Add samuel's literate keymap file for planck (#4998)

* added my own keymap

* changed thing

* updated keymap Samuel

* updated laypout for better one handed use

* updated stuff I want

* happy with my lagout

* formatting

* Added new literate config

* made everything nice

* cleaned

* fixed spelling and two small bugs in macros

* Made press and lift function for modifiers

docs/getting_started_build_tools.md

@@ -129,12 +129,12 @@ If you have trouble and want to ask for help, it is useful to generate a *Win_Ch
 
 ## Docker
 
-If this is a bit complex for you, Docker might be the turn-key solution you need. After installing [Docker CE](https://docs.docker.com/install/#supported-platforms), run the following command from the `qmk_firmware` directory to build a keyboard/keymap:
+If this is a bit complex for you, Docker might be the turnkey solution you need. After installing [Docker CE](https://docs.docker.com/install/#supported-platforms), run the following command from the `qmk_firmware` directory to build a keyboard/keymap:
 ```bash
-util/docker_build.sh keyboard:keymap 
+util/docker_build.sh keyboard:keymap
 # For example: util/docker_build.sh ergodox_ez:steno
 ```
-This will compile the targeted keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, the `default` keymap is used. Note that the parameter format is the same as when building with `make`.
+This will compile the desired keyboard/keymap and leave the resulting `.hex` or `.bin` file in the QMK directory for you to flash. If `:keymap` is omitted, the `default` keymap is used. Note that the parameter format is the same as when building with `make`.
 
 You can also start the script without any parameters, in which case it will ask you to input the build parameters one by one, which you may find easier to use:
 ```bash
@@ -147,7 +147,7 @@ There is also support for building _and_ flashing the keyboard straight from Doc
 util/docker_build.sh keyboard:keymap:target
 # For example: util/docker_build.sh planck/rev6:default:dfu-util
 ```
-If you're on Linux, this should work out of the box. On Windows and macOS, it requires [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/) to be running. This is tedious to set up, so it's not recommended; use QMK Toolbox instead.
+If you're on Linux, this should work out of the box. On Windows and macOS, it requires [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/) to be running. This is tedious to set up, so it's not recommended; use [QMK Toolbox](https://github.com/qmk/qmk_toolbox) instead.
 
 !> Docker for Windows requires [Hyper-V](https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/quick-start/enable-hyper-v) to be enabled. This means that it cannot work on versions of Windows which don't have Hyper-V, such as Windows 7, Windows 8 and **Windows 10 Home**.
 

keyboards/planck/keymaps/samuel/README.org

@@ -0,0 +1,431 @@
+#+Title: Samuel's Literate QMK Config
+#+PROPERTY: header-args :tangle ~/qmk_firmware/keyboards/planck/keymaps/samuel/keymap.c
+
+This is my qmk firmware for my keyboard. I grew tired of organizing the keycode
+array in plain text so I made it a literate .org file. I've never done this
+before, so bear with me.
+
+* Keymap
+
+#+BEGIN_COMMENT
+#+NAME: empty-layer
+| <6>    | <6>    | <6>    | <6>    | <6>    | <6>    | <6>    | <6>    | <6>    | <6>    | <6>    | <6>    |
+|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+| -      | -      | -      | -      | -      | -      | -      | -      | -      | -      | -      | -      |
+| -      | -      | -      | -      | -      | -      | -      | -      | -      | -      | -      | -      |
+| -      | -      | -      | -      | -      | -      | -      | -      | -      | -      | -      | -      |
+| -      | -      | -      | -      | -      | -      | -      | -      | -      | -      | -      | -      |
+|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+#+END_COMMENT
+
+This is my "pretty" org mode organized table for my main dvorak layer. If you
+don't use org mode, it won't be that exiting, but if you enjoy working in org
+mode, you can edit this table directly, and this file is tangled to the actual
+keymap. No more organizing spaces or converting to and from comments.
+
+#+NAME: home-layer
+|--------+--------+------+------+------+-----+-----+-----+------+-------+--------+--------|
+| T_LRSE | QUOT   | COMM | DOT  | P    | Y   | F   | G   | C    | R     | L      | T_RRSE |
+| T_LSFT | A      | O    | E    | U    | I   | D   | H   | T    | N     | S      | T_RSFT |
+| T_LCTL | SCLN   | Q    | J    | K    | X   | B   | M   | W    | V     | Z      | T_RCTL |
+| T_LGUI | T_LALT | UP   | DOWN | BSPC | TAB | ENT | SPC | LEFT | RIGHT | T_RALT | T_RGUI |
+|--------+--------+------+------+------+-----+-----+-----+------+-------+--------+--------|
+
+I tried to keep my layout bare bones, just what would be available on a normal
+keyboard, minus some keys I never used. The bottom left copies a normal
+keyboards symbols from shifted numbers, and the rest is placed where convenient,
+with some considerations for one handed use, hence the shortcuts in the top
+left.
+
+#+TODO: qwerty layer for ma friends
+
+#+NAME: secondary-layer
+|----+--------+--------+--------+--------+------+------+----+--------+--------+-----+----|
+| -- | EZUNDO | EZCOPY | EZCUT  | EZPSTE | INS  | EQL  |  7 |      8 |      9 | F11 | -- |
+| -- | ESC    | CAPS   | PGUP   | PGDN   | F4   | ASTR |  4 |      5 |      6 | 0   | -- |
+| -- | EXLM   | AT     | HASH   | DLR    | PERC | CIRC |  1 |      2 |      3 | F12 | -- |
+| -- | --     | EZUP   | EZDOWN | --     | AMPR | PIPE | -- | EZLEFT | EZRGHT | --  | -- |
+|----+--------+--------+--------+--------+------+------+----+--------+--------+-----+----|
+
+But wait, we are missing several important keys!? yes, well, the modifier keys
+all do other keys when tapped. More about that in the keymap section.
+
+* Keymap Conversion in Python
+
+This python can convert that table into the array needed for the keymap file. It
+simply prepends every key with "KC_". I used to use a dictionary to convert some
+keys from the table into qmk keycodes, but the double convertion was
+unneccessary so I simply prepended all my macros with KC and moved all the
+implementation to the `process-user-input` function.
+
+#+NAME:layer-to-array
+#+BEGIN_SRC python :var keys=secondary-layer :tangle no
+results = "{"
+row = 0
+while row < len(keys):
+  results += '{ '
+  key = 0
+  while key < len(keys[row]):
+    keyName = str(keys[row][key])
+    if keyName == '--':
+      keyName = 'TRANSPARENT'
+    results += 'KC_' + keyName
+    if key != 11:
+      results += ', '
+    key+=1
+  results += '}'
+  if row != 3:
+    results += ','
+  results += '\n'
+  row+=1
+results += '},\n'
+return results
+#+END_SRC
+
+* keymap.c
+
+Now that we have done all the hard work, lets layout our keymap file then define
+our macros.
+
+** Headers And Layer Declaration
+
+#+BEGIN_SRC C :noweb yes
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+static uint16_t tap_timers[10]  = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+char last_mod = -1;
+
+enum planck_layers {
+  _DVORAK,
+  _RISE
+};
+
+// where the 'T_' communicates how the key does something different when tapped.
+enum planck_keycodes {
+  DVORAK = SAFE_RANGE,
+  KC_T_LALT,
+  KC_T_RALT,
+  KC_T_LGUI,
+  KC_T_RGUI,
+  KC_T_LCTL,
+  KC_T_RCTL,
+  KC_T_LSFT,
+  KC_T_RSFT,
+  KC_T_LRSE,
+  KC_T_RRSE,
+  KC_EZRGHT,
+  KC_EZLEFT,
+  KC_EZUP,
+  KC_EZDOWN,
+  KC_EZUNDO,
+  KC_EZCOPY,
+  KC_EZCUT,
+  KC_EZPSTE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+#+END_SRC
+
+** Import Key table
+
+#+BEGIN_SRC C :noweb yes
+[_DVORAK] =
+
+#+END_SRC
+
+#+BEGIN_SRC C :noweb yes
+<<layer-to-array(home-layer)>>
+
+#+END_SRC
+
+#+BEGIN_SRC C :noweb yes
+[_RISE] =
+
+#+END_SRC
+
+#+BEGIN_SRC C :noweb yes
+<<layer-to-array(secondary-layer)>>
+
+#+END_SRC
+
+** Process User Input
+*** Tap Key Functionality
+
+These methods define how I implemented the tap mechanic. Basically, I believe
+that /pressing/ any other key should be grounds for the hold functionality to be
+assumed. My natuaral typing style experiences no delays from my method.
+
+#+BEGIN_SRC C :noweb yes
+};
+
+void mod_press(uint16_t hold_code, int id) {
+    tap_timers[id] = timer_read();
+    last_mod = id;
+    register_code(hold_code);
+}
+
+void mod_lift(uint16_t tap_code, uint16_t hold_code, int id) {
+    unregister_code(hold_code);
+    if (last_mod == id && timer_elapsed(tap_timers[id]) < TAPPING_TERM) {
+      tap_code16(tap_code);
+      last_mod = -1;
+    }
+}
+
+#+END_SRC
+
+*** Set DVORAK layout
+
+The function that filter's user inputs and applies macros, the begginning is
+pretty basic, setting our main layer and configuring our secondary layer.
+
+#+BEGIN_SRC C :noweb yes
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+
+#+END_SRC
+
+*** Alt  and ()
+
+Left and right alt are ( and ) when tapped. I put them on alt instead of a more
+conveniant key like control because parentheses do not need to be shift modified
+ever, unlike some other tap keys seen in the next sections.
+
+#+BEGIN_SRC C :noweb yes
+case KC_T_LALT:
+if (record->event.pressed) {
+  mod_press(KC_LALT, 0);
+ } else {
+  mod_lift(S(KC_9), KC_LALT, 0);
+ }
+return false;
+break;
+case KC_T_RALT:
+if (record->event.pressed) {
+  mod_press(KC_RALT, 1);
+ } else {
+  mod_lift(S(KC_0), KC_RALT, 1);
+ }
+return false;
+break;
+
+#+END_SRC
+
+*** Gui  and `\
+
+I place gui in the bottom corner because I believe it is the hardest key to
+reach, so gui seemed like a good fit for a dedicated key that I never want to
+have to spam. For tap keys, I used equally unused keys that are not apart of the
+number pad or shifted number keys.
+
+#+BEGIN_SRC C :noweb yes
+case KC_T_LGUI:
+if (record->event.pressed) {
+  mod_press(KC_LGUI, 2);
+ } else {
+  mod_lift(KC_GRAVE, KC_LGUI, 2);
+ }
+return false;
+break;
+case KC_T_RGUI:
+if (record->event.pressed) {
+  mod_press(KC_RGUI, 3);
+ } else {
+  mod_lift(KC_BSLASH, KC_RGUI, 3);
+ }
+return false;
+break;
+
+#+END_SRC
+
+*** Ctrl and []
+
+Left and right control are [] respectively when they are tapped, making { and }
+also very convenient.
+
+#+BEGIN_SRC C :noweb yes
+case KC_T_LCTL:
+if (record->event.pressed) {
+  mod_press(KC_LCTL, 4);
+ } else {
+  mod_lift(KC_LBRACKET, KC_LCTL, 4);
+ }
+return false;
+break;
+case KC_T_RCTL:
+if (record->event.pressed) {
+  mod_press(KC_RCTL, 5);
+ } else {
+  mod_lift(KC_RBRACKET, KC_RCTL, 5);
+ }
+return false;
+break;
+
+#+END_SRC
+
+*** Shft and =-
+
+I place shift on the home row, so having '-' right of my pinkie is standard, and
+it only felt natural to put its opposite, '=/+' on the other side. I put an
+extra one on the right side in the secondary layer for the num pad.
+
+#+BEGIN_SRC C :noweb yes
+case KC_T_LSFT:
+if (record->event.pressed) {
+  mod_press(KC_LSFT, 6);
+ } else {
+  mod_lift(KC_EQUAL, KC_LSFT, 6);
+ }
+return false;
+break;
+case KC_T_RSFT:
+if (record->event.pressed) {
+  mod_press(KC_RSFT, 7);
+ } else {
+  mod_lift(KC_MINUS, KC_RSFT, 7);
+ }
+return false;
+break;
+
+#+END_SRC
+
+*** Rise, DEL, and /
+
+I use the top corners as rise because I decided that I do not like using layers
+with my thumbs. It feels uncomfortable to hold keys down with the side of my
+thumb, and backspace, tab, enter, and spacebar keep them satisfied. My pinky is
+for holding modifiers, so it makes sense to put the layer key with the other
+modifiers. Both my left and right layer keys activate the same layer which also
+makes sense to me. You wouldn't want left and right shift to do different things
+
+I used to have escape in the top left, but I use delete a lot more, and putting
+escape under a layer has not been a problem at all. I put / in the top right
+corner again mimicing a standard dvorak keyboard.
+
+#+BEGIN_SRC C :noweb yes
+case KC_T_LRSE:
+if (record->event.pressed) {
+  tap_timers[8] = timer_read();
+  last_mod = 8;
+  layer_on(_RISE);
+ } else {
+  layer_off(_RISE);
+  if (last_mod == 8 && timer_elapsed(tap_timers[8]) < TAPPING_TERM) {
+    tap_code16(KC_DELETE);
+    last_mod = -1;
+  }
+ }
+return false;
+break;
+case KC_T_RRSE:
+if (record->event.pressed) {
+  tap_timers[9] = timer_read();
+  last_mod = 9;
+  layer_on(_RISE);
+ } else {
+  layer_off(_RISE);
+  if (last_mod == 9 && timer_elapsed(tap_timers[9]) < TAPPING_TERM) {
+    tap_code16(KC_SLASH);
+    last_mod = -1;
+  }
+ }
+return false;
+break;
+
+#+END_SRC
+
+*** EZ keys
+
+I use ctrl+shift+arrows keys a lot, so when the layer key is pressed they became
+lazy versions of themselves with control and shift already pressed.
+
+I also added undo, copy, paste, and cut to be easily available with only the
+left hand like on a qwerty or colemek keyboard.
+
+#+BEGIN_SRC C :noweb yes
+case KC_EZRGHT:
+if (record->event.pressed) {
+  register_code(KC_LCTL);
+  tap_code16(S(KC_RGHT));
+  unregister_code(KC_LCTL);
+  last_mod = -1;
+ }
+return false;
+break;
+case KC_EZLEFT:
+if (record->event.pressed) {
+  register_code(KC_LCTL);
+  tap_code16(S(KC_LEFT));
+  unregister_code(KC_LCTL);
+  last_mod = -1;
+ }
+return false;
+break;
+case KC_EZDOWN:
+if (record->event.pressed) {
+  register_code(KC_LCTL);
+  tap_code16(S(KC_DOWN));
+  unregister_code(KC_LCTL);
+  last_mod = -1;
+ }
+return false;
+break;
+case KC_EZUP:
+if (record->event.pressed) {
+  register_code(KC_LCTL);
+  tap_code16(S(KC_UP));
+  unregister_code(KC_LCTL);
+  last_mod = -1;
+ }
+return false;
+break;
+case KC_EZUNDO:
+if (record->event.pressed) {
+  tap_code16(C(KC_Z));
+  last_mod = -1;
+}
+return false;
+break;
+case KC_EZCOPY:
+if (record->event.pressed) {
+  tap_code16(C(KC_C));
+  last_mod = -1;
+}
+return false;
+break;
+case KC_EZCUT:
+if (record->event.pressed) {
+  tap_code16(C(KC_X));
+  last_mod = -1;
+}
+return false;
+break;
+case KC_EZPSTE:
+if (record->event.pressed) {
+  tap_code16(C(KC_P));
+  last_mod = -1;
+}
+return false;
+break;
+#+END_SRC
+
+*** Standard inputs interupt tap
+
+Finally, if just a standard key is tapped, set the interupted flag.
+
+#+BEGIN_SRC C :noweb yes
+  }
+  last_mod = -1;
+  return true;
+}
+#+END_SRC

keyboards/planck/keymaps/samuel/config.h

@@ -0,0 +1 @@
+#define TAPPING_TERM 250

keyboards/planck/keymaps/samuel/keymap.c

@@ -0,0 +1,245 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+static uint16_t tap_timers[10]  = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+
+char last_mod = -1;
+
+enum planck_layers {
+  _DVORAK,
+  _RISE
+};
+
+// where the 'T_' communicates how the key does something different when tapped.
+enum planck_keycodes {
+  DVORAK = SAFE_RANGE,
+  KC_T_LALT,
+  KC_T_RALT,
+  KC_T_LGUI,
+  KC_T_RGUI,
+  KC_T_LCTL,
+  KC_T_RCTL,
+  KC_T_LSFT,
+  KC_T_RSFT,
+  KC_T_LRSE,
+  KC_T_RRSE,
+  KC_EZRGHT,
+  KC_EZLEFT,
+  KC_EZUP,
+  KC_EZDOWN,
+  KC_EZUNDO,
+  KC_EZCOPY,
+  KC_EZCUT,
+  KC_EZPSTE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_DVORAK] =
+
+{{ KC_T_LRSE, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_T_RRSE},
+{ KC_T_LSFT, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_T_RSFT},
+{ KC_T_LCTL, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_T_RCTL},
+{ KC_T_LGUI, KC_T_LALT, KC_UP, KC_DOWN, KC_BSPC, KC_TAB, KC_ENT, KC_SPC, KC_LEFT, KC_RIGHT, KC_T_RALT, KC_T_RGUI}
+},
+
+[_RISE] =
+
+{{ KC_TRANSPARENT, KC_EZUNDO, KC_EZCOPY, KC_EZCUT, KC_EZPSTE, KC_INS, KC_EQL, KC_7, KC_8, KC_9, KC_F11, KC_TRANSPARENT},
+{ KC_TRANSPARENT, KC_ESC, KC_CAPS, KC_PGUP, KC_PGDN, KC_F4, KC_ASTR, KC_4, KC_5, KC_6, KC_0, KC_TRANSPARENT},
+{ KC_TRANSPARENT, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_1, KC_2, KC_3, KC_F12, KC_TRANSPARENT},
+{ KC_TRANSPARENT, KC_TRANSPARENT, KC_EZUP, KC_EZDOWN, KC_TRANSPARENT, KC_AMPR, KC_PIPE, KC_TRANSPARENT, KC_EZLEFT, KC_EZRGHT, KC_TRANSPARENT, KC_TRANSPARENT}
+},
+
+};
+
+void mod_press(uint16_t hold_code, int id) {
+    tap_timers[id] = timer_read();
+    last_mod = id;
+    register_code(hold_code);
+}
+
+void mod_lift(uint16_t tap_code, uint16_t hold_code, int id) {
+    unregister_code(hold_code);
+    if (last_mod == id && timer_elapsed(tap_timers[id]) < TAPPING_TERM) {
+      tap_code16(tap_code);
+      last_mod = -1;
+    }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+
+case KC_T_LALT:
+if (record->event.pressed) {
+  mod_press(KC_LALT, 0);
+ } else {
+  mod_lift(S(KC_9), KC_LALT, 0);
+ }
+return false;
+break;
+case KC_T_RALT:
+if (record->event.pressed) {
+  mod_press(KC_RALT, 1);
+ } else {
+  mod_lift(S(KC_0), KC_RALT, 1);
+ }
+return false;
+break;
+
+case KC_T_LGUI:
+if (record->event.pressed) {
+  mod_press(KC_LGUI, 2);
+ } else {
+  mod_lift(KC_GRAVE, KC_LGUI, 2);
+ }
+return false;
+break;
+case KC_T_RGUI:
+if (record->event.pressed) {
+  mod_press(KC_RGUI, 3);
+ } else {
+  mod_lift(KC_BSLASH, KC_RGUI, 3);
+ }
+return false;
+break;
+
+case KC_T_LCTL:
+if (record->event.pressed) {
+  mod_press(KC_LCTL, 4);
+ } else {
+  mod_lift(KC_LBRACKET, KC_LCTL, 4);
+ }
+return false;
+break;
+case KC_T_RCTL:
+if (record->event.pressed) {
+  mod_press(KC_RCTL, 5);
+ } else {
+  mod_lift(KC_RBRACKET, KC_RCTL, 5);
+ }
+return false;
+break;
+
+case KC_T_LSFT:
+if (record->event.pressed) {
+  mod_press(KC_LSFT, 6);
+ } else {
+  mod_lift(KC_EQUAL, KC_LSFT, 6);
+ }
+return false;
+break;
+case KC_T_RSFT:
+if (record->event.pressed) {
+  mod_press(KC_RSFT, 7);
+ } else {
+  mod_lift(KC_MINUS, KC_RSFT, 7);
+ }
+return false;
+break;
+
+case KC_T_LRSE:
+if (record->event.pressed) {
+  tap_timers[8] = timer_read();
+  last_mod = 8;
+  layer_on(_RISE);
+ } else {
+  layer_off(_RISE);
+  if (last_mod == 8 && timer_elapsed(tap_timers[8]) < TAPPING_TERM) {
+    tap_code16(KC_DELETE);
+    last_mod = -1;
+  }
+ }
+return false;
+break;
+case KC_T_RRSE:
+if (record->event.pressed) {
+  tap_timers[9] = timer_read();
+  last_mod = 9;
+  layer_on(_RISE);
+ } else {
+  layer_off(_RISE);
+  if (last_mod == 9 && timer_elapsed(tap_timers[9]) < TAPPING_TERM) {
+    tap_code16(KC_SLASH);
+    last_mod = -1;
+  }
+ }
+return false;
+break;
+
+case KC_EZRGHT:
+if (record->event.pressed) {
+  register_code(KC_LCTL);
+  tap_code16(S(KC_RGHT));
+  unregister_code(KC_LCTL);
+  last_mod = -1;
+ }
+return false;
+break;
+case KC_EZLEFT:
+if (record->event.pressed) {
+  register_code(KC_LCTL);
+  tap_code16(S(KC_LEFT));
+  unregister_code(KC_LCTL);
+  last_mod = -1;
+ }
+return false;
+break;
+case KC_EZDOWN:
+if (record->event.pressed) {
+  register_code(KC_LCTL);
+  tap_code16(S(KC_DOWN));
+  unregister_code(KC_LCTL);
+  last_mod = -1;
+ }
+return false;
+break;
+case KC_EZUP:
+if (record->event.pressed) {
+  register_code(KC_LCTL);
+  tap_code16(S(KC_UP));
+  unregister_code(KC_LCTL);
+  last_mod = -1;
+ }
+return false;
+break;
+case KC_EZUNDO:
+if (record->event.pressed) {
+  tap_code16(C(KC_Z));
+  last_mod = -1;
+}
+return false;
+break;
+case KC_EZCOPY:
+if (record->event.pressed) {
+  tap_code16(C(KC_C));
+  last_mod = -1;
+}
+return false;
+break;
+case KC_EZCUT:
+if (record->event.pressed) {
+  tap_code16(C(KC_X));
+  last_mod = -1;
+}
+return false;
+break;
+case KC_EZPSTE:
+if (record->event.pressed) {
+  tap_code16(C(KC_P));
+  last_mod = -1;
+}
+return false;
+break;
+
+  }
+  last_mod = -1;
+  return true;
+}

util/docker_build.sh

@@ -39,11 +39,12 @@ if [ -n "$target" ]; then
 	else
 		echo "Error: target requires docker-machine to work on your platform" >&2
 		echo "See http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos" >&2
+		echo "Consider flashing with QMK Toolbox (https://github.com/qmk/qmk_toolbox) instead" >&2
 		exit 3
 	fi
 fi
 dir=$(pwd -W 2>/dev/null) || dir=$PWD  # Use Windows path if on Windows
 
 # Run container and build firmware
-docker run --rm $usb_args -v "$dir":/qmk_firmware qmkfm/qmk_firmware \
+docker run --rm -it $usb_args -v "$dir":/qmk_firmware qmkfm/qmk_firmware \
 	make "$keyboard${keymap:+:$keymap}${target:+:$target}"

util/travis_compiled_push.sh

@@ -1,9 +1,6 @@
 #!/bin/bash
 
-TRAVIS_BRANCH="${TRAVIS_BRANCH:master}"
+source util/travis_push.sh
-TRAVIS_PULL_REQUEST="${TRAVIS_PULL_REQUEST:false}"
-TRAVIS_COMMIT_MESSAGE="${TRAVIS_COMMIT_MESSAGE:-none}"
-TRAVIS_COMMIT_RANGE="${TRAVIS_COMMIT_RANGE:-HEAD~1..HEAD}"
 
 set -o errexit -o nounset
 
@@ -12,17 +9,6 @@ echo "Using git hash ${rev}"
 
 if [[ "$TRAVIS_BRANCH" == "master" && "$TRAVIS_PULL_REQUEST" == "false" ]] ; then
 
-git config --global user.name "QMK Bot"
-git config --global user.email "[email protected]"
-
-openssl aes-256-cbc -K $encrypted_b0ee987fd0fc_key -iv $encrypted_b0ee987fd0fc_iv -in secrets.tar.enc -out secrets.tar -d
-tar xvf secrets.tar
-
-chmod 600 id_rsa_qmk_firmware
-chmod 600 id_rsa_qmk.fm
-eval `ssh-agent -s`
-ssh-add id_rsa_qmk_firmware
-
 # convert to unix line-endings
 git checkout master
 git diff --diff-filter=M --name-only -n 1 -z ${TRAVIS_COMMIT_RANGE} | xargs -0 dos2unix

util/travis_push.sh

@@ -5,13 +5,15 @@ TRAVIS_PULL_REQUEST="${TRAVIS_PULL_REQUEST:false}"
 TRAVIS_COMMIT_MESSAGE="${TRAVIS_COMMIT_MESSAGE:-none}"
 TRAVIS_COMMIT_RANGE="${TRAVIS_COMMIT_RANGE:-HEAD~1..HEAD}"
 
-git config --global user.name "QMK Bot"
+if [[ "$TRAVIS_BRANCH" == "master" && "$TRAVIS_PULL_REQUEST" == "false" ]] ; then
-git config --global user.email "[email protected]"
+	git config --global user.name "QMK Bot"
+	git config --global user.email "[email protected]"
 
-openssl aes-256-cbc -K $encrypted_b0ee987fd0fc_key -iv $encrypted_b0ee987fd0fc_iv -in secrets.tar.enc -out secrets.tar -d
+	openssl aes-256-cbc -K $encrypted_b0ee987fd0fc_key -iv $encrypted_b0ee987fd0fc_iv -in secrets.tar.enc -out secrets.tar -d
-tar xvf secrets.tar
+	tar xvf secrets.tar
 
-chmod 600 id_rsa_qmk_firmware
+	chmod 600 id_rsa_qmk_firmware
-chmod 600 id_rsa_qmk.fm
+	chmod 600 id_rsa_qmk.fm
-eval `ssh-agent -s`
+	eval `ssh-agent -s`
-ssh-add id_rsa_qmk_firmware
+	ssh-add id_rsa_qmk_firmware
+fi