Make delay for Capslock in Hold-Tap functions configurable (#5497)

* Increase delay for Hold-Tap register for CAPSLOCK

Because it seems that the 80ms delay wasn't too much

* Screw it, make the caps delay a define and make it configurable

docs/config_options.md

@@ -171,6 +171,8 @@ If you define these options you will enable the associated feature, which may in
   * how long for the Combo keys to be detected. Defaults to `TAPPING_TERM` if not defined.
 * `#define TAP_CODE_DELAY 100`
   * Sets the delay between `register_code` and `unregister_code`, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds.
+* `#define TAP_HOLD_CAPS_DELAY 200`
+  * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPSLOCK` keycode, as this has some special handling on MacOS.  The value is in milliseconds, and defaults to 200ms if not defined. 
 
 ## RGB Light Configuration
 

docs/feature_rgblight.md

@@ -129,7 +129,7 @@ The following options are used to tweak the various animations:
 |`RGBLIGHT_EFFECT_KNIGHT_LED_NUM`    |`RGBLED_NUM` |The number of LEDs to have the "Knight" animation travel                             |
 |`RGBLIGHT_EFFECT_KNIGHT_LENGTH`     |`3`          |The number of LEDs to light up for the "Knight" animation                            |
 |`RGBLIGHT_EFFECT_KNIGHT_OFFSET`     |`0`          |The number of LEDs to start the "Knight" animation from the start of the strip by    |
-|`RGBLIGHT_RAINBOW_SWIRL_RANGE`      |`360`        |Range adjustment for the rainbow swirl effect to get different swirls                |
+|`RGBLIGHT_RAINBOW_SWIRL_RANGE`      |`255`        |Range adjustment for the rainbow swirl effect to get different swirls                |
 |`RGBLIGHT_EFFECT_SNAKE_LENGTH`      |`4`          |The number of LEDs to light up for the "Snake" animation                             |
 
 ### Example Usage to Reduce Memory Footprint
@@ -176,44 +176,100 @@ const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64};
 
 If you need to change your RGB lighting in code, for example in a macro to change the color whenever you switch layers, QMK provides a set of functions to assist you. See [`rgblight.h`](https://github.com/qmk/qmk_firmware/blob/master/quantum/rgblight.h) for the full list, but the most commonly used functions include:
 
-|Function                                    |Description                                                                                                                                                   |
+### Utility Functions
-|--------------------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------|
+|Function                                    |Description                                                        |
-|`rgblight_enable()`                         |Turn LEDs on, based on their previous state                                                                                                                   |
+|--------------------------------------------|-------------------------------------------------------------------|
-|`rgblight_enable_noeeprom()`                |Turn LEDs on, based on their previous state (not written to EEPROM)                                                                                           |
+|`sethsv(hue, sat, val, ledbuf)`             |Set ledbuf to the given HSV value                                  |
-|`rgblight_disable()`                        |Turn LEDs off                                                                                                                                                 |
+|`sethsv_raw(hue, sat, val, ledbuf)`         |Set ledbuf to the given HSV value without RGBLIGHT_LIMIT_VAL check |
-|`rgblight_disable_noeeprom()`               |Turn LEDs off (not written to EEPROM)                                                                                                                         |
+|`setrgb(r, g, b, ledbuf)`                   |Set ledbuf to the given RGB value where `r`/`g`/`b`                |
-|`rgblight_mode(x)`                          |Set the mode, if RGB animations are enabled                                                                                                                   |
+
-|`rgblight_mode_noeeprom(x)`                 |Set the mode, if RGB animations are enabled (not written to EEPROM)                                                                                           |
+### Low level Functions
-|`rgblight_setrgb(r, g, b)`                  |Set all LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                                           |
+|Function                                    |Description                                |
-|`rgblight_setrgb_at(r, g, b, led)`          |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)              |
+|--------------------------------------------|-------------------------------------------|
+|`rgblight_set()`                            |Flash out led buffers to LEDs              |
+|`rgblight_set_clipping_range(pos, num)`     |Set clipping Range. see [Clipping Range](#clipping-range) |
+
+Example:
+```c
+sethsv(HSV_WHITE, (LED_TYPE *)&led[0]); // led 0
+sethsv(HSV_RED,   (LED_TYPE *)&led[1]); // led 1
+sethsv(HSV_GREEN, (LED_TYPE *)&led[2]); // led 2
+rgblight_set(); // Utility functions do not call rgblight_set() automatically, so they need to be called explicitly.
+```
+
+### Effects and Animations Functions
+#### effect range setting
+|Function                                    |Description       |
+|--------------------------------------------|------------------|
+|`rgblight_set_effect_range(pos, num)`       |Set Effects Range |
+
+#### direct operation
+|Function                                    |Description  |
+|--------------------------------------------|-------------|
+|`rgblight_setrgb_at(r, g, b, index)`          |Set a single LED to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `index` is between 0 and `RGBLED_NUM` (not written to EEPROM) |
+|`rgblight_sethsv_at(h, s, v, index)`          |Set a single LED to the given HSV value, where `h`/`s`/`v` are between 0 and 255, and `index` is between 0 and `RGBLED_NUM` (not written to EEPROM) |
 |`rgblight_setrgb_range(r, g, b, start, end)`|Set a continuous range of LEDs to the given RGB value, where `r`/`g`/`b` are between 0 and 255 and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
-|`rgblight_setrgb_master(r, g, b)`           |Set the LEDs on the master side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                      |
+|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h`/`s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
-|`rgblight_setrgb_slave(r, g, b)`            |Set the LEDs on the slave side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM)                                       |
+|`rgblight_setrgb(r, g, b)`                  |Set effect range LEDs to the given RGB value where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
-|`rgblight_sethsv(h, s, v)`                  |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255                                                          |
+|`rgblight_setrgb_master(r, g, b)`           |Set the LEDs on the master side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
-|`rgblight_sethsv_noeeprom(h, s, v)`         |Set all LEDs to the given HSV value where `h` is between 0 and 360 and `s`/`v` are between 0 and 255 (not written to EEPROM)                                  |
+|`rgblight_setrgb_slave(r, g, b)`            |Set the LEDs on the slave side  to the given RGB value, where `r`/`g`/`b` are between 0 and 255 (not written to EEPROM) |
-|`rgblight_sethsv_at(h, s, v, led)`          |Set a single LED to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `led` is between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_sethsv_master(h, s, v)`           |Set the LEDs on the master side to the given HSV value, where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
-|`rgblight_sethsv_range(h, s, v, start, end)`|Set a continuous range of LEDs to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255, and `start`(included) and `stop`(excluded) are between 0 and `RGBLED_NUM` (not written to EEPROM)|
+|`rgblight_sethsv_slave(h, s, v)`            |Set the LEDs on the slave side to the given HSV value, where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
-|`rgblight_sethsv_master(h, s, v)`           |Set the LEDs on the master side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM)                 |
+
-|`rgblight_sethsv_slave(h, s, v)`            |Set the LEDs on the slave side to the given HSV value, where `h` is between 0 and 360, `s`/`v` are between 0 and 255 (not written to EEPROM)                  |
+Example:
-|`rgblight_toggle()`                         |Toggle all LEDs between on and off                                                                                                                            |
+```c
-|`rgblight_toggle_noeeprom()`                |Toggle all LEDs between on and off (not written to EEPROM)                                                                                                    |
+rgblight_sethsv(HSV_WHITE, 0); // led 0
-|`rgblight_step()`                           |Change the mode to the next RGB animation in the list of enabled RGB animations                                                                               |
+rgblight_sethsv(HSV_RED,   1); // led 1
-|`rgblight_step_noeeprom()`                  |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM)                                                       |
+rgblight_sethsv(HSV_GREEN, 2); // led 2
-|`rgblight_step_reverse()`                   |Change the mode to the previous RGB animation in the list of enabled RGB animations                                                                           |
+// The above functions automatically calls rgblight_set(), so there is no need to call it explicitly.
-|`rgblight_step_reverse_noeeprom()`          |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM)                                                   |
+// Note that it is inefficient to call repeatedly.
-|`rgblight_increase_hue()`                   |Increase the hue for all LEDs. This wraps around at maximum hue                                                                                               |
+```
-|`rgblight_increase_hue_noeeprom()`          |Increase the hue for all LEDs. This wraps around at maximum hue (not written to EEPROM)                                                                       |
+
-|`rgblight_decrease_hue()`                   |Decrease the hue for all LEDs. This wraps around at minimum hue                                                                                               |
+#### effect mode change
-|`rgblight_decrease_hue_noeeprom()`          |Decrease the hue for all LEDs. This wraps around at minimum hue (not written to EEPROM)                                                                       |
+|Function                                    |Description  |
-|`rgblight_increase_sat()`                   |Increase the saturation for all LEDs. This wraps around at maximum saturation                                                                                 |
+|--------------------------------------------|-------------|
-|`rgblight_increase_sat_noeeprom()`          |Increase the saturation for all LEDs. This wraps around at maximum saturation (not written to EEPROM)                                                         |
+|`rgblight_mode(x)`                          |Set the mode, if RGB animations are enabled |
-|`rgblight_decrease_sat()`                   |Decrease the saturation for all LEDs. This wraps around at minimum saturation                                                                                 |
+|`rgblight_mode_noeeprom(x)`                 |Set the mode, if RGB animations are enabled (not written to EEPROM) |
-|`rgblight_decrease_sat_noeeprom()`          |Decrease the saturation for all LEDs. This wraps around at minimum saturation (not written to EEPROM)                                                         |
+|`rgblight_step()`                           |Change the mode to the next RGB animation in the list of enabled RGB animations |
-|`rgblight_increase_val()`                   |Increase the value for all LEDs. This wraps around at maximum value                                                                                           |
+|`rgblight_step_noeeprom()`                  |Change the mode to the next RGB animation in the list of enabled RGB animations (not written to EEPROM) |
-|`rgblight_increase_val_noeeprom()`          |Increase the value for all LEDs. This wraps around at maximum value (not written to EEPROM)                                                                   |
+|`rgblight_step_reverse()`                   |Change the mode to the previous RGB animation in the list of enabled RGB animations |
-|`rgblight_decrease_val()`                   |Decrease the value for all LEDs. This wraps around at minimum value                                                                                           |
+|`rgblight_step_reverse_noeeprom()`          |Change the mode to the previous RGB animation in the list of enabled RGB animations (not written to EEPROM) |
-|`rgblight_decrease_val_noeeprom()`          |Decrease the value for all LEDs. This wraps around at minimum value (not written to EEPROM)                                                                   |
+
-|`rgblight_set_clipping_range(pos, num)`     |Set clipping Range                                                                                                                                            |
+#### effects mode disable/enable
+|Function                                    |Description  |
+|--------------------------------------------|-------------|
+|`rgblight_toggle()`                         |Toggle effect range LEDs between on and off |
+|`rgblight_toggle_noeeprom()`                |Toggle effect range LEDs between on and off (not written to EEPROM) |
+|`rgblight_enable()`                         |Turn effect range LEDs on, based on their previous state |
+|`rgblight_enable_noeeprom()`                |Turn effect range LEDs on, based on their previous state (not written to EEPROM) |
+|`rgblight_disable()`                        |Turn effect range LEDs off |
+|`rgblight_disable_noeeprom()`               |Turn effect range LEDs off (not written to EEPROM) |
+
+#### hue, sat, val change
+|Function                                    |Description  |
+|--------------------------------------------|-------------|
+|`rgblight_increase_hue()`                   |Increase the hue for effect range LEDs. This wraps around at maximum hue |
+|`rgblight_increase_hue_noeeprom()`          |Increase the hue for effect range LEDs. This wraps around at maximum hue (not written to EEPROM) |
+|`rgblight_decrease_hue()`                   |Decrease the hue for effect range LEDs. This wraps around at minimum hue |
+|`rgblight_decrease_hue_noeeprom()`          |Decrease the hue for effect range LEDs. This wraps around at minimum hue (not written to EEPROM) |
+|`rgblight_increase_sat()`                   |Increase the saturation for effect range LEDs. This wraps around at maximum saturation |
+|`rgblight_increase_sat_noeeprom()`          |Increase the saturation for effect range LEDs. This wraps around at maximum saturation (not written to EEPROM) |
+|`rgblight_decrease_sat()`                   |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation |
+|`rgblight_decrease_sat_noeeprom()`          |Decrease the saturation for effect range LEDs. This wraps around at minimum saturation (not written to EEPROM) |
+|`rgblight_increase_val()`                   |Increase the value for effect range LEDs. This wraps around at maximum value |
+|`rgblight_increase_val_noeeprom()`          |Increase the value for effect range LEDs. This wraps around at maximum value (not written to EEPROM) |
+|`rgblight_decrease_val()`                   |Decrease the value for effect range LEDs. This wraps around at minimum value |
+|`rgblight_decrease_val_noeeprom()`          |Decrease the value for effect range LEDs. This wraps around at minimum value (not written to EEPROM) |
+|`rgblight_sethsv(h, s, v)`                  |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 |
+|`rgblight_sethsv_noeeprom(h, s, v)`         |Set effect range LEDs to the given HSV value where `h`/`s`/`v` are between 0 and 255 (not written to EEPROM) |
+
+#### query
+|Function               |Description      |
+|-----------------------|-----------------|
+|`rgblight_get_mode()`  |Get current mode |
+|`rgblight_get_hue()`   |Get current hue  |
+|`rgblight_get_sat()`   |Get current sat  |
+|`rgblight_get_val()`   |Get current val  |
 
 ## Colors
 
@@ -324,4 +380,6 @@ In addition to setting the Clipping Range, you can use `RGBLIGHT_LED_MAP` togeth
 ```
 <img src="https://user-images.githubusercontent.com/2170248/55743747-119e4c00-5a6e-11e9-91e5-013203ffae8a.JPG" alt="clip mapped" width="70%"/>
 
+## Hardware Modification
+
 If your keyboard lacks onboard underglow LEDs, you may often be able to solder on an RGB LED strip yourself. You will need to find an unused pin to wire to the data pin of your LED strip. Some keyboards may break out unused pins from the MCU to make soldering easier. The other two pins, VCC and GND, must also be connected to the appropriate power pins.

docs/feature_space_cadet.md

@@ -20,7 +20,7 @@ Firstly, in your keymap, do one of the following:
 |`KC_RCPC`  |Right Control when held, `)` when tapped   |
 |`KC_LAPO`  |Left Alt when held, `(` when tapped        |
 |`KC_RAPC`  |Right Alt when held, `)` when tapped       |
-|`KC_SFTENT`|Right Shift when held, `Enter` when tapped |
+|`KC_SFTENT`|Right Shift when held, Enter when tapped   |
 
 ## Caveats
 
@@ -38,10 +38,10 @@ By default Space Cadet assumes a US ANSI layout, but if your layout uses differe
 |----------------|-------------------------------|---------------------------------------------------------------------------------|
 |`LSPO_KEYS`     |`KC_LSFT, LSPO_MOD, LSPO_KEY`  |Send `KC_LSFT` when held, the mod and  key defined by `LSPO_MOD` and `LSPO_KEY`. |
 |`RSPC_KEYS`     |`KC_RSFT, RSPC_MOD, RSPC_KEY`  |Send `KC_RSFT` when held, the mod and  key defined by `RSPC_MOD` and `RSPC_KEY`. |
-|`LCPO_KEYS`     |`KC_LCTL, KC_LCTL, KC_9`       |Send `KC_LCTL` when held, the mod `KC_LCTL` with the key `KC_9` when tapped.     |
+|`LCPO_KEYS`     |`KC_LCTL, KC_LSFT, KC_9`       |Send `KC_LCTL` when held, the mod `KC_LSFT` with the key `KC_9` when tapped.     |
-|`RCPC_KEYS`     |`KC_RCTL, KC_RCTL, KC_0`       |Send `KC_RCTL` when held, the mod `KC_RCTL` with the key `KC_0` when tapped.     |
+|`RCPC_KEYS`     |`KC_RCTL, KC_RSFT, KC_0`       |Send `KC_RCTL` when held, the mod `KC_RSFT` with the key `KC_0` when tapped.     |
-|`LAPO_KEYS`     |`KC_LALT, KC_LALT, KC_9`       |Send `KC_LALT` when held, the mod `KC_LALT` with the key `KC_9` when tapped.     |
+|`LAPO_KEYS`     |`KC_LALT, KC_LSFT, KC_9`       |Send `KC_LALT` when held, the mod `KC_LSFT` with the key `KC_9` when tapped.     |
-|`RAPC_KEYS`     |`KC_RALT, KC_RALT, KC_0`       |Send `KC_RALT` when held, the mod `KC_RALT` with the key `KC_0` when tapped.     |
+|`RAPC_KEYS`     |`KC_RALT, KC_RSFT, KC_0`       |Send `KC_RALT` when held, the mod `KC_RSFT` with the key `KC_0` when tapped.     |
 |`SFTENT_KEYS`   |`KC_RSFT, KC_TRNS, SFTENT_KEY` |Send `KC_RSFT` when held, no mod with the key `SFTENT_KEY` when tapped.          |
 
 

docs/feature_userspace.md

@@ -110,7 +110,7 @@ QMK has a bunch of [functions](custom_quantum_functions.md) that have [`_quantum
 However, you can actually add support for keymap version, so that you can use it in both your userspace and your keymap! 
 
 
-For instance, lets looks at the `layer_state_set_user` function.  Lets enable the [Tri Layer State](ref_functions.md#olkb-tri-layers) functionalitly to all of our boards, and then still have your `keymap.c` still able to use this functionality. 
+For instance, let's look at the `layer_state_set_user()` function.  You can enable the [Tri Layer State](ref_functions.md#olkb-tri-layers) functionality on all of your boards, while also retaining the Tri Layer functionality in your `keymap.c` files. 
 
 In your `<name.c>` file, you'd want to add this: 
 ```c

docs/keycodes.md

@@ -216,6 +216,11 @@ This is a reference only. Each group of keys links to the page documenting their
 |`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
 |`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
 |`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LCPO`      |           |Left Control when held, `(` when tapped                              |
+|`KC_RCPC`      |           |Right Control when held, `)` when tapped                             |
+|`KC_LAPO`      |           |Left Alt when held, `(` when tapped                                  |
+|`KC_RAPC`      |           |Right Alt when held, `)` when tapped                                 |
+|`KC_SFTENT`    |           |Right Shift when held, Enter when tapped                             |
 |`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
 |`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
 |`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |

docs/quantum_keycodes.md

@@ -1,6 +1,6 @@
 # Quantum Keycodes
 
-Quantum keycodes allow for easier customisation of your keymap than the basic ones provide, without having to define custom actions.
+Quantum keycodes allow for easier customization of your keymap than the basic ones provide, without having to define custom actions.
 
 All keycodes within quantum are numbers between `0x0000` and `0xFFFF`. Within your `keymap.c` it may look like you have functions and other special cases, but ultimately the C preprocessor will translate those into a single 4 byte integer. QMK has reserved `0x0000` through `0x00FF` for standard keycodes. These are keycodes such as `KC_A`, `KC_1`, and `KC_LCTL`, which are basic keys defined in the USB HID specification.
 
@@ -16,6 +16,11 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are
 |`KC_GESC`      |`GRAVE_ESC`|Escape when tapped, <code>&#96;</code> when pressed with Shift or GUI|
 |`KC_LSPO`      |           |Left Shift when held, `(` when tapped                                |
 |`KC_RSPC`      |           |Right Shift when held, `)` when tapped                               |
+|`KC_LCPO`      |           |Left Control when held, `(` when tapped                              |
+|`KC_RCPC`      |           |Right Control when held, `)` when tapped                             |
+|`KC_LAPO`      |           |Left Alt when held, `(` when tapped                                  |
+|`KC_RAPC`      |           |Right Alt when held, `)` when tapped                                 |
+|`KC_SFTENT`    |           |Right Shift when held, Enter when tapped                             |
 |`KC_LEAD`      |           |The [Leader key](feature_leader_key.md)                              |
 |`KC_LOCK`      |           |The [Lock key](feature_key_lock.md)                                  |
 |`FUNC(n)`      |`F(n)`     |Call `fn_action(n)` (deprecated)                                     |

drivers/issi/is31fl3733.c

@@ -75,10 +75,10 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required = false;
+bool g_pwm_buffer_update_required[DRIVER_COUNT] = { false };
 
 uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required = false;
+bool g_led_control_registers_update_required[DRIVER_COUNT] = { false };
 
 void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data )
 {
@@ -123,12 +123,13 @@ void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
     }
 }
 
-void IS31FL3733_init( uint8_t addr )
+void IS31FL3733_init( uint8_t addr, uint8_t sync)
 {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, shutdown is enabled last.
     // Set up the mode and other settings, clear the PWM registers,
     // then disable software shutdown.
+    // Sync is passed so set it according to the datasheet.
 
     // Unlock the command register.
     IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
@@ -161,7 +162,7 @@ void IS31FL3733_init( uint8_t addr )
     // Set global current to maximum.
     IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
     // Disable software shutdown.
-    IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+    IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01 );
 
     // Wait 10ms to ensure the device has woken up.
     #ifdef __AVR__
@@ -179,7 +180,7 @@ void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
         g_pwm_buffer[led.driver][led.r] = red;
         g_pwm_buffer[led.driver][led.g] = green;
         g_pwm_buffer[led.driver][led.b] = blue;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required[led.driver] = true;
     }
 }
 
@@ -218,35 +219,34 @@ void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, b
         g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
     }
 
-    g_led_control_registers_update_required = true;
+    g_led_control_registers_update_required[led.driver] = true;
 
 }
 
-void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3733_update_pwm_buffers( uint8_t addr, uint8_t index )
 {
-    if ( g_pwm_buffer_update_required )
+    if ( g_pwm_buffer_update_required[index] )
     {
         // Firstly we need to unlock the command register and select PG1
-        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
 
-        IS31FL3733_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+        IS31FL3733_write_pwm_buffer( addr, g_pwm_buffer[index] );
-        //IS31FL3733_write_pwm_buffer( addr2, g_pwm_buffer[1] );
     }
-    g_pwm_buffer_update_required = false;
+    g_pwm_buffer_update_required[index] = false;
 }
 
-void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+void IS31FL3733_update_led_control_registers( uint8_t addr, uint8_t index )
 {
-    if ( g_led_control_registers_update_required )
+    if ( g_led_control_registers_update_required[index] )
     {
         // Firstly we need to unlock the command register and select PG0
-        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3733_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
         for ( int i=0; i<24; i++ )
         {
-            IS31FL3733_write_register(addr1, i, g_led_control_registers[0][i] );
+            IS31FL3733_write_register(addr, i, g_led_control_registers[index][i] );
-            //IS31FL3733_write_register(addr2, i, g_led_control_registers[1][i] );
         }
     }
+    g_led_control_registers_update_required[index] = false;
 }

drivers/issi/is31fl3733.h

@@ -32,7 +32,7 @@ typedef struct is31_led {
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 
-void IS31FL3733_init( uint8_t addr );
+void IS31FL3733_init( uint8_t addr, uint8_t sync );
 void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data );
 void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
 
@@ -45,8 +45,8 @@ void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, b
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3733_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3733_update_pwm_buffers( uint8_t addr, uint8_t index );
-void IS31FL3733_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3733_update_led_control_registers( uint8_t addr, uint8_t index );
 
 #define A_1  0x00
 #define A_2  0x01

keyboards/40percentclub/nein/config.h

@@ -0,0 +1,239 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x9999
+#define MANUFACTURER    di0ib
+#define PRODUCT         The nein Keyboard
+#define DESCRIPTION     9 key macropad
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/* Keyboard Matrix Assignments */
+#define DIRECT_PINS { \
+    { F4, F5, F6 }, \
+    { F7, B1, B3 }, \
+    { B2, B6, B5 }  \
+}
+#define UNUSED_PINS
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/40percentclub/nein/info.json

@@ -0,0 +1,22 @@
+{
+  "keyboard_name": "nein",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 3,
+  "height": 3,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"x":0, "y":0},
+        {"x":1, "y":0},
+        {"x":2, "y":0},
+        {"x":0, "y":1},
+        {"x":1, "y":1},
+        {"x":2, "y":1},
+        {"x":0, "y":2},
+        {"x":1, "y":2},
+        {"x":2, "y":2}
+      ]
+    }
+  }
+}

keyboards/40percentclub/nein/keymaps/default/keymap.c

@@ -0,0 +1,29 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_ortho_3x3(
+        KC_MUTE, KC_HOME, KC_MPLY, \
+        MO(1),   KC_UP,   KC_END, \
+        KC_LEFT, KC_DOWN, KC_RGHT \
+    ),
+    [1] = LAYOUT_ortho_3x3(
+        RESET,   _______, KC_STOP, \
+        _______, _______, RGB_MOD, \
+        KC_MPRV, _______, KC_MNXT \
+    ),
+};

keyboards/40percentclub/nein/nein.c

@@ -0,0 +1,16 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "nein.h"

keyboards/40percentclub/nein/nein.h

@@ -0,0 +1,37 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ortho_3x3( \
+    k00, k01, k02, \
+    k10, k11, k12, \
+    k20, k21, k22  \
+) \
+{ \
+    { k00, k01, k02 }, \
+    { k10, k11, k12 }, \
+    { k20, k21, k22 }  \
+}

keyboards/40percentclub/nein/readme.md

@@ -0,0 +1,18 @@
+# nein
+
+![nein](https://2.bp.blogspot.com/-avYV4grcAPQ/XL9a67SxgKI/AAAAAAACVCE/GSGVYRThaEEDd14M3LG34gQTv5ZabRI0QCEwYBhgL/s640/a.jpg)
+===
+
+A 9 key macropad.
+
+Powered by a Pro Micro and can fit any of the various different sized variations of Pro Micro.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: nein PCB  
+Hardware Availability: [nein project on 40% Keyboards](https://www.40percent.club/2019/04/nein.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 40percentclub/nein:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/nein/rules.mk

@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 	    # Enable support for HD44780 based LCDs (+400)

keyboards/ai03/lunar/info.json

@@ -7,7 +7,78 @@
     "height": 5, 
     "layouts": {
         "LAYOUT": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Home", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.5}, {"x":4.25, "y":4, "w":2.25}, {"x":6.5, "y":4, "w":1.5}, {"x":8, "y":4, "w":2.75}, {"label":"Alt", "x":10.75, "y":4, "w":1.25}, {"label":"Win", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"BackspaceL", "x":13, "y":0},
+                {"label":"BackspaceR", "x":14, "y":0},
+                {"label":"Insert", "x":15, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"Delete", "x":15, "y":1},
+                {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Home", "x":15, "y":2},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Shift", "x":12.25, "y":3, "w":1.75},
+                {"label":"\u2191", "x":14, "y":3},
+                {"label":"End", "x":15, "y":3},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.5},
+                {"label":"Win", "x":1.5, "y":4, "w":1.25},
+                {"label":"Alt", "x":2.75, "y":4, "w":1.5},
+                {"x":4.25, "y":4, "w":2.25},
+                {"x":6.5, "y":4, "w":1.5},
+                {"x":8, "y":4, "w":2.75},
+                {"label":"Alt", "x":10.75, "y":4, "w":1.25},
+                {"label":"Win", "x":12, "y":4},
+                {"label":"\u2190", "x":13, "y":4},
+                {"label":"\u2193", "x":14, "y":4},
+                {"label":"\u2192", "x":15, "y":4}
+            ]
         }
     }
 }

keyboards/ai03/orbit/info.json

@@ -0,0 +1,88 @@
+{
+    "keyboard_name": "orbit", 
+    "url": "https://github.com/ai03-2725/Orbit", 
+    "maintainer": "ai03", 
+    "width": 16, 
+    "height": 6, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x":0,  "y":0.63},
+                {"x":1,  "y":0.38},
+                {"x":2,  "y":0.38},
+                {"x":3,  "y":0.13},
+                {"x":4,  "y":0},
+                {"x":5,  "y":0.13},
+                {"x":6,  "y":0.25},
+                {"x":9,  "y":0.25},
+                {"x":10, "y":0.13},
+                {"x":11, "y":0},
+                {"x":12, "y":0.13},
+                {"x":13, "y":0.38},
+                {"x":14, "y":0.38},
+                {"x":15, "y":0.63},
+
+                {"x":0,  "y":1.63},
+                {"x":1,  "y":1.38},
+                {"x":2,  "y":1.38},
+                {"x":3,  "y":1.13},
+                {"x":4,  "y":1},
+                {"x":5,  "y":1.13},
+                {"x":6,  "y":1.25},
+                {"x":9,  "y":1.25},
+                {"x":10, "y":1.13},
+                {"x":11, "y":1},
+                {"x":12, "y":1.13},
+                {"x":13, "y":1.38},
+                {"x":14, "y":1.38},
+                {"x":15, "y":1.63},
+
+                {"x":0,  "y":2.63},
+                {"x":1,  "y":2.38},
+                {"x":2,  "y":2.38},
+                {"x":3,  "y":2.13},
+                {"x":4,  "y":2},
+                {"x":5,  "y":2.13},
+                {"x":6,  "y":2.25},
+                {"x":9,  "y":2.25},
+                {"x":10, "y":2.13},
+                {"x":11, "y":2},
+                {"x":12, "y":2.13},
+                {"x":13, "y":2.38},
+                {"x":14, "y":2.38},
+                {"x":15, "y":2.63},
+
+                {"x":0,  "y":3.63},
+                {"x":1,  "y":3.38},
+                {"x":2,  "y":3.38},
+                {"x":3,  "y":3.13},
+                {"x":4,  "y":3},
+                {"x":5,  "y":3.13},
+                {"x":6,  "y":3.25},
+                {"x":9,  "y":3.25},
+                {"x":10, "y":3.13},
+                {"x":11, "y":3},
+                {"x":12, "y":3.13},
+                {"x":13, "y":3.38},
+                {"x":14, "y":3.38},
+                {"x":15, "y":3.63},
+
+                {"x":1,  "y":4.38},
+                {"x":2,  "y":4.38},
+                {"x":3,  "y":4.13},
+                {"x":4,  "y":4},
+
+                {"x":5.5, "y":4.25},
+                {"x":6.5, "y":4.5, "h":1.5},
+
+                {"x":8.5, "y":4.5, "h":1.5},
+                {"x":9.5, "y":4.25},
+
+                {"x":11, "y":4},
+                {"x":12, "y":4.13},
+                {"x":13, "y":4.38},
+                {"x":14, "y":4.38}
+            ]
+        }
+    }
+}

keyboards/doro67/multi/multi.c

@@ -19,6 +19,7 @@ void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 
+    setPinOutput(E6);
 	matrix_init_user();
 }
 
@@ -39,5 +40,11 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
 
+	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+		writePinLow(E6);
+	} else {
+		writePinHigh(E6);
+	}
+
 	led_set_user(usb_led);
 }

keyboards/dz60/dz60.h

@@ -404,13 +404,13 @@
     k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
     k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \
     k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, k3e, \
-    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b,      k4d, k4e  \
 ) { \
     { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
     { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
     { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
     { k30,  k31,   k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  k3b,   KC_NO,k3d,  k3e   }, \
-    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   KC_NO,k4d,  k4e   }  \
 }
 
 #endif

keyboards/dz60/keymaps/olligranlund_iso/keymap.c

@@ -26,13 +26,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,     KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
 		MO(1),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,     KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
 		KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,     KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_PSCR,
-		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, MO(1),    KC_NO,   KC_APP,   KC_RCTL),
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, MO(1),    KC_APP,  KC_RCTL),
 
 	LAYOUT_60_iso_split_space_bs_rshift(
 		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,
 		KC_NO,   KC_MPRV, KC_MPLY, KC_MNXT, KC_NO,   KC_NO,   KC_NO,   KC_PGDOWN,KC_UP,   KC_PGUP, KC_NO,   KC_NO,   KC_NO,
 		KC_NO,   KC_VOLD, KC_MUTE, KC_VOLU, KC_NO,   KC_NO,   KC_HOME,  KC_LEFT, KC_DOWN, KC_RGHT, KC_NO,   KC_NO,   KC_NO,   KC_NO,
 		KC_LSFT, KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_END,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_RSFT, KC_CAPS,
-		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, MO(1),    KC_NO,   KC_APP,  KC_RCTL),
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, MO(1),    KC_APP,  KC_RCTL),
 
 };

keyboards/ergodox_ez/info.json

@@ -1,7 +1,7 @@
 {
     "keyboard_name": "ErgoDox EZ",
     "url": "ergodox-ez.com",
-    "maintainer": "erez",
+    "maintainer": "ZSA",
     "width": 17,
     "height": 8,
 

keyboards/ergodox_ez/keymaps/pvinis/keymap.c

@@ -0,0 +1,330 @@
+// pvinis ergodox ez
+// ,------------------------------------.          ,------------------------------------.
+// |      |    |    |    |    |    |    |          |    |    |    |    |    |    |      |
+// |------+----+----+----+----+---------|          |----+----+----+----+----+----+------|
+// |      |    |    |    |    |    |    |          |    |    |    |    |    |    |      |
+// |------+----+----+----x----x----|    |          |    |----x----x----+----+----+------|
+// |      |    |    |    |    |    |----|          |----|    |    |    |    |    |      |
+// |------+----+----+----x----x----|    |          |    |----x----x----+----+----+------|
+// |      |    |    |    |    |    |    |          |    |    |    |    |    |    |      |
+// `------+----+----+----+----+---------'          `---------+----+----+----+----+------'
+//   |    |    |    |    |    |                              |    |    |    |    |    |
+//   `------------------------'                              `------------------------'
+//                              ,---------.      ,---------.
+//                              |    |    |      |    |    |
+//                         ,----+----+----|      |----+----+----.
+//                         |    |    |    |      |    |    |    |
+//                         |    |    |----|      |----|    |    |
+//                         |    |    |    |      |    |    |    |
+//                         `--------------'      `--------------'
+
+
+#include QMK_KEYBOARD_H
+#include "pvinis.h"
+#include "mousekey.h"
+
+
+// layers
+enum {
+  MOUSE = 8,
+};
+
+// extra keys
+enum {
+  NONE = 30,
+  TD_LAYR, // SYSCTL and MOUSE layer switch
+};
+
+// application selection
+// this is sending ctrl-alt-gui-<key>, and this is picked up by hammerspoon
+#define AP_SLCK ALLM(KC_S)
+#define AP_XCOD ALLM(KC_X)
+#define AP_MSGR ALLM(KC_M)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  // ,------------------------------------.          ,------------------------------------.
+  // |4xFLSH|    |    |    |    |    |Opt |          |    |    |    |    |    |    |      |
+  // |------+----+----+----+----+---------|          |----+----+----+----+----+----+------|
+  // | Tab  |    |    |    |    |    |    |          |    |    |    |    |    |    |      |
+  // |------+----+----+----x----x----|    |          |    |----x----x----+----+----+------|
+  // |EscCtl|    |    |    |    |    |----|          |----|    |    |    |    |    | Ent  |
+  // |------+----+----+----x----x----|    |          |    |----x----x----+----+----+------|
+  // |LShift|    |    |    |    |    |    |          |    |    |    |    |    |    |RShift|
+  // `------+----+----+----+----+---------'          `---------+----+----+----+----+------'
+  //   |    |    |    |    |Cmd |                              |    |    |    |    |    |
+  //   `------------------------'                              `------------------------'
+  //                              ,---------.      ,---------.
+  //                              |QWER|    |      |    |    |
+  //                         ,----+----+----|      |----+----+----.
+  //                         | Ba | L  |    |      |    |    |    |
+  //                         | ck |Shi |----|      |----|    |Spc |
+  //                         | spc| ft |    |      |    |    |    |
+  //                         `--------------'      `--------------'
+  [LR_BASE] = LAYOUT_ergodox_pretty_wrapper(
+    TD_3FLS, _______, _______, _______, _______, _______, KC_LALT,      _______, _______, _______, _______, _______, _______, _______,
+    KC_TAB , _______, _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______, _______, _______,
+    PV_ESCC, _______, _______, _______, _______, _______,                        _______, _______, _______, _______, _______, KC_ENT ,
+    KC_LSFT, _______, _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______, _______, KC_RSFT,
+    _______, _______, _______, KC_LGUI, SYMBOL ,                                          SYSCTL , KC_RALT, _______, _______, _______,
+                                                 QWERTY , CARPALX,      _______, _______,
+                                                          _______,      _______,
+                                        KC_BSPC, _______, _______,      _______, _______, KC_SPC
+  ),
+
+  // ,------------------------------------.          ,------------------------------------.
+  // |      |        NUMBERS_L       |    |          |  - |        NUMBERS_R       |  =   |
+  // |------+----+----+----+----+---------|          |----+----+----+----+----+----+------|
+  // |      |                        |  [ |          | ]  |                        |      |
+  // |------+                        |    |          |    |                        +------|
+  // |      |         QWERTY_L       |----|          |----|         QWERTY_R       |      |
+  // |------+                        |  ( |          | )  |                        +------|
+  // |      |                        |    |          |    |                        |      |
+  // `------+----+----+----+----+---------'          `---------+----+----+----+----+------'
+  //   |    | `  |    |    |    |                              |    |    |    |  ' |    |
+  //   `------------------------'                              `------------------------'
+  //                              ,---------.      ,---------.
+  //                              |    |    |      |    |    |
+  //                         ,----+----+----|      |----+----+----.
+  //                         |    |    |    |      |    |    |    |
+  //                         |    |    |----|      |----|    |    |
+  //                         |    |    |    |      |    |    |    |
+  //                         `--------------'      `--------------'
+  // See `users/pvinis/pvinis.h`
+  [LR_QWERTY] = LAYOUT_ergodox_pretty_wrapper(
+    _______, ________________NUMBERS_L__________________, _______,      KC_MINS, ________________NUMBERS_R__________________, KC_EQL ,
+    _______, _________________QWERTY_L1_________________, KC_LBRC,      KC_RBRC, _________________QWERTY_R1_________________, _______,
+    _______, _________________QWERTY_L2_________________,                        _________________QWERTY_R2_________________, _______,
+    _______, _________________QWERTY_L3_________________, KC_LPRN,      KC_RPRN, _________________QWERTY_R3_________________, _______,
+    _______, KC_GRV, _______, _______, _______,                                          _______, _______, _______, KC_QUOT , _______,
+                                                 _______, _______,      _______, _______,
+                                                          _______,      _______,
+                                        _______, _______, _______,      _______, _______, _______
+  ),
+
+  // ,------------------------------------.          ,------------------------------------.
+  // |      |        NUMBERS_L       |    |          |    |        NUMBERS_R       |      |
+  // |------+----+----+----+----+---------|          |----+----+----+----+----+----+------|
+  // |      |                        |    |          |    |                        |      |
+  // |------+                        |    |          |    |                        +------|
+  // |      |        CARPALX_L       |----|          |----|        CARPALX_R       |      |
+  // |------+                        |    |          |    |                        +------|
+  // |      |                        |    |          |    |                        |      |
+  // `------+----+----+----+----+---------'          `---------+----+----+----+----+------'
+  //   |    |    |    |    |    |                              |    |    |    |    |    |
+  //   `------------------------'                              `------------------------'
+  //                              ,---------.      ,---------.
+  //                              |    |    |      |    |    |
+  //                         ,----+----+----|      |----+----+----.
+  //                         |    |    |    |      |    |    |    |
+  //                         |    |    |----|      |----|    |    |
+  //                         |    |    |    |      |    |    |    |
+  //                         `--------------'      `--------------'
+  // See `users/pvinis/pvinis.h`
+  [LR_CARPALX] = LAYOUT_ergodox_pretty_wrapper(
+    _______, ________________NUMBERS_L__________________, _______,      _______, ________________NUMBERS_R__________________, _______,
+    _______, ________________CARPALX_L1_________________, _______,      _______, ________________CARPALX_R1_________________, _______,
+    _______, ________________CARPALX_L2_________________,                        ________________CARPALX_R2_________________, _______,
+    _______, ________________CARPALX_L3_________________, _______,      _______, ________________CARPALX_R3_________________, _______,
+    _______, _______, _______, _______, _______,                                          _______, _______, _______, _______, _______,
+                                                 _______, _______,      _______, _______,
+                                                          _______,      _______,
+                                        _______, _______, _______,      _______, _______, _______
+  ),
+
+  // See `users/pvinis/pvinis.h`
+  [LR_SYMBOL] = LAYOUT_ergodox_pretty_wrapper(
+    _______, ______________________F_L__________________, KC_F11 ,      KC_F12 , ______________________F_R__________________, _______,
+    _______, _________________SYMBOL_L1_________________, _______,      _______, _________________SYMBOL_R1_________________, _______,
+    _______, _________________SYMBOL_L2_________________,                        _________________SYMBOL_R2_________________, _______,
+    _______, _________________SYMBOL_L3_________________, _______,      _______, _________________SYMBOL_R3_________________, _______,
+    _______, _______, _______, _______, _______,                                          _______, _______, _______, _______, _______,
+                                                 _______, _______,      _______, _______,
+                                                          _______,      _______,
+                                        _______, _______, _______,      _______, _______, _______
+  ),
+
+  // See `users/pvinis/pvinis.h`
+  [LR_SYSCTL] = LAYOUT_ergodox_pretty_wrapper(
+    _______, _______, _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______,      _______, _________________SYSCTL_R1_________________, _______,
+    _______, _______, _______, _______, _______, _______,                        _________________SYSCTL_R2_________________, _______,
+    _______, _______, _______, _______, _______, _______, _______,      _______, _________________SYSCTL_R3_________________, _______,
+    _______, _______, _______, _______, _______,                                          _______, _______, _______, _______, _______,
+
+                                                 _______, _______,      _______, _______,
+                                                          _______,      _______,
+                                        _______, _______, _______,      _______, _______, _______
+  ),
+
+  // See `users/pvinis/pvinis.h`
+  [LR_KBCTL] = LAYOUT_ergodox_pretty_wrapper(
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,      XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,      XXXXXXX, __________________KBCTL_R1_________________, XXXXXXX,
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                        __________________KBCTL_R2_________________, XXXXXXX,
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,      XXXXXXX, __________________KBCTL_R3_________________, XXXXXXX,
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,                                          _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+
+                                                 XXXXXXX, XXXXXXX,      XXXXXXX, XXXXXXX,
+                                                          XXXXXXX,      XXXXXXX,
+                                        XXXXXXX, XXXXXXX, XXXXXXX,      XXXXXXX, XXXXXXX, XXXXXXX
+  ),
+
+/* MOUSE
+ * a keymap to control my system.
+ *
+ * ,--------------------------------------------------.           ,--------------------------------------------------.
+ * |   ^    |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+-------------|           |------+------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      | MsUp |      |      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |------|           |------|      |MsLeft| MsDn |MsRght|      |        |
+ * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
+ *   |      |      |      |      |      |                                       |      |      |      |      |      |
+ *   `----------------------------------'                                       `----------------------------------'
+ *                                        ,-------------.       ,-------------.
+ *                                        |      |      |       |      |MidClk|
+ *                                 ,------|------|------|       |------+------+------.
+ *                                 |      |      |      |       |      |Left  |Right |
+ *                                 |      |      |------|       |------| Click| Click|
+ *                                 |      |      |  ^   |       |      |      |      |
+ *                                 `--------------------'       `--------------------'
+ */
+  [MOUSE] = LAYOUT_ergodox_pretty(
+   KC_TRNS    ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
+  ,KC_NO      ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
+  ,KC_NO      ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO
+  ,KC_NO      ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO    ,KC_NO
+  ,KC_NO      ,KC_NO  ,KC_NO  ,KC_NO  ,KC_NO
+
+                                                        ,KC_NO  ,KC_NO
+                                                                ,KC_NO
+                                                ,KC_NO  ,KC_NO  ,KC_TRNS
+
+                    ,KC_NO    ,KC_NO  ,KC_NO    ,KC_NO    ,KC_NO    ,KC_NO    ,KC_NO
+                    ,KC_NO    ,KC_NO  ,KC_NO    ,KC_MS_U  ,KC_NO    ,KC_NO    ,KC_NO
+                              ,KC_NO  ,KC_MS_L  ,KC_MS_D  ,KC_MS_R  ,KC_NO    ,KC_NO
+                    ,KC_NO    ,KC_NO  ,KC_NO    ,KC_NO    ,KC_NO    ,KC_NO    ,KC_NO
+                                      ,KC_NO    ,KC_NO    ,KC_NO    ,KC_NO    ,KC_NO
+
+            ,KC_NO  ,KC_NO
+            ,KC_NO
+            ,KC_NO  ,KC_NO  ,KC_NO
+  ),
+};
+
+
+// keyboard initialization
+void keyboard_post_init_user_local(void) {
+  ergodox_led_all_on();
+  for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) {
+    ergodox_led_all_set(i);
+    wait_ms(5);
+  }
+  wait_ms(1000);
+  for (int i = LED_BRIGHTNESS_LO; i > 0; i--) {
+    ergodox_led_all_set(i);
+    wait_ms(10);
+  }
+  ergodox_led_all_off();
+
+  // restore default brightness for future use
+  ergodox_led_all_set(LED_BRIGHTNESS_HI);
+}
+
+// light up leds based on the layer
+uint32_t layer_state_set_user_local(uint32_t state) {
+  ergodox_right_led_1_off();
+  ergodox_right_led_2_off();
+  ergodox_right_led_3_off();
+  switch (biton32(state)) {
+  case LR_SYSCTL:
+    ergodox_right_led_3_on(); // blue
+    break;
+  case LR_KBCTL:
+    ergodox_right_led_1_on(); // red
+    break;
+  case LR_SYMBOL:
+    ergodox_right_led_2_on(); // green
+    break;
+  default: break;
+  }
+  return state;
+}
+
+// extra keys
+// const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  // switch (id) {
+  // }
+  // return MACRO_NONE;
+// }
+
+// tap dances
+
+// flash keyboard on 4x tap, with leds
+// void flash_each_tap(qk_tap_dance_state_t *state, void *user_data) {
+//   switch (state->count) {
+//   case 1:
+//     ergodox_right_led_3_on();
+//     break;
+//   case 2:
+//     ergodox_right_led_2_on();
+//     break;
+//   case 3:
+//     ergodox_right_led_1_on();
+//     break;
+//   case 4:
+//     ergodox_right_led_3_off();
+//     wait_ms(50);
+//     ergodox_right_led_2_off();
+//     wait_ms(50);
+//     ergodox_right_led_1_off();
+//     break;
+//   }
+// }
+
+// void flash_dance_finished(qk_tap_dance_state_t *state, void *user_data) {
+//   if (state->count >= 4) {
+//     reset_keyboard();
+//     reset_tap_dance(state);
+//   }
+// }
+
+// void flash_dance_reset(qk_tap_dance_state_t *state, void *user_data) {
+//   ergodox_right_led_1_off();
+//   wait_ms(50);
+//   ergodox_right_led_2_off();
+//   wait_ms(50);
+//   ergodox_right_led_3_off();
+// }
+
+// SYSCTL on first tap, MOUSE ON second tap
+// void layers_dance_finished(qk_tap_dance_state_t *state, void *user_data) {
+//   uint8_t layer = biton32(layer_state);
+
+//   switch(state->count) {
+//   case 1:
+//     switch(layer) {
+//     case LR_SYSCTL:
+//       layer_off(LR_SYSCTL);
+//       break;
+//     case MOUSE:
+//       layer_off(MOUSE);
+//       break;
+//     default:
+//       layer_on(LR_SYSCTL);
+//       break;
+//     }
+//     break;
+//   case 2:
+//     layer_on(MOUSE);
+//     break;
+//   }
+// }
+
+// qk_tap_dance_action_t tap_dance_actions[] = {
+  // [TD_FLSH] = ACTION_TAP_DANCE_FN_ADVANCED( flash_each_tap, flash_dance_finished, flash_dance_reset ),
+  // [TD_LAYR] = ACTION_TAP_DANCE_FN_ADVANCED( NULL, layers_dance_finished, NULL ),
+// };

keyboards/ergodox_ez/keymaps/pvinis/rules.mk

@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes

keyboards/ergodox_ez/matrix.c

@@ -1,9 +1,5 @@
 /*
 
-Note for ErgoDox EZ customizers: Here be dragons!
-This is not a file you want to be messing with.
-All of the interesting stuff for you is under keymaps/ :)
-Love, Erez
 
 Copyright 2013 Oleg Kostyuk <[email protected]>
 
@@ -95,7 +91,7 @@ void matrix_init(void) {
   // initialize matrix state: all keys off
   for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
     matrix[i]     = 0;
-    raw_matrix[i] = 0;    
+    raw_matrix[i] = 0;
   }
 
 #ifdef DEBUG_MATRIX_SCAN_RATE
@@ -168,7 +164,7 @@ uint8_t matrix_scan(void) {
 #ifdef LEFT_LEDS
   mcp23018_status = ergodox_left_leds_update();
 #endif  // LEFT_LEDS
-  bool changed = false;  
+  bool changed = false;
   for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
     // select rows from left and right hands
     uint8_t left_index = i;
@@ -178,13 +174,13 @@ uint8_t matrix_scan(void) {
 
     // we don't need a 30us delay anymore, because selecting a
     // left-hand row requires more than 30us for i2c.
-    
+
     changed |= store_raw_matrix_row(left_index);
     changed |= store_raw_matrix_row(right_index);
 
     unselect_rows();
   }
-  
+
   debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
   matrix_scan_quantum();
 

keyboards/ergotaco/matrix.c

@@ -1,8 +1,4 @@
 /*
-Note for ErgoDox EZ customizers: Here be dragons!
-This is not a file you want to be messing with.
-All of the interesting stuff for you is under keymaps/ :)
-Love, Erez
 
 Copyright 2013 Oleg Kostyuk <[email protected]>
 
@@ -226,8 +222,8 @@ uint8_t matrix_scan(void)
     matrix_scan_quantum();
 
 #ifdef DEBUG_MATRIX
-    for (uint8_t c = 0; c < MATRIX_COLS; c++) 
+    for (uint8_t c = 0; c < MATRIX_COLS; c++)
-		for (uint8_t r = 0; r < MATRIX_ROWS; r++) 
+		for (uint8_t r = 0; r < MATRIX_ROWS; r++)
 		  if (matrix_is_on(r, c)) xprintf("r:%d c:%d \n", r, c);
 #endif
 
@@ -324,10 +320,10 @@ static void unselect_rows(void)
 static void select_row(uint8_t row)
 {
     if (row < 6) {
-        // select on mcp23018 
+        // select on mcp23018
         if (mcp23018_status) { // do nothing on error
 			// Read using bitmask
-        } else { // set active row low  : 0 // set other rows hi-Z : 1 
+        } else { // set active row low  : 0 // set other rows hi-Z : 1
             mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
             mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT);                 if (mcp23018_status) goto out;
             mcp23018_status = i2c_write(~(1<<row), ERGODOX_EZ_I2C_TIMEOUT);      		if (mcp23018_status) goto out;

keyboards/foxlab/leaf60/hotswap/config.h

@@ -0,0 +1,229 @@
+/*
+Copyright 2019 Fox Lab
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Fox Lab
+#define PRODUCT         Leaf60 Hotswap
+#define DESCRIPTION     A custom hotswap 60% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D2, D1, D0, D3, D5 }
+#define MATRIX_COL_PINS { F5, F4, F1, F0, B0, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 4
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 8
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/foxlab/leaf60/hotswap/hotswap.c

@@ -0,0 +1,59 @@
+/* Copyright 2019 Fox Lab
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "hotswap.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+  setPinOutput(E6);
+  matrix_init_user();
+}
+/*
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/
+
+void led_set_kb(uint8_t usb_led) {
+  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+    writePinLow(E6);
+  } else {
+    writePinHigh(E6);
+  }
+	led_set_user(usb_led);
+}

keyboards/foxlab/leaf60/hotswap/hotswap.h

@@ -0,0 +1,40 @@
+/* Copyright 2019 Fox Lab
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_60_tsangan_hhkb( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       \
+	K400, K401, K402,                         K407,                   K411, K412, K413  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  KC_NO }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  KC_NO, KC_NO }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  KC_NO }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, KC_NO, K407,  KC_NO, KC_NO, KC_NO, K411,  K412,  K413,  KC_NO }  \
+}

keyboards/foxlab/leaf60/hotswap/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Fox Lab Hotswap Leaf60", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_60_tsangan_hhkb": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}]
+        }
+    }
+}

keyboards/foxlab/leaf60/hotswap/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/foxlab/leaf60/hotswap/keymaps/default/keymap.c

@@ -0,0 +1,46 @@
+/* Copyright 2019 Fox Lab
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_60_tsangan_hhkb(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,  KC_GRV, KC_BSLS,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_RCTL),
+
+	LAYOUT_60_tsangan_hhkb(
+		RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, 
+		KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/foxlab/leaf60/hotswap/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Fox Lab Hotswap Leaf60

keyboards/foxlab/leaf60/hotswap/readme.md

@@ -0,0 +1,13 @@
+# Fox Lab Hotswap Leaf60 
+
+A hotswap, Tsangan-layout, gasket-mount 60% keyboard.
+
+Keyboard Maintainer: [Fox Lab](https://github.com/fox-lab), [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Leaf60 powered by the ATmega32U4  
+Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=99002.0)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make foxlab/leaf60/hotswap:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/foxlab/leaf60/hotswap/rules.mk

@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/foxlab/leaf60/readme.md

@@ -0,0 +1,7 @@
+# Fox Lab Leaf60
+
+The Leaf60 is a 60% gasket mount board sold via [Geekhack Group Buy](https://geekhack.org/index.php?topic=99002.0).
+
+It was available with a universal layout PCB and a hotswap tsangan PCB. 
+
+**Firmware generated for one PCB will not work on the other.**

keyboards/foxlab/leaf60/universal/config.h

@@ -0,0 +1,229 @@
+/*
+Copyright 2019 Fox Lab
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Fox Lab
+#define PRODUCT         Leaf60 Universal
+#define DESCRIPTION     A custom 60% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, F0, F4, F1 }
+#define MATRIX_COL_PINS { B0, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 8
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/foxlab/leaf60/universal/info.json

@@ -0,0 +1,20 @@
+{
+    "keyboard_name": "Fox Lab Leaf60", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
+        },
+        
+        "LAYOUT_60_ansi": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}]
+        },
+
+        "LAYOUT_60_hhkb": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}]
+        }
+    }
+}

keyboards/foxlab/leaf60/universal/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 Fox Lab
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/foxlab/leaf60/universal/keymaps/default/keymap.c

@@ -0,0 +1,46 @@
+/* Copyright 2019 Fox Lab
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_all(
+		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, 
+		KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL),
+
+	LAYOUT_all(
+		RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, 
+		KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/foxlab/leaf60/universal/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Universal Leaf60

keyboards/foxlab/leaf60/universal/readme.md

@@ -0,0 +1,13 @@
+# Fox Lab Leaf60
+
+A 60% gasket sandwich made by Fox Lab.
+
+Keyboard Maintainer: [Fox Lab](https://github.com/fox-lab), [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Leaf60 powered by the ATmega32U4  
+Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=99002.0)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make foxlab/leaf60/universal:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/foxlab/leaf60/universal/rules.mk

@@ -0,0 +1,82 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+LAYOUTS = 60_ansi 60_hhkb

keyboards/foxlab/leaf60/universal/universal.c

@@ -0,0 +1,61 @@
+/* Copyright 2019 Fox Lab
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "universal.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+void matrix_init_kb(void) {
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+  setPinOutput(E6);
+  matrix_init_user();
+}
+
+/*
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+  led_set_user(usb_led);
+}
+
+*/
+
+
+void led_set_kb(uint8_t usb_led) {
+  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+    writePinLow(E6);
+  } else {
+    writePinHigh(E6);
+  }
+	led_set_user(usb_led);
+}

keyboards/foxlab/leaf60/universal/universal.h

@@ -0,0 +1,68 @@
+/* Copyright 2019 Fox Lab
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,       K213,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       \
+	K400, K401, K402,       K404,       K406,       K408,       K410, K411, K412, K413        \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 },  \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  KC_NO }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, K213,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  KC_NO }, \
+	{ K400,  K401,  K402,  KC_NO, K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  KC_NO }  \
+}
+
+#define LAYOUT_60_ansi( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,       K213, \
+	K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,             \
+	K400, K401, K402,             K406,                   K410, K411, K412, K413        \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  KC_NO, K014 },  \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  KC_NO }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, K213,  KC_NO }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO, KC_NO }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413,  KC_NO }  \
+}
+
+#define LAYOUT_60_hhkb( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,       K213,       \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,       \
+	K401, K402,                         K406,                   K410, K411                    \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 },  \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  KC_NO }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, K213,  KC_NO }, \
+	{ K300,  KC_NO, K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313,  KC_NO }, \
+	{ KC_NO, K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, KC_NO, KC_NO }  \
+}

keyboards/georgi/matrix.c

@@ -1,8 +1,4 @@
 /*
-Note for ErgoDox EZ customizers: Here be dragons!
-This is not a file you want to be messing with.
-All of the interesting stuff for you is under keymaps/ :)
-Love, Erez
 
 Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
 
@@ -248,8 +244,8 @@ uint8_t matrix_scan(void)
     matrix_scan_quantum();
 
 #ifdef DEBUG_MATRIX
-    for (uint8_t c = 0; c < MATRIX_COLS; c++) 
+    for (uint8_t c = 0; c < MATRIX_COLS; c++)
-		for (uint8_t r = 0; r < MATRIX_ROWS; r++) 
+		for (uint8_t r = 0; r < MATRIX_ROWS; r++)
 		  if (matrix_is_on(r, c)) xprintf("r:%d c:%d \n", r, c);
 #endif
 
@@ -359,7 +355,7 @@ static void select_row(uint8_t row)
     if (row < 7) {
         // select on mcp23018
         if (mcp23018_status) { // do nothing on error
-        } else { // set active row low  : 0 // set other rows hi-Z : 1 
+        } else { // set active row low  : 0 // set other rows hi-Z : 1
             mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
             mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT);                 if (mcp23018_status) goto out;
             mcp23018_status = i2c_write(0xFF & ~(1<<row), ERGODOX_EZ_I2C_TIMEOUT);      if (mcp23018_status) goto out;

keyboards/gergo/matrix.c

@@ -1,8 +1,4 @@
 /*
-Note for ErgoDox EZ customizers: Here be dragons!
-This is not a file you want to be messing with.
-All of the interesting stuff for you is under keymaps/ :)
-Love, Erez
 
 Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
 

keyboards/halberd/config.h

@@ -1,5 +1,4 @@
-/*
+/* Copyright 2019 ENDO Katsuhiro <[email protected]>
-Copyright 2018 takashiski
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -23,14 +22,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x0000
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    takashiski
+#define MANUFACTURER    Kagizaraya
-#define PRODUCT         hecomi_alpha
+#define PRODUCT         Halberd
-#define DESCRIPTION     asymmetric split keyboard
+#define DESCRIPTION     40% keyboard
 
 /* key matrix size */
-//#define MATRIX_ROWS 5
+#define MATRIX_ROWS 4
-#define MATRIX_ROWS 10
+#define MATRIX_COLS 11
-#define MATRIX_COLS 8
 
 /*
  * Keyboard Matrix Assignments
@@ -42,41 +40,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  *
 */
-#define MATRIX_ROW_PINS { C6,D7,E6,B4,B5 }
+#define MATRIX_ROW_PINS { D6, D4, D5, E6 }
-#define MATRIX_COL_PINS { F4,F5,F6,F7,B1,B3,B2,B6 }
+#define MATRIX_COL_PINS { D7, B4, C7, C6, B6, B5, F7, F6, F5, F4, F1 }
 #define UNUSED_PINS
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-//#define USE_I2C
 
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, an3 define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
- #define RGB_DI_PIN D4
+#define RGB_DI_PIN F0
- #ifdef RGB_DI_PIN
+#ifdef RGB_DI_PIN
-   #define RGBLED_NUM 8
+#define RGBLIGHT_ANIMATIONS
-   #define RGBLIGHT_HUE_STEP 8
+#define RGBLED_NUM 40
-   #define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_HUE_STEP 8
-   #define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_SAT_STEP 8
- /*== or choose animations ==*/
+#define RGBLIGHT_VAL_STEP 8
-   #define RGBLIGHT_EFFECT_BREATHING
+#endif
-   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-   #define RGBLIGHT_EFFECT_SNAKE
-   #define RGBLIGHT_EFFECT_KNIGHT
-   #define RGBLIGHT_EFFECT_CHRISTMAS
-   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-   #define RGBLIGHT_EFFECT_RGB_TEST
-   #define RGBLIGHT_EFFECT_ALTERNATING
- #endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
@@ -129,6 +111,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
+/* key combination for magic key command */
+/*
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+*/
 
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
@@ -238,9 +226,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0
-//
+
-/*
+#define TAPPING_TERM    100
-#define USE_I2C
+
-#define MASTER_LEFT
+
-#define EEHANDS
-*/

keyboards/halberd/halberd.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 ENDO Katsuhiro <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "halberd.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/halberd/halberd.h

@@ -0,0 +1,40 @@
+/* Copyright 2019 ENDO Katsuhiro <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, \
+    K22, K23, K24, K25, K26, K27, K28, K29, K30, K31, K32, \
+              K33, K34, K35, K36, K37, K38, K39   \
+) \
+{ \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K10 }, \
+    { K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K20,   K21 }, \
+    { K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K30,   K31,   K32 }, \
+    { KC_NO, KC_NO, K33,   K34,   K35,   K36,   K37,   K38,   K39,   KC_NO, KC_NO } \
+}
+

keyboards/halberd/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "Halberd", 
+    "url": "", 
+    "maintainer": "ka2hiro", 
+    "width": 11, 
+    "height": 4, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"!", "x":0, "y":0}, {"label":"@", "x":1, "y":0}, {"label":"#", "x":2, "y":0}, {"label":"$", "x":3, "y":0}, {"label":"%", "x":4, "y":0}, {"label":"Tab", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"Tab", "x":0, "y":1}, {"label":"_", "x":1, "y":1}, {"label":"+", "x":2, "y":1}, {"label":"|", "x":3, "y":1}, {"label":"~", "x":4, "y":1}, {"label":"BkSp", "x":5, "y":1}, {"label":":", "x":6, "y":1}, {"label":"\"", "x":7, "y":1}, {"label":">", "x":8, "y":1}, {"label":"{", "x":9, "y":1}, {"label":"}", "x":10, "y":1}, {"label":"Caps", "x":0, "y":2}, {"label":"-", "x":1, "y":2}, {"label":"=", "x":2, "y":2}, {"label":"\\", "x":3, "y":2}, {"label":"`", "x":4, "y":2}, {"label":"Enter", "x":5, "y":2}, {"label":";", "x":6, "y":2}, {"label":"'", "x":7, "y":2}, {"label":"<", "x":8, "y":2}, {"label":"[", "x":9, "y":2}, {"label":"]", "x":10, "y":2}, {"label":"GUI", "x":2, "y":3}, {"label":"Lower", "x":3, "y":3}, {"label":"Esc", "x":4, "y":3}, {"x":5, "y":3}, {"label":"Shift", "x":6, "y":3}, {"label":"Raise", "x":7, "y":3}, {"label":"Alt", "x":8, "y":3}]
+        }
+    }
+}
+

keyboards/halberd/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 ENDO Katsuhiro <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/halberd/keymaps/default/keymap.c

@@ -0,0 +1,160 @@
+/* Copyright 2019 ENDO Katsuhiro <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ *
+ * ,----------------------------------------------------------------------------.
+ * |   Q  |   W  |   E  |   R  |   T  |  Tab |   Y  |   U  |   I  |   O  |   P  |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * |   A  |   S  |   D  |   F  |   G  | BkSp |   H  |   J  |   K  |   L  |   ;  |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * |   Z  |   X  |   C  |   V  |   B  | Enter|   N  |   M  |   ,  |   .  |   /  |
+ * `-------------+------+------+------|------|------+------+------+------+------'
+ *               | GUI  | LOWER|Ctrl/Esc|Space|Shift| RAISE| Alt |
+ *               `------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT(
+  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_TAB,     KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_BSPC,     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,
+  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_ENT,     KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,
+                    KC_LGUI, LOWER, MT(MOD_LCTL, KC_ESC),  KC_SPC, KC_LSFT, RAISE, KC_LALT
+),
+
+/* Raise
+ *
+ * ,----------------------------------------------------------------------------.
+ * |   !  |   @  |   #  |   $  |   %  |      |   ^  |   &  |   *  |   (  |   )  |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * |  Tab |   _  |   +  |  |   |  ~   |      |   :  |   "  |   >  |   {  |   }  |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * |  Caps|   -  |   =  |  \   |  `   |      |   ;  |   '  |   <  |   [  |   ]  |
+ * `-------------+------+------+------|------|------+------+------+------+------'
+ *               |      | LOWER|      |      |  Esc | RAISE|      |
+ *               `------------------------------------------------'
+ */
+[_RAISE] = LAYOUT(
+  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,
+  KC_TAB,  KC_UNDS, KC_PLUS, KC_PIPE, KC_TILD, _______, KC_COLN, KC_DQUO, KC_GT,   KC_LCBR, KC_RCBR,
+  KC_CAPS, KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,  _______, KC_SCLN, KC_QUOT, KC_LT,   KC_LBRC, KC_RBRC,
+                    _______, _______, _______, _______, _______,  _______, _______
+),
+
+/* Lower
+ *
+ * ,----------------------------------------------------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |      |   6  |   7  |   8  |   9  |   0  |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * |  Tab |      |      |      |Enter |      | Left | Down |  Up  | Right| Enter|
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * |  Ctrl|      |  GUI |  Alt | Del  |      | BkSp | PgUp | PgDn |      |      |
+ * `-------------+------+------+------|------|------+------+------+------+------'
+ *               |      | LOWER|      |      |      | RAISE|      |
+ *               `------------------------------------------------'
+ */
+[_LOWER] = LAYOUT(
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+  KC_TAB,  _______, _______, _______, KC_ENT,  _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_ENT,
+  KC_LCTL, _______, KC_LGUI, KC_LALT, KC_DEL,  _______, KC_BSPC, KC_PGUP, KC_PGDN, _______, _______,
+                    _______, _______, _______, _______, _______, _______, _______
+),
+
+
+/* Adjust (Lower + Raise)
+ *
+ * ,----------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |      |   F6 |  F7  |  F8  |  F9  |  F10 |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * |  F11 |  F12 |      |RGBSAI|RGBSAD|      |RGBVAI|RGBVAD|      |      |      |
+ * |------+------+------+------+------|------|------+------+------+------+------|
+ * | Reset|RGBTOG|RGBMOD|RGBHUI|RGBHUD|      | Prev | Next | Vol- | Vol+ | Play |
+ * `-------------+------+------+------|------|------+------+------+------+------'
+ *               |      | LOWER|      |      |      | RAISE|      |
+ *               `------------------------------------------------'
+ */
+[_ADJUST] =  LAYOUT(
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,    _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,
+  KC_F11,  KC_F12,  RGB_RMOD, RGB_SAI, RGB_SAD, _______, RGB_VAI, RGB_VAD, _______, _______, _______,
+  RESET,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD,  _______, KC_MPRV, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY,
+                    _______, _______, _______,  _______, _______,  _______, _______
+)
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        // persistant_default_layer_set(1UL<<_QWERTY);
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/halberd/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for halberd

keyboards/halberd/keymaps/right_modifiers/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 ENDO Katsuhiro <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/halberd/keymaps/right_modifiers/keymap.c

@@ -0,0 +1,160 @@
+/* Copyright 2019 ENDO Katsuhiro <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum layer_names {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ *
+ * ,----------------------------------------------------------------------------.
+ * |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | BkSp |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  | Enter|
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Shift|
+ * `-------------+------+------+------|------+------+------+------+------+------'
+ *               | GUI  | LOWER|Ctrl/Esc|Space| RAISE| Alt | Tab  |
+ *               `------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT(
+  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
+  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,
+                    KC_LGUI, LOWER, MT(MOD_LCTL, KC_ESC),  KC_SPC, RAISE, KC_LALT, KC_TAB
+),
+
+/* Raise
+ *
+ * ,----------------------------------------------------------------------------.
+ * |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |      |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * |  Tab |   _  |   +  |  |   |  ~   |   :  |   "  |   >  |   {  |   }  |      |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * |  Caps|   -  |   =  |  \   |  `   |   ;  |   '  |   <  |   [  |   ]  |      |
+ * `-------------+------+------+------|------+------+------+------+------+------'
+ *               |      |      |      |      |      |      |      |
+ *               `------------------------------------------------'
+ */
+[_RAISE] = LAYOUT( 
+  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+  KC_TAB,  KC_UNDS, KC_PLUS, KC_PIPE, KC_TILD, KC_COLN, KC_DQUO, KC_GT,   KC_LCBR, KC_RCBR, _______,
+  KC_CAPS, KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,  KC_SCLN, KC_QUOT, KC_LT,   KC_LBRC, KC_RBRC, _______,
+                    _______, _______, _______, _______, _______,  _______, _______
+),
+
+/* Lower
+ *
+ * ,----------------------------------------------------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |      |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * |  Tab |      |      |      |Enter | Left | Down |  Up  | Right| Enter|      |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * |  Ctrl|      |  GUI |  Alt | Del  | BkSp | PgUp | PgDn |      |      |      |
+ * `-------------+------+------+------|------+------+------+------+------+------'
+ *               |      |      |      |      |      |      |      |
+ *               `------------------------------------------------'
+ */
+[_LOWER] = LAYOUT(
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+  KC_TAB,  _______, _______, _______, KC_ENT,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_ENT,  _______,
+  KC_LCTL, _______, KC_LGUI, KC_LALT, KC_DEL,  KC_BSPC, KC_PGUP, KC_PGDN, _______, _______, _______,
+                    _______, _______, _______, _______, _______, _______, _______
+),
+
+
+/* Adjust (Lower + Raise)
+ *
+ * ,----------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |   F6 |  F7  |  F8  |  F9  |  F10 |      |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * |  F11 |  F12 |      |RGBSAI|RGBSAD|RGBVAI|RGBVAD|      |      |      |      |
+ * |------+------+------+------+------|------+------+------+------+------|------|
+ * | Reset|RGBTOG|RGBMOD|RGBHUI|RGBHUD| Prev | Next | Vol- | Vol+ | Play |      |
+ * `-------------+------+------+------|------+------+------+------+------+------'
+ *               |      |      |      |      |      |      |      |
+ *               `------------------------------------------------'
+ */
+[_ADJUST] =  LAYOUT(
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,    KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
+  KC_F11,  KC_F12,  RGB_RMOD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______,
+  RESET,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD,  KC_MPRV, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______,
+                    _______, _______, _______,  _______, _______,  _______, _______
+)
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        // persistant_default_layer_set(1UL<<_QWERTY);
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/halberd/keymaps/right_modifiers/readme.md

@@ -0,0 +1,2 @@
+# Modifiers on the right side.
+

keyboards/halberd/readme.md

@@ -0,0 +1,15 @@
+# Halberd
+
+![Halberd](https://i.imgur.com/QabQNPQ.jpg)
+
+40% keyboard.
+
+Keyboard Maintainer: [ka2hiro](https://github.com/ka2hiro) [@ka2hiro](https://twitter.com/ka2hiro)  
+Hardware Supported: Halberd PCB, ATMEGA32U4  
+Hardware Availability: [@kagizaraya](https://twitter.com/kagizaraya)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make halberd:default:dfu
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/halberd/rules.mk

@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/handwired/daishi/config.h

@@ -0,0 +1,61 @@
+/*
+Copyright 2019 Crokto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6D6D
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    MetaMechs
+#define PRODUCT         Daishi
+#define DESCRIPTION     Compact Battlecruiser
+
+/* key matrix size */
+#define MATRIX_ROWS 7
+#define MATRIX_COLS 18
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D6, D7, E0, E1, C0, C1, C2 }
+#define MATRIX_COL_PINS { E6, E7, E3, B0, B1, B2, A6, A5, A4, A3, A2, A1, A0, F7, F6, F5, F4, F3 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Set up rotary encoder */
+#define NUMBER_OF_ENCODERS 1
+#define ENCODERS_PAD_A { F1 }
+#define ENCODERS_PAD_B { F0 }
+#define ENCODER_RESOLUTION 2
+
+/* Set delay for tap_code on rotary encoder */
+#define TAP_CODE_DELAY 10

keyboards/handwired/daishi/daishi.c

@@ -0,0 +1,22 @@
+#include "daishi.h"
+
+void matrix_init_kb(void) {	
+  // put your keyboard start-up code here
+  // runs once when the firmware starts up
+
+  matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+  // put your looping keyboard code here
+  // runs every cycle (a lot)
+
+  matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  // put your per-action keyboard code here
+  // runs for every action, just before processing by the firmware
+
+  return process_record_user(keycode, record);
+}

keyboards/handwired/daishi/daishi.h

@@ -0,0 +1,25 @@
+#pragma once
+
+#include "quantum.h"
+
+#define encoder_update(clockwise) encoder_update_user(uint8_t index, clockwise)
+
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C,      K4E, K4F, K4G, K4H, \
+    K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B,      K5D, K5E, K5F, K5G, K5H, \
+    K60, K61, K62,           K65,                K69, K6A,      K6C, K6D, K6E, K6F, K6G       \
+){ \
+    { K00, K01, K02, K03,   K04,   K05, K06,   K07,   K08,   K09, K0A, K0B,   K0C,   K0D,   K0E, K0F, K0G, K0H   }, \
+    { K10, K11, K12, K13,   K14,   K15, K16,   K17,   K18,   K19, K1A, K1B,   K1C,   K1D,   K1E, K1F, K1G, K1H   }, \
+    { K20, K21, K22, K23,   K24,   K25, K26,   K27,   K28,   K29, K2A, K2B,   K2C,   K2D,   K2E, K2F, K2G, K2H   }, \
+    { K30, K31, K32, K33,   K34,   K35, K36,   K37,   K38,   K39, K3A, K3B,   K3C,   K3D,   K3E, K3F, K3G, K3H   }, \
+    { K40, K41, K42, K43,   K44,   K45, K46,   K47,   K48,   K49, K4A, K4B,   K4C,   KC_NO, K4E, K4F, K4G, K4H   }, \
+    { K50, K51, K52, K53,   K54,   K55, K56,   K57,   K58,   K59, K5A, K5B,   KC_NO, K5D,   K5E, K5F, K5G, K5H   }, \
+    { K60, K61, K62, KC_NO, KC_NO, K65, KC_NO, KC_NO, KC_NO, K69, K6A, KC_NO, K6C,   K6D,   K6E, K6F, K6G, KC_NO }  \
+}

keyboards/handwired/daishi/keymaps/default/keymap.c

@@ -0,0 +1,124 @@
+#include QMK_KEYBOARD_H
+
+// Layer shorthand
+#define _QW 0
+#define _FN 1
+
+enum custom_keycodes {
+    M_EXAMPLE1 = SAFE_RANGE,
+	M_EXAMPLE2,
+	DYNAMIC_MACRO_RANGE,
+};
+
+#include "dynamic_macro.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* QWERTY
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------------------------.
+ * | ESC    |        |        |        |        |        |        |        |        |        | DM1    | DM2    | DMSTOP | PRINT  | SCROLL | PAUSE  | FN     | VOL    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------|
+ * | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | DEL    | HOME   | PGUP   | END    | INS    | NUM    |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------|
+ * | `      | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | =      | BACK   | PGDN   | /      | *      | -      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------|
+ * | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | [      | ]      | \      | 7      | 8      | 9      | +      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------|
+ * | CAPS   | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      | ENTER  |        | 4      | 5      | 6      | =      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------|
+ * | LSHIFT | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | SHIFT  |        | UP     | 1	  | 2      | 3      | ENTER  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------|
+ * | LCTRL  | LGUI   | LALT   |        |        | SPACE  |        |        |        | RALT   | RCTRL  |        | LEFT   | DOWN   | RIGHT  | 0      | .      |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------'
+ */
+
+ [_QW] = LAYOUT( /* QWERTY */
+  KC_ESC , _______, _______, _______, _______, _______, _______, _______, _______, _______,DYN_MACRO_PLAY1,DYN_MACRO_PLAY2,DYN_REC_STOP, KC_PSCR, KC_SLCK, KC_PAUS, MO(_FN), KC_MUTE,
+  KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , KC_DEL , KC_HOME, KC_PGUP, KC_END , KC_INS , KC_NLCK,
+  KC_GRV , KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSPC, KC_PGDN, KC_PSLS, KC_PAST, KC_PMNS,
+  KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSLS, KC_P7  , KC_P8  , KC_P9  , KC_PPLS,
+  KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,          KC_P4  , KC_P5  , KC_P6  , KC_EQL ,
+  KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT,          KC_UP  , KC_P1  , KC_P2  , KC_P3  , KC_PENT,
+  KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC ,                            KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT, KC_P0  , KC_PDOT         
+ ),
+
+/* FN
+ * .-----------------------------------------------------------------------------------------------------------------------------------------------------------------.
+ * | RESET  | F13    | F14    | F15    | f16    | f17    | f18    | F19    | F20    | F21    | DM1 R  | DM2 R  | DMSTOP |        |        |        | FN     | DEBUG  |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------|
+ * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------------------------'
+ */
+ 
+ [_FN] = LAYOUT( /* Function */
+  RESET  , KC_F13 , KC_F14 , KC_F15 , KC_F16 , KC_F17 , KC_F18 , KC_F19 , KC_F20 , KC_F21 ,DYN_REC_START1,DYN_REC_START2,DYN_REC_STOP, _______, _______, _______, MO(_FN), DEBUG,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______,
+  _______, _______,  _______,                  _______,                            _______, _______,          _______, _______, _______, _______, _______         
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	if (!process_record_dynamic_macro(keycode, record)) {
+        return false;
+    }
+    if (record->event.pressed) {
+        switch(keycode) {
+            case M_EXAMPLE1:
+                SEND_STRING("This is an example macro!"SS_TAP(X_ENTER)); //prints "This is an example macro!" and hits Enter
+                return false; 
+            case M_EXAMPLE2:
+                SEND_STRING("This is a another example!"SS_TAP(X_ENTER)); //prints "This is a another example!" and hits Enter
+                return false; 
+        }
+    }
+    return true;
+};
+
+void encoder_update(bool clockwise) {
+ if (clockwise) {
+  tap_code(KC_VOLU);
+ } else {
+  tap_code(KC_VOLD);
+ }
+}
+	
+void matrix_init_user(void) {
+  // Call the keymap level matrix init.
+
+  // Set our LED pins as output
+  setPinOutput(C4);
+  setPinOutput(C5);
+  setPinOutput(C6);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    if (IS_LED_OFF(usb_led, USB_LED_NUM_LOCK)) {
+        writePinLow(C4);
+    } else {
+        writePinHigh(C4);
+    }
+    if (IS_LED_OFF(usb_led, USB_LED_CAPS_LOCK)) {
+        writePinLow(C5);
+    } else {
+        writePinHigh(C5);
+    }
+    if (IS_LED_OFF(usb_led, USB_LED_SCROLL_LOCK)) {
+        writePinLow(C6);
+    } else {
+        writePinHigh(C6);
+    }
+}

keyboards/handwired/daishi/keymaps/default/readme.md

@@ -0,0 +1,5 @@
+# Default Daishi Layout
+
+![Daishi Layout Image](https://i.imgur.com/fuJZGmw.png)
+
+This is the default layout that comes on the Daishi. For more information on the design of this layout, check out [kb.metamechs.com](http://kb.metamechs.com/daishi/).

keyboards/handwired/daishi/readme.md

@@ -0,0 +1,15 @@
+# Daishi
+
+![Daishi](http://kb.metamechs.com/wp-content/uploads/2019/03/IMG_20190325_113405-e1553610532162-1024x709.jpg)
+
+A compact battlecruiser using the CBC1 PCB. [More info on kb.metamechs.com](http://kb.metamechs.com/daishi/)
+
+Keyboard Maintainer: [Crokto](https://github.com/Croktopus/)  
+Hardware Supported: CBC1 PCB  
+Hardware Availability: [kb.metamechs.com](http://kb.metamechs.com/daishi/get-your-own-daishi/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/daishi:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/daishi/rules.mk

@@ -0,0 +1,66 @@
+# MCU name
+MCU = at90usb1286
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+BOOTLOADER = atmel-dfu
+
+# QMK Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+ENCODER_ENABLE = yes		# Add rotary encoder support

keyboards/handwired/frenchdev/matrix.c

@@ -5,11 +5,6 @@ The "column" and "row" in here actually refers to the opposite on the keyboard
 see definition of KEYMAP in v1.h, the grid is transposed so that a "row" in here is actually a "column" on the physical keyboard
 Nicolas
 
-Note for ErgoDox EZ customizers: Here be dragons!
-This is not a file you want to be messing with.
-All of the interesting stuff for you is under keymaps/ :)
-Love, Erez
-
 Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
 Copyright 2013 Nicolas Poirey <nicolas.poirey@gmail.com>
 

keyboards/hecomi/alpha/config.h

@@ -45,7 +45,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { C6,D7,E6,B4,B5 }
 #define MATRIX_COL_PINS { F4,F5,F6,F7,B1,B3,B2,B6 }
 #define UNUSED_PINS
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define SOFT_SERIAL_PIN D1 // or D1, D2, D3, E6
 //#define USE_I2C
 
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
@@ -62,20 +62,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
  #define RGB_DI_PIN D4
  #ifdef RGB_DI_PIN
-   #define RGBLED_NUM 8
+   #define RGBLED_NUM 16 
    #define RGBLIGHT_HUE_STEP 8
    #define RGBLIGHT_SAT_STEP 8
    #define RGBLIGHT_VAL_STEP 8
  /*== or choose animations ==*/
-   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_BREATHING
-   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_SNAKE
-   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_KNIGHT
-   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
-   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_RGB_TEST
-   #define RGBLIGHT_EFFECT_ALTERNATING
+//   #define RGBLIGHT_EFFECT_ALTERNATING
  #endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
@@ -244,3 +244,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MASTER_LEFT
 #define EEHANDS
 */
+#define RGBLED_SPLIT {8,8}

keyboards/hecomi/alpha/rules.mk

@@ -62,8 +62,8 @@ BOOTLOADER = caterina
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = yes        # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
@@ -72,7 +72,7 @@ SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/hecomi/keymaps/default/keymap.c

@@ -39,15 +39,15 @@ enum layers{
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	[DF]=LAYOUT(\
 			KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,                  KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_NUHS,KC_GRV,\
-			KC_TAB  ,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,                 KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_DEL,\
+			KC_TAB  ,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,                 KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSPC,\
 			KC_LCTRL ,KC_A,KC_S,KC_D,KC_F,KC_G,                     KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_ENT,\
 			KC_LSFT   ,KC_Z,KC_X,KC_C,KC_V,KC_B,               KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,KC_FN,\
 			KC_LCTRL,KC_LGUI,KC_LALT,KC_MHEN,KC_BSPC,KC_SPC,  KC_ENT,KC_ESC,KC_HENK,KC_RALT,KC_RGUI,KC_RCTRL\
 			),
 	[FN]=LAYOUT(\
 			KC_ESC,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,                  KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_INS,KC_DEL,\
-			KC_TAB  ,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,                 KC_Y,KC_U,KC_PSCR,KC_SLCK,KC_PAUSE,KC_UP,KC_RBRC,KC_BSPC,\
+			KC_TAB  ,KC_9,KC_7,KC_5,KC_3,KC_1,KC_Y,                 KC_Y,KC_U,KC_PSCR,KC_SLCK,KC_PAUSE,KC_UP,KC_RBRC,KC_BSPC,\
-			KC_CAPS ,KC_A,KC_S,KC_D,KC_F,KC_G,                     KC_SFT(KC_8),KC_SLSH,KC_HOME,KC_PGUP,KC_LEFT,KC_RIGHT,KC_ENT,\
+			KC_CAPS ,KC_8,KC_6,KC_4,KC_2,KC_0,                     KC_SFT(KC_8),KC_SLSH,KC_HOME,KC_PGUP,KC_LEFT,KC_RIGHT,KC_ENT,\
 			KC_LSFT   ,KC_Z,KC_X,KC_C,KC_V,KC_B,               KC_B,KC_SFT(KC_EQL),KC_MINS,KC_END,KC_PGDN,KC_DOWN,KC_RSFT,KC_TRNS,\
 			KC_LCTRL,KC_LGUI,KC_LALT,KC_MHEN,KC_BSPC,KC_SPC,  KC_ENT,KC_ESC,KC_HENK,KC_RALT,KC_RGUI,KC_RCTRL\
 			),
@@ -75,6 +75,23 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   return true;
 }
 
+uint32_t layer_state_set_user(uint32_t state)
+{
+	uint8_t layer=biton32(state);
+	switch(layer)
+	{
+		case DF:
+			rgblight_sethsv_noeeprom(180,255,255);
+			break;
+		case FN:
+			rgblight_sethsv_noeeprom(0,255,255);
+			break;
+		default:
+			break;
+	}
+	return state;
+}
+
 void matrix_init_user(void) {
 
 }

keyboards/kbdfans/kbd67/hotswap/readme.md

@@ -1,4 +1,4 @@
-# hotswap
+# KBD67 hotswap
 
 A 65% hot swap board with blocker and USB Type C port. 
 
@@ -8,6 +8,6 @@ Hardware Availability: [KBDFans](https://kbdfans.cn/products/coming-soon-kbd67-m
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kbd67/hotswap:default
+    make kbdfans/kbd67/hotswap:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/kbd67/readme.md

@@ -1,17 +1,22 @@
 # KBD67
 
-A 65% keyboard sold in two variants. Rev1 was a typical keyboard that had to be soldered together, supporting multiple layouts.
+A 65% keyboard sold in three variants. 
-Months later, a new version with hotswap was sold. **Firmware files from one, will not work on the other.** Please use the `.hex` appropriate for your board.
+1. Rev1: Typical keyboard that had to be soldered together, supporting multiple layouts.
+2. HotSwap: Released in late 2018, Hotswap single layout keyboard. 
+3. Rev2: Released in April/May 2019, the Rev2 also needs to be soldered together and supports multiple layouts. 
 
-The rev1 PCB for the KBD67 is sold under the name "KBD65."
+ **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` appropriate for your board.
+
+The rev1 PCB is sold under the name "KBD65".
 
 Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
-Hardware Supported: KBD67  
+Hardware Supported: KBD67 rev1, rev2, hotswap  
-Hardware Availability: KBDFans
+Hardware Availability: KBDFans  
 
-Make example for this keyboard (after setting up your build environment):
+Make examples for this keyboard (after setting up your build environment):
 
     make kbdfans/kbd67/rev1:default
+    make kbdfans/kbd67/rev2:default
     make kbdfans/kbd67/hotswap:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/kbd67/rev1/readme.md

@@ -1,4 +1,4 @@
-# kbd67
+# KBD67 rev1
 
 65% keyboard with blocker.  
 
@@ -8,6 +8,6 @@ Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming
 
 Make example for this keyboard (after setting up your build environment):
 
-    make kbd67/rev1:default
+    make kbdfans/kbd67/rev1:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/keebio/bdn9/keymaps/mousepad/config.h

@@ -0,0 +1,3 @@
+#define MK_3_SPEED
+#define TERMINAL_HELP
+

keyboards/keebio/bdn9/keymaps/mousepad/keymap.c

@@ -0,0 +1,81 @@
+/* Copyright 2019 Danny Nguyen <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+bool is_alt_tab_active = false;    // ADD this near the begining of keymap.c
+uint16_t alt_tab_timer = 0;        // we will be using them soon.
+
+enum custom_keycodes {             // Make sure have the awesome keycode ready
+  ALT_TAB = SAFE_RANGE,
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_MS_BTN1, KC_MS_BTN2, KC_MS_BTN3, 
+        KC_WH_U, ALT_TAB, KC_WH_L, 
+        KC_WH_D, TT(1), KC_WH_R 
+    ),
+    [1] = LAYOUT(
+        RESET,   KC_ACL0, KC_ACL1, 
+        KC_VOLU, KC_ACL2, KC_BRIU, 
+        KC_VOLD, TO(1),  KC_BRID 
+    ),
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        if (clockwise) {
+            tap_code(KC_MS_LEFT);
+        } else {
+            tap_code(KC_MS_RIGHT);
+        }
+    }
+    else if (index == 1) {
+        if (clockwise) {
+            tap_code(KC_MS_U);
+        } else {
+            tap_code(KC_MS_D);
+        }
+    }
+}
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {               // This will do most of the grunt work with the keycodes.
+    case ALT_TAB:
+      if (record->event.pressed) {
+        if (!is_alt_tab_active) {
+          is_alt_tab_active = true;
+          register_code(KC_LALT);
+        }
+        alt_tab_timer = timer_read();
+        register_code(KC_TAB);
+      } else {
+        unregister_code(KC_TAB);
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_scan_user(void) {     // The very important timer.
+  if (is_alt_tab_active) {
+    if (timer_elapsed(alt_tab_timer) > 1000) {
+      unregister_code(KC_LALT);
+      is_alt_tab_active = false;
+    }
+  }
+}

keyboards/keebio/bdn9/keymaps/mousepad/readme.md

@@ -0,0 +1,16 @@
+# Mousepad layout for BDN9
+##### 2 encoders required
+Why use a movable mouse when you can "Etech-a-sketch" style mousepad. 
+The left encoder will move the X axis; leaving the right to handle the Y axis
+
+|   |   |   |
+|:-:|:-:|:-:|
+| Left Click | Middle Click | Right Click |
+| Scroll Up | Super ALT↯TAB | Scroll Left |
+| Scroll Down | ADJUSTMENT Layer | Scroll Right|
+
+|   |   |   |
+|:-:|:-:|:-:|
+| RESET | Mouse ACL0 | Mouse ACL1 |
+| VOL UP | Mouse ACL2 | Brightness UP |
+| VOL Down | Adjustment Layer OFF | Brightness Down |

keyboards/keebio/bdn9/keymaps/mousepad/rule.mk

@@ -0,0 +1,2 @@
+MOUSEKEY_ENABLE = yes
+TAPDANCE_ENABLE = yes

keyboards/keebio/iris/keymaps/pvinis/config.h

@@ -0,0 +1,24 @@
+#pragma once
+
+
+#ifdef PRODUCT
+  #undef PRODUCT
+  #define PRODUCT Iris Keyboard - pvinis
+#endif
+
+
+// Use I2C or Serial, not both
+#define USE_SERIAL
+// #define USE_I2C
+
+
+// Select hand configuration
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
+
+
+// choose pin to use for audio. c6 is the one iris uses.
+#ifdef AUDIO_ENABLE
+  #define C6_AUDIO
+#endif

keyboards/keebio/iris/keymaps/pvinis/keymap.c

@@ -0,0 +1,120 @@
+// pvinis iris
+// ,-----------------------------.              ,-----------------------------.
+// |    |    |    |    |    |    |              |    |    |    |    |    |    |
+// |----+----+----+----+----+----|              |----+----+----+----+----+----|
+// |    |    |    |    |    |    |              |    |    |    |    |    |    |
+// |----+----+----+----x----x----|              |----x----x----+----+----+----|
+// |    |    |    |    |    |    |              |    |    |    |    |    |    |
+// |----+----+----+----x----x----+----.    ,----|----x----x----+----+----+----|
+// |    |    |    |    |    |    |    |    |    |    |    |    |    |    |    |
+// `-------------------+----+----+----/    \----+----+----+-------------------'
+//                    |    |    |    |      |    |    |    |
+//                    `----+---------'      `--------------'
+
+
+#include QMK_KEYBOARD_H
+#include "pvinis.h"
+//#include "iris.h"
+//#include "action_layer.h"
+//#include "eeconfig.h"
+
+#ifdef AUDIO_ENABLE
+  #include "audio.h"
+#endif
+
+#ifdef AUDIO_ENABLE
+  // #define STARTUP_SONG SONG(SONIC_RING)
+#endif
+
+#ifdef AUDIO_ENABLE
+  float tone_sonic[][2] = SONG(IN_LIKE_FLINT);
+  float tone_1[][2] = SONG(QWERTY_SOUND);
+  float tone_2[][2] = SONG(OLD_SPICE);
+  float tone_3[][2] = SONG(OVERWATCH_THEME);
+  float tone_4[][2] = SONG(QWERTY_SOUND);
+#endif
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  // ,-----------------------------.              ,-----------------------------.
+  // |    |    |    |    |    |QWER|              |    |    |    |    |    |    |
+  // |----+----+----+----+----+----|              |----+----+----+----+----+----|
+  // |Tab |    |    |    |    |CARP|              |    |    |    |    |    |Del |
+  // |----+----+----+----x----x----|              |----x----x----+----+----+----|
+  // |EscC|    |    |    |    |    |              |    |    |    |    |    |Ent |
+  // |----+----+----+----x----x----+----.    ,----|----x----x----+----+----+----|
+  // |LSft|    |    |    |    |    |Home|    |End |    |    |    |    |    |Rsft|
+  // `-------------------+----+----+----/    \----+----+----+-------------------'
+  //                    |Cmd |LOWR|Bspc|      |Spc |RASE|RAlt|
+  //                    `----+---------'      `--------------'
+  [LR_BASE] = LAYOUT_wrapper(
+    _______, _______, _______, _______, _______, QWERTY ,                        _______, _______, _______, _______, _______, _______,
+    KC_TAB , _______, _______, _______, _______, CARPALX,                        _______, _______, _______, _______, _______, KC_DEL ,
+    PV_ESCC, _______, _______, _______, _______, _______,                        _______, _______, _______, _______, _______, KC_ENT ,
+    KC_LSFT, _______, _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______, _______, KC_RSFT,
+                                        KC_LGUI, SYMBOL , KC_BSPC,      KC_SPC , SYSCTL , KC_RALT
+  ),
+
+  // ,-----------------------------.              ,-----------------------------.
+  // |    |       NUMBERS_L        |              |         NUMBERS_R      |    |
+  // |----+----+----+----+----+----|              |----+----+----+----+----+----|
+  // |    |                        |              |                        |    |
+  // |----+                        |              |                        +----|
+  // |    |       QWERTY_L         |              |         QWERTY_R       |    |
+  // |----+                        +----.    ,----|                        +----|
+  // |    |                        |    |    |    |                        |    |
+  // `-------------------+----+----+----/    \----+----+----+-------------------'
+  //                    |    |    |    |      |    |    |    |
+  //                    `----+---------'      `--------------'
+  [LR_QWERTY] = LAYOUT_wrapper(
+    _______, ________________NUMBERS_L__________________,                        ________________NUMBERS_R__________________, _______,
+    _______, _________________QWERTY_L1_________________,                        _________________QWERTY_R1_________________, _______,
+    _______, _____________MOD_QWERTY_L2_________________,                        _____________MOD_QWERTY_R2_________________, _______,
+    _______, _________________QWERTY_L3_________________, _______,      _______, _________________QWERTY_R3_________________, _______,
+                                        _______, _______, _______,      _______, _______, _______
+  ),
+
+  // ,-----------------------------.              ,-----------------------------.
+  // |    |       NUMBERS_L        |              |         NUMBERS_R      |    |
+  // |----+----+----+----+----+----|              |----+----+----+----+----+----|
+  // |    |                        |              |                        |    |
+  // |----+                        |              |                        +----|
+  // |    |      CARPALX_L         |              |        CARPALX_R       |    |
+  // |----+                        +----.    ,----|                        +----|
+  // |    |                        |    |    |    |                        |    |
+  // `-------------------+----+----+----/    \----+----+----+-------------------'
+  //                    |    |    |    |      |    |    |    |
+  //                    `----+---------'      `--------------'
+  [LR_CARPALX] = LAYOUT_wrapper(
+    _______, ________________NUMBERS_L__________________,                        ________________NUMBERS_R__________________, _______,
+    _______, ________________CARPALX_L1_________________,                        ________________CARPALX_R1_________________, _______,
+    _______, ________________CARPALX_L2_________________,                        ________________CARPALX_R2_________________, _______,
+    _______, ________________CARPALX_L3_________________, _______,      _______, ________________CARPALX_R3_________________, _______,
+                                        _______, _______, _______,      _______, _______, _______
+  ),
+
+  [LR_SYMBOL] = LAYOUT_wrapper(
+    KC_F12 , ______________________F_L__________________,                        ______________________F_R__________________, KC_F11 ,
+    _______, _________________SYMBOL_L1_________________,                        _________________SYMBOL_R1_________________, _______,
+    _______, _________________SYMBOL_L2_________________,                        _________________SYMBOL_R2_________________, _______,
+    _______, _________________SYMBOL_L3_________________, _______,      _______, _________________SYMBOL_R3_________________, _______,
+                                        _______, _______, _______,      _______, _______, _______
+  ),
+
+  [LR_SYSCTL] = LAYOUT_wrapper(
+    _______, _______, _______, _______, _______, _______,                        _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______,                        _________________SYSCTL_R1_________________, _______,
+    _______, _______, _______, _______, _______, _______,                        _________________SYSCTL_R2_________________, _______,
+    _______, _______, _______, _______, _______, _______, _______,      _______, _________________SYSCTL_R3_________________, _______,
+                                        _______, _______, _______,      _______, _______, _______
+  ),
+
+  [LR_KBCTL] = LAYOUT_wrapper(
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    XXXXXXX, __________________KBCTL_L1_________________,                        __________________KBCTL_R1_________________, XXXXXXX,
+    XXXXXXX, __________________KBCTL_L2_________________,                        __________________KBCTL_R2_________________, XXXXXXX,
+    BASE   , __________________KBCTL_L3_________________, XXXXXXX,      XXXXXXX, __________________KBCTL_R3_________________, XXXXXXX,
+                                        XXXXXXX, _______, XXXXXXX,      XXXXXXX, _______, XXXXXXX
+  )
+};

keyboards/keebio/iris/keymaps/pvinis/rules.mk

@@ -0,0 +1,2 @@
+AUDIO_ENABLE    = no # off for now
+RGBLIGHT_ENABLE = no # off for now

keyboards/keycapsss/o4l_5x12/config.h

@@ -0,0 +1,43 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x7983
+#define PRODUCT_ID      0x0512
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Keycapsss
+#define PRODUCT         O4L:5x12
+#define DESCRIPTION     A 60 key ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 12
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
+#define MATRIX_COL_PINS { B5, B4, E6, D7, C6, D4, D0, D1, D2, F6, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* WS2812 RGB LED */
+#define RGB_DI_PIN D3
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12    // Number of LEDs
+#define RGBLIGHT_HUE_STEP 4
+#define RGBLIGHT_SAT_STEP 4
+#define RGBLIGHT_VAL_STEP 4
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/keycapsss/o4l_5x12/keymaps/2x2u/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+// place overrides here

keyboards/keycapsss/o4l_5x12/keymaps/2x2u/keymap.c

@@ -0,0 +1,83 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum o4l5x12_layers {
+  _QWERTY,
+  _LOWER
+};
+
+// Layers get their own keys. These are defined to make them not mess up
+// the grid.
+enum o4l5x12_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |   -  |   =  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | ESC  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | BSPC |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | Alt  | GUI  |Lower |    Enter    |    Space    | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_ortho_5x12_2x2u(
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,
+  KC_GESC, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+  KC_LCTL, KC_LALT, KC_LGUI, LOWER,      KC_ENT,           KC_SPC,        KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |      | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |RGBPLA|   {  |   [  |   (  |      |      |   )  |   ]  |   }  |      |      |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |RGBMOD|      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |UGlow | Reset|      |      |             |             | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_ortho_5x12_2x2u(
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______, KC_DEL,
+  RGB_M_P, KC_LCBR, KC_LBRC, KC_LPRN, KC_SLSH, KC_BSLS, KC_RPRN, KC_RBRC, KC_RCBR, _______, _______, KC_PIPE,
+  RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  RGB_TOG, RESET,   _______, _______,     _______,          _______,      KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+        case QWERTY:
+          if (record->event.pressed) {
+            set_single_persistent_default_layer(_QWERTY);
+          }
+          return false;
+          break;
+        case LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+          } else {
+            layer_off(_LOWER);
+          }
+          return false;
+          break;
+      }
+    return true;
+};

keyboards/keycapsss/o4l_5x12/keymaps/default/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+// place overrides here

keyboards/keycapsss/o4l_5x12/keymaps/default/keymap.c

@@ -0,0 +1,140 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum preonic_layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+// Layers get their own keys. These are defined to make them not mess up
+// the grid.
+enum preonic_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty (Preonic Layer Style)
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_ortho_5x12(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+  RGB_TOG, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Lower (Preonic Layer Style)
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_ortho_5x12(
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Raise (Preonic Layer Style)
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_ortho_5x12(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Adjust (Lower + Raise) (Preonic Layer Style)
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|AudOff|AGnorm|AGswap|Qwerty|      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_ortho_5x12(
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  _______, RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL,
+  _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  _______, _______, _______, _______,
+  _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+)
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+        case QWERTY:
+          if (record->event.pressed) {
+            set_single_persistent_default_layer(_QWERTY);
+          }
+          return false;
+          break;
+        case LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case RAISE:
+          if (record->event.pressed) {
+            layer_on(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+      }
+    return true;
+};

keyboards/keycapsss/o4l_5x12/o4l_5x12.c

@@ -0,0 +1 @@
+#include "o4l_5x12.h"

keyboards/keycapsss/o4l_5x12/o4l_5x12.h

@@ -0,0 +1,50 @@
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO
+
+  #define LAYOUT_ortho_5x12( \
+	  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \
+	  k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b \
+  ) \
+  { \
+	  { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+	  { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, }, \
+	  { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+	  { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, }, \
+	  { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b } \
+  }
+
+  #define LAYOUT_ortho_5x12_1x2uC( \
+	  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \
+	  k40, k41, k42, k43, k44,   k45,    k47, k48, k49, k4a, k4b \
+  ) \
+  { \
+	  { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+	  { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, }, \
+	  { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+	  { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, }, \
+	  { k40, k41, k42, k43, k44, k45, XXX, k47, k48, k49, k4a, k4b } \
+  }
+
+    #define LAYOUT_ortho_5x12_2x2u( \
+	  k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	  k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	  k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	  k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \
+	  k40, k41, k42, k43,    k44,     k46,    k48, k49, k4a, k4b \
+  ) \
+  { \
+	  { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+	  { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, }, \
+	  { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+	  { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, }, \
+	  { k40, k41, k42, k43, k44, XXX, k46, XXX, k48, k49, k4a, k4b } \
+  }

keyboards/keycapsss/o4l_5x12/readme.md

@@ -0,0 +1,31 @@
+# O4L 5x12
+
+A ortholinear 5x12 keyboard made and sold by Keycapsss. [More info at Keycapsss.com](https://keycapsss.com).
+
+<img src="https://i.imgur.com/5p8rDme.jpg" height="500px">
+
+## Features:
+
+- MX and Choc switch support
+- RGB Underglow (12x SK6812MINI)
+- USB-C
+- PCB shape, reset button and mounting holes position same as Preonic Rev3
+- Pro Micro as controller
+
+---
+
+- Keyboard Maintainer: BenRoe [Github](https://github.com/BenRoe) / [Twitter](https://twitter.com/ben_roe)  
+- Hardware Supported: Pro Micro  
+- Hardware Availability: [Keycapsss.com](https://keycapsss.com)  
+
+
+
+Make firmware .hex for this keyboard (after setting up your build environment):
+
+    make keycapsss/o4l_5x12:default
+
+Example of flashing this keyboard (or use [QMK Toolbox](https://github.com/qmk/qmk_toolbox)):
+
+    make keycapsss/o4l_5x12:default:avrdude
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/keycapsss/o4l_5x12/rules.mk

@@ -0,0 +1,73 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
+
+LAYOUTS = ortho_5x12

keyboards/lets_split/keymaps/DE_simple/readme.md

@@ -21,15 +21,15 @@ Layout
     `-----------------------------------------------------------------------------------'
     
     
-    Qwerty
+    Lower
     ,-----------------------------------------------------------------------------------.
-    | Esc  |   Q  |   W  |   E  |   R  |   T  |   Z  |   U  |   I  |   O  |   P  | Bksp |
+    |   °  |   !  |   "  |   §  |   $  |   %  |   &  |   /  |   (  |   )  |   =  | Bksp |
     |------+------+------+------+------+-------------+------+------+------+------+------|
-    | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   +  |  #   |
+    | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   @  |   €  |   ü  |   ?  |  ´   |
     |------+------+------+------+------+------|------+------+------+------+------+------|
-    | Shift|   Y  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   -  |Enter |
+    | Shift|  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |   |  |   ö  |   ä  |      |Enter |
     |------+------+------+------+------+------+------+------+------+------+------+------|
-    | Ctrl | Alt  | AltGr| GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+    |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
     `-----------------------------------------------------------------------------------'
     
     

keyboards/nek_type_a/config.h

@@ -0,0 +1,55 @@
+/*
+Copyright 2018 Mike Roberts
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    miker
+#define PRODUCT         nek_type_a
+#define DESCRIPTION     NEK Type A
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 18
+
+/* left columns are all onboard, right columns all on expander */
+#define COL_EXPANDED { false, false, false, false, false, false, false, true, true, true, true, true, true, true, true, true, true, true}
+#define MATRIX_COL_PINS { C6, D7, B5, B6, B7, D6, D3, GPA0, GPA1, GPA2, GPA3, GPA4, GPA5, GPA6, GPA7, GPB0, GPB1, GPB2 }
+#define MATRIX_ROW_PINS { F7, F6, F5, F4, F1, F0 }
+
+#define DIODE_DIRECTION ROW2COL
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+

keyboards/nek_type_a/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 Mike Roberts
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/nek_type_a/keymaps/default/keymap.c

@@ -0,0 +1,39 @@
+/* Copyright 2018 Mike Roberts
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT(
+    KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC__MUTE, KC__VOLDOWN, KC__VOLUP, \
+    KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS, KC_EQUAL, KC_BSPACE, KC_INSERT, KC_HOME, KC_PGUP, \
+    KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRACKET, KC_RBRACKET, KC_BSLASH, KC_DELETE, KC_END, KC_PGDOWN, \
+    KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCOLON, KC_QUOTE, KC_ENTER, \
+    KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLASH, KC_RSHIFT, KC_UP, \
+    KC_LCTRL, KC_LALT, KC_LCMD, KC_SPC, KC_SPC, KC_RCMD, KC_RALT, KC_RCTRL, KC_APP, KC_LEFT, KC_DOWN, KC_RIGHT \
+  ),
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/nek_type_a/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+![NEK Type A Layout](https://i.imgur.com/ElEVvze.png)
+
+# Default NEK Type A Keymap

keyboards/nek_type_a/matrix.c

@@ -0,0 +1,412 @@
+/*
+Copyright 2012-2018 Jun Wako, Jack Humbert, Mike Roberts
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * This matrix.c has been hacked up to support some columns being on an ex pander in ROW2COL mode.
+ * The columns are only ever selected and unselected, never read. Unselecting a single column via the expander is not
+ * implemented because updating one column costs the same as updating all the columns in a bank. Currently both banks
+ * are unselected but two i2c transactions could be removed if we only unselect the the proper half.
+ */
+
+#include <stdint.h>
+#include <stdbool.h>
+#if defined(__AVR__)
+#include <avr/io.h>
+#endif
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "timer.h"
+#include "mcp23017.h"
+#include "outputselect.h"
+
+/* Set 0 if debouncing isn't needed */
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+#if (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+static const bool col_expanded[MATRIX_COLS] = COL_EXPANDED;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    expander_init();
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+void matrix_init(void) {
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        matrix[i] = 0;
+        matrix_debouncing[i] = 0;
+    }
+
+    matrix_init_quantum();
+    set_output(OUTPUT_AUTO);
+}
+
+uint8_t matrix_scan(void)
+{
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+
+#       else
+            read_cols_on_row(matrix, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix, current_col);
+#       endif
+
+    }
+
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+                matrix[i] = matrix_debouncing[i];
+            }
+            debouncing = false;
+        }
+#   endif
+
+    matrix_scan_quantum();
+    return 1;
+}
+
+bool matrix_is_modified(void)
+{
+#if (DEBOUNCING_DELAY > 0)
+    if (debouncing) return false;
+#endif
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+    {
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    if (col_expanded[col])
+    {
+        expander_select(pin);
+    }
+    else
+    {
+        _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+        _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+    }
+}
+
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    if (col_expanded[col])
+    {
+        expander_unselect_all();
+    }
+    else
+    {
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static void unselect_cols(void)
+{
+    expander_unselect_all();
+
+    for(uint8_t col = 0; col < MATRIX_COLS; col++) {
+        uint8_t pin = col_pins[col];
+        if (!col_expanded[col])
+        {
+            _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+            _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+        }
+    }
+}
+
+#endif

keyboards/nek_type_a/mcp23017.c

@@ -0,0 +1,107 @@
+/* Copyright 2018 Mike Roberts
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <stdbool.h>
+#include "action.h"
+#include "lib/lufa/LUFA/Drivers/Peripheral/TWI.h"
+#include "lib/lufa/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.c"
+#include "mcp23017.h"
+#include "debug.h"
+#include "wait.h"
+
+uint8_t bit_for_pin(uint8_t pin);
+
+uint8_t expander_write(uint8_t reg, uint8_t data);
+
+uint8_t expander_read(uint8_t reg, uint8_t *data);
+
+void expander_config(void);
+
+static const char *twi_err_str(uint8_t res) {
+    switch (res) {
+        case TWI_ERROR_NoError:
+            return "OK";
+        case TWI_ERROR_BusFault:
+            return "BUSFAULT";
+        case TWI_ERROR_BusCaptureTimeout:
+            return "BUSTIMEOUT";
+        case TWI_ERROR_SlaveResponseTimeout:
+            return "SLAVETIMEOUT";
+        case TWI_ERROR_SlaveNotReady:
+            return "SLAVENOTREADY";
+        case TWI_ERROR_SlaveNAK:
+            return "SLAVENAK";
+        default:
+            return "UNKNOWN";
+    }
+}
+
+void expander_init(void) {
+    TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 400000));
+}
+
+// set IN and HI
+void expander_unselect_all() {
+    expander_write(EXPANDER_REG_IODIRA, 0xff);
+    expander_write(EXPANDER_REG_IODIRB, 0xff);
+    expander_write(EXPANDER_REG_OLATA, 0xff);
+    expander_write(EXPANDER_REG_OLATB, 0xff);
+    wait_us(EXPANDER_PAUSE);
+}
+
+// set OUT and LOW
+void expander_select(uint8_t pin) {
+    const uint8_t mask = 0xff & ~(1 << bit_for_pin(pin));
+    if (pin < 8) {
+        expander_write(EXPANDER_REG_IODIRA, mask);
+        expander_write(EXPANDER_REG_OLATA, mask);
+    } else {
+        expander_write(EXPANDER_REG_IODIRB, mask);
+        expander_write(EXPANDER_REG_OLATB, mask);
+    }
+    wait_us(EXPANDER_PAUSE);
+}
+
+void expander_config() {
+    // set everything to input
+    expander_write(EXPANDER_REG_IODIRA, 0xff);
+    expander_write(EXPANDER_REG_IODIRB, 0xff);
+
+    // turn on pull-ups
+    expander_write(EXPANDER_REG_GPPUA, 0xff);
+    expander_write(EXPANDER_REG_GPPUB, 0xff);
+
+    // disable interrupts
+    expander_write(EXPANDER_REG_GPINTENA, 0x0);
+    expander_write(EXPANDER_REG_GPINTENB, 0x0);
+
+    // polarity
+    expander_write(EXPANDER_REG_IPOLA, 0x0);
+    expander_write(EXPANDER_REG_IPOLB, 0x0);
+}
+
+uint8_t bit_for_pin(uint8_t pin) {
+    return pin % 8;
+}
+
+uint8_t expander_write(uint8_t reg, unsigned char val) {
+    uint8_t addr = reg;
+    uint8_t result = TWI_WritePacket(EXPANDER_ADDR << 1, I2C_TIMEOUT, &addr, sizeof(addr), &val, sizeof(val));
+    if (result) {
+        xprintf("mcp: set_register %d = %d failed: %s\n", reg, val, twi_err_str(result));
+    }
+    return result == 0;
+}
+

keyboards/nek_type_a/mcp23017.h

@@ -0,0 +1,71 @@
+/* Copyright 2018 Mike Roberts
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef MAP23017_H
+#define MAP23017_H
+
+#define EXPANDER_ADDR 0x27
+#define I2C_TIMEOUT 200 // milliseconds
+#define EXPANDER_PAUSE 0 // microseconds
+
+enum EXPANDER_REGISTERS {
+    EXPANDER_REG_IODIRA = 0x00,
+    EXPANDER_REG_IODIRB = 0x01,
+    EXPANDER_REG_IPOLA = 0x02,
+    EXPANDER_REG_IPOLB = 0x03,
+    EXPANDER_REG_GPINTENA = 0x04,
+    EXPANDER_REG_GPINTENB = 0x05,
+    EXPANDER_REG_DEFVALA = 0x06,
+    EXPANDER_REG_DEFVALB = 0x07,
+    EXPANDER_REG_INTCONA = 0x08,
+    EXPANDER_REG_INTCONB = 0x09,
+    EXPANDER_REG_IOCONA = 0x0A,
+    EXPANDER_REG_IOCONB = 0x0B,
+    EXPANDER_REG_GPPUA = 0x0C,
+    EXPANDER_REG_GPPUB = 0x0D,
+    EXPANDER_REG_INTFA = 0x0E,
+    EXPANDER_REG_INTFB = 0x0F,
+    EXPANDER_REG_INTCAPA = 0x10,
+    EXPANDER_REG_INTCAPB = 0x11,
+    EXPANDER_REG_GPIOA = 0x12,
+    EXPANDER_REG_GPIOB = 0x13,
+    EXPANDER_REG_OLATA = 0x14,
+    EXPANDER_REG_OLATB = 0x15
+};
+
+#define GPA0 0x0
+#define GPA1 0x1
+#define GPA2 0x2
+#define GPA3 0x3
+#define GPA4 0x4
+#define GPA5 0x5
+#define GPA6 0x6
+#define GPA7 0x7
+#define GPB0 0x8
+#define GPB1 0x9
+#define GPB2 0xA
+#define GPB3 0xB
+#define GPB4 0xC
+#define GPB5 0xD
+#define GPB6 0xE
+#define GPB7 0xF
+
+
+void expander_init(void);
+void expander_select(uint8_t pin);
+void expander_unselect(uint8_t pin);
+void expander_unselect_all(void);
+
+#endif

keyboards/nek_type_a/nek_type_a.c

@@ -0,0 +1,43 @@
+/* Copyright 2018 Mike Roberts
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "nek_type_a.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/nek_type_a/nek_type_a.h

@@ -0,0 +1,58 @@
+/* Copyright 2018 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef NEK_TYPE_A_H
+#define NEK_TYPE_A_H
+
+#include "quantum.h"
+#include <stdint.h>
+#include <stdbool.h>
+#include <util/delay.h>
+
+#define I2C_ADDR        0b0100000
+#define I2C_ADDR_WRITE  ( (I2C_ADDR<<1) | I2C_WRITE )
+#define I2C_ADDR_READ   ( (I2C_ADDR<<1) | I2C_READ  )
+#define IODIRA          0x00            // i/o direction register
+#define IODIRB          0x01
+#define GPPUA           0x0C            // GPIO pull-up resistor register
+#define GPPUB           0x0D
+#define GPIOA           0x12            // general purpose i/o port register (write modifies OLAT)
+#define GPIOB           0x13
+#define OLATA           0x14            // output latch register
+#define OLATB           0x15
+
+extern uint8_t expander_status;
+extern uint8_t expander_input_pin_mask;
+extern bool i2c_initialized;
+
+void init_expander(void);
+
+#define LAYOUT( \
+         L12,      L14, L15, L16, L17,   R11, R12, R13, R14, R15, R16, R17, R18, R19, R1A, R1B, \
+    L21, L22, L23, L24, L25, L26, L27,   R21, R22, R23, R24, R25, R26,      R28, R29, R2A, R2B, \
+    L31, L32, L33, L34, L35, L36,        R31, R32, R33, R34, R35, R36, R37, R38, R39, R3A, R3B, \
+    L41, L42, L43, L44, L45, L46,        R41, R42, R43, R44, R45, R46,      R48,                \
+    L51, L52, L53, L54, L55, L56,        R51, R52, R53, R54, R55,           R58,      R5A,      \
+    L61, L62, L63,      L65,             R61,      R63,      R65, R66,      R68, R69, R6A, R6B  \
+) \
+{ \
+    { KC_NO,   L12, KC_NO,   L14,   L15,   L16,   L17,   R11,   R12,   R13,   R14,   R15,   R16,   R17,   R18,   R19,   R1A,   R1B }, \
+    {   L21,   L22,   L23,   L24,   L25,   L26,   L27,   R21,   R22,   R23,   R24,   R25,   R26, KC_NO,   R28,   R29,   R2A,   R2B }, \
+    {   L31,   L32,   L33,   L34,   L35,   L36, KC_NO,   R31,   R32,   R33,   R34,   R35,   R36,   R37,   R38,   R39,   R3A,   R3B }, \
+    {   L41,   L42,   L43,   L44,   L45,   L46, KC_NO,   R41,   R42,   R43,   R44,   R45,   R46, KC_NO,   R48, KC_NO, KC_NO, KC_NO }, \
+    {   L51,   L52,   L53,   L54,   L55,   L56, KC_NO,   R51,   R52,   R53,   R54,   R55, KC_NO, KC_NO,   R58, KC_NO,   R5A, KC_NO }, \
+    {   L61,   L62,   L63, KC_NO,   L65, KC_NO, KC_NO,   R61, KC_NO,   R63, KC_NO,   R65,   R66, KC_NO,   R68,   R69,   R6A,   R6B }, \
+}
+#endif