DC01 keyboard addition (#3428)

* DC01 initial commit

- Addition of directories
- Left readme

* Initial commit of left half

* Initial files for right half

* arrow

* i2c adjustments

* I2C slave and DC01 refractoring

- Cleaned up state machine of I2C slave driver
- Modified DC01 left to use already pressent I2C master driver
- Modified DC01 matrixes

* Fixed tabs to spaces

* Addition of Numpad

* Add keymaps

- Orthopad keymap for numpad module
- Numpad keymap for numpad module
- ISO, ANSI and HHKB version of keymap for right module

* Minor matrix.c fixes

* Update Readmes

Makefile

@@ -67,7 +67,7 @@ $(eval $(call NEXT_PATH_ELEMENT))
 # It's really a very simple if else chain, if you squint enough,
 # but the makefile syntax makes it very verbose.
 # If we are in a subfolder of keyboards
-# 
+#
 # *** No longer needed **
 #
 # ifeq ($(CURRENT_PATH_ELEMENT),keyboards)
@@ -307,11 +307,6 @@ define PARSE_KEYBOARD
     KEYBOARD_FOLDER_PATH_3 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_2)))
     KEYBOARD_FOLDER_PATH_4 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_3)))
     KEYBOARD_FOLDER_PATH_5 := $$(patsubst %/,%,$$(dir $$(KEYBOARD_FOLDER_PATH_4)))
-    KEYBOARD_FOLDER_1 := $$(notdir $$(KEYBOARD_FOLDER_PATH_1))
-    KEYBOARD_FOLDER_2 := $$(notdir $$(KEYBOARD_FOLDER_PATH_2))
-    KEYBOARD_FOLDER_3 := $$(notdir $$(KEYBOARD_FOLDER_PATH_3))
-    KEYBOARD_FOLDER_4 := $$(notdir $$(KEYBOARD_FOLDER_PATH_4))
-    KEYBOARD_FOLDER_5 := $$(notdir $$(KEYBOARD_FOLDER_PATH_5))
 
     KEYMAPS :=
     # get a list of all keymaps
@@ -325,35 +320,35 @@ define PARSE_KEYBOARD
         $$(KEYBOARD_FOLDER_3) $$(KEYBOARD_FOLDER_4) $$(KEYBOARD_FOLDER_5), $$(KEYMAPS)))
 
     KEYBOARD_LAYOUTS :=
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_5)/rules.mk)","")
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/rules.mk)","")
       LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_5)/rules.mk)
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/rules.mk)
       KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
     endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_4)/rules.mk)","")
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/rules.mk)","")
       LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_4)/rules.mk)
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/rules.mk)
       KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
     endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_3)/rules.mk)","")
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/rules.mk)","")
       LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_3)/rules.mk)
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/rules.mk)
       KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
     endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_2)/rules.mk)","")
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/rules.mk)","")
       LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_2)/rules.mk)
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/rules.mk)
       KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
     endif
-    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_1)/rules.mk)","")
+    ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/rules.mk)","")
       LAYOUTS :=
-      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_1)/rules.mk)
+      $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/rules.mk)
       KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS))
     endif
 
     LAYOUT_KEYMAPS :=
     $$(foreach LAYOUT,$$(KEYBOARD_LAYOUTS),$$(eval LAYOUT_KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/layouts/*/$$(LAYOUT)/*/.)))))
-    
+
     KEYMAPS := $$(sort $$(KEYMAPS) $$(LAYOUT_KEYMAPS))
 
     # if the rule after removing the start of it is empty (we haven't specified a kemap or target)

common.mk

@@ -21,4 +21,5 @@ COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
 COMMON_VPATH += $(QUANTUM_PATH)/audio
 COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
 COMMON_VPATH += $(QUANTUM_PATH)/api
+COMMON_VPATH += $(QUANTUM_PATH)/split_common
 COMMON_VPATH += $(DRIVER_PATH)

common_features.mk

@@ -210,5 +210,17 @@ QUANTUM_SRC:= \
     $(QUANTUM_DIR)/process_keycode/process_leader.c
 
 ifndef CUSTOM_MATRIX
-    QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
+    ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
+        QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
+    else
+        QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
+    endif
+endif
+
+ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
+    OPT_DEFS += -DSPLIT_KEYBOARD
+    QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
+                $(QUANTUM_DIR)/split_common/split_util.c \
+                $(QUANTUM_DIR)/split_common/i2c.c \
+                $(QUANTUM_DIR)/split_common/serial.c  
 endif

docs/_sidebar.md

@@ -55,18 +55,22 @@
   * [Userspace](feature_userspace.md)
 
 * [Keycodes](keycodes.md)
-  * [Backlight](feature_backlight.md#backlight-keycodes)
   * [Basic](keycodes_basic.md)
+  * [Quantum](quantum_keycodes.md)
+  * [Audio](feature_audio.md#audio-keycodes)
+  * [Backlight](feature_backlight.md#backlight-keycodes)
   * [Bluetooth](feature_bluetooth.md#bluetooth-keycodes)
   * [Bootmagic](feature_bootmagic.md#bootmagic-keycodes)
   * [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
   * [Mod+Key](feature_advanced_keycodes.md#modifier-keys)
   * [Mod Tap](feature_advanced_keycodes.md#mod-tap)
+  * [Mouse Keys](feature_mouse_keys.md#mapping-mouse-actions-to-keyboard-keys)
   * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
-  * [Quantum](quantum_keycodes.md)
   * [RGB Light](feature_rgblight.md#rgblight-keycodes)
+  * [RGB Matrix](feature_rgb_matrix.md#keycodes)
   * [Shifted Keys](feature_advanced_keycodes.md#shifted-keycodes)
   * [Stenography](feature_stenography.md#keycode-reference)
+  * [Swap Hands](feature_swap_hands.md#swap-keycodes)
   * [Thermal Printer](feature_thermal_printer.md#thermal-printer-keycodes)
   * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
 

docs/_summary.md

@@ -43,7 +43,9 @@
   * [Pointing Device](feature_pointing_device.md)
   * [PS/2 Mouse](feature_ps2_mouse.md)
   * [RGB Lighting](feature_rgblight.md)
-  * [Space Cadet](feature_space_cadet.md)
+  * [RGB Matrix](feature_rgb_matrix.md)
+  * [Space Cadet Shift](feature_space_cadet.md)
+  * [Space Cadet Shift Enter](feature_space_shift_cadet.md)
   * [Stenography](feature_stenography.md)
   * [Swap Hands](feature_swap_hands.md)
   * [Tap Dance](feature_tap_dance.md)
@@ -57,8 +59,8 @@
   * [Quantum](quantum_keycodes.md)
   * [Audio](feature_audio.md#audio-keycodes)
   * [Backlight](feature_backlight.md#backlight-keycodes)
-  * [Bootmagic](feature_bootmagic.md#bootmagic-keycodes)
   * [Bluetooth](feature_bluetooth.md#bluetooth-keycodes)
+  * [Bootmagic](feature_bootmagic.md#bootmagic-keycodes)
   * [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
   * [Mod+Key](feature_advanced_keycodes.md#modifier-keys)
   * [Mod Tap](feature_advanced_keycodes.md#mod-tap)

docs/config_options.md

@@ -179,6 +179,16 @@ If you define these options you will enable the associated feature, which may in
 * `#define MOUSEKEY_MAX_SPEED 7`
 * `#define MOUSEKEY_WHEEL_DELAY 0`
 
+## Split Keyboard Options
+
+Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
+
+* `#define SPLIT_HAND_PIN B7`
+  * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace 'B7' with the pin you are using. This is optional and you can still use the EEHANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
+  
+* `#define USE_I2C`
+  * For using I2C instead of Serial (defaults to serial)
+
 # The `rules.mk` File
 
 This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.
@@ -232,3 +242,5 @@ Use these to enable or disable building certain features. The more you have enab
   * Unicode
 * `BLUETOOTH_ENABLE`
   * Enable Bluetooth with the Adafruit EZ-Key HID
+* `SPLIT_KEYBOARD`
+  * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common

docs/feature_userspace.md

@@ -31,6 +31,20 @@ The reason for this, is that `<name>.h` won't be added in time to add settings (
 
 So you should use the `config.h` for QMK settings, and the `<name>.h` file for user or keymap specific settings.
 
+`/users/<name>/rules.mk` will be included in the build _after_ the `rules.mk` from your keymap. This allows you to have features in your userspace `rules.mk` that depend on individual QMK features that may or may not be available on a specific keyboard. For example, if you have RGB control features shared between all your keyboards that support RGB lighting, you can `define RGB_ENABLE` in your keymap `rules.mk` and then check for the variable in your userspace `rules.mk` like this:
+```make
+ifdef RGB_ENABLE
+    # Include my fancy rgb functions source here
+endif
+```
+Because of this, any time you turn on QMK features in your `users/<name>/rules.mk`, you should conditionally enable them only if the flag isn't already defined, like this:
+```make
+ifndef TAP_DANCE_ENABLE
+    TAP_DANCE_ENABLE = yes
+endif
+```
+This will ensure that you can explicitly turn off features for an individual keymap.
+
 ## Readme
 
 Please include authorship (your name, github username, email), and optionally [a license that's GPL compatible](https://www.gnu.org/licenses/license-list.html#GPLCompatibleLicenses).
@@ -122,4 +136,4 @@ By default the userspace used will be the same as the keymap name. In some situa
 
 ```
 USER_NAME := mylayout
-```
+```

docs/getting_started_make_guide.md

@@ -133,6 +133,10 @@ This consumes about 5390 bytes.
 
 This enables [key lock](feature_key_lock.md). This consumes an additional 260 bytes.
 
+`SPLIT_KEYBOARD`
+
+This enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
+
 ## Customizing Makefile Options on a Per-Keymap Basis
 
 If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard.

drivers/avr/i2c_master.c

@@ -15,15 +15,15 @@
 void i2c_init(void)
 {
   TWSR = 0;     /* no prescaler */
-	TWBR = (uint8_t)TWBR_val;
+  TWBR = (uint8_t)TWBR_val;
 }
 
 i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
 {
-	// reset TWI control register
+  // reset TWI control register
-	TWCR = 0;
+  TWCR = 0;
-	// transmit START condition
+  // transmit START condition
-	TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
+  TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
 
   uint16_t timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -32,13 +32,13 @@ i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
     }
   }
 
-	// check if the start condition was successfully transmitted
+  // check if the start condition was successfully transmitted
-	if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return I2C_STATUS_ERROR; }
+  if(((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)){ return I2C_STATUS_ERROR; }
 
-	// load slave address into data register
+  // load slave address into data register
-	TWDR = address;
+  TWDR = address;
-	// start transmission of address
+  // start transmission of address
-	TWCR = (1<<TWINT) | (1<<TWEN);
+  TWCR = (1<<TWINT) | (1<<TWEN);
 
   timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -47,19 +47,19 @@ i2c_status_t i2c_start(uint8_t address, uint16_t timeout)
     }
   }
 
-	// check if the device has acknowledged the READ / WRITE mode
+  // check if the device has acknowledged the READ / WRITE mode
-	uint8_t twst = TW_STATUS & 0xF8;
+  uint8_t twst = TW_STATUS & 0xF8;
-	if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return I2C_STATUS_ERROR;
+  if ( (twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK) ) return I2C_STATUS_ERROR;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_write(uint8_t data, uint16_t timeout)
 {
-	// load data into data register
+  // load data into data register
-	TWDR = data;
+  TWDR = data;
-	// start transmission of data
+  // start transmission of data
-	TWCR = (1<<TWINT) | (1<<TWEN);
+  TWCR = (1<<TWINT) | (1<<TWEN);
 
   uint16_t timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -68,16 +68,16 @@ i2c_status_t i2c_write(uint8_t data, uint16_t timeout)
     }
   }
 
-	if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return I2C_STATUS_ERROR; }
+  if( (TW_STATUS & 0xF8) != TW_MT_DATA_ACK ){ return I2C_STATUS_ERROR; }
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 int16_t i2c_read_ack(uint16_t timeout)
 {
 
-	// start TWI module and acknowledge data after reception
+  // start TWI module and acknowledge data after reception
-	TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
 
   uint16_t timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -86,15 +86,15 @@ int16_t i2c_read_ack(uint16_t timeout)
     }
   }
 
-	// return received data from TWDR
+  // return received data from TWDR
-	return TWDR;
+  return TWDR;
 }
 
 int16_t i2c_read_nack(uint16_t timeout)
 {
 
-	// start receiving without acknowledging reception
+  // start receiving without acknowledging reception
-	TWCR = (1<<TWINT) | (1<<TWEN);
+  TWCR = (1<<TWINT) | (1<<TWEN);
 
   uint16_t timeout_timer = timer_read();
   while( !(TWCR & (1<<TWINT)) ) {
@@ -103,39 +103,39 @@ int16_t i2c_read_nack(uint16_t timeout)
     }
   }
 
-	// return received data from TWDR
+  // return received data from TWDR
-	return TWDR;
+  return TWDR;
 }
 
 i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
-	if (status) return status;
-
-	for (uint16_t i = 0; i < length; i++) {
-		status = i2c_write(data[i], timeout);
-    if (status) return status;
-	}
-
-	status = i2c_stop(timeout);
   if (status) return status;
 
-	return I2C_STATUS_SUCCESS;
+  for (uint16_t i = 0; i < length; i++) {
+    status = i2c_write(data[i], timeout);
+    if (status) return status;
+  }
+
+  status = i2c_stop(timeout);
+  if (status) return status;
+
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_status_t status = i2c_start(address | I2C_READ, timeout);
-	if (status) return status;
+  if (status) return status;
 
-	for (uint16_t i = 0; i < (length-1); i++) {
+  for (uint16_t i = 0; i < (length-1); i++) {
     status = i2c_read_ack(timeout);
     if (status >= 0) {
       data[i] = status;
     } else {
       return status;
     }
-	}
+  }
 
   status = i2c_read_nack(timeout);
   if (status >= 0 ) {
@@ -147,47 +147,47 @@ i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16
   status = i2c_stop(timeout);
   if (status) return status;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_status_t status = i2c_start(devaddr | 0x00, timeout);
-	if (status) return status;
-
-	status = i2c_write(regaddr, timeout);
   if (status) return status;
 
-	for (uint16_t i = 0; i < length; i++) {
+  status = i2c_write(regaddr, timeout);
+  if (status) return status;
+
+  for (uint16_t i = 0; i < length; i++) {
     status = i2c_write(data[i], timeout);
-		if (status) return status;
+    if (status) return status;
-	}
+  }
 
-	status = i2c_stop(timeout);
+  status = i2c_stop(timeout);
   if (status) return status;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_status_t status = i2c_start(devaddr, timeout);
-	if (status) return status;
+  if (status) return status;
 
   status = i2c_write(regaddr, timeout);
   if (status) return status;
 
   status = i2c_start(devaddr | 0x01, timeout);
-	if (status) return status;
+  if (status) return status;
 
-	for (uint16_t i = 0; i < (length-1); i++) {
+  for (uint16_t i = 0; i < (length-1); i++) {
-		status = i2c_read_ack(timeout);
+    status = i2c_read_ack(timeout);
     if (status >= 0) {
       data[i] = status;
     } else {
       return status;
     }
-	}
+  }
 
   status = i2c_read_nack(timeout);
   if (status >= 0 ) {
@@ -199,13 +199,13 @@ i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16
   status = i2c_stop(timeout);
   if (status) return status;
 
-	return I2C_STATUS_SUCCESS;
+  return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_stop(uint16_t timeout)
 {
-	// transmit STOP condition
+  // transmit STOP condition
-	TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
 
   uint16_t timeout_timer = timer_read();
   while(TWCR & (1<<TWSTO)) {
@@ -215,4 +215,4 @@ i2c_status_t i2c_stop(uint16_t timeout)
   }
 
   return I2C_STATUS_SUCCESS;
-}
+}

drivers/avr/i2c_master.h

@@ -28,4 +28,4 @@ i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint1
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_stop(uint16_t timeout);
 
-#endif // I2C_MASTER_H
+#endif // I2C_MASTER_H

drivers/avr/i2c_slave.c

@@ -5,96 +5,64 @@
 #include <avr/io.h>
 #include <util/twi.h>
 #include <avr/interrupt.h>
+#include <stdbool.h>
 
 #include "i2c_slave.h"
 
 void i2c_init(uint8_t address){
-	// load address into TWI address register
+    // load address into TWI address register
-	TWAR = (address << 1);
+    TWAR = (address << 1);
-	// set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
+    // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
-	TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+    TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN);
 }
 
 void i2c_stop(void){
-	// clear acknowledge and enable bits
+    // clear acknowledge and enable bits
-	TWCR &= ~( (1<<TWEA) | (1<<TWEN) );
+    TWCR &= ~((1 << TWEA) | (1 << TWEN));
 }
 
 ISR(TWI_vect){
-	
+    uint8_t ack = 1;
-	// temporary stores the received data
+    // temporary stores the received data
-	uint8_t data;
+    //uint8_t data;
-	
+    
-	// own address has been acknowledged
+    switch(TW_STATUS){
-	if( (TWSR & 0xF8) == TW_SR_SLA_ACK ){  
+        case TW_SR_SLA_ACK:
-		buffer_address = 0xFF;
+            // The device is now a slave receiver
-		// clear TWI interrupt flag, prepare to receive next byte and acknowledge
+            slave_has_register_set = false;
-		TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEA) | (1<<TWEN); 
+            break;
-	}
+
-	else if( (TWSR & 0xF8) == TW_SR_DATA_ACK ){ // data has been received in slave receiver mode
+        case TW_SR_DATA_ACK:
-		
+            // This device is a slave receiver and has received data
-		// save the received byte inside data 
+            // First byte is the location then the bytes will be writen in buffer with auto-incriment
-		data = TWDR;
+            if(!slave_has_register_set){
-		
+                buffer_address = TWDR;
-		// check wether an address has already been transmitted or not
+
-		if(buffer_address == 0xFF){
+                if (buffer_address >= RX_BUFFER_SIZE){ // address out of bounds dont ack
-			
+                    ack = 0;
-			buffer_address = data; 
+                    buffer_address = 0;
-			
+                }
-			// clear TWI interrupt flag, prepare to receive next byte and acknowledge
+                slave_has_register_set = true; // address has been receaved now fill in buffer
-			TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEA) | (1<<TWEN); 
+            } else {
-		}
+                rxbuffer[buffer_address] = TWDR;
-		else{ // if a databyte has already been received
+                buffer_address++;
-			
+            }
-			// store the data at the current address
+            break;
-			rxbuffer[buffer_address] = data;
+
-			
+        case TW_ST_SLA_ACK:
-			// increment the buffer address
+        case TW_ST_DATA_ACK:
-			buffer_address++;
+            // This device is a slave transmitter and master has requested data
-			
+            TWDR = txbuffer[buffer_address];
-			// if there is still enough space inside the buffer
+            buffer_address++;
-			if(buffer_address < 0xFF){
+            break;
-				// clear TWI interrupt flag, prepare to receive next byte and acknowledge
+
-				TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEA) | (1<<TWEN); 
+        case TW_BUS_ERROR:
-			}
+            // We got an error, reset i2c
-			else{
+            TWCR = 0;
-				// Don't acknowledge
+        default:
-				TWCR &= ~(1<<TWEA); 
+            break;
-				// clear TWI interrupt flag, prepare to receive last byte.
+    }
-				TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEN); 
+
-			}
+    // Reset i2c state mahcine to be ready for next interrupt
-		}
+    TWCR |= (1 << TWIE) | (1 << TWINT) | (ack << TWEA) | (1 << TWEN);
-	}
+}
-	else if( (TWSR & 0xF8) == TW_ST_DATA_ACK ){ // device has been addressed to be a transmitter
-		
-		// copy data from TWDR to the temporary memory
-		data = TWDR;
-		
-		// if no buffer read address has been sent yet
-		if( buffer_address == 0xFF ){
-			buffer_address = data;
-		}
-		
-		// copy the specified buffer address into the TWDR register for transmission
-		TWDR = txbuffer[buffer_address];
-		// increment buffer read address
-		buffer_address++;
-		
-		// if there is another buffer address that can be sent
-		if(buffer_address < 0xFF){
-			// clear TWI interrupt flag, prepare to send next byte and receive acknowledge
-			TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEA) | (1<<TWEN); 
-		}
-		else{
-			// Don't acknowledge
-			TWCR &= ~(1<<TWEA); 
-			// clear TWI interrupt flag, prepare to receive last byte.
-			TWCR |= (1<<TWIE) | (1<<TWINT) | (1<<TWEN); 
-		}
-		
-	}
-	else{
-		// if none of the above apply prepare TWI to be addressed again
-		TWCR |= (1<<TWIE) | (1<<TWEA) | (1<<TWEN);
-	} 
-}

drivers/avr/i2c_slave.h

@@ -8,12 +8,16 @@
 #ifndef I2C_SLAVE_H
 #define I2C_SLAVE_H
 
+#define TX_BUFFER_SIZE 30
+#define RX_BUFFER_SIZE 30
+
 volatile uint8_t buffer_address;
-volatile uint8_t txbuffer[0xFF];
+static volatile bool slave_has_register_set = false;
-volatile uint8_t rxbuffer[0xFF];
+volatile uint8_t txbuffer[TX_BUFFER_SIZE];
+volatile uint8_t rxbuffer[RX_BUFFER_SIZE];
 
 void i2c_init(uint8_t address);
 void i2c_stop(void);
 ISR(TWI_vect);
 
-#endif // I2C_SLAVE_H
+#endif // I2C_SLAVE_H

keyboards/dc01/arrow/arrow.c

@@ -0,0 +1,43 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "arrow.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/dc01/arrow/arrow.h

@@ -0,0 +1,41 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef ARROW_H
+#define ARROW_H
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_ALL( \
+    K00, K01, K02, \
+    K10, K11, K12, \
+                   \
+         K31,      \
+    K40, K41, K42  \
+) \
+{ \
+    { K00, K01, K02 }, \
+    { K10, K11, K12 }, \
+    { XXX, XXX, XXX }, \
+    { XXX, K31, XXX }, \
+    { K40, K41, K42 }  \
+}
+
+#endif

keyboards/dc01/arrow/config.h

@@ -0,0 +1,151 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1012
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Mechboards
+#define PRODUCT         DC01 Arrow
+#define DESCRIPTION     Arrow cluster of DC01 keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B0, C7, C6, B6, B4 }
+#define MATRIX_COL_PINS { F0, B7, D2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1

keyboards/dc01/arrow/keymaps/default/keymap.c

@@ -0,0 +1,42 @@
+/* Copyright 2018 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_ALL( /* Base */
+    KC_INS,  KC_HOME,  KC_PGUP, \
+    KC_DEL,  KC_END,   KC_PGDN, \
+                                \
+             KC_UP,             \
+    KC_LEFT, KC_DOWN,  KC_RIGHT \
+),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/dc01/arrow/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# The default ANSI keymap for DC01 Arrow cluster
+
+When using the arrow module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.

keyboards/dc01/arrow/matrix.c

@@ -0,0 +1,404 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+#include "i2c_slave.h"
+#include "lufa.h"
+
+#define SLAVE_I2C_ADDRESS 0x23
+
+/* Set 0 if debouncing isn't needed */
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+#if (DIODE_DIRECTION == COL2ROW)
+
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+
+#       else
+            read_cols_on_row(matrix, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix, current_col);
+#       endif
+
+    }
+
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+            debouncing = false;
+        }
+#   endif
+        
+        if (USB_DeviceState != DEVICE_STATE_Configured){
+            txbuffer[1] = 0x55;
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++){
+                txbuffer[i+2] = matrix[i]; //send matrix over i2c
+            }
+        }
+    
+    matrix_scan_quantum();
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+#if (DEBOUNCING_DELAY > 0)
+    if (debouncing) return false;
+#endif
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif
+
+//this replases tmk code
+void matrix_setup(void){
+    
+    if (USB_DeviceState != DEVICE_STATE_Configured){
+        i2c_init(SLAVE_I2C_ADDRESS); //setup address of slave i2c
+        sei(); //enable interupts
+    }
+}

keyboards/dc01/arrow/readme.md

@@ -0,0 +1,15 @@
+# DC01 Arrow Cluster
+
+![DC01 Arrow Cluster](https://i.imgur.com/PTn0sp8.jpg)
+
+A hotpluggable four part keyboard which comes together with magnets and pogo pins! This is the arrow cluster
+
+Keyboard Maintainer: [Yiancar](https://github.com/yiancar)  
+Hardware Supported: Runs on an atmega32u4  
+Hardware Availability: [Mechboards](https://mechboards.co.uk/)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dc01/arrow:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/dc01/arrow/rules.mk

@@ -0,0 +1,74 @@
+SRC += matrix.c \
+       ../../../drivers/avr/i2c_slave.c
+
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
+NO_USB_STARTUP_CHECK = yes  # Disable initialization only when usb is plugged in
+CUSTOM_MATRIX = yes         # Use custom matrix

keyboards/dc01/left/config.h

@@ -0,0 +1,152 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1010
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Mechboards
+#define PRODUCT         DC01 Left
+#define DESCRIPTION     Left half of DC01 keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 21
+#define MATRIX_COLS_SCANNED 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B6, B5, B4, D7, D6 }
+#define MATRIX_COL_PINS { F4, F1, F0, F7, F6, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1

keyboards/dc01/left/i2c.c

@@ -0,0 +1,159 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}

keyboards/dc01/left/i2c.h

@@ -0,0 +1,31 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+#endif

keyboards/dc01/left/keymaps/default/keymap.c

@@ -0,0 +1,38 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_ANSI( /* Base */
+  KC_ESC,    KC_1,   KC_2,   KC_3,   KC_4,   KC_5, KC_6,       KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSPC,    KC_INS,  KC_HOME,  KC_PGUP,    KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,  \
+  KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,       KC_Y, KC_U, KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,    KC_DEL,  KC_END,   KC_PGDN,    KC_P7,    KC_P8,    KC_P9,    KC_PPLS,  \
+  KC_CAPS,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,       KC_H, KC_J, KC_K,    KC_L,   KC_SCLN, KC_QUOT,          KC_ENT,                                    KC_P4,    KC_P5,    KC_P6,    KC_NO,    \
+  KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,       KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,                   KC_RSFT,             KC_UP,                KC_P1,    KC_P2,    KC_P3,              \
+  KC_LCTL,   KC_LGUI,  KC_LALT,  KC_SPC,                 KC_SPC,    KC_SPC,    KC_RALT,    KC_RGUI,     KC_RGUI, KC_RCTL,    KC_LEFT, KC_DOWN,  KC_RIGHT,   KC_P0,    KC_NO,    KC_PDOT,  KC_PENT   \
+),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}

keyboards/dc01/left/keymaps/default/readme.md

@@ -0,0 +1,9 @@
+# The default ANSI keymap for DC01 Left
+
+The keymap looks like a full layout keymap.
+
+This is because the left part of the keyboard acts as the masterm coordinating all four part.
+
+When using the keyboard to connect the other three parts, this keymap overwrites the individual keymaps of the single modules.
+
+When using a module individually, the keymap of that module will take effect.

keyboards/dc01/left/left.c

@@ -0,0 +1,43 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "left.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/dc01/left/left.h

@@ -0,0 +1,41 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef LEFT_H
+#define LEFT_H
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_ANSI( \
+    K00, K01, K02, K03, K04, K05, K45,        K07, K08, K09, K0A, K0B, K0C, K0D,   K0E, K0F, K0G,   K0H, K0J, K0K, K0L, \
+    K10, K11, K12, K13, K14, K15,        K16, K17, K18, K19, K1A, K1B, K1C, K1D,   K1E, K1F, K1G,   K1H, K1J, K1K, K1L, \
+    K20, K21, K22, K23, K24, K25,        K26, K27, K28, K29, K2A, K2B,      K2D,                    K2H, K2J, K2K, K2L, \
+    K30, K31, K32, K33, K34, K35,        K36, K37, K38, K39, K3A,           K3D,        K3F,        K3H, K3J, K3K,      \
+    K40, K41, K42, K43,                  K46, K47, K48, K49, K4A, K4B,             K4E, K4F, K4G,   K4H, K4J, K4K, K4L  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05,   XXX, K07, K08, K09, K0A, K0B, K0C, K0D,   K0E, K0F, K0G,   K0H, K0J, K0K, K0L }, \
+    { K10, K11, K12, K13, K14, K15,   K16, K17, K18, K19, K1A, K1B, K1C, K1D,   K1E, K1F, K1G,   K1H, K1J, K1K, K1L }, \
+    { K20, K21, K22, K23, K24, K25,   K26, K27, K28, K29, K2A, K2B, XXX, K2D,   XXX, XXX, XXX,   K2H, K2J, K2K, K2L }, \
+    { K30, K31, K32, K33, K34, K35,   K36, K37, K38, K39, K3A, XXX, XXX, K3D,   XXX, K3F, XXX,   K3H, K3J, K3K, XXX }, \
+    { K40, K41, K42, K43, XXX, K45,   K46, K47, K48, K49, K4A, K4B, XXX, XXX,   K4E, K4F, K4G,   K4H, K4J, K4K, K4L }  \
+}
+
+#endif

keyboards/dc01/left/matrix.c

@@ -0,0 +1,479 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+#include "i2c_master.h"
+
+#define SLAVE_I2C_ADDRESS_RIGHT 0x19
+#define SLAVE_I2C_ADDRESS_NUMPAD 0x21
+#define SLAVE_I2C_ADDRESS_ARROW 0x23
+
+#define ERROR_DISCONNECT_COUNT 5
+static uint8_t error_count_right = 0;
+static uint8_t error_count_numpad = 0;
+static uint8_t error_count_arrow = 0;
+
+/* Set 0 if debouncing isn't needed */
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS_SCANNED] = MATRIX_COL_PINS;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+
+i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset);
+//uint8_t i2c_transaction_numpad(void);
+//uint8_t i2c_transaction_arrow(void);
+
+//this replases tmk code
+void matrix_setup(void){
+    i2c_init();
+}
+
+void matrix_init(void) {
+
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+    
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+
+#       else
+            read_cols_on_row(matrix, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix, current_col);
+#       endif
+
+    }
+
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+            debouncing = false;
+        }
+#   endif
+        
+    if (i2c_transaction(SLAVE_I2C_ADDRESS_RIGHT, 0x3F, 0)){ //error has occured for main right half
+        error_count_right++;
+        if (error_count_right > ERROR_DISCONNECT_COUNT){ //disconnect half
+            for (uint8_t i = 0; i < MATRIX_ROWS ; i++) {
+                matrix[i] &= 0x3F; //mask bits to keep
+            }
+        }
+    }else{ //no error
+        error_count_right = 0;
+    }
+    
+    if (i2c_transaction(SLAVE_I2C_ADDRESS_ARROW, 0X3FFF, 8)){ //error has occured for arrow cluster
+        error_count_arrow++;
+        if (error_count_arrow > ERROR_DISCONNECT_COUNT){ //disconnect arrow cluster
+            for (uint8_t i = 0; i < MATRIX_ROWS ; i++) {
+                matrix[i] &= 0x3FFF; //mask bits to keep
+            }
+        }
+    }else{ //no error
+        error_count_arrow = 0;
+    }
+
+    if (i2c_transaction(SLAVE_I2C_ADDRESS_NUMPAD, 0x1FFFF, 11)){ //error has occured for numpad
+        error_count_numpad++;
+        if (error_count_numpad > ERROR_DISCONNECT_COUNT){ //disconnect numpad
+            for (uint8_t i = 0; i < MATRIX_ROWS ; i++) {
+                matrix[i] &= 0x1FFFF; //mask bits to keep
+            }
+        }
+    }else{ //no error
+        error_count_numpad = 0;
+    }
+
+    matrix_scan_quantum();
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+#if (DEBOUNCING_DELAY > 0)
+    if (debouncing) return false;
+#endif
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS_SCANNED; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS_SCANNED; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS_SCANNED; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif
+
+// Complete rows from other modules over i2c
+i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset) {
+    i2c_status_t err = i2c_start((address << 1) | I2C_WRITE, 10);
+    if (err) return err;
+    i2c_write(0x01, 10);
+    if (err) return err;
+
+    i2c_start((address << 1) | I2C_READ, 10);
+    if (err) return err;
+
+    err = i2c_read_ack(10);
+    if (err == 0x55) { //synchronization byte
+
+    for (uint8_t i = 0; i < MATRIX_ROWS-1 ; i++) { //assemble slave matrix in main matrix
+        matrix[i] &= mask; //mask bits to keep
+        err = i2c_read_ack(10);
+        if (err >= 0) {
+            matrix[i] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
+        } else {
+             return err;
+        }
+      }
+    //last read request must be followed by a NACK
+    matrix[MATRIX_ROWS - 1] &= mask; //mask bits to keep
+    err = i2c_read_nack(10);
+    if (err >= 0) {
+        matrix[MATRIX_ROWS - 1] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
+        } else {
+            return err;
+        }
+    } else {
+        i2c_stop(10);
+        return 1;
+    }
+
+    i2c_stop(10);
+    if (err) return err;
+
+    return 0;
+}

keyboards/dc01/left/readme.md

@@ -0,0 +1,15 @@
+# DC01 Left Half
+
+![DC01 Left Half](https://i.imgur.com/PTn0sp8.jpg)
+
+A hotpluggable four part keyboard which comes together with magnets and pogo pins! This is the left part that also acts as the master.
+
+Keyboard Maintainer: [Yiancar](https://github.com/yiancar)  
+Hardware Supported: Runs on an atmega32u4  
+Hardware Availability: [Mechboards](https://mechboards.co.uk/)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dc01/left:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/dc01/left/rules.mk

@@ -0,0 +1,73 @@
+SRC += matrix.c \
+      ../../../drivers/avr/i2c_master.c
+
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
+CUSTOM_MATRIX = yes         # Use custom matrix

keyboards/dc01/numpad/config.h

@@ -0,0 +1,151 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1013
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Mechboards
+#define PRODUCT         DC01 Numpad
+#define DESCRIPTION     Numpad of DC01 keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B0, E6, D6, D7, B4 }
+#define MATRIX_COL_PINS { F0, B7, D2, D3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1

keyboards/dc01/numpad/keymaps/default/keymap.c

@@ -0,0 +1,53 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_numpad_5x4(
+    TG(1),   KC_PSLS, KC_PAST, KC_PMNS, \
+    KC_P7,   KC_P8,   KC_P9,            \
+    KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_P1,   KC_P2,   KC_P3,            \
+      KC_P0,          KC_PDOT, KC_PENT  \
+  ),
+
+  [1] = LAYOUT_numpad_5x4(
+    _______, _______, _______, _______, \
+    KC_HOME, KC_UP,   KC_PGUP,          \
+    KC_LEFT, XXXXXXX, KC_RGHT, _______, \
+    KC_END,  KC_DOWN, KC_PGDN,          \
+      KC_INS,         KC_DEL,  _______  \
+  ),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/dc01/numpad/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# The default keymap for DC01 Numpad
+
+When using the numpad module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.

keyboards/dc01/numpad/keymaps/ortho_5x4/keymap.c

@@ -0,0 +1,65 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+enum custom_keycodes {
+    KC_P00 = SAFE_RANGE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_ortho_5x4(
+    TG(1),   KC_PSLS, KC_PAST, KC_PMNS, \
+    KC_P7,   KC_P8,   KC_P9,   KC_PPLS, \
+    KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_P1,   KC_P2,   KC_P3,   KC_PENT, \
+    KC_P0,   KC_P00,  KC_PDOT, KC_PENT  \
+  ),
+
+  [1] = LAYOUT_ortho_5x4(
+    _______, _______, _______, _______, \
+    KC_HOME, KC_UP,   KC_PGUP, _______, \
+    KC_LEFT, XXXXXXX, KC_RGHT, _______, \
+    KC_END,  KC_DOWN, KC_PGDN, _______, \
+    KC_INS,  XXXXXXX, KC_DEL,  _______  \
+  ),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        switch(keycode) {
+            case KC_P00:
+                // types Numpad 0 twice
+                SEND_STRING(SS_TAP(X_KP_0) SS_TAP(X_KP_0));
+                return false;
+        }
+    }
+    return true;
+};
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/dc01/numpad/keymaps/ortho_5x4/readme.md

@@ -0,0 +1,3 @@
+# The orthopad keymap for DC01 Numpad
+
+When using the numpad module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.

keyboards/dc01/numpad/matrix.c

@@ -0,0 +1,404 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+#include "i2c_slave.h"
+#include "lufa.h"
+
+#define SLAVE_I2C_ADDRESS 0x21
+
+/* Set 0 if debouncing isn't needed */
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+#if (DIODE_DIRECTION == COL2ROW)
+
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+
+#       else
+            read_cols_on_row(matrix, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix, current_col);
+#       endif
+
+    }
+
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+            debouncing = false;
+        }
+#   endif
+        
+        if (USB_DeviceState != DEVICE_STATE_Configured){
+            txbuffer[1] = 0x55;
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++){
+                txbuffer[i+2] = matrix[i]; //send matrix over i2c
+            }
+        }
+    
+    matrix_scan_quantum();
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+#if (DEBOUNCING_DELAY > 0)
+    if (debouncing) return false;
+#endif
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif
+
+//this replases tmk code
+void matrix_setup(void){
+    
+    if (USB_DeviceState != DEVICE_STATE_Configured){
+        i2c_init(SLAVE_I2C_ADDRESS); //setup address of slave i2c
+        sei(); //enable interupts
+    }
+}

keyboards/dc01/numpad/numpad.c

@@ -0,0 +1,43 @@
+/* Copyright 2018 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "numpad.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/dc01/numpad/numpad.h

@@ -0,0 +1,56 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef NUMPAD_H
+#define NUMPAD_H
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_numpad_5x4( \
+    K00, K01, K02, K03, \
+    K10, K11, K12, K13, \
+    K20, K21, K22,      \
+    K30, K31, K32,      \
+    K40,      K42, K43  \
+) \
+{ \
+    { K00, K01, K02, K03 }, \
+    { K10, K11, K12, K13 }, \
+    { K20, K21, K22, XXX }, \
+    { K30, K31, K32, XXX }, \
+    { K40, XXX, K42, K43 }  \
+}
+
+#define LAYOUT_ortho_5x4( \
+    K00, K01, K02, K03, \
+    K10, K11, K12, K13, \
+    K20, K21, K22, K23, \
+    K30, K31, K32, K33, \
+    K40, K41, K42, K43  \
+) \
+{ \
+    { K00, K01, K02, K03 }, \
+    { K10, K11, K12, K13 }, \
+    { K20, K21, K22, K23 }, \
+    { K30, K31, K32, K33 }, \
+    { K40, K41, K42, K43 }  \
+}
+
+#endif

keyboards/dc01/numpad/readme.md

@@ -0,0 +1,15 @@
+# DC01 Numpad
+
+![DC01 Numpad](https://i.imgur.com/PTn0sp8.jpg)
+
+A hotpluggable four part keyboard which comes together with magnets and pogo pins! This is the numpad
+
+Keyboard Maintainer: [Yiancar](https://github.com/yiancar)  
+Hardware Supported: Runs on an atmega32u4  
+Hardware Availability: [Mechboards](https://mechboards.co.uk/)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dc01/numpad:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/dc01/numpad/rules.mk

@@ -0,0 +1,74 @@
+SRC += matrix.c \
+       ../../../drivers/avr/i2c_slave.c
+
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+NO_USB_STARTUP_CHECK = yes  # Disable initialization only when usb is plugged in
+CUSTOM_MATRIX = yes         # Use custom matrix

keyboards/dc01/right/config.h

@@ -0,0 +1,151 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1011
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Mechboards
+#define PRODUCT         DC01 Right
+#define DESCRIPTION     Right half of DC01 keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 8
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { C7, C6, B6, B5, B4 }
+#define MATRIX_COL_PINS { F1, E6, F6, F5, F4, D4, D6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1

keyboards/dc01/right/keymaps/default/keymap.c

@@ -0,0 +1,38 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_ANSI( /* Base */
+            KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC, \
+    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSLS, \
+    KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT,  \
+    KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,                 KC_RSFT, \
+    KC_SPC,    KC_SPC,     KC_RALT, KC_RGUI,     KC_RGUI,    KC_RCTL  \
+),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}

keyboards/dc01/right/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# The default ANSI keymap for DC01 Right
+
+When using the right module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.

keyboards/dc01/right/keymaps/hhkb_ansi/keymap.c

@@ -0,0 +1,46 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_HHKB_ANSI( /* Base */
+            KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \
+    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,KC_BSPC,         \
+    KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,         KC_ENT,          \
+    KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,         KC_RSFT,MO(1),           \
+    KC_SPC,    KC_SPC,     KC_RALT, KC_RGUI,     KC_RGUI,    KC_RCTL          \
+),
+
+[1] = LAYOUT_HHKB_ANSI(
+            KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_INS,   KC_DEL, \
+    KC_TRNS,KC_TRNS,  KC_PSCR,  KC_SLCK,  KC_PAUS,  KC_UP,    KC_TRNS,  KC_BSPC,          \
+    KC_PAST,KC_PSLS,  KC_HOME,  KC_PGUP,  KC_LEFT,  KC_RGHT,            KC_PENT,          \
+    KC_PPLS,KC_PMNS,  KC_END,   KC_PGDN,  KC_DOWN,            KC_TRNS,  KC_TRNS,          \
+    KC_TRNS,    KC_TRNS,     KC_TRNS, KC_TRNS,     KC_TRNS,             KC_TRNS,          \
+),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}

keyboards/dc01/right/keymaps/hhkb_ansi/readme.md

@@ -0,0 +1,3 @@
+# The default HHKB ANSI keymap for DC01 Right
+
+When using the right module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.

keyboards/dc01/right/keymaps/hhkb_iso/keymap.c

@@ -0,0 +1,46 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_HHKB_ISO( /* Base */
+            KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \
+    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,                  \
+    KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT, KC_NUHS,KC_ENT,           \
+    KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,         KC_RSFT,MO(1),            \
+    KC_SPC,    KC_SPC,     KC_RALT, KC_RGUI,     KC_RGUI,    KC_RCTL           \
+),
+
+[1] = LAYOUT_HHKB_ISO(
+            KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_INS,   KC_DEL, \
+    KC_TRNS,KC_TRNS,  KC_PSCR,  KC_SLCK,  KC_PAUS,  KC_UP,    KC_TRNS,                    \
+    KC_PAST,KC_PSLS,  KC_HOME,  KC_PGUP,  KC_LEFT,  KC_RGHT,  KC_TRNS,  KC_PENT,          \
+    KC_PPLS,KC_PMNS,  KC_END,   KC_PGDN,  KC_DOWN,            KC_TRNS,  KC_TRNS,          \
+    KC_TRNS,    KC_TRNS,     KC_TRNS, KC_TRNS,     KC_TRNS,             KC_TRNS,          \
+),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}

keyboards/dc01/right/keymaps/hhkb_iso/readme.md

@@ -0,0 +1,3 @@
+# The default HHKB ISO keymap for DC01 Right
+
+When using the right module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.

keyboards/dc01/right/keymaps/iso/keymap.c

@@ -0,0 +1,38 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_ISO( /* Base */
+            KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC, \
+    KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,         \
+    KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT, KC_NUHS,KC_ENT,  \
+    KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,                 KC_RSFT, \
+    KC_SPC,    KC_SPC,     KC_RALT, KC_RGUI,     KC_RGUI,    KC_RCTL  \
+),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}

keyboards/dc01/right/keymaps/iso/readme.md

@@ -0,0 +1,3 @@
+# The default ISO keymap for DC01 Right
+
+When using the right module individually, this keymap will take effect. When using the keyboard as a whole please edit the keymap of the left module.

keyboards/dc01/right/matrix.c

@@ -0,0 +1,404 @@
+/*
+Copyright 2012 Jun Wako
+Copyright 2014 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+#include "i2c_slave.h"
+#include "lufa.h"
+
+#define SLAVE_I2C_ADDRESS 0x19
+
+/* Set 0 if debouncing isn't needed */
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+#if (DIODE_DIRECTION == COL2ROW)
+
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+
+#       else
+            read_cols_on_row(matrix, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix, current_col);
+#       endif
+
+    }
+
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+            debouncing = false;
+        }
+#   endif
+        
+        if (USB_DeviceState != DEVICE_STATE_Configured){
+            txbuffer[1] = 0x55;
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++){
+                txbuffer[i+2] = matrix[i]; //send matrix over i2c
+            }
+        }
+    
+    matrix_scan_quantum();
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+#if (DEBOUNCING_DELAY > 0)
+    if (debouncing) return false;
+#endif
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif
+
+//this replases tmk code
+void matrix_setup(void){
+    
+    if (USB_DeviceState != DEVICE_STATE_Configured){
+        i2c_init(SLAVE_I2C_ADDRESS); //setup address of slave i2c
+        sei(); //enable interupts
+    }
+}

keyboards/dc01/right/readme.md

@@ -0,0 +1,15 @@
+# DC01 Right Half
+
+![DC01 Right Half](https://i.imgur.com/PTn0sp8.jpg)
+
+A hotpluggable four part keyboard which comes together with magnets and pogo pins! This is the right part
+
+Keyboard Maintainer: [Yiancar](https://github.com/yiancar)  
+Hardware Supported: Runs on an atmega32u4  
+Hardware Availability: [Mechboards](https://mechboards.co.uk/)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dc01/right:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/dc01/right/right.c

@@ -0,0 +1,43 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "right.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/dc01/right/right.h

@@ -0,0 +1,86 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef RIGHT_H
+#define RIGHT_H
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_ANSI( \
+         K01, K02, K03, K04, K05, K06, K07, \
+    K10, K11, K12, K13, K14, K15, K16, K17, \
+    K20, K21, K22, K23, K24, K25,      K27, \
+    K30, K31, K32, K33, K34,           K37, \
+    K40, K41, K42, K43, K44, K45            \
+) \
+{ \
+    { XXX, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17 }, \
+    { K20, K21, K22, K23, K24, K25, XXX, K27 }, \
+    { K30, K31, K32, K33, K34, XXX, XXX, K37 }, \
+    { K40, K41, K42, K43, K44, K45, XXX, XXX }  \
+}
+
+#define LAYOUT_ISO( \
+         K01, K02, K03, K04, K05, K06, K07, \
+    K10, K11, K12, K13, K14, K15, K16,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, \
+    K30, K31, K32, K33, K34,           K37, \
+    K40, K41, K42, K43, K44, K45            \
+) \
+{ \
+    { XXX, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, K16, XXX }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27 }, \
+    { K30, K31, K32, K33, K34, XXX, XXX, K37 }, \
+    { K40, K41, K42, K43, K44, K45, XXX, XXX }  \
+}
+
+#define LAYOUT_HHKB_ANSI( \
+         K01, K02, K03, K04, K05, K06, K07, K00, \
+    K10, K11, K12, K13, K14, K15, K16, K17,      \
+    K20, K21, K22, K23, K24, K25,      K27,      \
+    K30, K31, K32, K33, K34,      K36, K37,      \
+    K40, K41, K42, K43, K44, K45                 \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17 }, \
+    { K20, K21, K22, K23, K24, K25, XXX, K27 }, \
+    { K30, K31, K32, K33, K34, XXX, K36, K37 }, \
+    { K40, K41, K42, K43, K44, K45, XXX, XXX }  \
+}
+
+#define LAYOUT_HHKB_ISO( \
+         K01, K02, K03, K04, K05, K06, K07, K00, \
+    K10, K11, K12, K13, K14, K15, K16,           \
+    K20, K21, K22, K23, K24, K25, K26, K27,      \
+    K30, K31, K32, K33, K34,      K36, K37,      \
+    K40, K41, K42, K43, K44, K45                 \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07 }, \
+    { K10, K11, K12, K13, K14, K15, K16, XXX }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27 }, \
+    { K30, K31, K32, K33, K34, XXX, K36, K37 }, \
+    { K40, K41, K42, K43, K44, K45, XXX, XXX }  \
+}
+
+#endif

keyboards/dc01/right/rules.mk

@@ -0,0 +1,74 @@
+SRC += matrix.c \
+       ../../../drivers/avr/i2c_slave.c
+
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs (+400)
+NO_USB_STARTUP_CHECK = yes  # Disable initialization only when usb is plugged in
+CUSTOM_MATRIX = yes         # Use custom matrix

keyboards/e6v2/le/le.h

@@ -4,7 +4,7 @@
 #include "../e6v2.h"
 
 #define LAYOUT( \
-    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0D, \
     K10,      K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
     K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
     K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \

keyboards/helix/rev2/keymaps/five_rows_jis/config.h

@@ -114,4 +114,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   #define USB_MAX_POWER_CONSUMPTION 100
 #endif
 
+#ifdef MOUSEKEY_ENABLE
+  #undef MOUSEKEY_INTERVAL
+  #define MOUSEKEY_INTERVAL 0
+
+  #undef MOUSEKEY_TIME_TO_MAX
+  #define MOUSEKEY_TIME_TO_MAX 150
+
+  #undef MOUSEKEY_MAX_SPEED
+  #define MOUSEKEY_MAX_SPEED 3
+
+  #undef MOUSEKEY_MOVE_DELTA
+  #define MOUSEKEY_MOVE_DELTA 5
+
+  #undef MOUSEKEY_DELAY
+  #define MOUSEKEY_DELAY 0
+#endif
+
 #endif /* CONFIG_USER_H */

keyboards/helix/rev2/keymaps/five_rows_jis/keymap.c

@@ -159,9 +159,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Raise JIS Normal
    * ,-----------------------------------------.             ,-----------------------------------------.
-   * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 | F12  |
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |  F7  |  F8  |  F9  | F10  | F11  |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * |      |      |      |      |      |      |             |      |      |      |      | Home |PageUp|
+   * |      |      |      |      |      |      |             | F12  |      |      |      | Home |PageUp|
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
    * |      |      |      |      |      |      |             |      |      |      |      | End  |PageDn|
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
@@ -171,8 +171,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `-------------------------------------------------------------------------------------------------'
    */
   [_RAISE] = LAYOUT( \
-    KC_F1  , KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                     KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  \
+    _______, KC_F1  , KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  \
-    _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_PGUP, \
+    _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   KC_F12 , XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_PGUP, \
     _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_END,  KC_PGDN, \
     _______, KC_BTN1, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_U, XXXXXXX, \
     _______, _______, _______, _______, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_L, KC_MS_D, KC_MS_R  \
@@ -180,9 +180,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Raise JIS Exchange L and R
    * ,-----------------------------------------.             ,-----------------------------------------.
-   * |  F7  |  F8  |  F9  |  F10 |  F11 | F12  |             |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |
+   * |  F6  |  F7  |  F8  |  F9  | F10  | F11  |             |      |  F1  |  F2  |  F3  |  F4  |  F5  |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
-   * |      |      |      |      |      |      |             |      |      |      |      |      |      |
+   * | F12  |      |      |      |      |      |             |      |      |      |      |      |      |
    * |------+------+------+------+------+------|             |------+------+------+------+------+------|
    * |      |      |      |      |      |      |             |      |      |      |      |      |      |
    * |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
@@ -192,8 +192,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `-------------------------------------------------------------------------------------------------'
    */
   [_RAI_E] = LAYOUT( \
-    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,                    KC_F1  , KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   \
+    KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,                    _______, KC_F1  , KC_F2,   KC_F3,   KC_F4,   KC_F5,   \
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+    KC_F12,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
     XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_U, XXXXXXX, XXXXXXX, _______, KC_BTN1, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, \
     _______, _______, XXXXXXX, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, _______, _______, XXXXXXX, _______, XXXXXXX  \
@@ -221,194 +221,46 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     ),
 };
 
-#elif HELIX_ROWS == 4
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	// Do it yourself :)
-};
-
 #else
 #error "undefined keymaps"
 #endif
 
+#ifdef SSD1306OLED
+char keylog[20] = {};
+const char code_to_name[60] = {
+    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
+    'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
+    'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
+    '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
+    'R', 'E', 'B', 'T', ' ', '-', ' ', '@', ' ', ' ',
+    ' ', ';', ':', ' ', ',', '.', '/', ' ', ' ', ' '};
+
+inline void set_keylog(uint16_t keycode, keyrecord_t *record)
+{
+  char name = ' ';
+  uint8_t leds = host_keyboard_leds();
+
+  if (keycode < 60)
+  {
+    name = code_to_name[keycode];
+  }
+
+  // update keylog
+  snprintf(keylog, sizeof(keylog), "\n%dx%d %2x %c %c %c %c",
+           record->event.key.row,
+           record->event.key.col,
+           keycode,
+           name,
+          (leds & (1<<USB_LED_NUM_LOCK)) ? 'N' : ' ',
+          (leds & (1<<USB_LED_CAPS_LOCK)) ? 'C' : ' ',
+          (leds & (1<<USB_LED_SCROLL_LOCK)) ? 'S' : ' '
+           );
+}
+#endif
 
 #ifdef AUDIO_ENABLE
 float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
 float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
-#endif
-
-// define variables for reactive RGB
-bool TOG_STATUS = false;
-int RGB_current_mode;
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-#ifdef ADJUST_MACRO_ENABLE
-// Setting ADJUST layer RGB back to default
-void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
-  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
-    #ifdef RGBLIGHT_ENABLE
-      rgblight_mode(RGB_current_mode);
-    #endif
-    layer_on(layer3);
-   } else {
-    layer_off(layer3);
-  }
-}
-#endif
-
-void toggle_lower_raise_layer(bool pressed, uint16_t dist_layer, uint16_t lower_layer, uint16_t raise_layer) {
-  if (pressed) {
-    //not sure how to have keyboard check mode and set it to a variable, so my work around
-    //uses another variable that would be set to true after the first time a reactive key is pressed.
-    if (!TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
-      TOG_STATUS = !TOG_STATUS;
-      #ifdef RGBLIGHT_ENABLE
-        if (dist_layer == _LOWER || dist_layer == _LOW_E) {
-          rgblight_mode(16);
-        } else {
-          rgblight_mode(15);
-        }
-      #endif
-    }
-
-    layer_on(dist_layer);
-    #ifdef ADJUST_MACRO_ENABLE
-      update_tri_layer_RGB(lower_layer, raise_layer, _ADJUST);
-    #endif
-  } else {
-    #ifdef RGBLIGHT_ENABLE
-      rgblight_mode(RGB_current_mode);   // revert RGB to initial mode prior to RGB mode change
-    #endif
-    TOG_STATUS = false;
-    layer_off(dist_layer);
-    #ifdef ADJUST_MACRO_ENABLE
-      update_tri_layer_RGB(lower_layer, raise_layer, _ADJUST);
-    #endif
-  }
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case BASE:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_qwerty);
-        #endif
-        persistent_default_layer_set(1UL<<_BASE);
-      }
-      return false;
-      break;
-    case BAS_E:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_qwerty);
-        #endif
-        persistent_default_layer_set(1UL<<_BAS_E);
-      }
-      return false;
-      break;
-    case LOWER:
-      toggle_lower_raise_layer(record->event.pressed, _LOWER, _LOWER, _RAISE);
-      return false;
-      break;
-    case LOW_E:
-      toggle_lower_raise_layer(record->event.pressed, _LOW_E, _LOW_E, _RAI_E);
-      return false;
-      break;
-    case RAISE:
-      toggle_lower_raise_layer(record->event.pressed, _RAISE, _LOWER, _RAISE);
-      return false;
-      break;
-    case RAI_E:
-      toggle_lower_raise_layer(record->event.pressed, _RAI_E, _LOW_E, _RAI_E);
-      return false;
-      break;
-    case ADJUST:
-        if (record->event.pressed) {
-          #ifdef RGBLIGHT_ENABLE
-            rgblight_mode(14);
-          #endif
-          layer_on(_ADJUST);
-        } else {
-          #ifdef RGBLIGHT_ENABLE
-            rgblight_mode(RGB_current_mode);
-          #endif
-          layer_off(_ADJUST);
-        }
-        return false;
-        break;
-    //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
-    case RGB_MOD:
-      #ifdef RGBLIGHT_ENABLE
-        if (record->event.pressed) {
-          rgblight_mode(RGB_current_mode);
-          rgblight_step();
-          RGB_current_mode = rgblight_config.mode;
-        }
-      #endif
-      return false;
-      break;
-    case EISU:
-      if (record->event.pressed) {
-        if (keymap_config.swap_lalt_lgui==false) {
-          register_code(KC_LANG2);
-        } else {
-          SEND_STRING(SS_LALT("`"));
-        }
-      } else {
-        unregister_code(KC_LANG2);
-      }
-      return false;
-      break;
-    #ifdef KANA_ENABLE
-    case KANA:
-      if (record->event.pressed) {
-        if(keymap_config.swap_lalt_lgui==false){
-          register_code(KC_LANG1);
-        }else{
-          SEND_STRING(SS_LALT("`"));
-        }
-      } else {
-        unregister_code(KC_LANG1);
-      }
-      return false;
-      break;
-    #endif
-    case RGBRST:
-      #ifdef RGBLIGHT_ENABLE
-        if (record->event.pressed) {
-          eeconfig_update_rgblight_default();
-          rgblight_enable();
-          RGB_current_mode = rgblight_config.mode;
-        }
-      #endif
-      break;
-  }
-
-  return true;
-  // return process_layer_control(keycode, record, false) ? process_layer_control(keycode, record, true) : true;
-}
-
-void matrix_init_user(void) {
-  #ifdef AUDIO_ENABLE
-    startup_user();
-  #endif
-  #ifdef RGBLIGHT_ENABLE
-    RGB_current_mode = rgblight_config.mode;
-  #endif
-  //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-  #ifdef SSD1306OLED
-    TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
-    iota_gfx_init(!has_usb());   // turns on the display
-  #endif
-}
-
-
-#ifdef AUDIO_ENABLE
 
 void startup_user()
 {
@@ -431,8 +283,168 @@ void music_scale_user(void)
   PLAY_SONG(music_scale);
 }
 
+#else
+float tone_qwerty;
+float music_scale;
+#define PLAY_SONG(tone)
 #endif
 
+// define variables for reactive RGB
+int RGB_current_mode;
+#ifdef ADJUST_MACRO_ENABLE
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    RGBLIGHT(RGB_current_mode);
+    layer_on(layer3);
+   } else {
+    layer_off(layer3);
+  }
+}
+#define ADJUST_MACRO(layer1, layer2, layer3) update_tri_layer_RGB(layer1, layer2, layer3)
+#else
+#define ADJUST_MACRO(layer1, layer2, layer3)
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+#define RGBLIGHT(mode) rgblight_mode(mode)
+#else
+#define RGBLIGHT(mode)
+#endif
+
+
+inline void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool TOG_STATUS = false;
+
+void toggle_lower_raise_layer(bool pressed, uint16_t dist_layer, uint16_t lower_layer, uint16_t raise_layer) {
+  if (pressed) {
+    //not sure how to have keyboard check mode and set it to a variable, so my work around
+    //uses another variable that would be set to true after the first time a reactive key is pressed.
+    if (!TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
+      TOG_STATUS = !TOG_STATUS;
+      #ifdef RGBLIGHT_ENABLE
+        rgblight_mode((dist_layer == _LOWER || dist_layer == _LOW_E) ? 16 : 15);
+      #endif
+    }
+
+    layer_on(dist_layer);
+    ADJUST_MACRO(lower_layer, raise_layer, _ADJUST);
+  } else {
+    RGBLIGHT(RGB_current_mode);   // revert RGB to initial mode prior to RGB mode change
+    TOG_STATUS = false;
+    layer_off(dist_layer);
+    ADJUST_MACRO(lower_layer, raise_layer, _ADJUST);
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  #ifdef SSD1306OLED
+    if (record->event.pressed) {
+      set_keylog(keycode, record);
+    }
+  #endif
+
+  switch (keycode) {
+    case BASE:
+      if (record->event.pressed) {
+        PLAY_SONG(tone_qwerty);
+        persistent_default_layer_set(1UL<<_BASE);
+      }
+      break;
+    case BAS_E:
+      if (record->event.pressed) {
+        PLAY_SONG(tone_qwerty);
+        persistent_default_layer_set(1UL<<_BAS_E);
+      }
+      break;
+    case LOWER:
+      toggle_lower_raise_layer(record->event.pressed, _LOWER, _LOWER, _RAISE);
+      break;
+    case LOW_E:
+      toggle_lower_raise_layer(record->event.pressed, _LOW_E, _LOW_E, _RAI_E);
+      break;
+    case RAISE:
+      toggle_lower_raise_layer(record->event.pressed, _RAISE, _LOWER, _RAISE);
+      break;
+    case RAI_E:
+      toggle_lower_raise_layer(record->event.pressed, _RAI_E, _LOW_E, _RAI_E);
+      break;
+    case ADJUST:
+        if (record->event.pressed) {
+          RGBLIGHT(14);
+          layer_on(_ADJUST);
+        } else {
+          RGBLIGHT(RGB_current_mode);
+          layer_off(_ADJUST);
+        }
+        break;
+    //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
+    case RGB_MOD:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          rgblight_mode(RGB_current_mode);
+          rgblight_step();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      break;
+    case EISU:
+      if (record->event.pressed) {
+        if (keymap_config.swap_lalt_lgui==false) {
+          register_code(KC_LANG2);
+        } else {
+          SEND_STRING(SS_LALT("`"));
+        }
+      } else {
+        unregister_code(KC_LANG2);
+      }
+      break;
+    #ifdef KANA_ENABLE
+    case KANA:
+      if (record->event.pressed) {
+        if(keymap_config.swap_lalt_lgui==false){
+          register_code(KC_LANG1);
+        }else{
+          SEND_STRING(SS_LALT("`"));
+        }
+      } else {
+        unregister_code(KC_LANG1);
+      }
+      break;
+    #endif
+    case RGBRST:
+      #ifdef RGBLIGHT_ENABLE
+        if (record->event.pressed) {
+          eeconfig_update_rgblight_default();
+          rgblight_enable();
+          RGB_current_mode = rgblight_config.mode;
+        }
+      #endif
+      break;
+    default:
+      return true;
+  }
+
+  return false;
+}
+
+void matrix_init_user(void) {
+  #ifdef AUDIO_ENABLE
+    startup_user();
+  #endif
+  #ifdef RGBLIGHT_ENABLE
+    RGB_current_mode = rgblight_config.mode;
+  #endif
+  //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+  #ifdef SSD1306OLED
+    TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
+    iota_gfx_init(!has_usb());   // turns on the display
+  #endif
+}
 
 //SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
 #ifdef SSD1306OLED
@@ -441,7 +453,7 @@ void matrix_scan_user(void) {
   iota_gfx_task();  // this is what updates the display continuously
 }
 
-void matrix_update(struct CharacterMatrix *dest,
+inline void matrix_update(struct CharacterMatrix *dest,
                           const struct CharacterMatrix *source) {
   if (memcmp(dest->display, source->display, sizeof(dest->display))) {
     memcpy(dest->display, source->display, sizeof(dest->display));
@@ -459,76 +471,62 @@ void matrix_update(struct CharacterMatrix *dest,
 #define L_RAI_E (1<<_RAI_E)
 #define L_ADJUST_TRIE (L_ADJUST|L_RAI_E|L_LOW_E)
 
-static void render_logo(struct CharacterMatrix *matrix) {
+const char helix_logo[]={
+  0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+  0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+  0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
+  0};
+inline void render_logo(struct CharacterMatrix *matrix) {
 
-  static char logo[]={
+  matrix_write(matrix, helix_logo);
-    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
-    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
-    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
-    0};
-  matrix_write(matrix, logo);
-  //matrix_write_P(&matrix, PSTR(" Split keyboard kit"));
 }
 
-
+const char mac_win_logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
-
+inline void render_status(struct CharacterMatrix *matrix) {
-void render_status(struct CharacterMatrix *matrix) {
 
   // Render to mode icon
-  static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
   if(keymap_config.swap_lalt_lgui==false){
-    matrix_write(matrix, logo[0][0]);
+    matrix_write(matrix, mac_win_logo[0][0]);
     matrix_write_P(matrix, PSTR("\n"));
-    matrix_write(matrix, logo[0][1]);
+    matrix_write(matrix, mac_win_logo[0][1]);
   } else {
-    matrix_write(matrix, logo[1][0]);
+    matrix_write(matrix, mac_win_logo[1][0]);
     matrix_write_P(matrix, PSTR("\n"));
-    matrix_write(matrix, logo[1][1]);
+    matrix_write(matrix, mac_win_logo[1][1]);
   }
 
   // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-  char buf[16];
+  char buf[20];
   matrix_write_P(matrix, PSTR("\nLayer: "));
-    switch (layer_state) {
+  switch (layer_state) {
-      case L_BASE:
+    case L_BASE:
-        if (default_layer_state == (1UL<<_BAS_E)) {
+      matrix_write_P(matrix, default_layer_state == (1UL<<_BAS_E) ? PSTR("BaseEx") : PSTR("Base"));
-          matrix_write_P(matrix, PSTR("Base_Ex"));
+      break;
-        } else {
+    case L_RAISE:
-          matrix_write_P(matrix, PSTR("Base"));
+      matrix_write_P(matrix, PSTR("Raise"));
-        }
+      break;
-        break;
+    case L_RAI_E:
-      case L_RAISE:
+      matrix_write_P(matrix, PSTR("RaiseEx"));
-        matrix_write_P(matrix, PSTR("Raise"));
+      break;
-        break;
+    case L_LOWER:
-      case L_RAI_E:
+      matrix_write_P(matrix, PSTR("Lower"));
-        matrix_write_P(matrix, PSTR("Raise_Ex"));
+      break;
-        break;
+    case L_LOW_E:
-      case L_LOWER:
+      matrix_write_P(matrix, PSTR("LowerEx"));
-        matrix_write_P(matrix, PSTR("Lower"));
+      break;
-        break;
+    case L_ADJUST:
-      case L_LOW_E:
+    case L_ADJUST_TRI:
-        matrix_write_P(matrix, PSTR("Lower_Ex"));
+    case L_ADJUST_TRIE:
-        break;
+      matrix_write_P(matrix, PSTR("Adjust"));
-      case L_ADJUST:
+      break;
-      case L_ADJUST_TRI:
+    default:
-      case L_ADJUST_TRIE:
+      snprintf(buf, sizeof(buf), "%d", (short)layer_state);
-        matrix_write_P(matrix, PSTR("Adjust"));
+      matrix_write(matrix, buf);
-        break;
+  }
-      default:
-        snprintf(buf, sizeof(buf), "Undef-%d", (short)layer_state);
-        matrix_write(matrix, buf);
-    }
 
-  // Host Keyboard LED Status
+  matrix_write(matrix, keylog);
-  char led[32];
-  snprintf(led, sizeof(led), "\n%s  %s  %s",
-          (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-          (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-          (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(matrix, led);
 }
 
-
 void iota_gfx_task_user(void) {
   struct CharacterMatrix matrix;
 

keyboards/helix/rev2/keymaps/five_rows_jis/readme.md

@@ -61,9 +61,9 @@ Raise Layer
 
 ```
  ,-----------------------------------------.             ,-----------------------------------------.
- |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 | F12  |
+ |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |  F7  |  F8  |  F9  | F10  | F11  |
  |------+------+------+------+------+------|             |------+------+------+------+------+------|
- |      |      |      |      |      |      |             |      |      |      |      | Home |PageUp|
+ |      |      |      |      |      |      |             | F12  |      |      |      | Home |PageUp|
  |------+------+------+------+------+------|             |------+------+------+------+------+------|
  |      |      |      |      |      |      |             |      |      |      |      | End  |PageDn|
  |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
@@ -113,9 +113,9 @@ Raise Layer
 
 ```
         ,-----------------------------------------.,-----------------------------------------.
-        |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  ||  F7  |  F8  |  F9  |  F10 |  F11 | F12  |
+        |      |  F1  |  F2  |  F3  |  F4  |  F5  ||  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |
         |------+------+------+------+------+------||------+------+------+------+------+------|
-        |      |      |      |      |      |      ||      |      |      |      |      |      |
+        |      |      |      |      |      |      || F12  |      |      |      |      |      |
         |------+------+------+------+------+------||------+------+------+------+------+------|
         |      |      |      |      |      |      ||      |      |      |      |      |      |
  ,------+------+------+------+------+------+------||------+------+------+------+------+------+------.

keyboards/helix/rev2/keymaps/five_rows_jis/readme_jp.md

@@ -67,9 +67,9 @@ Raiseレイヤー
 
 ```
  ,-----------------------------------------.             ,-----------------------------------------.
- |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 | F12  |
+ |      |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |  F7  |  F8  |  F9  | F10  | F11  |
  |------+------+------+------+------+------|             |------+------+------+------+------+------|
- |      |      |      |      |      |      |             |      |      |      |      | Home |PageUp|
+ |      |      |      |      |      |      |             | F12  |      |      |      | Home |PageUp|
  |------+------+------+------+------+------|             |------+------+------+------+------+------|
  |      |      |      |      |      |      |             |      |      |      |      | End  |PageDn|
  |------+------+------+------+------+------+------+------+------+------+------+------+------+------|
@@ -129,9 +129,9 @@ Raiseレイヤー
 
 ```
         ,-----------------------------------------.,-----------------------------------------.
-        |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  ||  F7  |  F8  |  F9  |  F10 |  F11 | F12  |
+        |      |  F1  |  F2  |  F3  |  F4  |  F5  ||  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |
         |------+------+------+------+------+------||------+------+------+------+------+------|
-        |      |      |      |      |      |      ||      |      |      |      |      |      |
+        |      |      |      |      |      |      || F12  |      |      |      |      |      |
         |------+------+------+------+------+------||------+------+------+------+------+------|
         |      |      |      |      |      |      ||      |      |      |      |      |      |
  ,------+------+------+------+------+------+------||------+------+------+------+------+------+------.

keyboards/iris/keymaps/drashna/config.h

@@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
+#pragma once
-#define CONFIG_USER_H
-
-#include "config_common.h"
 
 /* Use I2C or Serial, not both */
 
@@ -52,6 +49,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif //RGBLIGHT_ENABLE
 #endif //AUDIO_ENABLE
 
+#define QMK_ESC_OUTPUT F6 // usually COL
+#define QMK_ESC_INPUT D7 // usually ROW
+#define QMK_LED B0
+#define QMK_SPEAKER C6
 
 #undef PRODUCT
 #ifdef KEYBOARD_iris_rev2
@@ -64,7 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define CTRL_LED1 7
 #define CTRL_LED2 10
 
-#define GUI_LED1 8
+#define ALT_LED1 8
-#define GUI_LED2 9
+#define GUI_LED1 9
 
-#endif

keyboards/iris/keymaps/drashna/keymap.c

@@ -43,47 +43,47 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                        _______, _______, _______,         _______, _______, _______
   ),
 
+  [_GAMEPAD] = LAYOUT_wrapper(
+     KC_ESC,  KC_NO,   KC_1,    KC_2,    KC_3,    KC_P,                          _______, _______, _______, _______, _______, _______,
+     KC_F1,   KC_K,    KC_Q,    KC_W,    KC_E,    KC_R,                          _______, _______, _______, _______, _______, _______,
+     KC_TAB,  KC_G,    KC_A,    KC_S,    KC_D,    KC_F,                          _______, _______, _______, _______, _______, _______,
+     KC_LCTL, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_H,    TG_GAME,     _______, _______, _______, _______, _______, _______, _______,
+                                       LOWER,   KC_V,    KC_SPC,          _______, _______, _______
+  ),
+
 
   [_LOWER] = LAYOUT_wrapper(
      _______, _________________FUNC_LEFT_________________,                       _________________FUNC_RIGHT________________, _______,
-     KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                       KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+     KC_TILD, _________________LOWER_L1__________________,                       _________________LOWER_R1__________________, _______,
-     _______, _______, _______, _______, _______, _______,                       _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+     _______, ___________________BLANK___________________,                       _________________LOWER_R2__________________, KC_PIPE,
-     _______, _______, _______, _______, _______, _______, _______,     _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______,
+     _______, ___________________BLANK___________________, _______,     _______, _________________LOWER_R3__________________, _______,
                                        _______, _______, _______,         _______, _______, _______
   ),
 
   [_RAISE] = LAYOUT_wrapper(
       _______, _________________FUNC_LEFT_________________,                      _________________FUNC_RIGHT________________, _______,
-      KC_GRV,  ________________NUMBER_LEFT________________,                      ________________NUMBER_RIGHT_______________, _______,
+      KC_GRV,  _________________RAISE_L1__________________,                      _________________RAISE_R1__________________, _______,
-      _______, _______, _______, _______, _______, _______,                      _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+      _______, _________________RAISE_L2__________________,                      _________________RAISE_R2__________________, KC_BSLS,
-      _______, _______, _______, _______, _______, _______, _______,    _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  _______,
+      _______, _________________RAISE_L3__________________, _______,    _______, _________________RAISE_R3__________________, _______,
                                         _______, _______, _______,        _______, _______, _______
    ),
 
   [_ADJUST] = LAYOUT_wrapper(
-      KC_MAKE, _______, _______, _______, _______, _______,                      KC_SEC1, KC_SEC2, KC_SEC3, KC_SEC4, KC_SEC5, KC_RST,
+      KC_MAKE, _______, _______, _______, _______, _______,                      _________________ADJUST_R1_________________, KC_RST,
-      VRSN,    RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_TOG,                      KC_NUKE, _______, _______, _______, _______, EPRM,
+      VRSN,    _________________ADJUST_L1_________________,                      KC_NUKE, _______, _______, _______, _______, EPRM,
-      _______, _______, CK_TOGG, AU_ON,   AU_OFF,  AG_NORM,                      AG_SWAP, QWERTY,  COLEMAK, DVORAK,  WORKMAN, TG(_MODS),
+      _______, _________________ADJUST_L2_________________,                      _________________ADJUST_R2_________________, TG_MODS,
-      _______, RGB_SMOD,RGB_HUD, RGB_SAD, RGB_VAD, KC_RGB_T,_______,    _______, MG_NKRO, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY,
+      _______, _________________ADJUST_L3_________________, TG_GAME,    _______, _________________ADJUST_R3_________________, KC_MPLY,
                                         _______, _______, _______,        _______, _______, _______
    )
 
 };
 
 
-bool indicator_is_this_led_used(uint8_t index) {
+void matrix_init_keymap(void) {
-  switch (index) {
+  DDRD &= ~(1<<5);
-#ifdef INDICATOR_LIGHTS
+  PORTD &= ~(1<<5);
-    case SHFT_LED1:
+
-    case SHFT_LED2:
+  DDRB &= ~(1<<0);
-    case CTRL_LED1:
+  PORTB &= ~(1<<0);
-    case CTRL_LED2:
-    case GUI_LED1:
-    case GUI_LED2:
-      return true;
-      break;
-#endif
-    default:
-    return false;
-  }
 }
+

keyboards/iris/keymaps/drashna/rules.mk

@@ -13,3 +13,5 @@ SWAP_HANDS_ENABLE = no
 INDICATOR_LIGHTS  = yes
 MACROS_ENABLED    = no
 RGBLIGHT_TWINKLE  = yes
+
+BOOTLOADER        = qmk-dfu

keyboards/iris/keymaps/drashna_old/config.h

@@ -52,6 +52,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif //RGBLIGHT_ENABLE
 #endif //AUDIO_ENABLE
 
+#define QMK_ESC_OUTPUT F6 // usually COL
+#define QMK_ESC_INPUT D7 // usually ROW
+#define QMK_LED B0
+#define QMK_SPEAKER C6
 
 #undef PRODUCT
 #ifdef KEYBOARD_iris_rev2
@@ -64,7 +68,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define CTRL_LED1 6
 #define CTRL_LED2 9
 
-#define GUI_LED1 7
+#define ALT_LED1 7
-#define GUI_LED2 8
+#define GUI_LED1 8
 
 #endif

keyboards/iris/keymaps/drashna_old/keymap.c

@@ -1,89 +1 @@
-
+// placeholder
-#include QMK_KEYBOARD_H
-#include "drashna.h"
-
-#define KC_ALAP ALT_T(KC_APP)
-#define KC_OSLG OSM(MOD_LGUI)
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-  [_QWERTY] = LAYOUT_wrapper(
-     KC_ESC,  ________________NUMBER_LEFT________________,                       ________________NUMBER_RIGHT_______________, KC_MINS,
-     KC_TAB , _________________QWERTY_L1_________________,                       _________________QWERTY_R1_________________, KC_BSLS,
-     KC_CCCV, _________________QWERTY_L2_________________,                       _________________QWERTY_R2_________________, KC_QUOT,
-     KC_MLSF, _________________QWERTY_L3_________________, KC_ALAP,     KC_OSLG, _________________QWERTY_R3_________________, KC_MRSF,
-                             LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE
-  ),
-  [_COLEMAK] = LAYOUT_wrapper(
-     KC_ESC , ________________NUMBER_LEFT________________,                       ________________NUMBER_RIGHT_______________, KC_MINS,
-     KC_TAB , _________________COLEMAK_L1________________,                       _________________COLEMAK_R1________________, KC_BSLS,
-     KC_CCCV, _________________COLEMAK_L2________________,                       _________________COLEMAK_R2________________, KC_QUOT,
-     KC_MLSF, _________________COLEMAK_L3________________, KC_ALAP,     KC_OSLG, _________________COLEMAK_R3________________, KC_MRSF,
-                             LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE
-  ),
-  [_DVORAK] = LAYOUT_wrapper(
-     KC_ESC,  ________________NUMBER_LEFT________________,                       ________________NUMBER_RIGHT_______________, KC_MINS,
-     KC_TAB , _________________DVORAK_L1_________________,                       _________________DVORAK_R1_________________, KC_BSLS,
-     KC_CCCV, _________________DVORAK_L2_________________,                       _________________DVORAK_R2_________________, KC_QUOT,
-     KC_MLSF, _________________DVORAK_L3_________________, KC_ALAP,     KC_OSLG, _________________DVORAK_R3_________________, KC_MRSF,
-                             LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE
-  ),
-  [_WORKMAN] = LAYOUT_wrapper(
-     KC_ESC,  ________________NUMBER_LEFT________________,                       ________________NUMBER_RIGHT_______________, KC_MINS,
-     KC_TAB , _________________WORKMAN_L1________________,                       _________________WORKMAN_R1________________, KC_BSLS,
-     KC_CCCV, _________________WORKMAN_L2________________,                       _________________WORKMAN_R2________________, KC_QUOT,
-     KC_MLSF, _________________WORKMAN_L3________________, KC_ALAP,     KC_OSLG, _________________WORKMAN_R3________________, KC_MRSF,
-                             LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE
-  ),
-
-  [_MODS] = LAYOUT_wrapper(
-     _______, _______, _______, _______, _______, _______,                       _______, _______, _______, _______, _______, _______,
-     _______, _______, _______, _______, _______, _______,                       _______, _______, _______, _______, _______, _______,
-     _______, _______, _______, _______, _______, _______,                       _______, _______, _______, _______, _______, _______,
-     KC_LSFT, _______, _______, _______, _______, _______, _______,     _______, _______, _______, _______, _______, _______, KC_RSFT,
-                                       _______, _______, _______,         _______, _______, _______
-  ),
-
-
-  [_LOWER] = LAYOUT_wrapper(
-     _______, _________________FUNC_LEFT_________________,                       _________________FUNC_RIGHT________________, _______,
-     KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                       KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
-     _______, _______, _______, _______, _______, _______,                       _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
-     _______, _______, _______, _______, _______, _______, _______,     _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______,
-                                       _______, _______, _______,         _______, _______, _______
-  ),
-
-  [_RAISE] = LAYOUT_wrapper(
-      _______, _________________FUNC_LEFT_________________,                      _________________FUNC_RIGHT________________, _______,
-      KC_GRV,  ________________NUMBER_LEFT________________,                      ________________NUMBER_RIGHT_______________, _______,
-      _______, _______, _______, _______, _______, _______,                      _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-      _______, _______, _______, _______, _______, _______, _______,    _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  _______,
-                                        _______, _______, _______,        _______, _______, _______
-   ),
-
-  [_ADJUST] = LAYOUT_wrapper(
-      KC_MAKE, _______, _______, _______, _______, _______,                      KC_SEC1, KC_SEC2, KC_SEC3, KC_SEC4, KC_SEC5, KC_RST,
-      VRSN,    RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_TOG,                      KC_NUKE, _______, _______, _______, _______, EPRM,
-      _______, _______, CK_TOGG, AU_ON,   AU_OFF,  AG_NORM,                      AG_SWAP, QWERTY,  COLEMAK, DVORAK,  WORKMAN, TG(_MODS),
-      _______, RGB_SMOD,RGB_HUD, RGB_SAD, RGB_VAD, KC_RGB_T,_______,    _______, MG_NKRO, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY,
-                                        _______, _______, _______,        _______, _______, _______
-   )
-
-};
-
-
-bool indicator_is_this_led_used(uint8_t index) {
-  switch (index) {
-#ifdef INDICATOR_LIGHTS
-    case SHFT_LED1:
-    case SHFT_LED2:
-    case CTRL_LED1:
-    case CTRL_LED2:
-    case GUI_LED1:
-    case GUI_LED2:
-      return true;
-      break;
-#endif
-    default:
-    return false;
-  }
-}

keyboards/iris/keymaps/drashna_old/rules.mk

@@ -15,3 +15,7 @@ SWAP_HANDS_ENABLE = no
 INDICATOR_LIGHTS  = yes
 MACROS_ENABLED    = no
 RGBLIGHT_TWINKLE  = yes
+
+SRC += ../drashna/keymap.c
+
+BOOTLOADER        = qmk-dfu

keyboards/lets_split/keymaps/that_canadian/config.h

@@ -0,0 +1,32 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <[email protected]>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+#endif

keyboards/lets_split/keymaps/that_canadian/keymap.c

@@ -0,0 +1,163 @@
+#include QMK_KEYBOARD_H
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+  BACKLIT
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | RESET|   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Backlt| Ctrl | GUI  | Alt  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT( \
+  RESET,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  RGB_TOG, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  BACKLIT,  KC_LCTL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] =  LAYOUT( \
+  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, _______,  _______, _______,  _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(tone_qwerty);
+        #endif
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+	case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/lets_split_eh/README.md

@@ -0,0 +1,13 @@
+# Let's Split Eh?
+
+![Let's Split Eh?](https://i.imgur.com/VMQG4qw.jpg?1)
+
+This is a split 40% ortho board. It is the exact same footprint and the Let's Split keyboard by wootpatoot. This board has USB-C / RGB Underglow / and is all on-board. Meant as a drop-in replacement for the V2 Let's Split.
+
+Keyboard Maintainer: [Christopher Poole (That-Canadian)](https://github.com/That-Canadian)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make lets_split_eh/eh:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/lets_split_eh/config.h

@@ -0,0 +1,44 @@
+/*
+Copyright 2012 Jun Wako <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xE401
+#define DEVICE_VER      0x0E41
+#define MANUFACTURER    That-Canadian
+#define PRODUCT         Lets Split Eh?
+#define DESCRIPTION     An on-board component Lets Split w/ USB-C
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif

keyboards/lets_split_eh/eh/config.h

@@ -0,0 +1,49 @@
+/*
+Copyright 2012 Jun Wako <[email protected]>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef EH_CONFIG_H
+#define EH_CONFIG_H
+
+// To let configuration know this is of type EH, which will force I2C irregardless of user config
+#define EH
+// The 'EH' only uses I2C
+#define USE_I2C
+
+#include "config_common.h"
+
+/* Let's Split EH? pin-out */
+#define MATRIX_ROW_PINS { B1, B3, D7, B4 }
+#define MATRIX_COL_PINS { F4, F5, C6, B6, B5, D5 }
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN B2
+#define RGBLED_NUM 6    // Number of LEDs (each hand)
+
+/* Split Defines */
+#define SPLIT_HAND_PIN D3
+
+#endif
+

keyboards/lets_split_eh/eh/eh.c

@@ -0,0 +1,14 @@
+#include "lets_split_eh.h"
+
+void matrix_init_kb(void) {
+
+    // JTAG disable for PORT F. write JTD bit twice within four cycles.
+    MCUCR |= (1<<JTD);
+    MCUCR |= (1<<JTD);
+	
+	// Undo init of RX LED, we use that port currently
+	// DDRB &= ~(1<<0);
+	
+	matrix_init_user();
+};
+

keyboards/lets_split_eh/eh/eh.h

@@ -0,0 +1,27 @@
+#ifndef EH_H
+#define EH_H
+
+#include "lets_split_eh.h"
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+	L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+	L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+	L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05 }, \
+		{ L10, L11, L12, L13, L14, L15 }, \
+		{ L20, L21, L22, L23, L24, L25 }, \
+		{ L30, L31, L32, L33, L34, L35 }, \
+        { R00, R01, R02, R03, R04, R05 }, \
+        { R10, R11, R12, R13, R14, R15 }, \
+        { R20, R21, R22, R23, R24, R25 }, \
+        { R30, R31, R32, R33, R34, R35 } \
+	}
+    
+#define LAYOUT_ortho_4x12 LAYOUT
+
+#endif

keyboards/lets_split_eh/eh/rules.mk

@@ -0,0 +1,4 @@
+BOOTLOADER = atmel-dfu
+
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes

keyboards/lets_split_eh/keymaps/default/config.h

@@ -0,0 +1,26 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <[email protected]>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#endif

keyboards/lets_split_eh/keymaps/default/keymap.c

@@ -0,0 +1,170 @@
+#include QMK_KEYBOARD_H
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+
+#define _LOWER 3
+#define _RAISE 4
+#define _FUNCTION 15
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Func |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  | Enter|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  `   | GUI  | Alt  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT( \
+  KC_TAB,        KC_Q,   KC_W,    KC_E,    KC_R,  KC_T,   KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  MO(_FUNCTION), KC_A,   KC_S,    KC_D,    KC_F,  KC_G,   KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_ENT,  \
+  OSM(MOD_LSFT), KC_Z,   KC_X,    KC_C,    KC_V,  KC_B,   KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_QUOT, \
+  KC_LCTL,       KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      | Mute |      |  |   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT( \
+  KC_ESC,  KC_EXLM,  KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  \
+  _______, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, \
+  _______, KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, KC_MUTE, _______, KC_PIPE, \
+  _______, _______,  _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   4  |   5  |   6  |   +  |  F5  |  F6  |   -  |   =  |   [  |   ]  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |Enter |   7  |   8  |   9  |   -  |  F11 |  F12 |ISO # |ISO / | Mute |      |   \  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   ,  |   0  |  .   |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT( \
+  KC_ESC,  KC_1,    KC_2,  KC_3,   KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  \
+  _______, KC_4,    KC_5,  KC_6,   KC_PLUS, KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______, \
+  KC_ENT,  KC_7,    KC_8,  KC_9,   KC_MINS, KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS, \
+  _______, KC_COMM, KC_0,  KC_DOT, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |Taskmg|      |      |      |      |      |      |      |RGBVAI|RGBSAI|RGBHUI|caltde|
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |Qwerty|RGBVAD|RGBSAD|RGBHUD|RGBTOG|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |BLSTEP|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | RESET|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT( \
+  TSKMGR,  _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAI, RGB_HUI, CALTDEL, \
+  _______, _______, _______, _______, _______, _______, _______, QWERTY,  RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET    \
+),
+
+/* Function
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |  Up  |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Caps |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_FUNCTION] = LAYOUT( \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, \
+  KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
+)
+
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/lets_split_eh/keymaps/default/rules.mk

@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/lets_split_eh/keymaps/that_canadian/config.h

@@ -0,0 +1,26 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <[email protected]>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#endif

keyboards/lets_split_eh/keymaps/that_canadian/keymap.c

@@ -0,0 +1,170 @@
+#include QMK_KEYBOARD_H
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+
+#define _LOWER 3
+#define _RAISE 4
+#define _FUNCTION 15
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Func |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  | Enter|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |  '   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  `   | GUI  | Alt  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT( \
+  KC_TAB,        KC_Q,   KC_W,    KC_E,    KC_R,  KC_T,   KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  MO(_FUNCTION), KC_A,   KC_S,    KC_D,    KC_F,  KC_G,   KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_ENT,  \
+  OSM(MOD_LSFT), KC_Z,   KC_X,    KC_C,    KC_V,  KC_B,   KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_QUOT, \
+  KC_LCTL,       KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      | Mute |      |  |   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT( \
+  KC_ESC,  KC_EXLM,  KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  \
+  _______, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, \
+  _______, KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, KC_MUTE, _______, KC_PIPE, \
+  _______, _______,  _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   4  |   5  |   6  |   +  |  F5  |  F6  |   -  |   =  |   [  |   ]  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |Enter |   7  |   8  |   9  |   -  |  F11 |  F12 |ISO # |ISO / | Mute |      |   \  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   ,  |   0  |  .   |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT( \
+  KC_ESC,  KC_1,    KC_2,  KC_3,   KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  \
+  _______, KC_4,    KC_5,  KC_6,   KC_PLUS, KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______, \
+  KC_ENT,  KC_7,    KC_8,  KC_9,   KC_MINS, KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS, \
+  _______, KC_COMM, KC_0,  KC_DOT, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |Taskmg|      |      |      |      |      |      |      |RGBVAI|RGBSAI|RGBHUI|caltde|
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |Qwerty|RGBVAD|RGBSAD|RGBHUD|RGBTOG|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |BLSTEP|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      | RESET|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT( \
+  TSKMGR,  _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAI, RGB_HUI, CALTDEL, \
+  _______, _______, _______, _______, _______, _______, _______, QWERTY,  RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET    \
+),
+
+/* Function
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |  Up  |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Caps |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_FUNCTION] = LAYOUT( \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, \
+  KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
+)
+
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/lets_split_eh/keymaps/that_canadian/rules.mk

@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/lets_split_eh/lets_split_eh.c

@@ -0,0 +1 @@
+#include "lets_split_eh.h"

keyboards/lets_split_eh/lets_split_eh.h

@@ -0,0 +1,27 @@
+#ifndef LETS_SPLIT_EH_H
+#define LETS_SPLIT_EH_H
+
+#include "quantum.h"
+
+#ifdef KEYBOARD_lets_split_eh_eh
+    #include "eh.h"
+#endif
+
+
+// Used to create a keymap using only KC_ prefixed keys
+#define LAYOUT_kc( \
+    L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+    L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+    L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+    L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+    ) \
+    LAYOUT( \
+        KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
+        KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
+        KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
+        KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
+    )
+
+#define LAYOUT_kc_ortho_4x12 LAYOUT_kc
+
+#endif

keyboards/lets_split_eh/rules.mk

@@ -0,0 +1,70 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
+
+SPLIT_KEYBOARD = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+DEFAULT_FOLDER = lets_split_eh/eh

keyboards/lfkeyboards/lfk65_hs/config.h

@@ -0,0 +1,141 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6064
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    LFKeyboards
+#define PRODUCT         LFK65_HS
+#define DESCRIPTION     QMK keyboard firmware for LFK65_HS
+
+#define DIODE_DIRECTION COL2ROW
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+#define MATRIX_ROW_PINS {B0, B3, B2, B1, F5}
+#define MATRIX_COL_PINS {E6, F4, B7, D5, D3, D2, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4}
+#define UNUSED_PINS {}
+#define RGBLED_NUM 20     // Number of LEDs
+
+#define QMK_ESC_OUTPUT E6 // usually COL
+#define QMK_ESC_INPUT B0 // usually ROW
+#define QMK_LED F1
+// #define QMK_SPEAKER C6
+
+#define BACKLIGHT_LEVELS 8
+#define BACKLIGHT_PWM_MAP {8, 16, 40, 55, 70, 128, 200, 255}
+
+#define RGB_DI_PIN C7  // Have to set it to something to get the ws2812 code to compile
+#define RGBLED_NUM 20     // Number of LEDs
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/lfkeyboards/lfk65_hs/info.json

@@ -0,0 +1,11 @@
+{
+  "keyboard_name": "LFK65-HS",
+  "url": "https://github.com/lfkeyboards",
+  "maintainer": "LFKeyboards",
+  "width": 16,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_all": {"layout":[{"label": "~","x": 0,"y": 0},{"label": "!","x": 1,"y": 0},{"label": "@","x": 2,"y": 0},{"label": "#","x": 3,"y": 0},{"label": "$","x": 4,"y": 0},{"label": "%","x": 5,"y": 0},{"label": "^","x": 6,"y": 0},{"label": "&","x": 7,"y": 0},{"label": "*","x": 8,"y": 0},{"label": "(","x": 9,"y": 0},{"label": ")","x": 10,"y": 0},{"label": "_","x": 11,"y": 0},{"label": "+","x": 12,"y": 0},{"label": "","x": 13,"y": 0,"w": 1},{"label": "","x": 14,"y": 0,"w": 1},{"label": "Home","x": 15,"y": 0},{"label": "Tab","x": 0,"y": 1,"w": 1.5},{"label": "Q","x": 1.5,"y": 1},{"label": "W","x": 2.5,"y": 1},{"label": "E","x": 3.5,"y": 1},{"label": "R","x": 4.5,"y": 1},{"label": "T","x": 5.5,"y": 1},{"label": "Y","x": 6.5,"y": 1},{"label": "U","x": 7.5,"y": 1},{"label": "I","x": 8.5,"y": 1},{"label": "O","x": 9.5,"y": 1},{"label": "P","x": 10.5,"y": 1},{"label": "{","x": 11.5,"y": 1},{"label": "}","x": 12.5,"y": 1},{"label": "|","x": 13.5,"y": 1,"w": 1.5},{"label": "Page Up","x": 15,"y": 1},{"label": "Caps Lock","x": 0,"y": 2,"w": 1.75},{"label": "A","x": 1.75,"y": 2},{"label": "S","x": 2.75,"y": 2},{"label": "D","x": 3.75,"y": 2},{"label": "F","x": 4.75,"y": 2},{"label": "G","x": 5.75,"y": 2},{"label": "H","x": 6.75,"y": 2},{"label": "J","x": 7.75,"y": 2},{"label": "K","x": 8.75,"y": 2},{"label": "L","x": 9.75,"y": 2},{"label": ":","x": 10.75,"y": 2},{"label": "\"","x": 11.75,"y": 2},{"label": "","x": 12.75,"y": 2},{"label": "Enter","x": 13.75,"y": 2,"w": 1.25},{"label": "Page Down","x": 15,"y": 2},{"label": "Shift","x": 0,"y": 3,"w": 1.25},{"label": "","x": 1.25,"y": 3},{"label": "Z","x": 2.25,"y": 3},{"label": "X","x": 3.25,"y": 3},{"label": "C","x": 4.25,"y": 3},{"label": "V","x": 5.25,"y": 3},{"label": "B","x": 6.25,"y": 3},{"label": "N","x": 7.25,"y": 3},{"label": "M","x": 8.25,"y": 3},{"label": "<","x": 9.25,"y": 3},{"label": ">","x": 10.25,"y": 3},{"label": "?","x": 11.25,"y": 3},{"label": "Shift","x": 12.25,"y": 3,"w": 1.75},{"label": "↑","x": 14,"y": 3},{"label": "End","x": 15,"y": 3},{"label": "Ctrl","x": 0,"y": 4,"w": 1.25},{"label": "Win","x": 1.25,"y": 4,"w": 1.25},{"label": "Alt","x": 2.5,"y": 4,"w": 1.25},{"x": 3.75,"y": 4,"w": 6.25},{"label": "Alt","x": 10,"y": 4},{"label": "Fn","x": 11,"y": 4},{"label": "Ctrl","x": 12,"y": 4},{"label": "←","x": 13,"y": 4},{"label": "↓","x": 14,"y": 4},{"label": "→","x": 15,"y": 4}]},
+    "LAYOUT_ansi": {"layout":[{"label": "~","x": 0,"y": 0},{"label": "!","x": 1,"y": 0},{"label": "@","x": 2,"y": 0},{"label": "#","x": 3,"y": 0},{"label": "$","x": 4,"y": 0},{"label": "%","x": 5,"y": 0},{"label": "^","x": 6,"y": 0},{"label": "&","x": 7,"y": 0},{"label": "*","x": 8,"y": 0},{"label": "(","x": 9,"y": 0},{"label": ")","x": 10,"y": 0},{"label": "_","x": 11,"y": 0},{"label": "+","x": 12,"y": 0},{"label": "Backspace","x": 13,"y": 0,"w": 2},{"label": "Home","x": 15,"y": 0},{"label": "Tab","x": 0,"y": 1,"w": 1.5},{"label": "Q","x": 1.5,"y": 1},{"label": "W","x": 2.5,"y": 1},{"label": "E","x": 3.5,"y": 1},{"label": "R","x": 4.5,"y": 1},{"label": "T","x": 5.5,"y": 1},{"label": "Y","x": 6.5,"y": 1},{"label": "U","x": 7.5,"y": 1},{"label": "I","x": 8.5,"y": 1},{"label": "O","x": 9.5,"y": 1},{"label": "P","x": 10.5,"y": 1},{"label": "{","x": 11.5,"y": 1},{"label": "}","x": 12.5,"y": 1},{"label": "|","x": 13.5,"y": 1,"w": 1.5},{"label": "Page Up","x": 15,"y": 1},{"label": "Caps Lock","x": 0,"y": 2,"w": 1.75},{"label": "A","x": 1.75,"y": 2},{"label": "S","x": 2.75,"y": 2},{"label": "D","x": 3.75,"y": 2},{"label": "F","x": 4.75,"y": 2},{"label": "G","x": 5.75,"y": 2},{"label": "H","x": 6.75,"y": 2},{"label": "J","x": 7.75,"y": 2},{"label": "K","x": 8.75,"y": 2},{"label": "L","x": 9.75,"y": 2},{"label": ":","x": 10.75,"y": 2},{"label": "\"","x": 11.75,"y": 2},{"label": "Enter","x": 12.75,"y": 2,"w": 2.25},{"label": "Page Down","x": 15,"y": 2},{"label": "Shift","x": 0,"y": 3,"w": 2.25},{"label": "Z","x": 2.25,"y": 3},{"label": "X","x": 3.25,"y": 3},{"label": "C","x": 4.25,"y": 3},{"label": "V","x": 5.25,"y": 3},{"label": "B","x": 6.25,"y": 3},{"label": "N","x": 7.25,"y": 3},{"label": "M","x": 8.25,"y": 3},{"label": "<","x": 9.25,"y": 3},{"label": ">","x": 10.25,"y": 3},{"label": "?","x": 11.25,"y": 3},{"label": "Shift","x": 12.25,"y": 3,"w": 1.75},{"label": "↑","x": 14,"y": 3},{"label": "End","x": 15,"y": 3},{"label": "Ctrl","x": 0,"y": 4,"w": 1.25},{"label": "Win","x": 1.25,"y": 4,"w": 1.25},{"label": "Alt","x": 2.5,"y": 4,"w": 1.25},{"x": 3.75,"y": 4,"w": 6.25},{"label": "Alt","x": 10,"y": 4},{"label": "Fn","x": 11,"y": 4},{"label": "Ctrl","x": 12,"y": 4},{"label": "←","x": 13,"y": 4},{"label": "↓","x": 14,"y": 4},{"label": "→","x": 15,"y": 4}]}
+  }
+}

keyboards/lfkeyboards/lfk65_hs/keymaps/default/keymap.c

@@ -0,0 +1,79 @@
+#include QMK_KEYBOARD_H
+
+//Define a shorter 'transparent' key code to make the keymaps more compact
+#define KC_TR KC_TRNS
+
+enum keymap_layout {
+    BASE = 0,
+    FUNC,
+};
+
+// #define uint16_t int
+// #define uint8_t int
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = LAYOUT_ansi(
+  /* Keymap VANILLA: (Base Layer) Default Layer
+   * ,------------------------------------------------------------.----.
+   * |Esc~| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |  0| - | = |Backspa| Ins|
+   * |------------------------------------------------------------|----|
+   * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|     \| Del|
+   * |------------------------------------------------------------|----|
+   * |CAPS    |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgUp|
+   * |------------------------------------------------------------|----|
+   * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift  |Up |PgDn|
+   * |-----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |       Space         |Alt |Ctrl|Func|Lft| Dn |Rig |
+   * `-----------------------------------------------------------------'
+   */
+    KC_GESC,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,   KC_BSPC,  KC_INS,
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,  KC_DEL,
+    KC_CAPS,  KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,      KC_ENT,  KC_PGUP,
+    KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,   KC_UP,  KC_PGDN,
+    KC_LCTL, KC_LGUI, KC_LALT,         KC_SPC,       KC_RALT, KC_RCTL, MO(FUNC), KC_LEFT, KC_DOWN,  KC_RGHT),
+
+[FUNC] = LAYOUT_ansi(
+   /*Keymap VANILLA: Function Layer
+   * ,------------------------------------------------------------.----.
+   * |Esc~| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |  0| - | = |Backspa| Ins|
+   * |------------------------------------------------------------|----|
+   * |MuMode | |  |  |E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|     \| Del|
+   * |------------------------------------------------------------|----|
+   * |AudTgl|Hz+|MS+| |  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return |PgUp|
+   * |------------------------------------------------------------|----|
+   * |ClickTgl|Hz-|MS-|| C|  V|  B| N|MuTgl|  ,|  .|  /|Shift |Up |PgDn|
+   * |-----------------------------------------------------------------|
+   * |Ctrl|Win |Alt |       Space         |Alt |Ctrl|Func|Lft| Dn |Rig |
+   * `-----------------------------------------------------------------'
+   */
+    KC_GRV,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13,  KC_F14,
+    MU_MOD, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR,     KC_TR,  RGB_TOG,
+    AU_TOG,  KC_FN1,KC_FN3, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR, KC_TR,           RESET,  RGB_MOD,
+    KC_FN5,    KC_FN2,KC_FN4, KC_TR, KC_TR, KC_TR, KC_TR, MU_TOG, RGB_VAD, RGB_VAI, KC_TR, KC_TR,        RGB_HUI,  KC_TR,
+    KC_TR, KC_TR, KC_TR,         KC_TR,       KC_TR, KC_TR, KC_TR, RGB_SAD, RGB_HUD,  RGB_SAI),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/lfkeyboards/lfk65_hs/lfk65_hs.c

@@ -0,0 +1,34 @@
+#include <avr/sfr_defs.h>
+#include <avr/timer_avr.h>
+#include <avr/wdt.h>
+#include "lfk65_hs.h"
+#include "keymap.h"
+
+void matrix_init_kb(void)
+{
+    matrix_init_user();
+
+}
+
+void matrix_scan_kb(void)
+{
+    matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t* record)
+{
+    if (keycode == RESET) {
+        reset_keyboard_kb();
+    } else {
+    }
+    return process_record_user(keycode, record);
+}
+
+void reset_keyboard_kb(){
+#ifdef WATCHDOG_ENABLE
+    MCUSR = 0;
+    wdt_disable();
+    wdt_reset();
+#endif
+    reset_keyboard();
+}

keyboards/lfkeyboards/lfk65_hs/lfk65_hs.h

@@ -0,0 +1,82 @@
+#ifndef LFK65_HS_H
+#define LFK65_HS_H
+
+/* if the kb.h file exists (because we're running from qmkbuilder) include it */
+#ifdef __has_include
+#if __has_include("kb.h")
+#include "kb.h"
+#endif
+#endif
+
+#include "quantum.h"
+#include "matrix.h"
+#include <avr/sfr_defs.h>
+#include <stdint.h>
+
+#ifndef cbi
+#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+#endif
+
+#ifndef sbi
+#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+#endif
+
+void reset_keyboard_kb(void);
+
+/* All Keymap - contains every possible switch
+* ,-------------------------------------------------------------------------------.
+* | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D | 1E | 1F | 1G |
+* |-------------------------------------------------------------------------------|
+* | 21  | 22 |23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D |    2F   | 2G |
+* |-------------------------------------------------------------------------------|
+* | 31   | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C |      3F    | 3G |
+* |-------------------------------------------------------------------------------|
+* | 41     | 42 | 43 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C |    4D    | 4F | 4G |
+* |-------------------------------------------------------------------------------|
+* | 51  |  52  | 53  |              57        | 5A | 5B | 5C | 5D |  5E | 3E | 4E |
+* `-------------------------------------------------------------------------------'
+*/
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_all( \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, \
+    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,    k2F, k2G, \
+    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, K3D,   k3F, k3G, \
+    k41, k42, k43, k44,  k45, k46, k47, k48, k49, k4A, k4B, k4C,     k4D, k4F, k4G, \
+    k51, k52, k53,              k57,                   k5B, k5C, k5D, k5E, k3E, k4E \
+) { \
+    {k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G}, \
+    {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, KC_NO, k2F, k2G}, \
+    {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F, k3G}, \
+    {k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G}, \
+    {k51, k52, k53, KC_NO, KC_NO, KC_NO, k57, KC_NO, KC_NO, KC_NO, k5B, k5C, k5D, k5E, KC_NO, KC_NO} \
+}
+
+/* ANSI Keymap
+* ,-------------------------------------------------------------------------------.
+* | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 1A | 1B | 1C | 1D |   1E    | 1G |
+* |-------------------------------------------------------------------------------|
+* | 21   | 22 |23 | 24 | 25 | 26 | 27 | 28 | 29 | 2A | 2B | 2C | 2D |   2F   | 2G |
+* |-------------------------------------------------------------------------------|
+* | 31    | 32 |33 | 34 | 35 | 36 | 37 | 38 | 39 | 3A | 3B | 3C |      3F    | 3G |
+* |-------------------------------------------------------------------------------|
+* | 41      | 42 |43 | 45 | 46 | 47 | 48 | 49 | 4A | 4B | 4C |    4D    | 4F | 4G |
+* |-------------------------------------------------------------------------------|
+* | 51  |  52  | 53  |              57        | 5A | 5B | 5C | 5D |  5E | 3E | 4E |
+* `-------------------------------------------------------------------------------'
+*/
+#define LAYOUT_ansi( \
+    k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,         k1F, k1G, \
+    k21,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,       k2F, k2G, \
+    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,           k3F, k3G, \
+    k41,     k43, k44,  k45, k46, k47, k48, k49, k4A, k4B, k4C,         k4D, k4F, k4G, \
+    k51, k52, k53,              k57,                      k5B, k5C, k5D, k5E, k3E, k4E \
+) { \
+    {k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO, k1F, k1G}, \
+    {k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, KC_NO, k2F, k2G}, \
+    {k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, KC_NO, k3E, k3F, k3G}, \
+    {k41, KC_NO, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F, k4G}, \
+    {k51, k52, k53, KC_NO, KC_NO, KC_NO, k57, KC_NO, KC_NO, KC_NO, k5B, k5C, k5D, k5E, KC_NO, KC_NO} \
+}
+
+#endif //LFK65_HS_H

keyboards/lfkeyboards/lfk65_hs/readme.md

@@ -0,0 +1,14 @@
+LFK65-HS
+===
+
+65% layout based with hotswap support.
+
+Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)
+Hardware Supported: LFK65-HS
+Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make lfkeyboards/lfk65_hs:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/lfkeyboards/lfk65_hs/rules.mk

@@ -0,0 +1,20 @@
+MCU = atmega32u4
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+FLASH_SIZE_KB = 32
+BOOT_SECTION_SIZE_KB = 4
+BOOT_LOADER = BootloaderHID
+
+# Extra source files for IS3731 lighting
+SRC = TWIlib.c issi.c lighting.c
+
+# Processor frequency.
+F_CPU = 16000000
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT

keyboards/niu_mini/info.json

@@ -1,16 +1,18 @@
 {
-    "keyboard_name": "NIU Mini", 
+  "keyboard_name": "NIU Mini",
-    "url": "", 
+  "url": "",
-    "maintainer": "qmk", 
+  "maintainer": "qmk",
-    "width": 12, 
+  "width": 12,
-    "height": 4, 
+  "height": 4,
-    "layouts": {
+  "layouts": {
-        "LAYOUT_ortho_4x12": {
+    "LAYOUT_ortho_4x12": {
-            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
+      "key_count": 48,
-        },
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
+    },
 
-        "LAYOUT_mit": {
+    "LAYOUT_planck_mit": {
-            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3, "w":2}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
+      "key_count": 47,
-        }
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3, "w":2}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}]
     }
-}
+  }
+}

keyboards/niu_mini/keymaps/default/keymap.c

@@ -1,5 +1,9 @@
 #include QMK_KEYBOARD_H
 
+// readability
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 	/* Layer 0
@@ -13,11 +17,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	 * | Ctrl |  GUI | Caps |  Alt |Layer1|    Space    |Layer2|  /   | Left | Down |Right |
 	 * `-----------------------------------------------------------------------------------'
 	 */
-	[0] = LAYOUT_ortho_4x12(
+	[0] = LAYOUT_planck_mit(
 		KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,  KC_T,   KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSPC,
 		KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,  KC_G,   KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,
 		KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,  KC_B,   KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_UP,   KC_ENT,
-		KC_LCTL, KC_LGUI, KC_CAPS, KC_LALT, MO(1), KC_SPC, KC_SPC, MO(2), KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT
+		KC_LCTL, KC_LGUI, KC_CAPS, KC_LALT, MO(1),     KC_SPC,     MO(2), KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT
   ),
 
 	/* Layer 1
@@ -31,11 +35,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	 * | Reset|      |      |      |      |      |      |      |      |      |      |      |
 	 * `-----------------------------------------------------------------------------------'
 	 */
-	[1] = LAYOUT_ortho_4x12(
+	[1] = LAYOUT_planck_mit(
-		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_TRNS,
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
-		KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS,
+		_______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, KC_F11,  KC_F12,  _______, _______, _______,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-		RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+		RESET,   _______, _______, _______, _______,     _______,      _______, _______, _______, _______, _______
 	),
 
 	/* Layer 2 (r_ Indicates RGB Controls)
@@ -49,11 +53,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	 * |      |      |      |      |      |      |      |      |      |      |      |      |
 	 * `-----------------------------------------------------------------------------------'
 	 */
-	[2] = LAYOUT_ortho_4x12(
+	[2] = LAYOUT_planck_mit(
-		KC_TRNS, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_TRNS,
+		_______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
-		KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+		_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-		KC_TRNS, BL_TOGG, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		_______, BL_TOGG, BL_STEP, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+		_______, _______, _______, _______, _______,     _______,      _______, _______, _______, _______, _______
   )
 };
 

keyboards/niu_mini/keymaps/framtava/keymap.c

@@ -53,12 +53,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Ctrl | Alt  | GUI  |Brite |Lower |    Space    |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_QWERTY] = {
+[_QWERTY] = LAYOUT_planck_mit(
-  {KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC},
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-  {KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
-  {KC_LCTL, KC_LGUI, KC_LALT, BACKLIT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+  KC_LCTL, KC_LGUI, KC_LALT, BACKLIT, LOWER,       KC_SPC,       RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
-},
+),
 
 /* Colemak
  * ,-----------------------------------------------------------------------------------.
@@ -71,12 +71,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Ctrl | Alt  | GUI  |Brite |Lower |    Space    |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_COLEMAK] = {
+[_COLEMAK] = LAYOUT_planck_mit(
-  {KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC},
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
-  {KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT},
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
-  {KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT },
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
-  {KC_LCTL, KC_LGUI, KC_LALT, BACKLIT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+  KC_LCTL, KC_LGUI, KC_LALT, BACKLIT, LOWER,       KC_SPC,       RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
-},
+),
 
 /* Dvorak
  * ,-----------------------------------------------------------------------------------.
@@ -89,12 +89,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Ctrl | Alt  | GUI  |Brite |Lower |    Space    |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_DVORAK] = {
+[_DVORAK] = LAYOUT_planck_mit(
-  {KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC},
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
-  {KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH},
+  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
-  {KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT },
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT ,
-  {KC_LCTL, KC_LGUI, KC_LALT, BACKLIT, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT}
+  KC_LCTL, KC_LGUI, KC_LALT, BACKLIT, LOWER,       KC_SPC,       RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
-},
+),
 
 /* Lower
  * ,-----------------------------------------------------------------------------------.
@@ -107,12 +107,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_LOWER] = {
+[_LOWER] = LAYOUT_planck_mit(
-  {_______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,  KC_DEL},
+  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,  KC_DEL,
-  {KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_TILD},
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_TILD,
-  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, KC_PIPE, _______},
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, KC_PIPE, _______,
-  {_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP,  KC_END}
+  _______, _______, _______, _______, _______,     _______,      _______, KC_HOME, KC_PGDN, KC_PGUP,  KC_END
-},
+),
 
 /* Raise
  * ,-----------------------------------------------------------------------------------.
@@ -125,12 +125,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |   0  |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_RAISE] = {
+[_RAISE] = LAYOUT_planck_mit(
-  {KC_NLCK, KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,          KC_BSPC},
+  KC_NLCK, KC_1,    KC_2,    KC_3,    KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,          KC_BSPC,
-  {KC_DEL,  KC_4,    KC_5,    KC_6,    _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC,  KC_GRV},
+  KC_DEL,  KC_4,    KC_5,    KC_6,    _______, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC,  KC_GRV,
-  {_______, KC_7,    KC_8,    KC_9,    _______, _______, _______, _______, KC_PSCR, _______, KC_BSLS, _______},
+  _______, KC_7,    KC_8,    KC_9,    _______, _______, _______, _______, KC_PSCR, _______, KC_BSLS, _______,
-  {_______, _______, _______, KC_0,    _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
+  _______, _______, _______, KC_0,    _______,     _______,      _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
-},
+),
 
 /* Plover layer (http://opensteno.org)
  * ,-----------------------------------------------------------------------------------.
@@ -144,12 +144,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 
-[_PLOVER] = {
+[_PLOVER] = LAYOUT_planck_mit(
-  {KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   },
+  KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1   ,
-  {XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC},
+  XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,
-  {XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT},
+  XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-  {EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX}
+  EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,        XXXXXXX,      KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX
-},
+),
 
 /* Adjust (Lower + Raise)
  * ,-----------------------------------------------------------------------------------.
@@ -162,12 +162,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
-[_ADJUST] = {
+[_ADJUST] = LAYOUT_planck_mit(
-  {_______, RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL },
+  _______, RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL ,
-  {_______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______},
+  _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______,
-  {_______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______},
+  _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______,
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
+  _______, _______, _______, _______, _______,     _______,      _______, _______, _______, _______, _______
-},
+),
 
 /* Adjust (Lower + Raise)
  * ,-----------------------------------------------------------------------------------.
@@ -180,12 +180,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |  MOD |  HUI |  HUD |
  * `-----------------------------------------------------------------------------------'
  */
-[_BACKLIT] = {
+[_BACKLIT] = LAYOUT_planck_mit(
-  {_______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, _______, _______, _______},
+  _______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, _______, _______, _______,
-  {RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_VAD},
+  RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_VAD,
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, RGB_SAD},
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, RGB_SAD,
-  {_______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_RMOD, RGB_HUI, RGB_HUD}
+  _______, _______, _______, _______, _______,     _______,      _______, RGB_MOD, RGB_RMOD, RGB_HUI, RGB_HUD
-}
+)
 
 
 };

keyboards/niu_mini/keymaps/mason/keymap.c

@@ -25,11 +25,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * | Caps | Esc  | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
    * `-----------------------------------------------------------------------------------'
    */
-  [_QWERTY] = LAYOUT_ortho_4x12(
+  [_QWERTY] = LAYOUT_planck_mit(
     KC_TAB,  KC_Q,   KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
     KC_LCTL,  KC_A,  KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
     KC_LSFT, KC_Z,   KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
-    KC_CAPS, KC_ESC, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+    KC_CAPS, KC_ESC, KC_LALT, KC_LGUI, LOWER,       KC_SPC,       RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
   ),
 
   /* Lower
@@ -43,11 +43,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
    * `-----------------------------------------------------------------------------------'
    */
-  [_LOWER] = LAYOUT_ortho_4x12(
+  [_LOWER] = LAYOUT_planck_mit(
     _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,   KC_ASTR,    KC_LPRN, KC_RPRN, _______,
     _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,   KC_PLUS,    KC_LCBR, KC_RCBR, _______,
     _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_GRV), S(KC_BSLS), _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______,   KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+    _______, _______, _______, _______, _______,     _______,      _______,   KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
   ),
 
   /* Raise
@@ -61,11 +61,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
    * `-----------------------------------------------------------------------------------'
    */
-  [_RAISE] = LAYOUT_ortho_4x12(
+  [_RAISE] = LAYOUT_planck_mit(
     _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
     _______, KC_INS,  KC_HOME, KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______,
     _______, KC_DEL,  KC_END,  KC_PGDN, KC_NLCK, _______, _______, KC_GRV,  KC_BSLS, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+    _______, _______, _______, _______, _______,     _______,      _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
   ),
 
   /* Adjust (Lower + Raise)
@@ -79,11 +79,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |      |      |      |      |      |             |      |      |      |      |      |
    * `-----------------------------------------------------------------------------------'
    */
-  [_ADJUST] = LAYOUT_ortho_4x12(
+  [_ADJUST] = LAYOUT_planck_mit(
     _______, RESET,   DEBUG,   _______, _______, _______, _______, _______, _______, _______, _______, KC_POWER,
     _______, BL_TOGG, BL_STEP, _______, _______, _______, _______, _______, _______, _______, _______, _______,
     _______, RGB_TOG, RGB_HUI, RGB_HUD, RGB_MOD, RGB_SAI, RGB_SAD, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    _______, _______, _______, _______, _______,     _______,      _______, _______, _______, _______, _______
   )
 };
 

keyboards/niu_mini/keymaps/planck/keymap.c

@@ -52,11 +52,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_QWERTY] = LAYOUT_ortho_4x12(
+[_QWERTY] = LAYOUT_planck_mit(
   KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
   KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
-  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,       KC_SPC,       RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
 ),
 
 /* Colemak
@@ -70,11 +70,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_COLEMAK] = LAYOUT_ortho_4x12(
+[_COLEMAK] = LAYOUT_planck_mit(
   KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
   KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
-  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,       KC_SPC,       RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
 ),
 
 /* Dvorak
@@ -88,11 +88,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_DVORAK] = LAYOUT_ortho_4x12(
+[_DVORAK] = LAYOUT_planck_mit(
   KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
   KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
   KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT ,
-  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,       KC_SPC,       RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
 ),
 
 /* Lower
@@ -106,11 +106,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_LOWER] = LAYOUT_ortho_4x12(
+[_LOWER] = LAYOUT_planck_mit(
   KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
-  _______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+  _______, _______, _______, _______, _______,     _______,      _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
 ),
 
 /* Raise
@@ -124,11 +124,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_RAISE] = LAYOUT_ortho_4x12(
+[_RAISE] = LAYOUT_planck_mit(
   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
   KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
   _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+  _______, _______, _______, _______, _______,     _______,      _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
 
 /* Plover layer (http://opensteno.org)
@@ -143,11 +143,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 
-[_PLOVER] = LAYOUT_ortho_4x12(
+[_PLOVER] = LAYOUT_planck_mit(
   KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,    KC_1,
   XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,
   XXXXXXX, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-  EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,    XXXXXXX, XXXXXXX, KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX
+  EXT_PLV, XXXXXXX, XXXXXXX, KC_C,    KC_V,        XXXXXXX,      KC_N,    KC_M,    XXXXXXX, XXXXXXX, XXXXXXX
 ),
 
 /* Adjust (Lower + Raise)
@@ -161,11 +161,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
-[_ADJUST] = LAYOUT_ortho_4x12(
+[_ADJUST] = LAYOUT_planck_mit(
   _______, RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL ,
   _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  PLOVER,  _______,
   _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  _______, _______, _______, _______, _______,     _______,      _______, _______, _______, _______, _______
 )
 
 

keyboards/niu_mini/keymaps/xtonhasvim/keymap.c

@@ -15,7 +15,6 @@
  */
 
 #include QMK_KEYBOARD_H
-#include "action_layer.h"
 #include "xtonhasvim.h"
 
 /************************************
@@ -52,12 +51,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * - Holding A or ; switches to movement layer.
  * - Raise and Lower are one-shot layers.
  */
-[_QWERTY] = {
+[_QWERTY] = LAYOUT_planck_mit(
-  {KC_TAB,  KC_Q,           KC_W,    KC_E,    KC_R,          KC_T,    KC_Y,    KC_U,          KC_I,    KC_O,    KC_P,              KC_BSPC},
+    KC_TAB,         KC_Q,           KC_W,    KC_E,    KC_R,        KC_T,   KC_Y,   KC_U,        KC_I,    KC_O,    KC_P,              KC_BSPC,
-  {LCTL_T(KC_ESC), LT(_MOVE,KC_A), KC_S,    KC_D,    KC_F,          KC_G,    KC_H,    KC_J,          KC_K,    KC_L,    LT(_MOVE,KC_SCLN), KC_QUOT},
+    LCTL_T(KC_ESC), LT(_MOVE,KC_A), KC_S,    KC_D,    KC_F,        KC_G,   KC_H,   KC_J,        KC_K,    KC_L,    LT(_MOVE,KC_SCLN), KC_QUOT,
-  {KC_LSFT, KC_Z,           KC_X,    KC_C,    KC_V,          KC_B,    KC_N,    KC_M,          KC_COMM, KC_DOT,  KC_SLSH,   RSFT_T(KC_ENT) },
+    KC_LSFT,        KC_Z,           KC_X,    KC_C,    KC_V,        KC_B,   KC_N,   KC_M,        KC_COMM, KC_DOT,  KC_SLSH,           RSFT_T(KC_ENT),
-  {TG(_MOUSE), X_____X,  KC_LALT, KC_LGUI, OSL(_LOWER),   KC_SPC,  KC_SPC,  OSL(_RAISE),   KC_LGUI, KC_LALT, X_____X, VIM_START }
+    TG(_MOUSE),     X_____X,        KC_LALT, KC_LGUI, OSL(_LOWER),     KC_SPC,     OSL(_RAISE), KC_LGUI, KC_LALT, X_____X,           VIM_START
-},
+),
 
 /* Lower
  * ,-----------------------------------------------------------------------------------.
@@ -70,12 +69,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      | Bail |      |      |      |             |      |      |      | Bail |      |
  * `-----------------------------------------------------------------------------------'
  */
-[_LOWER] = {
+[_LOWER] = LAYOUT_planck_mit(
-  {KC_TILD,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_BSPC},
+    KC_TILD, KC_F1,       KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,      KC_PLUS, KC_LCBR, KC_RCBR,     KC_BSPC,
-  {KC_DEL, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_PIPE},
+    KC_DEL,  KC_EXLM,     KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,      KC_ASTR, KC_LPRN, KC_RPRN,     KC_PIPE,
-  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  X_____X, KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY},
+    _______, KC_F7,       KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  X_____X,      KC_MNXT, KC_VOLD, KC_VOLU,     KC_MPLY,
-  {X_____X, TO(_QWERTY), _______, _______, _______, KC_BSPC, KC_BSPC, OSL(_ADJUST),    _______,    _______, TO(_QWERTY), X_____X}
+    X_____X, TO(_QWERTY), _______, _______, _______,     KC_BSPC,      OSL(_ADJUST), _______, _______, TO(_QWERTY), X_____X
-},
+),
 
 /* Raise
  * ,-----------------------------------------------------------------------------------.
@@ -88,12 +87,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      | Bail |      |      |      |             |      |      |      | Bail |      |
  * `-----------------------------------------------------------------------------------'
  */
-[_RAISE] = {
+[_RAISE] = LAYOUT_planck_mit(
-  {KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSPC},
+    KC_GRV,  KC_F1,       KC_F2,   KC_F3,   KC_F4,        KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC,     KC_BSPC,
-  {KC_DEL,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS},
+    KC_DEL,  KC_1,        KC_2,    KC_3,    KC_4,         KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,        KC_BSLS,
-  {_______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY},
+    _______, KC_F7,       KC_F8,   KC_F9,   KC_F10,       KC_F11,  KC_F12,  _______, KC_MNXT, KC_VOLD, KC_VOLU,     KC_MPLY,
-  {X_____X, TO(_QWERTY), _______, _______, OSL(_ADJUST), X_____X, X_____X, _______, _______, _______, TO(_QWERTY), X_____X}
+    X_____X, TO(_QWERTY), _______, _______, OSL(_ADJUST),     X_____X,      _______, _______, _______, TO(_QWERTY), X_____X
-},
+),
 
 
 /* Adjust (Lower + Raise)
@@ -107,48 +106,48 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |  RGB   | Bail |      |      |      |             |      |      |      | Bail |      |
  * `-------------------------------------------------------------------------------------'
  */
-[_ADJUST] = {
+[_ADJUST] = LAYOUT_planck_mit(
-  {RGB_MODE_PLAIN, RESET,   DEBUG,   _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL },
+    RGB_MODE_PLAIN,   RESET,       DEBUG,   _______, _______, _______, _______, _______, _______, _______, _______,     KC_DEL,
-  {RGB_MODE_REVERSE, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, _______, _______, _______, _______, RGB_VAI},
+    RGB_MODE_REVERSE, _______,     MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, _______, _______, _______, _______,     RGB_VAI,
-  {RGB_MODE_FORWARD, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, RGB_VAD},
+    RGB_MODE_FORWARD, MUV_DE,      MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______,     RGB_VAD,
-  {RGB_TOG, TO(_QWERTY), _______, _______, _______, _______, _______, _______, _______, _______, TO(_QWERTY), X_____X}
+    RGB_TOG,          TO(_QWERTY), _______, _______, _______,     _______,      _______, _______, _______, TO(_QWERTY), X_____X
-},
+),
 
 
 /* movement layer (hold semicolon)
  */
-[_MOVE] = {
+[_MOVE] = LAYOUT_planck_mit(
-  {TO(_QWERTY), X_____X, X_____X, X_____X, X_____X, X_____X, KC_HOME, KC_PGDN, KC_PGUP, KC_END, X_____X, X_____X},
+    TO(_QWERTY), X_____X,     X_____X,       X_____X,             X_____X,             X_____X,       KC_HOME, KC_PGDN, KC_PGUP, KC_END,  X_____X,     X_____X,
-  {_______,     X_____X, LGUI(KC_LBRC), LGUI(LSFT(KC_LBRC)), LGUI(LSFT(KC_RBRC)), LGUI(KC_RBRC), KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, X_____X, X_____X},
+    _______,     X_____X,     LGUI(KC_LBRC), LGUI(LSFT(KC_LBRC)), LGUI(LSFT(KC_RBRC)), LGUI(KC_RBRC), KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, X_____X,     X_____X,
-  {_______,     X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, _______},
+    _______,     X_____X,     X_____X,       X_____X,             X_____X,             X_____X,       X_____X, X_____X, X_____X, X_____X, X_____X,     _______,
-  {X_____X,     TO(_QWERTY), _______, _______, _______, X_____X, X_____X, _______, _______, _______, TO(_QWERTY), X_____X}
+    X_____X,     TO(_QWERTY), _______,       _______,             _______,                   X_____X,          _______, _______, _______, TO(_QWERTY), X_____X
-},
+),
 
 /* mouse layer
  */
-[_MOUSE] = {
+[_MOUSE] = LAYOUT_planck_mit(
-  {TO(_QWERTY), X_____X, X_____X, KC_MS_UP, X_____X, X_____X, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_UP, KC_MS_WH_RIGHT, X_____X, X_____X  },
+    TO(_QWERTY), X_____X,     X_____X,    KC_MS_UP,   X_____X,     X_____X, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_UP, KC_MS_WH_RIGHT, X_____X,     X_____X,
-  {_______,     X_____X, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, X_____X, X_____X, KC_MS_BTN1, KC_MS_BTN2, KC_MS_BTN3, X_____X, X_____X},
+    _______,     X_____X,     KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, X_____X, X_____X,       KC_MS_BTN1,    KC_MS_BTN2,  KC_MS_BTN3,     X_____X,     X_____X,
-  {_______,     X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, X_____X, _______},
+    _______,     X_____X,     X_____X,    X_____X,    X_____X,     X_____X, X_____X,       X_____X,       X_____X,     X_____X,        X_____X,     _______,
-  {_______,     TO(_QWERTY), _______, _______, _______, X_____X, X_____X, _______, _______, _______, TO(_QWERTY), X_____X}
+    _______,     TO(_QWERTY), _______,    _______,    _______,         X_____X,            _______,       _______,     _______,        TO(_QWERTY), X_____X
-},
+),
 
 /* vim edit mode. just has an escape -> _CMD key */
-[_EDIT] = {
+[_EDIT] = LAYOUT_planck_mit(
-  {_______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+    _______,   _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______,
-  {VIM_START,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+    VIM_START, _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______,
-  {_______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+    _______,   _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______,
-  {_______,     TO(_QWERTY), _______, _______, _______, _______, _______, _______, _______, _______, TO(_QWERTY), _______}
+    _______,   TO(_QWERTY), _______, _______, _______,     _______,      _______, _______, _______, TO(_QWERTY), _______
-},
+),
 
 /* vim command layer.
  */
-[_CMD] = {
+[_CMD] = LAYOUT_planck_mit(
-  {X_____X, X_____X, VIM_W, VIM_E, X_____X, X_____X, VIM_Y, VIM_U, VIM_I, VIM_O, VIM_P, X_____X},
+    X_____X,   X_____X,     VIM_W,   VIM_E,   X_____X, X_____X, VIM_Y,   VIM_U,   VIM_I,     VIM_O,      VIM_P,       X_____X,
-  {VIM_ESC,    VIM_A, VIM_S, VIM_D, X_____X, VIM_G, VIM_H, VIM_J, VIM_K, VIM_L, X_____X, X_____X},
+    VIM_ESC,   VIM_A,       VIM_S,   VIM_D,   X_____X, VIM_G,   VIM_H,   VIM_J,   VIM_K,     VIM_L,      X_____X,     X_____X,
-  {VIM_SHIFT,     X_____X, VIM_X, VIM_C, VIM_V, VIM_B, X_____X, X_____X, VIM_COMMA, VIM_PERIOD, X_____X, VIM_SHIFT},
+    VIM_SHIFT, X_____X,     VIM_X,   VIM_C,   VIM_V,   VIM_B,   X_____X, X_____X, VIM_COMMA, VIM_PERIOD, X_____X,     VIM_SHIFT,
-  {X_____X,     TO(_QWERTY), _______, _______, X_____X, X_____X, X_____X, X_____X, _______, _______, TO(_QWERTY), X_____X}
+    X_____X,   TO(_QWERTY), _______, _______, X_____X,     X_____X,      X_____X, _______,   _______,    TO(_QWERTY), X_____X
-}
+)
 
 };