Added ASCII legend to melody96 to help visualize the layouts (#3117)

* add rgblight mode 35 (RGB cyclic mode) into quantum/rgblight.c

* Update docs, add rgblight mode 35(RGB cyclic)

* rename RGBCYCLIC to RGBTEST

docs/custom_quantum_functions.md

@@ -135,9 +135,11 @@ void led_set_user(uint8_t usb_led) {
 * Keyboard/Revision: `void led_set_kb(uint8_t usb_led)`
 * Keymap: `void led_set_user(uint8_t usb_led)`
 
+
 # Matrix Initialization Code
 
-Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LED's or i²c controllers you will need to set up that hardware before it can be used.
+Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LED's or i²c controllers you will need to set up that hardware before it can be used.  
+
 
 ### Example `matrix_init_user()` Implementation
 
@@ -177,9 +179,38 @@ This function gets called at every matrix scan, which is basically as often as t
 You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LED's or a display) or other functionality that you want to trigger regularly even when the user isn't typing.
 
 
+# Keyboard Idling/Wake Code
+
+If the board supports it, it can be "idled", by stopping a number of functions.  A good example of this is RGB lights or backlights.   This can save on power consumption, or may be better behavior for your keyboard.  
+
+This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_init_*`, which are called when the system is board is idled and when it wakes up, respectively. 
+
+
+### Example suspend_power_down_user() and suspend_wakeup_init_user() Implementation
+
+This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
+
+```
+void suspend_power_down_user(void)
+{
+    rgb_matrix_set_suspend_state(true);
+}
+
+void suspend_wakeup_init_user(void)
+{
+    rgb_matrix_set_suspend_state(false);
+}
+
+```
+
+### `keyboard_init_*` Function Documentation
+
+* Keyboard/Revision: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
+* Keymap: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
+
 # Layer Change Code
 
-Thir runs code every time that the layers get changed.  This can be useful for layer indication, or custom layer handling. 
+This runs code every time that the layers get changed.  This can be useful for layer indication, or custom layer handling. 
 
 ### Example `layer_state_set_*` Implementation
 

docs/feature_rgblight.md

@@ -146,6 +146,7 @@ These control the RGB Lighting functionality.
 |`RGB_MODE_KNIGHT`  |`RGB_M_K` |"Knight Rider" animation mode                                       |
 |`RGB_MODE_XMAS`    |`RGB_M_X` |Christmas animation mode                                            |
 |`RGB_MODE_GRADIENT`|`RGB_M_G` |Static gradient animation mode                                      |
+|`RGB_MODE_RGBTEST `|`RGB_M_T` |Red,Green,Blue test animation mode                                  |
 
 note: for backwards compatibility, `RGB_SMOD` is an alias for `RGB_MOD`.
 

docs/hardware_keyboard_guidelines.md

@@ -47,16 +47,6 @@ The `info.json` file is a JSON formatted dictionary with the following keys avai
   * Example: `Clueboard 66%`
 * `url`
   * A URL to the keyboard's product page, [QMK.fm/keyboards](https://qmk.fm/keyboards) page, or other page describing information about the keyboard.
-* `bootloader`
-  * What bootloader this keyboard uses. Available options:
-    * `atmel-dfu`
-    * `kiibohd-dfu-util`
-    * `lufa-dfu`
-    * `qmk-dfu`
-    * `stm32-dfu-util`
-    * `caterina`
-    * `halfkay`
-    * `bootloadHID`
 * `maintainer`
   * GitHub username of the maintainer, or `qmk` for community maintained boards
 * `width`

docs/keycodes.md

@@ -283,6 +283,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`RGB_MODE_KNIGHT`  |`RGB_M_K` |"Knight Rider" animation mode                                       |
 |`RGB_MODE_XMAS`    |`RGB_M_X` |Christmas animation mode                                            |
 |`RGB_MODE_GRADIENT`|`RGB_M_G` |Static gradient animation mode                                      |
+|`RGB_MODE_RGBTEST` |`RGB_M_T` |Red,Green,Blue test animation mode                                  |
 
 ## [RGB Matrix Lighting](feature_rgb_matrix.md)
 

keyboards/bigseries/keymaps/dudeofawesome/README.md

@@ -0,0 +1,18 @@
+# DudeOfAwesome's Big Series 1-key layout
+
+## Features
+
+### Tap dancing taps:
+1. Media Play / Pause
+1. Media Next
+1. RGB Mode Next
+1. RGB Mode Previous
+
+## Building and flashing
+
+1. Put your board in DFU mode with the button on the bottom
+1. Flash:
+    ```bash
+    $ make bigseries:dudeofawesome:dfu
+    ```
+

keyboards/bigseries/keymaps/dudeofawesome/config.h

@@ -0,0 +1,23 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#define TAPPING_TERM 1000
+
+#endif

keyboards/bigseries/keymaps/dudeofawesome/keymap.c

@@ -0,0 +1,50 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum TAP_DANCE {
+  TD_PLAY = 0,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  LAYOUT(TD(TD_PLAY)),
+};
+
+void tap_dance (qk_tap_dance_state_t *state, void *user_data) {
+  switch (state->count) {
+    case 0 ... 1:
+      register_code(KC_MEDIA_PLAY_PAUSE);
+      unregister_code(KC_MEDIA_PLAY_PAUSE);
+      break;
+    case 2:
+      register_code(KC_MEDIA_NEXT_TRACK);
+      unregister_code(KC_MEDIA_NEXT_TRACK);
+      break;
+    case 3:
+      rgblight_step();
+      break;
+    case 4: default:
+      rgblight_step_reverse();
+      break;
+  }
+}
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [TD_PLAY] = ACTION_TAP_DANCE_FN(tap_dance),
+};

keyboards/bigseries/keymaps/dudeofawesome/rules.mk

@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes

keyboards/bigswitch/bigswitch.c

@@ -26,8 +26,8 @@ void matrix_init_user(void) {
 void matrix_scan_user(void) {
   if (runonce && timer_elapsed(my_timer) > 1000) {
     runonce = false;
-    rgblight_sethsv(0x0, 0xff, 0x80);
+    rgblight_sethsv_noeeprom(0x0, 0xff, 0x80);
-    rgblight_mode(9);
+    rgblight_mode_noeeprom(9);
-    rgblight_enable();
+    rgblight_enable_noeeprom();
   }
 }

keyboards/bmini/bmini.h

@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "quantum.h"
 
-#define KEYMAP( \
+#define LAYOUT( \
   K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
   K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4,      KD0, \
   K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3,      K67, \
@@ -38,7 +38,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   { K07, K17,   K27, K37,   K47,   K57,   K67,   K77,   KC_NO, KC_NO, KA7,   KB7, KC7,   KD7,   KE7   } \
 }
 
-#define KC_KEYMAP( \
+#define LAYOUT_kc( \
     K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
     K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4,      KD0, \
     K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3,      K67, \

keyboards/bmini/info.json

@@ -0,0 +1,13 @@
+{
+  "keyboard_name": "B.mini",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 16,
+  "height": 6,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 84,
+      "layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1, "w":2}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.25}, {"label":"K10", "x":1.25, "y":5, "w":1.25}, {"label":"K20", "x":2.5, "y":5, "w":1.25}, {"label":"K56", "x":3.75, "y":5, "w":6.25}, {"label":"K57", "x":10, "y":5}, {"label":"KB0", "x":11, "y":5}, {"label":"KC0", "x":12, "y":5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
+    }
+  }
+}

keyboards/bmini/keymaps/default/keymap.c

@@ -15,10 +15,10 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#include "bmini.h"
+#include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = KEYMAP(
+    [0] = LAYOUT(
         KC_ESC, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12, KC_PSCR,KC_HOME,KC_END,
         KC_GRV, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,        KC_DEL,
         KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,        KC_INS,
@@ -26,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_LSFT,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,                KC_UP,  KC_PGDN,
         KC_LCTL,KC_LALT,KC_LGUI,                KC_SPC,                                 KC_RGUI,KC_RALT,KC_RCTL,KC_LEFT,KC_DOWN,KC_RGHT
     ),
-    [1] = KEYMAP(
+    [1] = LAYOUT(
         KC_TRNS,RGB_TOG,RGB_MOD,RGB_HUI,RGB_SAI,RGB_VAI,RGB_HUD,RGB_SAD,RGB_VAD,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_END,
         KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_DEL,
         KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,        KC_INS,

keyboards/bmini/readme.md

@@ -3,9 +3,9 @@ B.mini
 
 A 75% keyboard with RGB
 
-Keyboard Maintainer: QMK Community
+Keyboard Maintainer: QMK Community  
-Hardware Supported: B.mini PCB
+Hardware Supported: B.mini PCB  
-Hardware Availability: http://winkeyless.kr/product/b-mini-x2-pcb/
+Hardware Availability: http://winkeyless.kr/product/b-mini-x2-pcb/  
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/canoe/canoe.c

@@ -42,24 +42,55 @@ void backlight_init_ports(void) {
 
 #endif
 
+// for keyboard subdirectory level init functions
+// @Override
+void matrix_init_kb(void) {
+  // call user level keymaps, if any
+  matrix_init_user();
+}
+
 #ifdef RGBLIGHT_ENABLE
 extern rgblight_config_t rgblight_config;
 
+// custom RGB driver
 void rgblight_set(void) {
-    if (!rgblight_config.enable) {
+  if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+    for (uint8_t i=0; i<RGBLED_NUM; i++) {
-            led[i].r = 0;
+      led[i].r = 0;
-            led[i].g = 0;
+      led[i].g = 0;
-            led[i].b = 0;
+      led[i].b = 0;
-        }
     }
+  }
 
+  i2c_init();
+  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
+bool rgb_init = false;
+
+void matrix_scan_kb(void) {
+  // if LEDs were previously on before poweroff, turn them back on
+  if (rgb_init == false && rgblight_config.enable) {
     i2c_init();
     i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+    rgb_init = true;
+  }
+
+  rgblight_task();
+#else
+void matrix_scan_kb(void) {
+#endif
+  matrix_scan_user();
+  /* Nothing else for now. */
 }
 
-__attribute__ ((weak))
+__attribute__((weak)) // overridable
+void matrix_init_user(void) {
+
+}
+
+
+__attribute__((weak)) // overridable
 void matrix_scan_user(void) {
-    rgblight_task();
+
 }
-#endif

keyboards/canoe/keymaps/dhertz/keymap.c

@@ -0,0 +1,62 @@
+#include QMK_KEYBOARD_H
+#include "dhertz.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,---------------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| Backsp|Del|
+     * |---------------------------------------------------------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Enter|Hom|
+     * |------------------------------------------------------`    |---|
+     * |SrCtl |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  \|    |End|
+     * |---------------------------------------------------------------|
+     * |Shif|  #|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift |Up |PgD|
+     * |---------------------------------------------------------------|
+     * |NcCtl|  Alt| CTab|       LyrSpc        |  CGv|  Alt|Lef|Dow|Rig|
+     * `---------------------------------------------------------------'
+     */
+  [0] = LAYOUT_iso(
+      KC_ESC, KC_1,  KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
+      KC_TAB,  KC_Q,  KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_HOME,
+      SRCH_CTL,   KC_A,  KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_END,
+      KC_LSFT, HSH_TLD, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
+      NC_CTL, KC_LALT, CMD_TAB_CMD, LYR_SPC, CMD_GRV_CMD, KC_RALT, KC_LEFT, KC_DOWN, KC_RIGHT
+      ),
+    /* Layer 1: Special
+     * ,---------------------------------------------------------------.
+     * |  §| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|       |Iso|
+     * |---------------------------------------------------------------|
+     * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |   |
+     * |------------------------------------------------------`    |---|
+     * |      |   |   |   |   |   |   |   |   |CSL|   |   |  `|    |   |
+     * |---------------------------------------------------------------|
+     * |    |  `|   |   |CAC|   |   |   |   |   |   |   |      |PgU|   |
+     * |---------------------------------------------------------------|
+     * |     |     |     |                     |     |     |Hom|PgD|End|
+     * `---------------------------------------------------------------'
+     */
+  [1] = LAYOUT_iso(
+      KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F10, KC_F11, KC_TRNS, ISO_COUNTRY_CODE,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CMD_SFT_L, KC_TRNS, KC_TRNS, KC_NUBS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_NUBS, KC_TRNS, KC_TRNS, CMD_ALT_C, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDOWN, KC_END
+      ),
+};
+
+void matrix_init_keymap(void) {
+    rgblight_enable_noeeprom();
+    rgblight_sethsv_teal();
+}
+
+uint32_t layer_state_set_keymap(uint32_t state) {
+    switch (biton32(state)) {
+        case 1:
+            rgblight_sethsv_noeeprom_magenta();
+            break;
+        default: //  for any other layers, or the default layer
+            rgblight_sethsv_noeeprom_cyan();
+            break;
+    }
+    return state;
+}

keyboards/canoe/matrix.c

@@ -21,7 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "matrix.h"
 
 #ifndef DEBOUNCE
-#define DEBOUNCE	5
+#   define DEBOUNCE	5
 #endif
 
 static uint8_t debouncing = DEBOUNCE;
@@ -29,6 +29,9 @@ static uint8_t debouncing = DEBOUNCE;
 static matrix_row_t matrix[MATRIX_ROWS];
 static matrix_row_t matrix_debouncing[MATRIX_ROWS];
 
+void matrix_set_row_status(uint8_t row);
+uint8_t bit_reverse(uint8_t x);
+
 void matrix_init(void) {
     // all outputs for rows high
     DDRB = 0xFF;
@@ -47,18 +50,8 @@ void matrix_init(void) {
         matrix[row] = 0x00;
         matrix_debouncing[row] = 0x00;
     }
-}
 
-void matrix_set_row_status(uint8_t row) {
+    matrix_init_quantum();
-    DDRB = (1 << row);
-    PORTB = ~(1 << row);
-}
-
-uint8_t bit_reverse(uint8_t x) {
-    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
-    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
-    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
-    return x;
 }
 
 uint8_t matrix_scan(void) {
@@ -93,11 +86,24 @@ uint8_t matrix_scan(void) {
         }
     }
 
-    matrix_scan_user();
+    matrix_scan_quantum();
 
     return 1;
 }
 
+// declarations
+void matrix_set_row_status(uint8_t row) {
+    DDRB = (1 << row);
+    PORTB = ~(1 << row);
+}
+
+uint8_t bit_reverse(uint8_t x) {
+    x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
+    x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
+    x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
+    return x;
+}
+
 inline matrix_row_t matrix_get_row(uint8_t row) {
     return matrix[row];
 }

keyboards/chocopad/chocopad.h

@@ -3,7 +3,7 @@
 
 #include "quantum.h"
 
-#define KEYMAP( \
+#define LAYOUT_ortho_4x4( \
     A1, A2, A3, A4, \
     B1, B2, B3, B4, \
     C1, C2, C3, C4, \
@@ -16,13 +16,13 @@
 }
 
 // Used to create a keymap using only KC_ prefixed keys
-#define KC_KEYMAP( \
+#define LAYOUT_kc( \
     A1, A2, A3, A4, \
     B1, B2, B3, B4, \
     C1, C2, C3, C4, \
     D1, D2, D3, D4 \
 ) \
-    KEYMAP( \
+    LAYOUT_ortho_4x4( \
         KC_##A1, KC_##A2, KC_##A3, KC_##A4, \
         KC_##B1, KC_##B2, KC_##B3, KC_##B4, \
         KC_##C1, KC_##C2, KC_##C3, KC_##C4, \

keyboards/chocopad/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "Chocopad",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 4,
+  "height": 4,
+  "layouts": {
+    "LAYOUT_ortho_4x4": {
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]
+    }
+  }
+}

keyboards/chocopad/keymaps/default/keymap.c

@@ -1,61 +1,30 @@
-#include "chocopad.h"
+#include QMK_KEYBOARD_H
 
 #define _BASE 0
 #define _FN1 1
 #define _FN2 2
 
-#define KC_ KC_TRNS
 #define _______ KC_TRNS
 
-#define KC_X1 MO(_FN1)
-#define KC_X2 MO(_FN2)
-#define KC_RST RESET
-#define KC_BSTP BL_STEP
-#define KC_RTOG RGB_TOG
-#define KC_RMOD RGB_MOD
-#define KC_RHUI RGB_HUI
-#define KC_RHUD RGB_HUD
-#define KC_RSAI RGB_SAI
-#define KC_RSAD RGB_SAD
-#define KC_RVAI RGB_VAI
-#define KC_RVAD RGB_VAD
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [_BASE] = KC_KEYMAP(
+  [_BASE] = LAYOUT_ortho_4x4(
-  //,----+----+----+----.
+    KC_PGUP,  KC_HOME,  KC_UP,    KC_END , \
-     PGUP,HOME, UP ,END ,
+    KC_PGDN,  KC_LEFT,  KC_DOWN,  KC_RGHT, \
-  //|----+----+----+----|
+    MO(_FN2), KC_VOLU,  KC_MPLY,  KC_MPRV, \
-     PGDN,LEFT,DOWN,RGHT,
+    MO(_FN1), KC_VOLD,  KC_MUTE,  KC_MNXT  \
-  //|----+----+----+----|
-      X2 ,VOLU,MPLY,MPRV,
-  //|----+----+----+----|
-      X1 ,VOLD,MUTE,MNXT
-  //`----+----+----+----'
   ),
-
+  [_FN1] = LAYOUT_ortho_4x4(
-  [_FN1] = KC_KEYMAP(
+    KC_ESC,   KC_P7,    KC_P8,    KC_P9,   \
-  //,----+----+----+----.
+    KC_TAB,   KC_P4,    KC_P5,    KC_P6,   \
-     ESC , P7 , P8 , P9 ,
+    KC_ENT,   KC_P1,    KC_P2,    KC_P3,   \
-  //|----+----+----+----|
+    _______,  KC_P0,    KC_P0,    KC_DOT   \
-     TAB , P4 , P5 , P6 ,
-  //|----+----+----+----|
-     ENT , P1 , P2 , P3 ,
-  //|----+----+----+----|
-         , P0 , P0 ,DOT 
-  //`----+----+----+----'
   ),
-
+  [_FN2] = LAYOUT_ortho_4x4(
-  [_FN2] = KC_KEYMAP(
+    RGB_TOG,  RGB_HUI,  RGB_SAI,  RGB_VAI, \
-  //,----+----+----+----.
+    RGB_MOD,  RGB_HUD,  RGB_SAD,  RGB_VAD, \
-     RTOG,RHUI,RSAI,RVAI,
+    _______,  _______,  _______,  RESET,  \
-  //|----+----+----+----|
+    BL_STEP,  _______,  _______,  _______  \
-     RMOD,RHUD,RSAD,RVAD,
-  //|----+----+----+----|
-         ,    ,    ,RST ,
-  //|----+----+----+----|
-     BSTP,    ,    ,    
-  //`----+----+----+----'
   )
 
 };

keyboards/chocopad/rules.mk

@@ -54,3 +54,5 @@ NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https:/
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes
+
+LAYOUTS = ortho_4x4

keyboards/christmas_tree/christmas_tree.h

@@ -3,7 +3,7 @@
 #include "quantum.h"
 
 
-#define KEYMAP( \
+#define LAYOUT( \
 	k00, k01, k02, k03, k04, k05 \
 ) \
 { \

keyboards/christmas_tree/info.json

@@ -1,13 +1,14 @@
 {
-    "keyboard_name": "Christmas Tree",
+  "keyboard_name": "Christmas Tree",
-    "keyboard_folder": "christmas_tree",
+  "keyboard_folder": "christmas_tree",
-    "url": "https://www.reddit.com/r/MechanicalKeyboards/comments/7cqxpf/gb_christmas_tree_pcb_gb_now_live/",
+  "url": "https://www.reddit.com/r/MechanicalKeyboards/comments/7cqxpf/gb_christmas_tree_pcb_gb_now_live/",
-    "maintainer": "That-Canadian",
+  "maintainer": "That-Canadian",
-    "width": 3,
+  "width": 3,
-    "height": 3,
+  "height": 3,
-    "layouts": {
+  "layouts": {
-        "2017": {
+    "2017": {
-            "key_count": 6
+      "key_count": 6,
-        }
+      "layout": [{"x":1, "y":0}, {"x":0.5, "y":1}, {"x":1.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}]
     }
+  }
 }

keyboards/christmas_tree/keymaps/default/keymap.c

@@ -14,7 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "christmas_tree.h"
+#include QMK_KEYBOARD_H
 
 extern keymap_config_t keymap_config;
 
@@ -32,27 +32,35 @@ enum custom_keycodes {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-/* Base
+  /* Base
- *         ,------.
+   *         ,------.
- *         |   1  |
+   *         |   1  |
- *     ,------+------.
+   *     ,------+------.
- *     |   2  |   3  |
+   *     |   2  |   3  |
- * ,------+------+------.
+   * ,------+------+------.
- * |   4  | FUNC |   6  |
+   * |   4  | FUNC |   6  |
- * `--------------------'
+   * `--------------------'
- */
+   */
-[_BASE] = KEYMAP(KC_1, KC_2, KC_3, KC_4, MO(_FUNC), KC_6),
+  [_BASE] = LAYOUT(
+            KC_1,
+         KC_2, KC_3,
+    KC_4, MO(_FUNC), KC_6
+  ),
 
-/* Func
+  /* Func
- *         ,------.
+   *         ,------.
- *         |BCKLIT|
+   *         |BCKLIT|
- *     ,------+------.
+   *     ,------+------.
- *     |   8  |   9  |
+   *     |   8  |   9  |
- * ,------+------+------.
+   * ,------+------+------.
- * |   0  | FUNC | RESET|
+   * |   0  | FUNC | RESET|
- * `--------------------'
+   * `--------------------'
- */
+   */
-[_FUNC] = KEYMAP(BACKLIT, KC_8, KC_9, KC_0, _______, RESET)
+  [_FUNC] = LAYOUT(
+            BACKLIT,
+         KC_8, KC_9,
+    KC_0, _______, RESET
+  )
 
 
 };

keyboards/ergodox_ez/keymaps/bpruitt-goddard/config.h

@@ -0,0 +1,28 @@
+#include "../../config.h"
+
+// Sets good default for the speed of the mouse.
+#undef MOUSEKEY_INTERVAL
+#undef MOUSEKEY_DELAY
+#undef MOUSEKEY_TIME_TO_MAX
+#undef MOUSEKEY_MAX_SPEED
+
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_DELAY          100
+#define MOUSEKEY_TIME_TO_MAX    60
+#define MOUSEKEY_MAX_SPEED      7
+
+#undef MOUSEKEY_WHEEL_MAX_SPEED
+#undef MOUSEKEY_WHEEL_TIME_TO_MAX
+#undef MOUSEKEY_WHEEL_DELAY
+
+#define MOUSEKEY_WHEEL_MAX_SPEED    5
+#define MOUSEKEY_WHEEL_TIME_TO_MAX  60
+#define MOUSEKEY_WHEEL_DELAY        100
+
+#undef TAPPING_TOGGLE
+#undef TAPPING_TERM
+#undef IGNORE_MOD_TAP_INTERRUPT
+
+#define TAPPING_TOGGLE  1
+#define TAPPING_TERM    150
+#define IGNORE_MOD_TAP_INTERRUPT

keyboards/ergodox_ez/keymaps/bpruitt-goddard/keymap.c

@@ -0,0 +1,234 @@
+// An Ergodox EZ keymap mostly following the programmer's dvorak layout.
+// There is a standard QWERTY layer as well
+//
+// See the README.md file for an image of this keymap.
+
+#include QMK_KEYBOARD_H
+
+// The layers that we are defining for this keyboards.
+#define BASE 0
+#define NUM 1
+#define QWERTY 2
+#define MAC 3
+
+// The Tap Dance identifiers, used in the TD keycode and tap_dance_actions array.
+#define TAP_MACRO 0
+
+// SAFE_RANGE must be used to tag the first element of the enum.
+// DYNAMIC_MACRO_RANGE must always be the last element of the enum if other
+// values are added (as its value is used to create a couple of other keycodes
+// after it).
+enum custom_keycodes {
+    MC_ARROW = SAFE_RANGE,
+    DYNAMIC_MACRO_RANGE
+};
+
+// A 'transparent' key code (that falls back to the layers below it).
+#define ___ KC_TRANSPARENT
+
+// A 'blocking' key code. Does nothing but prevent falling back to another layer.
+#define XXX KC_NO
+
+// Some combined keys (one normal keycode when tapped and one modifier or layer
+// toggle when held).
+#define SPC_RALT  MT(MOD_RALT, KC_SPC)  // SPACE key and right alt modifier.
+
+// The most portable copy/paste keys (windows (mostly), linux, and some terminal emulators).
+#define MK_CUT    LSFT(KC_DEL)  // shift + delete
+#define MK_COPY   LCTL(KC_INS)  // ctrl + insert
+#define MK_PASTE  LSFT(KC_INS)  // shift + insert
+//Move mac desktop spaces
+#define MAC_L     LGUI(LSFT(KC_UP)) // cmd + shift + up
+#define MAC_R     LGUI(LSFT(KC_DOWN)) // cmd + shift + down
+
+// This file must be included after DYNAMIC_MACRO_RANGE is defined...
+#include "dynamic_macro.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  // Layer 0: basic keys.
+  [BASE] = LAYOUT_ergodox_pretty(
+    KC_DLR,           KC_AMPR,  KC_LBRC,  KC_LCBR, KC_RCBR, KC_LPRN, KC_CIRC,           KC_F4,        KC_EQUAL,KC_ASTR, KC_BSLASH, KC_PLUS, KC_RBRACKET, KC_EXLM,
+    GUI_T(KC_BSLASH), KC_SCOLON,KC_COMMA, KC_DOT,  KC_P,    KC_Y,    KC_PERC,           KC_DELETE,    KC_F,    KC_G,    KC_C,      KC_R,    KC_L,        KC_SLASH,
+    MO(NUM),          KC_A,     KC_O,     KC_E,    KC_U,    KC_I,                                     KC_D,    KC_H,    KC_T,      KC_N,    KC_S,        KC_MINUS,
+    KC_LSPO,          KC_QUOTE, KC_Q,     KC_J,    KC_K,    KC_X,    KC_LALT,           TD(TAP_MACRO),KC_B,    KC_M,    KC_W,      KC_V,    KC_Z,        KC_RSPC,
+    KC_AT,            KC_HASH,  KC_GRAVE, KC_LEFT, KC_RIGHT,                                                   KC_UP,   KC_DOWN,   KC_HOME, KC_END,      TO(QWERTY),
+                                         ALT_T(KC_APPLICATION), ALL_T(KC_NO),           KC_PGUP, KC_LGUI,
+                                                                   KC_BSLASH,           TO(MAC),
+                                          KC_ENTER, KC_TAB, CTL_T(KC_ESCAPE),           CTL_T(KC_ESCAPE), KC_BSPACE,  KC_SPACE),
+
+  // Layer 1: function and numpad keys.
+  [NUM] = LAYOUT_ergodox_pretty(
+    ___,  KC_F1,   KC_F2,    KC_F3,       KC_F4,       KC_F5,      ___,         ___, KC_F6,   KC_F7,  KC_F8,  KC_F9,      KC_F10,       KC_F11,
+    ___,  KC_EXLM, KC_COMMA, KC_DOT,      KC_MS_BTN1,  KC_MS_BTN2, ___,         ___, KC_UP,   KC_7,   KC_8,   KC_9,       KC_ASTR,      KC_F12,
+    XXX,  ___,     KC_LCBR,  KC_RCBR,     MC_ARROW,    KC_GRAVE,                     KC_DOWN, KC_4,   KC_5,   KC_6,       KC_PLUS,      KC_UNDS,
+    ___,  ___,     KC_CIRC,  KC_LBRACKET, KC_RBRACKET, KC_TILD,    ___,         ___, KC_0,    KC_1,   KC_2,   KC_3,       KC_KP_SLASH,  KC_BSLASH,
+    ___,  ___,     ___,      ___,         ___,                                                ___,    KC_0,   KC_KP_DOT,  KC_EQUAL,     ___,
+                                                           ___,    ___,         KC_KP_ASTERISK, KC_KP_SLASH,
+                                                               KC_LCTL,         ___,
+                                      KC_KP_PLUS,  KC_KP_MINUS, KC_DLR,         KC_DELETE, KC_BSPACE,  KC_SPACE),
+
+  // Layer 2: QWERTY control.
+  [QWERTY] = LAYOUT_ergodox_pretty(
+    /* left hand */
+    KC_EQUAL,   KC_1,     KC_2,         KC_3,     KC_4,     KC_5,    KC_LEFT,           KC_RIGHT,     KC_6,   KC_7,   KC_8,     KC_9,         KC_0,         KC_MINUS,
+    KC_DELETE,  KC_Q,     KC_W,         KC_E,     KC_R,     KC_T,    KC_Y,              TO(BASE),     KC_Y,   KC_U,   KC_I,     KC_O,         KC_P,         KC_BSLASH,
+    MO(NUM),    KC_A,     KC_S,         KC_D,     KC_F,     KC_G,                                     KC_H,   KC_J,   KC_K,     KC_L,         KC_SCLN,      GUI_T(KC_QUOT),
+    KC_LSFT,    KC_Z,     KC_X,         KC_C,     KC_V,     KC_B, ALT_T(KC_NO),         MEH_T(KC_NO), KC_N,   KC_M,   KC_COMMA, KC_DOT,       KC_SLASH,     KC_RSPC,
+    KC_GRAVE,   KC_QUOTE, LALT(KC_TAB), KC_LEFT,  KC_RIGHT,                                                   KC_UP,  KC_DOWN,  KC_LBRACKET,  KC_RBRACKET,  TO(BASE),
+                                                  ___, KC_LGUI,                         ___, KC_ESCAPE,
+                                                       KC_HOME,                         KC_PGUP,
+                                      KC_ENTER, KC_TAB, KC_END,                         KC_PGDOWN, KC_BSPACE, KC_SPACE),
+
+    // Layer 3: Mac layer
+    [MAC] = LAYOUT_ergodox_pretty(
+      /* left hand */
+      ___,  KC_1, KC_2, KC_3,   KC_4,   KC_5, ___,        ___, KC_6,  KC_7, KC_8, KC_9, KC_0, ___,
+      ___,  ___,  ___,  ___,    ___,    ___,  ___,        ___, ___,   ___,  ___,  ___,  ___,  ___,
+      ___,  ___,  ___,  ___,    ___,    ___,                   ___,   ___,  ___,  ___,  ___,  ___,
+      ___,  ___,  ___,  ___,    ___,    ___,  ___,        ___, ___,   ___,  ___,  ___,  ___,  ___,
+      ___,  ___,  ___,  MAC_L,  MAC_R,                                ___,  ___,  ___,  ___,  ___,
+                                        ___,  ___,        ___, ___,
+                                              ___,        TO(BASE),
+                      KC_LGUI,  KC_LALT,  KC_LGUI,        KC_LGUI, KC_LALT, KC_LGUI),
+};
+
+// Whether the macro 1 is currently being recorded.
+static bool is_macro1_recording = false;
+
+// The current set of active layers (as a bitmask).
+// There is a global 'layer_state' variable but it is set after the call
+// to layer_state_set_user().
+static uint32_t current_layer_state = 0;
+uint32_t layer_state_set_user(uint32_t state);
+
+// Method called at the end of the tap dance on the TAP_MACRO key. That key is
+// used to start recording a macro (double tap or more), to stop recording (any
+// number of tap), or to play the recorded macro (1 tap).
+void macro_tapdance_fn(qk_tap_dance_state_t *state, void *user_data) {
+  uint16_t keycode;
+  keyrecord_t record;
+  dprintf("macro_tap_dance_fn %d\n", state->count);
+  if (is_macro1_recording) {
+    keycode = DYN_REC_STOP;
+    is_macro1_recording = false;
+    layer_state_set_user(current_layer_state);
+  } else if (state->count == 1) {
+    keycode = DYN_MACRO_PLAY1;
+  } else {
+    keycode = DYN_REC_START1;
+    is_macro1_recording = true;
+    layer_state_set_user(current_layer_state);
+  }
+
+  record.event.pressed = true;
+  process_record_dynamic_macro(keycode, &record);
+  record.event.pressed = false;
+  process_record_dynamic_macro(keycode, &record);
+}
+
+// The definition of the tap dance actions:
+qk_tap_dance_action_t tap_dance_actions[] = {
+  // This Tap dance plays the macro 1 on TAP and records it on double tap.
+  [TAP_MACRO] = ACTION_TAP_DANCE_FN(macro_tapdance_fn)
+};
+
+// Runs for each key down or up event.
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (keycode != TD(TAP_MACRO)) {
+    // That key is processed by the macro_tapdance_fn. Not ignoring it here is
+    // mostly a no-op except that it is recorded in the macros (and uses space).
+    // We can't just return false when the key is a tap dance, because
+    // process_record_user, is called before the tap dance processing (and
+    // returning false would eat the tap dance).
+    if (!process_record_dynamic_macro(keycode, record)) {
+      return false;
+    }
+
+    if(record->event.pressed) {
+      switch(keycode) {
+        case MC_ARROW:
+          SEND_STRING("=>");
+          return false;
+          break;
+      }
+    }
+  }
+
+  return true; // Let QMK send the enter press/release events
+}
+
+// Runs just one time when the keyboard initializes.
+void matrix_init_user(void) {
+  ergodox_right_led_1_off();
+  ergodox_right_led_2_off();
+  ergodox_right_led_3_off();
+};
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+
+};
+
+// Value to use to switch LEDs on. The default value of 255 is far too bright.
+static const uint8_t max_led_value = 20;
+
+// Whether the given layer (one of the constant defined at the top) is active.
+#define LAYER_ON(layer) (current_layer_state & (1<<layer))
+
+void led_1_on(void) {
+  ergodox_right_led_1_on();
+  ergodox_right_led_1_set(max_led_value);
+}
+
+void led_2_on(void) {
+  ergodox_right_led_2_on();
+  ergodox_right_led_2_set(max_led_value);
+}
+
+void led_3_on(void) {
+  ergodox_right_led_3_on();
+  ergodox_right_led_3_set(max_led_value);
+}
+
+void led_1_off(void) {
+  ergodox_right_led_1_off();
+}
+
+void led_2_off(void) {
+  ergodox_right_led_2_off();
+}
+
+void led_3_off(void) {
+  ergodox_right_led_3_off();
+}
+
+uint32_t layer_state_set_user(uint32_t state) {
+  current_layer_state = state;
+
+  if (is_macro1_recording) {
+    led_1_on();
+    led_2_on();
+    led_3_on();
+    return state;
+  }
+
+  if (LAYER_ON(NUM)) {
+    led_1_on();
+  } else {
+    led_1_off();
+  }
+
+  if (LAYER_ON(MAC)) {
+    led_2_on();
+  } else {
+    led_2_off();
+  }
+
+  if (LAYER_ON(QWERTY)) {
+    led_3_on();
+  } else {
+    led_3_off();
+  }
+
+  return state;
+};

keyboards/ergodox_ez/keymaps/bpruitt-goddard/readme.md

@@ -0,0 +1,23 @@
+# Ergodox EZ Layout by bpruitt-goddard
+![Layout Image](https://i.imgur.com/kVPmpFG.png)
+
+[KLE link](http://www.keyboard-layout-editor.com/#/gists/5896c5a729a64633d3f63de71e7e0e79)
+
+## Layers
+| Layer | Legend |
+| ----- | ------ |
+| Base  |  Top (black) |
+| Num | Center (blue) |
+| QWERTY | Bottom (Red) |
+| MAC | Front/Bottom-most (Yellow) |
+
+## Features
+* Tap-dance dynamic macro key.
+  * Tap twice for starting macro. Then tap once to complete the macro
+  * Tap one for replaying macro
+* Numpad on right hand with momentary Num layer
+* QWERTY layer for non-dvorak users
+* Mac layer for changing thumbpad modifier keys with Command
+* Uses the following dual function keys
+    * Space Cadet shifts (shift/paren)
+    * Ctrl/Esc

keyboards/ergodox_ez/keymaps/bpruitt-goddard/rules.mk

@@ -0,0 +1,15 @@
+MOUSEKEY_ENABLE  = yes # Mouse keys
+EXTRAKEY_ENABLE  = yes # Audio control and System control
+COMMAND_ENABLE   = yes # Commands for debug and configuration
+NKRO_ENABLE      = yes # USB Nkey Rollover - for issues, see github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+ONEHAND_ENABLE   = yes # Allow swapping hands of keyboard
+KEY_LOCK_ENABLE  = yes # Enable the KC_LOCK key
+TAP_DANCE_ENABLE = yes # Enable the tap dance feature.
+CONSOLE_ENABLE   = yes  # Console for debug
+
+BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration
+UNICODE_ENABLE   = no
+SLEEP_LED_ENABLE = no
+API_SYSEX_ENABLE = no
+RGBLIGHT_ENABLE = no
+RGBLIGHT_ANIMATION = no

keyboards/ergodox_infinity/keymaps/gordon/config.h

@@ -0,0 +1,31 @@
+/*
+Copyright 2018 Daniel Gordon <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#define PREVENT_STUCK_MODIFIERS
+
+#undef  IGNORE_MOD_TAP_INTERRUPT
+#define IGNORE_MOD_TAP_INTERRUPT
+
+#undef  PERMISSIVE_HOLD
+// #define PERMISSIVE_HOLD
+
+#define ONESHOT_TAP_TOGGLE       2
+
+#undef  TAPPING_TERM
+#define TAPPING_TERM             200
+
+#define FORCE_NKRO

keyboards/ergodox_infinity/keymaps/gordon/keymap.c

@@ -10,16 +10,6 @@
 #include "keymap_nordic.h"
 
 
-#define TLSLSH   M(TIL_SLASH)
-#define F1_F13   TD(F1F13)
-#define F2_F14   TD(F2F14)
-#define F5_F15   TD(F5F15)
-#define F4_ALTF4 TD(ALTF4)
-#define END_ESC  TD(ENDESC)
-#define SHF6_AF7 TD(F6F7)
-#define F12_RUN  TD(F12ETAPS)
-#define COMMA_TD TD(COMMA)
-
 enum custom_keycodes {
   PLACEHOLDER = SAFE_RANGE, // can always be here
   EPRM,
@@ -27,129 +17,94 @@ enum custom_keycodes {
   RGB_SLD,
 };
 
-//Tap dance enums
-enum {
-  F12TAP = 0,
-  F12ETAPS,
-  CALCCOMP,
-  REFRESH, //send R, or Control+R if double tapped.
-  ENDESC,
-  XESC, //'quad function'. x, control, escape, alt
-  ALY2, //'quad function': a, Hyper, ctrl+a, layer 2
-  PRLOCK,
-  F6F7, // Shift F6 or Alt F7
-  TABCOMBO,
-  FCTRL,
-  F3D,
-  ALTF4,
-  COMMA,
-  AT,
-  HTAB,
-  F1F13,
-  F2F14,
-  F5F15
-};
-
-
 
 // Custom tapping terms for each key.
 // Requires changes to action_taping.c
-/* uint16_t get_tapping_term(keyevent_t* event) {
+// uint16_t get_tapping_term(keyevent_t* event) {
-    uint16_t keycode = keymap_key_to_keycode(layer_switch_get_layer(event->key), event->key);
+//     uint16_t keycode = keymap_key_to_keycode(layer_switch_get_layer(event->key), event->key);
-    if (keycode == LT(3,KC_E) ) {
+//     if (keycode == NAV_E ) {
-        return TAPPING_TERM + 50;
+//         return TAPPING_TERM + 50;
-    }
+//     }
-    return TAPPING_TERM;
+//     return TAPPING_TERM;
-} */
+// }
 
-            
+
-// Tap Dance Definitions
+// _XXXXXX_ is a symbol that means, "DO NOT ASSIGN THIS KEY TO ANTYING", because the key
-qk_tap_dance_action_t tap_dance_actions[] = {
+//        underneath this layer is the key that sends you to/from this layer.
-  // simple tap dance
+//        Meaning, if you were to put something here - then you will be stuck in this layer.
-  [F12ETAPS] = ACTION_TAP_DANCE_DOUBLE(KC_F12,LSFT(LCTL(KC_F10))),  
+//        It is simply a visual reminder not to use that key for this layer.
-  [REFRESH] = ACTION_TAP_DANCE_DOUBLE(KC_R,LCTL(KC_R)),
+//        Example: On the numpad layer, under the letter `D` is `_XXXXXXX_`, because pressing and holding
-  [ENDESC] = ACTION_TAP_DANCE_DOUBLE(KC_END, KC_ESC),
+//          `D` sends you to the numpad layer
-  [CALCCOMP] = ACTION_TAP_DANCE_DOUBLE(KC_CALCULATOR, KC_MY_COMPUTER),
-  [ALTF4] = ACTION_TAP_DANCE_DOUBLE(KC_F4,LALT(KC_F4)),
-  [F6F7] = ACTION_TAP_DANCE_DOUBLE(LSFT(KC_F6), LALT(KC_F7)),
-  [F1F13] = ACTION_TAP_DANCE_DOUBLE(KC_F1, KC_F13),
-  [F2F14] = ACTION_TAP_DANCE_DOUBLE(KC_F2, KC_F14),
-  [F5F15] = ACTION_TAP_DANCE_DOUBLE(KC_F5, KC_F15),
-  [TABCOMBO] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, tab_finished, tab_reset),
-  [F3D] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, bt_finished, bt_reset),
-  [COMMA] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, comma_finished, comma_reset),
-  [HTAB] = ACTION_TAP_DANCE_FN_ADVANCED(NULL,h_finished, h_reset)
-};
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 
-//**************************FIRST LAYER - LAYER ZERO ************************************** 
+//**************************FIRST LAYER - LAYER ZERO **************************************
   [_QWERTY] = KEYMAP(
 
-    SHF6_AF7,   F1_F13,    F2_F14,   TD(F3D), F4_ALTF4,    F5_F15,   KC_F11,
+    SHF6_AF7, F1_F13  ,    F2_F14,   TD(F3D), F4_ALTF4,    F5_F15,   KC_F11,
-    ________,     KC_Q,  CTR_SH_W,     NAV_E, CTR_AL_R,      KC_T, PRINTSCR,
+    SPRK_TCK  , Q_ESC   ,  CTR_SH_W,     NAV_E, ALT_SH_R,      KC_T, PRINTSCR,
-      KC_TAB,     KC_A,     MEH_S,  NUMPAD_D,   CTRL_F,     WIN_G,
+    KC_TAB  , KC_A    ,     MEH_S,  NUMPAD_D,   CTRL_F,     WIN_G,
-    ALT_SHFT,   CTRL_Z,   HYPER_X,   MOUSE_C,    ALT_V,      KC_B, TT(_MOUSE),
+    OSL(_ONESHOT), CTRL_Z  ,   HYPER_X,   MOUSE_C,    ALT_V,      KC_B, OSL(_MOUSE),
     KC_MINUS, KC_GRAVE, KC_DELETE,   KC_LEFT, KC_RIGHT,
-                                    
+
-                                              KC_INSERT,  KC_DELETE, 
+                                              LSFT(KC_INSERT),  TT(_QWERTY_KIDS),
-                                                           ALT_HOME,
+                                                          ________ ,
-                                    KC_LSHIFT, SYMB_BSP,    END_ESC,
+                                    KC_LSHIFT, SYMB_BSP,  KC_INSERT   ,
 
                  F12_RUN,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10, TD(CALCCOMP),
-                ________,     KC_Y,     KC_U,     KC_I,     KC_O,      KC_P,  ________,
+                CALTDEL ,    KC_Y,      KC_U,     KC_I,     KC_O,      KC_P,  MODRESET,
-                             WIN_H,   CTRL_J,     KC_K,    MEH_L,  COL_MOUS,  ________,
+                             WIN_H,   CTRL_J, APP_SW_K,    MEH_L,  COL_MOUS, END_HOME,
-                 KC_LEAD,     KC_N,    ALT_M, COMMA_TD, HYPE_DOT,  KC_SLASH, TD(TABCOMBO),
+             OSL(_ONESHOT),     KC_N,  ALT_M, COMMA_TD, HYPE_DOT,  KC_SLASH, ID_MAN_IP,
-                                       KC_UP,  KC_DOWN,   KC_ESC,    KC_TILD,    KC_UNDS,
+                                       KC_UP,  KC_DOWN,KC_DELETE,    KC_TILD,    KC_UNDS,
 
-  KC_ESCAPE,  KC_DELETE,
+  TT(_STREET_FIGHTER),  ________,
-         ALT_T(KC_PGUP),
+         KC_PGUP,
-  RCTL_T(KC_PGDOWN), LT(_NAV,KC_ENTER), SPAC_SYM),
+  KC_PGDOWN, LT(_NAV,KC_ENTER), SPAC_TXT),
 
 
   //**************************SYMBOLS LAYER**************************
   [_SYMBOLS] = KEYMAP(
     ________, ________, ________, ________, ________, ________,  ________,
-    ________,   TLSLSH,    KC_AT,  KC_LCBR,  KC_RCBR,  KC_CIRC,  ________,
+    ________, DEREF   ,    KC_AT,  KC_LCBR,  KC_RCBR,  KC_CIRC,  ________,
-    ________,  KC_EXLM,  KC_PIPE,  KC_LPRN,  KC_RPRN, M(DEREF),
+    ________,  KC_EXLM,  KC_HASH,  KC_LPRN,  KC_RPRN,  ________,
     ________,KC_DOLLAR,  KC_PERC, LSQUIGLY, RSQUIGLY, ________,  ________,
-    ________,  M(TICK3),  ________,  ________,  ________,  
+    ________,TICK3    ,  ________,  ________,  ________,
 
                                     ________,________,
                                              ________,
-                           ________,________,________,
+                           ________,_XXXXXX_,________,
 
 
                   ________, ________, ________, ________, ________, ________, NUMLOCK,
-                  ________,   TLSLSH,  KC_PIPE,  KC_PLUS,  KC_AMPR, ________, CAPLOCK,
+                  ________,TIL_SLASH,  KC_PIPE,  KC_PLUS,  KC_AMPR, ________, CAPLOCK,
-                          M(EQRIGHT),  KC_DQUO, KC_EQUAL, KC_QUOTE,KC_SCOLON, ________,
+                             EQRIGHT,  KC_DQUO, KC_EQUAL, KC_QUOTE,KC_SCOLON, ________,
-                  ________,  KC_PIPE, BK_SLASH,  ASTERSK,   KC_DOT, KC_SLASH, ________,
+                  ________, KC_M, BK_SLASH,  ASTERSK,   KC_DOT, KC_SLASH, ________,
-                  ________,________,________,M(TILD3),________,
+                  ________,________ ,________,TILD3,________,
                                                               ________,________,
                                                                        ________,
-                                                     ________,________,________),
+                                                     ________,________,_XXXXXX_),
-  
+
   //**************************MOUSE MOVEMENT LAYER**************************
-  [_MOUSE] = KEYMAP(RESET,________,________,________,________,________,________,
+  [_MOUSE] = KEYMAP(UP_ENTER_RESET,________,________,________,________,________,MODRESET,
-                    RESET,________,________,KC_MS_UP,________,KC_MS_WH_UP,CALTDEL,
+                    RESET,KC_SECRET_5,________,KC_MS_UP,KC_SECRET_4,KC_MS_WH_UP,________,
                     ________,________,KC_MS_LEFT,KC_MS_DOWN,KC_MS_RIGHT,KC_MS_WH_DOWN,
-                    KC_SECRET_1,________,HYPR(KC_F13),________,HYPR(KC_F14),KC_SECRET_2,________,
+                    KC_SECRET_5,KC_SECRET_4,KC_SECRET_3,_XXXXXX_,KC_SECRET_2,KC_SECRET_1,_XXXXXX_,
                     ________,________,HYPR(KC_F15),KC_MS_WH_LEFT,KC_MS_WH_RIGHT,
-                    
+
                                                        ________,________,
                                                                 ________,
                                           KC_MS_BTN1,KC_MS_BTN2,________,
-                                          
+
-                                         
+
                     ________,________,________,________,________,________,________,
-                    KC_MS_WH_UP,________,________,KC_UP,________,________,________,
+                    ________,________,________,KC_UP,________,KC_MEDIA_PLAY_PAUSE,________,
-                    ________,KC_LEFT,KC_DOWN,KC_RIGHT,________,________,
+                    ________,KC_LEFT,KC_DOWN,KC_RIGHT,_XXXXXX_,________,
-                    KC_MS_WH_DOWN,________,KC_PGUP,KC_PGDOWN,KC_MEDIA_NEXT_TRACK,________,________,
+                    ________,KC_MEDIA_NEXT_TRACK,KC_AUDIO_VOL_UP,KC_AUDIO_VOL_DOWN,KC_MUTE,________,________,
-                    KC_AUDIO_VOL_UP,KC_AUDIO_VOL_DOWN,KC_AUDIO_MUTE,KC_MEDIA_PLAY_PAUSE,________,
+                    KC_MS_WH_UP,KC_MS_WH_DOWN,________,________,________,
                     ________,________,
                     ________,
-                    ________,________,KC_WWW_BACK),
+                    ________,KC_WWW_BACK,KC_WWW_FORWARD),
 
 
 
@@ -157,23 +112,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //**************************WINDOWS NAVIGATION LAYER**************************
 
   [_NAV] = KEYMAP(________,________,________,________,________,________,________,
-                  ________,________,SNAPLEFT,________,SNAPRGHT,LALT(KC_LEFT),________,
+                  ________,________,SNAPLEFT,_XXXXXX_,SNAPRGHT,________,________,
-                  ________,LCTL(KC_W),PREVTAB,LGUI(KC_D),NEXTTAB,________,
+                  ________,KC_WWW_BACK,PREVTAB,________,NEXTTAB,SNAPUP,
-                  ________,________,WORKLEFT,________,WORKRIGHT,________,________,
+                  ________,________,WORKLEFT,________,WORKRIGHT,SNAPDOWN,________,
                   ________,________,________,________,________,
-                  
+
                   ________,________,
                            ________,
-         ________,________,________, 
+         ________,________,________,
-         
+
-         
+
          ________,________,________,________,________,________,________,
          ________,________,SNAPUP  ,KC_UP   ,SNAPDOWN,________,________,
                   ________,KC_LEFT ,KC_DOWN ,KC_RIGHT,________,________,
          ________,________,________,________,________,________,________,
          ________,________,________,________,________,
-         
+
-         
+
          ________,________,
          ________,
          ________,________,________),
@@ -181,95 +136,207 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //****************************NUMPAD LAYER****************************
   [_NUMPAD] = KEYMAP(________,________,________,________,________,________,________,
                      ________,________,________,________,________,________,________,
-                     ________,________,________,________,________,________,
+                     ________,KC_DOT  ,KC_SPACE,_XXXXXX_, KC_ESC ,________,
-                     ________,________,________,________,________,________,________,
+                     ________,DBMS_OUT,________,________,________,________,________,
                      ________,________,________,________,________,
-                     
+
                      ________,________,
                      ________,
-                     ________,________,________,
+                     KC_PLUS,KC_MINUS,________,
-                     
+
                      BL_TOGG ,BL_STEP ,________,________,________,________,________,
                      ________,________,KC_7    ,KC_8    ,KC_9    ,________,________,
                               ________,KC_4    ,KC_5    ,KC_6    ,________,________,
-                     ________,________,KC_1    ,KC_2    ,KC_3    ,________,________,
+                     ________,KC_DOT,  KC_1    ,KC_2    ,KC_3    ,________,________,
-                                       KC_0    ,KC_0 ,  KC_DOT   ,________,________,
+                                       KC_0    ,KC_DOT ,  KC_DOT   ,________,________,
-                                       
+
                                        ________,________,
                                        ________,
                                        ________,________,KC_0),
+
+  //****************************APP SWITCH LAYER****************************
+  [_APPSWITCH] = KEYMAP(________,________,________,________,________,________,________,
+                        ________,________   ,  ________ , ________  ,________   ,________,________,
+                        ________,APP_5,APP_6,APP_7,APP_8,________,
+                        ________,DBMS_OUT,________,________,________,________,________,
+                        ________,________,________,________,________,
+
+                                                                  ________,________,
+                                                                           ________,
+                                                         KC_PLUS,________,________,
+
+                     ________,________,________,________,________,________,________,
+                     ________,________,APP_3   ,________,APP_4   ,________,________,
+                              ________,APP_1   ,_XXXXXX_,APP_2   ,________,________,
+                     ________,________,________,________,________,________,________,
+                                       ________,________,________,________,________,
+
+                    ________,________,
+                    ________,
+                    ________,________,________),
+
+
+  [_ONESHOT] = KEYMAP(  UP_ENTER_RESET , ________, ________, ________, ________, ________, ________,
+                        ________, ________, ________, KC_UP   , ________, ________, ________,
+                        ________, ________, KC_LEFT , KC_DOWN , KC_RIGHT, ________,
+                        MAGIC_TOGGLE_NKRO, ________, ________, ________, ________, ________, ________,
+                        ________, ________, ________, ________, ________,
+
+                        ________, ________,
+                        ________,
+                        ________, ________, ________,
+
+                        ________, ________, ________, ________, ________, ________, ________,
+                        ________, ________, KC_7, KC_8, KC_9, KC_PLUS, ________,
+                                  ________, KC_4, KC_5, KC_6, KC_EQUAL, ________,
+                        ________, ________, KC_1, KC_2, KC_3, KC_ASTR, ________,
+                        ________, ________, KC_0, ________, ________,
+
+                        ________, ________,
+                        ________,
+                        ________, ________, ________),
   //****************************TEXT/INTELLIJ NAVIGATION LAYER****************************
   [_TEXTNAV] = KEYMAP(________,________,________,________,________,________,________,
                       ________,MEH(KC_Q),LSFT(KC_ESCAPE),MEH(KC_D),MEH(KC_2),LALT(LSFT(KC_UP)),________,
-                      ________,LALT(KC_F7),LCTL(KC_LEFT),LCTL(KC_B),LCTL(KC_RIGHT),LALT(LSFT(KC_DOWN)),
+                      ________,________,LCTL(KC_LEFT),LCTL(KC_B),LCTL(KC_RIGHT),LALT(LSFT(KC_DOWN)),
-                      ________,________,________,LCTL(LSFT(KC_COMMA)),MEH(KC_DOT),LALT(KC_MS_WH_UP),________,________,________,________,________,________,________,________,________,________,LCTL(KC_DELETE),________,LALT(LSFT(KC_F9)),________,________,________,________,________,________,________,MEH(KC_5),LALT(LSFT(KC_Z)),________,LALT(KC_Z),________,________,________,LCTL(LSFT(KC_LEFT)),LALT(LCTL(KC_S)),LCTL(LSFT(KC_RIGHT)),LCTL(LSFT(KC_COMMA)),________,________,________,________,________,________,________,________,________,________,________,________,________,________,________,________,________,________,________)
+                      ________,________,________,LCTL(LSFT(KC_COMMA)),MEH(KC_DOT),LALT(KC_MS_WH_UP),________,
+                      ________,________,________,________,________,
+
+                      ________,________,________,________,________,________,
+
+                      LALT(LSFT(KC_F9)),________,________,________,________,________,________,________,MEH(KC_5),LALT(LSFT(KC_Z)),
+                      ________,LALT(KC_Z),________,________,________,LCTL(LSFT(KC_LEFT)),LALT(LCTL(KC_S)),LCTL(LSFT(KC_RIGHT)),
+                      LCTL(LSFT(KC_COMMA)),________,________,________,________,________,________,________,________,________,
+                      ________,________,________,________,________,________,________,________,________,_XXXXXX_),
+  [_QWERTY_KIDS] = KEYMAP(
+
+      KC_NO ,   KC_NO  , KC_NO ,     KC_NO ,   KC_NO ,      KC_NO ,     KC_NO ,
+      KC_NO ,   KC_Q   , KC_W,     KC_E, KC_R,      KC_T,   KC_NO ,
+      KC_NO ,   KC_A   , KC_S,  KC_D,   KC_F,       KC_G ,
+      KC_NO ,   KC_Z   ,   KC_X,   KC_C,    KC_V,      KC_B,   KC_NO ,
+    KC_MINUS, KC_GRAVE, KC_DELETE,   KC_LEFT, KC_RIGHT,
+
+                                                KC_NO ,    TT(_QWERTY_KIDS) ,
+                                                            KC_NO  ,
+                                    KC_LSHIFT, KC_BSPACE,    KC_NO    ,
+
+                   KC_NO ,      KC_NO ,      KC_NO ,      KC_NO ,      KC_NO ,      KC_NO ,   KC_NO ,
+                  KC_NO  ,    KC_Y,      KC_U, KC_I,     KC_O,      KC_P,    KC_NO ,
+                             KC_H,   KC_J,     KC_K,    KC_L,    KC_SCOLON , KC_NO,
+               KC_NO ,     KC_N,    KC_M,   KC_COMMA ,   KC_DOT ,  KC_SLASH,   KC_NO ,
+                                       KC_UP,  KC_DOWN,   KC_DELETE,    KC_TILD,    KC_UNDS,
+
+    KC_NO ,    KC_NO ,
+         KC_NO,
+  KC_NO, KC_ENTER, KC_SPACE),
+
+  [_STREET_FIGHTER] = KEYMAP(
+
+      KC_NO ,   KC_NO  , KC_NO ,     KC_NO ,   KC_NO ,      KC_NO ,     KC_NO ,
+      KC_NO ,   KC_NO   , DIE_1000X_LEFT,     KC_UP, DIE_1000X_RIGHT,      KC_NO,   KC_NO ,
+      KC_NO ,   KC_NO   , KC_LEFT,  KC_DOWN,   KC_RIGHT,       KC_NO ,
+      KC_NO ,   KC_NO   ,   KC_NO,   KC_NO,    KC_NO,      KC_NO,   KC_NO ,
+    KC_NO, KC_NO, KC_NO,   KC_NO, KC_NO,
+
+                                                ________ ,    ________ ,
+                                                            ________  ,
+                                    ________, ________,    ________    ,
+
+                   KC_NO,  KC_NO ,      KC_NO ,      KC_NO , KC_NO ,   KC_NO , KC_NO ,
+                  KC_NO  , KC_NO,      KC_G, KC_H,     KC_J,      KC_NO,    KC_NO ,
+                             KC_NO,   KC_B,     KC_N,    KC_M,    KC_K , KC_NO,
+               KC_NO ,     KC_NO,    KC_NO,   KC_NO ,   KC_NO ,  KC_NO,   KC_NO ,
+                                       KC_NO,  KC_NO,   KC_NO,    KC_NO,    KC_NO,
+
+    TT(_STREET_FIGHTER) ,    ________ ,
+         ________,
+  ________, ________, ________),
+
+
+  //************************Windows navigation to directories*************************
+  [_DIRNAV] = KEYMAP(
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,________,________,
+         ________,________,KC_A,________,________,________,
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,
+
+                  ________,________,
+                           ________,
+         ________,________,________,
+
+
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,________,________,
+                  ________,________,_______,________,________,________,
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,
+
+
+         ________,________,
+         ________,
+         ________,________,________),
+
+
+  [_TEXT_MACROS] = KEYMAP(
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,________,________,
+         ________,________,KC_A,________,________,________,
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,
+
+                  ________,________,
+                           ________,
+         ________,________,________,
+
+
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,________,________,
+                  ________,________,_______,________,________,________,
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,
+
+
+         ________,________,
+         ________,
+         ________,________,________)
+
+
+/* FOR FORMATTING FUTURE LAYERS
+   NO KEY CODES SHOULD BE MORE THAN 8 CHARACTERS
+   GOES LEFT HAND THEN RIGHT HAND
+  [_DIRNAV] = KEYMAP(
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,________,
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,
+
+                  ________,________,
+                           ________,
+         ________,________,________,
+
+
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,________,________,
+                  ________,________,________,________,________,________,
+         ________,________,________,________,________,________,________,
+         ________,________,________,________,________,
+
+
+         ________,________,
+         ________,
+         ________,________,________), */
+
+
+
+
 };
 
 const uint16_t PROGMEM fn_actions[] = {
   [1] = ACTION_LAYER_TAP_TOGGLE(1)
 };
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-      switch(id) {
-        case INFOQM: {
-          if (record->event.pressed) {
-            SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
-          }
-          break;
-        }
-
-        case TIL_SLASH: {
-          if (record->event.pressed) {
-            SEND_STRING ("~/.");
-          }
-          break;
-        }
-
-        case DEREF: {
-          if (record->event.pressed) {
-            SEND_STRING ("->");
-          }
-          break;
-        }
-        
-        case EQRIGHT: {
-          if (record->event.pressed) {
-            SEND_STRING ("=>");
-          }
-          break;
-        }
-
-        case TICK3: {
-          if (record->event.pressed) {
-            SEND_STRING ("```");
-          }
-          break;
-        }
-
-        case TILD3: {
-          if (record->event.pressed) {
-            SEND_STRING ("~~~");
-          }
-          break;
-        }
-
-        case ALTTAB_START: {
-          register_code(KC_LALT);
-          layer_on(8);
-        }
-
-        case ALTTAB_END: {
-          unregister_code(KC_LALT);
-          layer_off(8);
-        }
-
-
-
-      }
-      return MACRO_NONE;
-};
-
 void matrix_scan_user(void) {
 
     uint8_t layer = biton32(layer_state);
@@ -281,35 +348,51 @@ void matrix_scan_user(void) {
     ergodox_right_led_1_off();
     ergodox_right_led_2_off();
     ergodox_right_led_3_off();
-    switch (layer) {
+   //    _delay_ms(45);
-        case _SYMBOLS:
-            ergodox_right_led_1_on();
-            break;
-        case _MOUSE:
-            ergodox_right_led_2_on();
-            break;
-        case _NUMPAD:
-            ergodox_right_led_3_on();
-            break;
-        case _NAV:
-            ergodox_right_led_1_on();
-            ergodox_right_led_2_on();
-            break;
-        case 5:
-            ergodox_right_led_1_on();
-            ergodox_right_led_3_on();
-            break;
-        case 6:
-            ergodox_right_led_2_on();
-            ergodox_right_led_3_on();
-            break;
-        case 7:
-            ergodox_right_led_1_on();
-            ergodox_right_led_2_on();
-            ergodox_right_led_3_on();
-            break;
-        default:
-            break;
-    }
 
+    switch (layer)
+    {
+    case _SYMBOLS:
+      ergodox_right_led_1_on();
+      break;
+    case _MOUSE:
+      ergodox_right_led_2_on();
+      break;
+    case _NUMPAD:
+      ergodox_right_led_3_on();
+      break;
+    case _NAV:
+      ergodox_right_led_1_on();
+      ergodox_right_led_2_on();
+      break;
+    case _MACROS:
+      //layer unused right now
+      break;
+    case _FUNCTION:
+      //layer unused right nowex
+      break;
+    case _APPSWITCH:
+      ergodox_right_led_2_on();
+      ergodox_right_led_3_on();
+      break;
+    case _ONESHOT:
+      ergodox_right_led_1_on();
+      ergodox_right_led_2_on();
+      ergodox_right_led_3_on();
+      break;
+    case _TEXTNAV:
+      ergodox_right_led_1_on();
+      ergodox_right_led_3_on();
+      break;
+    case _QWERTY_KIDS:
+      ergodox_right_led_1_on();
+      ergodox_right_led_2_on();
+      ergodox_right_led_3_on();
+      break;
+    case _STREET_FIGHTER:
+      ergodox_right_led_2_on();
+      ergodox_right_led_3_on();
+    default:
+      break;
+    }
 };

keyboards/ergodox_infinity/keymaps/gordon/rules.mk

@@ -0,0 +1,2 @@
+TAP_DANCE_ENABLE = yes
+

keyboards/fortitude60/config.h

@@ -0,0 +1,23 @@
+/*
+Copyright 2017 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+#endif  // CONFIG_H

keyboards/fortitude60/fortitude60.c

@@ -0,0 +1 @@
+#include "fortitude60.h"

keyboards/fortitude60/fortitude60.h

@@ -0,0 +1,26 @@
+#ifndef FORTITUDE60_H
+#define FORTITUDE60_H
+
+#ifdef KEYBOARD_fortitude60_rev1
+    #include "rev1.h"
+#endif
+
+#include "quantum.h"
+
+// Used to create a keymap using only KC_ prefixed keys
+#define LAYOUT_kc( \
+    L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
+    L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \
+    L20, L21, L22, L23, L24, L25,           R20, R21, R22, R23, R24, R25, \
+    L30, L31, L32, L33, L34, L35, LT5, RT5, R30, R31, R32, R33, R34, R35, \
+              LT0, LT1, LT2, LT3, LT4, RT4, RT3, RT2, RT1, RT0 \
+    ) \
+    LAYOUT( \
+        KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05,                     KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
+        KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15,                     KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
+        KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25,                     KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
+        KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##LT5, KC_##RT5, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35, \
+                            KC_##LT0, KC_##LT1, KC_##LT2, KC_##LT3, KC_##LT4, KC_##RT4, KC_##RT3, KC_##RT2, KC_##RT1, KC_##RT0 \
+    )
+
+#endif

keyboards/fortitude60/keymaps/default/config.h

@@ -0,0 +1,39 @@
+/*
+Copyright 2017 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+#define USE_SERIAL
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+#define USE_SERIAL_PD2
+/* #undef RGBLED_NUM */
+/* #define RGBLIGHT_ANIMATIONS */
+/* #define RGBLED_NUM 12 */
+/* #define RGBLIGHT_HUE_STEP 8 */
+/* #define RGBLIGHT_SAT_STEP 8 */
+/* #define RGBLIGHT_VAL_STEP 8 */
+
+#endif

keyboards/fortitude60/keymaps/default/keymap.c

@@ -0,0 +1,189 @@
+#include QMK_KEYBOARD_H
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------.             ,-----------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |             |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |             |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   [  |   ]  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
+ *               |  GUI | Ctrl |Lower |Space | Ctrl |Enter |Space |Raise |  Alt |  GUI |
+ *               `---------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                   KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                   KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B, KC_LBRC, KC_RBRC, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+                 KC_LGUI, KC_LALT,   LOWER,  KC_SPC, KC_LCTL,  KC_ENT, KC_SPC, RAISE,    KC_RALT, KC_RGUI\
+),
+
+/* Colemak
+ * ,-----------------------------------------.             ,-----------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |             |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |             |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   [  |   ]  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
+ *               |  GUI | Ctrl |Lower |Space | Ctrl |Enter |Space |Raise |  Alt | GUI |
+ *               `---------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,                   KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,                   KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B, KC_LBRC, KC_RBRC, KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+                 KC_LGUI, KC_LALT,   LOWER,  KC_SPC, KC_LCTL,  KC_ENT, KC_SPC, RAISE,    KC_RALT, KC_RGUI\
+),
+
+/* Dvorak
+ * ,-----------------------------------------.             ,-----------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |             |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |             |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   [  |   ]  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
+ *               |  GUI | Ctrl |Lower |Space | Ctrl |Enter |Space |Raise |  Alt |  GUI |
+ *               `---------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,                   KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,                   KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X, KC_LBRC, KC_RBRC, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
+                 KC_LGUI, KC_LALT,   LOWER,  KC_SPC, KC_LCTL,  KC_ENT, KC_SPC, RAISE,    KC_RALT, KC_RGUI\
+),
+
+/* Lower
+ * ,-----------------------------------------.             ,-----------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  |      |
+ * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |             |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+------|             |------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   _  |   +  |      |   \  |  |   |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |ISO ~ |ISO | |      |      |      |
+ * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
+ *               |      |      |      |      |      |      |      |      |      |      |
+ *               `---------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                   KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                     KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______,\
+                    _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______\
+),
+
+/* Raise
+ * ,-----------------------------------------.             ,-----------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+------.             ,------+------+------+------+------+------|
+ * |   `  |   1  |   2  |   3  |   4  |   5  |             |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------.             ,------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |             |  F6  |   -  |   =  |   [  |   ]  |  |   |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |      |  F12 |ISO # |ISO / |      |      |      |
+ * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
+ *               |      |      |      |      |      |      |      |      |      |      |
+ *               `---------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                       KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  \
+  KC_GRV,  KC_1,    KC_UP,   KC_3,    KC_4,    KC_5,                       KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_DEL,  KC_LEFT, KC_DOWN, KC_RGHT, KC_F4,   KC_F5,                      KC_F6,KC_MINS,  KC_EQL, KC_LBRC, KC_RBRC,    KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  _______, _______,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+                    _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______\
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------.             ,-----------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |             |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------.             ,------+------+------+------+------+------|
+ * |      | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|             |Sat Up|Sat Dn|Val Up|Val Dn|      | Bksp |
+ * |------+------+------+------+------+------.             ,------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|             |AGswap|      |BL TOG|BL STP|      |      |
+ * |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
+ * |Qwerty|Colemk|Dvorak|      |      |      |      |      |      |      |      |      |      |      |
+ * `-------------+------+------+------+------+------+------+------+------+------+------+-------------'
+ *               |      |      |      |      |      |      |      |      |      |      |
+ *               `---------------------------------------------------------------------'
+ */
+[_ADJUST] =  LAYOUT( \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                     KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+  _______, RESET  , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI,                   RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, KC_BSPC, \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM,                   AG_SWAP, _______, BL_TOGG, BL_STEP, _______, _______, \
+  QWERTY,  COLEMAK, DVORAK,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______\
+)
+
+
+};
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/fortitude60/keymaps/default/rules.mk

@@ -0,0 +1 @@
+RGBLIGHT_ENABLE = no

keyboards/fortitude60/matrix.c

@@ -0,0 +1,423 @@
+/*
+Copyright 2017 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+#include "timer.h"
+
+#ifdef BACKLIGHT_ENABLE
+#include "backlight.h"
+extern backlight_config_t backlight_config;
+#endif
+
+#include "serial.h"
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#else
+#    error "Currently only supports 8 COLS"
+#endif
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#define ERROR_DISCONNECT_COUNT 5
+
+#define SERIAL_LED_ADDR 0x00
+
+#define ROWS_PER_HAND (MATRIX_ROWS/2)
+
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_enable = true;
+    debug_matrix = true;
+    debug_mouse = true;
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    TX_RX_LED_INIT;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+
+}
+
+uint8_t _matrix_scan(void)
+{
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+#if (DIODE_DIRECTION == COL2ROW)
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+
+#       else
+            read_cols_on_row(matrix+offset, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix+offset, current_col);
+#       endif
+
+    }
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+            debouncing = false;
+        }
+#   endif
+
+    return 1;
+}
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    if (serial_update_buffers()) {
+        return 1;
+    }
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+
+#ifdef BACKLIGHT_ENABLE
+    // Write backlight level for slave to read
+    serial_master_buffer[SERIAL_LED_ADDR] = backlight_config.enable ? backlight_config.level : 0;
+#endif
+    return 0;
+}
+
+
+uint8_t matrix_scan(void)
+{
+    uint8_t ret = _matrix_scan();
+
+    if( serial_transaction() ) {
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+    matrix_scan_quantum();
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+    _matrix_scan();
+
+    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+
+#ifdef BACKLIGHT_ENABLE
+    // Read backlight level sent from master and update level on slave
+    backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif

keyboards/fortitude60/readme.md

@@ -0,0 +1,15 @@
+# Fortitude60
+
+![Fortitude60](https://i.imgur.com/Tbznwgg.jpg)
+
+👊A 60% (12x5) split keyboard with staggerd column layout.👊
+
+Keyboard Maintainer: [Pekaso](https://github.com/Pekaso) [@Pekaso](https://twitter.com/Pekaso)  
+Hardware Supported: Fortitude60 PCB, Beetle 32u4  
+Hardware Availability: [plustk2s.com](http://plustk2s.com)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make fortitude60/rev1:default:avrdude
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/fortitude60/rev1/config.h

@@ -0,0 +1,91 @@
+/*
+Copyright 2017 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include QMK_KEYBOARD_CONFIG_H
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCB10
+#define PRODUCT_ID      0x1156
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Pekaso
+#define PRODUCT         The Fortitude60 Keyboard
+#define DESCRIPTION     Split 60 keyboard.
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D1, D0, D3, B7, B6 }
+#define MATRIX_COL_PINS { F7, F6, F5, B3, B2, B1 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+#ifdef BACKLIGHT_ENABLE
+  #define BACKLIGHT_PIN B5
+  #define BACKLIGHT_LEVELS 9
+//  #define BACKLIGHT_BREATHING
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+/* #define RGB_DI_PIN D3 */
+/* #define RGBLIGHT_TIMER */
+/* #define RGBLED_NUM 16    // Number of LEDs */
+/* #define ws2812_PORTREG  PORTD */
+/* #define ws2812_DDRREG   DDRD */
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif

keyboards/fortitude60/rev1/rev1.c

@@ -0,0 +1,22 @@
+#include "rev1.h"
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+
+    // // green led on
+    // DDRD |= (1<<5);
+    // PORTD &= ~(1<<5);
+
+    // // orange led on
+    // DDRB |= (1<<0);
+    // PORTB &= ~(1<<0);
+
+	matrix_init_user();
+};
+

keyboards/fortitude60/rev1/rev1.h

@@ -0,0 +1,44 @@
+#ifndef REV1_H
+#define REV1_H
+
+#include "fortitude60.h"
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+	#include <avr/io.h>
+	#include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+// Standard Keymap
+// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
+#define LAYOUT( \
+	L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
+	L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \
+	L20, L21, L22, L23, L24, L25,           R20, R21, R22, R23, R24, R25, \
+	L30, L31, L32, L33, L34, L35, LT5, RT5, R30, R31, R32, R33, R34, R35, \
+              LT0, LT1, LT2, LT3, LT4, RT4, RT3, RT2, RT1, RT0                    \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05 }, \
+		{ L10, L11, L12, L13, L14, L15 }, \
+		{ L20, L21, L22, L23, L24, L25 }, \
+		{ L30, L31, L32, L33, L34, L35 }, \
+		{ LT0, LT1, LT2, LT3, LT4, LT5 }, \
+		{ R05, R04, R03, R02, R01, R00 }, \
+		{ R15, R14, R13, R12, R11, R10 }, \
+		{ R25, R24, R23, R22, R21, R20 }, \
+		{ R35, R34, R33, R32, R31, R30 }, \
+		{ RT0, RT1, RT2, RT3, RT4, RT5 } \
+	}
+
+#define LAYOUT_ortho_5x12 LAYOUT
+
+#endif

keyboards/fortitude60/rev1/rules.mk

@@ -0,0 +1 @@
+BACKLIGHT_ENABLE = yes

keyboards/fortitude60/rules.mk

@@ -0,0 +1,72 @@
+SRC += matrix.c \
+       split_util.c \
+       serial.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+USE_SERIAL = yes	# Serial support only on fortitude60
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = yes    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
+
+DEFAULT_FOLDER = fortitude60/rev1

keyboards/fortitude60/serial.c

@@ -0,0 +1,235 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifndef USE_I2C
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input();
+
+#ifndef USE_SERIAL_PD2
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+#else
+  // Enable INT2
+  EIMSK |= _BV(INT2);
+  // Trigger on falling edge of INT2
+  EICRA &= ~(_BV(ISC20) | _BV(ISC21));
+#endif
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+  serial_input();
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+  serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+  serial_output();
+
+  serial_low();
+  serial_delay();
+
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+  uint8_t byte = 0;
+  serial_input();
+  for ( uint8_t i = 0; i < 8; ++i) {
+    byte = (byte << 1) | serial_read_pin();
+    serial_delay();
+    _delay_us(1);
+  }
+
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+  uint8_t b = 8;
+  serial_output();
+  while( b-- ) {
+    if(data & (1 << b)) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    serial_delay();
+  }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  sync_send();
+
+  uint8_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_slave_buffer[i]);
+    sync_send();
+    checksum += serial_slave_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_send();
+
+  // wait for the sync to finish sending
+  serial_delay();
+
+  // read the middle of pulses
+  _delay_us(SERIAL_DELAY/2);
+
+  uint8_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_master_buffer[i] = serial_read_byte();
+    sync_send();
+    checksum_computed += serial_master_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_send();
+
+  serial_input(); // end transaction
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(1);
+
+  // wait for the slaves response
+  serial_input();
+  serial_high();
+  _delay_us(SERIAL_DELAY);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    sei();
+    return 1;
+  }
+
+  // if the slave is present syncronize with it
+  sync_recv();
+
+  uint8_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_slave_buffer[i] = serial_read_byte();
+    sync_recv();
+    checksum_computed += serial_slave_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_recv();
+
+  if (checksum_computed != checksum_received) {
+    sei();
+    return 2;
+  }
+
+  uint8_t checksum = 0;
+  // send data to the slave
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_master_buffer[i]);
+    sync_recv();
+    checksum += serial_master_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_recv();
+
+  // always, release the line when not in use
+  serial_output();
+  serial_high();
+
+  sei();
+  return 0;
+}
+
+#endif

keyboards/fortitude60/serial.h

@@ -0,0 +1,32 @@
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include <stdbool.h>
+
+/* TODO:  some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+
+#ifndef USE_SERIAL_PD2
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+#else
+#define SERIAL_PIN_MASK _BV(PD2)
+#define SERIAL_PIN_INTERRUPT INT2_vect
+#endif
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif

keyboards/fortitude60/split_util.c

@@ -0,0 +1,85 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+#include "timer.h"
+
+#include "serial.h"
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+  #ifdef EE_HANDS
+    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #else
+    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+      isLeftHand = !has_usb();
+    #else
+      isLeftHand = has_usb();
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+#ifdef USE_I2C
+    i2c_master_init();
+#ifdef SSD1306OLED
+    matrix_master_OLED_init ();
+#endif
+#else
+    serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+  timer_init();
+#ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+    serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+  /* return (UDADDR & _BV(ADDEN)); */
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (isLeftHand) {
+   /* if (has_usb()) { */
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+void keyboard_slave_loop(void) {
+   matrix_init();
+
+   while (1) {
+      matrix_slave_scan();
+   }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+
+    if (!isLeftHand) {
+    /* if (!has_usb()) { */
+        keyboard_slave_loop();
+    }
+}

keyboards/fortitude60/split_util.h

@@ -0,0 +1,18 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+#include "eeconfig.h"
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+void matrix_master_OLED_init (void);
+
+#endif

keyboards/gherkin/keymaps/bbaserdem/README.md

@@ -0,0 +1,11 @@
+# Gherkin Layout
+This is my gherkin layout.
+It is used as a game pad, and key layout is inspired by spare keys I had lying around.
+The firmware is very simple, and only includes one layer keymap, and RGB effects.
+
+# Flashing
+The following command should be used from the main qmk directory.
+```
+make gherkin:bbaserdem
+sudo avrdude -p atmgea34u4 -P `ls /dev/ttyACM*` -c avr109 -U flash:.build/gherkin_bbaserdem.hex
+```

keyboards/gherkin/keymaps/bbaserdem/config.h

@@ -0,0 +1,13 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+#define RGB_DI_PIN F6
+#define RGBLED_NUM 10
+#define RGBLIGHT_ANIMATIONS
+#ifdef BACKLIGHT_LEVELS
+#undef BACKLIGHT_LEVELS
+#endif
+#define BACKLIGHT_LEVELS 3
+
+#endif

keyboards/gherkin/keymaps/bbaserdem/keymap.c

@@ -0,0 +1,36 @@
+// This is a game-pad gherkin layout with RGB and LED lights
+
+#include "gherkin.h"
+
+backlight_config_t backlight_config;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Game pad
+ * ,-----------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  | Ctl | Alt |  ~  |
+ * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
+ * | Tab |  Q  |  W  |  E  |  R  |  T  | |^| |  ;  |  '  |  /  |
+ * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----|
+ * | Shf |  A  |  S  |  D  |  F  | <-- | |v| | --> |  ,  |  .  |
+ * `-----------------------------------------------------------'
+ */
+    KEYMAP(
+        KC_ESCAPE, KC_1, KC_2, KC_3, KC_4, KC_5,    KC_6,    KC_LCTRL, KC_LALT,  KC_GRAVE,
+        KC_TAB,    KC_Q, KC_W, KC_E, KC_R, KC_T,    KC_UP,   KC_SCLN,  KC_QUOTE, KC_SLASH,
+        KC_LSHIFT, KC_A, KC_S, KC_D, KC_F, KC_LEFT, KC_DOWN, KC_RIGHT, KC_COMMA, KC_DOT
+    )
+};
+
+void matrix_init_user(void) {
+    // Set LED's to max
+    _delay_us(300);
+    backlight_config.level = 2;
+    backlight_config.enable = 1;
+    eeconfig_update_backlight(backlight_config.raw);
+    backlight_set(backlight_config.level);
+    // Set RGB to rainbow mood light
+    rgblight_enable();
+    rgblight_mode(1);
+    rgblight_sethsv(120,255,255);
+    rgblight_mode(6);
+}

keyboards/gherkin/keymaps/bbaserdem/rules.mk

@@ -0,0 +1,14 @@
+ifndef QUANTUM_DIR
+  include ../../../../Makefile
+endif
+
+STENO_ENABLE = no      # Additional protocols for Stenography(+1700), requires VIRTSER
+MOUSEKEY_ENABLE = no   # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no   # Audio control and System control(+450)
+CONSOLE_ENABLE = no    # Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes      # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+AUDIO_ENABLE = no 	   # Enable audio output from keyboard
+RGBLIGHT_ENABLE = yes  # Enable RBG light strips
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality

keyboards/handwired/not_so_minidox/config.h

@@ -0,0 +1,84 @@
+/*
+Copyright 2012 Jun Wako <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    mtdjr
+#define PRODUCT         Not So MiniDox
+#define DESCRIPTION     A larger version of the MiniDox
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, D4 }
+
+#define USE_SERIAL
+
+//#define EE_HANDS
+
+#define MASTER_LEFT
+//#define MASTER_RIGHT
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+
+
+#endif

keyboards/handwired/not_so_minidox/i2c.c

@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif

keyboards/handwired/not_so_minidox/i2c.h

@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif

keyboards/handwired/not_so_minidox/keymaps/default/keymap.c

@@ -0,0 +1,121 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+#define KC_LOWR LOWER
+#define KC_RASE RAISE
+#define KC_RST  RESET
+#define KC_CAD  LCTL(LALT(KC_DEL))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+// ,-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------.
+    KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,             KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_BSPC,
+// |-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------|
+    KC_LCTL,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,             KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,
+// |-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------|
+    KC_LSFT,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,             KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_ENT,
+// '-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------'
+                              KC_LGUI,KC_LOWR, KC_SPC,       KC_SPC,KC_RASE,KC_RALT
+                          // `-------+-------+-------`     `-------+-------+-------`
+   ),
+
+  [_LOWER] = LAYOUT(
+// ,-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------.
+     KC_ESC,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,             KC_6,   KC_7,   KC_8,   KC_9,   KC_0, KC_DEL,
+// |-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------|
+    _______,_______,_______,_______,_______,_______,          _______,_______,_______,KC_LCBR,KC_RCBR,KC_BSLS,
+// |-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------|
+    _______,_______,_______,_______,_______,_______,          _______,_______,_______,_______,_______,_______,
+// '-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------'
+                              _______,_______,_______,      _______,_______,_______
+                          // `-------+-------+-------`     `-------+-------+-------`
+  ),
+
+  [_RAISE] = LAYOUT(
+ // ,-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------.
+      KC_GRV,KC_EXLM,  KC_AT,KC_HASH, KC_DLR,KC_PERC,          KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN, KC_DEL,
+ // |-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,KC_MINS, KC_EQL,          _______,  KC_UP,_______,KC_LBRC,KC_RBRC,KC_PIPE,
+ // |-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------|
+     _______,_______,_______,_______,_______,_______,          KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,
+ // '-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------'
+                               _______,_______,_______,      _______,_______,_______
+                           // `-------+-------+-------`     `-------+-------+-------`
+   ),
+  [_ADJUST] = LAYOUT(
+// ,-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------.
+    _______,_______,_______,_______, KC_RST,_______,          _______,_______,_______,_______,_______, KC_CAD,
+// |-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------|
+    _______,_______,_______,_______,_______,_______,          _______,_______,_______,_______,_______,_______,
+// |-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------|
+    _______,_______,_______,_______,_______,_______,          _______,_______,_______,_______,_______,_______,
+// '-------+-------+-------+-------+-------+-------.         ,-------+-------+-------+-------+-------+-------'
+                              _______,_______,_______,      _______,_______,_______
+                          // `-------+-------+-------`     `-------+-------+-------`
+  )
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_ADJUST);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/handwired/not_so_minidox/keymaps/mtdjr/config.h

@@ -0,0 +1,11 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include QMK_KEYBOARD_CONFIG_H
+
+#define SOLENOID_ENABLE
+#define SOLENOID_PIN F6
+#undef  SOLENOID_ACTIVE
+#define SOLENOID_ACTIVE true
+
+#endif

keyboards/handwired/not_so_minidox/keymaps/mtdjr/keymap.c

@@ -0,0 +1,56 @@
+#include QMK_KEYBOARD_H
+#include "mtdjr.h"
+
+extern keymap_config_t keymap_config;
+
+#define KC_LOCK TD(TD_ALTLOCK)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT_kc(
+  // ,----+-----+-----+-----+-----+-----,         ,----+-----+-----+-----+-----+-----,
+       TAB,    Q,    W,    E,    R,    T,             Y,    U,    I,    O,    P, BSPC,
+  // |----+-----+-----+-----+-----+-----|         |----+-----+-----+-----+-----+-----|
+      LCTL,    A,    S,    D,    F,    G,             H,    J,    K,    L, SCLN, QUOT,
+  // |----+-----+-----+-----+-----+-----|         |----+-----+-----+-----+-----+-----|
+      LSFT,    Z,    X,    C,    V,    B,             N,    M, COMM,  DOT, SLSH,  ENT,
+  // |----+-----+-----+-----+-----+-----|-,     ,-|----+-----+-----+-----+-----+-----|
+                          LGUI, LOWR,  SPC,       SPC, RASE, LOCK
+  //                     `----+-----+-----`     `----+-----+-----`
+   ),
+
+  [_LOWER] = LAYOUT_kc(
+  // ,----+-----+-----+-----+-----+-----,         ,----+-----+-----+-----+-----+-----,
+       ESC,    1,    2,    3,    4,    5,             6,    7,    8,    9,    0,  DEL,
+  // |----+-----+-----+-----+-----+-----|         |----+-----+-----+-----+-----+-----|
+          ,     ,     ,     ,     ,     ,              ,     ,     , LCBR, RCBR, BSLS,
+  // |----+-----+-----+-----+-----+-----|         |----+-----+-----+-----+-----+-----|
+          ,     ,     , XCPY, XINS,     ,              ,     ,     ,     ,     ,     ,
+  // |----+-----+-----+-----+-----+-----|-,     ,-|----+-----+-----+-----+-----+-----|
+                              ,     ,     ,          ,     ,
+  //                     `----+-----+-----`     `----+-----+-----`
+  ),
+
+  [_RAISE] = LAYOUT_kc(
+  // ,----+-----+-----+-----+-----+-----,         ,----+-----+-----+-----+-----+-----,
+       GRV, EXLM,   AT, HASH,  DLR, PERC,          CIRC, AMPR, ASTR, LPRN, RPRN,  DEL,
+  // |----+-----+-----+-----+-----+-----|         |----+-----+-----+-----+-----+-----|
+          ,     ,     ,     , MINS,  EQL,              ,     ,   UP, LBRC, RBRC, PIPE,
+  // |----+-----+-----+-----+-----+-----|         |----+-----+-----+-----+-----+-----|
+          ,     ,     ,     ,     ,     ,              , LEFT, DOWN, RGHT,     ,     ,
+  // |----+-----+-----+-----+-----+-----|-,     ,-|----+-----+-----+-----+-----+-----|
+                              ,     ,     ,          ,     ,
+  //                     `----+-----+-----`     `----+-----+-----`
+   ),
+  [_ADJUST] = LAYOUT_kc(
+  // ,----+-----+-----+-----+-----+-----,         ,----+-----+-----+-----+-----+-----,
+      STOG, xxxx, xxxx, xxxx,  RST, xxxx,          ROOT, PPLY, PSEF, xxxx, xxxx,  CAD,
+  // |----+-----+-----+-----+-----+-----|         |----+-----+-----+-----+-----+-----|
+      SDM,   SDP, SBOF, SBON, xxxx, xxxx,          xxxx, xxxx, xxxx, xxxx, xxxx, xxxx,
+  // |----+-----+-----+-----+-----+-----|         |----+-----+-----+-----+-----+-----|
+      xxxx, xxxx, xxxx, xxxx, xxxx, xxxx,          xxxx, xxxx, xxxx, xxxx, xxxx, xxxx,
+  // |----+-----+-----+-----+-----+-----|-,     ,-|----+-----+-----+-----+-----+-----|
+                          xxxx,     , xxxx,      xxxx,     , xxxx
+  //                     `----+-----+-----`     `----+-----+-----`
+  )
+};

keyboards/handwired/not_so_minidox/keymaps/mtdjr/rules.mk

@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes

keyboards/handwired/not_so_minidox/matrix.c

@@ -0,0 +1,307 @@
+/*
+Copyright 2012 Jun Wako <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else // USE_SERIAL
+#  include "serial.h"
+#endif
+
+#ifndef DEBOUNCE
+#  define DEBOUNCE	5
+#endif
+
+#define ERROR_DISCONNECT_COUNT 5
+
+static uint8_t debouncing = DEBOUNCE;
+static const int ROWS_PER_HAND = MATRIX_ROWS/2;
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static matrix_row_t read_cols(void);
+static void init_cols(void);
+static void unselect_rows(void);
+static void select_row(uint8_t row);
+
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    debug_enable = true;
+    debug_matrix = true;
+    debug_mouse = true;
+    // initialize row and col
+    unselect_rows();
+    init_cols();
+
+    TX_RX_LED_INIT;
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+}
+
+uint8_t _matrix_scan(void)
+{
+    // Right hand is stored after the left in the matirx so, we need to offset it
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+
+    for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+        select_row(i);
+        _delay_us(30);  // without this wait read unstable value.
+        matrix_row_t cols = read_cols();
+        if (matrix_debouncing[i+offset] != cols) {
+            matrix_debouncing[i+offset] = cols;
+            debouncing = DEBOUNCE;
+        }
+        unselect_rows();
+    }
+
+    if (debouncing) {
+        if (--debouncing) {
+            _delay_ms(1);
+        } else {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+        }
+    }
+
+    return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) goto i2c_error;
+
+    // start of matrix stored at 0x00
+    err = i2c_master_write(0x00);
+    if (err) goto i2c_error;
+
+    // Start read
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+    if (err) goto i2c_error;
+
+    if (!err) {
+        int i;
+        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+        }
+        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+        i2c_master_stop();
+    } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+        i2c_reset_state();
+        return err;
+    }
+
+    return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    if (serial_update_buffers()) {
+        return 1;
+    }
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+    return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+    int ret = _matrix_scan();
+
+
+
+#ifdef USE_I2C
+    if( i2c_transaction() ) {
+#else // USE_SERIAL
+    if( serial_transaction() ) {
+#endif
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+    matrix_scan_quantum();
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+    _matrix_scan();
+
+    int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2);
+
+#ifdef USE_I2C
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        /* i2c_slave_buffer[i] = matrix[offset+i]; */
+        i2c_slave_buffer[i] = matrix[offset+i];
+    }
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+static void  init_cols(void)
+{
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        _SFR_IO8((col_pins[x] >> 4) + 1) &=  ~_BV(col_pins[x] & 0xF);
+        _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
+    }
+}
+
+static matrix_row_t read_cols(void)
+{
+    matrix_row_t result = 0;
+    for(int x = 0; x < MATRIX_COLS; x++) {
+        result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
+    }
+    return result;
+}
+
+static void unselect_rows(void)
+{
+    for(int x = 0; x < ROWS_PER_HAND; x++) {
+        _SFR_IO8((row_pins[x] >> 4) + 1) &=  ~_BV(row_pins[x] & 0xF);
+        _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
+    }
+}
+
+static void select_row(uint8_t row)
+{
+    _SFR_IO8((row_pins[row] >> 4) + 1) |=  _BV(row_pins[row] & 0xF);
+    _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
+}

keyboards/handwired/not_so_minidox/not_so_minidox.c

@@ -0,0 +1 @@
+#include "not_so_minidox.h"

keyboards/handwired/not_so_minidox/not_so_minidox.h

@@ -0,0 +1,42 @@
+#ifndef NOSOTMINIDOX_H
+#define NOSOTMINIDOX_H
+
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	L00, L01, L02, L03, L04, L05,           R05, R04, R03, R02, R01, R00, \
+	L10, L11, L12, L13, L14, L15,           R15, R14, R13, R12, R11, R10, \
+	L20, L21, L22, L23, L24, L25,           R25, R24, R23, R22, R21, R20, \
+											LT1, LT2, LT3, RT3, RT2, RT1 \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05 }, \
+		{ L10, L11, L12, L13, L14, L15 }, \
+		{ L20, L21, L22, L23, L24, L25 }, \
+		{ KC_NO, KC_NO, KC_NO, LT1, LT2, LT3 }, \
+		{ R00, R01, R02, R03, R04, R05 }, \
+		{ R10, R11, R12, R13, R14, R15 }, \
+		{ R20, R21, R22, R23, R24, R25 }, \
+		{ KC_NO, KC_NO, KC_NO, RT1, RT2, RT3 }, \
+	}
+
+// Used to create a keymap using only KC_ prefixed keys
+#define LAYOUT_kc( \
+	L00, L01, L02, L03, L04, L05,           R05, R04, R03, R02, R01, R00, \
+	L10, L11, L12, L13, L14, L15,           R15, R14, R13, R12, R11, R10, \
+	L20, L21, L22, L23, L24, L25,           R25, R24, R23, R22, R21, R20, \
+											LT1, LT2, LT3, RT3, RT2, RT1 \
+	) \
+	{ \
+		{ KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05 }, \
+		{ KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15 }, \
+		{ KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25 }, \
+		{ KC_NO, KC_NO, KC_NO, KC_##LT1, KC_##LT2, KC_##LT3 }, \
+		{ KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05 }, \
+		{ KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15 }, \
+		{ KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25 }, \
+		{ KC_NO, KC_NO, KC_NO, KC_##RT1, KC_##RT2, KC_##RT3 }, \
+	}
+
+#endif

keyboards/handwired/not_so_minidox/readme.md

@@ -0,0 +1,71 @@
+not_so_minidox
+=====
+
+![not_so_minidox]()
+
+A slightly larger version of the MiniDox
+
+Keyboard Maintainer: mtdjr
+Hardware Supported: None yet/ProMicro
+
+Make example for this keyboard (after setting up your build environment):
+
+    make not_so_minidox/rev1:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+Flashing
+-------
+Note: Most of this is copied from the Let's Split readme, because it is awesome
+
+From the root directory run `make PROJECT:KEYMAP:avrdude` for automatic serial port resolution and flashing.
+Example: `make not_so_minidox/rev1:default:avrdude`
+
+Choosing which board to plug the USB cable into (choosing Master)
+--------
+Because the two boards are identical, the firmware has logic to differentiate the left and right board.
+
+It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable.
+
+The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side.
+
+The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
+
+### Setting the left hand as master
+If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
+
+### Setting the right hand as master
+If you always plug the usb cable into the right board, add an extra flag to your `config.h`
+```
+ #define MASTER_RIGHT
+```
+
+### Setting EE_hands to use either hands as master
+If you define `EE_HANDS` in your `config.h`, you will need to set the
+EEPROM for the left and right halves.
+
+The EEPROM is used to store whether the
+half is left handed or right handed. This makes it so that the same firmware
+file will run on both hands instead of having to flash left and right handed
+versions of the firmware to each half. To flash the EEPROM file for the left
+half run:
+```
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
+// or the equivalent in dfu-programmer
+
+```
+and similarly for right half
+```
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
+// or the equivalent in dfu-programmer
+```
+
+NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
+
+After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
+
+Note that you need to program both halves, but you have the option of using
+different keymaps for each half. You could program the left half with a QWERTY
+layout and the right half with a Colemak layout using bootmagic's default layout option.
+Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
+right half is connected.

keyboards/handwired/not_so_minidox/rules.mk

@@ -0,0 +1,71 @@
+SRC += matrix.c \
+	   i2c.c \
+	   split_util.c \
+	   serial.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= no       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+NKRO_ENABLE ?= no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality
+MIDI_ENABLE ?= no            # MIDI controls
+AUDIO_ENABLE ?= no           # Audio output on port C6
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE ?= no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+USE_I2C ?= no
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes

keyboards/handwired/not_so_minidox/serial.c

@@ -0,0 +1,228 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifndef USE_I2C
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input();
+
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+  serial_input();
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+  serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+  serial_output();
+
+  serial_low();
+  serial_delay();
+
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+  uint8_t byte = 0;
+  serial_input();
+  for ( uint8_t i = 0; i < 8; ++i) {
+    byte = (byte << 1) | serial_read_pin();
+    serial_delay();
+    _delay_us(1);
+  }
+
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+  uint8_t b = 8;
+  serial_output();
+  while( b-- ) {
+    if(data & (1 << b)) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    serial_delay();
+  }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  sync_send();
+
+  uint8_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_slave_buffer[i]);
+    sync_send();
+    checksum += serial_slave_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_send();
+
+  // wait for the sync to finish sending
+  serial_delay();
+
+  // read the middle of pulses
+  _delay_us(SERIAL_DELAY/2);
+
+  uint8_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_master_buffer[i] = serial_read_byte();
+    sync_send();
+    checksum_computed += serial_master_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_send();
+
+  serial_input(); // end transaction
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(1);
+
+  // wait for the slaves response
+  serial_input();
+  serial_high();
+  _delay_us(SERIAL_DELAY);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    sei();
+    return 1;
+  }
+
+  // if the slave is present syncronize with it
+  sync_recv();
+
+  uint8_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_slave_buffer[i] = serial_read_byte();
+    sync_recv();
+    checksum_computed += serial_slave_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_recv();
+
+  if (checksum_computed != checksum_received) {
+    sei();
+    return 1;
+  }
+
+  uint8_t checksum = 0;
+  // send data to the slave
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_master_buffer[i]);
+    sync_recv();
+    checksum += serial_master_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_recv();
+
+  // always, release the line when not in use
+  serial_output();
+  serial_high();
+
+  sei();
+  return 0;
+}
+
+#endif

keyboards/handwired/not_so_minidox/serial.h

@@ -0,0 +1,26 @@
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include <stdbool.h>
+
+/* TODO:  some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif

keyboards/handwired/not_so_minidox/split_util.c

@@ -0,0 +1,84 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else
+#  include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+static void setup_handedness(void) {
+  #ifdef EE_HANDS
+    isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #else
+    // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+    #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+      isLeftHand = !has_usb();
+    #else
+      isLeftHand = has_usb();
+    #endif
+  #endif
+}
+
+static void keyboard_master_setup(void) {
+#ifdef USE_I2C
+    i2c_master_init();
+#ifdef SSD1306OLED
+    matrix_master_OLED_init ();
+#endif
+#else
+    serial_master_init();
+#endif
+}
+
+static void keyboard_slave_setup(void) {
+#ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+    serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+   USBCON |= (1 << OTGPADE); //enables VBUS pad
+   _delay_us(5);
+   return (USBSTA & (1<<VBUS));  //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+   setup_handedness();
+
+   if (has_usb()) {
+      keyboard_master_setup();
+   } else {
+      keyboard_slave_setup();
+   }
+   sei();
+}
+
+void keyboard_slave_loop(void) {
+   matrix_init();
+
+   while (1) {
+      matrix_slave_scan();
+   }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+    split_keyboard_setup();
+
+    if (!has_usb()) {
+        keyboard_slave_loop();
+    }
+}

keyboards/handwired/not_so_minidox/split_util.h

@@ -0,0 +1,20 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+#include "eeconfig.h"
+
+#define SLAVE_I2C_ADDRESS           0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+void matrix_master_OLED_init (void);
+
+#endif

keyboards/helix/rev2/keymaps/led_test/keymap.c

@@ -32,7 +32,7 @@ extern uint8_t is_master;
 #define _DVORAK 2
 #define _LOWER 3
 #define _RAISE 4
-#define _ADJUST 16
+#define _ADJUST 6
 
 enum custom_keycodes {
   QWERTY = SAFE_RANGE,
@@ -513,6 +513,12 @@ void music_scale_user(void)
 #ifdef SSD1306OLED
 
 void matrix_scan_user(void) {
+    static int scan_count = 0;
+    if( scan_count == 2 ) {
+      rgblight_enable();
+      rgblight_mode(35);
+    }
+    if( scan_count < 3 ) scan_count ++;
      iota_gfx_task();  // this is what updates the display continuously
 }
 

keyboards/helix/rev2/keymaps/led_test/rgblight.c

@@ -23,8 +23,15 @@
 #include "debug.h"
 #include "led_tables.h"
 
+#ifndef RGBLIGHT_LIMIT_VAL
+#define RGBLIGHT_LIMIT_VAL 255
+#endif
+
+#define MIN(a,b) (((a)<(b))?(a):(b))
+#define MAX(a,b) (((a)>(b))?(a):(b))
+
 __attribute__ ((weak))
-const uint16_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {1024, 20, 10, 5}; //modify for led_test
+const uint8_t RGBLED_BREATHING_INTERVALS[] PROGMEM = {30, 20, 10, 5};
 __attribute__ ((weak))
 const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {120, 60, 30};
 __attribute__ ((weak))
@@ -35,9 +42,10 @@ __attribute__ ((weak))
 const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31};
 __attribute__ ((weak))
 const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
+__attribute__ ((weak))
+const uint16_t RGBLED_RGBCYCLIC_INTERVALS[] PROGMEM = {1024};
 
 rgblight_config_t rgblight_config;
-rgblight_config_t inmem_config;
 
 LED_TYPE led[RGBLED_NUM];
 uint8_t rgblight_inited = 0;
@@ -46,11 +54,9 @@ bool rgblight_timer_enabled = false;
 void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) {
   uint8_t r = 0, g = 0, b = 0, base, color;
 
-  #ifdef RGBLIGHT_LIMIT_VAL
+  if (val > RGBLIGHT_LIMIT_VAL) {
-    if (val > RGBLIGHT_LIMIT_VAL) {
       val=RGBLIGHT_LIMIT_VAL; // limit the val
-    }
+  }
-  #endif
 
   if (sat == 0) { // Acromatic color (gray). Hue doesn't mind.
     r = val;
@@ -119,7 +125,8 @@ void eeconfig_update_rgblight_default(void) {
   rgblight_config.mode = 1;
   rgblight_config.hue = 0;
   rgblight_config.sat = 255;
-  rgblight_config.val = 255;
+  rgblight_config.val = RGBLIGHT_LIMIT_VAL;
+  rgblight_config.speed = 0;
   eeconfig_update_rgblight(rgblight_config.raw);
 }
 void eeconfig_debug_rgblight(void) {
@@ -129,6 +136,7 @@ void eeconfig_debug_rgblight(void) {
   dprintf("rgblight_config.hue = %d\n", rgblight_config.hue);
   dprintf("rgblight_config.sat = %d\n", rgblight_config.sat);
   dprintf("rgblight_config.val = %d\n", rgblight_config.val);
+  dprintf("rgblight_config.speed = %d\n", rgblight_config.speed);
 }
 
 void rgblight_init(void) {
@@ -154,7 +162,7 @@ void rgblight_init(void) {
   #endif
 
   if (rgblight_config.enable) {
-    rgblight_mode(rgblight_config.mode);
+    rgblight_mode_noeeprom(rgblight_config.mode);
   }
 }
 
@@ -211,7 +219,7 @@ uint32_t rgblight_get_mode(void) {
   return rgblight_config.mode;
 }
 
-void rgblight_mode(uint8_t mode) {
+void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) {
   if (!rgblight_config.enable) {
     return;
   }
@@ -222,13 +230,18 @@ void rgblight_mode(uint8_t mode) {
   } else {
     rgblight_config.mode = mode;
   }
-  eeconfig_update_rgblight(rgblight_config.raw);
+  if (write_to_eeprom) {
-  xprintf("rgblight mode: %u\n", rgblight_config.mode);
+    eeconfig_update_rgblight(rgblight_config.raw);
+    xprintf("rgblight mode [EEPROM]: %u\n", rgblight_config.mode);
+  } else {
+    xprintf("rgblight mode [NOEEPROM]: %u\n", rgblight_config.mode);
+  }
   if (rgblight_config.mode == 1) {
     #ifdef RGBLIGHT_ANIMATIONS
       rgblight_timer_disable();
     #endif
-  } else if (rgblight_config.mode >= 2 && rgblight_config.mode <= 24) {
+  } else if ((rgblight_config.mode >= 2 && rgblight_config.mode <= 24) ||
+	     rgblight_config.mode == 35 ) {
     // MODE 2-5, breathing
     // MODE 6-8, rainbow mood
     // MODE 9-14, rainbow swirl
@@ -236,6 +249,7 @@ void rgblight_mode(uint8_t mode) {
     // MODE 21-23, knight
     // MODE 24, xmas
     // MODE 25-34, static rainbow
+    // MODE 35  RGB cyclic
 
     #ifdef RGBLIGHT_ANIMATIONS
       rgblight_timer_enable();
@@ -247,11 +261,20 @@ void rgblight_mode(uint8_t mode) {
       rgblight_timer_disable();
     #endif
   }
-  rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
+  rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
 }
 
+void rgblight_mode(uint8_t mode) {
+  rgblight_mode_eeprom_helper(mode, true);
+}
+
+void rgblight_mode_noeeprom(uint8_t mode) {
+  rgblight_mode_eeprom_helper(mode, false);
+}
+
+
 void rgblight_toggle(void) {
-  xprintf("rgblight toggle: rgblight_config.enable = %u\n", !rgblight_config.enable);
+  xprintf("rgblight toggle [EEPROM]: rgblight_config.enable = %u\n", !rgblight_config.enable);
   if (rgblight_config.enable) {
     rgblight_disable();
   }
@@ -260,17 +283,34 @@ void rgblight_toggle(void) {
   }
 }
 
+void rgblight_toggle_noeeprom(void) {
+  xprintf("rgblight toggle [NOEEPROM]: rgblight_config.enable = %u\n", !rgblight_config.enable);
+  if (rgblight_config.enable) {
+    rgblight_disable_noeeprom();
+  }
+  else {
+    rgblight_enable_noeeprom();
+  }
+}
+
 void rgblight_enable(void) {
   rgblight_config.enable = 1;
-  eeconfig_update_rgblight(rgblight_config.raw);
+  // No need to update EEPROM here. rgblight_mode() will do that, actually
-  xprintf("rgblight enable: rgblight_config.enable = %u\n", rgblight_config.enable);
+  //eeconfig_update_rgblight(rgblight_config.raw);
+  xprintf("rgblight enable [EEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable);
   rgblight_mode(rgblight_config.mode);
 }
 
+void rgblight_enable_noeeprom(void) {
+  rgblight_config.enable = 1;
+  xprintf("rgblight enable [NOEEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable);
+  rgblight_mode_noeeprom(rgblight_config.mode);
+}
+
 void rgblight_disable(void) {
   rgblight_config.enable = 0;
   eeconfig_update_rgblight(rgblight_config.raw);
-  xprintf("rgblight disable: rgblight_config.enable = %u\n", rgblight_config.enable);
+  xprintf("rgblight disable [EEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable);
   #ifdef RGBLIGHT_ANIMATIONS
     rgblight_timer_disable();
   #endif
@@ -278,6 +318,29 @@ void rgblight_disable(void) {
   rgblight_set();
 }
 
+void rgblight_disable_noeeprom(void) {
+  rgblight_config.enable = 0;
+  xprintf("rgblight disable [noEEPROM]: rgblight_config.enable = %u\n", rgblight_config.enable);
+  #ifdef RGBLIGHT_ANIMATIONS
+    rgblight_timer_disable();
+  #endif
+  _delay_ms(50);
+  rgblight_set();
+}
+
+
+// Deals with the messy details of incrementing an integer
+uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) {
+    int16_t new_value = value;
+    new_value += step;
+    return MIN( MAX( new_value, min ), max );
+}
+
+uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max ) {
+    int16_t new_value = value;
+    new_value -= step;
+    return MIN( MAX( new_value, min ), max );
+}
 
 void rgblight_increase_hue(void) {
   uint16_t hue;
@@ -313,8 +376,8 @@ void rgblight_decrease_sat(void) {
 }
 void rgblight_increase_val(void) {
   uint8_t val;
-  if (rgblight_config.val + RGBLIGHT_VAL_STEP > 255) {
+  if (rgblight_config.val + RGBLIGHT_VAL_STEP > RGBLIGHT_LIMIT_VAL) {
-    val = 255;
+    val = RGBLIGHT_LIMIT_VAL;
   } else {
     val = rgblight_config.val + RGBLIGHT_VAL_STEP;
   }
@@ -329,24 +392,32 @@ void rgblight_decrease_val(void) {
   }
   rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, val);
 }
+void rgblight_increase_speed(void) {
+    rgblight_config.speed = increment( rgblight_config.speed, 1, 0, 3 );
+    eeconfig_update_rgblight(rgblight_config.raw);//EECONFIG needs to be increased to support this
+}
 
-void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) {
+void rgblight_decrease_speed(void) {
-  inmem_config.raw = rgblight_config.raw;
+    rgblight_config.speed = decrement( rgblight_config.speed, 1, 0, 3 );
+    eeconfig_update_rgblight(rgblight_config.raw);//EECONFIG needs to be increased to support this
+}
+
+void rgblight_sethsv_noeeprom_old(uint16_t hue, uint8_t sat, uint8_t val) {
   if (rgblight_config.enable) {
     LED_TYPE tmp_led;
     sethsv(hue, sat, val, &tmp_led);
-    inmem_config.hue = hue;
-    inmem_config.sat = sat;
-    inmem_config.val = val;
     // dprintf("rgblight set hue [MEMORY]: %u,%u,%u\n", inmem_config.hue, inmem_config.sat, inmem_config.val);
     rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b);
   }
 }
-void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val) {
+
+void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom) {
   if (rgblight_config.enable) {
     if (rgblight_config.mode == 1) {
       // same static color
-      rgblight_sethsv_noeeprom(hue, sat, val);
+      LED_TYPE tmp_led;
+      sethsv(hue, sat, val, &tmp_led);
+      rgblight_setrgb(tmp_led.r, tmp_led.g, tmp_led.b);
     } else {
       // all LEDs in same color
       if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) {
@@ -371,11 +442,23 @@ void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val) {
     rgblight_config.hue = hue;
     rgblight_config.sat = sat;
     rgblight_config.val = val;
-    eeconfig_update_rgblight(rgblight_config.raw);
+    if (write_to_eeprom) {
-    xprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
+      eeconfig_update_rgblight(rgblight_config.raw);
+      xprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
+    } else {
+      xprintf("rgblight set hsv [NOEEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
+    }
   }
 }
 
+void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val) {
+  rgblight_sethsv_eeprom_helper(hue, sat, val, true);
+}
+
+void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) {
+  rgblight_sethsv_eeprom_helper(hue, sat, val, false);
+}
+
 uint16_t rgblight_get_hue(void) {
   return rgblight_config.hue;
 }
@@ -480,18 +563,11 @@ void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b) {
 }
 
 void rgblight_task(void) {
-  if (rgblight_inited == 1) { //modify for led_test
-      /* first call */
-      rgblight_inited = 2;
-      rgblight_enable();
-      rgblight_mode(2);
-  }
   if (rgblight_timer_enabled) {
     // mode = 1, static light, do nothing here
     if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) {
       // mode = 2 to 5, breathing mode
       rgblight_effect_breathing(rgblight_config.mode - 2);
-#if 0
     } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 8) {
       // mode = 6 to 8, rainbow mood mod
       rgblight_effect_rainbow_mood(rgblight_config.mode - 6);
@@ -507,7 +583,9 @@ void rgblight_task(void) {
     } else if (rgblight_config.mode == 24) {
       // mode = 24, christmas mode
       rgblight_effect_christmas();
-#endif
+    } else if (rgblight_config.mode == 35) {
+      // mode = 35, RGB cyclic
+      rgblight_effect_rgbcyclic();
     }
   }
 }
@@ -516,19 +594,19 @@ void rgblight_task(void) {
 void rgblight_effect_breathing(uint8_t interval) {
   static uint8_t pos = 0;
   static uint16_t last_timer = 0;
+  float val;
 
-  if (timer_elapsed(last_timer) < pgm_read_word(&RGBLED_BREATHING_INTERVALS[interval])) {//modify for led_test
+  if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_BREATHING_INTERVALS[interval])) {
     return;
   }
   last_timer = timer_read();
 
 
-  //modify for led_test
+  // http://sean.voisen.org/blog/2011/10/breathing-led-with-arduino/
-  rgblight_config.hue = (pos*120)%360;
+  val = (exp(sin((pos/255.0)*M_PI)) - RGBLIGHT_EFFECT_BREATHE_CENTER/M_E)*(RGBLIGHT_EFFECT_BREATHE_MAX/(M_E-1/M_E));
-  rgblight_sethsv_noeeprom(rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
+  rgblight_sethsv_noeeprom_old(rgblight_config.hue, rgblight_config.sat, val);
-  pos = (pos + 1) % 3;
+  pos = (pos + 1) % 256;
 }
-#if 0
 void rgblight_effect_rainbow_mood(uint8_t interval) {
   static uint16_t current_hue = 0;
   static uint16_t last_timer = 0;
@@ -537,7 +615,7 @@ void rgblight_effect_rainbow_mood(uint8_t interval) {
     return;
   }
   last_timer = timer_read();
-  rgblight_sethsv_noeeprom(current_hue, rgblight_config.sat, rgblight_config.val);
+  rgblight_sethsv_noeeprom_old(current_hue, rgblight_config.sat, rgblight_config.val);
   current_hue = (current_hue + 1) % 360;
 }
 void rgblight_effect_rainbow_swirl(uint8_t interval) {
@@ -662,5 +740,24 @@ void rgblight_effect_christmas(void) {
   }
   rgblight_set();
 }
-#endif /* 0 */
+
+void rgblight_effect_rgbcyclic(void) {
+  static uint8_t pos = 0;
+  static uint16_t last_timer = 0;
+  uint8_t g; uint8_t r; uint8_t b;
+
+  if (timer_elapsed(last_timer) < pgm_read_word(&RGBLED_RGBCYCLIC_INTERVALS[0])) {
+    return;
+  }
+  last_timer = timer_read();
+  g = r = b = 0;
+  switch( pos ) {
+    case 0: r = RGBLIGHT_LIMIT_VAL; break;
+    case 1: g = RGBLIGHT_LIMIT_VAL; break;
+    case 2: b = RGBLIGHT_LIMIT_VAL; break;
+  }
+  rgblight_setrgb(r, g, b);
+  pos = (pos + 1) % 3;
+}
+
 #endif /* RGBLIGHT_ANIMATIONS */

keyboards/helix/rev2/keymaps/led_test/rgblight.h

@@ -17,7 +17,7 @@
 #define RGBLIGHT_H
 
 #ifdef RGBLIGHT_ANIMATIONS
-	#define RGBLIGHT_MODES 5
+	#define RGBLIGHT_MODES 35
 #else
 	#define RGBLIGHT_MODES 1
 #endif
@@ -74,14 +74,16 @@
 #include "ws2812.h"
 #endif
 #include "rgblight_types.h"
+#include "rgblight_list.h"
 
 extern LED_TYPE led[RGBLED_NUM];
 
-extern const uint16_t RGBLED_BREATHING_INTERVALS[4] PROGMEM; //modify for led_test
+extern const uint8_t RGBLED_BREATHING_INTERVALS[4] PROGMEM;
 extern const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[3] PROGMEM;
 extern const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[3] PROGMEM;
 extern const uint8_t RGBLED_SNAKE_INTERVALS[3] PROGMEM;
 extern const uint8_t RGBLED_KNIGHT_INTERVALS[3] PROGMEM;
+extern const uint16_t RGBLED_RGBCYCLIC_INTERVALS[1] PROGMEM;
 
 typedef union {
   uint32_t raw;
@@ -91,6 +93,7 @@ typedef union {
     uint16_t hue     :9;
     uint8_t  sat     :8;
     uint8_t  val     :8;
+    uint8_t  speed   :8;//EECONFIG needs to be increased to support this
   };
 } rgblight_config_t;
 
@@ -112,6 +115,8 @@ void rgblight_increase_sat(void);
 void rgblight_decrease_sat(void);
 void rgblight_increase_val(void);
 void rgblight_decrease_val(void);
+void rgblight_increase_speed(void);
+void rgblight_decrease_speed(void);
 void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val);
 uint16_t rgblight_get_hue(void);
 uint8_t rgblight_get_sat(void);
@@ -125,9 +130,21 @@ void eeconfig_update_rgblight(uint32_t val);
 void eeconfig_update_rgblight_default(void);
 void eeconfig_debug_rgblight(void);
 
+void rgb_matrix_increase(void);
+void rgb_matrix_decrease(void);
+
 void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1);
 void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1);
+
 void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val);
+void rgblight_mode_noeeprom(uint8_t mode);
+void rgblight_toggle_noeeprom(void);
+void rgblight_enable_noeeprom(void);
+void rgblight_disable_noeeprom(void);
+
+void rgblight_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, bool write_to_eeprom);
+void rgblight_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom);
+
 
 #define EZ_RGB(val) rgblight_show_solid_color((val >> 16) & 0xFF, (val >> 8) & 0xFF, val & 0xFF)
 void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b);
@@ -144,5 +161,6 @@ void rgblight_effect_rainbow_swirl(uint8_t interval);
 void rgblight_effect_snake(uint8_t interval);
 void rgblight_effect_knight(uint8_t interval);
 void rgblight_effect_christmas(void);
+void rgblight_effect_rgbcyclic(void);
 
 #endif

keyboards/hhkb/keymaps/dhertz/config.h

@@ -0,0 +1 @@
+#define USB_MAX_POWER_CONSUMPTION 100

keyboards/hhkb/keymaps/dhertz/keymap.c

@@ -0,0 +1,84 @@
+#include QMK_KEYBOARD_H
+#include "keymap.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Layer 0: Default Layer
+     * ,-----------------------------------------------------------.
+     * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Del|Bsp|
+     * |-----------------------------------------------------------|
+     * |Tab |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|Enter |
+     * |------------------------------------------------------`    |
+     * |SrCtl |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  \|    |
+     * |-----------------------------------------------------------|
+     * |Shift  |  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|  `|Up |Shi|
+     * |-----------------------------------------------------------|
+     * |NCt||  #|Alt|CmT|CmT|  LyrSpc |CGv|Iso|Gui|CSL||Rig|Dow|Lef|
+     * `-----------------------------------------------------------'
+     */
+    [0] = LAYOUT_JP(
+              KC_ESC,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL, KC_DEL,KC_BSPC,
+              KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,
+             SRCH_CTL,   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,  KC_SCLN,KC_QUOT,KC_NUHS, KC_ENT,
+              KC_LSFT,    KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT, KC_SLSH,KC_NUBS,  KC_UP,   KC_RSFT,
+              NC_CTL, HSH_TLD,KC_LALT,CMD_TAB_CMD,CMD_TAB_CMD, LT(2, KC_SPC)  , CMD_GRV_CMD, ISO_COUNTRY_CODE,KC_RGUI, CMD_SFT_L, KC_LEFT,KC_DOWN,KC_RGHT
+        ),
+
+  /* Layer 1: iPad mode (Fixed)
+   * ,-----------------------------------------------------------.
+   * |   |   |   |   |   |   |   |   |   |   |   |   |   |   |   |
+   * |-----------------------------------------------------------|
+   * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |
+   * |------------------------------------------------------`    |
+   * |CmdSpc|   |   |   |   |   |   |   |   |   |   |   |   |    |
+   * |-----------------------------------------------------------|
+   * |       |   |   |   |   |   |   |   |   |   |   |   |   |   |
+   * |-----------------------------------------------------------|
+   * |   ||  ~|   |CAD|   |         |CmH|   |   |   ||   |   |   |
+   * `-----------------------------------------------------------'
+   */
+  [1] = LAYOUT_JP(
+            KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+            KC_TRNS,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,  KC_TRNS,KC_TRNS,
+            CMD_SPC,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+            KC_TRNS,    KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,
+            KC_TRNS,  KC_TRNS,KC_TRNS,CMD_ALT_D,KC_TRNS,      KC_TRNS      ,CMD_H,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS
+  ),
+
+  /* Layer 2: HHKB mode (Space)
+   * ,-----------------------------------------------------------.
+   * |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
+   * |-----------------------------------------------------------|
+   * |Caps |DL0|DL1|   |   |   |   |   |Psc|Slk|Pus|Up |   |     |
+   * |------------------------------------------------------`    |
+   * |      |VoD|VoU|Mut|   |   |   |Bsp|Del|CSL|Lef|Rig|   |    |
+   * |-----------------------------------------------------------|
+   * |       |   |   |CAC|   |   |   |   |   |   |Dow|   |PgU|   |
+   * |-----------------------------------------------------------|
+   * |   ||  ~|   |   |   |         |   |   |   |   ||Hom|PgD|End|
+   * `-----------------------------------------------------------'
+   */
+  [2] = LAYOUT_JP(
+            KC_PWR,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12, KC_INS,KC_DEL,
+            KC_CAPS,  DF(0),  DF(1),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,  KC_UP,KC_TRNS,
+            KC_TRNS,   KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_TRNS,KC_BSPC, KC_DEL,CMD_SFT_L,KC_LEFT,KC_RGHT,KC_TRNS,KC_PENT,
+            KC_TRNS,    KC_TRNS,KC_TRNS,CMD_ALT_C,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_DOWN,KC_TRNS,KC_PGUP,KC_TRNS,
+            KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,      KC_TRNS      ,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_HOME,KC_PGDN, KC_END
+  ),
+};
+
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+    switch(keycode) {
+        case CMD_SPC:
+            mod_or_mod_with_macro(record, KC_LGUI, " ");
+            break;
+        case CMD_H:
+            mod_or_mod_with_macro(record, KC_RGUI, "H");
+            break;
+        case CMD_ALT_D:
+            mod_or_mod_with_macro(record, KC_LGUI, SS_LALT("D"));
+            break;
+        default:
+            return true;
+    }
+    return false;
+}

keyboards/hhkb/keymaps/dhertz/keymap.h

@@ -0,0 +1,7 @@
+#include "dhertz.h"
+
+enum dhertz_keycodes {
+    CMD_SPC = NEW_SAFE_RANGE,
+    CMD_H,
+    CMD_ALT_D,
+};

keyboards/hhkb/keymaps/dhertz/rules.mk

@@ -0,0 +1,2 @@
+OPT_DEFS += -DHHKB_JP
+

keyboards/iris/keymaps/drashna/config.h

@@ -33,7 +33,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #ifdef RGBLIGHT_ENABLE
 #undef RGBLED_NUM
-#define RGBLED_NUM 16     // Number of LEDs
+#define RGBLED_NUM 18     // Number of LEDs
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 12
 #define RGBLIGHT_SAT_STEP 12
@@ -58,4 +58,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT         Drashna Hacked Iris Rev.2
 #endif
 
+#define SHFT_LED1 6
+#define SHFT_LED2 11
+
+#define CTRL_LED1 7
+#define CTRL_LED2 10
+
+#define GUI_LED1 8
+#define GUI_LED2 9
+
 #endif

keyboards/iris/keymaps/drashna/keymap.c

@@ -2,15 +2,6 @@
 #include QMK_KEYBOARD_H
 #include "drashna.h"
 
-#ifdef INDICATOR_LIGHTS
-extern userspace_config_t userspace_config;
-
-uint8_t last_mod;
-uint8_t last_led;
-uint8_t last_osm;
-bool has_mods_changed = false;
-#endif
-
 #define KC_ALAP ALT_T(KC_APP)
 #define KC_OSLG OSM(MOD_LGUI)
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -55,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_LOWER] = LAYOUT_wrapper(
      _______, _________________FUNC_LEFT_________________,                       _________________FUNC_RIGHT________________, _______,
-     _______, _______, _______, _______, _______, _______,                       _______, _______, _______, _______, _______, _______,
+     KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                       KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
      _______, _______, _______, _______, _______, _______,                       _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
      _______, _______, _______, _______, _______, _______, _______,     _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______,
                                        _______, _______, _______,         _______, _______, _______
@@ -63,7 +54,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_RAISE] = LAYOUT_wrapper(
       _______, _________________FUNC_LEFT_________________,                      _________________FUNC_RIGHT________________, _______,
-      _______, _______, _______, _______, _______, _______,                      _______, _______, _______, _______, _______, _______,
+      KC_GRV,  ________________NUMBER_LEFT________________,                      ________________NUMBER_RIGHT_______________, _______,
       _______, _______, _______, _______, _______, _______,                      _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
       _______, _______, _______, _______, _______, _______, _______,    _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  _______,
                                         _______, _______, _______,        _______, _______, _______
@@ -71,93 +62,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_ADJUST] = LAYOUT_wrapper(
       KC_MAKE, _______, _______, _______, _______, _______,                      KC_SEC1, KC_SEC2, KC_SEC3, KC_SEC4, KC_SEC5, KC_RST,
-      VRSN,    RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_TOG,                      _______, _______, _______, _______, _______, EPRM,
+      VRSN,    RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_TOG,                      KC_NUKE, _______, _______, _______, _______, EPRM,
-      _______, _______, CK_TOGG, AU_ON,   AU_OFF,  AG_NORM,                      AG_SWAP, KC_QWERTY, KC_COLEMAK, KC_DVORAK, KC_WORKMAN, _______,
+      _______, _______, CK_TOGG, AU_ON,   AU_OFF,  AG_NORM,                      AG_SWAP, QWERTY,  COLEMAK, DVORAK,  WORKMAN, TG(_MODS),
-      TG(_MODS),RGB_SMOD,RGB_HUD,RGB_SAD, RGB_VAD, KC_RGB_T,_______,    _______, MG_NKRO, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY,
+      _______, RGB_SMOD,RGB_HUD, RGB_SAD, RGB_VAD, KC_RGB_T,_______,    _______, MG_NKRO, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY,
                                         _______, _______, _______,        _______, _______, _______
    )
 
 };
 
 
-void matrix_init_keymap(void) {
+bool indicator_is_this_led_used(uint8_t index) {
+  switch (index) {
 #ifdef INDICATOR_LIGHTS
-  last_mod = get_mods();
+    case SHFT_LED1:
-  last_led = host_keyboard_leds();
+    case SHFT_LED2:
-  last_osm =get_oneshot_mods();
+    case CTRL_LED1:
+    case CTRL_LED2:
+    case GUI_LED1:
+    case GUI_LED2:
+      return true;
+      break;
 #endif
-}
+    default:
-
+    return false;
-uint32_t layer_state_set_keymap (uint32_t state) {
-#ifdef INDICATOR_LIGHTS
-  uint8_t modifiders = get_mods();
-  uint8_t led_usb_state = host_keyboard_leds();
-  uint8_t one_shot = get_oneshot_mods();
-
-
-  if (modifiders & MODS_SHIFT_MASK || led_usb_state & (1<<USB_LED_CAPS_LOCK) || one_shot & MODS_SHIFT_MASK) {
-    rgblight_sethsv_at(0, 255, 255, 5);
-    rgblight_sethsv_at(0, 255, 255, 10);
   }
-  if (modifiders & MODS_CTRL_MASK || one_shot & MODS_CTRL_MASK) {
-    rgblight_sethsv_at(51, 255, 255, 6);
-    rgblight_sethsv_at(51, 255, 255, 9);
-  }
-  if (modifiders & MODS_ALT_MASK || one_shot & MODS_ALT_MASK) {
-    rgblight_sethsv_at(120, 255, 255, 7);
-    rgblight_sethsv_at(120, 255, 255, 8);
-  }
-#endif
-
-  return state;
-}
-
-
-void matrix_scan_keymap (void) {
-
-#ifdef INDICATOR_LIGHTS
-  uint8_t current_mod = get_mods();
-  uint8_t current_led = host_keyboard_leds();
-  uint8_t current_osm =get_oneshot_mods();
-
-  if (last_mod == current_mod) {
-    last_mod = current_mod;
-    has_mods_changed = true;
-  }
-  if (last_led == current_led) {
-    last_led = current_led;
-    has_mods_changed = true;
-  }
-  if (last_osm == current_osm) {
-    last_osm = current_osm;
-    has_mods_changed = true;
-  }
-
-
-  if (userspace_config.rgb_layer_change && has_mods_changed && biton32(layer_state) == 0) {
-    if (current_mod & MODS_SHIFT_MASK || current_led & (1<<USB_LED_CAPS_LOCK) || current_osm & MODS_SHIFT_MASK) {
-      rgblight_sethsv_at(0, 255, 255, 5);
-      rgblight_sethsv_at(0, 255, 255, 10);
-    } else {
-      rgblight_sethsv_default_helper(5);
-      rgblight_sethsv_default_helper(10);
-    }
-    if (current_mod & MODS_CTRL_MASK || current_osm & MODS_CTRL_MASK) {
-      rgblight_sethsv_at(51, 255, 255, 6);
-      rgblight_sethsv_at(51, 255, 255, 9);
-    } else {
-      rgblight_sethsv_default_helper(6);
-      rgblight_sethsv_default_helper(9);
-    }
-    if (current_mod & MODS_GUI_MASK || current_osm & MODS_GUI_MASK) {
-      rgblight_sethsv_at(120, 255, 255, 7);
-      rgblight_sethsv_at(120, 255, 255, 8);
-    } else {
-      rgblight_sethsv_default_helper(7);
-      rgblight_sethsv_default_helper(8);
-
-    }
-  }
-#endif
-
 }

keyboards/iris/keymaps/drashna/rules.mk

@@ -7,6 +7,9 @@ TAP_DANCE_ENABLE  = no
 RGBLIGHT_ENABLE   = yes
 AUDIO_ENABLE      = yes
 NKRO_ENABLE       = yes
-BACKLIGHT_ENABLE = no
+BACKLIGHT_ENABLE  = no
-SWAP_HANDS_ENABLE = yes
+SWAP_HANDS_ENABLE = no
+
 INDICATOR_LIGHTS  = yes
+MACROS_ENABLED    = no
+RGBLIGHT_TWINKLE  = yes

keyboards/iris/keymaps/drashna_old/config.h

@@ -0,0 +1,70 @@
+/*
+Copyright 2017 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+#undef USE_I2C
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+#ifdef RGBLIGHT_ENABLE
+#undef RGBLED_NUM
+#define RGBLED_NUM 16     // Number of LEDs
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_HUE_STEP 12
+#define RGBLIGHT_SAT_STEP 12
+#define RGBLIGHT_VAL_STEP 12
+#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
+#define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
+#define RGBLIGHT_EFFECT_BREATHE_CENTER 1
+
+#define RGBLIGHT_LIMIT_VAL 225
+#endif // RGBLIGHT_ENABLE
+
+#ifdef AUDIO_ENABLE
+#define C6_AUDIO
+#ifdef RGBLIGHT_ENABLE
+#define NO_MUSIC_MODE
+#endif //RGBLIGHT_ENABLE
+#endif //AUDIO_ENABLE
+
+
+#undef PRODUCT
+#ifdef KEYBOARD_iris_rev2
+#define PRODUCT         Drashna Hacked Iris Rev.2
+#endif
+
+#define SHFT_LED1 5
+#define SHFT_LED2 10
+
+#define CTRL_LED1 6
+#define CTRL_LED2 9
+
+#define GUI_LED1 7
+#define GUI_LED2 8
+
+#endif

keyboards/iris/keymaps/drashna_old/keymap.c

@@ -0,0 +1,89 @@
+
+#include QMK_KEYBOARD_H
+#include "drashna.h"
+
+#define KC_ALAP ALT_T(KC_APP)
+#define KC_OSLG OSM(MOD_LGUI)
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT_wrapper(
+     KC_ESC,  ________________NUMBER_LEFT________________,                       ________________NUMBER_RIGHT_______________, KC_MINS,
+     KC_TAB , _________________QWERTY_L1_________________,                       _________________QWERTY_R1_________________, KC_BSLS,
+     KC_CCCV, _________________QWERTY_L2_________________,                       _________________QWERTY_R2_________________, KC_QUOT,
+     KC_MLSF, _________________QWERTY_L3_________________, KC_ALAP,     KC_OSLG, _________________QWERTY_R3_________________, KC_MRSF,
+                             LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE
+  ),
+  [_COLEMAK] = LAYOUT_wrapper(
+     KC_ESC , ________________NUMBER_LEFT________________,                       ________________NUMBER_RIGHT_______________, KC_MINS,
+     KC_TAB , _________________COLEMAK_L1________________,                       _________________COLEMAK_R1________________, KC_BSLS,
+     KC_CCCV, _________________COLEMAK_L2________________,                       _________________COLEMAK_R2________________, KC_QUOT,
+     KC_MLSF, _________________COLEMAK_L3________________, KC_ALAP,     KC_OSLG, _________________COLEMAK_R3________________, KC_MRSF,
+                             LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE
+  ),
+  [_DVORAK] = LAYOUT_wrapper(
+     KC_ESC,  ________________NUMBER_LEFT________________,                       ________________NUMBER_RIGHT_______________, KC_MINS,
+     KC_TAB , _________________DVORAK_L1_________________,                       _________________DVORAK_R1_________________, KC_BSLS,
+     KC_CCCV, _________________DVORAK_L2_________________,                       _________________DVORAK_R2_________________, KC_QUOT,
+     KC_MLSF, _________________DVORAK_L3_________________, KC_ALAP,     KC_OSLG, _________________DVORAK_R3_________________, KC_MRSF,
+                             LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE
+  ),
+  [_WORKMAN] = LAYOUT_wrapper(
+     KC_ESC,  ________________NUMBER_LEFT________________,                       ________________NUMBER_RIGHT_______________, KC_MINS,
+     KC_TAB , _________________WORKMAN_L1________________,                       _________________WORKMAN_R1________________, KC_BSLS,
+     KC_CCCV, _________________WORKMAN_L2________________,                       _________________WORKMAN_R2________________, KC_QUOT,
+     KC_MLSF, _________________WORKMAN_L3________________, KC_ALAP,     KC_OSLG, _________________WORKMAN_R3________________, KC_MRSF,
+                             LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE
+  ),
+
+  [_MODS] = LAYOUT_wrapper(
+     _______, _______, _______, _______, _______, _______,                       _______, _______, _______, _______, _______, _______,
+     _______, _______, _______, _______, _______, _______,                       _______, _______, _______, _______, _______, _______,
+     _______, _______, _______, _______, _______, _______,                       _______, _______, _______, _______, _______, _______,
+     KC_LSFT, _______, _______, _______, _______, _______, _______,     _______, _______, _______, _______, _______, _______, KC_RSFT,
+                                       _______, _______, _______,         _______, _______, _______
+  ),
+
+
+  [_LOWER] = LAYOUT_wrapper(
+     _______, _________________FUNC_LEFT_________________,                       _________________FUNC_RIGHT________________, _______,
+     KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                       KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+     _______, _______, _______, _______, _______, _______,                       _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+     _______, _______, _______, _______, _______, _______, _______,     _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______,
+                                       _______, _______, _______,         _______, _______, _______
+  ),
+
+  [_RAISE] = LAYOUT_wrapper(
+      _______, _________________FUNC_LEFT_________________,                      _________________FUNC_RIGHT________________, _______,
+      KC_GRV,  ________________NUMBER_LEFT________________,                      ________________NUMBER_RIGHT_______________, _______,
+      _______, _______, _______, _______, _______, _______,                      _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+      _______, _______, _______, _______, _______, _______, _______,    _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  _______,
+                                        _______, _______, _______,        _______, _______, _______
+   ),
+
+  [_ADJUST] = LAYOUT_wrapper(
+      KC_MAKE, _______, _______, _______, _______, _______,                      KC_SEC1, KC_SEC2, KC_SEC3, KC_SEC4, KC_SEC5, KC_RST,
+      VRSN,    RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_TOG,                      KC_NUKE, _______, _______, _______, _______, EPRM,
+      _______, _______, CK_TOGG, AU_ON,   AU_OFF,  AG_NORM,                      AG_SWAP, QWERTY,  COLEMAK, DVORAK,  WORKMAN, TG(_MODS),
+      _______, RGB_SMOD,RGB_HUD, RGB_SAD, RGB_VAD, KC_RGB_T,_______,    _______, MG_NKRO, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY,
+                                        _______, _______, _______,        _______, _______, _______
+   )
+
+};
+
+
+bool indicator_is_this_led_used(uint8_t index) {
+  switch (index) {
+#ifdef INDICATOR_LIGHTS
+    case SHFT_LED1:
+    case SHFT_LED2:
+    case CTRL_LED1:
+    case CTRL_LED2:
+    case GUI_LED1:
+    case GUI_LED2:
+      return true;
+      break;
+#endif
+    default:
+    return false;
+  }
+}

keyboards/iris/keymaps/drashna_old/rules.mk

@@ -0,0 +1,17 @@
+USER_NAME := drashna
+
+BOOTMAGIC_ENABLE  = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE   = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE   = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE    = no         # Console for debug(+400)
+COMMAND_ENABLE    = no        # Commands for debug and configuration
+TAP_DANCE_ENABLE  = no
+RGBLIGHT_ENABLE   = yes
+AUDIO_ENABLE      = yes
+NKRO_ENABLE       = yes
+BACKLIGHT_ENABLE  = no
+SWAP_HANDS_ENABLE = no
+
+INDICATOR_LIGHTS  = yes
+MACROS_ENABLED    = no
+RGBLIGHT_TWINKLE  = yes

keyboards/iris/keymaps/krusli/README.md

@@ -0,0 +1,2 @@
+# krusli's Iris keymap
+Based off the default and Planck keymaps.

keyboards/iris/keymaps/krusli/config.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2017 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+// #define PREVENT_STUCK_MODIFIERS
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#endif

keyboards/iris/keymaps/krusli/keymap.c

@@ -0,0 +1,98 @@
+#include "iris.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT(
+    KC_ESC,   KC_1,    KC_2,     KC_3,     KC_4,     KC_5,                       KC_6,      KC_7,       KC_8,       KC_9,       KC_0,       KC_BSLS,
+    KC_TAB,   KC_Q,    KC_W,     KC_E,     KC_R,     KC_T,                       KC_Y,      KC_U,       KC_I,       KC_O,       KC_P,       KC_BSPC,
+    KC_LCTL,  KC_A,    KC_S,     KC_D,     KC_F,     KC_G,                       KC_H,      KC_J,       KC_K,       KC_L,       KC_SCLN,    KC_QUOT,
+    KC_LSFT,  KC_Z,    KC_X,     KC_C,     KC_V,     KC_B,    KC_HOME,  KC_END,  KC_N,      KC_M,       KC_COMM,    KC_DOT,     KC_SLSH,    KC_ENT,
+                                          KC_LGUI,  LOWER,    KC_SPC,   KC_SPC,  RAISE,      KC_LALT
+  ),
+
+  [_LOWER] = LAYOUT(
+    _______,  _______, _______,  _______,  _______,  _______,                    _______,   _______,    _______,    _______,    _______,    KC_PSCR,
+    KC_TILD,  KC_EXLM, KC_AT,    KC_HASH,  KC_DLR,   KC_PERC,                    KC_CIRC,   KC_AMPR,    KC_ASTR,    KC_LPRN,    KC_RPRN,    KC_BSPC,
+    _______,  KC_F1,   KC_F2,    KC_F3,    KC_F4,    KC_F5,                      KC_F6,     KC_UNDS,    KC_PLUS,    KC_LCBR,    KC_RCBR,    KC_PIPE,
+    _______,  KC_F7,   KC_F8,    KC_F9,    KC_F10,   KC_F11,   _______, _______, KC_F12,    _______,    KC_LEFT,    KC_DOWN,    KC_UP,      KC_RGHT,
+                                           _______,  _______,  _______, _______, _______,   _______
+  ),
+
+  [_RAISE] = LAYOUT(
+    _______,  _______, _______,  _______,  _______,  _______,                    _______,   _______,    _______,    _______,    _______,    KC_PSCR,
+    KC_GRV,   KC_1,    KC_2,     KC_3,     KC_4,     KC_5,                       KC_6,      KC_7,       KC_8,       KC_9,       KC_0,       KC_BSPC,
+    _______,  KC_F1,   KC_F2,    KC_F3,    KC_F4,    KC_F5,                      KC_F6,     KC_MINS,    KC_EQL,     KC_LBRC,    KC_RBRC,    KC_BSLS,
+    _______,  KC_F7,   KC_F8,    KC_F9,    KC_F10,   KC_F11,   _______, _______, KC_F12,    _______,    KC_LEFT,    KC_DOWN,    KC_UP,      KC_RGHT,
+                                           _______,  _______,  _______, _______, _______,   _______
+  ),
+
+  [_ADJUST] = LAYOUT(
+    _______, _______, _______,  _______,  _______,  _______,                    _______,  _______,    _______,    _______,    _______,    _______,
+    RGB_TOG, RGB_MOD, RGB_HUI,  RGB_SAI,  RGB_VAI,  _______,                    _______,  _______,    _______,    _______,    _______,    _______,
+    _______, _______, RGB_HUD,  RGB_SAD,  RGB_SAD,  RGB_VAD,                    _______,  _______,    _______,    _______,    _______,    _______,
+    BL_STEP, RESET,   _______,  _______,  _______,  _______,  _______, _______, _______,  _______,    _______,    _______,    _______,    _______,
+                                          _______,  _______,  _______, _______, _______,  _______
+  ),
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/iris/keymaps/krusli/rules.mk

@@ -0,0 +1,6 @@
+RGBLIGHT_ENABLE = no
+BACKLIGHT_ENABLE = no
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/iris/keymaps/mtdjr/config.h

@@ -20,6 +20,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
+#define SOLENOID_ENABLE
+#define SOLENOID_PIN C6
+
 /* Use I2C or Serial, not both */
 
 #define USE_SERIAL
@@ -28,7 +31,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Select hand configuration */
 
 #define MASTER_LEFT
-#define TAPPING_TERM 250
+
 // #define MASTER_RIGHT
 // #define EE_HANDS
 

keyboards/iris/keymaps/mtdjr/keymap.c

@@ -1,145 +1,8 @@
-#include "iris.h"
+#include QMK_KEYBOARD_H
-#include "action_layer.h"
+#include "mtdjr.h"
-#include "eeconfig.h"
-#include "action_macro.h"
-#include <timer.h>
-#include "pincontrol.h"
 
 extern keymap_config_t keymap_config;
 
-#define _QWERTY 0
-#define _LOWER 1
-#define _RAISE 2
-#define _SUPER 3
-#define _ADJUST 16
-#define SOLENOID_DEFAULT_DWELL 12
-#define SOLENOID_MAX_DWELL 100
-#define SOLENOID_MIN_DWELL 4
-#define SOLENOID_PIN C6
-
-
-bool solenoid_enabled = false;
-bool solenoid_on = false;
-bool solenoid_buzz = false;
-bool solenoid_buzzing = false;
-uint16_t solenoid_start = 0;
-uint8_t solenoid_dwell = SOLENOID_DEFAULT_DWELL;
-
-
-void solenoid_buzz_on(void) {
-  solenoid_buzz = true;
-}
-
-void solenoid_buzz_off(void) {
-  solenoid_buzz = false;
-}
-
-void solenoid_dwell_minus(void) {
-  if (solenoid_dwell > 0) solenoid_dwell--;
-}
-
-void solenoid_dwell_plus(void) {
-  if (solenoid_dwell < SOLENOID_MAX_DWELL) solenoid_dwell++;
-}
-
-void solenoid_toggle(void) {
-  solenoid_enabled = !solenoid_enabled;
-}
-
-void solenoid_stop(void) {
-  digitalWrite(SOLENOID_PIN, PinLevelLow);
-  solenoid_on = false;
-  solenoid_buzzing = false;
-}
-
-void solenoid_fire(void) {
-  if (!solenoid_enabled) return;
-
-  if (!solenoid_buzz && solenoid_on) return;
-  if (solenoid_buzz && solenoid_buzzing) return;
-
-  solenoid_on = true;
-  solenoid_buzzing = true;
-  solenoid_start = timer_read();
-  digitalWrite(SOLENOID_PIN, PinLevelHigh);
-}
-
-void solenoid_check(void) {
-  uint16_t elapsed = 0;
-
-  if (!solenoid_on) return;
-
-  elapsed = timer_elapsed(solenoid_start);
-
-  //Check if it's time to finish this solenoid click cycle
-  if (elapsed > solenoid_dwell) {
-    solenoid_stop();
-    return;
-  }
-
-  //Check whether to buzz the solenoid on and off
-  if (solenoid_buzz) {
-    if (elapsed / SOLENOID_MIN_DWELL % 2 == 0){
-      if (!solenoid_buzzing) {
-        solenoid_buzzing = true;
-        digitalWrite(SOLENOID_PIN, PinLevelHigh);
-      }
-    }
-    else {
-      if (solenoid_buzzing) {
-        solenoid_buzzing = false;
-        digitalWrite(SOLENOID_PIN, PinLevelLow);
-      }
-    }
-  }
-}
-
-void solenoid_setup(void) {
-  pinMode(SOLENOID_PIN, PinDirectionOutput);
-}
-
-void matrix_init_user(void) {
-  solenoid_setup();
-}
-
-void matrix_scan_user(void) {
-  solenoid_check();
-}
-
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE,
-  SUPER,
-  ADJUST,
-  SOL_TOG,
-  SOLENOID_DWELL_MINUS,
-  SOLENOID_DWELL_PLUS,
-  SOLENOID_BUZZ_ON,
-  SOLENOID_BUZZ_OFF,
-  TD_ESC = 0,
-};
-
-#define KC_ KC_TRNS
-#define _______ KC_TRNS
-
-#define KC_LOWR LOWER
-#define KC_RASE RAISE
-#define KC_SUPR SUPER
-#define KC_RST RESET
-#define KC_BL_S BL_STEP
-#define KC_EXC TD(TD_ESC)
-#define SOLTOG SOLENOID_TOG
-
-// Macro Declarations
-#define UM_ROOT M(0)
-#define UM_PPLY M(1)
-#define UM_PSEF M(2)
-#define KC_XCPY M(3)
-#define KC_XINS M(4)
-#define UM_CAD  M(5)
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_QWERTY] = LAYOUT_kc(
@@ -152,7 +15,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
       EQL, Z  , X  , C  , V  , B  ,LGUI,     LALT, N  , M  ,COMM,DOT ,SLSH,MINS,
   //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
-                       LCTL,RASE,SPC ,         SPC ,LOWR,SUPR
+                       LCTL,RASE,SPC ,         SPC ,LOWR,xxxx
   //                  `----+----+----'        `----+----+----'
   ),
 
@@ -178,130 +41,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|----+----+----+----+----+----|              |----+----+----+----+----+----|
          , F9 ,F10 ,F11 ,F12 ,    ,                   ,    ,    ,    ,    ,    ,
   //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
-         ,    ,    ,XCPY,XINS,    ,    ,         ,    ,    ,    ,    ,    ,PLUS,
+         ,    ,    ,XCPY,XINS,    ,    ,         ,    ,    ,    ,    ,    ,    ,
   //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
                            ,    ,    ,             ,    ,
   //                  `----+----+----'        `----+----+----'
   ),
 
-  [_SUPER] = LAYOUT(
+  [_ADJUST] = LAYOUT_kc(
-  //,--------+--------+--------+--------+--------+--------.                          ,--------+--------+--------+--------+--------+--------.
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
-      SOL_TOG, UM_ROOT, UM_PPLY, UM_PSEF, _______, _______,                            _______, _______, _______, _______, _______, _______,
+     STOG,ROOT,PPLY,PSEF,xxxx,xxxx,               xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,
-  //|--------+--------+--------+--------+--------+--------|                          |--------+--------+--------+--------+--------+--------|
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-      _______, _______, _______, _______, _______, _______,                            _______, KC_LBRC, _______, _______, _______, _______,
+     xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,               xxxx,xxxx,xxxx,xxxx,xxxx,BSLS,
-  //|--------+--------+--------+--------+--------+--------|                          |--------+--------+--------+--------+--------+--------|
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
-      _______, _______, _______, _______, _______, _______,                            _______, _______, _______, _______, _______, UM_CAD ,
+     xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,               xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,
-  //|--------+--------+--------+--------+--------+--------+--------.        ,--------|--------+--------+--------+--------+--------+--------|
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
-      _______, _______, _______, _______, _______, _______, _______,          _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY,
+     xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,     xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,xxxx,
-  //`--------+--------+--------+----+---+--------+--------+--------/        \--------+--------+--------+---+----+--------+--------+--------'
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
-                                      _______, _______, _______,                  _______, _______, _______
+                       xxxx,    ,xxxx,         xxxx,    ,
-  //                                `--------+--------+--------'                `--------+--------+--------'
+  //                  `----+----+----'        `----+----+----'
-)
+  )
-
-};
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-qk_tap_dance_action_t tap_dance_actions[] = {
-  //Tap once for grave accent, twice for ESC
-  [TD_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_GRV, KC_ESC)
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (record->event.pressed) {
-    solenoid_fire();
-  }
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        persistent_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case SUPER:
-      if (record->event.pressed) {
-        layer_on(_SUPER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_SUPER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case SOLTOG:
-      if (record->event.pressed) {
-        solenoid_toggle();
-      }
-      break;
-    case SOLENOID_DWELL_MINUS:
-      if (record->event.pressed) {
-        solenoid_dwell_minus();
-      }
-      break;
-    case SOLENOID_DWELL_PLUS:
-      if (record->event.pressed) {
-        solenoid_dwell_plus();
-      }
-      break;
-    case SOLENOID_BUZZ_ON:
-      if (record->event.pressed) {
-        solenoid_buzz_on();
-      }
-      break;
-    case SOLENOID_BUZZ_OFF:
-      if (record->event.pressed) {
-        solenoid_buzz_off();
-      }
-      break;
-  }
-  return true;
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  if (record->event.pressed) {
-      switch(id) {
-          case 0:
-              SEND_STRING("sudo su -\n");
-              return false; break;
-          case 1:
-              SEND_STRING("puppet apply /etc/puppetlabs/code/environments/production/manifests/site.pp\n");
-              return false; break;
-          case 2:
-              SEND_STRING("ps -ef | grep ");
-              return false; break;
-          case 3:
-              return MACRO(D(LCTL), T(INS), U(LCTL), END);
-              break;
-          case 4:
-              return MACRO(D(LSFT), T(INS), U(LSFT), END);
-              break;
-          case 5:
-              return MACRO(D(LCTL), D(RALT), T(DEL), END);
-              break;
-      }
-  }
-  return MACRO_NONE;
 };

keyboards/iris/keymaps/mtdjr/rules.mk

@@ -1,6 +1,5 @@
 RGBLIGHT_ENABLE = no
 BACKLIGHT_ENABLE = no
-TAP_DANCE_ENABLE = no
 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile

keyboards/jj40/matrix.c

@@ -51,7 +51,7 @@ void matrix_init(void) {
         matrix_debouncing[row] = 0x00;
     }
 
-    matrix_init_quantum();  // missing from original port by Luiz
+    matrix_init_quantum();
 }
 
 uint8_t matrix_scan(void) {
@@ -86,7 +86,7 @@ uint8_t matrix_scan(void) {
         }
     }
 
-    matrix_scan_quantum();  // also missing in original PS2AVRGB implementation
+    matrix_scan_quantum();
 
     return 1;
 }

keyboards/kbd8x/rules.mk

@@ -62,6 +62,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE ?= yes      # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/lets_split/keymaps/bbaserdem/README.md

@@ -0,0 +1,27 @@
+# Lets Split Layout
+
+Check out [user readme](../../../../users/bbaserdem/README.md) for more info.
+
+# Usage
+
+**These commands depend on there being no other arduino connected!**
+Also udev rules can be set instead of using sudo.
+Please unplug all other usb devices.
+
+To make the hex files;
+```
+make lets_split/rev2:bbaserdem
+make lets_split/rev2:bbaserdem_right
+```
+
+For the left half, after plugging in and resetting; (from repo main directory)
+```
+sudo avrdude -p atmega32u4 -P "$(ls /dev/ttyACM*)" -c avr109 -D -U flash:w:.build/lets_split_rev2_bbaserdem.hex
+sudo avrdude -p atmega32u4 -P "$(ls /dev/ttyACM*)" -c avr109 -U eeprom:w:keyboards/lets_split/eeprom-lefthand.eep
+```
+
+For the right half;
+```
+sudo avrdude -p atmgea34u4 -P "$(ls /dev/ttyACM*)" -c avr109 -D -U flash:w:.build/lets_split_rev2_bbaserdem_right.hex
+sudo avrdude -p atmega32u4 -P "$(ls /dev/ttyACM*)" -c avr109 -U eeprom:w:keyboards/lets_split/eeprom-righhand.eep
+```

keyboards/lets_split/keymaps/bbaserdem/config.h

@@ -0,0 +1,27 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define USE_SERIAL
+#define EE_HANDS
+
+// LED strip stuff
+#ifdef RGBLIGHT_ENABLE
+
+// Who thought it was a good idea to predefine these in the rev2/config.h ???
+#ifdef RGBLED_NUM
+#undef RGBLED_NUM
+#endif
+#define RGBLED_NUM 12
+
+#define RGBLIGHT_HUE_STEP 6
+#define RGBLIGHT_SAT_STEP 12
+#define RGBLIGHT_VAL_STEP 20
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_EFFECT_SNAKE_LENGTH 6
+#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 2000
+#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1
+#endif
+
+#endif

keyboards/lets_split/keymaps/bbaserdem/keymap.c

@@ -0,0 +1,37 @@
+/*
+ * Let's Split - Dvorak turkish
+ * Keymap by @bbaserdem
+ * Dvorak layout with multiple features
+ * Most of the code is in the "user" directory.
+ * Check qmk_firmware/users/bbaserdem for the main part of the code
+ */
+#define KEYMAP(...) LAYOUT_ortho_4x12(__VA_ARGS__)
+
+#include "lets_split.h"
+#include "bbaserdem.h"
+
+
+void matrix_init_keymap (void) {
+}
+
+uint32_t layer_state_set_keymap(uint32_t state) {
+    return state;
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    // Main Dvorak layer
+    [_DV] = DVORAK,
+    // Turkish and special character overlay
+    [_AL] = ALTCHAR,
+    // Gaming layer
+    [_GA] = GAME,
+    // Numbers layer
+    [_NU] = NUMBERS,
+    // Settings layer
+    [_SE] = SETTINGS,
+    // Mouse emulation layer
+    [_MO] = MOUSE,
+#ifdef AUDIO_ENABLE
+    [_MU] = MUSIC,
+#endif
+};

keyboards/lets_split/keymaps/bbaserdem/rules.mk

@@ -0,0 +1,11 @@
+# Build options
+
+BACKLIGHT_ENABLE = no		# Switch LEDs
+MOUSEKEY_ENABLE = yes		# Emulates mouse key using keypresses
+RGBLIGHT_ENABLE = yes 		# LED strips
+TAP_DANCE_ENABLE = no 		# Use multi-tap features
+AUDIO_ENABLE = no 			# Audio stuff
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/lets_split/keymaps/bbaserdem_right/README.md

@@ -0,0 +1,5 @@
+# Lets Split - Right Half
+
+Keymap for my right half, to be used as a numpad.
+Check [main readme](../bbaserdem/README.md) for flashing info.
+

keyboards/lets_split/keymaps/bbaserdem_right/config.h

@@ -0,0 +1,9 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define USE_SERIAL
+#define EE_HANDS
+
+#endif

keyboards/lets_split/keymaps/bbaserdem_right/keymap.c

@@ -0,0 +1,35 @@
+/*
+ * Let's Split - Dvorak turkish
+ * Keymap by @bbaserdem
+ * Dvorak layout with multiple features
+ * Most of the code is in the "user" directory.
+ * Check qmk_firmware/users/bbaserdem for the main part of the code
+ */
+
+#include "lets_split.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+        
+/*      Navigation All Supered)                        Numpad
+ * ,-----------------------. ,-----------------------.
+ * | F4| ` | Q |Alt| L | > | | ) | - | + | = |Ent|Bkp|
+ * |---+---+---+---+---+---| |---+---+---+---+---+---|
+ * | F3| M |Ent|Ctl| K | ^ | | ( | * | 9 | 6 | 3 | . |
+ * |---+---+---+---+---+---| |---+---+---+---+---+---|
+ * | F2| T |Spc|Shf| J | v | | % | / | 8 | 5 | 2 | , |
+ * |---+---+---+---+---+---| |---+---+---+---+---+---|
+ * | F1| F | P |Tab| H | < | |Nlc|Tab| 7 | 4 | 1 | 0 |
+ * `-----------------------' `-----------------------' 
+ */
+    // Main Dvorak layer
+    [0] = KEYMAP(
+        LGUI(KC_F4), LGUI(KC_GRV), LGUI(KC_Q),   LGUI(KC_LALT), LGUI(KC_L), LGUI(KC_RGHT),
+        KC_RPRN,     KC_PMNS,      KC_PPLS,      KC_PEQL,       KC_PENT, KC_BSPC,
+        LGUI(KC_F3), LGUI(KC_M),   LGUI(KC_ENT), LGUI(KC_LCTL), LGUI(KC_K), LGUI(KC_UP),
+        KC_LPRN,     KC_PAST,      KC_P9,        KC_P6,         KC_P3,   KC_PDOT,
+        LGUI(KC_F2), LGUI(KC_T),   LGUI(KC_SPC), LGUI(KC_LSFT), LGUI(KC_J), LGUI(KC_DOWN),
+        KC_PERC,     KC_PSLS,      KC_P8,        KC_P5,         KC_P2,   KC_PCMM,
+        LGUI(KC_F1), LGUI(KC_F),   LGUI(KC_P),   LGUI(KC_TAB),  LGUI(KC_H), LGUI(KC_LEFT),
+        KC_NLCK,     KC_TAB,       KC_P7,        KC_P4,         KC_P1,   KC_P0 )
+};

keyboards/lets_split/keymaps/bbaserdem_right/rules.mk

@@ -0,0 +1,24 @@
+# Build options
+
+BACKLIGHT_ENABLE = no		# Switch LEDs
+MOUSEKEY_ENABLE = no		# Emulates mouse key using keypresses
+RGBLIGHT_ENABLE = no 		# LED strips
+TAP_DANCE_ENABLE = no 		# Use multi-tap features
+AUDIO_ENABLE = no 			# Audio stuff
+BLUETOOTH_ENABLE = no 		# No bluetooth
+COMMAND_ENABLE = no			# Some bootmagic thing
+BOOTMAGIC_ENABLE = no 		# Access to EEPROM settings, not needed
+CONSOLE_ENABLE = no			# Allows console output with a command
+SLEEP_LED_ENABLE = no  		# Breathes LED's when computer is asleep. Untested.
+NKRO_ENABLE = no 			# Default is 6KRO which is plenty
+MIDI_ENABLE = no 			# Untested feature
+FAUXCLICKY_ENABLE = no 		# Emulates clicks using speaker
+KEY_LOCK_ENABLE = no 		# Allows locking any key. Not used
+API_SYSEX_ENABLE = no 		# Allows OS to send signals.
+KEY_LOCK_ENABLE = no 		# Allows locking any key. Not used
+UNICODE_ENABLE = no			# Used for unicode character emulation
+EXTRAKEY_ENABLE = no		# OS signals like volume control
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/lets_split/keymaps/mtdjr/config.h

@@ -23,11 +23,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "../../config.h"
 
+#define SOLENOID_ENABLE
+#define SOLENOID_PIN F4
+
 /* Use I2C or Serial, not both */
 
 // #define USE_SERIAL
  #define USE_I2C
- #define TAPPING_TERM 250
 /* Select hand configuration */
 
 // #define MASTER_LEFT

keyboards/lets_split/keymaps/mtdjr/keymap.c

@@ -1,194 +1,81 @@
-#include "lets_split.h"
+#include QMK_KEYBOARD_H
-#include "action_layer.h"
+#include "mtdjr.h"
-#include "eeconfig.h"
-#include "action_macro.h"
 
 extern keymap_config_t keymap_config;
 
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _LOWER 1
-#define _RAISE 2
-#define _ADJUST 16
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE,
-  ADJUST,
-  TD_ESC = 0
-};
-
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
-
-// Macro Declarations
-#define UM_ROOT M(0)
-#define UM_PPLY M(1)
-#define UM_COPY M(2)
-#define UM_INSR M(3)
-#define UM_PSEF M(4)
-
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  /* Qwerty
+    /* Qwerty
-  * ,-----------------------------------------.  ,-----------------------------------------.
+    * ,-----------------------------------------.  ,-----------------------------------------.
-  * | Tab  |   Q  |   W  |   E  |   R  |   T  |  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+    * | Tab  |   Q  |   W  |   E  |   R  |   T  |  |   Y  |   U  |   I  |   O  |   P  | Bksp |
-  * |------+------+------+------+------+------|  |------+------+------+------+------+------|
+    * |------+------+------+------+------+------|  |------+------+------+------+------+------|
-  * |Esc/~ |   A  |   S  |   D  |   F  |   G  |  |   H  |   J  |   K  |   L  |   ;  |  '/" |
+    * |Esc/~ |   A  |   S  |   D  |   F  |   G  |  |   H  |   J  |   K  |   L  |   ;  |  '/" |
-  * |------+------+------+------+------+------|  |------+------+------+------+------+------|
+    * |------+------+------+------+------+------|  |------+------+------+------+------+------|
-  * | Shift|   Z  |   X  |   C  |   V  |   B  |  |   N  |   M  |   ,  |   .  |   /  |Enter |
+    * | Shift|   Z  |   X  |   C  |   V  |   B  |  |   N  |   M  |   ,  |   .  |   /  |Enter |
-  * |------+------+------+------+------+------|  |------+------+------+------+------+------|
+    * |------+------+------+------+------+------|  |------+------+------+------+------+------|
-  * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |  |Space |Raise | Left |  Up  | Down |Right |
+    * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |  |Space |Raise | Left |  Up  | Down |Right |
-  * `-----------------------------------------'  '-----------------------------------------'
+    * `-----------------------------------------'  '-----------------------------------------'
-  */
+    */
-[_QWERTY] = LAYOUT( \
+  [_QWERTY] = LAYOUT( \
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
-  TD(TD_ESC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+    KC_EXC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_UP,   KC_DOWN, KC_RGHT \
+    ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_UP,   KC_DOWN, KC_RGHT \
-),
+  ),
 
-  /* Lower
+    /* Lower
-  * ,-----------------------------------------.  ,-----------------------------------------.
+    * ,-----------------------------------------.  ,-----------------------------------------.
-  * |   ~  |   1  |   2  |   3  |   4  |   5  |  |   6  |   7  |   8  |   9  |   0  | Bksp |
+    * |   ~  |   1  |   2  |   3  |   4  |   5  |  |   6  |   7  |   8  |   9  |   0  | Bksp |
-  * |------+------+------+------+------+------|  |------+------+------+------+------+------|
+    * |------+------+------+------+------+------|  |------+------+------+------+------+------|
-  * |      |      |   [  |   ]  |   {  |   }  |  |      |   4  |   5  |   6  |   *  |   \  |
+    * |      |      |   [  |   ]  |   {  |   }  |  |      |   4  |   5  |   6  |   *  |   \  |
-  * |------+------+------+------+------+------|  |------+------+------+------+------+------|
+    * |------+------+------+------+------+------|  |------+------+------+------+------+------|
-  * |Shift |      |      | copy |insert|      |  |      |   1  |   2  |   3  |   +  |   -  |
+    * |Shift |      |      | copy |insert|      |  |      |   1  |   2  |   3  |   +  |   -  |
-  * |------+------+------+------+------+------|  |------+------+------+------+------+------|
+    * |------+------+------+------+------+------|  |------+------+------+------+------+------|
-  * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |  |Space |Raise |   0  |   .  |   =  |   _  |
+    * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |  |Space |Raise |   0  |   .  |   =  |   _  |
-  * `-----------------------------------------'  '-----------------------------------------'
+    * `-----------------------------------------'  '-----------------------------------------'
-  */
+    */
-[_LOWER] = LAYOUT( \
+  [_LOWER] = LAYOUT( \
-  KC_TILD, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,  KC_9,   KC_0,    _______, \
+    KC_TILD, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,  KC_9,   KC_0,    _______, \
-  XXXXXXX, XXXXXXX, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, XXXXXXX, KC_4,    KC_5,  KC_6,   KC_ASTR, KC_BSLS, \
+    XXXXXXX, XXXXXXX, KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, XXXXXXX, KC_4,    KC_5,  KC_6,   KC_ASTR, KC_BSLS, \
-  _______, XXXXXXX, XXXXXXX, UM_COPY, UM_INSR, XXXXXXX, XXXXXXX, KC_1,    KC_2,  KC_3,   KC_PLUS, KC_MINS, \
+    _______, XXXXXXX, XXXXXXX, KC_XCPY, KC_XINS, XXXXXXX, XXXXXXX, KC_1,    KC_2,  KC_3,   KC_PLUS, KC_MINS, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_0,  KC_DOT, KC_EQL,  KC_UNDS \
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_0,  KC_DOT, KC_EQL,  KC_UNDS \
-),
+  ),
 
 
-/* Raise
+  /* Raise
- * ,-----------------------------------------.  ,-----------------------------------------.
+   * ,-----------------------------------------.  ,-----------------------------------------.
- * |   `  |   !  |   @  |   #  |   $  |   %  |  |   ^  |  &   |   *  |   (  |   )  | Bksp |
+   * |   `  |   !  |   @  |   #  |   $  |   %  |  |   ^  |  &   |   *  |   (  |   )  | Bksp |
- * |------+------+------+------+------+------|  |------+------+------+------+------+------|
+   * |------+------+------+------+------+------|  |------+------+------+------+------+------|
- * |      |      |      |      |      |      |  |      |      |      |      |   \  |   |  |
+   * |      |      |      |      |      |      |  |      |      |      |      |   \  |   |  |
- * |------+------+------+------+------+------|  |------+------+------+------+------+------|
+   * |------+------+------+------+------+------|  |------+------+------+------+------+------|
- * |Shift |      |      |      |      |      |  |      |      |      |      |      |      |
+   * |Shift |      |      |      |      |      |  |      |      |      |      |      |      |
- * |------+------+------+------+------+------|  |------+------+------+------+------+------|
+   * |------+------+------+------+------+------|  |------+------+------+------+------+------|
- * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |  |Space |Raise | Next | Vol- | Vol+ | Play |
+   * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |  |Space |Raise | Next | Vol- | Vol+ | Play |
- * `-----------------------------------------'  '-----------------------------------------'
+   * `-----------------------------------------'  '-----------------------------------------'
- */
+   */
-[_RAISE] = LAYOUT( \
+  [_RAISE] = LAYOUT( \
-  KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
+    KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
-  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BSLS, KC_PIPE,\
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_BSLS, KC_PIPE,\
-  _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
-),
+  ),
 
-  /* Adjust (Lower + Raise)
+    /* Adjust (Lower + Raise)
-  * ,-----------------------------------------.  ,-----------------------------------------.
+    * ,-----------------------------------------.  ,-----------------------------------------.
-  * |      | Reset|      |      |      |      |  | ROOT | PPLY | PSEF |      |      |  Del |
+    * |      | Reset|      |      |      |      |  | ROOT | PPLY | PSEF |      |      |  Del |
-  * |------+------+------+------+------+------|  |------+------+------+------+------+------|
+    * |------+------+------+------+------+------|  |------+------+------+------+------+------|
-  * |      |      |      |Aud on|Audoff|      |  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |
+    * |      |      |      |Aud on|Audoff|      |  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |
-  * |------+------+------+------+------+------|  |------+------+------+------+------+------|
+    * |------+------+------+------+------+------|  |------+------+------+------+------+------|
-  * |      | UNDO | CUT  | COPY |PASTE |      |  |  F7  |  F8  |  F9  |  F10 | F11  |  F12 |
+    * |      | UNDO | CUT  | COPY |PASTE |      |  |  F7  |  F8  |  F9  |  F10 | F11  |  F12 |
-  * |------+------+------+------+------+------|  |------+------+------+------+------+------|
+    * |------+------+------+------+------+------|  |------+------+------+------+------+------|
-  * |      |      |      |      |      |      |  |      |      | Home |      |      | End  |
+    * |      |      |      |      |      |      |  |      |      | Home |      |      | End  |
-  * `-----------------------------------------'  '-----------------------------------------'
+    * `-----------------------------------------'  '-----------------------------------------'
-  */
+    */
-[_ADJUST] =  LAYOUT( \
+  [_ADJUST] =  LAYOUT( \
-  _______, UM_ROOT, UM_PPLY, UM_PSEF, _______, _______, RESET,   _______, _______, _______, _______, KC_DEL, \
+    KC_STOG, KC_ROOT, KC_PPLY, KC_PSEF, _______, _______, RESET,   _______, _______, _______, _______, KC_DEL, \
-  _______, _______, _______, AU_ON,   AU_OFF,  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6, \
+    _______, _______, _______, AU_ON,   AU_OFF,  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6, \
-  _______, KC_UNDO, KC_CUT,  UM_COPY, UM_INSR, _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+    _______, KC_UNDO, KC_CUT,  KC_XCPY, KC_XINS, _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, _______, _______, KC_END \
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, _______, _______, KC_END \
-)
+  )
-
+};
-
-};
-
-#ifdef AUDIO_ENABLE
-float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
-#endif
-
-void persistent_default_layer_set(uint16_t default_layer) {
-  eeconfig_update_default_layer(default_layer);
-  default_layer_set(default_layer);
-}
-
-qk_tap_dance_action_t tap_dance_actions[] = {
-  //Tap once for nothing, twice for ESC
-  [TD_ESC]  = ACTION_TAP_DANCE_DOUBLE(KC_NO, KC_ESC)
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        #ifdef AUDIO_ENABLE
-          PLAY_SONG(tone_qwerty);
-        #endif
-        persistent_default_layer_set(1UL<<_QWERTY);
-      }
-      return false;
-      break;
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  if (record->event.pressed) {
-      switch(id) {
-          case 0:
-              SEND_STRING("sudo su -\n");
-              return false; break;
-          case 1:
-              SEND_STRING("puppet apply /etc/puppetlabs/code/environments/production/manifests/site.pp\n");
-              return false; break;
-          case 2:
-              return MACRO(D(LCTL), T(INS), U(LCTL), END);
-              break;
-          case 3:
-              return MACRO(D(LSFT), T(INS), U(LSFT), END);
-              break;
-          case 4:
-              SEND_STRING("ps -ef | grep ");
-              return false; break;
-      }
-  }
-  return MACRO_NONE;
-};

keyboards/lets_split/keymaps/mtdjr/rules.mk

@@ -1,4 +1,3 @@
-TAP_DANCE_ENABLE = yes
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
 endif