Change return type of layer_switch_get_layer() to uint8_t (#5011)

* Change return type of layer_switch_get_layer() to uint8_t

* Keep loop index signed so we don't wrap around

Makefile

@@ -548,9 +548,10 @@ endif
 	# it has to be there to allow parallel execution of the submake
 	# This always tries to compile everything, even if error occurs in the middle
 	# But we return the error code at the end, to trigger travis failures
-	$(foreach COMMAND,$(COMMANDS),$(RUN_COMMAND))
+	# The sort at this point is to remove duplicates
+	$(foreach COMMAND,$(sort $(COMMANDS)),$(RUN_COMMAND))
 	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
-	$(foreach TEST,$(TESTS),$(RUN_TEST))
+	$(foreach TEST,$(sort $(TESTS)),$(RUN_TEST))
 	if [ -f $(ERROR_FILE) ]; then printf "$(MSG_ERRORS)" & exit 1; fi;
 
 # These no longer work because of the colon system

build_keyboard.mk

@@ -369,5 +369,6 @@ $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
 # Default target.
 all: build check-size
 build: elf cpfirmware
+check-size: build
 
 include $(TMK_PATH)/rules.mk

keyboards/1upkeyboards/1up60hte/1up60hte.c

@@ -0,0 +1,18 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "1up60hte.h"

keyboards/1upkeyboards/1up60hte/1up60hte.h

@@ -0,0 +1,36 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       \
+	K400, K401, K402,                   K406,                   K410, K411, K412, K413  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  KC_NO }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  KC_NO }, \
+	{ K400,  K401,  K402,  KC_NO, KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  K412,  K413 }  \
+}
+
+

keyboards/1upkeyboards/1up60hte/config.h

@@ -0,0 +1,67 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    1upkeyboards
+#define PRODUCT         1up60hte
+#define DESCRIPTION     A custom 60% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B3, B2, B1, B0, D4 }
+#define MATRIX_COL_PINS { F6, F5, F4, F1, E6, D0, D1, D2, D3, D5, D6, D7, B4, B5 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B7
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
+
+#define RGB_DI_PIN F0
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/1upkeyboards/1up60hte/keymaps/default/keymap.c

@@ -0,0 +1,80 @@
+/*
+Copyright 2019 Bubnick
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT(
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV,
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_NO,
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_LCTL, KC_NO),
+
+	[1] = LAYOUT(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
+
+void matrix_init_user(void) {
+  setPinOutput(B6);
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		writePinLow(B6);
+	} else {
+		writePinHigh(B6);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}

keyboards/1upkeyboards/1up60hte/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/1upkeyboards/sweet16/keymaps/sebas/keymap.c

@@ -0,0 +1,23 @@
+#include QMK_KEYBOARD_H
+#define ALT TG(_FUNC)
+
+enum layers {
+ _KEYP,
+ _FUNC
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_KEYP]=LAYOUT_ortho_4x4(
+  KC_P7, KC_P8,   KC_P9,   ALT,
+  KC_P4, KC_P5,   KC_P6,   KC_PAST,
+  KC_P1, KC_P2,   KC_P3,   KC_PMNS,
+  KC_P0, KC_PDOT, KC_PENT, KC_PPLS
+),
+[_FUNC]=LAYOUT_ortho_4x4(
+  KC_MPRV, KC_MPLY, KC_MNXT, _______,
+  XXXXXXX, XXXXXXX, XXXXXXX, KC_NLCK,
+  KC_INS,  KC_HOME, KC_PGUP, XXXXXXX,
+  KC_DEL,  KC_END,  KC_PGDN, XXXXXXX
+)
+};

keyboards/40percentclub/half_n_half/config.h

@@ -0,0 +1,244 @@
+/*
+Copyright 2019 Boy_314
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x4A1F
+#define MANUFACTURER    di0ib
+#define PRODUCT         half_n_half
+#define DESCRIPTION     A small split ortholinear custom keyboard with 2 thumb buttons
+
+/* key matrix size */
+#define MATRIX_ROWS 4*2
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/40percentclub/half_n_half/half_n_half.c

@@ -0,0 +1,43 @@
+/* Copyright 2019 Boy_314
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "half_n_half.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/40percentclub/half_n_half/half_n_half.h

@@ -0,0 +1,43 @@
+/* Copyright 2019 Boy_314
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06,     K50, K51, K52, K53, K54, K55, K56, \
+    K10, K11, K12, K13, K14, K15, K16,     K60, K61, K62, K63, K64, K65, K66, \
+    K20, K21, K22, K23, K24, K25, K26,     K70, K71, K72, K73, K74, K75, K76, \
+                        K34,                         K82 \
+) { \
+    { K00,   K01,   K02,   K03,   K04, K05,   K06   }, \
+    { K10,   K11,   K12,   K13,   K14, K15,   K16   }, \
+    { K20,   K21,   K22,   K23,   K24, K25,   K26   }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, K34, KC_NO, KC_NO }, \
+\
+    { K56,   K55,   K54,   K53,   K52, K51,   K50   }, \
+    { K66,   K65,   K64,   K63,   K62, K61,   K60   }, \
+    { K76,   K75,   K74,   K73,   K72, K71,   K70   }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, K82, KC_NO, KC_NO }  \
+}

keyboards/40percentclub/half_n_half/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 REPLACE_WITH_YOUR_NAME
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/40percentclub/half_n_half/keymaps/default/keymap.c

@@ -0,0 +1,65 @@
+/* Copyright 2019 Boy_314
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_GESC, KC_Q, KC_W, KC_E, KC_R,   KC_T, KC_LCTL, KC_RCTL, KC_Y, KC_U,   KC_I,    KC_O,   KC_P,    KC_BSPC, \
+    KC_TAB,  KC_A, KC_S, KC_D, KC_F,   KC_G, KC_LALT, KC_RALT, KC_H, KC_J,   KC_K,    KC_L,   KC_SCLN, KC_QUOT, \
+    KC_LSFT, KC_Z, KC_X, KC_C, KC_V,   KC_B, KC_LGUI, KC_APP,  KC_N, KC_M,   KC_COMM, KC_DOT, KC_SLSH, KC_ENT,  \
+                               KC_SPC,                               KC_SPC
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/40percentclub/half_n_half/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for half_n_half

keyboards/40percentclub/half_n_half/readme.md

@@ -0,0 +1,14 @@
+# half_n_half
+
+![half_n_half](https://2.bp.blogspot.com/-akouSRzGKQw/WutIH4qV0nI/AAAAAAACRqA/D1Gx3i1UWlccMCd0VS8td0ckWjCixrSuQCLcBGAs/s1600/b.jpg)
+
+A small split ortho board with two thumb keys
+
+Keyboard Maintainer: [Boy_314](https://github.com/boy-314)  
+Hardware Availability: http://www.40percent.club/2018/07/half-n-half.html
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 40percentclub/half_n_half:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/half_n_half/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/alice/config.h

@@ -29,10 +29,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COLS 15
 
 #define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5 }
-#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, C1 }
+#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
 #define DIODE_DIRECTION COL2ROW
 
-#define RGBLED_NUM 20
+#define RGBLED_NUM 18
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1

keyboards/canoe/readme.md

@@ -34,8 +34,8 @@ macOS:
 3. Install the following packages:
     ```
     brew install python
-    brew install pyusb
+    pip install pyusb
-    brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
 
 4. Place your keyboard into reset. 
 5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. 

keyboards/dztech/boards/GENERIC_STM32_F303XC/board.c

@@ -0,0 +1,126 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config = {
+#if STM32_HAS_GPIOA
+  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
+   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
+#endif
+#if STM32_HAS_GPIOB
+  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
+   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
+#endif
+#if STM32_HAS_GPIOC
+  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
+   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
+#endif
+#if STM32_HAS_GPIOD
+  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
+   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
+#endif
+#if STM32_HAS_GPIOE
+  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
+   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
+#endif
+#if STM32_HAS_GPIOF
+  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
+   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
+#endif
+#if STM32_HAS_GPIOG
+  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
+   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
+#endif
+#if STM32_HAS_GPIOH
+  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
+   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
+#endif
+#if STM32_HAS_GPIOI
+  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
+   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
+#endif
+};
+#endif
+
+void enter_bootloader_mode_if_requested(void);
+
+/**
+ * @brief   Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ *          and before any other initialization.
+ */
+void __early_init(void) {
+  enter_bootloader_mode_if_requested();
+  stm32_clock_init();
+}
+
+#if HAL_USE_SDC || defined(__DOXYGEN__)
+/**
+ * @brief   SDC card detection.
+ */
+bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   SDC card write protection detection.
+ */
+bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
+
+  (void)sdcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif /* HAL_USE_SDC */
+
+#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
+/**
+ * @brief   MMC_SPI card detection.
+ */
+bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return true;
+}
+
+/**
+ * @brief   MMC_SPI card write protection detection.
+ */
+bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
+
+  (void)mmcp;
+  /* TODO: Fill the implementation.*/
+  return false;
+}
+#endif
+
+/**
+ * @brief   Board-specific initialization code.
+ * @todo    Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}

keyboards/dztech/boards/GENERIC_STM32_F303XC/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

keyboards/dztech/dz60rgb/bootloader_defs.h

@@ -0,0 +1,7 @@
+/* Address for jumping to bootloader on STM32 chips. */
+/* It is chip dependent, the correct number can be looked up here:
+ * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+ * This also requires a patch to chibios:
+ *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+ */
+#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800

keyboards/dztech/dz60rgb/chconf.h

@@ -0,0 +1,520 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef CHCONF_H
+#define CHCONF_H
+
+#define _CHIBIOS_RT_CONF_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 100000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        TRUE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the trace buffer is activated.
+ *
+ * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
+
+/**
+ * @brief   Trace buffer entries.
+ * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
+ *          different from @p CH_DBG_TRACE_MASK_DISABLED.
+ */
+#define CH_DBG_TRACE_BUFFER_SIZE            128
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   ISR enter hook.
+ */
+#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
+  /* IRQ prologue code here.*/                                              \
+}
+
+/**
+ * @brief   ISR exit hook.
+ */
+#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
+  /* IRQ epilogue code here.*/                                              \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+  /* Idle-enter code here.*/                                                \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+  /* Idle-leave code here.*/                                                \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/**
+ * @brief   Trace hook.
+ * @details This hook is invoked each time a new record is written in the
+ *          trace buffer.
+ */
+#define CH_CFG_TRACE_HOOK(tep) {                                            \
+  /* Trace code here.*/                                                     \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* CHCONF_H */
+
+/** @} */

keyboards/dztech/dz60rgb/config.h

@@ -0,0 +1,36 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x1219
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    DOU
+#define PRODUCT         DZ60RGB
+#define DESCRIPTION     DZ60 ARM RGB keyboard
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+#define MATRIX_ROW_PINS { B1, B10, B11, B14, B12 }
+#define MATRIX_COL_PINS {A6, A7, B0, B13, B15, A8, A15, B3, B4, B5, B8, B9, C13, C14 }
+
+/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/
+
+#define DIODE_DIRECTION COL2ROW
+
+#define DEBOUNCE 3
+
+#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
+#define RGB_MATRIX_SKIP_FRAMES 0
+#define RGB_MATRIX_KEYPRESSES
+#define DISABLE_RGB_MATRIX_SPLASH
+#define DISABLE_RGB_MATRIX_MULTISPLASH
+#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#define DRIVER_ADDR_1 0b1010000
+#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
+
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 63
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL

keyboards/dztech/dz60rgb/dz60rgb.c

@@ -0,0 +1,172 @@
+#include "dz60rgb.h"
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ *   driver
+ *   |  R location
+ *   |  |       G location
+ *   |  |       |       B location
+ *   |  |       |       | */
+    {0, K_14,   J_14,   L_14},
+    {0, K_13,   J_13,   L_13},
+    {0, K_12,   J_12,   L_12},
+    {0, K_11,   J_11,   L_11},
+    {0, K_10,   J_10,   L_10},
+    {0, K_9,    J_9,    L_9},
+    {0, K_8,    J_8,    L_8},
+    {0, K_7,    J_7,    L_7},
+    {0, K_6,    J_6,    L_6},
+    {0, K_5,    J_5,    L_5},
+    {0, K_4,    J_4,    L_4},
+    {0, K_3,    J_3,    L_3},
+    {0, K_2,    J_2,    L_2},
+    {0, K_1,    J_1,    L_1},
+
+    {0, H_14,   G_14,   I_14},
+    {0, H_13,   G_13,   I_13},
+    {0, H_12,   G_12,   I_12},
+    {0, H_11,   G_11,   I_11},
+    {0, H_10,   G_10,   I_10},
+    {0, H_9,    G_9,    I_9},
+    {0, H_8,    G_8,    I_8},
+    {0, H_7,    G_7,    I_7},
+    {0, H_6,    G_6,    I_6},
+    {0, H_5,    G_5,    I_5},
+    {0, H_4,    G_4,    I_4},
+    {0, H_3,    G_3,    I_3},
+    {0, H_2,    G_2,    I_2},
+    {0, H_1,    G_1,    I_1},
+
+    {0, E_14,   D_14,   F_14},
+    {0, E_12,   D_12,   F_12},
+    {0, E_11,   D_11,   F_11},
+    {0, E_10,   D_10,   F_10},
+    {0, E_9,    D_9,    F_9},
+    {0, E_8,    D_8,    F_8},
+    {0, E_7,    D_7,    F_7},
+    {0, E_6,    D_6,    F_6},
+    {0, E_5,    D_5,    F_5},
+    {0, E_4,    D_4,    F_4},
+    {0, E_3,    D_3,    F_3},
+    {0, E_2,    D_2,    F_2},
+    {0, E_1,    D_1,    F_1},
+
+    {0, B_14,   A_14,   C_14},
+    {0, B_13,   A_13,   C_13},
+    {0, B_11,   A_11,   C_11},
+    {0, B_10,   A_10,   C_10},
+    {0, B_9,    A_9,    C_9},
+    {0, B_8,    A_8,    C_8},
+    {0, B_7,    A_7,    C_7},
+    {0, B_6,    A_6,    C_6},
+    {0, B_5,    A_5,    C_5},
+    {0, B_4,    A_4,    C_4},
+    {0, B_3,    A_3,    C_3},
+    {0, B_2,    A_2,    C_2},
+    {0, B_1,    A_1,    C_1},
+
+    {0, B_15,   A_15,   C_15},
+    {0, E_13,   D_13,   F_13},
+    {0, B_12,   A_12,   C_12},
+    {0, E_15,   D_15,   F_15},
+    {0, H_15,   G_15,   I_15},
+    {0, B_16,   A_16,   C_16},
+    {0, E_16,   D_16,   F_16},
+    {0, H_16,   G_16,   I_16},
+    {0, K_16,   J_16,   L_16},
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+    {{0|(13<<4)},   {17.23*13,  0}, 1},
+    {{0|(12<<4)},   {17.23*12,  0}, 1},
+    {{0|(11<<4)},   {17.23*11,  0}, 1},
+    {{0|(10<<4)},   {17.23*10,  0}, 1},
+    {{0|(9<<4)},    {17.23*9,  0}, 1},
+    {{0|(8<<4)},    {17.23*8,  0}, 1},
+    {{0|(7<<4)},    {17.23*7,  0}, 1},
+	{{0|(6<<4)},    { 17.23*6,  0}, 1},
+    {{0|(5<<4)},    { 17.23*5,  0}, 1},
+    {{0|(4<<4)},    { 17.23*4,  0}, 1},
+    {{0|(3<<4)},    { 17.23*3,  0}, 1},
+    {{0|(2<<4)},    { 17.23*2,  0}, 1},
+    {{0|(1<<4)},    { 17.23*1,  0}, 1},
+    {{0|(0<<4)},    { 17.23*0,  0}, 1},
+
+	{{1|(13<<4)},   {17.23*13,  16}, 1},
+    {{1|(12<<4)},   {17.23*12,  16}, 0},
+    {{1|(11<<4)},   {17.23*11,  16}, 0},
+    {{1|(10<<4)},   {17.23*10,  16}, 0},
+    {{1|(9<<4)},    {17.23*9,  16}, 0},
+    {{1|(8<<4)},    {17.23*8,  16}, 0},
+    {{1|(7<<4)},    {17.23*7,  16}, 0},
+	{{1|(6<<4)},    { 17.23*6,  16}, 0},
+    {{1|(5<<4)},    { 17.23*5,  16}, 0},
+    {{1|(4<<4)},    { 17.23*4,  16}, 0},
+    {{1|(3<<4)},    { 17.23*3,  16}, 0},
+    {{1|(2<<4)},    { 17.23*2,  16}, 0},
+    {{1|(1<<4)},    { 17.23*1,  16}, 0},
+    {{1|(0<<4)},    { 17.23*0,  16}, 1},
+
+	{{2|(13<<4)},   {17.23*13,  32}, 1},
+    {{2|(11<<4)},   {17.23*11,  32}, 0},
+    {{2|(10<<4)},   {17.23*10,  32}, 0},
+    {{2|(9<<4)},    {17.23*9,  32}, 0},
+    {{2|(8<<4)},    {17.23*8,  32}, 0},
+    {{2|(7<<4)},    {17.23*7,  32}, 0},
+	{{2|(6<<4)},    { 17.23*6,  32}, 0},
+    {{2|(5<<4)},    { 17.23*5,  32}, 0},
+    {{2|(4<<4)},    { 17.23*4,  32}, 0},
+    {{2|(3<<4)},    { 17.23*3,  32}, 0},
+    {{2|(2<<4)},    { 17.23*2,  32}, 0},
+    {{2|(1<<4)},    { 17.23*1,  32}, 0},
+    {{2|(0<<4)},    { 17.23*0,  32}, 1},
+
+	{{3|(13<<4)},   {17.23*13,  48}, 1},
+    {{3|(11<<4)},   {17.23*11,  48}, 0},
+    {{3|(10<<4)},   {17.23*10,  48}, 0},
+    {{3|(9<<4)},    {17.23*9,  48}, 0},
+    {{3|(8<<4)},    {17.23*8,  48}, 0},
+    {{3|(7<<4)},    {17.23*7,  48}, 0},
+	{{3|(6<<4)},    { 17.23*6,  48}, 0},
+    {{3|(5<<4)},    { 17.23*5,  48}, 0},
+    {{3|(4<<4)},    { 17.23*4,  48}, 0},
+    {{3|(3<<4)},    { 17.23*3,  48}, 0},
+    {{3|(2<<4)},    { 17.23*2,  48}, 0},
+    {{3|(1<<4)},    { 17.23*1,  48}, 0},
+    {{3|(0<<4)},    { 17.23*0,  48}, 1},
+
+	{{4|(13<<4)},   {17.23*13,  64}, 1},
+    {{4|(11<<4)},   {17.23*11,  64}, 1},
+    {{4|(10<<4)},   {17.23*10,  64}, 1},
+    {{4|(9<<4)},    {17.23*9,  64}, 1},
+    {{4|(8<<4)},    {17.23*8,  64}, 1},
+    {{4|(5<<4)},    { 17.23*5,  64}, 0},
+    {{4|(2<<4)},    { 17.23*2,  64}, 1},
+    {{4|(1<<4)},    { 17.23*1,  64}, 1},
+    {{4|(0<<4)},    { 17.23*0,  64}, 1},
+
+};
+
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    return process_record_user(keycode, record);
+}
+
+
+void suspend_power_down_kb(void)
+{
+    rgb_matrix_set_suspend_state(true);
+}
+
+void suspend_wakeup_init_kb(void)
+{
+    rgb_matrix_set_suspend_state(false);
+}

keyboards/dztech/dz60rgb/dz60rgb.h

@@ -0,0 +1,16 @@
+#pragma once
+#define XXX KC_NO
+#include "quantum.h"
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,      K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, \
+    K40, K41, K42,           K45,           K48, K49, K4A, K4B,      K4D  \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
+    { K40, K41, K42, XXX, XXX, K45, XXX, XXX, K48, K49, K4A, K4B, XXX, K4D }  \
+}

keyboards/dztech/dz60rgb/halconf.h

@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef HALCONF_H
+#define HALCONF_H
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the QSPI subsystem.
+ */
+#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
+#define HAL_USE_QSPI                FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     1
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                TRUE
+#endif
+
+#endif /* HALCONF_H */
+
+/** @} */

keyboards/dztech/dz60rgb/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "dz60rgb",
+  "url": "",
+  "maintainer": "dztch",
+  "width": 14,
+  "height": 5,
+  "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"\u2191", "x":13, "y":3},{"label":"?", "x":14, "y":3},	{"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4}, {"label":"Ctrl", "x":11, "y":4}, {"label":"\u2190", "x":12, "y":4}, {"label":"\u2193", "x":13, "y":4}, {"label":"\u2192", "x":14, "y":4}]
+						 }
+		}
+}

keyboards/dztech/dz60rgb/keymaps/default/keymap.c

@@ -0,0 +1,165 @@
+#include QMK_KEYBOARD_H
+extern bool g_suspend_state;
+#define _LAYER0 0
+#define _LAYER1 1
+#define _LAYER2 2
+#define _LAYER3 3
+#define _LAYER4 4
+#define _LAYER5 5
+#define _LAYER6 6
+#define _LAYER7 7
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+		[_LAYER0] = LAYOUT( /* Base */
+			KC_GESC,  KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,    KC_9,     KC_0,            KC_MINS,  KC_EQL,  KC_BSPC,\
+		    KC_TAB,   KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,  KC_I,    KC_O,     KC_P,            KC_LBRC,  KC_RBRC, KC_BSLASH,\
+			CTL_T(KC_CAPS),  KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,  KC_K,    KC_L,     KC_SCLN,         KC_QUOT,           KC_ENT, \
+		    KC_LSFT,  KC_Z,     KC_X,     KC_C,  KC_V,  KC_B,  KC_N,    KC_M,  KC_COMM, KC_DOT,   RSFT_T(KC_SLSH), KC_UP,             LT(2, KC_DEL),\
+		    KC_LCTL,  KC_LGUI,  LM(1, MOD_LALT),                KC_SPC,                KC_RALT,  MO(1)  , KC_LEFT,         KC_DOWN,           KC_RIGHT),
+		[_LAYER1] = LAYOUT( /* FN */
+		    TO(3),    KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_DEL ,\
+		    KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_CALC,  KC_TRNS,  KC_INS,   KC_TRNS,  KC_PSCR,  KC_SLCK,  KC_PAUS,  RESET  ,\
+		    KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_HOME,  KC_PGUP,            KC_TRNS,\
+		    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_END,   KC_PGDOWN,KC_VOLU,            KC_MUTE,\
+			KC_TRNS,  KC_TRNS,  KC_TRNS,                      TO(4),                        KC_TRNS,  KC_TRNS,  KC_MPRV,  KC_VOLD,            KC_MNXT),
+		[_LAYER2] = LAYOUT( /* LIGHT */
+			KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   KC_DEL ,\
+			KC_TRNS,  RGB_TOG,  KC_TRNS,  RGB_HUI,  RGB_HUD,  RGB_SAI,  RGB_SAD,  RGB_VAI,  RGB_VAD,  RGB_MOD,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RESET  ,\
+			KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RGB_SPI,  RGB_SPD,  KC_TRNS,  KC_TRNS,            KC_TRNS,\
+			KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,            KC_TRNS,\
+			KC_TRNS,  KC_TRNS,  KC_TRNS,                      KC_TRNS,                      KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,            KC_TRNS),
+		[_LAYER3] = LAYOUT( /* NUMPAD */
+			KC_NLCK,  KC_PSLS,  KC_PAST,  KC_PMNS,  KC_PPLS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_PSLS,  KC_PAST,  KC_PMNS,  KC_PPLS,  KC_TRNS,\
+			KC_TRNS,  KC_P7,    KC_P8,    KC_P9,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_P7,    KC_P8,    KC_P9,    KC_TRNS,  KC_TRNS,  TO(0),\
+			KC_TRNS,  KC_P4,    KC_P5,    KC_P6,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_P4,    KC_P5,    KC_P6,    KC_TRNS,            KC_PENT,\
+			KC_TRNS,  KC_P1,    KC_P2,    KC_P3,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_P1,    KC_P2,    KC_P3,    KC_TRNS,            KC_TRNS,\
+			KC_TRNS,  KC_P0,    KC_PDOT,                      KC_PENT,                      KC_P0,    KC_PDOT,  KC_TRNS,  KC_TRNS,            KC_TRNS),
+		[_LAYER4] = LAYOUT( /* MAC */
+			KC_GESC,  KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,    KC_9,     KC_0,            KC_MINS,  KC_EQL,  KC_BSPC,\
+		    KC_TAB,   KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,  KC_I,    KC_O,     KC_P,            KC_LBRC,  KC_RBRC, KC_BSLASH,\
+			CTL_T(KC_CAPS),  KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,  KC_K,    KC_L,     KC_SCLN,         KC_QUOT,           KC_ENT, \
+		    KC_LSFT,  KC_Z,     KC_X,     KC_C,  KC_V,  KC_B,  KC_N,    KC_M,  KC_COMM, KC_DOT,   RSFT_T(KC_SLSH), KC_UP,             LT(2, KC_DEL),\
+			KC_LCTL,  KC_LALT,  KC_LGUI,                KC_SPC,                KC_RALT,  MO(5)  , KC_LEFT,         KC_DOWN,           KC_RIGHT),
+		};
+
+
+
+void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) {
+  rgb_led led;
+  for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+    led = g_rgb_leds[i];
+    if (led.matrix_co.raw < 0xFF) {
+      if (led.modifier) {
+          rgb_matrix_set_color( i, red, green, blue );
+      }
+    }
+  }
+}
+
+void rgb_matrix_indicators_user(void) {
+	  uint8_t this_led = host_keyboard_leds();
+	  if (!g_suspend_state) {
+	    switch (biton32(layer_state)) {
+	      case _LAYER1:
+		    rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break;
+	      case _LAYER2:
+	        rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break;
+	      case _LAYER4:
+	        rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break;
+	    							  }
+	                        }
+	  if ( this_led & (1<<USB_LED_CAPS_LOCK)) {
+	        rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF);
+	  }
+
+	  switch (biton32(layer_state)) {
+	      case _LAYER3:
+	      	  if ( this_led & (1<<USB_LED_NUM_LOCK))
+	      	  {
+	    	 	  rgb_matrix_set_color(13, 0xFF, 0x00, 0x00);
+	      	  }
+	    	  else
+	    	  {
+	    		  rgb_matrix_set_color(13, 0x00, 0x00, 0x00);
+	    	  }
+	  	    rgb_matrix_set_color(0, 0x00, 0xFF, 0x00);
+		    rgb_matrix_set_color(1, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(1, 0x00, 0xFF, 0x00);
+	        rgb_matrix_set_color(2, 0x00, 0xFF, 0x00);
+	        rgb_matrix_set_color(3, 0x00, 0xFF, 0x00);
+	        rgb_matrix_set_color(4, 0x00, 0xFF, 0x00);
+	        rgb_matrix_set_color(5, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(6, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(7, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(8, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(9, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(10, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(11, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(12, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(14, 0x00, 0x00, 0xFF);
+	        rgb_matrix_set_color(15, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(16, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(17, 0x00, 0xFF, 0x00);
+	       	rgb_matrix_set_color(18, 0x00, 0xFF, 0x00);
+	       	rgb_matrix_set_color(19, 0x00, 0xFF, 0x00);
+	        rgb_matrix_set_color(20, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(21, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(22, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(23, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(24, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(25, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(26, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(27, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(28, 0x00, 0xFF, 0x00);
+	        rgb_matrix_set_color(29, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(30, 0x00, 0xFF, 0x00);
+	        rgb_matrix_set_color(31, 0x00, 0xFF, 0x00);
+	        rgb_matrix_set_color(32, 0x00, 0xFF, 0x00);
+	        rgb_matrix_set_color(33, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(34, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(35, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(36, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(37, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(38, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(39, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(40, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(41, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(42, 0x00, 0x00, 0x00);
+	       	rgb_matrix_set_color(43, 0x00, 0xFF, 0x00);
+	       	rgb_matrix_set_color(44, 0x00, 0xFF, 0x00);
+	       	rgb_matrix_set_color(45, 0x00, 0xFF, 0x00);
+	        rgb_matrix_set_color(46, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(47, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(48, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(49, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(50, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(51, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(52, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(53, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(54, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(55, 0x00, 0x00, 0x00);
+	        rgb_matrix_set_color(56, 0x00, 0x00, 0x00);
+	       	rgb_matrix_set_color(57, 0x00, 0xFF, 0x00);
+	       	rgb_matrix_set_color(58, 0x00, 0xFF, 0x00);
+	        rgb_matrix_set_color(59, 0xFF, 0x00, 0x00);
+	        rgb_matrix_set_color(60, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(61, 0xFF, 0xFF, 0x00);
+	        rgb_matrix_set_color(62, 0x00, 0x00, 0x00);
+	        break;
+	    }
+}
+
+
+
+
+
+void matrix_init_user(void) {
+  //user initialization
+}
+
+void matrix_scan_user(void) {
+  //user matrix
+}
+
+	bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	  return true;
+	}

keyboards/dztech/dz60rgb/mcuconf.h

@@ -0,0 +1,257 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef MCUCONF_H
+#define MCUCONF_H
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_UART4SW                       STM32_UART4SW_PCLK
+#define STM32_UART5SW                       STM32_UART5SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+#undef STM32_HSE_BYPASS
+// #error "oh no"
+// #endif
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_USE_ADC4                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC4_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC4_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  TRUE
+#define STM32_GPT_USE_TIM7                  TRUE
+#define STM32_GPT_USE_TIM8                  TRUE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  TRUE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* MCUCONF_H */

keyboards/dztech/dz60rgb/readme.md

@@ -0,0 +1,15 @@
+# DZ60RGB
+
+![dz60rgb](https://cdn.shopify.com/s/files/1/0043/9140/3591/products/TIM_20190130170231_grande.jpg?v=1548839053)
+
+A customizable 60% RGB keyboard.
+
+Keyboard Maintainer: DZtech  
+Hardware Supported: DZtech
+Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make dztech/dz60rgb:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/dztech/dz60rgb/rules.mk

@@ -0,0 +1,57 @@
+# project specific files
+
+## chip/board settings
+#   the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F3xx
+
+# Linker script to use
+#   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F303xC
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f3xx
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = GENERIC_STM32_F303XC
+
+# Cortex version
+MCU  = cortex-m4
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+
+USE_FPU = yes
+
+# Vector table for application
+# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
+OPT_DEFS =
+
+# Do not put the microcontroller into power saving mode
+# when we get USB suspend event. We want it to keep updating
+# backlight effects.
+OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
+
+# Options to pass to dfu-util when flashing
+DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
+# Build Options
+#   comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes              # Mouse keys
+EXTRAKEY_ENABLE = yes              # Audio control and System control
+CONSOLE_ENABLE = no                # Console for debug
+COMMAND_ENABLE = no                # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes            # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no                 # USB Nkey Rollover
+AUDIO_ENABLE = no
+RGB_MATRIX_ENABLE = IS31FL3733     # Use RGB matrix
+NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in

keyboards/gray_studio/cod67/readme.md

@@ -1,7 +1,5 @@
 # Gray COD67
 
-![cod67](imgur.com image replace me!)
-
 The Gray COD67 is a 60% keyboard with a modern and bold design. It features 20 RGB Underglow LED lights and a unique diffuser placement. The COD67 has the most stunning RGB light strip for a custom mechanical keyboard. It also features a center mounted USB C port. 
 
 There were only 75 units made worldwide. 
@@ -18,9 +16,9 @@ The COD67 will show up as a drive.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make cod67:default:bin
+    make gray_studio/cod67:default:bin
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 
 Rename the resulting `.bin` file to `cod67.bin`.
 

keyboards/gray_studio/readme.md

@@ -0,0 +1 @@
+# Gray Studio

keyboards/gray_studio/space65/config.h

@@ -0,0 +1,244 @@
+/*
+Copyright 2019 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Gray Studio
+#define PRODUCT         Space65
+#define DESCRIPTION     65% custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, F0, F4, F1 }
+#define MATRIX_COL_PINS { B0, B3, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 6
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/gray_studio/space65/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Gray Studio Space65", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 16, 
+    "height": 5, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
+        }
+    }
+}

keyboards/gray_studio/space65/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/gray_studio/space65/keymaps/default/keymap.c

@@ -0,0 +1,73 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+  QMKBEST = SAFE_RANGE,
+  QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( \
+        KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_DEL, \
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_INS,          \
+        KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGUP,                  \
+        KC_LSFT, KC_LSFT, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,         \
+        KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC, KC_SPC, KC_SPC,         KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT                   \
+    ),
+[1] = LAYOUT( \
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_MUTE, \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS,          \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU,                   \
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_VOLD,          \
+        KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END                     \
+    ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QMKBEST:
+      if (record->event.pressed) {
+        // when keycode QMKBEST is pressed
+        SEND_STRING("QMK is the best thing ever!");
+      } else {
+        // when keycode QMKBEST is released
+      }
+      break;
+    case QMKURL:
+      if (record->event.pressed) {
+        // when keycode QMKURL is pressed
+        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+      } else {
+        // when keycode QMKURL is released
+      }
+      break;
+  }
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/gray_studio/space65/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for space65

keyboards/gray_studio/space65/readme.md

@@ -0,0 +1,15 @@
+# Gray Studio Space65
+
+A 65% keyboard with RGB underglow, backlighting, and USB C. Its design was inspired by the Voyager I space probe and Apple II home computer.
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Gray Studio Space65  
+Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=98768.0)
+
+**Reset Sequence:** Using this firmware sets `BOOTLOADER_ENABLE` to `lite`. While plugging in, hold the top left key, commonly programmed as `Esc` to put your board into bootloader mode. 
+
+Make example for this keyboard (after setting up your build environment):
+
+    make gray_studio/space65:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/gray_studio/space65/rules.mk

@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/gray_studio/space65/space65.c

@@ -0,0 +1,48 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "space65.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+    writePinHigh(E6);
+  } else {
+    writePinLow(E6);
+  }
+
+	led_set_user(usb_led);
+}

keyboards/gray_studio/space65/space65.h

@@ -0,0 +1,42 @@
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \
+    k10, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F,      \
+    k20, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2F,           \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3D, k3E, k3F,      \
+    k40, k41,      k43,      k45,      k47, k48,      k4A, k4B, k4D, k4E, k4F       \
+) \
+{ \
+    { k00, k01,   k02,   k03, k04,   k05, k06,   k07, k08, k09,   k0A, k0B, k0C,   k0D, k0E,   k0F }, \
+    { k10, KC_NO, k12,   k13, k14,   k15, k16,   k17, k18, k19,   k1A, k1B, k1C,   k1D, k1E,   k1F }, \
+    { k20, KC_NO, k22,   k23, k24,   k25, k26,   k27, k28, k29,   k2A, k2B, k2C,   k2D, KC_NO, k2F }, \
+    { k30, k31,   k32,   k33, k34,   k35, k36,   k37, k38, k39,   k3A, k3B, KC_NO, k3D, k3E,   k3F }, \
+    { k40, k41,   KC_NO, k43, KC_NO, k45, KC_NO, k47, k48, KC_NO, k4A, k4B, KC_NO, k4D, k4E,   k4F }, \
+}
+

keyboards/jj40/README.md

@@ -69,3 +69,16 @@ Windows sometimes doesn't recognize the jj40. The easiest way of flashing a new
 3. If you get an error such as "Resource Unavailable" when attemting to flash
    on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md`
    for more info.
+
+## Recovery 
+If you flash a bad hex (e.g. you have a V1 board without RGB and compile/flash blindly without editing your rules.mk), your jj40 is now semi-bricked and you're stuck unless you have access to an ISP. The [ISP Flashing Guide](https://docs.qmk.fm/#/isp_flashing_guide) contains very good (but somewhat generalized) information. However, the instructions below should get you up and running provided you have an Arduino or clone.
+
+### Arduino Setup 
+1. Upload the ArduinoISP sketch onto your Arduino board (https://www.arduino.cc/en/Tutorial/ArduinoISP).  
+2. Wire the Arduino to the jj40. Match the data pins on the Arduino to those on the jj40. "RST" usually goes to D10 on the Arduino. I didn't need a capacitor when using my Uno. 
+![Imgur](https://i.imgur.com/oLWJOkQ.jpg)
+3. Get a working bootloader from https://blog.winkeyless.kr/m/152. The file is called "main.hex" from the archive called "ps2avrGB_bootloader_161215.zip"  Copy "main.hex" to your qmk folder.  
+4. Burn the bootloader with the following command  
+` avrdude -b 19200 -c avrisp -p atmega32 -v -e -U hfuse:w:0xD0:m -U lfuse:w:0x0F:m -U flash:w:main.hex:i -P comPORT`  
+Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Windows or `/dev/ttyACM0` in Linux). Use Device Manager in Windows to find the port being used. Use `ls /dev/tty*` in Linux.
+5. If this process is successful, you should now be able to upload normally.

keyboards/preonic/keymaps/boy314/keymap.c

@@ -21,7 +21,7 @@
 // define layers
 #define _QWERTY 0
 #define _DVORAK 1
-#define _OSU 2
+#define _ARROWS 2
 #define _LOWER 10
 #define _RAISE 11
 #define _ADJUST 12
@@ -29,12 +29,9 @@
 // macro shortcuts
 #define QWERTY TO(_QWERTY)
 #define DVORAK TO(_DVORAK)
-#define OSU TO(_OSU)
 #define LOWER M(_LOWER)
 #define RAISE M(_RAISE)
-
+#define ARROWS TO(_ARROWS)
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
  
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
@@ -48,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  | Shift|
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Ctrl |  Del | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * | Ctrl |  Del | Alt  | GUI  |Lower | Raise|    Space    | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
 
@@ -57,7 +54,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_ENT,  \
   KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
   KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC, \
-  KC_LCTL, KC_DEL,  KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT \
+  KC_LCTL, KC_DEL,  KC_LGUI, KC_LALT, LOWER,   RAISE,   KC_SPC,  KC_SPC,  KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT \
 ),
 
 /* Dvorak
@@ -70,7 +67,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  | Shift|
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Ctrl | Del  | Alt  | GUI  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * | Ctrl | Del  | Alt  | GUI  |Lower | Raise|    Space    | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
 
@@ -79,7 +76,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH, \
   KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_ENT,  \
   KC_LSPO, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSPC, \
-  KC_LCTL, KC_DEL,  KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT \
+  KC_LCTL, KC_DEL,  KC_LGUI, KC_LALT, LOWER,   RAISE, KC_SPC,  KC_SPC,   KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT \
+),
+
+/* ARROWS
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |  Up  |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+ 
+[_ARROWS] = LAYOUT_preonic_grid( \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_UP,   _______, _______, _______,  \
+  _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT,_______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
 ),
 
 /* Lower
@@ -117,13 +136,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_RAISE] = {
-  {KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC},
-  {KC_GRV,  _______, _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______,    KC_DEL},
-  {KC_DEL,  _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS},
-  {_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, KC_PGUP, _______},
-  {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
-},
 
 [_RAISE] = LAYOUT_preonic_grid( \
   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
@@ -143,7 +155,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * |      |Voice-|Voice+|Mus on|MusOff|MidiOn|MidOff|Dvorak|      |      |      |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * |      |  OSU |      |      |      |             |      |      |      |      |      |
+ * |      |ARROWS|      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
 
@@ -152,7 +164,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______, RESET,   DEBUG,   _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL,  \
   _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  _______, _______, _______, _______, \
   _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  DVORAK,  _______, _______, _______, _______, \
-  _______, OSU, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
+  _______, ARROWS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  \
 )
 
 };
@@ -175,10 +187,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record)
 			}
 			return false;
 			break;
-		case OSU:
+		case ARROWS:
 			if (record->event.pressed)
 			{
-				set_single_persistent_default_layer(_OSU);
+				set_single_persistent_default_layer(_ARROWS);
 			}
 			return false;
 			break;

keyboards/redox_w/info.json

@@ -6,7 +6,91 @@
   "height": 6.25,
   "layouts": {
     "LAYOUT": {
-      "layout": [{"label":"[L2] `", "x":0, "y":0.375, "w":1.25}, {"label":"!", "x":1.25, "y":0.375}, {"label":"@", "x":2.25, "y":0.125}, {"label":"#", "x":3.25, "y":0}, {"label":"$", "x":4.25, "y":0.125}, {"label":"%", "x":5.25, "y":0.25}, {"label":"[L1]", "x":6.25, "y":0.75}, {"label":"[L1]", "x":11.25, "y":0.75}, {"label":"^", "x":12.25, "y":0.25}, {"label":"&", "x":13.25, "y":0.125}, {"label":"*", "x":14.25, "y":0}, {"label":"(", "x":15.25, "y":0.125}, {"label":")", "x":16.25, "y":0.375}, {"label":"[L2] -", "x":17.25, "y":0.375, "w":1.25}, {"label":"Tab", "x":0, "y":1.375, "w":1.25}, {"label":"Q", "x":1.25, "y":1.375}, {"label":"W", "x":2.25, "y":1.125}, {"label":"E", "x":3.25, "y":1}, {"label":"R", "x":4.25, "y":1.125}, {"label":"T", "x":5.25, "y":1.25}, {"label":"[", "x":6.25, "y":1.75, "h":1.5}, {"label":"]", "x":11.25, "y":1.75, "h":1.5}, {"label":"Y", "x":12.25, "y":1.25}, {"label":"U", "x":13.25, "y":1.125}, {"label":"I", "x":14.25, "y":1}, {"label":"O", "x":15.25, "y":1.125}, {"label":"P", "x":16.25, "y":1.375}, {"label":"=", "x":17.25, "y":1.375, "w":1.25}, {"label":"Esc", "x":0, "y":2.375, "w":1.25}, {"label":"A", "x":1.25, "y":2.375}, {"label":"S", "x":2.25, "y":2.125}, {"label":"D", "x":3.25, "y":2}, {"label":"F", "x":4.25, "y":2.125}, {"label":"G", "x":5.25, "y":2.25}, {"label":"PgUp", "x":6.75, "y":3.75}, {"label":"End", "x":10.75, "y":3.75}, {"label":"H", "x":12.25, "y":2.25}, {"label":"J", "x":13.25, "y":2.125}, {"label":"K", "x":14.25, "y":2}, {"label":"L", "x":15.25, "y":2.125}, {"label":":", "x":16.25, "y":2.375}, {"label":"'", "x":17.25, "y":2.375, "w":1.25}, {"label":"Shift", "x":0, "y":3.375, "w":1.25}, {"label":"Z", "x":1.25, "y":3.375}, {"label":"X", "x":2.25, "y":3.125}, {"label":"C", "x":3.25, "y":3}, {"label":"V", "x":4.25, "y":3.125}, {"label":"B", "x":5.25, "y":3.25}, {"label":"PgDn", "x":7.75, "y":3.75}, {"label":"Home", "x":9.75, "y":3.75}, {"label":"N", "x":12.25, "y":3.25}, {"label":"M", "x":13.25, "y":3.125}, {"label":"<", "x":14.25, "y":3}, {"label":">", "x":15.25, "y":3.125}, {"label":"?", "x":16.25, "y":3.375}, {"label":"Shift", "x":17.25, "y":3.375, "w":1.25}, {"label":"GUI", "x":0.25, "y":4.375}, {"label":"+", "x":1.25, "y":4.375}, {"label":"-", "x":2.25, "y":4.125}, {"label":"[Alt] *", "x":3.25, "y":4}, {"label":"[Ctrl] /", "x":5.5, "y":5.25, "w":1.25}, {"label":"Backspace", "x":6.75, "y":4.75, "h":1.5}, {"label":"Del", "x":7.75, "y":4.75, "h":1.5}, {"label":"Enter", "x":9.75, "y":4.75, "h":1.5}, {"label":"Space", "x":10.75, "y":4.75, "h":1.5}, {"label":"Alt", "x":11.75, "y":5.25, "w":1.25}, {"label":"Left", "x":14.25, "y":4}, {"label":"Down", "x":15.25, "y":4.125}, {"label":"Up", "x":16.25, "y":4.375}, {"label":"Right", "x":17.25, "y":4.375}]
+      "layout": [
+        {"label":"_Nav || `", "x":0, "y":0.375, "w":1.25},
+        {"label":"1", "x":1.25, "y":0.375},
+        {"label":"2", "x":2.25, "y":0.125},
+        {"label":"3", "x":3.25, "y":0},
+        {"label":"4", "x":4.25, "y":0.125},
+        {"label":"5", "x":5.25, "y":0.25},
+
+        {"label":"6", "x":12.25, "y":0.25},
+        {"label":"7", "x":13.25, "y":0.125},
+        {"label":"8", "x":14.25, "y":0},
+        {"label":"9", "x":15.25, "y":0.125},
+        {"label":"0", "x":16.25, "y":0.375},
+        {"label":"_Nav || -", "x":17.25, "y":0.375, "w":1.25},
+
+        {"label":"Tab", "x":0, "y":1.375, "w":1.25},
+        {"label":"Q", "x":1.25, "y":1.375},
+        {"label":"W", "x":2.25, "y":1.125},
+        {"label":"E", "x":3.25, "y":1},
+        {"label":"R", "x":4.25, "y":1.125},
+        {"label":"T", "x":5.25, "y":1.25},
+        {"label":"MO(_SYMB)", "x":6.25, "y":0.75},
+
+        {"label":"MO(_SYMB)", "x":11.25, "y":0.75},
+        {"label":"Y", "x":12.25, "y":1.25},
+        {"label":"U", "x":13.25, "y":1.125},
+        {"label":"I", "x":14.25, "y":1},
+        {"label":"O", "x":15.25, "y":1.125},
+        {"label":"P", "x":16.25, "y":1.375},
+        {"label":"=", "x":17.25, "y":1.375, "w":1.25},
+
+        {"label":"Esc", "x":0, "y":2.375, "w":1.25},
+        {"label":"A", "x":1.25, "y":2.375},
+        {"label":"S", "x":2.25, "y":2.125},
+        {"label":"D", "x":3.25, "y":2},
+        {"label":"F", "x":4.25, "y":2.125},
+        {"label":"G", "x":5.25, "y":2.25},
+        {"label":"[", "x":6.25, "y":1.75, "h":1.5},
+
+        {"label":"]", "x":11.25, "y":1.75, "h":1.5},
+        {"label":"H", "x":12.25, "y":2.25},
+        {"label":"J", "x":13.25, "y":2.125},
+        {"label":"K", "x":14.25, "y":2},
+        {"label":"L", "x":15.25, "y":2.125},
+        {"label":";", "x":16.25, "y":2.375},
+        {"label":"'", "x":17.25, "y":2.375, "w":1.25},
+
+        {"label":"Shift", "x":0, "y":3.375, "w":1.25},
+        {"label":"Z", "x":1.25, "y":3.375},
+        {"label":"X", "x":2.25, "y":3.125},
+        {"label":"C", "x":3.25, "y":3},
+        {"label":"V", "x":4.25, "y":3.125},
+        {"label":"B", "x":5.25, "y":3.25},
+
+        {"label":"_Adjust/Page Up", "x":6.75, "y":3.75},
+        {"label":"Page Down", "x":7.75, "y":3.75},
+
+        {"label":"Home", "x":9.75, "y":3.75},
+        {"label":"_Adjust/End", "x":10.75, "y":3.75},
+
+        {"label":"N", "x":12.25, "y":3.25},
+        {"label":"M", "x":13.25, "y":3.125},
+        {"label":",", "x":14.25, "y":3},
+        {"label":",", "x":15.25, "y":3.125},
+        {"label":"\\", "x":16.25, "y":3.375},
+        {"label":"Shift", "x":17.25, "y":3.375, "w":1.25},
+
+        {"label":"LGUI", "x":0.25, "y":4.375},
+        {"label":"P+", "x":1.25, "y":4.375},
+        {"label":"P-", "x":2.25, "y":4.125},
+        {"label":"LAlt || P*", "x":3.25, "y":4},
+
+        {"label":"LCtrl || P/", "x":5.5, "y":5.25, "w":1.25},
+        {"label":"Backspace", "x":6.75, "y":4.75, "h":1.5},
+        {"label":"Delete", "x":7.75, "y":4.75, "h":1.5},
+
+        {"label":"Enter", "x":9.75, "y":4.75, "h":1.5},
+        {"label":"Space", "x":10.75, "y":4.75, "h":1.5},
+        {"label":"RAlt", "x":11.75, "y":5.25, "w":1.25},
+
+        {"label":"Left", "x":14.25, "y":4},
+        {"label":"Down", "x":15.25, "y":4.125},
+        {"label":"Up", "x":16.25, "y":4.375},
+        {"label":"Right", "x":17.25, "y":4.375}
+      ]
     }
   }
 }

keyboards/redox_w/readme.md

@@ -22,7 +22,7 @@ make redox_w:default
 Example of flashing this keyboard:
 
 ```sh
-make redox_w/rev1:default:avrdude
+make redox_w:default:avrdude
 ```
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/s65_x/config.h

@@ -4,7 +4,7 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define PRODUCT         S65-X-RGB
+#define PRODUCT         S65-X RGB
 #define DESCRIPTION     QMK keyboard firmware for S65-X RGB
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
@@ -22,7 +22,8 @@
 
 /* number of backlight levels */
 #define BACKLIGHT_PIN B7
-#define BACKLIGHT_LEVELS 3
+#define BACKLIGHT_LEVELS 5
+#define BACKLIGHT_CAPS_LOCK
 
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS
@@ -31,6 +32,7 @@
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 20
+#define RGBLIGHT_SLEEP
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW

keyboards/s65_x/s65_x.c

@@ -1,5 +1,4 @@
 #include "s65_x.h"
-#include "led.h"
 
 void matrix_init_kb(void) {
   // put your keyboard start-up code here
@@ -14,11 +13,6 @@ void matrix_scan_kb(void) {
 };
 
 void led_set_kb(uint8_t usb_led) {
-  if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-    // Turn capslock on
+  led_set_user(usb_led);
-    PORTB &= ~(1<<7);
-  } else {
-    // Turn capslock off
-    PORTB |= (1<<7);
-  }
 }

keyboards/sirius/unigo66/readme.md

@@ -1,17 +0,0 @@
-# UniGo66
-
-![UniGo66](https://i.imgur.com/ZKlcncg.png)
-
-The UniGo66 is an ergonomic wireless keyboard designed by Sirius and manufactured by ALF Studios. 
-
-Join ALF Studios on [Discord](https://discord.gg/GJ8bdM)
-
-Make example:
-
-	make sirius/unigo66:default
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-To get the U2U into DFU flashing mode, insert the U2U into the computer and press the button in the red circle shown below
-
-![U2U](https://i.imgur.com/WKwgDjZ.png)

keyboards/westfoxtrot/aanzee/aanzee.c

@@ -0,0 +1,52 @@
+/* Copyright 2019 westfoxtrot
+
+*
+
+* This program is free software: you can redistribute it and/or modify
+
+* it under the terms of the GNU General Public License as published by
+
+* the Free Software Foundation, either version 2 of the License, or
+
+* (at your option) any later version.
+
+*
+
+* This program is distributed in the hope that it will be useful,
+
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+
+* GNU General Public License for more details.
+
+*
+
+* You should have received a copy of the GNU General Public License
+
+* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+*/
+
+#include "aanzee.h"
+
+
+void led_set_kb(uint8_t usb_led) {
+
+if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+
+// Turn capslock on
+
+  writePinLow(B2);
+
+} else {
+
+// Turn capslock off
+
+  writePinHigh(B2);
+
+}
+
+led_set_user(usb_led);
+
+}

keyboards/westfoxtrot/aanzee/aanzee.h

@@ -0,0 +1,65 @@
+/* Copyright 2019 westfoxtrot
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef AANZEE_H
+#define AANZEE_H
+
+#define ___ KC_NO
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+*
+* The first section contains all of the arguments representing the physical
+* layout of the board and position of the keys.
+*
+* The second converts the arguments into a two-dimensional array which
+* represents the switch matrix.
+*/
+// readability
+
+#define LAYOUT_ansi( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0F, K0D, K0E, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,      K1D, K1E, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A,      K2C,      K2D, K2E, \
+  K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,      K3D, K3E, \
+  K40, K41, K42,                K46,           K49, K4A, K4B, K4C,      K4D, K4E  \
+) \
+{ \
+  {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F}, \
+  {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, ___}, \
+  {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, ___, K2C, K2D, K2E, ___}, \
+  {K30, ___, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, ___}, \
+  {K40, K41, K42, ___, ___, ___, K46, ___, ___, K49, K4A, K4B, K4C, K4D, K4E, ___}  \
+}
+#define LAYOUT_iso( \
+  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+  K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B,      K1D, K1E, \
+  K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \
+  K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+  K40, K41, K42,                K46,           K49, K4A, K4B, K4C, K4D, K4E  \
+) \
+{ \
+  {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, ___}, \
+  {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, ___, K1D, K1E, ___}, \
+  {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, ___}, \
+  {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, ___}, \
+  {K40, K41, K42, ___, ___, ___, K46, ___, ___, K49, K4A, K4B, K4C, K4D, K4E, ___}  \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif

keyboards/westfoxtrot/aanzee/config.h

@@ -0,0 +1,142 @@
+/*
+Copyright 2019 westfoxtrot
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x21FF
+#define PRODUCT_ID      0xAA01
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    westfoxtrot
+#define PRODUCT         aanzee
+#define DESCRIPTION     QMK Firmware for the Aanzee PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS {B4,D7,D6,D4,B3}
+#define MATRIX_COL_PINS {D2,D1,D0,D3,D5,C7,C6,B6,B5,F0,F1,F4,F5,F6,F7,B0}
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+#define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
+   #define RGBLED_NUM 9
+   #define RGBLIGHT_HUE_STEP 12
+   #define RGBLIGHT_SAT_STEP 25
+   #define RGBLIGHT_VAL_STEP 12
+   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+   #define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//  #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+#define RGBW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+
+//dynamic keymap and via support
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+
+// EEPROM usage
+
+// TODO: refactor with new user EEPROM code (coming soon)
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
+
+// Dynamic keymap starts after EEPROM version
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
+// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 675    // **** CHANGE THIS BASED ON MATRIX_ROWS & MATRIX_COLS ****
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 349    // **** CHANGE THIS BASED ON 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR ****
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/westfoxtrot/aanzee/info.json

@@ -0,0 +1,18 @@
+{
+  "keyboard_name": "aanzee",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 16,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_ansi": {
+      "key_count": 68,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, {"label":"\u21e7 Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"Fn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+    },
+    "LAYOUT_iso": {
+      "key_count": 68,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Home", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"label":"PgUp", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"PgDn", "x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"Fn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
+    },
+  }
+}
+}

keyboards/westfoxtrot/aanzee/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 westfoxtrot
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// place overrides here

keyboards/westfoxtrot/aanzee/keymaps/default/keymap.c

@@ -0,0 +1,48 @@
+/* Copyright 2019 westfoxtrot
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+#define _MA 0
+#define _F1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_MA] = LAYOUT_ansi(
+    KC_GESC,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_DEL, KC_HOME,\
+    KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,KC_BSLS,         KC_END, \
+    KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,         KC_ENT,         KC_PGUP,  \
+    KC_LSFT,          KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,KC_RSFT,  KC_UP,         KC_PGDN, \
+    KC_LCTRL,KC_LGUI,KC_LALT,                 KC_SPC,                        KC_RALT,MO(_F1),KC_RCTL,KC_LEFT,KC_DOWN,       KC_RGHT),
+
+  [_F1] = LAYOUT_ansi(
+    RESET,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,  KC_F12,_______,_______,_______, \
+    _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______,_______,_______,        _______, \
+    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        _______,  \
+    _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______, \
+    _______,_______,_______,                _______,                        _______,_______,_______,_______,_______,        _______)
+  };
+
+    void matrix_init_user(void) {
+      //user initialization
+    }
+
+    void matrix_scan_user(void) {
+      //user matrix
+    }
+
+    bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+      return true;
+    }

keyboards/westfoxtrot/aanzee/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for aanzee

keyboards/westfoxtrot/aanzee/keymaps/iso-default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019 westfoxtrot
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// place overrides here

keyboards/westfoxtrot/aanzee/keymaps/iso-default/keymap.c

@@ -0,0 +1,48 @@
+/* Copyright 2019 westfoxtrot
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+#define _MA 0
+#define _F1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_MA] = LAYOUT_iso(
+    KC_GESC,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_HOME,\
+    KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,         KC_END, \
+    KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,KC_NUHS, KC_ENT, KC_PGUP,  \
+    KC_LSFT,  KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,KC_RSFT,  KC_UP, KC_PGDN, \
+    KC_LCTRL,KC_LGUI,KC_LALT,               KC_SPC,                        KC_RALT,MO(_F1),KC_RCTL,KC_LEFT,KC_DOWN, KC_RGHT),
+
+  [_F1] = LAYOUT_iso(
+    RESET,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,  KC_F12,_______,_______, \
+    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______, \
+    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  \
+    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
+    _______,_______,_______,                _______,                        _______,_______,_______,_______,_______,_______)
+  };
+
+    void matrix_init_user(void) {
+      //user initialization
+    }
+
+    void matrix_scan_user(void) {
+      //user matrix
+    }
+
+    bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+      return true;
+    }

keyboards/westfoxtrot/aanzee/keymaps/iso-default/readme.md

@@ -0,0 +1 @@
+# The default keymap for aanzee

keyboards/westfoxtrot/aanzee/keymaps/via/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018 westfoxtrot
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// place overrides here

keyboards/westfoxtrot/aanzee/keymaps/via/keymap.c

@@ -0,0 +1,48 @@
+/* Copyright 2019 westfoxtrot
+*
+* This program is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 2 of the License, or
+* (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+#define _MA 0
+#define _F1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_MA] = LAYOUT_ansi(
+    KC_GESC,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_DEL, KC_HOME,\
+    KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,KC_LBRC,KC_RBRC,KC_BSLS,         KC_END, \
+    KC_CAPS,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,KC_SCLN,KC_QUOT,         KC_ENT,         KC_PGUP,  \
+    KC_LSFT,          KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,KC_COMM, KC_DOT,KC_SLSH,KC_RSFT,  KC_UP,         KC_PGDN, \
+    KC_LCTRL,KC_LGUI,KC_LALT,                 KC_SPC,                        KC_RALT,MO(_F1),KC_RCTL,KC_LEFT,KC_DOWN,       KC_RGHT),
+
+  [_F1] = LAYOUT_ansi(
+    RESET,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11,  KC_F12,_______,_______,_______, \
+    _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______,_______,_______,        _______, \
+    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______,        _______,  \
+    _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,        _______, \
+    _______,_______,_______,                _______,                        _______,_______,_______,_______,_______,        _______)
+  };
+
+    void matrix_init_user(void) {
+      //user initialization
+    }
+
+    void matrix_scan_user(void) {
+      //user matrix
+    }
+
+    bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+      return true;
+    }

keyboards/westfoxtrot/aanzee/keymaps/via/readme.md

@@ -0,0 +1 @@
+# The default keymap for aanzee with via support

keyboards/westfoxtrot/aanzee/keymaps/via/rules.mk

@@ -0,0 +1,70 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+
+#add files needed for via
+
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+SRC += keyboards/wilba_tech/wt_main.c

keyboards/westfoxtrot/aanzee/readme.md

@@ -0,0 +1,15 @@
+# aanzee
+
+![aanzee](https://cablecardesigns.co/portfolio-posts/aanzee)
+
+custom pcb for the aanzee keyboard
+
+ Keyboard Maintainer: [westfoxtrot](https://github.com/westfoxtrot)  
+ Hardware Supported: aanzee PCB  
+ Hardware Availability: with group buy 
+
+Make example for this keyboard (after setting up your build environment):
+
+    make westfoxtrot/aanzee:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/westfoxtrot/aanzee/rules.mk

@@ -0,0 +1,65 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+

keyboards/xd75/keymaps/boy_314/keymap.c

@@ -17,11 +17,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * .--------------------------------------------------------------------------------------------------------------------------------------.
  * | ESC    | 1      | 2      | 3      | 4      | 5      | -      | `      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
- * | TAB    | '      | .      | .      | P      | Y      | [      | \      | ]      | F      | G      | C      | R      | L      | /      |
+ * | TAB    | '      | .      | .      | P      | Y      | [      | UP      | ]      | F      | G      | C      | R      | L      | /      |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
- * | CAP LK | A      | O      | E      | U      | I      | HOME   | DEL    | PG UP  | D      | H      | T      | N      | S      | ENTER  |
+ * | CAP LK | A      | O      | E      | U      | I      | LEFT   | DOWN   | RIGHT  | D      | H      | T      | N      | S      | ENTER  |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
- * | LSHIFT | ;      | Q      | J      | K      | X      | END    | UP     | PG DN  | M      | W      | W      | V      | Z      | RSHIFT |
+ * | LSHIFT | ;      | Q      | J      | K      | X      | PG DN  | UP     | PG UP  | M      | W      | W      | V      | Z      | RSHIFT |
  * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+--------+-----------------+--------+--------|
  * | LCTRL  | DEL    | LALT   | WIN    | FN1    | SPACE  | LEFT   | DOWN   | RIGHT  | SPACE  | FN2    | LEFT   | DOWN   | UP     | RIGHT  |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
@@ -29,9 +29,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
  [_DV] = { /* DVORAK */
   { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS, KC_GRV,  KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC  },
-  { KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_LBRC, KC_BSLS, KC_RBRC, KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH  },
+  { KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_LBRC, KC_UP,   KC_RBRC, KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH  },
-  { KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_HOME, KC_DEL,  KC_PGUP, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_ENT   },
+  { KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_LEFT, KC_DOWN, KC_RGHT, KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_ENT   },
-  { KC_LSPO, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_END,  KC_UP,   KC_PGDN, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSPC  },
+  { KC_LSPO, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_PGDN,  KC_UP,  KC_PGUP, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSPC  },
   { KC_LCTL, KC_DEL,  KC_LALT, KC_LGUI, MO(_FN1),KC_SPC,  KC_LEFT, KC_DOWN, KC_RGHT, KC_SPC,  MO(_FN2),KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT },
  },
 
@@ -67,7 +67,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
  * |        |        |        |        |        |        | 1      | 2      | 3      |        |        |        |        |        |        |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        |        |        |        |        |        | +      | 0      | .      |        |        |        |        |        |        |
+ * |        |        |        |        |        |        | 0      | +      | .      |        |        |        |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
  */  
 
@@ -76,7 +76,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   { _______, _______, _______, _______, _______, _______,    KC_7,    KC_8,    KC_9, _______, _______, _______, _______, _______, _______  },
   { _______, _______, _______, _______, _______, _______,    KC_4,    KC_5,    KC_6, _______, _______, _______, _______, _______, _______  },
   { _______, _______, _______, _______, _______, _______,    KC_1,    KC_2,    KC_3, _______, _______, _______, _______, _______, _______  },
-  { _______, _______, _______, _______, _______, _______, KC_PLUS,    KC_0,  KC_DOT, _______, _______, _______, _______, _______, _______  },
+  { _______, _______, _______, _______, _______, _______,    KC_0, KC_PLUS,  KC_DOT, _______, _______, _______, _______, _______, _______  },
  },
 
 /* FUNCTION1
@@ -125,6 +125,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  }
 };
 
+
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
   // MACRODOWN only works in this function

layouts/community/ortho_4x12/buswerks/config.h

@@ -13,10 +13,15 @@
 
 #ifdef AUDIO_ENABLE 
     #define STARTUP_SONG SONG(PLANCK_SOUND) 
-     // #define STARTUP_SONG SONG(NO_SOUND) 
+    // #define STARTUP_SONG SONG(NO_SOUND) 
-  
     #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
                                 	SONG(COLEMAK_SOUND), \
                                     SONG(DVORAK_SOUND) \
                                 } 
 #endif 
+
+// MIDI notes can be sent when in Music mode
+#define MIDI_BASIC
+
+// Most tactile encoders have detents every 4 stages
+#define ENCODER_RESOLUTION 4

layouts/community/ortho_4x12/buswerks/keymap.c

@@ -2,183 +2,174 @@
 
 extern keymap_config_t keymap_config;
 
-#define _QWERTY 0
+enum layers {
-#define _COLEMAK 1
+    _QWERTY,
-#define _DVORAK 2
+    _COLEMAK,
-#define _LOWER 3
+    _DVORAK,
-#define _RAISE 4
+    _LOWER,
-#define _MOUSE 5
+    _RAISE,
-#define _ADJUST 16
+    _GAME,
-
+    _ADJUST
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  COLEMAK,
-  DVORAK,
-  LOWER,
-  RAISE,
-  MOUSE,
-  ADJUST,
 };
 
-// Fillers to make layering more clear
+enum custom_keycodes {
-#define _______ KC_TRNS
+    QWERTY = SAFE_RANGE,
-#define KC_     KC_TRNS
+    COLEMAK,
-#define XXXXXXX KC_NO
+    DVORAK,
+    LOWER,
+    RAISE,
+    GAME,
+    ADJUST
+};
 
-#define ESC_CMD MT(MOD_LGUI, KC_ESC)
+#define GAME TG(_GAME)
 #define RSE_ENT LT(_RAISE, KC_ENT)
-#define KC_LOWR LOWER
+#define ESC_CTL LCTL_T(KC_ESC) // for Linux
-#define KC_RASE RAISE
+#define ESC_CMD LGUI_T(KC_ESC) // for macOS
-#define KC_ADJ  ADJUST
-#define MOUSE   TG(_MOUSE)
 
-#define DESK_L  LCTL(KC_LEFT)
+// Use these to switch desktops on macOS
-#define DESK_R  LCTL(KC_RGHT)
+#define DESK_L LCTL(KC_LEFT)
-#define MSN_CTL LCTL(KC_UP)
+#define DESK_R LCTL(KC_RGHT)
-#define APP_WND LCTL(KC_DOWN)
-#define SWITCHR LGUI(KC_TAB)
 
-#define WORD_L  LALT(KC_LEFT)
+// Use these to switch desktops on Gnome
-#define WORD_R  LALT(KC_RGHT)
+#define DESK_UP LGUI(KC_PGUP)
-#define LINE_L  LGUI(KC_LEFT)
+#define DESK_DN LGUI(KC_PGDN)
-#define LINE_R  LGUI(KC_RGHT)
-
-#define COPY    LGUI(KC_C)
-#define CUT     LGUI(KC_X)
-#define PASTE   LGUI(KC_V)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-[_QWERTY] = LAYOUT_ortho_4x12(
+    // Use QWERTY on macOS (Colemak mapped using software)
-  // .--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.
+    [_QWERTY] = LAYOUT_ortho_4x12(
-       KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I,    KC_O   , KC_P   , KC_BSPC, \
+            KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I,    KC_O   , KC_P   , KC_BSPC, \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+            ESC_CMD, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K,    KC_L   , KC_SCLN, KC_QUOT, \
-       ESC_CMD, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K,    KC_L   , KC_SCLN, KC_QUOT, \
+            KC_LSPO, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSPC, \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+            XXXXXXX, KC_LCTL, KC_LGUI, KC_LALT, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
-       KC_LSPO, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSPC, \
+            ),
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       KC_LCTL, KC_HYPR, MOUSE  , KC_LALT, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
-  // '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
-),
 
-[_COLEMAK] = LAYOUT_ortho_4x12( \
+    // Use Colemak on Linux (No native Colemak mapping)
-  // .--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.
+    [_COLEMAK] = LAYOUT_ortho_4x12( \
-       KC_TAB , KC_Q   , KC_W   , KC_F   , KC_P   , KC_G   , KC_J   , KC_L   , KC_U   , KC_Y   , KC_SCLN, KC_BSPC, \
+            KC_TAB , KC_Q   , KC_W   , KC_F   , KC_P   , KC_G   , KC_J   , KC_L   , KC_U   , KC_Y   , KC_SCLN, KC_BSPC, \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+            ESC_CTL, KC_A   , KC_R   , KC_S   , KC_T   , KC_D   , KC_H   , KC_N   , KC_E   , KC_I   , KC_O   , KC_QUOT, \
-       ESC_CMD, KC_A   , KC_R   , KC_S   , KC_T   , KC_D   , KC_H   , KC_N   , KC_E   , KC_I   , KC_O   , KC_QUOT, \
+            KC_LSPO, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_K   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSPC, \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+            XXXXXXX, KC_LCTL, KC_LGUI, KC_LALT, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
-       KC_LSPO, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_K   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSPC, \
+            ),
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       KC_LCTL, KC_HYPR, MOUSE  , KC_LALT, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
-  // '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
-),
 
-[_DVORAK] = LAYOUT_ortho_4x12( \
+    [_DVORAK] = LAYOUT_ortho_4x12( \
-  // .--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.
+            KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
-       KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
+            ESC_CTL, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+            KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
-       ESC_CMD, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+            XXXXXXX, KC_LCTL, KC_LGUI, KC_LALT, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+            ),
-       KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       KC_LCTL, KC_HYPR, MOUSE  , KC_LALT, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
-  // '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
-),
 
-[_LOWER] = LAYOUT_ortho_4x12( \
+    [_LOWER] = LAYOUT_ortho_4x12( \
-  // .--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.
+            KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_7,    KC_8,    KC_9,    KC_MINS, _______, \
-       SWITCHR, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_7,    KC_8,    KC_9,    KC_MINS, _______, \
+            KC_TILD, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_4,    KC_5,    KC_6,    KC_PLUS, KC_PIPE, \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+            _______, _______, _______, KC_UNDS, KC_EQL,  _______, _______, KC_1,    KC_2,    KC_3,    _______, _______, \
-       KC_TILD, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_4,    KC_5,    KC_6,    KC_PLUS, KC_PIPE, \
+            _______, _______, _______, _______, _______, _______, _______, KC_0,    KC_DOT,  KC_COMM, _______, _______ \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+            ),
-       _______, _______, _______, KC_UNDS, KC_EQL,  _______, _______, KC_1,    KC_2,    KC_3,    _______, _______, \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       _______, _______, _______, _______, _______, _______, _______, KC_0,    KC_DOT,  KC_COMM, _______, _______ \
-  // '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
-),
 
-[_RAISE] = LAYOUT_ortho_4x12( \
+    [_RAISE] = LAYOUT_ortho_4x12( \
-  // .--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.
+            KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, _______, KC_INS,  KC_DEL, \
-       KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_UNDS, KC_EQL,  KC_DEL, \
+            KC_TILD, _______, KC_LBRC, KC_LCBR, KC_RCBR, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, KC_BSLS, \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+            _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  _______, _______, \
-       _______, _______, KC_LBRC, KC_LCBR, KC_RCBR, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, KC_BSLS, \
+            _______, _______, _______, _______, _______, _______, _______, _______, DESK_R,  DESK_DN, DESK_UP, DESK_L \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+            ),
-       _______, _______, _______, _______, _______, _______, LINE_L,  WORD_L,  WORD_R,  LINE_R,  _______, _______, \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT \
-  // '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
-),
 
-[_MOUSE] = LAYOUT_ortho_4x12( \
+    [_GAME] = LAYOUT_ortho_4x12( \
-  // .--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.
+            KC_TAB , KC_Q   , KC_W   , KC_F   , KC_P   , KC_G   , KC_J   , KC_L   , KC_U   , KC_Y   , KC_SCLN, KC_BSPC, \
-       SWITCHR, _______, _______, KC_MS_U, _______, _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, \
+            ESC_CMD, KC_A   , KC_R   , KC_S   , KC_T   , KC_D   , KC_H   , KC_N   , KC_E   , KC_I   , KC_O   , KC_QUOT, \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+            KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_K   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_ENT, \
-       _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN1, KC_BTN2, KC_BTN3, _______, _______, \
+            xxxxxxx, KC_LCTL, KC_LGUI, KC_LALT, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+            ),
-       _______, _______, _______, KC_WH_U, KC_WH_D, COPY,    PASTE,   KC_BTN4, KC_BTN5, _______, _______, _______, \
-  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       _______, _______, MOUSE  , _______, _______, KC_SPC,  KC_SPC,  KC_ENT,  KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
-  // '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
-),
-
-[_ADJUST] =  LAYOUT_ortho_4x12( \
-  _______, QWERTY,  COLEMAK, DVORAK,  RESET,   _______, _______, _______, _______, AG_NORM, AG_SWAP, _______, \
-  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   _______, _______, AU_OFF , AU_ON  , _______, \
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, _______, _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
-)
 
+    [_ADJUST] = LAYOUT_planck_grid(
+            _______, RESET,   DEBUG,   _______, _______, _______, _______, _______, _______,  _______, _______, KC_DEL ,
+            _______, _______, MU_MOD,  AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK,  DVORAK,  GAME,    _______,
+            _______, MUV_DE,  MUV_IN,  MU_ON,   MU_OFF,  MI_ON,   MI_OFF,  _______, _______,  _______, _______, _______,
+            _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______
+            )
 
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
+    switch (keycode) {
-    case QWERTY:
+        case QWERTY:
-      if (record->event.pressed) {
+            if (record->event.pressed) {
-        set_single_persistent_default_layer(_QWERTY);
+                set_single_persistent_default_layer(_QWERTY);
-      }
+            }
-      return false;
+            return false;
-      break;
+            break;
-    case COLEMAK:
+        case COLEMAK:
-      if (record->event.pressed) {
+            if (record->event.pressed) {
-        set_single_persistent_default_layer(_COLEMAK);
+                set_single_persistent_default_layer(_COLEMAK);
-      }
+            }
-      return false;
+            return false;
-      break;
+            break;
-    case DVORAK:
+        case DVORAK:
-      if (record->event.pressed) {
+            if (record->event.pressed) {
-        set_single_persistent_default_layer(_DVORAK);
+                set_single_persistent_default_layer(_DVORAK);
-      }
+            }
-      return false;
+            return false;
-      break;
+            break;
-    case LOWER:
+        case LOWER:
-      if (record->event.pressed) {
+            if (record->event.pressed) {
-        layer_on(_LOWER);
+                layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+                update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
+            } else {
-        layer_off(_LOWER);
+                layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+                update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
+            }
-      return false;
+            return false;
-      break;
+            break;
-    case RAISE:
+        case RAISE:
-      if (record->event.pressed) {
+            if (record->event.pressed) {
-        layer_on(_RAISE);
+                layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+                update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
+            } else {
-        layer_off(_RAISE);
+                layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+                update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
+            }
-      return false;
+            return false;
-      break;
+            break;
-    case ADJUST:
+        case ADJUST:
-      if (record->event.pressed) {
+            if (record->event.pressed) {
-        layer_on(_ADJUST);
+                layer_on(_ADJUST);
-      } else {
+            } else {
-        layer_off(_ADJUST);
+                layer_off(_ADJUST);
-      }
+            }
-      return false;
+            return false;
-      break;
+            break;
-  }
+    }
-  return true;
+    return true;
 }
+
+void encoder_update(bool clockwise) {
+    if (IS_LAYER_ON(_RAISE) || IS_LAYER_ON(_LOWER)) {
+        if (clockwise) {
+            register_code(KC_VOLU);
+            unregister_code(KC_VOLU);
+        } else {
+            register_code(KC_VOLD);
+            register_code(KC_VOLD);
+        }
+    } else {
+        if (clockwise) {
+            #ifdef MOUSEKEY_ENABLE
+                register_code(KC_MS_WH_DOWN);
+                unregister_code(KC_MS_WH_DOWN);
+            #else
+                register_code(KC_PGDN);
+                unregister_code(KC_PGDN);
+            #endif
+        } else {
+            #ifdef MOUSEKEY_ENABLE
+                register_code(KC_MS_WH_UP);
+                unregister_code(KC_MS_WH_UP);
+            #else
+                register_code(KC_PGUP);
+                unregister_code(KC_PGUP);
+            #endif
+        }
+    }
+}
+
+

layouts/community/ortho_4x12/buswerks/readme.md

@@ -1,29 +1,12 @@
-Buswerks' 4x12 Ortholinear Layout
+![Imgur](https://i.imgur.com/yx9tFUq.png)
-============================
-For use on Planck, Let's Split, and similar keyboards
 
-### Layout Overview
+# Logan's Ortho 4x12 Layout
 
-- Main Layer
+This layout is what I use on my Planck. Some features of the layout:
-	- Enter is located on the Raise key (layer-tap)
-	- Space Cadet shift keys
-		- Lower + shift keys = Brackets[]
-		- Raise + shift keys = Braces{}
-	- The bottom left key is the Adjust modifier
-	- Escape is in the traditional Caps Lock position
-		- Holding down the escape key acts as LGUI (intended for macOS use)
-- Lower
-	- There is a numpad on the right hand (4, 5, and 6 are located under JKL/NEI/HTN)
-	- Plus and minus keys are located to the right of the numpad
-	- There are macOS desktop navigation keys and volume controls under the left hand
 
-- Raise
+- Rotary encoder support (no function for clicking yet)
-	- Vim-style arrow keys
+- Numpad under right hand (I find this much more comfortable than touch-typing the number row)
-		- Below the arrow keys are home, end, pgup, and pgdn
+- Space cadet shift
-	- Symbols are located on the right side of the keyboard, in a somewhat logical order
+- Curly braces are under the home row (makes programming much more comfortable)
-		- Symbols from the number row are in order, starting on the left pinky.
-		- Equals and underscore are in easily accessible spots, since they're commonly used in programming
-		- The ampersand is less common, so it's to the right of the equals symbol
 
-- Adjust
+Also, another note: the QWERTY layout uses `LGUI_T(KC_ESC)` and the COLEMAK/DVORAK layouts use `LCTL_T(KC_ESC)`. This is because I use the QWERTY layout on my Mac laptop so that I don't have to change the software remapping every time I dock my laptop. This also allows a convenient remapping of the modifier keys. I use the hardware mapped COLEMAK layout on Linux.
-	- Function keys are located along the top row (reset is moved to the Colemak 'R' position)

layouts/community/ortho_5x12/333fred/README.md

@@ -1,6 +1,6 @@
-# 333fred's Nyquist Layout
+# 333fred's 5x12 Layout
 
-This nyquist layout is based on my Ergodox Infinity Layout, which is [here](../../../../layouts/community/ergodox/333fred/README.md). It doesn't have all of my VS extensions, as I have my nyquist at home, not at work.
+This 5x12 layout is based on my Ergodox Infinity Layout, which is [here](../../ergodox/333fred/README.md). It doesn't have all of my VS extensions.
 
 ## Layers
 
@@ -18,7 +18,7 @@ Qwerty
 |------+------+------+------+------+------|------+------+------+------+------+------|
 | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |/ Ctrl| Shift|
 |------+------+------+------+------+------+------+------+------+------+------+------|
-| Ctrl |  Alt |  F4  | GUI  |LwrVIM| Bksp | Spc  | Ent  | Lock |   =  | RAlt | Del  |
+| Ctrl |  Alt |  F4  | GUI  | Bksp |LwrVIM| Spc  | Ent  | Lock |   =  | RAlt | Del  |
 `-----------------------------------------------------------------------------------'
 ```
 
@@ -66,7 +66,7 @@ Gaming mode (Raise)
 |------+------+------+------+------+------+------+------+------+------+------+------|
 |      |      |      |      |      |      |      |      |      |      |      |      |
 |------+------+------+------+------+------+------+------+------+------+------+------|
-| CTRL |      |      |      |   F  |      |      |      |      |      |      |      |
+| CTRL |      |      |      |      |      |      |      |      |      |      |      |
 |------+------+------+------+------+------+------+------+------+------+------+------|
 | Shift|   Z  |      |      |      |      |      |      |      |      |      |  GUI |
 |------+------+------+------+------+------+------+------+------+------+------+------|

layouts/community/ortho_5x12/333fred/config.h

@@ -1,6 +1,5 @@
 #pragma once
 
-#include "../../config.h"
 #include "333fred_config.h"
 
 #define USE_SERIAL

layouts/community/ortho_5x12/333fred/keymap.c

@@ -9,11 +9,6 @@ enum custom_macros {
     PSCREEN_APP
 };
 
-// Tap dance for layer transitions
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Qwerty
@@ -26,15 +21,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |/ Ctrl| Shift|
  * |------+------+------+------+------+------+------+------+------+------+------+------|
- * | Ctrl |  Alt |  F4  | GUI  |Lwr/VM| Bksp | Spc  | Ent  | Lock |   =  |  Alt | Del  |
+ * | Ctrl |  Alt |  F4  | GUI  | Bksp |Lwr/VM| Spc  | Ent  | Lock |   =  |  Alt | Del  |
  * `-----------------------------------------------------------------------------------'
  */
-[BASE] = LAYOUT( \
+[BASE] = LAYOUT_ortho_5x12( \
-    KC_GRV,        KC_1,         KC_2,  KC_3,    KC_4,           KC_5,    KC_6,    KC_7,    KC_8,    KC_9,   KC_0,            KC_MINUS, \
+    KC_GRV,        KC_1,         KC_2,  KC_3,    KC_4,    KC_5,           KC_6,    KC_7,    KC_8,    KC_9,   KC_0,            KC_MINUS, \
-    KC_TAB,        KC_Q,         KC_W,  KC_E,    KC_R,           KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,   KC_P,            KC_BSLASH, \
+    KC_TAB,        KC_Q,         KC_W,  KC_E,    KC_R,    KC_T,           KC_Y,    KC_U,    KC_I,    KC_O,   KC_P,            KC_BSLASH, \
-    KC_ESC,        KC_A,         KC_S,  KC_D,    KC_F,           KC_G,    KC_H,    KC_J,    KC_K,    KC_L,   KC_SCLN,         KC_QUOT, \
+    KC_ESC,        KC_A,         KC_S,  KC_D,    KC_F,    KC_G,           KC_H,    KC_J,    KC_K,    KC_L,   KC_SCLN,         KC_QUOT, \
-    OSM(MOD_LSFT), LCTL_T(KC_Z), KC_X,  KC_C,    KC_V,           KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT, RCTL_T(KC_SLSH), OSM(MOD_RSFT), \
+    OSM(MOD_LSFT), LCTL_T(KC_Z), KC_X,  KC_C,    KC_V,    KC_B,           KC_N,    KC_M,    KC_COMM, KC_DOT, RCTL_T(KC_SLSH), OSM(MOD_RSFT), \
-    KC_LCTL,       KC_LALT,      KC_F4, KC_LGUI, TD(TD_SYM_VIM), KC_BSPC, KC_SPC,  KC_ENT,  KC_LOCK, KC_EQL, KC_RALT,         KC_DEL \
+    KC_LCTL,       KC_LALT,      KC_F4, KC_LGUI, KC_BSPC, TD(TD_SYM_VIM), KC_SPC,  KC_ENT,  KC_LOCK, KC_EQL, KC_RALT,         KC_DEL \
 ),
 
 /* Symbols
@@ -50,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Pscr |      |      |      |      | GAME |   0  |   .  |   =  | Prev | Next | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[SYMB] = LAYOUT( \
+[SYMB] = LAYOUT_ortho_5x12( \
     KC_CAPS,        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,    KC_F6, KC_F7,  KC_F8,  KC_F9,   KC_F10,  KC_F11, \
     _______,        KC_EXLM, KC_AT,   KC_LPRN, KC_RPRN, KC_PIPE,  KC_7,  KC_8,   KC_9,   KC_ASTR, KC_RPRN, KC_F12, \
     _______,        KC_HASH, KC_DLR,  KC_LCBR, KC_RCBR, KC_GRV,   KC_4,  KC_5,   KC_6,   KC_PLUS, KC_RCBR, KC_PIPE, \
@@ -71,7 +66,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |      |      |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
-[VIM] =  LAYOUT( \
+[VIM] = LAYOUT_ortho_5x12( \
     _______, _______,  _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, \
     _______, _______,  _______,   KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, \
     _______, M(DLEFT), M(DRIGHT), KC_LCTL, KC_LGUI, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______, \
@@ -93,7 +88,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Enter|      | Lock | Bksp |  Alt |  Spc | Lower| Left |  Up  | Down | Right|QWERTY|
  * `-----------------------------------------------------------------------------------'
  */
-[GAME] =  LAYOUT( \
+[GAME] = LAYOUT_ortho_5x12( \
     KC_ESC,  _______, _______, _______, _______, _______, _______,   _______, _______, _______, _______, _______,    \
     _______, _______, _______, _______, _______, _______, _______,   _______, _______, _______, _______, _______,    \
     KC_LCTL, _______, _______, _______, KC_F,    _______, _______,   _______, _______, _______, _______, _______,    \

tmk_core/common/action_layer.c

@@ -296,7 +296,7 @@ action_t store_or_get_action(bool pressed, keypos_t key) {
  *
  * Gets the layer based on key info
  */
-int8_t layer_switch_get_layer(keypos_t key) {
+uint8_t layer_switch_get_layer(keypos_t key) {
 #ifndef NO_ACTION_LAYER
   action_t action;
   action.code = ACTION_TRANSPARENT;
@@ -304,7 +304,7 @@ int8_t layer_switch_get_layer(keypos_t key) {
   uint32_t layers = layer_state | default_layer_state;
   /* check top layer first */
   for (int8_t i = 31; i >= 0; i--) {
-    if (layers & (1UL<<i)) {
+    if (layers & (1UL << i)) {
       action = action_for_key(i, key);
       if (action.code != ACTION_TRANSPARENT) {
           return i;

tmk_core/common/action_layer.h

@@ -97,7 +97,7 @@ uint8_t read_source_layers_cache(keypos_t key);
 action_t store_or_get_action(bool pressed, keypos_t key);
 
 /* return the topmost non-transparent layer currently associated with key */
-int8_t layer_switch_get_layer(keypos_t key);
+uint8_t layer_switch_get_layer(keypos_t key);
 
 /* return action depending on current layer status */
 action_t layer_switch_get_action(keypos_t key);