If RGBLIGHT_EFFECT_BREATHE_CENTER is undefined, use fixed breathe table instead of exp() and sin() (#5484)

* If RGBLIGHT_EFFECT_BREATHE_CENTER is undefined, use fixed breathe table instead of exp() and sin()

* Change rgblight breathing table size to be easily selectable.

add RGBLIGHT_BREATHE_TABLE_SIZE macro for customize breathing effect.

common_features.mk

@@ -105,6 +105,7 @@ endif
 ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
     POST_CONFIG_H += $(QUANTUM_DIR)/rgblight_post_config.h
     OPT_DEFS += -DRGBLIGHT_ENABLE
+    SRC += $(QUANTUM_DIR)/color.c
     SRC += $(QUANTUM_DIR)/rgblight.c
     CIE1931_CURVE = yes
     LED_BREATHING_TABLE = yes

docs/_summary.md

@@ -63,6 +63,7 @@
   * [LED Matrix](feature_led_matrix.md)
   * [Macros](feature_macros.md)
   * [Mouse Keys](feature_mouse_keys.md)
+  * [OLED Driver](feature_oled_driver)
   * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
   * [Pointing Device](feature_pointing_device.md)
   * [PS/2 Mouse](feature_ps2_mouse.md)

docs/feature_rgblight.md

@@ -114,7 +114,7 @@ The following options can be used to tweak the various animations:
 |`RGBLIGHT_EFFECT_RGB_TEST`          |*Not defined*|If defined, enable RGB test animation mode.                                          |
 |`RGBLIGHT_EFFECT_ALTERNATING`       |*Not defined*|If defined, enable alternating animation mode.                                       |
 |`RGBLIGHT_ANIMATIONS`               |*Not defined*|If defined, enables all additional animation modes                                   |
-|`RGBLIGHT_EFFECT_BREATHE_CENTER`    |`1.85`       |Used to calculate the curve for the breathing animation. Valid values are 1.0 to 2.7 |
+|`RGBLIGHT_EFFECT_BREATHE_CENTER`    |*Not defined*|If defined, used to calculate the curve for the breathing animation. Valid values are 1.0 to 2.7 |
 |`RGBLIGHT_EFFECT_BREATHE_MAX`       |`255`        |The maximum brightness for the breathing mode. Valid values are 1 to 255             |
 |`RGBLIGHT_EFFECT_SNAKE_LENGTH`      |`4`          |The number of LEDs to light up for the "Snake" animation                             |
 |`RGBLIGHT_EFFECT_KNIGHT_LENGTH`     |`3`          |The number of LEDs to light up for the "Knight" animation                            |
@@ -145,7 +145,7 @@ const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
 const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31};
 
 // These control which hues are selected for each of the "Static gradient" modes
-const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
+const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64};
 ```
 
 ## Functions

drivers/avr/ws2812.c

@@ -158,7 +158,7 @@ void inline ws2812_setled(int i, uint8_t r, uint8_t g, uint8_t b)
 
 void ws2812_setled_all  (uint8_t r, uint8_t g, uint8_t b)
 {
-  for (int i = 0; i < RGBLED_NUM; i++) {
+  for (int i = 0; i < sizeof(led)/sizeof(led[0]); i++) {
     led[i].r = r;
     led[i].g = g;
     led[i].b = b;

keyboards/bm16s/bm16s.h

@@ -0,0 +1,15 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_ortho_4x4( \
+	K00, K01, K02, K03, \
+	K10, K11, K12, K13, \
+	K20, K21, K22, K23, \
+	K30, K31, K32, K33  \
+) { \
+	{ K00,   K01,   K02,   K03 }, \
+	{ K10,   K11,   K12,   K13 }, \
+	{ K20,   K21,   K22,   K23 }, \
+	{ K30,   K31,   K32,   K33 }  \
+}

keyboards/bm16s/config.h

@@ -0,0 +1,46 @@
+#pragma once
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KPrepublic
+#define PRODUCT         bm16s
+#define DESCRIPTION     KPrepublic bm16s
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 4
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D1, D0, D3, D2 }
+#define MATRIX_COL_PINS { F7, F6, D4, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+    #define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+    #define RGBLIGHT_ANIMATIONS
+    #define RGBLED_NUM 16
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/bm16s/info.json

@@ -0,0 +1,30 @@
+{
+    "keyboard_name": "bm16s",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 4,
+    "height": 4,
+    "layouts": {
+      "LAYOUT_ortho_4x4": {
+        "key_count": 16,
+        "layout": [
+          {"x":0, "y":0},
+          {"x":1, "y":0},
+          {"x":2, "y":0},
+          {"x":3, "y":0},
+          {"x":0, "y":1},
+          {"x":1, "y":1},
+          {"x":2, "y":1},
+          {"x":3, "y":1},
+          {"x":0, "y":2},
+          {"x":1, "y":2},
+          {"x":2, "y":2},
+          {"x":3, "y":2},
+          {"x":0, "y":3},
+          {"x":1, "y":3},
+          {"x":2, "y":3},
+          {"x":3, "y":3}
+        ]
+      }
+    }
+  }

keyboards/bm16s/keymaps/default/keymap.c

@@ -0,0 +1,16 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT_ortho_4x4(
+		KC_KP_7, KC_KP_8, KC_KP_9, MO(1),   \
+		KC_KP_4, KC_KP_5, KC_KP_6, KC_PMNS, \
+		KC_KP_1, KC_KP_2, KC_KP_3, KC_PPLS, \
+		KC_KP_0, KC_PDOT, KC_PCMM, KC_PENT  \
+	),
+	[1] = LAYOUT_ortho_4x4(
+		RESET,   BL_STEP, _______, KC_VOLU, \
+		BL_TOGG, BL_DEC,  BL_INC,  KC_VOLD, \
+		RGB_TOG, RGB_MOD, RGB_HUI, KC_MUTE, \
+		RGB_SAI, RGB_SAD, RGB_HUD, _______  \
+	),
+};

keyboards/bm16s/keymaps/media/keymap.c

@@ -0,0 +1,20 @@
+#include QMK_KEYBOARD_H
+
+#define RGB_BRU RGB_VAI
+#define RGB_BRD RGB_VAD
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT_ortho_4x4(
+		KC_BRIU, _______, _______, KC_VOLU, \
+		KC_BRID, _______, _______, KC_VOLD, \
+		_______, _______, _______, KC_MUTE, \
+		KC_MPRV, KC_MPLY, KC_MNXT, MO(1)    \
+	),
+	[1] = LAYOUT_ortho_4x4(
+		RESET,    _______, _______, _______, \
+		RGB_SPD,  RGB_BRU, RGB_SPI, _______, \
+		RGB_RMOD, RGB_BRD, RGB_MOD, _______, \
+		RGB_TOG,  _______, _______, _______  \
+	),
+};

keyboards/bm16s/readme.md

@@ -0,0 +1,13 @@
+# bm16s
+
+A 16-key macropad, with USB C and per-key RGB backlighting. This is a variant of the BM16A, but with low profile Choc switches.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: The PCBs, controllers supported  
+Hardware Availability: [KPrepublic](https://kprepublic.com/collections/pcb/products/bm16s-16-keys-custom-mechanical-keyboard-pcb-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-switch-leds-choc-switch); [AliExpress](https://www.aliexpress.com/item/bm16s-16-keys-Custom-Mechanical-Keyboard-PCB-plate-programmed-numpad-layouts-qmk-firmware-with-rgb-switch/32999247908.html); [Massdrop](https://www.massdrop.com/buy/78169)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bm16s:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bm16s/rules.mk

@@ -0,0 +1,72 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE  = yes  # Mouse keys
+EXTRAKEY_ENABLE  = yes  # Audio control and System control
+CONSOLE_ENABLE   = no   # Console for debug
+COMMAND_ENABLE   = no   # Commands for debug and configuration
+SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
+NKRO_ENABLE      = yes  # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no   # Enable keyboard backlight functionality
+AUDIO_ENABLE     = no
+RGBLIGHT_ENABLE  = yes
+
+LAYOUTS = ortho_4x4

keyboards/doro67/multi/keymaps/default/readme.md

@@ -1,5 +1,12 @@
 # Default Doro67 ANSI layout.
 
+**THIS IS THE DEFAULT ANSI KEYMAP (AVAILABILITY: CHINA + INTERNATIONAL GB)**
+The "multi" directory includes keymaps for the multi-layout PCB, which supports ANSI, ISO, and multi (split backspace & non-blocker).
+The keymap you choose from the "multi" directory must correspond to the integrated plate option you chose.
+
+The multi-layout PCB and RGB pcb were the only two options available to NON-china buyers.
+If you purchased an RGB PCB, please see the 'rgb' directory.
+
 This is the default ANSI layout that comes flashed on the Doro67 multi PCB with
 the exception of adding backtick as it was not mapped.
 

keyboards/doro67/multi/keymaps/default_iso/readme.md

@@ -1,5 +1,12 @@
 # Default Doro67 ISO layout.
 
+**THIS IS THE DEFAULT ISO KEYMAP (AVAILABILITY: CHINA + INTERNATIONAL GB)**
+The "multi" directory includes keymaps for the multi-layout PCB, which supports ANSI, ISO, and multi (split backspace & non-blocker).
+The keymap you choose from the "multi" directory must correspond to the integrated plate option you chose.
+
+The multi-layout PCB and RGB pcb were the only two options available to NON-china buyers.
+If you purchased an RGB PCB, please see the 'rgb' directory.
+
 This is the default ISO layout that comes flashed on the Doro67 multi PCB with
 the exception of adding backtick and UK ISO specific keycodes as they were not mapped.
 

keyboards/doro67/multi/keymaps/default_multi/readme.md

@@ -1,5 +1,12 @@
 # Default Doro67 Multi layout.
 
+**THIS IS THE DEFAULT MULTI-LAYOUT (SPLIT BACKSPACE) KEYMAP (AVAILABILITY: CHINA + INTERNATIONAL GB)**
+The "multi" directory includes keymaps for the multi-layout PCB, which supports ANSI, ISO, and multi (split backspace & non-blocker).
+The keymap you choose from the "multi" directory must correspond to the integrated plate option you chose.
+
+The multi-layout PCB and RGB pcb were the only two options available to NON-china buyers.
+If you purchased an RGB PCB, please see the 'rgb' directory.
+
 This is the default Multi layout that comes flashed on the Doro67 multi PCB with
 the exception of adding backtick as it was not mapped.
 

keyboards/doro67/multi/readme.md

@@ -2,6 +2,13 @@
 
 65% custom keyboard made by 80ultraman/Alf/Backprop Studios with multiple layout support. Despite the layout options available, layout is dictated by the selected integrated plate.  
 
+**MULTI-LAYOUT PCB (AVAILABILITY: CHINA + INTERNATIONAL GB)**
+The "multi" directory includes keymaps for the multi-layout PCB, which supports ANSI, ISO, and multi (split backspace & non-blocker).
+The keymap you choose from the "multi" directory must correspond to the integrated plate option you chose.
+
+The multi-layout PCB and RGB pcb were the only two options available to NON-china buyers.
+If you purchased an RGB PCB, please see the 'rgb' directory.
+
 Keyboard Maintainer: [ShadeDream](https://github.com/shadedream)  
 Hardware Supported: Doro67 Multi PCB  
 Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=97265.0)

keyboards/doro67/regular/keymaps/default/readme.md

@@ -1 +1,5 @@
 # The default keymap for doro67
+
+**THIS IS THE DEFAULT KEYMAP DIRECTORY (AVAILABILITY: CHINA GB ONLY)**
+If you are a non-china buyer, you probably have the multi PCB or rgb PCB. 
+Please look at the "multi" and "rgb" readme files.

keyboards/doro67/regular/readme.md

@@ -4,6 +4,10 @@
 
 This is not the PCB with RGB support. Do not flash RGB firmware for this board. 
 
+**REGULAR PCB (AVAILABILITY: CHINA GB ONLY)*
+If you are a non-china buyer, you probably have the multi PCB or rgb PCB. 
+Please look at the "multi" and "rgb" readme files.
+
 Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
 Hardware Supported: Doro67 Regular PCB  
 Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=97265.0)

keyboards/doro67/rgb/keymaps/default/readme.md

@@ -1 +1,7 @@
 # The default keymap for rgb
+
+**RGB PCB (AVAILABILITY: CHINA + INTERNATIONAL GB)**
+The "rgb" directory includes the keymap for the RGB PCB.
+
+The multi-layout PCB and RGB pcb were the only two options available to NON-china buyers.
+If you purchased a non-rgb PCB, please see the 'multi' directory.

keyboards/doro67/rgb/readme.md

@@ -4,6 +4,12 @@
 
 Flashing the regular PCB firmware on this board will work, but will disable RGB lighting. 
 
+**THIS IS THE RGB PCB DIRECTORY (AVAILABILITY: CHINA + INTERNATIONAL GB)**
+The "rgb" directory includes the keymap for the RGB PCB.
+
+The multi-layout PCB and RGB pcb were the only two options available to NON-china buyers.
+If you purchased a non-rgb PCB, please see the 'multi' directory.
+
 Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
 Hardware Supported: Doro 67 RGB PCB  
 Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=97265.0)

keyboards/h87a/h87a.h

@@ -1,47 +0,0 @@
-/* Copyright 2018 Josh Hinnebusch
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef H87A_H
-#define H87A_H
-
-#include "quantum.h"
-
-// This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-#define LAYOUT_all(\
-	K000,       K001, K011, K002, K012,    K003, K013, K004, K014,    K015, K006, K016, K007,    K017, K008, K018,  \
-	K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K027,    K037, K028, K038,  \
-	K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056,                K057, K048, K058,  \
-	K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K066, K076,                             \
- 	K080, K090, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K086, K096,                K088,        \
-	K100, K110, K101,                   K113,                   K105, K115, K106, K116,          K117, K108, K118   \
-) { \
-	{ K000,  K001,  K002,  K003,  K004,  KC_NO, K006,  K007,  K008 }, \
-	{ KC_NO, K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018 }, \
-	{ K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028 }, \
-	{ K030,  K031,  K032,  K033,  K034,  K035,  K036,  K037,  K038 }, \
-	{ K040,  K041,  K042,  K043,  K044,  K045,  K046,  KC_NO, K048 }, \
-	{ K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058 }, \
-	{ K060,  K061,  K062,  K063,  K064,  K065,  K066,  KC_NO, KC_NO }, \
-	{ K070,  K071,  K072,  K073,  K074,  K075,  K076,  KC_NO, KC_NO }, \
-	{ K080,  K081,  K082,  K083,  K084,  K085,  K086,  KC_NO, K088 }, \
-	{ K090,  K091,  K092,  K093,  K094,  K095,  K096,  KC_NO, KC_NO }, \
-	{ K100,  K101,  KC_NO, KC_NO, KC_NO, K105,  K106,  KC_NO, K108 }, \
-	{ K110,  KC_NO, KC_NO, K113,  KC_NO, K115,  K116,  K117,  K118 }  \
-}
-
-#endif

keyboards/h87a/info.json

@@ -1,12 +0,0 @@
-{
-    "keyboard_name": "h87a", 
-    "url": "", 
-    "maintainer": "hineybush", 
-    "width": 18.25, 
-    "height": 6.5, 
-    "layouts": {
-        "LAYOUT_all": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":3.5, "w":1.25}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
-        }
-    }
-}

keyboards/hineybush/h87a/config.h

@@ -72,4 +72,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_SLEEP // RGB will turn off when PC is put to sleep
 #endif

keyboards/hineybush/h87a/h87a.h

@@ -0,0 +1,90 @@
+/* Copyright 2018 Josh Hinnebusch
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_all(\
+	K000,       K001, K011, K002, K012,    K003, K013, K004, K014,    K015, K006, K016, K007,    K017, K008, K018,  \
+	K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K027,    K037, K028, K038,  \
+	K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056,          K057, K048, K058,  \
+	K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K066, K076,                             \
+ 	K080, K090, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K086, K096,                K088,        \
+	K100, K110, K101,                   K113,                   K105, K115, K106, K116,          K117, K108, K118   \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  KC_NO, K006,  K007,  K008 }, \
+	{ KC_NO, K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018 }, \
+	{ K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028 }, \
+	{ K030,  K031,  K032,  K033,  K034,  K035,  K036,  K037,  K038 }, \
+	{ K040,  K041,  K042,  K043,  K044,  K045,  K046,  KC_NO, K048 }, \
+	{ K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058 }, \
+	{ K060,  K061,  K062,  K063,  K064,  K065,  K066,  KC_NO, KC_NO }, \
+	{ K070,  K071,  K072,  K073,  K074,  K075,  K076,  KC_NO, KC_NO }, \
+	{ K080,  K081,  K082,  K083,  K084,  K085,  K086,  KC_NO, K088 }, \
+	{ K090,  K091,  K092,  K093,  K094,  K095,  K096,  KC_NO, KC_NO }, \
+	{ K100,  K101,  KC_NO, KC_NO, KC_NO, K105,  K106,  KC_NO, K108 }, \
+	{ K110,  KC_NO, KC_NO, K113,  KC_NO, K115,  K116,  K117,  K118 }  \
+}
+
+
+#define LAYOUT_tkl_ansi(\
+	K000,       K001, K011, K002, K012,    K003, K013, K004, K014,    K015, K006, K016, K007,    K017, K008, K018,  \
+	K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K027,          K037, K028, K038,  \
+	K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056,          K057, K048, K058,  \
+	K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075,  K076,                                  \
+ 	K080,     K081, K091, K082, K092, K083, K093, K084, K094, K085, K095,      K086,                   K088,        \
+	K100, K110, K101,                   K113,                   K105, K115, K106, K116,          K117, K108, K118   \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  KC_NO, K006,  K007,  K008 }, \
+	{ KC_NO, K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018 }, \
+	{ K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028 }, \
+	{ K030,  K031,  K032,  K033,  K034,  K035, KC_NO,  K037,  K038 }, \
+	{ K040,  K041,  K042,  K043,  K044,  K045,  K046,  KC_NO, K048 }, \
+	{ K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058 }, \
+	{ K060,  K061,  K062,  K063,  K064,  K065, KC_NO,  KC_NO, KC_NO }, \
+	{ K070,  K071,  K072,  K073,  K074,  K075,  K076,  KC_NO, KC_NO }, \
+	{ K080,  K081,  K082,  K083,  K084,  K085,  K086,  KC_NO, K088 }, \
+	{KC_NO,  K091,  K092,  K093,  K094,  K095, KC_NO,  KC_NO, KC_NO }, \
+	{ K100,  K101,  KC_NO, KC_NO, KC_NO, K105,  K106,  KC_NO, K108 }, \
+	{ K110,  KC_NO, KC_NO, K113,  KC_NO, K115,  K116,  K117,  K118 }  \
+}
+
+#define LAYOUT_tkl_ansi_wkl(\
+	K000,       K001, K011, K002, K012,    K003, K013, K004, K014,    K015, K006, K016, K007,    K017, K008, K018,  \
+	K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K027,          K037, K028, K038,  \
+	K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056,          K057, K048, K058,  \
+	K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075,  K076,                                  \
+ 	K080,     K081, K091, K082, K092, K083, K093, K084, K094, K085, K095,      K086,                   K088,        \
+	K100,       K101,                   K113,                         K115,       K116,          K117, K108, K118   \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  KC_NO, K006,  K007,  K008 }, \
+	{ KC_NO, K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018 }, \
+	{ K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028 }, \
+	{ K030,  K031,  K032,  K033,  K034,  K035, KC_NO,  K037,  K038 }, \
+	{ K040,  K041,  K042,  K043,  K044,  K045,  K046,  KC_NO, K048 }, \
+	{ K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058 }, \
+	{ K060,  K061,  K062,  K063,  K064,  K065, KC_NO,  KC_NO, KC_NO }, \
+	{ K070,  K071,  K072,  K073,  K074,  K075,  K076,  KC_NO, KC_NO }, \
+	{ K080,  K081,  K082,  K083,  K084,  K085,  K086,  KC_NO, K088 }, \
+	{KC_NO,  K091,  K092,  K093,  K094,  K095, KC_NO,  KC_NO, KC_NO }, \
+	{ K100,  K101,  KC_NO, KC_NO, KC_NO,KC_NO, KC_NO,  KC_NO, K108 }, \
+	{KC_NO,  KC_NO, KC_NO, K113,  KC_NO, K115,  K116,  K117,  K118 }  \
+}
+

keyboards/hineybush/h87a/info.json

@@ -0,0 +1,20 @@
+{
+    "keyboard_name": "h87a",
+    "url": "",
+    "maintainer": "hineybush",
+    "width": 18.25,
+    "height": 6.5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"x":13, "y":1.5}, {"label":"Bksp", "x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":3.5, "w":1.25}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+        },
+
+        "LAYOUT_tkl_ansi": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Bksp", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+        },
+        "LAYOUT_tkl_ansi_wkl": {
+           "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Bksp", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":7}, {"label":"Alt", "x":11, "y":5.5, "w":1.5}, {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}]
+       }
+    }
+}
+

keyboards/hineybush/h87a/keymaps/default/config.h

@@ -0,0 +1,21 @@
+/* Copyright 2018 Josh Hinnebusch
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+
+// place overrides here
+

keyboards/hineybush/h87a/keymaps/default/keymap.c

@@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     KC_MINS,    KC_EQL,     KC_BSPC,   KC_BSPC,      KC_INS,  KC_HOME, KC_PGUP,
     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC,    KC_RBRC,    KC_BSLS,                 KC_DEL,  KC_END,  KC_PGDN,
     KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT,    KC_NUHS,    KC_ENT,
-    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,   KC_SLSH,    KC_LSFT,    KC_TRNS,                          KC_UP,
+    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,   KC_SLSH,    KC_RSFT,    KC_TRNS,                          KC_UP,
     KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                      KC_RALT,  KC_RGUI,    MO(1),      KC_RCTL,                 KC_LEFT, KC_DOWN, KC_RGHT),
 
   [1] = LAYOUT_all(

keyboards/hineybush/h87a/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for h87a

keyboards/hineybush/h87a/keymaps/wkl/config.h

@@ -0,0 +1,21 @@
+/* Copyright 2018 Josh Hinnebusch
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+
+// place overrides here
+

keyboards/hineybush/h87a/keymaps/wkl/keymap.c

@@ -0,0 +1,73 @@
+/* Copyright 2018 Josh Hinnebusch
+
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [0] = LAYOUT_tkl_ansi_wkl(
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,    KC_F10,     KC_F11,     KC_F12,                  KC_PSCR, KC_SLCK, KC_PAUS,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     KC_MINS,    KC_EQL,     KC_BSPC,                 KC_INS,  KC_HOME, KC_PGUP,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC,    KC_RBRC,    KC_BSLS,                 KC_DEL,  KC_END,  KC_PGDN,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT,                KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,  KC_RSFT,                                                  KC_UP,
+    KC_LCTL, KC_LALT,                   KC_SPC,                                      MO(1),             KC_RCTL,                                         KC_LEFT, KC_DOWN, KC_RGHT),
+
+  [1] = LAYOUT_tkl_ansi_wkl(
+    KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,      RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI,     RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI,               BL_TOGG, BL_DEC,  BL_INC,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,               KC_TRNS, KC_TRNS, KC_VOLU,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,               KC_MPLY, KC_MNXT, KC_VOLD,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                                   KC_TRNS, 
+    KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS,          KC_TRNS,                                          KC_TRNS, KC_TRNS, KC_TRNS ),
+
+};
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_init_ports(void) {
+  setPinOutput(D5);
+  setPinOutput(E6);
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+    setPinOutput(D5);
+    writePinLow(D5);
+  } else {
+    setPinInput(D5);
+    writePinLow(D5);
+  }
+
+  if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+    setPinOutput(E6);
+    writePinLow(E6);
+  } else {
+    setPinInput(E6);
+    writePinLow(E6);
+  }
+
+}

keyboards/hineybush/h87a/keymaps/wkl/readme.md

@@ -0,0 +1 @@
+# The default keymap for h87a

keyboards/hineybush/h87a/readme.md

@@ -3,16 +3,16 @@ h87a
 
 A QMK-powered replacement PCB for custom TKL keyboards. This PCB has the same size of the b.87 PCB, while using the USB port placement and spacebar stabilizer orientation as the a.87 PCB.
 
-Keyboard Maintainer: hineybush (Josh Hinnebusch)  
+Keyboard Maintainer: [hineybush](https://github.com/hineybush)  
-
+Hardware Supported: h87a ver. 1.5, ver. 1.6 (normal and thin), h87alps  
-Hardware Supported: h87a Rev 1  
+Hardware Availability: hineybush.com
-
-Hardware Availability: Currently prototyped, group buy TBD  
 
 Make example for this keyboard (after setting up your build environment):
      
-     make h87a:default
+     make hineybush/h87a:default
    
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
 ## h87a hardware information
 
 Controller: Atmega32u4
@@ -35,8 +35,11 @@ The H87a PCB utilizes duplex matrix organization.
     Backlight Pin: B7
     RGB Data Pin: D3
     
+
+
+For ver 1.5 in-switch indicators:
 To connect the Caps Lock LED to the main backlight matrix, jump the middle pad and the left pad on J1. To use the Caps Lock LED as an indicator, jump the middle pad and the right pad on J1.
 
 To connect the Scroll Lock LED to the main backlight matrix, jump the middle pad and the right pad on J2. To use the Scroll Lock LED as an indicator, jump the middle pad and the left pad on J2.
 
-Note: The different orientations of J1 and J2 will be fixed with Rev 2.
+Note: The different orientations of J1 and J2 was fixed with ver. 1.6.

keyboards/hineybush/hineyg80/config.h

@@ -0,0 +1,47 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    hineybush
+#define PRODUCT         hineyG80
+#define DESCRIPTION     QMK-powered PCB for Cherry G80/81-1800 Boards
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 9
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B2, B3, D0, B1, D2, D1, D5, D3, D6, D4, B4, D7 }
+#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, B7, B0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+

keyboards/hineybush/hineyg80/hineyg80.c

@@ -0,0 +1,63 @@
+/* Copyright 2019 Josh Hinnebusch
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "hineyg80.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+	if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+        // Turn numlock on
+		writePinHigh(C6);
+    } else {
+        // Turn numlock off
+	    writePinLow(C6);
+    }
+	if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+		writePinHigh(B6);
+    } else {
+        // Turn capslock off
+		writePinLow(B6);
+    }
+	if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+        // Turn scrolllock on
+	    writePinHigh(B5);
+    } else {
+        // Turn scrolllock off
+		writePinLow(B5);
+    }
+	led_set_user(usb_led);
+}

keyboards/hineybush/hineyg80/hineyg80.h

@@ -0,0 +1,89 @@
+/* Copyright 2019 Josh Hinnebusch
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    K000,K010,K001,K011,K002,K012,K003,K013,K004,K014,K005,K015,K006,         K007,K017,K008,K018, \
+																		      K027,K016,K028,K038, \
+	K020,K030,K021,K031,K022,K032,K023,K033,K024,K034,K025,K035,K026,K036,K037,K047,K057,K048,K058, \
+	K040,K050,K041,K051,K042,K052,K043,K053,K044,K054,K045,K055,K046,K056,    K067,K077,K068,K078, \
+	K060,K070,K061,K071,K062,K072,K063,K073,K064,K074,K065,K075,K066,K076,    K087,K097,K088,K098, \
+	K080,K090,K081,K091,K082,K092,K083,K093,K084,K094,K085,K095,K086,K096,    K106,K116,K108,K118, \
+	K100,K110,K101,     		K102,            K112,K103,K113,K104,K114,    K105,K115,K117,K107  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008 }, \
+	{ K010,  K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018 }, \
+	{ K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028 }, \
+	{ K030,  K031,  K032,  K033,  K034,  K035,  K036,  K037,  K038 }, \
+	{ K040,  K041,  K042,  K043,  K044,  K045,  K046,  K047,  K048 }, \
+	{ K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058 }, \
+	{ K060,  K061,  K062,  K063,  K064,  K065,  K066,  K067,  K068 }, \
+	{ K070,  K071,  K072,  K073,  K074,  K075,  K076,  K077,  K078 }, \
+	{ K080,  K081,  K082,  K083,  K084,  K085,  K086,  K087,  K088 }, \
+	{ K090,  K091,  K092,  K093,  K094,  K095,  K096,  K097,  K098 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108 }, \
+	{ K110,  KC_NO, K112,  K113,  K114,  K115,  K116,  K117,  K118 }  \
+}
+
+/* 6U spacebar, 1U mods */
+#define LAYOUT_ansi_100u_mods( \
+    K000,K010,K001,K011,K002,K012,K003,K013,K004,K014,K005,K015,K006,     K007,K017,K008,K018, \
+																		  K027,K016,K028,K038, \
+	K020,K030,K021,K031,K022,K032,K023,K033,K024,K034,K025,K035,K026,K036,K047,K057,K048,K058, \
+	K040,K050,K041,K051,K042,K052,K043,K053,K044,K054,K045,K055,K046,K056,K067,K077,K068,K078, \
+	K060,K070,K061,K071,K062,K072,K063,K073,K064,K074,K065,K075,     K076,K087,K097,K088,K098, \
+	K080     ,K081,K091,K082,K092,K083,K093,K084,K094,K085,K095,K086,K096,K106,K116,K108,K118, \
+	K100,K110,K101,     		K102,            K112,K103,K113,K104,K114,K105,K115,K117,K107  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008 }, \
+	{ K010,  K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018 }, \
+	{ K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028 }, \
+	{ K030,  K031,  K032,  K033,  K034,  K035,  K036, KC_NO,  K038 }, \
+	{ K040,  K041,  K042,  K043,  K044,  K045,  K046,  K047,  K048 }, \
+	{ K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058 }, \
+	{ K060,  K061,  K062,  K063,  K064,  K065, KC_NO,  K067,  K068 }, \
+	{ K070,  K071,  K072,  K073,  K074,  K075,  K076,  K077,  K078 }, \
+	{ K080,  K081,  K082,  K083,  K084,  K085,  K086,  K087,  K088 }, \
+	{KC_NO,  K091,  K092,  K093,  K094,  K095,  K096,  K097,  K098 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108 }, \
+	{ K110,  KC_NO, K112,  K113,  K114,  K115,  K116,  K117,  K118 }  \
+}
+
+/* 7U spacebar, 1.5U mods */
+#define LAYOUT_ansi_150u_mods( \
+    K000,K010,K001,K011,K002,K012,K003,K013,K004,K014,K005,K015,K006,     K007,K017,K008,K018, \
+																		  K027,K016,K028,K038, \
+	K020,K030,K021,K031,K022,K032,K023,K033,K024,K034,K025,K035,K026,K036,K047,K057,K048,K058, \
+	K040,K050,K041,K051,K042,K052,K043,K053,K044,K054,K045,K055,K046,K056,K067,K077,K068,K078, \
+	K060,K070,K061,K071,K062,K072,K063,K073,K064,K074,K065,K075     ,K076,K087,K097,K088,K098, \
+	K080     ,K081,K091,K082,K092,K083,K093,K084,K094,K085,K095,K086,K096,K106,K116,K108,K118, \
+	K100,      K101,     		K102,                 K103,     K104,K114,K105,K115,K117,K107  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008 }, \
+	{ K010,  K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018 }, \
+	{ K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028 }, \
+	{ K030,  K031,  K032,  K033,  K034,  K035,  K036, KC_NO,  K038 }, \
+	{ K040,  K041,  K042,  K043,  K044,  K045,  K046,  K047,  K048 }, \
+	{ K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058 }, \
+	{ K060,  K061,  K062,  K063,  K064,  K065, KC_NO,  K067,  K068 }, \
+	{ K070,  K071,  K072,  K073,  K074,  K075,  K076,  K077,  K078 }, \
+	{ K080,  K081,  K082,  K083,  K084,  K085,  K086,  K087,  K088 }, \
+	{KC_NO,  K091,  K092,  K093,  K094,  K095,  K096,  K097,  K098 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108 }, \
+	{ KC_NO, KC_NO, KC_NO, KC_NO, K114,  K115,  K116,  K117,  K118 }  \
+}

keyboards/hineybush/hineyg80/info.json

@@ -0,0 +1,19 @@
+{
+    "keyboard_name": "hineyg80", 
+    "url": "", 
+    "maintainer": "hineybush", 
+    "width": 19.5, 
+    "height": 7.25, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Pause", "x":15.5, "y":0}, {"label":"Insert", "x":16.5, "y":0}, {"label":"Home", "x":17.5, "y":0}, {"label":"PgUp", "x":18.5, "y":0}, {"label":"Scroll Lock", "x":15.5, "y":1}, {"label":"Delete", "x":16.5, "y":1}, {"label":"End", "x":17.5, "y":1}, {"label":"PgDn", "x":18.5, "y":1}, {"label":"~", "x":0, "y":2}, {"label":"!", "x":1, "y":2}, {"label":"@", "x":2, "y":2}, {"label":"#", "x":3, "y":2}, {"label":"$", "x":4, "y":2}, {"label":"%", "x":5, "y":2}, {"label":"^", "x":6, "y":2}, {"label":"&", "x":7, "y":2}, {"label":"*", "x":8, "y":2}, {"label":"(", "x":9, "y":2}, {"label":")", "x":10, "y":2}, {"label":"_", "x":11, "y":2}, {"label":"+", "x":12, "y":2}, {"label":"Bksp", "x":13, "y":2}, {"x":14, "y":2}, {"label":"Num Lock", "x":15.5, "y":2}, {"label":"/", "x":16.5, "y":2}, {"label":"*", "x":17.5, "y":2}, {"label":"-", "x":18.5, "y":2}, {"label":"Tab", "x":0, "y":3, "w":1.5}, {"label":"Q", "x":1.5, "y":3}, {"label":"W", "x":2.5, "y":3}, {"label":"E", "x":3.5, "y":3}, {"label":"R", "x":4.5, "y":3}, {"label":"T", "x":5.5, "y":3}, {"label":"Y", "x":6.5, "y":3}, {"label":"U", "x":7.5, "y":3}, {"label":"I", "x":8.5, "y":3}, {"label":"O", "x":9.5, "y":3}, {"label":"P", "x":10.5, "y":3}, {"label":"{", "x":11.5, "y":3}, {"label":"}", "x":12.5, "y":3}, {"label":"|", "x":13.5, "y":3, "w":1.5}, {"label":"7", "x":15.5, "y":3}, {"label":"8", "x":16.5, "y":3}, {"label":"9", "x":17.5, "y":3}, {"label":"+", "x":18.5, "y":3}, {"label":"Caps Lock", "x":0, "y":4, "w":1.75}, {"label":"A", "x":1.75, "y":4}, {"label":"S", "x":2.75, "y":4}, {"label":"D", "x":3.75, "y":4}, {"label":"F", "x":4.75, "y":4}, {"label":"G", "x":5.75, "y":4}, {"label":"H", "x":6.75, "y":4}, {"label":"J", "x":7.75, "y":4}, {"label":"K", "x":8.75, "y":4}, {"label":"L", "x":9.75, "y":4}, {"label":":", "x":10.75, "y":4}, {"label":"\"", "x":11.75, "y":4}, {"x":12.75, "y":4}, {"label":"Enter", "x":13.75, "y":4, "w":1.25}, {"label":"4", "x":15.5, "y":4}, {"label":"5", "x":16.5, "y":4}, {"label":"6", "x":17.5, "y":4}, {"x":18.5, "y":4}, {"label":"Shift", "x":0, "y":5, "w":1.25}, {"x":1.25, "y":5}, {"label":"Z", "x":2.25, "y":5}, {"label":"X", "x":3.25, "y":5}, {"label":"C", "x":4.25, "y":5}, {"label":"V", "x":5.25, "y":5}, {"label":"B", "x":6.25, "y":5}, {"label":"N", "x":7.25, "y":5}, {"label":"M", "x":8.25, "y":5}, {"label":"<", "x":9.25, "y":5}, {"label":">", "x":10.25, "y":5}, {"label":"?", "x":11.25, "y":5}, {"label":"Shift", "x":12.25, "y":5, "w":1.75}, {"label":"\u2191", "x":14.25, "y":5.25}, {"label":"1", "x":15.5, "y":5}, {"label":"2", "x":16.5, "y":5}, {"label":"3", "x":17.5, "y":5}, {"label":"Enter", "x":18.5, "y":5, "h":2}, {"label":"Ctrl", "x":0, "y":6}, {"label":"Win", "x":1, "y":6}, {"label":"Alt", "x":2, "y":6}, {"x":3, "y":6, "w":6}, {"label":"Alt", "x":9, "y":6}, {"label":"Win", "x":10, "y":6}, {"label":"Menu", "x":11, "y":6}, {"label":"Ctrl", "x":12, "y":6}, {"label":"\u2190", "x":13.25, "y":6.25}, {"label":"\u2193", "x":14.25, "y":6.25}, {"label":"\u2192", "x":15.25, "y":6.25}, {"label":"0", "x":16.5, "y":6}, {"label":".", "x":17.5, "y":6}]
+        },
+        "LAYOUT_ansi_100u_mods": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Insert", "x":15.5, "y":0}, {"label":"Home", "x":16.5, "y":0}, {"label":"PgUp", "x":17.5, "y":0}, {"label":"Prt Sc", "x":18.5, "y":0}, {"label":"Delete", "x":15.5, "y":1}, {"label":"End", "x":16.5, "y":1}, {"label":"PgDn", "x":17.5, "y":1}, {"label":"Scroll", "x":18.5, "y":1}, {"label":"~", "x":0, "y":2}, {"label":"!", "x":1, "y":2}, {"label":"@", "x":2, "y":2}, {"label":"#", "x":3, "y":2}, {"label":"$", "x":4, "y":2}, {"label":"%", "x":5, "y":2}, {"label":"^", "x":6, "y":2}, {"label":"&", "x":7, "y":2}, {"label":"*", "x":8, "y":2}, {"label":"(", "x":9, "y":2}, {"label":")", "x":10, "y":2}, {"label":"_", "x":11, "y":2}, {"label":"+", "x":12, "y":2}, {"label":"Backspace", "x":13, "y":2, "w":2}, {"label":"Num Lock", "x":15.5, "y":2}, {"label":"/", "x":16.5, "y":2}, {"label":"*", "x":17.5, "y":2}, {"label":"Pause", "x":18.5, "y":2}, {"label":"Tab", "x":0, "y":3, "w":1.5}, {"label":"Q", "x":1.5, "y":3}, {"label":"W", "x":2.5, "y":3}, {"label":"E", "x":3.5, "y":3}, {"label":"R", "x":4.5, "y":3}, {"label":"T", "x":5.5, "y":3}, {"label":"Y", "x":6.5, "y":3}, {"label":"U", "x":7.5, "y":3}, {"label":"I", "x":8.5, "y":3}, {"label":"O", "x":9.5, "y":3}, {"label":"P", "x":10.5, "y":3}, {"label":"{", "x":11.5, "y":3}, {"label":"}", "x":12.5, "y":3}, {"label":"|", "x":13.5, "y":3, "w":1.5}, {"label":"7", "x":15.5, "y":3}, {"label":"8", "x":16.5, "y":3}, {"label":"9", "x":17.5, "y":3}, {"label":"-", "x":18.5, "y":3}, {"label":"Caps Lock", "x":0, "y":4, "w":1.75}, {"label":"A", "x":1.75, "y":4}, {"label":"S", "x":2.75, "y":4}, {"label":"D", "x":3.75, "y":4}, {"label":"F", "x":4.75, "y":4}, {"label":"G", "x":5.75, "y":4}, {"label":"H", "x":6.75, "y":4}, {"label":"J", "x":7.75, "y":4}, {"label":"K", "x":8.75, "y":4}, {"label":"L", "x":9.75, "y":4}, {"label":":", "x":10.75, "y":4}, {"label":"\"", "x":11.75, "y":4}, {"label":"Enter", "x":12.75, "y":4, "w":2.25}, {"label":"4", "x":15.5, "y":4}, {"label":"5", "x":16.5, "y":4}, {"label":"6", "x":17.5, "y":4}, {"label":"+", "x":18.5, "y":4}, {"label":"Shift", "x":0, "y":5, "w":2.25}, {"label":"Z", "x":2.25, "y":5}, {"label":"X", "x":3.25, "y":5}, {"label":"C", "x":4.25, "y":5}, {"label":"V", "x":5.25, "y":5}, {"label":"B", "x":6.25, "y":5}, {"label":"N", "x":7.25, "y":5}, {"label":"M", "x":8.25, "y":5}, {"label":"<", "x":9.25, "y":5}, {"label":">", "x":10.25, "y":5}, {"label":"?", "x":11.25, "y":5}, {"label":"Shift", "x":12.25, "y":5, "w":1.75}, {"label":"\u2191", "x":14.25, "y":5.25}, {"label":"1", "x":15.5, "y":5}, {"label":"2", "x":16.5, "y":5}, {"label":"3", "x":17.5, "y":5}, {"label":"Enter", "x":18.5, "y":5, "h":2}, {"label":"Ctrl", "x":0, "y":6}, {"label":"Win", "x":1, "y":6}, {"label":"Alt", "x":2, "y":6}, {"x":3, "y":6, "w":6}, {"label":"Alt", "x":9, "y":6}, {"label":"Win", "x":10, "y":6}, {"label":"Menu", "x":11, "y":6}, {"label":"Ctrl", "x":12, "y":6}, {"label":"\u2190", "x":13.25, "y":6.25}, {"label":"\u2193", "x":14.25, "y":6.25}, {"label":"\u2192", "x":15.25, "y":6.25}, {"label":"0", "x":16.5, "y":6}, {"label":".", "x":17.5, "y":6}]
+        },
+        "LAYOUT_ansi_150u_mods": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Insert", "x":15.5, "y":0}, {"label":"Home", "x":16.5, "y":0}, {"label":"PgUp", "x":17.5, "y":0}, {"label":"Prt Sc", "x":18.5, "y":0}, {"label":"Delete", "x":15.5, "y":1}, {"label":"End", "x":16.5, "y":1}, {"label":"PgDn", "x":17.5, "y":1}, {"label":"Scroll", "x":18.5, "y":1}, {"label":"~", "x":0, "y":2}, {"label":"!", "x":1, "y":2}, {"label":"@", "x":2, "y":2}, {"label":"#", "x":3, "y":2}, {"label":"$", "x":4, "y":2}, {"label":"%", "x":5, "y":2}, {"label":"^", "x":6, "y":2}, {"label":"&", "x":7, "y":2}, {"label":"*", "x":8, "y":2}, {"label":"(", "x":9, "y":2}, {"label":")", "x":10, "y":2}, {"label":"_", "x":11, "y":2}, {"label":"+", "x":12, "y":2}, {"label":"Backspace", "x":13, "y":2, "w":2}, {"label":"Num Lock", "x":15.5, "y":2}, {"label":"/", "x":16.5, "y":2}, {"label":"*", "x":17.5, "y":2}, {"label":"Pause", "x":18.5, "y":2}, {"label":"Tab", "x":0, "y":3, "w":1.5}, {"label":"Q", "x":1.5, "y":3}, {"label":"W", "x":2.5, "y":3}, {"label":"E", "x":3.5, "y":3}, {"label":"R", "x":4.5, "y":3}, {"label":"T", "x":5.5, "y":3}, {"label":"Y", "x":6.5, "y":3}, {"label":"U", "x":7.5, "y":3}, {"label":"I", "x":8.5, "y":3}, {"label":"O", "x":9.5, "y":3}, {"label":"P", "x":10.5, "y":3}, {"label":"{", "x":11.5, "y":3}, {"label":"}", "x":12.5, "y":3}, {"label":"|", "x":13.5, "y":3, "w":1.5}, {"label":"7", "x":15.5, "y":3}, {"label":"8", "x":16.5, "y":3}, {"label":"9", "x":17.5, "y":3}, {"label":"-", "x":18.5, "y":3}, {"label":"Caps Lock", "x":0, "y":4, "w":1.75}, {"label":"A", "x":1.75, "y":4}, {"label":"S", "x":2.75, "y":4}, {"label":"D", "x":3.75, "y":4}, {"label":"F", "x":4.75, "y":4}, {"label":"G", "x":5.75, "y":4}, {"label":"H", "x":6.75, "y":4}, {"label":"J", "x":7.75, "y":4}, {"label":"K", "x":8.75, "y":4}, {"label":"L", "x":9.75, "y":4}, {"label":":", "x":10.75, "y":4}, {"label":"\"", "x":11.75, "y":4}, {"label":"Enter", "x":12.75, "y":4, "w":2.25}, {"label":"4", "x":15.5, "y":4}, {"label":"5", "x":16.5, "y":4}, {"label":"6", "x":17.5, "y":4}, {"label":"+", "x":18.5, "y":4}, {"label":"Shift", "x":0, "y":5, "w":2.25}, {"label":"Z", "x":2.25, "y":5}, {"label":"X", "x":3.25, "y":5}, {"label":"C", "x":4.25, "y":5}, {"label":"V", "x":5.25, "y":5}, {"label":"B", "x":6.25, "y":5}, {"label":"N", "x":7.25, "y":5}, {"label":"M", "x":8.25, "y":5}, {"label":"<", "x":9.25, "y":5}, {"label":">", "x":10.25, "y":5}, {"label":"?", "x":11.25, "y":5}, {"label":"Shift", "x":12.25, "y":5, "w":1.75}, {"label":"\u2191", "x":14.25, "y":5.25}, {"label":"1", "x":15.5, "y":5}, {"label":"2", "x":16.5, "y":5}, {"label":"3", "x":17.5, "y":5}, {"label":"Enter", "x":18.5, "y":5, "h":2}, {"label":"Ctrl", "x":0, "y":6, "w":1.5}, {"label":"Alt", "x":1.5, "y":6, "w":1.5}, {"x":3, "y":6, "w":7}, {"label":"Menu", "x":10, "y":6, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":6, "w":1.5}, {"label":"\u2190", "x":13.25, "y":6.25}, {"label":"\u2193", "x":14.25, "y":6.25}, {"label":"\u2192", "x":15.25, "y":6.25}, {"label":"0", "x":16.5, "y":6}, {"label":".", "x":17.5, "y":6}]
+        }
+    }
+}
+

keyboards/hineybush/hineyg80/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 Josh Hinnebusch
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/hineybush/hineyg80/keymaps/default/keymap.c

@@ -0,0 +1,58 @@
+/* Copyright 2019 Josh Hinnebusch
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_ansi_100u_mods( /* Base */
+    KC_ESC,  KC_F1,    KC_F2,   KC_F3,  KC_F4,  KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_F11,   KC_F12,             KC_INS,   KC_HOME,   KC_PGUP,   KC_PSCR, 
+                                                                                   KC_DEL,   KC_END,    KC_PGDN,   KC_SLCK, 
+    KC_GRV,  KC_1,     KC_2,    KC_3,   KC_4,   KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,  KC_NLCK,  KC_PSLS,   KC_PAST,   KC_PAUS, 
+    KC_TAB,  KC_Q,     KC_W,    KC_E,   KC_R,   KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,  KC_P7,    KC_P8,     KC_P9,     KC_PMNS,
+    KC_LCTL, KC_A,     KC_S,    KC_D,   KC_F,   KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT,            KC_ENT,   KC_P4,    KC_P5,     KC_P6,     KC_PPLS, 
+    KC_LSFT,           KC_Z,    KC_X,   KC_C,   KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_UP,    KC_P1,    KC_P2,     KC_P3,     KC_PENT, 
+    KC_LCTL, KC_LGUI,  KC_LALT,         KC_SPC, KC_RALT, KC_RGUI, MO(1),  KC_RCTL,                               KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_P0,     KC_PDOT           
+    ),
+  [1] = LAYOUT_ansi_100u_mods( /* Fn */KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_MPRV,   KC_MPLY,   KC_MNXT,    KC_VOLU,  
+                                                                          KC_TRNS,    KC_TRNS,    KC_TRNS,     KC_VOLD,  
+    KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_DEL,   KC_TRNS,    KC_TRNS,    KC_TRNS,     KC_TRNS,  
+    KC_TRNS,   KC_TRNS,   KC_TRNS,  KC_TRNS, RESET , KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,    KC_TRNS,     KC_TRNS,  
+    KC_CAPS,  KC_TRNS,   KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,    KC_TRNS,     KC_TRNS,  
+    KC_TRNS,             KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,    KC_TRNS,     KC_TRNS,  
+    KC_TRNS,   KC_TRNS,   KC_TRNS,          KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,                               KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,    KC_TRNS          
+    ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/hineybush/hineyg80/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for hineyg80

keyboards/hineybush/hineyg80/keymaps/wkl/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 Josh Hinnebusch
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/hineybush/hineyg80/keymaps/wkl/keymap.c

@@ -0,0 +1,60 @@
+/* Copyright 2019 %YOUR_NAME%
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL,
+  ______ = KC_TRNS,
+  XXXXXX = KC_NO
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_ansi_150u_mods( /* Base */
+    KC_ESC,  KC_F1,    KC_F2,   KC_F3,  KC_F4,  KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_F11,   KC_F12,      KC_INS,   KC_HOME,   KC_PGUP,   KC_PSCR, 
+                                                                                   KC_DEL,   KC_END,    KC_PGDN,   KC_SLCK, 
+    KC_GRV,  KC_1,     KC_2,    KC_3,   KC_4,   KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     KC_MINS,  KC_EQL,   KC_BSPC,  KC_NLCK,  KC_PSLS,   KC_PAST,   KC_PAUS, 
+    KC_TAB,  KC_Q,     KC_W,    KC_E,   KC_R,   KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC,  KC_RBRC,  KC_BSLS,  KC_P7,    KC_P8,     KC_P9,     KC_PMNS,
+    KC_LCTL, KC_A,     KC_S,    KC_D,   KC_F,   KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,  KC_QUOT,      KC_ENT,   KC_P4,    KC_P5,     KC_P6,     KC_PPLS, 
+    KC_LSFT,    KC_Z,    KC_X,   KC_C,   KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,   KC_SLSH,  KC_RSFT,  KC_UP,    KC_P1,    KC_P2,     KC_P3,     KC_PENT, 
+    KC_LCTL,    KC_LALT,         KC_SPC,    MO(1),     KC_RCTL,                              KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_P0,     KC_PDOT           
+    ),
+  [1] = LAYOUT_ansi_150u_mods( /* Fn */______,   ______,   ______,  ______, ______, ______,  ______,    ______,  ______,  ______,   ______,   ______,   ______,   KC_MPRV,   KC_MPLY,   KC_MNXT,    KC_VOLU,  
+                                                                          ______,    ______,    ______,     KC_VOLD,  
+    ______,   ______,   ______,  ______, ______, ______,  ______,  ______,  ______,  ______,  ______,   ______,   ______,   KC_DEL,   ______,    ______,    ______,     ______,  
+    ______,   ______,   ______,  ______, RESET , ______,  ______,  ______,  ______,  ______,  ______,   ______,   ______,   ______,   ______,    ______,    ______,     ______,  
+    KC_CAPS,  ______,   ______,  ______, ______, ______,  ______,  ______,  ______,  ______,  ______,    ______,   ______,   ______,    ______,    ______,     ______,  
+    ______,      ______,  ______, ______, ______,  ______,  ______,  ______,  ______,  ______,   ______,   ______,   ______,   ______,    ______,    ______,     ______,  
+    ______,      ______,          ______,  ______,    ______,                               ______,   ______,   ______,    ______,    ______          
+    ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/hineybush/hineyg80/keymaps/wkl/readme.md

@@ -0,0 +1 @@
+# The default keymap for hineyg80

keyboards/hineybush/hineyg80/readme.md

@@ -0,0 +1,16 @@
+# hineyg80
+
+
+A small-batch PCB design to be a drop-in replacement for G80-1800 and G81-1800 boards.
+
+Keyboard Maintainer: [hineybush](https://github.com/hineybush)  
+
+Hardware Supported: hiney g80 rev 2
+
+Hardware Availability: https://geekhack.org/index.php?topic=92389.0
+
+Make example for this keyboard (after setting up your build environment):
+
+    make hineybush/hineyg80:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/hineybush/hineyg80/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/jc65/v32u4/keymaps/dead_encryption/keymap.c

@@ -15,7 +15,7 @@ const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
 const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {127, 63, 31};
 
 // These control which colors are selected for the gradient mode
-const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
+const uint8_t RGBLED_GRADIENT_RANGES[] PROGMEM = {255, 170, 127, 85, 64};
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT(

keyboards/kagamidget/config.h

@@ -0,0 +1,222 @@
+/*
+Copyright 2019 yynmt
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    yynmt
+#define PRODUCT         KagaMidget
+#define DESCRIPTION     48 keys tiny keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D1, D0, F4, F5 }
+#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5, B6, B2, B3, B1, F7, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 4
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/*#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)*/
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/kagamidget/info.json

@@ -0,0 +1,18 @@
+{
+  "keyboard_name": "KagaMidget",
+  "url": "http://yynmt.com",
+  "maintainer": "yynmt",
+  "width": 12,
+  "height": 4,
+  "layouts": {
+    "LAYOUT": {
+      "key_count": 48,
+      "layout": [
+        {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0},
+        {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1},
+        {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2},
+        {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}
+      ]
+    }
+  }
+}

keyboards/kagamidget/kagamidget.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 yynmt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "kagamidget.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/kagamidget/kagamidget.h

@@ -0,0 +1,39 @@
+/* Copyright 2019 yynmt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K01, K05, K09, K13, K17, K21, K25, K29, K33, K37, K41, K45, \
+    K02, K06, K10, K14, K18, K22, K26, K30, K34, K38, K42, K46, \
+    K03, K07, K11, K15, K19, K23, K27, K31, K35, K39, K43, K47, \
+    K04, K08, K12, K16, K20, K24, K28, K32, K36, K40, K44, K48  \
+) \
+{ \
+    { K01, K05, K09, K13, K17, K21, K25, K29, K33, K37, K41, K45 }, \
+    { K02, K06, K10, K14, K18, K22, K26, K30, K34, K38, K42, K46 }, \
+    { K03, K07, K11, K15, K19, K23, K27, K31, K35, K39, K43, K47 }, \
+    { K04, K08, K12, K16, K20, K24, K28, K32, K36, K40, K44, K48 }, \
+}

keyboards/kagamidget/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 yynmt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/kagamidget/keymaps/default/keymap.c

@@ -0,0 +1,118 @@
+/* Copyright 2019 yynmt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+enum layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Shift| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+  [_QWERTY] = LAYOUT(
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
+    KC_RSFT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+  ),
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+  [_LOWER] = LAYOUT(
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
+    _______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+  ),
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+  [_RAISE] = LAYOUT(
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+  ),
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset| Debug|RGBTog|RGBMod|RGBHuI|RGBHuD|RGBSaI|RGBSaD|RGBVaI|RGBVaD|  Del |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+  [_ADJUST] = LAYOUT(
+    _______, RESET,   DEBUG,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL ,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/kagamidget/keymaps/default/readme.md

@@ -0,0 +1,49 @@
+# The default keymap for KagaMidget
+## Qwerty
+```
+,-----------------------------------------------------------------------------------.
+| Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| Shift| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+`-----------------------------------------------------------------------------------'
+```
+## Lower
+```
+,-----------------------------------------------------------------------------------.
+|   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+`-----------------------------------------------------------------------------------'
+ ```
+## Raise
+```
+,-----------------------------------------------------------------------------------.
+|   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+`-----------------------------------------------------------------------------------'
+```
+## Adjust (Lower + Raise)
+```
+,-----------------------------------------------------------------------------------.
+|      | Reset| Debug|RGBTog|RGBMod|RGBHuI|RGBHuD|RGBSaI|RGBSaD|RGBVaI|RGBVaD|  Del |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      |      |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      |      |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      |      |      |      |      |
+`-----------------------------------------------------------------------------------'
+```

keyboards/kagamidget/readme.md

@@ -0,0 +1,14 @@
+# KagaMidget
+
+![KagaMidget](https://raw.githubusercontent.com/yynmt/KagaMidget/master/images/main_image.jpg)
+
+KagaMidget is 40% tiny keyboard.
+
+Keyboard Maintainer: [yynmt](https://github.com/yynmt)  
+Hardware Supported:  KagaMidget PCBs, ProMicro supported  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kagamidget:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kagamidget/rules.mk

@@ -0,0 +1,83 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+
+RGBLIGHT_ENABLE = yes

keyboards/kbdfans/kbd6x/keymaps/wanleg/keymap.c

@@ -0,0 +1,82 @@
+/* Copyright 2018 wanleg
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "wanleg.h"
+
+
+#define LAYOUT_kbd6x_base( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
+  ) \
+  LAYOUT_wrapper( \
+	 KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,     KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL, KC_BSPC, KC_DEL, \
+     KC_TAB, 	K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_LBRC, KC_RBRC, KC_BSLS, \
+     KC_CAPS, 	K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, KC_QUOT, KC_ENT, \
+     KC_LSFT, 	K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, KC_LSFT, FUNCTION, \
+     KC_LCTL, KC_LGUI, KC_LALT,				LT(gDIR,KC_SPC),			KC_RALT, KC_RGUI, KC_RCTL \
+  )
+#define LAYOUT_kbd6x_base_wrapper(...)       LAYOUT_kbd6x_base(__VA_ARGS__)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[gGK] = LAYOUT_kbd6x_base_wrapper(
+  _______________Gherkin_Row_0_______________,
+  _______________Gherkin_Row_1_______________,
+  _______________Gherkin_Row_2_______________
+),
+
+[gNUM] = LAYOUT_kbd6x_base_wrapper(
+  _______________Gherkin_NUM_0_______________,
+  _______________Gherkin_NUM_1_______________,
+  _______________Gherkin_NUM_2_______________
+),
+
+[gDIR] = LAYOUT_kbd6x_base_wrapper(
+  _______________Gherkin_DIR_0_______________,
+  _______________Gherkin_DIR_1_______________,
+  _______________Gherkin_DIR_2_______________
+),
+
+[gETC] = LAYOUT_kbd6x_base_wrapper(
+  _______________Gherkin_ETC_0_______________,
+  _______________Gherkin_ETC_1_______________,
+  _______________Gherkin_ETC_2_______________
+),
+
+[_FN] = LAYOUT_kbd6x_base_wrapper(
+  _______________Gherkin_FN_0________________,
+  _______________Gherkin_FN_1________________,
+  _______________Gherkin_FN_2________________
+),
+
+//mac layout
+[_QW] = LAYOUT_wrapper(
+      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,     KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,
+      KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,     KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+      KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,     KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,     KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(ONE),
+	  KC_LCTL, MO(ONE), KC_LGUI,                   KC_SPACE,                   KC_RGUI, KC_RALT, KC_RCTL
+      ),
+
+[ONE] = LAYOUT_wrapper(
+      KC_GRV,  _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+      _______, BL_BRTG, BL_DEC,  BL_INC,  BL_TOGG, BL_STEP,  BL_ON,   KC_PGUP, KC_HOME, _______, _______, _______, _______, _______,
+      _______, RGB_M_B, RGB_VAD, RGB_VAI, RGB_TOG, RGB_MOD,  KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______, _______,
+      _______, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______,  _______, KC_PGDN, KC_END,  _______, gGHERKIN,_______, _______,
+	    _______, _______, _______,                   _______,                    _______, _______, _______
+      ),
+};

keyboards/kbdfans/kbd6x/keymaps/wanleg/rules.mk

@@ -0,0 +1,3 @@
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)

keyboards/miniaxe/keymaps/wanleg/config.h

@@ -0,0 +1,11 @@
+#pragma once
+
+/* Select hand configuration */
+
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+//#define QMK_ESC_OUTPUT F1 // usually COL
+//#define QMK_ESC_INPUT D6 // usually ROW // connected to nothing on the miniaxe
+//#define QMK_LED D7 //connected to nothing on the miniaxe

keyboards/miniaxe/keymaps/wanleg/keymap.c

@@ -0,0 +1,49 @@
+#include QMK_KEYBOARD_H
+#include "wanleg.h"
+
+#define LAYOUT_miniaxe_base( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
+  ) \
+  LAYOUT_wrapper( \
+     K01,	K02,	K03,	K04,	K05,	K06,	K07,	K08,	K09,	K0A, \
+     K11,	K12,	K13,	K14,	K15,	K16,	K17,	K18,	K19,	K1A, \
+     K21,	K22,	K23,	K24,	K25,	K26,	K27,	K28,	K29,	K2A, \
+              _______, NUMBER, ETCETERA,	KC_SPC, DIRECTION, KC_RGUI            \
+  )
+#define LAYOUT_miniaxe_base_wrapper(...)       LAYOUT_miniaxe_base(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_GK] = LAYOUT_miniaxe_base_wrapper( 
+  _______________Gherkin_Row_0_______________, 
+  _______________Gherkin_Row_1_______________, 
+  SFT_T(KC_Z), 	KC_X, 	KC_C, 	LT(NUM,KC_V),	LT(ETC,KC_B),  LT(_FN,KC_N), 	LT(DIR,KC_M), 	GUI_T(KC_COMM),	ALT_T(KC_DOT),	CTL_T(KC_BSPC)  
+),
+
+[NUM] = LAYOUT_wrapper(
+  _______________Gherkin_NUM_0_______________,
+  _______________Gherkin_NUM_1_______________,
+  _______________Gherkin_NUM_2_______________,
+  _______, _______, _______,	KC_ENT, KC_RSFT, _______
+),
+
+[DIR] = LAYOUT_miniaxe_base_wrapper(
+  _______________Gherkin_DIR_0_______________,
+  _______________Gherkin_DIR_1_______________,
+  _______________Gherkin_DIR_2_______________
+),
+
+[ETC] = LAYOUT_wrapper(
+  _______________Gherkin_ETC_0_______________,
+  _______________Gherkin_ETC_1_______________,
+  _______________Gherkin_ETC_2_______________,
+  _______, NUMBER, ETCETERA,	LALT(LCTL(KC_DEL)), DIRECTION, KC_RGUI
+),
+
+[_FN] = LAYOUT_miniaxe_base_wrapper(
+  _______________Gherkin_FN_0________________,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+),
+};

keyboards/miniaxe/keymaps/wanleg/rules.mk

@@ -0,0 +1,18 @@
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+#BOOTLOADER = qmk-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096

keyboards/mint60/config.h

@@ -31,6 +31,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100
 
+#define USE_SERIAL
+
 /* key matrix size */
 #define MATRIX_ROWS 10
 #define MATRIX_COLS 8

keyboards/mint60/keymaps/default/config.h

@@ -17,7 +17,7 @@
 #pragma once
 
 /* Use I2C or Serial, not both */
-#define USE_SERIAL
+// #define USE_SERIAL
 // #define USE_I2C
 
 // #define MASTER_RIGHT

keyboards/mint60/keymaps/eucalyn/config.h

@@ -17,7 +17,7 @@
 #pragma once
 
 /* Use I2C or Serial, not both */
-#define USE_SERIAL
+// #define USE_SERIAL
 // #define USE_I2C
 
 // #define MASTER_RIGHT

keyboards/nomu30/config.h

@@ -0,0 +1,49 @@
+/*
+Copyright 2019 Naoto Takai
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC0C0
+#define PRODUCT_ID      0x3000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Naoto Takai
+#define PRODUCT         nomu30
+#define DESCRIPTION     A 30% keyboard with ISO enter.
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D1, D0, D4 }
+#define MATRIX_COL_PINS { C6, D7, E6, B4, F4, F5, F6, F7, B1, B3, B2, B6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW

keyboards/nomu30/info.json

@@ -0,0 +1,172 @@
+{
+    "keyboard_name": "Nomu30",
+    "url": "https://keys.recompile.net/projects/nomu30/",
+    "maintainer": "takai",
+    "width": 11.5,
+    "height": 3,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {
+                    "label": "Q",
+                    "x": 0.5,
+                    "y": 0
+                },
+                {
+                    "label": "W",
+                    "x": 1.5,
+                    "y": 0
+                },
+                {
+                    "label": "E",
+                    "x": 2.5,
+                    "y": 0
+                },
+                {
+                    "label": "R",
+                    "x": 3.5,
+                    "y": 0
+                },
+                {
+                    "label": "T",
+                    "x": 4.5,
+                    "y": 0
+                },
+                {
+                    "label": "Y",
+                    "x": 5.5,
+                    "y": 0
+                },
+                {
+                    "label": "U",
+                    "x": 6.5,
+                    "y": 0
+                },
+                {
+                    "label": "I",
+                    "x": 7.5,
+                    "y": 0
+                },
+                {
+                    "label": "O",
+                    "x": 8.5,
+                    "y": 0
+                },
+                {
+                    "label": "P",
+                    "x": 9.5,
+                    "y": 0
+                },
+                {
+                    "label": "Del",
+                    "x": 10.5,
+                    "y": 0
+                },
+                {
+                    "label": "|",
+                    "x": 0,
+                    "y": 1
+                },
+                {
+                    "label": "A",
+                    "x": 1,
+                    "y": 1
+                },
+                {
+                    "label": "S",
+                    "x": 2,
+                    "y": 1
+                },
+                {
+                    "label": "D",
+                    "x": 3,
+                    "y": 1
+                },
+                {
+                    "label": "F",
+                    "x": 4,
+                    "y": 1
+                },
+                {
+                    "label": "G",
+                    "x": 5,
+                    "y": 1
+                },
+                {
+                    "label": "H",
+                    "x": 6,
+                    "y": 1
+                },
+                {
+                    "label": "J",
+                    "x": 7,
+                    "y": 1
+                },
+                {
+                    "label": "K",
+                    "x": 8,
+                    "y": 1
+                },
+                {
+                    "label": "L",
+                    "x": 9,
+                    "y": 1
+                },
+                {
+                    "label": "Enter",
+                    "x": 10.25,
+                    "y": 1,
+                    "w": 1.25,
+                    "h": 2
+                },
+                {
+                    "label": "Control",
+                    "x": 0,
+                    "y": 2,
+                    "w": 1.5
+                },
+                {
+                    "label": "Z",
+                    "x": 1.5,
+                    "y": 2
+                },
+                {
+                    "label": "X",
+                    "x": 2.5,
+                    "y": 2
+                },
+                {
+                    "label": "C",
+                    "x": 3.5,
+                    "y": 2
+                },
+                {
+                    "label": "V",
+                    "x": 4.5,
+                    "y": 2
+                },
+                {
+                    "label": "B",
+                    "x": 5.5,
+                    "y": 2
+                },
+                {
+                    "label": "N",
+                    "x": 6.5,
+                    "y": 2
+                },
+                {
+                    "label": "M",
+                    "x": 7.5,
+                    "y": 2
+                },
+                {
+                    "label": "Shift",
+                    "x": 8.5,
+                    "y": 2,
+                    "w": 1.75
+                }
+            ]
+        }
+    }
+}

keyboards/nomu30/keymaps/default/config.h

@@ -0,0 +1,22 @@
+/* Copyright 2019 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
+
+#define TAPPING_TERM 200
+#define PERMISSIVE_HOLD

keyboards/nomu30/keymaps/default/keymap.c

@@ -0,0 +1,44 @@
+/* Copyright 2019 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _BASE 0
+#define _NUMS 1
+#define _SYMS 2
+#define _FUNC 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT(
+        KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+        KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
+        KC_LSFT, LALT_T(KC_Z), LGUI_T(KC_X), KC_C, LT(_SYMS, KC_V), LT(_FUNC, KC_B), LT(_NUMS, KC_N), KC_M, KC_SPC
+    ),
+    [_NUMS] = LAYOUT(
+        KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV,
+        KC_TRNS, KC_LBRC, KC_RBRC, KC_SLSH, KC_BSLS, KC_TRNS, KC_MINS, KC_EQL, KC_SCLN, KC_QUOT, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_COMM, KC_DOT
+    ),
+    [_SYMS] = LAYOUT(
+        KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TILD,
+        KC_TRNS, KC_LCBR, KC_RCBR, KC_QUES, KC_PIPE, KC_TRNS, KC_UNDS, KC_PLUS, KC_COLN, KC_DQUO, KC_TRNS,
+        KC_TRNS, KC_LABK, KC_RABK, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [_FUNC] = LAYOUT(
+        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
+        KC_TAB, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, RESET,
+        KC_TRNS, KC_LALT, KC_LGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/nomu30/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for nomu30

keyboards/nomu30/nomu30.c

@@ -0,0 +1,16 @@
+/* Copyright 2019 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "nomu30.h"

keyboards/nomu30/nomu30.h

@@ -0,0 +1,48 @@
+/* Copyright 2019 Naoto Takai
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+        K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+  K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110,       \
+  K200, K201, K202, K203, K204, K205, K206, K207, K208                    \
+) \
+{ \
+  { KC_NO, K001, K002, K003, K004, K005, K006, K007, K008, K009,  K010,  K011  }, \
+  { K100,  K101, K102, K103, K104, K105, K106, K107, K108, K109,  K110,  KC_NO }, \
+  { K200,  K201, K202, K203, K204, K205, K206, K207, K208, KC_NO, KC_NO, KC_NO }, \
+}
+
+#define LAYOUT_kc( \
+        K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+  K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110,       \
+  K200, K201, K202, K203, K204, K205, K206, K207, K208                    \
+) \
+LAYOUT( \
+             KC_##K001, KC_##K002, KC_##K003, KC_##K004, KC_##K005, KC_##K006, KC_##K007, KC_##K008, KC_##K009, KC_##K010, KC_##K011, \
+  KC_##K100, KC_##K101, KC_##K102, KC_##K103, KC_##K104, KC_##K105, KC_##K106, KC_##K107, KC_##K108, KC_##K109, KC_##K110,            \
+  KC_##K200, KC_##K201, KC_##K202, KC_##K203, KC_##K204, KC_##K205, KC_##K206, KC_##K207, KC_##K208                                   \
+)

keyboards/nomu30/readme.md

@@ -0,0 +1,15 @@
+# nomu30
+
+![nomu30](https://keys.recompile.net/images/[email protected])
+
+A 30% keyboard with ISO enter.
+
+Keyboard Maintainer: [Naoto Takai](https://github.com/takai)  
+Hardware Supported: The Nomu30 PCBs, ProMicro supported  
+Hardware Availability: https://keys.recompile.net/projects/nomu30/
+
+Make example for this keyboard (after setting up your build environment):
+
+    make nomu30:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/nomu30/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/plaid/plaid.h

@@ -60,4 +60,6 @@
 
 #define KEYMAP LAYOUT_plaid_grid
 #define LAYOUT_ortho_4x12 LAYOUT_plaid_grid
+#define LAYOUT_planck_mit LAYOUT_plaid_mit
+#define LAYOUT_kc_ortho_4x12 KC_KEYMAP
 #define KC_LAYOUT_ortho_4x12 KC_KEYMAP

keyboards/plaid/rules.mk

@@ -97,5 +97,5 @@ NO_UART = yes
 NO_SUSPEND_POWER_DOWN = yes
 
 
-LAYOUTS = ortho_4x12 planck_mit planck_grid
+LAYOUTS = ortho_4x12 planck_mit
 LAYOUTS_HAS_RGB = no

keyboards/planck/keymaps/roguepullrequest/keymap.c

@@ -4,6 +4,7 @@
 	float mushroom[][2] = SONG(MARIO_MUSHROOM);
 #endif
 
+
 extern keymap_config_t keymap_config;
 
 // Complex Tapdance hoopla
@@ -26,7 +27,8 @@ enum {
 	X_AT_FUN = 0,
 	RSHIFT,
 	LSHIFT,
-	TD_S
+	TD_S,
+	SLASH	
 };
 
 int cur_dance (qk_tap_dance_state_t *state);
@@ -110,7 +112,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	/* Programmer Dvorak */
 	[_PDVORAK] = LAYOUT_planck_grid(
 		  KC_GESC, KC_SCOLON, KC_COMMA, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC,
-   		KC_LAST, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, TD(TD_S), KC_SLASH,
+   		KC_LAST, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, TD(TD_S), TD(SLASH),
    		TD(LSHIFT), KC_QUOT, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, TD(RSHIFT),
     	TD(X_AT_FUN), KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, ALT_TAB, KC_SPACE, KC_ENTER, MT(MOD_LCTL | MOD_LSFT, KC_LGUI), KC_PGUP, KC_PGDN, LT(_LOWER, KC_PLUS)
    	),
@@ -245,6 +247,8 @@ qk_tap_dance_action_t tap_dance_actions[] = {
 	[LSHIFT] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, lshift_finished, lshift_reset),
 	[RSHIFT] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, rshift_finished, rshift_reset),
 	[TD_S] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, s_finished, s_reset),
+	[SLASH] = ACTION_TAP_DANCE_DOUBLE(KC_SLASH, KC_BSLASH),
+
 };
 
 void shutdown_user(void) { clear_keyboard(); }

keyboards/planck/keymaps/roguepullrequest/readme.md

@@ -1,12 +1,17 @@
 # Programmer Dvorak for the Planck (Light)
 
 
-| Magic    |         | UPPER |
+|          |         |       |     |      |       |       |      |      |      |      |      |
-|----------|---------|-------|
+|----------|---------|-------|-----|------|-------|-------|------|------|------|------|------|
-|          | DEFAULT |       |
+| GRAVE_ESC | ; [u]; [l]7 | , [u]% [l]5 | . [l]3 | p [l]1 | y [u]= [l]9 | f [u]* [l]0 | g [l]2 | c [l]4 | r [u]! [l]6 | l [u]# [l]8 | BKSP |
-| FUNCTION |         | LOWER |
+| LCTRL [TD]!$ | a | o | e | u | i | d | h | t | n | s [TD]- _ | / [TD]\ |
+| LSHFT [TD]( [ { | ' | q | j | k | x | b | m | w | v | z | LSHFT [TD]) ] } |
+| @ [TD]UPPER FUN RESET | LEFT | DOWN | UP | RIGHT | ALT_TAB | SPACE | ENTER | LGUI | PGUP | PGDOWN | = [TD]LOWER |
 
 # Layout notes
+-  [u] = UPPER symbol
+-  [l] = LOWER symbol
+-  [TD] = Tap Dances
 -  ALT_TAB = cycle through windows as long as you keep tapping it keeps alt tabbing
 -  LAST = "!$" = is useful for using the last parm in bash/zsh 
 -  More to come

keyboards/preonic/keymaps/mikethetiger/config.h

@@ -0,0 +1,38 @@
+#pragma once
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PREONIC_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MUSIC_MASK (keycode != KC_NO)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+#define MIDI_BASIC
+#define TAP_CODE_DELAY 10
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2

keyboards/preonic/keymaps/mikethetiger/keymap.c

@@ -0,0 +1,289 @@
+/* Copyright 2015-2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "muse.h"
+
+enum preonic_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+enum preonic_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  BACKLIT
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |  \   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Caps |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_preonic_grid( 
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,  \
+  KC_CAPS,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  \
+  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT_preonic_grid( 
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_DEL,  \
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,  \
+  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT_preonic_grid( 
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_DEL,  \
+  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT,  \
+  BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_preonic_grid( 
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,  \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_preonic_grid( 
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,  \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY  \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_preonic_grid( 
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  \
+  _______, RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL,  \
+  _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
+  _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
+)
+
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+        case QWERTY:
+          if (record->event.pressed) {
+            set_single_persistent_default_layer(_QWERTY);
+          }
+          return false;
+          break;
+        case COLEMAK:
+          if (record->event.pressed) {
+            set_single_persistent_default_layer(_COLEMAK);
+          }
+          return false;
+          break;
+        case DVORAK:
+          if (record->event.pressed) {
+            set_single_persistent_default_layer(_DVORAK);
+          }
+          return false;
+          break;
+        case LOWER:
+          if (record->event.pressed) {
+            layer_on(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_LOWER);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case RAISE:
+          if (record->event.pressed) {
+            layer_on(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          } else {
+            layer_off(_RAISE);
+            update_tri_layer(_LOWER, _RAISE, _ADJUST);
+          }
+          return false;
+          break;
+        case BACKLIT:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+            #ifdef BACKLIGHT_ENABLE
+              backlight_step();
+            #endif
+            #ifdef __AVR__
+            PORTE &= ~(1<<6);
+            #endif
+          } else {
+            unregister_code(KC_RSFT);
+            #ifdef __AVR__
+            PORTE |= (1<<6);
+            #endif
+          }
+          return false;
+          break;
+      }
+    return true;
+};
+
+bool muse_mode = false;
+uint8_t last_muse_note = 0;
+uint16_t muse_counter = 0;
+uint8_t muse_offset = 70;
+uint16_t muse_tempo = 50;
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+  if (clockwise) {
+      tap_code(KC_VOLU);
+    } else {
+      tap_code(KC_VOLD);
+    }
+  }
+
+void dip_update(uint8_t index, bool active) {
+  switch (index) {
+    case 0:
+      if (active) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      break;
+    case 1:
+      if (active) {
+        muse_mode = true;
+      } else {
+        muse_mode = false;
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+        #endif
+      }
+   }
+}
+
+void matrix_scan_user(void) {
+  #ifdef AUDIO_ENABLE
+    if (muse_mode) {
+      if (muse_counter == 0) {
+        uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()];
+        if (muse_note != last_muse_note) {
+          stop_note(compute_freq_for_midi_note(last_muse_note));
+          play_note(compute_freq_for_midi_note(muse_note), 0xF);
+          last_muse_note = muse_note;
+        }
+      }
+      muse_counter = (muse_counter + 1) % muse_tempo;
+    }
+  #endif
+}
+
+bool music_mask_user(uint16_t keycode) {
+  switch (keycode) {
+    case RAISE:
+    case LOWER:
+      return false;
+    default:
+      return true;
+  }
+}

keyboards/preonic/keymaps/mikethetiger/readme.md

@@ -0,0 +1 @@
+# mikethetiger's Preonic layout - largely based on the Planck's

keyboards/preonic/keymaps/mikethetiger/rules.mk

@@ -0,0 +1 @@
+SRC += muse.c

keyboards/signum/3_0/elitec/keymaps/default/generate_km.py

@@ -1,12 +1,11 @@
 #!/usr/bin/env python3
 # -*- coding: utf-8 -*-
 
+import json
 import layout
+import os
 import re
 
-# TODO: auto-generate mutex layers
-# TODO: auto-generate update_tri_layer (_state)
-
 
 def gen_uc_iter():
     length = len(layout.uc_dict)
@@ -18,7 +17,7 @@ def gen_uc_iter():
             yield (key, value, True)
 
 
-def translate(s):
+def _translate(s):
     if re.match("^[0-9]$", s):
         return ("KC_{0}".format(s), "   {0}   ".format(s))
     elif re.match("^[a-z]$", s):
@@ -50,80 +49,115 @@ def translate(s):
 
 
 def toKC(s):
-    (kc, lgd) = translate(s)
+    return _translate(s)[0]
-    return kc
 
 
 def toLgd(s):
-    (kc, lgd) = translate(s)
+    return _translate(s)[1]
-    return lgd
 
 
-if __name__ == "__main__":
+def writeKeymap(f_template, f_keymap, columns, rows):
-
-    template = open("km_template.txt", mode="r")
-    output = open("keymap.c", mode="w", encoding='utf-8')
-
     doCopy = False
 
-    for line in template:
+    for line in f_template:
         doCopy = True
         if line.startswith("//<enum/>"):
             doCopy = False
-#            output.write(str(layout.uc_dict))
+            # f_keymap.write(str(layout.uc_dict))
             for k, v, isLast in gen_uc_iter():
                 if isLast:
-                    output.write(k + "\n")
+                    f_keymap.write(k + "\n")
                 else:
-                    output.write(k + ",\n")
+                    f_keymap.write(k + ",\n")
-        if line.startswith("//<uc_map/>"):
+        elif line.startswith("//<uc_map/>"):
             doCopy = False
             for k, v, isLast in gen_uc_iter():
                 if isLast:
-                    output.write(u"\t[{0}] = {1}  // {2}\n".format(k, v, chr(int(v, 0))))
+                    f_keymap.write(u"\t[{0}] = {1}  // {2}\n".format(k, v, chr(int(v, 0))))
                 else:
-                    output.write(u"\t[{0}] = {1},  // {2}\n".format(k, v, chr(int(v, 0))))
+                    f_keymap.write(u"\t[{0}] = {1},  // {2}\n".format(k, v, chr(int(v, 0))))
-        if line.startswith("//<keymaps/>"):
+        elif line.startswith("//<keymaps/>"):
             doCopy = False
-            counter = len(layout.layers)
+            for layer, L in enumerate(layout.layers):
-            layer = 0
+                r_counter = rows
-            S = layout.static
+                f_keymap.write("/* Layer %d\n" % layer)
-            for L in layout.layers:
+                f_keymap.write(" * -------------------------------------------------               -------------------------------------------------\n")
-                counter -= 1
+                f_keymap.write(" * |{0}|{1}|{2}|{3}|{4}|{5}|               |{6}|{7}|{8}|{9}|{10}|{11}|\n".format(*map(toLgd, L[:12])))
-                r_counter = 4
+                f_keymap.write(" * -------------------------------------------------               -------------------------------------------------\n")
-                output.write("/* Layer %d\n" % layer)
+                f_keymap.write(" * |{0}|{1}|{2}|{3}|{4}|{5}|               |{6}|{7}|{8}|{9}|{10}|{11}|\n".format(*map(toLgd, L[12:24])))
-                output.write(" * -------------------------------------------------               -------------------------------------------------\n")
+                f_keymap.write(" * -------------------------------------------------               -------------------------------------------------\n")
-                output.write(" * |{0}|{1}|{2}|{3}|{4}|{5}|               |{6}|{7}|{8}|{9}|{10}|{11}|\n".format(toLgd(L[0][0]), toLgd(L[0][1]), toLgd(L[0][2]), toLgd(L[0][3]), toLgd(L[0][4]), toLgd(L[0][5]), toLgd(L[0][6]), toLgd(L[0][7]), toLgd(L[0][8]), toLgd(L[0][9]), toLgd(L[0][10]), toLgd(L[0][11])))
+                f_keymap.write(" * |{0}|{1}|{2}|{3}|{4}|{5}|               |{6}|{7}|{8}|{9}|{10}|{11}|\n".format(*map(toLgd, L[24:36])))
-                output.write(" * -------------------------------------------------               -------------------------------------------------\n")
+                f_keymap.write(" * -----------------------------------------------------------------------------------------------------------------\n")
-                output.write(" * |{0}|{1}|{2}|{3}|{4}|{5}|               |{6}|{7}|{8}|{9}|{10}|{11}|\n".format(toLgd(L[1][0]), toLgd(L[1][1]), toLgd(L[1][2]), toLgd(L[1][3]), toLgd(L[1][4]), toLgd(L[1][5]), toLgd(L[1][6]), toLgd(L[1][7]), toLgd(L[1][8]), toLgd(L[1][9]), toLgd(L[1][10]), toLgd(L[1][11])))
+                f_keymap.write(" *  {0} {1} {2}        |{3}|{4}|{5}|{6}|{7}|{8}|        {9} {10} {11}".format(*map(toLgd, L[36:48])).rstrip()+"\n")
-                output.write(" * -------------------------------------------------               -------------------------------------------------\n")
+                f_keymap.write(" *                                 -------------------------------------------------\n")
-                output.write(" * |{0}|{1}|{2}|{3}|{4}|{5}|               |{6}|{7}|{8}|{9}|{10}|{11}|\n".format(toLgd(L[2][0]), toLgd(L[2][1]), toLgd(L[2][2]), toLgd(L[2][3]), toLgd(L[2][4]), toLgd(L[2][5]), toLgd(L[2][6]), toLgd(L[2][7]), toLgd(L[2][8]), toLgd(L[2][9]), toLgd(L[2][10]), toLgd(L[2][11])))
+                f_keymap.write(" */\n")
-                output.write(" * -----------------------------------------------------------------------------------------------------------------\n")
-                output.write(" *  {0} {1} {2}        |{3}|{4}|{5}|{6}|{7}|{8}|        {9} {10} {11}".format(toLgd(L[3][0]), toLgd(L[3][1]), toLgd(L[3][2]), toLgd(L[3][3]), toLgd(L[3][4]), toLgd(L[3][5]), toLgd(L[3][6]), toLgd(L[3][7]), toLgd(L[3][8]), toLgd(L[3][9]), toLgd(L[3][10]), toLgd(L[3][11])).rstrip()+"\n")
-                output.write(" *                                 -------------------------------------------------\n")
-                output.write(" */\n")
 
                 l_code = '\tLAYOUT_ortho_4x12(\n'
                 for r in range(r_counter):
                     r_counter -= 1
-                    c_counter = 12
+                    c_counter = columns
                     l_code += '\t\t'
                     for c in range(c_counter):
                         c_counter -= 1
                         if c != 0:
                             l_code += " "
-                        l_code += "%s" % toKC(L[r][c])
+                        l_code += "%s" % toKC(L[r*columns + columns-c_counter-1])
                         if r_counter or c_counter:
                             l_code += ","
                     l_code += '\n'
-                if counter:
+                if layer + 1 != len(layout.layers):
                     l_code += "\t),\n\n"
                 else:
                     l_code += "\t)\n"
-                output.write(l_code)
+                f_keymap.write(l_code)
-                layer += 1
         if doCopy:
-            output.write(line)
+            f_keymap.write(line)
 
-    template.close()
+
-    output.close()
+def getKeymapJSON(keyboard, keymap, layout, layers):
+    return json.dumps({
+        'keyboard': keyboard,
+        'keymap': keymap,
+        'layout': layout,
+        'layers': layers
+        }, sort_keys=True, indent=4)
+
+
+def layersToKC(layers):
+    return [list(map(toKC, layer)) for layer in layers]
+
+
+def pathToKeymap(path):
+    head, keymap = os.path.split(path)
+    _, keymapsdir = os.path.split(head)
+    if keymapsdir == 'keymaps':
+        return keymap
+
+
+def pathToKeyboard(path):
+    head, keymap = os.path.split(path)
+    head, keymapsdir = os.path.split(head)
+    if keymapsdir == 'keymaps':
+        head, dir = os.path.split(head)
+        while dir not in ('/', 'keyboards'):
+            yield dir
+            head, dir = os.path.split(head)
+
+
+if __name__ == "__main__":
+    with open("km_template.txt", mode="r") as f_template:
+        with open("keymap.c", mode="w", encoding='utf-8') as f_keymap:
+            writeKeymap(f_template, f_keymap, columns=12, rows=4)
+
+    abspath = os.path.dirname(os.path.abspath(__file__))
+    keyboard = list(reversed(list(pathToKeyboard(abspath))))
+    keymap = pathToKeymap(abspath)
+    keyboard_layout = 'LAYOUT_ortho_4x12'
+    with open("%s_%s.json" % ('_'.join(keyboard), keymap), mode="w") as f_keymapjson:
+        f_keymapjson.write(
+                getKeymapJSON(
+                    '/'.join(keyboard),
+                    keymap,
+                    keyboard_layout,
+                    layersToKC(layout.layers))
+                )

keyboards/signum/3_0/elitec/keymaps/default/keymap.c

@@ -672,8 +672,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 	LAYOUT_ortho_4x12(
 		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_RBRC,
-		KC_TRNS, DF(0), DF(1), XXXXXXX, XXXXXXX, MO(3), KC_4, KC_4, KC_5, KC_6, KC_MINS, KC_EQL,
+		KC_TRNS, DF(0), DF(1), KC_NO, KC_NO, MO(3), KC_4, KC_4, KC_5, KC_6, KC_MINS, KC_EQL,
-		KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MO(5), KC_1, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS,
+		KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, MO(5), KC_1, KC_1, KC_2, KC_3, KC_BSLS, KC_TRNS,
 		TG(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS, KC_BSPC, KC_0, KC_TRNS, KC_TRNS, KC_TRNS
 	),
 
@@ -689,9 +689,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 -------------------------------------------------
  */
 	LAYOUT_ortho_4x12(
-		KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX,
+		KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_NO,
-		KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, MO(3), KC_F4, KC_F4, KC_F5, KC_F6, XXXXXXX, XXXXXXX,
+		KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, MO(3), KC_F4, KC_F4, KC_F5, KC_F6, KC_NO, KC_NO,
-		KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F1, KC_F1, KC_F2, KC_F3, XXXXXXX, KC_TRNS,
+		KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_F1, KC_F1, KC_F2, KC_F3, KC_NO, KC_TRNS,
 		TG(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS
 	),
 
@@ -709,7 +709,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	LAYOUT_ortho_4x12(
 		KC_ESC, KC_ESC, LCTL(KC_W), LCTL(KC_T), CTL_T(KC_PGDN), CTL_T(KC_PGDN), KC_PGDN, KC_HOME, KC_UP, KC_INS, LSFT(KC_INS), KC_ESC,
 		KC_TRNS, KC_CAPS, LGUI_T(KC_LEFT), LGUI_T(KC_TAB), LGUI_T(KC_RIGHT), LGUI_T(KC_RIGHT), KC_LEFT, KC_LEFT, KC_DOWN, KC_RIGHT, KC_END, KC_PSCR,
-		KC_TRNS, XXXXXXX, XXXXXXX, XXXXXXX, CTL_T(KC_PGUP), CTL_T(KC_PGUP), KC_PGUP, XXXXXXX, KC_DOWN, XXXXXXX, KC_APP, KC_TRNS,
+		KC_TRNS, KC_NO, KC_NO, KC_NO, CTL_T(KC_PGUP), CTL_T(KC_PGUP), KC_PGUP, KC_NO, KC_DOWN, KC_NO, KC_APP, KC_TRNS,
 		TG(4), KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
 	),
 
@@ -725,9 +725,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 -------------------------------------------------
  */
 	LAYOUT_ortho_4x12(
-		KC_TRNS, XXXXXXX, KC_MPLY, KC_VOLU, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, KC_PWR,
+		KC_TRNS, KC_NO, KC_MPLY, KC_VOLU, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET, KC_PWR,
-		KC_TRNS, XXXXXXX, KC_MPRV, KC_MUTE, KC_MNXT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLEP,
+		KC_TRNS, KC_NO, KC_MPRV, KC_MUTE, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_SLEP,
-		KC_TRNS, XXXXXXX, XXXXXXX, KC_VOLD, KC_VOLD, MO(5), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+		KC_TRNS, KC_NO, KC_NO, KC_VOLD, KC_VOLD, MO(5), KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
 		TG(5), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
 	),
 
@@ -743,9 +743,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                 -------------------------------------------------
  */
 	LAYOUT_ortho_4x12(
-		KC_TRNS, KC_ACL1, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_U, KC_WH_L, KC_MS_U, KC_WH_R, XXXXXXX, XXXXXXX,
+		KC_TRNS, KC_ACL1, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_U, KC_WH_L, KC_MS_U, KC_WH_R, KC_NO, KC_NO,
-		KC_TRNS, KC_ACL2, KC_BTN3, KC_BTN2, KC_BTN1, KC_BTN1, KC_MS_L, KC_MS_L, KC_MS_D, KC_MS_R, XXXXXXX, XXXXXXX,
+		KC_TRNS, KC_ACL2, KC_BTN3, KC_BTN2, KC_BTN1, KC_BTN1, KC_MS_L, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_NO,
-		KC_TRNS, KC_ACL0, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_WH_D, XXXXXXX, KC_MS_D, XXXXXXX, XXXXXXX, KC_TRNS,
+		KC_TRNS, KC_ACL0, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_D, KC_NO, KC_MS_D, KC_NO, KC_NO, KC_TRNS,
 		TG(6), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
 	)
 };

keyboards/signum/3_0/elitec/keymaps/default/layout.py

@@ -1,3 +1,5 @@
+# -*- coding: utf-8 -*-
+
 # Add all used Unicode symbols to this list.
 # The key (e.g. "SNEK") is used in keymap.c for "enum", "unicode_map" and "keymaps", so it needs to be a valid C variable name.
 # The key is also used in this file to define the layout, so use recognizeable names.
@@ -336,7 +338,7 @@ qmk_dict = {
     # If you find "BAD" in your keymaps, then something went wrong.)
     "a": "BAD", "A": "BAD", "0": "BAD",
     # Basic Keycodes
-    "XXX": "XXXXXXX", "": "KC_TRNS",
+    "XXX": "KC_NO", "": "KC_TRNS",
     "!": "S(KC_1)", "@": "S(KC_2)", "#": "S(KC_3)", "$": "S(KC_4)", "%": "S(KC_5)",
     "^": "S(KC_6)", "&": "S(KC_7)", "*": "S(KC_8)", "(": "S(KC_9)", ")": "S(KC_0)",
     "Enter": "KC_ENT", "Esc": "KC_ESC", "BSpace": "KC_BSPC", "Tab": "KC_TAB",
@@ -426,58 +428,58 @@ static = ["NEO", "GREEK", "GREEK", "GREEK", "GREEK", "MOUSE"]
 
 # 0
 qwerty = [
-    ["Tab",     "q",    "w",       "e",       "r",       "t",       "y",       "u",       "i",       "o",       "p",       "["],
+    "Tab",     "q",    "w",       "e",       "r",       "t",       "y",       "u",       "i",       "o",       "p",       "[",
-    ["LCtrl",   "a",    "s",       "d",       "f",       "g",       "h",       "j",       "k",       "l",       ";",       "'"],
+    "LCtrl",   "a",    "s",       "d",       "f",       "g",       "h",       "j",       "k",       "l",       ";",       "'",
-    ["LShift(", "z",    "x",       "c",       "v",       "b",       "n",       "m",       ",",       ".",       "/",       "RShift)"],
+    "LShift(", "z",    "x",       "c",       "v",       "b",       "n",       "m",       ",",       ".",       "/",       "RShift)",
-    ["MO2",     "LGui", "LAlt",    "TT2",     "LT6_SPC", "TT4",     "Enter",   "Space",   "TT2",     "RAlt",    "RGui",    "RCtrl"],
+    "MO2",     "LGui", "LAlt",    "TT2",     "LT6_SPC", "TT4",     "Enter",   "Space",   "TT2",     "RAlt",    "RGui",    "RCtrl",
     ]
 
 # 1
 colemak = [
-    ["Tab",     "q",    "w",       "f",       "p",       "g",       "j",       "l",       "u",       "y",       ";",       "["],
+    "Tab",     "q",    "w",       "f",       "p",       "g",       "j",       "l",       "u",       "y",       ";",       "[",
-    ["LCtrl",   "a",    "r",       "s",       "t",       "d",       "h",       "n",       "e",       "i",       "o",       "'"],
+    "LCtrl",   "a",    "r",       "s",       "t",       "d",       "h",       "n",       "e",       "i",       "o",       "'",
-    ["LShift(", "z",    "x",       "c",       "v",       "b",       "k",       "m",       ",",       ".",       "/",       "RShift)"],
+    "LShift(", "z",    "x",       "c",       "v",       "b",       "k",       "m",       ",",       ".",       "/",       "RShift)",
-    ["MO2",     "LGui", "LAlt",    "TT2",     "LT6_SPC", "TT4",     "Enter",   "Space",   "TT2",     "RAlt",    "RGui",    "RCtrl"],
+    "MO2",     "LGui", "LAlt",    "TT2",     "LT6_SPC", "TT4",     "Enter",   "Space",   "TT2",     "RAlt",    "RGui",    "RCtrl",
     ]
 
 # 2
 numpad = [
-    ["`",       "1",    "2",       "3",       "4",       "5",       "6",       "7",       "8",       "9",       "0",       "]"],
+    "`",       "1",    "2",       "3",       "4",       "5",       "6",       "7",       "8",       "9",       "0",       "]",
-    ["",        "DF0",  "DF1",     "XXX",     "XXX",     "MO3",     "4",       "4",       "5",       "6",       "-",       "="],
+    "",        "DF0",  "DF1",     "XXX",     "XXX",     "MO3",     "4",       "4",       "5",       "6",       "-",       "=",
-    ["",        "XXX",  "XXX",     "XXX",     "XXX",     "MO5",     "1",       "1",       "2",       "3",       "\\",      ""],
+    "",        "XXX",  "XXX",     "XXX",     "XXX",     "MO5",     "1",       "1",       "2",       "3",       "\\",      "",
-    ["TG2",     "",     "",        "",        "Del",     "",        "",        "BSpace",  "0",       "",        "",        ""],
+    "TG2",     "",     "",        "",        "Del",     "",        "",        "BSpace",  "0",       "",        "",        "",
     ]
 
 # 3
 fpad = [
-    ["",        "F1",   "F2",      "F3",      "F4",      "F5",      "F6",      "F7",      "F8",      "F9",      "F10",     "XXX"],
+    "",        "F1",   "F2",      "F3",      "F4",      "F5",      "F6",      "F7",      "F8",      "F9",      "F10",     "XXX",
-    ["",        "XXX",  "XXX",     "XXX",     "XXX",     "MO3",     "F4",      "F4",      "F5",      "F6",      "XXX",     "XXX"],
+    "",        "XXX",  "XXX",     "XXX",     "XXX",     "MO3",     "F4",      "F4",      "F5",      "F6",      "XXX",     "XXX",
-    ["",        "XXX",  "XXX",     "XXX",     "XXX",     "XXX",     "F1",      "F1",      "F2",      "F3",      "XXX",     ""],
+    "",        "XXX",  "XXX",     "XXX",     "XXX",     "XXX",     "F1",      "F1",      "F2",      "F3",      "XXX",     "",
-    ["TG3",     "",     "",        "",        "",        "",        "F10",     "F11",     "F12",     "",        "",        ""],
+    "TG3",     "",     "",        "",        "",        "",        "F10",     "F11",     "F12",     "",        "",        "",
     ]
 
 # 4
 movement = [
-    ["Esc",     "Esc",  "Tab x",   "Tab n",   "CPg Dn",  "CPg Dn",  "Pg Down", "Home",    "^ Arrow", "Insert",  "SInsert", "Esc"],
+    "Esc",     "Esc",  "Tab x",   "Tab n",   "CPg Dn",  "CPg Dn",  "Pg Down", "Home",    "^ Arrow", "Insert",  "SInsert", "Esc",
-    ["",        "Caps", "< Gui",   "Gui Tab", "> Gui",   "> Gui",   "< Arrow", "< Arrow", "v Arrow", "> Arrow", "End",     "Pr Scr"],
+    "",        "Caps", "< Gui",   "Gui Tab", "> Gui",   "> Gui",   "< Arrow", "< Arrow", "v Arrow", "> Arrow", "End",     "Pr Scr",
-    ["",        "XXX",  "XXX",     "XXX",     "CPg Up",  "CPg Up",  "Pg Up",   "XXX",     "v Arrow", "XXX",     "App",     ""],
+    "",        "XXX",  "XXX",     "XXX",     "CPg Up",  "CPg Up",  "Pg Up",   "XXX",     "v Arrow", "XXX",     "App",     "",
-    ["TG4",     "",     "",        "",        "Del",     "",        "",        "BSpace",  "",        "",        "",        ""],
+    "TG4",     "",     "",        "",        "Del",     "",        "",        "BSpace",  "",        "",        "",        "",
     ]
 
 # 5
 media = [
-    ["",        "XXX",  "play/ps", "Vol +",   "Vol +",   "XXX",     "XXX",     "XXX",     "XXX",     "XXX",     "_reset",  "Power"],
+    "",        "XXX",  "play/ps", "Vol +",   "Vol +",   "XXX",     "XXX",     "XXX",     "XXX",     "XXX",     "_reset",  "Power",
-    ["",        "XXX",  "|<<",     "Vol 0",   ">>|",     "XXX",     "XXX",     "XXX",     "XXX",     "XXX",     "XXX",     "Sleep"],
+    "",        "XXX",  "|<<",     "Vol 0",   ">>|",     "XXX",     "XXX",     "XXX",     "XXX",     "XXX",     "XXX",     "Sleep",
-    ["",        "XXX",  "XXX",     "Vol -",   "Vol -",   "MO5",     "XXX",     "XXX",     "XXX",     "XXX",     "XXX",     "XXX"],
+    "",        "XXX",  "XXX",     "Vol -",   "Vol -",   "MO5",     "XXX",     "XXX",     "XXX",     "XXX",     "XXX",     "XXX",
-    ["TG5",     "",     "",        "",        "",        "",        "",        "",        "",        "",        "",        ""],
+    "TG5",     "",     "",        "",        "",        "",        "",        "",        "",        "",        "",        "",
     ]
 
 # 6
 mouse = [
-    ["",        "acc1", "XXX",     "XXX",     "XXX",     "XXX",     "^ Wheel", "< Wheel", "^ Mouse", "> Wheel", "XXX",     "XXX"],
+    "",        "acc1", "XXX",     "XXX",     "XXX",     "XXX",     "^ Wheel", "< Wheel", "^ Mouse", "> Wheel", "XXX",     "XXX",
-    ["",        "acc2", "Mouse 3", "Mouse 2", "Mouse 1", "Mouse 1", "< Mouse", "< Mouse", "v Mouse", "> Mouse", "XXX",     "XXX"],
+    "",        "acc2", "Mouse 3", "Mouse 2", "Mouse 1", "Mouse 1", "< Mouse", "< Mouse", "v Mouse", "> Mouse", "XXX",     "XXX",
-    ["",        "acc0", "XXX",     "XXX",     "XXX",     "XXX",     "v Wheel", "XXX",     "v Mouse", "XXX",     "XXX",     ""],
+    "",        "acc0", "XXX",     "XXX",     "XXX",     "XXX",     "v Wheel", "XXX",     "v Mouse", "XXX",     "XXX",     "",
-    ["TG6",     "",     "",        "",        "",        "",        "",        "",        "",        "",        "",        ""],
+    "TG6",     "",     "",        "",        "",        "",        "",        "",        "",        "",        "",        "",
     ]
 
 layers = [

keyboards/signum/3_0/elitec/keymaps/default/readme.md

@@ -20,4 +20,5 @@ starting point to create your own layouts for the Signum 3.0 with
     - Attention 2: additional C functions need to be put into
       `km_template.txt`
 
-Run `./generate_km.py` to regenerate `keymap.c`.
+Run `./generate_km.py` to regenerate `keymap.c` and the JSON keymap
+definition that should be copied to `qmk_configurator/public/keymaps`.

keyboards/sol/keymaps/xulkal/keymap.c

@@ -92,15 +92,29 @@ static void render_logo(void) {
   oled_write_P(sol_logo, false);
 }
 
+extern rgb_config_t rgb_matrix_config;
+
 static void render_status(void) {
   // Render to mode icon
-  static const char PROGMEM mode_logo[2][4] = {
+  static const char PROGMEM mode_logo[2][3] = {
-    {0x97,0x98,0x0a,0},
+    {0x97,0x98,0},
-    {0xb7,0xb8,0x0a,0} };
+    {0xb7,0xb8,0} };
 
     oled_write_P(mode_logo[0], false);
+
+#if defined(RGB_MATRIX_ENABLE)
+    static char buffer[20] = {0};
+    snprintf(buffer, sizeof(buffer), "    h%3d s%3d v%3d\n", rgb_matrix_config.hue, rgb_matrix_config.sat, rgb_matrix_config.val);
+    oled_write(buffer, false);
+#endif
+
     oled_write_P(mode_logo[1], false);
 
+#if defined(RGB_MATRIX_ENABLE)
+    snprintf(buffer, sizeof(buffer), "         s%3d m%3d\n", rgb_matrix_config.speed, rgb_matrix_config.mode);
+    oled_write(buffer, false);
+#endif
+
   // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
   oled_write_P(PSTR("Layer: "), false);
   switch (biton32(layer_state)) {

layouts/community/ortho_3x10/wanleg/config.h

@@ -2,8 +2,25 @@
 
 //QMK DFU settings (ProMicro boards)
 // set top left key as bootloader mode escape key on Gherkin
-#if defined(KEYBOARD_gherkin)
+#if defined(KEYBOARD_40percentclub_gherkin) && !defined(FLIP) 
 #define QMK_LED B0
 #define QMK_ESC_OUTPUT B4 // usually COL
 #define QMK_ESC_INPUT F7 // usually ROW
 #endif
+
+//change gherkin orientation (i.e. move USB port from right side to left side)
+#if defined(KEYBOARD_40percentclub_gherkin) && defined(FLIP) 
+//need to fix QMKdfu setting:
+#define QMK_ESC_OUTPUT B6 // usually COL
+#define QMK_ESC_INPUT D0 // usually ROW
+#define QMK_LED B0
+
+//need to undefine standard 4x4 array before defining alternate ProMicro array
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+//standard config:
+//#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
+//#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 }
+#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
+#define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B4 }
+#endif

layouts/community/ortho_3x10/wanleg/keymap.c

@@ -26,4 +26,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______________Gherkin_ETC_2_______________
 ),
 
+[_FN] = LAYOUT_ortho_3x10_wrapper(
+  _______________Gherkin_FN_0________________,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+),
 };

layouts/community/ortho_3x10/wanleg/readme.md

@@ -1,4 +1,4 @@
-![Gherkin Wanleg Layout Image](https://i.imgur.com/nCPog2W.png)  
+![Gherkin Wanleg Layout Image](https://i.imgur.com/iNkR90W.png)  
 # Gherkin Wanleg Layout
 This is the layout I came up with to preserve a standard QWERTY 104 key ANSI layout as much as possible, in as few layers as possible for a 30 key board.  
 Here are the two Tap Dance keys I've set up for this board:
@@ -47,9 +47,9 @@ The instructions below have been adapted from https://www.reddit.com/r/olkb/comm
 | Arduino | ProMicro |
 | --- | --- |
 | 10 | RST |
-| 11 | 16 |
+| 11 (MOSI) | 16 |
-| 12 | 14 |
+| 12 (MISO) | 14 |
-| 13 | 15 |
+| 13 (SCK) | 15 |
 | GND | GND |
 | 5V | VCC |
 

layouts/community/ortho_3x10/wanleg/rules.mk

@@ -1,3 +1 @@
-SWAP_HANDS_ENABLE = no
-
 BOOTLOADER = qmk-dfu

layouts/community/ortho_4x12/wanleg/config.h

@@ -20,6 +20,13 @@
 #define EE_HANDS
 #endif
 
+// set top left key as bootloader mode escape key on Nori
+#if defined(KEYBOARD_40percentclub_nori)
+#define QMK_LED B0
+#define QMK_ESC_OUTPUT F4 // usually COL
+#define QMK_ESC_INPUT D3 // usually ROW
+#endif
+
 // set top left key as bootloader mode escape key on 4x4 48key layout
 #if defined(KEYBOARD_40percentclub_4x4) && !defined(PRO_MICRO)
 #define QMK_LED B0

layouts/community/ortho_4x12/wanleg/keymap.c

@@ -21,7 +21,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _____________DIRECTIONS_Row__2_____________,
   _______, _______, ONEHAND, _______, _______, _______, _______, _______, _______, _______, _______, _______
 ),
-#elif defined(KEYBOARD_40percentclub_4x4)
+#elif defined(KEYBOARD_40percentclub_4x4) || defined(KEYBOARD_40percentclub_nori)
 [_GK] = LAYOUT_ortho_4x12_wrapper(
   _______________GherkinLike_0_______________,
   _______________GherkinLike_1_______________,
@@ -36,14 +36,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______________NUMPAD_Row__3_______________
 ),
 
-#elif defined(KEYBOARD_jj40)
-[_GK] = LAYOUT_ortho_4x12_wrapper(
-  _______________GherkinLike_0_______________,
-  _______________GherkinLike_1_______________,
-  _______________GherkinLike_2_______________,
-  TD(RST_TAP_DANCE), BL_TOGG, BL_STEP, BL_BRTG, NUMBER, ETCETERA, KC_SPC,DIRECTION, KC_RGUI, KC_RALT, KC_DEL, KC_RCTL
-),
-
 #else
 [_GK] = LAYOUT_ortho_4x12_wrapper(
   _______________GherkinLike_0_______________,
@@ -94,4 +86,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ______________ETCETERA_Row__3______________
 ),
 
+[_FN] = LAYOUT_ortho_4x12_wrapper(
+  _______, _______________Gherkin_FN_0________________, _______,
+  _______, _______________Gherkin_FN_0________________, _______,
+  _______, _______________Gherkin_FN_0________________, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+),
+
 };

layouts/community/ortho_4x12/wanleg/rules.mk

@@ -7,4 +7,9 @@ endif
 
 ifeq ($(strip $(KEYBOARD)), planck/rev6)
 	AUDIO_ENABLE = yes
+endif
+
+#disable RGB on version 1 of jj40 keyboard (does not exist)
+ifeq ($(strip $(KEYBOARD)), jj40)
+	RGBLIGHT_ENABLE = no
 endif

layouts/community/ortho_5x15/wanleg/keymap.c

@@ -11,7 +11,7 @@
 	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e  \
   ) \
    LAYOUT_ortho_5x15_wrapper( \
-     KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_NLCK,  QWERTY, GHERKIN, FUNCTION, \
+     KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    QWERTY, GHERKIN, FUNCTION,	KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_NLCK,  \
      K00, K01, K02, K03, K04, K05, 		K0c,  K0d,  K0e,		K06, K07, K08, K09, K0a, K0b, \
      K10, K11, K12, K13, K14, K15, 		K1c,  K1d,  K1e,		K16, K17, K18, K19, K1a, K1b, \
      K20, K21, K22, K23, K24, K25, 		K2c,  K2d,  K2e,		K26, K27, K28, K29, K2a, K2b, \
@@ -26,7 +26,7 @@
 	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e  \
   ) \
    LAYOUT_ortho_5x15_wrapper( \
-     KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_NLCK,  QWERTY, GHERKIN, FUNCTION, \
+     QWERTY, GHERKIN, FUNCTION,	KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_NLCK,  \
      K0c,  K0d,  K0e,		K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, \
      K1c,  K1d,  K1e, 		K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, \
      K2c,  K2d,  K2e, 		K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, \
@@ -110,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 ),
 #endif
 #else
- /* Gherkin
+ /* Gherkin-Like
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | NUMLOCK| qwerty | gherkin| FN     |
  * |-----------------------------------------------------------------------------------------------------------+--------+--------+--------|
@@ -190,7 +190,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ________________SUPRA_Row_3________________, _______, _______, _______
 ),
 
-/* Gherkin Numbers
+/* Gherkin-Like Numbers
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
  * |-----------------------------------------------------------------------------------------------------------|--------+-----------------|
@@ -210,7 +210,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______________NUMBERS_Row_3_______________, _______, _______, _______
 ),
 
-/* Gherkin Et Cetera
+/* Gherkin-Like Et Cetera
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
  * |-----------------------------------------------------------------------------------------------------------|--------+-----------------|
@@ -230,7 +230,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ______________ETCETERA_Row__3______________, _______, _______, _______
 ),
 
-/* Gherkin Directional Keys
+/* Gherkin-Like Directional Keys
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
  * |-----------------------------------------------------------------------------------------------------------|--------+-----------------|
@@ -250,25 +250,25 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _____________DIRECTIONS_Row__3_____________, _______, _______, _______
 ),
 
-
+/* Gherkin FN/Lighting
-/* FUNCTION 
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * |-----------------------------------------------------------------------------------------------------------|--------+-----------------|
- * |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |                                                                                                           |        |        |        |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |                                                                                                           |--------+--------+--------|
- * | CAP LK | MS BT5 | MS BT4 | MS BT3 | MS BT2 | SLOW M | FAST M | NEXT   | VOL+   | VOL-   | PLAY   |        |        |        | WHEEL+ |
+ * |                                          4x12 FN/Lighting LAYOUT                                          |        |        |        |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |                                                                                                           |--------+--------+--------|
- * | RGB TG | RGB MD | RGB HI | RGB HD | RGB SI | RGB SD | RGB VI | RGB VD | BL TOG | BL INC | BL DEC |        |        | MOUS U | WHEEL- |
+ * |                                                                                                           |        |        |        |
- * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * |                                                                                                           |--------+--------+--------|
- * |        |        |        |        |        |        | MS BT1 |        |        |        |        |        | MOUS L | MOUS D | MOUS R |
+ * |                                                                                                           |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */
+
 [_FN] = LAYOUT_75_base_wrapper(
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______________Gherkin_FN_0________________, _______, _______, _______, _______, 
-  KC_CAPS, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, KC_ACL0, KC_ACL2, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, _______, _______, _______, KC_WH_U,
+  _______, _______________Gherkin_FN_1________________, _______, _______, _______, _______, 
-  RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_TOGG, BL_INC,  BL_DEC,  _______, _______, KC_MS_U, KC_WH_D,
+  _______, _______________Gherkin_FN_2________________, _______, _______, _______, _______, 
-  _______, _______, _______, _______, _______, _______, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R
+  _______, _________________BLANK_50__________________, _______, _______, _______, _______
 ),
 
 };

quantum/color.c

@@ -22,8 +22,8 @@
 RGB hsv_to_rgb( HSV hsv )
 {
 	RGB rgb;
-	uint8_t region, p, q, t;
+	uint8_t region, remainder, p, q, t;
-	uint16_t h, s, v, remainder;
+	uint16_t h, s, v;
 
 	if ( hsv.s == 0 )
 	{
@@ -37,8 +37,8 @@ RGB hsv_to_rgb( HSV hsv )
 	s = hsv.s;
 	v = hsv.v;
 
-	region = h / 43;
+	region = h * 6 / 255;
-	remainder = (h - (region * 43)) * 6;
+	remainder = (h * 2 - region * 85) * 3;
 
 	p = (v * (255 - s)) >> 8;
 	q = (v * (255 - ((s * remainder) >> 8))) >> 8;
@@ -46,6 +46,7 @@ RGB hsv_to_rgb( HSV hsv )
 
 	switch ( region )
 	{
+		case 6:
 		case 0:
 			rgb.r = v;
 			rgb.g = t;

quantum/led_tables.c

@@ -19,38 +19,28 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef USE_CIE1931_CURVE
 // Lightness curve using the CIE 1931 lightness formula
 //Generated by the python script provided in http://jared.geek.nz/2013/feb/linear-led-pwm
-const uint8_t CIE1931_CURVE[] PROGMEM = {
+const uint8_t CIE1931_CURVE[256] PROGMEM = {
-    0, 0, 0, 0, 0, 1, 1, 1, 1, 1,
+  0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   1,   1,   1,   1,   1,   1,
-    1, 1, 1, 1, 2, 2, 2, 2, 2, 2,
+  1,   1,   1,   2,   2,   2,   2,   2,   2,   2,   2,   3,   3,   3,   3,   3,
-    2, 2, 2, 3, 3, 3, 3, 3, 3, 3,
+  3,   3,   4,   4,   4,   4,   4,   5,   5,   5,   5,   5,   6,   6,   6,   6,
-    3, 4, 4, 4, 4, 4, 4, 5, 5, 5,
+  6,   7,   7,   7,   7,   8,   8,   8,   8,   9,   9,   9,  10,  10,  10,  11,
-    5, 5, 6, 6, 6, 6, 6, 7, 7, 7,
+ 11,  11,  12,  12,  12,  13,  13,  13,  14,  14,  14,  15,  15,  16,  16,  16,
-    7, 8, 8, 8, 8, 9, 9, 9, 10, 10,
+ 17,  17,  18,  18,  19,  19,  20,  20,  21,  21,  22,  22,  23,  23,  24,  24,
-    10, 10, 11, 11, 11, 12, 12, 12, 13, 13,
+ 25,  25,  26,  26,  27,  28,  28,  29,  29,  30,  31,  31,  32,  33,  33,  34,
-    13, 14, 14, 15, 15, 15, 16, 16, 17, 17,
+ 35,  35,  36,  37,  37,  38,  39,  40,  40,  41,  42,  43,  44,  44,  45,  46,
-    17, 18, 18, 19, 19, 20, 20, 21, 21, 22,
+ 47,  48,  49,  49,  50,  51,  52,  53,  54,  55,  56,  57,  58,  59,  60,  61,
-    22, 23, 23, 24, 24, 25, 25, 26, 26, 27,
+ 62,  63,  64,  65,  66,  67,  68,  69,  70,  71,  72,  73,  75,  76,  77,  78,
-    28, 28, 29, 29, 30, 31, 31, 32, 32, 33,
+ 79,  80,  82,  83,  84,  85,  87,  88,  89,  90,  92,  93,  94,  96,  97,  99,
-    34, 34, 35, 36, 37, 37, 38, 39, 39, 40,
+100, 101, 103, 104, 106, 107, 108, 110, 111, 113, 114, 116, 118, 119, 121, 122,
-    41, 42, 43, 43, 44, 45, 46, 47, 47, 48,
+124, 125, 127, 129, 130, 132, 134, 135, 137, 139, 141, 142, 144, 146, 148, 149,
-    49, 50, 51, 52, 53, 54, 54, 55, 56, 57,
+151, 153, 155, 157, 159, 161, 162, 164, 166, 168, 170, 172, 174, 176, 178, 180,
-    58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
+182, 185, 187, 189, 191, 193, 195, 197, 200, 202, 204, 206, 208, 211, 213, 215,
-    68, 70, 71, 72, 73, 74, 75, 76, 77, 79,
+218, 220, 222, 225, 227, 230, 232, 234, 237, 239, 242, 244, 247, 249, 252, 255
-    80, 81, 82, 83, 85, 86, 87, 88, 90, 91,
+};
-    92, 94, 95, 96, 98, 99, 100, 102, 103, 105,
-    106, 108, 109, 110, 112, 113, 115, 116, 118, 120,
-    121, 123, 124, 126, 128, 129, 131, 132, 134, 136,
-    138, 139, 141, 143, 145, 146, 148, 150, 152, 154,
-    155, 157, 159, 161, 163, 165, 167, 169, 171, 173,
-    175, 177, 179, 181, 183, 185, 187, 189, 191, 193,
-    196, 198, 200, 202, 204, 207, 209, 211, 214, 216,
-    218, 220, 223, 225, 228, 230, 232, 235, 237, 240,
-    242, 245, 247, 250, 252, 255,
-    };
 #endif
 
 #ifdef USE_LED_BREATHING_TABLE
-const uint8_t LED_BREATHING_TABLE[] PROGMEM = {
+const uint8_t LED_BREATHING_TABLE[256] PROGMEM = {
   0, 0, 0, 0, 1, 1, 1, 2, 2, 3, 4, 5, 5, 6, 7, 9,
   10, 11, 12, 14, 15, 17, 18, 20, 21, 23, 25, 27, 29, 31, 33, 35,
   37, 40, 42, 44, 47, 49, 52, 54, 57, 59, 62, 65, 67, 70, 73, 76,

quantum/rgb_matrix_animations/solid_reactive_anim.h

@@ -15,7 +15,8 @@ bool rgb_matrix_solid_reactive(effect_params_t* params) {
   for (uint8_t i = led_min; i < led_max; i++) {
     RGB_MATRIX_TEST_LED_FLAGS();
     uint16_t tick = max_tick;
-    for(uint8_t j = 0; j < g_last_hit_tracker.count; j++) {
+    // Reverse search to find most recent key hit
+    for (int8_t j = g_last_hit_tracker.count - 1; j >= 0; j--) {
       if (g_last_hit_tracker.index[j] == i && g_last_hit_tracker.tick[j] < tick) {
         tick = g_last_hit_tracker.tick[j];
         break;