Fix parentheses in macros, and in general clean up quantum.h (#5021)

* Fix up GPIO macros

* Fix up send string macros

`string` arguments must not be parenthesized

* Fix up miscellaneous macros

* Make indentation uniform (4 spaces)

* Make #ifdef vs #if defined usage consistent

* Reorder standard includes

* Revert indentation changes as per review comments

* Revert #if defined(__AVR__) → #ifdef __AVR__ change

* Change 2 space indent to 4 spaces on a couple of lines

* Replace include guard with #pragma once

.editorconfig

@@ -19,9 +19,11 @@ indent_size = 4
 # Make these match what we have in .gitattributes
 [*.mk]
 end_of_line = lf
+indent_style = tab
 
 [Makefile]
 end_of_line = lf
+indent_style = tab
 
 [*.sh]
 end_of_line = lf

common_features.mk

@@ -133,7 +133,7 @@ ifeq ($(strip $(LED_MATRIX_ENABLE)), IS31FL3731)
     OPT_DEFS += -DIS31FL3731
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3731-simple.c
-    SRC += i2c_master.c
+    QUANTUM_LIB_SRC += i2c_master.c
 endif
 
 RGB_MATRIX_ENABLE ?= no
@@ -157,21 +157,21 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
     OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3731.c
-    SRC += i2c_master.c
+    QUANTUM_LIB_SRC += i2c_master.c
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
     OPT_DEFS += -DIS31FL3733 -DSTM32_I2C -DHAL_USE_I2C=TRUE
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3733.c
-    SRC += i2c_master.c
+    QUANTUM_LIB_SRC += i2c_master.c
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3737)
     OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE
     COMMON_VPATH += $(DRIVER_PATH)/issi
     SRC += is31fl3737.c
-    SRC += i2c_master.c
+    QUANTUM_LIB_SRC += i2c_master.c
 endif
 
 ifeq ($(strip $(RGB_MATRIX_ENABLE)), WS2812)
@@ -271,7 +271,7 @@ ifeq ($(strip $(HAPTIC_ENABLE)), DRV2605L)
     COMMON_VPATH += $(DRIVER_PATH)/haptic
     SRC += haptic.c
     SRC += DRV2605L.c
-    SRC += i2c_master.c
+    QUANTUM_LIB_SRC += i2c_master.c
     OPT_DEFS += -DHAPTIC_ENABLE
     OPT_DEFS += -DDRV2605L
 endif

docs/feature_oled_driver.md

@@ -14,7 +14,7 @@ Tested combinations:
 
 Hardware configurations using ARM-based microcontrollers or different sizes of OLED modules may be compatible, but are untested.
 
-!> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses i2c to communication between sides this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. 
+!> Warning: This OLED Driver currently uses the new i2c_master driver from split common code. If your split keyboard uses I2C to communicate between sides, this driver could cause an address conflict (serial is fine). Please contact your keyboard vendor and ask them to migrate to the latest split common code to fix this. In addition, the display timeout system to reduce OLED burn-in also uses split common to detect keypresses, so you will need to implement custom timeout logic for non-split common keyboards.
 
 ## Usage
 

docs/feature_space_cadet.md

@@ -43,6 +43,7 @@ By default Space Cadet assumes a US ANSI layout, but if your layout uses differe
 |`LAPO_KEYS`     |`KC_LALT, KC_LSFT, KC_9`       |Send `KC_LALT` when held, the mod `KC_LSFT` with the key `KC_9` when tapped.     |
 |`RAPC_KEYS`     |`KC_RALT, KC_RSFT, KC_0`       |Send `KC_RALT` when held, the mod `KC_RSFT` with the key `KC_0` when tapped.     |
 |`SFTENT_KEYS`   |`KC_RSFT, KC_TRNS, SFTENT_KEY` |Send `KC_RSFT` when held, no mod with the key `SFTENT_KEY` when tapped.          |
+|`SPACE_CADET_MODIFIER_CARRYOVER`   |*Not defined* |Store current modifiers before the hold mod is pressed and use them with the tap mod and keycode. Useful for when you frequently release a modifier before triggering Space Cadet.  |
 
 
 ## Obsolete Configuration

drivers/qwiic/qwiic.mk

@@ -2,9 +2,7 @@ ifneq ($(strip $(QWIIC_ENABLE)),)
   COMMON_VPATH += $(DRIVER_PATH)/qwiic
   OPT_DEFS += -DQWIIC_ENABLE
   SRC += qwiic.c
-  ifeq ($(filter "i2c_master.c", $(SRC)),)
+  QUANTUM_LIB_SRC += i2c_master.c
-    SRC += i2c_master.c
-  endif
 endif
 
 ifneq ($(filter JOYSTIIC, $(QWIIC_ENABLE)),)

keyboards/40percentclub/gherkin/keymaps/michel/config.h

@@ -0,0 +1,13 @@
+#pragma once
+
+#undef RGB_DI_PIN
+#undef RGBLED_NUM
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 10
+
+/* Make layout upside down = USB port on left side */
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
+#define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B4 }

keyboards/40percentclub/gherkin/keymaps/michel/keymap.c

@@ -0,0 +1,8 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT_ortho_3x10(KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(1, KC_ENT), LSFT_T(KC_Z), LALT_T(KC_X), LGUI_T(KC_C), KC_V, KC_BSPC, KC_SPC, RGUI_T(KC_B), LT(3, KC_N), LT(2, KC_M), KC_RSFT),
+	[1] = LAYOUT_ortho_3x10(KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT),
+	[2] = LAYOUT_ortho_3x10(KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LBRC, KC_NO, KC_SCLN, KC_NO, KC_QUOT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSFT),
+	[3] = LAYOUT_ortho_3x10(KC_TAB, KC_UP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO)
+};

keyboards/40percentclub/gherkin/keymaps/michel/rules.mk

@@ -0,0 +1,3 @@
+BACKLIGHT_ENABLE = no
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/crkbd/keymaps/vxid/README.md

@@ -0,0 +1,3 @@
+# Vxid crkbd layout
+
+Inspired by sdothum's wide planck layout.

keyboards/crkbd/keymaps/vxid/config.h

@@ -0,0 +1,44 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <[email protected]>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+#define MASTER_RIGHT
+// #define EE_HANDS
+
+#define SSD1306OLED
+
+#define USE_SERIAL_PD2
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 100
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 27
+#define RGBLIGHT_LIMIT_VAL 120
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17

keyboards/crkbd/keymaps/vxid/keymap.c

@@ -0,0 +1,85 @@
+#include QMK_KEYBOARD_H
+#include "bootloader.h"
+#ifdef PROTOCOL_LUFA
+  #include "lufa.h"
+  #include "split_util.h"
+#endif
+
+extern keymap_config_t keymap_config;
+
+extern uint8_t is_master;
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE
+};
+
+#define KC______ KC_TRNS
+#define KC_XXXXX KC_NO
+#define KC_LOWER LOWER
+#define KC_RAISE RAISE
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_kc( \
+  //,-----------------------------------------.                ,-----------------------------------------.
+          Q,     W,     E,     R,     T,   ESC,                    DEL,     Y,     U,     I,     O,     P,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+          A,     S,     D,     F,     G,   SPC,                   BSPC,     H,     J,     K,     L,  SCLN,\
+  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
+          Z,     X,     C,     V,     B,   TAB,                    ENT,     N,     M,  COMM,   DOT,  SLSH,\
+  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
+                                   LALT,  LGUI,  LCTL,     LSFT, RAISE, LOWER \
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_LOWER] = LAYOUT_kc( \
+  //,-----------------------------------------.                ,------------------------------------------.
+          1,     2,     3,     4,     5, XXXXX,                   XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+  //|------+------+------+------+------+------|                |-------+------+------+------+------+------|
+          6,     7,     8,     9,     0, XXXXX,                   XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+  //|------+------+------+------+------+------|                |-------+------+------+------+------+------|
+        EQL,  PLUS,  MINS,  SLSH,  ASTR, XXXXX,                   XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+  //|------+------+------+------+------+------+------|  |------+-------+------+------+------+------+------|
+                                   LALT,  LGUI,  LCTL,     LSFT, RAISE, LOWER \
+                              //`--------------------'  `--------------------'
+  ),
+
+  [_RAISE] = LAYOUT_kc( \
+  //,-----------------------------------------.                ,------------------------------------------.
+       EXLM,    AT,  HASH,   DLR,  PERC,  LPRN,                    RPRN, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+  //|------+------+------+------+------+------|                |-------+------+------+------+------+------|
+       CIRC,  AMPR,  ASTR,  QUOT,  DQUO,  LCBR,                    RCBR,  LEFT,  DOWN,    UP, RIGHT, XXXXX,\
+  //|------+------+------+------+------+------|                |-------+------+------+------+------+------|
+       BSLS,  TILD,   GRV,  UNDS,  PIPE,  LBRC,                    RBRC, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
+  //|------+------+------+------+------+------+------|  |------+-------+------+------+------+------+------|
+                                   LALT,  LGUI,  LCTL,     LSFT, RAISE, LOWER \
+                              //`--------------------'  `--------------------'
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+      } else {
+        layer_off(_LOWER);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+      } else {
+        layer_off(_RAISE);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/crkbd/keymaps/vxid/rules.mk

@@ -0,0 +1,31 @@
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no        # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
+SWAP_HANDS_ENABLE = no      # Enable one-hand typing
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+# If you want to change the display of OLED, you need to change here
+SRC +=  ./lib/glcdfont.c \
+        ./lib/rgb_state_reader.c \
+        ./lib/layer_state_reader.c \
+        ./lib/logo_reader.c \
+        ./lib/keylogger.c \
+        # ./lib/mode_icon_reader.c \
+        # ./lib/host_led_state_reader.c \
+        # ./lib/timelogger.c \

keyboards/ergodox_ez/rules.mk

@@ -16,6 +16,7 @@
 
 # # project specific files
 SRC += matrix.c
+QUANTUM_LIB_SRC += i2c_master.c
 
 # MCU name
 MCU = atmega32u4
@@ -85,9 +86,4 @@ RGBLIGHT_ENABLE = yes
 RGB_MATRIX_ENABLE = no # enable later
 DEBOUNCE_TYPE = eager_pr
 
-ifeq ($(strip $(RGB_MATRIX_ENABLE)), no)
-  SRC += i2c_master.c
-endif
-
-
 LAYOUTS = ergodox

keyboards/espectro/info.json

@@ -117,6 +117,117 @@
       ]
     },
 
+    "LAYOUT_split_bs_joined_right": {
+      "key_count": 100,
+      "layout": [
+        {"label": "K00", "x": 0, "y": 0},
+        {"label": "K01", "x": 1, "y": 0},
+        {"label": "K02", "x": 2, "y": 0},
+        {"label": "K03", "x": 3, "y": 0},
+        {"label": "K04", "x": 4, "y": 0},
+        {"label": "K60", "x": 5, "y": 0},
+        {"label": "K61", "x": 6, "y": 0},
+        {"label": "K62", "x": 7, "y": 0},
+        {"label": "K63", "x": 8, "y": 0},
+        {"label": "K05", "x": 9, "y": 0},
+        {"label": "K06", "x": 10, "y": 0},
+        {"label": "K07", "x": 11, "y": 0},
+        {"label": "K08", "x": 12, "y": 0},
+        {"label": "K72", "x": 13, "y": 0},
+        {"label": "K09", "x": 14, "y": 0},
+        {"label": "K0A", "x": 15, "y": 0},
+        {"label": "K0B", "x": 16, "y": 0},
+        {"label": "K0C", "x": 17, "y": 0},
+        {"label": "K7C", "x": 18, "y": 0},
+
+        {"label": "K10", "x": 0, "y": 1},
+        {"label": "K11", "x": 1, "y": 1},
+        {"label": "K12", "x": 2, "y": 1},
+        {"label": "K13", "x": 3, "y": 1},
+        {"label": "K14", "x": 4, "y": 1},
+        {"label": "K64", "x": 5, "y": 1},
+        {"label": "K65", "x": 6, "y": 1},
+        {"label": "K66", "x": 7, "y": 1},
+        {"label": "K67", "x": 8, "y": 1},
+        {"label": "K15", "x": 9, "y": 1},
+        {"label": "K16", "x": 10, "y": 1},
+        {"label": "K17", "x": 11, "y": 1},
+        {"label": "K18", "x": 12, "y": 1},
+        {"label": "K70", "x": 13, "y": 1},
+        {"label": "K71", "x": 14, "y": 1},
+        {"label": "K19", "x": 15, "y": 1},
+        {"label": "K1A", "x": 16, "y": 1},
+        {"label": "K1B", "x": 17, "y": 1},
+        {"label": "K1C", "x": 18, "y": 1},
+
+        {"label": "K20", "x": 0, "y": 2, "w": 1.5},
+        {"label": "K21", "x": 1.5, "y": 2},
+        {"label": "K22", "x": 2.5, "y": 2},
+        {"label": "K23", "x": 3.5, "y": 2},
+        {"label": "K24", "x": 4.5, "y": 2},
+        {"label": "K68", "x": 5.5, "y": 2},
+        {"label": "K69", "x": 6.5, "y": 2},
+        {"label": "K6A", "x": 7.5, "y": 2},
+        {"label": "K6B", "x": 8.5, "y": 2},
+        {"label": "K25", "x": 9.5, "y": 2},
+        {"label": "K26", "x": 10.5, "y": 2},
+        {"label": "K27", "x": 11.5, "y": 2},
+        {"label": "K28", "x": 12.5, "y": 2},
+        {"label": "K73", "x": 13.5, "y": 2, "w": 1.5},
+        {"label": "K29", "x": 15, "y": 2},
+        {"label": "K2A", "x": 16, "y": 2},
+        {"label": "K2B", "x": 17, "y": 2},
+        {"label": "K2C", "x": 18, "y": 2, "h": 2},
+
+        {"label": "K30", "x": 0, "y": 3, "w": 1.75},
+        {"label": "K31", "x": 1.75, "y": 3},
+        {"label": "K32", "x": 2.75, "y": 3},
+        {"label": "K33", "x": 3.75, "y": 3},
+        {"label": "K34", "x": 4.75, "y": 3},
+        {"label": "K6C", "x": 5.75, "y": 3},
+        {"label": "K75", "x": 6.75, "y": 3},
+        {"label": "K76", "x": 7.75, "y": 3},
+        {"label": "K77", "x": 8.75, "y": 3},
+        {"label": "K35", "x": 9.75, "y": 3},
+        {"label": "K36", "x": 10.75, "y": 3},
+        {"label": "K37", "x": 11.75, "y": 3},
+        {"label": "K38", "x": 12.75, "y": 3, "w": 2.25},
+        {"label": "K39", "x": 15, "y": 3},
+        {"label": "K3A", "x": 16, "y": 3},
+        {"label": "K3B", "x": 17, "y": 3},
+
+        {"label": "K40", "x": 0, "y": 4, "w": 2.25},
+        {"label": "K42", "x": 2.25, "y": 4},
+        {"label": "K43", "x": 3.25, "y": 4},
+        {"label": "K44", "x": 4.25, "y": 4},
+        {"label": "K78", "x": 5.25, "y": 4},
+        {"label": "K79", "x": 6.25, "y": 4},
+        {"label": "K7A", "x": 7.25, "y": 4},
+        {"label": "K7B", "x": 8.25, "y": 4},
+        {"label": "K45", "x": 9.25, "y": 4},
+        {"label": "K46", "x": 10.25, "y": 4},
+        {"label": "K47", "x": 11.25, "y": 4},
+        {"label": "K48", "x": 12.25, "y": 4, "w": 1.75},
+        {"label": "K74", "x": 14, "y": 4},
+        {"label": "K49", "x": 15, "y": 4},
+        {"label": "K4A", "x": 16, "y": 4},
+        {"label": "K4B", "x": 17, "y": 4},
+        {"label": "K4C", "x": 18, "y": 4, "h": 2},
+
+        {"label": "K50", "x": 0, "y": 5, "w": 1.25},
+        {"label": "K51", "x": 1.25, "y": 5, "w": 1.25},
+        {"label": "K52", "x": 2.5, "y": 5, "w": 1.25},
+        {"label": "K59", "x": 3.75, "y": 5, "w": 6.25},
+        {"label": "K55", "x": 10, "y": 5, "w": 1.5},
+        {"label": "K57", "x": 11.5, "y": 5, "w": 1.5},
+        {"label": "K58", "x": 13, "y": 5},
+        {"label": "K53", "x": 14, "y": 5},
+        {"label": "K54", "x": 15, "y": 5},
+        {"label": "K5A", "x": 16, "y": 5},
+        {"label": "K5B", "x": 17, "y": 5}
+      ]
+    },
+
     "LAYOUT_split_shift_and_bs": {
       "key_count": 104,
       "layout": [

keyboards/gh60/info.json

@@ -247,7 +247,6 @@
                 {"label":"P", "x":10.5, "y":1},
                 {"label":"{", "x":11.5, "y":1},
                 {"label":"}", "x":12.5, "y":1},
-                {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
                 {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
                 {"label":"A", "x":1.75, "y":2},
                 {"label":"S", "x":2.75, "y":2},
@@ -261,6 +260,7 @@
                 {"label":":", "x":10.75, "y":2},
                 {"label":"@", "x":11.75, "y":2},
                 {"label":"~", "x":12.75, "y":2},
+                {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2},
                 {"label":"Shift", "x":0, "y":3, "w":1.25},
                 {"label":"|", "x":1.25, "y":3},
                 {"label":"Z", "x":2.25, "y":3},

keyboards/gonnerd/keymaps/gam3cat/keymap.c

@@ -12,10 +12,10 @@ enum layers {
 };
 
 enum custom_keycodes {
-    DYNAMIC_MACRO_RANGE = SAFE_RANGE,
+    QMK_REV = SAFE_RANGE,
-    QMK_REV,
     KC_WEB,
-    KC_SP4
+    KC_SP4,
+    DYNAMIC_MACRO_RANGE
 };
 
 extern backlight_config_t backlight_config;

keyboards/gonnerd/keymaps/gam3cat/rules.mk

@@ -22,4 +22,3 @@ FAUXCLICKY_ENABLE = no      # Uses buzzer to emulate clicky switches.  By defaul
 API_SYSEX_ENABLE = no       # This enables using the Quantum SYSEX API to send strings(+5390)
 KEY_LOCK_ENABLE = no        # This enables key lock(+260)
 SPLIT_KEYBOARD = no         # This enables split keyboard support and includes all necessary files located at quantum/split_common
-

keyboards/hineybush/h87a/keymaps/gam3cat/keymap.c

@@ -12,10 +12,10 @@ enum layers {
 };
 
 enum custom_keycodes {
-    DYNAMIC_MACRO_RANGE = SAFE_RANGE,
+    QMK_REV = SAFE_RANGE,
-    QMK_REV,
     KC_WEB,
-    KC_SP4
+    KC_SP4,
+    DYNAMIC_MACRO_RANGE
 };
 
 extern backlight_config_t backlight_config;
@@ -259,11 +259,11 @@ uint32_t layer_state_set_user(uint32_t state) {
             break;
         case _FL:
             custom_backlight_level(2);
-            rgblight_sethsv_noeeprom(280,255,255);
+            rgblight_sethsv_noeeprom(240,255,255);
             break;
         case _AL:
             custom_backlight_level(3);
-            rgblight_sethsv_noeeprom(350,255,255);
+            rgblight_sethsv_noeeprom(255,255,255);
             break;
         default:
             custom_backlight_level(0);

keyboards/idobo/keymaps/greenshadowmaker/keyboard-layout-editor-gsm-idobo.json

@@ -101,7 +101,7 @@
     },
     "",
     "UP",
-    "",
+    "PrtScr",
     "H",
     "J",
     "K",
@@ -182,9 +182,9 @@
       "c": "#cccccc",
       "t": "#000000"
     },
-    "",
+    "Left",
-    "",
+    "Down",
-    "",
+    "Up",
-    "PrtScr"
+    "Right"
   ]
 ]

keyboards/idobo/keymaps/greenshadowmaker/keymap.c

@@ -1,40 +1,38 @@
 #include QMK_KEYBOARD_H
 
-extern keymap_config_t keymap_config;
-
-#define _QWERTY 0
-#define _LOWER 1
-#define _RAISE 2
-#define _ADJUST 16
-
 enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
+  LOWER = SAFE_RANGE,
-  LOWER,
   RAISE,
-  ADJUST,
+};
+
+enum layer_names {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ADJUST,
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* QWERTY
  * .--------------------------------------------------------------------------------------------------------------------------------------.
- * | ESC    | 1      | 2      | 3      | 4      | 5      | -      |        | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+ * | ESC    | 1      | 2      | 3      | 4      | 5      | =      |        | -      | 6      | 7      | 8      | 9      | 0      | BACKSP |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
  * | TAB    | Q      | W      | E      | R      | T      |        |        | [      | Y      | U      | I      | O      | P      | ]      |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
- * | RAISE  | A      | S      | D      | F      | G      |        | UP     |        | H      | J      | K      | L      | ;      | '      |
+ * | RAISE  | A      | S      | D      | F      | G      |        | UP     | PrtScr | H      | J      | K      | L      | ;      | '      |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
  * | LSHIFT | Z      | X      | C      | V      | B      | LEFT   | DOWN   | RIGHT  | N      | M      | ,      | .      | /      | RSHIFT |
  * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
- * | `      | \      | LALT   | LCTRL  | LOWER  | SPACE  | LGUI   | DEL    | ENTER  | SPACE  | RAISE  |        |        |        | PrtScr |
+ * | `      | \      | LALT   | LCTRL  | LOWER  | SPACE  | LGUI   | DEL    | ENTER  | SPACE  | RAISE  |  LEFT  |  DOWN  |  UP    | RIGHT  |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
-[_QWERTY] = LAYOUT_ortho_5x15( \
+[_QWERTY] = LAYOUT_ortho_5x15( 
-    KC_ESC,     KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS, XXXXXXX,    KC_EQL,   KC_6,    KC_7,    KC_8,       KC_9,     KC_0, KC_BSPC,  \
+    KC_ESC,     KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_EQL,  XXXXXXX,   KC_MINS,   KC_6,    KC_7,    KC_8,       KC_9,     KC_0, KC_BSPC,  
-    KC_TAB,     KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    XXXXXXX, XXXXXXX,   KC_LBRC,   KC_Y,    KC_U,    KC_I,       KC_O,     KC_P, KC_RBRC,  \
+    KC_TAB,     KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    XXXXXXX, XXXXXXX,   KC_LBRC,   KC_Y,    KC_U,    KC_I,       KC_O,     KC_P, KC_RBRC,  
-     RAISE,     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    XXXXXXX,   KC_UP,   XXXXXXX,   KC_H,    KC_J,    KC_K,       KC_L,  KC_SCLN, KC_QUOT, \
+     RAISE,     KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    XXXXXXX,   KC_UP,   KC_PSCR,   KC_H,    KC_J,    KC_K,       KC_L,  KC_SCLN, KC_QUOT, 
-   KC_LSFT,     KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LEFT, KC_DOWN,   KC_RGHT,   KC_N,    KC_M,    KC_COMM,  KC_DOT,  KC_SLSH, KC_RSFT, \
+   KC_LSFT,     KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LEFT, KC_DOWN,   KC_RGHT,   KC_N,    KC_M,    KC_COMM,  KC_DOT,  KC_SLSH, KC_RSFT, 
-  KC_GRAVE, KC_GRAVE, KC_LALT, KC_LCTL,   LOWER,  KC_SPC,    KC_LGUI,  KC_DEL,    KC_ENT, KC_SPC,   RAISE,    XXXXXXX, XXXXXXX,  XXXXXXX, KC_PSCR  \
+  KC_GRAVE,  KC_BSLS, KC_LALT, KC_LCTL,   LOWER,  KC_SPC,    KC_LGUI,  KC_DEL,    KC_ENT, KC_SPC,   RAISE,    KC_LEFT,  KC_DOWN,   KC_UP, KC_RGHT  
 ),
 
 
@@ -51,12 +49,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |        |        |        |        | LOWER  |        |  APP   |        |        |        |  RAISE |        |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
-[_LOWER] = LAYOUT_ortho_5x15( \
+[_LOWER] = LAYOUT_ortho_5x15( 
-    XXXXXXX,   KC_F1,   KC_F2,   KC_F3, XXXXXXX,   KC_F5, XXXXXXX, XXXXXXX, XXXXXXX,    KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10, XXXXXXX,  \
+    XXXXXXX,   KC_F1,   KC_F2,   KC_F3, XXXXXXX,   KC_F5, XXXXXXX, XXXXXXX, XXXXXXX,    KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10, XXXXXXX,  
-    XXXXXXX, XXXXXXX,   KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  \
+    XXXXXXX, XXXXXXX,   KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  
-      RAISE, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      RAISE, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   LOWER, XXXXXXX,  KC_APP, XXXXXXX, XXXXXXX,  XXXXXXX,   RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  \
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   LOWER, XXXXXXX,  KC_APP, XXXXXXX, XXXXXXX,  XXXXXXX,   RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  
 ),
 
  /* RAISE
@@ -72,12 +70,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |        |        |        |        | LOWER  |        |        |        |        |        |  RAISE |        |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
-[_RAISE] = LAYOUT_ortho_5x15( \
+[_RAISE] = LAYOUT_ortho_5x15( 
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  \
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  
-    XXXXXXX, XXXXXXX,   KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  \
+    XXXXXXX, XXXXXXX,   KC_UP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  
-      RAISE, KC_HOME, KC_PGDN,  KC_END, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+      RAISE, KC_HOME, KC_PGDN,  KC_END, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   LOWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,   RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  \
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   LOWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,   RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  
 ),
 
 
@@ -94,12 +92,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |        |        |        |        | LOWER  |        |        |        |        |        |  RAISE |        |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
-[_ADJUST] = LAYOUT_ortho_5x15( \
+[_ADJUST] = LAYOUT_ortho_5x15( 
-    RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  RGB_M_P, RGB_M_T, RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX,  \
+    RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  RGB_M_P, RGB_M_T, RGB_MOD, XXXXXXX, XXXXXXX, XXXXXXX,  
-  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_TOG, BL_TOGG, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_TOG, BL_TOGG, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  
-    RAISE, XXXXXXX, RGB_HUI, RGB_SAI, RGB_VAI,  BL_INC, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+    RAISE, XXXXXXX, RGB_HUI, RGB_SAI, RGB_VAI,  BL_INC, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-  EEP_RST, XXXXXXX, RGB_HUD, RGB_SAD, RGB_VAD,  BL_DEC, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
+  EEP_RST, XXXXXXX, RGB_HUD, RGB_SAD, RGB_VAD,  BL_DEC, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
-  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   LOWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,   RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   LOWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  XXXXXXX,   RAISE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  
 ),
 
 
@@ -116,7 +114,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         update_tri_layer(_LOWER, _RAISE, _ADJUST);
       }
       return false;
-      break;
     case RAISE:
       if (record->event.pressed) {
         layer_on(_RAISE);
@@ -126,15 +123,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
         update_tri_layer(_LOWER, _RAISE, _ADJUST);
       }
       return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
   }
   return true;
 }

keyboards/idobo/keymaps/greenshadowmaker/readme.md

@@ -1,3 +1,5 @@
 # GreenShadowMaker keymap for idobo
 
+make idobo:greenshadowmaker:dfu
+
 Note: keyboard-layout-editor-gsm-idobo.json shoudl be the matching layout for http://www.keyboard-layout-editor.com

keyboards/jc65/v32u4/keymaps/gam3cat/keymap.c

@@ -12,10 +12,10 @@ enum layers {
 };
 
 enum custom_keycodes {
-    DYNAMIC_MACRO_RANGE = SAFE_RANGE,
+    QMK_REV = SAFE_RANGE,
-    QMK_REV,
     KC_WEB,
-    KC_SP4
+    KC_SP4,
+    DYNAMIC_MACRO_RANGE
 };
 
 extern backlight_config_t backlight_config;
@@ -251,7 +251,7 @@ uint32_t layer_state_set_user(uint32_t state) {
            break;
        case _AL:
            custom_backlight_level(3);
-           rgblight_sethsv_noeeprom(350,255,255);
+           rgblight_sethsv_noeeprom(250,255,255);
            break;
        default:
            custom_backlight_level(0);

keyboards/jc65/v32u4/keymaps/gam3cat/rules.mk

@@ -22,4 +22,3 @@ FAUXCLICKY_ENABLE = no      # Uses buzzer to emulate clicky switches.  By defaul
 API_SYSEX_ENABLE = no       # This enables using the Quantum SYSEX API to send strings(+5390)
 KEY_LOCK_ENABLE = no        # This enables key lock(+260)
 SPLIT_KEYBOARD = no         # This enables split keyboard support and includes all necessary files located at quantum/split_common
-

keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c

@@ -56,20 +56,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
      * │   │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│PSc│Ins│
      * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
-     * │     │Hom│ ↑ │End│PgU│   │   │   │   │M1 │M↑ │M3 │M2 │ Del │
+     * │     │Hom│ ↑ │End│PgU│   │   │   │   │M3 │M1 │M↑ │M2 │ Del │
      * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
-     * │      │ ← │ ↓ │ → │PgD│   │   │   │MW↑│M← │M↓ │M→ │        │
+     * │      │ ← │ ↓ │ → │PgD│   │   │   │   │MW↑│M← │M→ │        │
      * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
-     * │        │Mut│Vo-│Vo+│Ply│Prv│Nxt│MW←│MW→│M4 │M5 │      │   │
+     * │        │Mut│Vo-│Vo+│Ply│Prv│Nxt│App│MW←│MW→│M↓ │      │   │
      * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
      *       │   │     │            MW↓            │MAcl2│   │
      *       └───┴─────┴───────────────────────────┴─────┴───┘
      */
     [L_FN] = LAYOUT(
         _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,
-        _______, KC_HOME, KC_UP,   KC_END,  KC_PGUP, _______, _______, _______, _______, KC_BTN1, KC_MS_U, KC_BTN3, KC_BTN2, KC_DEL,
+        _______, KC_HOME, KC_UP,   KC_END,  KC_PGUP, _______, _______, _______, _______, KC_BTN3, KC_BTN1, KC_MS_U, KC_BTN2, KC_DEL,
-        _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, _______,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, _______, KC_WH_U, KC_MS_L, KC_MS_R, _______,
-        _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_WH_L, KC_WH_R, KC_BTN4, KC_BTN5, _______, _______,
+        _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_APP,  KC_WH_L, KC_WH_R, KC_MS_D, _______, _______,
         XXXXXXX, _______, _______,                   KC_WH_D,                   KC_ACL2, _______, XXXXXXX
     ),
 
@@ -81,7 +81,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
      * │      │Mv←│Mv↓│Mv→│TNx│   │   │   │   │   │   │   │        │
      * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
-     * │        │RTg│RV-│RV+│   │   │   │   │   │   │   │      │   │
+     * │        │RTg│RV-│RV+│   │   │   │   │M4 │M5 │   │      │   │
      * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
      *       │DPR│DstNA│                           │     │   │
      *       └───┴─────┴───────────────────────────┴─────┴───┘
@@ -90,7 +90,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLEAR,
         _______, TOP,     MV_UP,   BOTTOM,  TAB_PRV, _______, _______, _______, _______, _______, _______, _______, _______, DEL_NXT,
         _______, MV_LEFT, MV_DOWN, MV_RGHT, TAB_NXT, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, RGB_TOG, RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, RGB_TOG, RGB_VAD, RGB_VAI, _______, _______, _______, _______, KC_BTN4, KC_BTN5, _______, _______, _______,
         XXXXXXX, DST_P_R, DST_N_A,                   _______,                   _______, _______, XXXXXXX
     ),
 };

keyboards/keebio/iris/keymaps/jasonkrasavage/config.h

@@ -0,0 +1,25 @@
+/*
+Copyright 2017 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// #define USE_I2C
+#define EE_HANDS
+
+#undef RGBLED_NUM
+
+#define RGBLED_NUM 12

keyboards/keebio/iris/keymaps/jasonkrasavage/keymap.c

@@ -0,0 +1,44 @@
+#include QMK_KEYBOARD_H
+
+
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST
+};
+
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_GESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                               KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                               KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+ KC_CAPSLOCK, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                               KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LBRACKET,  KC_RBRACKET,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+                                    KC_LALT, KC_LGUI,   KC_ENT,              MO(_LOWER),  KC_SPC,   KC_RALT
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+
+  [_LOWER] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     _______, _______, _______, _______, _______, _______,                            _______, _______, _______, _______, _______, _______,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     _______, _______, _______, _______, _______, _______,                            _______, _______, KC_UP, _______, _______, _______,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     _______, _______, _______, _______, _______, KC_LCBR,                            KC_RCBR, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______, _______, _______, _______, _______, KC_LPRN, _______,          _______, KC_RPRN, _______, _______, _______, _______, _______,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+                                    _______, _______, _______,                   _______, _______, _______
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  )
+};
+

keyboards/keebio/iris/keymaps/jasonkrasavage/rules.mk

@@ -0,0 +1 @@
+RGBLIGHT_ENABLE = yes

keyboards/keebio/iris/keymaps/mattly/config.h

@@ -0,0 +1,28 @@
+/*
+Copyright 2017 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// #define USE_I2C
+#define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8

keyboards/keebio/iris/keymaps/mattly/keymap.c

@@ -0,0 +1,50 @@
+#include QMK_KEYBOARD_H
+#include "mattly.h"
+
+// extern keymap_config_t keymap_config;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                               KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                               KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_SCLN,
+    KC_CAPS, A_CTRL,  S_ALT,   D_GUI,   F_SHFT,  KC_G,                               KC_H,    J_SHFT,  K_GUI,   L_ALT,   MINSCTL, KC_QUOT,
+    XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    SPC_SFT,         BSP_NUM,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+                                   ESC_HYP, BSP_NUM, ENT_SFT,                   SPC_SFT, TAB_SYM, DEL_WRP
+  ),
+
+  [_SYMBOL] = LAYOUT(
+    _______, _______, _______, _______, _______, _______,                            _______, _______, _______, _______, _______, _______,
+    _______, KC_AMPR, KC_GRV,  KC_TILD, KC_LBRC, KC_RBRC,                            KC_LABK, KC_RABK, KC_PLUS, KC_ASTR, XXXXXXX, _______,
+    _______, KC_DLR,  KC_PERC, KC_EQL,  KC_LPRN, KC_RPRN,                            KC_SCLN, KC_COLN, KC_EXLM, KC_AT,   KC_UNDS, _______,
+    RESET,   XXXXXXX, KC_CIRC, KC_HASH, KC_LCBR, KC_RCBR, _______,          _______, KC_QUOT, KC_DQUO, KC_PIPE, KC_BSLS, KC_QUES, _______,
+                                  _______, _______, _______,                     _______, _______, _______
+  ),
+
+  [_NAVNUM] = LAYOUT(
+    XNOTIFY, XXXXXXX, XPRVSPC, NWIN,    XNXTSPC, XXXXXXX,                            XXXXXXX, KC_SLSH, KC_ASTR, KC_MINS, KC_PLUS, XXXXXXX,
+    XALLWIN, NAVFWD,  BWORD,   KC_UP,   FWORD,   KC_PGUP,                            KC_DLR,  KC_P7,   KC_P8,   KC_P9,   KC_DOT,  XXXXXXX,
+    XDESKTP, NAVBACK, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN,                            KC_PERC, KC_P4,   KC_P5,   KC_P6,   KC_EQL,  XXXXXXX,
+    RESET,   PTAB,    KC_HOME, PWIN,    KC_END,  NTAB,    _______,          _______, XXXXXXX, KC_P1,   KC_P2,   KC_P3,   KC_ENT,  XXXXXXX,
+                                   _______, _______, _______,                   _______, _______, KC_P0
+  ),
+
+  [_FUNCT] = LAYOUT(
+    KC_F12,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                              KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
+    RESET,   XALLWIN, XPRVSPC, NWIN,    XNXTSPC, XDESKTP,                            XXXXXXX, RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_K, RESET,
+    DEBUG,   XNOTIFY, PTAB,    PWIN,    NTAB,    XXXXXXX,                            XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    KC_MUTE, KC_VOLD, KC_VOLU, KC_MRWD, KC_MFFD, KC_MPLY, _______,          _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+                                   _______, _______, _______,                   _______, _______, _______
+  )
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        if (clockwise) {
+            tap_code(KC_MS_WH_UP);
+        } else {
+            tap_code(KC_MS_WH_DOWN);
+        }
+    }
+}
+

keyboards/keebio/iris/keymaps/mattly/readme.md

@@ -0,0 +1 @@
+See my readme in [users/mattly](../../../../../users/mattly/readme.md)

keyboards/keebio/iris/keymaps/osiris/config.h

@@ -0,0 +1,33 @@
+/*
+Copyright 2019 Khader Syed
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define USE_I2C
+#define EE_HANDS
+
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+// #undef PERMISSIVE_HOLD
+//#define TAPPING_FORCE_HOLD
+//#define RETRO_TAPPING
+#define PERMISSIVE_HOLD

keyboards/keebio/iris/keymaps/osiris/keymap.c

@@ -0,0 +1,116 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST
+};
+
+enum custom_keycodes {
+  LOWER = SAFE_RANGE,
+  RAISE,
+};
+
+#define KC_ KC_TRNS
+
+#define KC_LOWR LOWER
+#define KC_RASE RAISE
+#define KC_RST  RESET
+#define KC_BL_S BL_STEP
+
+// left control as a left key too - makes perfect sense
+#define KC_LECL LCTL_T(KC_LEFT)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     GESC, 1  , 2  , 3  , 4  , 5  ,                6  , 7  , 8  , 9  , 0  ,BSPC,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     TAB , Q  , W  , E  , R  , T  ,                Y  , U  , I  , O  , P  ,BSLS,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+     LCTL, A  , S  , D  , F  , G  ,                H  , J  , K  , L  ,SCLN,QUOT,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+     LSFT, Z  , X  , C  , V  , B  ,LBRC,     RBRC, N  , M  ,COMM,DOT ,SLSH,RSFT,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                       LGUI,LOWR,ENT ,         SPC ,RASE,RALT
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_LOWER] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     TILD,EXLM, AT ,HASH,DLR ,PERC,               CIRC,AMPR,ASTR,LPRN,RPRN,DEL ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,    , UP ,    ,    ,    ,                   ,    ,BTN1,    ,    ,    ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,LEFT,DOWN,RGHT,    ,    ,               MS_L,MS_D,MS_U,MS_R,    ,    ,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,    ,             ,    ,   
+  //                  `----+----+----'        `----+----+----'
+
+),
+  [_RAISE] = LAYOUT_kc(
+  //,----+----+----+----+----+----.              ,----+----+----+----+----+----.
+     F12 , F1 , F2 , F3 , F4 , F5 ,                F6 , F7 , F8 , F9 ,F10 ,F11 ,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,    ,VOLU,    ,    ,LBRC,               RBRC,UNDS,PLUS,    ,    ,MUTE,
+  //|----+----+----+----+----+----|              |----+----+----+----+----+----|
+         ,MPLY,VOLD,MNXT,    ,LPRN,               RPRN,MINS,EQL ,    ,    ,    ,
+  //|----+----+----+----+----+----+----.    ,----|----+----+----+----+----+----|
+         ,    ,    ,    ,    ,    ,    ,         ,    ,    ,    ,    ,    ,    ,
+  //`----+----+----+--+-+----+----+----/    \----+----+----+----+----+----+----'
+                           ,    ,    ,             ,    ,
+  //                  `----+----+----'        `----+----+----'
+  ),
+
+  [_ADJUST] = LAYOUT(
+  //,--------+--------+--------+--------+--------+--------.                          ,--------+--------+--------+--------+--------+--------.
+      _______, _______, _______, _______, _______, _______,                            _______, _______, _______, _______, _______, _______,
+  //|--------+--------+--------+--------+--------+--------|                          |--------+--------+--------+--------+--------+--------|
+      RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, _______,                            _______, _______, _______, _______, _______, _______,
+  //|--------+--------+--------+--------+--------+--------|                          |--------+--------+--------+--------+--------+--------|
+      RESET  , DEBUG  , RGB_HUD, RGB_SAD, RGB_VAD, _______,                            _______, _______, _______, _______, _______, _______,
+  //|--------+--------+--------+--------+--------+--------+--------.        ,--------|--------+--------+--------+--------+--------+--------|
+      BL_STEP, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______, _______, _______,
+  //`--------+--------+--------+----+---+--------+--------+--------/        \--------+--------+--------+---+----+--------+--------+--------'
+                                      _______, _______, _______,                  _______, _______, _______
+  //                                `--------+--------+--------'                `--------+--------+--------'
+  )
+
+};
+
+#ifdef AUDIO_ENABLE
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+#endif
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/keebio/iris/keymaps/osiris/readme.md

@@ -0,0 +1,9 @@
+# My Iris Layout
+
+![My Iris Rev3](https://i.imgur.com/7oXacel.jpg)
+
+- mouse keys enabled
+- WASD as arrow keys, and same ones for media
+- keys that I need, while removing keys that I don't
+
+See keymap.c for layouts

keyboards/keebio/iris/keymaps/osiris/rules.mk

@@ -0,0 +1,3 @@
+RGBLIGHT_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+MOUSEKEY_ENABLE = yes

keyboards/m10a/keymaps/gam3cat/keymap.c

@@ -17,10 +17,10 @@ enum layers {
 };
 
 enum custom_keycodes {
-    DYNAMIC_MACRO_RANGE = SAFE_RANGE,
+    QMK_REV = SAFE_RANGE,
-    QMK_REV,
     KC_WEB,
-    KC_WCLS
+    KC_WCLS,
+    DYNAMIC_MACRO_RANGE
 };
 
 extern backlight_config_t backlight_config;

keyboards/m10a/keymaps/gam3cat/rules.mk

@@ -22,4 +22,3 @@ FAUXCLICKY_ENABLE = no      # Uses buzzer to emulate clicky switches.  By defaul
 API_SYSEX_ENABLE = no       # This enables using the Quantum SYSEX API to send strings(+5390)
 KEY_LOCK_ENABLE = no        # This enables key lock(+260)
 SPLIT_KEYBOARD = no         # This enables split keyboard support and includes all necessary files located at quantum/split_common
-

keyboards/mechllama/g35/config.h

@@ -0,0 +1,39 @@
+/*
+Copyright 2019 Kaylyn Bogle
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID       0xCEEB
+#define PRODUCT_ID      0x0035
+#define MANUFACTURER    kaylynb
+#define PRODUCT         MechLlama G35
+#define DESCRIPTION     35 key macropad
+
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 7
+
+#define DIODE_DIRECTION COL2ROW
+
+#define QMK_ESC_OUTPUT D6
+#define QMK_ESC_INPUT F5
+#define QMK_SPEAKER D2
+
+#define RGB_DI_PIN F7
+
+#define FORCE_NKRO

keyboards/mechllama/g35/g35.c

@@ -0,0 +1,16 @@
+/* Copyright 2019 Kaylyn Bogle
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "g35.h"

keyboards/mechllama/g35/g35.h

@@ -0,0 +1,33 @@
+/* Copyright 2019 Kaylyn Bogle
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, \
+    K10, K11, K12, K13, K14, K15, K16, \
+    K20, K21, K22, K23, K24, K25, K26, \
+    K30, K31, K32, K33, K34, K35, K36, \
+    K40, K41, K42, K43, K44, K45, K46  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, }, \
+    { K10, K11, K12, K13, K14, K15, K16, }, \
+    { K20, K21, K22, K23, K24, K25, K26, }, \
+    { K30, K31, K32, K33, K34, K35, K36, }, \
+    { K40, K41, K42, K43, K44, K45, K46  } \
+}

keyboards/mechllama/g35/info.json

@@ -0,0 +1,14 @@
+{
+    "keyboard_name": "G35",
+    "url": "https://github.com/kaylynb/MechLlama-G35",
+    "maintainer": "kaylynb",
+    "width": 7,
+    "height": 5.75,
+    "key_count": 35,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"F1", "x":0, "y":0.5}, {"label":"Esc", "x":1, "y":0.5}, {"label":"1", "x":2, "y":0}, {"label":"2", "x":3, "y":0.15}, {"label":"3", "x":4, "y":0}, {"label":"4", "x":5, "y":0}, {"label":"5", "x":6, "y":0}, {"label":"F2", "x":0, "y":1.5}, {"label":"Tab", "x":1, "y":1.5}, {"label":"Q", "x":2, "y":1}, {"label":"W", "x":3, "y":1.15}, {"label":"E", "x":4, "y":1}, {"label":"R", "x":5, "y":1}, {"label":"T", "x":6, "y":1}, {"label":"F3", "x":0, "y":2.5}, {"label":"Shift", "x":1, "y":2.5}, {"label":"A", "x":2, "y":2}, {"label":"S", "x":3, "y":2.15}, {"label":"D", "x":4, "y":2}, {"label":"F", "x":5, "y":2}, {"label":"G", "x":6, "y":2}, {"label":"F4", "x":0, "y":3.5}, {"label":"Ctrl", "x":1, "y":3.5}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3.15}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"F5", "x":0, "y":4.5}, {"label":"Super", "x":1, "y":4.5}, {"label":"Alt", "x":2, "y":4, "h":1.5}, {"label":"Bksp", "x":3, "y":4.25, "h":1.25}, {"label":"Enter", "x":4, "y":4, "h":1.5}, {"label":"Space", "x":5, "y":4, "h":1.75}, {"label":"Fn", "x":6, "y":4, "h":1.75}]
+        }
+    }
+}
+rt

keyboards/mechllama/g35/keymaps/default/keymap.c

@@ -0,0 +1,72 @@
+/* Copyright 2019 Kaylyn Bogle
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _BASE = 0,
+    _ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT(
+    //┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+        KC_F1,   KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,
+    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+        KC_F2,   KC_TAB,   KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,
+    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+        KC_F3,  KC_LSFT,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,
+    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+        KC_F4,  KC_LCTL,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,
+    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+    //
+    MO(_ADJUST),KC_LGUI, KC_LALT, KC_BSPC,  KC_ENT,  KC_SPC, KC_MINUS
+    //└────────┴────────┴────────┴────────┴────────┴────────┴────────┘
+    ),
+    [_ADJUST] = LAYOUT(
+    //┌────────┬────────┬────────┬────────┬────────┬────────┬────────┐
+       RGB_TOG,TO(_BASE),XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,  RESET,
+    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+       RGB_M_K, XXXXXXX, RGB_RMOD,RGB_HUI, RGB_MOD, XXXXXXX, XXXXXXX,
+    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+       XXXXXXX, XXXXXXX, RGB_SAD, RGB_HUD, RGB_SAI, XXXXXXX, XXXXXXX,
+    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼
+       XXXXXXX, XXXXXXX, RGB_VAD, XXXXXXX, RGB_VAI, XXXXXXX, XXXXXXX,
+    //├────────┼────────┼────────┼────────┼────────┼────────┼────────┼
+    //
+       _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
+    //└────────┴────────┴────────┴────────┴────────┴────────┴────────┘
+    ),
+};
+
+#if defined(OLED_DRIVER_ENABLE)
+const char* get_layer_name(uint8_t layer) {
+    switch (layer) {
+        case _BASE:
+            return PSTR("Default");
+            break;
+        case _ADJUST:
+            return PSTR("Adjust");
+            break;
+        default:
+            return PSTR("Unknown");
+            break;
+    }
+}
+
+void oled_task_user(void) {
+    oled_write_ln_P(get_layer_name(biton32(layer_state)), false);
+}
+#endif

keyboards/mechllama/g35/keymaps/default/readme.md

@@ -0,0 +1,4 @@
+![G35 Layout Image](https://i.imgur.com/fDlRAN9.png)
+# Default G35 Layout
+
+This is the default layout for the G35.

keyboards/mechllama/g35/readme.md

@@ -0,0 +1,15 @@
+# MechLlama G35
+
+![Photo](https://i.imgur.com/EvIA4t0.jpg)  
+
+A 35 key left-handed columnar layout macropad.
+
+Keyboard Maintainer: [Kaylyn Bogle](https://github.com/kaylynb/)  
+Hardware Supported: G35 v1 & v2  
+Hardware Availability: [KiCad and Gerbers](https://github.com/kaylynb/MechLlama-G35)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mechllama/g35/v2:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/mechllama/g35/rules.mk

@@ -0,0 +1,14 @@
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+BOOTLOADER = atmel-dfu
+
+NKRO_ENABLE = yes
+OLED_DRIVER_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+
+DEFAULT_FOLDER = mechllama/g35/v2

keyboards/mechllama/g35/v1/config.h

@@ -0,0 +1,25 @@
+/*
+Copyright 2019 Kaylyn Bogle
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define DEVICE_VER      0x0001
+
+#define MATRIX_ROW_PINS { F5, F6, F4, F1, D4 }
+#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, F0, D5 }
+
+#define RGBLED_NUM 41

keyboards/mechllama/g35/v2/config.h

@@ -0,0 +1,25 @@
+/*
+Copyright 2019 Kaylyn Bogle
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define DEVICE_VER      0x0002
+
+#define MATRIX_ROW_PINS { F5, F4, F1, F0, D4 }
+#define MATRIX_COL_PINS { D6, D7, B4, B5, B6, F6, D5 }
+
+#define RGBLED_NUM 6

keyboards/melody96/keymaps/konstantin/keymap.c

@@ -38,18 +38,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┼───┼───┤P+ │
      * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │P4 │P5 │P6 │   │
      * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┼───┼───┼───┤
-     * │LSft│RAG│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │P1 │P2 │P3 │   │
+     * │LSft│RAG│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RSfRCt│ ↑ │P1 │P2 │P3 │   │
-     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬┴──┬───┼───┼───┼───┼───┤PEn│
+     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴──┬───┼───┼───┼───┼───┤PEn│
-     * │LCtl│LGui│LAlt│         Space          │RAG│FnL│RCt│ ← │ ↓ │ → │P0 │P. │   │
+     * │LCtl│LGui│LAlt│         Space          │RAlGu│FnLk │ ← │ ↓ │ → │P0 │P. │   │
-     * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┴───┴───┴───┴───┘
+     * └────┴────┴────┴────────────────────────┴─────┴─────┴───┴───┴───┴───┴───┴───┘
      */
     [L_BASE] = LAYOUT(
         KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,  KC_HOME, KC_END,  KC_PGUP, KC_PGDN,
         KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_DEL,  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_P7,   KC_P8,   KC_P9,   XXXXXXX,
         FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
-        KC_LSFT, RAL_RGU, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_P1,   KC_P2,   KC_P3,   XXXXXXX,
+        KC_LSFT, RAL_RGU, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RSF_RCT,          KC_UP,   KC_P1,   KC_P2,   KC_P3,   XXXXXXX,
-        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             RAL_RGU, FN_FNLK, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             RAL_RGU, XXXXXXX, FN_FNLK, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT
     ),
 
     /* Function layer
@@ -62,9 +62,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┼───┼───┤RSt│
      * │      │M← │M↓ │M→ │MW↑│   │   │   │   │   │   │   │        │RH-│RS-│RV-│   │
      * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┼───┼───┼───┤
-     * │    │   │MA0│MA2│MW←│MW→│   │   │   │Vo-│Vo+│Mut│      │PgU│RMR│RMS│RMB│   │
+     * │    │   │MA0│MA2│MW←│MW→│   │   │App│Vo-│Vo+│Mut│      │PgU│RMR│RMS│RMB│   │
      * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬┴──┬───┼───┼───┼───┼───┤RMP│
-     * │    │DtPR│DtNA│          MW↓           │   │   │App│Hom│PgD│End│RM-│RM+│   │
+     * │    │DtPR│DtNA│          MW↓           │   │   │   │Hom│PgD│End│RM-│RM+│   │
      * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┴───┴───┴───┴───┘
      */
     [L_FN] = LAYOUT(
@@ -72,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, RGB_TOG, DIVIDE,  TIMES,   MINUS,
         KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD,  _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, CLEAR,            RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX,
         _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______,                   RGB_HUD, RGB_SAD, RGB_VAD, RGB_SET,
-        _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______,          KC_PGUP, RGB_M_R, RGB_M_SN,RGB_M_B, XXXXXXX,
+        _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP,  KC_VOLD, KC_VOLU, KC_MUTE, _______,          KC_PGUP, RGB_M_R, RGB_M_SN,RGB_M_B, XXXXXXX,
-        _______, DST_P_R, DST_N_A,                            KC_WH_D,                            _______, _______, KC_APP,  KC_HOME, KC_PGDN, KC_END,  RGB_RMOD,RGB_MOD, RGB_M_P
+        _______, DST_P_R, DST_N_A,                            KC_WH_D,                            _______, XXXXXXX, _______, KC_HOME, KC_PGDN, KC_END,  RGB_RMOD,RGB_MOD, RGB_M_P
     ),
 };

keyboards/model01/rules.mk

@@ -1,5 +1,5 @@
-SRC += i2c_master.c \
+QUANTUM_LIB_SRC += i2c_master.c
-	   leds.c \
+SRC += leds.c \
 	   matrix.c
 
 # MCU name

keyboards/noxary/268_2/268_2.c

@@ -15,40 +15,14 @@
  */
 #include "268_2.h"
 
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
 void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-
+        setPinOutput(B0);
-	led_set_user(usb_led);
+        writePinHigh(B0);
-}
+    } else {
-
+        setPinInput(B0);
-__attribute__((weak))
+        writePinLow(B0);
-void led_set_user(uint8_t usb_led) {
-
-    if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-        DDRB |= (1 << 0); PORTB |= (1 << 0);
-    }
-    else {
-        DDRB &= ~(1 << 0); PORTB &= ~(1 << 0);
     }
+
+    led_set_user(usb_led);
 }

keyboards/noxary/268_2/268_2.h

@@ -13,8 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef N268_2_H
+#pragma once
-#define N268_2_H
 
 #include "quantum.h"
 
@@ -27,17 +26,57 @@
  * represents the switch matrix.
  */
 #define LAYOUT( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, K015, \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K214, K215, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K214, K215, \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K314, K315, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K314, K315, \
-	K400, K401, K402,                   K406,             K409, K410,       K412,       K414, K415  \
+    K400, K401, K402,                   K406,                   K409, K410,       K412, K414, K415  \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015, }, \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  KC_NO, K014,  K015 }, \
-	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115, }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115 }, \
-	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, KC_NO, K214,  K215, }, \
+    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, KC_NO, K214,  K215 }, \
-	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, K314,  K315, }, \
+    { K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, K314,  K315 }, \
-	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, K409,  K410,  KC_NO, K412,  KC_NO, K414,  K415, }  \
+    { K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, K409,  K410,  KC_NO, K412,  KC_NO, K414,  K415 }  \
 }
 
-#endif
+#define LAYOUT_split_bs( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K214, K215, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K314, K315, \
+    K400, K401, K402,                   K406,                   K409, K410,       K412, K414, K415  \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115 }, \
+    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, KC_NO, K214,  K215 }, \
+    { K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, K314,  K315 }, \
+    { K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, K409,  K410,  KC_NO, K412,  KC_NO, K414,  K415 }  \
+}
+
+#define LAYOUT_7u_space( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, K015, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K214, K215, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K314, K315, \
+    K400, K401, K402,                   K406,                         K410,       K412, K414, K415  \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  KC_NO, K014,  K015 }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115 }, \
+    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, KC_NO, K214,  K215 }, \
+    { K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, K314,  K315 }, \
+    { K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  KC_NO, K412,  KC_NO, K414,  K415 }  \
+}
+
+#define LAYOUT_7u_space_split_bs( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K114, K115, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K214, K215, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K314, K315, \
+    K400, K401, K402,                   K406,                         K410,       K412, K414, K415  \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO, K114,  K115 }, \
+    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, KC_NO, K214,  K215 }, \
+    { K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, K314,  K315 }, \
+    { K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  KC_NO, K412,  KC_NO, K414,  K415 }  \
+}

keyboards/noxary/268_2/config.h

@@ -41,7 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  *
 */
-/* key matrix pins */
 #define MATRIX_ROW_PINS { F7, F6, F5, F0, B5 }
 #define MATRIX_COL_PINS { C6, B6, C7, F4, E6, D0, D7, D1, D2, B4, D6, D4, D5, F1, D3, B1 }
 #define UNUSED_PINS
@@ -49,11 +48,42 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* number of backlight levels */
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
 #define BACKLIGHT_PIN B7
-#ifdef BACKLIGHT_PIN
+//define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
-#endif
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
@@ -106,6 +136,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -115,8 +149,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP           H
-//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_HELP_ALT       SLASH
 //#define MAGIC_KEY_DEBUG          D
 //#define MAGIC_KEY_DEBUG_MATRIX   X
 //#define MAGIC_KEY_DEBUG_KBD      K
@@ -124,9 +158,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MAGIC_KEY_VERSION        V
 //#define MAGIC_KEY_STATUS         S
 //#define MAGIC_KEY_CONSOLE        C
-//#define MAGIC_KEY_LAYER0_ALT1    ESC
-//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
 //#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
 //#define MAGIC_KEY_LAYER1         1
 //#define MAGIC_KEY_LAYER2         2
 //#define MAGIC_KEY_LAYER3         3
@@ -136,9 +169,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MAGIC_KEY_LAYER7         7
 //#define MAGIC_KEY_LAYER8         8
 //#define MAGIC_KEY_LAYER9         9
-//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
 //#define MAGIC_KEY_LOCK           CAPS
 //#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
 //#define MAGIC_KEY_NKRO           N
 //#define MAGIC_KEY_SLEEP_LED      Z
 

keyboards/noxary/268_2/info.json

@@ -5,8 +5,289 @@
   "width": 16,
   "height": 5,
   "layouts": {
-      "LAYOUT": {
+    "LAYOUT": {
-          "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+      "layout": [
-      }
+        {"x":0, "y":0},
+        {"x":1, "y":0},
+        {"x":2, "y":0},
+        {"x":3, "y":0},
+        {"x":4, "y":0},
+        {"x":5, "y":0},
+        {"x":6, "y":0},
+        {"x":7, "y":0},
+        {"x":8, "y":0},
+        {"x":9, "y":0},
+        {"x":10, "y":0},
+        {"x":11, "y":0},
+        {"x":12, "y":0},
+        {"x":13, "y":0, "w":2},
+        {"x":15, "y":0},
+        {"x":0, "y":1, "w":1.5},
+        {"x":1.5, "y":1},
+        {"x":2.5, "y":1},
+        {"x":3.5, "y":1},
+        {"x":4.5, "y":1},
+        {"x":5.5, "y":1},
+        {"x":6.5, "y":1},
+        {"x":7.5, "y":1},
+        {"x":8.5, "y":1},
+        {"x":9.5, "y":1},
+        {"x":10.5, "y":1},
+        {"x":11.5, "y":1},
+        {"x":12.5, "y":1},
+        {"x":13.5, "y":1, "w":1.5},
+        {"x":15, "y":1},
+        {"x":0, "y":2, "w":1.75},
+        {"x":1.75, "y":2},
+        {"x":2.75, "y":2},
+        {"x":3.75, "y":2},
+        {"x":4.75, "y":2},
+        {"x":5.75, "y":2},
+        {"x":6.75, "y":2},
+        {"x":7.75, "y":2},
+        {"x":8.75, "y":2},
+        {"x":9.75, "y":2},
+        {"x":10.75, "y":2},
+        {"x":11.75, "y":2},
+        {"x":12.75, "y":2, "w":2.25},
+        {"x":15, "y":2},
+        {"x":0, "y":3, "w":2.25},
+        {"x":2.25, "y":3},
+        {"x":3.25, "y":3},
+        {"x":4.25, "y":3},
+        {"x":5.25, "y":3},
+        {"x":6.25, "y":3},
+        {"x":7.25, "y":3},
+        {"x":8.25, "y":3},
+        {"x":9.25, "y":3},
+        {"x":10.25, "y":3},
+        {"x":11.25, "y":3},
+        {"x":12.25, "y":3, "w":1.75},
+        {"x":14, "y":3},
+        {"x":15, "y":3},
+        {"x":0, "y":4, "w":1.25},
+        {"x":1.25, "y":4, "w":1.25},
+        {"x":2.5, "y":4, "w":1.25},
+        {"x":3.75, "y":4, "w":6.25},
+        {"x":10, "y":4, "w":1.25},
+        {"x":11.25, "y":4, "w":1.25},
+        {"x":13, "y":4},
+        {"x":14, "y":4},
+        {"x":15, "y":4}
+      ]
+    },
+    "LAYOUT_split_bs": {
+      "layout": [
+        {"x":0, "y":0},
+        {"x":1, "y":0},
+        {"x":2, "y":0},
+        {"x":3, "y":0},
+        {"x":4, "y":0},
+        {"x":5, "y":0},
+        {"x":6, "y":0},
+        {"x":7, "y":0},
+        {"x":8, "y":0},
+        {"x":9, "y":0},
+        {"x":10, "y":0},
+        {"x":11, "y":0},
+        {"x":12, "y":0},
+        {"x":13, "y":0},
+        {"x":14, "y":0},
+        {"x":15, "y":0},
+        {"x":0, "y":1, "w":1.5},
+        {"x":1.5, "y":1},
+        {"x":2.5, "y":1},
+        {"x":3.5, "y":1},
+        {"x":4.5, "y":1},
+        {"x":5.5, "y":1},
+        {"x":6.5, "y":1},
+        {"x":7.5, "y":1},
+        {"x":8.5, "y":1},
+        {"x":9.5, "y":1},
+        {"x":10.5, "y":1},
+        {"x":11.5, "y":1},
+        {"x":12.5, "y":1},
+        {"x":13.5, "y":1, "w":1.5},
+        {"x":15, "y":1},
+        {"x":0, "y":2, "w":1.75},
+        {"x":1.75, "y":2},
+        {"x":2.75, "y":2},
+        {"x":3.75, "y":2},
+        {"x":4.75, "y":2},
+        {"x":5.75, "y":2},
+        {"x":6.75, "y":2},
+        {"x":7.75, "y":2},
+        {"x":8.75, "y":2},
+        {"x":9.75, "y":2},
+        {"x":10.75, "y":2},
+        {"x":11.75, "y":2},
+        {"x":12.75, "y":2, "w":2.25},
+        {"x":15, "y":2},
+        {"x":0, "y":3, "w":2.25},
+        {"x":2.25, "y":3},
+        {"x":3.25, "y":3},
+        {"x":4.25, "y":3},
+        {"x":5.25, "y":3},
+        {"x":6.25, "y":3},
+        {"x":7.25, "y":3},
+        {"x":8.25, "y":3},
+        {"x":9.25, "y":3},
+        {"x":10.25, "y":3},
+        {"x":11.25, "y":3},
+        {"x":12.25, "y":3, "w":1.75},
+        {"x":14, "y":3},
+        {"x":15, "y":3},
+        {"x":0, "y":4, "w":1.25},
+        {"x":1.25, "y":4, "w":1.25},
+        {"x":2.5, "y":4, "w":1.25},
+        {"x":3.75, "y":4, "w":6.25},
+        {"x":10, "y":4, "w":1.25},
+        {"x":11.25, "y":4, "w":1.25},
+        {"x":13, "y":4},
+        {"x":14, "y":4},
+        {"x":15, "y":4}
+      ]
+    },
+    "LAYOUT_7u_space": {
+      "layout": [
+        {"x":0, "y":0},
+        {"x":1, "y":0},
+        {"x":2, "y":0},
+        {"x":3, "y":0},
+        {"x":4, "y":0},
+        {"x":5, "y":0},
+        {"x":6, "y":0},
+        {"x":7, "y":0},
+        {"x":8, "y":0},
+        {"x":9, "y":0},
+        {"x":10, "y":0},
+        {"x":11, "y":0},
+        {"x":12, "y":0},
+        {"x":13, "y":0, "w":2},
+        {"x":15, "y":0},
+        {"x":0, "y":1, "w":1.5},
+        {"x":1.5, "y":1},
+        {"x":2.5, "y":1},
+        {"x":3.5, "y":1},
+        {"x":4.5, "y":1},
+        {"x":5.5, "y":1},
+        {"x":6.5, "y":1},
+        {"x":7.5, "y":1},
+        {"x":8.5, "y":1},
+        {"x":9.5, "y":1},
+        {"x":10.5, "y":1},
+        {"x":11.5, "y":1},
+        {"x":12.5, "y":1},
+        {"x":13.5, "y":1, "w":1.5},
+        {"x":15, "y":1},
+        {"x":0, "y":2, "w":1.75},
+        {"x":1.75, "y":2},
+        {"x":2.75, "y":2},
+        {"x":3.75, "y":2},
+        {"x":4.75, "y":2},
+        {"x":5.75, "y":2},
+        {"x":6.75, "y":2},
+        {"x":7.75, "y":2},
+        {"x":8.75, "y":2},
+        {"x":9.75, "y":2},
+        {"x":10.75, "y":2},
+        {"x":11.75, "y":2},
+        {"x":12.75, "y":2, "w":2.25},
+        {"x":15, "y":2},
+        {"x":0, "y":3, "w":2.25},
+        {"x":2.25, "y":3},
+        {"x":3.25, "y":3},
+        {"x":4.25, "y":3},
+        {"x":5.25, "y":3},
+        {"x":6.25, "y":3},
+        {"x":7.25, "y":3},
+        {"x":8.25, "y":3},
+        {"x":9.25, "y":3},
+        {"x":10.25, "y":3},
+        {"x":11.25, "y":3},
+        {"x":12.25, "y":3, "w":1.75},
+        {"x":14, "y":3},
+        {"x":15, "y":3},
+        {"x":0, "y":4, "w":1.5},
+        {"x":1.5, "y":4},
+        {"x":2.5, "y":4, "w":1.5},
+        {"x":4, "y":4, "w":7},
+        {"x":11, "y":4, "w":1.5},
+        {"x":13, "y":4},
+        {"x":14, "y":4},
+        {"x":15, "y":4}
+      ]
+    },
+    "LAYOUT_7u_space_split_bs": {
+      "layout": [
+        {"x":0, "y":0},
+        {"x":1, "y":0},
+        {"x":2, "y":0},
+        {"x":3, "y":0},
+        {"x":4, "y":0},
+        {"x":5, "y":0},
+        {"x":6, "y":0},
+        {"x":7, "y":0},
+        {"x":8, "y":0},
+        {"x":9, "y":0},
+        {"x":10, "y":0},
+        {"x":11, "y":0},
+        {"x":12, "y":0},
+        {"x":13, "y":0},
+        {"x":14, "y":0},
+        {"x":15, "y":0},
+        {"x":0, "y":1, "w":1.5},
+        {"x":1.5, "y":1},
+        {"x":2.5, "y":1},
+        {"x":3.5, "y":1},
+        {"x":4.5, "y":1},
+        {"x":5.5, "y":1},
+        {"x":6.5, "y":1},
+        {"x":7.5, "y":1},
+        {"x":8.5, "y":1},
+        {"x":9.5, "y":1},
+        {"x":10.5, "y":1},
+        {"x":11.5, "y":1},
+        {"x":12.5, "y":1},
+        {"x":13.5, "y":1, "w":1.5},
+        {"x":15, "y":1},
+        {"x":0, "y":2, "w":1.75},
+        {"x":1.75, "y":2},
+        {"x":2.75, "y":2},
+        {"x":3.75, "y":2},
+        {"x":4.75, "y":2},
+        {"x":5.75, "y":2},
+        {"x":6.75, "y":2},
+        {"x":7.75, "y":2},
+        {"x":8.75, "y":2},
+        {"x":9.75, "y":2},
+        {"x":10.75, "y":2},
+        {"x":11.75, "y":2},
+        {"x":12.75, "y":2, "w":2.25},
+        {"x":15, "y":2},
+        {"x":0, "y":3, "w":2.25},
+        {"x":2.25, "y":3},
+        {"x":3.25, "y":3},
+        {"x":4.25, "y":3},
+        {"x":5.25, "y":3},
+        {"x":6.25, "y":3},
+        {"x":7.25, "y":3},
+        {"x":8.25, "y":3},
+        {"x":9.25, "y":3},
+        {"x":10.25, "y":3},
+        {"x":11.25, "y":3},
+        {"x":12.25, "y":3, "w":1.75},
+        {"x":14, "y":3},
+        {"x":15, "y":3},
+        {"x":0, "y":4, "w":1.5},
+        {"x":1.5, "y":4},
+        {"x":2.5, "y":4, "w":1.5},
+        {"x":4, "y":4, "w":7},
+        {"x":11, "y":4, "w":1.5},
+        {"x":13, "y":4},
+        {"x":14, "y":4},
+        {"x":15, "y":4}
+      ]
+    }
   }
 }

keyboards/noxary/268_2/keymaps/default/keymap.c

@@ -4,80 +4,51 @@
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
 // entirely and just use numbers.
-#define _BL 0
+enum layer_names {
-#define _FL1 1
+    _BL,
-#define _FL2 2
+    _FL
+};
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    /* _BL: Base Layer(Default) - For ISO enter use ANSI enter
+    /* Base Layer
-    * ,----------------------------------------------------------------.
+    * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
-    * |Esc | 1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =| \|BSpc| Grv|
+    * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │  Bspc │ ` │
-    * |----------------------------------------------------------------|
+    * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
-    * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | Del|
+    * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │Del│
-    * |----------------------------------------------------------------|
+    * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
-    * |CAPS   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '| #| Ent|PgUp|
+    * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │  Enter │PgU│
-    * |----------------------------------------------------------------|
+    * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-    * |Shift| \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift | Up|PgDn|
+    * │ Shift  │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │Shift │ ↑ │PgD│
-    * |----------------------------------------------------------------|
+    * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
-    * |Ctrl|Win |Alt |        Space        |Alt|Mo(1)|Ctrl|Lef|Dow|Rght|
+    * │Ctrl│Win │Alt │        Space           │Alt │ Fn │ │ ← │ ↓ │ → │
-    * `----------------------------------------------------------------'
+    * └────┴────┴────┴────────────────────────┴────┴────┴─┴───┴───┴───┘
     */
     [_BL] = LAYOUT(
-        KC_ESC,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,   KC_BSLS, KC_BSPC, KC_GRV,
+        KC_ESC,  KC_1,    KC_2,    KC_3,   KC_4,    KC_5,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,            KC_BSPC, KC_GRV,
         KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,    KC_T,  KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,           KC_BSLS, KC_DEL,
         KC_CAPS, KC_A,    KC_S,    KC_D,   KC_F,    KC_G,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                    KC_ENT,  KC_PGUP,
         KC_LSFT,          KC_Z,    KC_X,   KC_C,    KC_V,  KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,           KC_UP,   KC_PGDN,
-        KC_LCTL, KC_LGUI, KC_LALT,                         KC_SPC,                    KC_RALT, MO(_FL1),         KC_LEFT,           KC_DOWN, KC_RGHT),
+        KC_LCTL, KC_LGUI, KC_LALT,                         KC_SPC,                             KC_RALT, MO(_FL),           KC_LEFT, KC_DOWN, KC_RGHT
-    /* _FL1: Function Layer 1 - For ISO enter use ANSI enter
+    ),
-    * ,----------------------------------------------------------------.
+
-    * |  `|F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|   |PScr|    |
+    /* Function Layer
-    * |----------------------------------------------------------------|
+    * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐
-    * |     |   |   |   |RST|   |   |   |   |   |   |   |   |     | Ins|
+    * │ ` │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│  PScr │   │
-    * |----------------------------------------------------------------|
+    * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤
-    * |       |   |   |   |   |   |   |   |   |   |   |   |  |    |Home|
+    * │     │   │   │   │RST│   │   │   │   │   │   │   │   │     │Ins│
-    * |----------------------------------------------------------------|
+    * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
-    * |     |   |   |   |   |   |   |   |   |Bl-|Bl+|   |Mute|Vol+| End|
+    * │      │   │   │   │   │   │   │   │   │   │   │   │        │Hom│
-    * |----------------------------------------------------------------|
+    * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-    * |    |    |    |      BL_Toggle       |   |   |   |    |Vol-|    |
+    * │        │   │   │   │   │   │   │   │   │Bl-│Bl+│ Mute │Vl+│End│
-    * `----------------------------------------------------------------'
+    * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
+    * │    │    │    │      BL Toggle         │    │    │ │   │Vl-│   │
+    * └────┴────┴────┴────────────────────────┴────┴────┴─┴───┴───┴───┘
     */
-    [_FL1] = LAYOUT(
+    [_FL] = LAYOUT(
-        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, KC_PSCR, _______,
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_PSCR, _______,
         _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_INS,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, KC_HOME,
-        _______,          _______, _______, _______, _______, _______, _______, _______, BL_DEC,  BL_INC,  _______, KC_MUTE,          KC_VOLU, KC_END,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, BL_DEC,  BL_INC,  KC_MUTE,          KC_VOLU, KC_END,
-        _______, _______, _______,                            BL_TOGG,                   _______, _______,          _______,          KC_VOLD, _______),
+        _______, _______, _______,                            BL_TOGG,                            _______, _______,          _______, KC_VOLD, _______
-    /* _FL2: Function Layer 2 - For ISO enter use ANSI enter
+    )
-    * ,----------------------------------------------------------------.
-    * |   |  |   |   |   |   |   |   |   |   |   |   |   |    |   |    |
-    * |----------------------------------------------------------------|
-    * |     |   |   |   |   |   |   |   |   |   |   |   |   |     |    |
-    * |----------------------------------------------------------------|
-    * |       |   |   |   |   |   |   |   |   |   |   |   |  |    |    |
-    * |----------------------------------------------------------------|
-    * |     |   |   |   |   |   |   |   |   |   |   |   |    |    |    |
-    * |----------------------------------------------------------------|
-    * |    |    |    |                      |   |   |   |    |    |    |
-    * `----------------------------------------------------------------'
-    */
-    [_FL2] = LAYOUT(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
-        _______, _______, _______,                            _______,                   _______, _______,          _______,          _______, _______),
-
 };
-
-
-void matrix_init_user(void) {
-}
-
-void matrix_scan_user(void) {
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-    return true;
-}
-
-

keyboards/noxary/268_2/readme.md

@@ -4,10 +4,9 @@
 
 A fully customizable 65% keyboard.
 
-* Keyboard Maintainer: [Rozakiin](https://github.com/rozakiin)
+Keyboard Maintainer: [Rozakiin](https://github.com/rozakiin)  
-* Hardware Supported: 268.2 PCB
+Hardware Supported: 268.2 PCB  
-  * rev1 
+Hardware Availability: [Noxary](https://shop.noxary.co/collections/268-2/products/noxary-268-2-polycarbonate)
-* Hardware Availability: [Noxary](https://shop.noxary.co/collections/268-2/products/noxary-268-2-polycarbonate)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/noxary/268_2/rules.mk

@@ -48,16 +48,6 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 BOOTLOADER = atmel-dfu
 
 
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-#   Teensy halfKay      512
-#   Teensy++ halfKay    1024
-#   Atmel DFU loader    4096
-#   LUFA bootloader     4096
-#   USBaspLoader        2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/omnikeyish/keymaps/default_101/keymap.c

@@ -0,0 +1,14 @@
+#include QMK_KEYBOARD_H
+
+#define M_PROG DYN_MACRO_PROG
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    LAYOUT_101(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,      KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,     KC_INS,  KC_HOME, KC_PGUP,     M_PROG,  KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,     KC_DEL,  KC_END,  KC_PGDN,     KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,                                     KC_P4,   KC_P5,   KC_P6,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,              KC_UP,                KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_LCTL,          KC_LALT,                            KC_SPC,                                      KC_RALT,          KC_RCTL,     KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,            KC_PDOT
+    )
+};

keyboards/omnikeyish/omnikeyish.h

@@ -29,15 +29,15 @@ enum keycodes {
 }
 
 /* Northgate Factory Plates. Most are based on internet research, user beware. */ 
-#define LAYOUT_101 ( \
+#define LAYOUT_101( \
 					K103,       K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116,   K117, K118, K119, \
 					K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216,   K217, K218, K219,   K220, K221, K222, K223, \
-					K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316    K317, K318, K319,   K320, K321, K322, K323, \
+					K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316,   K317, K318, K319,   K320, K321, K322, K323, \
 					K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414,    K416,                          K420, K421, K422,       \
 					K503,       K505, K506, K507, K508, K509, K510, K511, K512, K513, K514,    K515,            K518,         K520, K521, K522, K523, \
 					K603,       K605,                               K610,       K613,             K616,   K617, K618, K619,   K620,       K622  \
 ) { \
- 	{ ____, ____,   K103, ____  K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116,   K117, K118, K119,   ____, ____, ____, ____ }, \
+	{ ____, ____,   K103, ____, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116,   K117, K118, K119,   ____, ____, ____, ____ }, \
 	{ ____, ____,   K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216,   K217, K218, K219,   K220, K221, K222, K223 }, \
 	{ ____, ____,   K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316,   K317, K318, K319,   K320, K321, K322, K323 }, \
 	{ ____, ____,   K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, ____, K416,   ____, ____, ____,   K420, K421, K422, ____ }, \

keyboards/planck/keymaps/mattly/keymap.c

@@ -1,166 +1,34 @@
-/* Copyright 2015-2017 Jack Humbert
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
 #include QMK_KEYBOARD_H
-#include "muse.h"
+#include "mattly.h"
-
-extern keymap_config_t keymap_config;
-
-enum planck_layers {
-  _QWERTY,
-  _NUMBER,
-  _SYMBOL,
-  _FUNC,
-};
-
-enum planck_keycodes {
-  QWERTY = SAFE_RANGE
-};
-
-#define SPC_SHF MT(MOD_LSFT, KC_SPC)
-
-#define ESC_HYP MT(MOD_HYPR, KC_ESC)
-#define TAB_NUM LT(_NUMBER, KC_TAB)
-#define BSP_SYM LT(_SYMBOL, KC_BSPC)
-#define DEL_WRP MT(MOD_LCTL | MOD_LALT | MOD_LGUI, KC_DEL)
-
-#define SYMLOCK TG(_SYMBOL)
-#define NUMLOCK TG(_NUMBER)
-
-#define ONE_CTL OSM(MOD_LCTL)
-#define ONE_ALT OSM(MOD_LALT)
-#define ONE_GUI OSM(MOD_LGUI)
-#define ONE_HYP OSM(MOD_HYPR)
-#define ONE_MEH OSM(MOD_MEH)
-#define ONE_WRP OSM(MOD_LCTL | MOD_LALT | MOD_LGUI)
-#define ONE_WOA OSM(MOD_LCTL | MOD_LGUI | MOD_LSFT)
-#define ONE_DER OSM(MOD_LALT | MOD_LGUI | MOD_LSFT)
-
-#define A_CTRL  MT(MOD_LCTL, KC_A)
-#define S_ALT   MT(MOD_LALT, KC_S)
-#define D_GUI   MT(MOD_LGUI, KC_D)
-#define F_SHFT  MT(MOD_LSFT, KC_F)
-#define J_SHFT  MT(MOD_RSFT, KC_J)
-#define K_GUI   MT(MOD_RGUI, KC_K)
-#define L_ALT   MT(MOD_RALT, KC_L)
-#define MINSCTL MT(MOD_RCTL, KC_MINS)
-
-#define ENT_CTL MT(MOD_LCTL, KC_ENT)
-#define LT_ALT  MT(MOD_LALT, KC_LEFT)
-#define DN_GUI  MT(MOD_LGUI, KC_DOWN)
-#define RT_SHFT MT(MOD_LSFT, KC_RGHT)
-#define N4_SHFT MT(MOD_RSFT, KC_4)
-#define N5_GUI  MT(MOD_RGUI, KC_5)
-#define N6_ALT  MT(MOD_RALT, KC_6)
-
-#define BWORD LALT(KC_LEFT)
-#define FWORD LALT(KC_RIGHT)
-
-#define NWIN LGUI(KC_GRV)
-#define PWIN LGUI(LSFT(KC_GRV))
-#define NTAB LGUI(LSFT(KC_RBRC))
-#define PTAB LGUI(LSFT(KC_LBRC))
-#define NAVBACK LGUI(KC_LBRC)
-#define NAVFWD  LGUI(KC_RBRC)
-
-#define XMSNCTL HYPR(KC_F14)
-#define XDSKTOP HYPR(KC_F15)
-#define XNXTSPC HYPR(KC_F16)
-#define XPRVSPC HYPR(KC_F17)
-#define XNOTIFY HYPR(KC_F18)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-
-/* Querty
-  |   #  |   q  |   w  |   e  |   r  |   t  |   y  |   u  |   i  |   o  |   p  |   -  |
-  |      |      |      |      |      |      |      |      |      |      |      |      |
-  |------|------|------|------|------|------|------|------|------|------|------|------|
-  |   (  |   a  |   s  |   d  |   f  |   g  |   h  |   j  |   k  |   l  |   ;  |   '  |
-  |      | CTRL | ALT  |  GUI | SHIFT|      |      | SHIFT| GUI  | ALT  | CTRL |      |
-  |------|------|------|------|------|------|------|------|------|------|------|------|
-  |   [  |   z  |   x  |   c  |   v  |   b  |   n  |   m  |   ,  |   .  |   /  |   >  |
-  |      |      |      |      |      |      |      |      |      |      |      |      |
-  |------|------|------|------|------|------|------|------|------|------|------|------|
-  | ctrl | alt  |  gui | Esc  | Tab  |   space     | Bksp |  Del | hyper| meh  | warp |
-  |      |      |      | FUNC |NUMBER|   SHIFT     |SYMBOL|      |      |      |      |
- */
  [_QWERTY] = LAYOUT_planck_grid(
-    KC_HASH, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_SCLN,
+    XXXXXXX, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_SCLN,
-    KC_LPRN, A_CTRL,  S_ALT,   D_GUI,   F_SHFT,  KC_G,    KC_H,    J_SHFT,  K_GUI,   L_ALT,   MINSCTL, KC_QUOT,
+    KC_CAPS, A_CTRL,  S_ALT,   D_GUI,   F_SHFT,  KC_G,    KC_H,    J_SHFT,  K_GUI,   L_ALT,   MINSCTL, KC_QUOT,
-    KC_LBRC, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RABK,
+    XXXXXXX, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
-    NUMLOCK, MO(_FUNC), ONE_MEH, ESC_HYP, TAB_NUM, SPC_SHF, SPC_SHF, BSP_SYM, DEL_WRP, ONE_WRP, ONE_DER, SYMLOCK
+    XXXXXXX, NAVLOCK, XXXXXXX, ESC_HYP, BSP_NUM, ENT_SFT, SPC_SFT, TAB_SYM, DEL_WRP, XXXXXXX, SYMLOCK, XXXXXXX
  ),
 
-/* Symbol
-  |      |   &  |   `  |   ~  |   [  |   ]  |   <  |   >  |   +  |   |  |      |      |
-  |      |   $  |   %  |   =  |   (  |   )  |   ;  |   :  |   !  |   @  |   _  |      |
-  |      |      |   ^  |   #  |   {  |   }  |   '  |   "  |   |  |   \  |   ?  |      |
-  |      |      |      |      |      |             | .... |      |      |      |      |
- */
  [_SYMBOL] = LAYOUT_planck_grid(
-     KC_ESC,  KC_AMPR, KC_GRV,  KC_TILD, KC_LBRC, KC_RBRC, KC_LABK, KC_RABK, KC_PLUS, KC_ASTR, XXXXXXX, KC_DEL,
+     _______, KC_AMPR, KC_GRV,  KC_TILD, KC_LBRC, KC_RBRC, KC_LABK, KC_RABK, KC_PLUS, KC_ASTR, XXXXXXX, _______,
-     KC_ENT,  KC_DLR,  KC_PERC, KC_EQL,  KC_LPRN, KC_RPRN, KC_SCLN, KC_COLN, KC_EXLM, KC_AT,   KC_UNDS, KC_BSPC,
+     _______, KC_DLR,  KC_PERC, KC_EQL,  KC_LPRN, KC_RPRN, KC_SCLN, KC_COLN, KC_EXLM, KC_AT,   KC_UNDS, _______,
      _______, XXXXXXX, KC_CIRC, KC_HASH, KC_LCBR, KC_RCBR, KC_QUOT, KC_DQUO, KC_PIPE, KC_BSLS, KC_QUES, _______,
      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
  ),
-/* Number
+
-  |      |      |<-word|  up  |word->| PgUp |   .  |   7  |   8  |   9  |   +  |   *  |
+[_NAVNUM] = LAYOUT_planck_grid(
-  |      | Enter| left | down | right| PgDn |   0  |   4  |   5  |   6  |   -  |   /  |
+    _______, XXXXXXX, BWORD,   KC_UP,   FWORD,   KC_PGUP, KC_DOT,  KC_7,    KC_8,    KC_9,    KC_PLUS, KC_ASTR,
-  |      | Bksp | Home |  tab | End  | Del  |   ,  |   1  |   2  |   3  |   =  |   %  |
+    _______, KC_ENT,  KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_0,    KC_4,    KC_5,    KC_6,    KC_MINS, KC_SLSH,
-  |      |      |      |      | .... |             |      |      |   :  |   $  |      |
+    _______, KC_BSPC, KC_HOME, KC_TAB,  KC_END,  KC_DEL,  KC_COMM, KC_1,    KC_2,    KC_3,    KC_EQL,  KC_PERC,
- */
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_0,    KC_COLN, KC_DLR,  _______
-[_NUMBER] = LAYOUT_planck_grid(
-    XXXXXXX, XXXXXXX, BWORD,   KC_UP,   FWORD,   KC_PGUP, KC_DOT,  KC_7,    KC_8,    KC_9,    KC_PLUS, KC_ASTR,
-    KC_CAPS, ENT_CTL, LT_ALT,  DN_GUI,  RT_SHFT, KC_PGDN, KC_0,    N4_SHFT, N5_GUI,  N6_ALT,  MINSCTL, KC_SLSH,
-    XXXXXXX, KC_BSPC, KC_HOME, KC_TAB,  KC_END,  KC_DEL,  KC_COMM, KC_1,    KC_2,    KC_3,    KC_EQL,  KC_PERC,
-    _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_COLN, KC_DLR,  _______
 ),
-/* Function
+
- * | Reset| Mctl | Pspc | Nwin | Nspc | Desk |      |  F7  |  F8  |  F9  | F10  | F13  |
+[_FUNCT] = LAYOUT_planck_grid(
- * | Debug| Nctr | Ptab | Pwin | Ntab | Back | Fwd  |  F4  |  F5  |  F6  | F11  | F14  |
+    RESET,   XALLWIN, XPRVSPC, NWIN,    XNXTSPC, XDESKTP, XXXXXXX, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F13,
- * | Mute | Vol- | Vol+ | Trk- | Trk+ | Play |      |  F1  |  F2  |  F3  | F12  | F15  |
- * |      |      |      |      |      |      |      |      |      |      |      |      |
- */
-[_FUNC] = LAYOUT_planck_grid(
-    RESET,   XMSNCTL, XPRVSPC, NWIN,    XNXTSPC, XDSKTOP, XXXXXXX, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F13,
     DEBUG,   XNOTIFY, PTAB,    PWIN,    NTAB,    NAVBACK, NAVFWD,  KC_F4,   KC_F5,   KC_F6,   KC_F11,  KC_F14,
     KC_MUTE, KC_VOLD, KC_VOLU, KC_MRWD, KC_MFFD, KC_MPLY, XXXXXXX, KC_F1,   KC_F2,   KC_F3,   KC_F12,  KC_F15,
     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
 )
 };
 
-#ifdef AUDIO_ENABLE
-#endif
-
-uint32_t layer_state_set_user(uint32_t state) {
-  state = update_tri_layer_state(state, _SYMBOL, _NUMBER, _FUNC);
-  return state;
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QWERTY:
-      if (record->event.pressed) {
-        print("mode just switched to qwerty and this is a huge string\n");
-        set_single_persistent_default_layer(_QWERTY);
-      }
-      return false;
-      break;
-  }
-  return true;
-}
-
 

keyboards/planck/keymaps/mattly/readme.md

@@ -1,28 +1 @@
-# Mattly's Planck layout
+See my readme in [users/mattly](../../../../../users/mattly/readme.md)
-
-This planck layout is optimized for, in order:
-
-- moving work from my pinkies to my thumbs
-- writing lisp/clojure code in my evil-mode based emacs setup
-- tapping out messages in chat applications such as slack
-- writing english in markdown files in said emacs
-- navigating mac applications
-- writing english in a web browser on a macintosh
-- writing other programming languages' code in said emacs
-- writing english in other contexts
-- literally anything else
-
-## oddities:
-
-You may notice that `enter` is on a layer. This is an experiment and I kind of
-like it so far, since many programs interpret that keystroke as a "commit"
-of some kind.
-
-## works in progress
-
-I'm trying to figure out how to make some things easier to do with the mouse or
-one-handed. Right now the combo of entering numbers and using a mouse with my
-right hand is kind of annoying. I want to be able to toggle layers on, but only
-from within that layer.
-
-![mattly's keymap](https://lyonheart.us/etc/mattly-keymap.png)

keyboards/thevankeyboards/minivan/minivan.h

@@ -42,7 +42,7 @@
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
-    K30, K31, K34, K32,      K33, K37,           K38, K39, K3B  \
+    K30, K31, K32, K34,      K33, K37,           K38, K39, K3B  \
 ) \
 { \
     { K00,   K01,   K02,   K03,  K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B }, \
@@ -55,7 +55,7 @@
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
     K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
     K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
-    K30, K31, K34, K32,      K33, K37,      K38, K39, K3A, K3B  \
+    K30, K31, K32, K34,      K33, K37,      K38, K39, K3A, K3B  \
 ) \
 { \
     { K00,   K01,   K02,   K03,  K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B }, \

keyboards/unikorn/config.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2017 Luiz Ribeiro <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+#define VENDOR_ID       0x20A0
+#define PRODUCT_ID      0x422D
+#define MANUFACTURER    Singa and TGR
+#define PRODUCT         Unikorn 60
+
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+//                        0   1   2   3   4   5   6   7   8   9   A   B   C   D   E
+#define MATRIX_ROW_PINS { B1, B2, B3, B4, B5 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW
+#define DEBOUNCE 5
+
+#define NO_BACKLIGHT_CLOCK
+#define BACKLIGHT_LEVELS 1
+#ifdef RGBLIGHT_ENABLE
+#define RGBLED_NUM 17
+#define RGBLIGHT_ANIMATIONS
+#endif

keyboards/unikorn/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "Unikorn 60", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":1.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_60_ansi": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
+        }
+    }
+}

keyboards/unikorn/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 amnesia0287
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/unikorn/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [0] = LAYOUT_60_ansi(
+    KC_GRV,  KC_Q,    KC_2,    KC_3,  KC_4,  KC_5,  KC_6,   KC_7,  KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,  KC_R,  KC_T,  KC_Y,   KC_U,  KC_I,    KC_O,   KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,  KC_F,  KC_G,  KC_H,   KC_J,  KC_K,    KC_L,   KC_SCLN, KC_QUOT,          KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,  KC_V,  KC_B,  KC_N,   KC_M,  KC_COMM, KC_DOT, KC_SLSH,          KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT,                      KC_SPC,                         KC_RALT, KC_RGUI, MO(1),   KC_RCTL
+  ),
+
+  [1] = LAYOUT_60_ansi(
+    KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+    RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+  )
+};

keyboards/unikorn/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for singa

keyboards/unikorn/readme.md

@@ -0,0 +1,57 @@
+# Unikorn 60
+
+60% PCB made for the TGR x SINGA Unikorn60. 
+
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Unikorn 60 PCB  
+Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=98350.0)
+
+
+Make example for this keyboard (after setting up your build environment):
+
+    make unikorn:default
+
+This PCB can support RGB underglow. There are pads on the bottom of the PCB for the LED controller chip and for 17 RGB underglow LEDs. The Unikorn 60 case does not have acrylic pieces to properly display underglow effects. 
+
+To enable RGB lighting support, install the necessary components and set RGBLIGHT features in `rules.mk` like so:
+
+```
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+```
+
+
+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+**Reset Key:** Short the two holes labeled `FW_JP` beside the Tab key. At this time there is no reset key to press.   
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python3
+    pip3 install pyusb
+    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/unikorn/rules.mk

@@ -0,0 +1,48 @@
+# Copyright 2017 Luiz Ribeiro <[email protected]>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# processor frequency
+F_CPU = 12000000
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
+# build options
+BOOTMAGIC_ENABLE = no
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = yes
+COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = no
+RGBLIGHT_CUSTOM_DRIVER = no
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+SRC = i2c_master.c
+
+# programming options
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/unikorn/unikorn.c

@@ -0,0 +1,89 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "i2c_master.h"
+#include "quantum.h"
+
+#ifdef RGBLIGHT_ENABLE
+#include "rgblight.h"
+extern rgblight_config_t rgblight_config;
+
+void rgblight_set(void) {
+    if (!rgblight_config.enable) {
+        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+            led[i].r = 0;
+            led[i].g = 0;
+            led[i].b = 0;
+        }
+    }
+
+    i2c_init();
+    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+}
+#endif
+
+void matrix_init_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+    if (rgblight_config.enable) {
+        i2c_init();
+        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+    }
+#endif
+    // call user level keymaps, if any
+    matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+    rgblight_task();
+#endif
+    matrix_scan_user();
+    /* Nothing else for now. */
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void backlight_init_ports(void) {
+    // initialize pins D0, D1, D4 and D6 as output
+    setPinOutput(D0);
+    setPinOutput(D1);
+    setPinOutput(D4);
+    setPinOutput(D6);
+
+    // turn backlight LEDs on
+    writePinHigh(D0);
+    writePinHigh(D1);
+    writePinHigh(D4);
+    writePinHigh(D6);
+}
+
+void backlight_set(uint8_t level) {
+	if (level == 0) {
+        // turn backlight LEDs off
+        writePinLow(D0);
+        writePinLow(D1);
+        writePinLow(D4);
+        writePinLow(D6);
+	} else {
+        // turn backlight LEDs on
+        writePinHigh(D0);
+        writePinHigh(D1);
+        writePinHigh(D4);
+        writePinHigh(D6);
+	}
+}

keyboards/unikorn/unikorn.h

@@ -0,0 +1,52 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+
+#define LAYOUT_all( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,      \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,      \
+  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D,      \
+  k40, k41, k42, k44, k45, k47, k48, k49, k4B, k4D                           \
+){ \
+  { k00, k01, k02, k03,   k04, k05, k06,   k07, k08, k09, k0A,   k0B, k0C,   k0D, k0E   }, \
+  { k10, k11, k12, k13,   k14, k15, k16,   k17, k18, k19, k1A,   k1B, k1C,   k1D, KC_NO }, \
+  { k20, k21, k22, k23,   k24, k25, k26,   k27, k28, k29, k2A,   k2B, k2C,   k2D, KC_NO }, \
+  { k30, k31, k32, k33,   k34, k35, k36,   k37, k38, k39, k3A,   k3B, k3C,   k3D, KC_NO }, \
+  { k40, k41, k42, KC_NO, k44, k45, KC_NO, k47, k48, k49, KC_NO, k4B, KC_NO, k4D, KC_NO }, \
+}
+
+
+#define LAYOUT_60_ansi( \
+  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
+  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \
+  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D,      \
+  k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C,           \
+  k40, k41, k42, k45, k48, k49, k4B, k4D                                \
+){ \
+  { k00,   k01,   k02,   k03,   k04,   k05,   k06,   k07,   k08,   k09,   k0A,   k0B,   k0C,   k0D,   KC_NO  }, \
+  { k10,   k11,   k12,   k13,   k14,   k15,   k16,   k17,   k18,   k19,   k1A,   k1B,   k1C,   k1D,   KC_NO  }, \
+  { k20,   k21,   k22,   k23,   k24,   k25,   k26,   k27,   k28,   k29,   k2A,   k2B,   KC_NO, k2D,   KC_NO  }, \
+  { k30,   KC_NO, k32,   k33,   k34,   k35,   k36,   k37,   k38,   k39,   k3A,   k3B,   k3C,   KC_NO, KC_NO  }, \
+  { k40,   k41,   k42,   KC_NO, KC_NO, k45,   KC_NO, KC_NO, k48,   k49,   KC_NO, k4B,   KC_NO, k4D,   KC_NO  }, \
+}
+

keyboards/unikorn/usbconfig.h

@@ -0,0 +1,393 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#pragma once
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER           500
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     's', 'i', 'n', 'g', 'a', 't', 'g', 'r'
+#define USB_CFG_VENDOR_NAME_LEN 8
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'u', 'n', 'i', 'k', 'o', 'r', 'n'
+#define USB_CFG_DEVICE_NAME_LEN 7
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT     INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT    INTF1
+#define USB_INTR_VECTOR         INT1_vect

keyboards/wasdat/keymaps/konstantin/config.h

@@ -0,0 +1,4 @@
+#pragma once
+
+#define LAYER_FN
+#define LAYER_NUMPAD

keyboards/wasdat/keymaps/konstantin/keymap.c

@@ -0,0 +1,79 @@
+#include QMK_KEYBOARD_H
+#include "konstantin.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* Base layer
+     * ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐
+     * │Esc│   │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12││PSc│SLk│Pau│
+     * └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐
+     * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace ││Ins│Hom│PgU│
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤
+     * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │     ││Del│End│PgD│
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐Ent │└───┴───┴───┘
+     * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ \ │    │
+     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤    ┌───┐
+     * │LSft│RAG│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │  RShift  │    │ ↑ │
+     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐
+     * │LCtl│LGui│LAlt│         Space          │RAlt│RGui│FnLk│RCtl││ ← │ ↓ │ → │
+     * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
+     */
+    [L_BASE] = LAYOUT_tkl_iso(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_DEL,  KC_END,  KC_PGDN,
+        FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+        KC_LSFT, RAL_RGU, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,          KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, FN_FNLK, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    /* Function layer
+     * ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐
+     * │   │   │   │   │   │   │ │   │   │   │   │ │   │   │   │   ││   │Num│   │
+     * └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐
+     * │   │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│ Clear ││   │   │   │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤
+     * │ M4  │M2 │M↑ │M1 │M3 │M5 │   │UCM│   │Stp│Ply│Prv│Nxt│     ││   │   │   │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │└───┴───┴───┘
+     * │      │M← │M↓ │M→ │MW↑│   │   │   │   │   │   │   │   │    │
+     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤    ┌───┐
+     * │    │   │MA0│MA2│MW←│MW→│   │   │App│Vo-│Vo+│Mut│          │    │PgU│
+     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐
+     * │    │DtPR│DtNA│          MW↓           │    │    │    │    ││Hom│PgD│End│
+     * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
+     */
+    [L_FN] = LAYOUT_tkl_iso(
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD,  _______,
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  CLEAR,   _______, _______, _______,
+        KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD,  _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT,          _______, _______, _______,
+        _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP,  KC_VOLD, KC_VOLU, KC_MUTE,          _______,          KC_PGUP,
+        _______, DST_P_R, DST_N_A,                            KC_WH_D,                            _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END
+    ),
+
+    /* Numpad layer
+     * ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐
+     * │   │   │   │   │   │   │ │   │   │   │   │ │   │   │   │   ││   │Num│   │
+     * └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘
+     * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐┌───┬───┬───┐
+     * │   │   │   │   │   │   │   │P7 │P8 │P9 │P- │ − │ = │       ││   │   │   │
+     * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤├───┼───┼───┤
+     * │     │   │   │   │   │   │   │P4 │P5 │P6 │P+ │ ( │ ) │     ││   │   │   │
+     * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐PEnt│└───┴───┴───┘
+     * │      │   │   │   │   │   │   │P1 │P2 │P3 │P* │ × │   │    │
+     * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤    ┌───┐
+     * │    │   │   │   │   │   │   │P0 │P0 │ , │P. │P/ │    ÷     │    │   │
+     * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤┌───┼───┼───┐
+     * │    │    │    │                        │    │    │    │    ││   │   │   │
+     * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘
+     */
+    [L_NUMPAD] = LAYOUT_tkl_iso(
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, NUMPAD,  _______,
+        _______, _______, _______, _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   KC_PMNS, MINUS,   EQUALS,  _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, KC_P4,   KC_P5,   KC_P6,   KC_PPLS, L_PAREN, R_PAREN,          _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, KC_P1,   KC_P2,   KC_P3,   KC_PAST, TIMES,   _______, KC_PENT,
+        _______, _______, _______, _______, _______, _______, _______, KC_P0,   KC_P0,   COMMA,   KC_PDOT, KC_PSLS,          DIVIDE,           _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______, _______
+    ),
+};

keyboards/wasdat/keymaps/konstantin/rules.mk

@@ -0,0 +1,8 @@
+BOOTMAGIC_ENABLE  = no
+COMMAND_ENABLE    = yes
+CONSOLE_ENABLE    = yes
+EXTRAKEY_ENABLE   = yes
+MOUSEKEY_ENABLE   = yes
+NKRO_ENABLE       = yes
+TAP_DANCE_ENABLE  = yes
+UNICODEMAP_ENABLE = yes

keyboards/wasdat/matrix.c

@@ -183,7 +183,7 @@ static void unselect_row(uint8_t row)
 static void unselect_rows(void)
 {
     for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
-        setPinInput(row_pins[x]);
+        setPinInputHigh(row_pins[x]);
     }
 }
 
@@ -480,5 +480,5 @@ uint8_t matrix_scan(void)
   debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
 
   matrix_scan_quantum();
-  return 1;
+  return (uint8_t)changed;
 }

keyboards/whitefox/keymaps/konstantin/keymap.c

@@ -10,7 +10,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
      * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
      * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-     * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RCtRSf│ ↑ │PgD│
+     * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RSfRCt│ ↑ │PgD│
      * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
      * │LCtl│LGui│LAlt│         Space          │RAlG│FnLk│ │ ← │ ↓ │ → │
      * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
@@ -19,7 +19,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,  KC_PSCR,
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          KC_DEL,
         FN_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           KC_PGUP,
-        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RCT_RSF,          KC_UP,   KC_PGDN,
+        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RSF_RCT,          KC_UP,   KC_PGDN,
         KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    RAL_RGU, FN_FNLK,                   KC_LEFT, KC_DOWN, KC_RGHT
     ),
 
@@ -31,7 +31,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
      * │      │M← │M↓ │M→ │MW↑│   │   │   │   │   │   │   │        │Top│
      * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-     * │        │MA0│MA2│MW←│MW→│   │   │   │Vo-│Vo+│Mut│ App  │PgU│Btm│
+     * │        │MA0│MA2│MW←│MW→│   │   │App│Vo-│Vo+│Mut│      │PgU│Btm│
      * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
      * │    │DtPR│DtNA│          MW↓           │    │    │ │Hom│PgD│End│
      * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
@@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  NUMPAD,  KC_SLCK, KC_PAUS,
         KC_BTN4, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, KC_BTN5, _______, UC_MOD,  _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, CLEAR,            KC_INS,
         _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, _______, _______, _______, _______, _______, _______,          _______,          TOP,
-        _______,          KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_APP,           KC_PGUP, BOTTOM,
+        _______,          KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP,  KC_VOLD, KC_VOLU, KC_MUTE, _______,          KC_PGUP, BOTTOM,
         _______, DST_P_R, DST_N_A,                            KC_WH_D,                   _______, _______,                   KC_HOME, KC_PGDN, KC_END
     ),
 

quantum/debounce/eager_pk.c

@@ -39,6 +39,7 @@ No further inputs are accepted until DEBOUNCE milliseconds have occurred.
 
 static debounce_counter_t *debounce_counters;
 static bool                counters_need_update;
+static bool                matrix_need_update;
 
 #define DEBOUNCE_ELAPSED 251
 #define MAX_DEBOUNCE (DEBOUNCE_ELAPSED - 1)
@@ -63,7 +64,7 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool
     update_debounce_counters(num_rows, current_time);
   }
 
-  if (changed) {
+  if (changed || matrix_need_update) {
     transfer_matrix_values(raw, cooked, num_rows, current_time);
   }
 }
@@ -88,16 +89,21 @@ void update_debounce_counters(uint8_t num_rows, uint8_t current_time) {
 
 // upload from raw_matrix to final matrix;
 void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) {
+  matrix_need_update = false;
   debounce_counter_t *debounce_pointer = debounce_counters;
   for (uint8_t row = 0; row < num_rows; row++) {
     matrix_row_t delta        = raw[row] ^ cooked[row];
     matrix_row_t existing_row = cooked[row];
     for (uint8_t col = 0; col < MATRIX_COLS; col++) {
       matrix_row_t col_mask = (ROW_SHIFTER << col);
-      if ((delta & col_mask) && *debounce_pointer == DEBOUNCE_ELAPSED) {
+      if (delta & col_mask) {
-        *debounce_pointer    = current_time;
+        if (*debounce_pointer == DEBOUNCE_ELAPSED) {
-        counters_need_update = true;
+          *debounce_pointer    = current_time;
-        existing_row ^= col_mask;  // flip the bit.
+          counters_need_update = true;
+          existing_row ^= col_mask;  // flip the bit.
+        } else {
+          matrix_need_update = true;
+        }
       }
       debounce_pointer++;
     }

quantum/debounce/eager_pr.c

@@ -28,6 +28,7 @@ No further inputs are accepted until DEBOUNCE milliseconds have occurred.
 #endif
 
 #define debounce_counter_t uint8_t
+static bool                matrix_need_update;
 
 static debounce_counter_t *debounce_counters;
 static bool                counters_need_update;
@@ -53,7 +54,7 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool
     update_debounce_counters(num_rows, current_time);
   }
 
-  if (changed || (needed_update && !counters_need_update)) {
+  if (changed || (needed_update && !counters_need_update) || matrix_need_update) {
     transfer_matrix_values(raw, cooked, num_rows, current_time);
   }
 }
@@ -76,18 +77,22 @@ void update_debounce_counters(uint8_t num_rows, uint8_t current_time) {
 
 // upload from raw_matrix to final matrix;
 void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time) {
+  matrix_need_update = false;
   debounce_counter_t *debounce_pointer = debounce_counters;
   for (uint8_t row = 0; row < num_rows; row++) {
     matrix_row_t existing_row = cooked[row];
     matrix_row_t raw_row      = raw[row];
 
     // determine new value basd on debounce pointer + raw value
-    if (*debounce_pointer == DEBOUNCE_ELAPSED && (existing_row != raw_row)) {
+    if (existing_row != raw_row) {
-      *debounce_pointer    = current_time;
+      if (*debounce_pointer == DEBOUNCE_ELAPSED) {
-      cooked[row]          = raw_row;
+        *debounce_pointer    = current_time;
-      counters_need_update = true;
+        cooked[row]          = raw_row;
+        counters_need_update = true;
+      } else {
+        matrix_need_update = true;
+      }
     }
-
     debounce_pointer++;
   }
 }

quantum/process_keycode/process_space_cadet.c

@@ -81,11 +81,17 @@
 
 static uint8_t sc_last = 0;
 static uint16_t sc_timer = 0;
+#ifdef SPACE_CADET_MODIFIER_CARRYOVER
+static uint8_t sc_mods = 0;
+#endif
 
 void perform_space_cadet(keyrecord_t *record, uint8_t holdMod, uint8_t tapMod, uint8_t keycode) {
   if (record->event.pressed) {
     sc_last = holdMod;
     sc_timer = timer_read ();
+#ifdef SPACE_CADET_MODIFIER_CARRYOVER
+    sc_mods = get_mods();
+#endif
     if (IS_MOD(holdMod)) {
       register_mods(MOD_BIT(holdMod));
     }
@@ -100,7 +106,13 @@ void perform_space_cadet(keyrecord_t *record, uint8_t holdMod, uint8_t tapMod, u
           register_mods(MOD_BIT(tapMod));
         }
       }
+#ifdef SPACE_CADET_MODIFIER_CARRYOVER
+    set_weak_mods(sc_mods);
+#endif
       tap_code(keycode);
+#ifdef SPACE_CADET_MODIFIER_CARRYOVER
+    clear_weak_mods();
+#endif
       if (IS_MOD(tapMod)) {
         unregister_mods(MOD_BIT(tapMod));
       }

quantum/quantum.h

@@ -13,8 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef QUANTUM_H
+#pragma once
-#define QUANTUM_H
 
 #if defined(__AVR__)
     #include <avr/pgmspace.h>
@@ -24,9 +23,11 @@
 #if defined(PROTOCOL_CHIBIOS)
     #include "hal.h"
 #endif
+
 #include "wait.h"
 #include "matrix.h"
 #include "keymap.h"
+
 #ifdef BACKLIGHT_ENABLE
     #ifdef LED_MATRIX_ENABLE
         #include "ledmatrix.h"
@@ -34,14 +35,13 @@
         #include "backlight.h"
     #endif
 #endif
-#ifdef RGBLIGHT_ENABLE
+
-  #include "rgblight.h"
+#if defined(RGBLIGHT_ENABLE)
-#else
+    #include "rgblight.h"
-    #ifdef RGB_MATRIX_ENABLE
+#elif defined(RGB_MATRIX_ENABLE)
-        /* dummy define RGBLIGHT_MODE_xxxx */
+    // Dummy define RGBLIGHT_MODE_xxxx
-        #define RGBLIGHT_H_DUMMY_DEFINE
+    #define RGBLIGHT_H_DUMMY_DEFINE
-        #include "rgblight.h"
+    #include "rgblight.h"
-    #endif
 #endif
 
 #ifdef RGB_MATRIX_ENABLE
@@ -50,16 +50,16 @@
 
 #include "action_layer.h"
 #include "eeconfig.h"
-#include <stddef.h>
 #include "bootloader.h"
 #include "timer.h"
 #include "config_common.h"
 #include "led.h"
 #include "action_util.h"
-#include <stdlib.h>
 #include "print.h"
 #include "send_string_keycodes.h"
 #include "suspend.h"
+#include <stddef.h>
+#include <stdlib.h>
 
 extern layer_state_t default_layer_state;
 
@@ -67,18 +67,16 @@ extern layer_state_t default_layer_state;
     extern layer_state_t layer_state;
 #endif
 
-#ifdef MIDI_ENABLE
+#if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED)
-#ifdef MIDI_ADVANCED
     #include "process_midi.h"
 #endif
-#endif // MIDI_ENABLE
 
 #ifdef AUDIO_ENABLE
     #include "audio.h"
     #include "process_audio.h"
     #ifdef AUDIO_CLICKY
         #include "process_clicky.h"
-    #endif // AUDIO_CLICKY
+    #endif
 #endif
 
 #ifdef STENO_ENABLE
@@ -106,7 +104,7 @@ extern layer_state_t default_layer_state;
 #endif
 
 #ifdef TAP_DANCE_ENABLE
-  #include "process_tap_dance.h"
+    #include "process_tap_dance.h"
 #endif
 
 #ifdef PRINTING_ENABLE
@@ -132,7 +130,7 @@ extern layer_state_t default_layer_state;
 #endif
 
 #ifdef SPACE_CADET_ENABLE
-  #include "process_space_cadet.h"
+    #include "process_space_cadet.h"
 #endif
 
 #ifdef HD44780_ENABLE
@@ -147,50 +145,38 @@ extern layer_state_t default_layer_state;
     #include "oled_driver.h"
 #endif
 
-//Function substitutions to ease GPIO manipulation
+// Function substitutions to ease GPIO manipulation
-#ifdef __AVR__
+#if defined(__AVR__)
-    #define PIN_ADDRESS(p, offset) _SFR_IO8(ADDRESS_BASE + (p >> PORT_SHIFTER) + offset)
+    typedef uint8_t pin_t;
 
-    #define pin_t uint8_t
+    #define PIN_ADDRESS(p, offset)  (_SFR_IO8(ADDRESS_BASE + ((p) >> PORT_SHIFTER) + (offset)))
-    #define setPinInput(pin) PIN_ADDRESS(pin, 1) &= ~ _BV(pin & 0xF)
+    #define setPinInput(pin)        (PIN_ADDRESS(pin, 1) &= ~_BV((pin) & 0xF))
-    #define setPinInputHigh(pin) ({\
+    #define setPinInputHigh(pin)    (PIN_ADDRESS(pin, 1) &= ~_BV((pin) & 0xF), \
-            PIN_ADDRESS(pin, 1) &= ~ _BV(pin & 0xF);\
+                                     PIN_ADDRESS(pin, 2) |=  _BV((pin) & 0xF))
-            PIN_ADDRESS(pin, 2) |=   _BV(pin & 0xF);\
+    #define setPinInputLow(pin)     _Static_assert(0, "AVR processors cannot implement an input as pull low")
-            })
+    #define setPinOutput(pin)       (PIN_ADDRESS(pin, 1) |=  _BV((pin) & 0xF))
-    #define setPinInputLow(pin) _Static_assert(0, "AVR Processors cannot impliment an input as pull low")
-    #define setPinOutput(pin) PIN_ADDRESS(pin, 1) |= _BV(pin & 0xF)
 
-    #define writePinHigh(pin) PIN_ADDRESS(pin, 2) |=  _BV(pin & 0xF)
+    #define writePinHigh(pin)       (PIN_ADDRESS(pin, 2) |=  _BV((pin) & 0xF))
-    #define writePinLow(pin) PIN_ADDRESS(pin, 2) &= ~_BV(pin & 0xF)
+    #define writePinLow(pin)        (PIN_ADDRESS(pin, 2) &= ~_BV((pin) & 0xF))
-    static inline void writePin(pin_t pin, uint8_t level){
+    #define writePin(pin, level)    ((level) ? writePinHigh(pin) : writePinLow(pin))
-        if (level){
-            PIN_ADDRESS(pin, 2) |=  _BV(pin & 0xF);
-        } else {
-            PIN_ADDRESS(pin, 2) &= ~_BV(pin & 0xF);
-        }
-    }
 
-    #define readPin(pin) ((bool)(PIN_ADDRESS(pin, 0) & _BV(pin & 0xF)))
+    #define readPin(pin)            ((bool)(PIN_ADDRESS(pin, 0) & _BV((pin) & 0xF)))
 #elif defined(PROTOCOL_CHIBIOS)
-    #define pin_t ioline_t
+    typedef ioline_t pin_t;
-    #define setPinInput(pin) palSetLineMode(pin, PAL_MODE_INPUT)
-    #define setPinInputHigh(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)
-    #define setPinInputLow(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)
-    #define setPinOutput(pin) palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)
 
-    #define writePinHigh(pin) palSetLine(pin)
+    #define setPinInput(pin)        palSetLineMode(pin, PAL_MODE_INPUT)
-    #define writePinLow(pin) palClearLine(pin)
+    #define setPinInputHigh(pin)    palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)
-    static inline void writePin(pin_t pin, uint8_t level){
+    #define setPinInputLow(pin)     palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)
-        if (level){
+    #define setPinOutput(pin)       palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)
-            palSetLine(pin);
-        } else {
-            palClearLine(pin);
-        }
-    }
 
-    #define readPin(pin) palReadLine(pin)
+    #define writePinHigh(pin)       palSetLine(pin)
+    #define writePinLow(pin)        palClearLine(pin)
+    #define writePin(pin, level)    ((level) ? writePinHigh(pin) : writePinLow(pin))
+
+    #define readPin(pin)            palReadLine(pin)
 #endif
 
+// Send string macros
 #define STRINGIZE(z) #z
 #define ADD_SLASH_X(y) STRINGIZE(\x ## y)
 #define SYMBOL_STR(x) ADD_SLASH_X(x)
@@ -203,6 +189,7 @@ extern layer_state_t default_layer_state;
 #define SS_DOWN(keycode) "\2" SYMBOL_STR(keycode)
 #define SS_UP(keycode) "\3" SYMBOL_STR(keycode)
 
+// `string` arguments must not be parenthesized
 #define SS_LCTRL(string) SS_DOWN(X_LCTRL) string SS_UP(X_LCTRL)
 #define SS_LGUI(string) SS_DOWN(X_LGUI) string SS_UP(X_LGUI)
 #define SS_LCMD(string) SS_LGUI(string)
@@ -212,10 +199,12 @@ extern layer_state_t default_layer_state;
 #define SS_RALT(string) SS_DOWN(X_RALT) string SS_UP(X_RALT)
 #define SS_ALGR(string) SS_RALT(string)
 
-#define SEND_STRING(str) send_string_P(PSTR(str))
+#define SEND_STRING(string) send_string_P(PSTR(string))
+
 extern const bool ascii_to_shift_lut[0x80];
 extern const bool ascii_to_altgr_lut[0x80];
 extern const uint8_t ascii_to_keycode_lut[0x80];
+
 void send_string(const char *str);
 void send_string_with_delay(const char *str, uint8_t interval);
 void send_string_P(const char *str);
@@ -244,10 +233,10 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record);
 bool process_record_user(uint16_t keycode, keyrecord_t *record);
 
 #ifndef BOOTMAGIC_LITE_COLUMN
-  #define BOOTMAGIC_LITE_COLUMN 0
+    #define BOOTMAGIC_LITE_COLUMN 0
 #endif
 #ifndef BOOTMAGIC_LITE_ROW
-  #define BOOTMAGIC_LITE_ROW 0
+    #define BOOTMAGIC_LITE_ROW 0
 #endif
 
 void bootmagic_lite(void);
@@ -268,7 +257,7 @@ void backlight_task_internal(void);
 void backlight_on(uint8_t backlight_pin);
 void backlight_off(uint8_t backlight_pin);
 
-#ifdef BACKLIGHT_BREATHING
+    #ifdef BACKLIGHT_BREATHING
 void breathing_task(void);
 void breathing_enable(void);
 void breathing_pulse(void);
@@ -282,9 +271,9 @@ void breathing_period_default(void);
 void breathing_period_set(uint8_t value);
 void breathing_period_inc(void);
 void breathing_period_dec(void);
+    #endif
 #endif
 
-#endif
 void send_dword(uint32_t number);
 void send_word(uint16_t number);
 void send_byte(uint8_t number);
@@ -295,5 +284,3 @@ void led_set_user(uint8_t usb_led);
 void led_set_kb(uint8_t usb_led);
 
 void api_send_unicode(uint32_t unicode);
-
-#endif

quantum/template/avr/config.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2019 %YOUR_NAME%
+Copyright %YEAR% %YOUR_NAME%
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by

quantum/template/avr/template.c

@@ -1,4 +1,4 @@
-/* Copyright 2019 %YOUR_NAME%
+/* Copyright %YEAR% %YOUR_NAME%
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

quantum/template/base/keymaps/default/config.h

@@ -1,4 +1,4 @@
-/* Copyright 2019 %YOUR_NAME%
+/* Copyright %YEAR% %YOUR_NAME%
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

quantum/template/base/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-/* Copyright 2019 %YOUR_NAME%
+/* Copyright %YEAR% %YOUR_NAME%
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

quantum/template/base/template.h

@@ -1,4 +1,4 @@
-/* Copyright 2019 %YOUR_NAME%
+/* Copyright %YEAR% %YOUR_NAME%
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

quantum/template/ps2avrgb/config.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2017 Luiz Ribeiro <[email protected]>
+Copyright %YEAR% %YOUR_NAME%
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by

quantum/template/ps2avrgb/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2019 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 PROTOCOL = VUSB

quantum/template/ps2avrgb/template.c

@@ -1,4 +1,4 @@
-/* Copyright 2019 %YOUR_NAME%
+/* Copyright %YEAR% %YOUR_NAME%
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

quantum/template/ps2avrgb/usbconfig.h

@@ -1,13 +1,3 @@
-/* Name: usbconfig.h
- * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
- * Author: Christian Starkjohann
- * Creation Date: 2005-04-01
- * Tabsize: 4
- * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
- * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
- * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
- */
-
 #pragma once
 
 #include "config.h"

tmk_core/chibios.mk

@@ -201,7 +201,6 @@ DFU_ARGS ?=
 ifneq ("$(SERIAL)","")
 	DFU_ARGS += -S $(SERIAL)
 endif
-DFU_SUFFIX_ARGS ?=
 
 ST_LINK_ARGS ?=
 
@@ -209,7 +208,6 @@ ST_LINK_ARGS ?=
 EXTRALIBDIRS = $(RULESPATH)/ld
 
 DFU_UTIL ?= dfu-util
-DFU_SUFFIX ?= dfu-suffix
 ST_LINK_CLI ?= st-link_cli
 
 # Generate a .qmk for the QMK-FF
@@ -274,7 +272,3 @@ teensy: $(BUILD_DIR)/$(TARGET).hex cpfirmware sizeafter
 	$(TEENSY_LOADER_CLI) -mmcu=$(MCU_LDSCRIPT) -w -v $(BUILD_DIR)/$(TARGET).hex
 
 bin: $(BUILD_DIR)/$(TARGET).bin sizeafter
-	if [ ! -z "$(DFU_SUFFIX_ARGS)" ]; then \
-		$(DFU_SUFFIX) $(DFU_SUFFIX_ARGS) -a $(BUILD_DIR)/$(TARGET).bin 1>/dev/null ;\
-	fi
-	$(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin;

tmk_core/rules.mk

@@ -223,6 +223,10 @@ $(foreach LOBJ, $(NO_LTO_OBJ), $(eval $(call NO_LTO,$(LOBJ))))
 
 MOVE_DEP = mv -f $(patsubst %.o,%.td,$@) $(patsubst %.o,%.d,$@)
 
+# Add QMK specific flags
+DFU_SUFFIX ?= dfu-suffix
+DFU_SUFFIX_ARGS ?=
+
 
 elf: $(BUILD_DIR)/$(TARGET).elf
 hex: $(BUILD_DIR)/$(TARGET).hex
@@ -279,6 +283,10 @@ gccversion :
 	@$(SILENT) || printf "$(MSG_BIN) $@" | $(AWK_CMD)
 	$(eval CMD=$(BIN) $< $@ || exit 0)
 	@$(BUILD_CMD)
+	if [ ! -z "$(DFU_SUFFIX_ARGS)" ]; then \
+		$(DFU_SUFFIX) $(DFU_SUFFIX_ARGS) -a $(BUILD_DIR)/$(TARGET).bin 1>/dev/null ;\
+	fi
+	$(COPY) $(BUILD_DIR)/$(TARGET).bin $(TARGET).bin;
 
 BEGIN = gccversion sizebefore
 

users/konstantin/config.h

@@ -14,8 +14,9 @@
 #define NO_ACTION_ONESHOT
 
 #define PERMISSIVE_HOLD
-#define TAPPING_TERM    200
+#define TAPPING_TERM        200
-#define TAPPING_TOGGLE  2
+#define TAPPING_TOGGLE      2
+#define TAP_HOLD_CAPS_DELAY 50
 
 #define UNICODE_CYCLE_PERSIST  false
 #define UNICODE_SELECTED_MODES UC_WINC, UC_WIN, UC_LNX

users/mattly/config.h

@@ -0,0 +1,9 @@
+#pragma once
+
+// Most tactile encoders have detents every 4 stages
+#define ENCODER_RESOLUTION 4
+
+#define IGNORE_MOD_TAP_INTERRUPT
+#define PERMISSIVE_HOLD
+#define TAPPING_TOGGLE 2
+#define TAPPING_TERM 200

users/mattly/mattly.c

@@ -0,0 +1,70 @@
+#include "mattly.h"
+
+__attribute__ ((weak))
+layer_state_t layer_state_set_keymap (layer_state_t state) {
+  return state;
+}
+
+void set_lights_default(void) {
+    #ifdef RGBLIGHT_ENABLE
+        if (IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) {
+            rgblight_sethsv_noeeprom(HSV_CAPS);
+        } else {
+            rgblight_sethsv_noeeprom(HSV_DEFAULT);
+        }
+    #endif
+}
+
+void layer_state_set_rgb(layer_state_t state) {
+#ifdef RGBLIGHT_ENABLE
+    switch (biton32(state)) {
+        case _QWERTY:
+            set_lights_default();
+            break;
+        case _SYMBOL:
+            rgblight_sethsv_noeeprom(HSV_SYMBOL);
+            break;
+        case _NAVNUM:
+            rgblight_sethsv_noeeprom(HSV_NAVNUM);
+            break;
+        case _FUNCT:
+            rgblight_sethsv_noeeprom(HSV_FUNCT);
+            break;
+    }
+#endif
+}
+
+
+layer_state_t layer_state_set_user (layer_state_t state) {
+  state = update_tri_layer_state(state, _SYMBOL, _NAVNUM, _FUNCT);
+  layer_state_set_rgb(state);
+  return layer_state_set_keymap (state);
+}
+
+void on_reset(void) {
+    #ifdef RGBLIGHT_ENABLE
+    rgblight_sethsv_noeeprom(HSV_RESET);
+    #endif
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KC_CAPS:
+            #ifdef RGBLIGHT_ENABLE
+            set_lights_default();
+            #endif
+            return true;
+        case RESET:
+            on_reset();
+            return true;
+        default:
+            return true;
+    }
+}
+
+void keyboard_post_init_user(void) {
+#ifdef RGBLIGHT_ENABLE
+    rgblight_enable_noeeprom();
+    set_lights_default();
+#endif
+}

users/mattly/mattly.h

@@ -0,0 +1,83 @@
+/* Copyright 2019 Matthew Lyon
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef USERSPACE
+#define USERSPACE
+
+#include "quantum.h"
+
+enum {
+    _QWERTY,
+    _NAVNUM,
+    _SYMBOL,
+    _FUNCT,
+};
+
+// left hand
+#define ESC_HYP MT(MOD_HYPR, KC_ESC)
+#define BSP_NUM LT(_NAVNUM, KC_BSPC)
+#define ENT_SFT MT(MOD_LSFT, KC_ENT)
+#define SPC_SFT MT(MOD_LSFT, KC_SPC)
+
+// right hand
+#define SPC_SFT MT(MOD_LSFT, KC_SPC)
+#define TAB_SYM LT(_SYMBOL, KC_TAB)
+#define DEL_WRP MT(MOD_LCTL | MOD_LALT | MOD_LGUI, KC_DEL)
+
+#define NAVLOCK TG(_NAVNUM)
+#define SYMLOCK TG(_SYMBOL)
+
+
+// QWERTY
+
+#define A_CTRL  MT(MOD_LCTL, KC_A)
+#define S_ALT   MT(MOD_LALT, KC_S)
+#define D_GUI   MT(MOD_LGUI, KC_D)
+#define F_SHFT  MT(MOD_LSFT, KC_F)
+#define J_SHFT  MT(MOD_RSFT, KC_J)
+#define K_GUI   MT(MOD_RGUI, KC_K)
+#define L_ALT   MT(MOD_RALT, KC_L)
+#define MINSCTL MT(MOD_RCTL, KC_MINS)
+
+#define BWORD   LALT(KC_LEFT)
+#define FWORD   LALT(KC_RIGHT)
+
+// OS X default keys
+#define NWIN    LGUI(KC_GRV)        // Next Window
+#define PWIN    LGUI(LSFT(KC_GRV))  // Prev Window
+#define NTAB    LGUI(LSFT(KC_RBRC)) // Next Tab
+#define PTAB    LGUI(LSFT(KC_LBRC)) // Prev Tab
+#define NAVBACK LGUI(KC_LBRC)       // Navigate Forward
+#define NAVFWD  LGUI(KC_RBRC)       // Navigate Back
+
+// my personal mappings to window manager commands
+#define XALLWIN HYPR(KC_F14)
+#define XDESKTP HYPR(KC_F15)
+#define XNXTSPC HYPR(KC_F16)
+#define XPRVSPC HYPR(KC_F17)
+#define XNOTIFY HYPR(KC_F18)
+
+#ifdef RGBLIGHT_ENABLE
+#define HSV_CAPS     42, 255, 255
+#define HSV_DEFAULT  30, 218, 255
+#define HSV_SYMBOL   22, 255, 255
+#define HSV_NAVNUM  245, 200, 255
+#define HSV_FUNCT   233, 255, 255
+#define HSV_RESET   180, 255, 255
+#endif
+
+#endif
+

users/mattly/readme.md

@@ -0,0 +1,10 @@
+# mattly's layouts
+
+My layouts are based around:
+
+* making the most from small layouts on keyboards like the iris or planck
+* moving held-modifiers from pinkies to thumbs or home row, giving many keys dual purposes via mod/layer taps
+* easy home-row navigation on a layer, using standard keys, available to all programs, not just a specially-configured editor
+* easy access to punctuation symbols used in the programming languages I work in
+
+[Here is an image](https://lyonheart.us/etc/mattly-keymap.png) with an outdated description of my keymap

users/mattly/rules.mk

@@ -0,0 +1,2 @@
+SRC += mattly.c
+MOUSEKEY_ENABLE = yes