Flip definitions of macOS brightness alias

Before:
KC_BRMU - Brightness Down
KC_BRMD - Brightness Up

After:
KC_BRMU - Brightness Up
KC_BRMD - Brightness Down

common_features.mk

@@ -254,20 +254,34 @@ QUANTUM_SRC:= \
     $(QUANTUM_DIR)/keymap_common.c \
     $(QUANTUM_DIR)/keycode_config.c
 
-ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
+# Include the standard or split matrix code if needed
-    ifneq ($(strip $(CUSTOM_MATRIX)), yes)
+ifneq ($(strip $(CUSTOM_MATRIX)), yes)
-       QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
+    ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
-       # Do not use $(QUANTUM_DIR)/matrix.c.
+        QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
-       CUSTOM_MATRIX=yes
+    else
+        QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
     endif
-    OPT_DEFS += -DSPLIT_KEYBOARD
-    QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
-                $(QUANTUM_DIR)/split_common/split_util.c
-    QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/i2c.c
-    QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/serial.c
-    COMMON_VPATH += $(QUANTUM_PATH)/split_common
 endif
 
-ifneq ($(strip $(CUSTOM_MATRIX)), yes)
+# Include the standard debounce code if needed
-    QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
+ifneq ($(strip $(CUSTOM_DEBOUNCE)), yes)
+    QUANTUM_SRC += $(QUANTUM_DIR)/debounce.c
+endif
+
+ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
+    OPT_DEFS += -DSPLIT_KEYBOARD
+
+    # Include files used by all split keyboards
+    QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
+                   $(QUANTUM_DIR)/split_common/split_util.c
+
+    # Determine which (if any) transport files are required
+    ifneq ($(strip $(SPLIT_TRANSPORT)), custom)
+        QUANTUM_SRC += $(QUANTUM_DIR)/split_common/transport.c
+        # Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called.
+        # Unused functions are pruned away, which is why we can add both drivers here without bloat.
+        QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/i2c.c \
+                           $(QUANTUM_DIR)/split_common/serial.c
+    endif
+    COMMON_VPATH += $(QUANTUM_PATH)/split_common
 endif

docs/config_options.md

@@ -197,6 +197,9 @@ If you define these options you will enable the associated feature, which may in
 
 Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
 
+* `SPLIT_TRANSPORT = custom`
+  * Allows replacing the standard split communication routines with a custom one. ARM based split keyboards must use this at present.
+
 ### Setting Handedness
 
 One thing to remember, the side that the USB port is plugged into is always the master half. The side not plugged into USB is the slave.
@@ -302,6 +305,10 @@ Use these to enable or disable building certain features. The more you have enab
   * Current options are AdafruitEzKey, AdafruitBLE, RN42
 * `SPLIT_KEYBOARD`
   * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
+* `CUSTOM_MATRIX`
+  * Allows replacing the standard matrix scanning routine with a custom one.
+* `CUSTOM_DEBOUNCE`
+  * Allows replacing the standard key debouncing routine with a custom one.
 * `WAIT_FOR_USB`
   * Forces the keyboard to wait for a USB connection to be established before it starts up
 * `NO_USB_STARTUP_CHECK`

docs/custom_quantum_functions.md

@@ -90,7 +90,7 @@ keyrecord_t record {
 
 # LED Control
 
-This allows you to control the 5 LED's defined as part of the USB Keyboard spec. It will be called when the state of one of those 5 LEDs changes.
+QMK provides methods to read the 5 LEDs defined as part of the HID spec:
 
 * `USB_LED_NUM_LOCK`
 * `USB_LED_CAPS_LOCK`
@@ -98,31 +98,46 @@ This allows you to control the 5 LED's defined as part of the USB Keyboard spec.
 * `USB_LED_COMPOSE`
 * `USB_LED_KANA`
 
+These five constants correspond to the positional bits of the host LED state.
+There are two ways to get the host LED state:
+
+* by implementing `led_set_user()`
+* by calling `host_keyboard_leds()`
+
+## `led_set_user()`
+
+This function will be called when the state of one of those 5 LEDs changes.
+It receives the LED state as parameter.
+Use the `IS_LED_ON(USB_LED, LED_NAME)` and `IS_LED_OFF(USB_LED, LED_NAME)`
+macros to check the LED status.
+
+!> `host_keyboard_leds()` may already reflect a new value before `led_set_user()` is called.
+
 ### Example `led_set_user()` Implementation
 
 ```c
 void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_NUM_LOCK)) {
+    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
         PORTB |= (1<<0);
     } else {
         PORTB &= ~(1<<0);
     }
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
         PORTB |= (1<<1);
     } else {
         PORTB &= ~(1<<1);
     }
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+    if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
         PORTB |= (1<<2);
     } else {
         PORTB &= ~(1<<2);
     }
-    if (usb_led & (1<<USB_LED_COMPOSE)) {
+    if (IS_LED_ON(usb_led, USB_LED_COMPOSE)) {
         PORTB |= (1<<3);
     } else {
         PORTB &= ~(1<<3);
     }
-    if (usb_led & (1<<USB_LED_KANA)) {
+    if (IS_LED_ON(usb_led, USB_LED_KANA)) {
         PORTB |= (1<<4);
     } else {
         PORTB &= ~(1<<4);
@@ -135,10 +150,33 @@ void led_set_user(uint8_t usb_led) {
 * Keyboard/Revision: `void led_set_kb(uint8_t usb_led)`
 * Keymap: `void led_set_user(uint8_t usb_led)`
 
+## `host_keyboard_leds()`
+
+Call this function to get the last received LED state.
+This is useful for reading the LED state outside `led_set_*`, e.g. in [`matrix_scan_user()`](#matrix-scanning-code).
+
+For convenience, you can use the `IS_HOST_LED_ON(LED_NAME)` and `IS_HOST_LED_OFF(LED_NAME)` macros instead of calling `host_keyboard_leds()` directly.
+
+## Setting physical LED state
+
+Some keyboard implementations provide convenience methods for setting the state of the physical LEDs.
+
+### Ergodox and Ergodox EZ
+
+The Ergodox EZ implementation provides `ergodox_right_led_``1`/`2`/`3_on`/`off()`
+to turn individual LEDs on and off, as well as
+`ergodox_right_led_on`/`off(uint8_t led)`
+to turn them on and off by their number.
+
+In addition, it is possible to specify the brightness level with `ergodox_led_all_set(uint8_t n)`,
+for individual LEDs with `ergodox_right_led_1`/`2`/`3_set(uint8_t n)`
+or by their number using `ergodox_right_led_set(uint8_t led, uint8_t n)`.
+
+It defines `LED_BRIGHTNESS_LO` for the lowest brightness and `LED_BRIGHTNESS_HI` for the highest brightness, which is also the default.
 
 # Matrix Initialization Code
 
-Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LED's or i&#xb2;c controllers you will need to set up that hardware before it can be used.
+Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LEDs or i&#xb2;c controllers you will need to set up that hardware before it can be used.
 
 
 ### Example `matrix_init_user()` Implementation
@@ -176,7 +214,7 @@ This example has been deliberately omitted. You should understand enough about Q
 
 This function gets called at every matrix scan, which is basically as often as the MCU can handle. Be careful what you put here, as it will get run a lot.
 
-You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LED's or a display) or other functionality that you want to trigger regularly even when the user isn't typing.
+You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LEDs or a display) or other functionality that you want to trigger regularly even when the user isn't typing.
 
 
 # Keyboard Idling/Wake Code

docs/feature_advanced_keycodes.md

@@ -25,7 +25,7 @@ These functions allow you to activate layers in various ways. Note that layers a
 
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
-* `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
+* `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers: `MOD_LCTL`, `MOD_LSFT`, `MOD_LALT`, `MOD_LGUI` (note the use of `MOD_` constants instead of `KC_`). These modifiers can be combined using bitwise OR, e.g. `LM(_RAISE, MOD_LCTL | MOD_LALT)`.
 * `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped. Only supports layers 0-15.
 * `OSL(layer)` - momentarily activates *layer* until the next key is pressed. See [One Shot Keys](#one-shot-keys) for details and additional functionality.
 * `TG(layer)` - toggles *layer*, activating it if it's inactive and vice versa

docs/getting_started_make_guide.md

@@ -135,6 +135,18 @@ This enables [key lock](feature_key_lock.md). This consumes an additional 260 by
 
 This enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
 
+`SPLIT_TRANSPORT`
+
+As there is no standard split communication driver for ARM-based split keyboards yet, `SPLIT_TRANSPORT = custom` must be used for these. It will prevent the standard split keyboard communication code (which is AVR-specific) from being included, allowing a custom implementation to be used.
+
+`CUSTOM_MATRIX`
+
+Lets you replace the default matrix scanning routine with your own code. You will need to provide your own implementations of matrix_init() and matrix_scan().
+
+`CUSTOM_DEBOUNCE`
+
+Lets you replace the default key debouncing routine with your own code. You will need to provide your own implementation of debounce().
+
 ## Customizing Makefile Options on a Per-Keymap Basis
 
 If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard.

docs/internals_gpio_control.md

@@ -1,6 +1,6 @@
 # GPIO Control
 
-QMK has a GPIO control abstraction layer which is micro-controller agnostic. This is done to allow easy access to pin control across different platforms.
+QMK has a GPIO control abstraction layer which is microcontroller agnostic. This is done to allow easy access to pin control across different platforms.
 
 ## Functions
 
@@ -17,7 +17,7 @@ The following functions can provide basic control of GPIOs and are found in `qua
 |`writePin(pin, level)`|Set pin level, assuming it is an output                           |
 |`readPin(pin)`        |Returns the level of the pin                                      |
 
-## Advance settings
+## Advanced Settings
 
-Each micro-controller can have multiple advance settings regarding its GPIO. This abstraction layer does not limit the use of architecture specific functions. Advance users should consult the datasheet of there desired device and include any needed libraries. For AVR the standard avr/io.h library is used and for STM32 the Chibios [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
+Each microcontroller can have multiple advanced settings regarding its GPIO. This abstraction layer does not limit the use of architecture-specific functions. Advanced users should consult the datasheet of their desired device and include any needed libraries. For AVR, the standard avr/io.h library is used; for STM32, the ChibiOS [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
 

docs/keycodes.md

@@ -6,205 +6,205 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Basic Keycodes](keycodes_basic.md)
 
-|Key                    |Aliases             |Description                                    |
+|Key                    |Aliases                       |Description                                    |
-|-----------------------|--------------------|-----------------------------------------------|
+|-----------------------|------------------------------|-----------------------------------------------|
-|`KC_NO`                |`XXXXXXX`           |Ignore this key (NOOP)                         |
+|`KC_NO`                |`XXXXXXX`                     |Ignore this key (NOOP)                         |
-|`KC_TRANSPARENT`       |`KC_TRNS`, `_______`|Use the next lowest non-transparent key        |
+|`KC_TRANSPARENT`       |`KC_TRNS`, `_______`          |Use the next lowest non-transparent key        |
-|`KC_A`                 |                    |`a` and `A`                                    |
+|`KC_A`                 |                              |`a` and `A`                                    |
-|`KC_B`                 |                    |`b` and `B`                                    |
+|`KC_B`                 |                              |`b` and `B`                                    |
-|`KC_C`                 |                    |`c` and `C`                                    |
+|`KC_C`                 |                              |`c` and `C`                                    |
-|`KC_D`                 |                    |`d` and `D`                                    |
+|`KC_D`                 |                              |`d` and `D`                                    |
-|`KC_E`                 |                    |`e` and `E`                                    |
+|`KC_E`                 |                              |`e` and `E`                                    |
-|`KC_F`                 |                    |`f` and `F`                                    |
+|`KC_F`                 |                              |`f` and `F`                                    |
-|`KC_G`                 |                    |`g` and `G`                                    |
+|`KC_G`                 |                              |`g` and `G`                                    |
-|`KC_H`                 |                    |`h` and `H`                                    |
+|`KC_H`                 |                              |`h` and `H`                                    |
-|`KC_I`                 |                    |`i` and `I`                                    |
+|`KC_I`                 |                              |`i` and `I`                                    |
-|`KC_J`                 |                    |`j` and `J`                                    |
+|`KC_J`                 |                              |`j` and `J`                                    |
-|`KC_K`                 |                    |`k` and `K`                                    |
+|`KC_K`                 |                              |`k` and `K`                                    |
-|`KC_L`                 |                    |`l` and `L`                                    |
+|`KC_L`                 |                              |`l` and `L`                                    |
-|`KC_M`                 |                    |`m` and `M`                                    |
+|`KC_M`                 |                              |`m` and `M`                                    |
-|`KC_N`                 |                    |`n` and `N`                                    |
+|`KC_N`                 |                              |`n` and `N`                                    |
-|`KC_O`                 |                    |`o` and `O`                                    |
+|`KC_O`                 |                              |`o` and `O`                                    |
-|`KC_P`                 |                    |`p` and `P`                                    |
+|`KC_P`                 |                              |`p` and `P`                                    |
-|`KC_Q`                 |                    |`q` and `Q`                                    |
+|`KC_Q`                 |                              |`q` and `Q`                                    |
-|`KC_R`                 |                    |`r` and `R`                                    |
+|`KC_R`                 |                              |`r` and `R`                                    |
-|`KC_S`                 |                    |`s` and `S`                                    |
+|`KC_S`                 |                              |`s` and `S`                                    |
-|`KC_T`                 |                    |`t` and `T`                                    |
+|`KC_T`                 |                              |`t` and `T`                                    |
-|`KC_U`                 |                    |`u` and `U`                                    |
+|`KC_U`                 |                              |`u` and `U`                                    |
-|`KC_V`                 |                    |`v` and `V`                                    |
+|`KC_V`                 |                              |`v` and `V`                                    |
-|`KC_W`                 |                    |`w` and `W`                                    |
+|`KC_W`                 |                              |`w` and `W`                                    |
-|`KC_X`                 |                    |`x` and `X`                                    |
+|`KC_X`                 |                              |`x` and `X`                                    |
-|`KC_Y`                 |                    |`y` and `Y`                                    |
+|`KC_Y`                 |                              |`y` and `Y`                                    |
-|`KC_Z`                 |                    |`z` and `Z`                                    |
+|`KC_Z`                 |                              |`z` and `Z`                                    |
-|`KC_1`                 |                    |`1` and `!`                                    |
+|`KC_1`                 |                              |`1` and `!`                                    |
-|`KC_2`                 |                    |`2` and `@`                                    |
+|`KC_2`                 |                              |`2` and `@`                                    |
-|`KC_3`                 |                    |`3` and `#`                                    |
+|`KC_3`                 |                              |`3` and `#`                                    |
-|`KC_4`                 |                    |`4` and `$`                                    |
+|`KC_4`                 |                              |`4` and `$`                                    |
-|`KC_5`                 |                    |`5` and `%`                                    |
+|`KC_5`                 |                              |`5` and `%`                                    |
-|`KC_6`                 |                    |`6` and `^`                                    |
+|`KC_6`                 |                              |`6` and `^`                                    |
-|`KC_7`                 |                    |`7` and `&`                                    |
+|`KC_7`                 |                              |`7` and `&`                                    |
-|`KC_8`                 |                    |`8` and `*`                                    |
+|`KC_8`                 |                              |`8` and `*`                                    |
-|`KC_9`                 |                    |`9` and `(`                                    |
+|`KC_9`                 |                              |`9` and `(`                                    |
-|`KC_0`                 |                    |`0` and `)`                                    |
+|`KC_0`                 |                              |`0` and `)`                                    |
-|`KC_ENTER`             |`KC_ENT`            |Return (Enter)                                 |
+|`KC_ENTER`             |`KC_ENT`                      |Return (Enter)                                 |
-|`KC_ESCAPE`            |`KC_ESC`            |Escape                                         |
+|`KC_ESCAPE`            |`KC_ESC`                      |Escape                                         |
-|`KC_BSPACE`            |`KC_BSPC`           |Delete (Backspace)                             |
+|`KC_BSPACE`            |`KC_BSPC`                     |Delete (Backspace)                             |
-|`KC_TAB`               |                    |Tab                                            |
+|`KC_TAB`               |                              |Tab                                            |
-|`KC_SPACE`             |`KC_SPC`            |Spacebar                                       |
+|`KC_SPACE`             |`KC_SPC`                      |Spacebar                                       |
-|`KC_MINUS`             |`KC_MINS`           |`-` and `_`                                    |
+|`KC_MINUS`             |`KC_MINS`                     |`-` and `_`                                    |
-|`KC_EQUAL`             |`KC_EQL`            |`=` and `+`                                    |
+|`KC_EQUAL`             |`KC_EQL`                      |`=` and `+`                                    |
-|`KC_LBRACKET`          |`KC_LBRC`           |`[` and `{`                                    |
+|`KC_LBRACKET`          |`KC_LBRC`                     |`[` and `{`                                    |
-|`KC_RBRACKET`          |`KC_RBRC`           |`]` and `}`                                    |
+|`KC_RBRACKET`          |`KC_RBRC`                     |`]` and `}`                                    |
-|`KC_BSLASH`            |`KC_BSLS`           |`\` and <code>&#124;</code>                    |
+|`KC_BSLASH`            |`KC_BSLS`                     |`\` and <code>&#124;</code>                    |
-|`KC_NONUS_HASH`        |`KC_NUHS`           |Non-US `#` and `~`                             |
+|`KC_NONUS_HASH`        |`KC_NUHS`                     |Non-US `#` and `~`                             |
-|`KC_SCOLON`            |`KC_SCLN`           |`;` and `:`                                    |
+|`KC_SCOLON`            |`KC_SCLN`                     |`;` and `:`                                    |
-|`KC_QUOTE`             |`KC_QUOT`           |`'` and `"`                                    |
+|`KC_QUOTE`             |`KC_QUOT`                     |`'` and `"`                                    |
-|`KC_GRAVE`             |`KC_GRV`, `KC_ZKHK` |<code>&#96;</code> and `~`, JIS Zenkaku/Hankaku|
+|`KC_GRAVE`             |`KC_GRV`, `KC_ZKHK`           |<code>&#96;</code> and `~`, JIS Zenkaku/Hankaku|
-|`KC_COMMA`             |`KC_COMM`           |`,` and `<`                                    |
+|`KC_COMMA`             |`KC_COMM`                     |`,` and `<`                                    |
-|`KC_DOT`               |                    |`.` and `>`                                    |
+|`KC_DOT`               |                              |`.` and `>`                                    |
-|`KC_SLASH`             |`KC_SLSH`           |`/` and `?`                                    |
+|`KC_SLASH`             |`KC_SLSH`                     |`/` and `?`                                    |
-|`KC_CAPSLOCK`          |`KC_CLCK`, `KC_CAPS`|Caps Lock                                      |
+|`KC_CAPSLOCK`          |`KC_CLCK`, `KC_CAPS`          |Caps Lock                                      |
-|`KC_F1`                |                    |F1                                             |
+|`KC_F1`                |                              |F1                                             |
-|`KC_F2`                |                    |F2                                             |
+|`KC_F2`                |                              |F2                                             |
-|`KC_F3`                |                    |F3                                             |
+|`KC_F3`                |                              |F3                                             |
-|`KC_F4`                |                    |F4                                             |
+|`KC_F4`                |                              |F4                                             |
-|`KC_F5`                |                    |F5                                             |
+|`KC_F5`                |                              |F5                                             |
-|`KC_F6`                |                    |F6                                             |
+|`KC_F6`                |                              |F6                                             |
-|`KC_F7`                |                    |F7                                             |
+|`KC_F7`                |                              |F7                                             |
-|`KC_F8`                |                    |F8                                             |
+|`KC_F8`                |                              |F8                                             |
-|`KC_F9`                |                    |F9                                             |
+|`KC_F9`                |                              |F9                                             |
-|`KC_F10`               |                    |F10                                            |
+|`KC_F10`               |                              |F10                                            |
-|`KC_F11`               |                    |F11                                            |
+|`KC_F11`               |                              |F11                                            |
-|`KC_F12`               |                    |F12                                            |
+|`KC_F12`               |                              |F12                                            |
-|`KC_PSCREEN`           |`KC_PSCR`           |Print Screen                                   |
+|`KC_PSCREEN`           |`KC_PSCR`                     |Print Screen                                   |
-|`KC_SCROLLLOCK`        |`KC_SLCK`           |Scroll Lock                                    |
+|`KC_SCROLLLOCK`        |`KC_SLCK`, `KC_BRMD`          |Scroll Lock, Brightness Down (macOS)           |
-|`KC_PAUSE`             |`KC_PAUS`, `KC_BRK` |Pause                                          |
+|`KC_PAUSE`             |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)                   |
-|`KC_INSERT`            |`KC_INS`            |Insert                                         |
+|`KC_INSERT`            |`KC_INS`                      |Insert                                         |
-|`KC_HOME`              |                    |Home                                           |
+|`KC_HOME`              |                              |Home                                           |
-|`KC_PGUP`              |                    |Page Up                                        |
+|`KC_PGUP`              |                              |Page Up                                        |
-|`KC_DELETE`            |`KC_DEL`            |Forward Delete                                 |
+|`KC_DELETE`            |`KC_DEL`                      |Forward Delete                                 |
-|`KC_END`               |                    |End                                            |
+|`KC_END`               |                              |End                                            |
-|`KC_PGDOWN`            |`KC_PGDN`           |Page Down                                      |
+|`KC_PGDOWN`            |`KC_PGDN`                     |Page Down                                      |
-|`KC_RIGHT`             |`KC_RGHT`           |Right Arrow                                    |
+|`KC_RIGHT`             |`KC_RGHT`                     |Right Arrow                                    |
-|`KC_LEFT`              |                    |Left Arrow                                     |
+|`KC_LEFT`              |                              |Left Arrow                                     |
-|`KC_DOWN`              |                    |Down Arrow                                     |
+|`KC_DOWN`              |                              |Down Arrow                                     |
-|`KC_UP`                |                    |Up Arrow                                       |
+|`KC_UP`                |                              |Up Arrow                                       |
-|`KC_NUMLOCK`           |`KC_NLCK`           |Keypad Num Lock and Clear                      |
+|`KC_NUMLOCK`           |`KC_NLCK`                     |Keypad Num Lock and Clear                      |
-|`KC_KP_SLASH`          |`KC_PSLS`           |Keypad `/`                                     |
+|`KC_KP_SLASH`          |`KC_PSLS`                     |Keypad `/`                                     |
-|`KC_KP_ASTERISK`       |`KC_PAST`           |Keypad `*`                                     |
+|`KC_KP_ASTERISK`       |`KC_PAST`                     |Keypad `*`                                     |
-|`KC_KP_MINUS`          |`KC_PMNS`           |Keypad `-`                                     |
+|`KC_KP_MINUS`          |`KC_PMNS`                     |Keypad `-`                                     |
-|`KC_KP_PLUS`           |`KC_PPLS`           |Keypad `+`                                     |
+|`KC_KP_PLUS`           |`KC_PPLS`                     |Keypad `+`                                     |
-|`KC_KP_ENTER`          |`KC_PENT`           |Keypad Enter                                   |
+|`KC_KP_ENTER`          |`KC_PENT`                     |Keypad Enter                                   |
-|`KC_KP_1`              |`KC_P1`             |Keypad `1` and End                             |
+|`KC_KP_1`              |`KC_P1`                       |Keypad `1` and End                             |
-|`KC_KP_2`              |`KC_P2`             |Keypad `2` and Down Arrow                      |
+|`KC_KP_2`              |`KC_P2`                       |Keypad `2` and Down Arrow                      |
-|`KC_KP_3`              |`KC_P3`             |Keypad `3` and Page Down                       |
+|`KC_KP_3`              |`KC_P3`                       |Keypad `3` and Page Down                       |
-|`KC_KP_4`              |`KC_P4`             |Keypad `4` and Left Arrow                      |
+|`KC_KP_4`              |`KC_P4`                       |Keypad `4` and Left Arrow                      |
-|`KC_KP_5`              |`KC_P5`             |Keypad `5`                                     |
+|`KC_KP_5`              |`KC_P5`                       |Keypad `5`                                     |
-|`KC_KP_6`              |`KC_P6`             |Keypad `6` and Right Arrow                     |
+|`KC_KP_6`              |`KC_P6`                       |Keypad `6` and Right Arrow                     |
-|`KC_KP_7`              |`KC_P7`             |Keypad `7` and Home                            |
+|`KC_KP_7`              |`KC_P7`                       |Keypad `7` and Home                            |
-|`KC_KP_8`              |`KC_P8`             |Keypad `8` and Up Arrow                        |
+|`KC_KP_8`              |`KC_P8`                       |Keypad `8` and Up Arrow                        |
-|`KC_KP_9`              |`KC_P9`             |Keypad `9` and Page Up                         |
+|`KC_KP_9`              |`KC_P9`                       |Keypad `9` and Page Up                         |
-|`KC_KP_0`              |`KC_P0`             |Keypad `0` and Insert                          |
+|`KC_KP_0`              |`KC_P0`                       |Keypad `0` and Insert                          |
-|`KC_KP_DOT`            |`KC_PDOT`           |Keypad `.` and Delete                          |
+|`KC_KP_DOT`            |`KC_PDOT`                     |Keypad `.` and Delete                          |
-|`KC_NONUS_BSLASH`      |`KC_NUBS`           |Non-US `\` and <code>&#124;</code>             |
+|`KC_NONUS_BSLASH`      |`KC_NUBS`                     |Non-US `\` and <code>&#124;</code>             |
-|`KC_APPLICATION`       |`KC_APP`            |Application (Windows Menu Key)                 |
+|`KC_APPLICATION`       |`KC_APP`                      |Application (Windows Menu Key)                 |
-|`KC_POWER`             |                    |System Power (macOS)                           |
+|`KC_POWER`             |                              |System Power (macOS)                           |
-|`KC_KP_EQUAL`          |`KC_PEQL`           |Keypad `=`                                     |
+|`KC_KP_EQUAL`          |`KC_PEQL`                     |Keypad `=`                                     |
-|`KC_F13`               |                    |F13                                            |
+|`KC_F13`               |                              |F13                                            |
-|`KC_F14`               |                    |F14                                            |
+|`KC_F14`               |                              |F14                                            |
-|`KC_F15`               |                    |F15                                            |
+|`KC_F15`               |                              |F15                                            |
-|`KC_F16`               |                    |F16                                            |
+|`KC_F16`               |                              |F16                                            |
-|`KC_F17`               |                    |F17                                            |
+|`KC_F17`               |                              |F17                                            |
-|`KC_F18`               |                    |F18                                            |
+|`KC_F18`               |                              |F18                                            |
-|`KC_F19`               |                    |F19                                            |
+|`KC_F19`               |                              |F19                                            |
-|`KC_F20`               |                    |F20                                            |
+|`KC_F20`               |                              |F20                                            |
-|`KC_F21`               |                    |F21                                            |
+|`KC_F21`               |                              |F21                                            |
-|`KC_F22`               |                    |F22                                            |
+|`KC_F22`               |                              |F22                                            |
-|`KC_F23`               |                    |F23                                            |
+|`KC_F23`               |                              |F23                                            |
-|`KC_F24`               |                    |F24                                            |
+|`KC_F24`               |                              |F24                                            |
-|`KC_EXECUTE`           |`KC_EXEC`           |Execute                                        |
+|`KC_EXECUTE`           |`KC_EXEC`                     |Execute                                        |
-|`KC_HELP`              |                    |Help                                           |
+|`KC_HELP`              |                              |Help                                           |
-|`KC_MENU`              |                    |Menu                                           |
+|`KC_MENU`              |                              |Menu                                           |
-|`KC_SELECT`            |`KC_SLCT`           |Select                                         |
+|`KC_SELECT`            |`KC_SLCT`                     |Select                                         |
-|`KC_STOP`              |                    |Stop                                           |
+|`KC_STOP`              |                              |Stop                                           |
-|`KC_AGAIN`             |`KC_AGIN`           |Again                                          |
+|`KC_AGAIN`             |`KC_AGIN`                     |Again                                          |
-|`KC_UNDO`              |                    |Undo                                           |
+|`KC_UNDO`              |                              |Undo                                           |
-|`KC_CUT`               |                    |Cut                                            |
+|`KC_CUT`               |                              |Cut                                            |
-|`KC_COPY`              |                    |Copy                                           |
+|`KC_COPY`              |                              |Copy                                           |
-|`KC_PASTE`             |`KC_PSTE`           |Paste                                          |
+|`KC_PASTE`             |`KC_PSTE`                     |Paste                                          |
-|`KC_FIND`              |                    |Find                                           |
+|`KC_FIND`              |                              |Find                                           |
-|`KC__MUTE`             |                    |Mute (macOS)                                   |
+|`KC__MUTE`             |                              |Mute (macOS)                                   |
-|`KC__VOLUP`            |                    |Volume Up (macOS)                              |
+|`KC__VOLUP`            |                              |Volume Up (macOS)                              |
-|`KC__VOLDOWN`          |                    |Volume Down (macOS)                            |
+|`KC__VOLDOWN`          |                              |Volume Down (macOS)                            |
-|`KC_LOCKING_CAPS`      |`KC_LCAP`           |Locking Caps Lock                              |
+|`KC_LOCKING_CAPS`      |`KC_LCAP`                     |Locking Caps Lock                              |
-|`KC_LOCKING_NUM`       |`KC_LNUM`           |Locking Num Lock                               |
+|`KC_LOCKING_NUM`       |`KC_LNUM`                     |Locking Num Lock                               |
-|`KC_LOCKING_SCROLL`    |`KC_LSCR`           |Locking Scroll Lock                            |
+|`KC_LOCKING_SCROLL`    |`KC_LSCR`                     |Locking Scroll Lock                            |
-|`KC_KP_COMMA`          |`KC_PCMM`           |Keypad `,`                                     |
+|`KC_KP_COMMA`          |`KC_PCMM`                     |Keypad `,`                                     |
-|`KC_KP_EQUAL_AS400`    |                    |Keypad `=` on AS/400 keyboards                 |
+|`KC_KP_EQUAL_AS400`    |                              |Keypad `=` on AS/400 keyboards                 |
-|`KC_INT1`              |`KC_RO`             |JIS `\` and `_`                                |
+|`KC_INT1`              |`KC_RO`                       |JIS `\` and `_`                                |
-|`KC_INT2`              |`KC_KANA`           |JIS Katakana/Hiragana                          |
+|`KC_INT2`              |`KC_KANA`                     |JIS Katakana/Hiragana                          |
-|`KC_INT3`              |`KC_JYEN`           |JIS `¥` and <code>&#124;</code>                |
+|`KC_INT3`              |`KC_JYEN`                     |JIS `¥` and <code>&#124;</code>                |
-|`KC_INT4`              |`KC_HENK`           |JIS Henkan                                     |
+|`KC_INT4`              |`KC_HENK`                     |JIS Henkan                                     |
-|`KC_INT5`              |`KC_MHEN`           |JIS Muhenkan                                   |
+|`KC_INT5`              |`KC_MHEN`                     |JIS Muhenkan                                   |
-|`KC_INT6`              |                    |JIS Numpad `,`                                 |
+|`KC_INT6`              |                              |JIS Numpad `,`                                 |
-|`KC_INT7`              |                    |International 7                                |
+|`KC_INT7`              |                              |International 7                                |
-|`KC_INT8`              |                    |International 8                                |
+|`KC_INT8`              |                              |International 8                                |
-|`KC_INT9`              |                    |International 9                                |
+|`KC_INT9`              |                              |International 9                                |
-|`KC_LANG1`             |`KC_HAEN`           |Hangul/English                                 |
+|`KC_LANG1`             |`KC_HAEN`                     |Hangul/English                                 |
-|`KC_LANG2`             |`KC_HANJ`           |Hanja                                          |
+|`KC_LANG2`             |`KC_HANJ`                     |Hanja                                          |
-|`KC_LANG3`             |                    |JIS Katakana                                   |
+|`KC_LANG3`             |                              |JIS Katakana                                   |
-|`KC_LANG4`             |                    |JIS Hiragana                                   |
+|`KC_LANG4`             |                              |JIS Hiragana                                   |
-|`KC_LANG5`             |                    |JIS Zenkaku/Hankaku                            |
+|`KC_LANG5`             |                              |JIS Zenkaku/Hankaku                            |
-|`KC_LANG6`             |                    |Language 6                                     |
+|`KC_LANG6`             |                              |Language 6                                     |
-|`KC_LANG7`             |                    |Language 7                                     |
+|`KC_LANG7`             |                              |Language 7                                     |
-|`KC_LANG8`             |                    |Language 8                                     |
+|`KC_LANG8`             |                              |Language 8                                     |
-|`KC_LANG9`             |                    |Language 9                                     |
+|`KC_LANG9`             |                              |Language 9                                     |
-|`KC_ALT_ERASE`         |`KC_ERAS`           |Alternate Erase                                |
+|`KC_ALT_ERASE`         |`KC_ERAS`                     |Alternate Erase                                |
-|`KC_SYSREQ`            |                    |SysReq/Attention                               |
+|`KC_SYSREQ`            |                              |SysReq/Attention                               |
-|`KC_CANCEL`            |                    |Cancel                                         |
+|`KC_CANCEL`            |                              |Cancel                                         |
-|`KC_CLEAR`             |`KC_CLR`            |Clear                                          |
+|`KC_CLEAR`             |`KC_CLR`                      |Clear                                          |
-|`KC_PRIOR`             |                    |Prior                                          |
+|`KC_PRIOR`             |                              |Prior                                          |
-|`KC_RETURN`            |                    |Return                                         |
+|`KC_RETURN`            |                              |Return                                         |
-|`KC_SEPARATOR`         |                    |Separator                                      |
+|`KC_SEPARATOR`         |                              |Separator                                      |
-|`KC_OUT`               |                    |Out                                            |
+|`KC_OUT`               |                              |Out                                            |
-|`KC_OPER`              |                    |Oper                                           |
+|`KC_OPER`              |                              |Oper                                           |
-|`KC_CLEAR_AGAIN`       |                    |Clear/Again                                    |
+|`KC_CLEAR_AGAIN`       |                              |Clear/Again                                    |
-|`KC_CRSEL`             |                    |CrSel/Props                                    |
+|`KC_CRSEL`             |                              |CrSel/Props                                    |
-|`KC_EXSEL`             |                    |ExSel                                          |
+|`KC_EXSEL`             |                              |ExSel                                          |
-|`KC_LCTRL`             |`KC_LCTL`           |Left Control                                   |
+|`KC_LCTRL`             |`KC_LCTL`                     |Left Control                                   |
-|`KC_LSHIFT`            |`KC_LSFT`           |Left Shift                                     |
+|`KC_LSHIFT`            |`KC_LSFT`                     |Left Shift                                     |
-|`KC_LALT`              |                    |Left Alt                                       |
+|`KC_LALT`              |                              |Left Alt                                       |
-|`KC_LGUI`              |`KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key)            |
+|`KC_LGUI`              |`KC_LCMD`, `KC_LWIN`          |Left GUI (Windows/Command/Meta key)            |
-|`KC_RCTRL`             |`KC_RCTL`           |Right Control                                  |
+|`KC_RCTRL`             |`KC_RCTL`                     |Right Control                                  |
-|`KC_RSHIFT`            |`KC_RSFT`           |Right Shift                                    |
+|`KC_RSHIFT`            |`KC_RSFT`                     |Right Shift                                    |
-|`KC_RALT`              |`KC_ALGR`           |Right Alt (AltGr)                              |
+|`KC_RALT`              |`KC_ALGR`                     |Right Alt (AltGr)                              |
-|`KC_RGUI`              |`KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key)           |
+|`KC_RGUI`              |`KC_RCMD`, `KC_RWIN`          |Right GUI (Windows/Command/Meta key)           |
-|`KC_SYSTEM_POWER`      |`KC_PWR`            |System Power Down                              |
+|`KC_SYSTEM_POWER`      |`KC_PWR`                      |System Power Down                              |
-|`KC_SYSTEM_SLEEP`      |`KC_SLEP`           |System Sleep                                   |
+|`KC_SYSTEM_SLEEP`      |`KC_SLEP`                     |System Sleep                                   |
-|`KC_SYSTEM_WAKE`       |`KC_WAKE`           |System Wake                                    |
+|`KC_SYSTEM_WAKE`       |`KC_WAKE`                     |System Wake                                    |
-|`KC_AUDIO_MUTE`        |`KC_MUTE`           |Mute                                           |
+|`KC_AUDIO_MUTE`        |`KC_MUTE`                     |Mute                                           |
-|`KC_AUDIO_VOL_UP`      |`KC_VOLU`           |Volume Up                                      |
+|`KC_AUDIO_VOL_UP`      |`KC_VOLU`                     |Volume Up                                      |
-|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`           |Volume Down                                    |
+|`KC_AUDIO_VOL_DOWN`    |`KC_VOLD`                     |Volume Down                                    |
-|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`           |Next Track (Windows)                           |
+|`KC_MEDIA_NEXT_TRACK`  |`KC_MNXT`                     |Next Track (Windows)                           |
-|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`           |Previous Track (Windows)                       |
+|`KC_MEDIA_PREV_TRACK`  |`KC_MPRV`                     |Previous Track (Windows)                       |
-|`KC_MEDIA_STOP`        |`KC_MSTP`           |Stop Track (Windows)                           |
+|`KC_MEDIA_STOP`        |`KC_MSTP`                     |Stop Track (Windows)                           |
-|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`           |Play/Pause Track                               |
+|`KC_MEDIA_PLAY_PAUSE`  |`KC_MPLY`                     |Play/Pause Track                               |
-|`KC_MEDIA_SELECT`      |`KC_MSEL`           |Launch Media Player (Windows)                  |
+|`KC_MEDIA_SELECT`      |`KC_MSEL`                     |Launch Media Player (Windows)                  |
-|`KC_MEDIA_EJECT`       |`KC_EJCT`           |Eject (macOS)                                  |
+|`KC_MEDIA_EJECT`       |`KC_EJCT`                     |Eject (macOS)                                  |
-|`KC_MAIL`              |                    |Launch Mail (Windows)                          |
+|`KC_MAIL`              |                              |Launch Mail (Windows)                          |
-|`KC_CALCULATOR`        |`KC_CALC`           |Launch Calculator (Windows)                    |
+|`KC_CALCULATOR`        |`KC_CALC`                     |Launch Calculator (Windows)                    |
-|`KC_MY_COMPUTER`       |`KC_MYCM`           |Launch My Computer (Windows)                   |
+|`KC_MY_COMPUTER`       |`KC_MYCM`                     |Launch My Computer (Windows)                   |
-|`KC_WWW_SEARCH`        |`KC_WSCH`           |Browser Search (Windows)                       |
+|`KC_WWW_SEARCH`        |`KC_WSCH`                     |Browser Search (Windows)                       |
-|`KC_WWW_HOME`          |`KC_WHOM`           |Browser Home (Windows)                         |
+|`KC_WWW_HOME`          |`KC_WHOM`                     |Browser Home (Windows)                         |
-|`KC_WWW_BACK`          |`KC_WBAK`           |Browser Back (Windows)                         |
+|`KC_WWW_BACK`          |`KC_WBAK`                     |Browser Back (Windows)                         |
-|`KC_WWW_FORWARD`       |`KC_WFWD`           |Browser Forward (Windows)                      |
+|`KC_WWW_FORWARD`       |`KC_WFWD`                     |Browser Forward (Windows)                      |
-|`KC_WWW_STOP`          |`KC_WSTP`           |Browser Stop (Windows)                         |
+|`KC_WWW_STOP`          |`KC_WSTP`                     |Browser Stop (Windows)                         |
-|`KC_WWW_REFRESH`       |`KC_WREF`           |Browser Refresh (Windows)                      |
+|`KC_WWW_REFRESH`       |`KC_WREF`                     |Browser Refresh (Windows)                      |
-|`KC_WWW_FAVORITES`     |`KC_WFAV`           |Browser Favorites (Windows)                    |
+|`KC_WWW_FAVORITES`     |`KC_WFAV`                     |Browser Favorites (Windows)                    |
-|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`           |Next Track (macOS)                             |
+|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD`                     |Next Track (macOS)                             |
-|`KC_MEDIA_REWIND`      |`KC_MRWD`           |Previous Track (macOS)                         |
+|`KC_MEDIA_REWIND`      |`KC_MRWD`                     |Previous Track (macOS)                         |
-|`KC_BRIGHTNESS_UP`     |`KC_BRIU`           |Brightness Up                                  |
+|`KC_BRIGHTNESS_UP`     |`KC_BRIU`                     |Brightness Up                                  |
-|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`           |Brightness Down                                |
+|`KC_BRIGHTNESS_DOWN`   |`KC_BRID`                     |Brightness Down                                |
 
 ## [Quantum Keycodes](quantum_keycodes.md#qmk-keycodes)
 
@@ -238,8 +238,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`MU_TOG`        |         |Toggles Music Mode                |
 |`MU_MOD`        |         |Cycles through the music modes    |
 
-
-
 ## [Backlighting](feature_backlight.md)
 
 |Key      |Description                               |
@@ -285,7 +283,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`OUT_USB` |USB only                                      |
 |`OUT_BT`  |Bluetooth only                                |
 
-
 ## [Layer Switching](feature_advanced_keycodes.md#switching-and-toggling-layers)
 
 |Key             |Description                                                                       |
@@ -439,7 +436,6 @@ This is a reference only. Each group of keys links to the page documenting their
 |`OSM(mod)`  |Hold `mod` for one keypress       |
 |`OSL(layer)`|Switch to `layer` for one keypress|
 
-
 ## [Swap Hands](feature_swap_hands.md)
 
 |Key        |Description                                                              |

docs/keycodes_basic.md

@@ -97,14 +97,14 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 ## Lock Keys
 
-|Key                |Aliases             |Description              |
+|Key                |Aliases             |Description                         |
-|-------------------|--------------------|-------------------------|
+|-------------------|--------------------|------------------------------------|
-|`KC_CAPSLOCK`      |`KC_CLCK`, `KC_CAPS`|Caps Lock                |
+|`KC_CAPSLOCK`      |`KC_CLCK`, `KC_CAPS`|Caps Lock                           |
-|`KC_SCROLLLOCK`    |`KC_SLCK`           |Scroll Lock              |
+|`KC_SCROLLLOCK`    |`KC_SLCK`, `KC_BRMD`|Scroll Lock, Brightness Down (macOS)|
-|`KC_NUMLOCK`       |`KC_NLCK`           |Keypad Num Lock and Clear|
+|`KC_NUMLOCK`       |`KC_NLCK`           |Keypad Num Lock and Clear           |
-|`KC_LOCKING_CAPS`  |`KC_LCAP`           |Locking Caps Lock        |
+|`KC_LOCKING_CAPS`  |`KC_LCAP`           |Locking Caps Lock                   |
-|`KC_LOCKING_NUM`   |`KC_LNUM`           |Locking Num Lock         |
+|`KC_LOCKING_NUM`   |`KC_LNUM`           |Locking Num Lock                    |
-|`KC_LOCKING_SCROLL`|`KC_LSCR`           |Locking Scroll Lock      |
+|`KC_LOCKING_SCROLL`|`KC_LSCR`           |Locking Scroll Lock                 |
 
 ## Modifiers
 
@@ -144,48 +144,48 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
 
 ## Commands
 
-|Key               |Aliases            |Description                   |
+|Key               |Aliases                       |Description                   |
-|------------------|-------------------|------------------------------|
+|------------------|------------------------------|------------------------------|
-|`KC_PSCREEN`      |`KC_PSCR`          |Print Screen                  |
+|`KC_PSCREEN`      |`KC_PSCR`                     |Print Screen                  |
-|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`|Pause                         |
+|`KC_PAUSE`        |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS)  |
-|`KC_INSERT`       |`KC_INS`           |Insert                        |
+|`KC_INSERT`       |`KC_INS`                      |Insert                        |
-|`KC_HOME`         |                   |Home                          |
+|`KC_HOME`         |                              |Home                          |
-|`KC_PGUP`         |                   |Page Up                       |
+|`KC_PGUP`         |                              |Page Up                       |
-|`KC_DELETE`       |`KC_DEL`           |Forward Delete                |
+|`KC_DELETE`       |`KC_DEL`                      |Forward Delete                |
-|`KC_END`          |                   |End                           |
+|`KC_END`          |                              |End                           |
-|`KC_PGDOWN`       |`KC_PGDN`          |Page Down                     |
+|`KC_PGDOWN`       |`KC_PGDN`                     |Page Down                     |
-|`KC_RIGHT`        |`KC_RGHT`          |Right Arrow                   |
+|`KC_RIGHT`        |`KC_RGHT`                     |Right Arrow                   |
-|`KC_LEFT`         |                   |Left Arrow                    |
+|`KC_LEFT`         |                              |Left Arrow                    |
-|`KC_DOWN`         |                   |Down Arrow                    |
+|`KC_DOWN`         |                              |Down Arrow                    |
-|`KC_UP`           |                   |Up Arrow                      |
+|`KC_UP`           |                              |Up Arrow                      |
-|`KC_APPLICATION`  |`KC_APP`           |Application (Windows Menu Key)|
+|`KC_APPLICATION`  |`KC_APP`                      |Application (Windows Menu Key)|
-|`KC_POWER`        |                   |System Power (macOS/Linux)    |
+|`KC_POWER`        |                              |System Power (macOS/Linux)    |
-|`KC_EXECUTE`      |`KC_EXEC`          |Execute                       |
+|`KC_EXECUTE`      |`KC_EXEC`                     |Execute                       |
-|`KC_HELP`         |                   |Help                          |
+|`KC_HELP`         |                              |Help                          |
-|`KC_MENU`         |                   |Menu                          |
+|`KC_MENU`         |                              |Menu                          |
-|`KC_SELECT`       |`KC_SLCT`          |Select                        |
+|`KC_SELECT`       |`KC_SLCT`                     |Select                        |
-|`KC_STOP`         |                   |Stop                          |
+|`KC_STOP`         |                              |Stop                          |
-|`KC_AGAIN`        |`KC_AGIN`          |Again                         |
+|`KC_AGAIN`        |`KC_AGIN`                     |Again                         |
-|`KC_UNDO`         |                   |Undo                          |
+|`KC_UNDO`         |                              |Undo                          |
-|`KC_CUT`          |                   |Cut                           |
+|`KC_CUT`          |                              |Cut                           |
-|`KC_COPY`         |                   |Copy                          |
+|`KC_COPY`         |                              |Copy                          |
-|`KC_PASTE`        |`KC_PSTE`          |Paste                         |
+|`KC_PASTE`        |`KC_PSTE`                     |Paste                         |
-|`KC_FIND`         |                   |Find                          |
+|`KC_FIND`         |                              |Find                          |
-|`KC__MUTE`        |                   |Mute (macOS)                  |
+|`KC__MUTE`        |                              |Mute (macOS)                  |
-|`KC__VOLUP`       |                   |Volume Up (macOS)             |
+|`KC__VOLUP`       |                              |Volume Up (macOS)             |
-|`KC__VOLDOWN`     |                   |Volume Down (macOS)           |
+|`KC__VOLDOWN`     |                              |Volume Down (macOS)           |
-|`KC_ALT_ERASE`    |`KC_ERAS`          |Alternate Erase               |
+|`KC_ALT_ERASE`    |`KC_ERAS`                     |Alternate Erase               |
-|`KC_SYSREQ`       |                   |SysReq/Attention              |
+|`KC_SYSREQ`       |                              |SysReq/Attention              |
-|`KC_CANCEL`       |                   |Cancel                        |
+|`KC_CANCEL`       |                              |Cancel                        |
-|`KC_CLEAR`        |`KC_CLR`           |Clear                         |
+|`KC_CLEAR`        |`KC_CLR`                      |Clear                         |
-|`KC_PRIOR`        |                   |Prior                         |
+|`KC_PRIOR`        |                              |Prior                         |
-|`KC_RETURN`       |                   |Return                        |
+|`KC_RETURN`       |                              |Return                        |
-|`KC_SEPARATOR`    |                   |Separator                     |
+|`KC_SEPARATOR`    |                              |Separator                     |
-|`KC_OUT`          |                   |Out                           |
+|`KC_OUT`          |                              |Out                           |
-|`KC_OPER`         |                   |Oper                          |
+|`KC_OPER`         |                              |Oper                          |
-|`KC_CLEAR_AGAIN`  |                   |Clear/Again                   |
+|`KC_CLEAR_AGAIN`  |                              |Clear/Again                   |
-|`KC_CRSEL`        |                   |CrSel/Props                   |
+|`KC_CRSEL`        |                              |CrSel/Props                   |
-|`KC_EXSEL`        |                   |ExSel                         |
+|`KC_EXSEL`        |                              |ExSel                         |
 
 ## Media Keys
 

keyboards/40percentclub/luddite/info.json

@@ -1,12 +1,74 @@
 {
-    "keyboard_name": "foobar",
+  "keyboard_name": "Luddite",
-    "url": "",
+  "url": "",
-    "maintainer": "qmk",
+  "maintainer": "qmk",
-    "width": 15,
+  "width": 15,
-    "height": 5,
+  "height": 5,
-    "layouts": {
+  "layouts": {
-      "LAYOUT_60_ansi": {
+    "LAYOUT_60_ansi": {
-          "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+      "layout": [
-      }
+        {"label":"`", "x":0, "y":0},
+        {"label":"1", "x":1, "y":0},
+        {"label":"2", "x":2, "y":0},
+        {"label":"3", "x":3, "y":0},
+        {"label":"4", "x":4, "y":0},
+        {"label":"5", "x":5, "y":0},
+        {"label":"6", "x":6, "y":0},
+        {"label":"7", "x":7, "y":0},
+        {"label":"8", "x":8, "y":0},
+        {"label":"9", "x":9, "y":0},
+        {"label":"0", "x":10, "y":0},
+        {"label":"-", "x":11, "y":0},
+        {"label":"=", "x":12, "y":0},
+        {"label":"Backspace", "x":13, "y":0, "w":2},
+        {"label":"Tab", "x":0, "y":1, "w":1.5},
+        {"label":"Q", "x":1.5, "y":1},
+        {"label":"W", "x":2.5, "y":1},
+        {"label":"E", "x":3.5, "y":1},
+        {"label":"R", "x":4.5, "y":1},
+        {"label":"T", "x":5.5, "y":1},
+        {"label":"Y", "x":6.5, "y":1},
+        {"label":"U", "x":7.5, "y":1},
+        {"label":"I", "x":8.5, "y":1},
+        {"label":"O", "x":9.5, "y":1},
+        {"label":"P", "x":10.5, "y":1},
+        {"label":"[", "x":11.5, "y":1},
+        {"label":"]", "x":12.5, "y":1},
+        {"label":"\\", "x":13.5, "y":1, "w":1.5},
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+        {"label":"A", "x":1.75, "y":2},
+        {"label":"S", "x":2.75, "y":2},
+        {"label":"D", "x":3.75, "y":2},
+        {"label":"F", "x":4.75, "y":2},
+        {"label":"G", "x":5.75, "y":2},
+        {"label":"H", "x":6.75, "y":2},
+        {"label":"J", "x":7.75, "y":2},
+        {"label":"K", "x":8.75, "y":2},
+        {"label":"L", "x":9.75, "y":2},
+        {"label":";", "x":10.75, "y":2},
+        {"label":"'", "x":11.75, "y":2},
+        {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+        {"label":"Shift", "x":0, "y":3, "w":2.25},
+        {"label":"Z", "x":2.25, "y":3},
+        {"label":"X", "x":3.25, "y":3},
+        {"label":"C", "x":4.25, "y":3},
+        {"label":"V", "x":5.25, "y":3},
+        {"label":"B", "x":6.25, "y":3},
+        {"label":"N", "x":7.25, "y":3},
+        {"label":"M", "x":8.25, "y":3},
+        {"label":",", "x":9.25, "y":3},
+        {"label":".", "x":10.25, "y":3},
+        {"label":"/", "x":11.25, "y":3},
+        {"label":"Shift", "x":12.25, "y":3, "w":2.75},
+        {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+        {"label":"GUI", "x":1.25, "y":4, "w":1.25},
+        {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+        {"label":"Space", "x":3.75, "y":4, "w":6.25},
+        {"label":"Alt", "x":10, "y":4, "w":1.25},
+        {"label":"GUI", "x":11.25, "y":4, "w":1.25},
+        {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+        {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}
+      ]
     }
+  }
 }

keyboards/bthlabs/geekpad/config.h

@@ -0,0 +1,227 @@
+/*
+Copyright 2019-present Tomek Wójcik <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x4257
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    BTHLabs
+#define PRODUCT         GeekPad
+#define DESCRIPTION     3x3 custom macro pad
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F4, F5, F6 }
+#define MATRIX_COL_PINS { D4, D0, D1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+// #define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+// #define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/bthlabs/geekpad/geekpad.c

@@ -0,0 +1,43 @@
+/* Copyright 2019-present Tomek Wójcik <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "geekpad.h"
+
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+
+    matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+    // put your looping keyboard code here
+    // runs every cycle (a lot)
+
+    matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+    // put your per-action keyboard code here
+    // runs for every action, just before processing by the firmware
+
+    return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+    led_set_user(usb_led);
+}

keyboards/bthlabs/geekpad/geekpad.h

@@ -0,0 +1,40 @@
+/* Copyright 2019-present Tomek Wójcik <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef GEEKPAD_H
+#define GEEKPAD_H
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, \
+    K10, K11, K12, \
+    K20, K21, K22  \
+) \
+{ \
+    { K00,   K01,   K02 }, \
+    { K10,   K11,   K12 }, \
+    { K20,   K21,   K22 }  \
+}
+
+#endif

keyboards/bthlabs/geekpad/info.json

@@ -0,0 +1,22 @@
+{
+  "keyboard_name": "BTHLabs GeekPad",
+  "url": "https://git.bthlabs.pl/tomekwojcik/geekpad",
+  "maintainer": "Tomek Wójcik <[email protected]>",
+  "width": 3,
+  "height": 3,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [
+        {"x": 0, "y": 0},
+        {"x": 1, "y": 0},
+        {"x": 2,"y": 0},
+        {"x": 0, "y": 1},
+        {"x": 1, "y": 1},
+        {"x": 2,"y": 1},
+        {"x": 0, "y": 2},
+        {"x": 1, "y": 2},
+        {"x": 2,"y": 2}
+      ]
+    }
+  }
+}

keyboards/bthlabs/geekpad/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2019-present Tomek Wójcik <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/bthlabs/geekpad/keymaps/default/keymap.c

@@ -0,0 +1,24 @@
+/* Copyright 2019-present Tomek Wójcik <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT( /* Base */
+    KC_F1, KC_F2, KC_F3,
+    KC_MEDIA_REWIND, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_FAST_FORWARD,
+    KC_AUDIO_MUTE, KC_AUDIO_VOL_DOWN, KC_AUDIO_VOL_UP
+  ),
+};

keyboards/bthlabs/geekpad/readme.md

@@ -0,0 +1,15 @@
+# BTHLabs GeekPad
+
+![GeekPad](https://i.imgur.com/FEzO81l.jpg)
+
+A 3x3 custom macro pad designed and developed by Tomek Wójcik.
+
+Keyboard Maintainer: [Tomek Wójcik](https://www.bthlabs.pl/)  
+Hardware Supported: GeekPad Custom PCB  
+Hardware Availability: [Project Repository](https://git.bthlabs.pl/tomekwojcik/geekpad)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bthlabs/geekpad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bthlabs/geekpad/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/ckeys/handwire_101/config.h

@@ -0,0 +1,197 @@
+/*
+Copyright 2012 Jun Wako <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    ckeys_handwire
+#define PRODUCT         ckeys_handwire
+#define DESCRIPTION     4x4 handwire workshop board
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { D4, C6, D7, E6 }
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+//#define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+//#define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+// Audio Click
+#define AUDIO_CLICKY
+
+// Music Mode Polyphony
+// NOTE: Must change polyphony_rate to a number higher than 0 in voices.c
+#define AUDIO_VOICES
+#define PITCH_STANDARD_A 880.0f
+
+// Mouse keys
+#define MOUSEKEY_DELAY          0
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_MAX_SPEED      2
+#define MOUSEKEY_TIME_TO_MAX    5
+#define MOUSEKEY_WHEEL_DELAY    0
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+

keyboards/ckeys/handwire_101/handwire_101.c

@@ -0,0 +1,28 @@
+#include "handwire_101.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	// Turn status LED on
+	//DDRD |= (1<<6);
+	//PORTD |= (1<<6);
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+	led_set_user(usb_led);
+}

keyboards/ckeys/handwire_101/handwire_101.h

@@ -0,0 +1,21 @@
+#pragma once
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22, k23, \
+    k30, k31, k32, k33 \
+) \
+{ \
+    { k00, k01, k02, k03 }, \
+    { k10, k11, k12, k13 }, \
+    { k20, k21, k22, k23 }, \
+    { k30, k31, k32, k33 } \
+}
+

keyboards/ckeys/handwire_101/info.json

@@ -0,0 +1,13 @@
+{
+  "keyboard_name": "cKeys Handwire 101",
+  "url": "https://ckeys.org/slides/handwire/",
+  "maintainer": "brandenbyers",
+  "width": 4,
+  "height": 4,
+  "layouts": {
+    "LAYOUT_ortho_4x4": {
+      "key_count": 16,
+      "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}]
+    }
+  }
+}

keyboards/ckeys/handwire_101/keymaps/default/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+// Add overrides here 

keyboards/ckeys/handwire_101/keymaps/default/keymap.c

@@ -0,0 +1,178 @@
+#include QMK_KEYBOARD_H
+
+enum layers {
+  _BASE,                // base layer
+  _LAYERS,              // layer of all layers
+  _MUSIC,               // music mode
+  _MUSIC_4_LIFE,        // music mode until unplugged
+  _MOUSE,               // mousekeys
+  _TERMINAL,            // terminal
+  _ADMIN                // admin duties
+};
+
+enum custom_keycodes {
+  TERM_ABOUT = SAFE_RANGE,
+  TERM_PRINT,
+  TERM_FLUSH,
+  TERM_HELP,
+  CKEYS_ABOUT,
+};
+
+extern keymap_config_t keymap_config;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* BASE (numpad)
+   * ,-----------------------.
+   * |  7  |  8  |  9  |  /  | <-- Hold for LAYERS
+   * |-----+-----+-----+-----|
+   * |  4  |  5  |  6  |  *  |
+   * |-----+-----+-----+-----|
+   * |  1  |  2  |  3  |  -  |
+   * |-----+-----+-----+-----|
+   * |  0  |  .  |  =  |  +  |
+   * `---------------------- '
+   */
+  [_BASE] = LAYOUT(
+    KC_KP_7, KC_KP_8, KC_KP_9, LT(MO(_LAYERS), KC_PSLS), \
+    KC_KP_4, KC_KP_5, KC_KP_6, KC_PAST,                  \
+    KC_KP_1, KC_KP_2, KC_KP_3, KC_PMNS,                  \
+    KC_KP_0, KC_KP_DOT, KC_KP_EQUAL, KC_PPLS \
+  ),
+    /* LAYERS
+   * ,---------------------------.
+   * |  MUSIC  |     |     |  X  |
+   * |---------+-----+-----+-----|
+   * |  MOUSE  |     |     |     |
+   * |---------+-----+-----+-----|
+   * |TERMINAL |     |     |     |
+   * |---------+-----+-----+-----|
+   * |  ADMIN  |     |     |     |
+   * `---------------------------'
+   */
+  [_LAYERS] = LAYOUT(
+    TG(_MUSIC),    _______, _______, _______, \
+    TG(_MOUSE),    _______, _______, _______, \
+    TG(_TERMINAL), _______, _______, _______, \
+    TG(_ADMIN),    _______, _______, _______\
+  ),
+    /* MUSIC
+   * ,-----------------------.
+   * |  X  |     |     |  X  |
+   * |-----+-----+-----+-----|
+   * |     |     |     |4EVER|
+   * |-----+-----+-----+-----|
+   * | OFF |     |     |     |
+   * |-----+-----+-----+-----|
+   * |  ON |     |     |MODES|
+   * `---------------------- '
+   */
+  // TODO: Make this music layer the one to jump to other music layers (different octaves)
+  [_MUSIC] = LAYOUT(
+    _______,  _______, _______, _______,             \
+    _______,  _______, _______, TG(_MUSIC_4_LIFE), \
+    MU_OFF,   _______, _______, _______,             \
+    MU_ON,    _______, _______, MU_MOD \
+  ),
+    /* MUSIC_4_LIFE
+   * ,-----------------------.
+   * |  ♫  |  ♫  |  ♫  |  ♫  |
+   * |-----+-----+-----+-----|
+   * |  ♫  |  ♫  |  ♫  |  ♫  |
+   * |-----+-----+-----+-----|
+   * |  ♫  |  ♫  |  ♫  |  ♫  |
+   * |-----+-----+-----+-----|
+   * |  ♫  |  ♫  |  ♫  |  ♫  |
+   * `---------------------- '
+   */
+  [_MUSIC_4_LIFE] = LAYOUT(
+    KC_M, KC_M, KC_M, KC_M, \
+    KC_M, KC_M, KC_M, KC_M, \
+    KC_M, KC_M, KC_M, KC_M, \
+    KC_M, KC_M, KC_M, KC_M \
+  ),
+    /* MOUSE
+   * ,-------------------------------------------------.
+   * |  BUTTON 5 |           | SCROLL UP  |     X      |
+   * |-----------+-----------+------------+------------|
+   * |     X     |LEFT CLICK |     UP     |RIGHT CLICK |
+   * |-----------+-----------+------------+------------|
+   * |  BUTTON 4 |   LEFT    |    DOWN    |   RIGHT    |
+   * |-----------+-----------+------------+------=-----|
+   * |  BUTTON 3 |SCROLL LEFT|SCROLL DOWN |SCROLL RIGHT|
+   * `-------------------------------------------------'
+   */
+  [_MOUSE] = LAYOUT(
+    KC_MS_BTN5, _______,       KC_MS_WH_UP,   _______,         \
+    _______,    KC_MS_BTN1,    KC_MS_UP,      KC_MS_BTN2,    \
+    KC_MS_BTN4, KC_MS_LEFT,    KC_MS_DOWN,    KC_MS_RIGHT,   \
+    KC_MS_BTN3, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT \
+  ),
+    /* TERMINAL
+   * ,---------------------------------------.
+   * |            |ABOUT|          |    X    |
+   * |------------+-----+----------+---------|
+   * |TERMINAL OFF|PRINT|          |         |
+   * |------------+-----+----------+---------|
+   * |     X      |FLUSH|          |         |
+   * |------------+-----+----------+---------|
+   * |TERMINAL ON |HELP |          |         |
+   * `--------=======------------------------'
+   */
+  [_TERMINAL] = LAYOUT(
+    _______,    TERM_ABOUT, _______, _______, \
+    TERM_OFF,   TERM_PRINT, _______, _______, \
+    _______,    TERM_FLUSH, _______, _______, \
+    TERM_ON,    TERM_HELP , _______, _______\
+  ),
+    /* ADMIN
+   * ,-----------------------------------------.
+   * |   RESET    |     |           |    X     |
+   * |------------+-----+-----------+----------|
+   * |ABOUT CKEYS |     |           |          |
+   * |------------+-----+-----------+----------|
+   * |            |     |CLICKY UP  |CLICKY OFF|
+   * |------------+-----+-----------+----------|
+   * |     X      |     |CLICKY DOWN|CLICKY ON |
+   * `-----------------------------------------'
+   */
+  [_ADMIN] = LAYOUT(
+    RESET,       _______, _______, _______,  \
+    CKEYS_ABOUT, _______, _______, _______,  \
+    _______,     _______, _______, CK_OFF, \
+    _______,     _______, _______, CK_ON \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case TERM_ABOUT:
+      if (record->event.pressed) {
+        // when keycode TERM_ABOUT is pressed
+        SEND_STRING("about"SS_TAP(X_ENTER));
+      } else {
+        // when keycode TERM_ABOUT is released
+      }
+      break;
+    case TERM_PRINT:
+      if (record->event.pressed) {
+        SEND_STRING("print"SS_TAP(X_ENTER));
+      } else { }
+      break;
+    case TERM_FLUSH:
+      if (record->event.pressed) {
+        SEND_STRING("flush"SS_TAP(X_ENTER));
+      } else { }
+      break;
+    case TERM_HELP:
+      if (record->event.pressed) {
+        SEND_STRING("help"SS_TAP(X_ENTER));
+      } else { }
+      break;
+    case CKEYS_ABOUT:
+      if (record->event.pressed) {
+        SEND_STRING("https://cKeys.org"SS_TAP(X_ENTER)"Making people smile one keyboard at a time."SS_TAP(X_ENTER)"cKeys is a volunteer-run 501(c)(3) nonprofit organization."SS_TAP(X_ENTER));
+      } else { }
+      break;
+  }
+  return true;
+};

keyboards/ckeys/handwire_101/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for the cKeys Handwire 101 4x4 keyboard.

keyboards/ckeys/handwire_101/readme.md

@@ -0,0 +1,163 @@
+# cKeys Handwire 101 Workshop
+
+![](https://ckeys.org/images/proton-c-handwire-1.jpg)
+
+## Slides
+
+Slides can be found at: https://ckeys.org/slides/handwire/
+
+## Case Design
+
+The laser cutting file is ideal for Ponoko's P1 board size.
+
+## Firmware
+
+If you want to reflash the pre-installed firmware, use the `.bin` file for Proton C and the `.hex` file for Pro Micro builds. Flash with the QMK Toolbox or via the command line.
+
+Building for Proton C: `make ckeys/handwire_101:default CTPC=yes`
+Building for Pro Micro: `make ckeys/handwire_101:default`
+
+Pre-built firmware files (and laser cutting case files) can be found here: https://github.com/c-keys/handwire
+
+## Default Layout
+
+You can find the default layout in `qmk-handwire/keymaps/default/keymap.c`
+
+### Layers
+
+When you plug in your keyboard, it will function as a numpad. You will remain in the `Base` numpad layer unless you hold down the top right corner key and select one of the keys in the left most column. In QMK, this is called a momentary switch and looks like `MO(LAYERS)` in the default `keymap.c`. You can read more about layer switching in the [QMK Documentation](https://beta.docs.qmk.fm/features/feature_advanced_keycodes#switching-and-toggling-layers).
+
+#### Base
+```
+    /* BASE (numpad)
+   * ,-----------------------.
+   * |  7  |  8  |  9  |  /  | <-- Hold for LAYERS
+   * |-----+-----+-----+-----|
+   * |  4  |  5  |  6  |  *  |
+   * |-----+-----+-----+-----|
+   * |  1  |  2  |  3  |  -  |
+   * |-----+-----+-----+-----|
+   * |  0  |  .  |  =  |  +  |
+   * `---------------------- '
+   */
+```
+
+#### Layers
+
+```
+    /* LAYERS
+   * ,---------------------------.
+   * |  MUSIC  |     |     |  X  |
+   * |---------+-----+-----+-----|
+   * |  MOUSE  |     |     |     |
+   * |---------+-----+-----+-----|
+   * |TERMINAL |     |     |     |
+   * |---------+-----+-----+-----|
+   * |  ADMIN  |     |     |     |
+   * `---------------------------'
+   */
+```
+
+This is the layers layer. This is how you toggle other layers on and off. If you toggle on a layer, it is important that you re-toggle that layer offbefore switching to a new layer.
+
+#### Music
+
+```
+    /* MUSIC
+   * ,-----------------------.
+   * |  X  |     |     |  X  |
+   * |-----+-----+-----+-----|
+   * |     |     |     |4EVER|
+   * |-----+-----+-----+-----|
+   * | OFF |     |     |     |
+   * |-----+-----+-----+-----|
+   * |  ON |     |     |MODES|
+   * `---------------------- '
+   */
+```
+
+You can toggle the music mode on and off. You can also change the mode of music modes. Lastly, you can switch to the Music 4 Life mode but tapping the key marked `4EVER` above (see below). For more information on music mode, see the [QMK Documentation](https://beta.docs.qmk.fm/features/feature_audio).
+
+_NOTE: This layer will only make sounds if you install a speaker. At the time of this writing, you can get the Proton C specific piezo speaker for [$2.61 with free overnight shipping](https://www.arrow.com/en/products/ast1109mltrq/mallory-sonalert-products). You can solder it on by desoldering the row wires where they contact the cathode end of the diodes. Then flip over the Proton C and solder the piezo speaker in. Then re-solder the row wires and you should hear beeps and boops the next time you plug in your keyboard._
+
+#### Music 4 Life
+
+```
+    /* MUSIC_4_LIFE
+   * ,-----------------------.
+   * |  ♫  |  ♫  |  ♫  |  ♫  |
+   * |-----+-----+-----+-----|
+   * |  ♫  |  ♫  |  ♫  |  ♫  |
+   * |-----+-----+-----+-----|
+   * |  ♫  |  ♫  |  ♫  |  ♫  |
+   * |-----+-----+-----+-----|
+   * |  ♫  |  ♫  |  ♫  |  ♫  |
+   * `---------------------- '
+   */
+```
+
+Music mode on every single key. However, you will need to unplug your keyboard in order to get out of this mode. The benefit of this is that you can use every single key as opposed to the few left over in the Music Mode layer. Try changing the chromatic mode before switching to this mode.
+
+#### Mouse
+
+```
+    /* MOUSE
+   * ,-------------------------------------------------.
+   * |  BUTTON 5 |           | SCROLL UP  |     X      |
+   * |-----------+-----------+------------+------------|
+   * |     X     |LEFT CLICK |     UP     |RIGHT CLICK |
+   * |-----------+-----------+------------+------------|
+   * |  BUTTON 4 |   LEFT    |    DOWN    |   RIGHT    |
+   * |-----------+-----------+------------+------=-----|
+   * |  BUTTON 3 |SCROLL LEFT|SCROLL DOWN |SCROLL RIGHT|
+   * `-------------------------------------------------'
+   */
+```
+
+Switch to this mode, force yourself through the steep transitionary period, and then you can ditch mice and trackpads forever!
+
+#### Terminal
+
+```
+    /* TERMINAL
+   * ,---------------------------------------.
+   * |            |ABOUT|          |    X    |
+   * |------------+-----+----------+---------|
+   * |TERMINAL OFF|PRINT|          |         |
+   * |------------+-----+----------+---------|
+   * |     X      |FLUSH|          |         |
+   * |------------+-----+----------+---------|
+   * |TERMINAL ON |HELP |          |         |
+   * `--------=======------------------------'
+   */
+```
+
+This layer is not currently working but has been left as an example of how to write macros.
+
+#### Admin
+
+```
+    /* ADMIN
+   * ,-----------------------------------------.
+   * |   RESET    |     |           |    X     |
+   * |------------+-----+-----------+----------|
+   * |ABOUT CKEYS |     |           |          |
+   * |------------+-----+-----------+----------|
+   * |            |     |CLICKY UP  |CLICKY OFF|
+   * |------------+-----+-----------+----------|
+   * |     X      |     |CLICKY DOWN|CLICKY ON |
+   * `-----------------------------------------'
+   */
+```
+
+The most important key in this layer is the `RESET` switch. Use it to flash new firmware. It does the same thing as the hardware button on the Proton C. But since you soldered the Proton C with the reset button facing towards the keys, the only way to reach it is to de-solder wires. The reset switch solves this. Program a reset switch into all of your future keyboards.
+
+The `ABOUT CKEYS` is another example of using a macro. It will type out a few sentences about cKeys.
+
+The clicky buttons will only make a difference if you install a piezo speaker. If you install a speaker, then you can make your keyboard extra clicky sounding even if you did not install clicky switches.
+
+![](https://ckeys.org/images/proton-c-handwire-2.jpg)
+![](https://ckeys.org/images/proton-c-handwire-3.jpg)
+![](https://ckeys.org/images/handwire-1.jpg)
+![](https://ckeys.org/images/handwire-2.jpg)
+![](https://ckeys.org/images/handwire-3.jpg)

keyboards/ckeys/handwire_101/rules.mk

@@ -0,0 +1,69 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+BOOTLOADER = caterina
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+TERMINAL_ENABLE = yes
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+#MIDI_ENABLE = yes            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = yes           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches

keyboards/ckeys/readme.md

@@ -1,9 +1,10 @@
-# Ckeys.org
+# cKeys.org
 
-[ckeys](https://ckeys.org/) is a mechanical keyboard based non profit, located in Seattle, Washington. 
+[cKeys](https://ckeys.org/) is a mechanical keyboard-based nonprofit organization located in Seattle, Washington.
 
 In addition, to hosting the [Seattle Mechanical Keyboard Meetups](https://ckeys.org/events/), they have [soldering workshops](https://ckeys.org/workshops/) featuring hardware hosted in this repository.
 
 * Supported Hardware
-    * The Obelus - 4x4 Macropad
+    * The Obelus   - 4x4 Macropad
-    * naKey      - Through hole numpad
+    * naKey        - Through hole numpad
+    * Handwire 101 - Handwired 4x4 (Proton C or Pro Micro)

keyboards/crawlpad/config.h

@@ -1,5 +1,4 @@
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -46,4 +45,3 @@
 #define RGBLED_NUM 3
 #endif
 
-#endif

keyboards/crawlpad/crawlpad.h

@@ -1,9 +1,8 @@
-#ifndef KB_H
+#pragma once
-#define KB_H
 
 #include "quantum.h"
 
-#define KEYMAP( \
+#define LAYOUT_ortho_4x4( \
 	K00, K01, K02, K03, \
 	K10, K11, K12, K13, \
 	K20, K21, K22, K23, \
@@ -15,4 +14,3 @@
 	{ K30,   K31,   K32,   K33 }  \
 }
 
-#endif

keyboards/crawlpad/crawlpad.json

@@ -1 +0,0 @@
-{"version":1,"keyboard":{"keys":[{"id":0,"legend":"7\nHome\n\n\n\n\n\nNLCK","state":{"x":0,"y":1,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000\n\n\n\n\n\n\n#0015d4","fa":[0,1,0,0,0,0,0,1]},"row":0,"col":0,"keycodes":[{"id":"KC_P7","fields":[]},{"id":"KC_NLCK","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":1,"legend":"8\n↑\n\n\n\n\n\nBL1","state":{"x":1,"y":1,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000\n\n\n\n\n\n\n#0015d4","fa":[0,0,0,0,0,0,0,1]},"row":0,"col":1,"keycodes":[{"id":"KC_P8","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":2,"legend":"9\nPgUp","state":{"x":2,"y":1,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000","fa":[0,0,0,0,0,0,0,1]},"row":0,"col":2,"keycodes":[{"id":"KC_P9","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":3,"legend":"+\n\n\n\n\n\n\n/","state":{"x":3,"y":1,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000\n\n\n#020ad1\n\n\n\n#0015d4","fa":[0,0,0,0,0,0,0,1],"f":3},"row":0,"col":3,"keycodes":[{"id":"KC_PPLS","fields":[]},{"id":"KC_PSLS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":4,"legend":"4\n←","state":{"x":0,"y":2,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000","fa":[0,0,0,0,0,0,0,1],"f":3},"row":1,"col":0,"keycodes":[{"id":"KC_P4","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":5,"legend":"5\n\n\n\n\n\n\nBL2","state":{"x":1,"y":2,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000\n\n\n\n\n\n\n#0015d4","fa":[0,0,0,0,0,0,0,1],"f":3},"row":1,"col":1,"keycodes":[{"id":"KC_P5","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":6,"legend":"6\n→","state":{"x":2,"y":2,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000","fa":[0,0,0,0,0,0,0,1],"f":3},"row":1,"col":2,"keycodes":[{"id":"KC_P6","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":7,"legend":"-","state":{"x":3,"y":2,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000","fa":[0,0,0,0,0,0,0,1],"f":3},"row":1,"col":3,"keycodes":[{"id":"KC_PMNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNLine truncated

keyboards/crawlpad/info.json

@@ -0,0 +1,29 @@
+{
+  "keyboard_name": "Crawlpad",
+  "url": "",
+  "maintainer": "colemarkham",
+  "width": 4,
+  "height": 4,
+  "layouts": {
+    "LAYOUT_ortho_4x4": {
+      "layout": [
+        {"label":"7", "x":0, "y":0},
+        {"label":"8", "x":1, "y":0},
+        {"label":"9", "x":2, "y":0},
+        {"label":"+", "x":3, "y":0},
+        {"label":"4", "x":0, "y":1},
+        {"label":"5", "x":1, "y":1},
+        {"label":"6", "x":2, "y":1},
+        {"label":"-", "x":3, "y":1},
+        {"label":"1", "x":0, "y":2},
+        {"label":"2", "x":1, "y":2},
+        {"label":"3", "x":2, "y":2},
+        {"label":"*", "x":3, "y":2},
+        {"label":"Fn", "x":0, "y":3},
+        {"label":"0", "x":1, "y":3},
+        {"label":".", "x":2, "y":3},
+        {"label":"Enter", "x":3, "y":3}
+      ]
+    }
+  }
+}

keyboards/crawlpad/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-#include "../../crawlpad.h"
+#include QMK_KEYBOARD_H
 
 enum custom_keycodes {
   BL1 = SAFE_RANGE,
@@ -11,17 +11,19 @@ const uint8_t LED_PINS[] = LED_ROW_PINS;
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-KEYMAP(
+  [0] = LAYOUT_ortho_4x4(
-    KC_P7, KC_P8, KC_P9, KC_PPLS,
+    KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
-    KC_P4, KC_P5, KC_P6, KC_PMNS,
+    KC_P4,   KC_P5,   KC_P6,   KC_PMNS,
-    KC_P1, KC_P2, KC_P3, KC_PAST,
+    KC_P1,   KC_P2,   KC_P3,   KC_PAST,
-    MO(1), KC_P0, KC_PDOT, KC_ENT),
+    MO(1),   KC_P0,   KC_PDOT, KC_ENT
+  ),
 
-KEYMAP(
+  [1] = LAYOUT_ortho_4x4(
-    KC_NLCK, BL1, KC_TRNS, KC_PSLS,
+    KC_NLCK, BL1,     KC_TRNS, KC_PSLS,
-    RESET, BL2, KC_TRNS, KC_TRNS,
+    RESET,   BL2,     KC_TRNS, KC_TRNS,
-    KC_TRNS, BL3, KC_TRNS, KC_TRNS,
+    KC_TRNS, BL3,     KC_TRNS, KC_TRNS,
-    KC_TRNS, BL4, KC_TRNS, KC_TRNS),
+    KC_TRNS, BL4,     KC_TRNS, KC_TRNS
+  ),
 
 };
 
@@ -35,19 +37,6 @@ void set_led(int idx, bool enable) {
   }
 }
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  return MACRO_NONE ;
-}
-
-void matrix_init_user(void) {
-  /* set LED row pins to output and low */
-  DDRB |= (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7);
-  PORTB &= ~(1 << 4) & ~(1 << 5) & ~(1 << 6) & ~(1 << 7);
-}
-
-void matrix_scan_user(void) {
-}
-
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
   case BL1:
@@ -82,6 +71,15 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   return true;
 }
 
+void matrix_init_user(void) {
+  /* set LED row pins to output and low */
+  DDRB |= (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7);
+  PORTB &= ~(1 << 4) & ~(1 << 5) & ~(1 << 6) & ~(1 << 7);
+}
+
+void matrix_scan_user(void) {
+}
+
 void led_set_user(uint8_t usb_led) {
 
   if (usb_led & (1 << USB_LED_NUM_LOCK)) {

keyboards/crawlpad/readme.md

@@ -1,6 +1,6 @@
 # Crawlpad
 
-![Crawlpad](https://imgur.com/8BnztWo)
+![Crawlpad](https://i.imgur.com/8BnztWo.jpg)
 
 A 4x4 macropad/numpad, exclusively availabe at Keycrawl events.
 
@@ -12,6 +12,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make crawlpad:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-For those that prefer a GUI tool, the crawlpad.json file in this repo can be used on [kbfirmware.com](http://kbfirmware.com).

keyboards/crawlpad/rules.mk

@@ -44,13 +44,15 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no	      # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+MOUSEKEY_ENABLE = yes	      # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes	      # Audio control and System control(+450)
-CONSOLE_ENABLE ?= no	# Console for debug(+400)
+CONSOLE_ENABLE = no	        # Console for debug(+400)
-COMMAND_ENABLE ?= no    # Commands for debug and configuration
+COMMAND_ENABLE = no         # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes		        # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE ?= no  # [Crawlpad] Custom backlighting code is used, so this should not be enabled
+BACKLIGHT_ENABLE = no       # [Crawlpad] Custom backlighting code is used, so this should not be enabled
-AUDIO_ENABLE ?= no # [Crawlpad] This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+AUDIO_ENABLE = no           # [Crawlpad] This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
-RGBLIGHT_ENABLE ?= no # [Crawlpad] This can be enabled if a ws2812 strip is connected to the expansion port.
+RGBLIGHT_ENABLE = no        # [Crawlpad] This can be enabled if a ws2812 strip is connected to the expansion port.
+
+LAYOUTS = ortho_4x4

keyboards/duck/eagle_viper/v2/config.h

@@ -21,9 +21,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x444B // Duck ("DK")
-#define PRODUCT_ID      0x6050
+#define PRODUCT_ID      0x4556 // Eagle/Viper ("EV")
-#define DEVICE_VER      0x0104
+#define DEVICE_VER      0x0002
 #define MANUFACTURER    Duck
 #define PRODUCT         Eagle/Viper V2
 #define DESCRIPTION     60% Korean custom keyboard

keyboards/duck/jetfire/config.h

@@ -20,9 +20,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x444B // Duck ("DK")
-#define PRODUCT_ID      0x6050
+#define PRODUCT_ID      0x4A46 // Jetfire ("JF")
-#define DEVICE_VER      0x0104
+#define DEVICE_VER      0x0001
 #define MANUFACTURER    Duck
 #define PRODUCT         Jetfire
 #define DESCRIPTION     A custom keyboard

keyboards/duck/lightsaver/config.h

@@ -21,8 +21,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x444B // Duck ("DK")
-#define PRODUCT_ID      0x1337
+#define PRODUCT_ID      0x4C53 // Lightsaver ("LS")
 #define DEVICE_VER      0x0003
 #define MANUFACTURER    Duck
 #define PRODUCT         Lightsaver V3

keyboards/duck/octagon/v1/config.h

@@ -21,9 +21,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x444B // Duck ("DK")
-#define PRODUCT_ID      0x6050
+#define PRODUCT_ID      0x4F31 // Octagon V1 ("O1")
-#define DEVICE_VER      0x0104
+#define DEVICE_VER      0x0001
 #define MANUFACTURER    Duck
 #define PRODUCT         Octagon V1
 #define DESCRIPTION     Duck Octagon V1

keyboards/duck/octagon/v2/config.h

@@ -21,9 +21,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x444B // Duck ("DK")
-#define PRODUCT_ID      0x6050
+#define PRODUCT_ID      0x4F32 // Octagon V2 ("O2")
-#define DEVICE_VER      0x0104
+#define DEVICE_VER      0x0002
 #define MANUFACTURER    Duck
 #define PRODUCT         Octagon V2
 #define DESCRIPTION     Duck Octagon V2

keyboards/ergodox_ez/keymaps/bdk/config.h

@@ -0,0 +1,5 @@
+#pragma once
+
+#define ONESHOT_TAP_TOGGLE 2
+#define ONESHOT_TIMEOUT 167
+#define FORCE_NKRO

keyboards/ergodox_ez/keymaps/bdk/keymap.c

@@ -0,0 +1,176 @@
+#include QMK_KEYBOARD_H
+
+#define SHIFT_DOWN() (get_mods() & (MOD_BIT(KC_LSFT)|MOD_BIT(KC_RSFT)))
+#define KC_FKEYS MO(FKEYS)
+
+// Layers
+enum {
+    BASE=0,
+    SYMNUM,  // Symbols and numbers (activated by holding enter)
+    FKEYS,   // Function keys (activated by a thumb button)
+};
+
+// counter that increments on all key press events.  This is needed for our LT
+// handling
+uint16_t press_counter = 0;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// Keymap 0: Base layer
+
+[BASE] = LAYOUT_ergodox(
+  // left hand ---------------------------------------------------------------------------------------------------
+  KC_NO,          KC_EXLM,        KC_AT,          KC_HASH,        KC_DLR,         KC_PERC,        KC_NO,
+  KC_GRV,         KC_QUOT,        KC_COMM,        KC_DOT,         KC_P,           KC_Y,           KC_LGUI,
+  KC_SLSH,        KC_A,           KC_O,           KC_E,           KC_U,           KC_I,
+  KC_LSFT,        KC_SCLN,        KC_Q,           KC_J,           KC_K,           KC_X,           KC_HOME,
+  KC_LCTL,        KC_LALT,        KC_PGUP,        KC_PGDN,        KC_NO,
+  // left thumb --------------------------------------------------------------------------------------------------
+                                                                                  KC_NO,          KC_NO,
+                                                                                                  KC_NO,
+                                                                  KC_SPC,         KC_TAB,         KC_FKEYS,
+  // right hand --------------------------------------------------------------------------------------------------
+  KC_NO,          KC_CIRC,        KC_AMPR,        KC_ASTR,        KC_LPRN,        KC_RPRN,        KC_NO,
+  KC_RGUI,        KC_F,           KC_G,           KC_C,           KC_R,           KC_L,           KC_BSLS,
+                  KC_D,           KC_H,           KC_T,           KC_N,           KC_S,           KC_MINS,
+  KC_END,         KC_B,           KC_M,           KC_W,           KC_V,           KC_Z,           KC_RSFT,
+                  KC_LEFT,        KC_UP,          KC_DOWN,        KC_RIGHT,       KC_RCTL,
+  // right thumb -------------------------------------------------------------------------------------------------
+  KC_NO,          KC_NO,
+  KC_NO,
+  KC_DEL,         KC_BSPC,        KC_ENT
+),
+// SYMNUM -- numpad and function keys
+[SYMNUM] = LAYOUT_ergodox(
+  // left hand ---------------------------------------------------------------------------------------------------
+  KC_TRNS,        LALT(KC_1),     LALT(KC_2),     LALT(KC_3),     LALT(KC_4),     LALT(KC_5),     KC_TRNS,
+  KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_AMPR,        KC_TRNS,        KC_TRNS,
+  KC_TRNS,        KC_LCBR,        KC_LBRC,        KC_LPRN,        KC_0,           KC_MINS,
+  KC_TRNS,        KC_6,           KC_7,           KC_8,           KC_9,           KC_SLSH,        KC_TRNS,
+  KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,
+  // left thumb --------------------------------------------------------------------------------------------------
+                                                                                  KC_TRNS,        KC_TRNS,
+                                                                                                  KC_TRNS,
+                                                                  KC_TRNS,        KC_TRNS,        KC_TRNS,
+  // right hand --------------------------------------------------------------------------------------------------
+  KC_TRNS,        LALT(KC_6),     LALT(KC_7),     LALT(KC_8),     LALT(KC_9),     LALT(KC_0),     KC_TRNS,
+  KC_TRNS,        KC_PERC,        KC_EQL,         KC_LT,          KC_GT,          KC_EXLM,        KC_TRNS,
+                  KC_PLUS,        KC_1,           KC_RPRN,        KC_RBRC,        KC_RCBR,        KC_TRNS,
+  KC_TRNS,        KC_ASTR,        KC_2,           KC_3,           KC_4,           KC_5,           KC_TRNS,
+                  KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,
+  // right thumb -------------------------------------------------------------------------------------------------
+  KC_TRNS,        KC_TRNS,
+  KC_TRNS,
+  KC_TRNS,        KC_TRNS,        KC_TRNS
+),
+// FKEYS -- function keys
+[FKEYS] = LAYOUT_ergodox(
+  // left hand ---------------------------------------------------------------------------------------------------
+  KC_TRNS,        KC_F1,          KC_F2,          KC_F3,          KC_F4,          KC_F5,          KC_F6,
+  KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,
+  KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,
+  KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,
+  KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,
+  // left thumb --------------------------------------------------------------------------------------------------
+                                                                                  KC_TRNS,        KC_TRNS,
+                                                                                                  KC_TRNS,
+                                                                  KC_TRNS,        KC_TRNS,        KC_TRNS,
+  // right hand --------------------------------------------------------------------------------------------------
+  KC_F7,          KC_F8,          KC_F9,          KC_F10,         KC_F11,         KC_F12,         KC_TRNS,
+  KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,
+                  KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,
+  KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,
+                  KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,        KC_TRNS,
+  // right thumb -------------------------------------------------------------------------------------------------
+  KC_TRNS,        KC_TRNS,
+  KC_TRNS,
+  KC_TRNS,        KC_TRNS,        KC_TRNS
+),
+};
+
+// Code to handle layer tap.
+//
+// The default code doesn't work for me, so I rolled my own code.  The main
+// difference is that it always tries to send modifier+key combination, rather
+// than two keys.  One place where this is noticable is if you tap the key,
+// then try hold it.
+
+struct tap_start_info {
+    uint16_t timer;
+    uint16_t initial_press_counter;
+};
+
+static struct tap_start_info tap_start_infos[5];
+
+// Quick check to see if a key is down.  Note that this requires NKRO enabled
+static bool key_down(uint8_t code) {
+    return (keyboard_report->nkro.bits[code>>3] & 1<<(code&7)) != 0;
+}
+
+static bool handle_lt(uint16_t keycode, keyrecord_t *record, uint8_t layer, uint8_t index) {
+    struct tap_start_info* tap_start = tap_start_infos + index;
+
+    if(record->event.pressed) {
+        layer_on(layer);
+        tap_start->timer = timer_read();
+        tap_start->initial_press_counter = press_counter;
+    } else {
+        layer_off(layer);
+        // Only click the key if:
+        //   - No other keys are pressed between the press and release events
+        //   - The release happens before the ONESHOT_TIMEOUT
+        if(press_counter == tap_start->initial_press_counter && timer_elapsed(tap_start->timer) < ONESHOT_TIMEOUT) {
+            register_code16(keycode);
+            unregister_code16(keycode);
+        }
+    }
+    return false;
+}
+
+static bool handle_mt(uint16_t keycode, keyrecord_t *record, uint8_t mods, uint8_t index) {
+    struct tap_start_info* tap_start = tap_start_infos + index;
+
+    if(record->event.pressed) {
+        register_mods(mods);
+        tap_start->timer = timer_read();
+        tap_start->initial_press_counter = press_counter;
+    } else {
+        unregister_mods(mods);
+        // Only click the key if:
+        //   - No other keys are pressed between the press and release events
+        //   - The release happens before the ONESHOT_TIMEOUT
+        if(press_counter == tap_start->initial_press_counter && timer_elapsed(tap_start->timer) < ONESHOT_TIMEOUT) {
+            register_code16(keycode);
+            unregister_code16(keycode);
+        }
+    }
+    return false;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if(record->event.pressed) {
+        press_counter++;
+        // The symbol layer allows sequences repeat the same "physical" key.
+        // For example "0)", which is like pressing the "0" key twice in a
+        // row.  It's very easy to make a sequence of these where the ")"
+        // press comes before the "0" release.  If that happens, force a
+        // release of the "0" key, otherwise nothing will happen.
+        uint8_t shortcode = keycode & 0xFF;
+        if(key_down(shortcode)) {
+            unregister_code(shortcode);
+        }
+    }
+
+    switch(keycode) {
+        case KC_ENTER:
+            return handle_lt(keycode, record, SYMNUM, 0);
+
+        case KC_TAB:
+            return handle_mt(keycode, record, MOD_BIT(KC_LCTL), 1);
+
+        case KC_LSFT:
+        case KC_RSFT:
+            return handle_mt(KC_ESC, record, MOD_BIT(keycode), 2);
+    }
+    return true;
+}

keyboards/ergodox_ez/keymaps/bdk/readme.md

@@ -0,0 +1,36 @@
+# The BDK Ergodox Keyboard Layout
+
+## Dvorak-based
+
+This was the first alternative layout I switched to and I don't want to change
+again.
+
+## Mod-tap / Layer-tap is great for thumb keys
+
+This means a key that activates a layer/modifier when you hold it down, but
+results in a keyclick when you tap it.  Thumb keys are great for this since
+they are good for both high-usage keys as well as modifiers.
+
+The one thing to avoid is when you mean to tap a key, but hit the next key
+before you release, which results in the modifier/layer instead of a tap.  To
+avoid this, I chose Enter/Tab as the tap keys, since they aren't chorded
+together with other keys often.
+
+The other issue is I found several problems with using the standard MT,LT code,
+so I rolled my own to handle it.
+
+## Don't have too many layers
+
+My first layouts had multiple layers that I could switch to, but that
+overloaded my brain.  This layout basically only uses 1 extra layer.
+Technically there's also a function key layer, but I only use those keys for
+a handlful of things: boot order, rename, reload page, that's basically it.
+
+## Brackets should be easy to use
+
+There's a lot of ways to lay out a symbol layer.  I organized mine around
+making the {[()]} chars easy to use since they're so frequent in programming.
+I put them all on the symbol layer home row.
+
+I also arranged the numbers so 0/1 were also on the symbol layer home row.
+This makes for fairly easy chording of "[0]" and "[1]".

keyboards/ergodox_ez/keymaps/bdk/rules.mk

@@ -0,0 +1,3 @@
+# CONSOLE_ENABLE   = yes
+# DEBUG_ENABLE = yes
+COMMAND_ENABLE   = no

keyboards/handwired/ortho5x13/ortho5x13.h

@@ -1,5 +1,4 @@
-#ifndef ORTHO5X13_H
+#pragma once
-#define ORTHO5X13_H
 
 #include "quantum.h"
 
@@ -18,7 +17,7 @@
   { k40, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4a, k4b, k4c } \
 }
 
-#define LAYOUT_compact( \
+#define LAYOUT_kc( \
   k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
   k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
   k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
@@ -32,5 +31,3 @@
   { KC_##k30, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k35, KC_##k35, KC_##k37, KC_##k38, KC_##k39, KC_##k3a, KC_##k3b, KC_##k3c }, \
   { KC_##k40, KC_##k41, KC_##k42, KC_##k43, KC_##k44, KC_##k45, KC_NO,    KC_##k47, KC_##k48, KC_##k49, KC_##k4a, KC_##k4b, KC_##k4c } \
 }
-
-#endif

keyboards/handwired/xealous/debounce.c

@@ -0,0 +1,63 @@
+#include <string.h>
+#include "config.h"
+#include "matrix.h"
+#include "timer.h"
+#include "quantum.h"
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+//Debouncing counters
+typedef uint8_t debounce_counter_t;
+#define DEBOUNCE_COUNTER_MODULO 250
+#define DEBOUNCE_COUNTER_INACTIVE 251
+
+static debounce_counter_t *debounce_counters;
+
+void debounce_init(uint8_t num_rows)
+{
+  debounce_counters = malloc(num_rows*MATRIX_COLS);
+  memset(debounce_counters, DEBOUNCE_COUNTER_INACTIVE, num_rows*MATRIX_COLS);
+}
+
+void update_debounce_counters(uint8_t num_rows, uint8_t current_time)
+{
+  for (uint8_t row = 0; row < num_rows; row++)
+  {
+    for (uint8_t col = 0; col < MATRIX_COLS; col++)
+    {
+      if (debounce_counters[row*MATRIX_COLS + col] != DEBOUNCE_COUNTER_INACTIVE)
+      {
+        if (TIMER_DIFF(current_time, debounce_counters[row*MATRIX_COLS + col], DEBOUNCE_COUNTER_MODULO) >= DEBOUNCING_DELAY) {
+          debounce_counters[row*MATRIX_COLS + col] = DEBOUNCE_COUNTER_INACTIVE;
+        }
+      }
+    }
+  }
+}
+
+void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time)
+{
+    for (uint8_t row = 0; row < num_rows; row++)
+    {
+      matrix_row_t delta = raw[row] ^ cooked[row];
+
+      for (uint8_t col = 0; col < MATRIX_COLS; col++)
+      {
+          if (debounce_counters[row*MATRIX_COLS + col] == DEBOUNCE_COUNTER_INACTIVE && (delta & (1<<col)))
+          {
+              debounce_counters[row*MATRIX_COLS + col] = current_time;
+              cooked[row] ^= (1 << col);
+          }
+      }
+    }
+}
+
+void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed)
+{
+    uint8_t current_time = timer_read() % DEBOUNCE_COUNTER_MODULO;
+
+    update_debounce_counters(num_rows, current_time);
+    transfer_matrix_values(raw, cooked, num_rows, current_time);
+}

keyboards/handwired/xealous/rules.mk

@@ -1,4 +1,5 @@
-SRC += matrix_scanrate.c matrix.c 
+#SRC += matrix_scanrate.c matrix.c
+SRC += debounce.c
 
 # MCU name
 MCU = atmega32u4
@@ -66,7 +67,8 @@ SUBPROJECT_rev1 = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-CUSTOM_MATRIX = yes
+CUSTOM_MATRIX = no
+CUSTOM_DEBOUNCE = yes
 
 LAYOUTS = split60
 

keyboards/iris/iris.h

@@ -11,6 +11,7 @@
 #endif
 
 #include "quantum.h"
+#include "../../zeal60/zeal60_keycodes.h"
 
 // Used to create a keymap using only KC_ prefixed keys
 #define LAYOUT_kc( \

keyboards/iris/keymaps/default/keymap.c

@@ -2,21 +2,14 @@
 
 extern keymap_config_t keymap_config;
 
-#define _QWERTY 0
+#define _MAIN 0
-#define _LOWER 1
+#define _FN1 1
-#define _RAISE 2
+#define _FN2 2
-#define _ADJUST 16
+#define _FN3 3
-
-enum custom_keycodes {
-  QWERTY = SAFE_RANGE,
-  LOWER,
-  RAISE,
-  ADJUST,
-};
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [_QWERTY] = LAYOUT(
+  [_MAIN] = LAYOUT(
   //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
      KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                               KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
   //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
@@ -26,11 +19,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
      KC_LCTL, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_HOME,          KC_END,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
   //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
-                                    KC_LGUI, LOWER,   KC_ENT,                    KC_SPC,  RAISE,   KC_LALT
+                                    KC_LGUI, FN_MO13, KC_ENT,                    KC_SPC,  FN_MO23, KC_LALT
                                 // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
   ),
 
-  [_LOWER] = LAYOUT(
+  [_FN1] = LAYOUT(
   //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
      KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                            KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
   //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
@@ -44,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                 // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
   ),
 
-  [_RAISE] = LAYOUT(
+  [_FN2] = LAYOUT(
   //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
      KC_F12,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                              KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
   //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
@@ -58,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                 // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
   ),
 
-  [_ADJUST] = LAYOUT(
+  [_FN3] = LAYOUT(
   //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
      _______, _______, _______, _______, _______, _______,                            _______, _______, _______, _______, _______, _______,
   //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
@@ -73,42 +66,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   )
 };
 
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+void encoder_update_user(uint8_t index, bool clockwise) {
-  switch (keycode) {
+    if (index == 0) {
-    case QWERTY:
+        if (clockwise) {
-      if (record->event.pressed) {
+            tap_code(KC_PGDN);
-        set_single_persistent_default_layer(_QWERTY);
+        } else {
-      }
+            tap_code(KC_PGUP);
-      return false;
+        }
-      break;
+    }
-    case LOWER:
-      if (record->event.pressed) {
-        layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case RAISE:
-      if (record->event.pressed) {
-        layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      } else {
-        layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
-      }
-      return false;
-      break;
-    case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
-  }
-  return true;
 }

keyboards/iris/rev1/config.h

@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_CONFIG_H
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
+#define VENDOR_ID       0xCB10
 #define PRODUCT_ID      0x1256
 #define DEVICE_VER      0x0100
 #define MANUFACTURER    Keebio
@@ -68,20 +68,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN D3
 #define RGBLED_NUM 12    // Number of LEDs
 
-/*
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
 
-/* disable debug print */
+// EEPROM usage
-// #define NO_DEBUG
 
-/* disable print */
+// TODO: refactor with new user EEPROM code (coming soon)
-// #define NO_PRINT
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
 
-/* disable action features */
+// Dynamic keymap starts after EEPROM version
-//#define NO_ACTION_LAYER
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
-//#define NO_ACTION_TAPPING
+// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
-//#define NO_ACTION_ONESHOT
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 515
-//#define NO_ACTION_MACRO
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 509    // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
-//#define NO_ACTION_FUNCTION
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/iris/rev1/rev1.c

@@ -7,20 +7,6 @@ void led_set_kb(uint8_t usb_led) {
 }
 #endif
 
-void matrix_init_kb(void) {
-
-    // // green led on
-    // DDRD |= (1<<5);
-    // PORTD &= ~(1<<5);
-
-    // // orange led on
-    // DDRB |= (1<<0);
-    // PORTB &= ~(1<<0);
-
-	matrix_init_user();
-};
-
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 // swap-hands action needs a matrix to define the swap

keyboards/iris/rev1_led/config.h

@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_CONFIG_H
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
+#define VENDOR_ID       0xCB10
 #define PRODUCT_ID      0x1256
 #define DEVICE_VER      0x0100
 #define MANUFACTURER    Keebio
@@ -68,20 +68,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN D3
 #define RGBLED_NUM 12    // Number of LEDs
 
-/*
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
 
-/* disable debug print */
+// EEPROM usage
-// #define NO_DEBUG
 
-/* disable print */
+// TODO: refactor with new user EEPROM code (coming soon)
-// #define NO_PRINT
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
 
-/* disable action features */
+// Dynamic keymap starts after EEPROM version
-//#define NO_ACTION_LAYER
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
-//#define NO_ACTION_TAPPING
+// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
-//#define NO_ACTION_ONESHOT
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 515
-//#define NO_ACTION_MACRO
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 509    // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
-//#define NO_ACTION_FUNCTION
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/iris/rev1_led/rev1_led.c

@@ -7,20 +7,6 @@ void led_set_kb(uint8_t usb_led) {
 }
 #endif
 
-void matrix_init_kb(void) {
-
-    // // green led on
-    // DDRD |= (1<<5);
-    // PORTD &= ~(1<<5);
-
-    // // orange led on
-    // DDRB |= (1<<0);
-    // PORTB &= ~(1<<0);
-
-	matrix_init_user();
-};
-
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 // swap-hands action needs a matrix to define the swap

keyboards/iris/rev2/config.h

@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_CONFIG_H
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
+#define VENDOR_ID       0xCB10
 #define PRODUCT_ID      0x1256
 #define DEVICE_VER      0x0200
 #define MANUFACTURER    Keebio
@@ -68,20 +68,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN D3
 #define RGBLED_NUM 12    // Number of LEDs
 
-/*
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
 
-/* disable debug print */
+// EEPROM usage
-// #define NO_DEBUG
 
-/* disable print */
+// TODO: refactor with new user EEPROM code (coming soon)
-// #define NO_PRINT
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
 
-/* disable action features */
+// Dynamic keymap starts after EEPROM version
-//#define NO_ACTION_LAYER
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
-//#define NO_ACTION_TAPPING
+// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
-//#define NO_ACTION_ONESHOT
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 515
-//#define NO_ACTION_MACRO
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 509    // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
-//#define NO_ACTION_FUNCTION
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/iris/rev2/rev2.c

@@ -7,20 +7,6 @@ void led_set_kb(uint8_t usb_led) {
 }
 #endif
 
-void matrix_init_kb(void) {
-
-    // // green led on
-    // DDRD |= (1<<5);
-    // PORTD &= ~(1<<5);
-
-    // // orange led on
-    // DDRB |= (1<<0);
-    // PORTB &= ~(1<<0);
-
-	matrix_init_user();
-};
-
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 // swap-hands action needs a matrix to define the swap

keyboards/iris/rev3/config.h

@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_CONFIG_H
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
+#define VENDOR_ID       0xCB10
 #define PRODUCT_ID      0x1256
 #define DEVICE_VER      0x0300
 #define MANUFACTURER    Keebio
@@ -35,6 +35,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // wiring of each half
 #define MATRIX_ROW_PINS { D2, D3, D5, D7, D6 }
 #define MATRIX_COL_PINS { F1, F4, F5, F6, D4, B4 }
+#define SPLIT_HAND_PIN F0
+#define QMK_ESC_OUTPUT D2
+#define QMK_ESC_INPUT F1
+#define QMK_LED B0
+#define QMK_SPEAKER C6
+
+#define NUMBER_OF_ENCODERS 1
+#define ENCODERS_PAD_A { B5 }
+#define ENCODERS_PAD_B { B7 }
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
@@ -68,20 +77,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN F7
 #define RGBLED_NUM 12    // Number of LEDs
 
-/*
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
 
-/* disable debug print */
+// EEPROM usage
-// #define NO_DEBUG
 
-/* disable print */
+// TODO: refactor with new user EEPROM code (coming soon)
-// #define NO_PRINT
+#define EEPROM_MAGIC 0x451F
+#define EEPROM_MAGIC_ADDR 32
+// Bump this every time we change what we store
+// This will automatically reset the EEPROM with defaults
+// and avoid loading invalid data from the EEPROM
+#define EEPROM_VERSION 0x08
+#define EEPROM_VERSION_ADDR 34
 
-/* disable action features */
+// Dynamic keymap starts after EEPROM version
-//#define NO_ACTION_LAYER
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
-//#define NO_ACTION_TAPPING
+// Dynamic macro starts after dynamic keymaps (35+(4*10*6*2)) = (35+480)
-//#define NO_ACTION_ONESHOT
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 515
-//#define NO_ACTION_MACRO
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 509    // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR
-//#define NO_ACTION_FUNCTION
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16

keyboards/iris/rev3/rev3.c

@@ -7,20 +7,6 @@ void led_set_kb(uint8_t usb_led) {
 }
 #endif
 
-void matrix_init_kb(void) {
-
-    // // green led on
-    // DDRD |= (1<<5);
-    // PORTD &= ~(1<<5);
-
-    // // orange led on
-    // DDRB |= (1<<0);
-    // PORTB &= ~(1<<0);
-
-	matrix_init_user();
-};
-
-
 #ifdef SWAP_HANDS_ENABLE
 __attribute__ ((weak))
 // swap-hands action needs a matrix to define the swap
@@ -39,4 +25,3 @@ const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
     {{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}},
 };
 #endif
-

keyboards/iris/rev3/rev3.h

@@ -12,8 +12,6 @@
 #endif
 #endif
 
-//void promicro_bootloader_jmp(bool program);
-
 #define LAYOUT( \
     L00, L01, L02, L03, L04, L05,           R00, R01, R02, R03, R04, R05, \
     L10, L11, L12, L13, L14, L15,           R10, R11, R12, R13, R14, R15, \

keyboards/iris/rev3/rules.mk

@@ -1,2 +1,3 @@
 RGBLIGHT_ENABLE = yes
 BACKLIGHT_ENABLE = yes
+ENCODER_ENABLE = yes

keyboards/iris/rules.mk

@@ -1,36 +1,6 @@
-# MCU name
 MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
 F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
 ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
 # Bootloader
@@ -50,8 +20,9 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
+
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no         # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
@@ -68,3 +39,8 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 SPLIT_KEYBOARD = yes
 
 DEFAULT_FOLDER = iris/rev2
+
+# VIA Support - Comment these 3 lines out to disable
+RAW_ENABLE = yes
+DYNAMIC_KEYMAP_ENABLE = yes
+SRC += keyboards/wilba_tech/wt_main.c

keyboards/kbd6x/keymaps/konstantin/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+#define LAYER_FN

keyboards/kbd6x/keymaps/konstantin/keymap.c

@@ -0,0 +1,92 @@
+#include QMK_KEYBOARD_H
+#include "konstantin.h"
+
+enum keycodes_keymap {
+  RCTRL = RANGE_KEYMAP,
+};
+
+enum layers_keymap {
+  L_RCTRL = L_RANGE_KEYMAP,
+};
+
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+  case RCTRL:
+    if (record->event.pressed) {
+      layer_on(L_RCTRL);
+      register_code(KC_RCTRL);
+    } else {
+      layer_off(L_RCTRL);
+      unregister_code(KC_RCTRL);
+    }
+    return false;
+
+  default:
+    return true;
+  }
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Base layer
+   * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+   * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │
+   * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+   * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Bspc │
+   * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+   * │LCtCps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │
+   * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+   * │LShiftFn│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│FnL│
+   * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
+   *       │LGu│LAlt │           Space           │RAlGu│RCt│
+   *       └───┴─────┴───────────────────────────┴─────┴───┘
+   */
+  [L_BASE] = LAYOUT(
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+    LCT_CPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+    LSFT_FN, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, FN_FNLK,
+    XXXXXXX, KC_LGUI, KC_LALT,                   KC_SPC,                    RAL_RGU, RCTRL,   XXXXXXX
+  ),
+
+  /* Function layer
+   * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+   * │   │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│PSc│Ins│
+   * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+   * │     │Hom│ ↑ │End│PgU│   │   │   │   │M1 │M↑ │M2 │M3 │ Del │
+   * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+   * │      │ ← │ ↓ │ → │PgD│   │   │   │MW↑│M← │M↓ │M→ │        │
+   * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+   * │        │Mut│VoD│VoU│Ply│Prv│Nxt│MW←│MW→│M4 │M5 │      │   │
+   * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
+   *       │   │     │            MW↓            │     │   │
+   *       └───┴─────┴───────────────────────────┴─────┴───┘
+   */
+  [L_FN] = LAYOUT(
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_INS,
+    _______, KC_HOME, KC_UP,   KC_END,  KC_PGUP, _______, _______, _______, _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_BTN3, KC_DEL,
+    _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, _______,
+    _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_WH_L, KC_WH_R, KC_BTN4, KC_BTN5, _______, _______,
+    XXXXXXX, _______, _______,                   KC_WH_D,                   _______, _______, XXXXXXX
+  ),
+
+  /* RCtrl layer
+   * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+   * │   │   │   │   │   │   │   │   │   │   │   │   │   │   │   │
+   * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+   * │     │Top│Mv↑│Btm│PrT│   │   │   │   │   │   │   │   │Clear│
+   * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+   * │      │Mv←│Mv↓│Mv→│NxT│   │   │   │   │   │   │   │        │
+   * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+   * │        │   │   │   │   │   │   │   │   │   │   │      │   │
+   * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘
+   *       │Dst│Dstp←│                           │Dstp→│   │
+   *       └───┴─────┴───────────────────────────┴─────┴───┘
+   */
+  [L_RCTRL] = LAYOUT(
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, TOP,     MV_UP,   BOTTOM,  PRV_TAB, _______, _______, _______, _______, _______, _______, _______, _______, CLEAR,
+    _______, MV_LEFT, MV_DOWN, MV_RGHT, NXT_TAB, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    XXXXXXX, DESKTOP, DSKTP_L,                   _______,                   DSKTP_R, _______, XXXXXXX
+  ),
+};

keyboards/kbd6x/keymaps/konstantin/rules.mk

@@ -0,0 +1,2 @@
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE  = no

keyboards/lazydesigners/the50/config.h

@@ -0,0 +1,49 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0050
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    LazyDesigners
+#define PRODUCT         THE50
+#define DESCRIPTION     A 50% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3 }
+#define MATRIX_COL_PINS { B5, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 6
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define RGB_DI_PIN E6
+#ifdef RGB_DI_PIN
+#define RGBLED_NUM 1
+#define RGBLIGHT_SLEEP
+#endif

keyboards/lazydesigners/the50/info.json

@@ -0,0 +1,67 @@
+{
+    "keyboard_name": "THE50", 
+    "url": "http://lazydesigners.cn", 
+    "maintainer": "qmk", 
+    "width": 15.25, 
+    "height": 4, 
+    "layouts": {
+        "LAYOUT": {
+            "key_count": 54,
+            "layout": [
+              {"label":"Esc", "x":0, "y":0},
+              {"label":"Q", "x":1, "y":0},
+              {"label":"W", "x":2, "y":0},
+              {"label":"E", "x":3, "y":0},
+              {"label":"R", "x":4, "y":0},
+              {"label":"T", "x":5, "y":0},
+              {"label":"Y", "x":6, "y":0},
+              {"label":"U", "x":7, "y":0},
+              {"label":"I", "x":8, "y":0},
+              {"label":"O", "x":9, "y":0},
+              {"label":"P", "x":10, "y":0},
+              {"label":"Back<br>Space", "x":11, "y":0},
+              {"label":"7", "x":12.25, "y":0},
+              {"label":"8", "x":13.25, "y":0},
+              {"label":"9", "x":14.25, "y":0},
+              {"label":"Tab", "x":0, "y":1, "w":1.25},
+              {"label":"A", "x":1.25, "y":1},
+              {"label":"S", "x":2.25, "y":1},
+              {"label":"D", "x":3.25, "y":1},
+              {"label":"F", "x":4.25, "y":1},
+              {"label":"G", "x":5.25, "y":1},
+              {"label":"H", "x":6.25, "y":1},
+              {"label":"J", "x":7.25, "y":1},
+              {"label":"K", "x":8.25, "y":1},
+              {"label":"L", "x":9.25, "y":1},
+              {"label":"Enter", "x":10.25, "y":1, "w":1.75},
+              {"label":"4", "x":12.25, "y":1},
+              {"label":"5", "x":13.25, "y":1},
+              {"label":"6", "x":14.25, "y":1},
+              {"label":"Shift", "x":0, "y":2, "w":1.75},
+              {"label":"Z", "x":1.75, "y":2},
+              {"label":"X", "x":2.75, "y":2},
+              {"label":"C", "x":3.75, "y":2},
+              {"label":"V", "x":4.75, "y":2},
+              {"label":"B", "x":5.75, "y":2},
+              {"label":"N", "x":6.75, "y":2},
+              {"label":"M", "x":7.75, "y":2},
+              {"label":"<", "x":8.75, "y":2},
+              {"label":">", "x":9.75, "y":2},
+              {"label":"Fn", "x":10.75, "y":2, "w":1.25},
+              {"label":"1", "x":12.25, "y":2},
+              {"label":"2", "x":13.25, "y":2},
+              {"label":"3", "x":14.25, "y":2},
+              {"label":"Hyper", "x":0, "y":3, "w":1.25},
+              {"label":"Super", "x":1.25, "y":3},
+              {"label":"Meta", "x":2.25, "y":3, "w":1.25},
+              {"label":"Space", "x":3.5, "y":3, "w":2.25},
+              {"label":"Space", "x":5.75, "y":3, "w":2.75},
+              {"label":"Meta", "x":8.5, "y":3, "w":1.25},
+              {"label":"Super", "x":9.75, "y":3},
+              {"label":"Hyper", "x":10.75, "y":3, "w":1.25},
+              {"label":"0", "x":12.25, "y":3},
+              {"label":".", "x":13.25, "y":3},
+              {"label":"Enter", "x":14.25, "y":3}]
+        }
+    }
+}

keyboards/lazydesigners/the50/keymaps/default/keymap.c

@@ -0,0 +1,59 @@
+#include QMK_KEYBOARD_H
+
+enum custom_layers {
+  _QWERTY,
+  _FN
+};
+
+// Act as Shift on hold and as CapsLock on tap
+#define SFT_CPS LSFT_T(KC_CAPS)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ *  ,-----------------------------------------------------------. ,--------------.
+ *  |Esc | Q  | W  | E  | R  | T  | Y  | U  | I  | O  | P  |Bspc| | 7  | 8  | 9  |
+ *  |-----------------------------------------------------------| |--------------|
+ *  | Tab  | A  | S  | D  | F  | G  | H  | J  | K  | L  | Enter | | 4  | 5  | 6  |
+ *  |-----------------------------------------------------------| |--------------|
+ *  | Shift  | Z  | X  | C  | V  | B  | N  | M  | ,  | .  | FN  | | 1  | 2  | 3  |
+ *  |-----------------------------------------------------------| |--------------|
+ *  | Ctrl |Gui | Alt  |  Space  |    Space   | RAlt |RGui|RCtrl| | 0  | .  |Entr|
+ *  `-----------------------------------------------------------' `--------------'
+ */
+
+[_QWERTY] = LAYOUT(
+KC_GESC, KC_Q,    KC_W,    KC_E,     KC_R,   KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,     KC_7, KC_8,   KC_9,
+KC_TAB,  KC_A,    KC_S,    KC_D,     KC_F,   KC_G,    KC_H,    KC_J,    KC_K,    KC_L,        KC_ENT,           KC_4, KC_5,   KC_6,
+SFT_CPS, KC_Z,    KC_X,    KC_C,     KC_V,   KC_B,    KC_N,    KC_M,             KC_COMM, KC_DOT,  MO(_FN),     KC_1, KC_2,   KC_3,
+KC_LCTL, KC_LGUI, KC_LALT,       KC_SPC,            KC_SPC,                      KC_RALT, KC_RGUI, KC_RCTL,     KC_0, KC_DOT, KC_ENT
+),
+
+/* FN
+ *  ,-----------------------------------------------------------. ,--------------.
+ *  |RST |    |    |    |    |    |    |    |    |    |Ins |Del | |Home|PgUp|    |
+ *  |-----------------------------------------------------------| |--------------|
+ *  |      |Prev|Play|Next|    |    |    |VolD|Mute|VolU|       | |End |PgDn|    |
+ *  |-----------------------------------------------------------| |--------------|
+ *  |        |    |    |    |    |    |    |    |    |    |     | |    |    |    |
+ *  |-----------------------------------------------------------| |--------------|
+ *  |EEPRST|    |      |         |            |      |    |     | |    |    |    |
+ *  `-----------------------------------------------------------' `--------------'
+ */
+
+[_FN] = LAYOUT(
+RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS,   KC_DEL,     KC_HOME, KC_PGUP, _______,
+_______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, KC_VOLD, KC_MUTE, KC_VOLU,          _______,     KC_END,  KC_PGDN, _______,
+_______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______,     _______, _______, _______,
+EEP_RST, _______, _______,          _______,            _______,                 _______, _______, _______,     _______, _______, _______
+)
+};
+
+void led_set_user(uint8_t usb_led) {
+  // Turn LED On/Off for Caps Lock
+  if (host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK)) {
+    the50_led_on();
+  } else {
+    the50_led_off();
+  }
+}

keyboards/lazydesigners/the50/keymaps/default/readme.md

@@ -0,0 +1,31 @@
+# Default keymap for THE50
+
+**Features**
+
+* Shift acts as CapsLock when tapped
+
+## QWERTY (Normal) Layer
+```
+ ,-----------------------------------------------------------. ,--------------.
+ |Esc | Q  | W  | E  | R  | T  | Y  | U  | I  | O  | P  |Bspc| | 7  | 8  | 9  |
+ |-----------------------------------------------------------| |--------------|
+ | Tab  | A  | S  | D  | F  | G  | H  | J  | K  | L  | Enter | | 4  | 5  | 6  |
+ |-----------------------------------------------------------| |--------------|
+ | Shift  | Z  | X  | C  | V  | B  | N  | M  | ,  | .  | FN  | | 1  | 2  | 3  |
+ |-----------------------------------------------------------| |--------------|
+ | Ctrl |Gui | Alt  |  Space  |    Space   | RAlt |RGui|RCtrl| | 0  | .  |Entr|
+ `-----------------------------------------------------------' `--------------'
+```
+
+## FN Layer
+```
+ ,-----------------------------------------------------------. ,--------------.
+ |RST |    |    |    |    |    |    |    |    |    |Ins |Del | |Home|PgUp|    |
+ |-----------------------------------------------------------| |--------------|
+ |      |Prev|Play|Next|    |    |    |VolD|Mute|VolU|       | |End |PgDn|    |
+ |-----------------------------------------------------------| |--------------|
+ |        |    |    |    |    |    |    |    |    |    |     | |    |    |    |
+ |-----------------------------------------------------------| |--------------|
+ |EEPRST|    |      |         |            |      |    |     | |    |    |    |
+ `-----------------------------------------------------------' `--------------'
+```

keyboards/lazydesigners/the50/readme.md

@@ -0,0 +1,17 @@
+# THE50
+
+![THE50](https://i.loli.net/2018/11/13/5beac9464d402.jpg)
+
+A 50% custom keyboard designed and produced by [LazyDesigners](http://lazydesigners.cn).
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: THE50  
+Hardware Availability: Check for GBs on [Geekhack](https://geekhack.org) and on [LazyDesigner's homepage.](http://lazydesigners.cn)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make lazydesigners/the50:default:dfu
+
+To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/lazydesigners/the50/rules.mk

@@ -0,0 +1,52 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no   # Console for debug(+400)
+COMMAND_ENABLE = no   # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes     # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no  # Enable keyboard underlight functionality

keyboards/lazydesigners/the50/the50.c

@@ -0,0 +1,9 @@
+#include "the50.h"
+
+void the50_led_on() {
+  DDRB |= (1 << 7); PORTB &= ~(1 << 7);
+}
+
+void the50_led_off() {
+  DDRB &= ~(1 << 7); PORTB &= ~(1 << 7);
+}

keyboards/lazydesigners/the50/the50.h

@@ -0,0 +1,32 @@
+#pragma once
+
+#include "quantum.h"
+
+#define XXXX KC_NO
+
+/*
+ *  ,-----------------------------------------------------------. ,--------------.
+ *  |    |    |    |    |    |    |    |    |    |    |    |    | |    |    |    |
+ *  |-----------------------------------------------------------| |--------------|
+ *  |      |    |    |    |    |    |    |    |    |    |       | |    |    |    |
+ *  |-----------------------------------------------------------| |--------------|
+ *  |        |    |    |    |    |    |    |    |    |    |     | |    |    |    |
+ *  |-----------------------------------------------------------| |--------------|
+ *  |      |    |      |         |             |     |    |     | |    |    |    |
+ *  `-----------------------------------------------------------' `--------------'
+ */
+
+#define LAYOUT( \
+K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
+K100, K101, K102, K103, K104, K105, K106, K107, K108, K109,       K111, K112, K113, K114, \
+K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
+K300, K301, K302,       K304,             K307,       K309, K310, K311, K312, K313, K314  \
+) { \
+{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
+{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  XXXX,  K111,  K112,  K113,  K114 }, \
+{ K200,  XXXX,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214 }, \
+{ K300,  K301,  K302,  XXXX,  K304,  XXXX,  XXXX,  K307,  XXXX,  K309,  K310,  K311,  K312,  K313,  K314 }  \
+}
+
+void the50_led_on(void);
+void the50_led_off(void);

keyboards/lets_split/sockets/config.h

@@ -85,3 +85,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
+
+#ifdef USE_Link_Time_Optimization
+  // LTO has issues with macros (action_get_macro) and "functions" (fn_actions),
+  //  so just disable them
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+
+  #define DISABLE_LEADER
+#endif // USE_Link_Time_Optimization

keyboards/lets_split/sockets/rules.mk

@@ -1,3 +1,5 @@
 BACKLIGHT_ENABLE = no
 AUDIO_ENABLE = yes
 RGBLIGHT_ENABLE = yes #Don't enable this along with I2C
+
+EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization

keyboards/lets_split_eh/keymaps/resfury/config.h

@@ -0,0 +1,23 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <[email protected]>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define EE_HANDS

keyboards/lets_split_eh/keymaps/resfury/keymap.c

@@ -0,0 +1,189 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+
+enum resfury_layers {
+  _COLEMAK,
+  _DVORAK,
+  _QWERTY
+};
+
+enum resfury_keycodes {
+  COLEMAK = SAFE_RANGE,
+  DVORAK,
+  QWERTY,
+};
+
+#define _LOWER 3
+#define _RAISE 4
+#define _FUNCTION 15
+#define _ADJUST 16
+
+#define LOWER     MO(_LOWER)
+#define RAISE     MO(_RAISE)
+#define FUNCTION  MO(_FUNCTION)
+#define ADJUST    MO(_ADJUST)
+
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  |   \  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |F/TAB |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |   '  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Shift |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  GUI | Alt  | Ent  |Lower | Bksp | Spc  | Raise| Left |  Up  | Down |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT( \
+  KC_ESC,               KC_Q,     KC_W,    KC_F,    KC_P,  KC_G,    KC_J,   KC_L,  KC_U,    KC_Y,    KC_SCLN, KC_BSLS,       \
+  LT(_FUNCTION,KC_TAB), KC_A,     KC_R,    KC_S,    KC_T,  KC_D,    KC_H,   KC_N,  KC_E,    KC_I,    KC_O,    KC_QUOT,       \
+  OSM(MOD_LSFT),        KC_Z,     KC_X,    KC_C,    KC_V,  KC_B,    KC_K,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, OSM(MOD_RSFT), \
+  KC_LCTL,              KC_LGUI,  KC_LALT, KC_ENT,  LOWER, KC_BSPC, KC_SPC, RAISE, KC_LEFT, KC_UP,   KC_DOWN, KC_RGHT        \
+),
+
+  /* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   '  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  |   /  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |F/TAB |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   R  |   L  |   -  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Shift |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  GUI | Alt  | Ent  |Lower | Bksp | Spc  | Raise| Left |  Up  | Down |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT( \
+  KC_ESC,               KC_QUOT,  KC_COMM, KC_DOT,  KC_P,  KC_Y,    KC_F,   KC_G,  KC_C,    KC_R,    KC_L,    KC_SLSH,       \
+  LT(_FUNCTION,KC_TAB), KC_A,     KC_O,    KC_E,    KC_U,  KC_I,    KC_D,   KC_H,  KC_T,    KC_N,    KC_S,    KC_MINS,       \
+  OSM(MOD_LSFT),        KC_SCLN,  KC_Q,    KC_J,    KC_K,  KC_X,    KC_B,   KC_M,  KC_W,    KC_V,    KC_Z,    OSM(MOD_RSFT), \
+  KC_LCTL,              KC_LGUI,  KC_LALT, KC_ENT,  LOWER, KC_BSPC, KC_SPC, RAISE, KC_LEFT, KC_UP,   KC_DOWN, KC_RGHT        \
+),
+
+
+ /* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |   \  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |F/TAB |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |   '  |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Shift |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  GUI | Alt  | Ent  |Lower | Bksp | Spc  | Raise| Left |  Up  | Down |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT( \
+  KC_ESC,               KC_Q,     KC_W,    KC_E,    KC_R,  KC_T,    KC_Y,   KC_U,  KC_I,    KC_O,    KC_P,    KC_BSLS,       \
+  LT(_FUNCTION,KC_TAB), KC_A,     KC_S,    KC_D,    KC_F,  KC_G,    KC_H,   KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,       \
+  OSM(MOD_LSFT),        KC_Z,     KC_X,    KC_C,    KC_V,  KC_B,    KC_N,   KC_M,  KC_COMM, KC_DOT,  KC_SLSH, OSM(MOD_RSFT), \
+  KC_LCTL,              KC_LGUI,  KC_LALT, KC_ENT,  LOWER, KC_BSPC, KC_SPC, RAISE, KC_LEFT, KC_UP,   KC_DOWN, KC_RGHT        \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |  ~   |  `   | Mute | Ctl/ |  |   |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |Lower | Bksp | Spc  |Adjust| Play | Vol+ | Vol- | Next |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT( \
+  KC_ESC,  KC_EXLM,  KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,   KC_ASTR, KC_LPRN, KC_RPRN,       KC_DEL,  \
+  _______, KC_F1,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,   KC_PLUS, KC_LCBR, KC_RCBR,       _______, \
+  _______, KC_F7,    KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_GRV), KC_GRV,  KC_MUTE, RCTL(KC_BSLS), KC_PIPE, \
+  _______, _______,  _______, _______, _______, KC_BSPC, KC_SPC,  ADJUST,    KC_MPLY, KC_VOLU, KC_VOLD,       KC_MNXT  \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |   4  |   5  |   6  |   +  |   -  |  +   |   -  |   =  |   [  |   ]  |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |   7  |   8  |   9  |   *  |   /  |  *   |   /  |   .  | Mute | Ctl/ |   \  |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |   ,  |   0  |  .   |Adjust| Bksp | Spc  |Raise | Play | Vol+ | Vol- | Next |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT( \
+  KC_ESC,  KC_1,    KC_2,  KC_3,   KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,          KC_DEL,  \
+  _______, KC_4,    KC_5,  KC_6,   KC_PLUS, KC_MINS, KC_PLUS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC,       _______, \
+  _______, KC_7,    KC_8,  KC_9,   KC_ASTR, KC_SLSH, KC_ASTR, KC_SLSH, KC_DOT,  KC_MUTE, RCTL(KC_BSLS), KC_BSLS, \
+  _______, KC_COMM, KC_0,  KC_DOT, ADJUST,  KC_BSPC, KC_SPC,  _______, KC_MPLY, KC_VOLU, KC_VOLD,       KC_MNXT  \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |Taskmg|      |      |      |      |      |      |      |RGBVAI|RGBSAI|RGBHUI|caltde|
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |_COLEMAK|    |      |      |      |      |      |      |RGBVAD|RGBSAD|RGBHUD|RGBTOG|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |_DVORAK|     |      |      |      |      |      |      |      |      |RGBMOD|BLSTEP|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |_QWERTY|     |      |      |      |      |      |      |      |      |      | RESET|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT( \
+  TSKMGR,       _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAI, RGB_HUI, CALTDEL, \
+  DF(_COLEMAK), _______, _______, _______, _______, _______, _______, _______, RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG, \
+  DF(_DVORAK),  _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, BL_STEP, \
+  DF(_QWERTY),  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET    \
+),
+
+/* Function
+ * ,-----------------------------------------------------------------------------------.
+ * | Caps |      |      |      |      |      | S(Hm)| Home |  Up  | End  |S(End)|      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      | Ctrl | Shift| Alt  |      |      |      | Left | Down |Right |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_FUNCTION] = LAYOUT( \
+  KC_CAPS, _______, _______, _______, _______, _______, S(KC_HOME), KC_HOME, KC_UP,   KC_END,  S(KC_END), _______, \
+  _______, KC_LCTL, KC_LSFT, KC_LALT, _______, _______, _______,    KC_LEFT, KC_DOWN, KC_RGHT, _______,   _______, \
+  _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______, _______,   _______, \
+  _______, _______, _______, _______, _______, _______, _______,    _______, _______, _______, _______,   _______  \
+)
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      return false;
+      break;
+
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/lets_split_eh/keymaps/resfury/readme.md

@@ -0,0 +1,7 @@
+![Let's Split Eh?](https://imgur.com/a/riUxwpl)
+
+# ResFury Let's Split, Eh Layout
+
+This layout specializes the Let's Split, Eh for Colevrak users that occasionally let others play with their toys. Adjust layer allows swapping to Colemak/Dvorak/Qwerty alphas. Heavily influenced by the default planck layout, but with up/down switched, a left hand 10-key, remapped backspace, and a few convenience keys.
+
+Master set by EE_HANDS method.

keyboards/lets_split_eh/keymaps/resfury/rules.mk

@@ -0,0 +1 @@
+RGBLIGHT_ENABLE = yes

keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c

@@ -0,0 +1,939 @@
+#include QMK_KEYBOARD_H
+
+// uint8_t keyboard_leds(void)
+#include <tmk_core/protocol/arm_atsam/main_arm_atsam.h>
+
+
+#if ISSI3733_LED_COUNT == 119
+#   define KEY_LED_COUNT 87
+#elif ISSI3733_LED_COUNT == 105
+#   define KEY_LED_COUNT 67
+#endif
+
+#define min(x, y) (x < y ? x : y)
+
+
+extern issi3733_led_t *lede;
+extern issi3733_led_t led_map[];
+extern led_disp_t disp;
+
+enum ctrl_keycodes {
+    L_BRI = SAFE_RANGE, //LED Brightness Increase
+    L_BRD,              //LED Brightness Decrease
+    L_PTN,              //LED Pattern Select Next
+    L_PTP,              //LED Pattern Select Previous
+    L_PSI,              //LED Pattern Speed Increase
+    L_PSD,              //LED Pattern Speed Decrease
+    L_T_MD,             //LED Toggle Mode
+    L_T_ONF,            //LED Toggle On / Off
+    L_ON,               //LED On
+    L_OFF,              //LED Off
+    L_T_BR,             //LED Toggle Breath Effect
+    L_T_PTD,            //LED Toggle Scrolling Pattern Direction
+    U_T_AUTO,           //USB Extra Port Toggle Auto Detect / Always Active
+    U_T_AGCR,           //USB Toggle Automatic GCR control
+    DBG_TOG,            //DEBUG Toggle On / Off
+    DBG_MTRX,           //DEBUG Toggle Matrix Prints
+    DBG_KBD,            //DEBUG Toggle Keyboard Prints
+    DBG_MOU,            //DEBUG Toggle Mouse Prints
+    MD_BOOT,            //Restart into bootloader after hold timeout
+    
+    L_SP_PR,            //LED Splash Pattern Select Previous
+    L_SP_NE,            //LED Splash Pattern Select Next
+
+    L_SP_WD,            //LED Splash Widen Wavefront width
+    L_SP_NW,            //LED Splash Narrow Wavefront width
+
+    L_SP_FA,            //LED Splash wave travel speed faster (shorter period)
+    L_SP_SL,            //LED Splash wave travel speed slower (longer period)
+
+    L_CP_PR,            //LED Color Pattern Select Previous
+    L_CP_NX,            //LEB Color Pattern Select Next
+};
+
+#define TG_NKRO MAGIC_TOGGLE_NKRO //Toggle 6KRO / NKRO mode
+#define ______ KC_TRNS
+
+keymap_config_t keymap_config;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS, \
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,   KC_INS,  KC_HOME, KC_PGUP, \
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,   KC_DEL,  KC_END,  KC_PGDN, \
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                              KC_UP, \
+        KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                             KC_RALT, MO(1),   KC_APP,  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RGHT \
+    ),
+    [1] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            KC_MUTE, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   KC_MPLY, KC_MSTP, KC_VOLU, \
+        L_T_BR,  L_PSD,   L_BRI,   L_PSI,   _______, _______, _______, U_T_AUTO,U_T_AGCR,_______, MO(2),   _______, _______, _______,   KC_MPRV, KC_MNXT, KC_VOLD, \
+        L_T_PTD, L_PTP,   L_BRD,   L_PTN,   _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+        _______, L_T_MD,  L_T_ONF, _______, _______, MD_BOOT, TG_NKRO, _______, _______, _______, _______, _______,                              _______, \
+        _______, _______, _______,                   _______,                            _______, _______, _______, _______,            _______, _______, _______ \
+    ),
+    [2] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______, _______, \
+        L_CP_NX, L_SP_SL, L_SP_WD, L_SP_FA, _______, _______, L_CP_NX, L_SP_SL, L_SP_WD, L_SP_FA, _______, _______, _______, _______,   _______, _______, _______, \
+        L_CP_PR, L_SP_PR, L_SP_NW, L_SP_NE, _______, _______, L_CP_PR, L_SP_PR, L_SP_NW, L_SP_NE, _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______,                              _______, \
+        _______, _______, _______,                   _______,                            _______, _______, _______, _______,            _______, _______, _______ \
+    ),
+    /*
+    [X] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+        _______, _______, _______, _______, _______, _______, TG_NKRO, _______, _______, _______, _______, _______,                              _______, \
+        _______, _______, _______,                   _______,                            _______, _______, _______, _______,            _______, _______, _______ \
+    ),
+    */
+};
+
+// see: /tmk_core/common/keycode.h
+uint8_t KEYCODE_TO_LED_ID[256];
+uint8_t DISTANCE_MAP[KEY_LED_COUNT+1][KEY_LED_COUNT+1];
+struct user_led_t {
+    uint8_t state;
+    uint8_t r;
+    uint8_t g;
+    uint8_t b;
+} USER_LED[KEY_LED_COUNT] = {
+
+};
+
+struct {
+    uint8_t PATTERN_INDEX;
+    uint8_t WAVE_FRONT_WIDTH;
+    uint16_t WAVE_PERIOD;
+    uint8_t COLOR_PATTERN_INDEX;
+    uint8_t TRAVEL_DISTANCE;
+} USER_CONFIG = {
+    .PATTERN_INDEX = 1,
+    .WAVE_FRONT_WIDTH = 3,
+    .WAVE_PERIOD = 50,
+    .COLOR_PATTERN_INDEX = 0,
+    .TRAVEL_DISTANCE = 25,
+};
+
+uint8_t ktli(uint16_t keycode){
+    if(keycode < 256){
+        // the array is initialized in `matrix_init_user()`
+        return KEYCODE_TO_LED_ID[keycode];
+    }
+    switch(keycode){
+    // definition of MO(layer): quantum/quantum_keycodes.h: line 614
+    case MO(1): return 82;
+    }
+    return 0;
+};
+
+// Runs just one time when the keyboard initializes.
+static void init_keycode_to_led_map(void){
+    uint16_t LED_MAP[MATRIX_ROWS][MATRIX_COLS] = LAYOUT(
+            1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,
+            20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,
+            36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,
+            52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,
+#if KEY_LED_COUNT >= 87
+            68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87
+#endif
+    );
+
+    uint16_t key = 0;
+    for(uint8_t y = 0; y < MATRIX_ROWS; ++y){
+        for(uint8_t x = 0; x < MATRIX_COLS; ++x){
+            key = keymaps[0][y][x];
+            if(key < 256){
+                KEYCODE_TO_LED_ID[key] = LED_MAP[y][x];
+            }
+        }
+    }
+}
+// https://docs.qmk.fm/#/feature_terminal
+#define KEY_POSITION_MAP_ROWS 6
+#define KEY_POSITION_MAP_COLUMNS 20
+static void init_distance_map(void){
+    uint16_t KEY_POSITION_MAP[KEY_POSITION_MAP_ROWS][KEY_POSITION_MAP_COLUMNS] = {
+        { KC_NO,   KC_ESC,  KC_NO,   KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_NO,  KC_F5,  KC_F6,   KC_F7,  KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,  KC_NO,   KC_PSCR, KC_SLCK, KC_PAUS,  },
+        // { KC_NO,   KC_NO,   KC_NO,   KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,  KC_NO,   KC_NO,  KC_NO,   KC_NO,    KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,   KC_NO,    },
+        { KC_NO,   KC_GRV,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,   KC_0,    KC_MINS,  KC_EQL,  KC_BSPC, KC_BSPC, KC_NO,   KC_INS,  KC_HOME, KC_PGUP,  },
+        { KC_NO,   KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,   KC_P,    KC_LBRC,  KC_RBRC, KC_BSLS, KC_BSLS, KC_NO,   KC_DEL,  KC_END,  KC_PGDN,  },
+        { KC_NO,   KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,   KC_SCLN, KC_QUOT,  KC_ENT,  KC_ENT,  KC_ENT,  KC_NO,   KC_NO,   KC_NO,   KC_NO,    },
+        { KC_NO,   KC_LSFT, KC_Z,    KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,  KC_RSFT, KC_RSFT, KC_RSFT, KC_NO,   KC_NO,   KC_UP,   KC_NO,    },
+        { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_NO,  MO(1),   KC_APP,   KC_RCTL, KC_RCTL, KC_RCTL, KC_NO,   KC_LEFT, KC_DOWN, KC_RIGHT, },
+    };
+    uint8_t columns = KEY_POSITION_MAP_COLUMNS;
+    uint8_t rows = KEY_POSITION_MAP_ROWS;
+
+    for(uint8_t y = 0; y < rows; ++y){
+        for(uint8_t x = 0; x < columns; ++x){
+            uint8_t id1 = ktli(KEY_POSITION_MAP[y][x]);
+
+            for(uint8_t j = y; j < rows; ++j){
+                for(uint8_t i = 0; i < columns; ++i){
+                    uint8_t id2 = ktli(KEY_POSITION_MAP[j][i]);
+
+                    if(id1 == id2) continue;
+                    
+                    uint8_t dx = abs(i - x);
+                    uint8_t dy = abs(j - y);
+                    uint8_t dis = dx + dy;
+                    if(i < x && j > y){
+                        dis -= min(dx, dy);
+                    }
+
+                    uint8_t _dis = DISTANCE_MAP[id1][id2];
+                    if(_dis && _dis <= dis) continue;
+                    DISTANCE_MAP[id1][id2] = dis;
+                    DISTANCE_MAP[id2][id1] = dis;
+                }
+            }
+        }
+    }
+}
+void matrix_init_user(void) {
+    init_keycode_to_led_map();
+    init_distance_map();
+};
+
+// /tmk_core/protocol/arm_atsam/led_matrix.c: line 244
+uint8_t led_enabled;
+float led_animation_speed;
+uint8_t led_animation_direction;
+uint8_t led_animation_orientation;
+uint8_t led_animation_breathing;
+uint8_t led_animation_breathe_cur;
+uint8_t breathe_step;
+uint8_t breathe_dir;
+uint64_t led_next_run;
+
+uint8_t led_animation_id;
+uint8_t led_lighting_mode;
+
+issi3733_led_t *led_cur;
+uint8_t led_per_run;
+float breathe_mult;
+
+// overrided /tmk_core/protocol/arm_atsam/led_matrix.c: line 484
+void rgb_matrix_init_user(void){
+    led_animation_speed = ANIMATION_SPEED_STEP * 15;
+    led_per_run = 15;
+}
+
+// overrided /tmk_core/protocol/arm_atsam/led_matrix.c: line 262
+void led_matrix_run(void)
+{
+    float ro;
+    float go;
+    float bo;
+    float po;
+    uint8_t led_this_run = 0;
+    led_setup_t *f = (led_setup_t*)led_setups[led_animation_id];
+
+    if (led_cur == 0) //Denotes start of new processing cycle in the case of chunked processing
+    {
+        led_cur = led_map;
+
+        disp.frame += 1;
+
+        breathe_mult = 1;
+
+        if (led_animation_breathing)
+        {
+            led_animation_breathe_cur += breathe_step * breathe_dir;
+
+            if (led_animation_breathe_cur >= BREATHE_MAX_STEP)
+                breathe_dir = -1;
+            else if (led_animation_breathe_cur <= BREATHE_MIN_STEP)
+                breathe_dir = 1;
+
+            //Brightness curve created for 256 steps, 0 - ~98%
+            breathe_mult = 0.000015 * led_animation_breathe_cur * led_animation_breathe_cur;
+            if (breathe_mult > 1) breathe_mult = 1;
+            else if (breathe_mult < 0) breathe_mult = 0;
+        }
+    }
+
+    uint8_t fcur = 0;
+    uint8_t fmax = 0;
+
+    //Frames setup
+    while (f[fcur].end != 1)
+    {
+        fcur++; //Count frames
+    }
+
+    fmax = fcur; //Store total frames count
+
+    struct user_led_t user_led_cur;
+    while (led_cur < lede && led_this_run < led_per_run)
+    {
+        ro = 0;
+        go = 0;
+        bo = 0;
+
+        uint8_t led_index = led_cur - led_map;                  // only this part differs from the original function.
+        if(led_index < KEY_LED_COUNT){                          // 
+            user_led_cur = USER_LED[led_index];                 // `struct user_led_t USER_LED[]` is stored globally.
+        }                                                       // 
+                                                                // 
+        if(led_index < KEY_LED_COUNT && user_led_cur.state){    // `user_led_cur` is just for convenience
+            ro = user_led_cur.r;                                // 
+            go = user_led_cur.g;                                // 
+            bo = user_led_cur.b;                                // 
+        }                                                       // 
+        else if (led_lighting_mode == LED_MODE_KEYS_ONLY && led_cur->scan == 255)
+        {
+            //Do not act on this LED
+        }
+        else if (led_lighting_mode == LED_MODE_NON_KEYS_ONLY && led_cur->scan != 255)
+        {
+            //Do not act on this LED
+        }
+        else if (led_lighting_mode == LED_MODE_INDICATORS_ONLY)
+        {
+            //Do not act on this LED (Only show indicators)
+        }
+        else
+        {
+            //Act on LED
+            for (fcur = 0; fcur < fmax; fcur++)
+            {
+
+                if (led_animation_orientation)
+                {
+                  po = led_cur->py;
+                }
+                else
+                {
+                  po = led_cur->px;
+                }
+
+                float pomod;
+                pomod = (float)(disp.frame % (uint32_t)(1000.0f / led_animation_speed)) / 10.0f * led_animation_speed;
+
+                //Add in any moving effects
+                if ((!led_animation_direction && f[fcur].ef & EF_SCR_R) || (led_animation_direction && (f[fcur].ef & EF_SCR_L)))
+                {
+                    pomod *= 100.0f;
+                    pomod = (uint32_t)pomod % 10000;
+                    pomod /= 100.0f;
+
+                    po -= pomod;
+
+                    if (po > 100) po -= 100;
+                    else if (po < 0) po += 100;
+                }
+                else if ((!led_animation_direction && f[fcur].ef & EF_SCR_L) || (led_animation_direction && (f[fcur].ef & EF_SCR_R)))
+                {
+                    pomod *= 100.0f;
+                    pomod = (uint32_t)pomod % 10000;
+                    pomod /= 100.0f;
+                    po += pomod;
+
+                    if (po > 100) po -= 100;
+                    else if (po < 0) po += 100;
+                }
+
+                //Check if LED's po is in current frame
+                if (po < f[fcur].hs) continue;
+                if (po > f[fcur].he) continue;
+                //note: < 0 or > 100 continue
+
+                //Calculate the po within the start-stop percentage for color blending
+                po = (po - f[fcur].hs) / (f[fcur].he - f[fcur].hs);
+
+                //Add in any color effects
+                if (f[fcur].ef & EF_OVER)
+                {
+                    ro = (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5;
+                    go = (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5;
+                    bo = (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5;
+                }
+                else if (f[fcur].ef & EF_SUBTRACT)
+                {
+                    ro -= (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5;
+                    go -= (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5;
+                    bo -= (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5;
+                }
+                else
+                {
+                    ro += (po * (f[fcur].re - f[fcur].rs)) + f[fcur].rs;// + 0.5;
+                    go += (po * (f[fcur].ge - f[fcur].gs)) + f[fcur].gs;// + 0.5;
+                    bo += (po * (f[fcur].be - f[fcur].bs)) + f[fcur].bs;// + 0.5;
+                }
+            }
+        }
+
+        //Clamp values 0-255
+        if (ro > 255) ro = 255; else if (ro < 0) ro = 0;
+        if (go > 255) go = 255; else if (go < 0) go = 0;
+        if (bo > 255) bo = 255; else if (bo < 0) bo = 0;
+
+        if (led_animation_breathing)
+        {
+            ro *= breathe_mult;
+            go *= breathe_mult;
+            bo *= breathe_mult;
+        }
+
+        *led_cur->rgb.r = (uint8_t)ro;
+        *led_cur->rgb.g = (uint8_t)go;
+        *led_cur->rgb.b = (uint8_t)bo;
+
+#ifdef USB_LED_INDICATOR_ENABLE
+        if (keyboard_leds())
+        {
+            uint8_t kbled = keyboard_leds();
+            if (
+                #if USB_LED_NUM_LOCK_SCANCODE != 255
+                (led_cur->scan == USB_LED_NUM_LOCK_SCANCODE && kbled & (1<<USB_LED_NUM_LOCK)) ||
+                #endif //NUM LOCK
+                #if USB_LED_CAPS_LOCK_SCANCODE != 255
+                (led_cur->scan == USB_LED_CAPS_LOCK_SCANCODE && kbled & (1<<USB_LED_CAPS_LOCK)) ||
+                #endif //CAPS LOCK
+                #if USB_LED_SCROLL_LOCK_SCANCODE != 255
+                (led_cur->scan == USB_LED_SCROLL_LOCK_SCANCODE && kbled & (1<<USB_LED_SCROLL_LOCK)) ||
+                #endif //SCROLL LOCK
+                #if USB_LED_COMPOSE_SCANCODE != 255
+                (led_cur->scan == USB_LED_COMPOSE_SCANCODE && kbled & (1<<USB_LED_COMPOSE)) ||
+                #endif //COMPOSE
+                #if USB_LED_KANA_SCANCODE != 255
+                (led_cur->scan == USB_LED_KANA_SCANCODE && kbled & (1<<USB_LED_KANA)) ||
+                #endif //KANA
+                (0))
+            {
+                if (*led_cur->rgb.r > 127) *led_cur->rgb.r = 0;
+                else *led_cur->rgb.r = 255;
+                if (*led_cur->rgb.g > 127) *led_cur->rgb.g = 0;
+                else *led_cur->rgb.g = 255;
+                if (*led_cur->rgb.b > 127) *led_cur->rgb.b = 0;
+                else *led_cur->rgb.b = 255;
+            }
+        }
+#endif //USB_LED_INDICATOR_ENABLE
+
+        led_cur++;
+        led_this_run++;
+    }
+}
+
+#define KEY_STROKES_LENGTH 20
+struct {
+    bool alive;
+    uint8_t led_id;
+    uint32_t time;
+} KEY_STROKES[KEY_STROKES_LENGTH] = {{}};
+
+
+
+
+void set_led_rgb(uint8_t led_id, uint8_t r, uint8_t g, uint8_t b){
+    issi3733_led_t *target_led = (led_map + led_id);
+    *target_led->rgb.r = r;
+    *target_led->rgb.g = g;
+    *target_led->rgb.b = b;
+}
+
+
+uint8_t DISTANCE_FROM_LAST_KEYSTROKE[KEY_LED_COUNT+1];
+void calculate_keystroke_distance(void){
+    bool alive;
+    uint8_t led_id, period_passed;
+    uint32_t t;
+
+
+    for(uint8_t i = 0; i <= KEY_LED_COUNT; ++i){
+        DISTANCE_FROM_LAST_KEYSTROKE[i] = 0;
+    }
+
+    for(uint8_t i = 0; i < KEY_STROKES_LENGTH; ++i){
+        if(KEY_STROKES[i].alive){
+            t = timer_elapsed32(KEY_STROKES[i].time);
+            alive = 0;
+            led_id = KEY_STROKES[i].led_id;
+            period_passed = t / USER_CONFIG.WAVE_PERIOD;
+
+            uint8_t delta_period;
+            for(uint8_t j = 1; j <= KEY_LED_COUNT; ++j){
+                delta_period = period_passed - DISTANCE_MAP[led_id][j];
+                if(( delta_period < USER_CONFIG.WAVE_FRONT_WIDTH) && (
+                    DISTANCE_MAP[led_id][j] <= USER_CONFIG.TRAVEL_DISTANCE
+                )){
+                    switch(USER_CONFIG.PATTERN_INDEX){
+                    case 3:
+                    case 4:
+                    case 5:
+                    case 6:
+                        DISTANCE_FROM_LAST_KEYSTROKE[j] += delta_period;
+                        break;
+                    default:
+                        DISTANCE_FROM_LAST_KEYSTROKE[j] = 1;
+                        break;
+                    }
+                    alive = 1;
+                }
+            }
+            KEY_STROKES[i].alive = alive;
+        }
+    }
+}
+
+#define COLOR_PATTERN_RGB_COUNT 18
+static uint8_t COLOR_PATTERNS[][COLOR_PATTERN_RGB_COUNT][3] = {
+    { // default rainbow color
+        {255,   0,   0}, {255,   0,   0}, {255, 127,   0},
+        {255, 127,   0}, {255, 255,   0}, {255, 255,   0},
+        {120, 255,   0}, {120, 255,   0}, {  0, 255,   0},
+        {  0, 255,   0}, {  0, 255, 120}, {  0, 255, 120},
+        {  0,   0, 255}, {  0,   0, 255}, { 75,   0, 130},
+        { 75,   0, 130}, { 43,   0, 130}, { 43,   0, 130},
+    }, { // light rainbow color
+        {248,  12,  18}, {238,  17,   0}, {255,  51,  17},
+        {255,  68,  32}, {255, 102,  68}, {255, 153,  51},
+        {254, 174,  45}, {204, 187,  51}, {208, 195,  16},
+        {170, 204,  34}, {105, 208,  37}, { 34, 204, 170},
+        { 18, 189, 185}, { 17, 170, 187}, { 68,  68, 221},
+        { 51,  17, 187}, { 59,  12, 189}, { 68,  34, 153},
+    }, { // white flat
+        {255, 255, 255}, {255, 255, 255}, {255, 255, 255},
+        {255, 255, 255}, {255, 255, 255}, {255, 255, 255},
+        {255, 255, 255}, {255, 255, 255}, {255, 255, 255},
+        {255, 255, 255}, {255, 255, 255}, {255, 255, 255},
+        {255, 255, 255}, {255, 255, 255}, {255, 255, 255},
+        {255, 255, 255}, {255, 255, 255}, {255, 255, 255},
+    }, { // white fade, cos curve
+        {255, 255, 255}, {255, 255, 255}, {252, 252, 252},
+        {247, 247, 247}, {240, 240, 240}, {232, 232, 232},
+        {221, 221, 221}, {209, 209, 209}, {196, 196, 196},
+        {181, 181, 181}, {164, 164, 164}, {147, 147, 147},
+        {128, 128, 128}, {108, 108, 108}, { 88,  88,  88},
+        { 66,  66,  66}, { 45,  45,  45}, { 23,  23,  23},
+    }, 
+};
+static const uint8_t COLOR_PATTERNS_COUNT = (
+        sizeof(COLOR_PATTERNS) / sizeof(COLOR_PATTERNS[0]));
+
+void set_user_led_rgb(uint8_t i, uint8_t r, uint8_t g, uint8_t b){
+    USER_LED[i-1].state = 1;
+    USER_LED[i-1].r = r;
+    USER_LED[i-1].g = g;
+    USER_LED[i-1].b = b;
+}
+void unset_user_led_rgb(uint8_t i){
+    USER_LED[i-1].state = 0;
+}
+void set_indicator_led_rgb(uint8_t i,
+        uint8_t layer, uint8_t r, uint8_t g, uint8_t b){
+    USER_LED[i-1].state |= 1 << layer;
+    USER_LED[i-1].r = r;
+    USER_LED[i-1].g = g;
+    USER_LED[i-1].b = b;
+}
+void unset_indicator_led_rgb(uint8_t i, uint8_t layer){
+    USER_LED[i-1].state &= ~(1 << layer);
+}
+
+void refresh_pattern_indicators(void){
+    static uint8_t GRV_123456[] = {
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6,
+    };
+
+    if(layer_state >= 0x04){
+        for(uint8_t i = 0; i < 7; ++i){
+            if(i == USER_CONFIG.PATTERN_INDEX){
+                set_indicator_led_rgb(ktli(GRV_123456[i]), 2, 0, 0, 255);
+            } else{
+                set_indicator_led_rgb(ktli(GRV_123456[i]), 2, 0, 255, 0);
+            }
+        }
+    } else{
+        for(uint8_t i = 0; i < 7; ++i){
+            unset_indicator_led_rgb(ktli(GRV_123456[i]), 2);
+        }
+    }
+}
+void refresh_color_pattern_indicators(void){
+    static uint8_t ZXCVBNM_COMM_DOT[] = {
+        KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,
+    };
+    
+    if(layer_state >= 0x04){
+        uint8_t (*c)[3] = &COLOR_PATTERNS[USER_CONFIG.COLOR_PATTERN_INDEX][0];
+        for(uint8_t i = 0; i < 9; ++i){
+            set_indicator_led_rgb(ktli(ZXCVBNM_COMM_DOT[i]),
+                    2, c[i][0], c[i][1], c[i][2]);
+        }
+    } else{
+        for(uint8_t i = 0; i < 9; ++i){
+            unset_indicator_led_rgb(ktli(ZXCVBNM_COMM_DOT[i]), 2);
+        }
+    }
+}
+
+// Runs constantly in the background, in a loop.
+void matrix_scan_user(void) {
+    static uint32_t scan_timer = 0;
+    static uint8_t last_layer = 0;
+
+    uint8_t layer = 0;
+    if(layer_state >= 0x04){
+        layer = 2;
+    } else if(layer_state >= 0x02){
+        layer = 1;
+    }
+
+    calculate_keystroke_distance();
+
+    
+    #define USE_PATTERN 0
+    #define BLACK_RGB 1
+    #define COLOR_RGB 2
+    uint8_t ci; // color index
+    uint8_t *rgb;
+    uint8_t handle_type;
+    uint8_t distance;
+    for(uint8_t i = 1; i <= KEY_LED_COUNT; ++i){
+        if(USER_LED[i-1].state >= 2) continue;
+        
+        handle_type = USE_PATTERN;
+        distance = DISTANCE_FROM_LAST_KEYSTROKE[i];
+
+        switch(USER_CONFIG.PATTERN_INDEX){
+        case 0: handle_type = USE_PATTERN; break;
+        case 1: handle_type = distance ? USE_PATTERN : BLACK_RGB; break;
+        case 2: handle_type = distance ? BLACK_RGB : USE_PATTERN; break;
+        case 3: handle_type = distance ? COLOR_RGB : BLACK_RGB; break;
+        case 4: handle_type = distance ? COLOR_RGB : USE_PATTERN; break;
+        case 5:
+        case 6: handle_type = distance ? COLOR_RGB : USE_PATTERN; break;
+        }
+        switch(handle_type){
+        case USE_PATTERN: unset_user_led_rgb(i); break;
+        case BLACK_RGB: set_user_led_rgb(i, 0, 0, 0); break;
+        case COLOR_RGB:
+            ci = (DISTANCE_FROM_LAST_KEYSTROKE[i] * COLOR_PATTERN_RGB_COUNT /
+                    USER_CONFIG.WAVE_FRONT_WIDTH) % COLOR_PATTERN_RGB_COUNT;
+            rgb = &COLOR_PATTERNS[USER_CONFIG.COLOR_PATTERN_INDEX][ci][0];
+
+            set_user_led_rgb(i, rgb[0], rgb[1], rgb[2]);
+            break;
+        }
+    }
+
+
+    // could be moved to process_record_user()
+    if(layer != last_layer){
+
+        static uint8_t QWEASDP[] = {
+            KC_Q, KC_W, KC_E, KC_A, KC_S, KC_D, KC_P,
+        };
+        static uint8_t YUIOHJKL[] = {
+            KC_Y, KC_U, KC_I, KC_O, KC_H, KC_J, KC_K, KC_L,
+        };
+
+        switch(last_layer){
+        case 1:
+            for(uint8_t i = 0; i < 7; ++i){
+                unset_indicator_led_rgb(ktli(QWEASDP[i]), 1);
+            }
+            break;
+        case 2:
+            for(uint8_t i = 0; i < 6; ++i){
+                unset_indicator_led_rgb(ktli(QWEASDP[i]), 2);
+            }
+            for(uint8_t i = 0; i < 8; ++i){
+                unset_indicator_led_rgb(ktli(YUIOHJKL[i]), 2);
+            }
+            unset_indicator_led_rgb(ktli(KC_TAB), 2);
+            unset_indicator_led_rgb(ktli(KC_CAPS), 2);
+            break;
+        }
+
+
+        switch(layer){
+        case 1:
+            for(uint8_t i = 0; i < 7; ++i){
+                set_indicator_led_rgb(ktli(QWEASDP[i]), 1, 255, 0, 0);
+            }
+            break;
+        case 2:
+            for(uint8_t i = 0; i < 6; ++i){
+                set_indicator_led_rgb(ktli(QWEASDP[i]), 2, 0, 255, 0);
+            }
+            for(uint8_t i = 0; i < 8; ++i){
+                set_indicator_led_rgb(ktli(YUIOHJKL[i]), 2, 0, 255, 0);
+            }
+            set_indicator_led_rgb(ktli(KC_TAB), 2, 0, 255, 0);
+            set_indicator_led_rgb(ktli(KC_CAPS), 2, 0, 255, 0);
+            break;
+        }
+
+        refresh_pattern_indicators();
+        refresh_color_pattern_indicators();
+        last_layer = layer;
+    }
+
+
+    switch(layer){
+    case 0:
+        if(timer_elapsed32(scan_timer) > 2000){
+            scan_timer = timer_read32();
+        } else if(timer_elapsed32(scan_timer) > 1000){
+            // set_user_led_rgb(ktli(KC_F5), 255, 255, 255);
+        }
+        break;
+    case 1:
+        break;
+    case 2:
+        break;
+    }
+
+};
+
+#define MODS_SHIFT  (keyboard_report->mods & MOD_BIT(KC_LSHIFT) || keyboard_report->mods & MOD_BIT(KC_RSHIFT))
+#define MODS_CTRL  (keyboard_report->mods & MOD_BIT(KC_LCTL) || keyboard_report->mods & MOD_BIT(KC_RCTRL))
+#define MODS_ALT  (keyboard_report->mods & MOD_BIT(KC_LALT) || keyboard_report->mods & MOD_BIT(KC_RALT))
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    static uint32_t key_timer;
+
+
+    switch (keycode) {
+        case L_BRI:
+            if (record->event.pressed) {
+                if (LED_GCR_STEP > LED_GCR_MAX - gcr_desired) gcr_desired = LED_GCR_MAX;
+                else gcr_desired += LED_GCR_STEP;
+                if (led_animation_breathing) gcr_breathe = gcr_desired;
+            }
+            return false;
+        case L_BRD:
+            if (record->event.pressed) {
+                if (LED_GCR_STEP > gcr_desired) gcr_desired = 0;
+                else gcr_desired -= LED_GCR_STEP;
+                if (led_animation_breathing) gcr_breathe = gcr_desired;
+            }
+            return false;
+        case L_PTN:
+            if (record->event.pressed) {
+                if (led_animation_id == led_setups_count - 1) led_animation_id = 0;
+                else led_animation_id++;
+            }
+            return false;
+        case L_PTP:
+            if (record->event.pressed) {
+                if (led_animation_id == 0) led_animation_id = led_setups_count - 1;
+                else led_animation_id--;
+            }
+            return false;
+        case L_PSI:
+            if (record->event.pressed) {
+                led_animation_speed += ANIMATION_SPEED_STEP;
+            }
+            return false;
+        case L_PSD:
+            if (record->event.pressed) {
+                led_animation_speed -= ANIMATION_SPEED_STEP;
+                if (led_animation_speed < 0) led_animation_speed = 0;
+            }
+            return false;
+        case L_T_MD:
+            if (record->event.pressed) {
+                led_lighting_mode++;
+                if (led_lighting_mode > LED_MODE_MAX_INDEX) led_lighting_mode = LED_MODE_NORMAL;
+            }
+            return false;
+        case L_T_ONF:
+            if (record->event.pressed) {
+                led_enabled = !led_enabled;
+                I2C3733_Control_Set(led_enabled);
+            }
+            return false;
+        case L_ON:
+            if (record->event.pressed) {
+                led_enabled = 1;
+                I2C3733_Control_Set(led_enabled);
+            }
+            return false;
+        case L_OFF:
+            if (record->event.pressed) {
+                led_enabled = 0;
+                I2C3733_Control_Set(led_enabled);
+            }
+            return false;
+        case L_T_BR:
+            if (record->event.pressed) {
+                led_animation_breathing = !led_animation_breathing;
+                if (led_animation_breathing) {
+                    gcr_breathe = gcr_desired;
+                    led_animation_breathe_cur = BREATHE_MIN_STEP;
+                    breathe_dir = 1;
+                }
+            }
+            return false;
+        case L_T_PTD:
+            if (record->event.pressed) {
+                led_animation_direction = !led_animation_direction;
+            }
+            return false;
+        case U_T_AUTO:
+            if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
+                TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode");
+            }
+            return false;
+        case U_T_AGCR:
+            if (record->event.pressed && MODS_SHIFT && MODS_CTRL) {
+                TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode");
+            }
+            return false;
+        case DBG_TOG:
+            if (record->event.pressed) {
+                TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode");
+            }
+            return false;
+        case DBG_MTRX:
+            if (record->event.pressed) {
+                TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix");
+            }
+            return false;
+        case DBG_KBD:
+            if (record->event.pressed) {
+                TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard");
+            }
+            return false;
+        case DBG_MOU:
+            if (record->event.pressed) {
+                TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse");
+            }
+            return false;
+        case MD_BOOT:
+            if (record->event.pressed) {
+                key_timer = timer_read32();
+            } else {
+                if (timer_elapsed32(key_timer) >= 500) {
+                    reset_keyboard();
+                }
+            }
+            return false;
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+            
+        case L_SP_PR: // previous dripple pattern
+        case L_SP_NE: // next dripple pattern
+            if (record->event.pressed) {
+#define PATTERN_COUNT 7
+                uint8_t incre = keycode == L_SP_PR ? PATTERN_COUNT-1 : 1;
+                USER_CONFIG.PATTERN_INDEX += incre;
+                USER_CONFIG.PATTERN_INDEX %= PATTERN_COUNT;
+
+                if(USER_CONFIG.PATTERN_INDEX <= 4){
+                    USER_CONFIG.TRAVEL_DISTANCE = 25;
+                    USER_CONFIG.COLOR_PATTERN_INDEX = 0;
+                    USER_CONFIG.WAVE_PERIOD = 50;
+                }
+
+                switch(USER_CONFIG.PATTERN_INDEX){
+                case 0: // None
+                    break;
+                case 1: // background off, wave on
+                    USER_CONFIG.WAVE_FRONT_WIDTH = 2;
+                    break;
+                case 2: // background on, wave off
+                    USER_CONFIG.WAVE_FRONT_WIDTH = 5;
+                    break;
+                case 3: // background off, rainbow wave
+                    USER_CONFIG.WAVE_FRONT_WIDTH = 10;
+                    break;
+                case 4: // background on, rainbow wave
+                    USER_CONFIG.WAVE_FRONT_WIDTH = 10;
+                    break;
+                case 5:
+                    USER_CONFIG.WAVE_FRONT_WIDTH = 10;
+
+                    USER_CONFIG.COLOR_PATTERN_INDEX = 2;
+                    USER_CONFIG.TRAVEL_DISTANCE = 0;
+                    USER_CONFIG.WAVE_PERIOD = 100;
+                    break;
+                case 6:
+                    USER_CONFIG.WAVE_FRONT_WIDTH = 25;
+
+                    USER_CONFIG.COLOR_PATTERN_INDEX = 3;
+                    USER_CONFIG.TRAVEL_DISTANCE = 2;
+                    USER_CONFIG.WAVE_PERIOD = 10;
+                    break;
+                }
+                
+                // remove effect after changing pattern
+                for(int i = 0; i < KEY_STROKES_LENGTH; ++i){
+                    KEY_STROKES[i].alive = 0;
+                }
+                refresh_pattern_indicators();
+                refresh_color_pattern_indicators();
+            }
+            return false;
+        case L_SP_WD:
+        case L_SP_NW:
+            if(record->event.pressed){
+                short incre = keycode == L_SP_WD ? 1 : -1;
+                USER_CONFIG.WAVE_FRONT_WIDTH += incre;
+                if(USER_CONFIG.WAVE_FRONT_WIDTH < 1){
+                    USER_CONFIG.WAVE_FRONT_WIDTH = 1;
+                }
+            }
+            return false;
+        case L_SP_FA:
+        case L_SP_SL:
+            if(record->event.pressed){
+                short incre = keycode == L_SP_FA ? -1 : 1;
+                
+                USER_CONFIG.WAVE_PERIOD += 10 * incre;
+                if(USER_CONFIG.WAVE_PERIOD < 10){
+                    USER_CONFIG.WAVE_PERIOD = 10;
+                }
+            }
+            return false;
+        // these are the keys not in range 0x04 - 0x52
+        case L_CP_PR:
+        case L_CP_NX:
+            if(record->event.pressed){
+                uint8_t incre = keycode == L_CP_PR ? COLOR_PATTERNS_COUNT - 1 : 1;
+                USER_CONFIG.COLOR_PATTERN_INDEX += incre;
+                USER_CONFIG.COLOR_PATTERN_INDEX %= COLOR_PATTERNS_COUNT;
+                refresh_color_pattern_indicators();
+            }
+            return false;
+        default:
+            if (record->event.pressed){
+                uint8_t led_id = ktli(keycode);
+                if(led_id){
+                    for(int i = 0; i < KEY_STROKES_LENGTH; ++i){
+                        if(!KEY_STROKES[i].alive){
+                            KEY_STROKES[i].alive = 1;
+                            KEY_STROKES[i].led_id = led_id;
+                            KEY_STROKES[i].time = timer_read32();
+                            break;
+                        }
+                    }
+                }
+            }
+            return true; //Process all other keycodes normally
+    }
+}

keyboards/miniaxe/config.h

@@ -44,8 +44,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 // #define MATRIX_ROW_PINS { D0, D5 }
 // #define MATRIX_COL_PINS { F1, F0, B0 }
-#define NO_PIN 0xFF
+#define DIRECT_PINS { \
-#define MATRIX_ROW_COL_PINS { \
     { F1, E6, B0, B2, B3 }, \
     { F5, F0, B1, B7, D2 }, \
     { F6, F7, C7, D5, D3 }, \
@@ -54,7 +53,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define UNUSED_PINS
 
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
-#define DIODE_DIRECTION CUSTOM_MATRIX
+//#define DIODE_DIRECTION CUSTOM_MATRIX
 
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING

keyboards/miniaxe/matrix.c

@@ -1,641 +0,0 @@
-/*
-Copyright 2012 Jun Wako <[email protected]>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "pro_micro.h"
-#include "config.h"
-#include "timer.h"
-#include "split_flags.h"
-
-#ifdef BACKLIGHT_ENABLE
-#   include "backlight.h"
-    extern backlight_config_t backlight_config;
-#endif
-
-#if defined(USE_I2C) || defined(EH)
-#  include "i2c.h"
-#else // USE_SERIAL
-#  include "serial.h"
-#endif
-
-#ifndef DEBOUNCING_DELAY
-#   define DEBOUNCING_DELAY 5
-#endif
-
-#if (DEBOUNCING_DELAY > 0)
-    static uint16_t debouncing_time;
-    static bool debouncing = false;
-#endif
-
-#if defined(USE_I2C) || defined(EH)
-
-#if (MATRIX_COLS <= 8)
-#    define print_matrix_header()  print("\nr/c 01234567\n")
-#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop(matrix[i])
-#    define ROW_SHIFTER ((uint8_t)1)
-#else
-#    error "Currently only supports 8 COLS"
-#endif
-
-#else // USE_SERIAL
-
-#if (MATRIX_COLS <= 8)
-#    define print_matrix_header()  print("\nr/c 01234567\n")
-#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop(matrix[i])
-#    define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
-#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop16(matrix[i])
-#    define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop32(matrix[i])
-#    define ROW_SHIFTER  ((uint32_t)1)
-#endif
-
-#endif
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-#define ERROR_DISCONNECT_COUNT 5
-
-#define ROWS_PER_HAND (MATRIX_ROWS/2)
-
-static uint8_t error_count = 0;
-
-#if ((DIODE_DIRECTION == COL2ROW) || (DIODE_DIRECTION == ROW2COL))
-static uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-#elif (DIODE_DIRECTION == CUSTOM_MATRIX)
-static uint8_t row_col_pins[MATRIX_ROWS][MATRIX_COLS] = MATRIX_ROW_COL_PINS;
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-#if (DIODE_DIRECTION == COL2ROW)
-    static void init_cols(void);
-    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
-    static void unselect_rows(void);
-    static void select_row(uint8_t row);
-    static void unselect_row(uint8_t row);
-#elif (DIODE_DIRECTION == ROW2COL)
-    static void init_rows(void);
-    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
-    static void unselect_cols(void);
-    static void unselect_col(uint8_t col);
-    static void select_col(uint8_t col);
-#elif (DIODE_DIRECTION == CUSTOM_MATRIX)
-    static void init_cols_rows(void);
-    static bool read_cols(matrix_row_t current_matrix[], uint8_t current_row);
-#endif
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_slave_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-#ifdef DISABLE_JTAG
-  // JTAG disable for PORT F. write JTD bit twice within four cycles.
-  MCUCR |= (1<<JTD);
-  MCUCR |= (1<<JTD);
-#endif
-
-    debug_enable = true;
-    debug_matrix = true;
-    debug_mouse = true;
-
-    // Set pinout for right half if pinout for that half is defined
-    if (!isLeftHand) {
-#ifdef MATRIX_ROW_PINS_RIGHT
-        const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT;
-        for (uint8_t i = 0; i < MATRIX_ROWS; i++)
-            row_pins[i] = row_pins_right[i];
-#endif
-#ifdef MATRIX_COL_PINS_RIGHT
-        const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT;
-        for (uint8_t i = 0; i < MATRIX_COLS; i++)
-            col_pins[i] = col_pins_right[i];
-#endif
-    }
-
-    // initialize row and col
-#if (DIODE_DIRECTION == COL2ROW)
-    unselect_rows();
-    init_cols();
-#elif (DIODE_DIRECTION == ROW2COL)
-    unselect_cols();
-    init_rows();
-#elif (DIODE_DIRECTION == CUSTOM_MATRIX)
-    init_cols_rows();
-#endif
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-    
-    matrix_init_quantum();
-    
-}
-
-uint8_t _matrix_scan(void)
-{
-    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-#if (DIODE_DIRECTION == COL2ROW)
-    // Set row, read cols
-    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
-#       if (DEBOUNCING_DELAY > 0)
-            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
-
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-
-#       else
-            read_cols_on_row(matrix+offset, current_row);
-#       endif
-
-    }
-
-#elif (DIODE_DIRECTION == ROW2COL)
-    // Set col, read rows
-    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
-#       if (DEBOUNCING_DELAY > 0)
-            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-#       else
-             read_rows_on_col(matrix+offset, current_col);
-#       endif
-
-    }
-
-#elif (DIODE_DIRECTION == CUSTOM_MATRIX)
-    // Set row, read cols
-    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
-#       if (DEBOUNCING_DELAY > 0)
-            bool matrix_changed = read_cols(matrix_debouncing+offset, current_row);
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-#       else
-            read_cols(matrix+offset, current_row);
-#       endif
-    }
-#endif
-
-#   if (DEBOUNCING_DELAY > 0)
-        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
-            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-                matrix[i+offset] = matrix_debouncing[i+offset];
-            }
-            debouncing = false;
-        }
-#   endif
-
-    return 1;
-}
-
-#if defined(USE_I2C) || defined(EH)
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-    int err = 0;
-    
-    // write backlight info
-    #ifdef BACKLIGHT_ENABLE
-        if (BACKLIT_DIRTY) {
-            err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-            if (err) goto i2c_error;
-            
-            // Backlight location
-            err = i2c_master_write(I2C_BACKLIT_START);
-            if (err) goto i2c_error;
-            
-            // Write backlight 
-            i2c_master_write(get_backlight_level());
-            
-            BACKLIT_DIRTY = false;
-        }
-    #endif
-
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-    if (err) goto i2c_error;
-
-    // start of matrix stored at I2C_KEYMAP_START
-    err = i2c_master_write(I2C_KEYMAP_START);
-    if (err) goto i2c_error;
-
-    // Start read
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
-    if (err) goto i2c_error;
-
-    if (!err) {
-        int i;
-        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
-            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
-        }
-        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
-        i2c_master_stop();
-    } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
-        i2c_reset_state();
-        return err;
-    }
-    
-    #ifdef RGBLIGHT_ENABLE
-        if (RGB_DIRTY) {
-            err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-            if (err) goto i2c_error;
-            
-            // RGB Location
-            err = i2c_master_write(I2C_RGB_START);
-            if (err) goto i2c_error;
-            
-            uint32_t dword = eeconfig_read_rgblight();
-            
-            // Write RGB
-            err = i2c_master_write_data(&dword, 4);
-            if (err) goto i2c_error;
-            
-            RGB_DIRTY = false;
-            i2c_master_stop();
-        }
-    #endif
-
-    return 0;
-}
-
-#else // USE_SERIAL
-
-
-typedef struct _Serial_s2m_buffer_t {
-    // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
-    matrix_row_t smatrix[ROWS_PER_HAND];
-} Serial_s2m_buffer_t;
-
-volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
-volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
-uint8_t volatile status0 = 0;
-
-SSTD_t transactions[] = {
-    { (uint8_t *)&status0,
-      sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
-      sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
-  }
-};
-
-void serial_master_init(void)
-{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
-
-void serial_slave_init(void)
-{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
-
-int serial_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
-    if (soft_serial_transaction()) {
-        return 1;
-    }
-
-    // TODO:  if MATRIX_COLS > 8 change to unpack()
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        matrix[slaveOffset+i] = serial_s2m_buffer.smatrix[i];
-    }
-    
-    #ifdef RGBLIGHT_ENABLE
-        // Code to send RGB over serial goes here (not implemented yet)
-    #endif
-    
-    #ifdef BACKLIGHT_ENABLE
-        // Write backlight level for slave to read
-        serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
-    #endif
-
-    return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
-    uint8_t ret = _matrix_scan();
-
-#if defined(USE_I2C) || defined(EH)
-    if( i2c_transaction() ) {
-#else // USE_SERIAL
-    if( serial_transaction() ) {
-#endif
-
-        error_count++;
-
-        if (error_count > ERROR_DISCONNECT_COUNT) {
-            // reset other half if disconnected
-            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-            for (int i = 0; i < ROWS_PER_HAND; ++i) {
-                matrix[slaveOffset+i] = 0;
-            }
-        }
-    } else {
-        error_count = 0;
-    }
-    matrix_scan_quantum();
-    return ret;
-}
-
-void matrix_slave_scan(void) {
-    _matrix_scan();
-
-    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#if defined(USE_I2C) || defined(EH)
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        i2c_slave_buffer[I2C_KEYMAP_START+i] = matrix[offset+i];
-    }   
-#else // USE_SERIAL
-    // TODO: if MATRIX_COLS > 8 change to pack()
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        serial_s2m_buffer.smatrix[i] = matrix[offset+i];
-    }
-#endif
-    matrix_slave_scan_user();
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
-    }
-    return count;
-}
-
-#if (DIODE_DIRECTION == COL2ROW)
-
-static void init_cols(void)
-{
-    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
-        uint8_t pin = col_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
-{
-    // Store last value of row prior to reading
-    matrix_row_t last_row_value = current_matrix[current_row];
-
-    // Clear data in matrix row
-    current_matrix[current_row] = 0;
-
-    // Select row and wait for row selecton to stabilize
-    select_row(current_row);
-    wait_us(30);
-
-    // For each col...
-    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
-
-        // Select the col pin to read (active low)
-        uint8_t pin = col_pins[col_index];
-        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
-
-        // Populate the matrix row with the state of the col pin
-        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
-    }
-
-    // Unselect row
-    unselect_row(current_row);
-
-    return (last_row_value != current_matrix[current_row]);
-}
-
-static void select_row(uint8_t row)
-{
-    uint8_t pin = row_pins[row];
-    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
-    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
-}
-
-static void unselect_row(uint8_t row)
-{
-    uint8_t pin = row_pins[row];
-    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-}
-
-static void unselect_rows(void)
-{
-    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-        uint8_t pin = row_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-#elif (DIODE_DIRECTION == ROW2COL)
-
-static void init_rows(void)
-{
-    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-        uint8_t pin = row_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
-{
-    bool matrix_changed = false;
-
-    // Select col and wait for col selecton to stabilize
-    select_col(current_col);
-    wait_us(30);
-
-    // For each row...
-    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
-    {
-
-        // Store last value of row prior to reading
-        matrix_row_t last_row_value = current_matrix[row_index];
-
-        // Check row pin state
-        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
-        {
-            // Pin LO, set col bit
-            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
-        }
-        else
-        {
-            // Pin HI, clear col bit
-            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
-        }
-
-        // Determine if the matrix changed state
-        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
-        {
-            matrix_changed = true;
-        }
-    }
-
-    // Unselect col
-    unselect_col(current_col);
-
-    return matrix_changed;
-}
-
-static void select_col(uint8_t col)
-{
-    uint8_t pin = col_pins[col];
-    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
-    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
-}
-
-static void unselect_col(uint8_t col)
-{
-    uint8_t pin = col_pins[col];
-    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-}
-
-static void unselect_cols(void)
-{
-    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
-        uint8_t pin = col_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-#elif (DIODE_DIRECTION == CUSTOM_MATRIX)
-
-static void init_cols_rows(void)
-{
-    for(int row = 0; row < MATRIX_ROWS; row++) {
-        for(int col = 0; col < MATRIX_COLS; col++) {
-            uint8_t pin = row_col_pins[row][col];
-            if(pin == NO_PIN) {
-                continue;
-            }
-            // DDxn set 0 for input
-            _SFR_IO8((pin >> 4) + 1) &=  ~_BV(pin & 0xF);
-            // PORTxn set 1 for input/pullup
-            _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF);
-        }
-    }
-}
-
-static bool read_cols(matrix_row_t current_matrix[], uint8_t current_row)
-{
-    matrix_row_t last_row_value = current_matrix[current_row];
-    current_matrix[current_row] = 0;
-
-    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
-        uint8_t pin = row_col_pins[current_row][col_index];
-        if(pin == NO_PIN) {
-            current_matrix[current_row] |= 0;
-        }
-        else {
-            uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
-            current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
-        }
-    }
-
-    return (last_row_value != current_matrix[current_row]);
-}
-
-#endif

keyboards/miniaxe/rules.mk

@@ -1,4 +1,3 @@
-SRC += matrix.c
 
 # MCU name
 #MCU = at90usb1286
@@ -83,6 +82,6 @@ FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
 DEBUG_ENABLE = no
-CUSTOM_MATRIX = yes         # Use custom matrix code 
+CUSTOM_MATRIX = no         # Use custom matrix code
 SPLIT_KEYBOARD = yes        # Use shared split_common code
 

keyboards/planck/rev1/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+#define DEVICE_VER 0x0001

keyboards/planck/rev1/rules.mk

@@ -0,0 +1 @@
+AUDIO_ENABLE = no           # Audio output on port C6

keyboards/planck/rev2/config.h

@@ -0,0 +1,3 @@
+#pragma once
+
+#define DEVICE_VER 0x0002

keyboards/planck/rev2/rules.mk

@@ -0,0 +1 @@
+AUDIO_ENABLE = no           # Audio output on port C6

keyboards/planck/rev3/config.h

@@ -1,8 +1,3 @@
-#ifndef REV3_CONFIG_H
+#pragma once
-#define REV3_CONFIG_H
-
-#include "config_common.h"
 
 #define DEVICE_VER 0x0003
-
-#endif

keyboards/planck/rev4/config.h

@@ -1,8 +1,3 @@
-#ifndef REV4_CONFIG_H
+#pragma once
-#define REV4_CONFIG_H
-
-#include "config_common.h"
 
 #define DEVICE_VER 0x0004
-
-#endif

keyboards/planck/rev5/config.h

@@ -1,8 +1,3 @@
-#ifndef REV5_CONFIG_H
+#pragma once
-#define REV5_CONFIG_H
-
-#include "config_common.h"
 
 #define DEVICE_VER 0x0005
-
-#endif

keyboards/whitefox/keymaps/konstantin/config.h

@@ -1,27 +1,7 @@
 #pragma once
 
-#define FORCE_NKRO
+#define LAYER_FN
+#define LAYER_NUMPAD
 
 #undef  IS_COMMAND
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RCTL)))
-
-#define MAGIC_KEY_LAYER0_ALT1 BSLS
-#define MAGIC_KEY_BOOTLOADER  ESC
-
-#define MOUSEKEY_DELAY             50
-#define MOUSEKEY_INTERVAL          15
-#define MOUSEKEY_MAX_SPEED         4
-#define MOUSEKEY_TIME_TO_MAX       50
-#define MOUSEKEY_WHEEL_MAX_SPEED   1
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 50
-
-#define NO_ACTION_FUNCTION
-#define NO_ACTION_MACRO
-
-#define PERMISSIVE_HOLD
-#define TAPPING_TERM    200
-#define TAPPING_TOGGLE  2
-
-#define UNICODE_CYCLE_PERSIST   false
-#define UNICODE_SELECTED_MODES  UC_WINC, UC_LNX
-#define UNICODE_WINC_KEY        KC_RGUI

keyboards/whitefox/keymaps/konstantin/keymap.c

@@ -1,136 +1,5 @@
 #include QMK_KEYBOARD_H
-
+#include "konstantin.h"
-#define TOP     LCTL(KC_HOME)
-#define BOTTOM  LCTL(KC_END)
-#define DSKTP_L LCTL(LGUI(KC_LEFT))
-#define DSKTP_R LCTL(LGUI(KC_RGHT))
-
-#define FN      MO(L_FN)
-#define FN_CAPS LT(L_FN, KC_CAPS)
-#define FN_FNLK TT(L_FN)
-
-#define DESKTOP TD(TD_DESKTOP)
-#define FN_RCTL TD(TD_FN_RCTL)
-#define RAL_LAL TD(TD_RAL_LAL)
-#define RAL_RGU TD(TD_RAL_RGU)
-#define RCT_RSF TD(TD_RCT_RSF)
-
-#define COMMA   UC(0x002C)
-#define L_PAREN UC(0x0028)
-#define R_PAREN UC(0x0029)
-#define EQUALS  UC(0x003D)
-#define TIMES   UC(0x00D7)
-#define DIVIDE  UC(0x00F7)
-#define MINUS   UC(0x2212)
-
-enum layers {
-  L_BASE,
-  L_FN,
-  L_NUMPAD,
-};
-
-enum custom_keycodes {
-  CLEAR = SAFE_RANGE,
-  NUMPAD,
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-  case CLEAR:
-    if (record->event.pressed) {
-      SEND_STRING(SS_LCTRL("a") SS_TAP(X_DELETE));
-    }
-    return false;
-
-  case NUMPAD:
-    if (record->event.pressed) {
-      layer_invert(L_NUMPAD);
-      bool num_lock = host_keyboard_leds() & 1<<USB_LED_NUM_LOCK;
-      if (num_lock != (bool)IS_LAYER_ON(L_NUMPAD)) {
-        tap_code(KC_NLCK); // Toggle Num Lock to match layer state.
-      }
-    }
-    return false;
-
-  default:
-    return true;
-  }
-}
-
-struct {
-  bool fn_on; // Layer state when tap dance started
-  bool started;
-} td_fn_rctrl_data;
-
-void td_fn_rctrl_each(qk_tap_dance_state_t *state, void *user_data) {
-  if (!td_fn_rctrl_data.started) {
-    td_fn_rctrl_data.fn_on = IS_LAYER_ON(L_FN);
-    td_fn_rctrl_data.started = true;
-  }
-  // Single tap → Fn, double tap → RCtrl, triple tap etc. → Fn+RCtrl
-  if (state->count == 1 || state->count == 3) {
-    layer_on(L_FN);
-  } else if (state->count == 2) {
-    if (!td_fn_rctrl_data.fn_on) {
-      layer_off(L_FN);
-    }
-    register_code(KC_RCTL);
-  }
-}
-
-void td_fn_rctrl_reset(qk_tap_dance_state_t *state, void *user_data) {
-  if ((state->count == 1 || state->count > 2) && !td_fn_rctrl_data.fn_on) {
-    layer_off(L_FN);
-  }
-  if (state->count >= 2) {
-    unregister_code(KC_RCTL);
-  }
-  td_fn_rctrl_data.started = false;
-}
-
-#define ACTION_TAP_DANCE_DOUBLE_MODS(mod1, mod2) { \
-    .fn = { td_double_mods_each, NULL, td_double_mods_reset }, \
-    .user_data = &(qk_tap_dance_pair_t){ mod1, mod2 }, \
-  }
-
-void td_double_mods_each(qk_tap_dance_state_t *state, void *user_data) {
-  qk_tap_dance_pair_t *mods = (qk_tap_dance_pair_t *)user_data;
-  // Single tap → mod1, double tap → mod2, triple tap etc. → mod1+mod2
-  if (state->count == 1 || state->count == 3) {
-    register_code(mods->kc1);
-  } else if (state->count == 2) {
-    unregister_code(mods->kc1);
-    register_code(mods->kc2);
-  }
-  // Prevent tap dance from sending kc1 and kc2 as weak mods
-  state->weak_mods &= ~(MOD_BIT(mods->kc1) | MOD_BIT(mods->kc2));
-}
-
-void td_double_mods_reset(qk_tap_dance_state_t *state, void *user_data) {
-  qk_tap_dance_pair_t *mods = (qk_tap_dance_pair_t *)user_data;
-  if (state->count == 1 || state->count > 2) {
-    unregister_code(mods->kc1);
-  }
-  if (state->count >= 2) {
-    unregister_code(mods->kc2);
-  }
-}
-
-enum tap_dance {
-  TD_DESKTOP,
-  TD_FN_RCTL,
-  TD_RAL_LAL,
-  TD_RAL_RGU,
-  TD_RCT_RSF,
-};
-
-qk_tap_dance_action_t tap_dance_actions[] = {
-  [TD_DESKTOP] = ACTION_TAP_DANCE_DOUBLE(LCTL(LGUI(KC_D)), LCTL(LGUI(KC_F4))), // Add/close virtual desktop
-  [TD_FN_RCTL] = ACTION_TAP_DANCE_FN_ADVANCED(td_fn_rctrl_each, NULL, td_fn_rctrl_reset),
-  [TD_RAL_LAL] = ACTION_TAP_DANCE_DOUBLE_MODS(KC_RALT, KC_LALT),
-  [TD_RAL_RGU] = ACTION_TAP_DANCE_DOUBLE_MODS(KC_RALT, KC_RGUI),
-  [TD_RCT_RSF] = ACTION_TAP_DANCE_DOUBLE_MODS(KC_RCTL, KC_RSFT),
-};
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Base layer
@@ -141,9 +10,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
    * │FnCaps│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter  │PgU│
    * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
-   * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │CtlSft│ ↑ │PgD│
+   * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RCtRSf│ ↑ │PgD│
    * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤
-   * │LCtl│LGui│LAlt│         Space          │AlGu│FnLk│ │ ← │ ↓ │ → │
+   * │LCtl│LGui│LAlt│         Space          │RAlG│FnLk│ │ ← │ ↓ │ → │
    * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
    */
   [L_BASE] = LAYOUT_truefox( \
@@ -177,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   /* Numpad layer
    * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
-   * │Num│   │   │   │   │   │   │P7 │P8 │P9 │P- │ − │ = │Num│   │   │
+   * │   │   │   │   │   │   │   │P7 │P8 │P9 │P- │ − │ = │Num│   │   │
    * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
    * │     │   │   │   │   │   │   │P4 │P5 │P6 │P+ │ ( │ ) │     │   │
    * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
@@ -189,7 +58,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘
    */
   [L_NUMPAD] = LAYOUT_truefox( \
-    NUMPAD,  _______, _______, _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   KC_PMNS, MINUS,   EQUALS,  NUMPAD,  _______, _______, \
+    _______, _______, _______, _______, _______, _______, _______, KC_P7,   KC_P8,   KC_P9,   KC_PMNS, MINUS,   EQUALS,  NUMPAD,  _______, _______, \
     _______, _______, _______, _______, _______, _______, _______, KC_P4,   KC_P5,   KC_P6,   KC_PPLS, L_PAREN, R_PAREN, _______,          _______, \
     _______, _______, _______, _______, _______, _______, _______, KC_P1,   KC_P2,   KC_P3,   KC_PAST, TIMES,            KC_PENT,          _______, \
     _______,          _______, _______, _______, _______, _______, KC_P0,   KC_P0,   COMMA,   KC_PDOT, KC_PSLS, DIVIDE,           _______, _______, \

keyboards/whitefox/keymaps/konstantin/rules.mk

@@ -1,13 +1,2 @@
 BACKLIGHT_ENABLE  = no
-BOOTMAGIC_ENABLE  = no
-COMMAND_ENABLE    = yes
-CONSOLE_ENABLE    = yes
-EXTRAKEY_ENABLE   = yes
-MOUSEKEY_ENABLE   = yes
-NKRO_ENABLE       = yes
-SLEEP_LED_ENABLE  = no
-TAP_DANCE_ENABLE  = yes
-UNICODE_ENABLE    = yes
 VISUALIZER_ENABLE = no
-
-EXTRAFLAGS += -flto

quantum/config_common.h

@@ -21,6 +21,9 @@
 #define ROW2COL       1
 #define CUSTOM_MATRIX 2 /* Disables built-in matrix scanning code */
 
+// useful for direct pin mapping
+#define NO_PIN (~0)
+
 #ifdef __AVR__
     #ifndef __ASSEMBLER__
       #include <avr/io.h>

quantum/debounce.c

@@ -0,0 +1,52 @@
+
+#include "matrix.h"
+#include "timer.h"
+#include "quantum.h"
+
+#ifndef DEBOUNCING_DELAY
+#  define DEBOUNCING_DELAY 5
+#endif
+
+void debounce_init(uint8_t num_rows) {
+}
+
+#if DEBOUNCING_DELAY > 0
+
+static bool debouncing = false;
+
+void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) {
+  static uint16_t debouncing_time;
+
+  if (changed) {
+    debouncing = true;
+    debouncing_time = timer_read();
+  }
+
+  if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+    for (uint8_t i = 0; i < num_rows; i++) {
+      cooked[i] = raw[i];
+    }
+    debouncing = false;
+  }
+}
+
+bool debounce_active(void) {
+  return debouncing;
+}
+
+#else
+
+// no debounce
+void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) {
+  if (changed)
+  {
+  for (uint8_t i = 0; i < num_rows; i++) {
+      cooked[i] = raw[i];
+    }
+  }
+}
+
+bool debounce_active(void) {
+  return false;
+}
+#endif

quantum/debounce.h

@@ -0,0 +1,11 @@
+#pragma once
+
+// raw is the current key state
+// on entry cooked is the previous debounced state
+// on exit cooked is the current debounced state
+// changed is true if raw has changed since the last call
+void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed);
+
+bool debounce_active(void);
+
+void debounce_init(uint8_t num_rows);

quantum/matrix.c

@@ -21,21 +21,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "debug.h"
 #include "util.h"
 #include "matrix.h"
-#include "timer.h"
+#include "debounce.h"
 #include "quantum.h"
 
-
-/* Set 0 if debouncing isn't needed */
-
-#ifndef DEBOUNCING_DELAY
-#   define DEBOUNCING_DELAY 5
-#endif
-
-#if (DEBOUNCING_DELAY > 0)
-    static uint16_t debouncing_time;
-    static bool debouncing = false;
-#endif
-
 #if (MATRIX_COLS <= 8)
 #    define print_matrix_header()  print("\nr/c 01234567\n")
 #    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
@@ -63,9 +51,9 @@ static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
 #endif
 
 /* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t raw_matrix[MATRIX_ROWS];
 
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+static matrix_row_t matrix[MATRIX_ROWS];
 
 
 #if (DIODE_DIRECTION == COL2ROW)
@@ -157,70 +145,39 @@ void matrix_init(void) {
 
     // initialize matrix state: all keys off
     for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        raw_matrix[i] = 0;
         matrix[i] = 0;
-        matrix_debouncing[i] = 0;
     }
+    debounce_init(MATRIX_ROWS);
 
     matrix_init_quantum();
 }
 
 uint8_t matrix_scan(void)
 {
+  bool changed = false;
 
 #if (DIODE_DIRECTION == COL2ROW)
-
+  // Set row, read cols
-    // Set row, read cols
+  for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
-    for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+    changed |= read_cols_on_row(raw_matrix, current_row);
-#       if (DEBOUNCING_DELAY > 0)
+  }
-            bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
-
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-
-#       else
-            read_cols_on_row(matrix, current_row);
-#       endif
-
-    }
-
 #elif (DIODE_DIRECTION == ROW2COL)
-
+  // Set col, read rows
-    // Set col, read rows
+  for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
-    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+    changed |= read_rows_on_col(raw_matrix, current_col);
-#       if (DEBOUNCING_DELAY > 0)
+  }
-            bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-#       else
-             read_rows_on_col(matrix, current_col);
-#       endif
-
-    }
-
 #endif
 
-#   if (DEBOUNCING_DELAY > 0)
+  debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
-        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-            debouncing = false;
-        }
-#   endif
 
-    matrix_scan_quantum();
+  matrix_scan_quantum();
-    return 1;
+  return 1;
 }
 
 bool matrix_is_modified(void)
 {
-#if (DEBOUNCING_DELAY > 0)
+    if (debounce_active()) return false;
-    if (debouncing) return false;
-#endif
     return true;
 }
 

quantum/process_keycode/process_terminal.c

@@ -273,11 +273,17 @@ bool process_terminal(uint16_t keycode, keyrecord_t *record) {
             disable_terminal();
             return false;
         }
+
+        if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) {
+            keycode = keycode & 0xFF;
+        }
+
         if (keycode < 256) {
             uint8_t str_len;
             char char_to_add;
             switch (keycode) {
                 case KC_ENTER:
+                case KC_KP_ENTER:
                     push_to_cmd_buffer();
                     current_cmd_buffer_pos = 0;
                     process_terminal_command();

quantum/split_common/i2c.h

@@ -1,5 +1,4 @@
-#ifndef I2C_H
+#pragma once
-#define I2C_H
 
 #include <stdint.h>
 
@@ -58,5 +57,3 @@ extern unsigned char i2c_readNak(void);
 extern unsigned char i2c_read(unsigned char ack);
 
 #define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
-
-#endif

quantum/split_common/matrix.c

@@ -25,529 +25,304 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "matrix.h"
 #include "split_util.h"
 #include "config.h"
-#include "timer.h"
 #include "split_flags.h"
 #include "quantum.h"
-
+#include "debounce.h"
-#ifdef BACKLIGHT_ENABLE
+#include "transport.h"
-#   include "backlight.h"
-    extern backlight_config_t backlight_config;
-#endif
-
-#if defined(USE_I2C) || defined(EH)
-#  include "i2c.h"
-#else // USE_SERIAL
-#  include "serial.h"
-#endif
-
-#ifndef DEBOUNCING_DELAY
-#   define DEBOUNCING_DELAY 5
-#endif
-
-#if (DEBOUNCING_DELAY > 0)
-    static uint16_t debouncing_time;
-    static bool debouncing = false;
-#endif
-
-#if defined(USE_I2C) || defined(EH)
 
 #if (MATRIX_COLS <= 8)
-#    define print_matrix_header()  print("\nr/c 01234567\n")
+#  define print_matrix_header() print("\nr/c 01234567\n")
-#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#  define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop(matrix[i])
+#  define matrix_bitpop(i) bitpop(matrix[i])
-#    define ROW_SHIFTER ((uint8_t)1)
+#  define ROW_SHIFTER ((uint8_t)1)
-#else
-#    error "Currently only supports 8 COLS"
-#endif
-
-#else // USE_SERIAL
-
-#if (MATRIX_COLS <= 8)
-#    define print_matrix_header()  print("\nr/c 01234567\n")
-#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop(matrix[i])
-#    define ROW_SHIFTER ((uint8_t)1)
 #elif (MATRIX_COLS <= 16)
-#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#  define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#  define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#  define matrix_bitpop(i) bitpop16(matrix[i])
-#    define ROW_SHIFTER ((uint16_t)1)
+#  define ROW_SHIFTER ((uint16_t)1)
 #elif (MATRIX_COLS <= 32)
-#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#  define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#  define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#  define matrix_bitpop(i) bitpop32(matrix[i])
-#    define ROW_SHIFTER  ((uint32_t)1)
+#  define ROW_SHIFTER ((uint32_t)1)
 #endif
 
-#endif
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
 #define ERROR_DISCONNECT_COUNT 5
 
-#define ROWS_PER_HAND (MATRIX_ROWS/2)
+#define ROWS_PER_HAND (MATRIX_ROWS / 2)
-
-static uint8_t error_count = 0;
 
+#ifdef DIRECT_PINS
+static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS;
+#else
 static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
 static pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+#endif
 
 /* matrix state(1:on, 0:off) */
 static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+static matrix_row_t raw_matrix[ROWS_PER_HAND];
+
+// row offsets for each hand
+uint8_t thisHand, thatHand;
+
+// user-defined overridable functions
+
+__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__((weak)) void matrix_init_user(void) {}
+
+__attribute__((weak)) void matrix_scan_user(void) {}
+
+__attribute__((weak)) void matrix_slave_scan_user(void) {}
+
+// helper functions
+
+inline uint8_t matrix_rows(void) { return MATRIX_ROWS; }
+
+inline uint8_t matrix_cols(void) { return MATRIX_COLS; }
+
+bool matrix_is_modified(void) {
+  if (debounce_active()) return false;
+  return true;
+}
+
+inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
+
+inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
+
+void matrix_print(void) {
+  print_matrix_header();
+
+  for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+    phex(row);
+    print(": ");
+    print_matrix_row(row);
+    print("\n");
+  }
+}
+
+uint8_t matrix_key_count(void) {
+  uint8_t count = 0;
+  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+    count += matrix_bitpop(i);
+  }
+  return count;
+}
+
+// matrix code
+
+#ifdef DIRECT_PINS
+
+static void init_pins(void) {
+  for (int row = 0; row < MATRIX_ROWS; row++) {
+    for (int col = 0; col < MATRIX_COLS; col++) {
+      pin_t pin = direct_pins[row][col];
+      if (pin != NO_PIN) {
+        setPinInputHigh(pin);
+      }
+    }
+  }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
+  matrix_row_t last_row_value = current_matrix[current_row];
+  current_matrix[current_row] = 0;
+
+  for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+    pin_t pin = direct_pins[current_row][col_index];
+    if (pin != NO_PIN) {
+      current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index);
+    }
+  }
+
+  return (last_row_value != current_matrix[current_row]);
+}
+
+#elif (DIODE_DIRECTION == COL2ROW)
+
+static void select_row(uint8_t row) {
+  writePinLow(row_pins[row]);
+  setPinOutput(row_pins[row]);
+}
+
+static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); }
+
+static void unselect_rows(void) {
+  for (uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+    setPinInputHigh(row_pins[x]);
+  }
+}
+
+static void init_pins(void) {
+  unselect_rows();
+  for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+    setPinInputHigh(col_pins[x]);
+  }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
+  // Store last value of row prior to reading
+  matrix_row_t last_row_value = current_matrix[current_row];
+
+  // Clear data in matrix row
+  current_matrix[current_row] = 0;
+
+  // Select row and wait for row selecton to stabilize
+  select_row(current_row);
+  wait_us(30);
+
+  // For each col...
+  for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+    // Populate the matrix row with the state of the col pin
+    current_matrix[current_row] |= readPin(col_pins[col_index]) ? 0 : (ROW_SHIFTER << col_index);
+  }
+
+  // Unselect row
+  unselect_row(current_row);
+
+  return (last_row_value != current_matrix[current_row]);
+}
 
-#if (DIODE_DIRECTION == COL2ROW)
-    static void init_cols(void);
-    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
-    static void unselect_rows(void);
-    static void select_row(uint8_t row);
-    static void unselect_row(uint8_t row);
 #elif (DIODE_DIRECTION == ROW2COL)
-    static void init_rows(void);
+
-    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+static void select_col(uint8_t col) {
-    static void unselect_cols(void);
+  writePinLow(col_pins[col]);
-    static void unselect_col(uint8_t col);
+  setPinOutput(col_pins[col]);
-    static void select_col(uint8_t col);
+}
+
+static void unselect_col(uint8_t col) { setPinInputHigh(col_pins[col]); }
+
+static void unselect_cols(void) {
+  for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+    setPinInputHigh(col_pins[x]);
+  }
+}
+
+static void init_pins(void) {
+  unselect_cols();
+  for (uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+    setPinInputHigh(row_pins[x]);
+  }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
+  bool matrix_changed = false;
+
+  // Select col and wait for col selecton to stabilize
+  select_col(current_col);
+  wait_us(30);
+
+  // For each row...
+  for (uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) {
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[row_index];
+
+    // Check row pin state
+    if (readPin(row_pins[row_index])) {
+      // Pin HI, clear col bit
+      current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+    } else {
+      // Pin LO, set col bit
+      current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+    }
+
+    // Determine if the matrix changed state
+    if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) {
+      matrix_changed = true;
+    }
+  }
+
+  // Unselect col
+  unselect_col(current_col);
+
+  return matrix_changed;
+}
+
 #endif
 
-__attribute__ ((weak))
+void matrix_init(void) {
-void matrix_init_kb(void) {
+  debug_enable = true;
-    matrix_init_user();
+  debug_matrix = true;
-}
+  debug_mouse  = true;
 
-__attribute__ ((weak))
+  // Set pinout for right half if pinout for that half is defined
-void matrix_scan_kb(void) {
+  if (!isLeftHand) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_slave_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    debug_enable = true;
-    debug_matrix = true;
-    debug_mouse = true;
-
-    // Set pinout for right half if pinout for that half is defined
-    if (!isLeftHand) {
 #ifdef MATRIX_ROW_PINS_RIGHT
-        const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT;
+    const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT;
-        for (uint8_t i = 0; i < MATRIX_ROWS; i++)
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-            row_pins[i] = row_pins_right[i];
+      row_pins[i] = row_pins_right[i];
+    }
 #endif
 #ifdef MATRIX_COL_PINS_RIGHT
-        const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT;
+    const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT;
-        for (uint8_t i = 0; i < MATRIX_COLS; i++)
+    for (uint8_t i = 0; i < MATRIX_COLS; i++) {
-            col_pins[i] = col_pins_right[i];
+      col_pins[i] = col_pins_right[i];
-#endif
-    }
-
-    // initialize row and col
-#if (DIODE_DIRECTION == COL2ROW)
-    unselect_rows();
-    init_cols();
-#elif (DIODE_DIRECTION == ROW2COL)
-    unselect_cols();
-    init_rows();
-#endif
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-    
-    matrix_init_quantum();
-    
-}
-
-uint8_t _matrix_scan(void)
-{
-    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-#if (DIODE_DIRECTION == COL2ROW)
-    // Set row, read cols
-    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
-#       if (DEBOUNCING_DELAY > 0)
-            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
-
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-
-#       else
-            read_cols_on_row(matrix+offset, current_row);
-#       endif
-
-    }
-
-#elif (DIODE_DIRECTION == ROW2COL)
-    // Set col, read rows
-    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
-#       if (DEBOUNCING_DELAY > 0)
-            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-#       else
-             read_rows_on_col(matrix+offset, current_col);
-#       endif
-
     }
 #endif
-
-#   if (DEBOUNCING_DELAY > 0)
-        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
-            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-                matrix[i+offset] = matrix_debouncing[i+offset];
-            }
-            debouncing = false;
-        }
-#   endif
-
-    return 1;
-}
-
-#if defined(USE_I2C) || defined(EH)
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-    int err = 0;
-    
-    // write backlight info
-    #ifdef BACKLIGHT_ENABLE
-        if (BACKLIT_DIRTY) {
-            err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-            if (err) goto i2c_error;
-            
-            // Backlight location
-            err = i2c_master_write(I2C_BACKLIT_START);
-            if (err) goto i2c_error;
-            
-            // Write backlight 
-            i2c_master_write(get_backlight_level());
-            
-            BACKLIT_DIRTY = false;
-        }
-    #endif
-
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-    if (err) goto i2c_error;
-
-    // start of matrix stored at I2C_KEYMAP_START
-    err = i2c_master_write(I2C_KEYMAP_START);
-    if (err) goto i2c_error;
-
-    // Start read
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
-    if (err) goto i2c_error;
-
-    if (!err) {
-        int i;
-        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
-            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
-        }
-        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
-        i2c_master_stop();
-    } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
-        i2c_reset_state();
-        return err;
-    }
-    
-    #ifdef RGBLIGHT_ENABLE
-        if (RGB_DIRTY) {
-            err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-            if (err) goto i2c_error;
-            
-            // RGB Location
-            err = i2c_master_write(I2C_RGB_START);
-            if (err) goto i2c_error;
-            
-            uint32_t dword = eeconfig_read_rgblight();
-            
-            // Write RGB
-            err = i2c_master_write_data(&dword, 4);
-            if (err) goto i2c_error;
-            
-            RGB_DIRTY = false;
-            i2c_master_stop();
-        }
-    #endif
-
-    return 0;
-}
-
-#else // USE_SERIAL
-
-
-typedef struct _Serial_s2m_buffer_t {
-    // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
-    matrix_row_t smatrix[ROWS_PER_HAND];
-} Serial_s2m_buffer_t;
-
-volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
-volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
-uint8_t volatile status0 = 0;
-
-SSTD_t transactions[] = {
-    { (uint8_t *)&status0,
-      sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
-      sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
   }
-};
 
-void serial_master_init(void)
+  thisHand = isLeftHand ? 0 : (ROWS_PER_HAND);
-{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
+  thatHand = ROWS_PER_HAND - thisHand;
 
-void serial_slave_init(void)
+  // initialize key pins
-{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
+  init_pins();
 
-int serial_transaction(void) {
+  // initialize matrix state: all keys off
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+    matrix[i] = 0;
+  }
 
-    if (soft_serial_transaction()) {
+  debounce_init(ROWS_PER_HAND);
-        return 1;
-    }
 
-    // TODO:  if MATRIX_COLS > 8 change to unpack()
+  matrix_init_quantum();
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        matrix[slaveOffset+i] = serial_s2m_buffer.smatrix[i];
-    }
-    
-    #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
-        // Code to send RGB over serial goes here (not implemented yet)
-    #endif
-    
-    #ifdef BACKLIGHT_ENABLE
-        // Write backlight level for slave to read
-        serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
-    #endif
-
-    return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
-    uint8_t ret = _matrix_scan();
-
-#if defined(USE_I2C) || defined(EH)
-    if( i2c_transaction() ) {
-#else // USE_SERIAL
-    if( serial_transaction() ) {
-#endif
-
-        error_count++;
-
-        if (error_count > ERROR_DISCONNECT_COUNT) {
-            // reset other half if disconnected
-            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-            for (int i = 0; i < ROWS_PER_HAND; ++i) {
-                matrix[slaveOffset+i] = 0;
-            }
-        }
-    } else {
-        error_count = 0;
-    }
-    matrix_scan_quantum();
-    return ret;
 }
 
-void matrix_slave_scan(void) {
+uint8_t _matrix_scan(void) {
-    _matrix_scan();
+  bool changed = false;
-
-    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#if defined(USE_I2C) || defined(EH)
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        i2c_slave_buffer[I2C_KEYMAP_START+i] = matrix[offset+i];
-    }   
-#else // USE_SERIAL
-    // TODO: if MATRIX_COLS > 8 change to pack()
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        serial_s2m_buffer.smatrix[i] = matrix[offset+i];
-    }
-#endif
-    matrix_slave_scan_user();
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
-    }
-    return count;
-}
-
-#if (DIODE_DIRECTION == COL2ROW)
-
-static void init_cols(void)
-{
-    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
-        setPinInputHigh(col_pins[x]);
-    }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
-{
-    // Store last value of row prior to reading
-    matrix_row_t last_row_value = current_matrix[current_row];
-
-    // Clear data in matrix row
-    current_matrix[current_row] = 0;
-
-    // Select row and wait for row selecton to stabilize
-    select_row(current_row);
-    wait_us(30);
-
-    // For each col...
-    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
-        // Populate the matrix row with the state of the col pin
-        current_matrix[current_row] |=  readPin(col_pins[col_index]) ? 0 : (ROW_SHIFTER << col_index);
-    }
-
-    // Unselect row
-    unselect_row(current_row);
-
-    return (last_row_value != current_matrix[current_row]);
-}
-
-static void select_row(uint8_t row)
-{
-    writePinLow(row_pins[row]);
-    setPinOutput(row_pins[row]);
-}
-
-static void unselect_row(uint8_t row)
-{
-    setPinInputHigh(row_pins[row]);
-}
-
-static void unselect_rows(void)
-{
-    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-        setPinInputHigh(row_pins[x]);
-    }
-}
 
+#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW)
+  // Set row, read cols
+  for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
+    changed |= read_cols_on_row(raw_matrix, current_row);
+  }
 #elif (DIODE_DIRECTION == ROW2COL)
-
+  // Set col, read rows
-static void init_rows(void)
+  for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
-{
+    changed |= read_rows_on_col(raw_matrix, current_col);
-    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+  }
-        setPinInputHigh(row_pins[x]);
-    }
-}
-
-static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
-{
-    bool matrix_changed = false;
-
-    // Select col and wait for col selecton to stabilize
-    select_col(current_col);
-    wait_us(30);
-
-    // For each row...
-    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
-    {
-
-        // Store last value of row prior to reading
-        matrix_row_t last_row_value = current_matrix[row_index];
-
-        // Check row pin state
-        if (readPin(row_pins[row_index]))
-        {
-            // Pin HI, clear col bit
-            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
-        }
-        else
-        {
-            // Pin LO, set col bit
-            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
-        }
-
-        // Determine if the matrix changed state
-        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
-        {
-            matrix_changed = true;
-        }
-    }
-
-    // Unselect col
-    unselect_col(current_col);
-
-    return matrix_changed;
-}
-
-static void select_col(uint8_t col)
-{
-    writePinLow(col_pins[col]);
-    setPinOutput(col_pins[col]);
-}
-
-static void unselect_col(uint8_t col)
-{
-    setPinInputHigh(col_pins[col]);
-}
-
-static void unselect_cols(void)
-{
-    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
-        setPinInputHigh(col_pins[x]);
-    }
-}
-
 #endif
+
+  debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed);
+
+  return 1;
+}
+
+uint8_t matrix_scan(void) {
+  uint8_t ret = _matrix_scan();
+
+  if (is_keyboard_master()) {
+    static uint8_t error_count;
+
+    if (!transport_master(matrix + thatHand)) {
+      error_count++;
+
+      if (error_count > ERROR_DISCONNECT_COUNT) {
+        // reset other half if disconnected
+        for (int i = 0; i < ROWS_PER_HAND; ++i) {
+          matrix[thatHand + i] = 0;
+        }
+      }
+    } else {
+      error_count = 0;
+    }
+
+    matrix_scan_quantum();
+  } else {
+    transport_slave(matrix + thisHand);
+    matrix_slave_scan_user();
+  }
+
+  return ret;
+}

quantum/split_common/matrix.h

@@ -1,31 +1,3 @@
-#ifndef SPLIT_COMMON_MATRIX_H
+#pragma once
-#define SPLIT_COMMON_MATRIX_H
 
 #include <common/matrix.h>
-
-#ifdef RGBLIGHT_ENABLE
-#   include "rgblight.h"
-#endif
-
-typedef struct _Serial_m2s_buffer_t {
-#ifdef BACKLIGHT_ENABLE
-    uint8_t backlight_level;
-#endif
-#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
-    rgblight_config_t rgblight_config; //not yet use
-    //
-    // When MCUs on both sides drive their respective RGB LED chains,
-    // it is necessary to synchronize, so it is necessary to communicate RGB information.
-    // In that case, define the RGBLIGHT_SPLIT macro.
-    //
-    // Otherwise, if the master side MCU drives both sides RGB LED chains,
-    // there is no need to communicate.
-#endif
-} Serial_m2s_buffer_t;
-
-extern volatile Serial_m2s_buffer_t serial_m2s_buffer;
-
-void serial_master_init(void);
-void serial_slave_init(void);
-
-#endif

quantum/split_common/serial.h

@@ -1,5 +1,4 @@
-#ifndef SOFT_SERIAL_H
+#pragma once
-#define SOFT_SERIAL_H
 
 #include <stdbool.h>
 
@@ -61,5 +60,3 @@ int  soft_serial_transaction(int sstd_index);
 #ifdef SERIAL_USE_MULTI_TRANSACTION
 int  soft_serial_get_and_clean_status(int sstd_index);
 #endif
-
-#endif /* SOFT_SERIAL_H */

quantum/split_common/split_flags.h

@@ -1,5 +1,4 @@
-#ifndef SPLIT_FLAGS_H
+#pragma once
-#define SPLIT_FLAGS_H
 
 #include <stdbool.h>
 #include <stdint.h>
@@ -14,7 +13,3 @@ extern volatile bool RGB_DIRTY;
 
 //Backlight Stuff
 extern volatile bool BACKLIT_DIRTY;
-
-
-
-#endif