Parameterise STM32 I2C pin modes and timing parameters. (#5671)

I2C timing parameters were seemingly set up for an STM32F303 target MCU, at a specific clock speed. This commit allows specifying the timing parameters via config.h, allowing other STM32 MCUs to be targeted, potentially at different clock frequencies.
Alternate function modes for the I2C pins are now also configurable, allowing for remapping to other pins.

.travis.yml

@@ -11,31 +11,21 @@ env:
   global:
   - secure: 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
   - MAKEFLAGS="-j3 --output-sync"
+services:
+  - docker
 before_install:
-  - wget http://ww1.microchip.com/downloads/en/DeviceDoc/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz || wget http://qmk.fm/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
+  - docker build -t qmkfm/qmk_firmware .
-  # Need DFU > .5 for dfu-suffix
-  - sudo add-apt-repository --yes ppa:tormodvolden/ppa
-  - sudo apt-get update -qq
 install:
-  - tar -zxf avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
-  - export PATH="$PATH:$TRAVIS_BUILD_DIR/avr8-gnu-toolchain-linux_x86_64/bin"
   - npm install -g moxygen
-  - sudo apt-get -y --force-yes install dfu-util
-before_script:
-  - avr-gcc --version
 script:
-- git rev-parse --short HEAD
+  - git rev-parse --short HEAD
-- bash util/travis_test.sh
+  - bash util/travis_test.sh
-- bash util/travis_build.sh
+  - bash util/travis_build.sh
-- bash util/travis_docs.sh
+  - bash util/travis_docs.sh
 addons:
   apt:
     packages:
-    - dfu-programmer
     - pandoc
-    - gcc-arm-none-eabi
-    - binutils-arm-none-eabi
-    - libnewlib-arm-none-eabi
     - diffutils
     - dos2unix
     - doxygen

Dockerfile

@@ -19,11 +19,8 @@ RUN apt-get update && apt-get install --no-install-recommends -y \
     zip \
     && rm -rf /var/lib/apt/lists/*
 
-ENV KEYBOARD=ergodox_ez
-ENV KEYMAP=default
-
 VOLUME /qmk_firmware
 WORKDIR /qmk_firmware
 COPY . .
 
-CMD make $KEYBOARD:$KEYMAP
+CMD make all:default

docs/feature_encoders.md

@@ -38,7 +38,7 @@ or `keymap.c`:
         } else {
           tap_code(KC_PGUP);
         }
-      } else if (index == 1) { /* Second encoder
+      } else if (index == 1) { /* Second encoder */  
         if (clockwise) {
           tap_code(KC_UP);
         } else {

docs/getting_started_introduction.md

@@ -12,11 +12,17 @@ Within the folder `users` is a directory for each user. This is a place for user
 
 ### Keyboard Project Structure
 
-Within the folder `keyboards` and its subfolder `handwired` is a directory for each keyboard project, for example `qmk_firmware/keyboards/clueboard`. Within it you'll find the following structure:
+Within the folder `keyboards`, its subfolder `handwired` and its vendor and manufacture subdirectories e.g. `clueboard` is a directory for each keyboard project, for example `qmk_firmware/keyboards/clueboard/2x1800`. Within it, you'll find the following structure:
 
 * `keymaps/`: Different keymaps that can be built
 * `rules.mk`: The file that sets the default "make" options. Do not edit this file directly, instead use a keymap specific `rules.mk`.
 * `config.h`: The file that sets the default compile time options. Do not edit this file directly, instead use a keymap specific `config.h`.
+* `info.json`: The file used for setting layout for QMK Configurator. See [Configurator Support](reference_configurator_support.md) for more information.
+* `readme.md`: A brief overview of the keyboard.
+* `<keyboardName>.h`: This file is where the keyboard layout is defined against the keyboard's switch matrix.
+* `<keyboardName>.c`: This file is where you can find custom code for the keyboard.  
+
+For more information on project structure, see [QMK Keyboard Guidelines](hardware_keyboard_guidelines.md).
 
 ### Keymap Structure
 

docs/i2c_driver.md

@@ -65,11 +65,30 @@ By default the I2C1 hardware driver is assumed to be used. If another hardware d
 
 STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C. You can use these defines to set your i2c pins:
 
-| Variable    | Description                                  | Default |
+| Variable                 | Description                                                                                  | Default |
-|-------------|----------------------------------------------|---------|
+|--------------------------|----------------------------------------------------------------------------------------------|---------|
-| `I2C1_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) | `GPIOB` |
+| `I2C1_SCL_BANK`          | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SCL                                  | `GPIOB` |
-| `I2C1_SCL`  | The pin number for the SCL pin (0-9)         | `6`     |
+| `I2C1_SDA_BANK`          | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SDA                                  | `GPIOB` |
-| `I2C1_SDA`  | The pin number for the SDA pin (0-9)         | `7`     |
+| `I2C1_SCL`               | The pin number for the SCL pin (0-9)                                                         | `6`     |
+| `I2C1_SDA`               | The pin number for the SDA pin (0-9)                                                         | `7`     |
+| `I2C1_BANK` (deprecated) | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`), superceded by `I2C1_SCL_BANK`, `I2C1_SDA_BANK` | `GPIOB` |
+
+STM32 MCUs allow for different timing parameters when configuring I2C. These can be modified using the following parameters, using https://www.st.com/en/embedded-software/stsw-stm32126.html as a reference:
+
+| Variable              | Default |
+|-----------------------|---------|
+| `I2C1_TIMINGR_PRESC`  | `15U`   |
+| `I2C1_TIMINGR_SCLDEL` | `4U`    |
+| `I2C1_TIMINGR_SDADEL` | `2U`    |
+| `I2C1_TIMINGR_SCLH`   | `15U`   |
+| `I2C1_TIMINGR_SCLL`   | `21U`   |
+
+STM32 MCUs allow for different "alternate function" modes when configuring GPIO pins. These are required to switch the pins used to I2C mode. See the respective datasheet for the appropriate values for your MCU.
+
+| Variable            | Default |
+|---------------------|---------|
+| `I2C1_SCL_PAL_MODE` | `4`     |
+| `I2C1_SDA_PAL_MODE` | `4`     |
 
 You can also overload the `void i2c_init(void)` function, which has a weak attribute. If you do this the configuration variables above will not be used. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function:
 

docs/reference_configurator_support.md

@@ -89,7 +89,7 @@ Once the layout is as desired, move to the Raw Data tab in KLE, and copy the con
 
 To convert this data into our JSON, go to the [QMK KLE-JSON Converter](https://qmk.fm/converter/), paste the Raw Data into the Input field, and click the Convert button. After a moment, our JSON data will appear in the Output field. Copy the contents to a new text document, and name the document `info.json`, saving it in the same folder that contains `numpad.h`.
 
-Use the `keyboard_name` object to set the name of the keyboard. The `bootloader` object is deprecated, so it can be deleted. For instruction purposes, we will put each key's object on its own line. This is only to make the file more human-readable, and does not affect the Configurator's functionality.
+Use the `keyboard_name` object to set the name of the keyboard. For instruction purposes, we will put each key's object on its own line. This is only to make the file more human-readable, and does not affect the Configurator's functionality.
 
 ```json
 {

drivers/arm/i2c_master.c

@@ -32,12 +32,10 @@
 
 static uint8_t i2c_address;
 
-// This configures the I2C clock to 400khz assuming a 72Mhz clock
-// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
 static const I2CConfig i2cconfig = {
-  STM32_TIMINGR_PRESC(15U) |
+  STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) |
-  STM32_TIMINGR_SCLDEL(4U) | STM32_TIMINGR_SDADEL(2U) |
+  STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) |
-  STM32_TIMINGR_SCLH(15U)  | STM32_TIMINGR_SCLL(21U),
+  STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH)  | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL),
   0,
   0
 };
@@ -58,13 +56,13 @@ __attribute__ ((weak))
 void i2c_init(void)
 {
   // Try releasing special pins for a short time
-  palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_INPUT);
+  palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT);
-  palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_INPUT);
+  palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT);
 
   chThdSleepMilliseconds(10);
 
-  palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
+  palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
-  palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
+  palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
 
   //i2cInit(); //This is invoked by halInit() so no need to redo it.
 }

drivers/arm/i2c_master.h

@@ -26,9 +26,19 @@
 #include "ch.h"
 #include <hal.h>
 
-#ifndef I2C1_BANK
+#ifdef I2C1_BANK
-    #define I2C1_BANK GPIOB
+    #define I2C1_SCL_BANK I2C1_BANK
+    #define I2C1_SDA_BANK I2C1_BANK
 #endif
+
+#ifndef I2C1_SCL_BANK
+    #define I2C1_SCL_BANK GPIOB
+#endif
+
+#ifndef I2C1_SDA_BANK
+    #define I2C1_SDA_BANK GPIOB
+#endif
+
 #ifndef I2C1_SCL
     #define I2C1_SCL 6
 #endif
@@ -36,6 +46,32 @@
     #define I2C1_SDA 7
 #endif
 
+// The default PAL alternate modes are used to signal that the pins are used for I2C
+#ifndef I2C1_SCL_PAL_MODE
+    #define I2C1_SCL_PAL_MODE 4
+#endif
+#ifndef I2C1_SDA_PAL_MODE
+    #define I2C1_SDA_PAL_MODE 4
+#endif
+
+// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+#ifndef I2C1_TIMINGR_PRESC
+    #define I2C1_TIMINGR_PRESC 15U
+#endif
+#ifndef I2C1_TIMINGR_SCLDEL
+    #define I2C1_TIMINGR_SCLDEL 4U
+#endif
+#ifndef I2C1_TIMINGR_SDADEL
+    #define I2C1_TIMINGR_SDADEL 2U
+#endif
+#ifndef I2C1_TIMINGR_SCLH
+    #define I2C1_TIMINGR_SCLH 15U
+#endif
+#ifndef I2C1_TIMINGR_SCLL
+    #define I2C1_TIMINGR_SCLL 21U
+#endif
+
 #ifndef I2C_DRIVER
   #define I2C_DRIVER I2CD1
 #endif

keyboards/ai03/soyuz/config.h

@@ -0,0 +1,245 @@
+/*
+Copyright 2019 Ryota Goto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xA103
+#define PRODUCT_ID      0x0004
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    ai03 Design Studio
+#define PRODUCT         Soyuz
+#define DESCRIPTION     Single-PCB Numpad Kit
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, B6, E6, B4 }
+#define MATRIX_COL_PINS { F4, B3, D7, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/ai03/soyuz/info.json

@@ -0,0 +1,33 @@
+{
+    "keyboard_name": "Soyuz", 
+    "url": "https://github.com/ai03-2725/soyuz", 
+    "maintainer": "ai03", 
+    "width": 4, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_ortho_5x4": {
+            "layout": [
+				{"x":0, "y":0},
+				{"x":1, "y":0},
+				{"x":2, "y":0},
+				{"x":3, "y":0},
+				{"x":0, "y":1},
+				{"x":1, "y":1},
+				{"x":2, "y":1},
+				{"x":3, "y":1},
+				{"x":0, "y":2},
+				{"x":1, "y":2},
+				{"x":2, "y":2},
+				{"x":3, "y":2},
+				{"x":0, "y":3},
+				{"x":1, "y":3},
+				{"x":2, "y":3},
+				{"x":3, "y":3},
+				{"x":0, "y":4},
+				{"x":1, "y":4},
+				{"x":2, "y":4},
+				{"x":3, "y":4}
+			]
+        }
+    }
+}

keyboards/ai03/soyuz/keymaps/1U/keymap.c

@@ -0,0 +1,57 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  DBLZERO = SAFE_RANGE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_ortho_5x4( /* Base */
+    KC_NLCK, KC_PSLS, KC_PAST, KC_BSPC, \
+	KC_P7,   KC_P8,   KC_P9,   KC_MINS, \
+	KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+	KC_P1,   KC_P2,   KC_P3,   KC_EQL,  \
+	DBLZERO, KC_P0,   KC_PDOT, KC_PENT  \
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case DBLZERO:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("00");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/ai03/soyuz/keymaps/1U/readme.md

@@ -0,0 +1,3 @@
+# The 1U keymap for Soyuz
+
+A keymap that uses 1U keys everywhere for a 20-key numpad.

keyboards/ai03/soyuz/keymaps/default/keymap.c

@@ -0,0 +1,42 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_ortho_5x4( /* Base */
+    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+	KC_P7,   KC_P8,   KC_P9,   KC_PPLS, \
+	KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+	KC_P1,   KC_P2,   KC_P3,   KC_PENT, \
+	KC_P0,   KC_P0,   KC_PDOT, KC_PENT  \
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/ai03/soyuz/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+# The default keymap for Soyuz
+
+A very basic keymap for a "typical" numpad layout using 2U keys wherever applicable.

keyboards/ai03/soyuz/readme.md

@@ -0,0 +1,15 @@
+# Soyuz
+
+![soyuz](https://raw.githubusercontent.com/ai03-2725/Soyuz/master/Renders/Front.png)
+
+A single-PCB numpad kit  
+
+Keyboard Maintainer: [ai03](https://github.com/ai03-2725)  
+Hardware Supported: [Soyuz PCB](https://github.com/ai03-2725/soyuz)  
+Hardware Availability: Various vendors - List will be maintained in the [PCB repo](https://github.com/ai03-2725/soyuz)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make ai03/soyuz:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ai03/soyuz/rules.mk

@@ -0,0 +1,82 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = ortho_5x4

keyboards/ai03/soyuz/soyuz.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "soyuz.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/ai03/soyuz/soyuz.h

@@ -0,0 +1,41 @@
+/* Copyright 2019 Ryota Goto
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+ 
+#define LAYOUT_ortho_5x4( \
+	K00, K01, K02, K03, \
+	K10, K11, K12, K13, \
+	K20, K21, K22, K23, \
+	K30, K31, K32, K33, \
+	K40, K41, K42, K43  \
+) { \
+	{ K00, K01, K02, K03 }, \
+	{ K10, K11, K12, K13 }, \
+	{ K20, K21, K22, K23 }, \
+	{ K30, K31, K32, K33 }, \
+	{ K40, K41, K42, K43 }  \
+}

keyboards/akb/eb46/config.h

@@ -0,0 +1,52 @@
+/*
+Copyright 2019 Elliot Powell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x4646
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Elliot Powell
+#define PRODUCT eb46
+#define DESCRIPTION eb46 running qmk
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 13
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS \
+  { B5, B4, D7, B6 }
+#define MATRIX_COL_PINS \
+  { B0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D4, D6, C6 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5

keyboards/akb/eb46/eb46.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "eb46.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/akb/eb46/eb46.h

@@ -0,0 +1,40 @@
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define xxx KC_NO
+
+#define LAYOUT(\
+  k000, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b,\
+	k100, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,     \
+	k200, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,     \
+	k300, k30, k31, k32, k33,           k36,      k38, k39, k3a     \
+) \
+{ \
+  {k000, k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b},\
+	{k100, k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, xxx},\
+	{k200, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, xxx},\
+	{k300, k30, k31, k32, k33, xxx, xxx, k36, xxx, k38, k39, k3a, xxx} \
+}

keyboards/akb/eb46/info.json

@@ -0,0 +1,58 @@
+{
+    "keyboard_name": "eb46",
+    "maintainer": "e11i0t23",
+    "width": 13.25,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "label": "F1", "x": 0, "y": 0 },
+                { "label": "Esc", "x": 1.25, "y": 0 },
+                { "label": "Q", "x": 2.25, "y": 0 },
+                { "label": "W", "x": 3.25, "y": 0 },
+                { "label": "E", "x": 4.25, "y": 0 },
+                { "label": "R", "x": 5.25, "y": 0 },
+                { "label": "T", "x": 6.25, "y": 0 },
+                { "label": "Y", "x": 7.25, "y": 0 },
+                { "label": "U", "x": 8.25, "y": 0 },
+                { "label": "I", "x": 9.25, "y": 0 },
+                { "label": "O", "x": 10.25, "y": 0 },
+                { "label": "P", "x": 11.25, "y": 0 },
+                { "label": "BackSpace", "x": 12.25, "y": 0 },
+                { "label": "F2", "x": 0, "y": 1 },
+                { "label": "Tab", "x": 1.25, "y": 1, "w": 1.25 },
+                { "label": "A", "x": 2.5, "y": 1 },
+                { "label": "S", "x": 3.5, "y": 1 },
+                { "label": "D", "x": 4.5, "y": 1 },
+                { "label": "F", "x": 5.5, "y": 1 },
+                { "label": "G", "x": 6.5, "y": 1 },
+                { "label": "H", "x": 7.5, "y": 1 },
+                { "label": "J", "x": 8.5, "y": 1 },
+                { "label": "K", "x": 9.5, "y": 1 },
+                { "label": "L", "x": 10.5, "y": 1 },
+                { "label": "Enter", "x": 11.5, "y": 1, "w": 1.75 },
+                { "label": "F3", "x": 0, "y": 2 },
+                { "label": "Shift", "x": 1.25, "y": 2, "w": 1.75 },
+                { "label": "Z", "x": 3, "y": 2 },
+                { "label": "X", "x": 4, "y": 2 },
+                { "label": "C", "x": 5, "y": 2 },
+                { "label": "V", "x": 6, "y": 2 },
+                { "label": "B", "x": 7, "y": 2 },
+                { "label": "N", "x": 8, "y": 2 },
+                { "label": "M", "x": 9, "y": 2 },
+                { "label": "<", "x": 10, "y": 2 },
+                { "label": ">", "x": 11, "y": 2 },
+                { "label": "RShift", "x": 12, "y": 2, "w": 1.25 },
+                { "label": "F4", "x": 0, "y": 3 },
+                { "label": "Ctrl", "x": 1.25, "y": 3, "w": 1.25 },
+                { "label": "Win", "x": 2.5, "y": 3 },
+                { "label": "Alt", "x": 3.5, "y": 3, "w": 1.25 },
+                { "label": "FN0", "x": 4.75, "y": 3, "w": 2.25 },
+                { "label": "Space", "x": 7, "y": 3, "w": 2.75 },
+                { "label": "Menu", "x": 9.75, "y": 3 },
+                { "label": "RAlt", "x": 10.75, "y": 3, "w": 1.25 },
+                { "label": "Super", "x": 12.25, "y": 3 }
+            ]
+        }
+    }
+}

keyboards/akb/eb46/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+  KC_F5,    KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+  KC_PGUP,  KC_TAB,  KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,       KC_ENT, 
+  KC_PGDN,  KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_RSFT,
+  KC_ESC,   LCTL_T(KC_LBRC), KC_LGUI, KC_LALT,  KC_SPC,  LT(1, KC_SPC), KC_RALT, MO(2), RCTL_T(KC_RBRC) ),
+  [1] = LAYOUT( /* Base */
+  _______,  _______,  KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0,     _______,
+  _______,  _______,  _______, _______, _______, _______, _______, KC_LEFT, KC_UP,   KC_DOWN, KC_RIGHT,         _______,
+  _______,  _______,           KC_VOLD, KC_MUTE, KC_VOLU, _______, _______, _______, _______, KC_MINS, KC_EQL, _______,
+  _______,  _______,  _______, _______,          _______,          _______,          _______, _______, _______ ),
+  [2] = LAYOUT( /* Base */
+  _______,  KC_F1  ,  KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 ,
+  _______,  _______,  _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_NUHS,          _______,
+  _______,  _______,           KC_NUBS, _______, _______, _______, _______, _______, _______, KC_SLSH, _______, _______,
+  _______,  _______,  _______, _______,          _______,          _______,          _______, _______,  RESET ),
+};

keyboards/akb/eb46/readme.md

@@ -0,0 +1,13 @@
+# eb46
+
+EB46: A 40% plus macro keys
+
+Keyboard Maintainer: [Elliot Powell](https://github.com/e11i0t23), [/u/e11i0t23 on reddit](https://reddit.com/u/e11i0t23)  
+Hardware Supported: EB46 PCB  
+Hardware Availability: Coming Soon
+
+Make example for this keyboard (after setting up your build environment):
+
+    make akb/eb46:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/akb/eb46/rules.mk

@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/akb/raine/config.h

@@ -0,0 +1,52 @@
+/*
+Copyright 2019 Elliot Powell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER AKB
+#define PRODUCT Raine M3
+#define DESCRIPTION Raine M3
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS \
+  { E6, C6, F7, B2, B0 }
+#define MATRIX_COL_PINS \
+  { F6, F5, F4, B1, F1, F0, B3, B7, D0, D1, D2, D3, D5, D4, D6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/akb/raine/info.json

@@ -0,0 +1,84 @@
+{
+    "keyboard_name": "raine",
+    "maintainer": "e11i0t23",
+    "width": 16.25,
+    "height": 5.25,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                { "label": "Esc", "x": 0, "y": 0 },
+                { "label": "1", "x": 1, "y": 0 },
+                { "label": "2", "x": 2, "y": 0 },
+                { "label": "3", "x": 3, "y": 0 },
+                { "label": "4", "x": 4, "y": 0 },
+                { "label": "5", "x": 5, "y": 0 },
+                { "label": "6", "x": 6, "y": 0 },
+                { "label": "7", "x": 7, "y": 0 },
+                { "label": "8", "x": 8, "y": 0 },
+                { "label": "9", "x": 9, "y": 0 },
+                { "label": "0", "x": 10, "y": 0 },
+                { "label": "_", "x": 11, "y": 0 },
+                { "label": "BSP", "x": 12, "y": 0 },
+                { "label": "Num Lock", "x": 13.25, "y": 0 },
+                { "label": "Scroll Lock", "x": 14.25, "y": 0 },
+                { "label": "Insert", "x": 15.25, "y": 0 },
+                { "label": "Tab", "x": 0, "y": 1, "w": 1.5 },
+                { "label": "Q", "x": 1.5, "y": 1 },
+                { "label": "W", "x": 2.5, "y": 1 },
+                { "label": "E", "x": 3.5, "y": 1 },
+                { "label": "R", "x": 4.5, "y": 1 },
+                { "label": "T", "x": 5.5, "y": 1 },
+                { "label": "Y", "x": 6.5, "y": 1 },
+                { "label": "U", "x": 7.5, "y": 1 },
+                { "label": "I", "x": 8.5, "y": 1 },
+                { "label": "O", "x": 9.5, "y": 1 },
+                { "label": "P", "x": 10.5, "y": 1 },
+                { "label": "|", "x": 11.5, "y": 1, "w": 1.5 },
+                { "label": "7", "x": 13.25, "y": 1 },
+                { "label": "8", "x": 14.25, "y": 1 },
+                { "label": "9", "x": 15.25, "y": 1 },
+                { "label": "Caps", "x": 0, "y": 2, "w": 1.75 },
+                { "label": "A", "x": 1.75, "y": 2 },
+                { "label": "S", "x": 2.75, "y": 2 },
+                { "label": "D", "x": 3.75, "y": 2 },
+                { "label": "F", "x": 4.75, "y": 2 },
+                { "label": "G", "x": 5.75, "y": 2 },
+                { "label": "H", "x": 6.75, "y": 2 },
+                { "label": "J", "x": 7.75, "y": 2 },
+                { "label": "K", "x": 8.75, "y": 2 },
+                { "label": "L", "x": 9.75, "y": 2 },
+                { "label": "~", "x": 10.75, "y": 2 },
+                { "label": "ENTER", "x": 11.75, "y": 2, "w": 1.25 },
+                { "label": "4", "x": 13.25, "y": 2 },
+                { "label": "5", "x": 14.25, "y": 2 },
+                { "label": "6", "x": 15.25, "y": 2 },
+                { "label": "Shift", "x": 0, "y": 3, "w": 1.25 },
+                { "label": "|", "x": 1.25, "y": 3 },
+                { "label": "Z", "x": 2.25, "y": 3 },
+                { "label": "X", "x": 3.25, "y": 3 },
+                { "label": "C", "x": 4.25, "y": 3 },
+                { "label": "V", "x": 5.25, "y": 3 },
+                { "label": "B", "x": 6.25, "y": 3 },
+                { "label": "N", "x": 7.25, "y": 3 },
+                { "label": "M", "x": 8.25, "y": 3 },
+                { "label": "?", "x": 9.25, "y": 3 },
+                { "label": "Shift", "x": 10.25, "y": 3, "w": 1.5 },
+                { "x": 12, "y": 3.25 },
+                { "label": "1", "x": 13.25, "y": 3 },
+                { "label": "2", "x": 14.25, "y": 3 },
+                { "label": "3", "x": 15.25, "y": 3 },
+                { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 },
+                { "label": "Alt", "x": 2.25, "y": 4, "w": 1.25 },
+                { "label": "SPLEFT", "x": 3.5, "y": 4, "w": 2.25 },
+                { "label": "7U", "x": 5.75, "y": 4 },
+                { "label": "SPRIGHT", "x": 6.75, "y": 4, "w": 1.75 },
+                { "label": "Menu", "x": 9.5, "y": 4, "w": 1.25 },
+                { "x": 11, "y": 4.25 },
+                { "x": 12, "y": 4.25 },
+                { "x": 13, "y": 4.25 },
+                { "label": "0", "x": 14.25, "y": 4 },
+                { "label": "Del", "x": 15.25, "y": 4 }
+            ]
+        }
+    }
+}

keyboards/akb/raine/keymaps/default/keymap.c

@@ -0,0 +1,32 @@
+/* Copyright 2019 Elliot Powell
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+  KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_BSPC, KC_NLCK, KC_SLCK, KC_INS,
+	KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_P7, KC_P8, KC_P9,
+	MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_HASH, KC_ENT, KC_P4, KC_P5, KC_P6,
+	KC_LSFT, KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_SLSH, KC_LSFT, KC_UP, KC_P1, KC_P2, KC_P3,
+	KC_LCTL, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LGUI, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_DEL),
+  [1] = LAYOUT( /* Second */
+  KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______,
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, _______, _______, _______, _______,
+	_______, _______, _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, _______, _______, _______, _______, _______,
+	_______, _______, _______, _______, _______, _______, _______, KC_COMM, KC_DOT, _______, _______, _______, _______, _______, _______,
+	_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET),
+};
+

keyboards/akb/raine/raine.c

@@ -0,0 +1,18 @@
+/*
+Copyright 2019 Elliot Powell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "raine.h"

keyboards/akb/raine/raine.h

@@ -0,0 +1,33 @@
+/*
+Copyright 2019 Elliot Powell
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111,       K113, K114, K115, \
+	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309,       K311, K312, K313, K314, K315, \
+	K400,       K402,       K404, K405,       K407,       K409,       K410,       K412, K413, K414, K415  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014,  K015 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  KC_NO, K113,  K114,  K115 }, \
+	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214,  K215 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K311,  KC_NO, K312,  K313,  K314,  K315 }, \
+	{ K400,  KC_NO,  K402,  KC_NO, K404,  K405,  KC_NO, K407,  KC_NO,  K409,  K410,  KC_NO, K412,  K413,  K414,  K415 }  \
+}

keyboards/akb/raine/readme.md

@@ -0,0 +1,15 @@
+# Raine-m³
+
+![Raine-m³](https://i.imgur.com/da2dZh1.jpg)
+
+A custom board inspired by both the 1800 layout, and the compact functionality of 40% boards.
+
+Keyboard Maintainer: [e11i0t23](https://github.com/e11i0t23)  
+Hardware Supported: Official Raine-m³ PCB  
+Hardware Availability: Coming Soon
+
+Make example for this keyboard (after setting up your build environment):
+
+    make akb/raine:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/akb/raine/rules.mk

@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/business_card/alpha/alpha.c

@@ -0,0 +1,51 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "alpha.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/business_card/alpha/alpha.h

@@ -0,0 +1,35 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01, k02, \
+    k10, k11, k12   \
+) \
+{ \
+    { k00, k01, k02 }, \
+    { k10, k11, k12 }, \
+}

keyboards/business_card/alpha/config.h

@@ -0,0 +1,243 @@
+/*
+Copyright 2019 kakunpc
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    kakunpc
+#define PRODUCT         business_card
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B2, B6 }
+#define MATRIX_COL_PINS { E6, B4, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 6
+   #define RGBLIGHT_HUE_STEP 8
+   #define RGBLIGHT_SAT_STEP 8
+   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/business_card/alpha/keymaps/default/config.h

@@ -0,0 +1,22 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
+#ifdef RGB_DI_PIN
+   #define RGBLIGHT_ANIMATIONS
+#endif

keyboards/business_card/alpha/keymaps/default/keymap.c

@@ -0,0 +1,47 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+
+const uint16_t PROGMEM
+keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] =
+LAYOUT(/* Base */
+        KC_1, KC_2, KC_3,
+        KC_4, KC_5, KC_6
+),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; }
+
+void led_set_user(uint8_t usb_led) {}
+
+void keyboard_post_init_user(void) {
+    rgblight_enable_noeeprom();
+    rgblight_mode_noeeprom(RGBLIGHT_MODE_RAINBOW_MOOD);
+}
+
+#ifdef OLED_DRIVER_ENABLE
+static void render_logo(void) {
+    static const char PROGMEM qmk_logo[] = {0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+                                            0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+                                            0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0};
+
+    oled_write_P(qmk_logo, false);
+}
+void oled_task_user(void) { render_logo(); }
+#endif

keyboards/business_card/alpha/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for business_card

keyboards/business_card/alpha/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+OLED_DRIVER_ENABLE = yes

keyboards/business_card/beta/beta.c

@@ -0,0 +1,51 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "beta.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/business_card/beta/beta.h

@@ -0,0 +1,37 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01,  \
+    k10, k11,  \
+    k20, k21   \
+) \
+{ \
+    { k21, k20 }, \
+    { k11, k10 }, \
+    { k01, k00 }, \
+}

keyboards/business_card/beta/config.h

@@ -0,0 +1,243 @@
+/*
+Copyright 2019 kakunpc
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    kakunpc
+#define PRODUCT         business_card
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 2
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B3, B2, B6 }
+#define MATRIX_COL_PINS { B4, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 6
+   #define RGBLIGHT_HUE_STEP 8
+   #define RGBLIGHT_SAT_STEP 8
+   #define RGBLIGHT_VAL_STEP 8
+   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/business_card/beta/keymaps/default/config.h

@@ -0,0 +1,23 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
+
+#ifdef RGB_DI_PIN
+   #define RGBLIGHT_ANIMATIONS
+#endif

keyboards/business_card/beta/keymaps/default/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM
+keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] =
+LAYOUT(/* Base */
+        KC_1, KC_2,
+        KC_3, KC_4,
+        KC_5, KC_6
+),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; }
+
+void matrix_init_user(void) {
+    rgblight_enable_noeeprom();
+    rgblight_mode_noeeprom(RGBLIGHT_MODE_RAINBOW_MOOD);
+}
+
+void matrix_scan_user(void) {}
+
+void led_set_user(uint8_t usb_led) {}
+
+void keyboard_post_init_user(void) {}
+
+#ifdef OLED_DRIVER_ENABLE
+static void render_logo(void) {
+    static const char PROGMEM qmk_logo[] = {0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+                                            0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+                                            0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0};
+
+    oled_write_P(qmk_logo, false);
+}
+void oled_task_user(void) { render_logo(); }
+#endif

keyboards/business_card/beta/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for business_card

keyboards/business_card/beta/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+OLED_DRIVER_ENABLE = yes

keyboards/business_card/business_card.c

@@ -0,0 +1,51 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "business_card.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+/*
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/

keyboards/business_card/business_card.h

@@ -0,0 +1,25 @@
+/* Copyright 2019 kakunpc
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifdef KEYBOARD_business_card_alpha
+    #include "alpha.h"
+#endif
+#ifdef KEYBOARD_business_card_beta
+    #include "beta.h"
+#endif
+
+#include "quantum.h"

keyboards/business_card/readme.md

@@ -0,0 +1,15 @@
+# business_card
+
+![business_card](imgur.com image replace me!)
+
+A short description of the keyboard/project
+
+Keyboard Maintainer: [kakunpc](https://github.com/kakunpc)  
+Hardware Supported: The PCBs, controllers supported  
+Hardware Availability: links to where you can find this hardware
+
+Make example for this keyboard (after setting up your build environment):
+
+    make business_card:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/business_card/rules.mk

@@ -0,0 +1,83 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+DEFAULT_FOLDER = business_card/beta

keyboards/dc01/arrow/rules.mk

@@ -1,5 +1,5 @@
 SRC += matrix.c \
-       ../../../drivers/avr/i2c_slave.c
+       i2c_slave.c
 
 # MCU name
 #MCU = at90usb1286

keyboards/dc01/left/rules.mk

@@ -1,5 +1,5 @@
 SRC += matrix.c \
-      ../../../drivers/avr/i2c_master.c
+       i2c_master.c
 
 # MCU name
 #MCU = at90usb1286

keyboards/dc01/numpad/rules.mk

@@ -1,5 +1,5 @@
 SRC += matrix.c \
-       ../../../drivers/avr/i2c_slave.c
+       i2c_slave.c
 
 # MCU name
 #MCU = at90usb1286

keyboards/dc01/right/rules.mk

@@ -1,5 +1,5 @@
 SRC += matrix.c \
-       ../../../drivers/avr/i2c_slave.c
+       i2c_slave.c
 
 # MCU name
 #MCU = at90usb1286

keyboards/duck/octagon/v1/info.json

@@ -5,8 +5,94 @@
     "width": 16, 
     "height": 6, 
     "layouts": {
-        "LAYOUT": {
+        "LAYOUT_75_ansi": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"PrtSc", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Home", "x":15, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Page Up", "x":15, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"x":12.75, "y":3}, {"label":"Enter", "x":13.75, "y":3, "w":1.25}, {"label":"Page Down", "x":15, "y":3}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"\u2191", "x":14, "y":4}, {"label":"End", "x":15, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Fn", "x":11, "y":5}, {"label":"Ctrl", "x":12, "y":5}, {"label":"\u2190", "x":13, "y":5}, {"label":"\u2193", "x":14, "y":5}, {"label":"\u2192", "x":15, "y":5}]
+            "key_count": 84,
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"F1", "x":1, "y":0},
+                {"label":"F2", "x":2, "y":0},
+                {"label":"F3", "x":3, "y":0},
+                {"label":"F4", "x":4, "y":0},
+                {"label":"F5", "x":5, "y":0},
+                {"label":"F6", "x":6, "y":0},
+                {"label":"F7", "x":7, "y":0},
+                {"label":"F8", "x":8, "y":0},
+                {"label":"F9", "x":9, "y":0},
+                {"label":"F10", "x":10, "y":0},
+                {"label":"F11", "x":11, "y":0},
+                {"label":"F12", "x":12, "y":0},
+                {"label":"PrtSc", "x":13, "y":0},
+                {"label":"ScrLk", "x":14, "y":0},
+                {"label":"Pause", "x":15, "y":0},
+                {"label":"~", "x":0, "y":1},
+                {"label":"!", "x":1, "y":1},
+                {"label":"@", "x":2, "y":1},
+                {"label":"#", "x":3, "y":1},
+                {"label":"$", "x":4, "y":1},
+                {"label":"%", "x":5, "y":1},
+                {"label":"^", "x":6, "y":1},
+                {"label":"&", "x":7, "y":1},
+                {"label":"*", "x":8, "y":1},
+                {"label":"(", "x":9, "y":1},
+                {"label":")", "x":10, "y":1},
+                {"label":"_", "x":11, "y":1},
+                {"label":"+", "x":12, "y":1},
+                {"label":"Backspace", "x":13, "y":1, "w":2},
+                {"label":"Home", "x":15, "y":1},
+                {"label":"Tab", "x":0, "y":2, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2},
+                {"label":"W", "x":2.5, "y":2},
+                {"label":"E", "x":3.5, "y":2},
+                {"label":"R", "x":4.5, "y":2},
+                {"label":"T", "x":5.5, "y":2},
+                {"label":"Y", "x":6.5, "y":2},
+                {"label":"U", "x":7.5, "y":2},
+                {"label":"I", "x":8.5, "y":2},
+                {"label":"O", "x":9.5, "y":2},
+                {"label":"P", "x":10.5, "y":2},
+                {"label":"{", "x":11.5, "y":2},
+                {"label":"}", "x":12.5, "y":2},
+                {"label":"|", "x":13.5, "y":2, "w":1.5},
+                {"label":"Page Up", "x":15, "y":2},
+                {"label":"Caps Lock", "x":0, "y":3, "w":1.75},
+                {"label":"A", "x":1.75, "y":3},
+                {"label":"S", "x":2.75, "y":3},
+                {"label":"D", "x":3.75, "y":3},
+                {"label":"F", "x":4.75, "y":3},
+                {"label":"G", "x":5.75, "y":3},
+                {"label":"H", "x":6.75, "y":3},
+                {"label":"J", "x":7.75, "y":3},
+                {"label":"K", "x":8.75, "y":3},
+                {"label":"L", "x":9.75, "y":3},
+                {"label":":", "x":10.75, "y":3},
+                {"label":"\"", "x":11.75, "y":3},
+                {"label":"Enter", "x":12.75, "y":3, "w":2.25},
+                {"label":"Page Down", "x":15, "y":3},
+                {"label":"Shift", "x":0, "y":4, "w":2.25},
+                {"label":"Z", "x":2.25, "y":4},
+                {"label":"X", "x":3.25, "y":4},
+                {"label":"C", "x":4.25, "y":4},
+                {"label":"V", "x":5.25, "y":4},
+                {"label":"B", "x":6.25, "y":4},
+                {"label":"N", "x":7.25, "y":4},
+                {"label":"M", "x":8.25, "y":4},
+                {"label":"<", "x":9.25, "y":4},
+                {"label":">", "x":10.25, "y":4},
+                {"label":"?", "x":11.25, "y":4},
+                {"label":"Shift", "x":12.25, "y":4, "w":1.75},
+                {"label":"\u2191", "x":14, "y":4},
+                {"label":"End", "x":15, "y":4},
+                {"label":"Ctrl", "x":0, "y":5, "w":1.25},
+                {"label":"Win", "x":1.25, "y":5, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":5, "w":1.25},
+                {"label":"Space", "x":3.75, "y":5, "w":6.25},
+                {"label":"Alt", "x":10, "y":5},
+                {"label":"Fn", "x":11, "y":5},
+                {"label":"Ctrl", "x":12, "y":5},
+                {"label":"\u2190", "x":13, "y":5},
+                {"label":"\u2193", "x":14, "y":5},
+                {"label":"\u2192", "x":15, "y":5}
+            ]
         }
     }
 }

keyboards/duck/octagon/v1/rules.mk

@@ -69,4 +69,5 @@ RGBLIGHT_ENABLE = yes
 
 CUSTOM_MATRIX = yes
 SRC += matrix.c \
-		
+
+LAYOUTS = 75_ansi

keyboards/duck/octagon/v1/v1.h

@@ -17,22 +17,6 @@
 
 #include "quantum.h"
 
-#define LAYOUT( \
-    K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5P, \
-    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4P, \
-    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, \
-    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K5O, K2N, K2P, \
-    K1A,      K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1N, K1P, \
-    K0A, K0B, K0C,                K0G,           K0J, K0K, K0L, K0M, K0N, K0P  \
-) { \
-  { K5A, K5B, K5C, K5D,   K5E,   K5F, K5G,   K5H,   K5I, K5J, K5K, K5L,   K5M,   K5N, K5O,   K5P }, \
-  { K4A, K4B, K4C, K4D,   K4E,   K4F, K4G,   K4H,   K4I, K4J, K4K, K4L,   K4M,   K4N, KC_NO, K4P }, \
-  { K3A, K3B, K3C, K3D,   K3E,   K3F, K3G,   K3H,   K3I, K3J, K3K, K3L,   K3M,   K3N, KC_NO, K3P }, \
-  { K2A, K2B, K2C, K2D,   K2E,   K2F, K2G,   K2H,   K2I, K2J, K2K, K2L,   KC_NO, K2N, KC_NO, K2P }, \
-  { K1A, K1C, K1D, K1E,   K1F,   K1G, K1H,   K1I,   K1J, K1K, K1L, KC_NO, K1M,   K1N, KC_NO, K1P }, \
-  { K0A, K0B, K0C, KC_NO, KC_NO, K0G, KC_NO, KC_NO, K0J, K0K, K0L, KC_NO, K0M,   K0N, KC_NO, K0P }  \
-}
-
 #define LAYOUT_75_ansi( \
     K5A, K5B, K5C, K5D, K5E, K5F, K5G, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, \
     K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N,      K4P, \

keyboards/dztech/dz60rgb/dz60rgb.c

@@ -416,19 +416,20 @@ led_config_t g_led_config = { {
     {  53,  52,  51,  50,  49,  48,  47,  46,  45,  44,  43,  42, NO_LED,  41 },
     {  62,  61,  60, NO_LED, NO_LED,  59, NO_LED, NO_LED,  58,  57,  56,  55, NO_LED,  54 }
 }, {
-    { 223,   0 }, { 206,   0 }, { 189,   0 }, { 172,   0 }, { 155,   0 }, { 137,   0 }, { 120,   0 }, { 103,   0 }, {  86,   0 }, {  68,   0 }, {  51,   0 }, {  34,   0 }, {  17,   0 }, {   0,   0 },
+    { 216,   0 }, { 192,   0 }, { 176,   0 }, { 160,   0 }, { 144,   0 }, { 128,   0 }, { 112,   0 }, {  96,   0 }, {  80,   0 }, {  64,   0 }, {  48,   0 }, {  32,   0 }, {  16,   0 }, {   0,   0 },
-    { 223,  16 }, { 206,  16 }, { 189,  16 }, { 172,  16 }, { 155,  16 }, { 137,  16 }, { 120,  16 }, { 103,  16 }, {  86,  16 }, {  68,  16 }, {  51,  16 }, {  34,  16 }, {  17,  16 }, {   0,  16 },
+    { 220,  16 }, { 200,  16 }, { 184,  16 }, { 168,  16 }, { 152,  16 }, { 136,  16 }, { 120,  16 }, { 104,  16 }, {  88,  16 }, {  72,  16 }, {  56,  16 }, {  40,  16 }, {  24,  16 }, {   4,  16 },
-    { 223,  32 }, { 189,  32 }, { 172,  32 }, { 155,  32 }, { 137,  32 }, { 120,  32 }, { 103,  32 }, {  86,  32 }, {  68,  32 }, {  51,  32 }, {  34,  32 }, {  17,  32 }, {   0,  32 }, { 223,  48 },
+    { 214,  32 }, { 188,  32 }, { 172,  32 }, { 156,  32 }, { 140,  32 }, { 124,  32 }, { 108,  32 }, {  92,  32 }, {  76,  32 }, {  60,  32 }, {  44,  32 }, {  28,  32 }, {   6,  32 }, { 224,  48 },
-    { 189,  48 }, { 172,  48 }, { 155,  48 }, { 137,  48 }, { 120,  48 }, { 103,  48 }, {  86,  48 }, {  68,  48 }, {  51,  48 }, {  34,  48 }, {  17,  48 }, {   0,  48 }, { 223,  64 }, { 189,  64 },
+    { 208,  48 }, { 186,  48 }, { 164,  48 }, { 148,  48 }, { 132,  48 }, { 116,  48 }, { 100,  48 }, {  84,  48 }, {  68,  48 }, {  52,  48 }, {  36,  48 }, {   9,  48 }, { 224,  64 }, { 208,  64 },
-    { 172,  64 }, { 155,  64 }, { 137,  64 }, {  86,  64 }, {  34,  64 }, {  17,  64 }, {   0,  64 }
+    { 192,  64 }, { 176,  64 }, { 160,  64 }, { 102,  64 }, {  42,  64 }, {  22,  64 }, {   2,  64 }
 }, {
-    1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
     1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
     1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1,
-    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1,
+    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1,
     1, 1, 1, 4, 1, 1, 1
 } };
 
+
 #endif
 
 void matrix_init_kb(void) {

keyboards/exclusive/e6v2/le_bmc/config.h

@@ -0,0 +1,49 @@
+/*
+Copyright 2019 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    exclusive
+#define PRODUCT         e6v2 le bmc
+#define DESCRIPTION     A custom 60% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 11
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+
+//                        0   1   2   3   4   5   6   7   8   9   A
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, C2, C3, C4, C5, D7 }
+#define DIODE_DIRECTION COL2ROW
+
+#define RGBLED_NUM 6
+#define RGBLIGHT_ANIMATIONS

keyboards/exclusive/e6v2/le_bmc/info.json

@@ -0,0 +1,24 @@
+{
+    "keyboard_name": "", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.26}, {"x":10.0, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_60_ansi": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_60_hhkb": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
+        },
+
+        "LAYOUT_60_tsangan": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}]
+        }
+    }
+}

keyboards/exclusive/e6v2/le_bmc/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/exclusive/e6v2/le_bmc/keymaps/default/keymap.c

@@ -0,0 +1,74 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_60_ansi(
+        KC_GESC, KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+        KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                          KC_RALT, KC_RGUI, KC_RCTL, MO(1)
+    ),
+
+[1] = LAYOUT_60_ansi(
+       KC_GRV,  KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  \
+	     BL_TOGG, BL_INC,   BL_DEC,  BL_STEP, RESET,   EEP_RST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+       RGB_TOG, RGB_MOD,  RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
+       KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS,                   \
+       KC_TRNS, KC_TRNS,  KC_TRNS,       KC_TRNS,                               KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/exclusive/e6v2/le_bmc/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for bmc

keyboards/exclusive/e6v2/le_bmc/le_bmc.c

@@ -0,0 +1,88 @@
+/* Copyright 2018 amnesia0287
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rgblight.h"
+#include "i2c_master.h"
+#include "quantum.h"
+
+#ifdef RGBLIGHT_ENABLE
+extern rgblight_config_t rgblight_config;
+
+void rgblight_set(void) {
+    if (!rgblight_config.enable) {
+        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+            led[i].r = 0;
+            led[i].g = 0;
+            led[i].b = 0;
+        }
+    }
+
+    i2c_init();
+    i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+}
+#endif
+
+void matrix_init_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+    if (rgblight_config.enable) {
+        i2c_init();
+        i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
+    }
+#endif
+    // call user level keymaps, if any
+    matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+#ifdef RGBLIGHT_ENABLE
+    rgblight_task();
+#endif
+    matrix_scan_user();
+    /* Nothing else for now. */
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void backlight_init_ports(void) {
+    // initialize pins D0, D1, D4 and D6 as output
+    setPinOutput(D0);
+    setPinOutput(D1);
+    setPinOutput(D4);
+    setPinOutput(D6);
+
+    // turn backlight LEDs on
+    writePinHigh(D0);
+    writePinHigh(D1);
+    writePinHigh(D4);
+    writePinHigh(D6);
+}
+
+void backlight_set(uint8_t level) {
+	if (level == 0) {
+        // turn backlight LEDs off
+        writePinLow(D0);
+        writePinLow(D1);
+        writePinLow(D4);
+        writePinLow(D6);
+	} else {
+        // turn backlight LEDs on
+        writePinHigh(D0);
+        writePinHigh(D1);
+        writePinHigh(D4);
+        writePinHigh(D6);
+	}
+}

keyboards/exclusive/e6v2/le_bmc/le_bmc.h

@@ -0,0 +1,103 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+// LAYOUT_all ignores the key often coded as ~# to the left of Enter on ISO layouts. 
+// This is done as it shares the same row AND col as the pipe key. 
+
+#define LAYOUT_all( \
+    k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k52, k4A, \
+    k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36,      \
+    k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26,           \
+    k10, k53, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, k54,      \
+    k00, k01, k02, k65, k04, k08, k09, k05                                     \
+) \
+{ \
+    { k00,   k01,   k02,   KC_NO, k04, k05,   KC_NO, KC_NO, k08,   k09,   KC_NO }, \
+    { k10,   k11,   k12,   k13,   k14, k15,   KC_NO, KC_NO, k18,   k19,   KC_NO }, \
+    { k20,   k21,   k22,   k23,   k24, k25,   k26,   KC_NO, k28,   k29,   KC_NO }, \
+    { k30,   k31,   k32,   k33,   k34, k35,   k36,   k37,   k38,   k39,   KC_NO }, \
+    { KC_NO, k41,   k42,   k43,   k44, k45,   KC_NO, k47,   k48,   k49,   k4A   }, \
+    { k50,   KC_NO, k52,   k53,   k54, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, k61,   k62,   k63,   k64, k65,   k66,   k67,   k68,   KC_NO, k6A   }, \
+    { KC_NO, k71,   k72,   k73,   k74, KC_NO, k76,   k77,   k78,   KC_NO, k7A   }, \
+}
+
+
+#define LAYOUT_60_ansi( \
+    k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k4A, \
+    k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36, \
+    k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26,      \
+    k10, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18,           \
+    k00, k01, k02, k65, k04, k08, k09, k05                                \
+) \
+{ \
+    { k00,   k01,   k02,   KC_NO, k04,   k05,   KC_NO, KC_NO, k08,   k09,   KC_NO }, \
+    { k10,   k11,   k12,   k13,   k14,   k15,   KC_NO, KC_NO, k18,   k19,   KC_NO }, \
+    { k20,   k21,   k22,   k23,   k24,   k25,   k26,   KC_NO, k28,   k29,   KC_NO }, \
+    { k30,   k31,   k32,   k33,   k34,   k35,   k36,   k37,   k38,   k39,   KC_NO }, \
+    { KC_NO, k41,   k42,   k43,   k44,   k45,   KC_NO, k47,   k48,   k49,   k4A   }, \
+    { k50,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, k61,   k62,   k63,   k64,   k65,   k66,   k67,   k68,   KC_NO, k6A   }, \
+    { KC_NO, k71,   k72,   k73,   k74,   KC_NO, k76,   k77,   k78,   KC_NO, k7A   }, \
+}
+
+#define LAYOUT_60_hhkb( \
+    k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k52, k4A, \
+    k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36,      \
+    k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26,           \
+    k10, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, k54,           \
+    k01, k02, k65, k08, k09                                                    \
+) \
+{ \
+    { KC_NO, k01,   k02,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k08,   k09,   KC_NO }, \
+    { k10,   k11,   k12,   k13,   k14,   k15,   KC_NO, KC_NO, k18,   k19,   KC_NO }, \
+    { k20,   k21,   k22,   k23,   k24,   k25,   k26,   KC_NO, k28,   k29,   KC_NO }, \
+    { k30,   k31,   k32,   k33,   k34,   k35,   k36,   k37,   k38,   k39,   KC_NO }, \
+    { KC_NO, k41,   k42,   k43,   k44,   k45,   KC_NO, k47,   k48,   k49,   k4A   }, \
+    { k50,   KC_NO, k52,   KC_NO, k54,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, k61,   k62,   k63,   k64,   k65,   k66,   k67,   k68,   KC_NO, k6A   }, \
+    { KC_NO, k71,   k72,   k73,   k74,   KC_NO, k76,   k77,   k78,   KC_NO, k7A   }, \
+}
+
+#define LAYOUT_60_tsangan( \
+    k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k52, k4A, \
+    k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36,      \
+    k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26,           \
+    k10, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, k54,           \
+    k00, k01, k02, k65, k08, k09, k05                                          \
+) \
+{ \
+    { k00,   k01,   k02,   KC_NO, KC_NO, k05,   KC_NO, KC_NO, k08,   k09,   KC_NO }, \
+    { k10,   k11,   k12,   k13,   k14,   k15,   KC_NO, KC_NO, k18,   k19,   KC_NO }, \
+    { k20,   k21,   k22,   k23,   k24,   k25,   k26,   KC_NO, k28,   k29,   KC_NO }, \
+    { k30,   k31,   k32,   k33,   k34,   k35,   k36,   k37,   k38,   k39,   KC_NO }, \
+    { KC_NO, k41,   k42,   k43,   k44,   k45,   KC_NO, k47,   k48,   k49,   k4A   }, \
+    { k50,   KC_NO, k52,   KC_NO, k54,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, k61,   k62,   k63,   k64,   k65,   k66,   k67,   k68,   KC_NO, k6A   }, \
+    { KC_NO, k71,   k72,   k73,   k74,   KC_NO, k76,   k77,   k78,   KC_NO, k7A   }, \
+}

keyboards/exclusive/e6v2/le_bmc/readme.md

@@ -0,0 +1,44 @@
+# E6-V2 Bootmapper Client (ps2avrgb) LE
+
+These docs are for the BMC version of the E6-V2 PCB sold during Round 2 which has an atmega32a microcontroller. Please do not flash this `.hex` file on your atmega32u4 equipped E6-V2 or your E6V2 BMC from Round 1. 
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: ps2avrgb E6-V2 with atmega32a microcontroller  
+Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make exclusive/e6v2/le_bmc:default
+
+Flashing
+
+ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. 
+
+**Reset Key:**  Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. 
+
+Windows: 
+1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
+2. Place your keyboard into reset. 
+3. Press the `Find Device` button and ensure that your keyboard is found.
+4. Press the `Open .hex File` button and locate the `.hex` file you created.
+5. Press the `Flash Device` button and wait for the process to complete. 
+
+macOS:
+1. Install homebrew by typing the following:   
+    ```
+    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
+    ```
+2. Install `crosspack-avr`.  
+    ```
+    brew cask install crosspack-avr
+    ```
+3. Install the following packages:
+    ```
+    brew install python3
+    pip3 install pyusb
+    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+    ```
+4. Place your keyboard into reset. 
+5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/exclusive/e6v2/le_bmc/rules.mk

@@ -0,0 +1,89 @@
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 12000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+# ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+# F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = bootloadHID
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_CUSTOM_DRIVER = yes
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+SRC += i2c_master.c
+
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/exclusive/e6v2/le_bmc/usbconfig.h

@@ -0,0 +1,393 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#pragma once
+
+#include "config.h"
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME      D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT      3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT       2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ       (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC       0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME   D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT          4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT    1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3   1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER              3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN           USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT          0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE      0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL      1
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED         0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER           500
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE      1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ       0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT   0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL        0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE       0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS          0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len)     if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK()              hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF                   1
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ *     in      YL, TCNT0
+ *     sts     timer0Snapshot, YL
+ *     endm
+ * #endif
+ * #define USB_SOF_HOOK                    myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING     0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC                0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID       (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID       (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc.  Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION  0x00, 0x02
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME     'E', 'x', 'c', 'l', 'u', 's', 'i', 'v', 'e'
+#define USB_CFG_VENDOR_NAME_LEN 9
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME     'E', '6', 'V', '2'
+#define USB_CFG_DEVICE_NAME_LEN 4
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER   'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN   0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS        0
+#define USB_CFG_DEVICE_SUBCLASS     0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS     3   /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS  1   /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL  1   /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH    0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ *   + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ *     at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ *     used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ *     you want RAM pointers.
+ *   + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ *     in static memory is in RAM, not in flash memory.
+ *   + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ *     the driver must know the descriptor's length. The descriptor itself is
+ *     found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ *   char usbDescriptorDevice[];
+ *   char usbDescriptorConfiguration[];
+ *   char usbDescriptorHidReport[];
+ *   char usbDescriptorString0[];
+ *   int usbDescriptorStringVendor[];
+ *   int usbDescriptorStringDevice[];
+ *   int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE   (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ *   USB_CFG_DESCR_PROPS_DEVICE
+ *   USB_CFG_DESCR_PROPS_CONFIGURATION
+ *   USB_CFG_DESCR_PROPS_STRINGS
+ *   USB_CFG_DESCR_PROPS_STRING_0
+ *   USB_CFG_DESCR_PROPS_STRING_VENDOR
+ *   USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ *   USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ *   USB_CFG_DESCR_PROPS_HID
+ *   USB_CFG_DESCR_PROPS_HID_REPORT
+ *   USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int  serialNumberDescriptor[] = {
+ *     USB_STRING_DESCRIPTOR_HEADER(6),
+ *     'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE                  0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION           USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION           0
+#define USB_CFG_DESCR_PROPS_STRINGS                 0
+#define USB_CFG_DESCR_PROPS_STRING_0                0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR           0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT          0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER    0
+#define USB_CFG_DESCR_PROPS_HID                     USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID                     0
+#define USB_CFG_DESCR_PROPS_HID_REPORT              USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT              0
+#define USB_CFG_DESCR_PROPS_UNKNOWN                 0
+
+#define usbMsgPtr_t unsigned short
+/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
+ * a scalar type here because gcc generates slightly shorter code for scalar
+ * arithmetics than for pointer arithmetics. Remove this define for backward
+ * type compatibility or define it to an 8 bit type if you use data in RAM only
+ * and all RAM is below 256 bytes (tiny memory model in IAR CC).
+ */
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG            MCUCR */
+/* #define USB_INTR_CFG_SET        ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         GIMSK */
+/* #define USB_INTR_ENABLE_BIT     INT0 */
+/* #define USB_INTR_PENDING        GIFR */
+/* #define USB_INTR_PENDING_BIT    INTF0 */
+/* #define USB_INTR_VECTOR         INT0_vect */
+
+/* Set INT1 for D- falling edge to count SOF */
+/* #define USB_INTR_CFG            EICRA */
+#define USB_INTR_CFG_SET        ((1 << ISC11) | (0 << ISC10))
+/* #define USB_INTR_CFG_CLR        0 */
+/* #define USB_INTR_ENABLE         EIMSK */
+#define USB_INTR_ENABLE_BIT     INT1
+/* #define USB_INTR_PENDING        EIFR */
+#define USB_INTR_PENDING_BIT    INTF1
+#define USB_INTR_VECTOR         INT1_vect

keyboards/georgi/config.h

@@ -30,6 +30,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define NO_ACTION_FUNCTION
 #define NO_ACTION_ONESHOT
 #define NO_ACTION_MACRO
+#define IGNORE_MOD_TAP_INTERRUPT
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED

keyboards/georgi/keymaps/default-flipped/keymap.c

@@ -0,0 +1,237 @@
+/*
+ * Good on you for modifying your layout, this is the most nonQMK layout you will come across
+ * There are three modes, Steno (the default), QWERTY (Toggleable) and a Momentary symbol layer
+ *
+ * Don't modify the steno layer directly, instead add chords using the keycodes and macros
+ * from sten.h to the layout you want to modify.
+ *
+ * Observe the comment above processQWERTY!
+ *
+ * http://docs.gboards.ca
+ */
+
+#include QMK_KEYBOARD_H
+#include "sten.h"
+#include "keymap_steno.h"
+
+// Proper Layers
+#define FUNCT   (LSD | LK | LP | LH)
+#define MEDIA   (LSD | LK | LW | LR)
+#define MOVE    (ST1 | ST2)
+
+// QMK Layers
+#define STENO_LAYER   0
+#define GAMING        1
+#define GAMING_2      2
+
+/* Keyboard Layout
+ * ,---------------------------------.    ,------------------------------.
+ * | FN  | LSU | LFT | LP | LH | ST1 |    | ST3 | RF | RP | RL | RT | RD |
+ * |-----+-----+-----+----+----|-----|    |-----|----+----+----+----+----|
+ * | PWR | LSD | LK  | LW | LR | ST2 |    | ST4 | RR | BB | RG | RS | RZ |
+ * `---------------------------------'    `------------------------------'
+ *                   ,---------------,    .---------------.
+ *                   | LNO | LA | LO |    | RE | RU | RNO |
+ *                   `---------------'    `---------------'
+ */
+
+// Note: You can only use basic keycodes here!
+// P() is just a wrapper to make your life easier.
+//
+// http://docs.gboards.ca
+uint32_t processQwerty(bool lookup) {
+    // Specials
+    P( RT  | RS  | RD  | RZ | LNO,        SEND_STRING(VERSION); SEND_STRING(__DATE__));
+    P( LNO | RNO | LA  | LO | RE | RU,    SEND(KC_MPLY));
+    P( LFT | LK  | LP  | LW,              REPEAT());
+    P( ST1 | ST2 | LW  | ST4,             SEND(KC_BSPC));
+
+    // Mouse Keys
+    P( LO  | LSD | LK,    CLICK_MOUSE(KC_MS_BTN2));
+    P( LO  | LR  | LW,    CLICK_MOUSE(KC_MS_BTN1));
+
+    // Thumb Chords
+    P( LA  | LO  | RE  | RU,    SEND(KC_CAPS));
+    P( LA  | RU,                SEND(KC_ESC));
+    P( LO  | RE,                SEND(KC_LCTL));
+    P( LNO | RNO | LA | RU,     SEND(KC_LCTL); SEND(KC_LSFT));
+    P( LNO | LA  | RE,          SEND(KC_LCTL); SEND(KC_LSFT); SEND(KC_LALT));
+
+    // Mods
+    P( RT | RD   | RS | RZ,    SEND(KC_LGUI));
+    P( RT | RD,                SEND(KC_LCTL));
+    P( RS | RZ,                SEND(KC_LALT));
+    P( LA | LNO,               SEND(KC_LCTL));
+    P( LA | LO,                SEND(KC_LALT));
+    P( LO,                     SEND(KC_LSFT));
+
+    // Function Layer
+    P( FUNCT | RF | RR,    SEND(KC_F5));
+    P( FUNCT | RP | RB,    SEND(KC_F6));
+    P( FUNCT | RL | RG,    SEND(KC_F7));
+    P( FUNCT | RT | RS,    SEND(KC_F8));
+    P( FUNCT | RF,         SEND(KC_F1));
+    P( FUNCT | RP,         SEND(KC_F2));
+    P( FUNCT | RL,         SEND(KC_F3));
+    P( FUNCT | RT,         SEND(KC_F4));
+    P( FUNCT | RR,         SEND(KC_F9));
+    P( FUNCT | RG,         SEND(KC_F10));
+    P( FUNCT | RB,         SEND(KC_F11));
+    P( FUNCT | RS,         SEND(KC_F12));
+
+    // Movement Layer
+    P( MOVE | RF,     SEND(KC_LEFT));
+    P( MOVE | RP,     SEND(KC_DOWN));
+    P( MOVE | RL,     SEND(KC_UP));
+    P( MOVE | RT,     SEND(KC_RIGHT));
+    P( MOVE | ST3,    SEND(KC_PGUP));
+    P( MOVE | ST4,    SEND(KC_PGDN));
+
+    // Media Layer
+    P( MEDIA | RF,    SEND(KC_MPRV));
+    P( MEDIA | RP,    SEND(KC_MPLY));
+    P( MEDIA | RL,    SEND(KC_MPLY));
+    P( MEDIA | RT,    SEND(KC_MNXT));
+    P( MEDIA | RD,    SEND(KC_VOLU));
+    P( MEDIA | RZ,    SEND(KC_VOLD));
+    P( MEDIA | RS,    SEND(KC_MUTE));
+
+    // Number Row, Left
+    P( LNO | LSU,    SEND(KC_1));
+    P( LNO | LFT,    SEND(KC_2));
+    P( LNO | LP,     SEND(KC_3));
+    P( LNO | LH,     SEND(KC_4));
+    P( LNO | ST1,    SEND(KC_5));
+    P( LNO | ST3,    SEND(KC_6));
+    P( LNO | RF,     SEND(KC_7));
+    P( LNO | RP,     SEND(KC_8));
+    P( LNO | RL,     SEND(KC_9));
+    P( LNO | RT,     SEND(KC_0));
+
+    // Number Row, Right
+    P( RNO | LSU,    SEND(KC_1));
+    P( RNO | LFT,    SEND(KC_2));
+    P( RNO | LP,     SEND(KC_3));
+    P( RNO | LH,     SEND(KC_4));
+    P( RNO | ST1,    SEND(KC_5));
+    P( RNO | ST3,    SEND(KC_6));
+    P( RNO | RF,     SEND(KC_7));
+    P( RNO | RP,     SEND(KC_8));
+    P( RNO | RL,     SEND(KC_9));
+    P( RNO | RT,     SEND(KC_0));
+    P( RNO | LA,     SEND(KC_5));
+
+    // Specials
+    P( RU | RNO,    SEND(KC_TAB));
+    P( RE | RU,     SEND(KC_BSPC));
+    P( RD | RZ,     SEND(KC_ENT));
+    P( RE,          SEND(KC_ENT));
+    P( RD,          SEND(KC_BSPC));
+    P( LNO,         SEND(KC_BSPC));
+    P( RNO,         SEND(KC_BSPC));
+    P( LA,          SEND(KC_SPC));
+    P( RU,          SEND(KC_SPC));
+    P( RZ,          SEND(KC_ESC));
+
+    // Symbols and Numbers
+    P( PWR | RE | RU,      SEND(KC_ENT));
+    P( PWR | LA | LO,      SEND(KC_SPC));
+    P( PWR | LP | LW,      SEND(KC_LSFT); SEND(KC_9));       // (
+    P( PWR | LH | LR,      SEND(KC_LSFT); SEND(KC_0));       // )
+    P( PWR | ST1 | ST2,    SEND(KC_GRV));                    // `
+    P( PWR | RD | RZ,      SEND(KC_ESC));
+    P( PWR | LSU | LSD,    SEND(KC_LSFT); SEND(KC_3));       // #
+    P( PWR | LFT | LK,     SEND(KC_LSFT); SEND(KC_4));       // $
+    P( PWR | LSU,          SEND(KC_LSFT); SEND(KC_1));       // !
+    P( PWR | LSD,          SEND(KC_LSFT); SEND(KC_5));       // %
+    P( PWR | LFT,          SEND(KC_LSFT); SEND(KC_2));       // @
+    P( PWR | LK,           SEND(KC_LSFT); SEND(KC_6));       // ^
+    P( PWR | LP,           SEND(KC_LSFT); SEND(KC_LBRC));    // {
+    P( PWR | LW,           SEND(KC_LBRC));
+    P( PWR | LH,           SEND(KC_LSFT); SEND(KC_RBRC));    // }
+    P( PWR | LR,           SEND(KC_RBRC));
+    P( PWR | ST1,          SEND(KC_LSFT); SEND(KC_BSLS));    // |
+    P( PWR | ST2,          SEND(KC_LSFT); SEND(KC_GRV));     // ~
+    P( PWR | ST3,          SEND(KC_QUOT));
+    P( PWR | ST4,          SEND(KC_LSFT); SEND(KC_QUOT));    // "
+    P( PWR | RF,           SEND(KC_KP_PLUS));
+    P( PWR | RR,           SEND(KC_LSFT); SEND(KC_7));       // &
+    P( PWR | RP,           SEND(KC_MINS));
+    P( PWR | RB,           SEND(KC_EQL));
+    P( PWR | RL,           SEND(KC_SLSH));
+    P( PWR | RG,           SEND(KC_COMM));
+    P( PWR | RT,           SEND(KC_PAST));
+    P( PWR | RS,           SEND(KC_DOT));
+    P( PWR | RD,           SEND(KC_TAB));
+    P( PWR | LA,           SEND(KC_LSFT));
+    P( PWR | LO,           SEND(KC_SLSH));
+    P( PWR | RE,           SEND(KC_SCLN));
+    P( PWR | RU,           SEND(KC_BSLS));
+    P( PWR | LNO,          SEND(KC_BSLS));
+
+    // Letters
+    P( LSU | LSD,    SEND(KC_A));
+    P( LFT | LK,     SEND(KC_S));
+    P( LP  | LW,     SEND(KC_D));
+    P( LH  | LR,     SEND(KC_F));
+    P( ST1 | ST2,    SEND(KC_G));
+    P( ST3 | ST4,    SEND(KC_H));
+    P( RF  | RR,     SEND(KC_J));
+    P( RT  | RS,     SEND(KC_SCLN));
+    P( RG  | RL,     SEND(KC_L));
+    P( RP  | RB,     SEND(KC_K));
+    P( LSU,          SEND(KC_Q));
+    P( LSD,          SEND(KC_Z));
+    P( LFT,          SEND(KC_W));
+    P( LK,           SEND(KC_X));
+    P( LP,           SEND(KC_E));
+    P( LW,           SEND(KC_C));
+    P( LH,           SEND(KC_R));
+    P( LR,           SEND(KC_V));
+    P( ST1,          SEND(KC_T));
+    P( ST2,          SEND(KC_B));
+    P( ST3,          SEND(KC_Y));
+    P( ST4,          SEND(KC_N));
+    P( RF,           SEND(KC_U));
+    P( RR,           SEND(KC_M));
+    P( RP,           SEND(KC_I));
+    P( RB,           SEND(KC_COMM));
+    P( RL,           SEND(KC_O));
+    P( RG,           SEND(KC_DOT));
+    P( RT,           SEND(KC_P));
+    P( RS,           SEND(KC_SLSH));
+    P( RNO,          SEND(KC_BSPC));
+    P( LNO,          SEND(KC_BSPC));
+
+    return 0;
+}
+
+// "Layers"
+// Steno layer should be first in your map.
+// When PWR | FN | ST3 | ST4 is pressed, the layer is increased to the next map. You must return to STENO_LAYER at the end.
+// If you need more space for chords, remove the two gaming layers.
+// Note: If using NO_ACTION_TAPPING, LT will not work!
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    // Main layer, everything goes through here
+    [STENO_LAYER] = LAYOUT_georgi(
+        STN_FN,  STN_S1,  STN_TL,  STN_PL,  STN_HL,  STN_ST1,       STN_ST3, STN_FR,  STN_PR,  STN_LR,  STN_TR,  STN_DR,
+        STN_PWR, STN_S2,  STN_KL,  STN_WL,  STN_RL,  STN_ST2,       STN_ST4, STN_RR,  STN_BR,  STN_GR,  STN_SR,  STN_ZR,
+                                   STN_A,   STN_O,   STN_N1,        STN_N7,  STN_E,   STN_U
+    ),
+    // Gaming layer with Numpad, Very limited
+    [GAMING] = LAYOUT_georgi(
+        KC_LSFT, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                       KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_ENT,
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                       KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_DQUO,
+                                   KC_LALT, KC_SPC,  LT(GAMING_2, KC_ENT),       KC_DEL,  KC_ASTR, TO(STENO_LAYER)
+    ),
+
+    [GAMING_2] = LAYOUT_georgi(
+        KC_LSFT, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,          KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS,
+        KC_LCTL, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,          KC_N,    KC_M,    KC_LT,   KC_GT,   KC_QUES, KC_RSFT,
+                                   KC_LALT, KC_SPC,  KC_ENT,        KC_DEL,  KC_ASTR, TO(STENO_LAYER)
+    )
+};
+
+// Don't fuck with this, thanks.
+size_t keymapsCount  = sizeof(keymaps)/sizeof(keymaps[0]);

keyboards/georgi/keymaps/default-flipped/readme.md

@@ -0,0 +1,11 @@
+# Georgi QWERTY/Steno firmware
+
+This is the default keymap for Georgi, it's based heavily off of the naps62 ErgoDox and the Gergo layout. 
+It is both a ergonomic and programmer friendly keymap.
+
+Ideally you should copy this directory and make your changes there. If you come up with a good layout submit a PR!
+
+## Space issues
+If you find yourself running out of space for dictionary entries, disabling mousekeys in rules.mk will save
+you about 4k for entries!
+Get a free 1k by deleting the Gaming layers from the keymap!

keyboards/georgi/keymaps/default-flipped/rules.mk

@@ -0,0 +1,41 @@
+#----------------------------------------------------------------------------
+# make georgi:default:dfu
+# Make sure you have dfu-programmer installed!
+#----------------------------------------------------------------------------
+
+NO_REPEAT				 = no
+VERBOSE					 = yes
+KEYBOARD_SHARED_EP       = yes
+CUSTOM_MATRIX			 = yes
+
+#Firmware reduction options
+MOUSEKEY_ENABLE			 = yes 		# 1500 bytes
+NO_TAPPING				 = no 	    # 2000 bytes
+NO_PRINT				 = yes		
+
+#Debug options
+CONSOLE_ENABLE			 = no
+DEBUG_MATRIX_SCAN_RATE   = no
+DEBUG_MATRIX			 = no
+ONLY_QWERTY				 = no
+
+# A bunch of stuff that you shouldn't touch unless you
+# know what you're doing.
+#
+# No touchy, capiche?
+SRC += matrix.c i2c_master.c
+ifeq ($(strip $(DEBUG_MATRIX)), yes)
+    OPT_DEFS += -DDEBUG_MATRIX
+endif
+ifeq ($(strip $(NO_REPEAT)), yes)
+    OPT_DEFS += -DNO_REPEAT
+endif
+ifeq ($(strip $(NO_PRINT)), yes)
+    OPT_DEFS += -DNO_PRINT -DNO_DEBUG
+endif
+ifeq ($(strip $(ONLY_QWERTY)), yes)
+    OPT_DEFS += -DONLYQWERTY
+endif
+ifeq ($(strip $(NO_TAPPING)), yes)
+    OPT_DEFS += -DNO_ACTION_TAPPING
+endif

keyboards/georgi/keymaps/default/keymap.c

@@ -13,7 +13,6 @@
 #include QMK_KEYBOARD_H
 #include "sten.h"
 #include "keymap_steno.h"
-#define IGNORE_MOD_TAP_INTERRUPT
 
 // Proper Layers
 #define FUNCT   (LSD | LK | LP | LH)

keyboards/georgi/keymaps/minimal/keymap.c

@@ -13,7 +13,6 @@
 #include QMK_KEYBOARD_H
 #include "sten.h"
 #include "keymap_steno.h"
-#define IGNORE_MOD_TAP_INTERRUPT
 
 // Proper Layers
 #define FUNCT   (LSD | LK | LP | LH)

keyboards/georgi/keymaps/norman/keymap.c

@@ -13,7 +13,6 @@
 #include QMK_KEYBOARD_H
 #include "sten.h"
 #include "keymap_steno.h"
-#define IGNORE_MOD_TAP_INTERRUPT
 
 // Proper Layers
 #define FUNCT   (LSD | LK | LP | LH)

keyboards/handwired/co60/info.json

@@ -0,0 +1,38 @@
+{
+  "keyboard_name": "CO60",
+  "url": "https://github.com/jmdaly/CO60",
+  "maintainer": "qmk",
+  "width": 15,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_all": {
+      "key_count": 68,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"LSpace", "x":3.75, "y":4, "w":2.25}, {"label":"Fn", "x":6, "y":4, "w":1.25}, {"label":"RSpace", "x":7.25, "y":4, "w":2.75}, {"label":"Alt", "x":10, "y":4, "w":1}, {"label":"Win", "x":11, "y":4, "w":1}, {"label":"Menu", "x":12, "y":4, "w":1}, {"label":"Ctrl", "x":13, "y":4, "w":1}, {"label":"Fn", "x":14, "y":4, "w":1}]
+    },
+    "LAYOUT_60_ansi": {
+      "key_count": 61,
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+    "LAYOUT_60_ansi_split_bs_rshift": {
+      "key_count": 63,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0, "w":1}, {"label":"Del", "x":14, "y":0, "w":1}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3, "w":1}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+    "LAYOUT_60_iso": {
+      "key_count": 62,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"£", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"@", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"AltGr", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+    },
+    "LAYOUT_60_hhkb": {
+      "key_count": 60,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75},{"label":"Fn", "x":14, "y":3}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"label":"Space", "x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}]
+    },
+    "LAYOUT_60_hhkb_split_space": {
+      "key_count": 62,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75},{"label":"Fn", "x":14, "y":3}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"label":"LSpace", "x":4, "y":4, "w":2.75}, {"label":"Fn", "x":6.75, "y":4, "w":1.5}, {"label":"RSpace", "x":8.25, "y":4, "w":2.75}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}]
+    },
+    "LAYOUT_60_hhkb_split_625u_space": {
+      "key_count": 63,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"Del", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75},{"label":"Fn", "x":14, "y":3}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"LSpace", "x":3.75, "y":4, "w":2.25}, {"label":"Fn", "x":6, "y":4, "w":1.25}, {"label":"RSpace", "x":7.25, "y":4, "w":2.75}, {"label":"Menu", "x":10, "y":4, "w":1.25}, {"label":"Alt", "x":11.25, "y":4, "w":1.25}, {"label":"Win", "x":12.5, "y":4}]
+    }
+  }
+}
+

keyboards/handwired/co60/keymaps/all_keys/config.h

@@ -0,0 +1,20 @@
+/* Copyright 2019 John M Daly <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+
+// place overrides here

keyboards/handwired/co60/keymaps/all_keys/keymap.c

@@ -0,0 +1,48 @@
+/* Copyright 2019 John M Daly <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+enum co60_layers {
+  _L1,
+  _L2
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_L1] = LAYOUT_all( /* Base */
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7, KC_8,    KC_9,    KC_0,    KC_MINS,    KC_EQL,  KC_GRV, KC_DEL,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC,    KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT,    KC_NUHS, KC_ENT,
+    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_LSFT,
+    KC_LCTL, KC_LGUI, KC_LALT,          KC_ENT,           KC_HOME, KC_END, KC_INS,         KC_RALT, KC_RGUI,    KC_RIGHT, KC_RCTL
+  )
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/handwired/co60/keymaps/all_keys/readme.md

@@ -0,0 +1,5 @@
+# Keymap that uses all possible switches
+
+This is in part to test all of the switches,
+but also it may be useful if anyone ever makes a
+layout that requires all switch positions.

keyboards/handwired/co60/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 John M Daly
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/handwired/co60/keymaps/default/keymap.c

@@ -0,0 +1,54 @@
+/* Copyright 2019 John M Daly <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum co60_layers {
+  _L1,
+  _L2
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_L1] = LAYOUT_60_ansi( /* Base */
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7, KC_8,    KC_9,    KC_0,    KC_MINS,    KC_EQL,  KC_BSPC,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC,    KC_RBRC, KC_BSLS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT,    KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                          KC_RALT, KC_RGUI,    MO(_L2), KC_RCTL
+  ),
+  [_L2] = LAYOUT_60_ansi( /* Base */
+    RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,     KC_F10,    KC_F11,     KC_F12,   KC_GRV,
+    _______, BL_TOGG, BL_INC,  _______, _______, _______, _______, _______, _______, _______,   _______,   KC_PGUP,    _______,  KC_INSERT,
+    _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT,  KC_HOME,   KC_END,     _______,
+    _______, BL_DEC,  _______, _______, _______, _______, _______, _______, _______, _______,   KC_PGDOWN, _______,
+    _______, _______, _______,                            _______,                              _______,   _______,    _______,  _______
+  )
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/handwired/co60/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for co60

keyboards/handwired/co60/keymaps/jmdaly_hhkb_split_space/config.h

@@ -0,0 +1,21 @@
+/* Copyright 2019 John M Daly <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define LEADER_TIMEOUT 300
+
+// place overrides here

keyboards/handwired/co60/keymaps/jmdaly_hhkb_split_space/keymap.c

@@ -0,0 +1,137 @@
+/* Copyright 2019 John M Daly <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum co60_layers {
+  _L1,
+  _L2,
+  _L3
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  // Default base layer. Except for the bottom row, this
+  // is close to a standard HHKB layout.
+  [_L1] = LAYOUT_60_hhkb_split_625u_space( /* Base */
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7, KC_8,    KC_9,    KC_0,    KC_MINS,    KC_EQL,  KC_BSLS, KC_GRV,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC,    KC_RBRC, KC_BSPC,
+    CTL_T(KC_ESC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT,    KC_ENT,
+    KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC, MO(_L3),
+             KC_LALT, KC_LGUI,       KC_ENT,              MO(_L3),       KC_SPC,  KC_LEAD, KC_RGUI, KC_RALT
+  ),
+  // My preferred base layout. This doesn't match the caps
+  // on my boards, so I don't make it default.
+  [_L2] = LAYOUT_60_hhkb_split_625u_space( /* Base */
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7, KC_8,    KC_9,    KC_0,    KC_MINS,    KC_EQL,  KC_BSLS, KC_DEL,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC,    KC_RBRC, KC_BSPC,
+    CTL_T(KC_ESC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT,    KC_ENT,
+    KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC, MO(_L3),
+             KC_LALT, KC_LGUI,       KC_ENT,              MO(_L3),       KC_SPC,  KC_LEAD, KC_RGUI, KC_RALT
+  ),
+  [_L3] = LAYOUT_60_hhkb_split_625u_space( /* Function */
+    RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,     KC_F10,    KC_F11,     KC_F12,   _______, _______,
+    BL_BRTG, BL_TOGG, BL_INC,  BL_DEC, BL_ON, BL_OFF, _______, _______, _______, _______,   _______,   KC_PGUP,    KC_INSERT,  KC_DEL,
+    _______, RGB_TOG, RGB_MOD, RGB_RMOD, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT,  KC_HOME,   KC_END,     _______,
+    _______, BL_DEC,  _______, _______, _______, _______, _______, DF(_L1), DF(_L2), _______,   KC_PGDOWN, _______, _______,
+             _______, _______,          _______,          _______,          _______, _______,   _______,   _______
+  )
+};
+
+void matrix_init_user(void) {
+
+}
+
+LEADER_EXTERNS();
+
+void matrix_scan_user(void) {
+
+  LEADER_DICTIONARY() {
+    leading = false;
+    leader_end();
+
+    // Close a program in i3wm
+    SEQ_ONE_KEY(KC_Q) {
+      register_code(KC_LGUI);
+      register_code(KC_LSHIFT);
+      register_code(KC_Q);
+      unregister_code(KC_Q);
+      unregister_code(KC_LSHIFT);
+      unregister_code(KC_LGUI);
+    }
+    // Exit i3wm
+    SEQ_ONE_KEY(KC_E) {
+      register_code(KC_LGUI);
+      register_code(KC_LSHIFT);
+      register_code(KC_E);
+      unregister_code(KC_E);
+      unregister_code(KC_LSHIFT);
+      unregister_code(KC_LGUI);
+    }
+    // Copy selected text in suckless terminal
+    SEQ_ONE_KEY(KC_C) {
+      register_code(KC_LCTL);
+      register_code(KC_LSHIFT);
+      register_code(KC_C);
+      unregister_code(KC_C);
+      unregister_code(KC_LSHIFT);
+      unregister_code(KC_LCTL);
+    }
+    // Paste text in suckless terminal
+    SEQ_ONE_KEY(KC_V) {
+      register_code(KC_LCTL);
+      register_code(KC_LSHIFT);
+      register_code(KC_V);
+      unregister_code(KC_V);
+      unregister_code(KC_LSHIFT);
+      unregister_code(KC_LCTL);
+    }
+    // FZF shortcut to fuzzy switch directories
+    SEQ_ONE_KEY(KC_D) {
+      register_code(KC_LALT);
+      register_code(KC_C);
+      unregister_code(KC_C);
+      unregister_code(KC_LALT);
+    }
+    // Send keys to bring up fuzzy process kill
+    SEQ_ONE_KEY(KC_K) {
+      SEND_STRING("kill " SS_TAP(X_TAB));
+    }
+    // Send keys to start neovim and fuzzy search for filename
+    SEQ_ONE_KEY(KC_T) {
+      SEND_STRING("nvim ");
+      register_code(KC_LCTL);
+      register_code(KC_T);
+      unregister_code(KC_T);
+      unregister_code(KC_LCTL);
+    }
+    // Switch between windows in tmux
+    SEQ_ONE_KEY(KC_L) {
+      register_code(KC_LCTL);
+      register_code(KC_B);
+      unregister_code(KC_B);
+      unregister_code(KC_LCTL);
+      register_code(KC_L);
+      unregister_code(KC_L);
+    }
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/handwired/co60/keymaps/jmdaly_hhkb_split_space/readme.md

@@ -0,0 +1,6 @@
+# The split-space HHKB keymap for co60
+
+This keymap implements a modified MX HHKB layout, but in addition to 7u space,
+this layout supports a number of split spacebar bottom rows. The full set of
+layout options is found
+[here](http://www.keyboard-layout-editor.com/#/gists/b488496b3a71c8192113c07e298be340).

keyboards/handwired/co60/readme.md

@@ -0,0 +1,26 @@
+# co60
+
+The CO60 is a 60% PCB that aims to meet the following goals:
+
+* Switches oriented such that the LEDs are South-facing, for
+  compatibility with Cherry profile keycaps.
+* USB Type-C support in both A to C and C to C configurations.
+* QMK support.
+* A variety of split spacebar configurations, including split 6.25U
+  space and split 7U space.
+* ESD protection circuitry, including data line protection and a
+  polyfuse on the VCC line.
+* Support for per-switch LED backlighting.
+* Fits in standard 60% keyboard cases.
+
+More info on the project, including all of the design files, can be found [here](https://github.com/jmdaly/CO60).
+
+Keyboard Maintainer: [jmdaly](https://github.com/jmdaly)  
+Hardware Supported: Supports the CO60 PCB rev1, rev6, rev7  
+Hardware Availability: Through group buys.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/co60/rev7:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/co60/rev1/config.h

@@ -0,0 +1,161 @@
+/*
+Copyright 2018 John M Daly <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    John M Daly
+#define PRODUCT         CO60
+#define DESCRIPTION     An open hardware sixty percent PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B2, B5, B4, D7, D6, B3, B0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#ifdef __AVR__
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#endif
+#define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+// #define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION

keyboards/handwired/co60/rev1/rev1.c

@@ -0,0 +1,46 @@
+/* Copyright 2018 John M Daly
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rev1.h"
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+__attribute__ ((weak))
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/handwired/co60/rev1/rev1.h

@@ -0,0 +1,127 @@
+/* Copyright 2018 John M Daly
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is a layout that uses all available switch positions.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+    K400, K401, K402,       K404,       K406,       K408,       K410, K411, K412, K413, K414 \
+) \
+{ \
+    { K000, K001,   K002, K003,  K004, K005,  K006, K007,  K008, K009,  K010, K011, K012,  K013, K014 }, \
+    { K100, KC_NO,  K102, K103,  K104, K105,  K106, K107,  K108, K109,  K110, K111, K112,  K113, K114 }, \
+    { K200, KC_NO,  K202, K203,  K204, K205,  K206, K207,  K208, K209,  K210, K211, K212,  K213, K214 }, \
+    { K300, K301,   K302, K303,  K304, K305,  K306, K307,  K308, K309,  K310, K311, KC_NO, K313, K314 }, \
+    { K400, K401,   K402, KC_NO, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412,  K413, K414 }, \
+}
+
+#define LAYOUT_60_ansi( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,       \
+    K400, K401, K402,                   K406,                   K410, K411,       K413, K414 \
+) \
+{ \
+    { K000, K001,  K002, K003,  K004,  K005,  K006, K007,  K008, K009,   K010, K011, K012,  KC_NO,  K014 }, \
+    { K100, KC_NO, K102, K103,  K104,  K105,  K106, K107,  K108, K109,   K110, K111, K112,  K113,   K114 }, \
+    { K200, KC_NO, K202, K203,  K204,  K205,  K206, K207,  K208, K209,   K210, K211, K212,  KC_NO,  K214 }, \
+    { K300, KC_NO, K302, K303,  K304,  K305,  K306, K307,  K308, K309,   K310, K311, KC_NO, K313,   KC_NO }, \
+    { K400, K401,  K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, K413,   K414 }, \
+}
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+    K400, K401, K402,                   K406,                   K410, K411,       K413, K414 \
+) \
+{ \
+    { K000, K001,  K002, K003,  K004,  K005,  K006, K007,  K008, K009,   K010, K011, K012,  K013,   K014 }, \
+    { K100, KC_NO, K102, K103,  K104,  K105,  K106, K107,  K108, K109,   K110, K111, K112,  K113,   K114 }, \
+    { K200, KC_NO, K202, K203,  K204,  K205,  K206, K207,  K208, K209,   K210, K211, K212,  KC_NO,  K214 }, \
+    { K300, KC_NO, K302, K303,  K304,  K305,  K306, K307,  K308, K309,   K310, K311, KC_NO, K313,   K314 }, \
+    { K400, K401,  K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, K413,   K414 }, \
+}
+
+#define LAYOUT_60_iso( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,       \
+    K400, K401, K402,                   K406,                   K410, K411,       K413, K414 \
+) \
+{ \
+    { K000, K001,  K002, K003,  K004,  K005,  K006, K007,  K008,  K009,  K010, K011, K012,  KC_NO, K014 }, \
+    { K100, KC_NO, K102, K103,  K104,  K105,  K106, K107,  K108,  K109,  K110, K111, K112,  K113,  KC_NO }, \
+    { K200, KC_NO, K202, K203,  K204,  K205,  K206, K207,  K208,  K209,  K210, K211, K212,  K213,  K214 }, \
+    { K300, K301,  K302, K303,  K304,  K305,  K306, K307,  K308,  K309,  K310, K311, KC_NO, K313,  KC_NO }, \
+    { K400, K401,  K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, K413,  K414 }, \
+}
+
+#define LAYOUT_60_hhkb( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+          K401, K402,                   K406,                         K411,       K413      \
+) \
+{ \
+    { K000,  K001,   K002, K003,  K004,  K005,  K006, K007,  K008,  K009,  K010, K011, K012,  K013,  K014 }, \
+    { K100,  KC_NO,  K102, K103,  K104,  K105,  K106, K107,  K108,  K109,  K110, K111, K112,  K113,  K114 }, \
+    { K200,  KC_NO,  K202, K203,  K204,  K205,  K206, K207,  K208,  K209,  K210, K211, K212,  KC_NO, K214 }, \
+    { K300,  KC_NO,  K302, K303,  K304,  K305,  K306, K307,  K308,  K309,  K310, K311, KC_NO, K313,  K314 }, \
+    { KC_NO, K401,   K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, KC_NO, K411, KC_NO, K413, KC_NO }, \
+}
+
+#define LAYOUT_60_hhkb_split_space( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+          K401, K402,       K404,       K406,       K408,             K411,       K413      \
+) \
+{ \
+    { K000,  K001,   K002, K003,  K004, K005,  K006, K007,  K008, K009,  K010, K011, K012,  K013,  K014 }, \
+    { K100,  KC_NO,  K102, K103,  K104, K105,  K106, K107,  K108, K109,  K110, K111, K112,  K113,  K114 }, \
+    { K200,  KC_NO,  K202, K203,  K204, K205,  K206, K207,  K208, K209,  K210, K211, K212,  KC_NO, K214 }, \
+    { K300,  KC_NO,  K302, K303,  K304, K305,  K306, K307,  K308, K309,  K310, K311, KC_NO, K313,  K314 }, \
+    { KC_NO, K401,   K402, KC_NO, K404, KC_NO, K406, KC_NO, K408, KC_NO, KC_NO, K411, KC_NO, K413, KC_NO }, \
+}
+
+#define LAYOUT_60_hhkb_split_625u_space( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+          K401, K402,       K404,       K406,       K408,       K410, K411,       K413      \
+) \
+{ \
+    { K000,  K001,   K002, K003,  K004, K005,  K006, K007,  K008, K009,  K010, K011, K012,  K013,  K014 }, \
+    { K100,  KC_NO,  K102, K103,  K104, K105,  K106, K107,  K108, K109,  K110, K111, K112,  K113,  K114 }, \
+    { K200,  KC_NO,  K202, K203,  K204, K205,  K206, K207,  K208, K209,  K210, K211, K212,  KC_NO, K214 }, \
+    { K300,  KC_NO,  K302, K303,  K304, K305,  K306, K307,  K308, K309,  K310, K311, KC_NO, K313,  K314 }, \
+    { KC_NO, K401,   K402, KC_NO, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, KC_NO, K413, KC_NO }, \
+}

keyboards/handwired/co60/rev1/rules.mk

@@ -0,0 +1,70 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+LEADER_ENABLE = yes         # Turn on leader support
+
+# Layouts supported by this PCB:
+LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift 60_hhkb

keyboards/handwired/co60/rev6/chconf.h

@@ -0,0 +1,520 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        TRUE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/handwired/co60/rev6/config.h

@@ -0,0 +1,60 @@
+/*
+ * Copyright 2019 John M Daly <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    John M Daly
+#define PRODUCT         CO60 rev6
+#define DESCRIPTION     An open hardware sixty percent PCB
+
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* ROWS: Top to bottom, COLS: Left to right
+*/
+#define MATRIX_ROW_PINS { B0, B1, B2, A15, A10 }
+#define MATRIX_COL_PINS { A2, A3, A6, B14, B15, A8, A9, A7, B3, B4, C14, C15, C13, B5, B6 }
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Backlight configuration
+ * Backlight LEDs on B8
+ */
+#define BACKLIGHT_LEVELS 24
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6

keyboards/handwired/co60/rev6/halconf.h

@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI                FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/handwired/co60/rev6/led.c

@@ -0,0 +1,240 @@
+/*
+Copyright 2012 Jun Wako <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "hal.h"
+#include "led_custom.h"
+#include "rev6.h"
+#include "printf.h"
+
+static void breathing_callback(PWMDriver *pwmp);
+
+static PWMConfig pwmCFG = {
+  0xFFFF,                              /* PWM clock frequency  */
+  256,                                 /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
+  NULL,                                /* No Callback */
+  {
+      {PWM_OUTPUT_DISABLED, NULL},
+      {PWM_OUTPUT_DISABLED, NULL},
+      {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 3 */
+      {PWM_OUTPUT_DISABLED, NULL}
+  },
+  0,                                  /* HW dependent part.*/
+  0
+};
+
+static PWMConfig pwmCFG_breathing = {
+  0xFFFF,                              /* 10kHz PWM clock frequency  */
+  256,                                 /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
+  breathing_callback,                  /* Breathing Callback */
+  {
+      {PWM_OUTPUT_DISABLED, NULL},
+      {PWM_OUTPUT_DISABLED, NULL},
+      {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 3 */
+      {PWM_OUTPUT_DISABLED, NULL}
+  },
+  0,                                  /* HW dependent part.*/
+  0
+};
+
+// See http://jared.geek.nz/2013/feb/linear-led-pwm
+static uint16_t cie_lightness(uint16_t v) {
+  if (v <= 5243)   // if below 8% of max
+    return v / 9;  // same as dividing by 900%
+  else {
+    uint32_t y = (((uint32_t)v + 10486) << 8) / (10486 + 0xFFFFUL);  // add 16% of max and compare
+    // to get a useful result with integer division, we shift left in the expression above
+    // and revert what we've done again after squaring.
+    y = y * y * y >> 8;
+    if (y > 0xFFFFUL)  // prevent overflow
+      return 0xFFFFU;
+    else
+      return (uint16_t)y;
+  }
+}
+
+void backlight_init_ports(void) {
+  palSetPadMode(GPIOB, 8, PAL_MODE_ALTERNATE(2));
+  pwmStart(&PWMD4, &pwmCFG);
+  if (kb_backlight_config.enable) {
+    if (kb_backlight_config.breathing) {
+      breathing_enable();
+    } else {
+      backlight_set(kb_backlight_config.level);
+    }
+  } else {
+    backlight_set(0);
+  }
+}
+
+void backlight_set(uint8_t level) {
+  uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t)level / BACKLIGHT_LEVELS));
+  if (level == 0) {
+    // Turn backlight off
+    // Disable channel 3 on PWM4
+    pwmDisableChannel(&PWMD4, 2);
+  } else {
+    // Turn backlight on
+    if (!is_breathing()) {
+      // Enable channel 3 on PWM4
+      pwmEnableChannel(&PWMD4, 2, PWM_FRACTION_TO_WIDTH(&PWMD4, 0xFFFF, duty));
+    }
+  }
+}
+
+uint8_t backlight_tick = 0;
+
+void backlight_task(void) {
+}
+
+#define BREATHING_NO_HALT  0
+#define BREATHING_HALT_OFF 1
+#define BREATHING_HALT_ON  2
+#define BREATHING_STEPS 128
+
+static uint8_t breathing_period = BREATHING_PERIOD;
+static uint8_t breathing_halt = BREATHING_NO_HALT;
+static uint16_t breathing_counter = 0;
+
+bool is_breathing(void) {
+    return PWMD4.config == &pwmCFG_breathing;
+}
+
+#define breathing_min() do {breathing_counter = 0;} while (0)
+#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0)
+
+
+void breathing_interrupt_enable(void){
+    pwmStop(&PWMD4);
+    pwmStart(&PWMD4, &pwmCFG_breathing);
+    chSysLockFromISR();
+    pwmEnablePeriodicNotification(&PWMD4);
+    pwmEnableChannelI(
+      &PWMD4,
+      2,
+      PWM_FRACTION_TO_WIDTH(
+        &PWMD4,
+        0xFFFF,
+        0xFFFF
+      )
+    );
+    chSysUnlockFromISR();
+}
+
+void breathing_interrupt_disable(void){
+    pwmStop(&PWMD4);
+    pwmStart(&PWMD4, &pwmCFG);
+}
+
+void breathing_enable(void)
+{
+  breathing_counter = 0;
+  breathing_halt = BREATHING_NO_HALT;
+  breathing_interrupt_enable();
+}
+
+void breathing_pulse(void)
+{
+    if (kb_backlight_config.level == 0)
+      breathing_min();
+    else
+      breathing_max();
+    breathing_halt = BREATHING_HALT_ON;
+    breathing_interrupt_enable();
+}
+
+void breathing_disable(void)
+{
+    breathing_interrupt_disable();
+    // Restore backlight level
+    backlight_set(kb_backlight_config.level);
+}
+
+void breathing_self_disable(void)
+{
+  if (kb_backlight_config.level == 0)
+    breathing_halt = BREATHING_HALT_OFF;
+  else
+    breathing_halt = BREATHING_HALT_ON;
+}
+
+void breathing_toggle(void) {
+  if (is_breathing()){
+    breathing_disable();
+  } else {
+    breathing_enable();
+  }
+}
+
+void breathing_period_set(uint8_t value)
+{
+  if (!value)
+    value = 1;
+  breathing_period = value;
+}
+
+void breathing_period_default(void) {
+  breathing_period_set(BREATHING_PERIOD);
+}
+
+void breathing_period_inc(void)
+{
+  breathing_period_set(breathing_period+1);
+}
+
+void breathing_period_dec(void)
+{
+  breathing_period_set(breathing_period-1);
+}
+
+/* To generate breathing curve in python:
+ * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
+ */
+static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+// Use this before the cie_lightness function.
+static inline uint16_t scale_backlight(uint16_t v) {
+  return v / BACKLIGHT_LEVELS * kb_backlight_config.level;
+}
+
+static void breathing_callback(PWMDriver *pwmp)
+{
+  (void)pwmp;
+  uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS;
+  // resetting after one period to prevent ugly reset at overflow.
+  breathing_counter = (breathing_counter + 1) % (breathing_period * 256);
+  uint8_t index = breathing_counter / interval % BREATHING_STEPS;
+
+  if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
+      ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
+  {
+      breathing_interrupt_disable();
+  }
+
+  uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256));
+
+  chSysLockFromISR();
+  pwmEnableChannelI(
+    &PWMD4,
+    2,
+    PWM_FRACTION_TO_WIDTH(
+      &PWMD4,
+      0xFFFF,
+      duty
+    )
+  );
+  chSysUnlockFromISR();
+}

keyboards/handwired/co60/rev6/led_custom.h

@@ -0,0 +1,22 @@
+/*
+ * Copyright 2019 John M Daly <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+void backlight_task(void);
+void breathing_interrupt_disable(void);
+void breathing_interrupt_enable(void);

keyboards/handwired/co60/rev6/mcuconf.h

@@ -0,0 +1,257 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_UART4SW                       STM32_UART4SW_PCLK
+#define STM32_UART5SW                       STM32_UART5SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+#undef STM32_HSE_BYPASS
+// #error "oh no"
+// #endif
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_USE_ADC4                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC4_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC4_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  TRUE
+#define STM32_GPT_USE_TIM7                  TRUE
+#define STM32_GPT_USE_TIM8                  TRUE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  TRUE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* MCUCONF_H */

keyboards/handwired/co60/rev6/rev6.c

@@ -0,0 +1,39 @@
+/* Copyright 2019 John M Daly <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rev6.h"
+
+#include "backlight.h"
+#include "led.h"
+#include "printf.h"
+
+backlight_levels_config_t kb_backlight_config = {
+  .enable = true,
+  .breathing = true,
+  .level = BACKLIGHT_LEVELS
+};
+
+uint8_t *o_fb;
+
+uint16_t counterst = 0;
+
+void matrix_init_kb(void) {
+	matrix_init_user();
+        backlight_init_ports();
+}
+
+void matrix_scan_kb(void) {
+	matrix_scan_user();
+}

keyboards/handwired/co60/rev6/rev6.h

@@ -0,0 +1,146 @@
+/* Copyright 2019 John M Daly <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is a layout that uses all available switch positions.
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_all( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+    K400, K401, K402,       K404,       K406,       K408,       K410, K411, K412, K413, K414 \
+) \
+{ \
+    { K000, K001,   K002, K003,  K004, K005,  K006, K007,  K008, K009,  K010, K011, K012,  K013, K014 }, \
+    { K100, KC_NO,  K102, K103,  K104, K105,  K106, K107,  K108, K109,  K110, K111, K112,  K113, K114 }, \
+    { K200, KC_NO,  K202, K203,  K204, K205,  K206, K207,  K208, K209,  K210, K211, K212,  K213, K214 }, \
+    { K300, K301,   K302, K303,  K304, K305,  K306, K307,  K308, K309,  K310, K311, KC_NO, K313, K314 }, \
+    { K400, K401,   K402, KC_NO, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412,  K413, K414 }, \
+}
+
+#define LAYOUT_60_ansi( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,       \
+    K400, K401, K402,                   K406,                   K410, K411,       K413, K414 \
+) \
+{ \
+    { K000, K001,  K002, K003,  K004,  K005,  K006, K007,  K008, K009,   K010, K011, K012,  KC_NO,  K014 }, \
+    { K100, KC_NO, K102, K103,  K104,  K105,  K106, K107,  K108, K109,   K110, K111, K112,  K113,   K114 }, \
+    { K200, KC_NO, K202, K203,  K204,  K205,  K206, K207,  K208, K209,   K210, K211, K212,  KC_NO,  K214 }, \
+    { K300, KC_NO, K302, K303,  K304,  K305,  K306, K307,  K308, K309,   K310, K311, KC_NO, K313,   KC_NO }, \
+    { K400, K401,  K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, K413,   K414 }, \
+}
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+    K400, K401, K402,                   K406,                   K410, K411,       K413, K414 \
+) \
+{ \
+    { K000, K001,  K002, K003,  K004,  K005,  K006, K007,  K008, K009,   K010, K011, K012,  K013,   K014 }, \
+    { K100, KC_NO, K102, K103,  K104,  K105,  K106, K107,  K108, K109,   K110, K111, K112,  K113,   K114 }, \
+    { K200, KC_NO, K202, K203,  K204,  K205,  K206, K207,  K208, K209,   K210, K211, K212,  KC_NO,  K214 }, \
+    { K300, KC_NO, K302, K303,  K304,  K305,  K306, K307,  K308, K309,   K310, K311, KC_NO, K313,   K314 }, \
+    { K400, K401,  K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, K413,   K414 }, \
+}
+
+#define LAYOUT_60_iso( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,       \
+    K400, K401, K402,                   K406,                   K410, K411,       K413, K414 \
+) \
+{ \
+    { K000, K001,  K002, K003,  K004,  K005,  K006, K007,  K008,  K009,  K010, K011, K012,  KC_NO, K014 }, \
+    { K100, KC_NO, K102, K103,  K104,  K105,  K106, K107,  K108,  K109,  K110, K111, K112,  K113,  KC_NO }, \
+    { K200, KC_NO, K202, K203,  K204,  K205,  K206, K207,  K208,  K209,  K210, K211, K212,  K213,  K214 }, \
+    { K300, K301,  K302, K303,  K304,  K305,  K306, K307,  K308,  K309,  K310, K311, KC_NO, K313,  KC_NO }, \
+    { K400, K401,  K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, K413,  K414 }, \
+}
+
+#define LAYOUT_60_hhkb( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+          K401, K402,                   K406,                         K411,       K413      \
+) \
+{ \
+    { K000,  K001,   K002, K003,  K004,  K005,  K006, K007,  K008,  K009,  K010, K011, K012,  K013,  K014 }, \
+    { K100,  KC_NO,  K102, K103,  K104,  K105,  K106, K107,  K108,  K109,  K110, K111, K112,  K113,  K114 }, \
+    { K200,  KC_NO,  K202, K203,  K204,  K205,  K206, K207,  K208,  K209,  K210, K211, K212,  KC_NO, K214 }, \
+    { K300,  KC_NO,  K302, K303,  K304,  K305,  K306, K307,  K308,  K309,  K310, K311, KC_NO, K313,  K314 }, \
+    { KC_NO, K401,   K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, KC_NO, K411, KC_NO, K413, KC_NO }, \
+}
+
+#define LAYOUT_60_hhkb_split_space( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+          K401, K402,       K404,       K406,       K408,             K411,       K413      \
+) \
+{ \
+    { K000,  K001,   K002, K003,  K004, K005,  K006, K007,  K008, K009,  K010, K011, K012,  K013,  K014 }, \
+    { K100,  KC_NO,  K102, K103,  K104, K105,  K106, K107,  K108, K109,  K110, K111, K112,  K113,  K114 }, \
+    { K200,  KC_NO,  K202, K203,  K204, K205,  K206, K207,  K208, K209,  K210, K211, K212,  KC_NO, K214 }, \
+    { K300,  KC_NO,  K302, K303,  K304, K305,  K306, K307,  K308, K309,  K310, K311, KC_NO, K313,  K314 }, \
+    { KC_NO, K401,   K402, KC_NO, K404, KC_NO, K406, KC_NO, K408, KC_NO, KC_NO, K411, KC_NO, K413, KC_NO }, \
+}
+
+#define LAYOUT_60_hhkb_split_625u_space( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+    K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
+    K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
+          K401, K402,       K404,       K406,       K408,       K410, K411,       K413      \
+) \
+{ \
+    { K000,  K001,   K002, K003,  K004, K005,  K006, K007,  K008, K009,  K010, K011, K012,  K013,  K014 }, \
+    { K100,  KC_NO,  K102, K103,  K104, K105,  K106, K107,  K108, K109,  K110, K111, K112,  K113,  K114 }, \
+    { K200,  KC_NO,  K202, K203,  K204, K205,  K206, K207,  K208, K209,  K210, K211, K212,  KC_NO, K214 }, \
+    { K300,  KC_NO,  K302, K303,  K304, K305,  K306, K307,  K308, K309,  K310, K311, KC_NO, K313,  K314 }, \
+    { KC_NO, K401,   K402, KC_NO, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, KC_NO, K413, KC_NO }, \
+}
+
+// Backlighting
+typedef union {
+    uint8_t raw;
+    struct {
+        bool    enable :1;
+        bool    breathing : 1;
+        uint8_t level  :6;
+    };
+} backlight_levels_config_t;
+
+extern backlight_levels_config_t kb_backlight_config;
+extern bool kb_backlight_breathing;
+
+void backlight_init_ports(void);
+void backlight_set(uint8_t level);
+bool is_breathing(void);
+void breathing_enable(void);
+void breathing_disable(void);