Fix Caps Lock LEDs once and for all (#4824)

* Check the size of the SET_REPORT packet

If we have two bytes, that probably means the first is a report ID. The 6KRO interface may or may not have one, but the NKRO interface always does, so we need to check this regardless of whether KEYBOARD_SHARED_EP is defined.

* Fix indentation

.travis.yml

@@ -19,6 +19,7 @@ install:
 before_script:
   - avr-gcc --version
 script:
+- git rev-parse --short HEAD
 - make test:all AUTOGEN=false
 - bash util/travis_build.sh
 - bash util/travis_docs.sh
@@ -33,7 +34,7 @@ addons:
     - diffutils
     - dos2unix
     - doxygen
-after_success: 
+after_success:
   bash util/travis_compiled_push.sh
 notifications:
   webhooks:

build_keyboard.mk

@@ -16,6 +16,7 @@ include common.mk
 KEYBOARD_FILESAFE := $(subst /,_,$(KEYBOARD))
 TARGET ?= $(KEYBOARD_FILESAFE)_$(KEYMAP)
 KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD_FILESAFE)
+STM32_PATH := quantum/stm32
 
 # Force expansion
 TARGET := $(TARGET)
@@ -72,6 +73,7 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
     KEYBOARD_PATHS += $(KEYBOARD_PATH_1)
 endif
 
+
 # Pull in rules.mk files from all our subfolders
 ifneq ("$(wildcard $(KEYBOARD_PATH_5)/rules.mk)","")
     include $(KEYBOARD_PATH_5)/rules.mk
@@ -89,6 +91,58 @@ ifneq ("$(wildcard $(KEYBOARD_PATH_1)/rules.mk)","")
     include $(KEYBOARD_PATH_1)/rules.mk
 endif
 
+
+MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
+MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
+
+ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_5)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_4)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_3)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_2)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
+else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
+    -include $(MAIN_KEYMAP_PATH_1)/rules.mk
+    KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
+    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
+else ifneq ($(LAYOUTS),)
+    include build_layout.mk
+else
+    $(error Could not find keymap)
+    # this state should never be reached
+endif
+
+ifeq ($(strip $(CTPC)), yes)
+  CONVERT_TO_PROTON_C=yes
+endif
+
+ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
+    TARGET := $(TARGET)_proton_c
+    include $(STM32_PATH)/proton_c.mk
+    OPT_DEFS += -DCONVERT_TO_PROTON_C
+endif
+
+include quantum/mcu_selection.mk
+
+ifdef MCU_FAMILY
+    OPT_DEFS += -DQMK_STM32
+    KEYBOARD_PATHS += $(STM32_PATH)
+endif
+
+
 # Find all the C source files to be compiled in subfolders.
 KEYBOARD_SRC :=
 
@@ -227,39 +281,6 @@ PROJECT_DEFS := $(OPT_DEFS)
 PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS)
 PROJECT_CONFIG := $(CONFIG_H)
 
-MAIN_KEYMAP_PATH_1 := $(KEYBOARD_PATH_1)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_2 := $(KEYBOARD_PATH_2)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_3 := $(KEYBOARD_PATH_3)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_4 := $(KEYBOARD_PATH_4)/keymaps/$(KEYMAP)
-MAIN_KEYMAP_PATH_5 := $(KEYBOARD_PATH_5)/keymaps/$(KEYMAP)
-
-ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_5)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_5)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_5)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_5)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_4)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_4)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_4)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_4)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_3)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_3)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_3)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_3)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_2)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_2)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_2)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_2)
-else ifneq ("$(wildcard $(MAIN_KEYMAP_PATH_1)/keymap.c)","")
-    -include $(MAIN_KEYMAP_PATH_1)/rules.mk
-    KEYMAP_C := $(MAIN_KEYMAP_PATH_1)/keymap.c
-    KEYMAP_PATH := $(MAIN_KEYMAP_PATH_1)
-else ifneq ($(LAYOUTS),)
-    include build_layout.mk
-else
-    $(error Could not find keymap)
-    # this state should never be reached
-endif
-
 # Userspace setup and definitions
 ifeq ("$(USER_NAME)","")
     USER_NAME := $(KEYMAP)

common.mk

@@ -21,5 +21,4 @@ COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
 COMMON_VPATH += $(QUANTUM_PATH)/audio
 COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
 COMMON_VPATH += $(QUANTUM_PATH)/api
-COMMON_VPATH += $(QUANTUM_PATH)/split_common
 COMMON_VPATH += $(DRIVER_PATH)

common_features.mk

@@ -263,14 +263,10 @@ ifneq ($(strip $(CUSTOM_MATRIX)), yes)
 endif
 
 ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
-    SERIAL_BACKWARD_COMPAT := $(wildcard $(QUANTUM_DIR)/split_common/serial_backward_compatibility.h)
-    ifneq ($(SERIAL_BACKWARD_COMPAT),)
-      CONFIG_H += $(SERIAL_BACKWARD_COMPAT)
-      # $(info CONFIG_H=$(CONFIG_H))
-    endif
     OPT_DEFS += -DSPLIT_KEYBOARD
     QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
                 $(QUANTUM_DIR)/split_common/split_util.c
     QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/i2c.c
     QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/serial.c
+    COMMON_VPATH += $(QUANTUM_PATH)/split_common
 endif

docs/_sidebar.md

@@ -1,100 +0,0 @@
-* [Complete Newbs Guide](newbs.md)
-  * [Getting Started](newbs_getting_started.md)
-  * [Building Your First Firmware](newbs_building_firmware.md)
-  * [Flashing Firmware](newbs_flashing.md)
-  * [Testing and Debugging](newbs_testing_debugging.md)
-  * [Best Practices](newbs_best_practices.md)
-  * [Learning Resources](newbs_learn_more_resources.md)
-
-* [QMK Basics](README.md)
-  * [QMK Introduction](getting_started_introduction.md)
-  * [Contributing to QMK](contributing.md)
-  * [How to Use Github](getting_started_github.md)
-  * [Getting Help](getting_started_getting_help.md)
-
-* [FAQ](faq.md)
-  * [General FAQ](faq_general.md)
-  * [Build/Compile QMK](faq_build.md)
-  * [Debugging/Troubleshooting QMK](faq_debug.md)
-  * [Keymap](faq_keymap.md)
-
-* Detailed Guides
-  * [Install Build Tools](getting_started_build_tools.md)
-  * [Vagrant Guide](getting_started_vagrant.md)
-  * [Build/Compile Instructions](getting_started_make_guide.md)
-  * [Flashing Firmware](flashing.md)
-  * [Customizing Functionality](custom_quantum_functions.md)
-  * [Keymap Overview](keymap.md)
-
-* [Hardware](hardware.md)
-  * [AVR Processors](hardware_avr.md)
-  * [Drivers](hardware_drivers.md)
-
-* Reference
-  * [Keyboard Guidelines](hardware_keyboard_guidelines.md)
-  * [Config Options](config_options.md)
-  * [Keycodes](keycodes.md)
-  * [Documentation Best Practices](documentation_best_practices.md)
-  * [Documentation Templates](documentation_templates.md)
-  * [Glossary](reference_glossary.md)
-  * [Unit Testing](unit_testing.md)
-  * [Useful Functions](ref_functions.md)
-  * [Configurator Support](reference_configurator_support.md)
-
-* [Features](features.md)
-  * [Basic Keycodes](keycodes_basic.md)
-  * [US ANSI Shifted Keys](keycodes_us_ansi_shifted.md)
-  * [Quantum Keycodes](quantum_keycodes.md)
-  * [Advanced Keycodes](feature_advanced_keycodes.md)
-  * [Audio](feature_audio.md)
-  * [Auto Shift](feature_auto_shift.md)
-  * [Backlight](feature_backlight.md)
-  * [Bluetooth](feature_bluetooth.md)
-  * [Bootmagic](feature_bootmagic.md)
-  * [Combos](feature_combo)
-  * [Command](feature_command.md)
-  * [Dynamic Macros](feature_dynamic_macros.md)
-  * [Encoders](feature_encoders.md)
-  * [Grave Escape](feature_grave_esc.md)
-  * [Key Lock](feature_key_lock.md)
-  * [Layouts](feature_layouts.md)
-  * [Leader Key](feature_leader_key.md)
-  * [Macros](feature_macros.md)
-  * [Mouse Keys](feature_mouse_keys.md)
-  * [One Shot Keys](feature_advanced_keycodes.md#one-shot-keys)
-  * [Pointing Device](feature_pointing_device.md)
-  * [PS/2 Mouse](feature_ps2_mouse.md)
-  * [RGB Lighting](feature_rgblight.md)
-  * [RGB Matrix](feature_rgb_matrix.md)
-  * [Space Cadet Shift](feature_space_cadet_shift.md)
-  * [Space Cadet Shift Enter](feature_space_cadet_shift_enter.md)
-  * [Stenography](feature_stenography.md)
-  * [Swap Hands](feature_swap_hands.md)
-  * [Tap Dance](feature_tap_dance.md)
-  * [Terminal](feature_terminal.md)
-  * [Thermal Printer](feature_thermal_printer.md)
-  * [Unicode](feature_unicode.md)
-  * [Userspace](feature_userspace.md)
-
-* For Makers and Modders
-  * [Hand Wiring Guide](hand_wire.md)
-  * [ISP Flashing Guide](isp_flashing_guide.md)
-  * [ARM Debugging Guide](arm_debugging.md)
-  * [I2C Driver](i2c_driver.md)
-
-* For a Deeper Understanding
-  * [How Keyboards Work](how_keyboards_work.md)
-  * [Understanding QMK](understanding_qmk.md)
-
-* Other Topics
-  * [Using Eclipse with QMK](eclipse.md)
-  * [Support](support.md)
-
-* QMK Internals (In Progress)
-  * [Defines](internals_defines.md)
-  * [Input Callback Reg](internals_input_callback_reg.md)
-  * [Midi Device](internals_midi_device.md)
-  * [Midi Device Setup Process](internals_midi_device_setup_process.md)
-  * [Midi Util](internals_midi_util.md)
-  * [Send Functions](internals_send_functions.md)
-  * [Sysex Tools](internals_sysex_tools.md)

docs/_summary.md

@@ -81,6 +81,8 @@
   * [ISP Flashing Guide](isp_flashing_guide.md)
   * [ARM Debugging Guide](arm_debugging.md)
   * [I2C Driver](i2c_driver.md)
+  * [GPIO Controls](internals_gpio_control.md)
+  * [Proton C Conversion](proton_c_conversion.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/config_options.md

@@ -109,9 +109,9 @@ If you define these options you will disable the associated feature, which can s
 * `#define NO_ACTION_ONESHOT`
   * disable one-shot modifiers
 * `#define NO_ACTION_MACRO`
-  * disable all macro handling
+  * disable old style macro handling: MACRO() & action_get_macro
 * `#define NO_ACTION_FUNCTION`
-  * disable the action function (deprecated)
+  * disable calling of action_function() from the fn_actions array (deprecated)
 
 ## Features That Can Be Enabled
 
@@ -143,8 +143,11 @@ If you define these options you will enable the associated feature, which may in
   * Breaks any Tap Toggle functionality (`TT` or the One Shot Tap Toggle)
 * `#define LEADER_TIMEOUT 300`
   * how long before the leader key times out
+    * If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped. 
 * `#define LEADER_PER_KEY_TIMING`
   * sets the timer for leader key chords to run on each key press rather than overall
+* `#define LEADER_KEY_STRICT_KEY_PROCESSING`
+  * Disables keycode filtering for Mod-Tap and Layer-Tap keycodes. Eg, if you enable this, you would need to specify `MT(MOD_CTL, KC_A)` if you want to use `KC_A`.
 * `#define ONESHOT_TIMEOUT 300`
   * how long before oneshot times out
 * `#define ONESHOT_TAP_TOGGLE 2`
@@ -194,8 +197,27 @@ If you define these options you will enable the associated feature, which may in
 
 Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
 
-* `#define SPLIT_HAND_PIN B7`
+### Setting Handedness
-  * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace 'B7' with the pin you are using. This is optional and you can still use the EEHANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
+
+One thing to remember, the side that the USB port is plugged into is always the master half. The side not plugged into USB is the slave.
+
+There are a few different ways to set handedness for split keyboards (listed in order of precedence):
+
+1. Set `SPLIT_HAND_PIN`: Reads a pin to determine handedness. If pin is high, it's the left side, if low, the half is determined to be the right side
+2. Set `EE_HANDS` and flash `eeprom-lefthand.eep`/`eeprom-righthand.eep` to each half
+3. Set `MASTER_RIGHT`: Half that is plugged into the USB port is determined to be the master and right half (inverse of the default)
+4. Default: The side that is plugged into the USB port is the master half and is assumed to be the left half. The slave side is the right half
+
+* `#define SPLIT_HAND_PIN B7` 
+  * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace `B7` with the pin you are using. This is optional, and if you leave `SPLIT_HAND_PIN` undefined, then you can still use the EE_HANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
+
+* `#define EE_HANDS` (only works if `SPLIT_HAND_PIN` is not defined)
+  * Reads the handedness value stored in the EEPROM after `eeprom-lefthand.eep`/`eeprom-righthand.eep` has been flashed to their respective halves.
+
+* `#define MASTER_RIGHT`
+  * Master half is defined to be the right half.
+
+### Other Options
 
 * `#define USE_I2C`
   * For using I2C instead of Serial (defaults to serial)
@@ -203,6 +225,20 @@ Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in yo
 * `#define SOFT_SERIAL_PIN D0`
   * When using serial, define this. `D0` or `D1`,`D2`,`D3`,`E6`.
 
+* `#define MATRIX_ROW_PINS_RIGHT { <row pins> }`
+* `#define MATRIX_COL_PINS_RIGHT { <col pins> }`
+  * If you want to specify a different pinout for the right half than the left half, you can define `MATRIX_ROW_PINS_RIGHT`/`MATRIX_COL_PINS_RIGHT`. Currently, the size of `MATRIX_ROW_PINS` must be the same as `MATRIX_ROW_PINS_RIGHT` and likewise for the definition of columns.
+
+* `#define SELECT_SOFT_SERIAL_SPEED <speed>` (default speed is 1)
+  * Sets the protocol speed when using serial communication
+  * Speeds:
+    * 0: about 189kbps (Experimental only)
+    * 1: about 137kbps (default)
+    * 2: about 75kbps
+    * 3: about 39kbps
+    * 4: about 26kbps
+    * 5: about 20kbps
+
 # The `rules.mk` File
 
 This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.

docs/feature_advanced_keycodes.md

@@ -21,7 +21,7 @@ Additionally, if at least one right-handed modifier is specified in a Mod Tap or
 
 # Switching and Toggling Layers
 
-These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers)
+These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers) When using momentary layer switching with MO(), LM(), TT(), or LT(), make sure to leave the key on the above layers transparent or it may not work as intended.
 
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
@@ -107,23 +107,23 @@ This key would activate Left Control and Left Shift when held, and send Escape w
 
 For convenience, QMK includes some Mod-Tap shortcuts to make common combinations more compact in your keymap:
 
-|Key         |Aliases                                |Description                                            |
+|Key         |Aliases                                                          |Description                                            |
-|------------|---------------------------------------|-------------------------------------------------------|
+|------------|-----------------------------------------------------------------|-------------------------------------------------------|
-|`LCTL_T(kc)`|`CTL_T(kc)`                            |Left Control when held, `kc` when tapped               |
+|`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
-|`RCTL_T(kc)`|                                       |Right Control when held, `kc` when tapped              |
+|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
-|`LSFT_T(kc)`|`SFT_T(kc)`                            |Left Shift when held, `kc` when tapped                 |
+|`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
-|`RSFT_T(kc)`|                                       |Right Shift when held, `kc` when tapped                |
+|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
-|`LALT_T(kc)`|`ALT_T(kc)`                            |Left Alt when held, `kc` when tapped                   |
+|`LALT_T(kc)`|`ALT_T(kc)`                                                      |Left Alt when held, `kc` when tapped                   |
-|`RALT_T(kc)`|`ALGR_T(kc)`                           |Right Alt when held, `kc` when tapped                  |
+|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
-|`LGUI_T(kc)`|`LCMD_T(kc)`, `RWIN_T(kc)`, `GUI_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
-|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`             |Right GUI when held, `kc` when tapped                  |
+|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
-|`C_S_T(kc)` |                                       |Left Control and Shift when held, `kc` when tapped     |
+|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                       |Left Control, Shift and Alt when held, `kc` when tapped|
+|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
-|`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
+|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
-|`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
+|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
-|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
-|`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
+|`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
 
 ## Caveats
 

docs/feature_leader_key.md

@@ -5,10 +5,11 @@ If you've ever used Vim, you know what a Leader key is. If not, you're about to
 That's what `KC_LEAD` does. Here's an example:
 
 1. Pick a key on your keyboard you want to use as the Leader key. Assign it the keycode `KC_LEAD`. This key would be dedicated just for this -- it's a single action key, can't be used for anything else.
-2. Include the line `#define LEADER_TIMEOUT 300` in your config.h. The 300 there is 300ms -- that's how long you have for the sequence of keys following the leader. You can tweak this value for comfort, of course.
+2. Include the line `#define LEADER_TIMEOUT 300` in your `config.h`. This sets the timeout for the `KC_LEAD` key.  Specifically, when you press the `KC_LEAD` key, you only have a certain amount of time to complete the Leader Key sequence.  The `300` here sets that to 300ms, and you can increase this value to give you more time to hit the sequence. But any keys pressed during this timeout are intercepted and not sent, so you may want to keep this value low. .  
-3. Within your `matrix_scan_user` function, do something like this:
+   * By default, this timeout is how long after pressing `KC_LEAD` to complete your entire sequence. This may be very low for some people. So you may want to increase this timeout.  Optionally, you may want to enable the `LEADER_PER_KEY_TIMING` option, which resets the timeout after each key is tapped.  This allows you to maintain a low value here, but still be able to use the longer sequences.   To enable this option, add `#define LEADER_PER_KEY_TIMING` to your `config.h`.
+3. Within your `matrix_scan_user` function, add something like this:
 
-```
+```c
 LEADER_EXTERNS();
 
 void matrix_scan_user(void) {
@@ -44,7 +45,7 @@ Each of these accepts one or more keycodes as arguments. This is an important po
 
 To add support for Leader Key you simply need to add a single line to your keymap's `rules.mk`:
 
-```
+```make
 LEADER_ENABLE = yes
 ```
 
@@ -53,20 +54,93 @@ LEADER_ENABLE = yes
 Rather than relying on an incredibly high timeout for long leader key strings or those of us without 200wpm typing skills, we can enable per key timing to ensure that each key pressed provides us with more time to finish our stroke. This is incredibly helpful with leader key emulation of tap dance (read: multiple taps of the same key like C, C, C).
 
 In order to enable this, place this in your `config.h`:
-```
+```c
 #define LEADER_PER_KEY_TIMING
 ```
 
 After this, it's recommended that you lower your `LEADER_TIMEOUT` to something less that 300ms.
 
-```
+```c
 #define LEADER_TIMEOUT 250
 ```
 
 Now, something like this won't seem impossible to do without a 1000MS leader key timeout:
 
-```
+```c
 SEQ_THREE_KEYS(KC_C, KC_C, KC_C) {
   SEND_STRING("Per key timing is great!!!");
 }
 ```
+
+## Strict Key Processing
+
+By default, the Leader Key feature will filter the keycode out of [`Mod-Tap`](feature_advanced_keycodes.md#mod-tap) and [`Layer Tap`](feature_advanced_keycodes.md#switching-and-toggling-layers) functions when checking for the Leader sequences. That means if you're using `LT(3, KC_A)`, it will pick this up as `KC_A` for the sequence, rather than `LT(3, KC_A)`, giving a more expected behavior for newer users.
+
+While, this may be fine for most, if you want to specify the whole keycode (eg, `LT(3, KC_A)` from the example above) in the sequence, you can enable this by added `#define LEADER_KEY_STRICT_KEY_PROCESSING` to your `config.h` file.  This well then disable the filtering, and you'll need to specify the whole keycode.
+
+## Customization 
+
+The Leader Key feature has some additional customization to how the Leader Key feature works.  It has two functions that can be called at certain parts of the process.  Namely `leader_start()` and `leader_end()`.
+
+The `leader_start()` function is called when you tap the `KC_LEAD` key, and the `leader_end()` function is called when either the leader sequence is completed, or the leader timeout is hit. 
+
+You can add these functions to your code (`keymap.c` usually) to add feedback to the Leader sequences (such as beeping or playing music).
+
+```c
+void leader_start(void) {
+  // sequence started
+}
+
+void leader_end(void) {
+  // sequence ended (no success/failuer detection)
+}
+```
+
+### Example
+
+This example will play the Mario "One Up" sound when you hit `KC_LEAD` to start the Leader Sequence, and will play "All Star" if it completes successfully or "Rick Roll" you if it fails. 
+
+```c
+bool did_leader_succeed;
+#ifdef AUDIO_ENABLE
+float leader_start[][2] = SONG(ONE_UP_SOUND );
+float leader_succeed[][2] = SONG(ALL_STAR);
+float leader_fail[][2] = SONG(RICK_ROLL);
+#endif
+LEADER_EXTERNS();
+
+void matrix_scan_user(void) {
+  LEADER_DICTIONARY() {
+    did_leader_succeed = leading = false;
+
+    SEQ_ONE_KEY(KC_E) {
+      // Anything you can do in a macro.
+      SEND_STRING(SS_LCTRL(SS_LSFT("t")));
+      did_leader_succeed = true;
+    } else 
+    SEQ_TWO_KEYS(KC_E, KC_D) {
+      SEND_STRING(SS_LGUI("r")"cmd"SS_TAP(KC_ENTER)SS_LCTRL("c"));
+      did_leader_succeed = true;
+    }
+    leader_end();
+  }
+}
+
+void leader_start(void) {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(leader_start);
+#endif
+}
+
+void leader_end(void) {
+  if (did_leader_succeed) {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(leader_succeed);
+#endif
+  } else {
+#ifdef AUDIO_ENABLE
+    PLAY_SONG(leader_fail);
+#endif
+  }
+}
+```

docs/feature_unicode.md

@@ -2,15 +2,15 @@
 
 There are three Unicode keymap definition methods available in QMK:
 
-## UNICODE_ENABLE
+## `UNICODE_ENABLE`
 
-Supports Unicode up to `0xFFFF`. The keycode function is `UC(n)` in the keymap file, where _n_ is a 4 digit hexadecimal number.
+Supports Unicode up to `0x7FFF`. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji. The keycode function is `UC(c)` in the keymap file, where _c_ is the code point's number (preferably hexadecimal, up to 4 digits long). For example: `UC(0x45B)`, `UC(0x30C4)`.
 
-## UNICODEMAP_ENABLE
+## `UNICODEMAP_ENABLE`
 
-Supports Unicode up to `0x10FFFF` (all possible code points). You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(n)`, where _n_ is an array index into the mapping table.
+Supports Unicode up to `0x10FFFF` (all possible code points). You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(i)`, where _i_ is an array index into the mapping table. The table may contain at most 1024 entries.
 
-And you may want to have an enum to make reference easier.  So you'd want to add something like this to your keymap:
+You may want to have an enum to make referencing easier. So, you could add something like this to your keymap file:
 
 ```c
 enum unicode_names {
@@ -20,38 +20,37 @@ enum unicode_names {
 };
 
 const uint32_t PROGMEM unicode_map[] = {
-  [BANG]    = 0x203D,  // ‽
+  [BANG]  = 0x203D,  // ‽
-  [IRONY]   = 0x2E2E,  // ⸮
+  [IRONY] = 0x2E2E,  // ⸮
-  [SNEK]    = 0x1F40D, // 🐍
+  [SNEK]  = 0x1F40D, // 🐍
-}:
+};
 ```
 
-Make sure that the order for both matches.
+Then you can use `X(BANG)` etc. in your keymap.
 
-## UCIS_ENABLE
+## `UCIS_ENABLE`
 
-Supports Unicode up to `0x10FFFF` (all possible code points). As with `UNICODEMAP`, you may want to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you will have to add a keycode or function that calls `qk_ucis_start()`. Once it's been called, you can type the mnemonic for your character, then hit Space or Enter to complete it or Esc to cancel. If the mnemonic matches an entry in your table, the typed text will automatically be erased and the corresponding Unicode sequence inserted.
+Supports Unicode up to `0x10FFFF` (all possible code points). As with `UNICODEMAP`, you need to maintain a mapping table in your keymap file. However, there are no built-in keycodes for this feature — you will have to add a keycode or function that calls `qk_ucis_start()`. Once this function's been called, you can type the corresponding mnemonic for your character, then hit Space or Enter to complete it, or Esc to cancel. If the mnemonic matches an entry in your table, the typed text will automatically be erased and the corresponding Unicode character inserted.
 
-For instance, you would need to have a table like this in your keymap:
+For instance, you would define a table like this in your keymap file:
 
 ```c
-const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE
+const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE(
-(
+  UCIS_SYM("poop", 0x1F4A9), // 💩
- UCIS_SYM("poop", 0x1f4a9),
+  UCIS_SYM("rofl", 0x1F923), // 🤣
- UCIS_SYM("rofl", 0x1f923),
+  UCIS_SYM("kiss", 0x1F619)  // 😙
- UCIS_SYM("kiss", 0x1f619)
 );
 ```
 
-You run the function, and then type "rofl" and hit enter, it should backspace remove "rofl" and input the `0x1f923` unicode.
+You call `qk_ucis_start()`, then type "rofl" and hit Enter. QMK should erase the "rofl" text and input the laughing emoji.
 
 ### Customization
 
-There are several functions that you can add to your keymap to customize the functionality of this feature.
+There are several functions that you can define in your keymap to customize the functionality of this feature.
 
-* `void qk_ucis_start_user(void)` - This runs when you run the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji.
+* `void qk_ucis_start_user(void)` – This runs when you call the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji.
-* `void qk_ucis_success(uint8_t symbol_index)` - This runs when the unicode input has matched something, and has completed. Default doesn't do anything.
+* `void qk_ucis_success(uint8_t symbol_index)` – This runs when the input has matched something and has completed. By default, it doesn't do anything.
-* `void qk_ucis_symbol_fallback (void)` - This runs if the input text doesn't match anything.  The default function falls back to trying that input as a unicode code.
+* `void qk_ucis_symbol_fallback (void)` – This runs when the input doesn't match anything. By default, it falls back to trying that input as a Unicode code.
 
 You can find the default implementations of these functions in [`process_ucis.c`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_ucis.c).
 
@@ -66,7 +65,7 @@ The following input modes are available:
   To enable, go to _System Preferences > Keyboard > Input Sources_, add _Unicode Hex Input_ to the list (it's under _Other_), then activate it from the input dropdown in the Menu Bar.
   By default, this mode uses the left Option key (`KC_LALT`), but this can be changed by defining [`UNICODE_OSX_KEY`](#input-key-configuration) with another keycode.
 
-* **`UC_LNX`**: Linux built-in IBus Unicode input. Supports all possible code points (`0x10FFFF`).
+* **`UC_LNX`**: Linux built-in IBus Unicode input. Supports code points up to `0x10FFFF` (all possible code points).
 
   Enabled by default and works almost anywhere on IBus-enabled distros. Without IBus, this mode works under GTK apps, but rarely anywhere else.
 
@@ -77,7 +76,7 @@ The following input modes are available:
 
 * **`UC_BSD`**: _(non implemented)_ Unicode input under BSD. Not implemented at this time. If you're a BSD user and want to help add support for it, please [open an issue on GitHub](https://github.com/qmk/qmk_firmware/issues).
 
-* **`UC_WINC`**: Windows Unicode input using [WinCompose](https://github.com/samhocevar/wincompose). As of v0.8.2, supports code points up to `0xFFFFF`.
+* **`UC_WINC`**: Windows Unicode input using [WinCompose](https://github.com/samhocevar/wincompose). As of v0.8.2, supports code points up to `0xFFFFF` (all currently assigned code points).
 
   To enable, install the [latest release](https://github.com/samhocevar/wincompose/releases/latest). Once installed, WinCompose will automatically run on startup. Works reliably under all version of Windows supported by the app.
   By default, this mode uses the right Alt key (`KC_RALT`), but this can be changed in the WinCompose settings and by defining [`UNICODE_WINC_KEY`](#input-key-configuration) with another keycode.

docs/getting_started_build_tools.md

@@ -41,6 +41,12 @@ Debian / Ubuntu example:
 Fedora / Red Hat example:
 
     sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
+    
+Arch / Manjaro example:
+
+    pacman -S base-devel gcc unzip wget zip avr-gcc avr-binutils avr-libc dfu-util arm-none-eabi-gcc arm-none-eabi-binutils arm-none-eabi-newlib git
+
+(the `dfu-programmer` package is availble on AUR only so you should download from there or use an AUR helper)
 
 ## Nix
 

docs/getting_started_make_guide.md

@@ -93,19 +93,17 @@ This enables MIDI sending and receiving with your keyboard. To enter MIDI send m
 
 `UNICODE_ENABLE`
 
-This allows you to send unicode symbols via `UC(<unicode>)` in your keymap. Only codes up to 0x7FFF are currently supported.
+This allows you to send Unicode characters using `UC(<code point>)` in your keymap. Code points up to `0x7FFF` are supported. This covers characters for most modern languages, as well as symbols, but it doesn't cover emoji.
 
 `UNICODEMAP_ENABLE`
 
-This allows sending unicode symbols using `X(<unicode>)` in your keymap. Codes
+This allows you to send Unicode characters using `X(<map index>)` in your keymap. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported. 
-up to 0xFFFFFFFF are supported, including emojis. You will need to maintain
-a separate mapping table in your keymap file.
 
-Known limitations:
+`UCIS_ENABLE`
-- Under Mac OS, only codes up to 0xFFFF are supported.
-- Under Linux ibus, only codes up to 0xFFFFF are supported (but anything important is still under this limit for now).
 
-Characters out of range supported by the OS will be ignored.
+This allows you to send Unicode characters by inputting a mnemonic corresponding to the character you want to send. You will need to maintain a mapping table in your keymap file. All possible code points (up to `0x10FFFF`) are supported.
+
+For further details, as well as limitations, see the [Unicode page](feature_unicode.md).
 
 `BLUETOOTH_ENABLE`
 
@@ -117,7 +115,7 @@ This allows you output audio on the C6 pin (needs abstracting). See the [audio p
 
 `FAUXCLICKY_ENABLE`
 
-Uses buzzer to emulate clicky switches. A cheap imitation of the Cherry blue switches. By default, uses the C6 pin, same as AUDIO_ENABLE.
+Uses buzzer to emulate clicky switches. A cheap imitation of the Cherry blue switches. By default, uses the C6 pin, same as `AUDIO_ENABLE`.
 
 `VARIABLE_TRACE`
 

docs/index.html

@@ -17,7 +17,7 @@
       name: 'QMK Firmware',
       nameLink: 'https://qmk.fm/',
       repo: 'qmk/qmk_firmware',
-      loadSidebar: true,
+      loadSidebar: '_summary.md',
       auto2top: true,
       formatUpdated: '{YYYY}/{MM}/{DD} {HH}:{mm}',
       search: {

docs/keycodes.md

@@ -342,23 +342,23 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Mod-Tap Keys](feature_advanced_keycodes.md#mod-tap)
 
-|Key         |Aliases                                |Description                                            |
+|Key         |Aliases                                                          |Description                                            |
-|------------|---------------------------------------|-------------------------------------------------------|
+|------------|-----------------------------------------------------------------|-------------------------------------------------------|
-|`LCTL_T(kc)`|`CTL_T(kc)`                            |Left Control when held, `kc` when tapped               |
+|`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
-|`RCTL_T(kc)`|                                       |Right Control when held, `kc` when tapped              |
+|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
-|`LSFT_T(kc)`|`SFT_T(kc)`                            |Left Shift when held, `kc` when tapped                 |
+|`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
-|`RSFT_T(kc)`|                                       |Right Shift when held, `kc` when tapped                |
+|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
-|`LALT_T(kc)`|`ALT_T(kc)`                            |Left Alt when held, `kc` when tapped                   |
+|`LALT_T(kc)`|`ALT_T(kc)`                                                      |Left Alt when held, `kc` when tapped                   |
-|`RALT_T(kc)`|`ALGR_T(kc)`                           |Right Alt when held, `kc` when tapped                  |
+|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
-|`LGUI_T(kc)`|`LCMD_T(kc)`, `RWIN_T(kc)`, `GUI_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
-|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`             |Right GUI when held, `kc` when tapped                  |
+|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
-|`C_S_T(kc)` |                                       |Left Control and Shift when held, `kc` when tapped     |
+|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                       |Left Control, Shift and Alt when held, `kc` when tapped|
+|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
-|`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
+|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
-|`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
+|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
-|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
-|`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
+|`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
 
 ## [RGB Lighting](feature_rgblight.md)
 
@@ -454,7 +454,7 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Unicode Support](feature_unicode.md)
 
-|Key         |Aliases|                                                 |
+|Key    |Description                                                                |
-|------------|-------|-------------------------------------------------|
+|-------|---------------------------------------------------------------------------|
-|`UNICODE(n)`|`UC(n)`|Send Unicode character `n`                       |
+|`UC(c)`|Send Unicode code point `c` (`UNICODE_ENABLE`)                             |
-|`X(n)`      |       |Send Unicode character `n` via a different method|
+|`X(i)` |Send Unicode code point at index `i` in `unicode_map` (`UNICODEMAP_ENABLE`)|

docs/proton_c_conversion.md

@@ -0,0 +1,21 @@
+# Converting a board to use the Proton C
+
+If a board currently supported in QMK uses a Pro Micro (or compatible board) and you want to use the Proton C, you can generate the firmware by appending `CONVERT_TO_PROTON_C=yes` (or `CTPC=yes`) to your make argument, like this:
+
+    make 40percentclub/mf68:default CTPC=yes
+
+You can add the same argument to your keymap's `rules.mk`, which will accomplish the same thing.
+
+This exposes the `CONVERT_TO_PROTON_C` flag that you can use in your code with `#ifdef`s, like this:
+
+    #ifdef CONVERT_TO_PROTON_C
+        // Proton C code
+    #else
+        // Pro Micro code
+    #endif
+
+Before being able to compile, you may get some errors about `PORTB/DDRB`, etc not being defined, so you'll need to convert the keyboard's code to use the [GPIO Controls](internals_gpio_control.md) that will work for both ARM and AVR. This shouldn't affect the AVR builds at all.
+
+The Proton C only has one on-board LED (C13), and by default, the TXLED (D5) is mapped to it. If you want the RXLED (B0) mapped to it instead, add this like to your `config.h`:
+
+    #define CONVERT_TO_PROTON_C_RXLED

docs/understanding_qmk.md

@@ -12,7 +12,7 @@ You can think of QMK as no different from any other computer program. It is star
 
 The reason for this is the different platforms that QMK supports. The most common platform is `lufa`, which runs on AVR processors such at the atmega32u4. We also support `chibios` and `vusb`.
 
-We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1019). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1060). This is [The Main Loop](#the-main-loop).
+We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/protocol/lufa/lufa.c#L1028). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/protocol/lufa/lufa.c#L1069). This is [The Main Loop](#the-main-loop).
 
 ## The Main Loop
 
@@ -22,7 +22,7 @@ This section of code is called "The Main Loop" because it's responsible for loop
     keyboard_task();
 ```
 
-This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/common/keyboard.c#L206), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
+This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/keyboard.c#L216), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
 
 Within `keyboard_task()` you'll find code to handle:
 
@@ -77,7 +77,7 @@ At the keyboard level we define a C macro (typically named `KEYMAP()`) which map
 
 Notice how the second block of our `KEYMAP()` macro matches the Matrix Scanning array above? This macro is what will map the matrix scanning array to keycodes. However, if you look at a 17 key numpad you'll notice that it has 3 places where the matrix could have a switch but doesn't, due to larger keys. We have populated those spaces with `KC_NO` so that our keymap definition doesn't have to.
 
-You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
+You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
 
 ##### Keycode Assignment
 
@@ -130,31 +130,33 @@ Comparing against our keymap we can see that the pressed key is KC_NLCK. From he
 
 ##### Process Record
 
-The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions.  Depending on options set in rule.mk or elsewhere, only a subset of the functions below will be included in final firmware.
+The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions. Depending on options set in `rules.mk` or elsewhere, only a subset of the functions below will be included in final firmware.
 
-* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/tmk_core/common/action.c#L172)
+* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/action.c#L172)
-  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L193)
+  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L206)
-    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L213)
+    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L226)
-    * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_tap_dance.c#L115)
+    * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L119)
-    * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_key_lock.c#L62)
+    * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_key_lock.c#L62)
-    * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_clicky.c#L44)
+    * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_clicky.c#L79)
-    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/card.c#L20)
+    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20)
-      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
+      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
-    * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/fdd0f915271f79b104aa5d216566bcc3fd134e85/quantum/rgb_matrix.c#L139)
+    * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/rgb_matrix.c#L139)
-    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_midi.c#L81)
+    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_midi.c#L81)
-    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_audio.c#L19)
+    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_audio.c#L19)
-    * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_steno.c#L160)
+    * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_steno.c#L160)
-    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_music.c#L114)
+    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_music.c#L114)
-    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_tap_dance.c#L136)
+    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L141)
-    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_leader.c#L38)
+    * [`bool process_unicode_common(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode_common.c#L169)
-    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_combo.c#L115)
+      calls one of:
-    * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicode.c#L22)
+        * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode.c#L20)
-    * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_ucis.c#L91)
+        * [`bool process_unicodemap(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicodemap.c#L46)
-    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_printer.c#L77)
+        * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_ucis.c#L95)
-    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_auto_shift.c#L94)
+    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_leader.c#L51)
-    * [`bool process_unicode_map(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicodemap.c#L47)
+    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115)
-    * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_terminal.c#L264)
+    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77)
-    * [Identify and process quantum specific keycodes](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/quantum.c#L287)
+    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94)
+    * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264)
+    * [Identify and process Quantum-specific keycodes](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291)
 
 At any step during this chain of events a function (such as `process_record_kb()`) can `return false` to halt all further processing.
 

drivers/arm/i2c_master.c

@@ -45,16 +45,14 @@ static const I2CConfig i2cconfig = {
 __attribute__ ((weak))
 void i2c_init(void)
 {
-  //palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT);
-
   // Try releasing special pins for a short time
   palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
   palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
 
   chThdSleepMilliseconds(10);
  
-  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+  palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
-  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
+  palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
 
   //i2cInit(); //This is invoked by halInit() so no need to redo it.
 }

drivers/avr/i2c_master.c

@@ -179,6 +179,9 @@ i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16
   status = i2c_write(regaddr, timeout);
   if (status) return status;
 
+  status = i2c_stop(timeout);
+  if (status) return status;
+
   status = i2c_start(devaddr | 0x01, timeout);
   if (status) return status;
 
@@ -217,4 +220,4 @@ i2c_status_t i2c_stop(uint16_t timeout)
   }
 
   return I2C_STATUS_SUCCESS;
-}
+}

drivers/boards/GENERIC_STM32_F303XC/board.h

@@ -18,14 +18,14 @@
 #define _BOARD_H_
 
 /*
- * Setup for Clueboard 60% Keyboard
+ * Setup for Generic STM32_F303 Board
  */
 
 /*
  * Board identifier.
  */
 #define BOARD_GENERIC_STM32_F303XC
-#define BOARD_NAME                  "Planck PCB"
+#define BOARD_NAME                  "STM32_F303"
 
 /*
  * Board oscillators-related settings.

drivers/issi/is31fl3733.c

@@ -24,10 +24,10 @@
 #include "wait.h"
 #endif
 
+#include "is31fl3733.h"
 #include <string.h>
 #include "i2c_master.h"
 #include "progmem.h"
-#include "rgb_matrix.h"
 
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)

keyboards/1upkeyboards/sweet16/keymaps/default/keymap.c

@@ -6,9 +6,9 @@ enum custom_keycodes {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     LAYOUT_ortho_4x4(
-        KC_7, KC_8,   KC_9,   KC_ASTR, 
+        KC_7, KC_8,   KC_9,   KC_ASTR,
-        KC_4, KC_5,   KC_6,   KC_SLSH, 
+        KC_4, KC_5,   KC_6,   KC_SLSH,
-        KC_1, KC_2,   KC_3,   KC_MINS, 
+        KC_1, KC_2,   KC_3,   KC_MINS,
         KC_0, KC_ENT, KC_DOT, KC_EQL
     )
 };
@@ -27,6 +27,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
 void led_set_user(uint8_t usb_led) {
 
+  #ifndef CONVERT_TO_PROTON_C
   /* Map RXLED to USB_LED_NUM_LOCK */
 	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
 		DDRB |= (1 << 0); PORTB &= ~(1 << 0);
@@ -40,4 +41,5 @@ void led_set_user(uint8_t usb_led) {
 	} else {
 		DDRD &= ~(1 << 5); PORTD &= ~(1 << 5);
 	}
+  #endif
 }

keyboards/6ball/keymaps/default/rules.mk

@@ -1,3 +0,0 @@
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/9key/keymaps/default/rules.mk

@@ -1,3 +0,0 @@
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/alpha/keymaps/vderm/README.md

@@ -0,0 +1,35 @@
+# Alpha 28-Key Keyboard Alternate Keymap
+Alternate keymap for [Alpha 28-key keyboard](https://github.com/qmk/qmk_firmware/tree/master/keyboards/alpha).
+
+## How-to
+Assuming you've followed all the instructions from the original post, put my "keymap.c" file in "$qmk-firmware-folder$/keyboards/alpha/keymaps/vderm/" and then run your make command ("make alpha:vderm" while in $qmk-firmware-folder$ where this folder is what you've downloaded from the official github page) to compile the hex file to upload to your microcontroller. I've also uploaded my hex file.
+
+## Description
+Instead of going up and down layers like in the original Alpha keyboard, I've made the bottom row keys all have alternate functions:
++ Like in the original Alpha28 keymap, the 2U spacebar is a shift key when held down and space when tapped
++ Z and M are Ctrl keys when held down or Z and M when tapped
++ X and N are Alt keys
++ C activates the function keys layer (arrows, page up/dn, esc, tab, etc.)
++ V activates the characters and numbers layer
++ C and V combined activated the F-keys layer (F1, F2, F3, etc.)
++ The enter key is an enter key in the home layer, backspace in the function keys and characters/numbers layer and a delete in the F-keys layer
++ While in the other layers, the bottom row acts like a "regular" bottom modified row: ctrl, alt, winkey
+
+## Keymap
+![keymap](https://imgur.com/ZbDz0eL.jpg)
+
+## Build Images
+Here is my keyboard.
++ Switches: Aliaz Silent Switches (Tactile), PCB mount, 80g from [KBDfans](https://kbdfans.cn/collections/aliaz-switches/products/pre-orderaliaz-silent-switch-tactile?variant=2519899832333)
++ PCB board: ordered from JLCPCB, in white
++ Keycaps: ebay, can't find link :S
++ Bottom plate: I cut a piece of canary wood that was laying around, needs to be varnished; I also need to actually screw the pcb to the wood instead of relying on double-sided tape
+
+![vderm_alpha0](https://imgur.com/MjjoVtr.jpg)
+![vderm_alpha1](https://imgur.com/mIFu9WV.jpg)
+![vderm_alpha2](https://imgur.com/A70Iemw.jpg)
+![vderm_alpha3](https://imgur.com/eYljPWh.jpg)
+![vderm_alpha4](https://imgur.com/OhUKowj.jpg)
+
+Good luck on your build!  
+//vderm

keyboards/alpha/keymaps/vderm/keymap.c

@@ -0,0 +1,34 @@
+#include QMK_KEYBOARD_H
+
+#define HOME 0
+#define FN 1
+#define FNCHAR 2
+#define FKEYS 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[HOME] = LAYOUT(
+		KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
+		KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
+		MT(MOD_LCTL, KC_Z), MT(MOD_LALT, KC_X), LT(1, KC_C), LT(2, KC_V), MT(MOD_LSFT, KC_SPC), MT(MOD_RGUI,KC_B), MT(MOD_RALT, KC_N), MT(MOD_RCTL, KC_M)),
+
+	[FN] = LAYOUT(
+		KC_ESC, KC__MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_NO,
+		KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_BSPC,
+		KC_LCTL, KC_LALT, KC_TRNS, MO(3), MT(MOD_LSFT, KC_SPC), KC_RGUI, KC_RALT, KC_RCTL),
+
+	[FNCHAR] = LAYOUT(
+		KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
+		KC_GRV,KC_NO,KC_MINS,KC_EQL,KC_BSLS,KC_LBRC,KC_RBRC,KC_SCLN,KC_QUOT,KC_BSPC,
+		KC_LCTL, KC_LALT, MO(3), KC_TRNS, MT(MOD_LSFT, KC_SPC), KC_COMM, KC_DOT, KC_SLSH),
+
+	[FKEYS] = LAYOUT(
+		KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
+		KC_F11,KC_F12,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_NO,KC_DEL,
+		KC_LCTL, KC_LALT, KC_TRNS, KC_TRNS, MT(MOD_LSFT, KC_SPC), KC_RGUI, KC_RALT, KC_RCTL),
+};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}

keyboards/alps64/keymaps/mechmerlin/keymap.c

@@ -0,0 +1,26 @@
+#include QMK_KEYBOARD_H
+#include "mechmerlin.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* 0: qwerty */
+  [_BL] = LAYOUT_infinity( \
+      KC_GESC, KC_1,    KC_2,    KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_BSPC, \
+      KC_TAB,  KC_Q,    KC_W,    KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          \
+      KC_CTCP, KC_A,    KC_S,    KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    \
+      KC_LSFT, KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, TG(_AL),                   \
+      KC_LCTL, KC_LGUI, KC_LALT,                 KC_SPC,                                   MO(_FL), KC_RALT, KC_RGUI, KC_RCTL),
+
+  [_FL] = LAYOUT_infinity( \
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_F13, KC_DEL, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,        \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                 \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS,                 \
+      KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+  [_AL] = LAYOUT_infinity( \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   \
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RSFT_T(KC_UP), KC_TRNS,             \
+      KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,                                     KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT),
+};

keyboards/alps64/keymaps/mechmerlin/readme.md

@@ -0,0 +1,10 @@
+# MechMerlin Alps64 Infinity Keymap
+
+This is the 60% infinity layout used by u/merlin36, host of the [MechMerlin](www.youtube.com/mechmerlin) 
+YouTube channel.
+
+## Keymap Notes
+- `Caps Lock` can be held to act as a `Left Control`
+
+### Build
+To build the firmware file associated with this keymap, simply run `make alps64:mechmerlin`.

keyboards/alps64/readme.md

@@ -1,14 +1,15 @@
-Alps64
+# Alps64
-===
 
-An Alps-only 60% board designed by Hasu.
+An Alps only 60% board designed by Hasu.
 
 Keyboard Maintainer: QMK Community  
 Hardware Supported: Alps64 PCB  
 Hardware Availability: https://geekhack.org/index.php?topic=69666.0
 
+QMK is not the Alps64 official firmware. To use the official tools, refer to  [TMK Keymap Editor](http://www.tmk-kbd.com/tmk_keyboard/editor/unimap/?alps64) or [TMK Keyboard Firmware on Github](https://github.com/tmk/tmk_keyboard).
+
 Make example for this keyboard (after setting up your build environment):
 
     make alps64:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/alu84/keymaps/turbomech/rules.mk

@@ -10,6 +10,3 @@ AUDIO_ENABLE ?= no
 RGBLIGHT_ENABLE ?= yes
 UNICODE_ENABLE ?= yes
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/amj40/keymaps/default/rules.mk

@@ -18,7 +18,3 @@ RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/amj60/keymaps/iso_split_rshift/rules.mk

@@ -18,6 +18,3 @@ RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/atom47/rev3/config.h

@@ -61,7 +61,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGB_DI_PIN F5    // The pin the LED strip is connected to
 #define RGBLED_NUM 6     // Number of LEDs in your strip
-
+#define RGBLIGHT_ANIMATIONS
 #define QMK_ESC_OUTPUT B7 // usually COL
 #define QMK_ESC_INPUT B3 // usually ROW
 #define QMK_LED E6

keyboards/atreus/keymaps/xk/rules.mk

@@ -13,6 +13,3 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk

@@ -16,6 +16,3 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk

@@ -16,6 +16,3 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.c

@@ -14,6 +14,11 @@
     limitations under the License.
 */
 
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
 #include "hal.h"
 
 #if HAL_USE_PAL || defined(__DOXYGEN__)
@@ -74,27 +79,7 @@ void __early_init(void) {
   stm32_clock_init();
 }
 
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
 
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
 
 #if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
 /**

keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.h

@@ -0,0 +1,923 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file has been automatically generated using ChibiStudio board
+ * generator plugin. Do not edit manually.
+ */
+
+#ifndef BOARD_H
+#define BOARD_H
+
+/*
+ * Setup for ST STM32F072B-Discovery board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_ST_STM32F072B_DISCOVERY
+#define BOARD_NAME                  "ST STM32F072B-Discovery"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: LSE not fitted.
+ * NOTE: HSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK                0U
+#endif
+
+#define STM32_LSEDRV                (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK                0U
+#endif
+
+#define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F072xB
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON                0U
+#define GPIOA_PIN1                  1U
+#define GPIOA_PIN2                  2U
+#define GPIOA_PIN3                  3U
+#define GPIOA_PIN4                  4U
+#define GPIOA_PIN5                  5U
+#define GPIOA_PIN6                  6U
+#define GPIOA_PIN7                  7U
+#define GPIOA_PIN8                  8U
+#define GPIOA_PIN9                  9U
+#define GPIOA_PIN10                 10U
+#define GPIOA_USB_DM                11U
+#define GPIOA_USB_DP                12U
+#define GPIOA_SWDIO                 13U
+#define GPIOA_SWCLK                 14U
+#define GPIOA_PIN15                 15U
+
+#define GPIOB_PIN0                  0U
+#define GPIOB_PIN1                  1U
+#define GPIOB_PIN2                  2U
+#define GPIOB_PIN3                  3U
+#define GPIOB_PIN4                  4U
+#define GPIOB_PIN5                  5U
+#define GPIOB_PIN6                  6U
+#define GPIOB_PIN7                  7U
+#define GPIOB_PIN8                  8U
+#define GPIOB_PIN9                  9U
+#define GPIOB_PIN10                 10U
+#define GPIOB_PIN11                 11U
+#define GPIOB_PIN12                 12U
+#define GPIOB_SPI2_SCK              13U
+#define GPIOB_SPI2_MISO             14U
+#define GPIOB_SPI2_MOSI             15U
+
+#define GPIOC_MEMS_CS               0U
+#define GPIOC_PIN1                  1U
+#define GPIOC_PIN2                  2U
+#define GPIOC_PIN3                  3U
+#define GPIOC_PIN4                  4U
+#define GPIOC_PIN5                  5U
+#define GPIOC_LED_RED               6U
+#define GPIOC_LED_BLUE              7U
+#define GPIOC_LED_ORANGE            8U
+#define GPIOC_LED_GREEN             9U
+#define GPIOC_PIN10                 10U
+#define GPIOC_PIN11                 11U
+#define GPIOC_PIN12                 12U
+#define GPIOC_PIN13                 13U
+#define GPIOC_OSC32_IN              14U
+#define GPIOC_OSC32_OUT             15U
+
+#define GPIOD_PIN0                  0U
+#define GPIOD_PIN1                  1U
+#define GPIOD_PIN2                  2U
+#define GPIOD_PIN3                  3U
+#define GPIOD_PIN4                  4U
+#define GPIOD_PIN5                  5U
+#define GPIOD_PIN6                  6U
+#define GPIOD_PIN7                  7U
+#define GPIOD_PIN8                  8U
+#define GPIOD_PIN9                  9U
+#define GPIOD_PIN10                 10U
+#define GPIOD_PIN11                 11U
+#define GPIOD_PIN12                 12U
+#define GPIOD_PIN13                 13U
+#define GPIOD_PIN14                 14U
+#define GPIOD_PIN15                 15U
+
+#define GPIOE_PIN0                  0U
+#define GPIOE_PIN1                  1U
+#define GPIOE_PIN2                  2U
+#define GPIOE_PIN3                  3U
+#define GPIOE_PIN4                  4U
+#define GPIOE_PIN5                  5U
+#define GPIOE_PIN6                  6U
+#define GPIOE_PIN7                  7U
+#define GPIOE_PIN8                  8U
+#define GPIOE_PIN9                  9U
+#define GPIOE_PIN10                 10U
+#define GPIOE_PIN11                 11U
+#define GPIOE_PIN12                 12U
+#define GPIOE_PIN13                 13U
+#define GPIOE_PIN14                 14U
+#define GPIOE_PIN15                 15U
+
+#define GPIOF_OSC_IN                0U
+#define GPIOF_OSC_OUT               1U
+#define GPIOF_PIN2                  2U
+#define GPIOF_PIN3                  3U
+#define GPIOF_PIN4                  4U
+#define GPIOF_PIN5                  5U
+#define GPIOF_PIN6                  6U
+#define GPIOF_PIN7                  7U
+#define GPIOF_PIN8                  8U
+#define GPIOF_PIN9                  9U
+#define GPIOF_PIN10                 10U
+#define GPIOF_PIN11                 11U
+#define GPIOF_PIN12                 12U
+#define GPIOF_PIN13                 13U
+#define GPIOF_PIN14                 14U
+#define GPIOF_PIN15                 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_BUTTON                 PAL_LINE(GPIOA, 0U)
+#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
+
+#define LINE_SPI2_SCK               PAL_LINE(GPIOB, 13U)
+#define LINE_SPI2_MISO              PAL_LINE(GPIOB, 14U)
+#define LINE_SPI2_MOSI              PAL_LINE(GPIOB, 15U)
+
+#define LINE_MEMS_CS                PAL_LINE(GPIOC, 0U)
+#define LINE_LED_RED                PAL_LINE(GPIOC, 6U)
+#define LINE_LED_BLUE               PAL_LINE(GPIOC, 7U)
+#define LINE_LED_ORANGE             PAL_LINE(GPIOC, 8U)
+#define LINE_LED_GREEN              PAL_LINE(GPIOC, 9U)
+#define LINE_OSC32_IN               PAL_LINE(GPIOC, 14U)
+#define LINE_OSC32_OUT              PAL_LINE(GPIOC, 15U)
+
+
+
+#define LINE_OSC_IN                 PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT                PAL_LINE(GPIOF, 1U)
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n)              (0U << (n))
+#define PIN_ODR_HIGH(n)             (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
+#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0  - BUTTON                    (input floating).
+ * PA1  - PIN1                      (input pullup).
+ * PA2  - PIN2                      (input pullup).
+ * PA3  - PIN3                      (input pullup).
+ * PA4  - PIN4                      (input pullup).
+ * PA5  - PIN5                      (input pullup).
+ * PA6  - PIN6                      (input pullup).
+ * PA7  - PIN7                      (input pullup).
+ * PA8  - PIN8                      (input pullup).
+ * PA9  - PIN9                      (input pullup).
+ * PA10 - PIN10                     (input pullup).
+ * PA11 - USB_DM                    (input floating).
+ * PA12 - USB_DP                    (input floating).
+ * PA13 - SWDIO                     (alternate 0).
+ * PA14 - SWCLK                     (alternate 0).
+ * PA15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_BUTTON) |         \
+                                     PIN_MODE_INPUT(GPIOA_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOA_USB_DM) |         \
+                                     PIN_MODE_INPUT(GPIOA_USB_DP) |         \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
+                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
+                                     PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DM) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
+                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
+                                     PIN_OSPEED_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_BUTTON) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
+                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
+                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
+                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
+                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_BUTTON) |           \
+                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
+                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
+                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
+                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
+                                     PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_BUTTON, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN7, 0U))
+#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOA_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_USB_DM, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_USB_DP, 0U) |        \
+                                     PIN_AFIO_AF(GPIOA_SWDIO, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_SWCLK, 0U) |         \
+                                     PIN_AFIO_AF(GPIOA_PIN15, 0U))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0  - PIN0                      (input pullup).
+ * PB1  - PIN1                      (input pullup).
+ * PB2  - PIN2                      (input pullup).
+ * PB3  - PIN3                      (input pullup).
+ * PB4  - PIN4                      (input pullup).
+ * PB5  - PIN5                      (input pullup).
+ * PB6  - PIN6                      (input pullup).
+ * PB7  - PIN7                      (input pullup).
+ * PB8  - PIN8                      (input pullup).
+ * PB9  - PIN9                      (input pullup).
+ * PB10 - PIN10                     (input pullup).
+ * PB11 - PIN11                     (input pullup).
+ * PB12 - PIN12                     (input pullup).
+ * PB13 - SPI2_SCK                  (alternate 0).
+ * PB14 - SPI2_MISO                 (alternate 0).
+ * PB15 - SPI2_MOSI                 (alternate 0).
+ */
+#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) |   \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) |  \
+                                     PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN2) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |          \
+                                     PIN_OSPEED_HIGH(GPIOB_PIN4) |          \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) |   \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) |  \
+                                     PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) |   \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) |  \
+                                     PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_SCK) |         \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MISO) |        \
+                                     PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
+#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN7, 0U))
+#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOB_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) |      \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) |     \
+                                     PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0  - MEMS_CS                   (output pushpull maximum).
+ * PC1  - PIN1                      (input pullup).
+ * PC2  - PIN2                      (input pullup).
+ * PC3  - PIN3                      (input pullup).
+ * PC4  - PIN4                      (input pullup).
+ * PC5  - PIN5                      (input pullup).
+ * PC6  - LED_RED                   (output pushpull maximum).
+ * PC7  - LED_BLUE                  (output pushpull maximum).
+ * PC8  - LED_ORANGE                (output pushpull maximum).
+ * PC9  - LED_GREEN                 (output pushpull maximum).
+ * PC10 - PIN10                     (input pullup).
+ * PC11 - PIN11                     (input pullup).
+ * PC12 - PIN12                     (input pullup).
+ * PC13 - PIN13                     (input pullup).
+ * PC14 - OSC32_IN                  (input floating).
+ * PC15 - OSC32_OUT                 (input floating).
+ */
+#define VAL_GPIOC_MODER             (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) |       \
+                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_RED) |       \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_BLUE) |      \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) |    \
+                                     PIN_MODE_OUTPUT(GPIOC_LED_GREEN) |     \
+                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_IN) |       \
+                                     PIN_MODE_INPUT(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) |  \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) |   \
+                                     PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_RED) |       \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_BLUE) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) |    \
+                                     PIN_OSPEED_HIGH(GPIOC_LED_GREEN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_IN) |      \
+                                     PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_PUPDR             (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) |    \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_RED) |    \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
+                                     PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) |  \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) |   \
+                                     PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_MEMS_CS) |          \
+                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
+                                     PIN_ODR_LOW(GPIOC_LED_RED) |           \
+                                     PIN_ODR_LOW(GPIOC_LED_BLUE) |          \
+                                     PIN_ODR_LOW(GPIOC_LED_ORANGE) |        \
+                                     PIN_ODR_LOW(GPIOC_LED_GREEN) |         \
+                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_IN) |         \
+                                     PIN_ODR_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOC_LED_RED, 0U) |       \
+                                     PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
+#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) |    \
+                                     PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) |     \
+                                     PIN_AFIO_AF(GPIOC_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) |      \
+                                     PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0  - PIN0                      (input pullup).
+ * PD1  - PIN1                      (input pullup).
+ * PD2  - PIN2                      (input pullup).
+ * PD3  - PIN3                      (input pullup).
+ * PD4  - PIN4                      (input pullup).
+ * PD5  - PIN5                      (input pullup).
+ * PD6  - PIN6                      (input pullup).
+ * PD7  - PIN7                      (input pullup).
+ * PD8  - PIN8                      (input pullup).
+ * PD9  - PIN9                      (input pullup).
+ * PD10 - PIN10                     (input pullup).
+ * PD11 - PIN11                     (input pullup).
+ * PD12 - PIN12                     (input pullup).
+ * PD13 - PIN13                     (input pullup).
+ * PD14 - PIN14                     (input pullup).
+ * PD15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN7, 0U))
+#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOD_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOD_PIN15, 0U))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0  - PIN0                      (input pullup).
+ * PE1  - PIN1                      (input pullup).
+ * PE2  - PIN2                      (input pullup).
+ * PE3  - PIN3                      (input pullup).
+ * PE4  - PIN4                      (input pullup).
+ * PE5  - PIN5                      (input pullup).
+ * PE6  - PIN6                      (input pullup).
+ * PE7  - PIN7                      (input pullup).
+ * PE8  - PIN8                      (input pullup).
+ * PE9  - PIN9                      (input pullup).
+ * PE10 - PIN10                     (input pullup).
+ * PE11 - PIN11                     (input pullup).
+ * PE12 - PIN12                     (input pullup).
+ * PE13 - PIN13                     (input pullup).
+ * PE14 - PIN14                     (input pullup).
+ * PE15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN1) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOE_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOE_PIN15))
+#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN1) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOE_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN1, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN7, 0U))
+#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOE_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOE_PIN15, 0U))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0  - OSC_IN                    (input floating).
+ * PF1  - OSC_OUT                   (input floating).
+ * PF2  - PIN2                      (input pullup).
+ * PF3  - PIN3                      (input pullup).
+ * PF4  - PIN4                      (input pullup).
+ * PF5  - PIN5                      (input pullup).
+ * PF6  - PIN6                      (input pullup).
+ * PF7  - PIN7                      (input pullup).
+ * PF8  - PIN8                      (input pullup).
+ * PF9  - PIN9                      (input pullup).
+ * PF10 - PIN10                     (input pullup).
+ * PF11 - PIN11                     (input pullup).
+ * PF12 - PIN12                     (input pullup).
+ * PF13 - PIN13                     (input pullup).
+ * PF14 - PIN14                     (input pullup).
+ * PF15 - PIN15                     (input pullup).
+ */
+#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_OSC_IN) |         \
+                                     PIN_MODE_INPUT(GPIOF_OSC_OUT) |        \
+                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
+                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
+                                     PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) |     \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) |    \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
+                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) |     \
+                                     PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) |    \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
+                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) |     \
+                                     PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) |    \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
+                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_OSC_IN) |           \
+                                     PIN_ODR_HIGH(GPIOF_OSC_OUT) |          \
+                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
+                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
+                                     PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) |        \
+                                     PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) |       \
+                                     PIN_AFIO_AF(GPIOF_PIN2, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN3, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN4, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN5, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN6, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN7, 0U))
+#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN9, 0U) |          \
+                                     PIN_AFIO_AF(GPIOF_PIN10, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN11, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN12, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN13, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN14, 0U) |         \
+                                     PIN_AFIO_AF(GPIOF_PIN15, 0U))
+
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* BOARD_H */

keyboards/chibios_test/boards/ST_STM32F072B_DISCOVERY/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

keyboards/chocopad/keymaps/default/rules.mk

@@ -1,5 +1,2 @@
 RGBLIGHT_ENABLE = yes
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/chocopad/keymaps/khord/rules.mk

@@ -1,5 +1,2 @@
 RGBLIGHT_ENABLE = yes
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/christmas_tree/keymaps/default/rules.mk

@@ -1,3 +0,0 @@
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/clueboard/60/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-#include "60.h"
+#include QMK_KEYBOARD_H
 
 #define _______ KC_TRNS
 
@@ -32,7 +32,7 @@ enum custom_keycodes {
   float song_zelda_puzzle[][2]  = SONG(ZELDA_PUZZLE);
 #endif
 
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Layer 0: Default Layer
      * ,-----------------------------------------------------------.
      * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  `|BSp|

keyboards/clueboard/60/keymaps/default_aek/keymap.c

@@ -1,4 +1,4 @@
-#include "60.h"
+#include QMK_KEYBOARD_H
 
 #define _______ KC_TRNS
 
@@ -8,7 +8,7 @@ enum keyboard_layers {
   _CL
 };
 
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Layer 0: Default Layer
      * ,-----------------------------------------------------------.
      * |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|   BkSp|

keyboards/clueboard/60/keymaps/yanfali/keymap.c

@@ -1,4 +1,4 @@
-#include "60.h"
+#include QMK_KEYBOARD_H
 
 #define _______ KC_TRNS
 
@@ -33,7 +33,7 @@ enum custom_keycodes {
   float song_zelda_puzzle[][2]  = SONG(ZELDA_PUZZLE);
 #endif
 
-const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* Layer 0: Default Layer
      * ,-----------------------------------------------------------------.
      * |Esc      |  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  `|BSp|

keyboards/clueboard/66/keymaps/xyverz/rules.mk

@@ -44,6 +44,3 @@
 #
 RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/clueboard/card/keymaps/default/rules.mk

@@ -16,6 +16,3 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/clueboard/card/keymaps/rgb_effects/rules.mk

@@ -16,6 +16,3 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/comet46/comet46.c

@@ -4,19 +4,11 @@ void uart_init(void) {
 	SERIAL_UART_INIT();
 }
 
-void led_init(void) {
-	DDRD  |= (1<<1);
-	PORTD |= (1<<1);
-	DDRF  |= (1<<4) | (1<<5);
-	PORTF |= (1<<4) | (1<<5);
-}
-
 void matrix_init_kb(void) {
 	// put your keyboard start-up code here
 	// runs once when the firmware starts up
 	matrix_init_user();
 	uart_init();
-	led_init();
 }
 
 void matrix_scan_kb(void) {

keyboards/comet46/comet46.h

@@ -6,46 +6,6 @@
 #include "backlight.h"
 #include <stddef.h>
 
-#define red_led_off   PORTF |= (1<<5)
-#define red_led_on    PORTF &= ~(1<<5)
-#define blu_led_off   PORTF |= (1<<4)
-#define blu_led_on    PORTF &= ~(1<<4)
-#define grn_led_off   PORTD |= (1<<1)
-#define grn_led_on    PORTD &= ~(1<<1)
-
-#define set_led_off     red_led_off; grn_led_off; blu_led_off
-#define set_led_red     red_led_on;  grn_led_off; blu_led_off
-#define set_led_blue    red_led_off; grn_led_off; blu_led_on
-#define set_led_green   red_led_off; grn_led_on;  blu_led_off
-#define set_led_yellow  red_led_on;  grn_led_on;  blu_led_off
-#define set_led_magenta red_led_on;  grn_led_off; blu_led_on
-#define set_led_cyan    red_led_off; grn_led_on;  blu_led_on
-#define set_led_white   red_led_on;  grn_led_on;  blu_led_on
-
-/*
-#define LED_B 5
-#define LED_R 6
-#define LED_G 7
-
-#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
-
-#define red_led_on   PORTF |= (1<<LED_R)
-#define red_led_off  PORTF &= ~(1<<LED_R)
-#define grn_led_on   PORTF |= (1<<LED_G)
-#define grn_led_off  PORTF &= ~(1<<LED_G)
-#define blu_led_on   PORTF |= (1<<LED_B)
-#define blu_led_off  PORTF &= ~(1<<LED_B)
-
-#define set_led_off     PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G)
-#define set_led_red     PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R)
-#define set_led_blue    PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B)
-#define set_led_green   PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G)
-#define set_led_yellow  PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G)
-#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B)
-#define set_led_cyan    PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G)
-#define set_led_white   PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G)
-*/
-
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array

keyboards/comet46/config.h

@@ -41,12 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define ONESHOT_TIMEOUT 500
 
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -65,6 +59,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
+// Define masks for modifiers
+#define MODS_SHIFT_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTRL))
+#define MODS_ALT_MASK  (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+#define MODS_GUI_MASK  (MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI))
+
 //UART settings for communication with the RF microcontroller
 #define SERIAL_UART_BAUD 1000000
 #define SERIAL_UART_DATA UDR1

keyboards/comet46/i2c.c

@@ -0,0 +1,162 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif

keyboards/comet46/i2c.h

@@ -0,0 +1,49 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency 400kHz
+#define SCL_CLOCK  400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif

keyboards/comet46/keymaps/default-rgbled/keymap.c

@@ -0,0 +1,226 @@
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum comet46_layers
+{
+  _QWERTY,
+  _COLEMAK,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _ADJUST,
+};
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * | Tab  |   Q  |   W  |   E  |   R  |   T  |                    |   Y  |   U  |   I  |   O  |   P  | Bksp |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Ctl  |   A  |   S  |   D  |   F  |   G  | Esc  |      | Del  |   H  |   J  |   K  |   L  |   ;  |   "  |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |   {  |      |   }  |   N  |   M  |   ,  |   .  |   /  | Shift|
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             | GUI  | Lower| Space|      | Enter| Raise| Alt  |
+   *                             +--------------------/      \--------------------+
+   */
+  [_QWERTY] = LAYOUT(
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                             KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+    KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_ESC,         KC_DEL,  KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LCBR,        KC_RCBR, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                                        KC_LGUI, LOWER,   KC_SPC,         KC_ENT,  RAISE,   KC_LALT
+  ),
+
+  /* Colemak
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * | Tab  |   Q  |   W  |   F  |   P  |   G  |                    |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Ctl  |   A  |   R  |   S  |   T  |   D  | Esc  |      | Del  |   H  |   N  |   E  |   I  |   O  |   "  |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |   {  |      |   }  |   K  |   M  |   ,  |   .  |   /  | Shift|
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             | GUI  | Lower| Space|      | Enter| Raise| Alt  |
+   *                             +--------------------/      \--------------------+
+   */
+  [_COLEMAK] = LAYOUT(
+    KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,                             KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+    KC_LCTL, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_ESC,         KC_DEL,  KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LCBR,        KC_RCBR, KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                                        KC_LGUI, LOWER,   KC_SPC,         KC_ENT,  RAISE,   KC_LALT
+  ),
+
+  /* Dvorak
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * | Tab  |   "  |   ,  |   .  |   P  |   Y  |                    |   F  |   G  |   C  |   R  |   L  | Bksp |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Ctl  |   A  |   O  |   E  |   U  |   I  | Esc  |      | Del  |   D  |   H  |   T  |   N  |   S  |  /   |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Shift|   ;  |   Q  |   J  |   K  |   X  |   {  |      |   }  |   B  |   M  |   W  |   V  |   Z  | Shift|
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             | GUI  | Lower| Space|      | Enter| Raise| Alt  |
+   *                             +--------------------/      \--------------------+
+   */
+  [_DVORAK] = LAYOUT(
+    KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,                             KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+    KC_LCTL, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_ESC,         KC_DEL,  KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_LCBR,        KC_RCBR, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
+                                        KC_LGUI, LOWER,   KC_SPC,         KC_ENT,  RAISE,   KC_LALT
+  ),
+
+  /* Lower
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * |      |   !  |   @  |   #  |   $  |   %  |                    |   ^  |   &  |   *  |   (  |   )  |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |   `  |   \  |   -  |   =  |   [  |   ]  |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |      |      |   ~  |   |  |   _  |   +  |   {  |   }  |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             |      |      |      |      |      |      |      |
+   *                             +--------------------/      \--------------------+
+   */
+  [_LOWER] = LAYOUT(
+    _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                          KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+    _______, _______, _______, _______, _______, _______, _______,        KC_GRV,  KC_BSLS, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______,
+    _______, _______, _______, _______, _______, _______, _______,        KC_TILD, KC_PIPE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______,
+                                        _______, _______, _______,        _______, _______, _______
+  ),
+
+  /* Raise
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * |      |   1  |   2  |   3  |   4  |   5  |                    |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |      |      | Left | Down |  Up  |Right | End  |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Home |      | PgDn | PgUp |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             |      |      |      |      |      |      |      |
+   *                             +--------------------/      \--------------------+
+   */
+  [_RAISE] = LAYOUT(
+    _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,          XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_END,  _______,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,         KC_HOME, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______,
+                                        _______, _______, _______,        _______, _______, _______
+  ),
+
+  /* Adjust
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |Qwerty|      |Colemk|      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |Reset |      |Dvorak|      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             |      |      |      |      |      |      |      |
+   *                             +--------------------/      \--------------------+
+   */
+  [_ADJUST] = LAYOUT(
+    _______, _______, _______, _______, _______, _______,                          _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, QWERTY,         COLEMAK, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, RESET,          DVORAK,  _______, _______, _______, _______, _______, _______,
+                                        _______, _______, _______,        _______, _______, _______
+  )
+};
+
+
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
+}
+
+// settings for LED on receiver
+void led_init(void) {
+	DDRD  |= (1<<1);
+	PORTD |= (1<<1);
+	DDRF  |= (1<<4) | (1<<5);
+	PORTF |= (1<<4) | (1<<5);
+}
+
+#define red_led_off   PORTF |= (1<<5)
+#define red_led_on    PORTF &= ~(1<<5)
+#define blu_led_off   PORTF |= (1<<4)
+#define blu_led_on    PORTF &= ~(1<<4)
+#define grn_led_off   PORTD |= (1<<1)
+#define grn_led_on    PORTD &= ~(1<<1)
+
+#define set_led_off     red_led_off; grn_led_off; blu_led_off
+#define set_led_red     red_led_on;  grn_led_off; blu_led_off
+#define set_led_blue    red_led_off; grn_led_off; blu_led_on
+#define set_led_green   red_led_off; grn_led_on;  blu_led_off
+#define set_led_yellow  red_led_on;  grn_led_on;  blu_led_off
+#define set_led_magenta red_led_on;  grn_led_off; blu_led_on
+#define set_led_cyan    red_led_off; grn_led_on;  blu_led_on
+#define set_led_white   red_led_on;  grn_led_on;  blu_led_on
+
+void matrix_init_user(void) {
+  led_init();
+}
+
+void matrix_scan_user(void) {
+  uint8_t layer = biton32(layer_state);
+  uint8_t default_layer = biton32(eeconfig_read_default_layer());
+  switch (layer) {
+    case _LOWER:
+      set_led_red;
+      break;
+    case _RAISE:
+      set_led_blue;
+      break;
+    case _ADJUST:
+      set_led_magenta;
+      break;
+    default:
+      switch (default_layer) {
+        case _COLEMAK:
+          set_led_white;
+          break;
+        case _DVORAK:
+          set_led_yellow;
+          break;
+        default:
+          set_led_green;
+          break;
+      }
+      break;
+  }
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      break;
+  }
+  return true;
+}

keyboards/comet46/keymaps/default-rgbled/readme.md

@@ -0,0 +1,3 @@
+## default-led
+
+A keymap that is compatible with mitosis-type receivers, which use RGB LED for layer indication.

keyboards/comet46/keymaps/default/config.h

@@ -18,8 +18,14 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#pragma once
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
 
+// #include "../../config.h"
 
-// place overrides here
+/* Use I2C or Serial */
 
+#define USE_I2C
+#define SSD1306OLED
+
+#endif

keyboards/comet46/keymaps/default/keymap.c

@@ -2,6 +2,10 @@
 // This is the canonical layout file for the Quantum project. If you want to add another keyboard,
 
 #include QMK_KEYBOARD_H
+#ifdef SSD1306OLED
+  #include "ssd1306.h"
+#endif
+
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -9,13 +13,18 @@
 // entirely and just use numbers.
 enum comet46_layers
 {
-    _QWERTY,
+  _QWERTY,
-    _LOWER,
+  _COLEMAK,
-    _RAISE,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _ADJUST,
 };
 
 enum custom_keycodes {
   QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
   LOWER,
   RAISE,
 };
@@ -46,6 +55,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                         KC_LGUI, LOWER,   KC_SPC,         KC_ENT,  RAISE,   KC_LALT
   ),
 
+  /* Colemak
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * | Tab  |   Q  |   W  |   F  |   P  |   G  |                    |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Ctl  |   A  |   R  |   S  |   T  |   D  | Esc  |      | Del  |   H  |   N  |   E  |   I  |   O  |   "  |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Shift|   Z  |   X  |   C  |   V  |   B  |   {  |      |   }  |   K  |   M  |   ,  |   .  |   /  | Shift|
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             | GUI  | Lower| Space|      | Enter| Raise| Alt  |
+   *                             +--------------------/      \--------------------+
+   */
+  [_COLEMAK] = LAYOUT(
+    KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,                             KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+    KC_LCTL, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_ESC,         KC_DEL,  KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_LCBR,        KC_RCBR, KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                                        KC_LGUI, LOWER,   KC_SPC,         KC_ENT,  RAISE,   KC_LALT
+  ),
+
+  /* Dvorak
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * | Tab  |   "  |   ,  |   .  |   P  |   Y  |                    |   F  |   G  |   C  |   R  |   L  | Bksp |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Ctl  |   A  |   O  |   E  |   U  |   I  | Esc  |      | Del  |   D  |   H  |   T  |   N  |   S  |  /   |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * | Shift|   ;  |   Q  |   J  |   K  |   X  |   {  |      |   }  |   B  |   M  |   W  |   V  |   Z  | Shift|
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             | GUI  | Lower| Space|      | Enter| Raise| Alt  |
+   *                             +--------------------/      \--------------------+
+   */
+  [_DVORAK] = LAYOUT(
+    KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,                             KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
+    KC_LCTL, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_ESC,         KC_DEL,  KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
+    KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_LCBR,        KC_RCBR, KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
+                                        KC_LGUI, LOWER,   KC_SPC,         KC_ENT,  RAISE,   KC_LALT
+  ),
+
   /* Lower
    * ,-----------------------------------------+                    +-----------------------------------------.
    * |      |   !  |   @  |   #  |   $  |   %  |                    |   ^  |   &  |   *  |   (  |   )  |      |
@@ -70,7 +115,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
    * |      |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |      |      | Left | Down |  Up  |Right | End  |      |
    * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
-   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Home |      |      |      |      |      |      |
+   * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      | Home |      | PgDn | PgUp |      |      |      |
    * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
    *                             |      |      |      |      |      |      |      |
    *                             +--------------------/      \--------------------+
@@ -78,26 +123,134 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_RAISE] = LAYOUT(
     _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                             KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
     _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,          XXXXXXX, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_END,  _______,
-    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,         KC_HOME, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,         KC_HOME, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______,
+                                        _______, _______, _______,        _______, _______, _______
+  ),
+
+  /* Adjust
+   * ,-----------------------------------------+                    +-----------------------------------------.
+   * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |Qwerty|      |Colemk|      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      |Reset |      |Dvorak|      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+      +------+------+------+------+------+-------------|
+   *                             |      |      |      |      |      |      |      |
+   *                             +--------------------/      \--------------------+
+   */
+  [_ADJUST] = LAYOUT(
+    _______, _______, _______, _______, _______, _______,                          _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, QWERTY,         COLEMAK, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, RESET,          DVORAK,  _______, _______, _______, _______, _______, _______,
                                         _______, _______, _______,        _______, _______, _______
   )
 };
 
 
+uint32_t layer_state_set_user(uint32_t state) {
+  return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// You need to add source files to SRC in rules.mk when using OLED display functions
+void set_keylog(uint16_t keycode);
+const char *read_keylog(void);
+const char *read_modifier_state(void);
+const char *read_host_led_state(void);
+
+void matrix_init_user(void) {
+  iota_gfx_init(false);   // turns on the display
+}
+
 void matrix_scan_user(void) {
-    uint8_t layer = biton32(layer_state);
+  iota_gfx_task();  // this is what updates the display continuously
-    switch (layer) {
+}
-    	case _QWERTY:
+
-    	    set_led_green;
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
-    	    break;
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-        case _RAISE:
+    memcpy(dest->display, source->display, sizeof(dest->display));
-            set_led_blue;
+    dest->dirty = true;
-            break;
+  }
-        case _LOWER:
+}
-            set_led_red;
+
-            break;
+void render_status(struct CharacterMatrix *matrix) {
+  // Layer state
+  char layer_str[22];
+  matrix_write(matrix, "Layer: ");
+  uint8_t layer = biton32(layer_state);
+  uint8_t default_layer = biton32(eeconfig_read_default_layer());
+  switch (layer) {
+    case _QWERTY:
+      switch (default_layer) {
+        case _QWERTY:
+          snprintf(layer_str, sizeof(layer_str), "Qwerty");
+          break;
+        case _COLEMAK:
+          snprintf(layer_str, sizeof(layer_str), "Colemak");
+          break;
+        case _DVORAK:
+          snprintf(layer_str, sizeof(layer_str), "Dvorak");
+          break;
         default:
-            set_led_green;
+          snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer);
-            break;
+          break;
+      }
+      break;
+    case _RAISE:
+      snprintf(layer_str, sizeof(layer_str), "Raise");
+      break;
+    case _LOWER:
+      snprintf(layer_str, sizeof(layer_str), "Lower");
+      break;
+    case _ADJUST:
+      snprintf(layer_str, sizeof(layer_str), "Adjust");
+      break;
+    default:
+      snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer);
+  }
+  matrix_write_ln(matrix, layer_str);
+  // Last entered keycode
+  matrix_write_ln(matrix, read_keylog());
+  // Modifier state
+  matrix_write_ln(matrix, read_modifier_state());
+  // Host Keyboard LED Status
+  matrix_write(matrix, read_host_led_state());
+}
+
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+  matrix_clear(&matrix);
+  render_status(&matrix);
+  matrix_update(&display, &matrix);
+}
+
+#endif//SSD1306OLED
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  #ifdef SSD1306OLED
+    if (record->event.pressed) {
+      set_keylog(keycode);
     }
+  #endif
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_DVORAK);
+      }
+      break;
+  }
+  return true;
 }

keyboards/comet46/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+## default-oled-display
+
+A keymap that is compatible with receivers with an OLED display.

keyboards/comet46/keymaps/default/rules.mk

@@ -0,0 +1,5 @@
+# If you want to change display settings of the OLED, you need to change the following lines
+SRC +=  ./lib/glcdfont.c \
+		./lib/keylogger.c \
+        ./lib/modifier_state_reader.c \
+        ./lib/host_led_state_reader.c

keyboards/comet46/keymaps/satt/action_pseudo_lut.c

@@ -10,133 +10,133 @@ static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE];
  * Memo: Using other layer keymap to get keycode
  */
 void action_pseudo_lut(keyrecord_t *record, uint8_t base_keymap_id, const uint16_t (*keymap)[2]) {
-    uint8_t prev_shift;
+  uint8_t prev_shift;
-    uint16_t keycode;
+  uint16_t keycode;
-    uint16_t pseudo_keycode;
+  uint16_t pseudo_keycode;
 
-    /* get keycode from keymap you specified */
+  /* get keycode from keymap you specified */
-    keycode = keymap_key_to_keycode(base_keymap_id, record->event.key);
+  keycode = keymap_key_to_keycode(base_keymap_id, record->event.key);
 
-    prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT));
+  prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT));
 
-    if (record->event.pressed) {
+  if (record->event.pressed) {
-        /* when magic commands entered, keycode does not converted */
+    /* when magic commands entered, keycode does not converted */
-        if (IS_COMMAND()) {
+    if (IS_COMMAND()) {
-            if (prev_shift) {
+      if (prev_shift) {
-                add_shift_bit(keycode);
+        add_shift_bit(keycode);
-            }
+      }
-            register_code(keycode);
+      register_code(keycode);
-            return;
+      return;
-        }
-
-        if (prev_shift) {
-            pseudo_keycode = convert_keycode(keymap, keycode, true);
-            dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
-            add_shift_bit(keycode);
-
-            if (IS_LSFT(pseudo_keycode)) {
-                register_code(QK_LSFT ^ pseudo_keycode);
-            } else {
-                /* delete shift mod temporarily */
-                del_mods(prev_shift);
-                send_keyboard_report();
-                register_code(pseudo_keycode);
-                add_mods(prev_shift);
-                send_keyboard_report();
-            }
-        } else {
-            pseudo_keycode = convert_keycode(keymap, keycode, false);
-            dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
-
-            if (IS_LSFT(pseudo_keycode)) {
-                add_weak_mods(MOD_BIT(KC_LSFT));
-                send_keyboard_report();
-                register_code(QK_LSFT ^ pseudo_keycode);
-                /* on Windows, prevent key repeat to avoid unintended output */
-                unregister_code(QK_LSFT ^ pseudo_keycode);
-                del_weak_mods(MOD_BIT(KC_LSFT));
-                send_keyboard_report();
-            } else {
-                register_code(pseudo_keycode);
-            }
-        }
-    } else {
-        if (get_shift_bit(keycode)) {
-            del_shift_bit(keycode);
-            pseudo_keycode = convert_keycode(keymap, keycode, true);
-        } else {
-            pseudo_keycode = convert_keycode(keymap, keycode, false);
-        }
-        dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode);
-
-        if (IS_LSFT(pseudo_keycode)) {
-            unregister_code(QK_LSFT ^ pseudo_keycode);
-        } else {
-            unregister_code(pseudo_keycode);
-        }
     }
+
+    if (prev_shift) {
+      pseudo_keycode = convert_keycode(keymap, keycode, true);
+      dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
+      add_shift_bit(keycode);
+
+      if (IS_LSFT(pseudo_keycode)) {
+        register_code(QK_LSFT ^ pseudo_keycode);
+      } else {
+        /* delete shift mod temporarily */
+        del_mods(prev_shift);
+        send_keyboard_report();
+        register_code(pseudo_keycode);
+        add_mods(prev_shift);
+        send_keyboard_report();
+      }
+    } else {
+      pseudo_keycode = convert_keycode(keymap, keycode, false);
+      dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
+
+      if (IS_LSFT(pseudo_keycode)) {
+        add_weak_mods(MOD_BIT(KC_LSFT));
+        send_keyboard_report();
+        register_code(QK_LSFT ^ pseudo_keycode);
+        /* on Windows, prevent key repeat to avoid unintended output */
+        unregister_code(QK_LSFT ^ pseudo_keycode);
+        del_weak_mods(MOD_BIT(KC_LSFT));
+        send_keyboard_report();
+      } else {
+        register_code(pseudo_keycode);
+      }
+    }
+  } else {
+    if (get_shift_bit(keycode)) {
+      del_shift_bit(keycode);
+      pseudo_keycode = convert_keycode(keymap, keycode, true);
+    } else {
+      pseudo_keycode = convert_keycode(keymap, keycode, false);
+    }
+    dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode);
+
+    if (IS_LSFT(pseudo_keycode)) {
+      unregister_code(QK_LSFT ^ pseudo_keycode);
+    } else {
+      unregister_code(pseudo_keycode);
+    }
+  }
 }
 
 uint16_t convert_keycode(const uint16_t (*keymap)[2], uint16_t keycode, bool shift_modded)
 {
-    uint16_t pseudo_keycode;
+  uint16_t pseudo_keycode;
 
-    switch (keycode) {
+  switch (keycode) {
-        case KC_A ... KC_CAPSLOCK:
+    case KC_A ... KC_CAPSLOCK:
-#if defined(__AVR__)
+      #if defined(__AVR__) 
-            if (shift_modded) {
+        if (shift_modded) {
-                pseudo_keycode = pgm_read_word(&keymap[keycode][1]);
+          pseudo_keycode = pgm_read_word(&keymap[keycode][1]);
-            } else {
+        } else {
-                pseudo_keycode = pgm_read_word(&keymap[keycode][0]);
+          pseudo_keycode = pgm_read_word(&keymap[keycode][0]);
-            }
+        }
-#else
+      #else
-            if (shift_modded) {
+        if (shift_modded) {
-                pseudo_keycode = keymap[keycode][1];
+          pseudo_keycode = keymap[keycode][1];
-            } else {
+        } else {
-                pseudo_keycode = keymap[keycode][0];
+          pseudo_keycode = keymap[keycode][0];
-            }
+        }
-#endif
+      #endif
-            /* if undefined, use got keycode as it is */
+      /* if undefined, use got keycode as it is */
-            if (pseudo_keycode == 0x00) {
+      if (pseudo_keycode == 0x00) {
-                if (shift_modded) {
+        if (shift_modded) {
-                    pseudo_keycode = S(keycode);
+          pseudo_keycode = S(keycode);
-                } else {
+        } else {
-                    pseudo_keycode = keycode;
+          pseudo_keycode = keycode;
-                }
+        }
-            }
+      }
-            break;
+      break;
-        default:
+    default:
-            if (shift_modded) {
+      if (shift_modded) {
-                pseudo_keycode = S(keycode);
+        pseudo_keycode = S(keycode);
-            } else {
+      } else {
-                pseudo_keycode = keycode;
+        pseudo_keycode = keycode;
-            }
+      }
-            break;
+      break;
-    }
+  }
-    return pseudo_keycode;
+  return pseudo_keycode;
 }
 
 uint8_t get_shift_bit(uint16_t keycode) {
-    if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+  if ((keycode >> 3) < SHIFT_BIT_SIZE) {
-        return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7));
+    return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7));
-    } else {
+  } else {
-        dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode);
+    dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode);
-        return 0;
+    return 0;
-    }
+  }
 }
 
 void add_shift_bit(uint16_t keycode) {
-    if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+  if ((keycode >> 3) < SHIFT_BIT_SIZE) {
-        send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7));
+    send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7));
-    } else {
+  } else {
-        dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode);
+    dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode);
-    }
+  }
 }
 
 void del_shift_bit(uint16_t keycode) {
-    if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+  if ((keycode >> 3) < SHIFT_BIT_SIZE) {
-        send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7));
+    send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7));
-    } else {
+  } else {
-        dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode);
+    dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode);
-    }
+  }
 }

keyboards/comet46/keymaps/satt/config.h

@@ -0,0 +1,34 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <[email protected]>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+  keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
+)
+
+/* Use I2C or Serial */
+
+#define USE_I2C
+#define SSD1306OLED
+
+#endif

keyboards/comet46/keymaps/satt/keymap.c

@@ -4,64 +4,96 @@
 #include QMK_KEYBOARD_H
 #include "keymap_jis2us.h"
 #include "action_pseudo_lut.h"
+#include "keymap_jp.h"
+#ifdef SSD1306OLED
+  #include "ssd1306.h"
+#endif
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
 // entirely and just use numbers.
 enum comet46_layers {
-    _QWERTY,
+  _QWERTY,
-    _LOWER,
+  _LOWER,
-    _RAISE,
+  _RAISE,
-    _PSEUDO_US,
+  _PSEUDO_US,
-    _PSEUDO_US_LOWER,
+  _PSEUDO_US_LOWER,
-    _PSEUDO_US_RAISE,
+  _PSEUDO_US_RAISE,
-    _ADJUST
+  _ADJUST
 };
 
 enum custom_keycodes {
   QWERTY = SAFE_RANGE,
   PSEUDO_US,
+  JIS2US,
 };
 
-#define KC_LWR MO(_LOWER)
+// JIS keycodes
-#define KC_RSE MO(_RAISE)
+#define KC_JZHT JP_ZHTG  // hankaku/zenkaku|kanzi
+#define KC_JCIR JP_CIRC  // ^, ~
+#define KC_JAT  JP_AT    // @, `
+#define KC_JLBR JP_LBRC  // [, {
+#define KC_JCOL JP_COLN  // :, *
+#define KC_JRBR JP_RBRC  // ], }
+#define KC_JBSL JP_BSLS  // \, _
+#define KC_JMHE JP_MHEN  // muhenkan
+#define KC_JHEN JP_HENK  // henkan
+#define KC_JKAN JP_KANA  // katakana/hiragana|ro-mazi
+#define KC_JMKA JP_MKANA //kana on MacOSX
+#define KC_JMEI JP_MEISU //eisu on MacOSX
+#define KC_JAMP JP_AMPR  // &
+#define KC_JQUO JP_QUOT  // '
+#define KC_JLPR JP_LPRN  // (
+#define KC_JRPR JP_RPRN  // )
+#define KC_JEQL JP_EQL   // =
+#define KC_JTIL JP_TILD  // ~
+#define KC_JPIP JP_PIPE  // |
+#define KC_JGRV JP_GRV   // `
+#define KC_JLCB JP_LCBR  // {
+#define KC_JPLU JP_PLUS  // +
+#define KC_JAST JP_ASTR  // *
+#define KC_JRCB JP_RCBR  // }
+#define KC_JUND JP_UNDS  // _
+
+// Layer related keycodes
+#define KC_LWR  MO(_LOWER)
+#define KC_RSE  MO(_RAISE)
 #define KC_P_LW MO(_PSEUDO_US_LOWER)
 #define KC_P_RS MO(_PSEUDO_US_RAISE)
 #define KC_QWRT QWERTY
 #define KC_P_US PSEUDO_US
+#define KC_J2US JIS2US
+
+// Special keycodes
 #define KC_SPCT CTL_T(KC_SPC)
 #define KC_ENSF SFT_T(KC_ENT)
-#define KC_SFTA SFT_T(KC_A)
+#define KC_CAEC MT(MOD_LCTL | MOD_LALT, KC_ESC)
-#define KC_CTSF S(KC_LCTL)
+#define KC_CSTB C_S_T(KC_TAB)
 #define KC_IMON ALT_T(KC_F13)
 #define KC_IMOF GUI_T(KC_F14)
-#define KC_SRO S(KC_RO)
-#define KC_SYEN S(KC_JYEN)
 #define KC_CAD LCA(KC_DEL)
 #define KC_RST RESET
 
-#define LONGPRESS_DELAY 150
-
 // Fillers to make layering more clear
-#define KC_ KC_TRNS 
+#define KC_ KC_TRNS
 #define KC_XXXX KC_NO
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [_QWERTY] = LAYOUT_kc(  
+  [_QWERTY] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
-     ESC , Q  , W  , E  , R  , T  ,                 Y  , U  , I  , O  , P  ,DEL ,
+     CAEC, Q  , W  , E  , R  , T  ,                 Y  , U  , I  , O  , P  ,DEL ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
-     TAB ,SFTA, S  , D  , F  , G  ,LPRN,      RPRN, H  , J  , K  , L  ,SCLN,BSPC,
+     CSTB, A  , S  , D  , F  , G  ,LPRN,      RPRN, H  , J  , K  , L  ,SCLN,BSPC,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-     CTSF, Z  , X  , C  , V  , B  ,LBRC,      RBRC, N  , M  ,COMM,DOT ,SLSH,QUOT,
+     LSFT, Z  , X  , C  , V  , B  ,LBRC,      RBRC, N  , M  ,COMM,DOT ,SLSH,QUOT,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
                          IMOF,LWR ,SPCT,      ENSF,RSE ,IMON
   //                    +----+----+---/       \---+----+----+
   ),
 
-  [_LOWER] = LAYOUT_kc(  
+  [_LOWER] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
          ,EXLM, AT ,HASH,DLR ,PERC,                CIRC,AMPR,ASTR,LPRN,RPRN,    ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
@@ -69,60 +101,60 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
          , F7 , F8 , F9 , F10, F11, F12,      TILD,PIPE,UNDS,PLUS,LCBR,RCBR,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-                             ,    ,    ,          ,    ,    
+                             ,    ,    ,          ,    ,
   //                    +----+----+---/       \---+----+----+
   ),
 
-  [_RAISE] = LAYOUT_kc(  
+  [_RAISE] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
          , 1  , 2  , 3  , 4  , 5  ,                 6  , 7  , 8  , 9  , 0  ,    ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
          ,    ,    ,    ,    ,    ,    ,      XXXX,LEFT,DOWN, UP ,RGHT,END ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,    ,      HOME,XXXX,XXXX,XXXX,XXXX,XXXX,    ,
+         ,    ,    ,    ,    ,    ,    ,      HOME,XXXX,PGDN,PGUP,XXXX,XXXX,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-                             ,    ,    ,          ,    ,    
+                             ,    ,    ,          ,    ,
   //                    +----+----+---/       \---+----+----+
   ),
 
-  [_PSEUDO_US] = LAYOUT_kc(  
+  [_PSEUDO_US] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
-     ESC , Q  , W  , E  , R  , T  ,                 Y  , U  , I  , O  , P  ,DEL ,
+     CAEC, Q  , W  , E  , R  , T  ,                 Y  , U  , I  , O  , P  ,DEL ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
-     TAB ,SFTA, S  , D  , F  , G  ,ASTR,      LPRN, H  , J  , K  , L  ,FN0 ,BSPC,
+     CSTB, A  , S  , D  , F  , G  ,JLPR,      JRPR, H  , J  , K  , L  ,J2US,BSPC,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-     CTSF, Z  , X  , C  , V  , B  ,FN0 ,      FN0 , N  , M  ,COMM,DOT ,SLSH,FN0 ,
+     LSFT, Z  , X  , C  , V  , B  ,J2US,      J2US, N  , M  ,COMM,DOT ,SLSH,J2US,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
                          IMOF,P_LW,SPCT,      ENSF,P_RS,IMON
   //                    +----+----+---/       \---+----+----+
   ),
 
 
-  [_PSEUDO_US_LOWER] = LAYOUT_kc(  
+  [_PSEUDO_US_LOWER] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
-         ,EXLM,LBRC,HASH,DLR ,PERC,                EQL ,CIRC, DQT,ASTR,LPRN,    ,
+         ,EXLM,JAT ,HASH,DLR ,PERC,                JCIR,JAMP,JAST,JLPR,JRPR,    ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
-         , F1 , F2 , F3 , F4 , F5 , F6 ,      LCBR,JYEN,MINS,UNDS,RBRC,BSLS,    ,
+         , F1 , F2 , F3 , F4 , F5 , F6 ,      JGRV,JBSL,MINS,JEQL,JLBR,JRBR,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-         , F7 , F8 , F9 , F10, F11, F12,      PLUS,SYEN,SRO ,COLN,RCBR,PIPE,    ,
+         , F7 , F8 , F9 , F10, F11, F12,      JTIL,JPIP,JUND,JPLU,JLCB,JRCB,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-                             ,    ,    ,          ,    ,    
+                             ,    ,    ,          ,    ,
   //                    +----+----+---/       \---+----+----+
   ),
 
-  [_PSEUDO_US_RAISE] = LAYOUT_kc(  
+  [_PSEUDO_US_RAISE] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
          , 1  , 2  , 3  , 4  , 5  ,                 6  , 7  , 8  , 9  , 0  ,    ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    , GRV,      XXXX,LEFT,DOWN, UP ,RGHT,END ,    ,
+         ,    ,    ,    ,    ,    ,JZHT,      XXXX,LEFT,DOWN, UP ,RGHT,END ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,    ,      HOME,XXXX,XXXX,XXXX,XXXX,XXXX,    ,
+         ,    ,    ,    ,    ,    ,    ,      HOME,XXXX,PGDN,PGUP,XXXX,XXXX,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-                             ,    ,    ,          ,    ,    
+                             ,    ,    ,          ,    ,
   //                    +----+----+---/       \---+----+----+
   ),
 
-  [_ADJUST] = LAYOUT_kc(  
+  [_ADJUST] = LAYOUT_kc(
   //,----+----+----+----+----+----+               +----+----+----+----+----+----.
          ,    ,    ,    ,    ,    ,                    ,    ,    ,    ,    ,    ,
   //|----+----+----+----+----+----+----+     +----+----+----+----+----+----+----|
@@ -130,69 +162,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
          ,    ,    ,    ,    ,    ,RST ,      P_US,    ,    ,    ,    ,    ,    ,
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
-                             ,    ,    ,          ,    ,    
+                             ,    ,    ,          ,    ,
   //                    +----+----+---/       \---+----+----+
   )
 
 };
 
-
-/*
- * user defined action function
- */
-enum function_id {
-    PSEUDO_US_FUNCTION,
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-    switch (id)
-    {
-    case PSEUDO_US_FUNCTION:
-        action_pseudo_lut(record, _QWERTY, keymap_jis2us);
-        break;
-    }
-}
-
-/*
- * Fn action definition
- */
-const uint16_t PROGMEM fn_actions[] = {
-    [0] = ACTION_FUNCTION(PSEUDO_US_FUNCTION),
-};
-
-void matrix_scan_user(void) {
-    uint8_t layer = biton32(layer_state);
-    switch (layer) {
-      case _LOWER:
-          set_led_red;
-          break;
-      case _RAISE:
-          set_led_blue;
-          break;
-      case _PSEUDO_US_LOWER:
-          set_led_yellow;
-          break;
-      case _PSEUDO_US_RAISE:
-          set_led_cyan;
-          break;
-      case _ADJUST:
-          set_led_magenta;
-          break;
-      default:
-          set_led_green;
-          break;
-    }
-};
-
 uint32_t layer_state_set_user(uint32_t state) {
   switch (biton32(state)) {
-    case _PSEUDO_US:
-      return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
-      break;
     case _PSEUDO_US_LOWER:
-      return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
+    case _PSEUDO_US_RAISE:
-      break;
-    case _PSEUDO_US_RAISE: 
       return update_tri_layer_state(state, _PSEUDO_US_RAISE, _PSEUDO_US_LOWER, _ADJUST);
       break;
     default:
@@ -201,19 +180,112 @@ uint32_t layer_state_set_user(uint32_t state) {
   }
 }
 
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// You need to add source files to SRC in rules.mk when using OLED display functions
+void set_keylog(uint16_t keycode);
+const char *read_keylog(void);
+const char *read_modifier_state(void);
+const char *read_host_led_state(void);
+
+void matrix_init_user(void) {
+  iota_gfx_init(false);   // turns on the display
+}
+
+void matrix_scan_user(void) {
+  iota_gfx_task();  // this is what updates the display continuously
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void render_status(struct CharacterMatrix *matrix) {
+  // Layer state
+  char layer_str[22];
+  matrix_write(matrix, "Layer: ");
+  uint8_t layer = biton32(layer_state);
+  uint8_t default_layer = biton32(eeconfig_read_default_layer());
+    switch (layer) {
+      case _QWERTY:
+        switch (default_layer) {
+          case _QWERTY:
+            snprintf(layer_str, sizeof(layer_str), "Qwerty");
+            break;
+          case _PSEUDO_US:
+            snprintf(layer_str, sizeof(layer_str), "Psuedo_US");
+            break;
+          default:
+            snprintf(layer_str, sizeof(layer_str), "Undef-%d", default_layer);
+            break;
+        }
+        break;
+      case _RAISE:
+        snprintf(layer_str, sizeof(layer_str), "Raise");
+        break;
+      case _LOWER:
+        snprintf(layer_str, sizeof(layer_str), "Lower");
+        break;
+      case _PSEUDO_US_RAISE:
+        snprintf(layer_str, sizeof(layer_str), "P_US_Raise");
+        break;
+      case _PSEUDO_US_LOWER:
+        snprintf(layer_str, sizeof(layer_str), "P_US_Lower");
+        break;
+      case _ADJUST:
+        snprintf(layer_str, sizeof(layer_str), "Adjust");
+        break;
+      default:
+        snprintf(layer_str, sizeof(layer_str), "Undef-%d", layer);
+    }
+  matrix_write_ln(matrix, layer_str);
+  // Last entered keycode
+  matrix_write_ln(matrix, read_keylog());
+  // Modifier state
+  matrix_write_ln(matrix, read_modifier_state());
+  // Host Keyboard LED Status
+  matrix_write(matrix, read_host_led_state());
+}
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  matrix_clear(&matrix);
+  render_status(&matrix);
+  matrix_update(&display, &matrix);
+}
+
+#endif//SSD1306OLED
+
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  #ifdef SSD1306OLED
+    if (record->event.pressed) {
+      set_keylog(keycode);
+    }
+  #endif
   switch (keycode) {
     case QWERTY:
       if (record->event.pressed) {
         set_single_persistent_default_layer(_QWERTY);
       }
-      return false;
       break;
     case PSEUDO_US:
       if (record->event.pressed) {
         set_single_persistent_default_layer(_PSEUDO_US);
       }
-      return false;
+      break;
+    case JIS2US:
+      action_pseudo_lut(record, _QWERTY, keymap_jis2us);
       break;
   }
   return true;

keyboards/comet46/keymaps/satt/keymap_jis2us.h

@@ -3,30 +3,30 @@
 
 /* keymap for convert from JIS to US */
 const uint16_t PROGMEM keymap_jis2us[][2] = {
-    [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */
+  [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */
 
-    [KC_1]    = { KC_1,    KC_EXLM    }, /* 1 and ! -> 1 and ! */
+  [KC_1]    = { KC_1,    KC_EXLM    }, /* 1 and ! -> 1 and ! */
-    [KC_2]    = { KC_2,    KC_LBRC    }, /* 2 and " -> 2 and @ */
+  [KC_2]    = { KC_2,    KC_LBRC    }, /* 2 and " -> 2 and @ */
-    [KC_3]    = { KC_3,    KC_HASH    }, /* 3 and # -> 3 and # */
+  [KC_3]    = { KC_3,    KC_HASH    }, /* 3 and # -> 3 and # */
-    [KC_4]    = { KC_4,    KC_DLR     }, /* 4 and $ -> 4 and $ */
+  [KC_4]    = { KC_4,    KC_DLR     }, /* 4 and $ -> 4 and $ */
-    [KC_5]    = { KC_5,    KC_PERC    }, /* 5 and % -> 5 and % */
+  [KC_5]    = { KC_5,    KC_PERC    }, /* 5 and % -> 5 and % */
-    [KC_6]    = { KC_6,    KC_EQL     }, /* 6 and & -> 6 and ^ */
+  [KC_6]    = { KC_6,    KC_EQL     }, /* 6 and & -> 6 and ^ */
-    [KC_7]    = { KC_7,    KC_CIRC    }, /* 7 and ' -> 7 and & */
+  [KC_7]    = { KC_7,    KC_CIRC    }, /* 7 and ' -> 7 and & */
-    [KC_8]    = { KC_8,    KC_DQT     }, /* 8 and ( -> 8 and * */
+  [KC_8]    = { KC_8,    KC_DQT     }, /* 8 and ( -> 8 and * */
-    [KC_9]    = { KC_9,    KC_ASTR    }, /* 9 and ) -> 9 and ( */
+  [KC_9]    = { KC_9,    KC_ASTR    }, /* 9 and ) -> 9 and ( */
-    [KC_0]    = { KC_0,    KC_LPRN    }, /* 0 and (no assign) -> 0 and ) */
+  [KC_0]    = { KC_0,    KC_LPRN    }, /* 0 and (no assign) -> 0 and ) */
-    [KC_MINS] = { KC_MINS, S(KC_RO)   }, /* - and = -> - and _ */
+  [KC_MINS] = { KC_MINS, S(KC_RO)   }, /* - and = -> - and _ */
-    [KC_EQL]  = { KC_UNDS, KC_COLN    }, /* ^ and ~ -> = and + */
+  [KC_EQL]  = { KC_UNDS, KC_COLN    }, /* ^ and ~ -> = and + */
-    [KC_LBRC] = { KC_RBRC, KC_RCBR    }, /* @ and ` -> [ and { */
+  [KC_LBRC] = { KC_RBRC, KC_RCBR    }, /* @ and ` -> [ and { */
-    [KC_RBRC] = { KC_BSLS, KC_PIPE    }, /* [ and { -> ] and } */
+  [KC_RBRC] = { KC_BSLS, KC_PIPE    }, /* [ and { -> ] and } */
-    [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */
+  [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */
-    [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */
+  [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */
-    [KC_SCLN] = { KC_SCLN, KC_QUOT    }, /* ; and + -> ; and : */
+  [KC_SCLN] = { KC_SCLN, KC_QUOT    }, /* ; and + -> ; and : */
-    [KC_QUOT] = { KC_AMPR, KC_AT      }, /* : and * -> ' and " */
+  [KC_QUOT] = { KC_AMPR, KC_AT      }, /* : and * -> ' and " */
-    [KC_GRV]  = { KC_LCBR, KC_PLUS    }, /* (no assign) -> ` and ~ */
+  [KC_GRV]  = { KC_LCBR, KC_PLUS    }, /* (no assign) -> ` and ~ */
-    [KC_COMM] = { KC_COMM, KC_LT      }, /* , and < -> , and < */
+  [KC_COMM] = { KC_COMM, KC_LT      }, /* , and < -> , and < */
-    [KC_DOT]  = { KC_DOT,  KC_GT      }, /* . and > -> . and > */
+  [KC_DOT]  = { KC_DOT,  KC_GT      }, /* . and > -> . and > */
-    [KC_SLSH] = { KC_SLSH, KC_QUES    }, /* / and ? -> / and ? */
+  [KC_SLSH] = { KC_SLSH, KC_QUES    }, /* / and ? -> / and ? */
 };
 
 #endif

keyboards/comet46/keymaps/satt/rules.mk

@@ -1,26 +1,8 @@
 SRC += action_pseudo_lut.c
 
-# Build Options
+# If you want to change display settings of the OLED, you need to change the following lines
-#   change to "no" to disable the options, or define them in the Makefile in
+SRC +=  ./lib/glcdfont.c \
-#   the appropriate keymap folder that will get included automatically
+		./lib/keylogger.c \
-#
+        ./lib/modifier_state_reader.c \
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+        ./lib/host_led_state_reader.c
-MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
-ONEHAND_ENABLE = no        # Enable one-hand typing
 
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/comet46/lib/glcdfont.c

@@ -0,0 +1,148 @@
+// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0.
+// See gfxfont.h for newer custom bitmap font info.
+
+#ifndef FONT5X7_H
+#define FONT5X7_H
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#elif defined(ESP8266)
+ #include <pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+// Standard ASCII 5x7 font
+
+const unsigned char font[] PROGMEM = {
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
+  0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
+  0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
+  0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
+  0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
+  0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
+  0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
+  0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
+  0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
+  0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
+  0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
+  0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
+  0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
+  0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
+  0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
+  0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
+  0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
+  0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
+  0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
+  0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
+  0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
+  0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
+  0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
+  0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+  0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
+  0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
+  0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
+  0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
+  0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
+  0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
+  0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
+  0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
+  0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
+  0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
+  0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
+  0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
+  0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
+  0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
+  0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
+  0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
+  0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
+  0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
+  0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
+  0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
+  0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
+  0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
+  0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+  0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
+  0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
+  0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
+  0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
+  0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
+  0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
+  0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
+  0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
+  0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
+  0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
+  0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
+  0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
+  0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
+  0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
+  0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
+  0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
+  0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
+  0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
+  0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
+  0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
+  0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
+  0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
+  0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
+  0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
+  0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+  0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
+  0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
+  0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
+  0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
+  0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
+  0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
+  0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
+  0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
+  0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
+  0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
+  0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
+  0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
+  0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
+  0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
+  0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
+  0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
+  0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
+  0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
+  0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
+  0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
+  0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
+  0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
+  0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
+  0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
+  0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+  0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
+  0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
+  0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
+  0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
+  0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
+  0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
+  0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
+  0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
+  0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
+  0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
+  0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
+  0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
+  0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
+  0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
+  0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
+  0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
+  0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
+  0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
+  0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
+  0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
+  0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
+  0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
+  0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
+  0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
+  0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+  0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
+  0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
+  0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00
+};
+#endif // FONT5X7_H

keyboards/comet46/lib/host_led_state_reader.c

@@ -0,0 +1,15 @@
+#include <stdio.h>
+#include "comet46.h"
+
+char host_led_state_str[22];
+
+const char *read_host_led_state(void) {
+  uint8_t leds = host_keyboard_leds();
+
+  snprintf(host_led_state_str, sizeof(host_led_state_str), "Lock: %s%s%s",
+           (leds & (1 << USB_LED_CAPS_LOCK)) ? "CAPL " : "",
+           (leds & (1 << USB_LED_SCROLL_LOCK)) ? "SCRL " : "",
+           (leds & (1 << USB_LED_NUM_LOCK)) ? "NUML" : "");
+
+  return host_led_state_str;
+}

keyboards/comet46/lib/keylogger.c

@@ -0,0 +1,294 @@
+#include <stdio.h>
+
+#ifdef __AVR__
+ #include <avr/io.h>
+ #include <avr/pgmspace.h>
+#else
+ #define PROGMEM
+#endif
+
+#define NUM_USB_HID_KEYCODES 255
+#define LEN_KEYCODE_STR 4
+
+char keylog[22] = {"KC:       ID: "};
+
+// Quick and dirty way to display USB HID keycodes used in QMK
+// USB HID keycodes from 0x0000 to 0x00FF are stored in a 4x256+1 length char
+const char code_to_name[] PROGMEM = {
+  "NO  " //0x00
+  "TRNS"
+  "?   "
+  "?   "
+  "A   "
+  "B   "
+  "C   "
+  "D   "
+  "E   "
+  "F   "
+  "G   "
+  "H   "
+  "I   "
+  "J   "
+  "K   "
+  "L   "
+  "M   " //0x10
+  "N   "
+  "O   "
+  "P   "
+  "Q   "
+  "R   "
+  "S   "
+  "T   "
+  "U   "
+  "V   "
+  "W   "
+  "X   "
+  "Y   "
+  "Z   "
+  "1   "
+  "2   "
+  "3   "  //0x20
+  "4   "
+  "5   "
+  "6   "
+  "7   "
+  "8   "
+  "9   "
+  "0   "
+  "ENT "
+  "ESC "
+  "BSPC"
+  "TAB "
+  "SPC "
+  "MINS"
+  "EQL "
+  "LBRC"
+  "RBRC" //0x30
+  "BSLS"
+  "NUHS"
+  "SCLN"
+  "QUOT"
+  "GRV "
+  "COMM"
+  "DOT "
+  "SLSH"
+  "CAPS"
+  "F1  "
+  "F2  "
+  "F3  "
+  "F4  "
+  "F5  "
+  "F6  "
+  "F7  " //0x40
+  "F8  "
+  "F9  "
+  "F10 "
+  "F11 "
+  "F12 "
+  "PSCR"
+  "SLCK"
+  "PAUS"
+  "INS "
+  "HOME"
+  "PGUP"
+  "DEL "
+  "END "
+  "PGDN"
+  "RGHT"
+  "LEFT" //0x50
+  "DOWN"
+  "UP  "
+  "NLCK"
+  "PSLS"
+  "PAST"
+  "PMNS"
+  "PPLS"
+  "PENT"
+  "P1  "
+  "P2  "
+  "P3  "
+  "P4  "
+  "P5  "
+  "P6  "
+  "P7  "
+  "P8  " //0x60
+  "P9  "
+  "P0  "
+  "PDOT"
+  "NUBS"
+  "APP "
+  "POW "
+  "PEQL"
+  "F13 "
+  "F14 "
+  "F15 "
+  "F16 "
+  "F17 "
+  "F18 "
+  "F19 "
+  "F20 "
+  "F21 " //0x70
+  "F22 "
+  "F23 "
+  "F24 "
+  "EXEC"
+  "HELP"
+  "MENU"
+  "SLCT"
+  "STOP"
+  "AGIN"
+  "UNDO"
+  "CUT "
+  "COPY"
+  "PSTE"
+  "FIND"
+  "_MUT"
+  "_VUP" //0x80
+  "_VDN"
+  "LCAP"
+  "LNUM"
+  "LSCR"
+  "PCMM"
+  "PEQA"
+  "INT1"
+  "INT2"
+  "INT3"
+  "INT4"
+  "INT5"
+  "INT6"
+  "INT7"
+  "INT8"
+  "INT9"
+  "LAN1" //0x90
+  "LAN2"
+  "LAN3"
+  "LAN4"
+  "LAN5"
+  "LAN6"
+  "LAN7"
+  "LAN8"
+  "LAN9"
+  "ERAS"
+  "SYSR"
+  "CNCL"
+  "CLR "
+  "PRIR"
+  "RTRN"
+  "SEP "
+  "OUT " //0xA0
+  "OPER"
+  "CLRA"
+  "CSEL"
+  "ESEL"
+  "PWR " //0xA5
+  "SLEP"
+  "WAKE"
+  "MUTE"
+  "VOLU"
+  "VOLD"
+  "MNXT"
+  "MPRV"
+  "MSTP"
+  "MPLY"
+  "MSEL"
+  "EJCT" //0xB0
+  "MAIL"
+  "CALC"
+  "MYCM"
+  "WSCH"
+  "WHOM"
+  "WBAK"
+  "WFWD"
+  "WSTP"
+  "WREF"
+  "WFAV"
+  "MFFD"
+  "MRWD"
+  "BRIU"
+  "BRID"
+  "?   "
+  "FN0 " //0xC0
+  "FN1 "
+  "FN2 "
+  "FN3 "
+  "FN4 "
+  "FN5 "
+  "FN6 "
+  "FN7 "
+  "FN8 "
+  "FN9 "
+  "FN10"
+  "FN11"
+  "FN12"
+  "FN13"
+  "FN14"
+  "FN15"
+  "FN16" //0xD0
+  "FN17"
+  "FN18"
+  "FN19"
+  "FN20"
+  "FN21"
+  "FN22"
+  "FN23"
+  "FN24"
+  "FN25"
+  "FN26"
+  "FN27"
+  "FN28"
+  "FN29"
+  "FN30"
+  "FN31"
+  "LCTL" //0xE0
+  "LSFT"
+  "LALT"
+  "LGUI"
+  "RCTL"
+  "RSFT"
+  "RALT"
+  "RGUI"
+  "?   "
+  "?   "
+  "?   "
+  "?   "
+  "?   "
+  "?   "
+  "?   "
+  "?   "
+  "MS_U" //0xF0
+  "MS_D"
+  "MS_L"
+  "MS_R"
+  "BTN1"
+  "BTN2"
+  "BTN3"
+  "BTN4"
+  "BTN5"
+  "WH_U"
+  "WH_D"
+  "WH_L"
+  "WH_R"
+  "ACL0"
+  "ACL1"
+  "ACL2"
+};
+
+void set_keylog(uint16_t keycode)
+{
+  char name[LEN_KEYCODE_STR+1] = "?   ";
+
+  if (keycode <= NUM_USB_HID_KEYCODES) {
+    for (uint8_t k = 0; k < LEN_KEYCODE_STR; k++) {
+      name[k] =  pgm_read_byte_near(code_to_name + keycode * LEN_KEYCODE_STR + k);
+    }
+  } else if (keycode > NUM_USB_HID_KEYCODES) {
+    snprintf(name, sizeof(name), "QMK ");
+  }
+
+  // update keylog
+  snprintf(keylog, sizeof(keylog), "KC: %s  ID: %d", name, keycode);
+}
+
+const char *read_keylog(void) {
+  return keylog;
+}

keyboards/comet46/lib/modifier_state_reader.c

@@ -0,0 +1,18 @@
+#include <stdio.h>
+#include "comet46.h"
+
+char modifier_state_str[22];
+
+const char *read_modifier_state(void) {
+  uint8_t modifiers = get_mods();
+  uint8_t one_shot = get_oneshot_mods();
+  
+  snprintf(modifier_state_str, sizeof(modifier_state_str), "Mod: %s%s%s%s",
+    (modifiers & MODS_CTRL_MASK || one_shot & MODS_CTRL_MASK) ? "CTL " : "",
+    (modifiers & MODS_GUI_MASK || one_shot & MODS_GUI_MASK) ? "GUI " : "",
+    (modifiers & MODS_ALT_MASK || one_shot & MODS_ALT_MASK) ? "ALT " : "",
+    (modifiers & MODS_SHIFT_MASK || one_shot & MODS_SHIFT_MASK) ? "SFT" : ""
+  );
+
+  return modifier_state_str;
+}

keyboards/comet46/readme.md

@@ -1,6 +1,6 @@
 # Comet46
 
-![Comet46](https://user-images.githubusercontent.com/39004890/42418180-d5bb188c-82d5-11e8-99fa-65020ce5ac5d.jpg)
+![Comet46](https://user-images.githubusercontent.com/39004890/50396817-a1660600-07af-11e9-8611-3156c635db43.jpg)
 
 A split wireless 40% column-staggered keyboard 
 
@@ -13,4 +13,5 @@ Make example for this keyboard (after setting up your build environment):
 
     make comet46:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+

keyboards/comet46/rules.mk

@@ -1,12 +1,8 @@
-
-OPT_DEFS += -DCOMET46_ORTHO_===PROMICRO
-COMET46_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
-                         avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
-
 # # project specific files
-SRC = matrix.c
+SRC += matrix.c \
-
+       i2c.c \
-
+       ssd1306.c 
+       
 # MCU name
 #MCU = at90usb1287
 MCU = atmega32u4
@@ -24,8 +20,6 @@ MCU = atmega32u4
 #     software delays.
 F_CPU = 16000000
 
-
-#
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
@@ -48,7 +42,7 @@ F_USB = $(F_CPU)
 #     This definition is optional, and if your keyboard supports multiple bootloaders of
 #     different sizes, comment this out, and the correct address will be loaded 
 #     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
+# BOOTLOADER = caterina
 
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT

keyboards/comet46/ssd1306.c

@@ -0,0 +1,344 @@
+#ifdef SSD1306OLED
+
+#include "ssd1306.h"
+#include "i2c.h"
+#include <string.h>
+#include "print.h"
+#ifdef ADAFRUIT_BLE_ENABLE
+#include "adafruit_ble.h"
+#endif
+#ifdef PROTOCOL_LUFA
+#include "lufa.h"
+#endif
+#include "sendchar.h"
+#include "timer.h"
+
+static const unsigned char font[] PROGMEM;
+
+// Set this to 1 to help diagnose early startup problems
+// when testing power-on with ble.  Turn it off otherwise,
+// as the latency of printing most of the debug info messes
+// with the matrix scan, causing keys to drop.
+#define DEBUG_TO_SCREEN 0
+
+//static uint16_t last_battery_update;
+//static uint32_t vbat;
+//#define BatteryUpdateInterval 10000 /* milliseconds */
+
+// 'last_flush' is declared as uint16_t,
+// so this must be less than 65535 
+#define ScreenOffInterval 60000 /* milliseconds */
+#if DEBUG_TO_SCREEN
+static uint8_t displaying;
+#endif
+static uint16_t last_flush;
+
+static bool force_dirty = true;
+
+// Write command sequence.
+// Returns true on success.
+static inline bool _send_cmd1(uint8_t cmd) {
+  bool res = false;
+
+  if (i2c_start_write(SSD1306_ADDRESS)) {
+    xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
+    goto done;
+  }
+
+  if (i2c_master_write(0x0 /* command byte follows */)) {
+    print("failed to write control byte\n");
+
+    goto done;
+  }
+
+  if (i2c_master_write(cmd)) {
+    xprintf("failed to write command %d\n", cmd);
+    goto done;
+  }
+  res = true;
+done:
+  i2c_master_stop();
+  return res;
+}
+
+// Write 2-byte command sequence.
+// Returns true on success
+static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
+  if (!_send_cmd1(cmd)) {
+    return false;
+  }
+  return _send_cmd1(opr);
+}
+
+// Write 3-byte command sequence.
+// Returns true on success
+static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
+  if (!_send_cmd1(cmd)) {
+    return false;
+  }
+  if (!_send_cmd1(opr1)) {
+    return false;
+  }
+  return _send_cmd1(opr2);
+}
+
+#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
+#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
+#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
+
+static void clear_display(void) {
+  matrix_clear(&display);
+
+  // Clear all of the display bits (there can be random noise
+  // in the RAM on startup)
+  send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
+  send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
+
+  if (i2c_start_write(SSD1306_ADDRESS)) {
+    goto done;
+  }
+  if (i2c_master_write(0x40)) {
+    // Data mode
+    goto done;
+  }
+  for (uint8_t row = 0; row < MatrixRows; ++row) {
+    for (uint8_t col = 0; col < DisplayWidth; ++col) {
+      i2c_master_write(0);
+    }
+  }
+
+  display.dirty = false;
+
+done:
+  i2c_master_stop();
+}
+
+#if DEBUG_TO_SCREEN
+#undef sendchar
+static int8_t capture_sendchar(uint8_t c) {
+  sendchar(c);
+  iota_gfx_write_char(c);
+
+  if (!displaying) {
+    iota_gfx_flush();
+  }
+  return 0;
+}
+#endif
+
+bool iota_gfx_init(bool rotate) {
+  bool success = false;
+
+  i2c_master_init();
+  send_cmd1(DisplayOff);
+  send_cmd2(SetDisplayClockDiv, 0x80);
+  send_cmd2(SetMultiPlex, DisplayHeight - 1);
+
+  send_cmd2(SetDisplayOffset, 0);
+
+
+  send_cmd1(SetStartLine | 0x0);
+  send_cmd2(SetChargePump, 0x14 /* Enable */);
+  send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
+
+  if(rotate){
+    // the following Flip the display orientation 180 degrees
+    send_cmd1(SegRemap);
+    send_cmd1(ComScanInc);
+  }else{
+    // Flips the display orientation 0 degrees
+    send_cmd1(SegRemap | 0x1);
+    send_cmd1(ComScanDec);
+  }
+
+  send_cmd2(SetComPins, 0x2);
+  send_cmd2(SetContrast, 0x8f);
+  send_cmd2(SetPreCharge, 0xf1);
+  send_cmd2(SetVComDetect, 0x40);
+  send_cmd1(DisplayAllOnResume);
+  send_cmd1(NormalDisplay);
+  send_cmd1(DeActivateScroll);
+  send_cmd1(DisplayOn);
+
+  send_cmd2(SetContrast, 0); // Dim
+
+  clear_display();
+
+  success = true;
+
+  iota_gfx_flush();
+
+#if DEBUG_TO_SCREEN
+  print_set_sendchar(capture_sendchar);
+#endif
+
+done:
+  return success;
+}
+
+bool iota_gfx_off(void) {
+  bool success = false;
+
+  send_cmd1(DisplayOff);
+  success = true;
+
+done:
+  return success;
+}
+
+bool iota_gfx_on(void) {
+  bool success = false;
+
+  send_cmd1(DisplayOn);
+  success = true;
+
+done:
+  return success;
+}
+
+void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
+  *matrix->cursor = c;
+  ++matrix->cursor;
+
+  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
+    // We went off the end; scroll the display upwards by one line
+    memmove(&matrix->display[0], &matrix->display[1],
+            MatrixCols * (MatrixRows - 1));
+    matrix->cursor = &matrix->display[MatrixRows - 1][0];
+    memset(matrix->cursor, ' ', MatrixCols);
+  }
+}
+
+void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
+  matrix->dirty = true;
+
+  if (c == '\n') {
+    // Clear to end of line from the cursor and then move to the
+    // start of the next line
+    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
+
+    while (cursor_col++ < MatrixCols) {
+      matrix_write_char_inner(matrix, ' ');
+    }
+    return;
+  }
+
+  matrix_write_char_inner(matrix, c);
+}
+
+void iota_gfx_write_char(uint8_t c) {
+  matrix_write_char(&display, c);
+}
+
+void matrix_write(struct CharacterMatrix *matrix, const char *data) {
+  const char *end = data + strlen(data);
+  while (data < end) {
+    matrix_write_char(matrix, *data);
+    ++data;
+  }
+}
+
+void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) {
+  char data_ln[strlen(data)+2];
+  snprintf(data_ln, sizeof(data_ln), "%s\n", data);
+  matrix_write(matrix, data_ln);
+}
+
+void iota_gfx_write(const char *data) {
+  matrix_write(&display, data);
+}
+
+void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
+  while (true) {
+    uint8_t c = pgm_read_byte(data);
+    if (c == 0) {
+      return;
+    }
+    matrix_write_char(matrix, c);
+    ++data;
+  }
+}
+
+void iota_gfx_write_P(const char *data) {
+  matrix_write_P(&display, data);
+}
+
+void matrix_clear(struct CharacterMatrix *matrix) {
+  memset(matrix->display, ' ', sizeof(matrix->display));
+  matrix->cursor = &matrix->display[0][0];
+  matrix->dirty = true;
+}
+
+void iota_gfx_clear_screen(void) {
+  matrix_clear(&display);
+}
+
+void matrix_render(struct CharacterMatrix *matrix) {
+  last_flush = timer_read();
+  iota_gfx_on();
+#if DEBUG_TO_SCREEN
+  ++displaying;
+#endif
+
+  // Move to the home position
+  send_cmd3(PageAddr, 0, MatrixRows - 1);
+  send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
+
+  if (i2c_start_write(SSD1306_ADDRESS)) {
+    goto done;
+  }
+  if (i2c_master_write(0x40)) {
+    // Data mode
+    goto done;
+  }
+
+  for (uint8_t row = 0; row < MatrixRows; ++row) {
+    for (uint8_t col = 0; col < MatrixCols; ++col) {
+      const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
+
+      for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
+        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
+        i2c_master_write(colBits);
+      }
+
+      // 1 column of space between chars (it's not included in the glyph)
+      //i2c_master_write(0);
+    }
+  }
+
+  matrix->dirty = false;
+
+done:
+  i2c_master_stop();
+#if DEBUG_TO_SCREEN
+  --displaying;
+#endif
+}
+
+void iota_gfx_flush(void) {
+  matrix_render(&display);
+}
+
+__attribute__ ((weak))
+void iota_gfx_task_user(void) {
+}
+
+void iota_gfx_task(void) {
+  iota_gfx_task_user();
+
+  if (display.dirty|| force_dirty) {
+    iota_gfx_flush();
+    force_dirty = false;
+  }
+
+  if (timer_elapsed(last_flush) > ScreenOffInterval) {
+    iota_gfx_off();
+  }
+}
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
+  force_dirty = true;
+  return true;
+}
+
+#endif

keyboards/comet46/ssd1306.h

@@ -0,0 +1,91 @@
+#pragma once
+
+#include <stdbool.h>
+#include <stdio.h>
+#include "pincontrol.h"
+#include "action.h"
+
+enum ssd1306_cmds {
+  DisplayOff = 0xAE,
+  DisplayOn = 0xAF,
+
+  SetContrast = 0x81,
+  DisplayAllOnResume = 0xA4,
+
+  DisplayAllOn = 0xA5,
+  NormalDisplay = 0xA6,
+  InvertDisplay = 0xA7,
+  SetDisplayOffset = 0xD3,
+  SetComPins = 0xda,
+  SetVComDetect = 0xdb,
+  SetDisplayClockDiv = 0xD5,
+  SetPreCharge = 0xd9,
+  SetMultiPlex = 0xa8,
+  SetLowColumn = 0x00,
+  SetHighColumn = 0x10,
+  SetStartLine = 0x40,
+
+  SetMemoryMode = 0x20,
+  ColumnAddr = 0x21,
+  PageAddr = 0x22,
+
+  ComScanInc = 0xc0,
+  ComScanDec = 0xc8,
+  SegRemap = 0xa0,
+  SetChargePump = 0x8d,
+  ExternalVcc = 0x01,
+  SwitchCapVcc = 0x02,
+
+  ActivateScroll = 0x2f,
+  DeActivateScroll = 0x2e,
+  SetVerticalScrollArea = 0xa3,
+  RightHorizontalScroll = 0x26,
+  LeftHorizontalScroll = 0x27,
+  VerticalAndRightHorizontalScroll = 0x29,
+  VerticalAndLeftHorizontalScroll = 0x2a,
+};
+
+// Controls the SSD1306 128x32 OLED display via i2c
+
+#ifndef SSD1306_ADDRESS
+#define SSD1306_ADDRESS 0x3C
+#endif
+
+#define DisplayHeight 32
+#define DisplayWidth 128
+
+#define FontHeight 8
+#define FontWidth 6
+
+#define MatrixRows (DisplayHeight / FontHeight)
+#define MatrixCols (DisplayWidth / FontWidth)
+
+struct CharacterMatrix {
+  uint8_t display[MatrixRows][MatrixCols];
+  uint8_t *cursor;
+  bool dirty;
+};
+
+struct CharacterMatrix display;
+
+bool iota_gfx_init(bool rotate);
+void iota_gfx_task(void);
+bool iota_gfx_off(void);
+bool iota_gfx_on(void);
+void iota_gfx_flush(void);
+void iota_gfx_write_char(uint8_t c);
+void iota_gfx_write(const char *data);
+void iota_gfx_write_P(const char *data);
+void iota_gfx_clear_screen(void);
+
+void iota_gfx_task_user(void);
+
+void matrix_clear(struct CharacterMatrix *matrix);
+void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c);
+void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
+void matrix_write(struct CharacterMatrix *matrix, const char *data);
+void matrix_write_ln(struct CharacterMatrix *matrix, const char *data);
+void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
+void matrix_render(struct CharacterMatrix *matrix);
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record);

keyboards/contra/keymaps/dana/rules.mk

@@ -20,6 +20,3 @@ RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/contra/keymaps/losinggeneration/rules.mk

@@ -12,6 +12,3 @@ MIDI_ENABLE      = no    # MIDI controls
 NKRO_ENABLE      = no    # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 RGBLIGHT_ENABLE  = no    # Enable WS2812 RGB underlight. 
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/contra/keymaps/maxr1998/keymap.c

@@ -127,11 +127,11 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
       return true;
     case NR_L3:
       if (record->event.pressed) {
-        register_code(DE_ALGR);
+        register_code(KC_ALGR);
         layer_on(_NUMROW_L3);
       } else {
         layer_off(_NUMROW_L3);
-        unregister_code(DE_ALGR);
+        unregister_code(KC_ALGR);
       }
       return false;
     default:

keyboards/contra/keymaps/maxr1998/rules.mk

@@ -9,6 +9,3 @@ MOUSEKEY_ENABLE = no
 CONSOLE_ENABLE  = no # yes
 COMMAND_ENABLE  = no
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/crkbd/keymaps/drashna/keymap.c

@@ -88,16 +88,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 void matrix_init_keymap(void) {
-    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+  //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
-    #ifdef SSD1306OLED
+  #ifdef SSD1306OLED
-        iota_gfx_init(!has_usb());   // turns on the display
+    iota_gfx_init(!has_usb());   // turns on the display
-    #endif
+  #endif
 
-  DDRD &= ~(1<<5);
+  #ifndef CONVERT_TO_PROTON_C
-  PORTD &= ~(1<<5);
+    setPinOutput(D5);
+    writePinHigh(D5);
 
-  DDRB &= ~(1<<0);
+    setPinOutput(B0);
-  PORTB &= ~(1<<0);
+    writePinHigh(B0);
+  #endif
 }
 
 //SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
@@ -126,10 +128,10 @@ const char code_to_name[60] = {
 
 void set_keylog(uint16_t keycode, keyrecord_t *record) {
   char name = ' ';
+  if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { keycode = keycode & 0xFF; }
   if (keycode < 60) {
     name = code_to_name[keycode];
   }
-
   // update keylog
   snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
            record->event.key.row, record->event.key.col,

keyboards/cu75/keymaps/default/rules.mk

@@ -23,10 +23,6 @@ ISSI_ENABLE = yes               # If the I2C pullup resistors aren't install thi
 WATCHDOG_ENABLE = no           # Resets keyboard if matrix_scan isn't run every 250ms
 
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
-
 ifeq ($(strip $(ISSI_ENABLE)), yes)
     TMK_COMMON_DEFS += -DISSI_ENABLE
 endif

keyboards/cu75/keymaps/iso/rules.mk

@@ -23,10 +23,6 @@ ISSI_ENABLE = no               # If the I2C pullup resistors aren't install this
 WATCHDOG_ENABLE = yes           # Resets keyboard if matrix_scan isn't run every 250ms
 
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif
-
 ifeq ($(strip $(ISSI_ENABLE)), yes)
     TMK_COMMON_DEFS += -DISSI_ENABLE
 endif

keyboards/cyclops/keymaps/default/keymap.c

@@ -1,65 +0,0 @@
-/* Copyright 2018 'mechmerlin'
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-// Defines the keycodes used by our macros in process_record_user
-enum custom_keycodes {
-  QMKBEST = SAFE_RANGE,
-  QMKURL
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = LAYOUT(
-		KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PGUP,
-		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGDN,
-		KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_RGHT,
-		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(1), KC_0, KC_UP,
-		KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_ENT, KC_DOWN),
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
-    case QMKBEST:
-      if (record->event.pressed) {
-        // when keycode QMKBEST is pressed
-        SEND_STRING("QMK is the best thing ever!");
-      } else {
-        // when keycode QMKBEST is released
-      }
-      break;
-    case QMKURL:
-      if (record->event.pressed) {
-        // when keycode QMKURL is pressed
-        SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
-      } else {
-        // when keycode QMKURL is released
-      }
-      break;
-  }
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/deltasplit75/keymaps/itsaferbie/rules.mk

@@ -2,6 +2,3 @@ RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
 AUDIO_ENABLE = no            # Audio disabled while using RGB underlight.
 EXTRAKEY_ENABLE = yes
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/dichotomy/info.json

@@ -6,7 +6,7 @@
   "height": 6,
   "layouts": {
     "LAYOUT": {
-      "layout": [{"label":"k00", "x":0, "y":0.5}, {"label":"k01", "x":1, "y":0.5}, {"label":"k02", "x":2, "y":0.25}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0.5}, {"label":"k05", "x":5, "y":0.5}, {"label":"k06", "x":7, "y":0.5}, {"label":"k07", "x":8, "y":0.5}, {"label":"k08", "x":9, "y":0}, {"label":"k09", "x":10, "y":0.25}, {"label":"k0A", "x":11, "y":0.5}, {"label":"k0B", "x":12, "y":0.5}, {"label":"k10", "x":0, "y":1.5}, {"label":"k11", "x":1, "y":1.5}, {"label":"k12", "x":2, "y":1.25}, {"label":"k13", "x":3, "y":1}, {"label":"k14", "x":4, "y":1.5}, {"label":"k15", "x":5, "y":1.5}, {"label":"k16", "x":7, "y":1.5}, {"label":"k17", "x":8, "y":1.5}, {"label":"k18", "x":9, "y":1}, {"label":"k19", "x":10, "y":1.25}, {"label":"k1A", "x":11, "y":1.5}, {"label":"k1B", "x":12, "y":1.5}, {"label":"k20", "x":0, "y":2.5}, {"label":"k21", "x":1, "y":2.5}, {"label":"k22", "x":2, "y":2.25}, {"label":"k23", "x":3, "y":2}, {"label":"k24", "x":4, "y":2.5}, {"label":"k25", "x":5, "y":2.5}, {"label":"k26", "x":7, "y":2.5}, {"label":"k27", "x":8, "y":2.5}, {"label":"k28", "x":9, "y":2}, {"label":"k29", "x":10, "y":2.25}, {"label":"k2A", "x":11, "y":2.5}, {"label":"k2B", "x":12, "y":2.5}, {"label":"k33", "x":3, "y":4}, {"label":"k34", "x":4, "y":4}, {"label":"k35", "x":5, "y":4}, {"label":"k36", "x":7, "y":4}, {"label":"k37", "x":8, "y":4}, {"label":"k38", "x":9, "y":4}, {"label":"k43", "x":3, "y":5}, {"label":"k44", "x":4, "y":5}, {"label":"k45", "x":5, "y":5}, {"label":"k46", "x":7, "y":5}, {"label":"k47", "x":8, "y":5}, {"label":"k48", "x":9, "y":5}]
+      "layout": [{"label":"k00", "x":0, "y":0.5}, {"label":"k01", "x":1, "y":0.5}, {"label":"k02", "x":2, "y":0.25}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4, "y":0.5}, {"label":"k05", "x":5, "y":0.5}, {"label":"k06", "x":7, "y":0.5}, {"label":"k07", "x":8, "y":0.5}, {"label":"k08", "x":9, "y":0}, {"label":"k09", "x":10, "y":0.25}, {"label":"k0A", "x":11, "y":0.5}, {"label":"k0B", "x":12, "y":0.5}, {"label":"k10", "x":0, "y":1.5}, {"label":"k11", "x":1, "y":1.5}, {"label":"k12", "x":2, "y":1.25}, {"label":"k13", "x":3, "y":1}, {"label":"k14", "x":4, "y":1.5}, {"label":"k15", "x":5, "y":1.5}, {"label":"k16", "x":7, "y":1.5}, {"label":"k17", "x":8, "y":1.5}, {"label":"k18", "x":9, "y":1}, {"label":"k19", "x":10, "y":1.25}, {"label":"k1A", "x":11, "y":1.5}, {"label":"k1B", "x":12, "y":1.5}, {"label":"k20", "x":0, "y":2.5}, {"label":"k21", "x":1, "y":2.5}, {"label":"k22", "x":2, "y":2.25}, {"label":"k23", "x":3, "y":2}, {"label":"k24", "x":4, "y":2.5}, {"label":"k25", "x":5, "y":2.5}, {"label":"k26", "x":7, "y":2.5}, {"label":"k27", "x":8, "y":2.5}, {"label":"k28", "x":9, "y":2}, {"label":"k29", "x":10, "y":2.25}, {"label":"k2A", "x":11, "y":2.5}, {"label":"k2B", "x":12, "y":2.5}, {"label":"k33", "x":3, "y":4}, {"label":"k34", "x":4, "y":4}, {"label":"k35", "x":5, "y":4}, {"label":"k36", "x":7, "y":4}, {"label":"k37", "x":8, "y":4}, {"label":"k38", "x":9, "y":4}, {"label":"k42", "x":2, "y":5}, {"label":"k43", "x":3, "y":5}, {"label":"k44", "x":4, "y":5}, {"label":"k45", "x":5, "y":5}, {"label":"k46", "x":7, "y":5}, {"label":"k47", "x":8, "y":5}, {"label":"k48", "x":9, "y":5}, {"label":"k49", "x":10, "y":5}]
     }
   }
 }

keyboards/dichotomy/keymaps/alairock/keymap.c

@@ -43,34 +43,34 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 [_RAISE] = LAYOUT( /* Shifted layout, small changes (because angle brackets have been moved to thumb cluster buttons) */
   _______, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,           KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
-  _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_MFFD,        KC_MUTE, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______,
+  _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_MFFD,        KC_MUTE, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC,  _______,
-  _______, _______, _______, _______, _______, KC_MRWD,        _______, _______, _______, KC_BSLS, KC_QUOT, _______,
+  _______, _______, KC_GRV,  _______, _______, KC_MRWD,        _______, _______, _______, KC_BSLS, KC_QUOT, _______,
                              _______, _______, _______,        _______, _______, _______,
                     _______, _______, KC_LABK, _______,        _______, KC_RABK, _______, _______
 ),
 
 [_LOWER] = LAYOUT( /* Number layout, basically the main function layer */
-  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,        KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+  _______, KC_EXLM, KC_AT,    KC_HASH, KC_DLR,  KC_PERC,       KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
-  _______, KC_F1,   KC_F2,   KC_F3,    KC_F4,    KC_F5,        KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______,
+  _______, _______, KC_VOLD,  KC_VOLU, KC_MPLY, KC_MFFD,       KC_MUTE, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______,
-  _______, KC_TILD, KC_GRV,  KC_F13,  KC_F14,  KC_F15,         KC_F16,  KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
+  _______, _______, KC_TILD,  _______, _______, KC_MRWD,       _______, _______, _______, KC_PIPE, KC_DQT,  _______,
-                             _______, _______, _______,        _______, _______, _______,
+                              _______, _______, _______,       _______, _______, _______,
-                    _______,   RAISE, _______, _______,        _______, _______, _______, _______
+                    _______,  RAISE,   _______, _______,       _______, _______, _______, _______
 ),
 
 [_ADJUST] = LAYOUT( /* Shifted number/function layout, for per-key control.  Only active when shift is held, and number is toggled or held */
-  _______, _______, _______, _______, _______, _______,        _______, _______, KC_UP, _______, _______, _______,
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,          _______, _______, KC_UP,   _______, _______, _______,
-  _______, _______, _______, _______, _______, _______,        _______, KC_LEFT, KC_DOWN, KC_RGHT, _______,  _______,
+  KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,         _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
-  _______, _______, _______, _______, _______, _______,        _______, _______, _______, _______, _______, _______,
+  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,         _______, _______, _______, _______, _______, _______,
-  							 _______, _______, _______,        _______, _______, _______,
+                             _______, _______, _______,        _______, _______, _______,
-					_______, _______, _______, _______,        _______, _______, _______, _______
+                    _______, _______, _______, _______,        _______, _______, _______, _______
 ),
 
 [_MOUSE] = LAYOUT( /* Mouse layer, including buttons for clicking. */
   _______, _______, _______, _______, _______, _______,        KC_VOLU, KC_HOME, KC_PGUP, _______, _______, _______,
   _______, _______, _______, _______, _______, _______,        _______, MS_BTN1, MS_BTN2, _______, _______, _______,
   _______, _______, _______, _______, _______, _______,        KC_VOLD, KC_END,  KC_PGDN, _______, _______, _______,
-  							 _______, _______, _______,        _______, KC_UP,   _______,
+                             _______, _______, _______,        _______, KC_UP,   _______,
-					_______, _______, _______, _______,        KC_LEFT, KC_DOWN, KC_RGHT, _______
+                    _______, _______, _______, _______,        KC_LEFT, KC_DOWN, KC_RGHT, _______
 )
 
 }; // end keymaps block

keyboards/dz60/dz60.c

@@ -23,11 +23,9 @@ void led_init_ports(void) {
 
 void led_set_kb(uint8_t usb_led) {
     if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-        DDRB |= (1 << 2);
         PORTB &= ~(1 << 2);
     } else {
-        DDRB &= ~(1 << 2);
+        PORTB |= (1 << 2);
-        PORTB &= ~(1 << 2);
     }
 
     led_set_user(usb_led);

keyboards/dz60/dz60.h

@@ -332,6 +332,33 @@
     { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
 }
 
+/* LAYOUT_60_tsangan
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │    0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
+ * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┤
+ * │40   │41 │43   │46 (7u)                    │4b   │4d │4e   │
+ * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
+*/
+#define LAYOUT_60_tsangan( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c,      k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b,      k3d, k3e, \
+    k40, k41,      k43,           k46,                     k4b,      k4d, k4e  \
+) { \
+    { k00,   k01,   k02,   k03,  k04,   k05,   k06,  k07,   k08,   k09,   k0a,   k0b,  k0c,   KC_NO,  k0e   }, \
+    { k10,   KC_NO, k12,   k13,  k14,   k15,   k16,  k17,   k18,   k19,   k1a,   k1b,  k1c,   k1d,    k1e   }, \
+    { k20,   KC_NO, k22,   k23,  k24,   k25,   k26,  k27,   k28,   k29,   k2a,   k2b,  k2c,   k2d,    KC_NO }, \
+    { k30,   KC_NO, k32,   k33,  k34,   k35,   k36,  k37,   k38,   k39,   k3a,   k3b,  KC_NO, k3d,    k3e   }, \
+    { k40,   k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, KC_NO, k4b,  KC_NO, k4d,    k4e   }  \
+}
+
 /* LAYOUT_60_tsangan_hhkb
  * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
  * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │

keyboards/dz60/info.json

@@ -53,6 +53,10 @@
       "key_count": 67,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"x":13, "y":0}, {"label":"Back Space", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"#", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"\\", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"Up", "x":13, "y":3}, {"label":"Del", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"Space", "x":3.75, "y":4, "w":2.25}, {"label":"Space", "x":6, "y":4, "w":1.25}, {"label":"Space", "x":7.25, "y":4, "w":2.75}, {"label":"AltGr", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Left", "x":12, "y":4}, {"label":"Down", "x":13, "y":4}, {"label":"Right", "x":14, "y":4}]
     },
+    "LAYOUT_60_tsangan": {
+      "keycount": 61,
+      "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]  
+    },
     "LAYOUT_60_tsangan_hhkb": {
       "key_count": 62,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Win", "x":11, "y":4, "w":1.5}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}]

keyboards/dz60/keymaps/60_tsangan/keymap.c

@@ -0,0 +1,32 @@
+#include QMK_KEYBOARD_H
+
+enum keyboard_layers {
+  _BL = 0, // Base Layer
+  _FL,      // Function Layer
+  _CL      // Control Layer
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[_BL] = LAYOUT_60_tsangan(
+		KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CAPS,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, MO(_FL),
+		KC_LCTL, KC_LGUI,          KC_LALT,                   KC_SPC,                                      KC_RALT,          KC_RGUI, KC_RCTL
+	),
+	[_FL] = LAYOUT_60_tsangan(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_DEL,
+		_______,          _______, KC_UP,   _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
+		_______,          KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_INS,  KC_HOME, KC_PGUP, _______,
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, KC_END,  KC_PGDN,          _______, _______,
+		_______, _______,          _______,                   _______,                                     _______,          MO(_CL), _______
+	),
+	[_CL] = LAYOUT_60_tsangan(
+		_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           _______,
+		_______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+		_______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+		_______,          _______, _______, _______, _______, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, _______, _______,          _______, _______,
+		_______, _______,          _______,                   _______,                                     _______,          _______, _______
+	)
+};

keyboards/eco/keymaps/default/rules.mk

@@ -20,6 +20,3 @@ RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/eco/keymaps/hexwire/rules.mk

@@ -20,6 +20,3 @@ RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/eco/keymaps/that_canadian/rules.mk

@@ -20,6 +20,3 @@ RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/ergodox_ez/keymaps/hacker_dvorak/config.h

@@ -5,26 +5,33 @@
 #pragma once
 
 
-/* Keyboard Settings */
 #undef  TAPPING_TERM
-#define TAPPING_TERM 150
+#define TAPPING_TERM 200
 
 #undef  DEBOUNCE
 #define DEBOUNCE 10
 
 #undef  IGNORE_MOD_TAP_INTERRUPT
-#define IGNORE_MOD_TAP_INTERRUPT
 
 #undef  FORCE_NKRO
 #define FORCE_NKRO
 
-/* This isn't defined by default, so there is no need to undefine it first. */
+#undef  TAPPING_TOGGLE
-#define LEADER_TIMEOUT 500
+#define TAPPING_TOGGLE 5
+
+#define LEADER_TIMEOUT 1000
+#define IGNORE_MOD_TAP_INTERRUPT
 #define PERMISSIVE_HOLD
 #define QMK_KEYS_PER_SCAN 4
+#define DANCING_TERM 175
+
+#define ONESHOT_TAP_TOGGLE 5
+#define ONESHOT_TIMEOUT 5000
+
+#define COMBO_COUNT 4
+#define COMBO_TERM 200
 
 
-// RGB Lights
 #undef  RGBLIGHT_HUE_STEP
 #define RGBLIGHT_HUE_STEP 24
 
@@ -40,11 +47,7 @@
 #undef  RGBLIGHT_LIMIT_VAL
 #define RGBLIGHT_LIMIT_VAL 255
 
-/* This isn't defined by default, so there is no need to undefine it first. */
-#define RGBLIGHT_SLEEP
 
-
-// Mouse
 #undef  MOUSEKEY_INTERVAL
 #define MOUSEKEY_INTERVAL 10
 
@@ -52,31 +55,34 @@
 #define MOUSEKEY_DELAY 15
 
 #undef  MOUSEKEY_MAX_SPEED
-#define MOUSEKEY_MAX_SPEED 15
+#define MOUSEKEY_MAX_SPEED 20
 
 #undef  MOUSEKEY_TIME_TO_MAX
-#define MOUSEKEY_TIME_TO_MAX 150
+#define MOUSEKEY_TIME_TO_MAX 200
 
 #undef  MOUSEKEY_WHEEL_MAX_SPEED
-#define MOUSEKEY_WHEEL_MAX_SPEED 15
+#define MOUSEKEY_WHEEL_MAX_SPEED 20
 
 #undef  MOUSEKEY_WHEEL_TIME_TO_MAX
-#define MOUSEKEY_WHEEL_TIME_TO_MAX 150
+#define MOUSEKEY_WHEEL_TIME_TO_MAX 200
 
 
-/* This is defined only if CONSOLE_ENABLE is set to "yes" */
 // #undef  NO_DEBUG
 // #define NO_DEBUG
 
 // #undef  NO_PRINT
 // #define NO_PRINT
 
-/* For COMBO only*/
+// #define RETRO_TAPPING
-// #define COMBO_COUNT 1
+// #define TAPPING_FORCE_HOLD
-// #define COMBO_TERM 200
 
-/* For tap toggle */
+// #define AUTO_SHIFT_TIMEOUT 150
-// #define TAPPING_TOGGLE 2
+// #define NO_AUTO_SHIFT_SPECIAL
-// #define ONESHOT_TAP_TOGGLE 2
+// #define NO_AUTO_SHIFT_NUMERIC
-// #define ONESHOT_TIMEOUT 300
+// #define NO_AUTO_SHIFT_ALPHA
 
+// #define EXTRA_LONG_COMBOS
+// #define EXTRA_EXTRA_LONG_COMBOS
+// #define COMBO_ALLOW_ACTION_KEYS
+
+// #define RGBLIGHT_SLEEP

keyboards/ergodox_ez/keymaps/hacker_dvorak/default.png.md

@@ -1 +0,0 @@
-https://i.imgur.com/fKX0Zbs.png

keyboards/ergodox_ez/keymaps/hacker_dvorak/default_highres.png.md

@@ -1 +0,0 @@
-https://i.imgur.com/giAc3M9.jpg

keyboards/ergodox_ez/keymaps/hacker_dvorak/gulpfile.js

@@ -1,7 +1,7 @@
 let gulp = require('gulp');
 let run = require('gulp-run-command').default;
 
- 
+
 gulp.task('clean', run('rm -rf ../../../../.build'));
 
 gulp.task('build', ['clean'], run('make -C ../../../../ ergodox_ez:hacker_dvorak', {
@@ -9,5 +9,11 @@ gulp.task('build', ['clean'], run('make -C ../../../../ ergodox_ez:hacker_dvorak
 }));
 
 gulp.task('watch', ['build'], () => {
-    gulp.watch(['keymap.c', 'config.h', 'rules.mk'], ['build']);
+    gulp.watch([
+        'keymap.c',
+        'config.h',
+        'rules.mk',
+    ], ['build']);
 });
+
+gulp.task('default', ['watch']);

keyboards/ergodox_ez/keymaps/hacker_dvorak/hacker_dvorak.c

@@ -0,0 +1,353 @@
+// Keyboard keymap:
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [DVORAK] = LAYOUT_ergodox(
+
+        // HACKER DVORAK left hand
+
+         //------------------------+-------------------------+-------------------------+-------------------------+-------------------------+-------------------------+------------------------//
+        //  ESCAPE                 |                         |                         |                         |                         |                         |     START RECORDING     //
+        //                         |                         |                         |                         |                         |                         |                         //
+                   KC_ESC,                 TD(GRV_TILD),             TD(AT_DLR),              TD(LCBR_LABK),            TD(LPRN_LBRC),            TD(EXLM_QUES),           DYN_REC_START1,     //
+        //                         |                       ~ |                       $ |                       < |                       [ |                       ? |                         //
+        //                         |            TAP DANCE: ` |            TAP DANCE: @              TAP DANCE: { |            TAP DANCE: ( |            TAP DANCE: ! |     DYNAMIC MARCO 1     //
+         //------------------------+-------------------------+-------------------------+-------------------------+-------------------------+-------------------------+------------------------//
+        //  TAB                    |      MOD TAP: ALT+SHIFT |       MOD TAP: CTRL+ALT |     MOD TAP: CTRL+SHIFT | P                       | Y                       |                         //
+        //                         |                         |                         |                         |                         |                         |                         //
+                   KC_TAB,                TD(NONE_LEAD),            TD(QUOT_DQUO),            TD(DOT_COMM),              ALL_T(KC_P),              MEH_T(KC_Y),            DYN_MACRO_PLAY1,    //
+        //                         |                    LEAD |                       " |                       , |                         |                         |                         //
+        //                         |         TAP DANCE: NONE |            TAP DANCE: ' |            TAP DANCE: . |          MOD TAP: HYPER |            MOD TAP: MEH |                         //
+         //------------------------+-------------------------+-------------------------+-------------------------+-------------------------+-------------------------|   PLAY DYNAMIC MACRO 1  //
+        //                         |            MOD TAP: ALT |           MOD TAP: CTRL |        LAYER TAP: SHIFT |   LAYER TAP: ARROW KEYS |            MOD TAP: GUI |                         //
+        //                         |                         |                         |                         |                       Ü |                         |                         //
+                TD(EQL_PLUS),              ALT_T(KC_A),              CTL_T(KC_O),              SFT_T(KC_E),           LT(ARROWS, KC_U),           LGUI_T(KC_I),      //-----------------------//
+        //                       + |                       Á |                       Ó |                       É |                       Ú |                       Í |                         //
+        //            TAP DANCE: = |            TAP DANCE: A |            TAP DANCE: O |            TAP DANCE: E |            TAP DANCE: U |            TAP DANCE: I |                         //
+         //------------------------+-------------------------+-------------------------+-------------------------+-------------------------+-------------------------|  META                   //
+        //          STOP RECORDING |  MOD TAP: GUI+SHIFT+ALT | Q                       | J                       | K                       | X                       |                         //
+        //                         |                         |                         |                         |                         |                         |                         //
+                DYN_REC_STOP,             TD(SCLN_COLN),            SGUI_T(KC_Q),          LT(MEDIA_FN, KC_J),        LT(NUMPAD, KC_K),           LCAG_T(KC_X),                KC_LGUI,        //
+        //                         |                       : |                         |                         |                         |                         |                         //
+        //           DYNAMIC MACRO |            TAP DANCE: ; |      MOD TAP: SHIFT+GUI | LAYER TAP: MEDIA/F-KEYS |   LAYER TAP: ATM NUMPAD |    MOD TAP: CTL+ALT+GUI |                         //
+         //------------------------+-------------------------+-------------------------+-------------------------+-------------------------+-------------------------+------------------------//
+        //         LAYERS SWITCHER | APPLICATION MENU        |                         |                         |                        //
+        //                         |                         |                         |                         |                  SCROLL //
+                 TG(LAYERS),                 KC_APP,                  KC_NLCK,                  KC_SLCK,                   KC_CAPS,        //
+        //                         |                         |                         |                         |                  NUM    //
+        //            LAYER TOGGLE |                         |                         |                         |       TAP DANCE: CAPS   //
+         //------------------------+-------------------------+-------------------------+-------------------------+------------------------//
+
+                                                                                                               // HACKER DVORAK left thumb
+
+                                                                                                                                           //------------------------+------------------------//
+                                                                                                                                          // MOUSE WHEEL LEFT        | MOUSE WHEEL RIGHT       //
+                                                                                                                                          //                         |                         //
+                                                                                                                                                     KC_WH_L,                  KC_WH_R,        //
+                                                                                                                                          //                         |                         //
+                                                                                                                                           //                        |                         //
+                                                                                                                //-------------------------+-------------------------+------------------------//
+                                                                                                               //                          |                         | HOME                    //
+                                                                                                               //                          |                         |                         //
+                                                                                                                /*  SPACE                   |  BACKSPACE             */         KC_HOME,        //
+                                                                                                               //                          |                         |                         //
+                                                                                                               //                          |                         |                         //
+                                                                                                                           KC_SPC,                   KC_BSPC,        //-----------------------//
+                                                                                                               //                          |                         | END                     //
+                                                                                                               //                          |                         |                         //
+                                                                                                               /*                          |                        */         KC_END,         //
+                                                                                                               //                          |                         |                         //
+                                                                                                               //                          |                         |                         //
+                                                                                                                //-------------------------+-------------------------+------------------------//
+
+        // HACKER DVORAK right hand
+
+         //------------------------+-------------------------+-------------------------+-------------------------+-------------------------+-------------------------+------------------------//
+        //                         |                         |                         |                         |                         |                         |                         //
+        //                         |                         |                         |                         |                         |                         |                         //
+                DYN_REC_START2,           TD(APMR_PIPE),            TD(RPRN_RBRC),            TD(RCBR_RABK),            TD(HASH_PERC),            TD(ASTR_CIRC),               XXXXXXX,        //
+        //                         |                         |                         |                         |                         |                         |                         //
+        //                         |                         |                         |                         |                         |                         |                         //
+         //------------------------+-------------------------+-------------------------+-------------------------+-------------------------+-------------------------+------------------------//
+        //                         |                         |                         |                         |                         |                         |                         //
+        //                         |                         |                         |                         |                         |                         |                         //
+                DYN_MACRO_PLAY2,           MEH_T(KC_F),               ALL_T(KC_G),            C_S_T(KC_C),                LCA_T(KC_R),             LAS_T(KC_L),             TD(SLSH_BSLS),     //
+        //                         |                         |                         |                         |                         |                         |                         //
+        //                         |                         |                         |                         |                         |                         |                         //
+        //                         |-------------------------+-------------------------+-------------------------+-------------------------+-------------------------+------------------------//
+        //                         |                         |                         |                         |                         |                         |                         //
+        //                         |                         |                         |                         |                         |                         |                         //
+        /*-----------------------*/        LGUI_T(KC_D),           LT(MOUSE, KC_H),            SFT_T(KC_T),             CTL_T(KC_N),               ALT_T(KC_S),             TD(MINS_UNDS),     //
+        //                         |                         |                         |                         |                         |                         |                         //
+        //                         |                         |                         |                         |                         |                         |                         //
+        //                         |-------------------------+-------------------------+-------------------------+-------------------------+-------------------------+------------------------//
+        //                         |                         |                         |                         |                         |                         |                         //
+        //                         |                         |                         |                         |                         |                         |                         //
+                   KC_LGUI,                LCAG_T(KC_B),           LT(HYPER, KC_M),         LT(MEDIA_FN, KC_W),          SGUI_T(KC_V),            LGAS_T(KC_Z),                COMPOSE,        //
+        //                         |                         |                         |                         |                         |                         |                         //
+        //                         |                         |                         |                         |                         |                         | ⎄                      //
+         //------------------------+-------------------------+-------------------------+-------------------------+-------------------------+-------------------------+------------------------//
+                                                             //                        |                         |                         |                         |                         //
+                                                            //                         |                         |                         |                         |                         //
+                                                                      KC_LEFT,                   KC_UP,                    KC_DOWN,                 KC_RGHT,                  KC_SYSREQ,       //
+                                                            //                         |                         |                         |                         |                         //
+                                                            //                         |                         |                         |                         |                         //
+                                                             //------------------------+-------------------------+-------------------------+-------------------------+------------------------//
+
+        // HACKER DVORAK right thumb
+
+         //------------------------+------------------------//
+        //                         |                         //
+        //                         |                         //
+                   KC_WH_U,                  KC_WH_D,        //
+        //                         |                         //
+        //                         |                         //
+         //------------------------+-------------------------+------------------------//
+        //                         |                         |                         //
+        //                         |                         |                         //
+                   KC_PGUP,        //                        |                         //
+        //                         |                         |                         //
+        //                         |                         |                         //
+         //------------------------|                         |                         //
+        //                         |                         |                         //
+        //                         |                         |                         //
+                  KC_PGDN,                   KC_DEL,                   KC_ENT          //
+        //                         |                         |                         //
+        //                         |                         |                         //
+         //------------------------+-------------------------+------------------------//
+
+    ),
+
+    [PLOVER] = LAYOUT_ergodox(
+        // left hand
+        XXXXXXX,    XXXXXXX,       KC_MS_BTN2, KC_MS_UP,   KC_MS_BTN1,  KC_MS_BTN3, GUI_T(KC_NO),
+        KC_ESC,     KC_MS_BTN4,    KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_BTN5, PV_NUM,
+        KC_TAB,     PV_LS,         PV_LT,      PV_LP,      PV_LH,       PV_STAR,
+        KC_CLCK,    PV_LS,         PV_LK,      PV_LW,      PV_LR,       PV_STAR,    PV_STAR,
+        XXXXXXX, TG(LAYERS), PV_NUM,     PV_NUM,     PV_NUM,
+
+        // left thumb
+              KC_SPACE, KC_BSPACE,
+                        KC_HOME,
+        PV_A, PV_O,     KC_END,
+
+        // right hand
+        KC_MS_ACCEL2, KC_MS_ACCEL1,  KC_MS_ACCEL0, KC_UP,   KC_APPLICATION, XXXXXXX,        KC_MS_WH_UP,
+        PV_NUM,       KC_MS_WH_LEFT, KC_LEFT,      KC_DOWN, KC_RIGHT,       KC_MS_WH_RIGHT, KC_MS_WH_DOWN,
+                      PV_STAR,       PV_RF,        PV_RP,   PV_RL,          PV_RT,          PV_RD,
+        PV_STAR,      PV_STAR,       PV_RR,        PV_RB,   PV_RG,          PV_RS,          PV_RZ,
+                                     PV_NUM,       PV_NUM,  PV_NUM,         PV_NUM,         XXXXXXX,
+
+        // right thumb
+        KC_DELETE, KC_ENTER,
+        KC_PGUP,
+        KC_PGDOWN, PV_E,     PV_U
+    ),
+
+    [GAMING] = LAYOUT_ergodox(
+        // left hand
+        KC_ESCAPE,            GUI_T(KC_MINS), KC_I,     KC_O,   KC_P,   ALGR_T(KC_EQL), KC_T,
+        KC_TAB,               KC_LALT,        KC_Q,     KC_W,   KC_E,   ALL_T(KC_R),    KC_G,
+        LT(MOUSE, KC_GRV), KC_LCTRL,       KC_A,     KC_S,   KC_D,   MEH_T(KC_F),
+        KC_BSLS,              KC_LSHIFT,      KC_Z,     KC_X,   KC_C,   SCMD_T(KC_V),   KC_M,
+        XXXXXXX,           TG(LAYERS),  KC_COMM, KC_DOT, KC_LBRC,
+
+        // left thumb
+                   MO(MEDIA_FN), KC_NLCK,
+                                 KC_SCLN,
+         KC_SPACE, KC_ENTER,     KC_BSPACE,
+
+        // right hand
+        KC_QUOT,       KC_Y,       KC_K,        KC_U,        KC_KP_7, KC_KP_8,  KC_KP_9,
+        KC_MS_WH_UP,   KC_H,       KC_J,        KC_L,        KC_KP_4, KC_KP_2,  KC_KP_6,
+                       KC_B,       KC_MS_UP,    KC_N,        KC_KP_1, KC_KP_5,  KC_KP_3,
+        KC_MS_WH_DOWN, KC_MS_LEFT, KC_MS_DOWN,  KC_MS_RIGHT, KC_UP,   KC_KP_0,  KC_SLASH,
+                                   KC_RBRC,     KC_LEFT,     KC_DOWN, KC_RIGHT, XXXXXXX,
+
+        // right thumb
+        KC_MS_BTN5, MO(HYPER),
+        KC_MS_BTN4,
+        KC_MS_BTN3, KC_MS_BTN2,   KC_MS_BTN1
+    ),
+
+    [ARROWS] = LAYOUT_ergodox(
+        // left hand
+        XXXXXXX, XXXXXXX,       XXXXXXX,      XXXXXXX,      XXXXXXX,    XXXXXXX, XXXXXXX,
+        XXXXXXX, SCMD_T(KC_NO), MEH_T(KC_NO), ALL_T(KC_NO), XXXXXXX,    XXXXXXX, XXXXXXX,
+        XXXXXXX, KC_LCTRL,      KC_LSHIFT,    XXXXXXX,      _______,    XXXXXXX,
+        XXXXXXX, KC_RALT,       KC_LALT,      GUI_T(KC_NO), XXXXXXX,    XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX,       XXXXXXX,      XXXXXXX,      XXXXXXX,
+
+        // left thumb
+                  XXXXXXX,   XXXXXXX,
+                             KC_HOME,
+        KC_SPACE, KC_BSPACE, KC_END,
+
+        // right hand
+        LGUI(KC_X), XXXXXXX,       LCTL(KC_X), KC_MS_WH_UP,   XXXXXXX,       XXXXXXX,        XXXXXXX,
+        LGUI(KC_C), XXXXXXX,       LCTL(KC_C), KC_UP,         SCTL(KC_C),    LCTL(KC_Z),     LGUI(KC_Z),
+                    KC_MS_WH_LEFT, KC_LEFT,    KC_DOWN,       KC_RIGHT,      KC_MS_WH_RIGHT, KC_APPLICATION,
+        LGUI(KC_V), XXXXXXX,       LCTL(KC_V), KC_MS_WH_DOWN, SCTL(KC_V),    LCTL(KC_Y),     SGUI(KC_Z),
+        XXXXXXX,    XXXXXXX,       XXXXXXX,    XXXXXXX,       KC_SLCK,
+
+        // right thumb
+        XXXXXXX,   XXXXXXX,
+        KC_PGUP,
+        KC_PGDOWN, KC_DELETE, KC_ENTER
+    ),
+
+    [MOUSE] = LAYOUT_ergodox(
+        // left hand
+        XXXXXXX,       XXXXXXX,       XXXXXXX,    KC_MS_WH_UP,   LCTL(KC_X),  XXXXXXX,        LGUI(KC_X),
+        LGUI(KC_Z),    LCTL(KC_Z),    SCTL(KC_C), KC_MS_UP,      LCTL(KC_C),  KC_MS_BTN4,     LGUI(KC_C),
+        KC_MS_BTN3,    KC_MS_WH_LEFT, KC_MS_LEFT, KC_MS_DOWN,    KC_MS_RIGHT, KC_MS_WH_RIGHT,
+        LGUI(KC_Z),    LCTL(KC_Y),    SCTL(KC_V), KC_MS_WH_DOWN, LCTL(KC_V),  KC_MS_BTN5,     LGUI(KC_V),
+        KC_SLCK,       XXXXXXX,       XXXXXXX,    XXXXXXX,       XXXXXXX,
+
+        // left thumb
+                    XXXXXXX,    XXXXXXX,
+                                XXXXXXX,
+        KC_MS_BTN1, KC_MS_BTN2, XXXXXXX,
+
+        // right hand
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,      XXXXXXX,      XXXXXXX,       XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX, ALL_T(KC_NO), MEH_T(KC_NO), SCMD_T(KC_NO), XXXXXXX,
+                 XXXXXXX, _______, KC_MS_ACCEL1, KC_LSHIFT,    KC_LCTRL,      KC_MS_ACCEL2,
+        XXXXXXX, XXXXXXX, XXXXXXX, GUI_T(KC_NO), KC_LALT,      KC_RALT,       XXXXXXX,
+                          XXXXXXX, XXXXXXX,      XXXXXXX,      XXXXXXX,       XXXXXXX,
+
+        // right thumb
+        XXXXXXX, XXXXXXX,
+        XXXXXXX,
+        XXXXXXX, XXXXXXX, KC_MS_ACCEL0
+    ),
+
+    [NUMPAD] = LAYOUT_ergodox(
+        // left hand
+        XXXXXXX, XXXXXXX,  XXXXXXX,      XXXXXXX, XXXXXXX,       XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX,  GUI_T(KC_NO), XXXXXXX, ALL_T(KC_NO),  XXXXXXX, XXXXXXX,
+        _______, KC_LCTRL, KC_LSHIFT,    _______, MEH_T(KC_NO),  XXXXXXX,
+        XXXXXXX, KC_RALT,  KC_LALT,      XXXXXXX, SCMD_T(KC_NO), XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX,  XXXXXXX,      XXXXXXX, XXXXXXX,
+
+        // left thumb
+                  XXXXXXX,   XXXXXXX,
+                             KC_HOME,
+        KC_SPACE, KC_BSPACE, KC_END,
+
+        // right hand
+        KC_X, KC_A, KC_B,   KC_C, KC_D,     KC_E,    KC_F,
+        KC_O, KC_I, KC_1,   KC_2, KC_3,     KC_SLSH, KC_PERC,
+              KC_M, KC_4,   KC_5, KC_6,     KC_PLUS, KC_MINS,
+        KC_L, KC_J, KC_7,   KC_8, KC_9,     KC_ASTR, KC_CIRC,
+                    KC_DOT, KC_0, KC_COMM, KC_UNDS,  KC_BSLS,
+
+        // right thumb
+        XXXXXXX,   XXXXXXX,
+        KC_PGUP,
+        KC_PGDOWN, KC_DELETE, KC_ENTER
+    ),
+
+    [LAYERS] = LAYOUT_ergodox(
+        // left hand
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+        XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX,
+
+        // left thumb
+                 XXXXXXX, XXXXXXX,
+                          XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX,
+
+        // right hand
+        XXXXXXX, XXXXXXX, XXXXXXX,       XXXXXXX,       XXXXXXX,       XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX,       XXXXXXX,       XXXXXXX,       XXXXXXX, XXXXXXX,
+                 XXXXXXX, TO(DVORAK), TO(PLOVER), TO(GAMING), XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX,       XXXXXXX,       XXXXXXX,       XXXXXXX, XXXXXXX,
+                          XXXXXXX,       XXXXXXX,       XXXXXXX,       XXXXXXX, XXXXXXX,
+
+        // right thumb
+        XXXXXXX, XXXXXXX,
+        XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX
+    ),
+
+    [MEDIA_FN] = LAYOUT_ergodox(
+        // left hand
+        KC_VOLD,   KC_MUTE, RGB_TOG,    XXXXXXX, KC_MAIL,      KC_FIND, KC_WWW_REFRESH,
+        KC_MPRV, KC_F9,         KC_F7,      KC_F5,   KC_F3,        KC_F1,   KC_WWW_HOME,
+        KC_PAUS,            KC_F19,        KC_F17,     KC_F15,  KC_F13,       KC_F11,
+        RGB_HUD,             XXXXXXX,       XXXXXXX,    _______, KC_F23,       KC_F21,  KC_WWW_BACK,
+        RGB_VAD,             KC_CLCK,       KC_PSCREEN, XXXXXXX, MO(FIRMWARE),
+
+        // left thumb
+                 _______, XXXXXXX,
+                          XXXXXXX,
+        XXXXXXX, XXXXXXX, KC_MEDIA_EJECT,
+
+        // right hand
+        KC_WWW_FAVORITES, KC_MYCM, KC_CALC,   XXXXXXX, RGB_MOD,         RGB_M_P,        KC_VOLU,
+        KC_WWW_SEARCH,    KC_F2,          KC_F4,           KC_F6,   KC_F8,           KC_F10,         KC_MNXT,
+                          KC_F12,         KC_F14,          KC_F16,  KC_F18,          KC_F20,         KC_MPLY,
+        KC_WWW_FORWARD,   KC_F22,         KC_F24,          _______, XXXXXXX,         XXXXXXX,        RGB_HUI,
+                                          KC_PWR, XXXXXXX, KC_SLEP, KC_WAKE, RGB_VAI,
+
+        // right thumb
+        XXXXXXX,   XXXXXXX,
+        XXXXXXX,
+        RGB_GREEN, XXXXXXX, XXXXXXX
+    ),
+
+    [HYPER] = LAYOUT_ergodox(
+        // left hand
+        XXXXXXX, HYPR(KC_F1),  HYPR(KC_F2),  HYPR(KC_F3),  HYPR(KC_F4),  HYPR(KC_F5),  XXXXXXX,
+        XXXXXXX, HYPR(KC_F6),  HYPR(KC_F7),  HYPR(KC_F8),  HYPR(KC_F9),  HYPR(KC_F10), XXXXXXX,
+        XXXXXXX, HYPR(KC_F11), HYPR(KC_F12), HYPR(KC_F13), HYPR(KC_F14), HYPR(KC_F15),
+        XXXXXXX, HYPR(KC_F16), HYPR(KC_F17), HYPR(KC_F18), HYPR(KC_F19), HYPR(KC_F20), XXXXXXX,
+        XXXXXXX, HYPR(KC_F21), HYPR(KC_F22), HYPR(KC_F23), HYPR(KC_F24),
+
+        // left thumb
+                 XXXXXXX, XXXXXXX,
+                          XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX,
+
+        // right hand
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+                 XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+                 XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+
+        // right thumb
+        XXXXXXX, _______,
+        XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX
+    ),
+
+    [FIRMWARE] = LAYOUT_ergodox(
+
+        // left hand
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
+
+        // left thumb
+               XXXXXXX, XXXXXXX,
+                        XXXXXXX,
+        RESET, XXXXXXX, XXXXXXX,
+
+        // right hand
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+                 XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+                          XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+
+        // right thumb
+        XXXXXXX, XXXXXXX,
+        XXXXXXX,
+        XXXXXXX, XXXXXXX, EEP_RST
+    )
+};

keyboards/ergodox_ez/keymaps/hacker_dvorak/keycodes/aliases_definitions.c

@@ -0,0 +1,5 @@
+// Keycode aliases
+#define SCTL(kc)   LSFT(LCTL(kc))  // Modifier keys: SHIFT+CTRL+kc combination.
+#define LGAS_T(kc) MT(MOD_LGUI | MOD_LALT | MOD_LSFT, kc)  // Mod tap: kc when tapped, GUI+ALT+SHIFT when held.
+#define LAS_T(kc)  MT(MOD_LALT | MOD_LSFT, kc)  // Mod tap: kc when tapped, ALT+SHIFT whin held.
+#define COMPOSE    KC_RALT  // Compose key (used to input characters like á, ñ, ü).