Create AG_TOGG code to toggle Alt/Gui swap.

LEADER_KEY needs to be set in config.h, not keymap.c. Credit goes to @randywallace for figuring this one out:

https://github.com/qmk/qmk_firmware/issues/2514#issuecomment-384847485

Makefile

@@ -578,7 +578,7 @@ lib/%:
 
 git-submodule:
 	git submodule sync --recursive
-	git submodule update --init --recursive
+	git submodule update --init --recursive --progress
 
 ifdef SKIP_VERSION
 SKIP_GIT := yes

build_keyboard.mk

@@ -144,6 +144,9 @@ endif
 ifdef MCU_FAMILY
     FIRMWARE_FORMAT?=bin
     PLATFORM=CHIBIOS
+else ifdef ARM_ATSAM
+    PLATFORM=ARM_ATSAM
+    FIRMWARE_FORMAT=bin
 else
     PLATFORM=AVR
     FIRMWARE_FORMAT?=hex
@@ -286,6 +289,11 @@ endif
     include $(TMK_PATH)/avr.mk
 endif
 
+ifeq ($(PLATFORM),ARM_ATSAM)
+    include $(TMK_PATH)/arm_atsam.mk
+    include $(TMK_PATH)/protocol/arm_atsam.mk
+endif
+
 ifeq ($(PLATFORM),CHIBIOS)
     include $(TMK_PATH)/protocol/chibios.mk
 endif

common_features.mk

@@ -221,17 +221,25 @@ ifeq ($(strip $(USB_HID_ENABLE)), yes)
     include $(TMK_DIR)/protocol/usb_hid.mk
 endif
 
-
 ifeq ($(strip $(HD44780_ENABLE)), yes)
     SRC += drivers/avr/hd44780.c
     OPT_DEFS += -DHD44780_ENABLE
 endif
 
+ifeq ($(strip $(DYNAMIC_KEYMAP_ENABLE)), yes)
+    OPT_DEFS += -DDYNAMIC_KEYMAP_ENABLE
+    SRC += $(QUANTUM_DIR)/dynamic_keymap.c
+endif
+
+ifeq ($(strip $(LEADER_ENABLE)), yes)
+  SRC += $(QUANTUM_DIR)/process_keycode/process_leader.c
+  OPT_DEFS += -DLEADER_ENABLE
+endif
+
 QUANTUM_SRC:= \
     $(QUANTUM_DIR)/quantum.c \
     $(QUANTUM_DIR)/keymap_common.c \
-    $(QUANTUM_DIR)/keycode_config.c \
+    $(QUANTUM_DIR)/keycode_config.c
-    $(QUANTUM_DIR)/process_keycode/process_leader.c
 
 ifndef CUSTOM_MATRIX
     ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
@@ -246,5 +254,5 @@ ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
     QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
                 $(QUANTUM_DIR)/split_common/split_util.c \
                 $(QUANTUM_DIR)/split_common/i2c.c \
-                $(QUANTUM_DIR)/split_common/serial.c  
+                $(QUANTUM_DIR)/split_common/serial.c
 endif

docs/becoming_a_qmk_collaborator.md

@@ -1,7 +1,9 @@
-A QMK collaborator is a keyboard maker/designer that is interested in helping QMK grow and fully support their keyboard(s), and encouraging their users/customers to submit features, ideas, and keymaps. We're always looking to add more keyboards and collaborators, but we ask that they fulfill these requirements:
+# Becoming a QMK Collaborator
 
-* **Have a PCB available for sale** - unfortunately there's just too much variation and complications with handwired keyboards.
+A QMK collaborator is a keyboard maker or designer that is interested in helping QMK grow and fully support their keyboard(s), and encouraging their users and customers to submit features, ideas, and keymaps. We're always looking to add more keyboards and collaborators, but we ask that they fulfill these requirements:
-* **Maintain the your keyboard's directory** - this may just require an initial setup to get your keyboard working, but it could also include accommodating changes made to QMK's core.
+
-* **Approve and merge your keyboard's keymap pull requests** - we like to encourage users to contribute their keymaps for others to see and work from when creating their own.
+* **Have a PCB available for sale.** Unfortunately there's just too much variation and complications with handwired keyboards.
+* **Maintain your keyboard in QMK.** This may just require an initial setup to get your keyboard working, but it could also include accommodating changes made to QMK's core that might break or render any custom code redundant.
+* **Approve and merge keymap pull requests for your keyboard.** We like to encourage users to contribute their keymaps for others to see and work from when creating their own.
 
 If you feel you meet these requirements, shoot us an email at hello@qmk.fm with an introduction and some links to your keyboard!

docs/config_options.md

@@ -119,8 +119,8 @@ If you define these options you will enable the associated feature, which may in
 
 * `#define FORCE_NKRO`
   * NKRO by default requires to be turned on, this forces it on during keyboard startup regardless of EEPROM setting. NKRO can still be turned off but will be turned on again if the keyboard reboots.
-* `#define PREVENT_STUCK_MODIFIERS`
+* `#define STRICT_LAYER_RELEASE`
-  * stores the layer a key press came from so the same layer is used when the key is released, regardless of which layers are enabled
+  * force a key release to be evaluated using the current layer stack instead of remembering which layer it came from (used for advanced cases)
 
 ## Behaviors That Can Be Configured
 
@@ -248,3 +248,7 @@ Use these to enable or disable building certain features. The more you have enab
   * Enable Bluetooth with the Adafruit EZ-Key HID
 * `SPLIT_KEYBOARD`
   * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
+* `WAIT_FOR_USB`
+  * Forces the keyboard to wait for a USB connection to be established before it starts up
+* `NO_USB_STARTUP_CHECK`
+  * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.

docs/contributing.md

@@ -70,6 +70,7 @@ Most of our style is pretty easy to pick up on, but right now it's not entirely
   * Do not write obvious comments
   * If you not sure if a comment is obvious, go ahead and include it.
 * In general we don't wrap lines, they can be as long as needed. If you do choose to wrap lines please do not wrap any wider than 76 columns.
+* We use `#pragma once` at the start of header files rather than old-style include guards (`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`)
 
 # General Guidelines
 

docs/feature_advanced_keycodes.md

@@ -13,9 +13,11 @@ People often define custom names using `#define`. For example:
 
 This will allow you to use `FN_CAPS` and `ALT_TAB` in your `KEYMAP()`, keeping it more readable.
 
-### Limits of These Aliases
+### Caveats
 
-Currently, the keycodes able to used with these functions are limited to the [Basic Keycodes](keycodes_basic.md), meaning you can't use keycodes like `KC_TILD`, or anything greater than 0xFF. For a full list of the keycodes able to be used see [Basic Keycodes](keycodes_basic.md).
+Currently, `LT()` and `MT()` are limited to the [Basic Keycode set](keycodes_basic.md), meaning you can't use keycodes like `LCTL()`, `KC_TILD`, or anything greater than `0xFF`. Modifiers specified as part of a Layer Tap or Mod Tap's keycode will be ignored.
+
+Additionally, if at least one right-handed modifier is specified in a Mod Tap or Layer Tap, it will cause all modifiers specified to become right-handed, so it is not possible to mix and match the two.
 
 # Switching and Toggling Layers
 
@@ -55,57 +57,73 @@ Sometimes, you might want to switch between layers in a macro or as part of a ta
 
 # Modifier Keys
 
-These functions allow you to combine a mod with a keycode. When pressed the keydown for the mod will be sent first, and then *kc* will be sent. When released the keyup for *kc* will be sent and then the mod will be sent.
+These allow you to combine a modifier with a keycode. When pressed, the keydown event for the modifier, then `kc` will be sent. On release, the keyup event for `kc`, then the modifier will be sent.
 
-* `LSFT(kc)` or `S(kc)` - applies left Shift to *kc* (keycode)
+|Key       |Aliases               |Description                                         |
-* `RSFT(kc)` - applies right Shift to *kc*
+|----------|----------------------|----------------------------------------------------|
-* `LCTL(kc)` - applies left Control to *kc*
+|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
-* `RCTL(kc)` - applies right Control to *kc*
+|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
-* `LALT(kc)` - applies left Alt to *kc*
+|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
-* `RALT(kc)` - applies right Alt to *kc*
+|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-* `LGUI(kc)` - applies left GUI (command/win) to *kc*
+|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
-* `RGUI(kc)` - applies right GUI (command/win) to *kc*
+|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
-* `HYPR(kc)` - applies Hyper (all modifiers) to *kc*
+|`RALT(kc)`|                      |Hold Right Alt and press `kc`                       |
-* `MEH(kc)`  - applies Meh (all modifiers except Win/Cmd) to *kc*
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
-* `LCAG(kc)` - applies CtrlAltGui to *kc*
+|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
+|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
+|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
+|`ALTG(kc)`|                      |Hold Right Control and Alt and press `kc`           |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
+|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
 
-You can also chain these, like this:
+You can also chain them, for example `LCTL(LALT(KC_DEL))` makes a key that sends Control+Alt+Delete with a single keypress.
 
-    LALT(LCTL(KC_DEL)) -- this makes a key that sends Alt, Control, and Delete in a single keypress.
+# Mod-Tap
 
-# Mod Tap
+The Mod-Tap key `MT(mod, kc)` acts like a modifier when held, and a regular keycode when tapped. In other words, you can have a key that sends Escape when you tap it, but functions as a Control or Shift key when you hold it down.
 
-`MT(mod, kc)` - is *mod* (modifier key - MOD_LCTL, MOD_LSFT) when held, and *kc* when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down.
+The modifiers this keycode and `OSM()` accept are prefixed with `MOD_`, not `KC_`:
 
-These are the values you can use for the `mod` in `MT()` and `OSM()`:
+|Modifier  |Description                             |
+|----------|----------------------------------------|
+|`MOD_LCTL`|Left Control                            |
+|`MOD_LSFT`|Left Shift                              |
+|`MOD_LALT`|Left Alt                                |
+|`MOD_LGUI`|Left GUI (Windows/Command/Meta key)     |
+|`MOD_RCTL`|Right Control                           |
+|`MOD_RSFT`|Right Shift                             |
+|`MOD_RALT`|Right Alt                               |
+|`MOD_RGUI`|Right GUI (Windows/Command/Meta key)    |
+|`MOD_HYPR`|Hyper (Left Control, Shift, Alt and GUI)|
+|`MOD_MEH` |Meh (Left Control, Shift, and Alt)      |
 
-  * MOD_LCTL
+You can combine these by ORing them together like so:
-  * MOD_LSFT
-  * MOD_LALT
-  * MOD_LGUI
-  * MOD_RCTL
-  * MOD_RSFT
-  * MOD_RALT
-  * MOD_RGUI
-  * MOD_HYPR
-  * MOD_MEH
 
-These can also be combined like `MOD_LCTL | MOD_LSFT` e.g. `MT(MOD_LCTL | MOD_LSFT, KC_ESC)` which would activate Control and Shift when held, and send Escape when tapped.
+```c
+MT(MOD_LCTL | MOD_LSFT, KC_ESC)
+```
 
-We've added shortcuts to make common modifier/tap (mod-tap) mappings more compact:
+This key would activate Left Control and Left Shift when held, and send Escape when tapped.
 
-  * `CTL_T(kc)` - is LCTL when held and *kc* when tapped
+For convenience, QMK includes some Mod-Tap shortcuts to make common combinations more compact in your keymap:
-  * `SFT_T(kc)` - is LSFT when held and *kc* when tapped
-  * `ALT_T(kc)` - is LALT when held and *kc* when tapped
-  * `ALGR_T(kc)` - is AltGr when held and *kc* when tapped
-  * `GUI_T(kc)` - is LGUI when held and *kc* when tapped
-  * `ALL_T(kc)` - is Hyper (all mods) when held and *kc* when tapped. To read more about what you can do with a Hyper key, see [this blog post by Brett Terpstra](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)
-  * `LCAG_T(kc)` - is CtrlAltGui when held and *kc* when tapped
-  * `MEH_T(kc)` - is like Hyper, but not as cool -- does not include the Cmd/Win key, so just sends Alt+Ctrl+Shift.
 
-?> Due to the way that keycodes are structured, any modifiers specified as part of `kc`, such as `LCTL()` or `KC_LPRN`, will only activate when held instead of tapped.
+|Key         |Aliases                                |Description                                            |
-
+|------------|---------------------------------------|-------------------------------------------------------|
-?> Additionally, if there is at least one right-handed modifier, any other modifiers in a chain of functions will turn into their right-handed equivalents, so it is not possible to "mix and match" the two.
+|`LCTL_T(kc)`|`CTL_T(kc)`                            |Left Control when held, `kc` when tapped               |
+|`RCTL_T(kc)`|                                       |Right Control when held, `kc` when tapped              |
+|`LSFT_T(kc)`|`SFT_T(kc)`                            |Left Shift when held, `kc` when tapped                 |
+|`RSFT_T(kc)`|                                       |Right Shift when held, `kc` when tapped                |
+|`LALT_T(kc)`|`ALT_T(kc)`                            |Left Alt when held, `kc` when tapped                   |
+|`RALT_T(kc)`|`ALGR_T(kc)`                           |Right Alt when held, `kc` when tapped                  |
+|`LGUI_T(kc)`|`LCMD_T(kc)`, `RWIN_T(kc)`, `GUI_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`             |Right GUI when held, `kc` when tapped                  |
+|`C_S_T(kc)` |                                       |Left Control and Shift when held, `kc` when tapped     |
+|`MEH_T(kc)` |                                       |Left Control, Shift and Alt when held, `kc` when tapped|
+|`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
+|`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
+|`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
 
 # One Shot Keys
 

docs/feature_bootmagic.md

@@ -57,6 +57,7 @@ Hold down the Bootmagic key (Space by default) and the desired hotkey while plug
 |`MAGIC_UNNO_GUI`                  |         |Enable the GUI keys                       |
 |`MAGIC_SWAP_ALT_GUI`              |`AG_SWAP`|Swap Alt and GUI on both sides (for macOS)|
 |`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Left Alt and Left GUI              |
+|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Left Alt and GUI swap              |
 |`MAGIC_SWAP_BACKSLASH_BACKSPACE`  |         |Swap `\` and Backspace                    |
 |`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|         |Unswap `\` and Backspace                  |
 |`MAGIC_SWAP_CONTROL_CAPSLOCK`     |         |Swap Left Control and Caps Lock           |

docs/feature_leader_key.md

@@ -5,7 +5,7 @@ If you've ever used Vim, you know what a Leader key is. If not, you're about to
 That's what `KC_LEAD` does. Here's an example:
 
 1. Pick a key on your keyboard you want to use as the Leader key. Assign it the keycode `KC_LEAD`. This key would be dedicated just for this -- it's a single action key, can't be used for anything else.
-2. Include the line `#define LEADER_TIMEOUT 300` somewhere in your keymap.c file, probably near the top. The 300 there is 300ms -- that's how long you have for the sequence of keys following the leader. You can tweak this value for comfort, of course.
+2. Include the line `#define LEADER_TIMEOUT 300` in your config.h. The 300 there is 300ms -- that's how long you have for the sequence of keys following the leader. You can tweak this value for comfort, of course.
 3. Within your `matrix_scan_user` function, do something like this:
 
 ```
@@ -39,3 +39,11 @@ void matrix_scan_user(void) {
 As you can see, you have a few function. You can use `SEQ_ONE_KEY` for single-key sequences (Leader followed by just one key), and `SEQ_TWO_KEYS`, `SEQ_THREE_KEYS` up to `SEQ_FIVE_KEYS` for longer sequences.
 
 Each of these accepts one or more keycodes as arguments. This is an important point: You can use keycodes from **any layer on your keyboard**. That layer would need to be active for the leader macro to fire, obviously.
+
+## Adding Leader Key Support in the `rules.mk`
+
+To add support for Leader Key you simply need to add a single line to your keymap's `rules.mk`:
+
+```
+LEADER_ENABLE = yes
+```

docs/feature_rgblight.md

@@ -79,20 +79,23 @@ Your RGB lighting can be configured by placing these `#define`s in your `config.
 
 ## Animations
 
-Not only can this lighting be whatever color you want, if `RGBLIGHT_ANIMATIONS` is defined, you also have a number of animation modes at your disposal:
 
-|Mode |Description          |
+Not only can this lighting be whatever color you want,
-|-----|---------------------|
+if `RGBLIGHT_EFFECT_xxxx` or `RGBLIGHT_ANIMATIONS` is defined, you also have a number of animation modes at your disposal:
-|1    |Solid color          |
+
-|2-5  |Solid color breathing|
+|Mode number symbol           |Additional number  |Description                            |
-|6-8  |Cycling rainbow      |
+|-----------------------------|-------------------|---------------------------------------|
-|9-14 |Swirling rainbow     |
+|`RGBLIGHT_MODE_STATIC_LIGHT` | *None*            |Solid color (this mode is always enabled) |
-|15-20|Snake                |
+|`RGBLIGHT_MODE_BREATHING`    | 0,1,2,3           |Solid color breathing                  |
-|21-23|Knight               |
+|`RGBLIGHT_MODE_RAINBOW_MOOD` | 0,1,2             |Cycling rainbow                        |
-|24   |Christmas            |
+|`RGBLIGHT_MODE_RAINBOW_SWIRL`| 0,1,2,3,4,5       |Swirling rainbow                       |
-|25-34|Static gradient      |
+|`RGBLIGHT_MODE_SNAKE`        | 0,1,2,3,4,5       |Snake                                  |
-|35   |RGB Test             |
+|`RGBLIGHT_MODE_KNIGHT`       | 0,1,2             |Knight                                 |
-|36   |Alternating          |
+|`RGBLIGHT_MODE_CHRISTMAS`    | *None*            |Christmas                              |
+|`RGBLIGHT_MODE_STATIC_GRADIENT`| 0,1,..,9        |Static gradient                        |
+|`RGBLIGHT_MODE_RGB_TEST`     | *None*            |RGB Test                               |
+|`RGBLIGHT_MODE_ALTERNATING`  | *None*            |Alternating                            |
+
 
 Check out [this video](https://youtube.com/watch?v=VKrpPAHlisY) for a demonstration.
 
@@ -100,7 +103,16 @@ The following options can be used to tweak the various animations:
 
 |Define                              |Default      |Description                                                                          |
 |------------------------------------|-------------|-------------------------------------------------------------------------------------|
-|`RGBLIGHT_ANIMATIONS`               |*Not defined*|If defined, enables additional animation modes                                       |
+|`RGBLIGHT_EFFECT_BREATHING`         |*Not defined*|If defined, enable breathing animation mode.                                         |
+|`RGBLIGHT_EFFECT_RAINBOW_MOOD`      |*Not defined*|If defined, enable rainbow mood animation mode.                                      |
+|`RGBLIGHT_EFFECT_RAINBOW_SWIRL`     |*Not defined*|If defined, enable rainbow swirl animation mode.                                     |
+|`RGBLIGHT_EFFECT_SNAKE`             |*Not defined*|If defined, enable snake animation mode.                                             |
+|`RGBLIGHT_EFFECT_KNIGHT`            |*Not defined*|If defined, enable knight animation mode.                                            |
+|`RGBLIGHT_EFFECT_CHRISTMAS`         |*Not defined*|If defined, enable christmas animation mode.                                         |
+|`RGBLIGHT_EFFECT_STATIC_GRADIENT`   |*Not defined*|If defined, enable static gradient mode.                                             |
+|`RGBLIGHT_EFFECT_RGB_TEST`          |*Not defined*|If defined, enable RGB test animation mode.                                          |
+|`RGBLIGHT_EFFECT_ALTERNATING`       |*Not defined*|If defined, enable alternating animation mode.                                       |
+|`RGBLIGHT_ANIMATIONS`               |*Not defined*|If defined, enables all additional animation modes                                   |
 |`RGBLIGHT_EFFECT_BREATHE_CENTER`    |`1.85`       |Used to calculate the curve for the breathing animation. Valid values are 1.0 to 2.7 |
 |`RGBLIGHT_EFFECT_BREATHE_MAX`       |`255`        |The maximum brightness for the breathing mode. Valid values are 1 to 255             |
 |`RGBLIGHT_EFFECT_SNAKE_LENGTH`      |`4`          |The number of LEDs to light up for the "Snake" animation                             |

docs/keycodes.md

@@ -271,6 +271,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`MAGIC_UNSWAP_BACKSLASH_BACKSPACE`|         |Unswap `\` and Backspace            |
 |`MAGIC_UNHOST_NKRO`               |         |Force NKRO off                      |
 |`MAGIC_UNSWAP_ALT_GUI`            |`AG_NORM`|Unswap Alt and GUI on both sides    |
+|`MAGIC_TOGGLE_ALT_GUI`            |`AG_TOGG`|Toggle Alt and GUI swap on both sides|
 |`MAGIC_TOGGLE_NKRO`               |         |Turn NKRO on or off                 |
 
 ## [Bluetooth](feature_bluetooth.md)
@@ -318,7 +319,7 @@ This is a reference only. Each group of keys links to the page documenting their
 ## [Modifiers](feature_advanced_keycodes.md#modifier-keys)
 
 |Key       |Aliases               |Description                                         |
-|----------|----------            |----------------------------------------------------|
+|----------|----------------------|----------------------------------------------------|
 |`KC_HYPR` |                      |Hold Left Control, Shift, Alt and GUI               |
 |`KC_MEH`  |                      |Hold Left Control, Shift and Alt                    |
 |`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
@@ -353,7 +354,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`LCAG_T(kc)`|                                       |Left Control, Alt and GUI when held, `kc` when tapped  |
 |`RCAG_T(kc)`|                                       |Right Control, Alt and GUI when held, `kc` when tapped |
 |`ALL_T(kc)` |                                       |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
-|`SCMD_T(kc)`|`SWIN_T(kc)`                           |Left Shift and GUI when held, `kc` when tapped         |
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`             |Left Shift and GUI when held, `kc` when tapped         |
 |`LCA_T(kc)` |                                       |Left Control and Alt when held, `kc` when tapped       |
 
 ## [RGB Lighting](feature_rgblight.md)

docs/newbs_building_firmware.md

@@ -22,6 +22,20 @@ Start by navigating to the `keymaps` folder for your keyboard.
 
 Once you have the `keymaps` folder open you will want to create a copy of the `default` folder. We highly recommend you name your folder the same as your GitHub username, but you can use any name you want as long as it contains only lower case letters, numbers, and the underscore character.
 
+To automate the process, you also have the option to run the `new_keymap.sh` script. 
+
+Navigate to the `qmk_firmware/util` directory and type the following:
+
+```
+./new_keymap.sh <keyboard path> <username>
+```
+
+For example, for a user named John, trying to make a new keymap for the 1up60hse, they would type in
+
+```
+./new_keymap.sh 1upkeyboards/1up60hse john
+```
+
 ## Open `keymap.c` In Your Favorite Text Editor
 
 Open up your `keymap.c`. Inside this file you'll find the structure that controls how your keyboard behaves. At the top of `keymap.c` there may be some defines and enums that make the keymap easier to read. Farther down you'll find a line that looks like this:

docs/understanding_qmk.md

@@ -12,7 +12,7 @@ You can think of QMK as no different from any other computer program. It is star
 
 The reason for this is the different platforms that QMK supports. The most common platform is `lufa`, which runs on AVR processors such at the atmega32u4. We also support `chibios` and `vusb`.
 
-We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/protocol/lufa/lufa.c#L1129). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/protocol/lufa/lufa.c#L1182). This is [The Main Loop](#the_main_loop).
+We'll focus on AVR processors for the moment, which use the `lufa` platform. You can find the `main()` function in [tmk_core/protocol/lufa/lufa.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1019). If you browse through that function you'll find that it initializes any hardware that has been configured (including USB to the host) and then it starts the core part of the program with a [`while(1)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/protocol/lufa/lufa.c#L1060). This is [The Main Loop](#the-main-loop).
 
 ## The Main Loop
 
@@ -22,7 +22,7 @@ This section of code is called "The Main Loop" because it's responsible for loop
     keyboard_task();
 ```
 
-This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keyboard.c#L154), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
+This is where all the keyboard specific functionality is dispatched. The source code for `keyboard_task()` can be found in [tmk_core/common/keyboard.c](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/tmk_core/common/keyboard.c#L206), and it is responsible for detecting changes in the matrix and turning status LED's on and off.
 
 Within `keyboard_task()` you'll find code to handle:
 
@@ -77,7 +77,7 @@ At the keyboard level we define a C macro (typically named `KEYMAP()`) which map
 
 Notice how the second block of our `KEYMAP()` macro matches the Matrix Scanning array above? This macro is what will map the matrix scanning array to keycodes. However, if you look at a 17 key numpad you'll notice that it has 3 places where the matrix could have a switch but doesn't, due to larger keys. We have populated those spaces with `KC_NO` so that our keymap definition doesn't have to.
 
-You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
+You can also use this macro to handle unusual matrix layouts, for example the [Clueboard rev 2](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/keyboards/clueboard/66/rev2/rev2.h). Explaining that is outside the scope of this document.
 
 ##### Keycode Assignment
 
@@ -130,26 +130,31 @@ Comparing against our keymap we can see that the pressed key is KC_NLCK. From he
 
 ##### Process Record
 
-The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is described below, using cluecard whenever we need to look at the keyboard/keymap level functions.
+The `process_record()` function itself is deceptively simple, but hidden within is a gateway to overriding functionality at various levels of QMK. The chain of events is listed below, using cluecard whenever we need to look at the keyboard/keymap level functions.  Depending on options set in rule.mk or elsewhere, only a subset of the functions below will be included in final firmware.
 
-* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/action.c#L128)
+* [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/tmk_core/common/action.c#L172)
-  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/quantum.c#L140)
+  * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L193)
-    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/master/quantum/quantum.c#L143)
+    * [Map this record to a keycode](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/quantum.c#L213)
-    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/card/card.c#L20)
+    * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_tap_dance.c#L115)
-      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
+    * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_key_lock.c#L62)
-    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_midi.c#L102)
+    * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/quantum/process_keycode/process_clicky.c#L44)
-    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_audio.c#L10)
+    * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/card.c#L20)
-    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_music.c#L69)
+      * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/08c682c193f43e5d54df990680ae93fc2e06150a/keyboards/clueboard/card/keymaps/default/keymap.c#L58)
-    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_tap_dance.c#L75)
+    * [`bool process_rgb_matrix(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/fdd0f915271f79b104aa5d216566bcc3fd134e85/quantum/rgb_matrix.c#L139)
-    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_leader.c#L32)
+    * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_midi.c#L81)
-    * [`bool process_chording(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_chording.c#L41)
+    * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_audio.c#L19)
-    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_combo.c#L115)
+    * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_steno.c#L160)
-    * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_unicode.c#L22)
+    * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_music.c#L114)
-    * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_ucis.c#L91)
+    * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_tap_dance.c#L136)
-    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_printer.c#L77)
+    * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_leader.c#L38)
-    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_auto_shift.c#L47)
+    * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_combo.c#L115)
-    * [`bool process_unicode_map(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/master/quantum/process_keycode/process_unicodemap.c#L47)
+    * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicode.c#L22)
-    * [Identify and process quantum specific keycodes](https://github.com/qmk/qmk_firmware/blob/master/quantum/quantum.c#L211)
+    * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_ucis.c#L91)
+    * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_printer.c#L77)
+    * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_auto_shift.c#L94)
+    * [`bool process_unicode_map(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_unicodemap.c#L47)
+    * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/process_keycode/process_terminal.c#L264)
+    * [Identify and process quantum specific keycodes](https://github.com/qmk/qmk_firmware/blob/661ca4440cc42f3b60697e98985c44b0571ccfc1/quantum/quantum.c#L287)
 
 At any step during this chain of events a function (such as `process_record_kb()`) can `return false` to halt all further processing.
 

keyboards/1upkeyboards/1up60hse/readme.md

@@ -10,6 +10,6 @@ Hardware Availability: [1upkeyboards.com](https://www.1upkeyboards.com/shop/cont
 
 Make example for this keyboard (after setting up your build environment):
 
-    make 1up60hse:default
+    make 1upkeyboards/1up60hse:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/1upkeyboards/1up60rgb/config.h

@@ -43,9 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS

keyboards/1upkeyboards/1up60rgb/readme.md

@@ -8,6 +8,6 @@ Hardware Availability: [1upkeyboards](https://www.1upkeyboards.com/shop/controll
 
 Make example for this keyboard (after setting up your build environment):
 
-    make 1up60rgb:default
+    make 1upkeyboards/1up60rgb:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/1upkeyboards/sweet16/config.h

@@ -9,7 +9,7 @@
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    1up Keyboards
 #define PRODUCT         Sweet16
-#define DESCRIPTION     4x4 grid 
+#define DESCRIPTION     4x4 grid
 
 /* key matrix size */
 #define MATRIX_ROWS 4
@@ -43,9 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN B1
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -55,4 +52,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 
-#endif
+#endif

keyboards/1upkeyboards/sweet16/readme.md

@@ -9,6 +9,6 @@ Hardware Availability: [1up Keyboards](https://1upkeyboards.com/)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make sweet16:default
+    make 1upkeyboards/sweet16:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/4x4/rules.mk

@@ -71,4 +71,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
-LAYOUT = ortho_4x4  ortho_4x8  ortho_4x12  ortho_4x16 
+LAYOUTS = ortho_4x4  ortho_4x8  ortho_4x12  ortho_4x16 

keyboards/5x5/rules.mk

@@ -71,4 +71,4 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
 
-LAYOUT = ortho_5x5  ortho_5x10  ortho_5x15
+LAYOUTS = ortho_5x5  ortho_5x10  ortho_5x15

keyboards/acr60/config.h

@@ -41,9 +41,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 20

keyboards/alf/dc60/readme.md

@@ -10,6 +10,6 @@ Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=96616.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make dc60:default
+    make alf/dc60:default
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/alf/x2/config.h

@@ -43,9 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
@@ -55,4 +52,4 @@
 #define RGBLIGHT_VAL_STEP 8
 #endif
 
-#endif
+#endif

keyboards/alf/x2/readme.md

@@ -0,0 +1,15 @@
+# X2
+
+![x2](https://cdn.shopify.com/s/files/1/1674/0405/products/1_088c2862-1f68-4fdd-a346-965208c3a3de_1024x1024.png?v=1511296076)
+
+A customizable 60% keyboard.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: ALF X2 60%  
+Hardware Availability: [zFrontier](https://en.zfrontier.com/products/group-buy-alf-x2-60)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make alf/x2:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/alf/x2/x2.c

@@ -0,0 +1 @@
+#include "x2.h"

keyboards/alf/x2/x2.h

@@ -1,5 +1,5 @@
-#ifndef ALF_X2_H
+#ifndef X2_H
-#define ALF_X2_H
+#define X2_H
 
 #include "quantum.h"
 
@@ -95,4 +95,4 @@
 	{ K400,  K401,  KC_NO, K403,  K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413,  K414 }   \
 }
 
-#endif
+#endif

keyboards/alf_x2/alf_x2.c

@@ -1 +0,0 @@
-#include "alf_x2.h"

keyboards/alf_x2/readme.md

@@ -1,15 +0,0 @@
-# ALF X2
-
-![alf_x2](https://cdn.shopify.com/s/files/1/1674/0405/products/1_088c2862-1f68-4fdd-a346-965208c3a3de_1024x1024.png?v=1511296076)
-
-A customizable 60% keyboard.
-
-Keyboard Maintainer: QMK Community  
-Hardware Supported: ALF X2 60%  
-Hardware Availability: [zFrontier](https://en.zfrontier.com/products/group-buy-alf-x2-60)
-
-Make example for this keyboard (after setting up your build environment):
-
-    make alf_x2:default
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/alpha/config.h

@@ -43,8 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
 
 #define RGB_DI_PIN F4
 #ifdef RGB_DI_PIN

keyboards/alu84/config.h

@@ -59,9 +59,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLED_NUM 16

keyboards/at101_blackheart/at101_blackheart.c

@@ -0,0 +1 @@
+#include "at101_blackheart.h"

keyboards/at101_blackheart/at101_blackheart.h

@@ -0,0 +1,28 @@
+#ifndef at101_blackheart_H
+#define at101_blackheart_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+	K0000, K0100, K0001, K0101, K0002, K0102, K0003, K0103, K0004, K0104, K0005, K0105, K0006, 			K0106, K0007, K0107, \
+	K0200, K0300, K0201, K0301, K0202, K0302, K0203, K0303, K0204, K0304, K0205, K0305, K0206, K0306, 	K0207, K0307, K0208, 	K0308, K0209, K0309, K0009, \
+	K0400, K0500, K0401, K0501, K0402, K0502, K0403, K0503, K0404, K0504, K0405, K0505, K0406, K0506, 	K0407, K0507, K0408, 	K0508, K0409, K0509, K0109, \
+	K0600, K0700, K0601, K0701, K0602, K0702, K0603, K0703, K0604, K0704, K0605, K0705, K0606,        							K0608, K0708, K0609, K0709, \
+	K0800, K1101, K0900, K0801, K0901, K0802, K0902, K0803, K0903, K0804, K0904, K0805, K0905, K0806, 		   K0807, 			K0808, K0908, K0809, K0909, \
+	K1000, K1100, K1001,  			   K1102,                     		  K1005, K1105, K1006, K1106, 	K1007, K1107, K1008, 		K1108, 	  K1009 \
+) { \
+	{ K0000, K0001, K0002, K0003, K0004, K0005, K0006, K0007, KC_NO, K0009 }, \
+	{ K0100, K0101, K0102, K0103, K0104, K0105, K0106, K0107, KC_NO, K0109 }, \
+	{ K0200, K0201, K0202, K0203, K0204, K0205, K0206, K0207, K0208, K0209 }, \
+	{ K0300, K0301, K0302, K0303, K0304, K0305, K0306, K0307, K0308, K0309 }, \
+	{ K0400, K0401, K0402, K0403, K0404, K0405, K0406, K0407, K0408, K0409 }, \
+	{ K0500, K0501, K0502, K0503, K0504, K0505, K0506, K0507, K0508, K0509 }, \
+	{ K0600, K0601, K0602, K0603, K0604, K0605, K0606, KC_NO, K0608, K0609 }, \
+	{ K0700, K0701, K0702, K0703, K0704, K0705, KC_NO, KC_NO, K0708, K0709 }, \
+	{ K0800, K0801, K0802, K0803, K0804, K0805, K0806, K0807, K0808, K0809 }, \
+	{ K0900, K0901, K0902, K0903, K0904, K0905, KC_NO, KC_NO, K0908, K0909 }, \
+	{ K1000, K1001, KC_NO, KC_NO, KC_NO, K1005, K1006, K1007, K1008, K1009 }, \
+	{ K1100, K1101, K1102, KC_NO, KC_NO, K1105, K1106, K1107, K1108, KC_NO }  \
+}
+
+#endif

keyboards/at101_blackheart/config.h

@@ -0,0 +1,40 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    blindassassin111
+#define PRODUCT         AT101_Blackheart PCB
+#define DESCRIPTION     Replacement AT101 PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 10
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F0, F1, F4, D4, F6, F5, F7, B6, B5, D5, C7, C6 }
+#define MATRIX_COL_PINS { D1, D0, B7, B3, B2, B1, B0, E6, D2, D3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* force n-key rollover*/
+#define FORCE_NKRO
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)

keyboards/at101_blackheart/keymaps/default/keymap.c

@@ -0,0 +1,53 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT(
+		KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, 				KC_PSCR,KC_SLCK, KC_PAUS,
+		KC_GRV, KC_1,  KC_2,  KC_3,  KC_4,  KC_5,  KC_6,  KC_7,  KC_8,  KC_9,  KC_0,   KC_MINS,KC_EQL, KC_BSPC,		KC_INS, KC_HOME, KC_PGUP, 		KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+		KC_TAB, KC_Q,  KC_W,  KC_E,  KC_R,  KC_T,  KC_Y,  KC_U,  KC_I,  KC_O,  KC_P,   KC_LBRC,KC_RBRC,KC_BSLS, 	KC_DEL, KC_END,  KC_PGDN, 		KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+		KC_CAPS,KC_A,  KC_S,  KC_D,  KC_F,  KC_G,  KC_H,  KC_J,  KC_K, 	KC_L,  KC_SCLN,KC_QUOT,KC_ENT, 												KC_P4, 	 KC_P5,   KC_P6,   KC_PEQL,
+		KC_LSFT,KC_BSLS,KC_Z, KC_X,  KC_C,  KC_V,  KC_B,  KC_N,  KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_LSFT,MO(1), 				KC_UP, 					KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+		KC_LCTL,KC_LGUI,KC_LALT, 			KC_SPC,				 		KC_RALT, KC_RGUI,KC_MENU, KC_RCTL,			KC_LEFT,KC_DOWN, KC_RGHT,			KC_P0,		  KC_PDOT),
+
+	LAYOUT(
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 			KC_TRNS, KC_TRNS, KC_TRNS, 			  
+		RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS, 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS, 		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 					 						KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 			 KC_TRNS, 				KC_TRNS, KC_TRNS, KC_TRNS, 
+		KC_TRNS, KC_TRNS, KC_TRNS, 					 KC_TRNS, 							 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 	KC_TRNS, KC_TRNS, KC_TRNS,			KC_TRNS, 	  KC_TRNS),
+};
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+  DDRB |= (1 << 4);
+  DDRD |= (1 << 6) | (1 << 7);
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+    PORTD |= (1 << 7);
+  } else {
+    PORTD &= ~(1 << 7);
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+    PORTB |= (1 << 4);
+  } else {
+    PORTB &= ~(1 << 4);
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+    PORTD |= (1 << 6);
+  } else {
+    PORTD &= ~(1 << 6);
+  }
+}

keyboards/at101_blackheart/readme.md

@@ -0,0 +1,14 @@
+AT101 Blackheart PCB
+===
+
+A replacement PCB for AT101 keyboards.
+
+Keyboard Maintainer: QMK Community and blindassassin111  
+Hardware Supported: AT101 blackheart PCB  
+Hardware Availability: https://deskthority.net/group-buys-f50/programmable-vintage-board-pcbs-omnikey-at101-and-z-150-t19325.html
+
+Make example for this keyboard (after setting up your build environment):
+
+    make at101_blackheart:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/at101_blackheart/rules.mk

@@ -0,0 +1,59 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+BOOTLOADER = halfkay
+
+# Boot Section Size in *bytes*
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no

keyboards/atreus/keymaps/jeremy/keymap.c

@@ -4,8 +4,6 @@
 #include "action_layer.h"
 #include "keymap_colemak.h"
 
-#define PREVENT_STUCK_MODIFIERS
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 #define ALPH 0
 #define NUMS 1

keyboards/atreus/keymaps/khitsule/config.h

@@ -3,8 +3,6 @@
 
 #include "../../config.h"
 
-#define PREVENT_STUCK_MODIFIERS
-
 #define IGNORE_MOD_TAP_INTERRUPT
 
-#endif
+#endif

keyboards/atreus/keymaps/nojjan/config.h

@@ -0,0 +1,10 @@
+#pragma once
+
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+#undef UNUSED_PINS
+
+// Pin configuration for falbatech atreus
+#define MATRIX_ROW_PINS { D0, D1, D3, D2 }
+#define MATRIX_COL_PINS { D7, C6, B5, B4, E6, D4, B6, F6, F7, D6, B7 }
+#define UNUSED_PINS

keyboards/atreus/keymaps/nojjan/keymap.c

@@ -0,0 +1,61 @@
+// this is the style you want to emulate.
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QW 0
+#define _RS 1
+#define _LW 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[_QW] = LAYOUT( /* Qwerty */
+  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P    ,
+  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN ,
+  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH ,
+  KC_ESC, KC_TAB, KC_LGUI,  KC_LSFT, KC_BSPC,  KC_LCTL, KC_LALT, KC_SPC,  MO(_RS), KC_MINS, KC_QUOT, KC_ENT  ),
+/*
+ *  !       @     up     {    }        ||     pgup    7     8     9    *
+ *  #     left   down  right  $        ||     pgdn    4     5     6    +
+ *  [       ]      (     )    &        ||       `     1     2     3    \
+ * lower  insert super shift bksp ctrl || alt space   fn    .     0    =
+ */
+[_RS] = LAYOUT( /* [> RAISE <] */
+  KC_EXLM, KC_AT,   KC_UP,   KC_LCBR, KC_RCBR,                   KC_PGUP, KC_7,    KC_8,   KC_9, KC_ASTR ,
+  KC_HASH, KC_LEFT, KC_DOWN, KC_RGHT, KC_DLR,                    KC_PGDN, KC_4,    KC_5,   KC_6, KC_PLUS ,
+  KC_LBRC, KC_RBRC, KC_LPRN, KC_RPRN, KC_AMPR,                   KC_GRV,  KC_1,    KC_2,   KC_3, KC_BSLS ,
+  TG(_LW), KC_INS,  KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC,  KC_TRNS, KC_DOT, KC_0, KC_EQL  ),
+/*
+ * insert home   up  end   pgup       ||      up     F7    F8    F9   F10
+ *  del   left  down right pgdn       ||     down    F4    F5    F6   F11
+ *       volup             reset      ||             F1    F2    F3   F12
+ *       voldn  super shift bksp ctrl || alt space   L0  prtsc scroll pause
+ */
+[_LW] = LAYOUT( /* [> LOWER <] */
+  KC_INS,  KC_HOME, KC_UP,   KC_END,  KC_PGUP,                   KC_UP,   KC_F7,   KC_F8,   KC_F9,   KC_F10  ,
+  KC_DELT, KC_LEFT, KC_DOWN, KC_RGHT, KC_DOWN,                   KC_DOWN, KC_F4,   KC_F5,   KC_F6,   KC_F11  ,
+  KC_NO,   KC_VOLU, KC_NO,   KC_NO,   RESET,                     KC_NO,   KC_F1,   KC_F2,   KC_F3,   KC_F12  ,
+  KC_NO,   KC_VOLD, KC_LGUI, KC_LSFT, KC_BSPC, KC_LCTL, KC_LALT, KC_SPC,  TO(_QW), KC_PSCR, KC_SLCK, KC_PAUS )
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};

keyboards/atreus/keymaps/xk/config.h

@@ -30,8 +30,7 @@ the Free Software Foundation, either version 2 of the License, or
 #define MOUSEKEY_WHEEL_MAX_SPEED   8
 #define MOUSEKEY_WHEEL_TIME_TO_MAX 40
 
-#define PREVENT_STUCK_MODIFIERS
 #define IGNORE_MOD_TAP_INTERRUPT
 #define PERMISSIVE_HOLD
 
-#endif
+#endif

keyboards/atreus62/keymaps/mneme/config.h

@@ -1,6 +1,5 @@
 #define ONESHOT_TIMEOUT 3000
 #define TAPPING_TERM 200
-#define PREVENT_STUCK_MODIFIERS
 #define FORCE_NKRO
 #define LEADER_TIMEOUT 1000
 

keyboards/atreus62/keymaps/mneme/rules.mk

@@ -3,3 +3,4 @@ NKRO_ENABLE = true
 MOUSEKEY_ENABLE = no
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = no
+LEADER_ENABLE = yes

keyboards/atreus62/keymaps/xyverz/keymap.c

@@ -127,8 +127,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 };
 
-const uint16_t PROGMEM fn_actions[] = {
+void matrix_init_user(void) {
+#ifdef BOOTLOADER_CATERINA
+   // This will disable the red LEDs on the ProMicros
+   DDRD &= ~(1<<5);
+   PORTD &= ~(1<<5);
+   DDRB &= ~(1<<0);
+   PORTB &= ~(1<<0);
+#endif
+};
 
+const uint16_t PROGMEM fn_actions[] = {
 };
 
 void persistent_default_layer_set(uint16_t default_layer) {

keyboards/bananasplit/README.md

@@ -1,15 +0,0 @@
-BananaSplit60
-===
-
-A 60% PCB featuring a split spacebar.
-
-Keyboard Maintainer: QMK Community  
-Hardware Supported: BananaSplit60 PCB  
-Hardware Availability: https://thevankeyboards.com/products/gb-bananasplit-60-keyboard-kit?variant=42149104910
-
-Make example for this keyboard (after setting up your build environment):
-
-    make bananasplit:default
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
-

keyboards/bfo9000/keymaps/andylikescandy6x18/config.h

@@ -37,7 +37,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
  #define PERMISSIVE_HOLD
 
- #define PREVENT_STUCK_MODIFIERS
-
-
 #endif

keyboards/bigseries/1key/config.h

@@ -47,9 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS

keyboards/bigseries/2key/config.h

@@ -47,9 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS

keyboards/bigseries/3key/config.h

@@ -47,9 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS

keyboards/bigseries/4key/config.h

@@ -47,9 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS

keyboards/bigswitch/bigswitch.c

@@ -19,10 +19,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 volatile uint8_t runonce = true;
 static uint16_t my_timer;
 
+__attribute__ ((weak))
 void matrix_init_user(void) {
   my_timer = timer_read();
 }
 
+__attribute__ ((weak))
 void matrix_scan_user(void) {
   if (runonce && timer_elapsed(my_timer) > 1000) {
     runonce = false;

keyboards/bigswitch/config.h

@@ -47,8 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
 
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3

keyboards/bigswitch/keymaps/wanleg/config.h

@@ -0,0 +1,45 @@
+/* Copyright 2018 wanleg
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
+#undef MATRIX_ROW_PINS
+#define MATRIX_ROW_PINS { B4 }
+#undef MATRIX_COL_PINS
+#define MATRIX_COL_PINS { B6 }
+//#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#undef DIODE_DIRECTION
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+#define BREATHING_PERIOD 5
+
+/* for Tap Dance */
+#undef TAPPING_TERM
+#define TAPPING_TERM 700
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+//#define DEBOUNCING_DELAY 5
+#undef DEBOUNCING_DELAY
+#define DEBOUNCING_DELAY 2
+
+// set flashing LED with QMK DFU
+#define QMK_LED B0

keyboards/bigswitch/keymaps/wanleg/keymap.c

@@ -0,0 +1,27 @@
+/* Copyright 2018 wanleg
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "wanleg.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( /* Base */
+TD(CAD_TD) \
+),
+};
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/bigswitch/keymaps/wanleg/rules.mk

@@ -0,0 +1,7 @@
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+
+#If using a ProMicro and it has the QMK DFU bootloader instead of Caterina,
+#run "make <keyboard>:<keymap> dfu=qmk" when compiling to ensure it is flagged properly after being flashed
+ifeq ($(strip $(dfu)), qmk)
+    BOOTLOADER = qmk-dfu
+endif

keyboards/catch22/config.h

@@ -46,9 +46,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN F6
 #define RGBLIGHT_ANIMATIONS

keyboards/chimera_ergo/config.h

@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *  These options are also useful to firmware size reduction.
  */
 
-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG
 

keyboards/chimera_ls/config.h

@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *  These options are also useful to firmware size reduction.
  */
 
-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG
 

keyboards/chimera_ortho/config.h

@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *  These options are also useful to firmware size reduction.
  */
 
-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG
 

keyboards/chocopad/config.h

@@ -40,10 +40,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 8
@@ -56,4 +52,4 @@
 #define ws2812_PORTREG  PORTD
 #define ws2812_DDRREG   DDRD
 
-#endif
+#endif

keyboards/clueboard/60/config.h

@@ -49,9 +49,6 @@
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 6
 
-/* Prevent modifiers from being stuck on after layer changes. */
-#define PREVENT_STUCK_MODIFIERS
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 //#define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

keyboards/clueboard/66/keymaps/bloodlvst/config.h

@@ -3,6 +3,5 @@
 
 #include "../../config.h"
 
-#define PREVENT_STUCK_MODIFIERS
 #define DISABLE_SPACE_CADET_ROLLOVER
 #endif

keyboards/comet46/config.h

@@ -52,8 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *  These options are also useful to firmware size reduction.
  */
 
-#define PREVENT_STUCK_MODIFIERS
-
 /* disable debug print */
 //#define NO_DEBUG
 

keyboards/contra/config.h

@@ -43,10 +43,6 @@
     keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0

keyboards/contra/keymaps/erovia/config.h

@@ -0,0 +1,7 @@
+#pragma once
+
+#define AUTO_SHIFT_TIMEOUT 150
+#define NO_AUTO_SHIFT_SPECIAL
+#define NO_AUTO_SHIFT_NUMERIC
+
+#define TAPPING_TERM 200

keyboards/contra/keymaps/erovia/keymap.c

@@ -0,0 +1,163 @@
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+enum planck_layers {
+  _QWERTY,
+  _COLEMAK,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  LOWER,
+  RAISE
+};
+
+enum {
+  TD_SPACE_CADET_SHIFT = 0,
+  TD_SPACE_CADET_ENTER = 1
+};
+
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [TD_SPACE_CADET_SHIFT] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_LPRN),
+  [TD_SPACE_CADET_ENTER] = ACTION_TAP_DANCE_DOUBLE(KC_ENT, KC_RPRN)
+};
+
+#define TD_SHFT TD(TD_SPACE_CADET_SHIFT)
+#define TD_ENTR TD(TD_SPACE_CADET_ENTER)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | `    |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  '   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  | Alt  | GUI  |Lower | Tab  |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_ortho_4x12(
+  KC_GRV,  KC_Q,   KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  KC_ESC, KC_A,   KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  TD_SHFT, KC_Z,   KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, TD_ENTR,
+  KC_LCTL,  KC_LGUI, KC_LALT, KC_LGUI, LOWER,   KC_TAB,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | `    |   Q  |   W  |   F  |   P  |   B  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Ctrl |   A  |   R  |   S  |   T  |   G  |   M  |   N  |   E  |   I  |   O  |  '   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   D  |   V  |   K  |   H  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  | Alt  | GUI  |Lower | Tab  |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT_ortho_4x12(
+  KC_GRV,  KC_Q,   KC_W,    KC_F,    KC_P,    KC_B,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+  KC_ESC, KC_A,   KC_R,    KC_S,    KC_T,    KC_G,    KC_M,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+  TD(TD_SPACE_CADET_SHIFT), KC_Z,   KC_X,    KC_C,    KC_D,    KC_V,    KC_K,    KC_H,    KC_COMM, KC_DOT,  KC_SLSH, TD(TD_SPACE_CADET_ENTER),
+  KC_LCTL,  KC_LGUI, KC_LALT, KC_LGUI, LOWER,   KC_TAB,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_ortho_4x12(
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR,    KC_ASTR,    KC_LPRN, KC_RPRN, KC_BSPC,
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS,    KC_PLUS,    KC_LCBR, KC_RCBR, KC_PIPE,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END,  _______,
+  _______, _______, _______, _______, _______, _______, _______, _______,    KC_MNXT,    KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Prev | Vol- | Mute | Stop |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_ortho_4x12(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MUTE, KC_MSTP
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |Qwerty|Colemk|      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      | AuSh |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT_ortho_4x12(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, QWERTY,  COLEMAK, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_ASTG
+)
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_COLEMAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/contra/keymaps/erovia/readme.md

@@ -0,0 +1,76 @@
+# Erovia's Contra Keymap
+
+My personal Contra keymap based on the *basic* keymap.  
+
+**Features**
+
+* Qwerty and Colemak Mod-DH support
+* autoshifting
+* double tap LSHIFT and ENTER for quick access to ( and )
+
+## QWERTY (Normal) Layer
+```
+,-----------------------------------------------------------------------------------.
+| `    |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  '   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+| Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| Ctrl | GUI  | Alt  | GUI  |Lower | Tab  |Space |Raise | Left | Down |  Up  |Right |
+`-----------------------------------------------------------------------------------'
+```
+
+## Colemak Layer
+Switch from `Adjust` layer.
+```
+,-----------------------------------------------------------------------------------.
+| `    |   Q  |   W  |   F  |   P  |   B  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Ctrl |   A  |   R  |   S  |   T  |   G  |   M  |   N  |   E  |   I  |   O  |  '   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+| Shift|   Z  |   X  |   C  |   D  |   V  |   K  |   H  |   ,  |   .  |   /  |Enter |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+| Ctrl | GUI  | Alt  | GUI  |Lower | Tab  |Space |Raise | Left | Down |  Up  |Right |
+`-----------------------------------------------------------------------------------'
+```
+
+## Lower
+```
+,-----------------------------------------------------------------------------------.
+|   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |   {  |   }  |  |   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | | Home | End  |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+`-----------------------------------------------------------------------------------'
+```
+
+## Raise
+```
+,-----------------------------------------------------------------------------------.
+|   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+| Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |Pg Up |Pg Dn |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      | Prev | Vol- | Mute | Stop |
+`-----------------------------------------------------------------------------------'
+```
+
+## Adjust
+`AuSh` toggles autoshifting.
+```
+,-----------------------------------------------------------------------------------.
+|      |      |      |      |      |      |      |      |      |      |      |      |
+|------+------+------+------+------+-------------+------+------+------+------+------|
+|      |      |      |      |      |      |      |Qwerty|Colemk|      |      |      |
+|------+------+------+------+------+------|------+------+------+------+------+------|
+|      |      |      |      |      |      |      |      |      |      |      |      |
+|------+------+------+------+------+------+------+------+------+------+------+------|
+|      |      |      |      |      |             |      |      |      |      | AuSh |
+`-----------------------------------------------------------------------------------'
+```

keyboards/contra/keymaps/erovia/rules.mk

@@ -0,0 +1,2 @@
+AUTO_SHIFT_ENABLE = yes
+TAP_DANCE_ENABLE = yes

keyboards/contra/keymaps/ryanm101/config.h

@@ -3,7 +3,6 @@
 
 #include "config_common.h"
 
-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_TERM 200
 
 #ifdef AUDIO_ENABLE
@@ -28,7 +27,7 @@
 /* enable basic MIDI features:
    - MIDI notes can be sent when in Music mode is on
 */
-                                
+
 #define MIDI_BASIC
 
 /* enable advanced MIDI features:
@@ -42,4 +41,4 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 2
 
-#endif
+#endif

keyboards/crawlpad/config.h

@@ -40,9 +40,6 @@
     false \
 )
 
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
 #ifdef RGBLIGHT_ENABLE
 #define RGB_DI_PIN D3
 #define RGBLIGHT_ANIMATIONS

keyboards/crkbd/config.h

@@ -16,9 +16,16 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#pragma once
-#define CONFIG_H
 
 #include "config_common.h"
+#include <serial_config.h>
 
-#endif
+#ifdef USE_Link_Time_Optimization
+  // LTO has issues with macros (action_get_macro) and "functions" (fn_actions),
+  //  so just disable them
+  #define NO_ACTION_MACRO
+  #define NO_ACTION_FUNCTION
+
+  #define DISABLE_LEADER
+#endif // USE_Link_Time_Optimization

keyboards/crkbd/crkbd.h

@@ -1,8 +1,5 @@
-#ifndef CRKBD_H
+#pragma once
-#define CRKBD_H
 
 #ifdef KEYBOARD_crkbd_rev1
   #include "rev1.h"
 #endif
-
-#endif

keyboards/crkbd/i2c.c

@@ -34,7 +34,7 @@ void i2c_delay(void) {
   // _delay_us(100);
 }
 
-// Setup twi to run at 100kHz
+// Setup twi to run at 100kHz or 400kHz (see ./i2c.h SCL_CLOCK)
 void i2c_master_init(void) {
   // no prescaler
   TWSR = 0;

keyboards/crkbd/i2c.h

@@ -1,5 +1,4 @@
-#ifndef I2C_H
+#pragma once
-#define I2C_H
 
 #include <stdint.h>
 
@@ -15,7 +14,7 @@
 
 #define SLAVE_BUFFER_SIZE 0x10
 
-// i2c SCL clock frequency
+// i2c SCL clock frequency 400kHz
 #define SCL_CLOCK  400000L
 
 extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
@@ -45,5 +44,3 @@ extern unsigned char i2c_readNak(void);
 extern unsigned char i2c_read(unsigned char ack);
 
 #define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
-
-#endif

keyboards/crkbd/keymaps/default/config.h

@@ -36,7 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define USE_SERIAL_PD2
 
-#define PREVENT_STUCK_MODIFIERS
 #define TAPPING_FORCE_HOLD
 #define TAPPING_TERM 100
 

keyboards/crkbd/keymaps/default/keymap.c

@@ -5,7 +5,6 @@
   #include "split_util.h"
 #endif
 #ifdef SSD1306OLED
-  #include "LUFA/Drivers/Peripheral/TWI.h"
   #include "ssd1306.h"
 #endif
 
@@ -130,7 +129,6 @@ void matrix_init_user(void) {
     #endif
     //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
     #ifdef SSD1306OLED
-        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
         iota_gfx_init(!has_usb());   // turns on the display
     #endif
 }

keyboards/crkbd/keymaps/default/rules.mk

@@ -21,10 +21,10 @@ SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 # If you want to change the display of OLED, you need to change here
-SRC +=  ../lib/rgb_state_reader.c \
+SRC +=  ./lib/rgb_state_reader.c \
-        ../lib/layer_state_reader.c \
+        ./lib/layer_state_reader.c \
-        ../lib/logo_reader.c \
+        ./lib/logo_reader.c \
-        ../lib/keylogger.c \
+        ./lib/keylogger.c \
-        # ../lib/mode_icon_reader.c \
+        # ./lib/mode_icon_reader.c \
-        # ../lib/host_led_state_reader.c \
+        # ./lib/host_led_state_reader.c \
-        # ../lib/timelogger.c \
+        # ./lib/timelogger.c \

keyboards/crkbd/keymaps/like_jis/keymap.c

@@ -5,7 +5,6 @@
   #include "split_util.h"
 #endif
 #ifdef SSD1306OLED
-  #include "LUFA/Drivers/Peripheral/TWI.h"
   #include "ssd1306.h"
 #endif
 
@@ -124,7 +123,6 @@ void matrix_init_user(void) {
     #endif
     //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
     #ifdef SSD1306OLED
-        TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 800000));
         iota_gfx_init(!has_usb());   // turns on the display
     #endif
 }

keyboards/crkbd/keymaps/like_jis/rules.mk

@@ -21,10 +21,10 @@ SWAP_HANDS_ENABLE = no        # Enable one-hand typing
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 # If you want to change the display of OLED, you need to change here
-SRC +=  ../lib/rgb_state_reader.c \
+SRC +=  ./lib/rgb_state_reader.c \
-        ../lib/layer_state_reader.c \
+        ./lib/layer_state_reader.c \
-        ../lib/logo_reader.c \
+        ./lib/logo_reader.c \
-        ../lib/keylogger.c \
+        ./lib/keylogger.c \
-        # ../lib/mode_icon_reader.c \
+        # ./lib/mode_icon_reader.c \
-        # ../lib/host_led_state_reader.c \
+        # ./lib/host_led_state_reader.c \
-        # ../lib/timelogger.c \
+        # ./lib/timelogger.c \

keyboards/crkbd/pro_micro.h

@@ -21,9 +21,7 @@
 
   $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
 */
-
+#pragma once
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
 
 #include <avr/pgmspace.h>
 
@@ -358,5 +356,3 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
 #define SERIAL_PORT_USBVIRTUAL     Serial
 #define SERIAL_PORT_HARDWARE       Serial1
 #define SERIAL_PORT_HARDWARE_OPEN  Serial1
-
-#endif /* Pins_Arduino_h */

keyboards/crkbd/rev1/config.h

@@ -16,10 +16,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef REV1_CONFIG_H
+#pragma once
-#define REV1_CONFIG_H
-
-#include "../config.h"
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
@@ -82,6 +79,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-
-
-#endif