Remove superfluous JTAG disable code (#6445)

* Remove superfluous JTAG disable code

* 32A has differently named register

* Accidentally some operators

* 32A also has different JTAG pins

* Wrap disable_jtag() in an ifndef

* Document this new define

* Rename the define, it conflicts with a LUFA thing

Also, move the ifndef wrapping to the call in keyboard_setup()

Makefile

@@ -20,7 +20,10 @@ endif
 override SILENT := false
 
 ifndef SUB_IS_SILENT
-QMK_VERSION := $(shell git describe --abbrev=0 --tags 2>/dev/null)
+ifndef SKIP_GIT
+    QMK_VERSION := $(shell git describe --abbrev=0 --tags 2>/dev/null)
+endif
+
 ifneq ($(QMK_VERSION),)
 $(info QMK Firmware $(QMK_VERSION))
 endif
@@ -94,6 +97,7 @@ $(eval $(call NEXT_PATH_ELEMENT))
 # endif
 
 define GET_KEYBOARDS
+ifndef ALT_GET_KEYBOARDS
     All_RULES_MK := $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/rules.mk))
     All_RULES_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/rules.mk))
     All_RULES_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/*/rules.mk))
@@ -105,6 +109,9 @@ define GET_KEYBOARDS
     KEYMAPS_MK += $$(patsubst $(ROOT_DIR)/keyboards/%/rules.mk,%,$$(wildcard $(ROOT_DIR)/keyboards/*/*/*/*/keymaps/*/rules.mk))
 
     KEYBOARDS := $$(sort $$(filter-out $$(KEYMAPS_MK), $$(All_RULES_MK)))
+else
+    KEYBOARDS := $(shell find keyboards/ -type f -iname "rules.mk" | grep -v keymaps | sed 's!keyboards/\(.*\)/rules.mk!\1!' | sort | uniq)
+endif
 endef
 
 $(eval $(call GET_KEYBOARDS))

docs/faq_debug.md

@@ -184,22 +184,15 @@ Pressing any key during sleep should wake host.
 
 Arduino Leonardo and micro have **ATMega32U4** and can be used for TMK, though Arduino bootloader may be a problem.
 
+## Enabling JTAG
 
-## Using PF4-7 Pins of USB AVR?
+By default, the JTAG debugging interface is disabled as soon as the keyboard starts up. JTAG-capable MCUs come from the factory with the `JTAGEN` fuse set, and it takes over certain pins of the MCU that the board may be using for the switch matrix, LEDs, etc.
-You need to set JTD bit of MCUCR yourself to use PF4-7 as GPIO. Those pins are configured to serve JTAG function by default. MCUs like ATMega*U* or AT90USB* are affected with this.
 
-If you are using Teensy this isn't needed. Teensy is shipped with JTAGEN fuse bit unprogrammed to disable the function.
+If you would like to keep JTAG enabled, just add the following to your `config.h`:
 
-See this code.
+```c
+#define NO_JTAG_DISABLE
 ```
-    // JTAG disable for PORT F. write JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
-```
-https://github.com/tmk/tmk_keyboard/blob/master/keyboard/hbkb/matrix.c#L67
-
-And read **26.5.1 MCU Control Register – MCUCR** of ATMega32U4 datasheet.
-
 
 ## Adding LED Indicators of Lock Keys
 You need your own LED indicators for CapsLock, ScrollLock and NumLock? See this post.

docs/feature_encoders.md

@@ -20,6 +20,15 @@ Additionally, the resolution can be specified in the same file (the default & su
 
     #define ENCODER_RESOLUTION 4
 
+## Split Keyboards
+
+If you are using different pinouts for the encoders on each half of a split keyboard, you can define the pinout for the right half like this:
+
+```c
+#define ENCODERS_PAD_A_RIGHT { encoder1a, encoder2a }
+#define ENCODERS_PAD_B_RIGHT { encoder1b, encoder2b }
+```
+
 ## Callbacks
 
 The callback functions can be inserted into your `<keyboard>.c`:

docs/feature_rgb_matrix.md

@@ -374,6 +374,7 @@ These are defined in [`rgblight_list.h`](https://github.com/qmk/qmk_firmware/blo
 #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set
 ```
 
 ## EEPROM storage

docs/feature_split_keyboard.md

@@ -166,6 +166,13 @@ This allows you to specify a different set of pins for the matrix on the right s
 
 This allows you to specify a different set of direct pins for the right side.
 
+```c
+#define ENCODERS_PAD_A_RIGHT { encoder1a, encoder2a }
+#define ENCODERS_PAD_B_RIGHT { encoder1b, encoder2b }
+```
+
+This allows you to specify a different set of encoder pins for the right side.
+
 ```c
 #define RGBLIGHT_SPLIT
 ```

docs/hardware_avr.md

@@ -78,7 +78,7 @@ Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately r
 #define DESCRIPTION     A custom keyboard
 ```
 
-?> Note: On Windows and macOS the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` fields will be displayed in the list of USB devices. ?> On Linux these values will not be visible in lsusb by default, since Linux takes the information from the list maintained by [USB ID Repository](http://www.linux-usb.org/usb-ids.html) by default. lsusb will show the information reported by the device when executed with -v option. It is also present in kernel logs after plugging in the device.
+?> Windows and macOS will display the `MANUFACTURER` and `PRODUCT` in the list of USB devices. `lsusb` on Linux instead takes these from the list maintained by the [USB ID Repository](http://www.linux-usb.org/usb-ids.html) by default. `lsusb -v` will show the values reported by the device, and they are also present in kernel logs after plugging it in.
 
 ### Keyboard Matrix Configuration
 

docs/zh-cn/faq_debug.md

@@ -173,23 +173,6 @@ EXTRAKEY_ENABLE = yes          # 音频控制和系统控制
 
 Arduino Leonardo和micro使用**ATMega32U4**，该芯片TMK可用，但Arduino的bootloader会导致问题。
 
-
-## 在USB AVR使用PF4-7针脚?
-你要置位MCUCR寄存器JTD位来将PF4-7设置为GPIO。这些针脚默认是JTAG功能。 像ATMega*U* or AT90USB*这样的MCU会受影响。
-
-如果是用Teensy的话就不需要了。Tennsy自带JTAGEN位未编程来失能该功能。
-<!--翻译问题：上句可能有错，原文为：Teensy is shipped with JTAGEN fuse bit unprogrammed to disable the function. -->
-代码如下。
-```
-    // F接口JTAG失能。在四个周期内写入两次JTD位。
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
-```
-https://github.com/tmk/tmk_keyboard/blob/master/keyboard/hbkb/matrix.c#L67
-
-阅读ATMega32U4的datasheet中的**26.5.1 MCU Control Register – MCUCR**。
-
-
 ## 为锁定键添加指示灯
 你要自制CapsLock, ScrollLock 和 NumLock指示灯？见下文。
 

keyboards/40percentclub/gherkin/keymaps/default/keymap.c

@@ -18,46 +18,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-void matrix_init_user(void) {
+void keyboard_pre_init_user(void) {
-}
+  // Call the keyboard pre init code.
 
-void matrix_scan_user(void) {
+  // Set our LED pins as output
-}
+  setPinOutput(D5);
-
+  setPinOutput(B0);
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
 }
 
 void led_set_user(uint8_t usb_led) {
-
+  if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+    writePinLow(D5);
-    DDRD |= (1 << 5); PORTD &= ~(1 << 5);
   } else {
-    DDRD &= ~(1 << 5); PORTD &= ~(1 << 5);
+    writePinHigh(D5);
   }
 
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    DDRB |= (1 << 0); PORTB &= ~(1 << 0);
+    writePinLow(B0);
   } else {
-    DDRB &= ~(1 << 0); PORTB &= ~(1 << 0);
+    writePinHigh(B0);
   }
-
-  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_COMPOSE)) {
-
-  } else {
-
-  }
-
-  if (usb_led & (1 << USB_LED_KANA)) {
-
-  } else {
-
-  }
-
 }

keyboards/adkb96/rev1/rev1.h

@@ -2,8 +2,6 @@
 
 #include "adkb96.h"
 
-//void promicro_bootloader_jmp(bool program);
-
 #ifdef USE_I2C
 #include <stddef.h>
 #ifdef __AVR__
@@ -12,9 +10,6 @@
 #endif
 #endif
 
-//void promicro_bootloader_jmp(bool program);
-
-
 // Keymap with right side flipped
 // (TRRS jack on both halves are to the right)
 #define LAYOUT_ortho_6x16( \

keyboards/amj96/matrix.c

@@ -63,9 +63,6 @@ void matrix_init(void)
 #ifdef UART_RGB_ENABLE
     uart_rgb_init();
 #endif
-    // disable JTAG
-    MCUCR = _BV(JTD);
-    MCUCR = _BV(JTD);
 
     // 85 REST
     DDRD |= _BV(PD7);

keyboards/atreus/keymaps/ridingqwerty/config.h

@@ -0,0 +1,13 @@
+#pragma once
+
+#undef MATRIX_ROWS
+#define MATRIX_ROWS 8
+
+#undef MATRIX_COLS
+#define MATRIX_COLS 6
+
+#undef MATRIX_ROW_PINS
+#define MATRIX_ROW_PINS { A6, A7, A8, A15, B11, B12, A14, A13 }
+
+#undef MATRIX_COL_PINS
+#define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0 }

keyboards/atreus/keymaps/ridingqwerty/keymap.c

@@ -0,0 +1,116 @@
+/* Copyright 2019 George Koenig
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "ridingqwerty.h"
+
+/*                                                         Atreus      
+        ┏━━━━━━━━┯━━━━━━━━┯━━━━━━━━┯━━━━━━━━┯━━━━━━━━┓                 ┏━━━━━━━━┯━━━━━━━━┯━━━━━━━━┯━━━━━━━━┯━━━━━━━━┓
+        ┃   Q    │   W    │   E    │   R    │   T    ┃                 ┃   Y    │   U    │   I    │   O    │   P    ┃
+        ┠────────┼────────┼────────┼────────┼────────┨                 ┠────────┼────────┼────────┼────────┼────────┨
+       /┃  ¶ A   │   S    │   D    │   F    │   G    ┃                 ┃   H    │   J    │   K    │   L    │  🔢 ;  ┃
+        ┠────────┼────────┼────────┼────────┼────────┞━━━━━━━━┳━━━━━━━━┞────────┼────────┼────────┼────────┼────────┨
+       /┃  ⇧ Z   │   X    │   C    │   V    │   B    │        ┃        │   N    │   M    │   ,    │  𝔽 .   │  ⇧ /   ┃
+        ┠────────┼────────┼────────┼────────┼────────┤  ¶ ⎋   ┃  ❦ ⇥   ├────────┼────────┼────────┼────────┼────────┨
+        ┃  ⎈ ⎋   │  ⌘ ⇥   │  ⎇ [   │  ⇧ ]   │ 🔢 ⌫   │        ┃        │  ★ ␣   │  ⇧ -   │  ⎇ =   │  ⌘ '   │  ⎈ ↵   ┃
+        ┗━━━━━━━━┷━━━━━━━━┷━━━━━━━━┷━━━━━━━━┷━━━━━━━━┷━━━━━━━━┻━━━━━━━━┷━━━━━━━━┷━━━━━━━━┷━━━━━━━━┷━━━━━━━━┷━━━━━━━━┛
+                    MODS                   //              LAYERS              //                  MODS           //
+*/
+
+#ifdef LAYOUT
+#undef LAYOUT
+#define LAYOUT( \
+    K00,   K01,   K02,   K03,   K04,                 K40,   K41,   K42,   K43,   K44, \
+    K10,   K11,   K12,   K13,   K14,                 K50,   K51,   K52,   K53,   K54, \
+    K20,   K21,   K22,   K23,   K24,                 K60,   K61,   K62,   K63,   K64, \
+    K30,   K31,   K32,   K33,   K34,   K35,   K70,   K71,   K72,   K73,   K74,   K75  \
+) { \
+  { K00, K01, K02, K03, K04, KC_NO }, \
+  { K10, K11, K12, K13, K14, KC_NO }, \
+  { K20, K21, K22, K23, K24, KC_NO }, \
+  { K30, K31, K32, K33, K34, K35   }, \
+  { K44, K43, K42, K41, K40, KC_NO }, \
+  { K54, K53, K52, K51, K50, KC_NO }, \
+  { K64, K63, K62, K61, K60, KC_NO }, \
+  { K75, K74, K73, K72, K71, K70   }  \
+}
+#endif
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT( /* Qwerty */
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+    ED_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    NM_SCLN,
+    LS_Z,    KC_X,    KC_C,    KC_V,    KC_B,                      KC_N,    KC_M,    KC_COMM, FK_DOT,  RS_SLSH,
+    LC_ESC,  LG_TAB,  LA_LBRC, LS_RBRC, NM_BSPC, ED_ESC,  SC_TAB,  SM_SPC,  RS_MINS, RA_EQL,  RG_QUOT, RC_ENT
+  ),
+  [_EDITOR] = LAYOUT( /* ED_A, ED_ESC */
+    KC_GRV,  _______, KC_END,  _______, KC_TAB,                    _______, _______, KC_INS,  _______, KC_PGUP,
+    KC_HOME, _______, KC_DELT, _______, _______,                   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_ENT, 
+    _______, _______, _______, _______, _______,                   KC_PGDN, _______, _______, _______, KC_BSLS,
+    _______, _______, _______, _______, _______, _______, KC_ENT,  _______, _______, _______, _______, _______
+  ),
+  [_NUMBER] = LAYOUT( /* NM_SCLN, NM_BSPC */
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                      KC_6,    KC_7,    KC_8,    KC_9,    KC_0,  
+    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,                      _______, KC_4,    KC_5,    KC_6,    _______,
+    _______, _______, _______, _______, _______,                   _______, KC_1,    KC_2,    KC_3,    KC_BSLS,
+    _______, _______, _______, _______, _______, KC_MINS, KC_EQL,  KC_0,    KC_0,    KC_DOT,  _______, _______
+  ),
+  [_SYMBOL] = LAYOUT( /* SM_SPC */
+    KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,
+    KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,                   _______, _______, _______, _______, KC_COLN, 
+    _______, _______, _______, _______, _______,                   _______, _______, _______, _______, KC_BSLS, 
+    _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, _______, _______, _______
+  ),
+  [_F_KEYS] = LAYOUT( /* FK_DOT */
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  
+    KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,                    _______, _______, _______, _______, KC_F11,
+    KC_F11,  KC_F12,  _______, _______, _______,                   _______, _______, _______, _______, KC_F12,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+  [_SECRET] = LAYOUT( /* shhhh... */
+    RESET,   _______, _______, RUSTY,   FUEL,                      KC_F13,  _______, _______, _______, _______,
+    AR1ST,   SYSNOC,  _______, _______, _______,                   _______, _______, _______, OS_LAB,  _______,
+    CDLOCAL, _______, C0RE,    VAXIS,   _______,                   _______, MUNKY,   _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  ),
+  [_FINAL] = LAYOUT( /* . */
+    _______, _______, _______, _______, _______,                   _______, _______, _______, _______, _______, 
+    _______, _______, _______, _______, _______,                   _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______,                   _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  )
+};
+
+// custom tap/hold keys
+uint16_t key_timer;
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+    switch(keycode) {
+        case RG_QUOT:   
+            if (record->event.pressed) {
+                key_timer = timer_read();
+                layer_on(_NUMBER);
+                register_mods(MOD_BIT(KC_RGUI));
+            } else {
+                unregister_mods(MOD_BIT(KC_RGUI));
+                layer_off(_NUMBER);
+                if (timer_elapsed(key_timer) < TAPPING_TERM) {
+                    tap_code(KC_QUOT);
+                }
+            }
+            return false; break;
+    }
+    return true;
+};

keyboards/atreus/keymaps/ridingqwerty/readme.md

@@ -0,0 +1 @@
+This is a handwired Atreus42 using a Proton C

keyboards/atreus/keymaps/ridingqwerty/rules.mk

@@ -4,9 +4,8 @@ MCU = STM32F303
 #   comment out to disable the options.
 #
 BACKLIGHT_ENABLE = no
-BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+#MOUSEKEY_ENABLE = yes # Mouse keys
-MOUSEKEY_ENABLE = yes # Mouse keys
 EXTRAKEY_ENABLE = yes # Audio control and System control
 CONSOLE_ENABLE = yes  # Console for debug
 COMMAND_ENABLE = yes    # Commands for debug and configuration
@@ -15,3 +14,4 @@ NKRO_ENABLE = yes     # USB Nkey Rollover
 AUDIO_ENABLE = yes
 RGBLIGHT_ENABLE = no
 # SERIAL_LINK_ENABLE = yes
+#TAP_DANCE_ENABLE = yes

keyboards/atreus62/atreus62.h

@@ -3,8 +3,6 @@
 
 #include "quantum.h"
 
-void promicro_bootloader_jmp(bool program);
-
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array

keyboards/c39/keymaps/kuchosauronad0/config.h

@@ -1,5 +1,10 @@
+
 /*
+This is the c configuration file for the keymap
+
 Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+Copyright 2017 Art Ortenburger
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -15,18 +20,24 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "hal.h"
+#pragma once
 
-#include "led.h"
+/* key combination for magic key command */
+#undef IS_COMMAND
+#define IS_COMMAND() ( \
+    get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT)) \
+)
 
+//#ifdef RGBLIGHT_ENABLE
+//#define RGB_DI_PIN D3
+//#define RGBLED_NUM 16     // Number of LEDs
+//#define RGBLED_SPLIT { 8, 8 }
+//
+//#define RGBLIGHT_HUE_STEP 12
+//#define RGBLIGHT_SAT_STEP 12
+//#define RGBLIGHT_VAL_STEP 12
+//#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
+//#define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
+//#define RGBLIGHT_EFFECT_BREATHE_CENTER 1
+//#endif // RGBLIGHT_ENABLE
 
-void led_set(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // output high
-        palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_OUTPUT_PUSHPULL);
-        palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13);
-    } else {
-        // Hi-Z
-        palSetPadMode(TEENSY_PIN13_IOPORT, TEENSY_PIN13, PAL_MODE_INPUT);
-    }
-}

keyboards/c39/keymaps/kuchosauronad0/keymap.c

@@ -0,0 +1,137 @@
+/*
+This is the keymap for the keyboard
+
+Copyright 2012 Jun Wako <[email protected]>
+Copyright 2015 Jack Humbert
+Copyright 2017 Art Ortenburger
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "kuchosauronad0.h"
+
+#ifdef INDICATOR_LIGHTS
+extern userspace_config_t userspace_config;
+
+uint8_t last_mod;
+uint8_t last_led;
+uint8_t last_osm;
+#endif
+
+#define LAYOUT_collide39_base( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
+  ) \
+  LAYOUT_wrapper( \
+    MT(MOD_LALT,KC_TAB),  K01,    K02,     K03,      K04,     K05,     LT(RAISE,KC_PGUP),  K06,     K07,     K08,     K09,     K0A,     KC_BSPC, \
+    SFT_T(KC_ESC),        K11,    K12,     K13,      K14,     K15,     LT(LOWER,KC_PGDN),  K16,     K17,     K18,     K19,     K1A,     SFT_T(KC_ENT), \
+    MT(MOD_LCTL,KC_DEL),  K21,    K22,     K23,      K24,     K25,     KC_SPACE,           K26,     K27,     K28,     K29,     K2A,     KC_LEAD  \
+  )
+#define LAYOUT_collide39_base_wrapper(...)       LAYOUT_collide39_base(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+            
+  [_QWERTY] = LAYOUT_collide39_base_wrapper(
+    _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+    _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+    _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+  ),
+
+  [_COLEMAK] = LAYOUT_collide39_base_wrapper(
+    _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+    _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+    _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+  ),
+
+  [_DVORAK] = LAYOUT_collide39_base_wrapper(
+    _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+    _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+    _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+  ),
+
+#ifdef UNICODEMAP_ENABLE
+  [_UNICODE] = LAYOUT_collide39_base_wrapper(
+    _______________UNICODE_L1__________________, _______________UNICODE_R1__________________,
+    _______________UNICODE_L2__________________, _______________UNICODE_R2__________________,
+    _______________UNICODE_L3__________________, _______________UNICODE_R3__________________
+  ),
+#endif
+  [_WORKMAN] = LAYOUT_collide39_base_wrapper(
+    _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
+    _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
+    _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
+  ),
+
+  [_NORMAN] = LAYOUT_collide39_base_wrapper(
+    _________________NORMAN_L1_________________, _________________NORMAN_L1_________________,
+    _________________NORMAN_L2_________________, _________________NORMAN_R2_________________,
+    _________________NORMAN_L3_________________, _________________NORMAN_R3_________________
+  ),
+
+  [_MALTRON] = LAYOUT_collide39_base_wrapper(
+    _________________MALTRON_L1________________, _________________MALTRON_R1________________,
+    _________________MALTRON_L2________________, _________________MALTRON_R2________________,
+    _________________MALTRON_L3________________, _________________MALTRON_R3________________
+  ),
+
+  [_EUCALYN] = LAYOUT_collide39_base_wrapper(
+    _________________EUCALYN_L1________________, _________________EUCALYN_R1________________,
+    _________________EUCALYN_L2________________, _________________EUCALYN_R2________________,
+    _________________EUCALYN_L3________________, _________________EUCALYN_R3________________
+  ),
+
+  [_CARPLAX] = LAYOUT_collide39_base_wrapper(
+    _____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________,
+    _____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________,
+    _____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________
+  ),
+
+
+  [_MODS] = LAYOUT_wrapper(\
+    _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______,
+    KC_LSFT, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______
+  ),
+
+  [_LOWER] = LAYOUT_wrapper(\
+    KC_TILD, _________________LOWER_L1__________________, _______,  _________________LOWER_R1__________________, KC_BSPC,
+    KC_F11,  _________________LOWER_L2__________________, _______,  _________________LOWER_R2__________________, KC_PIPE,
+    KC_F12,  _________________LOWER_L3__________________, _______,  _________________LOWER_R3__________________, _______
+  ),
+
+  [_RAISE] = LAYOUT_wrapper(\
+    KC_GRV,  _________________RAISE_L1__________________, _______,  _________________RAISE_R1__________________, KC_BSPC,
+    _______, _________________RAISE_L2__________________, _______,  _________________RAISE_R2__________________, KC_BSLS,
+    _______, _________________RAISE_L3__________________, _______,  _________________RAISE_R3__________________, _______
+  ),
+
+  [_ADJUST] = LAYOUT_wrapper(\
+    KC_MAKE, _________________ADJUST_L1_________________, _______,  _________________ADJUST_R1_________________, KC_RESET,
+    VRSN,    _________________ADJUST_L2_________________, _______,  _________________ADJUST_R2_________________, EEP_RST,
+    TG_MODS, _________________ADJUST_L3_________________, _______,  _________________ADJUST_R3_________________, KC_MPLY
+  )
+
+};
+
+void matrix_init_keymap(void) {
+  #ifndef CONVERT_TO_PROTON_C
+    setPinOutput(D5);
+    writePinHigh(D5);
+    setPinOutput(B0);
+    writePinHigh(B0);
+  #endif
+}
+

keyboards/c39/keymaps/kuchosauronad0/readme.md

@@ -0,0 +1 @@
+# Personal keymap for the collide39

keyboards/c39/keymaps/kuchosauronad0/rules.mk

@@ -0,0 +1,20 @@
+BOOTLOADER        = caterina
+BOOTMAGIC_ENABLE  = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE   = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE   = yes      # Audio control and System control(+450)
+CONSOLE_ENABLE    = no       # Console for debug(+400)
+COMMAND_ENABLE    = no       # Commands for debug and configuration
+LEADER_ENABLE     = yes      # default is yes
+TAP_DANCE_ENABLE  = no      #(+1254)
+UNICODE_ENABLE    = no       #(+1134)
+UNICODEMAP_ENABLE = yes
+RGBLIGHT_ENABLE   = no
+AUDIO_ENABLE      = no
+NKRO_ENABLE       = yes      
+
+INDICATOR_LIGHTS  = no
+MACROS_ENABLED    = no
+RGBLIGHT_TWINKLE  = no
+RGBLIGHT_STARTUP_ANIMATION = no
+
+NO_SECRETS = yes

keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c

@@ -1,49 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
-  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
-  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
-  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
-  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
-  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
-};
-#endif
-
-/*
- * Early initialization code.
- * This initialization must be performed just after stack setup and before
- * any other initialization.
- */
-void __early_init(void) {
-
-  stm32_clock_init();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-}

keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h

@@ -1,166 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for a Generic STM32F103 board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_GENERIC_STM32_F103
-#define BOARD_NAME              "Generic STM32F103x board"
-
-/*
- * Board frequencies.
- */
-#define STM32_LSECLK            32768
-#define STM32_HSECLK            8000000
-
-/*
- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
- */
-#define STM32F103xB
-
-/*
- * IO pins assignments
- */
-
-/* on-board */
-
-#define GPIOC_LED               13
-#define GPIOD_OSC_IN            0
-#define GPIOD_OSC_OUT           1
-
-/* In case your board has a "USB enable" hardware
-   controlled by a pin, define it here. (It could be just
-   a 1.5k resistor connected to D+ line.)
-*/
-/*
-#define GPIOB_USB_DISC          10
-*/
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- *
- * The digits have the following meaning:
- *   0 - Analog input.
- *   1 - Push Pull output 10MHz.
- *   2 - Push Pull output 2MHz.
- *   3 - Push Pull output 50MHz.
- *   4 - Digital input.
- *   5 - Open Drain output 10MHz.
- *   6 - Open Drain output 2MHz.
- *   7 - Open Drain output 50MHz.
- *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
- *   9 - Alternate Push Pull output 10MHz.
- *   A - Alternate Push Pull output 2MHz.
- *   B - Alternate Push Pull output 50MHz.
- *   C - Reserved.
- *   D - Alternate Open Drain output 10MHz.
- *   E - Alternate Open Drain output 2MHz.
- *   F - Alternate Open Drain output 50MHz.
- * Please refer to the STM32 Reference Manual for details.
- */
-
-/*
- * Port A setup.
- * Everything input with pull-up except:
- * PA2  - Alternate output  (USART2 TX).
- * PA3  - Normal input      (USART2 RX).
- * PA9  - Alternate output  (USART1 TX).
- * PA10 - Normal input      (USART1 RX).
- */
-#define VAL_GPIOACRL            0x88884B88      /*  PA7...PA0 */
-#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */
-#define VAL_GPIOAODR            0xFFFFFFFF
-
-/*
- * Port B setup.
- * Everything input with pull-up except:
- * PB10    - Push Pull output  (USB switch).
- */
-#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
-#define VAL_GPIOBCRH            0x88888388      /* PB15...PB8 */
-#define VAL_GPIOBODR            0xFFFFFFFF
-
-/*
- * Port C setup.
- * Everything input with pull-up except:
- * PC13    - Push Pull output  (LED).
- */
-#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
-#define VAL_GPIOCCRH            0x88388888      /* PC15...PC8 */
-#define VAL_GPIOCODR            0xFFFFFFFF
-
-/*
- * Port D setup.
- * Everything input with pull-up except:
- * PD0  - Normal input (XTAL).
- * PD1  - Normal input (XTAL).
- */
-#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
-#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
-#define VAL_GPIODODR            0xFFFFFFFF
-
-/*
- * Port E setup.
- * Everything input with pull-up except:
- */
-#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
-#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
-#define VAL_GPIOEODR            0xFFFFFFFF
-
-/*
- * USB bus activation macro, required by the USB driver.
- */
-/* The point is that most of the generic STM32F103* boards
-   have a 1.5k resistor connected on one end to the D+ line
-   and on the other end to some pin. Or even a slightly more
-   complicated "USB enable" circuit, controlled by a pin.
-   That should go here.
-
-   However on some boards (e.g. one that I have), there's no
-   such hardware. In which case it's better to not do anything.
-*/
-/*
-#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
-*/
-#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
-
-/*
- * USB bus de-activation macro, required by the USB driver.
- */
-/*
-#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
-*/
-#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */

keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F103/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F103

keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -1,111 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
-};
-#endif
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
- */
-void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
-}
-
-
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-}

keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -1,923 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * This file has been automatically generated using ChibiStudio board
- * generator plugin. Do not edit manually.
- */
-
-#ifndef BOARD_H
-#define BOARD_H
-
-/*
- * Setup for ST STM32F072B-Discovery board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_ST_STM32F072B_DISCOVERY
-#define BOARD_NAME                  "ST STM32F072B-Discovery"
-
-/*
- * Board oscillators-related settings.
- * NOTE: LSE not fitted.
- * NOTE: HSE not fitted.
- */
-#if !defined(STM32_LSECLK)
-#define STM32_LSECLK                0U
-#endif
-
-#define STM32_LSEDRV                (3U << 3U)
-
-#if !defined(STM32_HSECLK)
-#define STM32_HSECLK                0U
-#endif
-
-#define STM32_HSE_BYPASS
-
-/*
- * MCU type as defined in the ST header.
- */
-#define STM32F072xB
-
-/*
- * IO pins assignments.
- */
-#define GPIOA_BUTTON                0U
-#define GPIOA_PIN1                  1U
-#define GPIOA_PIN2                  2U
-#define GPIOA_PIN3                  3U
-#define GPIOA_PIN4                  4U
-#define GPIOA_PIN5                  5U
-#define GPIOA_PIN6                  6U
-#define GPIOA_PIN7                  7U
-#define GPIOA_PIN8                  8U
-#define GPIOA_PIN9                  9U
-#define GPIOA_PIN10                 10U
-#define GPIOA_USB_DM                11U
-#define GPIOA_USB_DP                12U
-#define GPIOA_SWDIO                 13U
-#define GPIOA_SWCLK                 14U
-#define GPIOA_PIN15                 15U
-
-#define GPIOB_PIN0                  0U
-#define GPIOB_PIN1                  1U
-#define GPIOB_PIN2                  2U
-#define GPIOB_PIN3                  3U
-#define GPIOB_PIN4                  4U
-#define GPIOB_PIN5                  5U
-#define GPIOB_PIN6                  6U
-#define GPIOB_PIN7                  7U
-#define GPIOB_PIN8                  8U
-#define GPIOB_PIN9                  9U
-#define GPIOB_PIN10                 10U
-#define GPIOB_PIN11                 11U
-#define GPIOB_PIN12                 12U
-#define GPIOB_SPI2_SCK              13U
-#define GPIOB_SPI2_MISO             14U
-#define GPIOB_SPI2_MOSI             15U
-
-#define GPIOC_MEMS_CS               0U
-#define GPIOC_PIN1                  1U
-#define GPIOC_PIN2                  2U
-#define GPIOC_PIN3                  3U
-#define GPIOC_PIN4                  4U
-#define GPIOC_PIN5                  5U
-#define GPIOC_LED_RED               6U
-#define GPIOC_LED_BLUE              7U
-#define GPIOC_LED_ORANGE            8U
-#define GPIOC_LED_GREEN             9U
-#define GPIOC_PIN10                 10U
-#define GPIOC_PIN11                 11U
-#define GPIOC_PIN12                 12U
-#define GPIOC_PIN13                 13U
-#define GPIOC_OSC32_IN              14U
-#define GPIOC_OSC32_OUT             15U
-
-#define GPIOD_PIN0                  0U
-#define GPIOD_PIN1                  1U
-#define GPIOD_PIN2                  2U
-#define GPIOD_PIN3                  3U
-#define GPIOD_PIN4                  4U
-#define GPIOD_PIN5                  5U
-#define GPIOD_PIN6                  6U
-#define GPIOD_PIN7                  7U
-#define GPIOD_PIN8                  8U
-#define GPIOD_PIN9                  9U
-#define GPIOD_PIN10                 10U
-#define GPIOD_PIN11                 11U
-#define GPIOD_PIN12                 12U
-#define GPIOD_PIN13                 13U
-#define GPIOD_PIN14                 14U
-#define GPIOD_PIN15                 15U
-
-#define GPIOE_PIN0                  0U
-#define GPIOE_PIN1                  1U
-#define GPIOE_PIN2                  2U
-#define GPIOE_PIN3                  3U
-#define GPIOE_PIN4                  4U
-#define GPIOE_PIN5                  5U
-#define GPIOE_PIN6                  6U
-#define GPIOE_PIN7                  7U
-#define GPIOE_PIN8                  8U
-#define GPIOE_PIN9                  9U
-#define GPIOE_PIN10                 10U
-#define GPIOE_PIN11                 11U
-#define GPIOE_PIN12                 12U
-#define GPIOE_PIN13                 13U
-#define GPIOE_PIN14                 14U
-#define GPIOE_PIN15                 15U
-
-#define GPIOF_OSC_IN                0U
-#define GPIOF_OSC_OUT               1U
-#define GPIOF_PIN2                  2U
-#define GPIOF_PIN3                  3U
-#define GPIOF_PIN4                  4U
-#define GPIOF_PIN5                  5U
-#define GPIOF_PIN6                  6U
-#define GPIOF_PIN7                  7U
-#define GPIOF_PIN8                  8U
-#define GPIOF_PIN9                  9U
-#define GPIOF_PIN10                 10U
-#define GPIOF_PIN11                 11U
-#define GPIOF_PIN12                 12U
-#define GPIOF_PIN13                 13U
-#define GPIOF_PIN14                 14U
-#define GPIOF_PIN15                 15U
-
-/*
- * IO lines assignments.
- */
-#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
-#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
-#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
-
-#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
-#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
-#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
-
-#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
-#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
-#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
-#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
-#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
-#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
-#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
-
-
-
-#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
-#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
-
-/*
- * I/O ports initial setup, this configuration is established soon after reset
- * in the initialization code.
- * Please refer to the STM32 Reference Manual for details.
- */
-#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
-#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
-#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
-#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
-#define PIN_ODR_LOW(n)              (0U << (n))
-#define PIN_ODR_HIGH(n)             (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
-#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
-#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
-#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
-#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
-#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
-#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
-#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
-#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
-
-/*
- * GPIOA setup:
- *
- * PA0  - BUTTON                    (input floating).
- * PA1  - PIN1                      (input pullup).
- * PA2  - PIN2                      (input pullup).
- * PA3  - PIN3                      (input pullup).
- * PA4  - PIN4                      (input pullup).
- * PA5  - PIN5                      (input pullup).
- * PA6  - PIN6                      (input pullup).
- * PA7  - PIN7                      (input pullup).
- * PA8  - PIN8                      (input pullup).
- * PA9  - PIN9                      (input pullup).
- * PA10 - PIN10                     (input pullup).
- * PA11 - USB_DM                    (input floating).
- * PA12 - USB_DP                    (input floating).
- * PA13 - SWDIO                     (alternate 0).
- * PA14 - SWCLK                     (alternate 0).
- * PA15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
-                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
-                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
-                                     PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
-                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
-                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
-                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
-                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
-                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
-                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
-                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
-                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
-                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
-                                     PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
-#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
-                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
-                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
-
-/*
- * GPIOB setup:
- *
- * PB0  - PIN0                      (input pullup).
- * PB1  - PIN1                      (input pullup).
- * PB2  - PIN2                      (input pullup).
- * PB3  - PIN3                      (input pullup).
- * PB4  - PIN4                      (input pullup).
- * PB5  - PIN5                      (input pullup).
- * PB6  - PIN6                      (input pullup).
- * PB7  - PIN7                      (input pullup).
- * PB8  - PIN8                      (input pullup).
- * PB9  - PIN9                      (input pullup).
- * PB10 - PIN10                     (input pullup).
- * PB11 - PIN11                     (input pullup).
- * PB12 - PIN12                     (input pullup).
- * PB13 - SPI2_SCK                  (alternate 0).
- * PB14 - SPI2_MISO                 (alternate 0).
- * PB15 - SPI2_MOSI                 (alternate 0).
- */
-#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
-                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
-                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
-                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
-                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
-#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
-#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
-                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
-                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
-
-/*
- * GPIOC setup:
- *
- * PC0  - MEMS_CS                   (output pushpull maximum).
- * PC1  - PIN1                      (input pullup).
- * PC2  - PIN2                      (input pullup).
- * PC3  - PIN3                      (input pullup).
- * PC4  - PIN4                      (input pullup).
- * PC5  - PIN5                      (input pullup).
- * PC6  - LED_RED                   (output pushpull maximum).
- * PC7  - LED_BLUE                  (output pushpull maximum).
- * PC8  - LED_ORANGE                (output pushpull maximum).
- * PC9  - LED_GREEN                 (output pushpull maximum).
- * PC10 - PIN10                     (input pullup).
- * PC11 - PIN11                     (input pullup).
- * PC12 - PIN12                     (input pullup).
- * PC13 - PIN13                     (input pullup).
- * PC14 - OSC32_IN                  (input floating).
- * PC15 - OSC32_OUT                 (input floating).
- */
-#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
-                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
-                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
-                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
-                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
-                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
-                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
-                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
-                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
-                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
-                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
-                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
-                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
-                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
-                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
-                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
-                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
-                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
-#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
-                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
-                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
-                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
-
-/*
- * GPIOD setup:
- *
- * PD0  - PIN0                      (input pullup).
- * PD1  - PIN1                      (input pullup).
- * PD2  - PIN2                      (input pullup).
- * PD3  - PIN3                      (input pullup).
- * PD4  - PIN4                      (input pullup).
- * PD5  - PIN5                      (input pullup).
- * PD6  - PIN6                      (input pullup).
- * PD7  - PIN7                      (input pullup).
- * PD8  - PIN8                      (input pullup).
- * PD9  - PIN9                      (input pullup).
- * PD10 - PIN10                     (input pullup).
- * PD11 - PIN11                     (input pullup).
- * PD12 - PIN12                     (input pullup).
- * PD13 - PIN13                     (input pullup).
- * PD14 - PIN14                     (input pullup).
- * PD15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
-#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
-
-/*
- * GPIOE setup:
- *
- * PE0  - PIN0                      (input pullup).
- * PE1  - PIN1                      (input pullup).
- * PE2  - PIN2                      (input pullup).
- * PE3  - PIN3                      (input pullup).
- * PE4  - PIN4                      (input pullup).
- * PE5  - PIN5                      (input pullup).
- * PE6  - PIN6                      (input pullup).
- * PE7  - PIN7                      (input pullup).
- * PE8  - PIN8                      (input pullup).
- * PE9  - PIN9                      (input pullup).
- * PE10 - PIN10                     (input pullup).
- * PE11 - PIN11                     (input pullup).
- * PE12 - PIN12                     (input pullup).
- * PE13 - PIN13                     (input pullup).
- * PE14 - PIN14                     (input pullup).
- * PE15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
-#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
-#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
-
-/*
- * GPIOF setup:
- *
- * PF0  - OSC_IN                    (input floating).
- * PF1  - OSC_OUT                   (input floating).
- * PF2  - PIN2                      (input pullup).
- * PF3  - PIN3                      (input pullup).
- * PF4  - PIN4                      (input pullup).
- * PF5  - PIN5                      (input pullup).
- * PF6  - PIN6                      (input pullup).
- * PF7  - PIN7                      (input pullup).
- * PF8  - PIN8                      (input pullup).
- * PF9  - PIN9                      (input pullup).
- * PF10 - PIN10                     (input pullup).
- * PF11 - PIN11                     (input pullup).
- * PF12 - PIN12                     (input pullup).
- * PF13 - PIN13                     (input pullup).
- * PF14 - PIN14                     (input pullup).
- * PF15 - PIN15                     (input pullup).
- */
-#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
-                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
-                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
-                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
-                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
-                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
-                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
-                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
-#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
-                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
-
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* BOARD_H */

keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/chibios_test/chibios_test.c

@@ -1 +0,0 @@
-#include "chibios_test.h"

keyboards/chibios_test/chibios_test.h

@@ -1,8 +0,0 @@
-#ifndef KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_
-#define KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_
-
-#include "quantum.h"
-
-#define LAYOUT(k00) {{ k00 }}
-
-#endif /* KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ */

keyboards/chibios_test/config.h

@@ -1,65 +0,0 @@
-/*
-Copyright 2015 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6464
-#define DEVICE_VER      0x0001
-/* in python2: list(u"whatever".encode('utf-16-le')) */
-/*   at most 32 characters or the ugly hack in usb_main.c borks */
-#define MANUFACTURER QMK
-#define PRODUCT ChibiOS QMK test
-#define DESCRIPTION QMK keyboard firmware test for ChibiOS
-
-/* key matrix size */
-#define MATRIX_ROWS 1
-#define MATRIX_COLS 1
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif

keyboards/chibios_test/ld/MKL26Z64.ld

@@ -1,105 +0,0 @@
-/*
- * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
- *           (C) 2016 flabbergast <[email protected]>
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-/*
- * KL26Z64 memory setup.
- */
-MEMORY
-{
-  flash0   : org = 0x00000000, len = 0x100
-  flash1   : org = 0x00000400, len = 0x10
-  flash2   : org = 0x00000410, len = 62k - 0x410
-  flash3   : org = 0x0000F800, len = 2k
-  flash4   : org = 0x00000000, len = 0
-  flash5   : org = 0x00000000, len = 0
-  flash6   : org = 0x00000000, len = 0
-  flash7   : org = 0x00000000, len = 0
-  ram0     : org = 0x1FFFF800, len = 8k
-  ram1     : org = 0x00000000, len = 0
-  ram2     : org = 0x00000000, len = 0
-  ram3     : org = 0x00000000, len = 0
-  ram4     : org = 0x00000000, len = 0
-  ram5     : org = 0x00000000, len = 0
-  ram6     : org = 0x00000000, len = 0
-  ram7     : org = 0x00000000, len = 0
-}
-
-/* Flash region for the configuration bytes.*/
-SECTIONS
-{
-  .cfmprotect : ALIGN(4) SUBALIGN(4)
-  {
-    KEEP(*(.cfmconfig))
-  } > flash1
-}
-
-/* For each data/text section two region are defined, a virtual region
-   and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash2);
-REGION_ALIAS("XTORS_FLASH_LMA", flash2);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash2);
-REGION_ALIAS("TEXT_FLASH_LMA", flash2);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash2);
-REGION_ALIAS("RODATA_FLASH_LMA", flash2);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash2);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
-   of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
-   the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash2);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-__eeprom_workarea_start__ = ORIGIN(flash3);
-__eeprom_workarea_size__  = LENGTH(flash3);
-__eeprom_workarea_end__   = __eeprom_workarea_start__ + __eeprom_workarea_size__;
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld

keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld

@@ -1,88 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/*
- * ST32F103xB memory setup for use with the maplemini bootloader.
- * You will have to
- * 	#define CORTEX_VTOR_INIT 0x5000
- * in your projects chconf.h
- */
-MEMORY
-{
-    flash0  : org = 0x08002000, len = 128k - 0x2000
-    flash1  : org = 0x00000000, len = 0
-    flash2  : org = 0x00000000, len = 0
-    flash3  : org = 0x00000000, len = 0
-    flash4  : org = 0x00000000, len = 0
-    flash5  : org = 0x00000000, len = 0
-    flash6  : org = 0x00000000, len = 0
-    flash7  : org = 0x00000000, len = 0
-    ram0    : org = 0x20000000, len = 20k
-    ram1    : org = 0x00000000, len = 0
-    ram2    : org = 0x00000000, len = 0
-    ram3    : org = 0x00000000, len = 0
-    ram4    : org = 0x00000000, len = 0
-    ram5    : org = 0x00000000, len = 0
-    ram6    : org = 0x00000000, len = 0
-    ram7    : org = 0x00000000, len = 0
-}
-
-/* For each data/text section two region are defined, a virtual region
-   and a load region (_LMA suffix).*/
-
-/* Flash region to be used for exception vectors.*/
-REGION_ALIAS("VECTORS_FLASH", flash0);
-REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for constructors and destructors.*/
-REGION_ALIAS("XTORS_FLASH", flash0);
-REGION_ALIAS("XTORS_FLASH_LMA", flash0);
-
-/* Flash region to be used for code text.*/
-REGION_ALIAS("TEXT_FLASH", flash0);
-REGION_ALIAS("TEXT_FLASH_LMA", flash0);
-
-/* Flash region to be used for read only data.*/
-REGION_ALIAS("RODATA_FLASH", flash0);
-REGION_ALIAS("RODATA_FLASH_LMA", flash0);
-
-/* Flash region to be used for various.*/
-REGION_ALIAS("VARIOUS_FLASH", flash0);
-REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
-
-/* Flash region to be used for RAM(n) initialization data.*/
-REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
-
-/* RAM region to be used for Main stack. This stack accommodates the processing
-   of all exceptions and interrupts.*/
-REGION_ALIAS("MAIN_STACK_RAM", ram0);
-
-/* RAM region to be used for the process stack. This is the stack used by
-   the main() function.*/
-REGION_ALIAS("PROCESS_STACK_RAM", ram0);
-
-/* RAM region to be used for data segment.*/
-REGION_ALIAS("DATA_RAM", ram0);
-REGION_ALIAS("DATA_RAM_LMA", flash0);
-
-/* RAM region to be used for BSS segment.*/
-REGION_ALIAS("BSS_RAM", ram0);
-
-/* RAM region to be used for the default heap.*/
-REGION_ALIAS("HEAP_RAM", ram0);
-
-/* Generic rules inclusion.*/
-INCLUDE rules.ld

keyboards/chibios_test/readme.md

@@ -1,3 +0,0 @@
-# ChibiOS Test Keyboards
-
-Test code for several ARM based ChibiOS boards

keyboards/chibios_test/rules.mk

@@ -1,10 +0,0 @@
-#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	    # USB Nkey Rollover
-CUSTOM_MATRIX = yes # Custom matrix file
-
-DEFAULT_FOLDER = chibios_test/stm32_f072_onekey

keyboards/chibios_test/stm32_f072_onekey/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/chibios_test/stm32_f072_onekey/config.h

@@ -1,7 +0,0 @@
-#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_
-#define KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_
-
-#include "../config.h"
-
-
-#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ */

keyboards/chibios_test/stm32_f072_onekey/matrix.c

@@ -1,163 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/*
- * scan matrix
- */
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "wait.h"
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE 5
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-#define LED_ON()    do { palSetPad(GPIOC, GPIOC_LED_BLUE) ;} while (0)
-#define LED_OFF()   do { palClearPad(GPIOC, GPIOC_LED_BLUE); } while (0)
-#define LED_TGL()   do { palTogglePad(GPIOC, GPIOC_LED_BLUE); } while (0)
-
-void matrix_init(void)
-{
-    // initialize row and col
-    unselect_rows();
-    init_cols();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-
-    //debug
-    debug_matrix = true;
-    LED_ON();
-    wait_ms(500);
-    LED_OFF();
-}
-
-uint8_t matrix_scan(void)
-{
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        select_row(i);
-        wait_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i] != cols) {
-            matrix_debouncing[i] = cols;
-            if (debouncing) {
-                debug("bounce!: "); debug_hex(debouncing); debug("\n");
-            }
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            wait_ms(1);
-        } else {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-        }
-    }
-
-    return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-/* Column pin configuration
- */
-static void  init_cols(void)
-{
-    // don't need pullup/down, since it's pulled down in hardware
-    palSetPadMode(GPIOA, GPIOA_BUTTON, PAL_MODE_INPUT);
-}
-
-/* Returns status of switches(1:on, 0:off) */
-static matrix_row_t read_cols(void)
-{
-    return ((palReadPad(GPIOA, GPIOA_BUTTON)==PAL_LOW) ? 0 : (1<<0));
-    // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
-}
-
-/* Row pin configuration
- */
-static void unselect_rows(void)
-{
-    // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_INPUT); // hi-Z
-}
-
-static void select_row(uint8_t row)
-{
-    (void)row;
-    // Output low to select
-    // switch (row) {
-    //     case 0:
-    //         palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_OUTPUT_PUSHPULL);
-    //         palSetPad(GPIOA, GPIOA_PIN10, PAL_LOW);
-    //         break;
-    // }
-}

keyboards/chibios_test/stm32_f072_onekey/readme.md

@@ -1,3 +0,0 @@
-# ChibiOS Test
-
-Test code for the stm32_f072 one key keyboard

keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.c

@@ -1 +0,0 @@
-#include "stm32_f072_onekey.h"

keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h

@@ -1,7 +0,0 @@
-#ifndef STM32_F072_ONEKEY_H
-#define STM32_F072_ONEKEY_H
-#include "chibios_test.h"
-
-#define LAYOUT(k00) {{ k00 }}
-
-#endif

keyboards/chibios_test/stm32_f103_onekey/bootloader_defs.h

@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-// #define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

keyboards/chibios_test/stm32_f103_onekey/config.h

@@ -1,6 +0,0 @@
-#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_
-#define KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_
-
-#include "../config.h"
-
-#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ */

keyboards/chibios_test/stm32_f103_onekey/flash.sh

@@ -1,2 +0,0 @@
-#!/bin/bash
-Arduino_STM32_usb_hid/tools/linux/maple_upload ttyACM0 2 1EAF:0003 build/ch.bin

keyboards/chibios_test/stm32_f103_onekey/halconf.h

@@ -1,353 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                 TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                 FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                 FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT                 FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                 FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                 FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                 FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                 FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI             FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 FALSE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                 FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL              FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB          FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                 FALSE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                 TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                 FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE          TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY           FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS              TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY              100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT             FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING            TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE      38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE         16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 64 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE     1
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                TRUE
-#endif
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION    TRUE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */

keyboards/chibios_test/stm32_f103_onekey/led.c

@@ -1,43 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "hal.h"
-#include "led.h"
-
-
-void led_set(uint8_t usb_led)
-{
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-    	/* generic STM32F103C8T6 board */
-#ifdef BOARD_GENERIC_STM32_F103
-        palClearPad(GPIOC, 13);
-#endif
-        /* Maple Mini */
-#ifdef BOARD_MAPLEMINI_STM32_F103
-        palSetPad(GPIOB, 1);
-#endif
-    } else {
-    	/* generic STM32F103C8T6 board */
-#ifdef BOARD_GENERIC_STM32_F103
-    	palSetPad(GPIOC, 13);
-#endif
-        /* Maple Mini */
-#ifdef BOARD_MAPLEMINI_STM32_F103
-        palClearPad(GPIOB,1);
-#endif
-    }
-}

keyboards/chibios_test/stm32_f103_onekey/matrix.c

@@ -1,177 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/*
- * scan matrix
- */
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "wait.h"
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE 5
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-/* generic STM32F103C8T6 board */
-#ifdef BOARD_GENERIC_STM32_F103
-#define LED_ON()    do { palClearPad(GPIOC, GPIOC_LED) ;} while (0)
-#define LED_OFF()   do { palSetPad(GPIOC, GPIOC_LED); } while (0)
-#define LED_TGL()   do { palTogglePad(GPIOC, GPIOC_LED); } while (0)
-#endif
-
-/* Maple Mini */
-#ifdef BOARD_MAPLEMINI_STM32_F103
-#define LED_ON()    do { palSetPad(GPIOB, 1) ;} while (0)
-#define LED_OFF()   do { palClearPad(GPIOB, 1); } while (0)
-#define LED_TGL()   do { palTogglePad(GPIOB, 1); } while (0)
-#endif
-
-void matrix_init(void)
-{
-    // initialize row and col
-    unselect_rows();
-    init_cols();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-
-    //debug
-    debug_matrix = true;
-    LED_ON();
-    wait_ms(500);
-    LED_OFF();
-}
-
-uint8_t matrix_scan(void)
-{
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        select_row(i);
-        wait_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i] != cols) {
-            matrix_debouncing[i] = cols;
-            if (debouncing) {
-                debug("bounce!: "); debug_hex(debouncing); debug("\n");
-            }
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            wait_ms(1);
-        } else {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-        }
-    }
-
-    return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-/* Column pin configuration
- */
-static void  init_cols(void)
-{
-#ifdef BOARD_MAPLEMINI_STM32_F103
-    // don't need pullup/down, since it's pulled down in hardware
-    palSetPadMode(GPIOB, 8, PAL_MODE_INPUT);
-#else
-    palSetPadMode(GPIOB, 8, PAL_MODE_INPUT_PULLDOWN);
-#endif
-}
-
-/* Returns status of switches(1:on, 0:off) */
-static matrix_row_t read_cols(void)
-{
-    return ((palReadPad(GPIOB, 8)==PAL_LOW) ? 0 : (1<<0));
-    // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
-}
-
-/* Row pin configuration
- */
-static void unselect_rows(void)
-{
-    // palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_INPUT); // hi-Z
-}
-
-static void select_row(uint8_t row)
-{
-    (void)row;
-    // Output low to select
-    // switch (row) {
-    //     case 0:
-    //         palSetPadMode(GPIOA, GPIOA_PIN10, PAL_MODE_OUTPUT_PUSHPULL);
-    //         palSetPad(GPIOA, GPIOA_PIN10, PAL_LOW);
-    //         break;
-    // }
-}

keyboards/chibios_test/stm32_f103_onekey/readme.md

@@ -1,3 +0,0 @@
-# ChibiOS Test
-
-Test code for the stm32_f103 one key keyboard

keyboards/chibios_test/stm32_f103_onekey/rules.mk

@@ -1,47 +0,0 @@
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = GENERIC_STM32_F103
-
-# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-# MAPLE MINI
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
-# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
-# BOARD = MAPLEMINI_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800

keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.c

@@ -1 +0,0 @@
-#include "stm32_f103_onekey.h"

keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h

@@ -1,7 +0,0 @@
-#ifndef STM32_F103_ONEKEY_H
-#define STM32_F103_ONEKEY_H
-#include "chibios_test.h"
-
-#define LAYOUT(k00) {{ k00 }}
-
-#endif

keyboards/chibios_test/teensy_lc_onekey/chconf.h

@@ -1,524 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION                32
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY                 1000
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#define CH_CFG_ST_TIMEDELTA                 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM                 20
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE                 0
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE              TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_TM                       FALSE
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY                 TRUE
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT                 TRUE
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES               TRUE
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES                  TRUE
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS                 TRUE
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS                   TRUE
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES                 TRUE
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES                TRUE
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE                  TRUE
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP                     TRUE
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS                 TRUE
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC                  TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS                   FALSE
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS                TRUE
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS               TRUE
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK           TRUE
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS                 TRUE
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING            FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note    It is invoked from within @p chThdInit() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */

keyboards/chibios_test/teensy_lc_onekey/config.h

@@ -1,6 +0,0 @@
-#ifndef KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_
-#define KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_
-
-#include "../config.h"
-
-#endif /* KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ */

keyboards/chibios_test/teensy_lc_onekey/instructions.md

@@ -1,97 +0,0 @@
-# Teensy LC, 3.0, 3.1, 3.2 support
-
-These ARM Teensies are now supported through [ChibiOS](http://chibios.org).
-
-## Installing the ARM toolchain
-
-You'll need to install an ARM toolchain, there is now a nice documentation about the two AVR/ARM toolchain : https://docs.qmk.fm/getting_started_build_tools.html and you can just run `sudo util/install_dependencies.sh`.
-This toolchain is used instead of `avr-gcc`, which is only for AVR chips. Naturally you'll also need the usual development tools (e.g. `make`), just as in the AVR setting.
-
-You can find others way with the [gcc ARM embedded](https://launchpad.net/gcc-arm-embedded) website, or using your favourite package manager. After installing, you should be able to run `arm-none-eabi-gcc -v` in the command prompt and get sensible output.
-
-## Installing ChibiOS
-
-Next, you'll need ChibiOS. For Teensies, you'll need code from two repositories: [chibios-main](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS).
-
-### If you’re using git
-
-Run `git submodule sync --recursive && git submodule update --init --recursive`. This will install ChibiOS and ChibiOS-Contrib in the `/lib/` directory.
-
-### If you’re not using Git
-
-If you're not using git, you can just download a [zip of chibios from here](https://github.com/ChibiOS/ChibiOS/archive/a7df9a891067621e8e1a5c2a2c0ceada82403afe.zip), unpack the zip, and rename/move the unpacked directory (named `ChibiOS-<long_hash_here>`) to `lib/chibios/chibios` (so that the file `lib/chibios/chibios/license.txt` exists). Now the same procedure with a [zip of chibios-contrib from here](https://github.com/ChibiOS/ChibiOS-Contrib/archive/e1311c4db6cd366cf760673f769e925741ac0ad3.zip): unpack and move `ChibiOS-Contrib-<long_hash_here>` to `lib/chibios/chibios-contrib`.
-
-(If you're using git, you can just clone the two repos: [chibios](https://github.com/ChibiOS/ChibiOS) and [chibios-contrib](https://github.com/ChibiOS/ChibiOS-Contrib). However - be warned that things may be somewhat out-of-sync (updates at different rates), so you may need to hunt a bit for the right commits.)
-
-(Why do we need chibios-contrib? Well, the main repo focuses on STM32 chips, and Freescale/NXP Kinetis chips are supported via the Contrib repository.)
-
-This should be it. Running `make` in `keyboard/teensy_lc_onekey` should create a working firmware in `build/`, called `ch.hex`.
-
-For more notes about the ChibiOS backend in TMK, see `tmk_core/protocol/chibios/README.md`.
-
-## About this onekey example
-
-It's set up for Teensy LC. To use 3.x, you'll need to edit the `Makefile` (and comment out one line in `mcuconf.h`). A sample makefile for Teensy 3.0 is provided as `Makefile.3.0`, can be used without renaming with `make -f Makefile.3.0`. Similarly for Teensy 3.2, there's `Makefile.3.2`.
-
-## Credits
-
-TMK itself is written by hasu, original sources [here](https://github.com/tmk/tmk_keyboard).
-
-The USB support for Kinetis MCUs is due to RedoX. His ChibiOS fork is also [on github](https://github.com/RedoXyde/ChibiOS); but it doesn't include Teensy LC definitions.
-
-## Features that are not implemented yet
-
-Currently only the more fancy suspend features are not there (power saving during suspend). The rest should work fine (reports either way are welcome).
-
-# Matrix programming notes
-
-The notes below explain what commands can be used to examine and set the status of Teensy pins.
-
-## ChibiOS pin manipulation basics
-
-### Pins
-
-Each pin sits on a "port", each of which comprises at most 32 individual pins.
-So for instance "PTC5" from Kinetis manual/datasheet refers to port C (or GPIOA), pin 5. Most functions dealing with pins take 2 parameters which specify the pin -- the first being the port, the second being the pin number.
-
-Within ChibiOS, there are definitions which simplify this a bit for the Teensies. `TEENSY_PINn_IOPORT` represents the port of the MCU's pin connected Teensy's PIN `n`, and `TEENSY_PINn` represents its MCU's pin number.
-
-### Mode
-
-A MCU pin can be in several modes. The basic command to set a pin mode is
-
-        palSetPadMode(TEENSY_PINn_IOPORT, TEENSY_PINn, PAL_MODE_INPUT_PULLUP);
-
-The last parameter is the mode. For keyboards, the usual ones that are used are `PAL_MODE_INPUT_PULLUP` (input with a pullup), `PAL_MODE_INPUT_PULLDOWN` (input with a pulldown), `PAL_MODE_INPUT` (input floating, a.k.a. Hi-Z), `PAL_MODE_OUTPUT_PUSHPULL` (output in the Arduino sense -- can be then set HIGH or LOW).
-
-### Setting
-
-Pins are set HIGH (after they've been put into `OUTPUT_PUSHPULL` mode) by
-
-        palSetPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
-
-or set LOW by
-
-        palClearPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
-
-Toggling can be done with
-
-        palTogglePad(TEENSY_PINn_IOPORT, TEENSY_PINn);
-
-Alternatively, you can use
-
-        palWritePad(TEENSY_PINn_IOPORT, TEENSY_PINn, bit);
-
-where `bit` is either `PAL_LOW` or `PAL_HIGH` (i.e. `0` or `1`).
-
-### Reading
-
-Reading pin status is done with
-
-        palReadPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
-
-The function returns either `PAL_HIGH` (actually `1`) or `PAL_LOW` (actually `0`).
-
-### Further docs
-
-All the commands that are available for pin manipulation through ChibiOS HAL are documented in [ChibiOS PAL driver docs](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html).

keyboards/chibios_test/teensy_lc_onekey/matrix.c

@@ -1,163 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/*
- * scan matrix
- */
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "wait.h"
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE 5
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-#define LED_ON()    do { palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13) ;} while (0)
-#define LED_OFF()   do { palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0)
-#define LED_TGL()   do { palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); } while (0)
-
-void matrix_init(void)
-{
-    // initialize row and col
-    unselect_rows();
-    init_cols();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-
-    //debug
-    debug_matrix = true;
-    LED_ON();
-    wait_ms(500);
-    LED_OFF();
-}
-
-uint8_t matrix_scan(void)
-{
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        select_row(i);
-        wait_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i] != cols) {
-            matrix_debouncing[i] = cols;
-            if (debouncing) {
-                debug("bounce!: "); debug_hex(debouncing); debug("\n");
-            }
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            wait_ms(1);
-        } else {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-        }
-    }
-
-    return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-/* Column pin configuration
- */
-static void  init_cols(void)
-{
-    // internal pull-up
-    palSetPadMode(TEENSY_PIN2_IOPORT, TEENSY_PIN2, PAL_MODE_INPUT_PULLUP);
-}
-
-/* Returns status of switches(1:on, 0:off) */
-static matrix_row_t read_cols(void)
-{
-    return ((palReadPad(TEENSY_PIN2_IOPORT, TEENSY_PIN2)==PAL_HIGH) ? 0 : (1<<0));
-    // | ((palReadPad(...)==PAL_HIGH) ? 0 : (1<<1))
-}
-
-/* Row pin configuration
- */
-static void unselect_rows(void)
-{
-    palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_INPUT); // hi-Z
-}
-
-static void select_row(uint8_t row)
-{
-    (void)row;
-    // Output low to select
-    switch (row) {
-        case 0:
-            palSetPadMode(TEENSY_PIN5_IOPORT, TEENSY_PIN5, PAL_MODE_OUTPUT_PUSHPULL);
-            palClearPad(TEENSY_PIN5_IOPORT, TEENSY_PIN5);
-            break;
-    }
-}

keyboards/chibios_test/teensy_lc_onekey/mcuconf.h

@@ -1,55 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef _MCUCONF_H_
-#define _MCUCONF_H_
-
-#define KL2x_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#if 1
-/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
-#define KINETIS_PLLCLK_FREQUENCY    96000000UL
-#define KINETIS_SYSCLK_FREQUENCY    48000000UL
-#endif
-
-#if 0
-/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
-#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
-#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
-#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
-#define KINETIS_CLKDIV1_OUTDIV1     1           /* do not divide system clock */
-#endif
-
-/*
- * SERIAL driver system settings.
- */
-#define KINETIS_SERIAL_USE_UART0              TRUE
-
-/*
- * USB driver settings
- */
-#define KINETIS_USB_USE_USB0                  TRUE
-/* Need to redefine this, since the default is for K20x */
-/* This is for Teensy LC; you should comment it out (or change to 5)
- * for Teensy 3.x */
-#define KINETIS_USB_USB0_IRQ_PRIORITY         2
-
-#endif /* _MCUCONF_H_ */

keyboards/chibios_test/teensy_lc_onekey/readme.md

@@ -1,3 +0,0 @@
-# ChibiOS Test
-
-Test code for the teensy lc one key keyboard

keyboards/chibios_test/teensy_lc_onekey/rules.mk

@@ -1,45 +0,0 @@
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = KL2x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MKL26Z64
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = kl2x
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_LC
-
-# Cortex version
-# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
-MCU  = cortex-m0plus
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 6

keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c

@@ -1 +0,0 @@
-#include "teensy_lc_onekey.h"

keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h

@@ -1,7 +0,0 @@
-#ifndef TEENSY_LC_ONEKEY_H
-#define TEENSY_LC_ONEKEY_H
-#include "chibios_test.h"
-
-#define LAYOUT(k00) {{ k00 }}
-
-#endif

keyboards/claw44/rev1/rev1.h

@@ -2,7 +2,6 @@
 
 #include "../claw44.h"
 
-//void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
 #ifdef RGBLIGHT_ENABLE
@@ -18,7 +17,6 @@
 #endif
 #endif
 
-//void promicro_bootloader_jmp(bool program);
 #define LAYOUT( \
   L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
   L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \

keyboards/clueboard/17/17.c

@@ -6,10 +6,6 @@ void matrix_init_kb(void) {
     // put your keyboard start-up code here
     // runs once when the firmware starts up
     matrix_init_user();
-
-    // JTAG disable for PORT F. write JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
 };
 
 void led_set_kb(uint8_t usb_led) {

keyboards/clueboard/66/rev2/rev2.c

@@ -8,10 +8,6 @@ void matrix_init_kb(void) {
 	// runs once when the firmware starts up
 	matrix_init_user();
 	led_init_ports();
-
-    // JTAG disable for PORT F. write JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
 }
 
 

keyboards/clueboard/66_hotswap/gen1/gen1.c

@@ -14,15 +14,10 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "gen1.h"
-#include "is31fl3731-simple.h"
-
-void matrix_init_kb(void) {
-}
-
-void matrix_scan_kb(void) {
-}
 
 #ifdef LED_MATRIX_ENABLE
+    #include "is31fl3731-simple.h"
+
 const is31_led g_is31_leds[LED_DRIVER_LED_COUNT] = {
 /* Refer to IS31 manual for these locations
  *  driver

keyboards/clueboard/66_hotswap/prototype/prototype.c

@@ -8,10 +8,6 @@ void matrix_init_kb(void) {
 	// runs once when the firmware starts up
 	matrix_init_user();
 	led_init_ports();
-
-    // JTAG disable for PORT F. write JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
 }
 
 

keyboards/crkbd/rev1/rev1.h

@@ -2,7 +2,6 @@
 
 #include "crkbd.h"
 
-// void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
 #ifdef PROTOCOL_LUFA
@@ -23,7 +22,6 @@
 #endif
 
 // clang-format off
-//void promicro_bootloader_jmp(bool program);
 #define LAYOUT( \
   L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
   L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \

keyboards/deltasplit75/v2/v2.h

@@ -3,10 +3,8 @@
 
 #include "deltasplit75.h"
 
-//void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
-//void promicro_bootloader_jmp(bool program);
 //matrix is defined in a weird way here; the layout on both sides are asymmetrical, but the "matrix" is symmetrical but with empty gaps
 //the last column is defined as a separate row because the firmware currently doesnt support more than 8 columns (this layout has 9 columns per side) K45 and K110 are the Bs on both sides; K53 and K106 are extra keys for ISO
 #define LAYOUT_v2( \
@@ -59,4 +57,4 @@
 		{ KC_NO, KC_NO, K132,  K133,  K134,  K135,  K136,  K137} \
 	}
 
-#endif
+#endif

keyboards/divergetm2/divergetm2.h

@@ -17,10 +17,8 @@
 
 #pragma once
 
-//void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
-
 #ifdef USE_I2C
 #include <stddef.h>
 #ifdef __AVR__
@@ -29,8 +27,6 @@
 #endif
 #endif
 
-//void promicro_bootloader_jmp(bool program);
-
 #ifndef FLIP_HALF
 // Standard Keymap
 // (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)

keyboards/dumbpad/config.h

@@ -51,6 +51,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ENCODERS_PAD_A { D0 }
 #define ENCODERS_PAD_B { D4 }
 
+/* LED layer indicators */
+#define LAYER_INDICATOR_LED_0 B3
+#define LAYER_INDICATOR_LED_1 B1
+
 /* Bootmagic - hold down rotary encoder pushbutton while plugging in to enter bootloader */
 #define BOOTMAGIC_LITE_ROW 3
 #define BOOTMAGIC_LITE_COLUMN 0

keyboards/dumbpad/dumbpad.c

@@ -15,15 +15,49 @@
  */
 #include "dumbpad.h"
 
+void keyboard_pre_init_kb(void) {
+  // Set the layer LED IO as outputs
+  setPinOutput(LAYER_INDICATOR_LED_0);
+  setPinOutput(LAYER_INDICATOR_LED_1);
+  
+  keyboard_pre_init_user();
+}
+
+void shutdown_user() {
+  // Shutdown the layer LEDs
+  writePinLow(LAYER_INDICATOR_LED_0);
+  writePinLow(LAYER_INDICATOR_LED_1);
+}
+
+layer_state_t layer_state_set_kb(layer_state_t state) {
+  // Layer LEDs act as binary indication of current layer
+  uint8_t layer = biton32(state);
+  writePin(LAYER_INDICATOR_LED_0, layer & 0b1);
+  writePin(LAYER_INDICATOR_LED_1, (layer >> 1) & 0b1);
+  return layer_state_set_user(state);
+}
+
 // Optional override functions below.
 // You can leave any or all of these undefined.
 // These are only required if you want to perform custom actions.
 
-/*
-
 void matrix_init_kb(void) {
   // put your keyboard start-up code here
   // runs once when the firmware starts up
+  for (int i = 0; i < 2; i++) {
+    writePin(LAYER_INDICATOR_LED_0, true);
+    writePin(LAYER_INDICATOR_LED_1, false);
+    wait_ms(100);
+    writePin(LAYER_INDICATOR_LED_0, true);
+    writePin(LAYER_INDICATOR_LED_1, true);
+    wait_ms(100);
+    writePin(LAYER_INDICATOR_LED_0, false);
+    writePin(LAYER_INDICATOR_LED_1, true);
+    wait_ms(100);
+    writePin(LAYER_INDICATOR_LED_0, false);
+    writePin(LAYER_INDICATOR_LED_1, false);
+    wait_ms(100);
+  }
 
   matrix_init_user();
 }
@@ -47,5 +81,3 @@ void led_set_kb(uint8_t usb_led) {
 
   led_set_user(usb_led);
 }
-
-*/

keyboards/dumbpad/keymaps/default/config.h

@@ -0,0 +1,2 @@
+#pragma once
+#define TAPPING_TOGGLE 2

keyboards/dumbpad/keymaps/default/keymap.c

@@ -28,14 +28,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    |             |---------|---------|---------|---------|
    |             |    1    |    2    |    3    |   Tab   |
    |-------------|---------|---------|---------|---------|
-   | Left mouse  | MO(SUB) |    0    |    .    |  Enter  |
+   | Left mouse  | TT(SUB) |    0    |    .    |  Enter  |
    \-----------------------------------------------------'
   */
-  [_BASE] = LAYOUT( /* Base */
+  [_BASE] = LAYOUT(
                    KC_7,      KC_8,    KC_9,     KC_BSPC, 
                    KC_4,      KC_5,    KC_6,     KC_ESC, 
                    KC_1,      KC_2,    KC_3,     KC_TAB, 
-    KC_BTN1,       MO(_SUB),  KC_0,    KC_DOT,   KC_ENTER
+    KC_BTN1,       TT(_SUB),  KC_0,    KC_DOT,   KC_ENTER
   ),
   /*
         SUB LAYER
@@ -88,19 +88,34 @@ void led_set_user(uint8_t usb_led) {
 }
 
 void encoder_update_user(uint8_t index, bool clockwise) {
+  /*  Custom encoder control - handles CW/CCW turning of encoder
+   *  Default behavior:
+   *    main layer:
+   *       CW: move mouse right
+   *      CCW: move mouse left
+   *    other layers:
+   *       CW: = (equals/plus - increase slider in Adobe products)
+   *      CCW: - (minus/underscore - decrease slider in adobe products)
+   */
   if (index == 0) {
-    if (layer_state && 0x1) {
+    switch (biton32(layer_state)) {
-      if (clockwise) {
+      case _BASE:
-        tap_code(KC_VOLU);
+        // main layer - move mouse right (CW) and left (CCW)
-      } else {
+        if (clockwise) {
-        tap_code(KC_VOLD);
+          tap_code(KC_MS_R);
-      }
+        } else {
-    } else {
+          tap_code(KC_MS_L);
-      if (clockwise) {
+        }
-        tap_code(KC_MS_R);
+        break;
-      } else {
+
-        tap_code(KC_MS_L);
+      default:
-      }
+        // other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW)
+        if (clockwise) {
+          tap_code(KC_EQL);
+        } else {
+          tap_code(KC_MINS);
+        }
+        break;
     }
   }
 }

keyboards/dumbpad/keymaps/imchipwood/config.h

@@ -0,0 +1,2 @@
+#pragma once
+#define TAPPING_TOGGLE 2

keyboards/dumbpad/keymaps/imchipwood/keymap.c

@@ -0,0 +1,163 @@
+/* Copyright 2019 imchipwood
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _BASE     0
+#define _SUB      1
+#define _DBG      2
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /*
+        BASE LAYER
+   /-----------------------------------------------------`
+   |             |    7    |    8    |    9    |  Bkspc  |
+   |             |---------|---------|---------|---------|
+   |             |    4    |    5    |    6    |    +    |
+   |             |---------|---------|---------|---------|
+   |             |    1    |    2    |    3    |    *    |
+   |-------------|---------|---------|---------|---------|
+   | Play/Pause  | TT(SUB) |    0    |    .    |  Enter  |
+   \-----------------------------------------------------'
+  */
+  [_BASE] = LAYOUT(
+                   KC_P7,     KC_P8,   KC_P9,    KC_BSPC, 
+                   KC_P4,     KC_P5,   KC_P6,    KC_KP_PLUS, 
+                   KC_P1,     KC_P2,   KC_P3,    KC_KP_ASTERISK, 
+    KC_MPLY,       TT(_SUB),  KC_P0,   KC_PDOT,  KC_KP_ENTER
+  ),
+  /*
+        SUB LAYER
+   /-----------------------------------------------------`
+   |             |         |         |         | Numlock |
+   |             |---------|---------|---------|---------|
+   |             |         |         |         |    -    |
+   |             |---------|---------|---------|---------|
+   |             |         |         |         |    /    |
+   |-------------|---------|---------|---------|---------|
+   |  MO(_DBG)   |         |         |         |    =    |
+   \-----------------------------------------------------'
+  */
+  [_SUB] = LAYOUT(
+                 _______,     _______,     _______,      KC_NLCK, 
+                 _______,     _______,     _______,      KC_KP_MINUS, 
+                 _______,     _______,     _______,      KC_KP_SLASH, 
+    MO(_DBG),    _______,     _______,     _______,      KC_KP_EQUAL
+  ),
+  /*
+        DEBUG LAYER
+   /-----------------------------------------------------`
+   |             |         |         |         |  Reset  |
+   |             |---------|---------|---------|---------|
+   |             |         |         |         |         |
+   |             |---------|---------|---------|---------|
+   |             |         |         |         |         |
+   |-------------|---------|---------|---------|---------|
+   |             |         |         |         |         |
+   \-----------------------------------------------------'
+  */
+  [_DBG] = LAYOUT(
+                 _______,     _______,     _______,      RESET, 
+                 _______,     _______,     _______,      _______, 
+                 _______,     _______,     _______,      _______, 
+    _______,     _______,     _______,     _______,      _______
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  // If console is enabled, it will print the matrix position and status of each key pressed
+/*
+#ifdef CONSOLE_ENABLE
+    uprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed);
+#endif 
+*/
+  return true;
+}
+
+void keyboard_post_init_user(void) {
+  // Customise these values to desired behaviour
+  //debug_enable = true;
+  //debug_matrix = true;
+  //debug_keyboard = true;
+  //debug_mouse = true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
+
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+  /*  Custom encoder control - handles CW/CCW turning of encoder
+   *  Cusotom behavior:
+   *    main layer:
+   *       CW: volume up
+   *      CCW: volume down
+   *    sub layer:
+   *       CW: next media track
+   *      CCW: prev media track
+   *    debug layer:
+   *       CW: brightness up
+   *      CCW: brightness down
+   */
+  if (index == 0) {
+    switch (biton32(layer_state)) {
+      case _BASE:
+        // main layer - volume up (CW) and down (CCW)
+        if (clockwise) {
+          tap_code(KC_VOLU);
+        } else {
+          tap_code(KC_VOLD);
+        }
+        break;
+
+      case _SUB:
+        // sub layer - next track (CW) and previous track (CCW)
+        if (clockwise) {
+          tap_code(KC_MNXT);
+        } else {
+          tap_code(KC_MPRV);
+        }
+        break;
+
+      case _DBG:
+        // debug layer - brightness up (CW) and brightness down (CCW)
+        if (clockwise) {
+          tap_code(KC_BRIU);
+        } else {
+          tap_code(KC_BRID);
+        }
+        break;
+
+      default:
+        // any other layer (shouldn't exist..) - volume up (CW) and down (CCW)
+        if (clockwise) {
+          tap_code(KC_VOLU);
+        } else {
+          tap_code(KC_VOLD);
+        }
+        break;   
+    }
+  }
+}

keyboards/eco/rev1/rev1.h

@@ -3,11 +3,8 @@
 
 #include "../eco.h"
 
-//void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
-//void promicro_bootloader_jmp(bool program);
-
 #define LAYOUT( \
     k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014, \
     k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114, \

keyboards/eco/rev2/rev2.h

@@ -3,11 +3,8 @@
 
 #include "../eco.h"
 
-//void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
-//void promicro_bootloader_jmp(bool program);
-
 #define LAYOUT( \
     k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014, \
     k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114, \

keyboards/ergo42/rev1/rev1.h

@@ -3,10 +3,8 @@
 
 #include "ergo42.h"
 
-//void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
-
 #ifdef USE_I2C
 #include <stddef.h>
 #ifdef __AVR__
@@ -15,8 +13,6 @@
 #endif
 #endif
 
-//void promicro_bootloader_jmp(bool program);
-
 #ifndef FLIP_HALF
 // Standard Keymap
 // (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)

keyboards/ergodash/mini/mini.h

@@ -3,10 +3,8 @@
 
 #include "ergodash.h"
 
-//void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
-
 #ifdef USE_I2C
 #include <stddef.h>
 #ifdef __AVR__
@@ -15,8 +13,6 @@
 #endif
 #endif
 
-//void promicro_bootloader_jmp(bool program);
-
 #ifndef FLIP_HALF
 // Standard Keymap
 // (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)

keyboards/ergodash/rev1/rev1.h

@@ -3,10 +3,8 @@
 
 #include "ergodash.h"
 
-//void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
-
 #ifdef USE_I2C
 #include <stddef.h>
 #ifdef __AVR__
@@ -15,8 +13,6 @@
 #endif
 #endif
 
-//void promicro_bootloader_jmp(bool program);
-
 #ifndef FLIP_HALF
 // Standard Keymap
 // (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)

keyboards/ergodone/matrix.c

@@ -77,10 +77,6 @@ uint8_t matrix_cols(void)
 
 void matrix_init(void)
 {
-  // disable JTAG
-  MCUCR = (1<<JTD);
-  MCUCR = (1<<JTD);
-
   unselect_rows();
   init_cols();
 

keyboards/ergodox_infinity/keymaps/halfkeyboard/rules.mk

@@ -54,6 +54,8 @@ ARMV = 7
 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
 OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
 
+BOOTLOADER = dfu
+
 # Build Options
 #   comment out to disable the options.
 #

keyboards/ergodox_infinity/rules.mk

@@ -54,6 +54,8 @@ ARMV = 7
 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
 OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
 
+BOOTLOADER = dfu
+
 # Build Options
 #   comment out to disable the options.
 #

keyboards/ergotravel/rev1/rev1.h

@@ -3,10 +3,8 @@
 
 #include "ergotravel.h"
 
-//void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
-
 #ifdef USE_I2C
 #include <stddef.h>
 #ifdef __AVR__
@@ -15,8 +13,6 @@
 #endif
 #endif
 
-//void promicro_bootloader_jmp(bool program);
-
 #define LAYOUT( \
     L00, L01, L02, L03, L04, L05, L06,       R00, R01, R02, R03, R04, R05, R06, \
     L10, L11, L12, L13, L14, L15, L16,       R10, R11, R12, R13, R14, R15, R16, \

keyboards/fortitude60/rev1/rev1.h

@@ -3,10 +3,8 @@
 
 #include "fortitude60.h"
 
-//void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
-
 #ifdef USE_I2C
 #include <stddef.h>
 #ifdef __AVR__
@@ -15,8 +13,6 @@
 #endif
 #endif
 
-//void promicro_bootloader_jmp(bool program);
-
 // Standard Keymap
 // (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
 #define LAYOUT( \

keyboards/handwired/dactyl_manuform/4x5/4x5.h

@@ -2,10 +2,8 @@
 
 #include "dactyl_manuform.h"
 
-//void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
-
 #ifdef USE_I2C
 #include <stddef.h>
 #ifdef __AVR__
@@ -14,8 +12,6 @@
 #endif
 #endif
 
-//void promicro_bootloader_jmp(bool program);
-
 #ifndef FLIP_HALF
 #define LAYOUT( \
 	L00, L01, L02, L03, L04,                     R00, R01, R02, R03, R04, \

keyboards/handwired/dactyl_manuform/dactyl_manuform.h

@@ -14,7 +14,6 @@
     #include "62key.h"
 #endif
 
-//void promicro_bootloader_jmp(bool program);
 #include "quantum.h"
 
 

keyboards/handwired/onekey/stm32f0_disco/config.h

@@ -1,4 +1,4 @@
-/* Copyright 2018 Jack Humbert
+/* Copyright 2019
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,12 +14,10 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "proton_c.h"
+#pragma once
 
-void matrix_init_kb(void) {
+#include "config_common.h"
-  // Turn status LED on
-  setPinOutput(C13);
-  writePinHigh(C13);
 
-  matrix_init_user();
+#define MATRIX_COL_PINS { B4 }
-}
+#define MATRIX_ROW_PINS { B5 }
+#define UNUSED_PINS

keyboards/handwired/onekey/stm32f0_disco/halconf.h

@@ -111,7 +111,7 @@
  * @brief   Enables the PWM subsystem.
  */
 #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                 FALSE
+#define HAL_USE_PWM                 TRUE
 #endif
 
 /**

keyboards/handwired/onekey/stm32f0_disco/mcuconf.h

@@ -120,7 +120,7 @@
 #define STM32_PWM_USE_ADVANCED              FALSE
 #define STM32_PWM_USE_TIM1                  FALSE
 #define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
 #define STM32_PWM_TIM1_IRQ_PRIORITY         3
 #define STM32_PWM_TIM2_IRQ_PRIORITY         3
 #define STM32_PWM_TIM3_IRQ_PRIORITY         3

keyboards/handwired/onekey/stm32f0_disco/readme.md

@@ -0,0 +1,5 @@
+# STM32F072 Discovery kit onekey
+
+Supported Hardware: <https://www.st.com/en/evaluation-tools/32f072bdiscovery.html>  
+
+To trigger keypress, short together pins *B4* and *B5*.

keyboards/handwired/onekey/stm32f0_disco/rules.mk

@@ -1,7 +1,3 @@
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
 ## chip/board settings
 # the next two should match the directories in
 #  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
@@ -33,6 +29,6 @@ ARMV = 6
 #   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
 #STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
 
-# Build Options
+# Options to pass to dfu-util when flashing
-#   comment out to disable the options.
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-#
+DFU_SUFFIX_ARGS = -p df11 -v 0483

keyboards/handwired/promethium/keymaps/priyadi/keymap.c

@@ -895,13 +895,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Emoji
  * ,-----------------------------------------------------------------------------------.
- * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |  💕  |  😢  |  😩  | 😍   |  😏  |  😂  |  ♻  |  😒  |  🎶  | 👌  |  😔  |  😌  |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |  👍  |  🙏  |  😁  |  😅  |  😳  |  😊  |  ❤  |  👋  |  😘  | 🙌  |  😎  | 🙈   |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |  👎  |  😴  |  👏  |  😭  |  ✌  |  💔  |  ☀  |  😊  |  😉  |  🌔  |  😕  |  🙉  |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |  💩  |  👀  |  💯  |      |  💀  |  😈  |  😇  |  😱  |     |  😋  |  😞  |  🙊  |
  * `-----------------------------------------------------------------------------------'
  */
 [_EMOJI] = LAYOUT(

keyboards/handwired/promethium/matrix.c

@@ -104,13 +104,6 @@ uint8_t matrix_cols(void) {
 }
 
 void matrix_init(void) {
-
-    // To use PORTF disable JTAG with writing JTD bit twice within four cycles.
-    #if  (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega32U4__))
-        MCUCR |= _BV(JTD);
-        MCUCR |= _BV(JTD);
-    #endif
-
     // initialize row and col
     unselect_rows();
     init_cols();

keyboards/handwired/steamvan/info.json

@@ -0,0 +1,24 @@
+{
+  "keyboard_name": "steamvan",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 12.75,
+  "height": 4,
+  "layouts": {
+      "LAYOUT_standard": {
+          "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"|", "x":11, "y":0, "w":1.75}, {"label":"Caps Lock", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"\"", "x":11.25, "y":1, "w":1.5}, {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"x":11.75, "y":2}, {"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"Win", "x":1.25, "y":3, "w":1.5}, {"label":"Alt", "x":2.75, "y":3, "w":1.25}, {"x":4, "y":3, "w":2.25}, {"x":6.25, "y":3, "w":2}, {"label":"Alt", "x":8.25, "y":3, "w":1.25}, {"label":"Win", "x":9.5, "y":3, "w":1.5}, {"label":"Menu", "x":11, "y":3, "w":1.75}]
+      },
+
+      "LAYOUT_arrow": {
+          "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"|", "x":11, "y":0, "w":1.75}, {"label":"Caps Lock", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"\"", "x":11.25, "y":1, "w":1.5}, {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"x":11.75, "y":2}, {"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"Win", "x":1.25, "y":3, "w":1.5}, {"label":"Alt", "x":2.75, "y":3, "w":1.25}, {"x":4, "y":3, "w":2.25}, {"x":6.25, "y":3, "w":2}, {"x":8.25, "y":3, "w":1.5}, {"label":"Alt", "x":9.75, "y":3}, {"label":"Win", "x":10.75, "y":3}, {"label":"Menu", "x":11.75, "y":3}]
+      },
+
+      "LAYOUT_command": {
+          "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"|", "x":11, "y":0, "w":1.75}, {"label":"Caps Lock", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"\"", "x":11.25, "y":1, "w":1.5}, {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"x":11.75, "y":2}, {"label":"Ctrl", "x":0, "y":3}, {"label":"Win", "x":1, "y":3}, {"label":"Alt", "x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3, "w":2.25}, {"x":6.25, "y":3, "w":2}, {"x":8.25, "y":3, "w":1.5}, {"label":"Alt", "x":9.75, "y":3, "w":1.5}, {"label":"Win", "x":11.25, "y":3, "w":1.5}]
+      },
+
+       "LAYOUT_arrow_command": {
+          "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"|", "x":11, "y":0, "w":1.75}, {"label":"Caps Lock", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"\"", "x":11.25, "y":1, "w":1.5}, {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"x":11.75, "y":2}, {"label":"Ctrl", "x":0, "y":3}, {"label":"Win", "x":1, "y":3}, {"label":"Alt", "x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3, "w":2.25}, {"x":6.25, "y":3, "w":2}, {"x":8.25, "y":3, "w":1.5}, {"label":"Alt", "x":9.75, "y":3}, {"label":"Win", "x":10.75, "y":3}, {"label":"Menu", "x":11.75, "y":3}]
+      }
+  }
+}

keyboards/handwired/steamvan/keymaps/default/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+// place overrides here

keyboards/handwired/steamvan/keymaps/default/keymap.c

@@ -0,0 +1,93 @@
+/* Copyright 2019 John M Daly <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// This file is based on the default keyman the the MiniVan.
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum layer_names {
+    _QW,
+    _DV,
+    _CM,
+    _L1,
+    _L2,
+    _L3,
+};
+
+// Curly braces have their own keys. These are defined to make them not mess up
+// the grid in layer 2.
+#define L_CURBR LSFT(KC_LBRC)
+#define R_CURBR LSFT(KC_RBRC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QW] = LAYOUT_standard( /* Qwerty */
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, MO(_L1),
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2),
+    KC_LCTL, MO(_L2), KC_LGUI,                   KC_ENT,  KC_SPC,                    KC_RALT, KC_ESC,  TG(_L3)
+  ),
+  [_DV] = LAYOUT_standard( /* Dvorak */
+    KC_TAB,  KC_SLSH, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+    MO(_L1), KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    MO(_L1),
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    MO(_L2),
+    KC_LCTL, MO(_L2), KC_LGUI,                   KC_ENT,  KC_SPC,                    KC_RALT, KC_ESC,  TG(_L3)
+  ),
+  [_CM] = LAYOUT_standard( /* Colemak */
+    KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+    MO(_L1), KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    MO(_L1),
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, MO(_L2),
+    KC_LCTL, MO(_L2), KC_LGUI,                   KC_ENT,  KC_SPC,                    KC_RALT, KC_ESC,  TG(_L3)
+  ),
+  [_L1] = LAYOUT_standard( /* LAYER 1 */
+    KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+    _______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_DOWN, KC_UP,   KC_LEFT, KC_RGHT, _______,
+    _______, KC_ESC,  _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, KC_RSFT,
+    _______, KC_LGUI, _______,                   _______, _______,                   _______, _______, _______
+  ),
+  [_L2] = LAYOUT_standard( /* LAYER 2 */
+    _______, DF(_QW), DF(_DV), DF(_CM), _______, _______, _______, KC_7,    KC_8,    KC_9,    KC_0,    _______,
+    KC_ESC,  KC_PIPE, KC_DQUO, KC_UNDS, KC_PLUS, L_CURBR, R_CURBR, KC_4,    KC_5,    KC_6,    KC_VOLU, KC_ENT,
+    _______, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3,    KC_VOLD, _______,
+    _______, _______, _______,                   _______, _______,                   _______, _______, _______
+  ),
+  [_L3] = LAYOUT_standard( /* LAYER 3 */
+    _______, _______, _______, _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   _______,
+    KC_ESC,  _______, _______, _______, _______, _______, _______, KC_F5,   KC_F6,   KC_F7,   KC_F8,   _______,
+    KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,
+    _______, KC_LSFT, KC_B,                      KC_SPC,  KC_C,                      _______, _______, _______
+  )
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/handwired/steamvan/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for the SteamVan, based on the MiniVan default layout.

keyboards/handwired/steamvan/keymaps/jmdaly/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+// place overrides here

keyboards/handwired/steamvan/keymaps/jmdaly/keymap.c

@@ -0,0 +1,80 @@
+/* Copyright 2019 John M Daly <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum {
+  // Layers
+  _L1,
+  _L2,
+  _L3,
+  _L4,
+  _L5
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_L1] = LAYOUT_standard( /* Qwerty */
+    LT(_L5, KC_TAB),        KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,     KC_P,    KC_BSPC,
+    CTL_T(KC_ESC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,     KC_SCLN, LT(_L2, KC_QUOT),
+    KC_LSPO,       KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,   KC_SLSH, KC_RSPC,
+    MO(_L2),       KC_LGUI, MO(_L3),          KC_ENT,  LT(_L2, KC_SPC),                    KC_RALT, KC_BSLS,           MO(_L4)
+  ),
+  [_L2] = LAYOUT_standard( /* LAYER 2 */
+    KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+    _______, KC_BSLS, KC_QUOT, KC_MINS, KC_EQL,  KC_LBRC, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______,
+    _______, KC_ESC,  _______, KC_PSCR, _______, _______, _______, KC_MSTP, KC_LBRC, KC_RBRC, KC_MNXT, _______,
+    _______, KC_LGUI, _______,          _______, _______,                   _______, _______,          MO(_L4)
+  ),
+  [_L3] = LAYOUT_standard( /* LAYER 3 */
+    KC_MINS, KC_1,     KC_2,     KC_3,    KC_4,    KC_5,          KC_6,          KC_7,    KC_8,    KC_9,    KC_0,    _______,
+    KC_EQL,  KC_PIPE,  KC_TILD,  KC_UNDS, KC_PLUS, LSFT(KC_LBRC), LSFT(KC_RBRC), KC_4,    KC_5,    KC_6,    KC_VOLU, KC_INS,
+    _______, _______,  _______,  KC_DQUO, _______, _______,       KC_0,          KC_1,    KC_2,    KC_3,    KC_VOLD, _______,
+    _______, _______,  _______,           _______, _______,                               _______, _______,          _______
+  ),
+  [_L4] = LAYOUT_standard( /* LAYER 4 */
+    RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,     KC_PGUP,   _______,
+    KC_ESC,  _______, _______, _______, _______, _______, _______, KC_F5,   KC_F6,   KC_HOME,   KC_END,    _______,
+    KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_F9,   KC_F10,  KC_PGDN,   KC_F12,    _______,
+    _______, KC_LSFT, KC_B,             KC_SPC,  KC_C,                      _______, _______,              _______
+  ),
+  [_L5] = LAYOUT_standard( /* LAYER 5 */
+    _______,   LGUI(KC_1),   LGUI(KC_2),   LGUI(KC_3),   LGUI(KC_4),   LGUI(KC_5),   LGUI(KC_6),   LGUI(KC_7),   LGUI(KC_8),   LGUI(KC_9),     LGUI(KC_0),   LGUI(KC_MINS),
+    KC_ESC,  _______, _______, _______, _______, _______, _______, KC_F5,   KC_F6,   KC_HOME,   KC_END,    _______,
+    KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_F9,   KC_F10,  KC_PGDN,   KC_F12,    _______,
+    _______, KC_LSFT, KC_B,             KC_SPC,  KC_C,                      _______, _______,              _______
+  )
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/handwired/steamvan/keymaps/jmdaly/readme.md

@@ -0,0 +1 @@
+# jmdaly's keymap for the steamvan