[Keyboard] Cospad refactor (#7957)

* Cospad refactor

* Add num lock indicator code

* Add led_init_ports()

* Revert change to matrix position blanks

* Define BACKLIGHT_ON_STATE explicitly, in anticipation of PR6749

keyboards/cospad/config.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2012 Jun Wako <[email protected]>
+Copyright 2020
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -21,11 +21,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
+#define PRODUCT_ID      0xB1E5
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    KPREPUBLIC
+#define MANUFACTURER    KPrepublic
-#define PRODUCT         COSPAD
+#define PRODUCT         Cospad
-#define DESCRIPTION     QMK keyboard firmware for COSPAD
+#define DESCRIPTION     6x4 numpad with underglow and backlighting
 
 /* key matrix size */
 #define MATRIX_ROWS 6
@@ -40,22 +40,51 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  *
-*/
+ */
 #define MATRIX_ROW_PINS { D0, D1, D2, D3, D4, D5 }
 #define MATRIX_COL_PINS { F0, F1, E6, C7 }
 #define UNUSED_PINS
 
-/* COL2ROW or ROW2COL */
+/* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Backlight configuration */
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
 #define BACKLIGHT_PIN F7
-#define BACKLIGHT_LEVELS 1
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+#define BACKLIGHT_ON_STATE 0
 
-/* Underlight configuration */
 #define RGB_DI_PIN F6
-#define RGBLED_NUM 4
+#ifdef RGB_DI_PIN
-#define RGBLIGHT_ANIMATIONS
+    #define RGBLED_NUM 4
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+    #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
@@ -64,10 +93,89 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MATRIX_HAS_GHOST
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -83,8 +191,62 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
+
-//#define NO_ACTION_FUNCTION
+/* disable these deprecated features by default */
+#ifndef LINK_TIME_OPTIMIZATION_ENABLE
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+#endif
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
 
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0

keyboards/cospad/cospad.c

@@ -1,5 +1,4 @@
-    
+/* Copyright 2020
-/* Copyright 2019
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -16,18 +15,18 @@
  */
 #include "cospad.h"
 
-#ifdef BACKLIGHT_ENABLE
+void keyboard_pre_init_kb(void) {
-
+    led_init_ports();
-void backlight_init_ports(void) {
+    keyboard_pre_init_user();
-  setPinOutput(F7);
 }
 
-void backlight_set(uint8_t level) {
+void led_init_ports(void) {
-  writePin(F7, !!level);
+    setPinOutput(B2);
 }
 
-void backlight_task(void) {
+bool led_update_kb(led_t led_state) {
-    // do nothing - as default implementation of software PWM does not work
+    if (led_update_user(led_state)) {
+        writePin(B2, !led_state.num_lock);
+    }
+    return true;
 }
-
-#endif //BACKLIGHT_ENABLE

keyboards/cospad/cospad.h

@@ -1,5 +1,4 @@
-
+/* Copyright 2020
-/* Copyright 2019
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,12 +13,14 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #pragma once
 
 #include "quantum.h"
+
 #define ___ KC_NO
 
-/* This a shortcut to help you visually see your layout.
+/* This is a shortcut to help you visually see your layout.
  *
  * The first section contains all of the arguments representing the physical
  * layout of the board and position of the keys.
@@ -28,100 +29,100 @@
  * represents the switch matrix.
  */
 
-/* COSPAD ortho matrix layout
+/* 6x4 ortholinear layout
-   * ,-------------------.
+ * ,-------------------.
-   * | 00 | 01 | 02 | 03 |
+ * | 00 | 01 | 02 | 03 |
-   * |----|----|----|----|
+ * |----|----|----|----|
-   * | 10 | 11 | 12 | 13 |
+ * | 10 | 11 | 12 | 13 |
-   * |----|----|----|----|
+ * |----|----|----|----|
-   * | 20 | 21 | 22 | 23 |
+ * | 20 | 21 | 22 | 23 |
-   * |----|----|----|----|
+ * |----|----|----|----|
-   * | 30 | 31 | 32 | 33 |
+ * | 30 | 31 | 32 | 33 |
-   * |----|----|----|----|
+ * |----|----|----|----|
-   * | 40 | 41 | 42 | 43 |
+ * | 40 | 41 | 42 | 43 |
-   * |----|----|----|----|
+ * |----|----|----|----|
-   * | 50 | 51 | 52 | 53 |
+ * | 50 | 51 | 52 | 53 |
-   * `-------------------'
+ * `-------------------'
  */
 #define LAYOUT_ortho_6x4( \
-	k00, k01, k02, k03, \
+    k00, k01, k02, k03, \
-	k10, k11, k12, k13, \
+    k10, k11, k12, k13, \
-	k20, k21, k22, k23, \
+    k20, k21, k22, k23, \
-	k30, k31, k32, k33, \
+    k30, k31, k32, k33, \
-	k40, k41, k42, k43, \
+    k40, k41, k42, k43, \
-	k50, k51, k52, k53  \
+    k50, k51, k52, k53 \
 ) \
 { \
-	{k00, k01, k02, k03}, \
+    { k00, k01, k02, k03 }, \
-	{k10, k11, k12, k13}, \
+    { k10, k11, k12, k13 }, \
-	{k20, k21, k22, k23}, \
+    { k20, k21, k22, k23 }, \
-	{k30, k31, k32, k33}, \
+    { k30, k31, k32, k33 }, \
-	{k40, k41, k42, k43}, \
+    { k40, k41, k42, k43 }, \
-	{k50, k51, k52, k53}  \
+    { k50, k51, k52, k53 } \
 }
 
-/* COSPAD gamepad matrix layout
+/* 6x4 gamepad layout
-   * ,-------------------.
+ * ,-------------------.
-   * | 00 | 01 | 02 | 03 |
+ * | 00 | 01 | 02 | 03 |
-   * |----|----|----|----|
+ * |----|----|----|----|
-   * | 10 | 11 | 12 | 13 |
+ * | 10 | 11 | 12 | 13 |
-   * |----|----|----|----|
+ * |----|----|----|----|
-   * | 20 | 21 | 22 |    |
+ * | 20 | 21 | 22 |    |
-   * |----|----|----| 23 |
+ * |----|----|----| 23 |
-   * | 30 | 31 | 32 |    |
+ * | 30 | 31 | 32 |    |
-   * |----|----|----|----|
+ * |----|----|----|----|
-   * | 40 | 41 | 42 | 43 |
+ * | 40 | 41 | 42 | 43 |
-   * |----|----|----|----|
+ * |----|----|----|----|
-   * | 50 | 51 | 52 | 53 |
+ * | 50 | 51 | 52 | 53 |
-   * `-------------------'
+ * `-------------------'
  */
 #define LAYOUT_gamepad_6x4( \
-	k00, k01, k02, k03, \
+    k00, k01, k02, k03, \
-	k10, k11, k12, k13, \
+    k10, k11, k12, k13, \
-	k20, k21, k22,      \
+    k20, k21, k22, \
-	k30, k31, k32, k23, \
+    k30, k31, k32, k23, \
-	k40, k41, k42, k43, \
+    k40, k41, k42, k43, \
-	k50, k51, k52, k53  \
+    k50, k51, k52, k53  \
 ) \
 { \
-	{k00, k01, k02, k03},   \
+    { k00, k01, k02, k03 }, \
-	{k10, k11, k12, k13},   \
+    { k10, k11, k12, k13 }, \
-	{k20, k21, k22, k23},   \
+    { k20, k21, k22, k23 }, \
-	{k30, k31, k32, ___}, \
+    { k30, k31, k32, ___ }, \
-	{k40, k41, k42, k43},   \
+    { k40, k41, k42, k43 }, \
-	{k50, k51, k52, k53}    \
+    { k50, k51, k52, k53 } \
 }
 
-/* COSPAD numpad matrix layout
+/* 6x4 numpad layout
-   * ,-------------------.
+ * ,-------------------.
-   * | 00 | 01 | 02 | 03 |
+ * | 00 | 01 | 02 | 03 |
-   * |----|----|----|----|
+ * |----|----|----|----|
-   * | 10 | 11 | 12 | 13 |
+ * | 10 | 11 | 12 | 13 |
-   * |----|----|----|----|
+ * |----|----|----|----|
-   * | 20 | 21 | 22 |    |
+ * | 20 | 21 | 22 |    |
-   * |----|----|----| 23 |
+ * |----|----|----| 23 |
-   * | 30 | 31 | 32 |    |
+ * | 30 | 31 | 32 |    |
-   * |----|----|----|----|
+ * |----|----|----|----|
-   * | 40 | 41 | 42 |    |
+ * | 40 | 41 | 42 |    |
-   * |----|----|----| 43 |
+ * |----|----|----| 43 |
-   * |    50   | 52 |    |
+ * |    50   | 52 |    |
-   * `-------------------'
+ * `-------------------'
  */
 #define LAYOUT_numpad_6x4( \
-	k00, k01, k02, k03,  \
+    k00, k01, k02, k03, \
-	k10, k11, k12, k13,  \
+    k10, k11, k12, k13, \
-	k20, k21, k22,       \
+    k20, k21, k22, \
-	k30, k31, k32, k23,  \
+    k30, k31, k32, k23, \
-	k40, k41, k42,       \
+    k40, k41, k42, \
-	k50,      k52, k43   \
+    k50,      k52, k43 \
 ) \
 { \
-	{k00, k01, k02, k03},   \
+    { k00, k01, k02, k03 }, \
-	{k10, k11, k12, k13},   \
+    { k10, k11, k12, k13 }, \
-	{k20, k21, k22, k23},   \
+    { k20, k21, k22, k23 }, \
-	{k30, k31, k32, ___}, \
+    { k30, k31, k32, ___ }, \
-	{k40, k41, k42, k43},   \
+    { k40, k41, k42, k43 }, \
-	{k50, ___, k52, ___}  \
+    { k50, ___, k52, ___ } \
 }
 
 // Add backwards compatibility for existing keymaps

keyboards/cospad/info.json

@@ -1,95 +1,107 @@
 {
-  "keyboard_name": "Cospad",
+    "keyboard_name": "Cospad",
-  "keyboard_folder": "cospad",
+    "url": "",
-  "url": "",
+    "maintainer": "qmk",
-  "maintainer": "qmk",
+    "width": 4,
-  "width": 4,
+    "height": 6,
-  "height": 6,
+    "layouts": {
-  "layouts": {
+        "LAYOUT_numpad_6x4": {
-    "LAYOUT_numpad_6x4": {
+            "key_count": 21,
-      "key_count": 21,
+            "layout": [
-      "layout": [
+                {"x":0, "y":0},
-        {"label":"Esc", "x":0, "y":0},
+                {"x":1, "y":0},
-        {"label":"Tab", "x":1, "y":0},
+                {"x":2, "y":0},
-        {"label":"Fn", "x":2, "y":0},
+                {"x":3, "y":0},
-        {"label":"Back", "x":3, "y":0},
-        {"label":"Num Lock", "x":0, "y":1},
-        {"label":"/", "x":1, "y":1},
-        {"label":"*", "x":2, "y":1},
-        {"label":"-", "x":3, "y":1},
-        {"label":"7", "x":0, "y":2},
-        {"label":"8", "x":1, "y":2},
-        {"label":"9", "x":2, "y":2},
-        {"label":"4", "x":0, "y":3},
-        {"label":"5", "x":1, "y":3},
-        {"label":"6", "x":2, "y":3},
-        {"label":"+", "x":3, "y":2, "h":2},
-        {"label":"1", "x":0, "y":4},
-        {"label":"2", "x":1, "y":4},
-        {"label":"3", "x":2, "y":4},
-        {"label":"0", "x":0, "y":5, "w":2},
-        {"label":".", "x":2, "y":5},
-        {"label":"Enter", "x":3, "y":4, "h":2}
-      ]
-    },
 
-    "LAYOUT_gamepad_6x4": {
+                {"x":0, "y":1},
-      "key_count": 23,
+                {"x":1, "y":1},
-      "layout": [
+                {"x":2, "y":1},
-        {"label":"k00", "x":0, "y":0},
+                {"x":3, "y":1},
-        {"label":"k01", "x":1, "y":0},
-        {"label":"k02", "x":2, "y":0},
-        {"label":"k03", "x":3, "y":0},
-        {"label":"k10", "x":0, "y":1},
-        {"label":"k11", "x":1, "y":1},
-        {"label":"k12", "x":2, "y":1},
-        {"label":"k13", "x":3, "y":1},
-        {"label":"k20", "x":0, "y":2},
-        {"label":"k21", "x":1, "y":2},
-        {"label":"k22", "x":2, "y":2},
-        {"label":"k30", "x":0, "y":3},
-        {"label":"k31", "x":1, "y":3},
-        {"label":"k32", "x":2, "y":3},
-        {"label":"k23", "x":3, "y":2, "h":2},
-        {"label":"k40", "x":0, "y":4},
-        {"label":"k41", "x":1, "y":4},
-        {"label":"k42", "x":2, "y":4},
-        {"label":"k43", "x":3, "y":4},
-        {"label":"k50", "x":0, "y":5},
-        {"label":"k51", "x":1, "y":5},
-        {"label":"k52", "x":2, "y":5},
-        {"label":"k53", "x":3, "y":5}
-      ]
-    },
 
-    "LAYOUT_ortho_6x4": {
+                {"x":0, "y":2},
-      "key_count": 24,
+                {"x":1, "y":2},
-      "layout": [
+                {"x":2, "y":2},
-        {"label":"k00", "x":0, "y":0},
+
-        {"label":"k01", "x":1, "y":0},
+                {"x":0, "y":3},
-        {"label":"k02", "x":2, "y":0},
+                {"x":1, "y":3},
-        {"label":"k03", "x":3, "y":0},
+                {"x":2, "y":3},
-        {"label":"k10", "x":0, "y":1},
+                {"x":3, "y":2, "h":2},
-        {"label":"k11", "x":1, "y":1},
+
-        {"label":"k12", "x":2, "y":1},
+                {"x":0, "y":4},
-        {"label":"k13", "x":3, "y":1},
+                {"x":1, "y":4},
-        {"label":"k20", "x":0, "y":2},
+                {"x":2, "y":4},
-        {"label":"k21", "x":1, "y":2},
+
-        {"label":"k22", "x":2, "y":2},
+                {"x":0, "y":5, "w":2},
-        {"label":"k23", "x":3, "y":2},
+                {"x":2, "y":5},
-        {"label":"k30", "x":0, "y":3},
+                {"x":3, "y":4, "h":2}
-        {"label":"k31", "x":1, "y":3},
+            ]
-        {"label":"k32", "x":2, "y":3},
+        },
-        {"label":"k33", "x":3, "y":3},
+        "LAYOUT_gamepad_6x4": {
-        {"label":"k40", "x":0, "y":4},
+            "key_count": 23,
-        {"label":"k41", "x":1, "y":4},
+            "layout": [
-        {"label":"k42", "x":2, "y":4},
+                {"x":0, "y":0},
-        {"label":"k43", "x":3, "y":4},
+                {"x":1, "y":0},
-        {"label":"k50", "x":0, "y":5},
+                {"x":2, "y":0},
-        {"label":"k51", "x":1, "y":5},
+                {"x":3, "y":0},
-        {"label":"k52", "x":2, "y":5},
+
-        {"label":"k53", "x":3, "y":5}
+                {"x":0, "y":1},
-      ]
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":2, "h":2},
+
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+                {"x":3, "y":4},
+
+                {"x":0, "y":5},
+                {"x":1, "y":5},
+                {"x":2, "y":5},
+                {"x":3, "y":5}
+            ]
+        },
+        "LAYOUT_ortho_6x4": {
+            "key_count": 24,
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+                {"x":3, "y":4},
+
+                {"x":0, "y":5},
+                {"x":1, "y":5},
+                {"x":2, "y":5},
+                {"x":3, "y":5}
+            ]
+        }
     }
-  }
 }

keyboards/cospad/keymaps/default/keymap.c

@@ -1,60 +1,57 @@
 #include QMK_KEYBOARD_H
 
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// Defines names for use in layer keycodes and the keymap
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+enum layer_names {
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
+    _BL,
-// entirely and just use numbers.
+    _FL
-enum layers {
-  _BL = 0,
-  _FL
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-/* Keymap _BL: (Base Layer) Default Layer
+    /* Keymap _BL: (Base Layer) Default Layer
- * ,-------------------.
+     * ,-------------------.
- * |Esc |TAB | FN | BS |
+     * |Esc |TAB | FN | BS |
- * |----|----|----|----|
+     * |----|----|----|----|
- * | NL | /  | *  | -  |
+     * | NL | /  | *  | -  |
- * |----|----|----|----|
+     * |----|----|----|----|
- * | 7  | 8  | 9  |    |
+     * | 7  | 8  | 9  |    |
- * |----|----|----| +  |
+     * |----|----|----| +  |
- * | 4  | 5  | 6  |    |
+     * | 4  | 5  | 6  |    |
- * |----|----|----|----|
+     * |----|----|----|----|
- * | 1  | 2  | 3  |    |
+     * | 1  | 2  | 3  |    |
- * |----|----|----| En |
+     * |----|----|----| En |
- * |   0     | .  |    |
+     * |   0     | .  |    |
- * `-------------------'
+     * `-------------------'
- */
+     */
-  [_BL] = LAYOUT_numpad_6x4(
+    [_BL] = LAYOUT_numpad_6x4(
-    KC_ESC,   KC_TAB,   MO(_FL),   KC_BSPC, \
+        KC_ESC,  KC_TAB,  MO(_FL), KC_BSPC,
-    KC_NLCK,  KC_PSLS,  KC_PAST,   KC_PMNS, \
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
-    KC_P7,    KC_P8,    KC_P9,              \
+        KC_P7,   KC_P8,   KC_P9,
-    KC_P4,    KC_P5,    KC_P6,     KC_PPLS, \
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
-    KC_P1,    KC_P2,    KC_P3,              \
+        KC_P1,   KC_P2,   KC_P3,
-    KC_P0,              KC_PDOT,   KC_PENT
+        KC_P0,            KC_PDOT, KC_PENT
-  ),
+    ),
 
-/* Keymap _FL: Function Layer
+    /* Keymap _FL: Function Layer
- * ,-------------------.
+     * ,-------------------.
- * |RGBT|    |    |    |
+     * |RGBT|    |    |    |
- * |----|----|----|----|
+     * |----|----|----|----|
- * |RGBM|RGBP|BTOG|    |
+     * |RGBM|RGBP|BTOG|    |
- * |----|----|----|----|
+     * |----|----|----|----|
- * |HUD |HUI |BON |    |
+     * |HUD |HUI |BON |    |
- * |----|----|----|    |
+     * |----|----|----|    |
- * |SAD |SAI |BOFF|    |
+     * |SAD |SAI |BOFF|    |
- * |----|----|----|----|
+     * |----|----|----|----|
- * |VAD |VAS |BSTP|    |
+     * |VAD |VAS |BSTP|    |
- * |----|----|----|    |
+     * |----|----|----|    |
- * |         |RST |    |
+     * |         |RST |    |
- * `-------------------'
+     * `-------------------'
- */
+    */
-  [_FL] = LAYOUT_numpad_6x4(
+    [_FL] = LAYOUT_numpad_6x4(
-    RGB_TOG,  _______,  _______,   _______, \
+        RGB_TOG, _______, _______, _______,
-    RGB_MOD,  RGB_M_P,  BL_TOGG,   _______, \
+        RGB_MOD, RGB_M_P, BL_TOGG, _______,
-    RGB_HUD,  RGB_HUI,  BL_ON,              \
+        RGB_HUD, RGB_HUI, BL_ON,
-    RGB_SAD,  RGB_SAI,  BL_OFF,    _______, \
+        RGB_SAD, RGB_SAI, BL_OFF,  _______,
-    RGB_VAD,  RGB_VAI,  BL_STEP,            \
+        RGB_VAD, RGB_VAI, BL_STEP,
-    _______,            RESET,     _______
+        _______,          RESET,   _______
-  ),
+    )
 };

keyboards/cospad/readme.md

@@ -1,18 +1,15 @@
-COSPAD
+# Cospad
-===
 
-A DIY Keypad Kit sold by KPRepublic, runs TKG natively.
+A DIY keypad kit sold by KPRepublic, runs TKG natively.
 
-Keyboard Maintainer: QMK Community  
+* Keyboard Maintainer: QMK Community
-Hardware Supported: COSPAD  
+* Hardware Supported: Cospad PCB
-Hardware Availability: [KPrepublic on Aliexpress](https://aliexpress.com/item/cospad-Custom-Mechanical-Keyboard-Kit-up-tp-24-keys-Supports-TKG-TOOLS-Underglow-RGB-PCB-20/32818383873.html)
+* Hardware Availability: [KPrepublic on Aliexpress](https://aliexpress.com/item/cospad-Custom-Mechanical-Keyboard-Kit-up-tp-24-keys-Supports-TKG-TOOLS-Underglow-RGB-PCB-20/32818383873.html)
-
-Only supports on and off for the backlight leds, as they are not connected to a PWM pin.
 
 Supported Layouts:
 
-![Numpad Layout of COSPAD](https://i.imgur.com/t03lXJ4.png)
+![Numpad layouts](https://i.imgur.com/t03lXJ4.png)
-![Ortholinear Layout of COSPAD](https://i.imgur.com/mliUcCc.png)
+![Ortholinear layouts](https://i.imgur.com/mliUcCc.png)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/cospad/rules.mk

@@ -12,23 +12,23 @@ MCU = atmega32u4
 BOOTLOADER = atmel-dfu
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = no	    # Mouse keys(+4700)
+MOUSEKEY_ENABLE = no        # Mouse keys
-EXTRAKEY_ENABLE = yes	    # Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug(+400)
+CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-BACKLIGHT_CUSTOM_DRIVER = yes
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-RGBLIGHT_ENABLE = yes       # Enable keyboard underlight functionality (+4870)
+MIDI_ENABLE = no            # MIDI support
-MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
-
 
 LAYOUTS = numpad_6x4 ortho_6x4

keyboards/crkbd/keymaps/dsanchezseco/config.h

@@ -31,7 +31,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // lower maximum brightness to lower power usage and prevent unresponsiveness
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT
 
 //disable effects
 #define DISABLE_RGB_MATRIX_ALPHAS_MODS         // Static dual hue speed is hue for secondary hue

keyboards/crkbd/keymaps/dsanchezseco/rules.mk

@@ -3,7 +3,7 @@
 SRC += ./logo_reader.c
 
 # enable OLED displays
-OLED_DRIVER_ENABLE = yes
+OLED_DRIVER_ENABLE = no
 
 # enable media keys
 EXTRAKEY_ENABLE = yes

keyboards/dz60/config.h

@@ -4,7 +4,7 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x445A  // "DZ"
 #define PRODUCT_ID      0x2260
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    KBDFans
@@ -46,3 +46,6 @@
 #define RGBLIGHT_SLEEP
 #endif
 #endif
+
+/* VIA related config */
+#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2

keyboards/dz60/keymaps/via/keymap.c

@@ -0,0 +1,29 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT(
+		KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_NO,   KC_BSPC,
+		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_NO,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, KC_RGUI, KC_NO,   MO(1),   KC_RCTL),
+	LAYOUT(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_DEL,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+	LAYOUT(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+	LAYOUT(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+};

keyboards/dz60/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+LINK_TIME_OPTIMIZATION_ENABLE = yes
+VIA_ENABLE = yes

keyboards/gray_studio/think65/solder/readme.md

@@ -6,8 +6,6 @@ Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
 Hardware Supported: Think6.5 Compatible PCB  
 Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=100166.0)
 
-**Note:** The `LAYOUT_65_ansi_blocker` LAYOUT macro utilizes the same pins and switch matrix as the hotswap version. Any firmware made with this LAYOUT macro can be flashed on both the Solder (Compatible) version and the Hotswap version of the Think6.5.  
-
 **Indicator LEDs:** The solder PCB ONLY supports Caps Lock LEDs unlike the Hotswap version that supports Num Lock, Caps Lock, and Scroll Lock.  
 
 Make example for this keyboard (after setting up your build environment):

keyboards/gray_studio/think65/solder/solder.c

@@ -25,17 +25,9 @@ void matrix_init_kb(void) {
   // runs once when the firmware starts up
 
   setPinOutput(C7);
-  
   matrix_init_user();
 }
 
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
   // put your per-action keyboard code here
   // runs for every action, just before processing by the firmware
@@ -43,15 +35,9 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
   return process_record_user(keycode, record);
 }
 
-void led_set_kb(uint8_t usb_led) {
+bool led_update_kb(led_t led_state) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+  if(led_update_user(led_state)) {
-
+    writePin(C7, !led_state.caps_lock);
-  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinLow(C7);
-  } else {
-    writePinHigh(C7);
   }
-
+  return true;
-  led_set_user(usb_led);
 }
-

keyboards/gray_studio/think65/solder/solder.h

@@ -32,16 +32,16 @@
 }
 
 #define LAYOUT_65_ansi_blocker( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E,      K0F,   \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,      K0F,   \
     K10,   K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E,    K1F,   \
     K20,    K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,        K2F,   \
-    K31,       K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D,     K3E, K3F,   \
+    K30,       K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D,     K3E, K3F,   \
     K40,  K41,  K43,              K46,                K4A,  K4B,     K4D, K4E, K4F    \
 ) { \
-    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   KC_NO, K0E,   K0F   }, \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   KC_NO, K0F   }, \
     { K10,   KC_NO, K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E,   K1F   }, \
     { K20,   KC_NO, K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   KC_NO, K2F   }, \
-    { KC_NO, K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   KC_NO, K3D,   K3E,   K3F   }, \
+    { K30,   KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   KC_NO, K3D,   K3E,   K3F   }, \
     { K40,   K41,   KC_NO, K43,   KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, K4A,   K4B,   KC_NO, K4D,   K4E,   K4F   }, \
 }
 

keyboards/hs60/v2/ansi/ansi.h

@@ -0,0 +1,38 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define XXX KC_NO
+
+#include "quantum.h"
+#include "../../wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "via.h"
+
+// This a shortcut to help you visually see your layout.
+
+#define LAYOUT_60_ansi( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
+    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+    { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
+    { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }  \
+}

keyboards/hs60/v2/ansi/config.h

@@ -0,0 +1,146 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x8968
+#define PRODUCT_ID      0x4854
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Yiancar-Designs
+#define PRODUCT         HS60 V2
+#define DESCRIPTION     GH60 compatible, tool free RGB keyboard
+
+#define HS60_ANSI
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+#define MATRIX_ROW_PINS { B3, B4, B5, A8, A4 }
+#define MATRIX_COL_PINS { A13, A10, A9, A14, A15, B8, B9, C13, C14, C15, A0, A1, A2, A3 }
+// To enable debugger set A13 A14 -> A5 A6
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+
+/* Backlight options */
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+#define RGB_BACKLIGHT_HS60
+
+// they aren't really used if RGB_BACKLIGHT_HS60 defined
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 6
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 64
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0010000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0010000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0010000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011110000000111
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+// Backlight config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
+

keyboards/hs60/v2/ansi/info.json

@@ -0,0 +1,333 @@
+{
+  "keyboard_name": "HS60v2",
+  "maintainer": "yiancar",
+  "url": "",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_60_ansi": {
+      "key_count": 61,
+      "layout": [
+        {
+          "label": "~",
+          "x": 0,
+          "y": 0
+        },
+        {
+          "label": "!",
+          "x": 1,
+          "y": 0
+        },
+        {
+          "label": "@",
+          "x": 2,
+          "y": 0
+        },
+        {
+          "label": "#",
+          "x": 3,
+          "y": 0
+        },
+        {
+          "label": "$",
+          "x": 4,
+          "y": 0
+        },
+        {
+          "label": "%",
+          "x": 5,
+          "y": 0
+        },
+        {
+          "label": "^",
+          "x": 6,
+          "y": 0
+        },
+        {
+          "label": "&",
+          "x": 7,
+          "y": 0
+        },
+        {
+          "label": "*",
+          "x": 8,
+          "y": 0
+        },
+        {
+          "label": "(",
+          "x": 9,
+          "y": 0
+        },
+        {
+          "label": ")",
+          "x": 10,
+          "y": 0
+        },
+        {
+          "label": "_",
+          "x": 11,
+          "y": 0
+        },
+        {
+          "label": "+",
+          "x": 12,
+          "y": 0
+        },
+        {
+          "label": "Backspace",
+          "x": 13,
+          "y": 0,
+          "w": 2
+        },
+        {
+          "label": "Tab",
+          "x": 0,
+          "y": 1,
+          "w": 1.5
+        },
+        {
+          "label": "Q",
+          "x": 1.5,
+          "y": 1
+        },
+        {
+          "label": "W",
+          "x": 2.5,
+          "y": 1
+        },
+        {
+          "label": "E",
+          "x": 3.5,
+          "y": 1
+        },
+        {
+          "label": "R",
+          "x": 4.5,
+          "y": 1
+        },
+        {
+          "label": "T",
+          "x": 5.5,
+          "y": 1
+        },
+        {
+          "label": "Y",
+          "x": 6.5,
+          "y": 1
+        },
+        {
+          "label": "U",
+          "x": 7.5,
+          "y": 1
+        },
+        {
+          "label": "I",
+          "x": 8.5,
+          "y": 1
+        },
+        {
+          "label": "O",
+          "x": 9.5,
+          "y": 1
+        },
+        {
+          "label": "P",
+          "x": 10.5,
+          "y": 1
+        },
+        {
+          "label": "{",
+          "x": 11.5,
+          "y": 1
+        },
+        {
+          "label": "}",
+          "x": 12.5,
+          "y": 1
+        },
+        {
+          "label": "|",
+          "x": 13.5,
+          "y": 1,
+          "w": 1.5
+        },
+        {
+          "label": "Caps Lock",
+          "x": 0,
+          "y": 2,
+          "w": 1.75
+        },
+        {
+          "label": "A",
+          "x": 1.75,
+          "y": 2
+        },
+        {
+          "label": "S",
+          "x": 2.75,
+          "y": 2
+        },
+        {
+          "label": "D",
+          "x": 3.75,
+          "y": 2
+        },
+        {
+          "label": "F",
+          "x": 4.75,
+          "y": 2
+        },
+        {
+          "label": "G",
+          "x": 5.75,
+          "y": 2
+        },
+        {
+          "label": "H",
+          "x": 6.75,
+          "y": 2
+        },
+        {
+          "label": "J",
+          "x": 7.75,
+          "y": 2
+        },
+        {
+          "label": "K",
+          "x": 8.75,
+          "y": 2
+        },
+        {
+          "label": "L",
+          "x": 9.75,
+          "y": 2
+        },
+        {
+          "label": ":",
+          "x": 10.75,
+          "y": 2
+        },
+        {
+          "label": "\"",
+          "x": 11.75,
+          "y": 2
+        },
+        {
+          "label": "Enter",
+          "x": 12.75,
+          "y": 2,
+          "w": 2.25
+        },
+        {
+          "label": "Shift",
+          "x": 0,
+          "y": 3,
+          "w": 2.25
+        },
+        {
+          "label": "Z",
+          "x": 2.25,
+          "y": 3
+        },
+        {
+          "label": "X",
+          "x": 3.25,
+          "y": 3
+        },
+        {
+          "label": "C",
+          "x": 4.25,
+          "y": 3
+        },
+        {
+          "label": "V",
+          "x": 5.25,
+          "y": 3
+        },
+        {
+          "label": "B",
+          "x": 6.25,
+          "y": 3
+        },
+        {
+          "label": "N",
+          "x": 7.25,
+          "y": 3
+        },
+        {
+          "label": "M",
+          "x": 8.25,
+          "y": 3
+        },
+        {
+          "label": "<",
+          "x": 9.25,
+          "y": 3
+        },
+        {
+          "label": ">",
+          "x": 10.25,
+          "y": 3
+        },
+        {
+          "label": "?",
+          "x": 11.25,
+          "y": 3
+        },
+        {
+          "label": "Shift",
+          "x": 12.25,
+          "y": 3,
+          "w": 2.75
+        },
+        {
+          "label": "Ctrl",
+          "x": 0,
+          "y": 4,
+          "w": 1.25
+        },
+        {
+          "label": "Win",
+          "x": 1.25,
+          "y": 4,
+          "w": 1.25
+        },
+        {
+          "label": "Alt",
+          "x": 2.5,
+          "y": 4,
+          "w": 1.25
+        },
+        {
+          "x": 3.75,
+          "y": 4,
+          "w": 6.25
+        },
+        {
+          "label": "Alt",
+          "x": 10,
+          "y": 4,
+          "w": 1.25
+        },
+        {
+          "label": "Win",
+          "x": 11.25,
+          "y": 4,
+          "w": 1.25
+        },
+        {
+          "label": "Menu",
+          "x": 12.5,
+          "y": 4,
+          "w": 1.25
+        },
+        {
+          "label": "Ctrl",
+          "x": 13.75,
+          "y": 4,
+          "w": 1.25
+        }
+      ]
+    }
+  }
+}

keyboards/hs60/v2/ansi/keymaps/stanrc85/config.h

@@ -1,10 +1,5 @@
 #pragma once
 
-// Include overwrites for specific keymap
-#define HS60_ANSI
-#undef  PRODUCT_ID
-#define PRODUCT_ID      0x4854
-
 // disable backlight after timeout in minutes, 0 = no timeout
 #undef RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT
 #define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 20

keyboards/hs60/v2/ansi/rules.mk

@@ -10,7 +10,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
 #   comment out to disable the options.
 #
 BACKLIGHT_ENABLE = no              # Enable keyboard backlight functionality
-BOOTMAGIC_ENABLE = no              # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite            # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys
 EXTRAKEY_ENABLE = yes              # Audio control and System control
 CONSOLE_ENABLE = no                # Console for debug
@@ -23,7 +23,7 @@ NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plu
 
 CIE1931_CURVE = yes
 
-LAYOUTS = 60_ansi 60_iso
+LAYOUTS = 60_ansi
 
 # project specific files
 SRC =	keyboards/wilba_tech/wt_main.c \

keyboards/hs60/v2/hhkb/config.h

@@ -0,0 +1,146 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x8968
+#define PRODUCT_ID      0x4855
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    Yiancar-Designs
+#define PRODUCT         HS60 V2
+#define DESCRIPTION     GH60 compatible, tool free RGB keyboard
+
+#define HS60_HHKB
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+#define MATRIX_ROW_PINS { B3, B4, B5, A8, A4 }
+#define MATRIX_COL_PINS { A13, A10, A9, A14, A15, B8, B9, C13, C14, C15, A0, A1, A2, A3 }
+// To enable debugger set A13 A14 -> A5 A6
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+
+/* Backlight options */
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+#define RGB_BACKLIGHT_HS60
+
+// they aren't really used if RGB_BACKLIGHT_HS60 defined
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 6
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 64
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+// Backlight config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
+

keyboards/hs60/v2/hhkb/hhkb.h

@@ -23,34 +23,6 @@
 
 // This a shortcut to help you visually see your layout.
 
-#define LAYOUT_60_iso( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
-    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D  \
-) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
-    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
-    { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }  \
-}
-
-#define LAYOUT_60_ansi( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
-    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
-    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D  \
-) { \
-    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
-    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \
-    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
-    { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
-    { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }  \
-}
-
 #define LAYOUT_60_hhkb( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K1D, \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C,      \

keyboards/hs60/v2/hhkb/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "HS60v2",
+  "maintainer": "yiancar",
+  "url": "",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_60_hhkb": {
+        "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}]
+    }
+  }
+}

keyboards/hs60/v2/hhkb/keymaps/goatmaster/config.h

@@ -18,20 +18,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* Include overwrites for specific keymap */
 
-#define HS60_HHKB
-#undef  PRODUCT_ID
-#define PRODUCT_ID      0x4855
-
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_0
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_1
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_2
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_3
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_4
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111
-
 #undef RGB_BACKLIGHT_CAPS_LOCK_INDICATOR
 #define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 255 }, .index = 3-1 } //red

keyboards/hs60/v2/hhkb/rules.mk

@@ -0,0 +1,31 @@
+# MCU name
+MCU = STM32F303
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no              # Enable keyboard backlight functionality
+BOOTMAGIC_ENABLE = lite            # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes              # Mouse keys
+EXTRAKEY_ENABLE = yes              # Audio control and System control
+CONSOLE_ENABLE = no                # Console for debug
+COMMAND_ENABLE = no                # Commands for debug and configuration
+SLEEP_LED_ENABLE = no              # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes                  # USB Nkey Rollover
+AUDIO_ENABLE = no                  # Audio output on port C6
+NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
+#SERIAL_LINK_ENABLE = yes
+
+CIE1931_CURVE = yes
+
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
+		drivers/issi/is31fl3733.c \
+		quantum/color.c \
+		drivers/arm/i2c_master.c

keyboards/hs60/v2/iso/config.h

@@ -82,6 +82,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
+/* Bootmagic Lite key configuration */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+
 /* Backlight options */
 
 #define RGB_BACKLIGHT_ENABLED 1

keyboards/hs60/v2/iso/info.json

@@ -0,0 +1,338 @@
+{
+  "keyboard_name": "HS60v2",
+  "maintainer": "yiancar",
+  "url": "",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_60_iso": {
+      "key_count": 62,
+      "layout": [
+        {
+          "label": "\\u00ac",
+          "x": 0,
+          "y": 0
+        },
+        {
+          "label": "!",
+          "x": 1,
+          "y": 0
+        },
+        {
+          "label": "\"",
+          "x": 2,
+          "y": 0
+        },
+        {
+          "label": "\\u00a3",
+          "x": 3,
+          "y": 0
+        },
+        {
+          "label": "$",
+          "x": 4,
+          "y": 0
+        },
+        {
+          "label": "%",
+          "x": 5,
+          "y": 0
+        },
+        {
+          "label": "^",
+          "x": 6,
+          "y": 0
+        },
+        {
+          "label": "&",
+          "x": 7,
+          "y": 0
+        },
+        {
+          "label": "*",
+          "x": 8,
+          "y": 0
+        },
+        {
+          "label": "(",
+          "x": 9,
+          "y": 0
+        },
+        {
+          "label": ")",
+          "x": 10,
+          "y": 0
+        },
+        {
+          "label": "_",
+          "x": 11,
+          "y": 0
+        },
+        {
+          "label": "+",
+          "x": 12,
+          "y": 0
+        },
+        {
+          "label": "Backspace",
+          "x": 13,
+          "y": 0,
+          "w": 2
+        },
+        {
+          "label": "Tab",
+          "x": 0,
+          "y": 1,
+          "w": 1.5
+        },
+        {
+          "label": "Q",
+          "x": 1.5,
+          "y": 1
+        },
+        {
+          "label": "W",
+          "x": 2.5,
+          "y": 1
+        },
+        {
+          "label": "E",
+          "x": 3.5,
+          "y": 1
+        },
+        {
+          "label": "R",
+          "x": 4.5,
+          "y": 1
+        },
+        {
+          "label": "T",
+          "x": 5.5,
+          "y": 1
+        },
+        {
+          "label": "Y",
+          "x": 6.5,
+          "y": 1
+        },
+        {
+          "label": "U",
+          "x": 7.5,
+          "y": 1
+        },
+        {
+          "label": "I",
+          "x": 8.5,
+          "y": 1
+        },
+        {
+          "label": "O",
+          "x": 9.5,
+          "y": 1
+        },
+        {
+          "label": "P",
+          "x": 10.5,
+          "y": 1
+        },
+        {
+          "label": "{",
+          "x": 11.5,
+          "y": 1
+        },
+        {
+          "label": "}",
+          "x": 12.5,
+          "y": 1
+        },
+        {
+          "label": "Enter",
+          "x": 13.75,
+          "y": 1,
+          "w": 1.25,
+          "h": 2
+        },
+        {
+          "label": "Caps Lock",
+          "x": 0,
+          "y": 2,
+          "w": 1.75
+        },
+        {
+          "label": "A",
+          "x": 1.75,
+          "y": 2
+        },
+        {
+          "label": "S",
+          "x": 2.75,
+          "y": 2
+        },
+        {
+          "label": "D",
+          "x": 3.75,
+          "y": 2
+        },
+        {
+          "label": "F",
+          "x": 4.75,
+          "y": 2
+        },
+        {
+          "label": "G",
+          "x": 5.75,
+          "y": 2
+        },
+        {
+          "label": "H",
+          "x": 6.75,
+          "y": 2
+        },
+        {
+          "label": "J",
+          "x": 7.75,
+          "y": 2
+        },
+        {
+          "label": "K",
+          "x": 8.75,
+          "y": 2
+        },
+        {
+          "label": "L",
+          "x": 9.75,
+          "y": 2
+        },
+        {
+          "label": ":",
+          "x": 10.75,
+          "y": 2
+        },
+        {
+          "label": "@",
+          "x": 11.75,
+          "y": 2
+        },
+        {
+          "label": "~",
+          "x": 12.75,
+          "y": 2
+        },
+        {
+          "label": "Shift",
+          "x": 0,
+          "y": 3,
+          "w": 1.25
+        },
+        {
+          "label": "|",
+          "x": 1.25,
+          "y": 3
+        },
+        {
+          "label": "Z",
+          "x": 2.25,
+          "y": 3
+        },
+        {
+          "label": "X",
+          "x": 3.25,
+          "y": 3
+        },
+        {
+          "label": "C",
+          "x": 4.25,
+          "y": 3
+        },
+        {
+          "label": "V",
+          "x": 5.25,
+          "y": 3
+        },
+        {
+          "label": "B",
+          "x": 6.25,
+          "y": 3
+        },
+        {
+          "label": "N",
+          "x": 7.25,
+          "y": 3
+        },
+        {
+          "label": "M",
+          "x": 8.25,
+          "y": 3
+        },
+        {
+          "label": "<",
+          "x": 9.25,
+          "y": 3
+        },
+        {
+          "label": ">",
+          "x": 10.25,
+          "y": 3
+        },
+        {
+          "label": "?",
+          "x": 11.25,
+          "y": 3
+        },
+        {
+          "label": "Shift",
+          "x": 12.25,
+          "y": 3,
+          "w": 2.75
+        },
+        {
+          "label": "Ctrl",
+          "x": 0,
+          "y": 4,
+          "w": 1.25
+        },
+        {
+          "label": "Win",
+          "x": 1.25,
+          "y": 4,
+          "w": 1.25
+        },
+        {
+          "label": "Alt",
+          "x": 2.5,
+          "y": 4,
+          "w": 1.25
+        },
+        {
+          "x": 3.75,
+          "y": 4,
+          "w": 6.25
+        },
+        {
+          "label": "AltGr",
+          "x": 10,
+          "y": 4,
+          "w": 1.25
+        },
+        {
+          "label": "Win",
+          "x": 11.25,
+          "y": 4,
+          "w": 1.25
+        },
+        {
+          "label": "Menu",
+          "x": 12.5,
+          "y": 4,
+          "w": 1.25
+        },
+        {
+          "label": "Ctrl",
+          "x": 13.75,
+          "y": 4,
+          "w": 1.25
+        }
+      ]
+    }
+  }
+}

keyboards/hs60/v2/iso/iso.h

@@ -0,0 +1,38 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define XXX KC_NO
+
+#include "quantum.h"
+#include "../../wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "via.h"
+
+// This a shortcut to help you visually see your layout.
+
+#define LAYOUT_60_iso( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
+    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
+    { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }  \
+}

keyboards/hs60/v2/iso/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = STM32F303
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no              # Enable keyboard backlight functionality
+BOOTMAGIC_ENABLE = lite            # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes              # Mouse keys
+EXTRAKEY_ENABLE = yes              # Audio control and System control
+CONSOLE_ENABLE = no                # Console for debug
+COMMAND_ENABLE = no                # Commands for debug and configuration
+SLEEP_LED_ENABLE = no              # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes                  # USB Nkey Rollover
+AUDIO_ENABLE = no                  # Audio output on port C6
+NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
+#SERIAL_LINK_ENABLE = yes
+
+CIE1931_CURVE = yes
+
+LAYOUTS = 60_iso
+
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
+		drivers/issi/is31fl3733.c \
+		quantum/color.c \
+		drivers/arm/i2c_master.c

keyboards/hs60/v2/keymaps/hhkb/config.h

@@ -1,34 +0,0 @@
-/*
-Copyright 2018 Yiancar
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-/* Include overwrites for specific keymap */
-
-#define HS60_HHKB
-#undef  PRODUCT_ID
-#define PRODUCT_ID      0x4855
-
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_0
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_1
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_2
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_3
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_4
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111

keyboards/hs60/v2/keymaps/hhkb_via/config.h

@@ -1,34 +0,0 @@
-/*
-Copyright 2018 Yiancar
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-#pragma once
-
-/* Include overwrites for specific keymap */
-
-#define HS60_HHKB
-#undef  PRODUCT_ID
-#define PRODUCT_ID      0x4855
-
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_0
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_1
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_2
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_3
-#undef  RGB_BACKLIGHT_ALPHAS_MODS_ROW_4
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0000000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
-#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111

keyboards/hs60/v2/readme.md

@@ -17,7 +17,7 @@ Due to the RGB implementation, the HS60 is currently not compatible with communi
 
 Make example for this keyboard (after setting up your build environment):
 
-    make hs60/v2:default
+    make hs60/v2/<layout>:default
 
 See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
 
@@ -34,4 +34,4 @@ See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools)
 - Unplug
 - Hold Escape
 - Plug In
-- Flash using QMK Toolbox or dfu-util (`make hs60/v2:<keymap>:dfu-util`)
+- Flash using QMK Toolbox or dfu-util (`make hs60/v2/<layout>:<keymap>:dfu-util`)

keyboards/hs60/v2/v2.c

@@ -13,6 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #ifndef RGB_BACKLIGHT_HS60
-#error RGB_BACKLIGHT_M60_A not defined, recheck config.h
+#error RGB_BACKLIGHT_HS60 not defined, recheck config.h
 #endif

keyboards/montsinger/rebound/keymaps/rossman360/keymap.c

@@ -0,0 +1,55 @@
+#include QMK_KEYBOARD_H
+#include "rossman360.h"
+
+#define PGMOD LT(_NUM, KC_PGDN)
+#define TABMOD LT(_FN1, KC_TAB)
+#define SPCMOD LT(_FN1, KC_SPACE)
+#define ENTMOD LT(_FN2, KC_ENTER)
+#define ESCMOD LT(_NUM, KC_ESC)
+#define RSMOD LT(_FN1, KC_RSHIFT)
+
+enum layer_names {
+  _BASE,
+  _DEL,
+  _FN1,
+  _FN2,
+  _NUM,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_BASE] = LAYOUT_ortho_4x12(
+    KC_ESC  , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   ,   KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , NTAB  ,
+    JUMPBACK, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   ,   KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT,
+    KC_LSFT , KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   ,   KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_MINS,
+    CMDBSP  , ALTDEL , KC_NO  , CTRLSP , TABMOD , PGMOD  ,   ENTMOD , SPCMOD , MO(_DEL),KC_NO  , KC_BSPC, KC_DEL
+  ),
+
+[_FN1] = LAYOUT_ortho_4x12(
+    _______, TAB1   , TAB2   , TAB3   , TAB4   , _______,     _______, UNDO   , _______, _______, _______, CTAB   ,
+    KC_CAPS, _______, _______, _______, _______, _______,     KC_HOME, KC_LEFT, KC_UP  , KC_RIGHT,KC_END , KC_NO  ,
+    _______, _______, XPANDR , _______, _______, _______,     _______, PMERGE , KC_DOWN, _______, _______, _______,
+    WREFRESH,_______, _______, _______, LWORD  , RWORD  ,     RVOLD  , RVOLU  , _______, _______, _______, _______
+  ),
+
+[_FN2] = LAYOUT_ortho_4x12(
+    _______, SPEAK1 , SPEAK2 , SPEAK3 , SPEAK4 , _______,    _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______,    _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______,    _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, PARADOWN, CSPEAK,    _______, _______, _______, _______, _______, _______
+  ),
+
+[_DEL] = LAYOUT_ortho_4x12(
+    _______, _______, _______, _______, _______, _______,     _______, UNDO   , _______, _______, _______, CTAB   ,
+    REMCAPS, _______, _______, _______, _______, _______,     _______, KC_LEFT, KC_UP  ,KC_RIGHT, _______, _______,
+    _______, _______, _______, _______, _______, _______,     _______, _______, KC_DOWN, _______, _______, _______,
+    _______, _______, _______, KC_DEL , KC_BSPC, BWORD  ,     _______, _______, _______, _______, _______, _______
+  ),
+
+[_NUM] = LAYOUT_ortho_4x12(
+    _______, KC_1   , KC_2   , KC_3   , KC_4   , KC_5   ,     KC_6   , KC_7   , KC_8   , KC_9   , KC_MINS, KC_EQL, 
+    KC_CAPS, _______, _______, _______, _______, _______,     KC_MINS, KC_4   , KC_5   , KC_6   , KC_COLN, _______,
+    _______, _______, _______, _______, _______, KC_LBRC,     KC_RBRC, KC_1   , KC_2   , KC_3   , KC_BSLS, _______, 
+    _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU,     _______, _______, KC_0   , _______, _______, _______
+  )
+};

keyboards/wilba_tech/rama_works_koyu/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "RAMA WORKS KOYU", 
     "url": "http://rama.works", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 16, 
     "height": 5, 
     "layouts": {

keyboards/wilba_tech/rama_works_m60_a/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "RAMA WORKS M60-A", 
     "url": "http://rama.works", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 15, 
     "height": 5, 
     "layouts": {

keyboards/wilba_tech/rama_works_u80_a/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "RAMA WORKS U80-A", 
     "url": "http://rama.works", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 18.25, 
     "height": 6.5, 
     "layouts": {

keyboards/wilba_tech/wt60_a/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "wilba.tech WT60-A", 
     "url": "https://wilba.tech", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 15, 
     "height": 5, 
     "layouts": {

keyboards/wilba_tech/wt60_b/config.h

@@ -0,0 +1,118 @@
+/* Copyright 2020 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6582 // wilba.tech
+#define PRODUCT_ID      0x60B0 // 60-B
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    wilba.tech
+#define PRODUCT         wilba.tech WT60-B
+#define DESCRIPTION     wilba.tech WT60-B
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
+// IS31FL3731 driver
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 72
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for wT60-B specifics
+#define RGB_BACKLIGHT_WT60_B
+
+// enable/disable LEDs based on layout
+// they aren't really used if RGB_BACKLIGHT_WT60_B defined
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+// Backlight config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
+
+// VIA lighting is handled by the keyboard-level code
+#define VIA_CUSTOM_LIGHTING_ENABLE

keyboards/wilba_tech/wt60_b/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "wilba.tech WT60-B",
+    "url": "https://wilba.tech",
+    "maintainer": "Wilba",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}]
+        }
+    }
+}

keyboards/wilba_tech/wt60_b/keymaps/default/keymap.c

@@ -0,0 +1,38 @@
+// Default layout for WT60-B
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_all(
+	KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+	KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, FN_MO13,
+	KC_NO,   KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, FN_MO23, KC_NO),
+
+// Fn1 Layer
+[1] = LAYOUT_all(
+	KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+	KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_all(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = LAYOUT_all(
+	KC_TRNS, EF_DEC,  EF_INC,  H1_DEC,  H1_INC,  H2_DEC,  H2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC,  BR_INC,  KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC,  S1_INC,  S2_DEC,  S2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC,  ES_INC,  KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/wilba_tech/wt60_b/keymaps/via/keymap.c

@@ -0,0 +1,38 @@
+// Default layout for WT60-B
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_all(
+	KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+	KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, FN_MO13,
+	KC_NO,   KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, FN_MO23, KC_NO),
+
+// Fn1 Layer
+[1] = LAYOUT_all(
+	KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+	KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_all(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = LAYOUT_all(
+	KC_TRNS, EF_DEC,  EF_INC,  H1_DEC,  H1_INC,  H2_DEC,  H2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC,  BR_INC,  KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC,  S1_INC,  S2_DEC,  S2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC,  ES_INC,  KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/wilba_tech/wt60_b/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/wilba_tech/wt60_b/readme.md

@@ -0,0 +1,18 @@
+# wilba.tech WT60-B
+
+WT60-B is a keyboard PCB supporting 60% layout. [More info at wilba.tech](https://wilba.tech/)
+
+First produced as WT60-B THERMAL for wilba.tech Thermal.
+
+WT60-B is the hotswap variant PCB.
+WT60-BX is the solderable variant PCB with split backspace and stepped Caps Lock support.
+
+* Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
+* Hardware Supported: wilba.tech WT60-B
+* Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wilba_tech/wt60_b:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/wilba_tech/wt60_b/rules.mk

@@ -0,0 +1,46 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+CIE1931_CURVE = yes
+
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
+		quantum/color.c \
+		drivers/issi/is31fl3731.c \
+		drivers/avr/i2c_master.c

keyboards/wilba_tech/wt60_b/wt60_b.c

@@ -0,0 +1 @@
+#include "wt60_b.h"

keyboards/wilba_tech/wt60_b/wt60_b.h

@@ -0,0 +1,37 @@
+/* Copyright 2020 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+#include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "via.h"
+
+#define ____ KC_NO
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       \
+    K400, K401, K402,                         K407,                   K411, K412, K413        \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+    { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+    { K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, ____, K411, K412, K413 }  \
+}

keyboards/wilba_tech/wt60_bx/config.h

@@ -0,0 +1,118 @@
+/* Copyright 2020 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6582 // wilba.tech
+#define PRODUCT_ID      0x60B1 // 60-BX
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    wilba.tech
+#define PRODUCT         wilba.tech WT60-BX
+#define DESCRIPTION     wilba.tech WT60-BX
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F0, F1, F4, F6, F7 }
+#define MATRIX_COL_PINS { F5, D5, B1, B2, B3, D3, D2, C7, C6, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
+// IS31FL3731 driver
+#define DRIVER_COUNT 2
+#define DRIVER_LED_TOTAL 72
+
+#define RGB_BACKLIGHT_ENABLED 1
+
+// This conditionally compiles the backlight code for wT60-BX specifics
+#define RGB_BACKLIGHT_WT60_BX
+
+// enable/disable LEDs based on layout
+// they aren't really used if RGB_BACKLIGHT_WT60_BX defined
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0b0000000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0b0010000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0b0011000000000001
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0b0011100000000111
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+// Backlight config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
+
+// VIA lighting is handled by the keyboard-level code
+#define VIA_CUSTOM_LIGHTING_ENABLE

keyboards/wilba_tech/wt60_bx/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "wilba.tech WT60-BX",
+    "url": "https://wilba.tech",
+    "maintainer": "Wilba",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}]
+        }
+    }
+}

keyboards/wilba_tech/wt60_bx/keymaps/default/keymap.c

@@ -0,0 +1,38 @@
+// Default layout for WT60-BX
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_all(
+	KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+	KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, FN_MO13,
+	KC_NO,   KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, FN_MO23, KC_NO),
+
+// Fn1 Layer
+[1] = LAYOUT_all(
+	KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+	KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_all(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = LAYOUT_all(
+	KC_TRNS, EF_DEC,  EF_INC,  H1_DEC,  H1_INC,  H2_DEC,  H2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC,  BR_INC,  KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC,  S1_INC,  S2_DEC,  S2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC,  ES_INC,  KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/wilba_tech/wt60_bx/keymaps/via/keymap.c

@@ -0,0 +1,38 @@
+// Default layout for WT60-BX
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Default layer
+[0] = LAYOUT_all(
+	KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,
+	KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+	KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+	KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, FN_MO13,
+	KC_NO,   KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, FN_MO23, KC_NO),
+
+// Fn1 Layer
+[1] = LAYOUT_all(
+	KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+	KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn2 Layer
+[2] = LAYOUT_all(
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+// Fn3 Layer (zeal60 Configuration)
+[3] = LAYOUT_all(
+	KC_TRNS, EF_DEC,  EF_INC,  H1_DEC,  H1_INC,  H2_DEC,  H2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BR_DEC,  BR_INC,  KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, S1_DEC,  S1_INC,  S2_DEC,  S2_INC,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, ES_DEC,  ES_INC,  KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+	KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS),
+
+};

keyboards/wilba_tech/wt60_bx/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/wilba_tech/wt60_bx/readme.md

@@ -0,0 +1,18 @@
+# wilba.tech WT60-BX
+
+WT60-BX is a keyboard PCB supporting 60% layout. [More info at wilba.tech](https://wilba.tech/)
+
+First produced as WT60-BX THERMAL for wilba.tech Thermal.
+
+WT60-B is the hotswap variant PCB.
+WT60-BX is the solderable variant PCB with split backspace and stepped Caps Lock support.
+
+* Keyboard Maintainer: [Wilba6582](https://github.com/Wilba6582)
+* Hardware Supported: wilba.tech WT60-BX
+* Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make wilba_tech/wt60_bx:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/wilba_tech/wt60_bx/rules.mk

@@ -0,0 +1,46 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+CIE1931_CURVE = yes
+
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
+		quantum/color.c \
+		drivers/issi/is31fl3731.c \
+		drivers/avr/i2c_master.c

keyboards/wilba_tech/wt60_bx/wt60_bx.c

@@ -0,0 +1 @@
+#include "wt60_bx.h"

keyboards/wilba_tech/wt60_bx/wt60_bx.h

@@ -0,0 +1,37 @@
+/* Copyright 2020 Jason Williams (Wilba)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+#include "keyboards/wilba_tech/wt_rgb_backlight_keycodes.h"
+#include "via.h"
+
+#define ____ KC_NO
+
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       \
+    K400, K401, K402,                         K407,                   K411, K412, K413        \
+) { \
+    { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+    { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
+    { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+    { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+    { K400, K401, K402, ____, ____, ____, ____, K407, ____, ____, ____, K411, K412, K413 }  \
+}

keyboards/wilba_tech/wt60_d/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "wilba.tech WT60-D", 
     "url": "https://wilba.tech", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 15, 
     "height": 5, 
     "layouts": {

keyboards/wilba_tech/wt65_a/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "wilba.tech WT65-A", 
     "url": "https://wilba.tech", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 16, 
     "height": 5, 
     "layouts": {

keyboards/wilba_tech/wt65_b/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "wilba.tech WT65-B", 
     "url": "https://wilba.tech", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 16, 
     "height": 5, 
     "layouts": {

keyboards/wilba_tech/wt69_a/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "wilba.tech WT69-A", 
     "url": "https://wilba.tech", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 18.25, 
     "height": 5, 
     "layouts": {

keyboards/wilba_tech/wt75_a/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "wilba.tech WT75-A", 
     "url": "https://wilba.tech", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 16, 
     "height": 6, 
     "layouts": {

keyboards/wilba_tech/wt75_b/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "wilba.tech WT75-B", 
     "url": "https://wilba.tech", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 16, 
     "height": 6, 
     "layouts": {

keyboards/wilba_tech/wt80_a/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "wilba.tech WT80-A", 
     "url": "https://wilba.tech", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 18.25, 
     "height": 6.5, 
     "layouts": {

keyboards/wilba_tech/wt8_a/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "wilba.tech WT8-A", 
     "url": "https://wilba.tech", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 4, 
     "height": 2, 
     "layouts": {

keyboards/wilba_tech/wt_rgb_backlight.c

@@ -14,9 +14,20 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#if defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_ZEAL65) || defined(RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65) || defined(RGB_BACKLIGHT_U80_A) || defined(RGB_BACKLIGHT_DAWN60)
+#if defined(RGB_BACKLIGHT_ZEAL60) || \
+    defined(RGB_BACKLIGHT_ZEAL65) || \
+    defined(RGB_BACKLIGHT_M60_A) || \
+    defined(RGB_BACKLIGHT_M6_B) || \
+    defined(RGB_BACKLIGHT_KOYU) || \
+    defined(RGB_BACKLIGHT_HS60) || \
+    defined(RGB_BACKLIGHT_NK65) || \
+    defined(RGB_BACKLIGHT_U80_A) || \
+    defined(RGB_BACKLIGHT_DAWN60) || \
+    defined(RGB_BACKLIGHT_WT60_B) || \
+    defined(RGB_BACKLIGHT_WT60_BX) || \
+    defined(RGB_BACKLIGHT_WT60_C)
 #else
-#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B, RGB_BACKLIGHT_KOYU, RGB_BACKLIGHT_HS60, RGB_BACKLIGHT_NK65, RGB_BACKLIGHT_U80_A, RGB_BACKLIGHT_DAWN60
+#error wt_rgb_backlight.c compiled without setting configuration symbol
 #endif
 
 #ifndef MAX
@@ -743,6 +754,35 @@ const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
     {0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255},
     {195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255}
 };
+#elif defined(RGB_BACKLIGHT_WT60_B) || defined(RGB_BACKLIGHT_WT60_BX) || defined(RGB_BACKLIGHT_WT60_C)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+    // LA0..LA17
+    {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
+    {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
+    // LB0..LB17
+    {144,0}, {160,0}, {176,0}, {192,0}, {208,0}, {224,0}, {216,0}, {255,255}, {255,255},
+    {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {255,255}, {255,255}, {255,255},
+    // LC0..LC17
+    {112,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {64,60}, {44,64}, {24,64},
+    {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {255,255}, {10,48}, {4,64},
+    // LD0..LD17
+    {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48},
+    {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {160,60}, {180,64}, {200,64}, {220,64}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+    // LA0..LA17
+    {58,129}, {70,129}, {80,139}, {89,157}, {96,181}, {101,208}, {105,238}, {109,255}, {128,247},
+    {58,255}, {64,255}, {70,255}, {75,255}, {80,255}, {85,255}, {89,255}, {93,255}, {96,255},
+    // LB0..LB17
+    {53,255}, {48,255}, {43,255}, {39,255}, {35,255}, {32,255}, {34,255}, {255,255}, {255,255},
+    {48,139}, {39,157}, {32,181}, {27,208}, {23,238}, {19,255}, {255,255}, {255,255}, {255,255},
+    // LC0..LC17
+    {192,255}, {183,131}, {173,143}, {165,163}, {159,188}, {154,216}, {173,248}, {170,255}, {165,255},
+    {128,9}, {128,46}, {128,82}, {128,119}, {128,155}, {128,192}, {255,255}, {148,255}, {161,255},
+    // LD0..LD17
+    {0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {0,233}, {228,201}, {235,242}, {237,255},
+    {195,128}, {206,136}, {215,152}, {222,175}, {255,255}, {211,248}, {214,255}, {219,255}, {223,255}
+};
 #elif defined(RGB_BACKLIGHT_U80_A)
 const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
     // Thse are scaled by 14.5 per U
@@ -1080,6 +1120,14 @@ const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
     { 36+16, 36+15,  36+5,  36+4,  36+3,  36+2,  36+1,  54+9, 54+10, 54+11, 54+12,  54+6,  54+7,  54+8 },
     { 36+17,  36+8,  36+7,  36+6,   255,   255,   255,  36+0,  255,  54+13, 54+14, 54+15, 54+16, 54+17 }
 };
+#elif defined(RGB_BACKLIGHT_WT60_B) || defined(RGB_BACKLIGHT_WT60_BX) || defined(RGB_BACKLIGHT_WT60_C)
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+    {  0+17,  0+16,  0+15,  0+14,  0+13,  0+12,  0+11,  0+10,   0+9,  18+0,  18+1,  18+2,  18+3,  18+4 },
+    {   0+7,   0+6,   0+5,   0+4,   0+3,   0+2,   0+1,   0+0,  18+9, 18+10, 18+11, 18+12, 18+13, 18+14 },
+    {   0+8, 36+14, 36+13, 36+12, 36+11, 36+10,  36+9,  54+0,  54+1,  54+2,  54+3,  54+4,  54+5,  18+5 },
+    { 36+16,   255,  36+5,  36+4,  36+3,  36+2,  36+1,  54+9, 54+10, 54+11, 54+12,  54+6,  54+7,  54+8 },
+    { 36+17,  36+8,  36+7,  36+6,   255,   255,   255,  36+0,  255,    255, 54+14, 54+15, 54+16, 54+17 }
+};
 #elif defined(RGB_BACKLIGHT_U80_A)
 // Note: Left spacebar stab is at 5,3 (LC6)
 // Right spacebar stab is at 5,10 (LD14)
@@ -2325,6 +2373,20 @@ void backlight_init_drivers(void)
                           ( index == 54+17 ) || // LD17
                           ( index == 36+15 ) || // LC15
                           ( index == 54+13 ) ); // LD13
+#elif defined(RGB_BACKLIGHT_WT60_B) || defined(RGB_BACKLIGHT_WT60_BX) || defined(RGB_BACKLIGHT_WT60_C)
+        bool enabled = !(
+        // LB6 not present on WT60-B
+#if defined(RGB_BACKLIGHT_WT60_B)
+                          ( index == 18+6 ) || // LB6
+#endif
+        // LB7 LB8 LB15 LB16 LB17 LC15 LD13 not present on WT60-B, WT60-BX, WT60-C
+                          ( index == 18+7 ) || // LB7
+                          ( index == 18+8 ) || // LB8
+                          ( index == 18+15 ) || // LB15
+                          ( index == 18+16 ) || // LB16
+                          ( index == 18+17 ) || // LB17
+                          ( index == 36+15 ) || // LC15
+                          ( index == 54+13 ) ); // LD13
 #elif defined(RGB_BACKLIGHT_ZEAL60)
         // LB6 LB7 LB8 LB15 LB16 LB17 not present on Zeal60
         bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5

keyboards/wilba_tech/zeal60/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "Zeal60", 
     "url": "https://zealpc.net", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 15, 
     "height": 5, 
     "layouts": {

keyboards/wilba_tech/zeal65/info.json

@@ -2,7 +2,6 @@
     "keyboard_name": "Zeal65", 
     "url": "https://zealpc.net", 
     "maintainer": "Wilba", 
-    "bootloader": "atmel-dfu", 
     "width": 16, 
     "height": 5, 
     "layouts": {

lib/python/qmk/cli/cformat.py

@@ -24,13 +24,14 @@ def cformat(cli):
     if cli.args.files:
         cli.args.files = [os.path.join(os.environ['ORIG_CWD'], file) for file in cli.args.files]
     else:
+        ignores = ['tmk_core/protocol/usb_hid', 'quantum/template']
         for dir in ['drivers', 'quantum', 'tests', 'tmk_core']:
             for dirpath, dirnames, filenames in os.walk(dir):
-                if 'tmk_core/protocol/usb_hid' in dirpath:
+                if any(i in dirpath for i in ignores):
-                    continue
+                    dirnames.clear()
 
                 for name in filenames:
-                    if name.endswith('.c') or name.endswith('.h') or name.endswith('.cpp'):
+                    if name.endswith(('.c', '.h', '.cpp')):
                         cli.args.files.append(os.path.join(dirpath, name))
 
     # Run clang-format on the files we've found

users/rossman360/rossman360.h

@@ -12,6 +12,13 @@
 #define XPANDR LCTL(LSFT(KC_X))
 #define CMDBSP MT(MOD_LGUI, KC_BSPC)
 #define ALTDEL MT(MOD_LALT, KC_DEL)
+#define TAB1 LCTL(KC_1)
+#define TAB2 LCTL(KC_2)
+#define TAB3 LCTL(KC_3)
+#define TAB4 LCTL(KC_4)
+#define CTRLSP MT(MOD_LCTL, KC_SPACE)
+#define RVOLU LCTL(KC_RBRC)
+#define RVOLD LCTL(KC_LBRC)
 
 // Define all of
 enum custom_keycodes {