Keyboard: CTRL and ALT keyboard json fix (#3816 )

Fixed incorrect layout names
Fix emulated EEPROM start address on STM32F303 (#3819 )
2018-08-31 07:38:06 -07:00 · 2018-08-31 07:37:13 -07:00 · 2018-08-30 15:38:31 -07:00 · 2018-08-30 13:49:17 -07:00 · 2018-08-30 09:37:05 -07:00 · 2018-08-30 09:34:14 -07:00
722 changed files with 94144 additions and 3132 deletions
@@ -144,6 +144,9 @@ endif
 ifdef MCU_FAMILY
    FIRMWARE_FORMAT?=bin
    PLATFORM=CHIBIOS
 else ifdef ARM_ATSAM
    PLATFORM=ARM_ATSAM
    FIRMWARE_FORMAT=bin
 else
    PLATFORM=AVR
    FIRMWARE_FORMAT?=hex
@@ -286,6 +289,11 @@ endif
    include $(TMK_PATH)/avr.mk
 endif
 ifeq ($(PLATFORM),ARM_ATSAM)
    include $(TMK_PATH)/arm_atsam.mk
    include $(TMK_PATH)/protocol/arm_atsam.mk
 endif
 ifeq ($(PLATFORM),CHIBIOS)
    include $(TMK_PATH)/protocol/chibios.mk
 endif
@@ -61,8 +61,8 @@ endif
 ifeq ($(strip $(STENO_ENABLE)), yes)
    OPT_DEFS += -DSTENO_ENABLE
-	VIRTSER_ENABLE := yes
+    VIRTSER_ENABLE := yes
-	SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
+    SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
 endif
 ifeq ($(strip $(VIRTSER_ENABLE)), yes)
@@ -75,9 +75,9 @@ ifeq ($(strip $(FAUXCLICKY_ENABLE)), yes)
 endif
 ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
-	OPT_DEFS += -DPOINTING_DEVICE_ENABLE
+    OPT_DEFS += -DPOINTING_DEVICE_ENABLE
-	OPT_DEFS += -DMOUSE_ENABLE
+    OPT_DEFS += -DMOUSE_ENABLE
-	SRC += $(QUANTUM_DIR)/pointing_device.c
+    SRC += $(QUANTUM_DIR)/pointing_device.c
 endif
 ifeq ($(strip $(UCIS_ENABLE)), yes)
@@ -110,12 +110,14 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
    ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
        OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
    else
-	    SRC += ws2812.c
+        SRC += ws2812.c
    endif
 endif
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
    OPT_DEFS += -DRGB_MATRIX_ENABLE
    OPT_DEFS += -DIS31FL3731
    COMMON_VPATH += $(DRIVER_PATH)/issi
    SRC += is31fl3731.c
    SRC += i2c_master.c
    SRC += $(QUANTUM_DIR)/color.c
@@ -123,6 +125,28 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
    CIE1931_CURVE = yes
 endif
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
    OPT_DEFS += -DRGB_MATRIX_ENABLE
    OPT_DEFS += -DIS31FL3731
    COMMON_VPATH += $(DRIVER_PATH)/issi
    SRC += is31fl3731.c
    SRC += i2c_master.c
    SRC += $(QUANTUM_DIR)/color.c
    SRC += $(QUANTUM_DIR)/rgb_matrix.c
    CIE1931_CURVE = yes
 endif
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
    OPT_DEFS += -DRGB_MATRIX_ENABLE
    OPT_DEFS += -DIS31FL3733
    COMMON_VPATH += $(DRIVER_PATH)/issi
    SRC += is31fl3733.c
    SRC += i2c_master.c
    SRC += $(QUANTUM_DIR)/color.c
    SRC += $(QUANTUM_DIR)/rgb_matrix.c
    CIE1931_CURVE = yes
 endif
 ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
    OPT_DEFS += -DTAP_DANCE_ENABLE
    SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c
@@ -169,7 +193,7 @@ ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
    ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
        CIE1931_CURVE = yes
    endif
-		ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
+        ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
        OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
    endif
 endif
@@ -200,7 +224,7 @@ endif
 ifeq ($(strip $(HD44780_ENABLE)), yes)
    SRC += drivers/avr/hd44780.c
-	OPT_DEFS += -DHD44780_ENABLE
+    OPT_DEFS += -DHD44780_ENABLE
 endif
 QUANTUM_SRC:= \
@@ -1,36 +1,51 @@
 * [Getting Started](README.md)
  * [QMK Introduction](getting_started_introduction.md)
  * [Install Build Tools](getting_started_build_tools.md)
    * Alternative: [Vagrant Guide](getting_started_vagrant.md)
  * [Build/Compile Instructions](getting_started_make_guide.md)
  * [Flashing Firmware](flashing.md)
  * [Contributing to QMK](contributing.md)
  * [How to Use Github](getting_started_github.md)
  * [Getting Help](getting_started_getting_help.md)
 * [Complete Newbs Guide](newbs.md)
  * [Getting Started](newbs_getting_started.md)
  * [Building Your First Firmware](newbs_building_firmware.md)
  * [Flashing Firmware](newbs_flashing.md)
  * [Testing and Debugging](newbs_testing_debugging.md)
 * [QMK Basics](README.md)
  * [QMK Introduction](getting_started_introduction.md)
  * [Contributing to QMK](contributing.md)
  * [How to Use Github](getting_started_github.md)
  * [Getting Help](getting_started_getting_help.md)
 * [FAQ](faq.md)
  * [General FAQ](faq_general.md)
  * [Build/Compile QMK](faq_build.md)
  * [Debugging/Troubleshooting QMK](faq_debug.md)
  * [Keymap](faq_keymap.md)
 * Detailed Guides
  * [Install Build Tools](getting_started_build_tools.md)
  * [Vagrant Guide](getting_started_vagrant.md)
  * [Build/Compile Instructions](getting_started_make_guide.md)
  * [Flashing Firmware](flashing.md)
  * [Customizing Functionality](custom_quantum_functions.md)
  * [Keymap Overview](keymap.md)
 * [Hardware](hardware.md)
  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
  * [AVR Processors](hardware_avr.md)
  * ARM Processors (TBD)
  * [Drivers](hardware_drivers.md)
 * Reference
  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
  * [Config Options](config_options.md)
  * [Keycodes](keycodes.md)
  * [Documentation Best Practices](documentation_best_practices.md)
  * [Documentation Templates](documentation_templates.md)
  * [Glossary](reference_glossary.md)
  * [Unit Testing](unit_testing.md)
  * [Useful Functions](ref_functions.md)
 * [Features](features.md)
  * [Basic Keycodes](keycodes_basic.md)
  * [Quantum Keycodes](quantum_keycodes.md)
  * [Advanced Keycodes](feature_advanced_keycodes.md)
  * [Audio](feature_audio.md)
  * [Auto Shift](feature_auto_shift.md)
  * [Backlight](feature_backlight.md)
  * [Bluetooth](feature_bluetooth.md)
  * [Bootmagic](feature_bootmagic.md)
  * [Command](feature_command.md)
  * [Dynamic Macros](feature_dynamic_macros.md)
@@ -40,6 +55,7 @@
  * [Leader Key](feature_leader_key.md)
  * [Macros](feature_macros.md)
  * [Mouse Keys](feature_mouse_keys.md)
  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
  * [Pointing Device](feature_pointing_device.md)
  * [PS/2 Mouse](feature_ps2_mouse.md)
  * [RGB Lighting](feature_rgblight.md)
@@ -53,34 +69,7 @@
  * [Thermal Printer](feature_thermal_printer.md)
  * [Unicode](feature_unicode.md)
  * [Userspace](feature_userspace.md)
-
+  * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
 * [Keycodes](keycodes.md)
  * [Basic](keycodes_basic.md)
  * [Quantum](quantum_keycodes.md)
  * [Audio](feature_audio.md#audio-keycodes)
  * [Backlight](feature_backlight.md#backlight-keycodes)
  * [Bluetooth](feature_bluetooth.md#bluetooth-keycodes)
  * [Bootmagic](feature_bootmagic.md#bootmagic-keycodes)
  * [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
  * [Mod+Key](feature_advanced_keycodes.md#modifier-keys)
  * [Mod Tap](feature_advanced_keycodes.md#mod-tap)
  * [Mouse Keys](feature_mouse_keys.md#mapping-mouse-actions-to-keyboard-keys)
  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
  * [RGB Light](feature_rgblight.md#rgblight-keycodes)
  * [RGB Matrix](feature_rgb_matrix.md#keycodes)
  * [Shifted Keys](keycodes_us_ansi_shifted.md)
  * [Stenography](feature_stenography.md#keycode-reference)
  * [Swap Hands](feature_swap_hands.md#swap-keycodes)
  * [Thermal Printer](feature_thermal_printer.md#thermal-printer-keycodes)
 * Reference
  * [Config Options](config_options.md)
  * [Customizing Functionality](custom_quantum_functions.md)
  * [Documentation Best Practices](documentation_best_practices.md)
  * [Documentation Templates](documentation_templates.md)
  * [Glossary](reference_glossary.md)
  * [Keymap Overview](keymap.md)
  * [Unit Testing](unit_testing.md)
 * For Makers and Modders
  * [Hand Wiring Guide](hand_wire.md)
@@ -1,36 +1,51 @@
 * [Getting Started](README.md)
  * [QMK Introduction](getting_started_introduction.md)
  * [Install Build Tools](getting_started_build_tools.md)
    * Alternative: [Vagrant Guide](getting_started_vagrant.md)
  * [Build/Compile Instructions](getting_started_make_guide.md)
  * [Flashing Firmware](flashing.md)
  * [Contributing to QMK](contributing.md)
  * [How to Use Github](getting_started_github.md)
  * [Getting Help](getting_started_getting_help.md)
 * [Complete Newbs Guide](newbs.md)
  * [Getting Started](newbs_getting_started.md)
  * [Building Your First Firmware](newbs_building_firmware.md)
  * [Flashing Firmware](newbs_flashing.md)
  * [Testing and Debugging](newbs_testing_debugging.md)
 * [QMK Basics](README.md)
  * [QMK Introduction](getting_started_introduction.md)
  * [Contributing to QMK](contributing.md)
  * [How to Use Github](getting_started_github.md)
  * [Getting Help](getting_started_getting_help.md)
 * [FAQ](faq.md)
  * [General FAQ](faq_general.md)
  * [Build/Compile QMK](faq_build.md)
  * [Debugging/Troubleshooting QMK](faq_debug.md)
  * [Keymap](faq_keymap.md)
 * Detailed Guides
  * [Install Build Tools](getting_started_build_tools.md)
  * [Vagrant Guide](getting_started_vagrant.md)
  * [Build/Compile Instructions](getting_started_make_guide.md)
  * [Flashing Firmware](flashing.md)
  * [Customizing Functionality](custom_quantum_functions.md)
  * [Keymap Overview](keymap.md)
 * [Hardware](hardware.md)
  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
  * [AVR Processors](hardware_avr.md)
  * ARM Processors (TBD)
  * [Drivers](hardware_drivers.md)
 * Reference
  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
  * [Config Options](config_options.md)
  * [Keycodes](keycodes.md)
  * [Documentation Best Practices](documentation_best_practices.md)
  * [Documentation Templates](documentation_templates.md)
  * [Glossary](reference_glossary.md)
  * [Unit Testing](unit_testing.md)
  * [Useful Functions](ref_functions.md)
 * [Features](features.md)
  * [Basic Keycodes](keycodes_basic.md)
  * [Quantum Keycodes](quantum_keycodes.md)
  * [Advanced Keycodes](feature_advanced_keycodes.md)
  * [Audio](feature_audio.md)
  * [Auto Shift](feature_auto_shift.md)
  * [Backlight](feature_backlight.md)
  * [Bluetooth](feature_bluetooth.md)
  * [Bootmagic](feature_bootmagic.md)
  * [Command](feature_command.md)
  * [Dynamic Macros](feature_dynamic_macros.md)
@@ -40,6 +55,7 @@
  * [Leader Key](feature_leader_key.md)
  * [Macros](feature_macros.md)
  * [Mouse Keys](feature_mouse_keys.md)
  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
  * [Pointing Device](feature_pointing_device.md)
  * [PS/2 Mouse](feature_ps2_mouse.md)
  * [RGB Lighting](feature_rgblight.md)
@@ -53,34 +69,7 @@
  * [Thermal Printer](feature_thermal_printer.md)
  * [Unicode](feature_unicode.md)
  * [Userspace](feature_userspace.md)
-
+  * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
 * [Keycodes](keycodes.md)
  * [Basic](keycodes_basic.md)
  * [Quantum](quantum_keycodes.md)
  * [Audio](feature_audio.md#audio-keycodes)
  * [Backlight](feature_backlight.md#backlight-keycodes)
  * [Bluetooth](feature_bluetooth.md#bluetooth-keycodes)
  * [Bootmagic](feature_bootmagic.md#bootmagic-keycodes)
  * [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
  * [Mod+Key](feature_advanced_keycodes.md#modifier-keys)
  * [Mod Tap](feature_advanced_keycodes.md#mod-tap)
  * [Mouse Keys](feature_mouse_keys.md#mapping-mouse-actions-to-keyboard-keys)
  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
  * [RGB Light](feature_rgblight.md#rgblight-keycodes)
  * [RGB Matrix](feature_rgb_matrix.md#keycodes)
  * [Shifted Keys](keycodes_us_ansi_shifted.md)
  * [Stenography](feature_stenography.md#keycode-reference)
  * [Swap Hands](feature_swap_hands.md#swap-keycodes)
  * [Thermal Printer](feature_thermal_printer.md#thermal-printer-keycodes)
 * Reference
  * [Config Options](config_options.md)
  * [Customizing Functionality](custom_quantum_functions.md)
  * [Documentation Best Practices](documentation_best_practices.md)
  * [Documentation Templates](documentation_templates.md)
  * [Glossary](reference_glossary.md)
  * [Keymap Overview](keymap.md)
  * [Unit Testing](unit_testing.md)
 * For Makers and Modders
  * [Hand Wiring Guide](hand_wire.md)
@@ -1,7 +1,9 @@
-A QMK collaborator is a keyboard maker/designer that is interested in helping QMK grow and fully support their keyboard(s), and encouraging their users/customers to submit features, ideas, and keymaps. We're always looking to add more keyboards and collaborators, but we ask that they fulfill these requirements:
+# Becoming a QMK Collaborator
-* **Have a PCB available for sale** - unfortunately there's just too much variation and complications with handwired keyboards.
+A QMK collaborator is a keyboard maker or designer that is interested in helping QMK grow and fully support their keyboard(s), and encouraging their users and customers to submit features, ideas, and keymaps. We're always looking to add more keyboards and collaborators, but we ask that they fulfill these requirements:
-* **Maintain the your keyboard's directory** - this may just require an initial setup to get your keyboard working, but it could also include accommodating changes made to QMK's core.
+
-* **Approve and merge your keyboard's keymap pull requests** - we like to encourage users to contribute their keymaps for others to see and work from when creating their own.
+* **Have a PCB available for sale.** Unfortunately there's just too much variation and complications with handwired keyboards.
 * **Maintain your keyboard in QMK.** This may just require an initial setup to get your keyboard working, but it could also include accommodating changes made to QMK's core that might break or render any custom code redundant.
 * **Approve and merge keymap pull requests for your keyboard.** We like to encourage users to contribute their keymaps for others to see and work from when creating their own.
 If you feel you meet these requirements, shoot us an email at hello@qmk.fm with an introduction and some links to your keyboard!
@@ -13,9 +13,11 @@ People often define custom names using `#define`. For example:
 This will allow you to use `FN_CAPS` and `ALT_TAB` in your `KEYMAP()`, keeping it more readable.
-### Limits of These Aliases
+### Caveats
-Currently, the keycodes able to used with these functions are limited to the [Basic Keycodes](keycodes_basic.md), meaning you can't use keycodes like `KC_TILD`, or anything greater than 0xFF. For a full list of the keycodes able to be used see [Basic Keycodes](keycodes_basic.md).
+Currently, `LT()` and `MT()` are limited to the [Basic Keycode set](keycodes_basic.md), meaning you can't use keycodes like `LCTL()`, `KC_TILD`, or anything greater than `0xFF`. Modifiers specified as part of a Layer Tap or Mod Tap's keycode will be ignored.
 Additionally, if at least one right-handed modifier is specified in a Mod Tap or Layer Tap, it will cause all modifiers specified to become right-handed, so it is not possible to mix and match the two.
 # Switching and Toggling Layers
@@ -55,57 +57,73 @@ Sometimes, you might want to switch between layers in a macro or as part of a ta
 # Modifier Keys
-These functions allow you to combine a mod with a keycode. When pressed the keydown for the mod will be sent first, and then *kc* will be sent. When released the keyup for *kc* will be sent and then the mod will be sent.
+These allow you to combine a modifier with a keycode. When pressed, the keydown event for the modifier, then `kc` will be sent. On release, the keyup event for `kc`, then the modifier will be sent.
-* `LSFT(kc)` or `S(kc)` - applies left Shift to *kc* (keycode)
+|Key       |Aliases               |Description                                         |
-* `RSFT(kc)` - applies right Shift to *kc*
+|----------|----------------------|----------------------------------------------------|
-* `LCTL(kc)` - applies left Control to *kc*
+|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
-* `RCTL(kc)` - applies right Control to *kc*
+|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
-* `LALT(kc)` - applies left Alt to *kc*
+|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
-* `RALT(kc)` - applies right Alt to *kc*
+|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-* `LGUI(kc)` - applies left GUI (command/win) to *kc*
+|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
-* `RGUI(kc)` - applies right GUI (command/win) to *kc*
+|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
-* `HYPR(kc)` - applies Hyper (all modifiers) to *kc*
+|`RALT(kc)`|                      |Hold Right Alt and press `kc`                       |
-* `MEH(kc)`  - applies Meh (all modifiers except Win/Cmd) to *kc*
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
-* `LCAG(kc)` - applies CtrlAltGui to *kc*
+|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
 |`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
 |`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
 |`ALTG(kc)`|                      |Hold Right Control and Alt and press `kc`           |
 |`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
 |`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
-You can also chain these, like this:
+You can also chain them, for example `LCTL(LALT(KC_DEL))` makes a key that sends Control+Alt+Delete with a single keypress.
-    LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress.
+# Mod-Tap
-# Mod Tap
+The Mod-Tap key `MT(mod, kc)` acts like a modifier when held, and a regular keycode when tapped. In other words, you can have a key that sends Escape when you tap it, but functions as a Control or Shift key when you hold it down.
-`MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down.
+The modifiers this keycode and `OSM()` accept are prefixed with `MOD_`, not `KC_`:
-These are the values you can use for the `mod` in `MT()` and `OSM()`:
+|Modifier  |Description                             |
 |----------|----------------------------------------|
 |`MOD_LCTL`|Left Control                            |
 |`MOD_LSFT`|Left Shift                              |
 |`MOD_LALT`|Left Alt                                |
 |`MOD_LGUI`|Left GUI (Windows/Command/Meta key)     |
 |`MOD_RCTL`|Right Control                           |
 |`MOD_RSFT`|Right Shift                             |
 |`MOD_RALT`|Right Alt                               |
 |`MOD_RGUI`|Right GUI (Windows/Command/Meta key)    |
 |`MOD_HYPR`|Hyper (Left Control, Shift, Alt and GUI)|
 |`MOD_MEH` |Meh (Left Control, Shift, and Alt)      |
-  * MOD_LCTL
+You can combine these by ORing them together like so:
  * MOD_LSFT
  * MOD_LALT
  * MOD_LGUI
  * MOD_RCTL
  * MOD_RSFT
  * MOD_RALT
  * MOD_RGUI
  * MOD_HYPR
  * MOD_MEH
-These can also be combined like `MOD_LCTL | MOD_LSFT` e.g. `MT(MOD_LCTL | MOD_LSFT, KC_ESC)` which would activate Control and Shift when held, and send Escape when tapped.
+```c
 MT(MOD_LCTL | MOD_LSFT, KC_ESC)
 ```
-We've added shortcuts to make common modifier/tap (mod-tap) mappings more compact:
+This key would activate Left Control and Left Shift when held, and send Escape when tapped.
-  * `CTL_T(kc)` - is LCTL when held and *kc* when tapped
+For convenience, QMK includes some Mod-Tap shortcuts to make common combinations more compact in your keymap:
  * `SFT_T(kc)` - is LSFT when held and *kc* when tapped
  * `ALT_T(kc)` - is LALT when held and *kc* when tapped
  * `ALGR_T(kc)` - is AltGr when held and *kc* when tapped
  * `GUI_T(kc)` - is LGUI when held and *kc* when tapped
  * `ALL_T(kc)` - is Hyper (all mods) when held and *kc* when tapped. To read more about what you can do with a Hyper key, see [this blog post by Brett Terpstra](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)
  * `LCAG_T(kc)` - is CtrlAltGui when held and *kc* when tapped
  * `MEH_T(kc)` - is like Hyper, but not as cool -- does not include the Cmd/Win key, so just sends Alt+Ctrl+Shift.
-?> Due to the way that keycodes are structured, any modifiers specified as part of `kc`, such as `LCTL()` or `KC_LPRN`, will only activate when held instead of tapped.
+|Key         |Aliases                                |Description                                            |
-
+|------------|---------------------------------------|-------------------------------------------------------|
-?> Additionally, if there is at least one right-handed modifier, any other modifiers in a chain of functions will turn into their right-handed equivalents, so it is not possible to "mix and match" the two.
+|`LCTL_T(kc)`|`CTL_T(kc)`                            |Left Control when held, `kc` when tapped               |
 |`RCTL_T(kc)`|                                       |Right Control when held, `kc` when tapped              |
 |`LSFT_T(kc)`|`SFT_T(kc)`                            |Left Shift when held, `kc` when tapped                 |
 |`RSFT_T(kc)`|                                       |Right Shift when held, `kc` when tapped                |
 |`LALT_T(kc)`|`ALT_T(kc)`                            |Left Alt when held, `kc` when tapped                   |
 |`RALT_T(kc)`|`ALGR_T(kc)`                           |Right Alt when held, `kc` when tapped                  |
 |`LGUI_T(kc)`|`LCMD_T(kc)`, `RWIN_T(kc)`, `GUI_T(kc)`|Left GUI when held, `kc` when tapped                   |
 |`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`             |Right GUI when held, `kc` when tapped                  |
 |`C_S_T(kc)` |                                       |Left Control and Shift when held, `kc` when tapped     |
 |`MEH_T(kc)` |                                       |Left Control, Shift and Alt when held, `kc` when tapped|
 |`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
 |`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
 |`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 |`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
 |`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
 # One Shot Keys
@@ -51,3 +51,22 @@ In this way `OCRxx` essentially controls the duty cycle of the LEDs, and thus th
 The breathing effect is achieved by registering an interrupt handler for `TIMER1_OVF_vect` that is called whenever the counter resets, roughly 244 times per second.
 In this handler, the value of an incrementing counter is mapped onto a precomputed brightness curve. To turn off breathing, the interrupt handler is simply disabled, and the brightness reset to the level stored in EEPROM.
 ## Backlight Functions
 |Function  |Description                                               |
 |----------|----------------------------------------------------------|
 |`backlight_toggle()`   |Turn the backlight on or off                 |
 |`backlight_step()`     |Cycle through backlight levels               |
 |`backlight_increase()` |Increase the backlight level                 |
 |`backlight_decrease()` |Decrease the backlight level                 |
 |`backlight_level(x)`   |Sets the backlight level to specified level  |
 |`get_backlight_level()`|Toggle backlight breathing                   |
 ### Backlight Breathing Functions
 |Function  |Description                                               |
 |----------|----------------------------------------------------------|
 |`breathing_toggle()`  |Turn the backlight breathing on or off        |
 |`breathing_enable()`  |Turns on backlight breathing                  |
 |`breathing_disable()` |Turns off backlight breathing                 |
@@ -53,6 +53,8 @@ but the `LAYOUT_<layout>` variable must be defined in `<folder>.h` as well.
 ## Tips for Making Layouts Keyboard-Agnostic
 ### Includes
 Instead of using `#include "planck.h"`, you can use this line to include whatever `<keyboard>.h` (`<folder>.h` should not be included here) file that is being compiled:
    #include QMK_KEYBOARD_H
@@ -72,3 +74,7 @@ For example:
 ```
 Note that the names are lowercase and match the folder/file names for the keyboard/revision exactly.
 ### Keymaps
 In order to support both split and non-split keyboards with the same layout, you need to use the keyboard agnostic `LAYOUT_<layout name>` macro in your keymap. For instance, in order for a Let's Split and Planck to share the same layout file, you need to use `LAYOUT_ortho_4x12` instead of `LAYOUT_planck_grid` or just `{}` for a C array.
@@ -1,8 +1,12 @@
 # RGB Matrix Lighting
 ## Driver configuration
 ### IS31FL3731
 There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
-    RGB_MATRIX_ENABLE = yes
+    RGB_MATRIX_ENABLE = IS31FL3731
 Configure the hardware via your `config.h`:
@@ -36,7 +40,51 @@ Define these arrays listing all the LEDs in your `<keyboard>.c`:
 	    ....
 	}
-Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf). The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
+Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
 ###  IS31FL3733
 There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`:
    RGB_MATRIX_ENABLE = IS31FL3733
 Configure the hardware via your `config.h`:
 	// This is a 7-bit address, that gets left-shifted and bit 0
 	// set to 0 for write, 1 for read (as per I2C protocol)
 	// The address will vary depending on your wiring:
 	// 00 <-> GND
 	// 01 <-> SCL
 	// 10 <-> SDA
 	// 11 <-> VCC
 	// ADDR1 represents A1:A0 of the 7-bit address.
 	// ADDR2 represents A3:A2 of the 7-bit address.
 	// The result is: 0b101(ADDR2)(ADDR1)
 	#define DRIVER_ADDR_1 0b1010000
 	#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
 	#define DRIVER_COUNT 1
 	#define DRIVER_1_LED_TOTAL 64
 	#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
 Currently only a single drivers is supported, but it would be trivial to support all 4 combinations. For now define `DRIVER_ADDR_2` as `DRIVER_ADDR_1`
 Define these arrays listing all the LEDs in your `<keyboard>.c`:
 	const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
 	/* Refer to IS31 manual for these locations
 	 *   driver
 	 *   |  R location
 	 *   |  |       G location
 	 *   |  |       |       B location
 	 *   |  |       |       | */
 	    {0, B_1,    A_1,    C_1},
 	    ....
 	}
 Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now).
 From this point forward the configuration is the same for all the drivers. 
 	const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
 	/* {row | col << 4}
@@ -26,6 +26,10 @@ You can make use of uGFX within QMK to drive character and graphic LCD's, LED ar
 Support for WS2811/WS2812{a,b,c} LED's. For more information see the [RGB Light](feature_rgblight.md) page.
-## IS31FL3731 (AVR Only)
+## IS31FL3731
 Support for up to 2 drivers. Each driver impliments 2 charlieplex matrices to individually address LEDs using I2C. This allows up to 144 same color LEDs or 32 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page.
 ## IS31FL3733
 Support for up to a single driver with room for expansion. Each driver can control 192 individual LEDs or 64 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page.
@@ -318,7 +318,7 @@ This is a reference only. Each group of keys links to the page documenting their
 ## [Modifiers](feature_advanced_keycodes.md#modifier-keys)
 |Key       |Aliases               |Description                                         |
-|----------|----------            |----------------------------------------------------|
+|----------|----------------------|----------------------------------------------------|
 |`KC_HYPR` |                      |Hold Left Control, Shift, Alt and GUI               |
 |`KC_MEH`  |                      |Hold Left Control, Shift and Alt                    |
 |`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
@@ -353,7 +353,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
 |`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
 |`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
-|`SCMD_T(kc)`|`SWIN_T(kc)`                           |Left Shift and GUI when held, `kc` when tapped         |
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
 |`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
 ## [RGB Lighting](feature_rgblight.md)
@@ -0,0 +1,48 @@
 # List of Useful Core Functions To Make Your Keyboard Better
 There are a lot of hidden functions in QMK that are incredible useful, or may add a bit of functionality that you've been wanting.  Functions that are specific to certain features are not included here, as those will be on their respective feature page. 
 ## (OLKB) Tri Layers
 There are actually separate functions that you can use there, depending on what you're after. 
 The first is the `update_tri_layer(x, y, z)` function.   This function check to see if layers `x` and `y` are both on. If they are both on, then it runs on layer `z`.  Otherwise, if both `x` and `y` are not both on (either only one is, or neither is), then it runs off layer `z`. 
 This function is useful if you want to create specific keys that have this functionality, but other layer keycodes won't do this. 
 The other function is `update_tri_layer_state(state, x, y, z)`.  This function is meant to be called from they [`layer_state_set_*` functions](custom_quantum_functions.md#layer-change-code).  This means that any time that you use a keycode to change the layer, this will be checked.  So you could use `LT(layer, kc)` to change the layer and it will trigger the same layer check. 
 The caveat to this method is that you cannot access the `z` layer without having `x` and `y` layers on, since if you try to activate just layer `z`, it will run this code and turn off layer `z` before you could use it. 
 ## Setting the Persistent Default Layer
 Do you want to set the default layer, so that it's retained even after you unplug the board?  If so, this is the function for you. 
 To use this, you would use `set_single_persistent_default_layer(layer)`.  If you have a name defined for your layer, you can use that instead (such as _QWERTY, _DVORAK or _COLEMAK). 
 This will set the default layer, update the persistent settings, and play a tune if you have [Audio](feature_audio.md) enabled on your board, and the default layer sounds set. 
 To configure the default layer sounds, you would want to define this in your `config.h` file, like this: 
 ```c
 #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
                              SONG(COLEMAK_SOUND), \
                              SONG(DVORAK_SOUND) \
                            }
 ```
 ?> There are a large number of predefined songs in [quantum/audio/song_list.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/audio/song_list.h) that you can use.
 ## Reseting the keyboard
 There is the `RESET` quantum keycode that you can use. But if you want to reset the board as part of a macro, rather than hitting a key separately, you can do that. 
 And to do so, add `reset_keyboard()` to your function or macro, and this will reset to bootloader.
 ## Wiping the EEPROM (Persistent Storage)
 If you're having issues with Audio, RGB Underglow, backlighting or keys acting weird, then you can reset the EEPROM (persistent setting storage).  Bootmagic is one way to do this, but if that isn't enabled, then you can use a custom macro to do so. 
 To wipe the EEPROM, run `eeconfig_init()` from your function or macro to reset most of the settings to default. 
@@ -12,7 +12,7 @@ You can think of QMK as no different from any other computer program. It is star
 The reason for this is the different platforms that QMK supports. The most common platform is `lufa`, which runs on AVR processors such at the atmega32u4. We also support `chibios` and `vusb`.
-We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/protocol/lufa/lufa.c#L1129). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/protocol/lufa/lufa.c#L1182). This is [The Main Loop](#the_main_loop).
+We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1019). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1060). This is [The Main Loop](#the-main-loop).
 ## The Main Loop
@@ -22,7 +22,7 @@ This section of code is called "The Main Loop" because it's responsible for loop
    keyboard_task();
 ```
-This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keyboard.c#L154), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
+This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/common/keyboard.c#L206), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
 Within `keyboard_task()` you'll find code to handle:
@@ -77,7 +77,7 @@ At the keyboard level we define a C macro (typically named `KEYMAP()`) which map
 Notice how the second block of our `KEYMAP()` macro matches the Matrix Scanning array above? This macro is what will map the matrix scanning array to keycodes. However, if you look at a 17 key numpad you'll notice that it has 3 places where the matrix could have a switch but doesn't, due to larger keys. We have populated those spaces with `KC_NO` so that our keymap definition doesn't have to.
-You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
+You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
 ##### Keycode Assignment
@@ -129,27 +129,32 @@ Comparing against our keymap we can see that the pressed key is KC_NLCK. From he
 <!-- FIXME: Magic happens between here and process_record -->
 ##### Process Record
 The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions.  Depending on options set in rule.mk or elsewhere, only a subset of the functions below will be included in final firmware.
-The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is described below, using cluecard whenever we need to look at the keyboard/keymap level functions.
+* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/tmk_core/common/action.c#L172)
-
+  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L193)
-* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/action.c#L128)
+    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L213)
-  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/quantum.c#L140)
+    * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_tap_dance.c#L115)
-    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/master/quantum/quantum.c#L143)
+    * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_key_lock.c#L62)
-    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/card/card.c#L20)
+    * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_clicky.c#L44)
-      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
+    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/card.c#L20)
-    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_midi.c#L102)
+      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
-    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_audio.c#L10)
+    * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/fdd0f915271f79b104aa5d216566bcc3fd134e85/quantum/rgb_matrix.c#L139)
-    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_music.c#L69)
+    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_midi.c#L81)
-    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_tap_dance.c#L75)
+    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_audio.c#L19)
-    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_leader.c#L32)
+    * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_steno.c#L160)
-    * [`bool process_chording(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_chording.c#L41)
+    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_music.c#L114)
-    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_combo.c#L115)
+    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_tap_dance.c#L136)
-    * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_unicode.c#L22)
+    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_leader.c#L38)
-    * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_ucis.c#L91)
+    * [`bool process_chording(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_chording.c#L41)
-    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_printer.c#L77)
+    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_combo.c#L115)
-    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_auto_shift.c#L47)
+    * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicode.c#L22)
-    * [`bool process_unicode_map(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_unicodemap.c#L47)
+    * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_ucis.c#L91)
-    * [Identify and process quantum specific keycodes](https://github.com/qmk/qmk_firmware/blob/master/quantum/quantum.c#L211)
+    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_printer.c#L77)
    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_auto_shift.c#L94)
    * [`bool process_unicode_map(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicodemap.c#L47)
    * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_terminal.c#L264)
    * [Identify and process quantum specific keycodes](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/quantum.c#L287)
 At any step during this chain of events a function (such as `process_record_kb()`) can `return false` to halt all further processing.
@@ -15,12 +15,14 @@
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-/* This library follows the convention of the AVR i2c_master library.
+/* This library is only valid for STM32 processors.
 * This library follows the convention of the AVR i2c_master library.
 * As a result addresses are expected to be already shifted (addr << 1).
 * I2CD1 is the default driver which corresponds to pins B6 and B7. This
 * can be changed.
 * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
- * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
 * but using any other I2C pins should be trivial.
 */
 #include "i2c_master.h"
@@ -41,7 +43,7 @@ static const I2CConfig i2cconfig = {
 void i2c_init(void)
 {
-  palSetGroupMode(GPIOB,6,7, PAL_MODE_INPUT);       // Try releasing special pins for a short time
+  palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); // Try releasing special pins for a short time
  chThdSleepMilliseconds(10);
  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
@@ -82,12 +84,12 @@ uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t l
  {
    complete_packet[i+1] = data[i];
  }
-  complete_packet[0] = regaddr
+  complete_packet[0] = regaddr;
  return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
 }
-uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
 {
  i2c_address = devaddr;
  i2cStart(&I2C_DRIVER, &i2cconfig);
@@ -97,7 +99,6 @@ uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t le
 // This is usually not needed. It releases the driver to allow pins to become GPIO again.
 uint8_t i2c_stop(uint16_t timeout)
 {
  i2c_address = address;
  i2cStop(&I2C_DRIVER);
  return 0;
 }
@@ -35,5 +35,5 @@ uint8_t i2c_start(uint8_t address);
 uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
+uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-void i2c_stop(void);
+uint8_t i2c_stop(uint16_t timeout);
@@ -91,7 +91,7 @@ bool g_led_control_registers_update_required = false;
 // 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
-void IS31_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
 {
    g_twi_transfer_buffer[0] = reg;
    g_twi_transfer_buffer[1] = data;
@@ -106,7 +106,7 @@ void IS31_write_register( uint8_t addr, uint8_t reg, uint8_t data )
  #endif
 }
-void IS31_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
 {
    // assumes bank is already selected
@@ -135,7 +135,7 @@ void IS31_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
    }
 }
-void IS31_init( uint8_t addr )
+void IS31FL3731_init( uint8_t addr )
 {
    // In order to avoid the LEDs being driven with garbage data
    // in the LED driver's PWM registers, first enable software shutdown,
@@ -143,10 +143,10 @@ void IS31_init( uint8_t addr )
    // then disable software shutdown.
    // select "function register" bank
-    IS31_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
    // enable software shutdown
-    IS31_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
+    IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
    // this delay was copied from other drivers, might not be needed
    #ifdef __AVR__
    _delay_ms( 10 );
@@ -155,47 +155,47 @@ void IS31_init( uint8_t addr )
    #endif
    // picture mode
-    IS31_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
+    IS31FL3731_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
    // display frame 0
-    IS31_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
+    IS31FL3731_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
    // audio sync off
-    IS31_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
+    IS31FL3731_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
    // select bank 0
-    IS31_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
    // turn off all LEDs in the LED control register
    for ( int i = 0x00; i <= 0x11; i++ )
    {
-        IS31_write_register( addr, i, 0x00 );
+        IS31FL3731_write_register( addr, i, 0x00 );
    }
    // turn off all LEDs in the blink control register (not really needed)
    for ( int i = 0x12; i <= 0x23; i++ )
    {
-        IS31_write_register( addr, i, 0x00 );
+        IS31FL3731_write_register( addr, i, 0x00 );
    }
    // set PWM on all LEDs to 0
    for ( int i = 0x24; i <= 0xB3; i++ )
    {
-        IS31_write_register( addr, i, 0x00 );
+        IS31FL3731_write_register( addr, i, 0x00 );
    }
    // select "function register" bank
-    IS31_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
    // disable software shutdown
-    IS31_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
+    IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
    // select bank 0 and leave it selected.
    // most usage after initialization is just writing PWM buffers in bank 0
    // as there's not much point in double-buffering
-    IS31_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
 }
-void IS31_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
 {
    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
        is31_led led = g_is31_leds[index];
@@ -208,15 +208,15 @@ void IS31_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
    }
 }
-void IS31_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
 {
    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
    {
-        IS31_set_color( i, red, green, blue );
+        IS31FL3731_set_color( i, red, green, blue );
    }
 }
-void IS31_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
 {
    is31_led led = g_is31_leds[index];
@@ -247,24 +247,24 @@ void IS31_set_led_control_register( uint8_t index, bool red, bool green, bool bl
 }
-void IS31_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
 {
    if ( g_pwm_buffer_update_required )
    {
-        IS31_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        IS31FL3731_write_pwm_buffer( addr1, g_pwm_buffer[0] );
-        IS31_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+        IS31FL3731_write_pwm_buffer( addr2, g_pwm_buffer[1] );
    }
    g_pwm_buffer_update_required = false;
 }
-void IS31_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
 {
    if ( g_led_control_registers_update_required )
    {
        for ( int i=0; i<18; i++ )
        {
-            IS31_write_register(addr1, i, g_led_control_registers[0][i] );
+            IS31FL3731_write_register(addr1, i, g_led_control_registers[0][i] );
-            IS31_write_register(addr2, i, g_led_control_registers[1][i] );
+            IS31FL3731_write_register(addr2, i, g_led_control_registers[1][i] );
        }
    }
 }
@@ -31,21 +31,21 @@ typedef struct is31_led {
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
-void IS31_init( uint8_t addr );
+void IS31FL3731_init( uint8_t addr );
-void IS31_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data );
-void IS31_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
-void IS31_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
-void IS31_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3731_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
-void IS31_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3731_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 #define C1_1  0x24
 #define C1_2  0x25
@@ -0,0 +1,253 @@
 /* Copyright 2017 Jason Williams
 * Copyright 2018 Jack Humbert
 * Copyright 2018 Yiancar
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #ifdef __AVR__
 #include <avr/interrupt.h>
 #include <avr/io.h>
 #include <util/delay.h>
 #else
 #include "wait.h"
 #endif
 #include "is31fl3733.h"
 #include <string.h>
 #include "i2c_master.h"
 #include "progmem.h"
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
 // The address will vary depending on your wiring:
 // 00 <-> GND
 // 01 <-> SCL
 // 10 <-> SDA
 // 11 <-> VCC
 // ADDR1 represents A1:A0 of the 7-bit address.
 // ADDR2 represents A3:A2 of the 7-bit address.
 // The result is: 0b101(ADDR2)(ADDR1)
 #define ISSI_ADDR_DEFAULT 0x50
 #define ISSI_COMMANDREGISTER 0xFD
 #define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
 #define ISSI_INTERRUPTMASKREGISTER 0xF0
 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1
 #define ISSI_PAGE_LEDCONTROL 0x00 //PG0
 #define ISSI_PAGE_PWM 0x01        //PG1
 #define ISSI_PAGE_AUTOBREATH 0x02 //PG2
 #define ISSI_PAGE_FUNCTION 0x03   //PG3
 #define ISSI_REG_CONFIGURATION 0x00 //PG3
 #define ISSI_REG_GLOBALCURRENT 0x01 //PG3
 #define ISSI_REG_RESET 0x11// PG3
 #define ISSI_REG_SWPULLUP 0x0F //PG3
 #define ISSI_REG_CSPULLUP 0x10 //PG3
 #ifndef ISSI_TIMEOUT
  #define ISSI_TIMEOUT 100
 #endif
 #ifndef ISSI_PERSISTENCE
  #define ISSI_PERSISTENCE 0
 #endif
 // Transfer buffer for TWITransmitData()
 uint8_t g_twi_transfer_buffer[20];
 // These buffers match the IS31FL3733 PWM registers.
 // The control buffers match the PG0 LED On/Off registers.
 // Storing them like this is optimal for I2C transfers to the registers.
 // We could optimize this and take out the unused registers from these
 // buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][192];
 bool g_pwm_buffer_update_required = false;
 uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
 bool g_led_control_registers_update_required = false;
 void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data )
 {
    g_twi_transfer_buffer[0] = reg;
    g_twi_transfer_buffer[1] = data;
  #if ISSI_PERSISTENCE > 0
    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
        break;
    }
  #else
    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
  #endif
 }
 void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
 {
    // assumes PG1 is already selected
    // transmit PWM registers in 12 transfers of 16 bytes
    // g_twi_transfer_buffer[] is 20 bytes
    // iterate over the pwm_buffer contents at 16 byte intervals
    for ( int i = 0; i < 192; i += 16 ) {
        g_twi_transfer_buffer[0] = i;
        // copy the data from i to i+15
        // device will auto-increment register for data after the first byte
        // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
        for ( int j = 0; j < 16; j++ ) {
            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
        }
    #if ISSI_PERSISTENCE > 0
      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
          break;
      }
    #else
      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
    #endif
    }
 }
 void IS31FL3733_init( uint8_t addr )
 {
    // In order to avoid the LEDs being driven with garbage data
    // in the LED driver's PWM registers, shutdown is enabled last.
    // Set up the mode and other settings, clear the PWM registers,
    // then disable software shutdown.
    // Unlock the command register.
    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
    // Select PG0
    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
    // Turn off all LEDs.
    for ( int i = 0x00; i <= 0x17; i++ )
    {
        IS31FL3733_write_register( addr, i, 0x00 );
    }
    // Unlock the command register.
    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
    // Select PG1
    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
    // Set PWM on all LEDs to 0
    // No need to setup Breath registers to PWM as that is the default.
    for ( int i = 0x00; i <= 0xBF; i++ )
    {
        IS31FL3733_write_register( addr, i, 0x00 );
    }
    // Unlock the command register.
    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
    // Select PG3
    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
    // Set global current to maximum.
    IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
    // Disable software shutdown.
    IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
    // Wait 10ms to ensure the device has woken up.
    #ifdef __AVR__
    _delay_ms( 10 );
    #else
    wait_ms(10);
    #endif
 }
 void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
 {
    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
        is31_led led = g_is31_leds[index];
        g_pwm_buffer[led.driver][led.r] = red;
        g_pwm_buffer[led.driver][led.g] = green;
        g_pwm_buffer[led.driver][led.b] = blue;
        g_pwm_buffer_update_required = true;
    }
 }
 void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
 {
    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
    {
        IS31FL3733_set_color( i, red, green, blue );
    }
 }
 void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
 {
    is31_led led = g_is31_leds[index];
  uint8_t control_register_r = led.r / 8;
  uint8_t control_register_g = led.g / 8;
  uint8_t control_register_b = led.b / 8;
  uint8_t bit_r = led.r % 8;
  uint8_t bit_g = led.g % 8;
  uint8_t bit_b = led.b % 8;
    if ( red ) {
        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
    } else {
        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
    }
    if ( green ) {
        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
    } else {
        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
    }
    if ( blue ) {
        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
    } else {
        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
    }
    g_led_control_registers_update_required = true;
 }
 void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
 {
    if ( g_pwm_buffer_update_required )
    {
        // Firstly we need to unlock the command register and select PG1
        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
        IS31FL3733_write_pwm_buffer( addr1, g_pwm_buffer[0] );
        //IS31FL3733_write_pwm_buffer( addr2, g_pwm_buffer[1] );
    }
    g_pwm_buffer_update_required = false;
 }
 void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
 {
    if ( g_led_control_registers_update_required )
    {
        // Firstly we need to unlock the command register and select PG0
        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
        for ( int i=0; i<24; i++ )
        {
            IS31FL3733_write_register(addr1, i, g_led_control_registers[0][i] );
            //IS31FL3733_write_register(addr2, i, g_led_control_registers[1][i] );
        }
    }
 }
@@ -0,0 +1,255 @@
 /* Copyright 2017 Jason Williams
 * Copyright 2018 Jack Humbert
 * Copyright 2018 Yiancar
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #ifndef IS31FL3733_DRIVER_H
 #define IS31FL3733_DRIVER_H
 #include <stdint.h>
 #include <stdbool.h>
 typedef struct is31_led {
  uint8_t driver:2;
  uint8_t r;
  uint8_t g;
  uint8_t b;
 } __attribute__((packed)) is31_led;
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 void IS31FL3733_init( uint8_t addr );
 void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data );
 void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
 void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
 void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
 void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
 void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
 void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
 #define A_1  0x00
 #define A_2  0x01
 #define A_3  0x02
 #define A_4  0x03
 #define A_5  0x04
 #define A_6  0x05
 #define A_7  0x06
 #define A_8  0x07
 #define A_9  0x08
 #define A_10  0x09
 #define A_11  0x0A
 #define A_12  0x0B
 #define A_13  0x0C
 #define A_14  0x0D
 #define A_15  0x0E
 #define A_16  0x0F
 #define B_1  0x10
 #define B_2  0x11
 #define B_3  0x12
 #define B_4  0x13
 #define B_5  0x14
 #define B_6  0x15
 #define B_7  0x16
 #define B_8  0x17
 #define B_9  0x18
 #define B_10  0x19
 #define B_11  0x1A
 #define B_12  0x1B
 #define B_13  0x1C
 #define B_14  0x1D
 #define B_15  0x1E
 #define B_16  0x1F
 #define C_1  0x20
 #define C_2  0x21
 #define C_3  0x22
 #define C_4  0x23
 #define C_5  0x24
 #define C_6  0x25
 #define C_7  0x26
 #define C_8  0x27
 #define C_9  0x28
 #define C_10  0x29
 #define C_11  0x2A
 #define C_12  0x2B
 #define C_13  0x2C
 #define C_14  0x2D
 #define C_15  0x2E
 #define C_16  0x2F
 #define D_1  0x30
 #define D_2  0x31
 #define D_3  0x32
 #define D_4  0x33
 #define D_5  0x34
 #define D_6  0x35
 #define D_7  0x36
 #define D_8  0x37
 #define D_9  0x38
 #define D_10  0x39
 #define D_11  0x3A
 #define D_12  0x3B
 #define D_13  0x3C
 #define D_14  0x3D
 #define D_15  0x3E
 #define D_16  0x3F
 #define E_1  0x40
 #define E_2  0x41
 #define E_3  0x42
 #define E_4  0x43
 #define E_5  0x44
 #define E_6  0x45
 #define E_7  0x46
 #define E_8  0x47
 #define E_9  0x48
 #define E_10  0x49
 #define E_11  0x4A
 #define E_12  0x4B
 #define E_13  0x4C
 #define E_14  0x4D
 #define E_15  0x4E
 #define E_16  0x4F
 #define F_1  0x50
 #define F_2  0x51
 #define F_3  0x52
 #define F_4  0x53
 #define F_5  0x54
 #define F_6  0x55
 #define F_7  0x56
 #define F_8  0x57
 #define F_9  0x58
 #define F_10  0x59
 #define F_11  0x5A
 #define F_12  0x5B
 #define F_13  0x5C
 #define F_14  0x5D
 #define F_15  0x5E
 #define F_16  0x5F
 #define G_1  0x60
 #define G_2  0x61
 #define G_3  0x62
 #define G_4  0x63
 #define G_5  0x64
 #define G_6  0x65
 #define G_7  0x66
 #define G_8  0x67
 #define G_9  0x68
 #define G_10  0x69
 #define G_11  0x6A
 #define G_12  0x6B
 #define G_13  0x6C
 #define G_14  0x6D
 #define G_15  0x6E
 #define G_16  0x6F
 #define H_1  0x70
 #define H_2  0x71
 #define H_3  0x72
 #define H_4  0x73
 #define H_5  0x74
 #define H_6  0x75
 #define H_7  0x76
 #define H_8  0x77
 #define H_9  0x78
 #define H_10  0x79
 #define H_11  0x7A
 #define H_12  0x7B
 #define H_13  0x7C
 #define H_14  0x7D
 #define H_15  0x7E
 #define H_16  0x7F
 #define I_1  0x80
 #define I_2  0x81
 #define I_3  0x82
 #define I_4  0x83
 #define I_5  0x84
 #define I_6  0x85
 #define I_7  0x86
 #define I_8  0x87
 #define I_9  0x88
 #define I_10  0x89
 #define I_11  0x8A
 #define I_12  0x8B
 #define I_13  0x8C
 #define I_14  0x8D
 #define I_15  0x8E
 #define I_16  0x8F
 #define J_1  0x90
 #define J_2  0x91
 #define J_3  0x92
 #define J_4  0x93
 #define J_5  0x94
 #define J_6  0x95
 #define J_7  0x96
 #define J_8  0x97
 #define J_9  0x98
 #define J_10  0x99
 #define J_11  0x9A
 #define J_12  0x9B
 #define J_13  0x9C
 #define J_14  0x9D
 #define J_15  0x9E
 #define J_16  0x9F
 #define K_1  0xA0
 #define K_2  0xA1
 #define K_3  0xA2
 #define K_4  0xA3
 #define K_5  0xA4
 #define K_6  0xA5
 #define K_7  0xA6
 #define K_8  0xA7
 #define K_9  0xA8
 #define K_10  0xA9
 #define K_11  0xAA
 #define K_12  0xAB
 #define K_13  0xAC
 #define K_14  0xAD
 #define K_15  0xAE
 #define K_16  0xAF
 #define L_1  0xB0
 #define L_2  0xB1
 #define L_3  0xB2
 #define L_4  0xB3
 #define L_5  0xB4
 #define L_6  0xB5
 #define L_7  0xB6
 #define L_8  0xB7
 #define L_9  0xB8
 #define L_10  0xB9
 #define L_11  0xBA
 #define L_12  0xBB
 #define L_13  0xBC
 #define L_14  0xBD
 #define L_15  0xBE
 #define L_16  0xBF
 #endif // IS31FL3733_DRIVER_H
@@ -0,0 +1,43 @@
 /* Copyright 2018 MechMerlin
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "1up60hse.h"
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 	matrix_init_user();
 }
 void matrix_scan_kb(void) {
 	// put your looping keyboard code here
 	// runs every cycle (a lot)
 	matrix_scan_user();
 }
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 	// put your per-action keyboard code here
 	// runs for every action, just before processing by the firmware
 	return process_record_user(keycode, record);
 }
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
 	led_set_user(usb_led);
 }
@@ -0,0 +1,39 @@
 /* Copyright 2018 MechMerlin
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #ifndef KB_H
 #define KB_H
 #include "quantum.h"
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguments representing the physical
 // layout of the board and position of the keys
 // The second converts the arguments into a two-dimensional array which 
 // represents the switch matrix. 
 #define LAYOUT_60_ansi( \
 	K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
 	K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
 	K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
 	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A,           K3D, \
 	K40, K41, K42,             K45,              K49, K4A, K4B,      K4D  \
 ) { \
 	{ K00,  K01,  K02,  K03,   K04,   K05, K06,   K07,   K08,   K09, K0A, K0B,   K0C,   K0D }, \
 	{ K10,  K11,  K12,  K13,   K14,   K15, K16,   K17,   K18,   K19, K1A, K1B,   K1C,   K1D }, \
 	{ K20,  K21,  K22,  K23,   K24,   K25, K26,   K27,   K28,   K29, K2A, K2B,   KC_NO, K2D }, \
 	{ K30,  K31,  K32,  K33,   K34,   K35, K36,   K37,   K38,   K39, K3A, KC_NO, KC_NO, K3D }, \
 	{ K40,  K41,  K42,  KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B,   KC_NO, K4D }  \
 }
 #endif
@@ -0,0 +1,224 @@
 /*
 Copyright 2018 MechMerlin
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "config_common.h"
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x0000
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    1upkeyboards
 #define PRODUCT         1up60hse
 #define DESCRIPTION     A custom 60% keyboard
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 14
 /*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
 #define MATRIX_ROW_PINS { B3, B2, B1, B0, D4 }
 #define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, E6, D1, D0, D2, D3, D5, D6, D7 }
 #define UNUSED_PINS
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 5
 #define RGB_DI_PIN F0
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 14
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 #endif
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 /* number of backlight levels */
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Magic Key Options
 *
 * Magic keys are hotkey commands that allow control over firmware functions of
 * the keyboard. They are best used in combination with the HID Listen program,
 * found here: https://www.pjrc.com/teensy/hid_listen.html
 *
 * The options below allow the magic key functionality to be changed. This is
 * useful if your keyboard/keypad is missing keys and you want magic key support.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
 /* override magic key keymap */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
 //#define MAGIC_KEY_HELP1          H
 //#define MAGIC_KEY_HELP2          SLASH
 //#define MAGIC_KEY_DEBUG          D
 //#define MAGIC_KEY_DEBUG_MATRIX   X
 //#define MAGIC_KEY_DEBUG_KBD      K
 //#define MAGIC_KEY_DEBUG_MOUSE    M
 //#define MAGIC_KEY_VERSION        V
 //#define MAGIC_KEY_STATUS         S
 //#define MAGIC_KEY_CONSOLE        C
 //#define MAGIC_KEY_LAYER0_ALT1    ESC
 //#define MAGIC_KEY_LAYER0_ALT2    GRAVE
 //#define MAGIC_KEY_LAYER0         0
 //#define MAGIC_KEY_LAYER1         1
 //#define MAGIC_KEY_LAYER2         2
 //#define MAGIC_KEY_LAYER3         3
 //#define MAGIC_KEY_LAYER4         4
 //#define MAGIC_KEY_LAYER5         5
 //#define MAGIC_KEY_LAYER6         6
 //#define MAGIC_KEY_LAYER7         7
 //#define MAGIC_KEY_LAYER8         8
 //#define MAGIC_KEY_LAYER9         9
 //#define MAGIC_KEY_BOOTLOADER     PAUSE
 //#define MAGIC_KEY_LOCK           CAPS
 //#define MAGIC_KEY_EEPROM         E
 //#define MAGIC_KEY_NKRO           N
 //#define MAGIC_KEY_SLEEP_LED      Z
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */
 /* disable debug print */
 //#define NO_DEBUG
 /* disable print */
 //#define NO_PRINT
 /* disable action features */
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 /*
 * MIDI options
 */
 /* Prevent use of disabled MIDI features in the keymap */
 //#define MIDI_ENABLE_STRICT 1
 /* enable basic MIDI features:
   - MIDI notes can be sent when in Music mode is on
 */
 //#define MIDI_BASIC
 /* enable advanced MIDI features:
   - MIDI notes can be added to the keymap
   - Octave shift and transpose
   - Virtual sustain, portamento, and modulation wheel
   - etc.
 */
 //#define MIDI_ADVANCED
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 /*
 * HD44780 LCD Display Configuration
 */
 /*
 #define LCD_LINES           2     //< number of visible lines of the display
 #define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
 #define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
 #if LCD_IO_MODE
 #define LCD_PORT         PORTB        //< port for the LCD lines
 #define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
 #define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
 #define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
 #define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
 #define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
 #define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
 #define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
 #define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
 #define LCD_RS_PORT      LCD_PORT     //< port for RS line
 #define LCD_RS_PIN       3            //< pin  for RS line
 #define LCD_RW_PORT      LCD_PORT     //< port for RW line
 #define LCD_RW_PIN       2            //< pin  for RW line
 #define LCD_E_PORT       LCD_PORT     //< port for Enable line
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
@@ -0,0 +1,12 @@
 {
    "keyboard_name": "1up60hse",
    "url": "",
    "maintainer": "qmk",
    "width": 15,
    "height": 5,
    "layouts": {
        "LAYOUT_60_ansi": {
            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
        }
    }
 }
@@ -0,0 +1,19 @@
 /* Copyright 2018 MechMerlin
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 // place overrides here
@@ -0,0 +1,44 @@
 /* Copyright 2018 MechMerlin
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [0] = LAYOUT_60_ansi(
 		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, 
 		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
 		MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
 		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, 
 		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(2), KC_RGUI, KC_RCTL),
 	[1] = LAYOUT_60_ansi(
 		KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, 
 		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
 		KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
 		KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
  [2] = LAYOUT_60_ansi(
 		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
 		KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_STEP, BL_DEC, BL_INC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, 
 		KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, RGB_SAI, RGB_HUD, RGB_HUI, RGB_MOD, RGB_TOG, KC_TRNS, KC_TRNS, 
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
 };
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  return true;
 }
@@ -0,0 +1,6 @@
 # 1up60hse default keymap
 This is the default keymap provided by [1upkeyboards](https://www.1upkeyboards.com).  
 ## Notes
 - Software reset key is located on `Esc` on the third layer.
@@ -0,0 +1,15 @@
 # 1up60hse (hot swap edition)
 ![1up60hse](https://i2.wp.com/www.1upkeyboards.com/wp-content/uploads/2018/08/PCB-1up-60-hotswap-group-RGB.jpg?fit=1280%2C1280&ssl=1)
 A 60% PCB with USB C, RGB underglow, backlighting, hotswappable switches, and a standard ANSI layout.
 Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
 Hardware Supported: 1up60hse 60% PCB.  
 Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/controllers/1up-rgb-pcb-hse/)
 Make example for this keyboard (after setting up your build environment):
    make 1up60hse:default
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
@@ -0,0 +1,72 @@
 # MCU name
 #MCU = at90usb1286
 MCU = atmega32u4
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the
 #     processor frequency in Hz. You can then use this symbol in your source code to
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
 #     This will be an integer division of F_USB below, as it is sourced by
 #     F_USB after it has run through any CPU prescalers. Note that this value
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
 F_CPU = 16000000
 #
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
 ARCH = AVR8
 # Input clock frequency.
 #     This will define a symbol, F_USB, in all source code files equal to the
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
 #     at the end, this will be done automatically to create a 32-bit value in your
 #     source code.
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 # Boot Section Size in *bytes*
 #   Teensy halfKay   512
 #   Teensy++ halfKay 1024
 #   Atmel DFU loader 4096
 #   LUFA bootloader  4096
 #   USBaspLoader     2048
 OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = yes        # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 LAYOUTS = 60_ansi
@@ -0,0 +1,130 @@
 //****************************************************************************//
 // raffle's keymap for the 1up60rgb.                                          //
 //   emulates my pok3r layout and adds RGB control + firmware reset/debug     //
 //   layers                                                                   //
 //****************************************************************************//
 //************************ dependencies + definitions ************************//
 #include QMK_KEYBOARD_H
 // create names for layers
 enum layers {
  _typing,
  _raise,
  _rgb,
  _adjust
 };
 // define layer mods
 #define RAISE MO(_raise)
 #define RGB MO(_rgb)
 // define mod masks for making multi-key macros
 #define MODS_SHIFT_MASK  (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))
 #define MODS_CTRL_MASK  (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTRL))
 #define MODS_ALT_MASK  (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT))
 //********************************** Layers **********************************//
 // define layers
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  // typing layer to handle basic typing
  [_typing] = LAYOUT_all
  (
   KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
   KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
   KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
   KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
   RAISE, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, RGB, KC_RCTL
   ),
  // raise layer to handle function & nav keys
  [_raise] = LAYOUT_all
  (
   KC_GRV,  KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL,
   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_LSCR, KC_PAUSE, KC_TRNS,
   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, KC_DEL, KC_TRNS, KC_TRNS,
   KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
   ),
  // rgb layer for pretty backlight colors
  [_rgb] = LAYOUT_all
  (
   RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_HUI, RGB_VAI, RGB_HUD, KC_NO, KC_NO, KC_NO, KC_NO,
   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_MOD, RGB_SAI, RGB_VAD,RGB_SAD, KC_NO, KC_NO, KC_NO, KC_NO,
   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_RMOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
   ),
  // adjust to handle firmware debug + reset mode
  [_adjust] = LAYOUT_all
  (
   RESET, DEBUG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
   )
 };
 //***************************** Function bodies  *****************************//
 // enable tri-layer state for _raise + _rgb = _adjust
 uint32_t layer_state_set_user(uint32_t state) {
  return update_tri_layer_state(state, _raise, _rgb, _adjust);
 }
 // scan matrix
 void matrix_scan_user(void) {
 }
 // support for standard mod state keys (caps lock, scroll lock, etc.)
 void led_set_user(uint8_t usb_led) {
  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
  } else {
  }
  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
    DDRB |= (1 << 2); PORTB &= ~(1 << 2);
  } else {
    DDRB &= ~(1 << 2); PORTB &= ~(1 << 2);
  }
  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
  } else {
  }
  if (usb_led & (1 << USB_LED_COMPOSE)) {
  } else {
  }
  if (usb_led & (1 << USB_LED_KANA)) {
  } else {
  }
 }
 //*********** Empty fxns from default map that I'm not modifying ***********//
 // onboard macro support
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
  ;
  switch (id) {
  }
  return MACRO_NONE;
 }
 // initialize matrix 
 void matrix_init_user(void) {
 }
@@ -0,0 +1,43 @@
 ## raffle's keymap
 The default keymap is just enough to get started. This keymap adds a pok3r-like
 raise layer, backlight RGB control layer, and firmware reset/debug adjust layer
 for ANSI layouts.
 In the default layer, the following modifications are made (using standard ANSI
 keys for LHS):
 - `CAPS` = `LCTRL`
 - `LCTRL` = `RAISE`
 - `APP` = `RGB`
 - `LCTRL` + `APP` (`RAISE` + `RGB`) = `ADJUST`
 - `GRV` = `ESC`
 Additionally, the pok3r's `SHIFT` + `ESC` for `~` is maintained (with either `SHIFT`).
 ### Raise Layer
 Emulates standard pok3r layout (without the onboard macro keys)
 Highlights:
 - `IJKL` for arrow keys
 - `H`/`N` for `HOME`/`END`
 - `U`/`P` for `PGUP`/`PGDN`
 - `1` - `=` for `F1` - `F12`
 - `Y` for calculator
 Other standard keys from the pok3r layout are carried over. See the keymap or
 the pok3r documentation for details.
 ### RGB Layer
 Uses navigation keys from `RAISE` layer for RGB adjustment
 - `I`/`K` for Value (brightness) Increase/Decrease
 - `U`/`P` for Hue (color) Increase/Decrease
 - `H`/`N` for Saturation Incrase/Decrease
 - `GRV` to toggle RGB on/off
 - `1`-`9` to activate QMK's predefined RGB animations
 ### Adjust Layer
 - `GRV` activates firmware reset for flashing
 - `1` enters debug mode
@@ -0,0 +1,5 @@
 # 1UP Keyboards
 Website: [1UP Keyboards](https://www.1upkeyboards.com/)  
 Discord: [Server Invite](https://discordapp.com/invite/c6SYn8)  
 YouTube: [skiwithpete](https://www.youtube.com/user/skiwithpete)  
@@ -71,4 +71,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
-LAYOUT = ortho_4x4  ortho_4x8  ortho_4x12  ortho_4x16 
+LAYOUTS = ortho_4x4  ortho_4x8  ortho_4x12  ortho_4x16 
@@ -0,0 +1,29 @@
 #include "5x5.h"
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 	matrix_init_user();
 }
 void matrix_scan_kb(void) {
 	// put your looping keyboard code here
 	// runs every cycle (a lot)
 	matrix_scan_user();
 }
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 	// put your per-action keyboard code here
 	// runs for every action, just before processing by the firmware
 	return process_record_user(keycode, record);
 }
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
 	led_set_user(usb_led);
 }
@@ -0,0 +1,57 @@
 #ifndef FIVEX5_H
 #define FIVEX5_H
 #include "quantum.h"
 #define ___ KC_NO
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
 #define LAYOUT_ortho_5x5( \
    K00, K01, K02, K03, K04, \
    K10, K11, K12, K13, K14, \
    K20, K21, K22, K23, K24, \
    K30, K31, K32, K33, K34, \
    K40, K41, K42, K43, K44 \
 ) \
 { \
    { K00, K01, K02, K03, K04, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
    { K10, K11, K12, K13, K14, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
    { K20, K21, K22, K23, K24, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
    { K30, K31, K32, K33, K34, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___}, \
    { K40, K41, K42, K43, K44, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___} \
 }
 #define LAYOUT_ortho_5x10( \
    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, \
    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49 \
 ) \
 { \
    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, ___, ___, ___, ___, ___}, \
    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, ___, ___, ___, ___, ___}, \
    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, ___, ___, ___, ___, ___}, \
    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, ___, ___, ___, ___, ___}, \
    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, ___, ___, ___, ___, ___} \
 }
 #define LAYOUT_ortho_5x15( \
    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e, \
    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e, \
    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, \
    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, \
    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, K4d, K4e \
 ) \
 { \
    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, K0d, K0e}, \
    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, K1d, K1e}, \
    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e}, \
    { K30, K31, K32, K33, K34, K35, K35, K37, K38, K39, K3a, K3b, K3c, K3d, K3e}, \
    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, K4d, K4e} \
 }
 #endif
@@ -0,0 +1,208 @@
 #pragma once
 #include "config_common.h"
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x0A0C
 #define DEVICE_VER      0x05B5
 #define MANUFACTURER    di0ib
 #define PRODUCT         The 5x5 Keyboard
 #define DESCRIPTION     A 25 or 50 or 75 key keyboard
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 15
 /*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
 #define MATRIX_ROW_PINS { B2, D1, D0, D4, C6 }
 #define MATRIX_COL_PINS { D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 }
 #define UNUSED_PINS
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
 // #define RGBLIGHT_ANIMATIONS
 // #define RGBLED_NUM 16
 // #define RGBLIGHT_HUE_STEP 8
 // #define RGBLIGHT_SAT_STEP 8
 // #define RGBLIGHT_VAL_STEP 8
 // #endif
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 /* number of backlight levels */
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Magic Key Options
 *
 * Magic keys are hotkey commands that allow control over firmware functions of
 * the keyboard. They are best used in combination with the HID Listen program,
 * found here: https://www.pjrc.com/teensy/hid_listen.html
 *
 * The options below allow the magic key functionality to be changed. This is
 * useful if your keyboard/keypad is missing keys and you want magic key support.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
 /* override magic key keymap */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
 //#define MAGIC_KEY_HELP1          H
 //#define MAGIC_KEY_HELP2          SLASH
 //#define MAGIC_KEY_DEBUG          D
 //#define MAGIC_KEY_DEBUG_MATRIX   X
 //#define MAGIC_KEY_DEBUG_KBD      K
 //#define MAGIC_KEY_DEBUG_MOUSE    M
 //#define MAGIC_KEY_VERSION        V
 //#define MAGIC_KEY_STATUS         S
 //#define MAGIC_KEY_CONSOLE        C
 //#define MAGIC_KEY_LAYER0_ALT1    ESC
 //#define MAGIC_KEY_LAYER0_ALT2    GRAVE
 //#define MAGIC_KEY_LAYER0         0
 //#define MAGIC_KEY_LAYER1         1
 //#define MAGIC_KEY_LAYER2         2
 //#define MAGIC_KEY_LAYER3         3
 //#define MAGIC_KEY_LAYER4         4
 //#define MAGIC_KEY_LAYER5         5
 //#define MAGIC_KEY_LAYER6         6
 //#define MAGIC_KEY_LAYER7         7
 //#define MAGIC_KEY_LAYER8         8
 //#define MAGIC_KEY_LAYER9         9
 //#define MAGIC_KEY_BOOTLOADER     PAUSE
 //#define MAGIC_KEY_LOCK           CAPS
 //#define MAGIC_KEY_EEPROM         E
 //#define MAGIC_KEY_NKRO           N
 //#define MAGIC_KEY_SLEEP_LED      Z
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */
 /* disable debug print */
 //#define NO_DEBUG
 /* disable print */
 //#define NO_PRINT
 /* disable action features */
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 /*
 * MIDI options
 */
 /* Prevent use of disabled MIDI features in the keymap */
 //#define MIDI_ENABLE_STRICT 1
 /* enable basic MIDI features:
   - MIDI notes can be sent when in Music mode is on
 */
 //#define MIDI_BASIC
 /* enable advanced MIDI features:
   - MIDI notes can be added to the keymap
   - Octave shift and transpose
   - Virtual sustain, portamento, and modulation wheel
   - etc.
 */
 //#define MIDI_ADVANCED
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 /*
 * HD44780 LCD Display Configuration
 */
 /*
 #define LCD_LINES           2     //< number of visible lines of the display
 #define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
 #define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
 #if LCD_IO_MODE
 #define LCD_PORT         PORTB        //< port for the LCD lines
 #define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
 #define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
 #define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
 #define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
 #define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
 #define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
 #define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
 #define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
 #define LCD_RS_PORT      LCD_PORT     //< port for RS line
 #define LCD_RS_PIN       3            //< pin  for RS line
 #define LCD_RW_PORT      LCD_PORT     //< port for RW line
 #define LCD_RW_PIN       2            //< pin  for RW line
 #define LCD_E_PORT       LCD_PORT     //< port for Enable line
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
@@ -0,0 +1,5 @@
 #pragma once
 // place overrides here
@@ -0,0 +1,139 @@
 #include QMK_KEYBOARD_H
 #define PAD 0
 #define _QW 1
 #define NUM 2
 #define DIR 3
 // Readability keycodes
 #define _______ KC_TRNS
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 /* Single 5x5 board only
 * .--------------------------------------------.
 * | QWERTY |   /    |   *    |   -    |        |
 * |--------+--------+--------+--------+--------|
 * |   7    |   8    |   9    |   +    |        |
 * |--------+--------+--------+--------+--------|
 * |   4    |   5    |   6    |   +    |        |
 * |--------+--------+--------+--------+--------|
 * |   1    |   2    |   3    | ENTER  |        |
 * |--------+--------+--------+--------+--------|
 * |   0    |   0    |   .    | ENTER  |        |
 * '--------------------------------------------'
 */
  [PAD] = LAYOUT_ortho_5x5(
  DF(_QW), KC_PSLS, KC_PAST,   KC_PMNS, _______,
  KC_KP_7, KC_KP_8, KC_KP_9,   KC_PPLS, _______,
  KC_KP_4, KC_KP_5, KC_KP_6,   KC_PPLS, _______,
  KC_KP_1, KC_KP_2, KC_KP_3,   KC_PENT, _______,
  KC_KP_0, KC_KP_0, KC_KP_DOT, KC_PENT, _______
  ),
 /* QWERTY
 * .--------------------------------------------------------------------------------------------------------------------------------------.
 * |        | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |        |        |        |        |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
 * | ESC    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | BACKSP |   7    |   8    |   9    |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
 * | TAB    | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      |   4    |   5    |   6    |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
 * | SHIFT  | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | ENT/SFT|   1    |   2    |   3    |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
 * | LCTRL  | LGUI   | ALT    | ALT    | NUM    | SHIFT  | SPACE  | DIR    | RGUI   | RALT   | DEL    | CTRL   |   0    |   0    |   .    |
 * '--------------------------------------------------------------------------------------------------------------------------------------'
 */
  [_QW] = LAYOUT_ortho_5x15(
  _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, _______, _______, _______,
  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, KC_KP_7, KC_KP_8, KC_KP_9,
  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_KP_4, KC_KP_5, KC_KP_6,
  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, SFT_T(KC_ENT), KC_KP_1, KC_KP_2, KC_KP_3,
  KC_LCTL, KC_LGUI, KC_LALT, KC_LALT, MO(NUM), KC_LSFT, KC_SPC,  MO(DIR), KC_RGUI, KC_RALT, KC_DEL,  KC_RCTL, KC_KP_0, KC_KP_0, KC_KP_DOT
  ),
 /* NUMBERS
 * .--------------------------------------------------------------------------------------------------------------------------------------.
 * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
 * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | NUMLOCK|   /    |   *    |   -    |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
 * |    `   | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |        |        |        |   +    |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
 * |        | F11    | F12    |        |        |        | ENTER  | SHIFT  | RGUI   | ./ALT  | BKSC   |        |        |        | ENTER  |
 * |        |        |        |        |        |        |        |        |        |        |CTRLhold|		     |        |        |        |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
 * |        |        |        |        |        |        | ENTER  | SHIFT  |        |        |        |        |        |        |        |
 * '--------------------------------------------------------------------------------------------------------------------------------------'
 */
  [NUM] = LAYOUT_ortho_5x15(
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______,
  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     _______, _______, _______, KC_PPLS,
  _______, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT,
  _______, _______, _______, _______, _______, _______, KC_ENT,  KC_RSFT, _______, _______, _______,  _______, _______, _______, _______
  ),
 /* DIRECTIONS
 * .--------------------------------------------------------------------------------------------------------------------------------------.
 * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
 * | RESET  | TAB    |   up   |        | INS    | CTRL   | SHIFT  | PgUp   | Home   |   -    |   =    |  DEL   |        |        |        |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
 * | CAPSLK | left   |  down  | right  | PrScr  | SHIFT  | CTRL   | PgDn   | End    |   [    |   ]    |   \    |        |        |        |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
 * |        | P-Brk  |        |        |        |        |        |        | RGUI   | ALT    |        |        |        |        |        |
 * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
 * | KEYPAD |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
 * '--------------------------------------------------------------------------------------------------------------------------------------'
 */
  [DIR] = LAYOUT_ortho_5x15(
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
  RESET,   KC_TAB,  KC_UP,   _______, KC_INS,  KC_LCTL, KC_LSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL,  KC_DEL,  _______, _______, _______,
  KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_LCTL, KC_PGDN, KC_END,  KC_LBRC, KC_RBRC, KC_BSLS, _______, _______, _______,
  _______, KC_PAUS, _______, _______, _______, _______, _______, _______, KC_RGUI, KC_RALT, _______, _______, _______, _______, _______,
  DF(PAD), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
  ),
 };
 const uint16_t PROGMEM fn_actions[] = {
 };
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
  // MACRODOWN only works in this function
      switch(id) {
        case 0:
          if (record->event.pressed) {
            register_code(KC_RSFT);
          } else {
            unregister_code(KC_RSFT);
          }
        break;
      }
    return MACRO_NONE;
 };
 void matrix_init_user(void) {
 }
 void matrix_scan_user(void) {
 }
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  return true;
 }
 void led_set_user(uint8_t usb_led) {
 }
@@ -0,0 +1,23 @@
 # 5x5
 ![5x5](https://3.bp.blogspot.com/-bKOfUyMtdrE/WqGA_03kGZI/AAAAAAACPtY/DsHDTQS0IlMD3ie8HHlf1ATRUAwpZdcSgCLcBGAs/s1600/c.jpg)  
 ===  
 **Modular Keypad/Keyboard**  
 The basic unit is a 5x5 matrix with 25 keys. Up to 3 of these can be connected to each other side by side.  
 5x5, 5x10, and 5x15 matrices are possible.  
 There are pads for header pins on each side that complete the circuits from board to board. These can be permanently connected with solder bridges or temporarily with pin headers and shunt jumpers.  
 **_All configurations are powered by a SINGLE Arduino Micro or clone (NOT a Pro Micro)._**  
 * [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/5x5)
 Keyboard Maintainer: QMK Community  
 Hardware Supported: 5x5 PCB   
 Hardware Availability: [5x5 project on 40% Keyboards](http://www.40percent.club/2018/04/5x5.html)  
 Make example for this keyboard (after setting up your build environment):
    make 5x5:default
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.    
 First pass at adding support for the 4x4 keyboard. Compiles but completely untested. Intended to kick-start development.  
@@ -0,0 +1,74 @@
 # MCU name
 #MCU = at90usb1286
 MCU = atmega32u4
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the
 #     processor frequency in Hz. You can then use this symbol in your source code to
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
 #     This will be an integer division of F_USB below, as it is sourced by
 #     F_USB after it has run through any CPU prescalers. Note that this value
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
 F_CPU = 16000000
 #
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
 ARCH = AVR8
 # Input clock frequency.
 #     This will define a symbol, F_USB, in all source code files equal to the
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
 #     at the end, this will be done automatically to create a 32-bit value in your
 #     source code.
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 # Boot Section Size in *bytes*
 #   Teensy halfKay   512
 #   Teensy++ halfKay 1024
 #   Atmel DFU loader 4096
 #   LUFA bootloader  4096
 #   USBaspLoader     2048
 OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Bootloader
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
 #     different sizes, comment this out, and the correct address will be loaded
 #     automatically (+60). See bootloader.mk for all options.
 BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = yes        # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 LAYOUTS = ortho_5x5  ortho_5x10  ortho_5x15
@@ -5,12 +5,11 @@
  "width": 20.5,
  "height": 5.25,
  "layouts": {
-      "LAYOUT": {
+    "LAYOUT": {
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"\u2191", "x":15.25, "y":3.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}, {"label":"\u2190", "x":14.25, "y":4.25}, {"label":"\u2193", "x":15.25, "y":4.25}, {"label":"\u2192", "x":16.25, "y":4.25}]
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"↑", "x":15.25, "y":3.25}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"←", "x":14.25, "y":4.25}, {"label":"↓", "x":15.25, "y":4.25}, {"label":"→", "x":16.25, "y":4.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}]
-      },
+    },
-
+    "LAYOUT_split_bs": {
-      "LAYOUT_split_bs": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"↑", "x":15.25, "y":3.25}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"←", "x":14.25, "y":4.25}, {"label":"↓", "x":15.25, "y":4.25}, {"label":"→", "x":16.25, "y":4.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}]
-        "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Num Lock", "x":16.5, "y":0}, {"label":"/", "x":17.5, "y":0}, {"label":"*", "x":18.5, "y":0}, {"label":"-", "x":19.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"7", "x":16.5, "y":1}, {"label":"8", "x":17.5, "y":1}, {"label":"9", "x":18.5, "y":1}, {"label":"+", "x":19.5, "y":1, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":16.5, "y":2}, {"label":"5", "x":17.5, "y":2}, {"label":"6", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"1", "x":16.5, "y":3}, {"label":"2", "x":17.5, "y":3}, {"label":"3", "x":18.5, "y":3}, {"label":"Enter", "x":19.5, "y":3, "h":2}, {"label":"\u2191", "x":15.25, "y":3.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"x":3.5, "y":4, "w":7}, {"label":"Alt", "x":10.5, "y":4, "w":1.25}, {"label":"Win", "x":11.75, "y":4}, {"label":"Menu", "x":12.75, "y":4, "w":1.25}, {"label":"0", "x":17.5, "y":4}, {"label":".", "x":18.5, "y":4}, {"label":"\u2190", "x":14.25, "y":4.25}, {"label":"\u2193", "x":15.25, "y":4.25}, {"label":"\u2192", "x":16.25, "y":4.25}]
+    }
      }
  }
 }
@@ -60,7 +60,8 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
@@ -91,7 +91,7 @@
 	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 },  \
 	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 },  \
 	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  KC_NO }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_N), K313,  K314 },  \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 },  \
 	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }   \
 }
@@ -1,32 +1,18 @@
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	LAYOUT(
+#define HOME 0
-		KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, 
+#define MODS 1
-		KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TO(1), 
+#define MODS2 2
-		KC_Z, KC_X, KC_C, KC_V, MT(MOD_LSFT, KC_SPC), KC_B, KC_N, KC_M),
+#define OTHER 3
 	LAYOUT(
 		KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, 
 		KC_BSPC, KC_ESC, KC_TAB, KC_SCLN, KC_QUOT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TO(2), 
 		KC_LCTL, KC_LGUI, KC_LALT, TO(0), MT(MOD_LSFT, KC_ENT), KC_COMM, KC_DOT, KC_SLSH),
 	LAYOUT(
 		KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, 
 		KC_LSFT, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, TO(3), 
 		RGB_VAI, RGB_VAD, RGB_HUI, TO(0), RGB_MOD, KC_MPLY, KC_VOLD, KC_VOLU),
 	LAYOUT(
 		RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
 		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, 
 		KC_NO, KC_NO, KC_NO, KC_NO, M(0), KC_NO, KC_NO, KC_NO),
 enum custom_keycodes {
 	MACRO1
 };
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 	if (record->event.pressed) {
 		switch (keycode) {
-			case 0:
+			case MACRO1:
 				SEND_STRING("I'm so sorry... -PyroL");
 				return false;
 		}
@@ -34,43 +20,30 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 	return true;
 };
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	[HOME] = LAYOUT(
 		KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
 		KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TO(1),
 		KC_Z, KC_X, KC_C, KC_V, MT(MOD_LSFT, KC_SPC), KC_B, KC_N, KC_M),
 	[MODS] = LAYOUT(
 		KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
 		KC_BSPC, KC_ESC, KC_TAB, KC_SCLN, KC_QUOT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, TO(2),
 		KC_LCTL, KC_LGUI, KC_LALT, TO(0), MT(MOD_LSFT, KC_ENT), KC_COMM, KC_DOT, KC_SLSH),
 	[MODS2] = LAYOUT(
 		KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
 		KC_LSFT, KC_F11, KC_F12, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_GRV, TO(3),
 		RGB_VAI, RGB_VAD, RGB_HUI, TO(0), RGB_MOD, KC_MPLY, KC_VOLD, KC_VOLU),
 	[OTHER] = LAYOUT(
 		RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
 		KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
 		KC_NO, KC_NO, KC_NO, TO(0), MACRO1, KC_NO, KC_NO, KC_NO),
 };
 void matrix_init_user(void) {
 }
 void matrix_scan_user(void) {
 }
 void led_set_user(uint8_t usb_led) {
 	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
 	} else {
 	}
 	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
 	} else {
 	}
 	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
 	} else {
 	}
 	if (usb_led & (1 << USB_LED_COMPOSE)) {
 	} else {
 	}
 	if (usb_led & (1 << USB_LED_KANA)) {
 	} else {
 	}
 }
@@ -15,3 +15,5 @@ Make example for Alpha (after setting up your build environment):
    make alpha:default
 See [build environment setup](https://docs.qmk.fm/install-build-tools) then the [make instructions](https://docs.qmk.fm/faq/build-compile-qmk) for more information.
 Please see [PyrooL/Alpha](https://www.github.com/PyrooL/Alpha) for **build instructions**, parts lists, Gerbers, and case files.
@@ -116,7 +116,7 @@
    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
-    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \
+    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, XXX, k3d}, \
    {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, XXX, k4a, k4b, k4c, k4d}  \
 }
@@ -18,25 +18,28 @@
 #include "quantum.h"
 // readability
 #define XXX KC_NO
 // This a shortcut to help you visually see your layout.
 // The following is an example using the Planck MIT layout
 // The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
 #define LAYOUT( \
    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E,   K1F, K09, K0A, K0C, \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E,   K2F, K0B, K0F, K6F,\
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E,   K2F, K0B, K0F, K6F, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,   K3F, K0D,      K6D,\
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,        K3E, K3F, K0D, K6D, \
-    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E,   K4F,           K6E,\
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C,             K4D, K4E, K4F, K6E, \
-    K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E,   K5F, K0E, K07,\
+    K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D,        K5E, K5F, K0E, K07, \
-    K60, K61, K62, K63, K64, K65, K66,      K68, K69, K6A, K6B, K6C\
+    K60, K61, K62,                K63,                     K64, K65, K66, K68,   K69, K6A, K6B, K6C  \
 ) { \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K07, KC_NO,    KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F}, \
+    { XXX, XXX, XXX, XXX, XXX, XXX, XXX, K07, XXX, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F}, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F}, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F}, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \
-    { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47, KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F}, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F }, \
-    { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57, KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F}, \
+    { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E, K5F }, \
-    { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO,    KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F} \
+    { K60, K61, K62, K63, K64, K65, K66, XXX, K68, K69, K6A, K6B, K6C, K6D, K6E, K6F }  \
 }
@@ -170,8 +170,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
+#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
+#define NO_ACTION_FUNCTION
 /*
 * MIDI options
@@ -5,8 +5,9 @@
  "width": 19,
  "height": 6,
  "layouts": {
-      "LAYOUT": {
+    "LAYOUT": {
-          "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Scroll Lock", "x":14, "y":0}, {"label":"Pause", "x":15, "y":0}, {"label":"Num Lock", "x":16, "y":0}, {"label":"/", "x":17, "y":0}, {"label":"*", "x":18, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Insert", "x":15, "y":1}, {"label":"Home", "x":16, "y":1}, {"label":"PgUp", "x":17, "y":1}, {"label":"-", "x":18, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Delete", "x":15, "y":2}, {"label":"End", "x":16, "y":2}, {"label":"PgDn", "x":17, "y":2}, {"label":"7", "x":18, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"4", "x":15, "y":3}, {"label":"5", "x":16, "y":3}, {"label":"6", "x":17, "y":3}, {"label":"8", "x":18, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"1", "x":14, "y":4}, {"label":"\u2191", "x":15, "y":4}, {"label":"\u2190", "x":16, "y":4}, {"label":"\u2193", "x":17, "y":4}, {"label":"\u2192", "x":18, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.25}, {"label":"Win", "x":11.25, "y":5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5, "w":1.25}, {"label":"2", "x":15, "y":5}, {"label":".", "x":16, "y":5}, {"label":"3", "x":17, "y":5}, {"label":"9", "x":18, "y":5}]
+      "key_count": 103,
-      }
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"Print Screen", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Ins", "x":15, "y":0}, {"label":"Del", "x":16, "y":0}, {"label":"Page Up", "x":17, "y":0}, {"label":"Page Down", "x":18, "y":0}, {"label":"` ~", "x":0, "y":1}, {"label":"1 !", "x":1, "y":1}, {"label":"2 @", "x":2, "y":1}, {"label":"3 #", "x":3, "y":1}, {"label":"4 $", "x":4, "y":1}, {"label":"5 %", "x":5, "y":1}, {"label":"6 ^", "x":6, "y":1}, {"label":"7 &", "x":7, "y":1}, {"label":"8 *", "x":8, "y":1}, {"label":"9 (", "x":9, "y":1}, {"label":"0 )", "x":10, "y":1}, {"label":"- _", "x":11, "y":1}, {"label":"= +", "x":12, "y":1}, {"label":"Back Space", "x":13, "y":1}, {"label":"Back Space 2", "x":14, "y":1}, {"label":"Num Lock", "x":15, "y":1}, {"label":"/", "x":16, "y":1}, {"label":"*", "x":17, "y":1}, {"label":"-", "x":18, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"[ {", "x":11.5, "y":2}, {"label":"] }", "x":12.5, "y":2}, {"label":"\\ |", "x":13.5, "y":2, "w":1.5}, {"label":"7", "x":15, "y":2}, {"label":"8", "x":16, "y":2}, {"label":"9", "x":17, "y":2}, {"label":"+", "x":18, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":"; :", "x":10.75, "y":3}, {"label":"' \"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"4", "x":15, "y":3}, {"label":"5", "x":16, "y":3}, {"label":"6", "x":17, "y":3}, {"label":"+", "x":18, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"label":"ISO \\", "x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":", <", "x":9.25, "y":4}, {"label":". >", "x":10.25, "y":4}, {"label":"/ ?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"Up", "x":14, "y":4}, {"label":"1", "x":15, "y":4}, {"label":"2", "x":16, "y":4}, {"label":"3", "x":17, "y":4}, {"label":"Enter", "x":18, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"GUI", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"label":"Space", "x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.5}, {"label":"Fn", "x":11.5, "y":5, "w":1.5}, {"label":"Left", "x":13, "y":5}, {"label":"Down", "x":14, "y":5}, {"label":"Right", "x":15, "y":5}, {"label":"0", "x":16, "y":5}, {"label":".", "x":17, "y":5}, {"label":"Enter", "x":18, "y":5}]
    }
  }
 }
@@ -13,25 +13,27 @@
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#include "amj96.h"
+#include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-     LAYOUT(
+  [0] = LAYOUT(
-        ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, PSCR,PAUS,  INS, DEL, PGUP,PGDN, \
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_PAUS, KC_INS,  KC_DEL,  KC_PGUP, KC_PGDN, \
-        GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,NO,    NLCK,PSLS,PAST,PMNS, \
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_NO,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
-        TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,     BSLS,  P7,  P8,  P9,  PPLS, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_P7,   KC_P8,   KC_P9,   KC_PPLS, \
-        CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,          ENT,   P4,  P5,  P6,  PPLS, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
-        LSFT,NO, Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,      RSFT,UP,    P1,  P2,  P3,  PENT,\
+    KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,            KC_P1,   KC_P2,   KC_P3,   KC_PENT, \
-        LCTL,LGUI,LALT,               SPC,                RALT,FN0,      LEFT,DOWN,  RGHT,P0, PDOT, PENT),
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_FN0,  KC_LEFT, KC_DOWN, KC_RGHT,          KC_P0,   KC_PDOT, KC_PENT  \
  ),
-     LAYOUT(
+  [1] = LAYOUT(
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,\
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO,    TRNS,TRNS,TRNS,TRNS,\
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, \
-        TRNS,TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,     TRNS,  TRNS,TRNS,TRNS,TRNS,\
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, \
-        TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,          TRNS,  TRNS,TRNS,TRNS,TRNS,\
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______, \
-        TRNS,NO,  TRNS,TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, TRNS,     TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS,\
+    _______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, \
-        TRNS,TRNS,TRNS,               TRNS,               TRNS,TRNS,     TRNS,TRNS,  TRNS,TRNS,TRNS,TRNS)
+    _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______,          _______, _______, _______  \
  )
 };
 const uint16_t PROGMEM fn_actions[] = {
@@ -55,12 +55,12 @@ BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE ?= yes          # USB Nkey Rollover
-# BACKLIGHT_ENABLE ?= yes     # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = yes
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
@@ -5,11 +5,11 @@
  "width": 4,
  "height": 6,
  "layouts": {
-    "LAYOUT": {
+    "LAYOUT_numpad_6x4": {
      "key_count": 21,
-      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2, "h":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4, "h":2}, {"x":0, "y":5, "w":2}, {"x":2, "y":5}]
+      "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k23", "x":3, "y":2, "h":2}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k50", "x":0, "y":5, "w":2}, {"label":"k52", "x":2, "y":5}, {"label":"k43", "x":3, "y":4, "h":2}]
    },
-    "LAYOUT_all": {
+    "LAYOUT_ortho_6x4": {
      "key_count": 24,
      "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k23", "x":3, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k33", "x":3, "y":3}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k43", "x":3, "y":4}, {"label":"k50", "x":0, "y":5}, {"label":"k51", "x":1, "y":5}, {"label":"k52", "x":2, "y":5}, {"label":"k53", "x":3, "y":5}]
    }
@@ -0,0 +1 @@
 #include "at101_blackheart.h"
@@ -0,0 +1,28 @@
 #ifndef at101_blackheart_H
 #define at101_blackheart_H
 #include "quantum.h"
 #define LAYOUT( \
 	K0000, K0100, K0001, K0101, K0002, K0102, K0003, K0103, K0004, K0104, K0005, K0105, K0006, 			K0106, K0007, K0107, \
 	K0200, K0300, K0201, K0301, K0202, K0302, K0203, K0303, K0204, K0304, K0205, K0305, K0206, K0306, 	K0207, K0307, K0208, 	K0308, K0209, K0309, K0009, \
 	K0400, K0500, K0401, K0501, K0402, K0502, K0403, K0503, K0404, K0504, K0405, K0505, K0406, K0506, 	K0407, K0507, K0408, 	K0508, K0409, K0509, K0109, \
 	K0600, K0700, K0601, K0701, K0602, K0702, K0603, K0703, K0604, K0704, K0605, K0705, K0606,        							K0608, K0708, K0609, K0709, \
 	K0800, K1101, K0900, K0801, K0901, K0802, K0902, K0803, K0903, K0804, K0904, K0805, K0905, K0806, 		   K0807, 			K0808, K0908, K0809, K0909, \
 	K1000, K1100, K1001,  			   K1102,                     		  K1005, K1105, K1006, K1106, 	K1007, K1107, K1008, 		K1108, 	  K1009 \
 ) { \
 	{ K0000, K0001, K0002, K0003, K0004, K0005, K0006, K0007, KC_NO, K0009 }, \
 	{ K0100, K0101, K0102, K0103, K0104, K0105, K0106, K0107, KC_NO, K0109 }, \
 	{ K0200, K0201, K0202, K0203, K0204, K0205, K0206, K0207, K0208, K0209 }, \
 	{ K0300, K0301, K0302, K0303, K0304, K0305, K0306, K0307, K0308, K0309 }, \
 	{ K0400, K0401, K0402, K0403, K0404, K0405, K0406, K0407, K0408, K0409 }, \
 	{ K0500, K0501, K0502, K0503, K0504, K0505, K0506, K0507, K0508, K0509 }, \
 	{ K0600, K0601, K0602, K0603, K0604, K0605, K0606, KC_NO, K0608, K0609 }, \
 	{ K0700, K0701, K0702, K0703, K0704, K0705, KC_NO, KC_NO, K0708, K0709 }, \
 	{ K0800, K0801, K0802, K0803, K0804, K0805, K0806, K0807, K0808, K0809 }, \
 	{ K0900, K0901, K0902, K0903, K0904, K0905, KC_NO, KC_NO, K0908, K0909 }, \
 	{ K1000, K1001, KC_NO, KC_NO, KC_NO, K1005, K1006, K1007, K1008, K1009 }, \
 	{ K1100, K1101, K1102, KC_NO, KC_NO, K1105, K1106, K1107, K1108, KC_NO }  \
 }
 #endif
@@ -0,0 +1,43 @@
 #pragma once
 #include "config_common.h"
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    blindassassin111
 #define PRODUCT         AT101_Blackheart PCB
 #define DESCRIPTION     Replacement AT101 PCB
 /* key matrix size */
 #define MATRIX_ROWS 12
 #define MATRIX_COLS 10
 /* key matrix pins */
 #define MATRIX_ROW_PINS { F0, F1, F4, D4, F6, F5, F7, B6, B5, D5, C7, C6 }
 #define MATRIX_COL_PINS { D1, D0, B7, B3, B2, B1, B0, E6, D2, D3 }
 #define UNUSED_PINS
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCING_DELAY 5
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* force n-key rollover*/
 #define FORCE_NKRO
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* prevent stuck modifiers */
 #define PREVENT_STUCK_MODIFIERS
@@ -0,0 +1,53 @@
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	LAYOUT(
 		KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, 				KC_PSCR,KC_SLCK, KC_PAUS,
 		KC_GRV, KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,  KC_9,  KC_0,   KC_MINS,KC_EQL, KC_BSPC,		KC_INS, KC_HOME, KC_PGUP, 		KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
 		KC_TAB, KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,  KC_I,  KC_O,  KC_P,   KC_LBRC,KC_RBRC,KC_BSLS, 	KC_DEL, KC_END,  KC_PGDN, 		KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
 		KC_CAPS,KC_A,  KC_S,  KC_D,  KC_F,  KC_G,  KC_H,  KC_J,  KC_K, 	KC_L,  KC_SCLN,KC_QUOT,KC_ENT, 												KC_P4, 	 KC_P5,   KC_P6,   KC_PEQL,
 		KC_LSFT,KC_BSLS,KC_Z, KC_X,  KC_C,  KC_V,  KC_B,  KC_N,  KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_LSFT,MO(1), 				KC_UP, 					KC_P1,   KC_P2,   KC_P3,   KC_PENT,
 		KC_LCTL,KC_LGUI,KC_LALT, 			KC_SPC,				 		KC_RALT, KC_RGUI,KC_MENU, KC_RCTL,			KC_LEFT,KC_DOWN, KC_RGHT,			KC_P0,		  KC_PDOT),
 	LAYOUT(
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 			KC_TRNS, KC_TRNS, KC_TRNS, 			  
 		RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS, 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS, 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 					 						KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 			 KC_TRNS, 				KC_TRNS, KC_TRNS, KC_TRNS, 
 		KC_TRNS, KC_TRNS, KC_TRNS, 					 KC_TRNS, 							 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS,			KC_TRNS, 	  KC_TRNS),
 };
 void matrix_init_user(void) {
 }
 void matrix_scan_user(void) {
 }
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 	return true;
 }
 void led_set_user(uint8_t usb_led) {
  DDRB |= (1 << 4);
  DDRD |= (1 << 6) | (1 << 7);
  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
    PORTD |= (1 << 7);
  } else {
    PORTD &= ~(1 << 7);
  }
  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
    PORTB |= (1 << 4);
  } else {
    PORTB &= ~(1 << 4);
  }
  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
    PORTD |= (1 << 6);
  } else {
    PORTD &= ~(1 << 6);
  }
 }
@@ -0,0 +1,14 @@
 AT101 Blackheart PCB
 ===
 A replacement PCB for AT101 keyboards.
 Keyboard Maintainer: QMK Community and blindassassin111  
 Hardware Supported: AT101 blackheart PCB  
 Hardware Availability: https://deskthority.net/group-buys-f50/programmable-vintage-board-pcbs-omnikey-at101-and-z-150-t19325.html
 Make example for this keyboard (after setting up your build environment):
    make at101_blackheart:default
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
@@ -0,0 +1,59 @@
 # MCU name
 MCU = atmega32u4
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the
 #     processor frequency in Hz. You can then use this symbol in your source code to
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
 #     This will be an integer division of F_USB below, as it is sourced by
 #     F_USB after it has run through any CPU prescalers. Note that this value
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
 F_CPU = 16000000
 #
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
 ARCH = AVR8
 # Input clock frequency.
 #     This will define a symbol, F_USB, in all source code files equal to the
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
 #     at the end, this will be done automatically to create a 32-bit value in your
 #     source code.
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 # Bootloader selection
 BOOTLOADER = halfkay
 # Boot Section Size in *bytes*
 # OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
 BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
 CONSOLE_ENABLE = no	# Console for debug(+400)
 COMMAND_ENABLE = no    # Commands for debug and configuration
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = no
@@ -16,4 +16,6 @@ Make example for this keyboard (after setting up your build environment):
 Unlike the TMK firmware, this command should be run from the root of
 the repository, not the directory containing this readme.
 If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing *down* instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands.
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
@@ -5,6 +5,9 @@ ifdef TEENSY2
    ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
 else
    OPT_DEFS += -DATREUS_ASTAR
 ifdef PCBDOWN
    OPT_DEFS += -DPCBDOWN
 endif
    ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
                            avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
 endif
@@ -0,0 +1,44 @@
 # B.face
 A 60% keyboard with RGB that runs ps2avrgb natively. Please note that the B.face and B.fake have different switch matrices. Firmware on one, will not work on the other. 
 Keyboard Maintainer: QMK Community  
 Hardware Supported: B.face PCB   
 Hardware Availability: [Winkeyless](https://winkeyless.kr/product/b-face-x2-pcb/)   
 Make example for this keyboard (after setting up your build environment):
    make bface:default
 Flashing
 ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
 Windows: 
 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
 2. Place your keyboard into reset. 
 3. Press the `Find Device` button and ensure that your keyboard is found.
 4. Press the `Open .hex File` button and locate the `.hex` file you created.
 5. Press the `Flash Device` button and wait for the process to complete. 
 macOS:
 1. Install homebrew by typing the following:   
    ```
    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    ```
 2. Install `crosspack-avr`.  
    ```
    brew cask install crosspack-avr
    ```
 3. Install the following packages:
    ```
    brew install python
    brew install pyusb
    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    ```
 4. Place your keyboard into reset. 
 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
@@ -0,0 +1,94 @@
 /* Copyright 2017 Sebastian Kaim
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #ifdef BACKLIGHT_ENABLE
 #include "backlight_ps2avrGB.h"
 #define sbi(reg,bit)	reg |= (_BV(bit))
 #define cbi(reg,bit)	reg &= (~_BV(bit))
 #define PWM10	WGM10
 #define PWM11	WGM11
 #define COM1x1 COM1B1
 #define OCR1x  OCR1B
 void backlight_init_ports(void)
 {
 #if BACKLIGHT_ON_STATE == 0
 	backlight_off();
 #else
 	backlight_on();
 #endif
 	// setup pwm
 	// this bitmagic is sourced from the original firmware
 	/*TCCR1B = ((TCCR1B & ~0x07) | 0x03);
 	TCNT1H = 0;
 	TCNT1L = 0;
 	sbi(TIMSK, TOIE1);
 	OCR1BH = 0;
 	OCR1BL = 0;
 	cbi(TCCR1A,PWM11);
 	sbi(TCCR1A,PWM10);
 	sbi(TCCR1A,COM1B1);
 	cbi(TCCR1A,COM1B0);*/
 	ICR1 = 0xFFFF;
    TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
 	backlight_init();
 }
 void backlight_set(uint8_t level)
 {
 	if( level == 0 ) {
 		backlight_off();
 	}
 	else {
 		backlight_on();
 		/*uint8_t pwm = get_pwm_for_brightness(level);
 		set_backlight_pwm(pwm);
 		TCCR1A |= _BV(COM1x1);
 		OCR1x = (level >= 2) ? 0xFFFF : 0x00FF;*/
 	}
 }
 #define PWM_MAX 0xFF
 uint8_t get_pwm_for_brightness(uint8_t level)
 {
 	// we need to cast up here to allow multiplication with 0xFF. We could also use floats, but this is probably a lot faster.
 	uint16_t brightness = (uint16_t)level * (uint16_t)PWM_MAX / (uint16_t)BACKLIGHT_LEVELS;
 	return (uint8_t)brightness;
 }
 void backlight_on(void)
 {
 	//_SFR_IO8(0x12) |= _BV(0x4);
 	LED_PIN |= BACKLIGHT_PORT_NUM;
 }
 void backlight_off(void)
 {
 	//_SFR_IO8(0x12) &= ~_BV(0x4);
 	LED_PIN &= ~BACKLIGHT_PORT_NUM;
 }
 void set_backlight_pwm(uint8_t level) {
 	// this does not work (yet)
 	//OCR1B = level;
 }
 #endif // BACKLIGHT_ENABLE
@@ -0,0 +1,35 @@
 /* Copyright 2017 Sebastian Kaim
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #if defined(__AVR__)
 #include <avr/pgmspace.h>
 #include <avr/io.h>
 #include <avr/interrupt.h>
 #endif
 #include <stddef.h>
 #include <stdlib.h>
 #include "backlight.h"
 #ifndef PS2AVRGB_BACKLIGHT_H
 #define PS2AVRGB_BACKLIGHT_H
 uint8_t get_pwm_for_brightness(uint8_t level);
 void set_backlight_pwm(uint8_t level);
 void backlight_on(void);
 void backlight_off(void);
 #endif
@@ -0,0 +1,46 @@
 /*
 Copyright 2017 Luiz Ribeiro <[email protected]>
 Copyright 2018 Sebastian Kaim <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "bface.h"
 #include "rgblight.h"
 #include <avr/pgmspace.h>
 #include "action_layer.h"
 #include "i2c.h"
 #include "quantum.h"
 extern rgblight_config_t rgblight_config;
 void rgblight_set(void) {
    if (!rgblight_config.enable) {
        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
            led[i].r = 0;
            led[i].g = 0;
            led[i].b = 0;
        }
    }
    i2c_init();
    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
 }
 __attribute__ ((weak))
 void matrix_scan_user(void) {
    rgblight_task();
 }
@@ -0,0 +1,44 @@
 /*
 Copyright 2017 Luiz Ribeiro <[email protected]>
 Copyright 2017 Sebastian Kaim <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #ifndef KEYMAP_COMMON_H
 #define KEYMAP_COMMON_H
 #include "quantum_keycodes.h"
 #include "keycode.h"
 #include "action.h"
 #define LAYOUT_60_ansi( \
  K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, \
  K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, \
  K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2,      KD2, \
  K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, \
  K00, K10, K20,           K56,                K57, KA0, KB0, KC0  \
 ){ \
  { K00,   K10,   K20,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KA0,   KB0,   KC0,   KC_NO, KC_NO }, \
  { K01,   K11,   K21,   K31,   K41,   K51,   KC_NO, KC_NO, KC_NO, KC_NO, KA1,   KB1,   KC_NO, KC_NO, KC_NO }, \
  { K02,   K12,   K22,   K32,   K42,   K52,   KC_NO, KC_NO, KC_NO, KC_NO, KA2,   KB2,   KC_NO, KD2,   KC_NO }, \
  { K03,   K13,   K23,   K33,   K43,   K53,   KC_NO, KC_NO, KC_NO, KC_NO, KA3,   KB3,   KC3,   KD3,   KC_NO }, \
  { K04,   K14,   K24,   K34,   K44,   K54,   KC_NO, KC_NO, KC_NO, KC_NO, KA4,   KB4,   KC4,   KC_NO, KE4   }, \
  { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
  { KC_NO, K16,   K26,   K36,   K46,   K56,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB6,   KC6,   KD6,   KE6   }, \
  { KC_NO, K17,   K27,   K37,   K47,   K57,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7,   KC7,   KD7,   KE7   } \
 }
 #endif
@@ -0,0 +1,49 @@
 /*
 Copyright 2017 Luiz Ribeiro <[email protected]>
 Copyright 2017 Sebastian Kaim <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #ifndef CONFIG_H
 #define CONFIG_H
 #define VENDOR_ID       0x20A0
 #define PRODUCT_ID      0x422D
 // You can edit those at usbconfig.h about line 250. These values will 
 // unforunatly be ignored so far
 #define MANUFACTURER    winkeyless.kr
 #define PRODUCT         b.face
 /* matrix size */
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 15
 #define RGBLED_NUM 16
 #define RGBLIGHT_ANIMATIONS
 #define NO_UART 1
 #define BOOTLOADHID_BOOTLOADER 1
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 #ifdef BACKLIGHT_ENABLE
 	// the backlight PWM does not work (yet). Therefore, we only have two backlight levels (on/off)
 	#define BACKLIGHT_LEVELS 1
 	#define LED_PIN PORTD
 	#define BACKLIGHT_PORT_NUM (1 << 4)
 #endif
 #endif
@@ -0,0 +1,104 @@
 /*
 Copyright 2016 Luiz Ribeiro <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include <avr/io.h>
 #include <util/twi.h>
 #include "i2c.h"
 void i2c_set_bitrate(uint16_t bitrate_khz) {
    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
    if (bitrate_div >= 16) {
        bitrate_div = (bitrate_div - 16) / 2;
    }
    TWBR = bitrate_div;
 }
 void i2c_init(void) {
    // set pull-up resistors on I2C bus pins
    PORTC |= 0b11;
    i2c_set_bitrate(400);
    // enable TWI (two-wire interface)
    TWCR |= (1 << TWEN);
    // enable TWI interrupt and slave address ACK
    TWCR |= (1 << TWIE);
    TWCR |= (1 << TWEA);
 }
 uint8_t i2c_start(uint8_t address) {
    // reset TWI control register
    TWCR = 0;
    // begin transmission and wait for it to end
    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
    while (!(TWCR & (1<<TWINT)));
    // check if the start condition was successfully transmitted
    if ((TWSR & 0xF8) != TW_START) {
        return 1;
    }
    // transmit address and wait
    TWDR = address;
    TWCR = (1<<TWINT) | (1<<TWEN);
    while (!(TWCR & (1<<TWINT)));
    // check if the device has acknowledged the READ / WRITE mode
    uint8_t twst = TW_STATUS & 0xF8;
    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
        return 1;
    }
    return 0;
 }
 void i2c_stop(void) {
    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
 }
 uint8_t i2c_write(uint8_t data) {
    TWDR = data;
    // transmit data and wait
    TWCR = (1<<TWINT) | (1<<TWEN);
    while (!(TWCR & (1<<TWINT)));
    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
        return 1;
    }
    return 0;
 }
 uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
    if (i2c_start(address)) {
        return 1;
    }
    for (uint16_t i = 0; i < length; i++) {
        if (i2c_write(data[i])) {
            return 1;
        }
    }
    i2c_stop();
    return 0;
 }
@@ -0,0 +1,25 @@
 /*
 Copyright 2016 Luiz Ribeiro <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #ifndef __I2C_H__
 #define __I2C_H__
 void i2c_init(void);
 void i2c_set_bitrate(uint16_t bitrate_khz);
 uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
 #endif
@@ -0,0 +1,12 @@
 {
  "keyboard_name": "b.face",
  "url": "",
  "maintainer": "qmk",
  "width": 15,
  "height": 5,
  "layouts": {
      "LAYOUT_60_ansi": {
          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
      }
  }
 }
@@ -0,0 +1,47 @@
 /*
 Copyright 2017 Sebastian Kaim <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    [0] = LAYOUT_60_ansi(
        KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,
        KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,
        KC_F1,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_ENT,
        KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,        KC_RSFT,
        KC_LCTL,KC_LALT,KC_LGUI,                KC_SPC,                         KC_RALT,KC_RGUI,MO(1), KC_RCTL
    ),
    [1] = LAYOUT_60_ansi(
        KC_TRNS,KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_TRNS,
        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,BL_INC, BL_DEC, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
        KC_TRNS,KC_TRNS,RGB_SMOD,KC_TRNS,BL_ON, BL_OFF, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,
        KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
    ),
    /* You can copy this layer as base for a new fn layer * /
 	[n] = LAYOUT_60_ansi(
        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_TRNS,
        KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
    ), // */
 };
 const uint16_t PROGMEM fn_actions[] = {
 	[0]  = ACTION_LAYER_MOMENTARY(1),
 };
@@ -0,0 +1,79 @@
 /*
 Copyright 2017 Kyle Peatt <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 #define ______ KC_TRNS
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    /* Qwerty
    * ,-----------------------------------------------------------------------------------------.
    * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
    * |-----------------------------------------------------------------------------------------+
    * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
    * |-----------------------------------------------------------------------------------------+
    * | Caps/FN |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
    * |-----------------------------------------------------------------------------------------+
    * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |     RShift      |
    * |-----------------------------------------------------------------------------------------+
    * | Ctrl |  GUI  |  Alt  |              Space                |  Alt  |  GUI  |  Ctrl |  Fn  |
    * `-----------------------------------------------------------------------------------------'
    */
    [0] = LAYOUT_60_ansi(
        KC_GESC, KC_1,  KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL, KC_BSPC,
        KC_TAB,  KC_Q,  KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC,KC_BSLS,
        LT(1, KC_CAPS), KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,   KC_SCLN, KC_QUOT, KC_ENT,
        KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
        KC_LCTL,KC_LGUI,KC_LALT,                KC_SPC,                          KC_RALT,KC_RGUI, KC_RCTL, MO(1)
    ),
    /* FN Layer
    * ,-----------------------------------------------------------------------------------------.
    * |  `~ | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10  | F11  | F12  |        |
    * |-----------------------------------------------------------------------------------------+
    * |        |     |  Up |     |     |     |     |     |     |     |RGBMOD| Val+| Val- |RBGTOG|
    * |-----------------------------------------------------------------------------------------+
    * |         | Left| Down|Right|     |     |     |     | Sat+| Sat-| Hue+| Hue-|             |
    * |-----------------------------------------------------------------------------------------+
    * |           |     |     |     |     |     |     |     |     |     |     |     |     |     |
    * |-----------------------------------------------------------------------------------------+
    * |      |       |       |                                   |     |      |     |     |     |
    * `-----------------------------------------------------------------------------------------'
    */
    [1] = LAYOUT_60_ansi(
        KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, ______,
        ______,______,KC_UP,______,______,______,______,______,______,______,RGB_MOD,RGB_VAI,RGB_VAD,RGB_TOG,
        ______,KC_LEFT,KC_DOWN,KC_RGHT,______, ______, ______,______,RGB_SAI,RGB_SAD,RGB_HUI,RGB_HUD,______,
        ______,______,______,______,______, ______, ______,______,______,______,______,        ______,
        ______,______,______,                ______,                        ______,______,______,______
    ),
    /* You can copy this layer as base for a new fn layer * /
 	[n] = LAYOUT_60_ansi(
        ______,______,______,______,______,______,______,______,______,______,______,______,______,______,
        ______,______,______,______,______,______,______,______,______,______,______,______,______,______,
        ______,______,______,______,______,______,______,______,______,______,______,______,______,
        ______,______,______,______,______,______,______,______,______,______,______,        ______,
        ______,______,______,                ______,                        ______,______,______,______
    ), // */
 };
 const uint16_t PROGMEM fn_actions[] = {
 	[0]  = ACTION_LAYER_MOMENTARY(1),
 };
@@ -0,0 +1,10 @@
 kpeatt's bface layout
 ======================
 ## Keyboard Notes
 - This is for a clone bface PCB that is no longer for sale as far as I can tell. [Used to be sold on KBDFans](https://www.aliexpress.com/item/bface-60-RGB-underground-copy-pcb-from-china-gh60-pcb-Customize-keyboard-PCB/32731084597.html).
 - To put in reset mode hold `left ctrl` while inserting the USB cable
 - Use flashing instructions in the main `bface` directory
 ### Build
 To build this keymap, run `make bface:kpeatt` from the qmk_firmware directory.
@@ -0,0 +1,113 @@
 /*
 Copyright 2017 Luiz Ribeiro <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include <avr/io.h>
 #include <util/delay.h>
 #include "matrix.h"
 #ifndef DEBOUNCE
 #   define DEBOUNCE	5
 #endif
 static uint8_t debouncing = DEBOUNCE;
 static matrix_row_t matrix[MATRIX_ROWS];
 static matrix_row_t matrix_debouncing[MATRIX_ROWS];
 void matrix_init(void) {
    // all outputs for rows high
    DDRB = 0xFF;
    PORTB = 0xFF;
    // all inputs for columns
    DDRA = 0x00;
    DDRC &= ~(0x111111<<2);
    DDRD &= ~(1<<PIND7);
    // all columns are pulled-up
    PORTA = 0xFF;
    PORTC |= (0b111111<<2);
    PORTD |= (1<<PIND7);
    // initialize matrix state: all keys off
    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
        matrix[row] = 0x00;
        matrix_debouncing[row] = 0x00;
    }
 	// activate backlight
 	//PORTD |= (1 << 4);
 	//_SFR_IO8(0x09) |= (1 << 4); //_BV(0x94 & 0xF);
 	//
 	// this is the code that *should* be executed in quantum.c
 	_SFR_IO8(0x12) |= _BV(0x4);
 }
 void matrix_set_row_status(uint8_t row) {
    DDRB = (1 << row);
    PORTB = ~(1 << row);
 }
 uint8_t bit_reverse(uint8_t x) {
    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
    return x;
 }
 uint8_t matrix_scan(void) {
    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
        matrix_set_row_status(row);
        _delay_us(5);
        matrix_row_t cols = (
            // cols 0..7, PORTA 0 -> 7
            (~PINA) & 0xFF
        ) | (
            // cols 8..13, PORTC 7 -> 0
            bit_reverse((~PINC) & 0xFF) << 8
        ) | (
            // col 14, PORTD 7
            ((~PIND) & (1 << PIND7)) << 7
        );
        if (matrix_debouncing[row] != cols) {
            matrix_debouncing[row] = cols;
            debouncing = DEBOUNCE;
        }
    }
    if (debouncing) {
        if (--debouncing) {
            _delay_ms(1);
        } else {
            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
                matrix[i] = matrix_debouncing[i];
            }
        }
    }
    matrix_scan_user();
    return 1;
 }
 inline matrix_row_t matrix_get_row(uint8_t row) {
    return matrix[row];
 }
 void matrix_print(void) {
 }
@@ -0,0 +1,105 @@
 #!/usr/bin/env python
 # Copyright 2017 Luiz Ribeiro <[email protected]>, Sebastian Kaim <[email protected]>
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation, either version 2 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 from __future__ import print_function
 import os
 import sys
 import time
 import usb
 def checkForKeyboardInNormalMode():
    """Returns a device if a ps2avrGB device in normal made (that is in keyboard mode) or None if it is not found."""
    return usb.core.find(idVendor=0x20A0, idProduct=0x422D)
 def checkForKeyboardInBootloaderMode():
    """Returns True if a ps2avrGB device in bootloader (flashable) mode is found and False otherwise."""
    return (usb.core.find(idVendor=0x16c0, idProduct=0x05df) is not None)
 def flashKeyboard(firmware_file):
    """Calls bootloadHID to flash the given file to the device."""
    print('Flashing firmware to device ...')
    if os.system('bootloadHID -r "%s"' % firmware_file) == 0:
        print('\nDone!')
    else:
        print('\nbootloadHID returned an error.')
 def printDeviceInfo(dev):
    """Prints all infos for a given USB device"""
    print('Device Information:')
    print('  idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
    print('  idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
    print('Manufacturer: %s' % (dev.iManufacturer))
    print('Serial: %s' % (dev.iSerialNumber))
    print('Product: %s' % (dev.iProduct), end='\n\n')
 def sendDeviceToBootloaderMode(dev):
    """Tries to send a given ps2avrGB keyboard to bootloader mode to allow flashing."""
    try:
        dev.set_configuration()
        request_type = usb.util.build_request_type(
                usb.util.CTRL_OUT,
                usb.util.CTRL_TYPE_CLASS,
                usb.util.CTRL_RECIPIENT_DEVICE)
        USBRQ_HID_SET_REPORT = 0x09
        HID_REPORT_OPTION = 0x0301
        dev.ctrl_transfer(request_type, USBRQ_HID_SET_REPORT, HID_REPORT_OPTION, 0, [0, 0, 0xFF] + [0] * 5)
    except usb.core.USBError:
        # for some reason I keep getting USBError, but it works!
        pass
 if len(sys.argv) < 2:
    print('Usage: %s <firmware.hex>' % sys.argv[0])
    sys.exit(1)
 kb = checkForKeyboardInNormalMode()
 if kb is not None:
    print('Found a keyboad in normal mode. Attempting to send it to bootloader mode ...', end='')
    sendDeviceToBootloaderMode(kb)
    print(' done.')
    print("Hint: If your keyboard can't be set to bootloader mode automatically, plug it in while pressing the bootloader key to do so manually.")
    print("      You can find more infos about this here: https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB#setting-the-board-to-bootloader-mode")
 attempts = 12  # 60 seconds
 found = False
 for attempt in range(1, attempts + 1):
    print("Searching for keyboard in bootloader mode (%i/%i) ... " % (attempt, attempts), end='')
    if checkForKeyboardInBootloaderMode():
        print('Found', end='\n\n')
        flashKeyboard(sys.argv[1])
        found = True
        break
    else:
        print('Nothing.', end='')
        if attempt != attempts:  # no need to wait on the last attempt
            print(' Sleeping 5 seconds.', end='')
            time.sleep(5)
        # print a newline
        print()
 if not found:
    print("Couldn't find a flashable keyboard. Aborting.")
    sys.exit(2)
@@ -0,0 +1,49 @@
 # Copyright 2017 Luiz Ribeiro <[email protected]>
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation, either version 2 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 # MCU name
 MCU = atmega32a
 PROTOCOL = VUSB
 # unsupported features for now
 NO_UART = yes
 NO_SUSPEND_POWER_DOWN = yes
 # processor frequency
 F_CPU = 12000000
 # build options
 BOOTMAGIC_ENABLE = yes
 MOUSEKEY_ENABLE = yes
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 BACKLIGHT_CUSTOM_DRIVER = yes
 BACKLIGHT_BREATHING = no
 RGBLIGHT_ENABLE = yes
 RGBLIGHT_CUSTOM_DRIVER = yes
 OPT_DEFS = -DDEBUG_LEVEL=0
 OPT_DEFS += -DBOOTLOADER_SIZE=2048
 # custom matrix setup
 CUSTOM_MATRIX = yes
 SRC = matrix.c i2c.c backlight_ps2avrGB.c
 # programming options
 PROGRAM_CMD = ./keyboards/bface/program .build/$(TARGET).hex
 LAYOUTS = 60_ansi
@@ -0,0 +1,396 @@
 /* Name: usbconfig.h
 * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
 * Author: Christian Starkjohann
 * Creation Date: 2005-04-01
 * Tabsize: 4
 * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
 * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
 * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
 */
 #ifndef __usbconfig_h_included__
 #define __usbconfig_h_included__
 #include "config.h"
 /*
 General Description:
 This file is an example configuration (with inline documentation) for the USB
 driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
 also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
 wire the lines to any other port, as long as D+ is also wired to INT0 (or any
 other hardware interrupt, as long as it is the highest level interrupt, see
 section at the end of this file).
 */
 /* ---------------------------- Hardware Config ---------------------------- */
 #define USB_CFG_IOPORTNAME      D
 /* This is the port where the USB bus is connected. When you configure it to
 * "B", the registers PORTB, PINB and DDRB will be used.
 */
 #define USB_CFG_DMINUS_BIT      3
 /* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
 * This may be any bit in the port.
 */
 #define USB_CFG_DPLUS_BIT       2
 /* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
 * This may be any bit in the port. Please note that D+ must also be connected
 * to interrupt pin INT0! [You can also use other interrupts, see section
 * "Optional MCU Description" below, or you can connect D- to the interrupt, as
 * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
 * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
 * markers every millisecond.]
 */
 #define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
 /* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
 * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
 * require no crystal, they tolerate +/- 1% deviation from the nominal
 * frequency. All other rates require a precision of 2000 ppm and thus a
 * crystal!
 * Since F_CPU should be defined to your actual clock rate anyway, you should
 * not need to modify this setting.
 */
 #define USB_CFG_CHECK_CRC       0
 /* Define this to 1 if you want that the driver checks integrity of incoming
 * data packets (CRC checks). CRC checks cost quite a bit of code size and are
 * currently only available for 18 MHz crystal clock. You must choose
 * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
 */
 /* ----------------------- Optional Hardware Config ------------------------ */
 /* #define USB_CFG_PULLUP_IOPORTNAME   D */
 /* If you connect the 1.5k pullup resistor from D- to a port pin instead of
 * V+, you can connect and disconnect the device from firmware by calling
 * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
 * This constant defines the port on which the pullup resistor is connected.
 */
 /* #define USB_CFG_PULLUP_BIT          4 */
 /* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
 * above) where the 1.5k pullup resistor is connected. See description
 * above for details.
 */
 /* --------------------------- Functional Range ---------------------------- */
 #define USB_CFG_HAVE_INTRIN_ENDPOINT    1
 /* Define this to 1 if you want to compile a version with two endpoints: The
 * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
 * number).
 */
 #define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
 /* Define this to 1 if you want to compile a version with three endpoints: The
 * default control endpoint 0, an interrupt-in endpoint 3 (or the number
 * configured below) and a catch-all default interrupt-in endpoint as above.
 * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
 */
 #define USB_CFG_EP3_NUMBER              3
 /* If the so-called endpoint 3 is used, it can now be configured to any other
 * endpoint number (except 0) with this macro. Default if undefined is 3.
 */
 /* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
 /* The above macro defines the startup condition for data toggling on the
 * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
 * Since the token is toggled BEFORE sending any data, the first packet is
 * sent with the oposite value of this configuration!
 */
 #define USB_CFG_IMPLEMENT_HALT          0
 /* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
 * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
 * it is required by the standard. We have made it a config option because it
 * bloats the code considerably.
 */
 #define USB_CFG_SUPPRESS_INTR_CODE      0
 /* Define this to 1 if you want to declare interrupt-in endpoints, but don't
 * want to send any data over them. If this macro is defined to 1, functions
 * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
 * you need the interrupt-in endpoints in order to comply to an interface
 * (e.g. HID), but never want to send any data. This option saves a couple
 * of bytes in flash memory and the transmit buffers in RAM.
 */
 #define USB_CFG_INTR_POLL_INTERVAL      1
 /* If you compile a version with endpoint 1 (interrupt-in), this is the poll
 * interval. The value is in milliseconds and must not be less than 10 ms for
 * low speed devices.
 */
 #define USB_CFG_IS_SELF_POWERED         0
 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
 * device is powered from the USB bus.
 */
 #define USB_CFG_MAX_BUS_POWER           500
 /* Set this variable to the maximum USB bus power consumption of your device.
 * The value is in milliamperes. [It will be divided by two since USB
 * communicates power requirements in units of 2 mA.]
 */
 #define USB_CFG_IMPLEMENT_FN_WRITE      1
 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
 * transfers. Set it to 0 if you don't need it and want to save a couple of
 * bytes.
 */
 #define USB_CFG_IMPLEMENT_FN_READ       0
 /* Set this to 1 if you need to send control replies which are generated
 * "on the fly" when usbFunctionRead() is called. If you only want to send
 * data from a static buffer, set it to 0 and return the data from
 * usbFunctionSetup(). This saves a couple of bytes.
 */
 #define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
 /* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
 * You must implement the function usbFunctionWriteOut() which receives all
 * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
 * can be found in 'usbRxToken'.
 */
 #define USB_CFG_HAVE_FLOWCONTROL        0
 /* Define this to 1 if you want flowcontrol over USB data. See the definition
 * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
 * usbdrv.h.
 */
 #define USB_CFG_DRIVER_FLASH_PAGE       0
 /* If the device has more than 64 kBytes of flash, define this to the 64 k page
 * where the driver's constants (descriptors) are located. Or in other words:
 * Define this to 1 for boot loaders on the ATMega128.
 */
 #define USB_CFG_LONG_TRANSFERS          0
 /* Define this to 1 if you want to send/receive blocks of more than 254 bytes
 * in a single control-in or control-out transfer. Note that the capability
 * for long transfers increases the driver size.
 */
 /* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
 /* This macro is a hook if you want to do unconventional things. If it is
 * defined, it's inserted at the beginning of received message processing.
 * If you eat the received message and don't want default processing to
 * proceed, do a return after doing your things. One possible application
 * (besides debugging) is to flash a status LED on each packet.
 */
 /* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
 /* This macro is a hook if you need to know when an USB RESET occurs. It has
 * one parameter which distinguishes between the start of RESET state and its
 * end.
 */
 /* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
 /* This macro (if defined) is executed when a USB SET_ADDRESS request was
 * received.
 */
 #define USB_COUNT_SOF                   1
 /* define this macro to 1 if you need the global variable "usbSofCount" which
 * counts SOF packets. This feature requires that the hardware interrupt is
 * connected to D- instead of D+.
 */
 /* #ifdef __ASSEMBLER__
 * macro myAssemblerMacro
 *     in      YL, TCNT0
 *     sts     timer0Snapshot, YL
 *     endm
 * #endif
 * #define USB_SOF_HOOK                    myAssemblerMacro
 * This macro (if defined) is executed in the assembler module when a
 * Start Of Frame condition is detected. It is recommended to define it to
 * the name of an assembler macro which is defined here as well so that more
 * than one assembler instruction can be used. The macro may use the register
 * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
 * immediately after an SOF pulse may be lost and must be retried by the host.
 * What can you do with this hook? Since the SOF signal occurs exactly every
 * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
 * designs running on the internal RC oscillator.
 * Please note that Start Of Frame detection works only if D- is wired to the
 * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
 */
 #define USB_CFG_CHECK_DATA_TOGGLING     0
 /* define this macro to 1 if you want to filter out duplicate data packets
 * sent by the host. Duplicates occur only as a consequence of communication
 * errors, when the host does not receive an ACK. Please note that you need to
 * implement the filtering yourself in usbFunctionWriteOut() and
 * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
 * for each control- and out-endpoint to check for duplicate packets.
 */
 #define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
 /* define this macro to 1 if you want the function usbMeasureFrameLength()
 * compiled in. This function can be used to calibrate the AVR's RC oscillator.
 */
 #define USB_USE_FAST_CRC                0
 /* The assembler module has two implementations for the CRC algorithm. One is
 * faster, the other is smaller. This CRC routine is only used for transmitted
 * messages where timing is not critical. The faster routine needs 31 cycles
 * per byte while the smaller one needs 61 to 69 cycles. The faster routine
 * may be worth the 32 bytes bigger code size if you transmit lots of data and
 * run the AVR close to its limit.
 */
 /* -------------------------- Device Description --------------------------- */
 #define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
 /* USB vendor ID for the device, low byte first. If you have registered your
 * own Vendor ID, define it here. Otherwise you may use one of obdev's free
 * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
 * *** IMPORTANT NOTE ***
 * This template uses obdev's shared VID/PID pair for Vendor Class devices
 * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
 * the implications!
 */
 #define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
 /* This is the ID of the product, low byte first. It is interpreted in the
 * scope of the vendor ID. If you have registered your own VID with usb.org
 * or if you have licensed a PID from somebody else, define it here. Otherwise
 * you may use one of obdev's free shared VID/PID pairs. See the file
 * USB-IDs-for-free.txt for details!
 * *** IMPORTANT NOTE ***
 * This template uses obdev's shared VID/PID pair for Vendor Class devices
 * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
 * the implications!
 */
 #define USB_CFG_DEVICE_VERSION  0x00, 0x02
 /* Version number of the device: Minor number first, then major number.
 */
 #define USB_CFG_VENDOR_NAME     'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
 #define USB_CFG_VENDOR_NAME_LEN 13
 /* These two values define the vendor name returned by the USB device. The name
 * must be given as a list of characters under single quotes. The characters
 * are interpreted as Unicode (UTF-16) entities.
 * If you don't want a vendor name string, undefine these macros.
 * ALWAYS define a vendor name containing your Internet domain name if you use
 * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
 * details.
 */
 #define USB_CFG_DEVICE_NAME     'b', '.', 'f', 'a', 'c', 'e'
 #define USB_CFG_DEVICE_NAME_LEN 6
 /* Same as above for the device name. If you don't want a device name, undefine
 * the macros. See the file USB-IDs-for-free.txt before you assign a name if
 * you use a shared VID/PID.
 */
 /*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
 /*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
 /* Same as above for the serial number. If you don't want a serial number,
 * undefine the macros.
 * It may be useful to provide the serial number through other means than at
 * compile time. See the section about descriptor properties below for how
 * to fine tune control over USB descriptors such as the string descriptor
 * for the serial number.
 */
 #define USB_CFG_DEVICE_CLASS        0
 #define USB_CFG_DEVICE_SUBCLASS     0
 /* See USB specification if you want to conform to an existing device class.
 * Class 0xff is "vendor specific".
 */
 #define USB_CFG_INTERFACE_CLASS     3   /* HID */
 #define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
 #define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
 /* See USB specification if you want to conform to an existing device class or
 * protocol. The following classes must be set at interface level:
 * HID class is 3, no subclass and protocol required (but may be useful!)
 * CDC class is 2, use subclass 2 and protocol 1 for ACM
 */
 #define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
 /* Define this to the length of the HID report descriptor, if you implement
 * an HID device. Otherwise don't define it or define it to 0.
 * If you use this define, you must add a PROGMEM character array named
 * "usbHidReportDescriptor" to your code which contains the report descriptor.
 * Don't forget to keep the array and this define in sync!
 */
 /* #define USB_PUBLIC static */
 /* Use the define above if you #include usbdrv.c instead of linking against it.
 * This technique saves a couple of bytes in flash memory.
 */
 /* ------------------- Fine Control over USB Descriptors ------------------- */
 /* If you don't want to use the driver's default USB descriptors, you can
 * provide our own. These can be provided as (1) fixed length static data in
 * flash memory, (2) fixed length static data in RAM or (3) dynamically at
 * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
 * information about this function.
 * Descriptor handling is configured through the descriptor's properties. If
 * no properties are defined or if they are 0, the default descriptor is used.
 * Possible properties are:
 *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
 *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
 *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
 *     you want RAM pointers.
 *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
 *     in static memory is in RAM, not in flash memory.
 *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
 *     the driver must know the descriptor's length. The descriptor itself is
 *     found at the address of a well known identifier (see below).
 * List of static descriptor names (must be declared PROGMEM if in flash):
 *   char usbDescriptorDevice[];
 *   char usbDescriptorConfiguration[];
 *   char usbDescriptorHidReport[];
 *   char usbDescriptorString0[];
 *   int usbDescriptorStringVendor[];
 *   int usbDescriptorStringDevice[];
 *   int usbDescriptorStringSerialNumber[];
 * Other descriptors can't be provided statically, they must be provided
 * dynamically at runtime.
 *
 * Descriptor properties are or-ed or added together, e.g.:
 * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
 *
 * The following descriptors are defined:
 *   USB_CFG_DESCR_PROPS_DEVICE
 *   USB_CFG_DESCR_PROPS_CONFIGURATION
 *   USB_CFG_DESCR_PROPS_STRINGS
 *   USB_CFG_DESCR_PROPS_STRING_0
 *   USB_CFG_DESCR_PROPS_STRING_VENDOR
 *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
 *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
 *   USB_CFG_DESCR_PROPS_HID
 *   USB_CFG_DESCR_PROPS_HID_REPORT
 *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
 *
 * Note about string descriptors: String descriptors are not just strings, they
 * are Unicode strings prefixed with a 2 byte header. Example:
 * int  serialNumberDescriptor[] = {
 *     USB_STRING_DESCRIPTOR_HEADER(6),
 *     'S', 'e', 'r', 'i', 'a', 'l'
 * };
 */
 #define USB_CFG_DESCR_PROPS_DEVICE                  0
 #define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
 //#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
 #define USB_CFG_DESCR_PROPS_STRINGS                 0
 #define USB_CFG_DESCR_PROPS_STRING_0                0
 #define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
 #define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
 #define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
 #define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
 //#define USB_CFG_DESCR_PROPS_HID                     0
 #define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
 //#define USB_CFG_DESCR_PROPS_HID_REPORT              0
 #define USB_CFG_DESCR_PROPS_UNKNOWN                 0
 #define usbMsgPtr_t unsigned short
 /* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
 * a scalar type here because gcc generates slightly shorter code for scalar
 * arithmetics than for pointer arithmetics. Remove this define for backward
 * type compatibility or define it to an 8 bit type if you use data in RAM only
 * and all RAM is below 256 bytes (tiny memory model in IAR CC).
 */
 /* ----------------------- Optional MCU Description ------------------------ */
 /* The following configurations have working defaults in usbdrv.h. You
 * usually don't need to set them explicitly. Only if you want to run
 * the driver on a device which is not yet supported or with a compiler
 * which is not fully supported (such as IAR C) or if you use a differnt
 * interrupt than INT0, you may have to define some of these.
 */
 /* #define USB_INTR_CFG            MCUCR */
 /* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
 /* #define USB_INTR_CFG_CLR        0 */
 /* #define USB_INTR_ENABLE         GIMSK */
 /* #define USB_INTR_ENABLE_BIT     INT0 */
 /* #define USB_INTR_PENDING        GIFR */
 /* #define USB_INTR_PENDING_BIT    INTF0 */
 /* #define USB_INTR_VECTOR         INT0_vect */
 /* Set INT1 for D- falling edge to count SOF */
 /* #define USB_INTR_CFG            EICRA */
 #define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
 /* #define USB_INTR_CFG_CLR        0 */
 /* #define USB_INTR_ENABLE         EIMSK */
 #define USB_INTR_ENABLE_BIT     INT1
 /* #define USB_INTR_PENDING        EIFR */
 #define USB_INTR_PENDING_BIT    INTF1
 #define USB_INTR_VECTOR         INT1_vect
 #endif /* __usbconfig_h_included__ */
@@ -14,7 +14,7 @@ GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
-#include "bigseries.h"
+#include "1key.h"
 void matrix_scan_kb(void) {
  // Looping keyboard code goes here
@@ -54,6 +54,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 5
 #ifdef RGBLIGHT_LIMIT_VAL
 #undef RGBLIGHT_LIMIT_VAL
 #endif
 #define RGBLIGHT_LIMIT_VAL 128
 #endif
 #endif
@@ -0,0 +1,91 @@
 /*
 Copyright 2018 Cole Markham
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 LAYOUT(
    LCTL(LALT(KC_DEL))
    ),
 };
 bool initialized = 0;
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
  return MACRO_NONE ;
 }
 void matrix_init_user(void) {
  if (!initialized){
      dprintf("Initializing in matrix_scan_user");
      // Disable to set a known state
      rgblight_disable();
      rgblight_init();
      // None of the subsequent operations take effect if not enabled
      rgblight_enable();
      rgblight_sethsv(0,0,255);
      rgblight_mode(7);
      initialized = 1;
    }
 }
 void matrix_scan_user(void) {
 }
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
  }
  return true;
 }
 void led_set_user(uint8_t usb_led) {
  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
  } else {
  }
  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
  } else {
  }
  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
  } else {
  }
  if (usb_led & (1 << USB_LED_COMPOSE)) {
  } else {
  }
  if (usb_led & (1 << USB_LED_KANA)) {
  } else {
  }
 }