arm_atsam ADC0 factory calibration correction

Factory calibration data was not being loaded properly for ADC0, which affects the accuracy of 5V readings.
[Keyboard] Additional info about TMO50 (#4980 )
2019-01-28 17:16:33 -08:00 · 2019-01-28 17:10:43 -08:00 · 2019-01-28 17:09:58 -08:00 · 2019-01-28 17:05:43 -08:00 · 2019-01-28 16:57:56 -08:00 · 2019-01-28 16:40:02 -08:00
585 changed files with 6387 additions and 5723 deletions
@@ -87,7 +87,7 @@ This is a C header file that is one of the first things included, and will persi
  * mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 * `#define LOCKING_RESYNC_ENABLE`
  * tries to keep switch state consistent with keyboard LED state
-* `#define IS_COMMAND() ( keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) )`
+* `#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))`
  * key combination that allows the use of magic commands (useful for debugging)
 * `#define USB_MAX_POWER_CONSUMPTION`
  * sets the maximum power (in mA) over USB for the device (default: 500)
@@ -60,21 +60,21 @@ Sometimes, you might want to switch between layers in a macro or as part of a ta
 These allow you to combine a modifier with a keycode. When pressed, the keydown event for the modifier, then `kc` will be sent. On release, the keyup event for `kc`, then the modifier will be sent.
-|Key       |Aliases               |Description                                         |
+|Key       |Aliases                        |Description                                         |
-|----------|----------------------|----------------------------------------------------|
+|----------|-------------------------------|----------------------------------------------------|
-|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
-|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
-|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
+|`LALT(kc)`|`A(kc)`                        |Hold Left Alt and press `kc`                        |
-|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
-|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
-|`RALT(kc)`|`ALGR(kc)`            |Hold Right Alt and press `kc`                       |
+|`RALT(kc)`|`ALGR(kc)`                     |Hold Right Alt and press `kc`                       |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
-|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
-|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
-|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
-|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
+|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
 You can also chain them, for example `LCTL(LALT(KC_DEL))` makes a key that sends Control+Alt+Delete with a single keypress.
@@ -110,20 +110,20 @@ For convenience, QMK includes some Mod-Tap shortcuts to make common combinations
 |Key         |Aliases                                                          |Description                                            |
 |------------|-----------------------------------------------------------------|-------------------------------------------------------|
 |`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
 |`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
 |`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
 |`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
 |`LALT_T(kc)`|`ALT_T(kc)`                                                      |Left Alt when held, `kc` when tapped                   |
 |`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
 |`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
 |`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
 |`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
 |`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
 |`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
 |`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
 |`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
 |`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
 |`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
 |`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 |`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
 |`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
 |`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
 |`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
 |`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
 |`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
 |`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 ## Caveats
@@ -40,6 +40,7 @@ To change the behaviour of the backlighting, `#define` these in your `config.h`:
 |---------------------|-------------|-------------------------------------------------------------------------------------------------------------|
 |`BACKLIGHT_PIN`      |`B7`         |The pin that controls the LEDs. Unless you are designing your own keyboard, you shouldn't need to change this|
 |`BACKLIGHT_LEVELS`   |`3`          |The number of brightness levels (maximum 15 excluding off)                                                   |
 |`BACKLIGHT_CAPS_LOCK`|*Not defined*|Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)                             |
 |`BACKLIGHT_BREATHING`|*Not defined*|Enable backlight breathing, if hardware PWM is used                                                          |
 |`BREATHING_PERIOD`   |`6`          |The length of one backlight "breath" in seconds                                                              |
@@ -16,35 +16,35 @@ To use Command, hold down the key combination defined by the `IS_COMMAND()` macr
 If you would like to change the key assignments for Command, `#define` these in your `config.h` at either the keyboard or keymap level. All keycode assignments here must omit the `KC_` prefix.
-|Define                              |Default                                                                               |Description                                     |
+|Define                              |Default                                                                    |Description                                     |
-|------------------------------------|--------------------------------------------------------------------------------------|------------------------------------------------|
+|------------------------------------|---------------------------------------------------------------------------|------------------------------------------------|
-|`IS_COMMAND()`                      |<code>(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
+|`IS_COMMAND()`                      |<code>(get_mods() == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                                |Set default layer with the Function row         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                     |Set default layer with the Function row         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                                |Set default layer with the number keys          |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                     |Set default layer with the number keys          |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                               |Set default layer with `MAGIC_KEY_LAYER0..9`    |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                    |Set default layer with `MAGIC_KEY_LAYER0..9`    |
-|`MAGIC_KEY_DEBUG`                   |`D`                                                                                   |Toggle debugging over serial                    |
+|`MAGIC_KEY_DEBUG`                   |`D`                                                                        |Toggle debugging over serial                    |
-|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                                   |Toggle key matrix debugging                     |
+|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                        |Toggle key matrix debugging                     |
-|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                                   |Toggle keyboard debugging                       |
+|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                        |Toggle keyboard debugging                       |
-|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                                   |Toggle mouse debugging                          |
+|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                        |Toggle mouse debugging                          |
-|`MAGIC_KEY_CONSOLE`                 |`C`                                                                                   |Enable the Command console                      |
+|`MAGIC_KEY_CONSOLE`                 |`C`                                                                        |Enable the Command console                      |
-|`MAGIC_KEY_VERSION`                 |`V`                                                                                   |Print the running QMK version to the console    |
+|`MAGIC_KEY_VERSION`                 |`V`                                                                        |Print the running QMK version to the console    |
-|`MAGIC_KEY_STATUS`                  |`S`                                                                                   |Print the current keyboard status to the console|
+|`MAGIC_KEY_STATUS`                  |`S`                                                                        |Print the current keyboard status to the console|
-|`MAGIC_KEY_HELP1`                   |`H`                                                                                   |Print Command help to the console               |
+|`MAGIC_KEY_HELP1`                   |`H`                                                                        |Print Command help to the console               |
-|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                               |Print Command help to the console (alternate)   |
+|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                    |Print Command help to the console (alternate)   |
-|`MAGIC_KEY_LAYER0`                  |`0`                                                                                   |Make layer 0 the default layer                  |
+|`MAGIC_KEY_LAYER0`                  |`0`                                                                        |Make layer 0 the default layer                  |
-|`MAGIC_KEY_LAYER1`                  |`1`                                                                                   |Make layer 1 the default layer                  |
+|`MAGIC_KEY_LAYER1`                  |`1`                                                                        |Make layer 1 the default layer                  |
-|`MAGIC_KEY_LAYER2`                  |`2`                                                                                   |Make layer 2 the default layer                  |
+|`MAGIC_KEY_LAYER2`                  |`2`                                                                        |Make layer 2 the default layer                  |
-|`MAGIC_KEY_LAYER3`                  |`3`                                                                                   |Make layer 3 the default layer                  |
+|`MAGIC_KEY_LAYER3`                  |`3`                                                                        |Make layer 3 the default layer                  |
-|`MAGIC_KEY_LAYER4`                  |`4`                                                                                   |Make layer 4 the default layer                  |
+|`MAGIC_KEY_LAYER4`                  |`4`                                                                        |Make layer 4 the default layer                  |
-|`MAGIC_KEY_LAYER5`                  |`5`                                                                                   |Make layer 5 the default layer                  |
+|`MAGIC_KEY_LAYER5`                  |`5`                                                                        |Make layer 5 the default layer                  |
-|`MAGIC_KEY_LAYER6`                  |`6`                                                                                   |Make layer 6 the default layer                  |
+|`MAGIC_KEY_LAYER6`                  |`6`                                                                        |Make layer 6 the default layer                  |
-|`MAGIC_KEY_LAYER7`                  |`7`                                                                                   |Make layer 7 the default layer                  |
+|`MAGIC_KEY_LAYER7`                  |`7`                                                                        |Make layer 7 the default layer                  |
-|`MAGIC_KEY_LAYER8`                  |`8`                                                                                   |Make layer 8 the default layer                  |
+|`MAGIC_KEY_LAYER8`                  |`8`                                                                        |Make layer 8 the default layer                  |
-|`MAGIC_KEY_LAYER9`                  |`9`                                                                                   |Make layer 9 the default layer                  |
+|`MAGIC_KEY_LAYER9`                  |`9`                                                                        |Make layer 9 the default layer                  |
-|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                                 |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                      |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                               |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                    |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                               |Enter the bootloader                            |
+|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                    |Enter the bootloader                            |
-|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                                |Lock the keyboard so nothing can be typed       |
+|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                     |Lock the keyboard so nothing can be typed       |
-|`MAGIC_KEY_EEPROM`                  |`E`                                                                                   |Clear the EEPROM                                |
+|`MAGIC_KEY_EEPROM`                  |`E`                                                                        |Clear the EEPROM                                |
-|`MAGIC_KEY_NKRO`                    |`N`                                                                                   |Toggle N-Key Rollover (NKRO)                    |
+|`MAGIC_KEY_NKRO`                    |`N`                                                                        |Toggle N-Key Rollover (NKRO)                    |
-|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                                   |Toggle LED when computer is sleeping            |
+|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                        |Toggle LED when computer is sleeping            |
@@ -319,43 +319,43 @@ This is a reference only. Each group of keys links to the page documenting their
 ## [Modifiers](feature_advanced_keycodes.md#modifier-keys)
-|Key       |Aliases               |Description                                         |
+|Key       |Aliases                        |Description                                         |
-|----------|----------------------|----------------------------------------------------|
+|----------|-------------------------------|----------------------------------------------------|
-|`KC_HYPR` |                      |Hold Left Control, Shift, Alt and GUI               |
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
-|`KC_MEH`  |                      |Hold Left Control, Shift and Alt                    |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
-|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
+|`LALT(kc)`|`A(kc)`                        |Hold Left Alt and press `kc`                        |
-|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
-|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
-|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
+|`RALT(kc)`|`ALGR(kc)`                     |Hold Right Alt and press `kc`                       |
-|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
-|`RALT(kc)`|`ALGR(kc)`            |Hold Right Alt and press `kc`                       |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
-|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
-|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
-|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
+|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
+|`KC_MEH`  |                               |Left Control, Shift and Alt                         |
-|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
+|`KC_HYPR` |                               |Left Control, Shift, Alt and GUI                    |
 ## [Mod-Tap Keys](feature_advanced_keycodes.md#mod-tap)
 |Key         |Aliases                                                          |Description                                            |
 |------------|-----------------------------------------------------------------|-------------------------------------------------------|
 |`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
 |`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
 |`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
 |`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
 |`LALT_T(kc)`|`ALT_T(kc)`                                                      |Left Alt when held, `kc` when tapped                   |
 |`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
 |`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
 |`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
 |`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
 |`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
 |`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
 |`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
 |`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
 |`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
 |`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
 |`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 |`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
 |`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
 |`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
 |`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
 |`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
 |`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
 |`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 ## [RGB Lighting](feature_rgblight.md)
@@ -128,11 +128,11 @@ unsigned char I2C_Write(unsigned char c)
        c <<= 1;
    }
-    
+
    I2C_WriteBit(0);
    _delay_us(I2C_DELAY);
    _delay_us(I2C_DELAY);
-  
+
    // _delay_us(I2C_DELAY);
    //return I2C_ReadBit();
    return 0;
@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -221,4 +216,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
@@ -38,11 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -38,11 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 #define RGB_DI_PIN B1
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -22,10 +22,5 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* prevent stuck modifiers */
 #define PREVENT_STUCK_MODIFIERS
@@ -121,11 +121,6 @@
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -30,7 +30,6 @@
 #define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 }
 #define UNUSED_PINS
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
@@ -38,7 +37,6 @@
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
@@ -90,11 +88,6 @@
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -199,4 +192,3 @@
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
@@ -97,11 +97,6 @@
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -122,11 +122,6 @@
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -122,11 +122,6 @@
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -37,11 +37,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0
@@ -77,11 +77,6 @@
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -34,11 +34,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* ws2812 RGB LED */
 #define RGB_DI_PIN B4
 #define RGBLIGHT_ANIMATIONS
@@ -52,7 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
@@ -99,11 +98,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -99,11 +99,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -110,11 +110,6 @@
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -28,11 +28,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* eliminate lag on space cadet mods */
 #define PERMISSIVE_HOLD
@@ -53,11 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* Enable GNAP matrix serial output */
 #define GNAP_ENABLE
@@ -30,7 +30,6 @@
 #define MATRIX_COL_PINS { B0, D2, D0, D1, D4, C6, D7, E6 }
 #define UNUSED_PINS { B4, B5, B6, B7, C7, F0, F1 }
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
@@ -38,7 +37,6 @@
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
@@ -90,11 +88,6 @@
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -199,4 +192,3 @@
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
@@ -36,11 +36,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 #define RGB_DI_PIN E2
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 20
@@ -0,0 +1,4 @@
 # ai03
 QMK folders for PCB commissions.
 Website: [ai03 Keyboard Designs](https://kb.ai03.me/)
@@ -0,0 +1,266 @@
 /*
 Copyright 2019 Ryota Goto
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "config_common.h"
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xA103
 #define PRODUCT_ID      0x0001
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Switchplate Peripherals
 #define PRODUCT         Lunar
 #define DESCRIPTION     65% AEK keyboard
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 15
 /*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
 #define MATRIX_ROW_PINS { B3, D0, D1, D2, D3 }
 #define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0 }
 #define UNUSED_PINS
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 /*
 * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
 */
 #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
 //   #define RGBLED_NUM 16
 //   #define RGBLIGHT_HUE_STEP 8
 //   #define RGBLIGHT_SAT_STEP 8
 //   #define RGBLIGHT_VAL_STEP 8
 //   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
 //   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
 // /*== all animations enable ==*/
 //   #define RGBLIGHT_ANIMATIONS
 // /*== or choose animations ==*/
 //   #define RGBLIGHT_EFFECT_BREATHING
 //   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
 //   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
 //   #define RGBLIGHT_EFFECT_SNAKE
 //   #define RGBLIGHT_EFFECT_KNIGHT
 //   #define RGBLIGHT_EFFECT_CHRISTMAS
 //   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
 //   #define RGBLIGHT_EFFECT_RGB_TEST
 //   #define RGBLIGHT_EFFECT_ALTERNATING
 // #endif
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 /* number of backlight levels */
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 /*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
 //#define FORCE_NKRO
 /*
 * Magic Key Options
 *
 * Magic keys are hotkey commands that allow control over firmware functions of
 * the keyboard. They are best used in combination with the HID Listen program,
 * found here: https://www.pjrc.com/teensy/hid_listen.html
 *
 * The options below allow the magic key functionality to be changed. This is
 * useful if your keyboard/keypad is missing keys and you want magic key support.
 *
 */
 /* key combination for magic key command */
 /* defined by default; to change, uncomment and set to the combination you want */
 // #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
 /* override magic key keymap */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
 //#define MAGIC_KEY_HELP1          H
 //#define MAGIC_KEY_HELP2          SLASH
 //#define MAGIC_KEY_DEBUG          D
 //#define MAGIC_KEY_DEBUG_MATRIX   X
 //#define MAGIC_KEY_DEBUG_KBD      K
 //#define MAGIC_KEY_DEBUG_MOUSE    M
 //#define MAGIC_KEY_VERSION        V
 //#define MAGIC_KEY_STATUS         S
 //#define MAGIC_KEY_CONSOLE        C
 //#define MAGIC_KEY_LAYER0_ALT1    ESC
 //#define MAGIC_KEY_LAYER0_ALT2    GRAVE
 //#define MAGIC_KEY_LAYER0         0
 //#define MAGIC_KEY_LAYER1         1
 //#define MAGIC_KEY_LAYER2         2
 //#define MAGIC_KEY_LAYER3         3
 //#define MAGIC_KEY_LAYER4         4
 //#define MAGIC_KEY_LAYER5         5
 //#define MAGIC_KEY_LAYER6         6
 //#define MAGIC_KEY_LAYER7         7
 //#define MAGIC_KEY_LAYER8         8
 //#define MAGIC_KEY_LAYER9         9
 //#define MAGIC_KEY_BOOTLOADER     PAUSE
 //#define MAGIC_KEY_LOCK           CAPS
 //#define MAGIC_KEY_EEPROM         E
 //#define MAGIC_KEY_NKRO           N
 //#define MAGIC_KEY_SLEEP_LED      Z
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */
 /* disable debug print */
 //#define NO_DEBUG
 /* disable print */
 //#define NO_PRINT
 /* disable action features */
 //#define NO_ACTION_LAYER
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 /*
 * MIDI options
 */
 /* Prevent use of disabled MIDI features in the keymap */
 //#define MIDI_ENABLE_STRICT 1
 /* enable basic MIDI features:
   - MIDI notes can be sent when in Music mode is on
 */
 //#define MIDI_BASIC
 /* enable advanced MIDI features:
   - MIDI notes can be added to the keymap
   - Octave shift and transpose
   - Virtual sustain, portamento, and modulation wheel
   - etc.
 */
 //#define MIDI_ADVANCED
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 /*
 * HD44780 LCD Display Configuration
 */
 /*
 #define LCD_LINES           2     //< number of visible lines of the display
 #define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
 #define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
 #if LCD_IO_MODE
 #define LCD_PORT         PORTB        //< port for the LCD lines
 #define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
 #define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
 #define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
 #define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
 #define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
 #define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
 #define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
 #define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
 #define LCD_RS_PORT      LCD_PORT     //< port for RS line
 #define LCD_RS_PIN       3            //< pin  for RS line
 #define LCD_RW_PORT      LCD_PORT     //< port for RW line
 #define LCD_RW_PIN       2            //< pin  for RW line
 #define LCD_E_PORT       LCD_PORT     //< port for Enable line
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
 /* Bootmagic Lite key configuration */
 // #define BOOTMAGIC_LITE_ROW 0
 // #define BOOTMAGIC_LITE_COLUMN 0
 /* VIA Configurator Compatibility */
 #define DYNAMIC_KEYMAP_LAYER_COUNT 4
 // EEPROM usage
 #define EEPROM_MAGIC 0x451F
 #define EEPROM_MAGIC_ADDR 32
 // Bump this every time we change what we store
 // This will automatically reset the EEPROM with defaults
 // and avoid loading invalid data from the EEPROM
 #define EEPROM_VERSION 0x08
 #define EEPROM_VERSION_ADDR 34
 // Dynamic keymap starts after EEPROM version
 #define DYNAMIC_KEYMAP_EEPROM_ADDR 35
 // DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR = DYNAMIC_KEYMAP_EEPROM_ADDR + (DYNAMIC_KEYMAP_LAYER_COUNT * MATRIX_ROWS * MATRIX_COLS * 2)
 #define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 635
 // DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE = 1024 - DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
 #define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 389   
 #define DYNAMIC_KEYMAP_MACRO_COUNT 16
@@ -0,0 +1,13 @@
 {
    "keyboard_name": "Lunar", 
    "url": "https://geekhack.org/index.php?topic=96112.0", 
    "maintainer": "ai03", 
    "bootloader": "", 
    "width": 16, 
    "height": 5, 
    "layouts": {
        "LAYOUT": {
            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Insert", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Home", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.5}, {"x":4.25, "y":4, "w":2.25}, {"x":6.5, "y":4, "w":1.5}, {"x":8, "y":4, "w":2.75}, {"label":"Alt", "x":10.75, "y":4, "w":1.25}, {"label":"Win", "x":12, "y":4}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}]
        }
    }
 }
@@ -0,0 +1,90 @@
 /* Copyright 2019 Ryota Goto
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 // Defines the keycodes used by our macros in process_record_user
 enum custom_keycodes {
  MANUAL = SAFE_RANGE,
  SWPLURL
 };
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	/*
 	Layout
 	K000 K001 K002 K003 K004 K005 K006 K007 K008 K009 K010 K011 K012 K013 K212 K014
 	K100  K101  K102 K103 K104 K105 K106 K107 K108 K109 K110 K111   K112  K113 K114
 	K200    K201 K202 K203 K204 K205 K206 K207 K208 K209 K210 K211     K213    K214
 	K300      K301 K302 K303 K304 K305 K306 K307 K308 K309 K310 K311    K313   K314
 	K400 K401 K402        K403       K405       K407       K409 K410 K411 K413 K414
 	K212 = Split backspace (bound to Del by default)
 	K403, K407 = Split space (bound to space by default)
 	K405 = Main space
 	*/
 	[0] = LAYOUT( /* Base */
 		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME, 
 		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_END, 
 		MO(1),            KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP, 
 		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_PGDN, 
 		KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,                    MO(1),   KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
 	),
 	[1] = LAYOUT( /* FN */
 		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  MANUAL, 
 		KC_CAPS,          _______, KC_UP,   _______, _______, _______, KC_NLCK, KC_P7,   KC_P8,   KC_P9,   KC_MPRV, KC_MPLY, KC_MNXT, _______, SWPLURL, 
 		_______,          KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, KC_VOLU, KC_P4,   KC_P5,   KC_P6,   _______, _______,          _______, _______, 
 		_______,          KC_RCTL, KC_RGUI, KC_RALT, _______, _______, KC_P0,   KC_P1,   KC_P2,   KC_P3,   _______, _______,          KC_PGUP, _______, 
 		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, KC_HOME, KC_PGDN, KC_END
 	)
 };
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  switch (keycode) {
    case MANUAL:
      if (record->event.pressed) {
        // when keycode QMKBEST is pressed
        SEND_STRING("https://kb.ai03.me/redir/lunar/index.html");
      } else {
        // when keycode QMKBEST is released
      }
      break;
    case SWPLURL:
      if (record->event.pressed) {
        // when keycode QMKURL is pressed
        SEND_STRING("https://switchplate.co/collections/lunar-group-buy");
      } else {
        // when keycode QMKURL is released
      }
      break;
  }
  return true;
 }
 void matrix_init_user(void) {
 }
 void matrix_scan_user(void) {
 }
 void led_set_user(uint8_t usb_led) {
 }
@@ -0,0 +1,2 @@
 # The default keymap for Lunar
 For use without VIA configurator.
@@ -0,0 +1,64 @@
 /* Copyright 2019 Ryota Goto
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 	/*
 	Layout
 	K000 K001 K002 K003 K004 K005 K006 K007 K008 K009 K010 K011 K012 K013 K212 K014
 	K100  K101  K102 K103 K104 K105 K106 K107 K108 K109 K110 K111   K112  K113 K114
 	K200    K201 K202 K203 K204 K205 K206 K207 K208 K209 K210 K211     K213    K214
 	K300      K301 K302 K303 K304 K305 K306 K307 K308 K309 K310 K311    K313   K314
 	K400 K401 K402        K403       K405       K407       K409 K410 K411 K413 K414
 	K212 = Split backspace (bound to Del by default)
 	K403, K407 = Split space (bound to space by default)
 	K405 = Main space
 	*/
 	[0] = LAYOUT( /* Base */
 		KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC, KC_HOME, 
 		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_END, 
 		MO(1),            KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP, 
 		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_PGDN, 
 		KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,                    MO(1),   KC_GRV,  KC_LEFT, KC_DOWN, KC_RGHT
 	),
 	[1] = LAYOUT( /* FN */
 		RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,  _______, 
 		KC_CAPS,          _______, KC_UP,   _______, _______, _______, KC_NLCK, KC_P7,   KC_P8,   KC_P9,   KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, 
 		_______,          KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_VOLD, KC_VOLU, KC_P4,   KC_P5,   KC_P6,   _______, _______,          _______, _______, 
 		_______,          KC_RCTL, KC_RGUI, KC_RALT, _______, _______, KC_P0,   KC_P1,   KC_P2,   KC_P3,   _______, _______,          KC_PGUP, _______, 
 		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, KC_HOME, KC_PGDN, KC_END
 	),
 	[2] = LAYOUT( /* Blank. For VIA compatibility */
 		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
 		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
 		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, 
 		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, 
 		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______, _______
 	),
 	[3] = LAYOUT( /* Blank. For VIA compatibility */
 		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
 		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
 		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, 
 		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, 
 		_______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______, _______
 	)
 };
@@ -0,0 +1,2 @@
 # The VIA keymap for Lunar
 This keymap is for compatibility with the VIA configurator.
@@ -0,0 +1,86 @@
 # MCU name
 #MCU = at90usb1286
 MCU = atmega32u4
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the
 #     processor frequency in Hz. You can then use this symbol in your source code to
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
 #     This will be an integer division of F_USB below, as it is sourced by
 #     F_USB after it has run through any CPU prescalers. Note that this value
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
 F_CPU = 16000000
 #
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
 ARCH = AVR8
 # Input clock frequency.
 #     This will define a symbol, F_USB, in all source code files equal to the
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
 #     at the end, this will be done automatically to create a 32-bit value in your
 #     source code.
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
 #   atmega32a    bootloadHID
 BOOTLOADER = atmel-dfu
 # If you don't know the bootloader type, then you can specify the
 # Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
 #   Teensy halfKay      512
 #   Teensy++ halfKay    1024
 #   Atmel DFU loader    4096
 #   LUFA bootloader     4096
 #   USBaspLoader        2048
 # OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = yes        # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 SRC += keyboards/wilba_tech/wt_main.c
 RAW_ENABLE = yes
 DYNAMIC_KEYMAP_ENABLE = yes
@@ -0,0 +1,22 @@
 /* Copyright 2019 Ryota Goto
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "lunar.h"
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
 	led_set_user(usb_led);
 }
@@ -0,0 +1,41 @@
 /* Copyright 2019 Ryota Goto
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "quantum.h"
 /* This a shortcut to help you visually see your layout.
 *
 * The first section contains all of the arguments representing the physical
 * layout of the board and position of the keys.
 *
 * The second converts the arguments into a two-dimensional array which
 * represents the switch matrix.
 */
 #define LAYOUT( \
 	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, K014, \
 	K100,       K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
 	K200,       K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,       K213, K214, \
 	K300,       K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
 	K400, K401, K402,       K403,       K405,       K407,             K409, K410, K411, K413, K414  \
 ) \
 { \
 	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
 	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
 	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214 }, \
 	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
 	{ K400,  K401,  K402,  K403,  KC_NO, K405,  KC_NO, K407,  KC_NO, K409,  K410,  K411,  KC_NO, K413,  K414 }  \
 }
@@ -0,0 +1,15 @@
 # Lunar
 ![Photo](https://i.imgur.com/hYoW8IJ.jpg)  
 A 65% keyboard made specifically for Alps SKCM/L switches and AEK/M0116 keycaps.
 Keyboard Maintainer: [ai03](https://github.com/ai03-2725)  
 Hardware Supported: Official Lunar PCB  
 Hardware Availability: [Switchplate Peripherals](https://switchplate.co/)  
 Make example for this keyboard (after setting up your build environment):
    make ai03/lunar:default
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -0,0 +1,81 @@
 # MCU name
 #MCU = at90usb1286
 MCU = atmega32u4
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the
 #     processor frequency in Hz. You can then use this symbol in your source code to
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
 #     This will be an integer division of F_USB below, as it is sourced by
 #     F_USB after it has run through any CPU prescalers. Note that this value
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
 F_CPU = 16000000
 #
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
 ARCH = AVR8
 # Input clock frequency.
 #     This will define a symbol, F_USB, in all source code files equal to the
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
 #     at the end, this will be done automatically to create a 32-bit value in your
 #     source code.
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 # Bootloader selection
 #   Teensy       halfkay
 #   Pro Micro    caterina
 #   Atmel DFU    atmel-dfu
 #   LUFA DFU     lufa-dfu
 #   QMK DFU      qmk-dfu
 #   atmega32a    bootloadHID
 BOOTLOADER = atmel-dfu
 # If you don't know the bootloader type, then you can specify the
 # Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
 #   Teensy halfKay      512
 #   Teensy++ halfKay    1024
 #   Atmel DFU loader    4096
 #   LUFA bootloader     4096
 #   USBaspLoader        2048
 # OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = yes        # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
@@ -50,7 +50,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
@@ -102,11 +101,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -221,4 +216,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
@@ -38,11 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -19,13 +19,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 /* LAYOUT
 * ┌───┐ ┌───┬───┬───┬───┬───┬───┬───┐         ┌───┬───┬───┬───┬───┬───┬───┬───┐
 * │63 │ │00 │01 │02 │03 │04 │05 │06 │         │07 │08 │09 │10 │11 │12 │13 │14 │
 * ├───┤ ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┘       ┌─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
 * │64 │ │15   │16 │17 │18 │19 │20 │         │21 │22 │23 │24 │25 │26 │27 │28   │
 * ├───┤ ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┐        └┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
 * │65 │ │29    │30 │31 │32 │33 │34 │         │35 │36 │37 │38 │39 │40 │41      │
 * └───┘ ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┐     ┌─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
 *       │42      │43 │44 │45 │46 │47 │     │48 │49 │50 │51 │52 │53 │54    │55 │
 *       ├─────┬──┴──┬┴───┴┬──┴───┴┬──┴─┐   ├───┴───┴──┬┴───┴┬──┴───┴────┬─┴───┤
 *       │56   │     │57   │58     │59  │   │60        │61   │           │62   │
 *       └─────┘     └─────┴───────┴────┘   └──────────┴─────┘           └─────┘
 */
 #define LAYOUT( \
-  K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, \
+  K63,   K00, K01, K02, K03, K04, K05, K06,      K07, K08, K09, K10, K11, K12, K13, K14, \
-  K15, K16, K17, K18, K19, K20, K21, K22, K23, K24, K25, K26, K27, K28,      \
+  K64,   K15, K16, K17, K18, K19, K20,      K21, K22, K23, K24, K25, K26, K27, K28,      \
-  K29, K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K41,           \
+  K65,   K29, K30, K31, K32, K33, K34,      K35, K36, K37, K38, K39, K40,      K41,      \
-  K42, K43, K44, K45, K46, K47, K48, K49, K50, K51, K52, K53, K54, K55,      \
+         K42, K43, K44, K45, K46, K47,      K48, K49, K50, K51, K52, K53, K54, K55,      \
-  K56, K57, K58, K59, K60, K61, K62,                                         \
+         K56,      K57,      K58, K59,           K60,      K61,                K62       \
  K63, K64, K65                                                              \
 ) \
 { \
  { K00  , K01  , K02  , K03  , K04  , K05  , K06  , K07  , K08  , K09  , K10  , K11  , K12  , K13  , K14   }, \
@@ -37,6 +37,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define NO_UART 1
 #define BOOTLOADHID_BOOTLOADER 1
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
@@ -6,7 +6,75 @@
  "height": 5,
  "layouts": {
    "LAYOUT": {
-      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.25, "y":0}, {"label":"!", "x":2.25, "y":0}, {"label":"@", "x":3.25, "y":0}, {"label":"#", "x":4.25, "y":0}, {"label":"$", "x":5.25, "y":0}, {"label":"%", "x":6.25, "y":0}, {"label":"^", "x":7.25, "y":0}, {"label":"&", "x":9.75, "y":0}, {"label":"*", "x":10.75, "y":0}, {"label":"(", "x":11.75, "y":0}, {"label":")", "x":12.75, "y":0}, {"label":"_", "x":13.75, "y":0}, {"label":"+", "x":14.75, "y":0}, {"label":"|", "x":15.75, "y":0}, {"label":"~", "x":16.75, "y":0}, {"label":"Insert", "x":0, "y":1}, {"label":"Tab", "x":1.25, "y":1, "w":1.5}, {"label":"Q", "x":2.75, "y":1}, {"label":"W", "x":3.75, "y":1}, {"label":"E", "x":4.75, "y":1}, {"label":"R", "x":5.75, "y":1}, {"label":"T", "x":6.75, "y":1}, {"label":"Y", "x":9.25, "y":1}, {"label":"U", "x":10.25, "y":1}, {"label":"I", "x":11.25, "y":1}, {"label":"O", "x":12.25, "y":1}, {"label":"P", "x":13.25, "y":1}, {"label":"{", "x":14.25, "y":1}, {"label":"}", "x":15.25, "y":1}, {"label":"Backspace", "x":16.25, "y":1, "w":1.5}, {"label":"Delete", "x":0, "y":2}, {"label":"Caps Lock", "x":1.25, "y":2, "w":1.75}, {"label":"A", "x":3, "y":2}, {"label":"S", "x":4, "y":2}, {"label":"D", "x":5, "y":2}, {"label":"F", "x":6, "y":2}, {"label":"G", "x":7, "y":2}, {"label":"H", "x":9.5, "y":2}, {"label":"J", "x":10.5, "y":2}, {"label":"K", "x":11.5, "y":2}, {"label":"L", "x":12.5, "y":2}, {"label":":", "x":13.5, "y":2}, {"label":"\"", "x":14.5, "y":2}, {"label":"Enter", "x":15.5, "y":2, "w":2.25}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":9, "y":3}, {"label":"N", "x":10, "y":3}, {"label":"M", "x":11, "y":3}, {"label":"<", "x":12, "y":3}, {"label":">", "x":13, "y":3}, {"label":"?", "x":14, "y":3}, {"label":"Shift", "x":15, "y":3, "w":1.75}, {"label":"Fn", "x":16.75, "y":3}, {"label":"Ctrl", "x":1.25, "y":4, "w":1.5}, {"label":"Alt", "x":3.5, "y":4, "w":1.5}, {"x":5, "y":4, "w":2.25}, {"label":"Win", "x":7.25, "y":4, "w":1.25}, {"x":9, "y":4, "w":2.75}, {"label":"Alt", "x":11.75, "y":4, "w":1.5}, {"label":"Ctrl", "x":16.25, "y":4, "w":1.5}]
+      "key_count": 66,
      "layout": [
        {"label":"K63", "x":0, "y":0},
        {"label":"K00", "x":1.25, "y":0},
        {"label":"K01", "x":2.25, "y":0},
        {"label":"K02", "x":3.25, "y":0},
        {"label":"K03", "x":4.25, "y":0},
        {"label":"K04", "x":5.25, "y":0},
        {"label":"K05", "x":6.25, "y":0},
        {"label":"K06", "x":7.25, "y":0},
        {"label":"K07", "x":10.25, "y":0},
        {"label":"K08", "x":11.25, "y":0},
        {"label":"K09", "x":12.25, "y":0},
        {"label":"K10", "x":13.25, "y":0},
        {"label":"K11", "x":14.25, "y":0},
        {"label":"K12", "x":15.25, "y":0},
        {"label":"K13", "x":16.25, "y":0},
        {"label":"K14", "x":17.25, "y":0},
        {"label":"K64", "x":0, "y":1},
        {"label":"K15", "x":1.25, "y":1, "w":1.5},
        {"label":"K16", "x":2.75, "y":1},
        {"label":"K17", "x":3.75, "y":1},
        {"label":"K18", "x":4.75, "y":1},
        {"label":"K19", "x":5.75, "y":1},
        {"label":"K20", "x":6.75, "y":1},
        {"label":"K21", "x":9.75, "y":1},
        {"label":"K22", "x":10.75, "y":1},
        {"label":"K23", "x":11.75, "y":1},
        {"label":"K24", "x":12.75, "y":1},
        {"label":"K25", "x":13.75, "y":1},
        {"label":"K26", "x":14.75, "y":1},
        {"label":"K27", "x":15.75, "y":1},
        {"label":"K28", "x":16.75, "y":1, "w":1.5},
        {"label":"K65", "x":0, "y":2},
        {"label":"K29", "x":1.25, "y":2, "w":1.75},
        {"label":"K30", "x":3, "y":2},
        {"label":"K31", "x":4, "y":2},
        {"label":"K32", "x":5, "y":2},
        {"label":"K33", "x":6, "y":2},
        {"label":"K34", "x":7, "y":2},
        {"label":"K35", "x":10, "y":2},
        {"label":"K36", "x":11, "y":2},
        {"label":"K37", "x":12, "y":2},
        {"label":"K38", "x":13, "y":2},
        {"label":"K39", "x":14, "y":2},
        {"label":"K40", "x":15, "y":2},
        {"label":"K41", "x":16, "y":2, "w":2.25},
        {"label":"K42", "x":1.25, "y":3, "w":2.25},
        {"label":"K43", "x":3.5, "y":3},
        {"label":"K44", "x":4.5, "y":3},
        {"label":"K45", "x":5.5, "y":3},
        {"label":"K46", "x":6.5, "y":3},
        {"label":"K47", "x":7.5, "y":3},
        {"label":"K48", "x":9.5, "y":3},
        {"label":"K49", "x":10.5, "y":3},
        {"label":"K50", "x":11.5, "y":3},
        {"label":"K51", "x":12.5, "y":3},
        {"label":"K52", "x":13.5, "y":3},
        {"label":"K53", "x":14.5, "y":3},
        {"label":"K54", "x":15.5, "y":3, "w":1.75},
        {"label":"K55", "x":17.25, "y":3},
        {"label":"K56", "x":1.25, "y":4, "w":1.5},
        {"label":"K57", "x":4.25, "y":4, "w":1.5},
        {"label":"K58", "x":5.75, "y":4, "w":2},
        {"label":"K59", "x":7.75, "y":4, "w":1.25},
        {"label":"K60", "x":9.5, "y":4, "w":2.75},
        {"label":"K61", "x":12.25, "y":4, "w":1.5},
        {"label":"K62", "x":16.75, "y":4, "w":1.5}
      ]
    }
  }
 }
@@ -19,19 +19,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    [0] = LAYOUT(
-        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSLS, \
+        KC_ESC,     KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSLS, \
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,         \
+        KC_PGUP,    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
-        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                   \
+        KC_PGDN,    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           \
-        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),           \
+                    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),            \
-        KC_LGUI, KC_LALT, KC_SPC,  KC_LGUI, KC_SPC,  KC_RALT, KC_RCTL,                                                                      \
+                    KC_LGUI,          KC_LALT,          KC_SPC,  KC_LGUI,          KC_SPC,           KC_RALT,                            KC_RCTL           \
        KC_ESC,  KC_PGUP, KC_PGDN                                                                                                     \
    ),
    [1] = LAYOUT(
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP  , _______, _______,         \
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP  , _______, _______,          \
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______,                   \
+        _______,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT,          _______,          \
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______,           \
+                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______,          \
-        _______, _______, _______, _______, _______, _______, _______,                                                                      \
+                    _______,          _______,          _______, _______,          _______,          _______,                            _______           \
        _______, _______, _______                                                                                                      \
    ),
 };
@@ -19,19 +19,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    [0] = LAYOUT(
-        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSLS, \
+        KC_ESC,     KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV,  KC_BSLS, \
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,         \
+        KC_PGUP,    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,          \
-        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                   \
+        KC_PGDN,    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,           \
-        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),           \
+                    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),            \
-        KC_LGUI, KC_LALT, KC_SPC,  KC_LGUI, KC_SPC,  KC_RALT, KC_RCTL,                                                                      \
+                    KC_LGUI,          KC_LALT,          KC_SPC,  KC_LGUI,          KC_SPC,           KC_RALT,                            KC_RCTL           \
        KC_ESC,  KC_PGUP, KC_PGDN                                                                                                     \
    ),
    [1] = LAYOUT(
-        KC_GRV , KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_INS, \
+        RESET,      KC_GRV , KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_INS,  \
-        _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, KC_UP  , _______, _______,         \
+        _______,    _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, KC_UP  , _______, _______,          \
-        _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______,                   \
+        _______,    _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______,                   \
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______,           \
+                    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______,          \
-        _______, _______, _______, _______, _______, _______, _______,                                                                      \
+                    _______,          _______,          _______, _______,          _______,          _______,                            _______           \
        RESET,   _______, _______                                                                                                      \
    ),
 };
@@ -38,12 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 #define RGB_DI_PIN F4
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -47,13 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -54,11 +54,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLED_NUM 16
@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* Backlight configuration
 */
 #define BACKLIGHT_LEVELS 4
@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* Backlight configuration
 */
 #define BACKLIGHT_LEVELS 4
@@ -114,11 +114,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* Backlight configuration
 */
 #define BACKLIGHT_LEVELS 4
@@ -33,8 +33,3 @@
 /* force n-key rollover*/
 #define FORCE_NKRO
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* Backlight configuration
 */
 #define BACKLIGHT_LEVELS 4
@@ -49,12 +49,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCING_DELAY 5
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* Backlight configuration
 */
 #define BACKLIGHT_LEVELS 4
@@ -98,11 +98,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -53,7 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Enable Keyboard Locking via magic key
 #define KEYBOARD_LOCK_ENABLE
 /*
 * Force NKRO
 *
@@ -87,11 +86,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -153,7 +147,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 //#define VIBRATO_ENABLE
 //#define VIBRATO_STRENGTH_ENABLE
@@ -66,11 +66,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -18,10 +18,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_H
 #define CONFIG_H
 #include "config_common.h"
 // mouse speed
 #define MOUSEKEY_INTERVAL       15
@@ -80,11 +78,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 /* Make Overloaded Keys switch faster */
 #define TAPPING_TERM 150
@@ -70,11 +69,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -55,11 +55,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -221,4 +216,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
@@ -56,11 +56,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -67,8 +67,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
@@ -0,0 +1,22 @@
 {
  "keyboard_name": "Keeb.io BDN9",
  "url": "",
  "maintainer": "nooges",
  "width": 3,
  "height": 3,
  "layouts": {
    "LAYOUT": {
      "layout": [
        {"x":0, "y":0},
        {"x":1, "y":0},
        {"x":2, "y":0},
        {"x":0, "y":1},
        {"x":1, "y":1},
        {"x":2, "y":1},
        {"x":0, "y":2},
        {"x":1, "y":2},
        {"x":2, "y":2}
      ]
    }
  }
 }
@@ -21,7 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0x20A0
 #define PRODUCT_ID      0x422D
-// You can edit those at usbconfig.h about line 250. These values will 
+// You can edit those at usbconfig.h about line 250. These values will
 // unforunatly be ignored so far
 #define MANUFACTURER    winkeyless.kr
 #define PRODUCT         b.face
@@ -36,9 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define NO_UART 1
 #define BOOTLOADHID_BOOTLOADER 1
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 #ifdef BACKLIGHT_ENABLE
 	// the backlight PWM does not work (yet). Therefore, we only have two backlight levels (on/off)
 	#define BACKLIGHT_LEVELS 1
@@ -43,7 +43,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define NO_UART 1
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 #endif
@@ -46,11 +46,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* ws2812 RGB LED */
 #define RGB_DI_PIN B4
@@ -74,5 +69,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 #endif
@@ -58,8 +58,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_ANIMATIONS
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
@@ -111,11 +109,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -35,7 +35,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define NO_UART 1
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 #endif
@@ -35,7 +35,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_LEVELS 5
 #define NO_UART 1
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
@@ -85,11 +85,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6050
@@ -53,7 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
@@ -100,11 +98,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -3,12 +3,13 @@
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
-#define  C(kc) LCTL(KC_##kc)
+#undef C
 #undef S
 #define C(kc) LCTL(KC_##kc)
 #define S(kc) LSFT(KC_##kc)
 #define RA(kc) RALT(KC_##kc)
 #define KC_SLCT KC_SELECT
 #define MEDAPP LT(MEDIA, KC_APP)
 #undef S
 #define S(kc) LSFT(KC_##kc)
 uint8_t current_layer_global = 255;
@@ -38,9 +38,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
 	keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 #endif
@@ -17,11 +17,15 @@
 #include QMK_KEYBOARD_H
 /* Allow shortcuts for combos like RALT(KC_RBRC) that don't take up more than 7 characters: */
-#define G(kc) RALT(KC_##kc)
+/* Original shortcuts (quantum_keycodes.h) take full-sized keycodes: too long! */
-#define A(kc) LALT(KC_##kc)
+#undef C
 #undef S
 #undef A
 #undef G
 #define C(kc) LCTL(KC_##kc)
 #undef S /* Original shortcut (quantum_keycodes.h) takes full-sized keycodes: too long! */
 #define S(kc) LSFT(KC_##kc)
 #define A(kc) LALT(KC_##kc)
 #define G(kc) RALT(KC_##kc)
 #define CTALDEL LCTL(LALT(KC_DEL))
 enum layers {
@@ -85,11 +85,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -83,11 +83,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -63,11 +63,6 @@
 */
 //#define FORCE_NKRO
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -118,4 +113,3 @@
 // #define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
 //#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
 //#define WS2812_EXTERNAL_PULLUP
@@ -43,7 +43,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define NO_UART 1
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 #endif
@@ -44,13 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -41,12 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ONESHOT_TIMEOUT 500
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -112,7 +112,7 @@ uint8_t matrix_scan(void)
            if (timeout > 10000){
                break;
            }
-        } 
+        }
        uart_data[i] = SERIAL_UART_DATA;
    }
@@ -134,7 +134,7 @@ uint8_t matrix_scan(void)
 inline
 bool matrix_is_on(uint8_t row, uint8_t col)
 {
-    return (matrix[row] & ((matrix_row_t)1<col));
+    return (matrix[row] & ((matrix_row_t)1<<col));
 }
 inline
@@ -41,12 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ONESHOT_TIMEOUT 500
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -116,7 +116,7 @@ uint8_t matrix_scan(void)
            if (timeout > 10000){
                break;
            }
-        } 
+        }
        uart_data[i] = SERIAL_UART_DATA;
    }
@@ -138,7 +138,7 @@ uint8_t matrix_scan(void)
 inline
 bool matrix_is_on(uint8_t row, uint8_t col)
 {
-    return (matrix[row] & ((matrix_row_t)1<col));
+    return (matrix[row] & ((matrix_row_t)1<<col));
 }
 inline
@@ -41,12 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ONESHOT_TIMEOUT 500
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -102,7 +102,7 @@ uint8_t matrix_scan(void)
            if (timeout > 10000){
                break;
            }
-        } 
+        }
        uart_data[i] = SERIAL_UART_DATA;
    }
@@ -124,7 +124,7 @@ uint8_t matrix_scan(void)
 inline
 bool matrix_is_on(uint8_t row, uint8_t col)
 {
-    return (matrix[row] & ((matrix_row_t)1<col));
+    return (matrix[row] & ((matrix_row_t)1<<col));
 }
 inline
@@ -35,11 +35,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 8
@@ -55,9 +55,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 #endif
@@ -121,11 +121,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -194,4 +189,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
@@ -53,7 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
@@ -105,11 +104,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -53,7 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
@@ -100,11 +99,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -62,11 +62,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* Underlight configuration
 */
 #define RGB_DI_PIN F6
@@ -115,11 +115,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -80,11 +80,6 @@
 */
 //#define FORCE_NKRO
 /* key combination for magic key command */
 #define IS_COMMAND() ( \
 	keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -32,11 +32,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -31,11 +31,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
@@ -31,11 +31,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
Author	SHA1	Message	Date
patrickmt	60ae309ced	arm_atsam ADC0 factory calibration correction Factory calibration data was not being loaded properly for ADC0, which affects the accuracy of 5V readings.	2019-01-28 17:16:33 -08:00
Emīls Delle	9e784841c0	[Keyboard] Additional info about TMO50 (#4980 ) * Create ISO HHKB keymapping for GH60 * Add media controls to Fn layer * Use M(x) instead of F(x), add Copyright text * Add README for additional information about TMO50 features/quirks	2019-01-28 17:10:43 -08:00
noroadsleft	02180c87f2	handwired/space_oddity: refactor, Configurator support and readme cleanup (#4977 ) * handwired/space_oddity: refactor - config.h: updated to use #pragma once include guard - rules.mk: replace `?=` with `=` - space_oddity.h: - updated to use #pragma once include guard - layout macro KEYMAP renamed to LAYOUT - default keymap: - updated to use #include QMK_KEYBOARD_H - replace references to Planck keycodes - replace fn_actions-powered layer switch keycode - rebuild keymap block comments - keymap layers now use short-form keycodes - refactor action_get_macro keycodes into process_record_user * handwired/space_oddity: Configurator support * handwired/space_oddity: readme cleanup - update readme to better conform with QMK template - fixed the make command.	2019-01-28 17:09:58 -08:00
Brice Figureau	03d9e3fe79	[Keyboard] E7-V1 keyboard support (#4965 ) * Add the e7-v1 keyboard The e7-v1 is a 75% keyboard made by Exclusive based on an Atmega32u4 pub with RGB lights on top and backlighting. This PR add supports for the regular ANSI layout and ANSI split backspace layout. No ISO yet :( * My e7-v1 keymap Difference from base layout: * split backspace * Home & End on last keys of row 0 instead of Insert/Del * Fn is on the End key when hold * supports both a windows/linux keymap and osx keymap * layer change is reflected in the rgb leds of the logo	2019-01-28 17:05:43 -08:00
Rockman18	df251d7a13	Backlight - New option : BACKLIGHT_CAPS_LOCK (#4769 ) * [BACKLIGHT_CAPS_LOCK_INDICATOR] Use backlight toggling as Caps Lock LED I've implemented this feature because S65-X doesn't have LED indicators and the existing led_set_kb(usb_led) function try to use backlight as indicator but that creates an inconsistency with backlight_config state. - define `BACKLIGHT_CAPS_LOCK_INDICATOR` to enable Caps Lock indicator using backlight (for keyboards without dedicated LED) - Don't turn off LED indicators when suspend because backlight is already turned off. Else led_set(0) will turn back on backlight. - Documentation has been updated * [BACKLIGHT_CAPS_LOCK_INDICATOR] Turn off all LED indicators except Caps Lock if BACKLIGHT_CAPS_LOCK_INDICATOR * [BACKLIGHT_CAPS_LOCK] Rename BACKLIGHT_CAPS_LOCK_INDICATOR * [BACKLIGHT_CAPS_LOCK] Use new IS_LED_ON method	2019-01-28 16:57:56 -08:00
Andrew Kannan	0f507f0169	Practice60 RGB and PWM Backlight (#4929 ) * Update Practice60 to enable RGB via SPI DMA and use PWM backlight breathing * Correct stm32f103c8t6 flash size in eeprom definition * Remove unused files and improve ifdef checks * Update quantum/rgblight.c Co-Authored-By: awkannan <[email protected]> * Update quantum/rgblight.c Co-Authored-By: awkannan <[email protected]> * EEPROM implementation fix and updated p60 code * Update define * Remove dead code * Update keymap to remove test key * Update keymap again	2019-01-28 16:40:02 -08:00
noroadsleft	d9120412d3	Fix layouts for S7 Elephant in info.json (#4989 ) The following layouts were being rendered with 6.75u Spacebars instead of 7u: - LAYOUT_ansi_blocker_7u - LAYOUT_ansi_blocker_7u_small_lshift - LAYOUT_ansi_blocker_7u_small_bspc - LAYOUT_ansi_blocker_7u_small_lshift_small_bspc - LAYOUT_iso_blocker_7u This commit corrects this issue. Flagged by yanfali on QMK Discord.	2019-01-28 15:24:34 -08:00
mtei	12a2572295	Prevent wasteful writing to eeprom.	2019-01-28 14:57:41 -08:00
ai03	5672dc8030	Add Lunar Keyboard (#4976 ) * Generate project * Adjust files * Get things working * Update readme * Add VIA configurator compatibility * Grammar * Update keymap * Split lunar info default and VIA keymaps * Copyrights * VIA tuneup * A few missed copyrights * Remove unnecessary junk * Remove unnecessary bits, fix readme	2019-01-28 12:34:42 -08:00
noroadsleft	693e1afa59	BDN9 Configurator support (#4978 )	2019-01-28 08:28:47 -08:00
noroadsleft	ad6a7e9cec	Alice: refactor and Configurator bugfix (#4979 ) - layout macro and keymap layers refactored to more closely resemble physical keyboard layout - added layout mockup to alice.h - correct info.json data (was missing a key)	2019-01-28 06:40:13 -08:00
Drashna Jaelre	af04936e1f	Add default layout for e6_rgb (#4973 )	2019-01-27 21:05:26 -08:00
f00_B34rd	e0e8097162	[Keyboard] Add Southpole keyboard (#4946 ) * Added southpole keyboard added southpole keyboard folder and files including keymaps folder. Keymaps have errors and will not compile yet * Add files via upload added manufacturer and product name and description * Update config.h * Add files via upload changed formating added layer * cleaned up files, fixed foobeard keymap, and added maker info * fixed keymap files * Update keyboards/southpole/keymaps/foobeard/keymap.c Co-Authored-By: ericduns <[email protected]> * Update keyboards/southpole/keymaps/default/keymap.c Co-Authored-By: ericduns <[email protected]> * made changes fixing outdated lines and added readme.md * made requested changes for pr to all files * removed vs code and added new line to southpole.h	2019-01-27 18:05:11 -08:00
VM	5eba88809e	[Keymap] some mods to my (omgvee) Helidox keymap (#4972 ) * moved some stuff around on my iris layout, but don't expect a lot of changes in the future * good working setup * [keymap] some mods to my (omgvee) Helidox keymap	2019-01-27 17:46:06 -08:00
Maxr1998	795f743c04	[Keymap] Support FX keys on Maxr1998's Contra Using update_tri_layer() and more manual layer switching, also rename some layers & keycodes	2019-01-27 17:44:54 -08:00
CodingDog	17d3750f13	[Keymap] updated zlant default keymap with diagram (#4954 ) * updated zlant keymap with diagram * made edites to last post * noticed slight error in default keymap due to my own mistake. fixed to be the same as default * fixed spacing in second base layer second row from left	2019-01-27 17:35:23 -08:00
VM	0ea336c03d	[Keymap] small update to my (omgvee) IRIS keymap (#4969 ) * moved some stuff around on my iris layout, but don't expect a lot of changes in the future * good working setup	2019-01-27 17:34:41 -08:00
Alex Ong	0d76319370	[Keyboard] Added xealousbrown keyboard (#4945 ) * Added xealousbrown keyboard. * Changed to pragma once in config.h * Update keyboards/handwired/xealousbrown/rules.mk Added bootloader. Co-Authored-By: alex-ong <[email protected]> * Update keyboards/handwired/xealousbrown/config.h Commented out IS_COMMAND() since it is already default value. Co-Authored-By: alex-ong <[email protected]>	2019-01-27 17:05:34 -08:00
yulei	996ada1ba2	[Keyboard] add rgb pcb for e6 keyboard (#4928 ) * add e6_rgb * update according to the reviewer * fixed readme.md * rename 60_split_bs_shift to 60_ansi_split_bs_shift	2019-01-27 16:57:50 -08:00
Konstantin Đorđević	6ba0b818e9	[Keymap] Update personal userspace and keymaps (#4963 ) * Remove duplicated or unnecessary definitions in config.h and rules.mk * Use IS_HOST_LED_ON() macro * Add mouse acceleration to kbd6x:konstantin keymap * Clear and restore mods when sending macros * Make SEND_STRING_CLEAN a config option * Add NO_ACTION_ONESHOT to userspace config	2019-01-27 08:46:54 -08:00
stanrc85	5c1d4baec4	[Keymap] Layout added for stanrc85 (#4944 ) * Add files via upload * Changed _____ to _______ as requested to meet QMK standards. * Added readme.md * Removed "PERMISSIVE_HOLD" as it is no longer used. * Additional code changes made per request * Added # to first line and removed redundant line. * Modified Copyright information * Added space after # for proper formatting * Formatting changes and additional details	2019-01-27 08:45:30 -08:00
James Churchill	6d2071ad6e	Fix `1<col` instead of `1<<col` typo in matrix_is_on()	2019-01-27 08:37:26 -08:00
Konstantin Đorđević	4d9b11af14	Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955 ) * Remove unnecessary IS_COMMAND definition in clueboard/66/rev4 * Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions * Update docs to use get_mods() instead of keyboard_report->mods * Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist * Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)	2019-01-27 00:28:40 -08:00
Max Rumpf	53d86b2c57	[Keymap] Small improvements to Maxr1998's Contra keymap (#4952 ) Add backslash, disable Super key in "Gaming" mode	2019-01-27 00:23:58 -08:00
MechMerlin	287f6766b6	[Keymap] Minor updates to my dz60 keymap (#4943 )	2019-01-27 00:15:32 -08:00
Daniel H Klein	9ae800fab3	[Keyboard] UniGo66 keyboard added (#4913 ) * UniGo66 keyboard added * UniGo66 keyboard added * case correction of unigo66 files * create sirius folder * Update keyboards/sirius/unigo66/rules.mk Co-Authored-By: danielhklein <[email protected]> * Update keyboards/sirius/unigo66/keymaps/danielhklein/keymap.c Co-Authored-By: danielhklein <[email protected]> * Update keyboards/sirius/unigo66/keymaps/default/config.h Co-Authored-By: danielhklein <[email protected]> * Update keyboards/sirius/unigo66/keymaps/danielhklein/config.h Co-Authored-By: danielhklein <[email protected]> * debugging * correct keymap to layout * readme * remove common config * suggested changes to config.h * default keymap cleanup	2019-01-27 00:12:05 -08:00
Drashna Jaelre	5d26ebcbaa	[Keymap] Move Iris via support to Via keymap (#4893 ) * Move Iris via support to Via keymap And move it out of the main keyboard files * Actually add via keymap folder Because using git when you're tired is apparently a very bad idea, and you do stupid things like not running git add * Clean up config.h file for iris via keymap	2019-01-27 00:09:03 -08:00
Drashna Jaelre	b05c0e46c6	Adds a default value for IS_COMMAND for COMMAND feature (#4301 ) * Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition	2019-01-26 15:49:45 -08:00
seebs	478538e0d9	[Keyboard] drop unused i2c files (#4948 ) The Ergodox EZ used to use twimaster.c/i2cmaster.h, but now uses a standard centralized AVR i2c driver. Drop the now-unused files.	2019-01-26 11:17:16 -08:00
Danny	438386401f	[Keymap] Add Maxim keymap for Fourier (#4534 ) * Add maxim keymap * Add QMK DFU configuration to Fourier * Update config.h * Update keymap.c * Update config.h	2019-01-26 08:58:02 -08:00
Jack Humbert	8da9d3330e	use built-in arm stuff	2019-01-26 11:36:35 -05:00
Chuck Lauer Vose	0772b4932c	[Keymap] Add userspace files for vosechu (#4912 ) * Add userspace files for vosechu * Code review corrections * Few more code review corrections	2019-01-26 07:55:42 -08:00
Drashna Jaelre	7aba1fd176	Fix RGBLIGHT_SLEEP function (#4865 ) * Only re-enable RGBLIGHT if it was on when going to sleep * Reformat file to follow QMK Standards * Fix check, since this is a loop, whoops Much thanks to @Rockman18 for catching this and posting the additional code!	2019-01-25 17:11:49 -08:00
Drashna Jaelre	569ed9db9d	Revert Commit `1d3b9eea94` (#4942 ) Was not supposed to merge 4763 yet This reverts commit `1d3b9eea94`.	2019-01-25 17:11:19 -08:00
Drashna Jaelre	0306e487e2	Circular animation (#4796 ) * Add ability to animate arm_atsam led matrix from the center of a circle * Make arm_atsam led matrix circular animation circular rather than obloid * Fix indentation in tmk_core led_matrix.c	2019-01-25 16:04:21 -08:00
walkerstop	1d3b9eea94	[Keyboard] Support for Wheat Field Peripherals blocked 65% PCB (#4763 ) * Basic Fanoe support (no LED yet) * Enable RGB lights * Backlighting support * Change to reflect Wheat Field brand of Fanoe PCB * Hot swap variant * Fix review comment issues * Fix review issues * Corrected rules.mk * Change naming to avoid using possibly copyrighted names * Added info.json * Corrected manufacturer name in info.json * Keymap updates * Add layout for use with ws2812b and such * Fixes based on code review	2019-01-25 15:57:15 -08:00
mtei	2e8b32b9b5	move `#include "rgb.h"` from quantum.h to quantum.c I think `quantum.h` should contain only API declarations that `quantum.c` provides externally. `rgb.h` contains function weak definitions. This should not be in `quantum.h`.	2019-01-25 13:38:12 -08:00
fauxpark	79b58937f4	Add C(), A() and G() to match already existing S() (#4673 )	2019-01-25 13:12:48 -08:00
Konstantin Đorđević	2f009d7461	Add MOD_MASK_* macros to core code (#4337 ) * Add MOD_MASK_* macros to core code * MOD_MASK_ALL → MOD_MASK_CSAG	2019-01-25 13:02:38 -08:00
Olivier Poitrey	e611433cb5	rs: code friendly keymap for preonic, iris and my preonic clone (#4303 ) I worked on those keymap to simplify the use of 60% keyboards for coders. Instead of trying to mimic planck, this keymap remove raise/lower layer complexity and keep some important sign keys for coder in the upper right side pretty much the same way as they are on a full keyboard. A karabiner configuration is also provided to mimic most of the keymap features on the macbook internal keyboard for when you are forced to use it.	2019-01-25 12:57:10 -08:00
Drashna Jaelre	3542e573c8	Fix process_combo which assign -1 to uint16_t (#3697 )	2019-01-25 12:11:38 -08:00
Ian O'Dea	6ca52c9d57	Fix indentation in tmk_core led_matrix.c	2019-01-07 10:22:47 -06:00
Ian O'Dea	9f3afae5d1	Make arm_atsam led matrix circular animation circular rather than obloid	2019-01-07 10:20:15 -06:00
Ian O'Dea	d55dc9b816	Add ability to animate arm_atsam led matrix from the center of a circle	2019-01-07 09:36:28 -06:00
Shihpin Tseng	1950a145c7	Fix process_combo which assign -1 to uint16_t	2018-08-20 02:29:08 +08:00
		`@@ -0,0 +1,2 @@`
							`# The default keymap for Lunar`
							`For use without VIA configurator.`
		`@@ -0,0 +1,2 @@`
							`# The VIA keymap for Lunar`
							`This keymap is for compatibility with the VIA configurator.`