key, value = line.split('=', 1)
+                    rules_mk[key.strip()] = value.strip()
+
+    return rules_mk
+
+
+def get_rules_mk(keyboard):
+    """ Get a rules.mk for a keyboard
+
+    Args:
+        keyboard: name of the keyboard
+
+    Raises:
+        NoSuchKeyboardError: when the keyboard does not exists
+
+    Returns:
+        a dictionary with the content of the rules.mk file
+    """
+    # Start with qmk_firmware/keyboards
+    kb_path = Path.cwd() / "keyboards"
+    # walk down the directory tree
+    # and collect all rules.mk files
+    kb_dir = kb_path / keyboard
+    if kb_dir.exists():
+        rules_mk = dict()
+        for directory in Path(keyboard).parts:
+            kb_path = kb_path / directory
+            rules_mk_path = kb_path / "rules.mk"
+            if rules_mk_path.exists():
+                rules_mk = parse_rules_mk_file(rules_mk_path, rules_mk)
+    else:
+        raise NoSuchKeyboardError("The requested keyboard and/or revision does not exist.")
+
+    return rules_mk

lib/python/qmk/tests/test_cli_commands.py

@@ -54,3 +54,15 @@ def test_list_keyboards():
     # check to see if a known keyboard is returned
     # this will fail if handwired/onekey/pytest is removed
     assert 'handwired/onekey/pytest' in result.stdout
+
+
+def test_list_keymaps():
+    result = check_subcommand("list-keymaps", "-kb", "handwired/onekey/pytest")
+    assert result.returncode == 0
+    assert "default" and "test" in result.stdout
+
+
+def test_list_keymaps_no_keyboard_found():
+    result = check_subcommand("list-keymaps", "-kb", "asdfghjkl")
+    assert result.returncode == 0
+    assert "does not exist" in result.stdout

quantum/mcu_selection.mk

@@ -55,7 +55,7 @@ ifneq ($(findstring STM32F072, $(MCU)),)
 
   # Board: it should exist either in <chibios>/os/hal/boards/,
   # <keyboard_dir>/boards/, or drivers/boards/
-  BOARD ?= ST_STM32F072B_DISCOVERY
+  BOARD ?= GENERIC_STM32_F072XB
 
   USE_FPU ?= no
 

quantum/split_common/matrix.c

@@ -19,10 +19,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "wait.h"
 #include "util.h"
 #include "matrix.h"
+#include "debounce.h"
+#include "quantum.h"
 #include "split_util.h"
 #include "config.h"
-#include "quantum.h"
-#include "debounce.h"
 #include "transport.h"
 
 #ifdef ENCODER_ENABLE
@@ -35,7 +35,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef DIRECT_PINS
 static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS;
-#else
+#elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
 static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
 static pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
 #endif
@@ -115,8 +115,11 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
 
     // For each col...
     for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+        // Select the col pin to read (active low)
+        uint8_t pin_state = readPin(col_pins[col_index]);
+
         // Populate the matrix row with the state of the col pin
-        current_matrix[current_row] |= readPin(col_pins[col_index]) ? 0 : (MATRIX_ROW_SHIFTER << col_index);
+        current_matrix[current_row] |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index);
     }
 
     // Unselect row
@@ -160,12 +163,12 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
         matrix_row_t last_row_value = current_matrix[row_index];
 
         // Check row pin state
-        if (readPin(row_pins[row_index])) {
+        if (readPin(row_pins[row_index]) == 0) {
-            // Pin HI, clear col bit
-            current_matrix[row_index] &= ~(MATRIX_ROW_SHIFTER << current_col);
-        } else {
             // Pin LO, set col bit
             current_matrix[row_index] |= (MATRIX_ROW_SHIFTER << current_col);
+        } else {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(MATRIX_ROW_SHIFTER << current_col);
         }
 
         // Determine if the matrix changed state

tmk_core/protocol/vusb/vusb.c

@@ -112,6 +112,7 @@ static void send_mouse(report_mouse_t *report) {
     }
 }
 
+#ifdef EXTRAKEY_ENABLE
 static void send_extra(uint8_t report_id, uint16_t data) {
     static uint8_t  last_id   = 0;
     static uint16_t last_data = 0;
@@ -124,10 +125,19 @@ static void send_extra(uint8_t report_id, uint16_t data) {
         usbSetInterrupt3((void *)&report, sizeof(report));
     }
 }
+#endif
 
-static void send_system(uint16_t data) { send_extra(REPORT_ID_SYSTEM, data); }
+static void send_system(uint16_t data) {
+#ifdef EXTRAKEY_ENABLE
+    send_extra(REPORT_ID_SYSTEM, data - SYSTEM_POWER_DOWN + 1);
+#endif
+}
 
-static void send_consumer(uint16_t data) { send_extra(REPORT_ID_CONSUMER, data); }
+static void send_consumer(uint16_t data) {
+#ifdef EXTRAKEY_ENABLE
+    send_extra(REPORT_ID_CONSUMER, data);
+#endif
+}
 
 /*------------------------------------------------------------------*
  * Request from host                                                *
@@ -200,128 +210,125 @@ uchar usbFunctionWrite(uchar *data, uchar len) {
  * Descriptors                                                      *
  *------------------------------------------------------------------*/
 
-/*
- * Report Descriptor for keyboard
- *
- * from an example in HID spec appendix
- */
 const PROGMEM uchar keyboard_hid_report[] = {
-    0x05, 0x01,        // Usage Page (Generic Desktop),
+    0x05, 0x01,  // Usage Page (Generic Desktop)
-    0x09, 0x06,        // Usage (Keyboard),
+    0x09, 0x06,  // Usage (Keyboard)
-    0xA1, 0x01,        // Collection (Application),
+    0xA1, 0x01,  // Collection (Application)
-    0x75, 0x01,        //   Report Size (1),
+    // Modifiers (8 bits)
-    0x95, 0x08,        //   Report Count (8),
+    0x05, 0x07,  //   Usage Page (Keyboard/Keypad)
-    0x05, 0x07,        //   Usage Page (Key Codes),
+    0x19, 0xE0,  //   Usage Minimum (Keyboard Left Control)
-    0x19, 0xE0,        //   Usage Minimum (224),
+    0x29, 0xE7,  //   Usage Maximum (Keyboard Right GUI)
-    0x29, 0xE7,        //   Usage Maximum (231),
+    0x15, 0x00,  //   Logical Minimum (0)
-    0x15, 0x00,        //   Logical Minimum (0),
+    0x25, 0x01,  //   Logical Maximum (1)
-    0x25, 0x01,        //   Logical Maximum (1),
+    0x95, 0x08,  //   Report Count (8)
-    0x81, 0x02,        //   Input (Data, Variable, Absolute), ;Modifier byte
+    0x75, 0x01,  //   Report Size (1)
-    0x95, 0x01,        //   Report Count (1),
+    0x81, 0x02,  //   Input (Data, Variable, Absolute)
-    0x75, 0x08,        //   Report Size (8),
+    // Reserved (1 byte)
-    0x81, 0x03,        //   Input (Constant),                 ;Reserved byte
+    0x95, 0x01,  //   Report Count (1)
-    0x95, 0x05,        //   Report Count (5),
+    0x75, 0x08,  //   Report Size (8)
-    0x75, 0x01,        //   Report Size (1),
+    0x81, 0x03,  //   Input (Constant)
-    0x05, 0x08,        //   Usage Page (LEDs),
+    // Keycodes (6 bytes)
-    0x19, 0x01,        //   Usage Minimum (1),
+    0x05, 0x07,        //   Usage Page (Keyboard/Keypad)
-    0x29, 0x05,        //   Usage Maximum (5),
+    0x19, 0x00,        //   Usage Minimum (0)
-    0x91, 0x02,        //   Output (Data, Variable, Absolute), ;LED report
+    0x29, 0xFF,        //   Usage Maximum (255)
-    0x95, 0x01,        //   Report Count (1),
+    0x15, 0x00,        //   Logical Minimum (0)
-    0x75, 0x03,        //   Report Size (3),
+    0x26, 0xFF, 0x00,  //   Logical Maximum (255)
-    0x91, 0x03,        //   Output (Constant),                 ;LED report padding
+    0x95, 0x06,        //   Report Count (6)
-    0x95, 0x06,        //   Report Count (6),
+    0x75, 0x08,        //   Report Size (8)
-    0x75, 0x08,        //   Report Size (8),
+    0x81, 0x00,        //   Input (Data, Array, Absolute)
-    0x15, 0x00,        //   Logical Minimum (0),
+
-    0x26, 0xFF, 0x00,  //   Logical Maximum(255),
+    // Status LEDs (5 bits)
-    0x05, 0x07,        //   Usage Page (Key Codes),
+    0x05, 0x08,  //   Usage Page (LED)
-    0x19, 0x00,        //   Usage Minimum (0),
+    0x19, 0x01,  //   Usage Minimum (Num Lock)
-    0x29, 0xFF,        //   Usage Maximum (255),
+    0x29, 0x05,  //   Usage Maximum (Kana)
-    0x81, 0x00,        //   Input (Data, Array),
+    0x95, 0x05,  //   Report Count (5)
-    0xc0               // End Collection
+    0x75, 0x01,  //   Report Size (1)
+    0x91, 0x02,  //   Output (Data, Variable, Absolute)
+    // LED padding (3 bits)
+    0x95, 0x01,  //   Report Count (1)
+    0x75, 0x03,  //   Report Size (3)
+    0x91, 0x03,  //   Output (Constant)
+    0xC0         // End Collection
 };
 
-/*
- * Report Descriptor for mouse
- *
- * Mouse Protocol 1, HID 1.11 spec, Appendix B, page 59-60, with wheel extension
- * http://www.microchip.com/forums/tm.aspx?high=&m=391435&mpage=1#391521
- * http://www.keil.com/forum/15671/
- * http://www.microsoft.com/whdc/device/input/wheel.mspx
- */
 const PROGMEM uchar mouse_hid_report[] = {
-    /* mouse */
+    // Mouse report descriptor
-    0x05, 0x01,             // USAGE_PAGE (Generic Desktop)
+    0x05, 0x01,             // Usage Page (Generic Desktop)
-    0x09, 0x02,             // USAGE (Mouse)
+    0x09, 0x02,             // Usage (Mouse)
-    0xa1, 0x01,             // COLLECTION (Application)
+    0xA1, 0x01,             // Collection (Application)
-    0x85, REPORT_ID_MOUSE,  //   REPORT_ID (1)
+    0x85, REPORT_ID_MOUSE,  //   Report ID
-    0x09, 0x01,             //   USAGE (Pointer)
+    0x09, 0x01,             //   Usage (Pointer)
-    0xa1, 0x00,             //   COLLECTION (Physical)
+    0xA1, 0x00,             //   Collection (Physical)
-                            // ----------------------------  Buttons
+    // Buttons (5 bits)
-    0x05, 0x09,             //     USAGE_PAGE (Button)
+    0x05, 0x09,  //     Usage Page (Button)
-    0x19, 0x01,             //     USAGE_MINIMUM (Button 1)
+    0x19, 0x01,  //     Usage Minimum (Button 1)
-    0x29, 0x05,             //     USAGE_MAXIMUM (Button 5)
+    0x29, 0x05,  //     Usage Maximum (Button 5)
-    0x15, 0x00,             //     LOGICAL_MINIMUM (0)
+    0x15, 0x00,  //     Logical Minimum (0)
-    0x25, 0x01,             //     LOGICAL_MAXIMUM (1)
+    0x25, 0x01,  //     Logical Maximum (1)
-    0x75, 0x01,             //     REPORT_SIZE (1)
+    0x95, 0x05,  //     Report Count (5)
-    0x95, 0x05,             //     REPORT_COUNT (5)
+    0x75, 0x01,  //     Report Size (1)
-    0x81, 0x02,             //     INPUT (Data,Var,Abs)
+    0x81, 0x02,  //     Input (Data, Variable, Absolute)
-    0x75, 0x03,             //     REPORT_SIZE (3)
+    // Button padding (3 bits)
-    0x95, 0x01,             //     REPORT_COUNT (1)
+    0x95, 0x01,  //     Report Count (1)
-    0x81, 0x03,             //     INPUT (Cnst,Var,Abs)
+    0x75, 0x03,  //     Report Size (3)
-                            // ----------------------------  X,Y position
+    0x81, 0x03,  //     Input (Constant)
-    0x05, 0x01,             //     USAGE_PAGE (Generic Desktop)
+
-    0x09, 0x30,             //     USAGE (X)
+    // X/Y position (2 bytes)
-    0x09, 0x31,             //     USAGE (Y)
+    0x05, 0x01,  //     Usage Page (Generic Desktop)
-    0x15, 0x81,             //     LOGICAL_MINIMUM (-127)
+    0x09, 0x30,  //     Usage (X)
-    0x25, 0x7f,             //     LOGICAL_MAXIMUM (127)
+    0x09, 0x31,  //     Usage (Y)
-    0x75, 0x08,             //     REPORT_SIZE (8)
+    0x15, 0x81,  //     Logical Minimum (-127)
-    0x95, 0x02,             //     REPORT_COUNT (2)
+    0x25, 0x7F,  //     Logical Maximum (127)
-    0x81, 0x06,             //     INPUT (Data,Var,Rel)
+    0x95, 0x02,  //     Report Count (2)
-                            // ----------------------------  Vertical wheel
+    0x75, 0x08,  //     Report Size (8)
-    0x09, 0x38,             //     USAGE (Wheel)
+    0x81, 0x06,  //     Input (Data, Variable, Relative)
-    0x15, 0x81,             //     LOGICAL_MINIMUM (-127)
+
-    0x25, 0x7f,             //     LOGICAL_MAXIMUM (127)
+    // Vertical wheel (1 byte)
-    0x35, 0x00,             //     PHYSICAL_MINIMUM (0)        - reset physical
+    0x09, 0x38,  //     Usage (Wheel)
-    0x45, 0x00,             //     PHYSICAL_MAXIMUM (0)
+    0x15, 0x81,  //     Logical Minimum (-127)
-    0x75, 0x08,             //     REPORT_SIZE (8)
+    0x25, 0x7F,  //     Logical Maximum (127)
-    0x95, 0x01,             //     REPORT_COUNT (1)
+    0x95, 0x01,  //     Report Count (1)
-    0x81, 0x06,             //     INPUT (Data,Var,Rel)
+    0x75, 0x08,  //     Report Size (8)
-                            // ----------------------------  Horizontal wheel
+    0x81, 0x06,  //     Input (Data, Variable, Relative)
-    0x05, 0x0c,             //     USAGE_PAGE (Consumer Devices)
+    // Horizontal wheel (1 byte)
-    0x0a, 0x38, 0x02,       //     USAGE (AC Pan)
+    0x05, 0x0C,        //     Usage Page (Consumer)
-    0x15, 0x81,             //     LOGICAL_MINIMUM (-127)
+    0x0A, 0x38, 0x02,  //     Usage (AC Pan)
-    0x25, 0x7f,             //     LOGICAL_MAXIMUM (127)
+    0x15, 0x81,        //     Logical Minimum (-127)
-    0x75, 0x08,             //     REPORT_SIZE (8)
+    0x25, 0x7F,        //     Logical Maximum (127)
-    0x95, 0x01,             //     REPORT_COUNT (1)
+    0x95, 0x01,        //     Report Count (1)
-    0x81, 0x06,             //     INPUT (Data,Var,Rel)
+    0x75, 0x08,        //     Report Size (8)
-    0xc0,                   //   END_COLLECTION
+    0x81, 0x06,        //     Input (Data, Variable, Relative)
-    0xc0,                   // END_COLLECTION
+    0xC0,              //   End Collection
-    /* system control */
+    0xC0,              // End Collection
-    0x05, 0x01,              // USAGE_PAGE (Generic Desktop)
+
-    0x09, 0x80,              // USAGE (System Control)
+#ifdef EXTRAKEY_ENABLE
-    0xa1, 0x01,              // COLLECTION (Application)
+    // Extrakeys report descriptor
-    0x85, REPORT_ID_SYSTEM,  //   REPORT_ID (2)
+    0x05, 0x01,              // Usage Page (Generic Desktop)
-    0x15, 0x01,              //   LOGICAL_MINIMUM (0x1)
+    0x09, 0x80,              // Usage (System Control)
-    0x26, 0xb7, 0x00,        //   LOGICAL_MAXIMUM (0xb7)
+    0xA1, 0x01,              // Collection (Application)
-    0x19, 0x01,              //   USAGE_MINIMUM (0x1)
+    0x85, REPORT_ID_SYSTEM,  //   Report ID
-    0x29, 0xb7,              //   USAGE_MAXIMUM (0xb7)
+    0x1A, 0x81, 0x00,        //   Usage Minimum (System Power Down)
-    0x75, 0x10,              //   REPORT_SIZE (16)
+    0x2A, 0x83, 0x00,        //   Usage Maximum (System Wake Up)
-    0x95, 0x01,              //   REPORT_COUNT (1)
+    0x16, 0x01, 0x00,        //   Logical Minimum
-    0x81, 0x00,              //   INPUT (Data,Array,Abs)
+    0x26, 0x03, 0x00,        //   Logical Maximum
-    0xc0,                    // END_COLLECTION
+    0x95, 0x01,              //   Report Count (1)
-    /* consumer */
+    0x75, 0x10,              //   Report Size (16)
-    0x05, 0x0c,                // USAGE_PAGE (Consumer Devices)
+    0x81, 0x00,              //   Input (Data, Array, Absolute)
-    0x09, 0x01,                // USAGE (Consumer Control)
+    0xC0,                    // End Collection
-    0xa1, 0x01,                // COLLECTION (Application)
+
-    0x85, REPORT_ID_CONSUMER,  //   REPORT_ID (3)
+    0x05, 0x0C,                // Usage Page (Consumer)
-    0x15, 0x01,                //   LOGICAL_MINIMUM (0x1)
+    0x09, 0x01,                // Usage (Consumer Control)
-    0x26, 0x9c, 0x02,          //   LOGICAL_MAXIMUM (0x29c)
+    0xA1, 0x01,                // Collection (Application)
-    0x19, 0x01,                //   USAGE_MINIMUM (0x1)
+    0x85, REPORT_ID_CONSUMER,  //   Report ID
-    0x2a, 0x9c, 0x02,          //   USAGE_MAXIMUM (0x29c)
+    0x1A, 0x01, 0x00,          //   Usage Minimum (Consumer Control)
-    0x75, 0x10,                //   REPORT_SIZE (16)
+    0x2A, 0x9C, 0x02,          //   Usage Maximum (AC Distribute Vertically)
-    0x95, 0x01,                //   REPORT_COUNT (1)
+    0x16, 0x01, 0x00,          //   Logical Minimum
-    0x81, 0x00,                //   INPUT (Data,Array,Abs)
+    0x26, 0x9C, 0x02,          //   Logical Maximum
-    0xc0,                      // END_COLLECTION
+    0x95, 0x01,                //   Report Count (1)
+    0x75, 0x10,                //   Report Size (16)
+    0x81, 0x00,                //   Input (Data, Array, Absolute)
+    0xC0                       // End Collection
+#endif
 };
 
 #ifndef USB_MAX_POWER_CONSUMPTION

users/yanfali/rules.mk

@@ -3,14 +3,25 @@ DYNAMIC_KEYMAP_ENABLE = no
 CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 LINK_TIME_OPTIMIZATION_ENABLE = yes
+AUDIO_ENABLE = no
 
 # only enable audio on specific boards
 ifeq ($(strip $(KEYBOARD)), maartenwut/plain60)
     AUDIO_ENABLE = yes
-else
+endif
-    AUDIO_ENABLE = no
+
+ifeq ($(strip $(KEYBOARD)), clueboard/60)
+    AUDIO_ENABLE = yes
+endif
+
+ifeq ($(strip $(KEYBOARD)), hadron/ver3)
+    AUDIO_ENABLE = yes
 endif
 
 ifeq ($(strip $(KEYBOARD)), fruity60)
     COMMAND_ENABLE = no
 endif
+
+ifeq ($(strip $(KEYBOARD)), kbdfans/kbd75/rev1)
+    COMMAND_ENABLE = no
+endif