modify quantum/template/avr/config.h: add rgblight effect configurations

* Fix up screen off timer of helix

* Fix Up ScreenOffInterval exceeded uint16_t

* Fix Up never waking up once screen off if in case of matrix are not dirty

* Changing referenIng incorrect constant name

* OLED_ENABLED => SSD1306OLED

* Improve internal processing of process_record_kb()

* Use the return value of process_record_gfx()

* Move a include statement into #ifdef block

Move   #include "ssd1306.h` statement into #ifdef block

* Move process_record_kbI()

Move process_record_kb() from helix.c to rev1.c/rev2.c/pico.c

* Move process_record_kb()

docs/faq_build.md

@@ -126,5 +126,5 @@ For now, you need to rollback avr-gcc to 7 in brew.
 ```
 brew uninstall --force avr-gcc
 brew install avr-gcc@7
-brew link avr-gcc@7
+brew link --force avr-gcc@7
 ```

docs/getting_started_build_tools.md

@@ -57,6 +57,7 @@ If you're using [homebrew,](http://brew.sh/) you can use the following commands:
     brew tap PX4/homebrew-px4
     brew update
     brew install avr-gcc@7
+    brew link --force avr-gcc@7
     brew install dfu-programmer
     brew install dfu-util
     brew install gcc-arm-none-eabi

keyboards/40percentclub/25/25.c

@@ -0,0 +1,60 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "25.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+	{{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}},
+	{{4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}},
+	{{4, 7}, {3, 7}, {2, 7}, {1, 7}, {0, 7}},
+	{{4, 8}, {3, 8}, {2, 8}, {1, 8}, {0, 8}},
+	{{4, 9}, {3, 9}, {2, 9}, {1, 9}, {0, 9}},
+
+	{{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}},
+  {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}},
+  {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}},
+	{{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}},
+	{{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}},
+};
+#endif

keyboards/40percentclub/25/25.h

@@ -0,0 +1,85 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#define ___ KC_NO
+
+#ifndef FLIP_HALF
+#define LAYOUT_ortho_5x10( \
+	L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \
+	L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \
+	L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \
+	L30, L31, L32, L33, L34, R30, R31, R32, R33, R34, \
+	L40, L41, L42, L43, L44, R40, R41, R42, R43, R44  \
+) { \
+	{ L00, L01, L02, L03, L04 }, \
+	{ L10, L11, L12, L13, L14 }, \
+	{ L20, L21, L22, L23, L24 }, \
+	{ L30, L31, L32, L33, L34 }, \
+	{ L40, L41, L42, L43, L44 }, \
+	{ R04, R03, R02, R01, R00 }, \
+	{ R14, R13, R12, R11, R10 }, \
+	{ R24, R23, R22, R21, R20 }, \
+	{ R34, R33, R32, R31, R30 }, \
+	{ R44, R43, R42, R41, R40 }  \
+}
+#else
+#define LAYOUT_ortho_5x10( \
+	L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \
+	L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \
+	L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \
+	L30, L31, L32, L33, L34, R30, R31, R32, R33, R34, \
+	L40, L41, L42, L43, L44, R40, R41, R42, R43, R44  \
+) { \
+	{ L00, L01, L02, L03, L04 }, \
+	{ L10, L11, L12, L13, L14 }, \
+	{ L20, L21, L22, L23, L24 }, \
+	{ L30, L31, L32, L33, L34 }, \
+	{ L40, L41, L42, L43, L44 }, \
+	{ R00, R01, R02, R03, R04 }, \
+	{ R10, R11, R12, R13, R14 }, \
+	{ R20, R21, R22, R23, R24 }, \
+	{ R30, R31, R32, R33, R34 }, \
+	{ R40, R41, R42, R43, R44 }  \
+}
+#endif
+
+#define LAYOUT_ortho_5x5( \
+	L00, L01, L02, L03, L04, \
+	L10, L11, L12, L13, L14, \
+	L20, L21, L22, L23, L24, \
+	L30, L31, L32, L33, L34, \
+	L40, L41, L42, L43, L44  \
+) { \
+	{ L00, L01, L02, L03, L04 }, \
+	{ L10, L11, L12, L13, L14 }, \
+	{ L20, L21, L22, L23, L24 }, \
+	{ L30, L31, L32, L33, L34 }, \
+	{ L40, L41, L42, L43, L44 }, \
+	{ ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }, \
+  { ___, ___, ___, ___, ___ }  \
+}
+
+#define LAYOUT_macro LAYOUT_ortho_5x5
+#define LAYOUT_split LAYOUT_ortho_5x10
+
+#ifdef USE_I2C
+  #error "I2C not Supported"
+#endif

keyboards/40percentclub/25/config.h

@@ -0,0 +1,230 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0A0C
+#define DEVICE_VER      0x0F25
+#define MANUFACTURER    di0ib
+#define PRODUCT         The 5x5 Keyboard
+#define DESCRIPTION     A split 50 key keyboard
+
+#define USE_SERIAL
+
+/* Select hand configuration */
+#define MASTER_LEFT
+//#define MASTER_RIGHT
+//#define EE_HANDS
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 5*2
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/

keyboards/40percentclub/25/info.json

@@ -0,0 +1,29 @@
+{
+    "keyboard_name": "foobar",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 6,
+    "height": 2,
+    "layouts": {
+        "LAYOUT_macro": {
+            "key_count": 15,
+            "layout": [
+              {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0},
+              {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1},
+              {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2},
+              {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3},
+              {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}
+          ]
+        },
+        "LAYOUT_split": {
+            "key_count": 30,
+            "layout": [
+              {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0},
+              {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1},
+              {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2},
+              {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3},
+              {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}
+          ]
+        }
+    }
+}

keyboards/40percentclub/25/keymaps/default/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/40percentclub/25/keymaps/default/keymap.c

@@ -0,0 +1,87 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _LOWER  1
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Qwerty
+   * ,---------------------------------------------------------------------.
+   * |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  |
+   * |------+------+------+------+------+------+------+------+------+------|
+   * |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  |
+   * |------+------+------+------+-------------+------+------+------+------|
+   * |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  | Bksp |
+   * |------+------+------+------+------|------+------+------+------+------|
+   * |   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |Enter |
+   * |------+------+------+------+------+------+------+------+------+------|
+   * | Ctrl | GUI  | Alt  |Lower |Space | Shift| Left | Down |  Up  |Right |
+   * `---------------------------------------------------------------------'
+   */
+  [_QWERTY] = LAYOUT_split(
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    \
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    \
+    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_BSPC, \
+    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_ENT,  \
+    KC_LCTL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_LSFT, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+  ),
+
+  /* Lower
+   * ,---------------------------------------------------------------------.
+   * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  `   |   /  |   _  |   +  |
+   * |------+------+------+------+------|------+------+------+------+------|
+   * |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |  ~   |   [  |   ]  |  \   |
+   * |------+------+------+------+-------------+------+------+------+------|
+   * | Esc  |      |      |      |      |      |      |   ;  |  "   |  Del |
+   * |------+------+------+------+------|------+------+------+------+------|
+   * | Tab  |      |      |      |      |      |      |      |      |      |
+   * |------+------+------+------+------+------+------+------+------+------|
+   * |      |      |      |      |      |      | Home | PgDn | PgUp | End  |
+   * `---------------------------------------------------------------------'
+   */
+  [_LOWER] = LAYOUT_split( \
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_GRV, KC_SLSH, KC_UNDS, KC_PLUS, \
+    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TILD, KC_LBRC, KC_RBRC, KC_PIPE, \
+    KC_ESC,  _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_DEL,  \
+    KC_TAB,  _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/40percentclub/25/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default split keymap for 25

keyboards/40percentclub/25/keymaps/macro/config.h

@@ -0,0 +1,19 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here

keyboards/40percentclub/25/keymaps/macro/keymap.c

@@ -0,0 +1,42 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_macro(
+    KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,  \
+    KC_GRV,   KC_Q,    KC_W,    KC_E,    KC_R,  \
+    KC_TAB,   KC_A,    KC_S,    KC_D,    KC_F,  \
+    KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,  \
+    KC_LCTL,  KC_LGUI, KC_LALT, KC_SPC,  KC_SPC \
+  ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/40percentclub/25/keymaps/macro/readme.md

@@ -0,0 +1 @@
+# The default macro keymap for 25

keyboards/40percentclub/25/readme.md

@@ -0,0 +1,18 @@
+# 25
+
+![25](https://2.bp.blogspot.com/-lBK_ZlB3a9Q/WcAM0B_vwdI/AAAAAAACDgs/qnI9YB53pzck4Bw0v5QRvypDMs80CxWVQCLcBGAs/s640/IMG_0695.JPG)
+===
+
+Split 50 key keyboard - it is the largest keybad that fits within the 100mm x 100mm PCB size. Can be used together as a split keyboard or as a single 25 key macropad.
+
+* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/25)
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: 25 PCB  
+Hardware Availability: [25 project on 40% Keyboards](http://www.40percent.club/2017/09/25.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 40percentclub/25:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/25/rules.mk

@@ -0,0 +1,85 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs (+400)
+
+# Enable generic behavior for split boards
+SPLIT_KEYBOARD = yes
+
+LAYOUTS = ortho_5x5 ortho_5x10

keyboards/40percentclub/4x4/4x4.h

@@ -1,6 +1,4 @@
-
+#pragma once
-#ifndef FOURX4_H
-#define FOURX4_H
 
 #include "quantum.h"
 #define ___ KC_NO
@@ -58,5 +56,3 @@
     { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K2d, K2e, K2f }, \
     { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e, K3f } \
 }
-
-#endif

keyboards/40percentclub/4x4/keymaps/default/keymap.c

@@ -6,9 +6,6 @@
 #define NUM 2
 #define DIR 3
 
-// Readability keycodes
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Single 4x4 board only
@@ -65,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [NUM] = LAYOUT_ortho_4x16(
   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, _______,
   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     _______, _______, _______, KC_PPLS, _______,
-  _______, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT, _______,
+  _______, KC_F11,  KC_F12,  _______, _______, _______, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT, _______,
   _______, _______, _______, _______, _______, _______, KC_ENT,  KC_RSFT, _______, _______, _______,  _______, _______, _______, _______, _______
   ),
 
@@ -90,23 +87,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-    (void)event;
-
-  switch (id) {
-
-  }
-  return MACRO_NONE;
-}
-
-
 void matrix_init_user(void) {
 
 }

keyboards/40percentclub/4x4/rules.mk

@@ -36,24 +36,30 @@ F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
-# Bootloader
+# Bootloader selection
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#   Teensy       halfkay
-#     different sizes, comment this out, and the correct address will be loaded
+#   Pro Micro    caterina
-#     automatically (+60). See bootloader.mk for all options.
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
 BOOTLOADER = caterina
 
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = yes        # Console for debug(+400)
@@ -68,7 +74,7 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs (+400)
 
 #FIXME: Community keymap build are currently failing due to missing functionality
 #LAYOUTS = ortho_4x4  ortho_4x8  ortho_4x12  ortho_4x16

keyboards/40percentclub/5x5/5x5.h

@@ -1,6 +1,4 @@
-
+#pragma once
-#ifndef FIVEX5_H
-#define FIVEX5_H
 
 #include "quantum.h"
 #define ___ KC_NO
@@ -53,5 +51,3 @@
     { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, K3d, K3e}, \
     { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, K4d, K4e} \
 }
-
-#endif

keyboards/40percentclub/5x5/keymaps/default/keymap.c

@@ -6,9 +6,6 @@
 #define NUM 2
 #define DIR 3
 
-// Readability keycodes
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Single 5x5 board only
@@ -74,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______,
   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
   KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,     _______, _______, _______, KC_PPLS,
-  _______, KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT,
+  _______, KC_F11,  KC_F12,  _______, _______, _______, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC), _______, _______, _______, KC_PENT,
   _______, _______, _______, _______, _______, _______, KC_ENT,  KC_RSFT, _______, _______, _______,  _______, _______, _______, _______
   ),
 
@@ -102,25 +99,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-const uint16_t PROGMEM fn_actions[] = {
-
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
 
 void matrix_init_user(void) {
 

keyboards/40percentclub/5x5/rules.mk

@@ -36,24 +36,31 @@ F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-# Boot Section Size in *bytes*
+
-#   Teensy halfKay   512
+# Bootloader selection
-#   Teensy++ halfKay 1024
+#   Teensy       halfkay
-#   Atmel DFU loader 4096
+#   Pro Micro    caterina
-#   LUFA bootloader  4096
+#   Atmel DFU    atmel-dfu
-#   USBaspLoader     2048
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
 # OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
 
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = yes        # Console for debug(+400)
@@ -68,7 +75,7 @@ UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+HD44780_ENABLE = no 				# Enable support for HD44780 based LCDs (+400)
 
 #FIXME: Community keymap build are currently failing due to missing functionality
 #LAYOUTS = ortho_5x5  ortho_5x10  ortho_5x15

keyboards/40percentclub/6lit/6lit.h

@@ -16,10 +16,10 @@
 #pragma once
 
 #include "quantum.h"
-#define ________ KC_NO
+#define ___ KC_NO
 
 #ifndef FLIP_HALF
-#define LAYOUT_split( \
+#define LAYOUT_ortho_2x6( \
 	L00, L01, L02, R00, R01, R02, \
 	L10, L11, L12, R10, R11, R12  \
 ) { \
@@ -29,7 +29,7 @@
 	{ R12, R11, R10 }, \
 }
 #else
-#define LAYOUT_split( \
+#define LAYOUT_ortho_2x6( \
 	L00, L01, L02, R00, R01, R02, \
 	L10, L11, L12, R10, R11, R12  \
 ) { \
@@ -40,15 +40,18 @@
 }
 #endif
 
-#define LAYOUT_macro( \
+#define LAYOUT_ortho_2x3( \
 	L00, L01, L02, \
 	L10, L11, L12  \
 ) { \
 	{ L00, L01, L02 }, \
 	{ L10, L11, L12 }, \
+	{ ___, ___, ___ }, \
+  { ___, ___, ___ }, \
 }
 
-#define LAYOUT LAYOUT_macro
+#define LAYOUT_macro LAYOUT_ortho_2x3
+#define LAYOUT_split LAYOUT_ortho_2x6
 
 #ifdef USE_I2C
   #error "I2C not Supported"

keyboards/40percentclub/foobar/foobar.h

@@ -19,7 +19,7 @@
 #define ___ KC_NO
 
 #ifndef FLIP_HALF
-#define LAYOUT_split( \
+#define LAYOUT_ortho_3x10( \
 	L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \
 	L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \
 	L20, L21, L22, L23, L24, R20, R21, R22, R23, R24  \
@@ -32,7 +32,7 @@
 	{ R24, R23, R22, R21, R20 }  \
 }
 #else
-#define LAYOUT_split( \
+#define LAYOUT_ortho_3x10( \
 	L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \
 	L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \
 	L20, L21, L22, L23, L24, R20, R21, R22, R23, R24  \
@@ -46,7 +46,7 @@
 }
 #endif
 
-#define LAYOUT_macro( \
+#define LAYOUT_ortho_3x5( \
 	L00, L01, L02, L03, L04, \
   L10, L11, L12, L13, L14, \
   L20, L21, L22, L23, L24  \
@@ -59,7 +59,8 @@
   { ___, ___, ___, ___, ___ }  \
 }
 
-#define LAYOUT LAYOUT_macro
+#define LAYOUT_macro LAYOUT_ortho_3x5
+#define LAYOUT_split LAYOUT_ortho_3x10
 
 #ifdef USE_I2C
   #error "I2C not Supported"

keyboards/40percentclub/foobar/keymaps/default/keymap.c

@@ -15,7 +15,6 @@
  */
 #include QMK_KEYBOARD_H
 
-#define _______ KC_TRNS
 #define FN1_Q LT(1, KC_Q)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/foobar/rules.mk

@@ -81,3 +81,5 @@ HD44780_ENABLE = no 		    # Enable support for HD44780 based LCDs (+400)
 
 # Enable generic behavior for split boards
 SPLIT_KEYBOARD = yes
+
+LAYOUTS = ortho_3x10

keyboards/40percentclub/gherkin/config.h

@@ -1,5 +1,4 @@
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -50,5 +49,3 @@
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 #endif
-
-#endif

keyboards/40percentclub/gherkin/gherkin.h

@@ -1,5 +1,4 @@
-#ifndef GHERKIN_H
+#pragma once
-#define GHERKIN_H
 
 #include "quantum.h"
 
@@ -14,5 +13,3 @@
 	{ K30,   K31,   K32,   K33,   K34,   K35 }, \
 	{ K40,   K41,   K42,   K43,   K44,   K45 }  \
 }
-
-#endif

keyboards/40percentclub/gherkin/keymaps/bbaserdem/config.h

@@ -1,7 +1,5 @@
-#ifndef CONFIG_KEYMAP_H
+#pragma once
-#define CONFIG_KEYMAP_H
 
-#include "../../config.h"
 #define RGB_DI_PIN F6
 #define RGBLED_NUM 10
 #define RGBLIGHT_ANIMATIONS
@@ -9,5 +7,3 @@
 #undef BACKLIGHT_LEVELS
 #endif
 #define BACKLIGHT_LEVELS 3
-
-#endif

keyboards/40percentclub/gherkin/keymaps/bbaserdem/rules.mk

@@ -1,7 +1,3 @@
-ifndef QUANTUM_DIR
-  include ../../../../Makefile
-endif
-
 USER_NAME := bbaserdem-nouserspace
 
 STENO_ENABLE = no      # Additional protocols for Stenography(+1700), requires VIRTSER

keyboards/40percentclub/gherkin/keymaps/default/keymap.c

@@ -1,6 +1,5 @@
 #include QMK_KEYBOARD_H
 
-#define _______ KC_TRNS
 #define FN1_Q LT(1, KC_Q)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -19,16 +18,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-    (void)event;
-
-  switch (id) {
-
-  }
-  return MACRO_NONE;
-}
-
 void matrix_init_user(void) {
 }
 

keyboards/40percentclub/gherkin/keymaps/itsaferbie/config.h

@@ -1,7 +1,4 @@
-#ifndef CONFIG_USER_H
+#pragma once
-#define CONFIG_USER_H
-
-#include "../../config.h"
 
 #undef RGB_DI_PIN
 #undef RGBLED_NUM
@@ -11,5 +8,3 @@
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
-
-#endif

keyboards/40percentclub/gherkin/keymaps/itsaferbie/keymap.c

@@ -12,10 +12,9 @@ enum custom_keycodes {
   PS = SAFE_RANGE,
   AI,
   PR,
+  MACRO_0,
 };
 
-#define _______ KC_TRNS
-
 #define PS TO(0)
 #define AI TO(1)
 #define PR TO(2)
@@ -72,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   // Illustrator layer
   [_AI] = LAYOUT_ortho_3x10(
-    _______, M(0),    RULER,   _______, KC_G,    _______, _______, KC_Q,  KC_MINS, KC_PLUS,
+    _______, MACRO_0, RULER,   _______, KC_G,    _______, _______, KC_Q,  KC_MINS, KC_PLUS,
     _______, _______, _______, KC_E,    _______, _______, _______, SHAPE, KC_O,    OPEN,
     _______, _______, _______, _______, _______, _______, _______, KC_M,  KC_SLSH, PR
   ),
@@ -133,20 +132,14 @@ void matrix_scan_user(void) {
   #endif
 }
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-    (void)event;
-
-  switch (id) {
-    case 0:
-      // Save for Web Macro.
-      return MACRO(D(LSFT), D(LALT), D(LCTL), T(S), U(LCTL), U(LALT), U(LSFT), END);
-  }
-  return MACRO_NONE;
-}
-
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  switch (keycode) {
+	if (record->event.pressed) {
-  }
+		switch(keycode) {
-  return true;
+			case MACRO_0:
-}
+        // Save for Web Macro.
+				SEND_STRING(SS_LSFT(SS_LALT(SS_LCTRL("s"))));
+				return false;
+		}
+	}
+	return true;
+};

keyboards/40percentclub/gherkin/keymaps/itsaferbie/rules.mk

@@ -1,7 +1,3 @@
 BACKLIGHT_ENABLE = yes
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/40percentclub/gherkin/keymaps/mjt/config.h

@@ -1,169 +1,7 @@
-/*
+#pragma once
-Copyright 2012 Jun Wako <[email protected]>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID    0xFEED
+#undef MANUFACTURER
-#define PRODUCT_ID   0x6060
+#undef DESCRIPTION
-#define DEVICE_VER   0x0001
 #define MANUFACTURER    Some Guy
-#define PRODUCT         Gherkin
 #define DESCRIPTION     30 percent disaster
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 6
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-
-// These are with USB on the left.
-// #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 }
-// original from TMK:  #define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B4 }
-// #define MATRIX_COL_PINS { D0, D4, F6, D7, E6, B4 }
-
-// these are with USB on the right.
-#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 }
-
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-#define BACKLIGHT_PIN B5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-#define AUDIO_VOICES
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1     H
-//#define MAGIC_KEY_HELP2     SLASH
-//#define MAGIC_KEY_DEBUG     D
-//#define MAGIC_KEY_DEBUG_MATRIX  X
-//#define MAGIC_KEY_DEBUG_KBD   K
-//#define MAGIC_KEY_DEBUG_MOUSE  M
-//#define MAGIC_KEY_VERSION    V
-//#define MAGIC_KEY_STATUS     S
-//#define MAGIC_KEY_CONSOLE    C
-//#define MAGIC_KEY_LAYER0_ALT1  ESC
-//#define MAGIC_KEY_LAYER0_ALT2  GRAVE
-//#define MAGIC_KEY_LAYER0     0
-//#define MAGIC_KEY_LAYER1     1
-//#define MAGIC_KEY_LAYER2     2
-//#define MAGIC_KEY_LAYER3     3
-//#define MAGIC_KEY_LAYER4     4
-//#define MAGIC_KEY_LAYER5     5
-//#define MAGIC_KEY_LAYER6     6
-//#define MAGIC_KEY_LAYER7     7
-//#define MAGIC_KEY_LAYER8     8
-//#define MAGIC_KEY_LAYER9     9
-//#define MAGIC_KEY_BOOTLOADER   PAUSE
-//#define MAGIC_KEY_LOCK      CAPS
-//#define MAGIC_KEY_EEPROM     E
-//#define MAGIC_KEY_NKRO      N
-//#define MAGIC_KEY_SLEEP_LED   Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif

keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c

@@ -12,7 +12,6 @@ enum {
   TD_C_LALT = 2,
   TD_A_TAB = 3,
   TD_Q_ESC = 4,
-//   M(0)
 };
 
 //Friendly Layer Names
@@ -37,10 +36,6 @@ enum gherkin_keycodes {
   EXT_PLV
 };
 
-// Fillers to make layering more clear
-#define _______ KC_TRNS
-#define XXXXXXX KC_NO
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_QWERTY] = LAYOUT_ortho_3x10(
     TD(TD_Q_ESC),   KC_W,               KC_E,           KC_R,  KC_T,               KC_Y,   KC_U,  KC_I,     KC_O,    KC_P,
@@ -171,30 +166,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     return true;
 }
 
-
-/*
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-
-  switch (id) {
-        case 0: {
-            if (record->event.pressed) {
-                key_timer = timer_read(); // if the key is being pressed, we start the timer.
-            }
-            else { // this means the key was just released, so we can figure out how long it was pressed for (tap or "held down").
-                if (timer_elapsed(key_timer) > 150) { // 150 being 150ms, the threshhold we pick for counting something as a tap.
-                    return MACRO( D(LSFT), END  );
-                }
-                else {
-                    return MACRO( T(N), END  );
-                }
-            }
-            break;
-        }
-      }
-  return MACRO_NONE;
-}*/
-
 void matrix_init_user(void) {
     #ifdef AUDIO_ENABLE
         startup_user();

keyboards/40percentclub/gherkin/keymaps/mjt/rules.mk

@@ -1,29 +1,2 @@
-## not sure where this stuff goes ##
+AUDIO_ENABLE = yes          # Audio output on port C6
-MCU = atmega32u4
+TAP_DANCE_ENABLE = yes
-F_CPU = 16000000
-ARCH = AVR8
-F_USB = $(F_CPU)
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
-#
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = yes           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-TAP_DANCE_ENABLE=yes
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/40percentclub/gherkin/keymaps/steno/config.h

@@ -1,12 +1,7 @@
-#ifndef CONFIG_USER_H
+#pragma once
-#define CONFIG_USER_H
-
-#include "../../config.h"
 
 #define NO_ACTION_LAYER
 #define NO_ACTION_TAPPING
 #define NO_ACTION_ONESHOT
 #define NO_ACTION_MACRO
 #define NO_ACTION_FUNCTION
-
-#endif

keyboards/40percentclub/gherkin/keymaps/steno/rules.mk

@@ -1,8 +1,4 @@
-ifndef QUANTUM_DIR
+STENO_ENABLE = yes     # Additional protocols for Stenography(+1700), requires VIRTSER
-  include ../../../../Makefile
-endif
-
-STENO_ENABLE = yes          # Additional protocols for Stenography(+1700), requires VIRTSER
 
 BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = no   # Mouse keys(+4700)
@@ -13,4 +9,4 @@ SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = no       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = no

keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/config.h

@@ -1,6 +1,3 @@
-#ifndef CONFIG_USER_H
+#pragma once
-#define CONFIG_USER_H
 
-#include "../../config.h"
+// place overrides here
-
-#endif

keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/keymap.c

@@ -4,8 +4,6 @@
 #define ST_BOLT QK_STENO_BOLT
 #define ST_GEM  QK_STENO_GEMINI
 
-#define XXXXXXX KC_NO
-
 enum keyboard_layers {
   _QWERTY,
   _RAISE,

keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/rules.mk

@@ -1,6 +1,2 @@
-ifndef QUANTUM_DIR
-  include ../../../../Makefile
-endif
-
 MOUSEKEY_ENABLE = no        # Mouse keys(+4700)
 STENO_ENABLE = yes          # Additional protocols for Stenography(+1700), requires VIRTSER

keyboards/40percentclub/gherkin/rules.mk

@@ -33,25 +33,40 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
-
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
 # Build Options
 #   comment out to disable the options.
 #
 BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+MOUSEKEY_ENABLE = yes	  # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes	  # Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
+CONSOLE_ENABLE = no	    # Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
+COMMAND_ENABLE = no     # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = no

keyboards/40percentclub/luddite/rules.mk

@@ -33,25 +33,40 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
-
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
 # Build Options
 #   comment out to disable the options.
 #
 BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+MOUSEKEY_ENABLE = yes	  # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes	  # Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
+CONSOLE_ENABLE = no			# Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
+COMMAND_ENABLE = no     # Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no   # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes				# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes

keyboards/40percentclub/mf68/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -158,5 +157,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-
-#endif

keyboards/40percentclub/mf68/keymaps/default/keymap.c

@@ -51,18 +51,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-'   `left+down+rght' */
   )
 };
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};

keyboards/40percentclub/mf68/keymaps/factory/keymap.c

@@ -57,18 +57,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-'   `left+down+rght' */
   )
 };
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};

keyboards/40percentclub/mf68/mf68.h

@@ -1,5 +1,4 @@
-#ifndef MF68_H
+#pragma once
-#define MF68_H
 
 #include "quantum.h"
 
@@ -36,5 +35,3 @@
     KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, KC_##K68, \
     KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74 \
 )
-
-#endif

keyboards/40percentclub/mf68/rules.mk

@@ -1,4 +1,3 @@
-
 # MCU name
 MCU = atmega32u4
 
@@ -15,7 +14,6 @@ MCU = atmega32u4
 #     software delays.
 F_CPU = 16000000
 
-
 #
 # LUFA specific
 #
@@ -39,30 +37,42 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 
-# Boot Section Size in *bytes*
+# Bootloader selection
-#   Teensy halfKay   512
+#   Teensy       halfkay
-#   Teensy++ halfKay 1024
+#   Pro Micro    caterina
-#   Atmel DFU loader 4096
+#   Atmel DFU    atmel-dfu
-#   LUFA bootloader  4096
+#   LUFA DFU     lufa-dfu
-#   USBaspLoader     2048
+#   QMK DFU      qmk-dfu
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
 
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
+NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
+MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
+UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+AUDIO_ENABLE = no           # Audio output on port C6
 
-LAYOUTS = 68_ansi
+LAYOUTS = 68_ansi

keyboards/40percentclub/mf68_ble/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -158,5 +157,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-
-#endif

keyboards/40percentclub/mf68_ble/keymaps/default/keymap.c

@@ -51,18 +51,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  /*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-'   `left+down+rght' */
   )
 };
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};

keyboards/40percentclub/mf68_ble/mf68_ble.h

@@ -1,5 +1,4 @@
-#ifndef MF68_BLE_H
+#pragma once
-#define MF68_BLE_H
 
 #include "quantum.h"
 
@@ -36,5 +35,3 @@
     KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67, KC_##K68, \
     KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74 \
 )
-
-#endif

keyboards/40percentclub/mf68_ble/rules.mk

@@ -1,4 +1,3 @@
-
 # MCU name
 MCU = atmega32u4
 
@@ -39,29 +38,42 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 
-# Boot Section Size in *bytes*
+# Bootloader selection
-#   Teensy halfKay   512
+#   Teensy       halfkay
-#   Teensy++ halfKay 1024
+#   Pro Micro    caterina
-#   Atmel DFU loader 4096
+#   Atmel DFU    atmel-dfu
-#   LUFA bootloader  4096
+#   LUFA DFU     lufa-dfu
-#   USBaspLoader     2048
+#   QMK DFU      qmk-dfu
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
 
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
-COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
+NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE ?= no      # Enable keyboard backlight functionality on B7 by default
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE ?= no            # MIDI controls
+MIDI_ENABLE = no            # MIDI controls
-UNICODE_ENABLE ?= no         # Unicode
+UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE ?= no           # Audio output on port C6
+AUDIO_ENABLE = no           # Audio output on port C6
-BLUETOOTH = AdafruitBLE
+
+BLUETOOTH = AdafruitBLE

keyboards/40percentclub/nano/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -41,5 +40,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 
 #define TAPPING_TERM 200
-
-#endif

keyboards/40percentclub/nano/keymaps/default/keymap.c

@@ -3,7 +3,6 @@
 #define _MAIN 0
 #define _FN 1
 
-#define _______ KC_TRNS
 #define KC_X0 LT(_FN, KC_ESC)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

keyboards/40percentclub/nano/keymaps/spooka/keymap.c

@@ -2,8 +2,6 @@
 
 #define _MAIN 0
 
-#define _______ KC_TRNS
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_MAIN] = LAYOUT(
      RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI,

keyboards/40percentclub/nano/nano.h

@@ -1,5 +1,4 @@
-#ifndef NANO_H
+#pragma once
-#define NANO_H
 
 #include "quantum.h"
 
@@ -10,5 +9,3 @@
     { k01, k02, k03, k04 }, \
     { k05, k06, k07, k08 } \
 }
-
-#endif

keyboards/40percentclub/nano/rules.mk

@@ -1,7 +1,4 @@
-SRC = matrix.c
-
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.
@@ -40,16 +37,28 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 
-# Boot Section Size in *bytes*
+# Bootloader selection
-#   Teensy halfKay   512
+#   Teensy       halfkay
-#   Teensy++ halfKay 1024
+#   Pro Micro    caterina
-#   Atmel DFU loader 4096
+#   Atmel DFU    atmel-dfu
-#   LUFA bootloader  4096
+#   LUFA DFU     lufa-dfu
-#   USBaspLoader     2048
+#   QMK DFU      qmk-dfu
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
 
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
@@ -67,4 +76,7 @@ RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+# custom matrix setup
+SRC = matrix.c
 CUSTOM_MATRIX = yes

keyboards/40percentclub/tomato/config.h

@@ -1,5 +1,4 @@
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -44,5 +43,3 @@
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
-
-#endif

keyboards/40percentclub/tomato/keymaps/default/keymap.c

@@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   LAYOUT_ortho_3x10
     ( KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0
     , KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10
-    , KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_DEL, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    , _______,_______,_______,_______,KC_DEL, _______,_______,_______,_______,_______
     ),
   /* Level 2: Symbols Layer
    * ,-------------------------------------------------------------------------------.
@@ -51,8 +51,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    */
   LAYOUT_ortho_3x10
     ( KC_EXLM,KC_AT,  KC_HASH,KC_DLR, KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN
-    , KC_F11,  KC_F12,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_GRAVE
+    , KC_F11,  KC_F12,_______,_______,_______,_______,_______,_______,_______,KC_GRAVE
-    , KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    , _______,_______,_______,_______,_______,_______,_______,_______,_______,_______
     ),
   /* Level 3: RGB Layer
    * ,-------------------------------------------------------------------------------.
@@ -64,9 +64,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * '-------------------------------------------------------------------------------'
    */
   LAYOUT_ortho_3x10
-    ( KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MINS,KC_EQL, KC_LBRC,KC_RBRC,KC_BSLS
+    ( _______,_______,_______,_______,_______,KC_MINS,KC_EQL, KC_LBRC,KC_RBRC,KC_BSLS
-    , KC_TAB, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_COMM,KC_DOT, KC_SLSH,KC_SCLN,KC_QUOT
+    , KC_TAB, _______,_______,_______,_______,KC_COMM,KC_DOT, KC_SLSH,KC_SCLN,KC_QUOT
-    , KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_UP,  KC_RGHT
+    , _______,_______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,  KC_RGHT
     ),
   /* Level 4: RGB Layer
    * ,-------------------------------------------------------------------------------.
@@ -78,9 +78,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * '-------------------------------------------------------------------------------'
    */
   LAYOUT_ortho_3x10
-    ( KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UNDS,KC_PLUS,KC_LCBR,KC_RCBR,KC_PIPE
+    ( _______,_______,_______,_______,_______,KC_UNDS,KC_PLUS,KC_LCBR,KC_RCBR,KC_PIPE
-    , KC_TAB, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LT,  KC_GT,  KC_QUES,KC_COLN,KC_DQUO
+    , KC_TAB, _______,_______,_______,_______,KC_LT,  KC_GT,  KC_QUES,KC_COLN,KC_DQUO
-    , KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_HOME,KC_PGUP,KC_PGDN,KC_END
+    , _______,_______,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_PGDN,KC_END
     ),
   /* Level 5: RGB Layer
    * ,-------------------------------------------------------------------------------.
@@ -92,27 +92,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * '-------------------------------------------------------------------------------'
    */
   LAYOUT_ortho_3x10
-    ( KC_CALC,KC_WSCH,KC_MAIL,KC_MYCM,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    ( KC_CALC,KC_WSCH,KC_MAIL,KC_MYCM,_______,_______,_______,_______,_______,_______
-    , RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,KC_NO,  KC_NO,  RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD
+    , RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,XXXXXXX,XXXXXXX,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD
-    , KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,RESET,  KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
+    , _______,_______,_______,_______,RESET,  _______,_______,_______,_______,_______
     ),
 };
 
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
-    return MACRO_NONE;
-};
-
 void matrix_init_user(void) {
 }
 

keyboards/40percentclub/tomato/rules.mk

@@ -37,21 +37,37 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 
-# Boot Section Size in *bytes*
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
 BOOTLOADER = caterina
 
 
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
 # Build Options
 #   comment out to disable the options.
 #
 BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+MOUSEKEY_ENABLE = yes	  # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+EXTRAKEY_ENABLE = yes	  # Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
+CONSOLE_ENABLE = no			# Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
+COMMAND_ENABLE = no    	# Commands for debug and configuration
-SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+SLEEP_LED_ENABLE = no  	# Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes				# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no   # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes
 

keyboards/40percentclub/tomato/tomato.h

@@ -1,5 +1,4 @@
-#ifndef GHERKIN_H
+#pragma once
-#define GHERKIN_H
 
 #include "quantum.h"
 
@@ -14,5 +13,3 @@
 	{ K30,   K31,   K32,   K33,   K34,   K35 }, \
 	{ K40,   K41,   K42,   K43,   K44,   K45 }  \
 }
-
-#endif

keyboards/40percentclub/ut47/config.h

@@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
 
@@ -83,5 +82,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #   else
 #       error "USART configuration is needed."
 #endif
-
-#endif

keyboards/40percentclub/ut47/keymaps/default/config.h

@@ -14,11 +14,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef CONFIG_USER_H
+#pragma once
-#define CONFIG_USER_H
 
 #include "config_common.h"
 
 // place overrides here
-
-#endif

keyboards/40percentclub/ut47/keymaps/default/keymap.c

@@ -18,7 +18,6 @@
   #include "protocol/serial.h"
 #endif
 
-#define _______ KC_TRNS
 #define LT3_TAB LT(3, KC_TAB)
 #define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT)
 

keyboards/40percentclub/ut47/keymaps/non-us/config.h

@@ -14,11 +14,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef CONFIG_USER_H
+#pragma once
-#define CONFIG_USER_H
 
 #include "config_common.h"
 
 // place overrides here
-
-#endif

keyboards/40percentclub/ut47/keymaps/non-us/keymap.c

@@ -18,7 +18,6 @@
   #include "protocol/serial.h"
 #endif
 
-#define _______ KC_TRNS
 #define LT3_TAB LT(3, KC_TAB)
 #define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT)
 

keyboards/40percentclub/ut47/keymaps/nordic/keymap.c

@@ -21,7 +21,6 @@
 
 #include "keymap_norwegian.h"
 
-#define _______ KC_TRNS
 #define LT3_TAB LT(3, KC_TAB)
 #define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT)
 #define CTRADEL LALT(LCTL(KC_DEL))

keyboards/40percentclub/ut47/keymaps/rgb/config.h

@@ -14,8 +14,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef CONFIG_USER_H
+#pragma once
-#define CONFIG_USER_H
 
 #include "config_common.h"
 
@@ -23,5 +22,3 @@
 #define RGBLIGHT_ANIMATIONS
 #define RGB_DI_PIN D3    // The pin the LED strip is connected to
 #define RGBLED_NUM 7     // Number of LEDs in your strip
-
-#endif

keyboards/40percentclub/ut47/keymaps/rgb/keymap.c

@@ -18,7 +18,6 @@
   #include "protocol/serial.h"
 #endif
 
-#define _______ KC_TRNS
 #define LT3_TAB LT(3, KC_TAB)
 #define MT_RSFT_ENT MT(MOD_RSFT, KC_ENT)
 

keyboards/40percentclub/ut47/rules.mk

@@ -1,5 +1,4 @@
 # MCU name
-#MCU = at90usb1286
 MCU = atmega32u4
 
 # Processor frequency.
@@ -38,12 +37,26 @@ F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-# Bootloader
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
 BOOTLOADER = caterina
 
-# custom matrix setup
+
-CUSTOM_MATRIX = yes
+# If you don't know the bootloader type, then you can specify the
-SRC += matrix.c protocol/serial_uart.c
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
 
 # Build Options
 #   change yes to no to disable
@@ -51,12 +64,12 @@ SRC += matrix.c protocol/serial_uart.c
 BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no        # Console for debug(+400)
+CONSOLE_ENABLE = no         # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes            # USB Nkey Rollover
+NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
@@ -64,6 +77,10 @@ BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC += matrix.c protocol/serial_uart.c
+
 ifeq ($(strip $(LED_ENABLE)), yes)
   OPT_DEFS += -DLED_ENABLE
   SRC += led.c

keyboards/40percentclub/ut47/ut47.h

@@ -13,8 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef UT47_H
+#pragma once
-#define UT47_H
 
 #include "quantum.h"
 
@@ -45,5 +44,3 @@
   )
 
 #define LAYOUT_kc_ut47 LAYOUT_kc
-
-#endif

keyboards/crkbd/crkbd.c

@@ -1 +1,6 @@
 #include "crkbd.h"
+#include "ssd1306.h" 
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	return process_record_gfx(keycode,record) && process_record_user(keycode, record);
+}

keyboards/crkbd/ssd1306.c

@@ -24,12 +24,17 @@ static const unsigned char font[] PROGMEM;
 //static uint16_t last_battery_update;
 //static uint32_t vbat;
 //#define BatteryUpdateInterval 10000 /* milliseconds */
-#define ScreenOffInterval 300000 /* milliseconds */
+
+// 'last_flush' is declared as uint16_t,
+// so this must be less than 65535 
+#define ScreenOffInterval 60000 /* milliseconds */
 #if DEBUG_TO_SCREEN
 static uint8_t displaying;
 #endif
 static uint16_t last_flush;
 
+static bool force_dirty = true;
+
 // Write command sequence.
 // Returns true on success.
 static inline bool _send_cmd1(uint8_t cmd) {
@@ -321,12 +326,19 @@ void iota_gfx_task_user(void) {
 void iota_gfx_task(void) {
   iota_gfx_task_user();
 
-  if (display.dirty) {
+  if (display.dirty|| force_dirty) {
     iota_gfx_flush();
+    force_dirty = false;
   }
 
   if (timer_elapsed(last_flush) > ScreenOffInterval) {
     iota_gfx_off();
   }
 }
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
+  force_dirty = true;
+  return true;
+}
+
 #endif

keyboards/crkbd/ssd1306.h

@@ -3,6 +3,7 @@
 #include <stdbool.h>
 #include <stdio.h>
 #include "pincontrol.h"
+#include "action.h"
 
 enum ssd1306_cmds {
   DisplayOff = 0xAE,
@@ -86,3 +87,5 @@ void matrix_write(struct CharacterMatrix *matrix, const char *data);
 void matrix_write_ln(struct CharacterMatrix *matrix, const char *data);
 void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
 void matrix_render(struct CharacterMatrix *matrix);
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record);

keyboards/helix/pico/pico.c

@@ -2,6 +2,12 @@
 
 
 #ifdef SSD1306OLED
+#include "ssd1306.h"
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	return process_record_gfx(keycode,record) && process_record_user(keycode, record);
+}
+
 void led_set_kb(uint8_t usb_led) {
     // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
     //led_set_user(usb_led);

keyboards/helix/rev1/rev1.c

@@ -2,6 +2,12 @@
 
 
 #ifdef SSD1306OLED
+#include "ssd1306.h"
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	return process_record_gfx(keycode,record) && process_record_user(keycode, record);
+}
+
 void led_set_kb(uint8_t usb_led) {
     // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
     led_set_user(usb_led);

keyboards/helix/rev2/rev2.c

@@ -2,6 +2,12 @@
 
 
 #ifdef SSD1306OLED
+#include "ssd1306.h"
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	return process_record_gfx(keycode,record) && process_record_user(keycode, record);
+}
+
 void led_set_kb(uint8_t usb_led) {
     // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
     //led_set_user(usb_led);

keyboards/helix/ssd1306.c

@@ -1,3 +1,4 @@
+
 #ifdef SSD1306OLED
 
 #include "ssd1306.h"
@@ -27,12 +28,17 @@
 //static uint16_t last_battery_update;
 //static uint32_t vbat;
 //#define BatteryUpdateInterval 10000 /* milliseconds */
-#define ScreenOffInterval 300000 /* milliseconds */
+
+// 'last_flush' is declared as uint16_t,
+// so this must be less than 65535 
+#define ScreenOffInterval 60000 /* milliseconds */
 #if DEBUG_TO_SCREEN
 static uint8_t displaying;
 #endif
 static uint16_t last_flush;
 
+static bool force_dirty = true;
+
 // Write command sequence.
 // Returns true on success.
 static inline bool _send_cmd1(uint8_t cmd) {
@@ -318,12 +324,19 @@ void iota_gfx_task_user(void) {
 void iota_gfx_task(void) {
   iota_gfx_task_user();
 
-  if (display.dirty) {
+  if (display.dirty|| force_dirty) {
     iota_gfx_flush();
+    force_dirty = false;
   }
 
   if (timer_elapsed(last_flush) > ScreenOffInterval) {
     iota_gfx_off();
   }
 }
+
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
+  force_dirty = true;
+  return true;
+}
+
 #endif

keyboards/helix/ssd1306.h

@@ -4,6 +4,7 @@
 #include <stdbool.h>
 #include <stdio.h>
 #include "pincontrol.h"
+#include "action.h"
 
 enum ssd1306_cmds {
   DisplayOff = 0xAE,
@@ -87,6 +88,6 @@ void matrix_write(struct CharacterMatrix *matrix, const char *data);
 void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
 void matrix_render(struct CharacterMatrix *matrix);
 
-
+bool process_record_gfx(uint16_t keycode, keyrecord_t *record);
 
 #endif

keyboards/tragicforce68/keymaps/buswerks/keymap.c

@@ -0,0 +1,60 @@
+#include QMK_KEYBOARD_H
+
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _FN1 2
+
+#define WORD_L LALT(KC_LEFT)
+#define WORD_R LALT(KC_RGHT)
+#define LINE_L LGUI(KC_LEFT)
+#define LINE_R LGUI(KC_RGHT)
+
+#define DESK_L LCTL(KC_LEFT)
+#define DESK_R LCTL(KC_RGHT)
+#define MSN_CTL LCTL(KC_UP)
+
+#define LT_FN LT(_FN1, KC_ESC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────────────┐ ┌────────┬────────┐
+     KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,       KC_BSPC,      KC_INS,  KC_PGUP,
+  //├────────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────────────┤ ├────────┼────────┤
+     KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,    KC_BSLS,    KC_DEL,  KC_PGDN,
+  //├────────────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴────────────┤ └────────┴────────┘
+     LT_FN,         KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,       KC_ENTER,
+  //├──────────────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───────────────────┤ ┌────────┐
+     KC_LSPO,           KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSPC,          KC_UP,
+  //├──────────┬───────┴──┬─────┴────┬───┴────────┴────────┴────────┴────────┴────────┴──────┬─┴────────┼────────┴─┬──────────┬────┬──────┴─┬────────┼────────┐
+     KC_LCTL,   KC_LGUI,   KC_LALT,                        KC_SPACE,                          KC_RALT,   KC_CAPS,   KC_RCTL,        KC_LEFT, KC_DOWN, KC_RGHT
+  //└──────────┴──────────┴──────────┴───────────────────────────────────────────────────────┴──────────┴──────────┴──────────┘    └────────┴────────┴────────┘
+  ),
+
+    [_COLEMAK] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────────────┐ ┌────────┬────────┐
+     KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,       KC_BSPC,      KC_INS,  KC_PGUP,
+  //├────────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────────────┤ ├────────┼────────┤
+     KC_TAB,      KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_LBRC, KC_RBRC,    KC_BSLS,    KC_DEL,  KC_PGDN,
+  //├────────────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴────────────┤ └────────┴────────┘
+     LT_FN,         KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,       KC_ENTER,
+  //├──────────────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───────────────────┤ ┌────────┐
+     KC_LSPO,           KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSPC,          KC_UP,
+  //├──────────┬───────┴──┬─────┴────┬───┴────────┴────────┴────────┴────────┴────────┴──────┬─┴────────┼────────┴─┬──────────┬────┬──────┴─┬────────┼────────┐
+     KC_LCTL,   KC_LGUI,   KC_LALT,                        KC_SPACE,                          KC_RALT,   KC_CAPS,   KC_RCTL,        KC_LEFT, KC_DOWN, KC_RGHT
+  //└──────────┴──────────┴──────────┴───────────────────────────────────────────────────────┴──────────┴──────────┴──────────┘    └────────┴────────┴────────┘
+  ),
+
+  [_FN1] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────┬────────────────┐ ┌────────┬────────┐
+     KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,       _______,      RESET,   KC_HOME,
+  //├────────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────────────┤ ├────────┼────────┤
+     _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______,    _______, KC_END,
+  //├────────────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴─┬──────┴────────────┤ └────────┴────────┘
+     _______,       DESK_L,  MSN_CTL, DESK_R,  _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______,       _______,
+  //├──────────────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───┬────┴───────────────────┤ ┌────────┐
+     _______,           _______, _______, _______, _______, _______, LINE_L,  WORD_L,  WORD_R,  LINE_R,  _______,          _______,          BL_INC,
+  //├──────────┬───────┴──┬─────┴────┬───┴────────┴────────┴────────┴────────┴────────┴──────┬─┴────────┼────────┴─┬──────────┬────┬──────┴─┬────────┼────────┐
+     _______,   _______,   _______,                        KC_BSPC,                           _______,   _______,   KC_MENU,        BL_BRTG, BL_DEC,  BL_TOGG
+  //└──────────┴──────────┴──────────┴───────────────────────────────────────────────────────┴──────────┴──────────┴──────────┘    └────────┴────────┴────────┘
+  )
+};

layouts/community/ortho_4x12/buswerks/keymap.c

@@ -7,6 +7,7 @@ extern keymap_config_t keymap_config;
 #define _DVORAK 2
 #define _LOWER 3
 #define _RAISE 4
+#define _MOUSE 5
 #define _ADJUST 16
 
 enum custom_keycodes {
@@ -15,7 +16,7 @@ enum custom_keycodes {
   DVORAK,
   LOWER,
   RAISE,
-  NAV,
+  MOUSE,
   ADJUST,
 };
 
@@ -29,15 +30,26 @@ enum custom_keycodes {
 #define KC_LOWR LOWER
 #define KC_RASE RAISE
 #define KC_ADJ  ADJUST
+#define MOUSE   TG(_MOUSE)
 
 #define DESK_L  LCTL(KC_LEFT)
 #define DESK_R  LCTL(KC_RGHT)
 #define MSN_CTL LCTL(KC_UP)
 #define APP_WND LCTL(KC_DOWN)
+#define SWITCHR LGUI(KC_TAB)
+
+#define WORD_L  LALT(KC_LEFT)
+#define WORD_R  LALT(KC_RGHT)
+#define LINE_L  LGUI(KC_LEFT)
+#define LINE_R  LGUI(KC_RGHT)
+
+#define COPY    LGUI(KC_C)
+#define CUT     LGUI(KC_X)
+#define PASTE   LGUI(KC_V)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-[_QWERTY] = LAYOUT_ortho_4x12( \
+[_QWERTY] = LAYOUT_ortho_4x12(
   // .--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.
        KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I,    KC_O   , KC_P   , KC_BSPC, \
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
@@ -45,7 +57,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
        KC_LSPO, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSPC, \
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
+       KC_LCTL, KC_HYPR, MOUSE  , KC_LALT, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
   // '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
 ),
 
@@ -57,7 +69,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
        KC_LSPO, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_K   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSPC, \
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
+       KC_LCTL, KC_HYPR, MOUSE  , KC_LALT, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
   // '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
 ),
 
@@ -69,38 +81,50 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
        KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
+       KC_LCTL, KC_HYPR, MOUSE  , KC_LALT, LOWER  , KC_SPC , KC_SPC , RSE_ENT, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
   // '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
 ),
 
 [_LOWER] = LAYOUT_ortho_4x12( \
   // .--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.
-       KC_TILD, _______, KC_VOLD, MSN_CTL, KC_VOLU, _______, _______, KC_7,    KC_8,    KC_9,    KC_MINS, KC_BSPC, \
+       SWITCHR, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_7,    KC_8,    KC_9,    KC_MINS, _______, \
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       _______, _______, DESK_L , APP_WND, DESK_R , _______, _______, KC_4,    KC_5,    KC_6,    KC_PLUS, KC_PIPE, \
+       KC_TILD, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_4,    KC_5,    KC_6,    KC_PLUS, KC_PIPE, \
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       KC_LBRC, _______, _______, _______, _______, _______, _______, KC_1,    KC_2,    KC_3,    KC_SLSH, KC_RBRC, \
+       _______, _______, _______, KC_UNDS, KC_EQL,  _______, _______, KC_1,    KC_2,    KC_3,    _______, _______, \
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       _______, _______, _______, _______, _______, _______, _______, KC_0,    _______, _______, _______, _______ \
+       _______, _______, _______, _______, _______, _______, _______, KC_0,    KC_DOT,  KC_COMM, _______, _______ \
   // '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
 ),
 
 [_RAISE] = LAYOUT_ortho_4x12( \
   // .--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.
-       KC_GRV,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+       KC_GRV,  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_UNDS, KC_EQL,  KC_DEL, \
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT, _______, KC_BSLS, \
+       _______, _______, KC_LBRC, KC_LCBR, KC_RCBR, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, KC_BSLS, \
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       KC_LCBR, KC_CIRC, KC_ASTR, KC_UNDS, KC_EQL,  KC_AMPR, KC_HOME, KC_PGDN, KC_PGUP, KC_END,  _______, KC_RCBR, \
+       _______, _______, _______, _______, _______, _______, LINE_L,  WORD_L,  WORD_R,  LINE_R,  _______, _______, \
   // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
-       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+       _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT \
+  // '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
+),
+
+[_MOUSE] = LAYOUT_ortho_4x12( \
+  // .--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------.
+       SWITCHR, _______, _______, KC_MS_U, _______, _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, \
+  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+       _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, KC_BTN1, KC_BTN2, KC_BTN3, _______, _______, \
+  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+       _______, _______, _______, KC_WH_U, KC_WH_D, COPY,    PASTE,   KC_BTN4, KC_BTN5, _______, _______, _______, \
+  // |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+       _______, _______, MOUSE  , _______, _______, KC_SPC,  KC_SPC,  KC_ENT,  KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT \
   // '--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------'
 ),
 
 [_ADJUST] =  LAYOUT_ortho_4x12( \
-  KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12, \
+  _______, QWERTY,  COLEMAK, DVORAK,  RESET,   _______, _______, _______, _______, AG_NORM, AG_SWAP, _______, \
-  _______, _______, RESET,   AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
+  _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   _______, _______, AU_OFF , AU_ON  , _______, \
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______, _______, _______, _______, \
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
 )
 

layouts/community/ortho_4x12/buswerks/rules.mk

@@ -0,0 +1,9 @@
+BOOTMAGIC_ENABLE  = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE   = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE   = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE    = no         # Console for debug(+400)
+COMMAND_ENABLE    = no        # Commands for debug and configuration
+TAP_DANCE_ENABLE  = no
+AUDIO_ENABLE      = yes
+
+MACROS_ENABLED    = no

quantum/template/avr/config.h

@@ -54,11 +54,24 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // #define RGB_DI_PIN E2
 // #ifdef RGB_DI_PIN
-// #define RGBLIGHT_ANIMATIONS
+//   #define RGBLED_NUM 16
-// #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
 // #endif
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */

util/linux_install.sh

@@ -4,6 +4,8 @@
 
 GENTOO_WARNING="This script will make a USE change in order to ensure that that QMK works on your system. All changes will be sent to the the file /etc/portage/package.use/qmk_firmware -- please review it, and read Portage's output carefully before installing any packages on your system. You will also need to ensure that your kernel is compiled with support for the keyboard chip that you are using (e.g. enable Arduino for the Pro Micro). Further information can be found on the Gentoo wiki."
 
+SLACKWARE_WARNING="You will need the following packages from slackbuilds.org:\n\tarm-binutils\n\tarm-gcc\n\tavr-binutils\n\tavr-gcc\n\tavr-libc\n\tavrdude\n\tdfu-programmer\n\tdfu-util\n\tnewlib\nThese packages will be installed with sudo and sboinstall, so ensure that your user is added to sudoers and that sboinstall is configured."
+
 if grep ID /etc/os-release | grep -qE "fedora"; then
 	sudo dnf install \
 		arm-none-eabi-binutils-cs \
@@ -110,12 +112,15 @@ elif grep ID /etc/os-release | grep -q sabayon; then
 
 elif grep ID /etc/os-release | grep -qE "opensuse|tumbleweed"; then
 	CROSS_AVR_GCC=cross-avr-gcc8
+	CROSS_ARM_GCC=cross-arm-none-gcc8
 	if grep ID /etc/os-release | grep -q "15.0"; then
 		CROSS_AVR_GCC=cross-avr-gcc7
+		CROSS_ARM_GCC=cross-arm-none-gcc7
 	fi
 	sudo zypper install \
 		avr-libc \
 		$CROSS_AVR_GCC \
+		$CROSS_ARM_GCC \
 		cross-avr-binutils \
 		cross-arm-none-newlib-devel \
 		cross-arm-binutils cross-arm-none-newlib-devel \
@@ -126,6 +131,26 @@ elif grep ID /etc/os-release | grep -qE "opensuse|tumbleweed"; then
 		wget \
 		zip
 
+elif grep ID /etc/os-release | grep -q slackware; then
+	printf "$SLACKWARE_WARNING\n"
+	printf "\nProceed (y/N)? "
+	read -r answer
+	if echo "$answer" | grep -iq "^y" ;then
+		sudo sboinstall \
+			avr-binutils \
+			avr-gcc \
+			avr-libc \
+			avrdude \
+			dfu-programmer \
+			dfu-util \
+			arm-binutils \
+			arm-gcc \
+			newlib
+		echo "Done!"
+	else
+		echo "Quitting..."
+	fi
+
 else
 	echo "Sorry, we don't recognize your OS. Help us by contributing support!"
 	echo

util/macos_install.sh

@@ -23,3 +23,4 @@ brew tap osx-cross/avr
 brew tap PX4/homebrew-px4
 brew update
 brew install avr-gcc@7 gcc-arm-none-eabi dfu-programmer avrdude dfu-util
+brew link --force avr-gcc@7