Update the installation script PR (#4167 )

* Update docs to use qmk_install * Update Vagrantfile to use qmk_install
Fixup the WSL install
2018-10-22 13:24:43 -07:00 · 2018-10-22 13:24:43 -07:00 · 2018-10-22 13:24:43 -07:00 · 2018-10-22 13:24:43 -07:00 · 2018-10-22 13:23:22 -07:00 · 2018-10-22 13:22:20 -07:00
462 changed files with 6964 additions and 1417 deletions
@@ -59,7 +59,7 @@ Vagrant.configure(2) do |config|
  # add a # before ,args: and run 'vagrant up' to get a working
  # non-updated box and then attempt to troubleshoot or open a Github issue
-  config.vm.provision "shell", run: "always", path: "./util/install_dependencies.sh", args: "-update"
+  config.vm.provision "shell", run: "always", path: "./util/qmk_install.sh", args: "-update"
  config.vm.post_up_message = <<-EOT
@@ -105,10 +105,12 @@ The solution is to remove and reinstall all affected modules.
 ```
 brew rm avr-gcc
 brew rm dfu-programmer
 brew rm dfu-util
 brew rm gcc-arm-none-eabi
 brew rm avrdude
 brew install avr-gcc
 brew install dfu-programmer
 brew install dfu-util
 brew install gcc-arm-none-eabi
 brew install avrdude
 ```
@@ -2,7 +2,7 @@
 Your keymap can include keycodes that are more advanced than normal, for example keys that switch layers or send modifiers when held, but send regular keycodes when tapped. This page documents the functions that are available to you.
-### Assigning Custom Names
+## Assigning Custom Names
 People often define custom names using `#define`. For example:
@@ -13,7 +13,7 @@ People often define custom names using `#define`. For example:
 This will allow you to use `FN_CAPS` and `ALT_TAB` in your `KEYMAP()`, keeping it more readable.
-### Caveats
+## Caveats
 Currently, `LT()` and `MT()` are limited to the [Basic Keycode set](keycodes_basic.md), meaning you can't use keycodes like `LCTL()`, `KC_TILD`, or anything greater than `0xFF`. Modifiers specified as part of a Layer Tap or Mod Tap's keycode will be ignored.
@@ -36,7 +36,7 @@ These functions allow you to activate layers in various ways. Note that layers a
 Care must be taken when switching layers, it's possible to lock yourself into a layer with no way to deactivate that layer (without unplugging your keyboard.) We've created some guidelines to help users avoid the most common problems.
-### Beginners
+## Beginners
 If you are just getting started with QMK you will want to keep everything simple. Follow these guidelines when setting up your layers:
@@ -44,11 +44,11 @@ If you are just getting started with QMK you will want to keep everything simple
 * Arrange your layers in a "tree" layout, with layer 0 as the root. Do not try to enter the same layer from more than one other layer.
 * In a layer's keymap, only reference higher-numbered layers. Because layers are processed from the highest-numbered (topmost) active layer down, modifying the state of lower layers can be tricky and error-prone.
-### Intermediate Users
+## Intermediate Users
 Sometimes you need more than one base layer. For example, if you want to switch between QWERTY and Dvorak, switch between layouts for different countries, or switch your layout for different videogames. Your base layers should always be the lowest numbered layers. When you have multiple base layers you should always treat them as mutually exclusive. When one base layer is on the others are off.
-### Advanced Users
+## Advanced Users
 Once you have a good feel for how layers work and what you can do, you can get more creative. The rules listed in the beginner section will help you be successful by avoiding some of the tricker details but they can be constraining, especially for ultra-compact keyboard users. Understanding how layers work will allow you to use them in more advanced ways.
@@ -126,6 +126,14 @@ For convenience, QMK includes some Mod-Tap shortcuts to make common combinations
 |`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
 |`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
 ## Caveats
 Unfortunately, these keycodes cannot be used in Mod-Taps or Layer-Taps, since any modifiers specified in the keycode are ignored.
 Additionally, you may run into issues when using Remote Desktop Connection on Windows. Because these codes send shift very fast, Remote Desktop may miss the codes.
 To fix this, open Remote Desktop Connection, click on "Show Options", open the the "Local Resources" tab. In the keyboard section, change the drop down to "On this Computer". This will fix the issue, and allow the characters to work correctly.
 # One Shot Keys
 One shot keys are keys that remain active until the next key is pressed, and then are released. This allows you to type keyboard combinations without pressing more than one key at a time. These keys are usually called "Sticky keys" or "Dead keys".
@@ -146,7 +154,7 @@ You can control the behavior of one shot keys by defining these in `config.h`:
 Sometimes, you want to activate a one-shot layer as part of a macro or tap dance routine. To do this, you need to call `set_oneshot_layer(LAYER, ONESHOT_START)` on key down, and `set_oneshot_layer(ONESHOT_PRESSED)` on key up. If you want to cancel the oneshot, call `reset_oneshot_layer()`. For more complicated actions, take a look at the oneshot implementation in [`process_record`](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/action.c#L429).
-If you're having issues with OSM translating over Remote Desktop Connection, this can be fixed by opening the settings, going to the "Local Resources" tap, and in the keyboard section, change the drop down to "On this Computer".  This will fix the issue and allow OSM to function properly over Remote Desktop.
+If you're having issues with OSM translating over Remote Desktop Connection, this can be fixed by clicking on "Show Options", going to the "Local Resources" tab, and in the keyboard section, change the drop down to "On this Computer".  This will fix the issue and allow OSM to function properly over Remote Desktop.
 # Permissive Hold
@@ -8,7 +8,7 @@ Note: If it is your first time here, Check out the "Complete Newbs guide" instea
 ## Linux
-To ensure you are always up to date, you can just run `sudo util/install_dependencies.sh`. That should always install all the dependencies needed. **This will run `apt-get upgrade`.**
+To ensure you are always up to date, you can just run `sudo util/qmk_install.sh`. That should always install all the dependencies needed. **This will run `apt-get upgrade`.**
 You can also install things manually, but this documentation might not be always up to date with all requirements.
@@ -58,10 +58,11 @@ If you're using [homebrew,](http://brew.sh/) you can use the following commands:
    brew update
    brew install avr-gcc@7
    brew install dfu-programmer
    brew install dfu-util
    brew install gcc-arm-none-eabi
    brew install avrdude
-This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of avr-libc can take over 20 minutes and exhibit high CPU usage.
+This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of `avr-gcc@7` can take over 20 minutes and exhibit high CPU usage.
 ## Windows with msys2 (recommended)
@@ -69,9 +70,9 @@ The best environment to use, for Windows Vista through any later version (tested
 * Install msys2 by downloading it and following the instructions here: http://www.msys2.org
 * Open the ``MSYS2 MingGW 64-bit`` shortcut
-* Navigate to your qmk checkout. For example, if it's in the root of your c drive:
+* Navigate to your QMK repository. For example, if it's in the root of your c drive:
 * `$ cd /c/qmk_firmware`
-* Run `util/msys2_install.sh` and follow the prompts
+* Run `util/qmk_install.sh` and follow the prompts
 ## Windows 10 (deprecated)
 These are the old instructions for Windows 10. We recommend you use [MSYS2 as outlined above](#windows-with-msys2-recommended).
@@ -66,7 +66,7 @@ Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately r
 #define DESCRIPTION     A custom keyboard
 ```
-?> Note: On Windows and macOS the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` fields will be displayed in the list of USB devices. On Linux these values will not be visible in `lsusb`, since Linux takes that information from the list published by the USB-IF.
+?> Note: On Windows and macOS the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` fields will be displayed in the list of USB devices. ?> On Linux these values will not be visible in lsusb by default, since Linux takes the information from the list maintained by [USB ID Repository](http://www.linux-usb.org/usb-ids.html) by default. lsusb will show the information reported by the device when executed with -v option. It is also present in kernel logs after plugging in the device.
 ### Keyboard Matrix Configuration
@@ -6,6 +6,10 @@ These keycodes correspond to characters that are "shifted" on a standard US ANSI
 Unfortunately, these keycodes cannot be used in Mod-Taps or Layer-Taps, since any modifiers specified in the keycode are ignored.
 Additionally, you may run into issues when using Remote Desktop Connection on Windows. Because these codes send shift very fast, Remote Desktop may miss the codes.
 To fix this, open Remote Desktop Connection, click on "Show Options", open the the "Local Resources" tab. In the keyboard section, change the drop down to "On this Computer". This will fix the issue, and allow the characters to work correctly.
 ## Keycodes
 |Key                     |Aliases            |Description        |
@@ -69,7 +69,4 @@ void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask);
 #define CONCAT_EXP(a, b)   CONCAT(a, b)
 #endif
 // #define ws2812_PORTREG  CONCAT_EXP(PORT,ws2812_port)
 // #define ws2812_DDRREG   CONCAT_EXP(DDR,ws2812_port)
 #endif /* LIGHT_WS2812_H_ */
@@ -39,11 +39,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN F7
-#define RGBLIGHT_TIMER
+
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 6    // Number of LEDs
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
@@ -39,10 +39,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN F7
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 1    // Number of LEDs
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
@@ -13,14 +13,11 @@ MIDI_ENABLE      = no  # MIDI controls
 AUDIO_ENABLE     = no  # Audio output on port C6
 UNICODE_ENABLE   = no  # Unicode
 BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
@@ -13,15 +13,7 @@ MIDI_ENABLE      = no  # MIDI controls
 AUDIO_ENABLE     = no  # Audio output on port C6
 UNICODE_ENABLE   = no  # Unicode
 BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
 endif
@@ -13,15 +13,7 @@ MIDI_ENABLE      = no  # MIDI controls
 AUDIO_ENABLE     = no  # Audio output on port C6
 UNICODE_ENABLE   = no  # Unicode
 BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. It uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
 endif
@@ -13,15 +13,7 @@ MIDI_ENABLE      = no  # MIDI controls
 AUDIO_ENABLE     = no  # Audio output on port C6
 UNICODE_ENABLE   = no  # Unicode
 BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE  = yes  # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
 endif
@@ -13,7 +13,7 @@ MIDI_ENABLE      = no  # MIDI controls
 AUDIO_ENABLE     = no  # Audio output on port C6
 UNICODE_ENABLE   = no  # Unicode
 BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -9,7 +9,7 @@ MIDI_ENABLE      = no  # MIDI controls
 AUDIO_ENABLE     = yes # Audio output on port C6
 UNICODE_ENABLE   = no  # Unicode
 BLUETOOTH_ENABLE = no  # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE  = no  # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
@@ -63,7 +63,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -10,7 +10,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = yes        # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 ifndef QUANTUM_DIR
@@ -53,7 +53,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN B4
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 20    // Number of LEDs
 /*
@@ -63,7 +63,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -51,11 +51,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN B1
 #define RGBLIGHT_TIMER
 #define RGBLED_NUM 4
 #define ws2812_PORTREG  PORTB
 #define ws2812_DDRREG   DDRB
 #define RGBLED_NUM 4
 #define RGBLIGHT_HUE_STEP 10
 #define RGBLIGHT_SAT_STEP 17
@@ -13,5 +13,5 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -13,7 +13,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 ifndef QUANTUM_DIR
@@ -14,7 +14,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 UNICODEMAP_ENABLE = yes		# unicodemap
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 TAP_DANCE_ENABLE = yes
 LEADER_ENABLE = yes
@@ -13,5 +13,5 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -14,7 +14,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 ifndef QUANTUM_DIR
@@ -13,7 +13,7 @@ MIDI_ENABLE      = no   # MIDI controls
 AUDIO_ENABLE     = no   # Audio output on port C6
 UNICODE_ENABLE   = no   # Unicode
 BLUETOOTH_ENABLE = no   # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE  = no   # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE  = no   # Enable WS2812 RGB underlight. 
 TAP_DANCE_ENABLE = yes  # see https://docs.qmk.fm/#/feature_tap_dance (+1000)
@@ -14,7 +14,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 ifndef QUANTUM_DIR
@@ -60,7 +60,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 CUSTOM_MATRIX = yes
@@ -13,7 +13,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 ifndef QUANTUM_DIR
@@ -13,7 +13,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 ifndef QUANTUM_DIR
@@ -39,7 +39,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 /* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 50
+// #define DEBOUNCING_DELAY 0
 /* key combination for command */
 #define IS_COMMAND() ( \
@@ -47,9 +47,7 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 4
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 #endif
@@ -42,7 +42,7 @@
 #   change to "no" to disable the options, or define them in the makefile.mk in 
 #   the appropriate keymap folder that will get included automatically
 #
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
@@ -15,7 +15,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 ONEHAND_ENABLE = no        # Enable one-hand typing
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -10,7 +10,7 @@ COMMAND_ENABLE   = no    # Commands for debug and configuration
 CONSOLE_ENABLE   = no    # Console for debug(+400)
 MIDI_ENABLE      = no    # MIDI controls
 NKRO_ENABLE      = no    # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE  = no    # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE  = no    # Enable WS2812 RGB underlight. 
 ifndef QUANTUM_DIR
 	include ../../../../Makefile
@@ -14,7 +14,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 UNICODEMAP_ENABLE = yes
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 PS2_USE_USART = yes
 API_SYSEX_ENABLE = no
@@ -14,7 +14,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 UNICODEMAP_ENABLE = yes
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 PS2_USE_USART = yes
 API_SYSEX_ENABLE = no
@@ -61,7 +61,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 UNICODEMAP_ENABLE = yes
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 PS2_USE_USART = yes
 API_SYSEX_ENABLE = n
 CUSTOM_MATRIX = yes
@@ -24,7 +24,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 UNICODEMAP_ENABLE = yes
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 CUSTOM_MATRIX = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -0,0 +1,17 @@
 XT to USB keyboard converter
 ==============================
 This is a port of TMK's converter/xt_usb to QMK.
 This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)
 Connect Wires
 -------------
 1. Connect **Vcc** and **GND**.
 2. Connect **Clock** and **Data** line. **Clock** is on `PD1`,  **Data** on `PD0` by default. And optionally you can use `PB7` for **Reset**.(Compatible to Soarer's converter) To change pin configuration edit `config.h`.
 3. You need pull-up resistor. **1K-10K Ohm** will be OK.
 XT keyboard protocol  resource
 ------------------------------
 https://github.com/tmk/tmk_keyboard/wiki/IBM-PC-XT-Keyboard-Protocol
@@ -0,0 +1,78 @@
 /*
 Copyright 2012 Jun Wako <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6512
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    QMK
 #define PRODUCT         XT keyboard converter
 #define DESCRIPTION     convert XT keyboard to USB
 /* matrix size */
 #define MATRIX_ROWS 16  // keycode bit: 3-0
 #define MATRIX_COLS 8   // keycode bit: 6-4
 /* key combination for command */
 #define IS_COMMAND() ( \
    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) || \
    keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
 )
 //#define NO_SUSPEND_POWER_DOWN
 /*
 * XT Pin interrupt
 */
 #define XT_CLOCK_PORT  PORTD
 #define XT_CLOCK_PIN   PIND
 #define XT_CLOCK_DDR   DDRD
 #define XT_CLOCK_BIT   1
 #define XT_DATA_PORT   PORTD
 #define XT_DATA_PIN    PIND
 #define XT_DATA_DDR    DDRD
 #define XT_DATA_BIT    0
 #define XT_RST_PORT    PORTB
 #define XT_RST_PIN     PINB
 #define XT_RST_DDR     DDRB
 #define XT_RST_BIT     7
 /* hard reset: low pulse for 500ms and after that HiZ for safety */
 #define XT_RESET() do { \
    XT_RST_PORT &= ~(1<<XT_RST_BIT);  \
    XT_RST_DDR  |=  (1<<XT_RST_BIT);  \
    _delay_ms(500);                   \
    XT_RST_DDR  &= ~(1<<XT_RST_BIT);  \
 } while (0)
 /* INT1 for falling edge of clock line */
 #define XT_INT_INIT()  do {    \
    EICRA |= ((1<<ISC11) |      \
              (0<<ISC10));      \
 } while (0)
 /* clears flag and enables interrupt */
 #define XT_INT_ON()  do {      \
    EIFR  |= (1<<INTF1);        \
    EIMSK |= (1<<INT1);         \
 } while (0)
 #define XT_INT_OFF() do {      \
    EIMSK &= ~(1<<INT1);        \
 } while (0)
 #define XT_INT_VECT    INT1_vect
@@ -0,0 +1 @@
 #pragma once
@@ -0,0 +1,55 @@
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    /* IBM XT keyboard layout
     * ,-------.  ,--------------------------------------------------------------------------.
     * | F1| F2|  |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  BS  |NumLck |ScrLck |
     * |-------|  |--------------------------------------------------------------------------|
     * | F3| F4|  | Tab |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ] |   |  7|  8|  9|  -|
     * |-------|  |------------------------------------------------------|Ent|---------------|
     * | F5| F6|  | Ctrl |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  `|   |  4|  5|  6|   |
     * |-------|  |----------------------------------------------------------------------|   |
     * | F7| F8|  |Shif|  \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift|PrS|  1|  2|  3|  +|
     * |-------|  |----------------------------------------------------------------------|   |
     * | F9|F10|  |  Alt  |               Space                  |CapsLck|   0   |   .   |   |
     * `-------'  `--------------------------------------------------------------------------'
     */
    LAYOUT_xt( \
    KC_F1,  KC_F2,    KC_ESC, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,     KC_NLCK,      KC_SLCK,
    KC_F3,  KC_F4,    KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,        KC_P7,  KC_P8,  KC_P9,  KC_PMNS,
    KC_F5,  KC_F6,    KC_LCTL,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,KC_GRV, KC_ENT, KC_P4,  KC_P5,  KC_P6,
    KC_F7,  KC_F8,    KC_LSFT,KC_BSLS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_PSCR,KC_P1,  KC_P2,  KC_P3,  KC_PPLS,
    KC_F9,  KC_F10,   KC_LALT,                                    KC_SPC,                                       KC_CAPS,          KC_P0,          KC_PDOT
    ),
    /* Extended keyboard layout
     *         ,-----------------------------------------------.
     *         |F13|F14|F15|F16|F17|F18|F19|F20|F21|F22|F23|F24|
     * ,---.   |-----------------------------------------------|     ,-----------.     ,-----------.
     * |Esc|   |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|     |PrS|ScL|Pau|     |VDn|VUp|Mut|
     * `---'   `-----------------------------------------------'     `-----------'     `-----------'
     * ,-----------------------------------------------------------. ,-----------. ,---------------.
     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|JPY|Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -|
     * |-----------------------------------------------------------| |-----------| |---------------|
     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | |Del|End|PgD| |  7|  8|  9|  +|
     * |-----------------------------------------------------------| `-----------' |---------------|
     * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  #|Entr|               |  4|  5|  6|KP,|
     * |-----------------------------------------------------------|     ,---.     |---------------|
     * |Shft|  <|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| RO|Shift |     |Up |     |  1|  2|  3|KP=|
     * |-----------------------------------------------------------| ,-----------. |---------------|
     * |Ctl|Gui|Alt|MHEN|     Space      |HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| |      0|  .|Ent|
     * `-----------------------------------------------------------' `-----------' `---------------'
     */
    /* Try this if your keyboad has exotic keys.
    LAYOUT(
                 KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24,
    KC_ESC,      KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12,                 KC_PSCR,KC_SLCK,KC_PAUS,            KC_VOLD,KC_VOLU,KC_MUTE,
    KC_GRV, KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_JYEN,KC_BSPC,     KC_INS, KC_HOME,KC_PGUP,    KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS,
    KC_TAB, KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,        KC_BSLS,     KC_DEL, KC_END, KC_PGDN,    KC_P7,  KC_P8,  KC_P9,  KC_PPLS,
    KC_CAPS,KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,        KC_NUHS,KC_ENT,                                  KC_P4,  KC_P5,  KC_P6,  KC_PCMM,
    KC_LSFT,KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,        KC_RO,  KC_RSFT,             KC_UP,              KC_P1,  KC_P2,  KC_P3,  KC_PENT,
    KC_LCTL,KC_LGUI,KC_LALT,KC_MHEN,          KC_SPC,                       KC_HENK,KC_KANA,KC_RALT,KC_RGUI,KC_APP, KC_RCTL,     KC_LEFT,KC_DOWN,KC_RGHT,            KC_P0,  KC_PDOT,KC_PEQL
    ),
    */
 };
@@ -0,0 +1,22 @@
 /*
 Copyright 2016 Ethan Apodaca <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "led.h"
 void led_set(uint8_t usb_led) {
  //XT Keyboards do not have LEDs, nothing to do.
 }
@@ -0,0 +1,309 @@
 /*
 Copyright 2011 Jun Wako <[email protected]>
 Copyright 2016 Ethan Apodaca <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include <stdint.h>
 #include <stdbool.h>
 #include "action.h"
 #include "print.h"
 #include "util.h"
 #include "debug.h"
 #include "xt.h"
 #include "matrix.h"
 static void matrix_make(uint8_t code);
 static void matrix_break(uint8_t code);
 static uint8_t matrix[MATRIX_ROWS];
 #define ROW(code)      (code>>3)
 #define COL(code)      (code&0x07)
 __attribute__ ((weak))
 void matrix_init_kb(void) {
    matrix_init_user();
 }
 __attribute__ ((weak))
 void matrix_scan_kb(void) {
    matrix_scan_user();
 }
 __attribute__ ((weak))
 void matrix_init_user(void) {
 }
 __attribute__ ((weak))
 void matrix_scan_user(void) {
 }
 void matrix_init(void)
 {
    debug_enable = true;
    xt_host_init();
    // initialize matrix state: all keys off
    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
    matrix_init_quantum();
 }
 // convert E0-escaped codes into unused area
 static uint8_t move_e0code(uint8_t code) {
    switch(code) {
        // Original IBM XT keyboard has these keys
        case 0x37: return 0x54; // Print Screen
        case 0x46: return 0x55; // Ctrl + Pause
        case 0x1C: return 0x6F; // Keypad Enter
        case 0x35: return 0x7F; // Keypad /
        // Any XT keyobard with these keys?
        // http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/translate.pdf
        // https://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/scancode.doc
        case 0x5B: return 0x5A; // Left  GUI
        case 0x5C: return 0x5B; // Right GUI
        case 0x5D: return 0x5C; // Application
        case 0x5E: return 0x5D; // Power(not used)
        case 0x5F: return 0x5E; // Sleep(not used)
        case 0x63: return 0x5F; // Wake (not used)
        case 0x48: return 0x60; // Up
        case 0x4B: return 0x61; // Left
        case 0x50: return 0x62; // Down
        case 0x4D: return 0x63; // Right
        case 0x52: return 0x71; // Insert
        case 0x53: return 0x72; // Delete
        case 0x47: return 0x74; // Home
        case 0x4F: return 0x75; // End
        case 0x49: return 0x77; // Home
        case 0x51: return 0x78; // End
        case 0x1D: return 0x7A; // Right Ctrl
        case 0x38: return 0x7C; // Right Alt
    }
    return 0x00;
 }
 uint8_t matrix_scan(void)
 {
    static enum {
        INIT,
        E0,
        // Pause: E1 1D 45, E1 9D C5
        E1,
        E1_1D,
        E1_9D,
    } state = INIT;
    uint8_t code = xt_host_recv();
    if (!code) return 0;
    xprintf("%02X ", code);
    switch (state) {
        case INIT:
            switch (code) {
                case 0xE0:
                    state = E0;
                    break;
                case 0xE1:
                    state = E1;
                    break;
                default:
                    if (code < 0x80)
                        matrix_make(code);
                    else
                        matrix_break(code & 0x7F);
                    break;
            }
            break;
        case E0:
            switch (code) {
                case 0x2A:
                case 0xAA:
                case 0x36:
                case 0xB6:
                    //ignore fake shift
                    state = INIT;
                    break;
                default:
                    if (code < 0x80)
                        matrix_make(move_e0code(code));
                    else
                        matrix_break(move_e0code(code & 0x7F));
                    state = INIT;
                    break;
            }
            break;
        case E1:
            switch (code) {
                case 0x1D:
                    state = E1_1D;
                    break;
                case 0x9D:
                    state = E1_9D;
                    break;
                default:
                    state = INIT;
                    break;
            }
            break;
        case E1_1D:
            switch (code) {
                case 0x45:
                    matrix_make(0x55);
                    break;
                default:
                    state = INIT;
                    break;
            }
            break;
        case E1_9D:
            switch (code) {
                case 0x45:
                    matrix_break(0x55);
                    break;
                default:
                    state = INIT;
                    break;
            }
            break;
        default:
            state = INIT;
    }
    matrix_scan_quantum();
    return 1;
 }
 inline
 uint8_t matrix_get_row(uint8_t row)
 {
    return matrix[row];
 }
 inline
 static void matrix_make(uint8_t code)
 {
    if (!matrix_is_on(ROW(code), COL(code))) {
        matrix[ROW(code)] |= 1<<COL(code);
    }
 }
 inline
 static void matrix_break(uint8_t code)
 {
    if (matrix_is_on(ROW(code), COL(code))) {
        matrix[ROW(code)] &= ~(1<<COL(code));
    }
 }
 void matrix_clear(void)
 {
    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
 }
 bool matrix_is_on(uint8_t row, uint8_t col)
 {
    return (matrix_get_row(row) & (1<<col));
 }
 #if (MATRIX_COLS <= 8)
 #    define print_matrix_header()  print("\nr/c 01234567\n")
 #    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
 #elif (MATRIX_COLS <= 16)
 #    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
 #    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
 #elif (MATRIX_COLS <= 32)
 #    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
 #    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
 #endif
 void matrix_print(void)
 {
    print_matrix_header();
    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
        phex(row); print(": ");
        print_matrix_row(row);
        print("\n");
    }
 }
 /*
 XT Scancodes
 ============
 - http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/translate.pdf
 - https://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/scancode.doc
 01-53: Normal codes used in original XT keyboard
 54-7F: Not used in original XT keyboard
 	0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F
    50  -   -   -   -   *   *   x   x   x   x   *   *   *   o   o   o
    60  *   *   *   *   x   x   x   x   x   x   x   x   x   x   x   *
    70  x   *   *   x   *   *   x   *   *   x   *   x   *   x   x   *
 -: codes existed in original XT keyboard
 *: E0-escaped codes converted into unused code area(internal use in TMK)
 x: Non-espcaped codes(not used in real keyboards probably, for CodeSet2-CodeSet1 translation purpose)
 o: reserved
 Usage in TMK:
    00  (reserved) DO NOT USE
    54  PrintScr*
    55  Pause*
    56  Euro2
    57  F11
    58  F12
    59  Keypad =
    5A  LGUI*
    5B  RGUI*
    5C  APP*
    5D  (reserved)
    5E  (reserved)
    5F  (reserved)
    60  cursor*
    61  cursor*
    62  cursor*
    63  cursor*
    64  F13
    65  F14
    66  F15
    67  F16
    68  F17
    69  F18
    6A  F19
    6B  F20
    6C  F21
    6D  F22
    6E  F23
    6F  Keypad Enter*
    70  KANA
    71  nav*
    72  nav*
    73  RO
    74  nav*
    75  nav*
    76  F24
    77  nav*
    78  nav*
    79  HENKAN
    7A  RCTL*
    7B  MUHENKAN
    7C  RALT*
    7D  JPY
    7E  Keypad ,
    7F  Keypad / *
 */
@@ -0,0 +1,62 @@
 # MCU name
 MCU = atmega32u4
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the
 #     processor frequency in Hz. You can then use this symbol in your source code to
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
 #     This will be an integer division of F_USB below, as it is sourced by
 #     F_USB after it has run through any CPU prescalers. Note that this value
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
 F_CPU = 16000000
 #
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
 ARCH = AVR8
 # Input clock frequency.
 #     This will define a symbol, F_USB, in all source code files equal to the
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
 #     at the end, this will be done automatically to create a 32-bit value in your
 #     source code.
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 # Bootloader
 #     This indicates which bootloader is present on the board.
 # BOOTLOADER = caterina # Pro Micro
 BOOTLOADER = halfkay # Teensy
 # Build Options
 #   comment out to disable the options.
 #
 BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
 CONSOLE_ENABLE = yes	# Console for debug(+400)
 COMMAND_ENABLE = yes   # Commands for debug and configuration
 NKRO_ENABLE = yes	# USB Nkey Rollover
 XT_ENABLE = yes
 CUSTOM_MATRIX = yes
 # Optimize size but this may cause error "relocation truncated to fit"
 #EXTRALDFLAGS = -Wl,--relax
 SRC = matrix.c led.c
@@ -0,0 +1 @@
 #include "xt_usb.h"
@@ -0,0 +1,132 @@
 /*
 Copyright 2011,2012,2013 Jun Wako <[email protected]>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "quantum.h"
 /* IBM XT keyboard layout
 * ,-------.  ,--------------------------------------------------------------------------.
 * | F1| F2|  |Esc|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  BS  |NumLck |ScrLck |
 * |-------|  |--------------------------------------------------------------------------|
 * | F3| F4|  | Tab |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ] |   |  7|  8|  9|  -|
 * |-------|  |------------------------------------------------------|Ent|---------------|
 * | F5| F6|  | Ctrl |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  `|   |  4|  5|  6|   |
 * |-------|  |----------------------------------------------------------------------|   |
 * | F7| F8|  |Shif|  \|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /|Shift|PrS|  1|  2|  3|  +|
 * |-------|  |----------------------------------------------------------------------|   |
 * | F9|F10|  |  Alt  |               Space                  |CapsLck|   0   |   .   |   |
 * `-------'  `--------------------------------------------------------------------------'
 * Scan code set 1
 * ,-------.  ,--------------------------------------------------------------------------.
 * | 3B| 3C|  | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D|  0E  |  45   |  46   |
 * |-------|  |--------------------------------------------------------------------------|
 * | 3D| 3E|  | 0F  | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B |   | 47| 48| 49| 4A|
 * |-------|  |------------------------------------------------------| 1C|---------------|
 * | 3F| 40|  | 1D   | 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29|   | 4B| 4C| 4D|   |
 * |-------|  |----------------------------------------------------------------------|   |
 * | 41| 42|  | 2A | 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34| 35|  36 |*37| 4F| 50| 51| 4E|
 * |-------|  |----------------------------------------------------------------------|   |
 * | 43| 44|  |  38   |              39                      |  3A   |  52   |  53   |   |
 * `-------'  `--------------------------------------------------------------------------'
 */
 #define LAYOUT_xt( \
    K3B,K3C,  K01,K02,K03,K04,K05,K06,K07,K08,K09,K0A,K0B,K0C,K0D,K0E,    K45,    K46, \
    K3D,K3E,  K0F,K10,K11,K12,K13,K14,K15,K16,K17,K18,K19,K1A,K1B,    K47,K48,K49,K4A, \
    K3F,K40,  K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K1C,K4B,K4C,K4D,     \
    K41,K42,  K2A,K2B,K2C,K2D,K2E,K2F,K30,K31,K32,K33,K34,K35,K36,K54,K4F,K50,K51,K4E, \
    K43,K44,  K38,                    K39,                    K3A,    K52,    K53      \
 ) { \
    { KC_NO, K01,   K02,   K03,   K04,   K05,   K06,   K07   }, \
    { K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F   }, \
    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17   }, \
    { K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E,   K1F   }, \
    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27   }, \
    { K28,   K29,   K2A,   K2B,   K2C,   K2D,   K2E,   K2F   }, \
    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   KC_NO }, \
    { K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,   K3F   }, \
    { K40,   K41,   K42,   K43,   K44,   K45,   K46,   K47   }, \
    { K48,   K49,   K4A,   K4B,   K4C,   K4D,   K4E,   K4F   }, \
    { K50,   K51,   K52,   K53,   K54,   KC_NO, KC_NO, KC_NO }, \
    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
    { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }  \
 }
 /* Extended keyboard layout
 *         ,-----------------------------------------------.
 *         |F13|F14|F15|F16|F17|F18|F19|F20|F21|F22|F23|F24|
 * ,---.   |-----------------------------------------------|     ,-----------.     ,-----------.
 * |Esc|   |F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|     |PrS|ScL|Pau|     |VDn|VUp|Mut|
 * `---'   `-----------------------------------------------'     `-----------'     `-----------'
 * ,-----------------------------------------------------------. ,-----------. ,---------------.
 * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|JPY|Bsp| |Ins|Hom|PgU| |NmL|  /|  *|  -|
 * |-----------------------------------------------------------| |-----------| |---------------|
 * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \  | |Del|End|PgD| |  7|  8|  9|  +|
 * |-----------------------------------------------------------| `-----------' |---------------|
 * |CapsL |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|  #|Entr|               |  4|  5|  6|KP,|
 * |-----------------------------------------------------------|     ,---.     |---------------|
 * |Shft|  <|  Z|  X|  C|  V|  B|  N|  M|  ,|  .|  /| RO|Shift |     |Up |     |  1|  2|  3|Ent|
 * |-----------------------------------------------------------| ,-----------. |---------------|
 * |Ctl|Gui|Alt|MHEN|     Space      |HENK|KANA|Alt|Gui|App|Ctl| |Lef|Dow|Rig| |      0|  .|KP=|
 * `-----------------------------------------------------------' `-----------' `---------------'
 *         ,-----------------------------------------------.
 *         | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D| 6E| 76|
 * ,---.   |-----------------------------------------------|     ,-----------.     ,-----------.
 * | 01|   | 3B| 3C| 3D| 3E| 3F| 40| 41| 42| 43| 44| 57| 58|     |*37| 46|*45|     |e5E|e5F|e63|
 * `---'   `-----------------------------------------------'     `-----------'     `-----------'
 * ,-----------------------------------------------------------. ,-----------. ,---------------.
 * | 29| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 7D| 0E| |e52|e47|e49| | 45|e35| 37| 4A|
 * |-----------------------------------------------------------| |-----------| |---------------|
 * | 0F  | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B|  2B | |e53|e4F|e51| | 47| 48| 49| 4E|
 * |-----------------------------------------------------------| `-----------' |---------------|
 * |  3A  | 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 00| 1C |               | 4B| 4C| 4D| 7E|
 * |-----------------------------------------------------------|     ,---.     |---------------|
 * | 2A | 56| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 34| 35| 73|  36  |     |e48|     | 4F| 50| 51|e1C|
 * |-----------------------------------------------------------| ,-----------. |---------------|
 * | 1D|e5B| 38| 7B |       39       | 79 | 70 |e38|e5C|e5D|e1D| |e4B|e50|e4D| |     52| 53| 59|
 * `-----------------------------------------------------------' `-----------' `---------------'
 * e: E0-escaped codes
 * *: special handling codes
 */
 #define LAYOUT( \
            K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,K6E,K76,                                     \
    K01,    K3B,K3C,K3D,K3E,K3F,K40,K41,K42,K43,K44,K57,K58,      K54,K46,K55,      K5D,K5E,K5F, \
    K29,K02,K03,K04,K05,K06,K07,K08,K09,K0A,K0B,K0C,K0D,K7D,K0E,  K71,K74,K77,  K45,K7F,K37,K4A, \
    K0F,K10,K11,K12,K13,K14,K15,K16,K17,K18,K19,K1A,K1B,    K2B,  K72,K75,K78,  K47,K48,K49,K4E, \
    K3A,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,    K00,K1C,                K4B,K4C,K4D,K7E, \
    K2A,K56,K2C,K2D,K2E,K2F,K30,K31,K32,K33,K34,K35,    K73,K36,      K60,      K4F,K50,K51,K6F, \
    K1D,K5A,K38,K7B,        K39,        K79,K70,K7C,K5B,K5C,K7A,  K61,K62,K63,      K52,K53,K59  \
 ) { \
    { K00, K01, K02, K03, K04, K05, K06, K07 }, \
    { K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \
    { K10, K11, K12, K13, K14, K15, K16, K17 }, \
    { K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
    { K20, K21, K22, K23, K24, K25, K26, K27 }, \
    { K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \
    { K30, K31, K32, K33, K34, K35, K36, K37 }, \
    { K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \
    { K40, K41, K42, K43, K44, K45, K46, K47 }, \
    { K48, K49, K4A, K4B, K4C, K4D, K4E, K4F }, \
    { K50, K51, K52, K53, K54, K55, K56, K57 }, \
    { K58, K59, K5A, K5B, K5C, K5D, K5E, K5F }, \
    { K60, K61, K62, K63, K64, K65, K66, K67 }, \
    { K68, K69, K6A, K6B, K6C, K6D, K6E, K6F }, \
    { K70, K71, K72, K73, K74, K75, K76, K77 }, \
    { K78, K79, K7A, K7B, K7C, K7D, K7E, K7F }  \
 }
@@ -14,7 +14,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
 SWAP_HANDS_ENABLE = no      # Enable one-hand typing
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -14,7 +14,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
 SWAP_HANDS_ENABLE = no      # Enable one-hand typing
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -14,7 +14,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
 SWAP_HANDS_ENABLE = no      # Enable one-hand typing
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -57,10 +57,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 /*
 * Feature disable options
@@ -65,7 +65,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
 SUBPROJECT_rev1 = no
 USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -62,5 +62,5 @@ MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -1,4 +1,4 @@
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
 AUDIO_ENABLE = no            # Audio disabled while using RGB underlight.
 EXTRAKEY_ENABLE = yes
@@ -63,7 +63,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.
 SUBPROJECT_rev1 = yes
 USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -61,10 +61,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 /*
 * Feature disable options
@@ -50,9 +50,7 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 10
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 #endif
@@ -0,0 +1 @@
 .vscode
@@ -31,7 +31,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* key matrix size */
 #define MATRIX_ROWS 10
 #define MATRIX_COLS 8
-// SERIAL is the only supported
+// Only SERIAL is currently supported
 // By converting this to use I2C, backlight
 // would/should be fully functional as well
 #define USE_SERIAL
 /*
@@ -51,7 +53,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION ROW2COL
-// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_PIN C6
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
@@ -62,7 +64,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 /* number of backlight levels */
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
@@ -0,0 +1,5 @@
 #pragma once
 // place overrides here
 #define PERMISSIVE_HOLD
 #define TAPPING_TERM 150
@@ -0,0 +1,212 @@
 /* Copyright 2017 IslandMan93
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 // KEYMAP
 extern keymap_config_t keymap_config;
 #define _WORKMAN_P 0
 #define _GAME 1
 #define _RAISE 2
 #define _______ KC_TRNS
 #define SHIFT_MOD   MOD_BIT(KC_LSFT)
 #define SPACE_RAISE LT(_RAISE, KC_SPC)
 #define ENT_RAISE   LT(_RAISE, KC_ENT)
 #define PAGE_PREV   S(LCTL(KC_TAB))
 #define PAGE_NEXT   LCTL(KC_TAB)
 enum custom_keycodes
 {
  LO_BSPC = SAFE_RANGE,
  LO_1,
  LO_2,
  LO_3,
  LO_4,
  LO_5,
  LO_6,
  LO_7,
  LO_8,
  LO_9,
  LO_0,
 };
 bool process_record_user(uint16_t keycode, keyrecord_t* record)
 {
    if (record->event.pressed) {
        switch (keycode) {
            case LO_BSPC:
                if (record->event.pressed) {
                    if (get_mods() & SHIFT_MOD) {
                        uint8_t current_mods = get_mods();
                        clear_mods();
                        SEND_STRING(SS_TAP(X_DELETE));
                        set_mods(current_mods);
                    } else {
                        SEND_STRING(SS_TAP(X_BSPACE));
                    }
                }
                return false;
            case LO_1:
                if (record->event.pressed) {
                    uint8_t current_mods = get_mods();
                    if (current_mods & SHIFT_MOD) {
                        clear_mods();
                        SEND_STRING("1");
                        set_mods(current_mods);
                    } else {
                        SEND_STRING("!");
                    }
                }
                return false;
            case LO_2:
                if (record->event.pressed) {
                    uint8_t current_mods = get_mods();
                    if (current_mods & SHIFT_MOD) {
                        clear_mods();
                        SEND_STRING("2");
                        set_mods(current_mods);
                    } else {
                        SEND_STRING("@");
                    }
                }
                return false;
            case LO_3:
                if (record->event.pressed) {
                    uint8_t current_mods = get_mods();
                    if (current_mods & SHIFT_MOD) {
                        clear_mods();
                        SEND_STRING("3");
                        set_mods(current_mods);
                    } else {
                        SEND_STRING("#");
                    }
                }
                return false;
            case LO_4:
                if (record->event.pressed) {
                    uint8_t current_mods = get_mods();
                    if (current_mods & SHIFT_MOD) {
                        clear_mods();
                        SEND_STRING("4");
                        set_mods(current_mods);
                    } else {
                        SEND_STRING("$");
                    }
                }
                return false;
            case LO_5:
                if (record->event.pressed) {
                    uint8_t current_mods = get_mods();
                    if (current_mods & SHIFT_MOD) {
                        clear_mods();
                        SEND_STRING("5");
                        set_mods(current_mods);
                    } else {
                        SEND_STRING("%");
                    }
                }
                return false;
            case LO_6:
                if (record->event.pressed) {
                    uint8_t current_mods = get_mods();
                    if (current_mods & SHIFT_MOD) {
                        clear_mods();
                        SEND_STRING("6");
                        set_mods(current_mods);
                    } else {
                        SEND_STRING("^");
                    }
                }
                return false;
            case LO_7:
                if (record->event.pressed) {
                    uint8_t current_mods = get_mods();
                    if (current_mods & SHIFT_MOD) {
                        clear_mods();
                        SEND_STRING("7");
                        set_mods(current_mods);
                    } else {
                        SEND_STRING("&");
                    }
                }
                return false;
            case LO_8:
                if (record->event.pressed) {
                    uint8_t current_mods = get_mods();
                    if (current_mods & SHIFT_MOD) {
                        clear_mods();
                        SEND_STRING("8");
                        set_mods(current_mods);
                    } else {
                        SEND_STRING("*");
                    }
                }
                return false;
            case LO_9:
                if (record->event.pressed) {
                    uint8_t current_mods = get_mods();
                    if (current_mods & SHIFT_MOD) {
                        clear_mods();
                        SEND_STRING("9");
                        set_mods(current_mods);
                    } else {
                        SEND_STRING("(");
                    }
                }
                return false;
            case LO_0:
                if (record->event.pressed) {
                    uint8_t current_mods = get_mods();
                    if (current_mods & SHIFT_MOD) {
                        clear_mods();
                        SEND_STRING("0");
                        set_mods(current_mods);
                    } else {
                        SEND_STRING(")");
                    }
                }
                return false;
        }
    }
    return true;
 };
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    [_WORKMAN_P] = LAYOUT(
        KC_ESC,  LO_1,    LO_2,      LO_3,      LO_4,    LO_5,    LO_6,                            LO_6,      LO_7,        LO_8,    LO_9,    LO_0,   KC_MINS, KC_ESC,
        KC_GRV,  KC_Q,    KC_D,      KC_R,      KC_W,    KC_B,    KC_LPRN,                         KC_RPRN,   KC_J,        KC_F,    KC_U,    KC_P,   KC_SCLN, KC_EQL,
        KC_TAB,  KC_A,    KC_S,      KC_H,      KC_T,    KC_G,    KC_LCBR,                         KC_RCBR,   KC_Y,        KC_N,    KC_E,    KC_O,   KC_I,    KC_BSLS,
        KC_LCTL, KC_Z,    KC_X,      KC_M,      KC_C,    KC_V,    KC_LBRC,                         KC_RBRC,   KC_K,        KC_L,    KC_COMM, KC_DOT, KC_SLSH, KC_QUOT,
        KC_LSFT, RESET,   PAGE_PREV, PAGE_NEXT, KC_END,  KC_LGUI, KC_LALT, TG(_GAME),     LO_BSPC, ENT_RAISE, SPACE_RAISE, KC_LEFT, KC_DOWN, KC_UP,  KC_RGHT, KC_RCTL),
    [_GAME] = LAYOUT(
        KC_ESC,  KC_1,    KC_2,      KC_3,      KC_4,    KC_5,    KC_6,                            KC_6,      KC_7,        KC_8,    KC_9,    KC_0,   KC_MINS, KC_ESC,
        KC_GRV,  KC_Q,    KC_D,      KC_R,      KC_W,    KC_B,    KC_LPRN,                         KC_RPRN,   KC_J,        KC_F,    KC_U,    KC_P,   KC_SCLN, KC_EQL,
        KC_TAB,  KC_A,    KC_S,      KC_H,      KC_T,    KC_G,    KC_LCBR,                         KC_RCBR,   KC_Y,        KC_N,    KC_E,    KC_O,   KC_I,    KC_BSLS,
        KC_LCTL, KC_Z,    KC_X,      KC_M,      KC_C,    KC_V,    KC_LBRC,                         KC_RBRC,   KC_K,        KC_L,    KC_COMM, KC_DOT, KC_SLSH, KC_QUOT,
        KC_LSFT, KC_F1,   KC_F2,     KC_3,      KC_F5,   KC_SPC,  KC_LALT, TG(_GAME),     LO_BSPC, ENT_RAISE, SPACE_RAISE, KC_LEFT, KC_DOWN, KC_UP,  KC_RGHT, KC_RCTL),
    [_RAISE] = LAYOUT(
        _______, KC_F1,   KC_F2,     KC_F3,     KC_F4,   KC_F5,   KC_F6,                           KC_F6,     KC_F7,       KC_F8,   KC_F9,   KC_F10,  KC_F11,  RESET,
        _______, _______, _______,   _______,   _______, _______, BL_INC,                          KC_VOLU,   _______,     _______, _______, _______, _______, KC_F12,
        _______, _______, _______,   _______,   _______, _______, BL_DEC,                          KC_VOLD,   KC_LEFT,     KC_DOWN, KC_UP,   KC_RGHT, _______, _______,
        _______, _______, _______,   _______,   _______, _______, BL_BRTG,                         KC_MUTE,   _______,     _______, KC_MPRV, KC_MNXT, KC_MPLY, _______,
        _______, _______, _______,   _______,   _______, _______, BL_TOGG, _______,       _______, _______,   _______,     _______, _______, _______, _______, _______),
 };
@@ -0,0 +1,21 @@
 # The Workman keymap for diverge3
 Basic example of the [Workman Programming Layout](https://github.com/ojbucao/workman) which uses the `SHIFT`ed variants of the number row, by default.
 ## Layer 1 - Default Layer
 Workman programming layout.
 ![Workman Layout Picture](https://i.imgur.com/IOOmRfI.png)
 ## Layer 2 - Gaming Layer
 Reverts the number row to the normal 1, 2, 3, etc... for better gaming compatibility.
 ![Gaming Layer Picture](https://i.imgur.com/E0vmEAa.png)
 ## Layer 3 - Raise Layer
 Volume and backlight controls (although backlight is not fully functional using `USE_SERIAL` in `../config.h`).
 ![Raise Layer Misc Buttons Picture](https://i.imgur.com/50L3O62.png)
@@ -0,0 +1 @@
@@ -10,7 +10,11 @@ Make example for this keyboard (after setting up your build environment):
    make diverge3:default
 Or for the [Workman](https://github.com/ojbucao/workman) layout:
    make diverge3:workman
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
 # Reflashing Animus
-Reflashing the stock firmware is pretty easy. Just follow the same steps in the [original guide](https://imgur.com/a/8UapN). You will have to manually reset the Pro Micro (by shorting the GND and RST) during the upload step. Then reapply your keymap through Arbites.
+Reflashing the stock firmware is pretty easy. Just follow the same steps in the [original guide](https://imgur.com/a/8UapN). You will have to manually reset the Pro Micro (by shorting the GND and RST pins) during the upload step. Then reapply your keymap through Arbites.
@@ -66,7 +66,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -64,7 +64,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
@@ -59,7 +59,7 @@ EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 MIDI_ENABLE = no            # MIDI controls
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 UNICODE_ENABLE = no         # Unicode
@@ -15,7 +15,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no          # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -15,7 +15,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no          # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -15,7 +15,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no          # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -15,7 +15,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no          # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -66,10 +66,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 /*
 * Feature disable options
@@ -67,7 +67,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
 SUBPROJECT_rev1 = yes
 USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -73,10 +73,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 20    // Number of LEDs
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 /*
 * Feature disable options
@@ -63,10 +63,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 24    // Number of LEDs
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 /*
 * Feature disable options
@@ -70,10 +70,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 24    // Number of LEDs
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 /*
 * Feature disable options
@@ -64,7 +64,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
 SUBPROJECT_rev1 = yes
 USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -15,7 +15,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -14,7 +14,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
 SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -14,7 +14,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
 SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -60,7 +60,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
 SUBPROJECT_rev1 = no
 USE_I2C = no               # i2c is not supported
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -61,10 +61,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLED_NUM 12    // Number of LEDs
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 /*
 * Feature disable options
@@ -83,4 +81,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
@@ -59,7 +59,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
@@ -1,4 +0,0 @@
 # US International keymap for PCs with German set as input language
 This keymap emulates a US International layout including a deadkey layer on PCs that have German set as the input language. 
 This allows the use of the keyboard on any PC in Germany without the need of changing the input language.
@@ -1,9 +1,8 @@
 #pragma once
-// higher value means deeper actuation point, less sensitive
+/*
-// be careful and only make small adjustments (steps of 1 or 2).
+higher value means deeper actuation point, less sensitive
-// too high and keys will fail to actuate. too low and keys will actuate spontaneously.
+this should probably stay in the range +/-5.
-// test all keys before further adjustment.
+*/
 // this should probably stay in the range +/-5.
 #undef ACTUATION_DEPTH_ADJUSTMENT
-#define ACTUATION_DEPTH_ADJUSTMENT +2
+#define ACTUATION_DEPTH_ADJUSTMENT -1
@@ -28,11 +28,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        _______,KC_PGDN,KC_UP,  KC_PGUP,KC_HOME,XXXXXXX,XXXXXXX,XXXXXXX,GUIU,   XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,     CU_ESCT,
        _______,KC_LEFT,KC_DOWN,KC_RGHT,KC_END, XXXXXXX,XXXXXXX,GUIL,   GUID,   GUIR,   XXXXXXX,XXXXXXX,     KC_ENT,
        _______,KC_MPRV,KC_MPLY,KC_MNXT,KC_VOLD,KC_VOLU,KC_MUTE,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,_______,     KC_PGUP,
-        RESET,  _______,_______,                _______,                _______,_______,_______,     KC_HOME,KC_PGDN,KC_END
+        RESET,  _______,_______,                KC_SPC,                 _______,_______,_______,     KC_HOME,KC_PGDN,KC_END
    )
 };
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-  return process_record_userspace(keycode, record);
+  return true;
 }
@@ -0,0 +1,5 @@
 # SpacebarRacecar US-International FC660C Keymap for German PCs
 This keymap emulates most keys of the US-International layout on PCs that have German set as input language.  
 This allows the use of the keyboard on any PC in Germany without the need to change any settings.
 The keymap is mostly based on the US-International layout.
@@ -66,7 +66,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #ifdef RGBLIGHT_ENABLE
  #define RGB_DI_PIN B5
-  #define RGBLIGHT_TIMER
+  
  #define RGBLED_NUM 18    // Number of LEDs */
 #endif
 /*
@@ -62,7 +62,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 
 USE_SERIAL = yes	# Serial support only on fortitude60
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = yes    # Breathing sleep LED during USB suspend
@@ -56,11 +56,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
+
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 14    // Number of LEDs
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 /*
 * Feature disable options
@@ -63,7 +63,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
 SUBPROJECT_rev1 = yes
 USE_I2C = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -160,8 +160,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 * These settings are for the F4 by default:
 *
 *
 * #define ws2812_PORTREG  PORTF
 * #define ws2812_DDRREG   DDRF
 * #define ws2812_pin PF4
 * #define RGBLED_NUM 14     // Number of LEDs
 * #define RGBLIGHT_HUE_STEP 10
@@ -173,11 +171,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
 */
 /* Deprecated code below
 #define ws2812_PORTREG  PORTF 
 #define ws2812_DDRREG   DDRF
 #define ws2812_pin PF4
 */ 
 #define RGB_DI_PIN F4
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 11         // Number of LEDs
@@ -163,8 +163,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 * These settings are for the F4 by default:
 *
 *
 * #define ws2812_PORTREG  PORTF
 * #define ws2812_DDRREG   DDRF
 * #define ws2812_pin PF4
 * #define RGBLED_NUM 14     // Number of LEDs
 * #define RGBLIGHT_HUE_STEP 10
@@ -176,11 +174,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 * For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
 */
 /* Deprecated code below
 #define ws2812_PORTREG  PORTF 
 #define ws2812_DDRREG   DDRF
 #define ws2812_pin PF4
 */ 
 #define RGB_DI_PIN F4
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 8         // Number of LEDs
@@ -20,7 +20,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = yes           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 TAP_DANCE_ENABLE=yes
@@ -13,7 +13,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 ifndef QUANTUM_DIR
@@ -13,7 +13,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 ifndef QUANTUM_DIR
@@ -13,7 +13,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 ifndef QUANTUM_DIR
@@ -13,7 +13,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight. 
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 ifndef QUANTUM_DIR
@@ -15,7 +15,7 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight. 
 SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
Author	SHA1	Message	Date
Drashna Jaelre	552b1cccec	Update the installation script PR (#4167 ) * Update docs to use qmk_install * Update Vagrantfile to use qmk_install	2018-10-22 13:24:43 -07:00
skullY	11c4c71131	Fixup the WSL install	2018-10-22 13:24:43 -07:00
skullY	79d495f51d	Add opensuse packages provided by @isolatedvirus	2018-10-22 13:24:43 -07:00
skullY	ca56c2145f	Fold install_dependencies.sh into linux_install.sh and freebsd_install.sh	2018-10-22 13:24:43 -07:00
SpacebarRacecar	704a2e8d3c	Keymap: Updates to personal userspace and keymaps (#4206 ) * - updated personal userspace - updated fc660c, niu mini and planck keymaps - added prime_o keymap * Rename README.md to readme.md	2018-10-22 13:23:22 -07:00
SpacebarRacecar	e745144836	Keyboard: Prime_O layout/matrix fix (#4205 )	2018-10-22 13:22:20 -07:00
noroadsleft	352bef99a9	Keyboard: JJ40 Refactor and Configurator support (#3197 ) * Deleted LAYOUTS = planck_grid from rules.mk * Refactor * Configurator support * Fixed offset layout matrix macro * Readded LAYOUT_kc_ortho_4x12 matrix alias * Refactor: rename LAYOUT_offset_right macro as LAYOUT_planck_1x2uR	2018-10-22 12:58:23 -07:00
markspanbroek	6d7745a110	Keyboard: Port of TMK XT USB Converter (#3619 ) * Converter: add XT USB converter from TMK * Converter: port TMK code for USB converter to QMK * Apply requested changes after code review by @drashna - use "pragma once" instead of include guards - use LAYOUT instead of KEYMAP - allow customisation with matrix_init_user() and matrix_scan_user() - set BOOTLOADER instead of BOOTLOADER_SIZE - Add XT_ENABLE to OPT_DEFS * Remove unnecessary lines	2018-10-22 12:37:03 -07:00
noroadsleft	bf57587e62	Keyboard: Zlant refactor and Configurator support (#3678 ) * Matrix/keymap refactor White space and readability updates * Configurator support Added info.json file. * Readme update Markdown formatting * Add support for ortho_4x12 keymaps * Added planck_mit layout support * Disable SWAP_HANDS_ENABLE for zlant:wanleg keymap * Disable BACKLIGHT_ENABLE for zlant:bakingpy keymap	2018-10-22 12:35:09 -07:00
Levi Olson	47dcda1087	Diverge3 - Workman Layout (#3682 ) * Diverge3: Workman Programmers Layout * Diverge3: Comment Removal * Diverge3: Image Links Fixed * Diverge3: Images added * Diverge3: Images cleaned up * Diverge3: Images cleaned up * Diverge3: Removing Images * Diverge3: Improving readme.md * Diverge3: Improving readme.md * Diverge3: Add supporting Comments * Diverge3: Update readme * Diverge3: Update readme * Diverge3: Updates per comments in PR * Diverge3: Updates per comments in PR * Diverge3: Updates per comments in PR * Diverge3: Updates per comments in PR * Diverge3: Updates per comments in PR * Diverge3: Updates per comments in PR	2018-10-22 12:04:28 -07:00
Michael MacDougall	a2b650df47	Keymap: Add mmacdougall keymap (#3852 ) * Add mmacdougall keymap * Make requested changes	2018-10-22 11:59:40 -07:00
Drashna Jaelre	9374c0c9db	Add caveats for shifted characters (#4192 ) * Add caveats for shifted characters And some formatting and grammar corrections. Closes #1037 * Fix spelling of remote * Fix spelling error * Remote not Remove * Remote not Remove	2018-10-22 14:57:15 -04:00
Drashna Jaelre	ab3fbfdb3b	Update hardware config warnings to be more accurate Closes #3565	2018-10-22 14:56:25 -04:00
Drashna Jaelre	7e99d869de	Remove all of the deprecated RGB defines Fixes #3641	2018-10-22 14:55:57 -04:00
Drashna Jaelre	00b6f14821	Replace outdated RGB/Audio information	2018-10-22 14:55:05 -04:00
ROMUSKING	5694e7b6a6	Keymap: add new keymap (#4127 ) * an attempt at own layout * typematrixed dvorak * columns shifted columns shifted out, second pinky column moved to the inside. * Update users/romus/romus.h * code cleanup Changes requested by Drashna + Tap Dance enabled * Fixed EOF Fixed the no newline at the end of file alert. * rgblight fight eeprom writes * rgb code simplification * Update users/romus/README.md * Update quantum/keymap_extras/keymap_slovenian.h	2018-10-22 11:54:31 -07:00
Fernando Pazos Estévez	cf19cb0dbe	Add Bluepill (stm32f103) handwired keyboard (#4126 ) * Main folder Main folder with some changes like the base layout and matrix for uploading in a future to the qmk repositorie * First Commit Firsts non previously commited changes: -Changed to keyboards/handwired -Basic credit to Xydane -70% Layout * Modified file structure for several keyboards As I don't want to create several folders and overcrowd the main folders I made a few modifications to being able of configure several keyboards as revisions of the main keyboard. Added a second variant. Compiling tests went right but I haven't tried it on the controller. * Starting leds * Started dual color leds PWM functions and configs I started to create the PWM functions and configs based on internet examples, it doesn't compile yet * Backtraced a bit to establish and try debug before continuing the pwm Just this, algo some doc as a new pinout image, space cadet modification to try if it works and little more * Deleted unuseful stuff After trying the reestructure to being compatible with several keyboards and that it worked I deleted the other keyboard. Added space cadet shift to ISO. Finally I couldn't debug everything and I'm getting quite frustrated to continue much more than just adding pwm leds * Changed again Iso fix for Space Cadet * Renamed keyboard, future pull I just renamed the keyboard and made some simplifying changes in order to make a pull request sometime soon. I'm too frustrated, tired and knowledge limited to achive using the PWM for leds, I didn't even get to use the debug mode... I intend to end basic led color change using layers (if I can), document everything properly and make a pull request so other users can continue/use this project. * Writed Readme.md file I also corrected a previous compilation problem and ordered a bit the keymaps * Corrected readme * Try to add layer activated light * Revert "Try to add layer activated light" This reverts commit 205af820d845dab08988f329b9f062f558060220. * Progress to fork Coming back to work, upcoming pull * Linked image Corrected readme * Some cleanning Added images to readme, som cleaning, burning after commit. * Almost finished (working) Finally * Finished bluepill firmware Just finished and tried layer dependant led colors. Going for merge * Deleted innecesary stuff and trailing spaces Just as commit title said. * Coding conventions Just modified some files to respect coding conventions * Deleted XXXXXX define Checking some other PR seen this improvement * Changes suggested on PR Firs doing the easy changes * More changes for the PR -I also deleted one unused function for led toggling on matrix.c (Now it uses layer dependent baklight, algo on of on start) -Deleted commented function on keymaps. Right now only needs testing and all pragma replaces. * Almost every pragma change on PR That's almost finished, only waiting for reply due to compiling errors * Revert "Almost every pragma change on PR" This reverts commit 07f23aa862b370cdf0ae37d6f2130c9e9856f491. * Revert last commit I moddified by mistake a file from another keyboard * Solved last pragma Compiles fine. Now I only need to test it, I say you if it works to include it in the main repository.	2018-10-22 11:45:45 -07:00
Mattia Dal Ben	387bd555c7	Keyboard: Add Redox Wireless keyboard (#4180 ) * Added folder and default keymap * Added italian keymap * Fixed readme.md * Added layer display through RGB led * Added layer status display to italian keymap * Fixed indentation * Removed obsolete comments * Updated instructions * Fixed keymaps readmes and removed RGB controls on ADJUST layer * Removed redundant KC_* definitions * Fixed readme file * Changed include guards to pragma once * Removed unused audio functions * Fixed rules.mk file * Added spaces in readme to fix rendering * Reconfigured keymap macro to resemble physical layout * Updated default keymap * Updated italian keymap * Removed unused persistent_default_layer_set function	2018-10-22 11:41:57 -07:00
Naoki Katahira	f69333a0e5	Lily58 default keymap fix / add keymap (#4190 ) * keymap fix/add * keymap fix * file fix * typo fix	2018-10-22 11:39:26 -07:00
Takeshi ISHII	4665e4ffff	Keyboard: Helix serial.c, split_scom.c bug fix and update (#4191 ) * helix/serial.c add support PD1,PD3,PE6 and configuration simplify * Add comment about ATmega32U4 I2C * Add compile time check for ATmega32U4 I2C * change TAB code to 8 SPACE code * Helix serial.c PORTD,PD0 test. OK OK PD0 - PD1 OK PD2 - PD3 - PE6 * Helix serial.c PORTD,PD1 test. OK OK PD0 OK PD1 OK PD2 - PD3 - PE6 * Helix serial.c PORTD,PD3 test. OK OK PD0 OK PD1 OK PD2 OK PD3 - PE6 * Helix serial.c PORTE,PD6 test. OK OK PD0 OK PD1 OK PD2 OK PD3 OK PE6 * Helix serial.c: PD0,PD1,PD3,PE6 all test end * Helix serial.c: rename SOFT_SERIAL_PORT to SOFT_SERIAL_PIN * Helix serial.c add debug code * Helix serial.c: add transaction ID range check * Helix serial.c debug code update * Helix serial.c debug code update * Helix serial.c: Strict checking of the value of tid. * adjust the delay of serial.c * Helix serial.c: remove debug code * remove EXTRAFLAGS += -DCONSOLE_ENABLE from five_rows/rules.mk tmk_core/common.mk has >ifeq ($(strip $(CONSOLE_ENABLE)), yes) > TMK_COMMON_DEFS += -DCONSOLE_ENABLE * Fix error handling in split_scomm.c * add some comment to serial.c * add some comment about SELECT_SOFT_SERIAL_SPEED	2018-10-22 11:38:05 -07:00
Dylan Khor	fbc6bd8266	Minor updates to build tools docs revised (#4195 ) * add initial khord iris keymap * correct path of windows qmk install script	2018-10-22 11:29:04 -07:00
Colin T.A. Gray	91bfbb6256	Updates docs - planck 6 and macos instructions (#4201 ) * add note about how to install rev6 (dfu-util) * include instructions on installing dfu-util on macOS	2018-10-22 11:19:51 -07:00
Yan-Fa Li	dedbc37196	Doesn't need a 50ms debounce Set it to default. I have no idea what I was thinking.	2018-10-22 09:06:18 -07:00