Add support for RGB LEDs wired directly to each half's controller (#5392)

* Add support for wiring RGB LEDs for both halves directly to their respective controllers

RGB LEDs for each half don't need to be chained together across the TRRS cable with this

* Add split RGB LED support for serial

* Update config/rules for bakingpy layout

* Un-nest ifdefs for hand detection

* Read RGB config state from memory instead of EEPROM for serial updates

* Reuse existing LED pointer instead of creating new one

docs/config_options.md

@@ -171,11 +171,15 @@ If you define these options you will enable the associated feature, which may in
 ## RGB Light Configuration
 
 * `#define RGB_DI_PIN D7`
-  * pin the DI on the ws2812 is hooked-up to
+  * pin the DI on the WS2812 is hooked-up to
 * `#define RGBLIGHT_ANIMATIONS`
   * run RGB animations
-* `#define RGBLED_NUM 15`
+* `#define RGBLED_NUM 12`
   * number of LEDs
+* `#define RGBLED_SPLIT { 6, 6 }`
+  * number of LEDs connected that are directly wired to `RGB_DI_PIN` on each half of a split keyboard
+  * First value indicates number of LEDs for left half, second value is for the right half
+  * Needed if both halves of the board have RGB LEDs wired directly to the RGB output pin on the controllers instead of passing the output of the left half to the input of the right half
 * `#define RGBLIGHT_HUE_STEP 12`
   * units to step when in/decreasing hue
 * `#define RGBLIGHT_SAT_STEP 25`
@@ -236,6 +240,9 @@ There are a few different ways to set handedness for split keyboards (listed in
 * `#define MATRIX_COL_PINS_RIGHT { <col pins> }`
   * If you want to specify a different pinout for the right half than the left half, you can define `MATRIX_ROW_PINS_RIGHT`/`MATRIX_COL_PINS_RIGHT`. Currently, the size of `MATRIX_ROW_PINS` must be the same as `MATRIX_ROW_PINS_RIGHT` and likewise for the definition of columns.
 
+* `#define RGBLED_SPLIT { 6, 6 }`
+  * See [RGB Light Configuration](#rgb-light-configuration)
+
 * `#define SELECT_SOFT_SERIAL_SPEED <speed>` (default speed is 1)
   * Sets the protocol speed when using serial communication
   * Speeds:

docs/feature_rgblight.md

@@ -23,10 +23,11 @@ RGBLIGHT_ENABLE = yes
 
 At minimum you must define the data pin your LED strip is connected to, and the number of LEDs in the strip, in your `config.h`. If your keyboard has onboard RGB LEDs, and you are simply creating a keymap, you usually won't need to modify these.
 
-|Define      |Description                                  |
+|Define         |Description                                                                                              |
-|------------|---------------------------------------------|
+|---------------|---------------------------------------------------------------------------------------------------------|
-|`RGB_DI_PIN`|The pin connected to the data pin of the LEDs|
+|`RGB_DI_PIN`   |The pin connected to the data pin of the LEDs                                                            |
-|`RGBLED_NUM`|The number of LEDs connected                 |
+|`RGBLED_NUM`   |The number of LEDs connected                                                                             |
+|`RGBLED_SPLIT` |(Optional) For split keyboards, the number of LEDs connected on each half directly wired to `RGB_DI_PIN` |
 
 Then you should be able to use the keycodes below to change the RGB lighting to your liking.
 

keyboards/hs60/v2/keymaps/stanrc85/keymap.c

@@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
 		KC_CTLE, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
 		KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
-		KC_LCTL, KC_LGUI, KC_LALT,          LT_SPCF,          KC_RALT, TD_TWIN, MO(3),   KC_RCTL),
+		KC_LCTL, KC_LGUI, KC_LALT,          LT_SPCF,          KC_RALT, TD_TWIN, MO(3),   TD_TCTL),
 
 	[1] = LAYOUT_60_ansi(
 		KC_GESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSPC,

keyboards/keebio/iris/rev3/config.h

@@ -71,6 +71,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN F7
 #define RGBLED_NUM 12    // Number of LEDs
+#define RGBLED_SPLIT { 6, 6 }
 
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 

keyboards/keebio/nyquist/rev3/config.h

@@ -56,6 +56,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN B4
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 12
+#define RGBLED_SPLIT { 6, 6 }
 
 /* Backlight LEDs */
 #define BACKLIGHT_PIN B5

keyboards/planck/keymaps/tom/config.h

@@ -0,0 +1,39 @@
+#pragma once
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+// Most tactile encoders have detents every 4 stages
+#define ENCODER_RESOLUTION 4
+

keyboards/planck/keymaps/tom/keymap.c

@@ -0,0 +1,297 @@
+/* Copyright 2015-2017 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "muse.h"
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  PLOVER,
+  BACKLIT,
+  EXT_PLV
+};
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |  Up  |Shift |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Brite| Ctrl | Alt  | GUI  |Lower |    Space    |Raise |   /  | Left | Down |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_planck_grid(
+    KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_UP,   KC_RSFT,
+    BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT
+),
+
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |  |   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  '   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home |  End |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Vol- | Vol+ |Brite-|Brite+|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_planck_grid(
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_PIPE,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_QUOT,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
+    _______, _______, _______, _______, _______, _______, _______, _______,    KC_VOLD,    KC_VOLU, KC_BRMD, KC_BRMU
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |  \   |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  '   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Vol- | Vol+ |Brite-|Brite+|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_planck_grid(
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS,
+    KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_QUOT,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_BRMD, KC_BRMU
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_planck_grid(
+    _______, RESET,   DEBUG,   RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD,  RGB_VAI, RGB_VAD, KC_DEL ,
+    _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  _______,  _______, _______, _______,
+    _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  TERM_ON, TERM_OFF, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______
+)
+
+};
+
+#ifdef AUDIO_ENABLE
+  float plover_song[][2]     = SONG(PLOVER_SOUND);
+  float plover_gb_song[][2]  = SONG(PLOVER_GOODBYE_SOUND);
+#endif
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        print("mode just switched to qwerty and this is a huge string\n");
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case BACKLIT:
+      if (record->event.pressed) {
+        register_code(KC_RSFT);
+        #ifdef BACKLIGHT_ENABLE
+          backlight_step();
+        #endif
+        #ifdef KEYBOARD_planck_rev5
+          PORTE &= ~(1<<6);
+        #endif
+      } else {
+        unregister_code(KC_RSFT);
+        #ifdef KEYBOARD_planck_rev5
+          PORTE |= (1<<6);
+        #endif
+      }
+      return false;
+      break;
+    case EXT_PLV:
+      if (record->event.pressed) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_PLOVER);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+bool muse_mode = false;
+uint8_t last_muse_note = 0;
+uint16_t muse_counter = 0;
+uint8_t muse_offset = 70;
+uint16_t muse_tempo = 50;
+
+void encoder_update(bool clockwise) {
+  if (muse_mode) {
+    if (IS_LAYER_ON(_RAISE)) {
+      if (clockwise) {
+        muse_offset++;
+      } else {
+        muse_offset--;
+      }
+    } else {
+      if (clockwise) {
+        muse_tempo+=1;
+      } else {
+        muse_tempo-=1;
+      }
+    }
+  } else {
+    if (clockwise) {
+      #ifdef MOUSEKEY_ENABLE
+        tap_code(KC_MS_WH_DOWN);
+      #else
+        tap_code(KC_PGDN);
+      #endif
+    } else {
+      #ifdef MOUSEKEY_ENABLE
+        tap_code(KC_MS_WH_UP);
+      #else
+        tap_code(KC_PGUP);
+      #endif
+    }
+  }
+}
+
+void dip_update(uint8_t index, bool active) {
+  switch (index) {
+    case 0:
+      if (active) {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_song);
+        #endif
+        layer_on(_ADJUST);
+      } else {
+        #ifdef AUDIO_ENABLE
+          PLAY_SONG(plover_gb_song);
+        #endif
+        layer_off(_ADJUST);
+      }
+      break;
+    case 1:
+      if (active) {
+        muse_mode = true;
+      } else {
+        muse_mode = false;
+        #ifdef AUDIO_ENABLE
+          stop_all_notes();
+        #endif
+      }
+   }
+}
+
+void matrix_scan_user(void) {
+  #ifdef AUDIO_ENABLE
+    if (muse_mode) {
+      if (muse_counter == 0) {
+        uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()];
+        if (muse_note != last_muse_note) {
+          stop_note(compute_freq_for_midi_note(last_muse_note));
+          play_note(compute_freq_for_midi_note(muse_note), 0xF);
+          last_muse_note = muse_note;
+        }
+      }
+      muse_counter = (muse_counter + 1) % muse_tempo;
+    }
+  #endif
+}
+
+bool music_mask_user(uint16_t keycode) {
+  switch (keycode) {
+    case RAISE:
+    case LOWER:
+      return false;
+    default:
+      return true;
+  }
+}
+
+void rgb_matrix_indicators_user(void) {
+  #ifdef RGB_MATRIX_ENABLE
+  rgb_led led;
+  switch (biton32(layer_state)) {
+    case _RAISE:
+      for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        led = g_rgb_leds[i];
+        if ( led.modifier ) {
+          rgb_matrix_set_color(i, 0x6B, 0x00, 0x80);
+        } else {
+          rgb_matrix_set_color(i, 0x00, 0xFF, 0x00);
+        }
+      }
+      break;
+
+    case _LOWER:
+      for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        led = g_rgb_leds[i];
+        if ( led.modifier ) {
+          rgb_matrix_set_color(i, 0xFF, 0xA5, 0x00);
+        } else {
+          rgb_matrix_set_color(i, 0x00, 0x67, 0xC7);
+        }
+      }
+      break;
+
+    case _ADJUST:
+      for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        rgb_matrix_set_color(i, 0xFF, 0x99, 0x00);
+      }
+      rgb_matrix_set_color(1, 0xFF, 0x00, 0x00);
+      break;
+
+    default:
+      break;
+  }
+  #endif
+}

keyboards/planck/keymaps/tom/readme.md

@@ -0,0 +1,31 @@
+# tomholford's layout
+
+This layout is data-driven: I installed [WhatPulse](https://whatpulse.org/) a few months ago and generated a heatmap of the most frequently used keys. I also optimized for my most-used programming languages, and muscle memory.
+
+## Changes from Default
+
+### QWERTY
+
+- swap escape and tab
+- rearrange arrows in original layout
+- swap rshift and Enter
+- map / to original location of left arrow key
+
+### RAISE
+
+- move backslash to backspace
+- map quote to original location from qwerty layer
+- map brightness up / down to original location of left and up arrows
+- map volume up / down to original location of down and right arrows
+
+### LOWER
+
+- move pipe to backspace
+- map quote to original location from qwerty layer
+- map brightness up / down to original location of left and up arrows
+- map volume up / down to original location of down and right arrows
+
+
+## RGB LED
+
+- Illuminate when pressing RAISE, LOWER, or ADJUST ([source](https://www.reddit.com/r/olkb/comments/8wvk8s/custom_rgb_configuration_by_keycodelayer/))

keyboards/planck/keymaps/tom/rules.mk

@@ -0,0 +1 @@
+SRC += muse.c

keyboards/westfoxtrot/cypher/config.h

@@ -0,0 +1,66 @@
+/*
+Copyright 2019 westfoxtrot
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x21FF
+#define PRODUCT_ID      0xAA97
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    westfoxtrot
+#define PRODUCT         cypher
+#define DESCRIPTION     Cypher
+
+/* key matrix size */
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, F6, B6, B7, C6, C7 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D4, D5, D6, D7, E6, F0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+#define GRAVE_ESC_CTRL_OVERRIDE

keyboards/westfoxtrot/cypher/cypher.c

@@ -0,0 +1,54 @@
+/* Copyright 2019 westfoxtrot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "cypher.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+void led_set_user(uint8_t usb_led) {
+    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+        writePinLow(F4);
+    } else {
+        writePinHigh(F4);
+    }
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+        writePinLow(F1);
+    } else {
+        writePinHigh(F1);
+    }
+    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+        writePinLow(F5);
+    } else {
+        writePinHigh(F5);
+    }
+}

keyboards/westfoxtrot/cypher/cypher.h

@@ -0,0 +1,68 @@
+/* Copyright 2019 westfoxtrot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define ___ KC_NO
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ansi( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K50, K51, K52, K53, K54, 		  K55, K56, K57, K58,\
+      K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K60, K61, K62, K63,     	  K65, K66, K67, K68,   \
+		K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K70, K71,      K73,         K75, K76, K77, K78,   \
+	K30,      K32, K33, K34, K35, K36, K37, K38, K39, K80, K81, K82, 		K83,      K85, K86, K87, K88,   \
+	K40, K41, K42,                   K46,            K49, K90, K91,    K92, K93, K95, K96, K97, K98   \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
+    { K30, ___, K32, K33, K34, K35, K36, K37, K38, K39 }, \
+    { K40, K41, K42, ___, ___, ___, K46, ___, ___, K49 }, \
+    { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \
+    { K60, K61, K62, K63, ___, K65, K66, K67, K68 }, \
+    { K70, K71, ___, K73, ___, K75, K76, K77, K78 }, \
+    { K80, K81, K82, K83, ___, K85, K86, K87, K88 }, \
+    { K90, K91, K92, K93, ___, K95, K96, K97, K98 } \
+}
+
+#define LAYOUT_iso( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K50, K51, K52, K53, K54, 		  K55, K56, K57, K58,\
+      K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K60, K61, K62,		     	  K65, K66, K67, K68,   \
+		K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K70, K71, K72, K73,         K75, K76, K77, K78,   \
+	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K80, K81, K82, 		K83,      K85, K86, K87, K88,   \
+	K40, K41, K42,                   K46,            K49, K90, K91,    K92, K93, K95, K96, K97, K98   \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39 }, \
+    { K40, K41, K42, ___, ___, ___, K46, ___, ___, K49 }, \
+    { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \
+    { K60, K61, K62, ___, ___, K65, K66, K67, K68 }, \
+    { K70, K71, K72, K73, ___, K75, K76, K77, K78 }, \
+    { K80, K81, K82, K83, ___, K85, K86, K87, K88 }, \
+    { K90, K91, K92, K93, ___, K95, K96, K97, K98 } \
+}

keyboards/westfoxtrot/cypher/info.json

@@ -0,0 +1,14 @@
+{
+  "keyboard_name": "Cypher",
+  "width": 19.5,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_ansi": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Num Lock", "x":15.5, "y":0}, {"label":"/", "x":16.5, "y":0}, {"label":"*", "x":17.5, "y":0}, {"label":"-", "x":18.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"7", "x":15.5, "y":1}, {"label":"8", "x":16.5, "y":1}, {"label":"9", "x":17.5, "y":1}, {"label":"+", "x":18.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"4", "x":15.5, "y":2}, {"label":"5", "x":16.5, "y":2}, {"label":"6", "x":17.5, "y":2}, {"label":"=", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"1", "x":15.5, "y":3}, {"label":"2", "x":16.5, "y":3}, {"label":"3", "x":17.5, "y":3}, {"label":"Enter", "x":18.5, "y":3}, {"label":"Up", "x":14.25, "y":3.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"label":"Space", "x":3.5, "y":4, "w":6}, {"label":"Alt", "x":9.5, "y":4, "w":1.25}, {"label":"Win", "x":10.75, "y":4}, {"label":"Ctrl", "x":11.75, "y":4, "w":1.25}, {"label":"0", "x":16.5, "y":4}, {"label":".", "x":17.5, "y":4}, {"label":"Backspace", "x":18.5, "y":4}, {"label":"Left", "x":13.25, "y":4.25}, {"label":"Down", "x":14.25, "y":4.25}, {"label":"Right", "x":15.25, "y":4.25}]
+    },
+
+    "LAYOUT_iso": {
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Num Lock", "x":15.5, "y":0}, {"label":"/", "x":16.5, "y":0}, {"label":"*", "x":17.5, "y":0}, {"label":"-", "x":18.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"7", "x":15.5, "y":1}, {"label":"8", "x":16.5, "y":1}, {"label":"9", "x":17.5, "y":1}, {"label":"+", "x":18.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"~", "x":12.75, "y":2}, {"label":"4", "x":15.5, "y":2}, {"label":"5", "x":16.5, "y":2}, {"label":"6", "x":17.5, "y":2}, {"label":"=", "x":18.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"1", "x":15.5, "y":3}, {"label":"2", "x":16.5, "y":3}, {"label":"3", "x":17.5, "y":3}, {"label":"Enter", "x":18.5, "y":3}, {"label":"Up", "x":14.25, "y":3.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"label":"Space", "x":3.5, "y":4, "w":6}, {"label":"Alt", "x":9.5, "y":4, "w":1.25}, {"label":"Win", "x":10.75, "y":4}, {"label":"Ctrl", "x":11.75, "y":4, "w":1.25}, {"label":"0", "x":16.5, "y":4}, {"label":".", "x":17.5, "y":4}, {"label":"Backspace", "x":18.5, "y":4}, {"label":"Left", "x":13.25, "y":4.25}, {"label":"Down", "x":14.25, "y":4.25}, {"label":"Right", "x":15.25, "y":4.25}]
+    }
+  }
+}

keyboards/westfoxtrot/cypher/keymaps/default-iso/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 westfoxtrot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/westfoxtrot/cypher/keymaps/default-iso/keymap.c

@@ -0,0 +1,49 @@
+/* Copyright 2019 westfoxtrot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _MA 0
+#define _F1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT_iso( /* Base */
+  KC_GESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC, KC_DEL, 	 	KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,\
+  KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,              	 	KC_P7,   KC_P8,   KC_P9,   KC_PPLS,\
+  KC_CAPS,    KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,	KC_QUOT,KC_NUHS,     KC_ENT,  	 	KC_P4,   KC_P5,   KC_P6,   KC_PEQL,\
+  KC_LSFT,KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT,  KC_SLSH,        KC_RSFT,        KC_UP,  	KC_P1,   KC_P2,   KC_P3,   KC_PENT,\
+  KC_LCTRL, KC_LGUI,KC_LALT,                KC_SPC,                        KC_RALT,KC_RGUI,MO(_F1),              KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,   KC_PDOT, KC_BSPC),
+
+[_F1] = LAYOUT_iso( /* Function Layer */
+  RESET,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,  KC_F12, _______, _______,		_______, _______, _______, _______,\
+  _______,   BL_TOGG,BL_STEP,BL_ON,BL_OFF,BL_INC,BL_DEC,BL_BRTG,_______,_______,_______,_______, _______,	    			_______, _______, _______, _______,\
+  _______,    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  _______,_______,_______,  	 	_______, _______, _______, _______,\
+  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,        _______,       _______,  	_______, _______, _______, _______,\
+  _______, _______,_______,                _______,                        _______,_______,_______,              _______,_______,_______,	_______, _______, _______),
+
+};
+
+void matrix_init_user(void) {
+  //user initialization
+}
+
+void matrix_scan_user(void) {
+  //user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}

keyboards/westfoxtrot/cypher/keymaps/default-iso/readme.md

@@ -0,0 +1 @@
+# The default iso keymap for cypher

keyboards/westfoxtrot/cypher/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 westfoxtrot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/westfoxtrot/cypher/keymaps/default/keymap.c

@@ -0,0 +1,49 @@
+/* Copyright 2019 westfoxtrot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _MA 0
+#define _F1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_MA] = LAYOUT_ansi( /* Base */
+  KC_GESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS, KC_EQL, KC_BSPC, KC_DEL, 	 	KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,\
+  KC_TAB,    KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC, KC_RBRC,	    KC_BSLS, 	 	KC_P7,   KC_P8,   KC_P9,   KC_PPLS,\
+  KC_CAPS,    KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,	KC_QUOT,             KC_ENT,  	 	KC_P4,   KC_P5,   KC_P6,   KC_PEQL,\
+  KC_LSFT,      KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT,  KC_SLSH,        KC_RSFT,        KC_UP,  	KC_P1,   KC_P2,   KC_P3,   KC_PENT,\
+  KC_LCTRL, KC_LGUI,KC_LALT,                KC_SPC,                        KC_RALT,KC_RGUI,MO(_F1),              KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,   KC_PDOT, KC_BSPC),
+
+[_F1] = LAYOUT_ansi( /* Function Layer */
+  RESET,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,  KC_F12, _______, _______,       _______, _______, _______, _______,\
+  _______,   BL_TOGG,BL_STEP,BL_ON,BL_OFF,BL_INC,BL_DEC,BL_BRTG,_______,_______,_______,_______, _______,	    _______, 	 	_______, _______, _______, _______,\
+  _______,    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  _______,             _______,  	 	_______, _______, _______, _______,\
+  _______,      _______,_______,_______,_______,_______,_______,_______,_______,_______, _______,        _______,       _______,  	_______, _______, _______, _______,\
+  _______, _______,_______,                _______,                        _______,_______,_______,              _______,_______,_______,    _______, _______, _______),
+
+};
+
+void matrix_init_user(void) {
+  //user initialization
+}
+
+void matrix_scan_user(void) {
+  //user matrix
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}

keyboards/westfoxtrot/cypher/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for cypher

keyboards/westfoxtrot/cypher/readme.md

@@ -0,0 +1,15 @@
+# cypher
+
+![cypher](https://github.com/westfoxtrot/Cypher_PCB)
+
+PCB for the cypher keyboard
+
+Keyboard Maintainer: [westfoxtrot](https://github.com/westfoxtrot)  
+Hardware Supported: Cypher PCB  
+Hardware Availability: with group buy + Files released here (https://github.com/westfoxtrot/Cypher_PCB)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make westfoxtrot/cypher:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/westfoxtrot/cypher/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

layouts/community/60_ansi/stanrc85-ansi/keymap.c

@@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 		KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
 		KC_CTLE, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
 		KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
-		KC_LCTL, KC_LGUI, KC_LALT,          LT_SPCF,          KC_RALT, TD_TWIN, MO(3),   KC_RCTL),
+		KC_LCTL, KC_LGUI, KC_LALT,          LT_SPCF,          KC_RALT, TD_TWIN, MO(3),   TD_TCTL),
 
 	[1] = LAYOUT_60_ansi(
 		KC_GESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8,    KC_9,   KC_0,    KC_MINS, KC_EQL,  KC_BSPC,

layouts/community/ortho_4x12/bakingpy/config.h

@@ -10,6 +10,7 @@
 #undef RGBLED_NUM
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 12
+#define RGBLED_SPLIT { 6, 6 }
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8

layouts/community/ortho_4x12/bakingpy/rules.mk

@@ -1,12 +1,13 @@
-# Enable RGB if not a Planck
+ifneq ($(LAYOUTS_HAS_RGB), no)
-ifeq ($(LAYOUTS_HAS_RGB),yes)
 	RGBLIGHT_ENABLE = yes
 endif
 AUDIO_ENABLE = no
 ifeq ($(strip $(KEYBOARD)), zlant)
   BACKLIGHT_ENABLE = no
 else ifeq ($(strip $(KEYBOARD)), 40percentclub/4x4)
-	  BACKLIGHT_ENABLE = no
+  BACKLIGHT_ENABLE = no
+else ifneq (, $(findstring lets_split, $(KEYBOARD)))
+  BACKLIGHT_ENABLE = no
 else
   BACKLIGHT_ENABLE = yes
 endif

quantum/rgblight.c

@@ -66,6 +66,15 @@ bool is_rgblight_initialized = false;
 LED_TYPE led[RGBLED_NUM];
 bool rgblight_timer_enabled = false;
 
+static uint8_t clipping_start_pos = 0;
+static uint8_t clipping_num_leds = RGBLED_NUM;
+
+void rgblight_set_clipping_range(uint8_t start_pos, uint8_t num_leds) {
+  clipping_start_pos = start_pos;
+  clipping_num_leds = num_leds;
+}
+
+
 void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) {
   uint8_t r = 0, g = 0, b = 0, base, color;
 
@@ -621,7 +630,7 @@ void rgblight_sethsv_at(uint16_t hue, uint8_t sat, uint8_t val, uint8_t index) {
   || defined(RGBLIGHT_EFFECT_SNAKE) || defined(RGBLIGHT_EFFECT_KNIGHT)
 
 static uint8_t get_interval_time(const uint8_t* default_interval_address, uint8_t velocikey_min, uint8_t velocikey_max) {
-  return 
+  return
 #ifdef VELOCIKEY_ENABLE
     velocikey_enabled() ? velocikey_match_speed(velocikey_min, velocikey_max) :
 #endif
@@ -668,21 +677,20 @@ void rgblight_sethsv_slave(uint16_t hue, uint8_t sat, uint8_t val) {
 
 #ifndef RGBLIGHT_CUSTOM_DRIVER
 void rgblight_set(void) {
+  LED_TYPE *start_led = led + clipping_start_pos;
+  uint16_t num_leds = clipping_num_leds;
   if (rgblight_config.enable) {
-      LED_TYPE *ledp;
     #ifdef RGBLIGHT_LED_MAP
       LED_TYPE led0[RGBLED_NUM];
       for(uint8_t i = 0; i < RGBLED_NUM; i++) {
           led0[i] = led[pgm_read_byte(&led_map[i])];
       }
-      ledp = led0;
+      start_led = led0 + clipping_start_pos;
-    #else
-      ledp = led;
     #endif
     #ifdef RGBW
-      ws2812_setleds_rgbw(ledp, RGBLED_NUM);
+      ws2812_setleds_rgbw(start_led, num_leds);
     #else
-      ws2812_setleds(ledp, RGBLED_NUM);
+      ws2812_setleds(start_led, num_leds);
     #endif
   } else {
     for (uint8_t i = 0; i < RGBLED_NUM; i++) {
@@ -691,9 +699,9 @@ void rgblight_set(void) {
       led[i].b = 0;
     }
     #ifdef RGBW
-      ws2812_setleds_rgbw(led, RGBLED_NUM);
+      ws2812_setleds_rgbw(start_led, num_leds);
     #else
-      ws2812_setleds(led, RGBLED_NUM);
+      ws2812_setleds(start_led, num_leds);
     #endif
   }
 }
@@ -813,7 +821,7 @@ void rgblight_effect_breathing(uint8_t interval) {
   float val;
 
   uint8_t interval_time = get_interval_time(&RGBLED_BREATHING_INTERVALS[interval], 1, 100);
-  
+
   if (timer_elapsed(last_timer) < interval_time) {
     return;
   }

quantum/rgblight.h

@@ -197,6 +197,7 @@ void rgblight_setrgb_master(uint8_t r, uint8_t g, uint8_t b);
 void rgblight_setrgb_slave(uint8_t r, uint8_t g, uint8_t b);
 void rgblight_sethsv_master(uint16_t hue, uint8_t sat, uint8_t val);
 void rgblight_sethsv_slave(uint16_t hue, uint8_t sat, uint8_t val);
+void rgblight_set_clipping_range(uint8_t start_pos, uint8_t num_leds);
 
 uint32_t eeconfig_read_rgblight(void);
 void eeconfig_update_rgblight(uint32_t val);

quantum/split_common/split_util.c

@@ -11,25 +11,25 @@
 #   include "eeconfig.h"
 #endif
 
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT)
+#include "rgblight.h"
+#endif
+
 volatile bool isLeftHand = true;
 
 __attribute__((weak))
 bool is_keyboard_left(void) {
-  #ifdef SPLIT_HAND_PIN
+  #if defined(SPLIT_HAND_PIN)
     // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
     setPinInput(SPLIT_HAND_PIN);
     return readPin(SPLIT_HAND_PIN);
-  #else
+  #elif defined(EE_HANDS)
-    #ifdef EE_HANDS
+    return eeprom_read_byte(EECONFIG_HANDEDNESS);
-      return eeprom_read_byte(EECONFIG_HANDEDNESS);
+  #elif defined(MASTER_RIGHT)
-    #else
+    return !is_keyboard_master();
-      #ifdef MASTER_RIGHT
-        return !is_keyboard_master();
-      #else
-        return is_keyboard_master();
-      #endif
-    #endif
   #endif
+
+  return is_keyboard_master();
 }
 
 bool is_keyboard_master(void)
@@ -71,6 +71,16 @@ void matrix_setup(void)
 {
   isLeftHand = is_keyboard_left();
 
+#if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT)
+  uint8_t num_rgb_leds_split[2] = RGBLED_SPLIT;
+  if (isLeftHand) {
+    rgblight_set_clipping_range(0, num_rgb_leds_split[0]);
+  }
+  else {
+    rgblight_set_clipping_range(num_rgb_leds_split[0], num_rgb_leds_split[1]);
+  }
+#endif
+
   if (is_keyboard_master())
   {
     keyboard_master_setup();

quantum/split_common/transport.c

@@ -92,12 +92,13 @@ typedef struct _Serial_m2s_buffer_t {
 #  ifdef BACKLIGHT_ENABLE
   uint8_t           backlight_level;
 #  endif
-#  if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+#  if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT)
   rgblight_config_t rgblight_config;  // not yet use
   //
   // When MCUs on both sides drive their respective RGB LED chains,
   // it is necessary to synchronize, so it is necessary to communicate RGB
-  // information. In that case, define the RGBLIGHT_SPLIT macro.
+  // information. In that case, define RGBLED_SPLIT with info on the number
+  // of LEDs on each half.
   //
   // Otherwise, if the master side MCU drives both sides RGB LED chains,
   // there is no need to communicate.
@@ -132,15 +133,20 @@ bool transport_master(matrix_row_t matrix[]) {
     matrix[i] = serial_s2m_buffer.smatrix[i];
   }
 
-#  if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
-  // Code to send RGB over serial goes here (not implemented yet)
-#  endif
-
 #  ifdef BACKLIGHT_ENABLE
   // Write backlight level for slave to read
   serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
 #  endif
 
+#  if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT)
+  static rgblight_config_t prev_rgb = {~0};
+  uint32_t rgb = rgblight_read_dword();
+  if (rgb != prev_rgb.raw) {
+    serial_m2s_buffer.rgblight_config.raw = rgb;
+    prev_rgb.raw = rgb;
+  }
+#  endif
+
   return true;
 }
 
@@ -152,8 +158,9 @@ void transport_slave(matrix_row_t matrix[]) {
 #  ifdef BACKLIGHT_ENABLE
   backlight_set(serial_m2s_buffer.backlight_level);
 #  endif
-#  if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
+#  if defined(RGBLIGHT_ENABLE) && defined(RGBLED_SPLIT)
-// Add serial implementation for RGB here
+  // Update RGB config with the new data
+  rgblight_update_dword(serial_m2s_buffer.rgblight_config.raw);
 #  endif
 }
 

users/stanrc85/stanrc85.c

@@ -1,13 +1,53 @@
 #include "stanrc85.h"
 
+static td_state_t td_state;
+
 __attribute__ ((weak))
 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
   return true;
 }
 
+// determine the tapdance state to return
+int cur_dance (qk_tap_dance_state_t *state) {
+  if (state->count == 1) {
+    if (state->interrupted || !state->pressed) { return SINGLE_TAP; }
+    else { return SINGLE_HOLD; }
+  }
+  if (state->count == 2) { return DOUBLE_TAP; }
+  else { return 3; } // any number higher than the maximum state value you return above
+}
+
+// handle the possible states for each tapdance keycode you define:
+void ctl_copy_finished (qk_tap_dance_state_t *state, void *user_data) {
+  td_state = cur_dance(state);
+  switch (td_state) {
+    case SINGLE_TAP:
+      SEND_STRING(SS_LCTRL("c"));
+      break;
+    case SINGLE_HOLD:
+      register_mods(MOD_BIT(KC_RCTL));
+      break;
+    case DOUBLE_TAP:
+      SEND_STRING(SS_LCTRL("v"));
+  }
+}
+
+void ctl_copy_reset (qk_tap_dance_state_t *state, void *user_data) {
+  switch (td_state) {
+    case SINGLE_TAP:
+      break;
+    case SINGLE_HOLD:
+      unregister_mods(MOD_BIT(KC_RCTL));
+      break;
+    case DOUBLE_TAP:
+      break;
+  }
+}
+
 qk_tap_dance_action_t tap_dance_actions[] = {
 	[TD_WIN] = ACTION_TAP_DANCE_DOUBLE(KC_CAD, KC_LOCK),
-	[TD_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_GRV)
+	[TD_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_GRV),
+  [TD_RCTL] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ctl_copy_finished, ctl_copy_reset)
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {

users/stanrc85/stanrc85.h

@@ -8,17 +8,6 @@
 #define LAYER2 2   //Function keys, arrows, custom shortcuts, volume control
 #define LAYER3 3   //RGB Underglow controls and RESET
 
-enum custom_keycodes {
-  KC_MAKE = SAFE_RANGE,
-  NEW_SAFE_RANGE  //use "NEW_SAFE_RANGE" for keymap specific codes
-};
-
-//Tap Dance Declarations
-enum {
-	TD_WIN = 0,
-	TD_ESC
-};
-
 //Aliases for longer keycodes
 #define KC_CAD	LALT(LCTL(KC_DEL))
 #define KC_LOCK	LGUI(KC_L)
@@ -28,3 +17,28 @@ enum {
 #define LT_SPCF LT(2, KC_SPC)
 #define TD_TESC TD(TD_ESC)
 #define TD_TWIN TD(TD_WIN)
+#define TD_TCTL TD(TD_RCTL)
+
+enum cust_keys {
+	KC_MAKE = SAFE_RANGE
+};
+
+enum tap_dance {
+  TD_WIN,
+  TD_ESC,
+  TD_RCTL
+};
+
+// define a type containing as many tapdance states as you need
+typedef enum {
+  SINGLE_TAP,
+  SINGLE_HOLD,
+  DOUBLE_TAP
+} td_state_t;
+
+// function to determine the current tapdance state
+int cur_dance (qk_tap_dance_state_t *state);
+
+// `finished` and `reset` functions for each tapdance keycode
+void ctl_copy_finished (qk_tap_dance_state_t *state, void *user_data);
+void ctl_copy_reset (qk_tap_dance_state_t *state, void *user_data);