Merge pull request #1491 from fredizzimo/msys2

Add support for msys2 build environment

.gitignore

@@ -23,6 +23,7 @@ quantum/version.h
 CMakeLists.txt
 .DS_STORE
 /util/wsl_downloaded
+/util/win_downloaded
 
 # Eclipse/PyCharm/Other IDE Settings
 .cproject

drivers/avr/ssd1306.c

@@ -1,7 +1,6 @@
 #ifdef SSD1306OLED
 
 #include "ssd1306.h"
-#include "config.h"
 #include "i2c.h"
 #include <string.h>
 #include "print.h"
@@ -13,18 +12,7 @@
 #include "lufa.h"
 #endif
 #include "sendchar.h"
-#include "pincontrol.h"
+#include "timer.h"
-
-//assign the right code to your layers
-#define _BASE 0
-#define _LOWER 8
-#define _RAISE 16
-#define _FNLAYER 64
-#define _NUMLAY 128
-#define _NLOWER 136
-#define _NFNLAYER 192
-#define _MOUSECURSOR 256
-#define _ADJUST 65560
 
 // Set this to 1 to help diagnose early startup problems
 // when testing power-on with ble.  Turn it off otherwise,
@@ -32,26 +20,6 @@
 // with the matrix scan, causing keys to drop.
 #define DEBUG_TO_SCREEN 0
 
-// Controls the SSD1306 128x32 OLED display via i2c
-
-#define i2cAddress 0x3C
-
-#define DisplayHeight 32
-#define DisplayWidth 128
-
-#define FontHeight 8
-#define FontWidth 6
-
-#define MatrixRows (DisplayHeight / FontHeight)
-#define MatrixCols (DisplayWidth / FontWidth)
-
-struct CharacterMatrix {
-  uint8_t display[MatrixRows][MatrixCols];
-  uint8_t *cursor;
-  bool dirty;
-};
-
-static struct CharacterMatrix display;
 //static uint16_t last_battery_update;
 //static uint32_t vbat;
 //#define BatteryUpdateInterval 10000 /* milliseconds */
@@ -61,54 +29,13 @@ static uint8_t displaying;
 #endif
 static uint16_t last_flush;
 
-enum ssd1306_cmds {
-  DisplayOff = 0xAE,
-  DisplayOn = 0xAF,
-
-  SetContrast = 0x81,
-  DisplayAllOnResume = 0xA4,
-
-  DisplayAllOn = 0xA5,
-  NormalDisplay = 0xA6,
-  InvertDisplay = 0xA7,
-  SetDisplayOffset = 0xD3,
-  SetComPins = 0xda,
-  SetVComDetect = 0xdb,
-  SetDisplayClockDiv = 0xD5,
-  SetPreCharge = 0xd9,
-  SetMultiPlex = 0xa8,
-  SetLowColumn = 0x00,
-  SetHighColumn = 0x10,
-  SetStartLine = 0x40,
-
-  SetMemoryMode = 0x20,
-  ColumnAddr = 0x21,
-  PageAddr = 0x22,
-
-  ComScanInc = 0xc0,
-  ComScanDec = 0xc8,
-  SegRemap = 0xa0,
-  SetChargePump = 0x8d,
-  ExternalVcc = 0x01,
-  SwitchCapVcc = 0x02,
-
-  ActivateScroll = 0x2f,
-  DeActivateScroll = 0x2e,
-  SetVerticalScrollArea = 0xa3,
-  RightHorizontalScroll = 0x26,
-  LeftHorizontalScroll = 0x27,
-  VerticalAndRightHorizontalScroll = 0x29,
-  VerticalAndLeftHorizontalScroll = 0x2a,
-};
-
-
 // Write command sequence.
 // Returns true on success.
 static inline bool _send_cmd1(uint8_t cmd) {
   bool res = false;
 
-  if (i2c_start_write(i2cAddress)) {
+  if (i2c_start_write(SSD1306_ADDRESS)) {
-    xprintf("failed to start write to %d\n", i2cAddress);
+    xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
     goto done;
   }
 
@@ -153,8 +80,6 @@ static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
 #define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
 #define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
 
-static void matrix_clear(struct CharacterMatrix *matrix);
-
 static void clear_display(void) {
   matrix_clear(&display);
 
@@ -163,7 +88,7 @@ static void clear_display(void) {
   send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
   send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
 
-  if (i2c_start_write(i2cAddress)) {
+  if (i2c_start_write(SSD1306_ADDRESS)) {
     goto done;
   }
   if (i2c_master_write(0x40)) {
@@ -209,14 +134,17 @@ bool iota_gfx_init(void) {
   send_cmd2(SetChargePump, 0x14 /* Enable */);
   send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
 
-/// Flips the display orientation 0 degrees
+#ifdef OLED_ROTATE180
-  send_cmd1(SegRemap | 0x1);
-  send_cmd1(ComScanDec);
-/*
 // the following Flip the display orientation 180 degrees
   send_cmd1(SegRemap);
   send_cmd1(ComScanInc);
-// end flip */
+#endif
+#ifndef OLED_ROTATE180
+// Flips the display orientation 0 degrees
+  send_cmd1(SegRemap | 0x1);
+  send_cmd1(ComScanDec);
+#endif
+  
   send_cmd2(SetComPins, 0x2);
   send_cmd2(SetContrast, 0x8f);
   send_cmd2(SetPreCharge, 0xf1);
@@ -262,7 +190,7 @@ done:
   return success;
 }
 
-static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
+void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
   *matrix->cursor = c;
   ++matrix->cursor;
 
@@ -275,7 +203,7 @@ static void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
   }
 }
 
-static void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
+void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
   matrix->dirty = true;
 
   if (c == '\n') {
@@ -296,7 +224,7 @@ void iota_gfx_write_char(uint8_t c) {
   matrix_write_char(&display, c);
 }
 
-static void matrix_write(struct CharacterMatrix *matrix, const char *data) {
+void matrix_write(struct CharacterMatrix *matrix, const char *data) {
   const char *end = data + strlen(data);
   while (data < end) {
     matrix_write_char(matrix, *data);
@@ -308,7 +236,7 @@ void iota_gfx_write(const char *data) {
   matrix_write(&display, data);
 }
 
-static void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
+void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
   while (true) {
     uint8_t c = pgm_read_byte(data);
     if (c == 0) {
@@ -323,7 +251,7 @@ void iota_gfx_write_P(const char *data) {
   matrix_write_P(&display, data);
 }
 
-static void matrix_clear(struct CharacterMatrix *matrix) {
+void matrix_clear(struct CharacterMatrix *matrix) {
   memset(matrix->display, ' ', sizeof(matrix->display));
   matrix->cursor = &matrix->display[0][0];
   matrix->dirty = true;
@@ -333,7 +261,7 @@ void iota_gfx_clear_screen(void) {
   matrix_clear(&display);
 }
 
-static void matrix_render(struct CharacterMatrix *matrix) {
+void matrix_render(struct CharacterMatrix *matrix) {
   last_flush = timer_read();
   iota_gfx_on();
 #if DEBUG_TO_SCREEN
@@ -344,7 +272,7 @@ static void matrix_render(struct CharacterMatrix *matrix) {
   send_cmd3(PageAddr, 0, MatrixRows - 1);
   send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
 
-  if (i2c_start_write(i2cAddress)) {
+  if (i2c_start_write(SSD1306_ADDRESS)) {
     goto done;
   }
   if (i2c_master_write(0x40)) {
@@ -379,84 +307,12 @@ void iota_gfx_flush(void) {
   matrix_render(&display);
 }
 
-static void matrix_update(struct CharacterMatrix *dest,
+__attribute__ ((weak))
-                          const struct CharacterMatrix *source) {
+void iota_gfx_task_user(void) {
-  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
-    memcpy(dest->display, source->display, sizeof(dest->display));
-    dest->dirty = true;
-  }
-}
-
-static void render_status_info(void) {
-#if DEBUG_TO_SCREEN
-  if (debug_enable) {
-    return;
-  }
-#endif
-
-  struct CharacterMatrix matrix;
-
-  matrix_clear(&matrix);
-  matrix_write_P(&matrix, PSTR("USB: "));
-#ifdef PROTOCOL_LUFA
-  switch (USB_DeviceState) {
-    case DEVICE_STATE_Unattached:
-      matrix_write_P(&matrix, PSTR("Unattached"));
-      break;
-    case DEVICE_STATE_Suspended:
-      matrix_write_P(&matrix, PSTR("Suspended"));
-      break;
-    case DEVICE_STATE_Configured:
-      matrix_write_P(&matrix, PSTR("Connected"));
-      break;
-    case DEVICE_STATE_Powered:
-      matrix_write_P(&matrix, PSTR("Powered"));
-      break;
-    case DEVICE_STATE_Default:
-      matrix_write_P(&matrix, PSTR("Default"));
-      break;
-    case DEVICE_STATE_Addressed:
-      matrix_write_P(&matrix, PSTR("Addressed"));
-      break;
-    default:
-      matrix_write_P(&matrix, PSTR("Invalid"));
-  }
-#endif
-
-// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
-
-  char buf[40];
-  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
-  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
-    switch (layer_state) {
-        case _BASE:
-           matrix_write_P(&matrix, PSTR("Default"));
-           break;
-        case _RAISE:
-           matrix_write_P(&matrix, PSTR("Raise"));
-           break;
-        case _LOWER:
-           matrix_write_P(&matrix, PSTR("Lower"));
-           break;
-        case _ADJUST:
-           matrix_write_P(&matrix, PSTR("ADJUST"));
-           break;
-        default:
-           matrix_write(&matrix, buf);
- }
-  
-  // Host Keyboard LED Status
-  char led[40];
-    snprintf(led, sizeof(led), "\n%s  %s  %s",
-            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
-            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
-            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
-  matrix_write(&matrix, led);
-  matrix_update(&display, &matrix);
 }
 
 void iota_gfx_task(void) {
-  render_status_info();
+  iota_gfx_task_user();
 
   if (display.dirty) {
     iota_gfx_flush();

drivers/avr/ssd1306.h

@@ -3,6 +3,71 @@
 
 #include <stdbool.h>
 #include <stdio.h>
+#include "pincontrol.h"
+#include "config.h"
+
+enum ssd1306_cmds {
+  DisplayOff = 0xAE,
+  DisplayOn = 0xAF,
+
+  SetContrast = 0x81,
+  DisplayAllOnResume = 0xA4,
+
+  DisplayAllOn = 0xA5,
+  NormalDisplay = 0xA6,
+  InvertDisplay = 0xA7,
+  SetDisplayOffset = 0xD3,
+  SetComPins = 0xda,
+  SetVComDetect = 0xdb,
+  SetDisplayClockDiv = 0xD5,
+  SetPreCharge = 0xd9,
+  SetMultiPlex = 0xa8,
+  SetLowColumn = 0x00,
+  SetHighColumn = 0x10,
+  SetStartLine = 0x40,
+
+  SetMemoryMode = 0x20,
+  ColumnAddr = 0x21,
+  PageAddr = 0x22,
+
+  ComScanInc = 0xc0,
+  ComScanDec = 0xc8,
+  SegRemap = 0xa0,
+  SetChargePump = 0x8d,
+  ExternalVcc = 0x01,
+  SwitchCapVcc = 0x02,
+
+  ActivateScroll = 0x2f,
+  DeActivateScroll = 0x2e,
+  SetVerticalScrollArea = 0xa3,
+  RightHorizontalScroll = 0x26,
+  LeftHorizontalScroll = 0x27,
+  VerticalAndRightHorizontalScroll = 0x29,
+  VerticalAndLeftHorizontalScroll = 0x2a,
+};
+
+// Controls the SSD1306 128x32 OLED display via i2c
+
+#ifndef SSD1306_ADDRESS
+#define SSD1306_ADDRESS 0x3C
+#endif
+
+#define DisplayHeight 32
+#define DisplayWidth 128
+
+#define FontHeight 8
+#define FontWidth 6
+
+#define MatrixRows (DisplayHeight / FontHeight)
+#define MatrixCols (DisplayWidth / FontWidth)
+
+struct CharacterMatrix {
+  uint8_t display[MatrixRows][MatrixCols];
+  uint8_t *cursor;
+  bool dirty;
+};
+
+struct CharacterMatrix display;
 
 bool iota_gfx_init(void);
 void iota_gfx_task(void);
@@ -14,4 +79,15 @@ void iota_gfx_write(const char *data);
 void iota_gfx_write_P(const char *data);
 void iota_gfx_clear_screen(void);
 
+void iota_gfx_task_user(void);
+
+void matrix_clear(struct CharacterMatrix *matrix);
+void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c);
+void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
+void matrix_write(struct CharacterMatrix *matrix, const char *data);
+void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
+void matrix_render(struct CharacterMatrix *matrix);
+
+
+
 #endif

keyboards/hadron/keymaps/default/config.h

@@ -9,6 +9,7 @@
 
 #define USE_I2C
 #define SSD1306OLED
+#define OLED_ROTATE180
 
 /* ws2812 RGB LED*/
 #define RGB_DI_PIN D4

keyboards/hadron/keymaps/default/keymap.c

@@ -406,3 +406,91 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 
     return MACRO_NONE;
 }
+
+void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER 8
+#define L_RAISE 16
+#define L_FNLAYER 64
+#define L_NUMLAY 128
+#define L_NLOWER 136
+#define L_NFNLAYER 192
+#define L_MOUSECURSOR 256
+#define L_ADJUST 65560
+
+void iota_gfx_task_user(void) {
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  struct CharacterMatrix matrix;
+
+  matrix_clear(&matrix);
+  matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+  switch (USB_DeviceState) {
+    case DEVICE_STATE_Unattached:
+      matrix_write_P(&matrix, PSTR("Unattached"));
+      break;
+    case DEVICE_STATE_Suspended:
+      matrix_write_P(&matrix, PSTR("Suspended"));
+      break;
+    case DEVICE_STATE_Configured:
+      matrix_write_P(&matrix, PSTR("Connected"));
+      break;
+    case DEVICE_STATE_Powered:
+      matrix_write_P(&matrix, PSTR("Powered"));
+      break;
+    case DEVICE_STATE_Default:
+      matrix_write_P(&matrix, PSTR("Default"));
+      break;
+    case DEVICE_STATE_Addressed:
+      matrix_write_P(&matrix, PSTR("Addressed"));
+      break;
+    default:
+      matrix_write_P(&matrix, PSTR("Invalid"));
+  }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+    switch (layer_state) {
+        case L_BASE:
+           matrix_write_P(&matrix, PSTR("Default"));
+           break;
+        case L_RAISE:
+           matrix_write_P(&matrix, PSTR("Raise"));
+           break;
+        case L_LOWER:
+           matrix_write_P(&matrix, PSTR("Lower"));
+           break;
+        case L_ADJUST:
+           matrix_write_P(&matrix, PSTR("ADJUST"));
+           break;
+        default:
+           matrix_write(&matrix, buf);
+ }
+  
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(&matrix, led);
+  matrix_update(&display, &matrix);
+}
+

keyboards/hadron/keymaps/side_numpad/config.h

@@ -9,6 +9,7 @@
 
 #define USE_I2C
 #define SSD1306OLED
+#define OLED_ROTATE180
 
 /* ws2812 RGB LED*/
 #define RGB_DI_PIN D4

keyboards/hadron/keymaps/side_numpad/keymap.c

@@ -416,3 +416,90 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 
     return MACRO_NONE;
 }
+
+void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER 8
+#define L_RAISE 16
+#define L_FNLAYER 64
+#define L_NUMLAY 128
+#define L_NLOWER 136
+#define L_NFNLAYER 192
+#define L_MOUSECURSOR 256
+#define L_ADJUST 65560
+
+void iota_gfx_task_user(void) {
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  struct CharacterMatrix matrix;
+
+  matrix_clear(&matrix);
+  matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+  switch (USB_DeviceState) {
+    case DEVICE_STATE_Unattached:
+      matrix_write_P(&matrix, PSTR("Unattached"));
+      break;
+    case DEVICE_STATE_Suspended:
+      matrix_write_P(&matrix, PSTR("Suspended"));
+      break;
+    case DEVICE_STATE_Configured:
+      matrix_write_P(&matrix, PSTR("Connected"));
+      break;
+    case DEVICE_STATE_Powered:
+      matrix_write_P(&matrix, PSTR("Powered"));
+      break;
+    case DEVICE_STATE_Default:
+      matrix_write_P(&matrix, PSTR("Default"));
+      break;
+    case DEVICE_STATE_Addressed:
+      matrix_write_P(&matrix, PSTR("Addressed"));
+      break;
+    default:
+      matrix_write_P(&matrix, PSTR("Invalid"));
+  }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+    switch (layer_state) {
+        case L_BASE:
+           matrix_write_P(&matrix, PSTR("Default"));
+           break;
+        case L_RAISE:
+           matrix_write_P(&matrix, PSTR("Raise"));
+           break;
+        case L_LOWER:
+           matrix_write_P(&matrix, PSTR("Lower"));
+           break;
+        case L_ADJUST:
+           matrix_write_P(&matrix, PSTR("ADJUST"));
+           break;
+        default:
+           matrix_write(&matrix, buf);
+ }
+  
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(&matrix, led);
+  matrix_update(&display, &matrix);
+}

keyboards/lets_split/keymaps/OLED_sample/config.h

@@ -36,6 +36,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define FLIP_HALF
 
 #define SSD1306OLED
+//#define OLED_ROTATE180
 
 
 #define PREVENT_STUCK_MODIFIERS

keyboards/lets_split/keymaps/OLED_sample/keymap.c

@@ -357,3 +357,91 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 
     return MACRO_NONE;
 }
+
+
+void matrix_update(struct CharacterMatrix *dest,
+                          const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+//assign the right code to your layers for OLED display
+#define L_BASE 0
+#define L_LOWER 8
+#define L_RAISE 16
+#define L_FNLAYER 64
+#define L_NUMLAY 128
+#define L_NLOWER 136
+#define L_NFNLAYER 192
+#define L_MOUSECURSOR 256
+#define L_ADJUST 65560
+
+void iota_gfx_task_user(void) {
+#if DEBUG_TO_SCREEN
+  if (debug_enable) {
+    return;
+  }
+#endif
+
+  struct CharacterMatrix matrix;
+
+  matrix_clear(&matrix);
+  matrix_write_P(&matrix, PSTR("USB: "));
+#ifdef PROTOCOL_LUFA
+  switch (USB_DeviceState) {
+    case DEVICE_STATE_Unattached:
+      matrix_write_P(&matrix, PSTR("Unattached"));
+      break;
+    case DEVICE_STATE_Suspended:
+      matrix_write_P(&matrix, PSTR("Suspended"));
+      break;
+    case DEVICE_STATE_Configured:
+      matrix_write_P(&matrix, PSTR("Connected"));
+      break;
+    case DEVICE_STATE_Powered:
+      matrix_write_P(&matrix, PSTR("Powered"));
+      break;
+    case DEVICE_STATE_Default:
+      matrix_write_P(&matrix, PSTR("Default"));
+      break;
+    case DEVICE_STATE_Addressed:
+      matrix_write_P(&matrix, PSTR("Addressed"));
+      break;
+    default:
+      matrix_write_P(&matrix, PSTR("Invalid"));
+  }
+#endif
+
+// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
+
+  char buf[40];
+  snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
+  matrix_write_P(&matrix, PSTR("\n\nLayer: "));
+    switch (layer_state) {
+        case L_BASE:
+           matrix_write_P(&matrix, PSTR("Default"));
+           break;
+        case L_RAISE:
+           matrix_write_P(&matrix, PSTR("Raise"));
+           break;
+        case L_LOWER:
+           matrix_write_P(&matrix, PSTR("Lower"));
+           break;
+        case L_ADJUST:
+           matrix_write_P(&matrix, PSTR("ADJUST"));
+           break;
+        default:
+           matrix_write(&matrix, buf);
+ }
+  
+  // Host Keyboard LED Status
+  char led[40];
+    snprintf(led, sizeof(led), "\n%s  %s  %s",
+            (host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : "       ",
+            (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : "    ",
+            (host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : "    ");
+  matrix_write(&matrix, led);
+  matrix_update(&display, &matrix);
+}

message.mk

@@ -21,8 +21,8 @@ OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)\n
 ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)\n
 WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)\n
 
-TAB_LOG = printf "\n$$LOG\n\n" | $(AWK) '{ sub(/^/," | "); print }'
+TAB_LOG = printf "\n%s\n\n" "$$LOG" | $(AWK) '{ sub(/^/," | "); print }'
-TAB_LOG_PLAIN = printf "$$LOG\n"
+TAB_LOG_PLAIN = printf "%s\n" "$$LOG"
 AWK_STATUS = $(AWK) '{ printf " %-10s\n", $$1; }'
 AWK_CMD = $(AWK) '{ printf "%-99s", $$0; }'
 PRINT_ERROR = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && $(ON_ERROR)

quantum/keymap_common.c

@@ -169,7 +169,6 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
 }
 
 // translates key to keycode
-__attribute__ ((weak))
 uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
 {
     // Read entire word (16bits)

tests/basic/keymap.c

@@ -40,4 +40,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
         }
     }
     return MACRO_NONE;
-};
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+}

tests/test_common/matrix.c

@@ -58,3 +58,6 @@ void release_key(uint8_t col, uint8_t row) {
 void clear_all_keys(void) {
     memset(matrix, 0, sizeof(matrix));
 }
+
+void led_set(uint8_t usb_led) {
+}

tests/test_common/test_fixture.cpp

@@ -44,8 +44,8 @@ void TestFixture::run_one_scan_loop() {
     advance_time(1);
 }
 
-void TestFixture::idle_for(uint time) {
+void TestFixture::idle_for(unsigned time) {
-    for (uint i=0; i<time; i++) {
+    for (unsigned i=0; i<time; i++) {
         run_one_scan_loop();
     }
 }

tests/test_common/test_fixture.hpp

@@ -26,5 +26,5 @@ public:
     static void TearDownTestCase();
 
     void run_one_scan_loop();
-    void idle_for(uint ms);
+    void idle_for(unsigned ms);
 };

tmk_core/native.mk

@@ -1,3 +1,5 @@
+SYSTEM_TYPE := $(shell gcc -dumpmachine)
+
 CC = gcc
 OBJCOPY = 
 OBJDUMP = 
@@ -14,6 +16,9 @@ COMPILEFLAGS += -funsigned-bitfields
 COMPILEFLAGS += -ffunction-sections
 COMPILEFLAGS += -fdata-sections
 COMPILEFLAGS += -fshort-enums
+ifneq ($(findstring mingw, ${SYSTEM_TYPE}),)
+COMPILEFLAGS += -mno-ms-bitfields
+endif
 
 CFLAGS += $(COMPILEFLAGS)
 CFLAGS += -fno-inline-small-functions

util/activate_msys2.sh

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+function export_variables {
+    local util_dir=~/qmk_utils
+    export PATH=$PATH:$util_dir/dfu-programmer
+    export PATH=$PATH:$util_dir/dfu-util-0.9-win64
+    export PATH=$PATH:$util_dir/flip/bin
+    export PATH=$PATH:$util_dir/avr8-gnu-toolchain/bin
+    export PATH=$PATH:$util_dir/gcc-arm-none-eabi/bin
+}
+
+export_variables
+
+
+
+

util/msys2_install.sh

@@ -0,0 +1,117 @@
+#!/bin/bash
+
+dir=$(cd -P -- "$(dirname -- "$0")" && pwd -P)
+download_dir=~/qmk_utils
+avrtools=avr8-gnu-toolchain
+armtools=gcc-arm-none-eabi
+installflip=false
+
+echo "Installing dependencies needed for the installation (quazip)"
+pacman --needed -S msys/unzip msys/p7zip base-devel msys/git mingw-w64-x86_64-toolchain
+
+source "$dir/win_shared_install.sh"
+
+function install_avr {
+    rm -f -r "$avrtools"
+    wget "http://www.atmel.com/images/avr8-gnu-toolchain-installer-3.5.4.91-win32.any.x86.exe"
+    7z x avr8-gnu-toolchain-installer-3.5.4.91-win32.any.x86.exe
+    rm avr8-gnu-toolchain-installer-3.5.4.91-win32.any.x86.exe
+}
+
+function install_arm {
+    wget -O gcc-arm-none-eabi.zip "https://developer.arm.com/-/media/Files/downloads/gnu-rm/6-2017q2/gcc-arm-none-eabi-6-2017-q2-update-win32.zip?product=GNU%20ARM%20Embedded%20Toolchain,ZIP,,Windows,6-2017-q2-update"
+    unzip -d gcc-arm-none-eabi gcc-arm-none-eabi.zip
+    rm gcc-arm-none-eabi.zip
+}
+
+function extract_flip {
+    rm -f -r flip
+    7z -oflip x FlipInstaller.exe
+}
+
+pushd "$download_dir"
+
+if [ -f "FlipInstaller.exe" ]; then
+    echo
+    echo "Extracting flip"
+    extract_flip
+fi
+
+if [ ! -d "$avrtools" ]; then
+    while true; do
+        echo
+        echo "The AVR toolchain is not installed."
+        echo "This is needed for building AVR based keboards."
+        read -p "Do you want to install it? (Y/N) " res
+        case $res in
+            [Yy]* ) install_avr; break;;
+            [Nn]* ) break;;
+            * ) echo "Invalid answer";;
+        esac
+    done
+else
+    while true; do
+        echo
+        echo "The AVR toolchain is already installed"
+        read -p "Do you want to reinstall? (Y/N) " res
+        case $res in
+            [Yy]* ) install_avr; break;;
+            [Nn]* ) break;;
+            * ) echo "Invalid answer";;
+        esac
+    done
+fi
+
+if [ ! -d "$armtools" ]; then
+    while true; do
+        echo
+        echo "The ARM toolchain is not installed."
+        echo "This is needed for building ARM based keboards."
+        read -p "Do you want to install it? (Y/N) " res
+        case $res in
+            [Yy]* ) install_arm; break;;
+            [Nn]* ) break;;
+            * ) echo "Invalid answer";;
+        esac
+    done
+else
+    while true; do
+        echo
+        echo "The ARM toolchain is already installed"
+        read -p "Do you want to reinstall? (Y/N) " res
+        case $res in
+            [Yy]* ) install_arm; break;;
+            [Nn]* ) break;;
+            * ) echo "Invalid answer";;
+        esac
+    done
+fi
+popd
+
+cp -f "$dir/activate_msys2.sh" "$download_dir/"
+
+if grep "^source ~/qmk_utils/activate_msys2.sh$" ~/.bashrc
+then
+    echo
+    echo "The line source ~/qmk_utils/activate_msys2.sh is already added to your /.bashrc"
+    echo "Not adding it twice!"
+else
+    while true; do
+        echo
+        echo "Do you want to add 'source ~/qmk_utils/activate_msys2.sh' to the end of your"
+        echo ".bashrc file? Without this make won't find the needed utils, so if you don't"
+        echo "want to do it automatically, then you have to do it manually later."
+        read -p "(Y/N)? " res
+        case $res in
+            [Yy]* ) echo "source ~/qmk_utils/activate_msys2.sh" >> ~/.bashrc; break;;
+            [Nn]* ) break;;
+            * ) echo "Invalid answer";;
+        esac
+    done
+fi
+
+echo
+echo "******************************************************************************"
+echo "Installation completed!"
+echo "Please close this Window and restart MSYS2 MinGW"
+echo "******************************************************************************"

util/win_shared_install.sh

@@ -0,0 +1,80 @@
+#!/bin/bash
+
+function install_utils {
+    rm -f -r "$download_dir"
+    mkdir "$download_dir"
+
+    pushd "$download_dir"
+
+    echo "Installing dfu-programmer"
+    wget 'http://downloads.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip'
+    unzip -d dfu-programmer dfu-programmer-win-0.7.2.zip
+
+    echo "Installing dfu-util"
+    wget 'http://dfu-util.sourceforge.net/releases/dfu-util-0.9-win64.zip'
+    unzip dfu-util-0.9-win64.zip
+
+    echo "Installing teensy_loader_cli"
+    wget 'https://www.pjrc.com/teensy/teensy_loader_cli_windows.zip'
+    unzip teensy_loader_cli_windows.zip
+
+    echo "Installing Atmel Flip"
+    wget 'http://www.atmel.com/images/Flip%20Installer%20-%203.4.7.112.exe'
+    mv Flip\ Installer\ \-\ 3.4.7.112.exe FlipInstaller.exe
+
+    echo "Downloading the QMK driver installer"
+    wget -qO- https://api.github.com/repos/qmk/qmk_driver_installer/releases | grep browser_download_url | head -n 1 | cut -d '"' -f 4 | wget -i -
+
+    rm -f *.zip
+
+    popd > /dev/null
+}
+
+function install_drivers {
+    pushd "$download_dir"
+    cp -f "$dir/drivers.txt" .
+    echo 
+    cmd.exe /c "qmk_driver_installer.exe $1 $2 drivers.txt"
+    popd > /dev/null
+}
+
+pushd "$dir"
+
+if [ ! -d "$download_dir" ]; then
+    install_utils
+else
+    while true; do
+        echo
+        echo "The utils seem to already be downloaded."
+        read -p "Do you want to re-download them and update to the newest version (Y/N) " res
+        case $res in
+            [Yy]* ) install_utils; break;;
+            [Nn]* ) break;;
+            * ) echo "Invalid answer";;
+        esac
+    done
+fi
+
+while true; do
+    echo
+    echo "Which USB drivers do you want to install?"
+    echo "(A)all - All supported drivers will be installed"
+    echo "(C)onnected - Only drivers for connected keyboards (in bootloader/flashing mode)"
+    echo "              will be installed"
+    echo "(F)force - Like all, but will also override existing drivers for connected"
+    echo "           keyboards"
+    echo "(N)one - No drivers will be installed,"
+    echo "         flashing your keyboard will most likely not work"
+    read -p "(A/C/F/N)? " res
+    case $res in
+        [Aa]* ) install_drivers --all; break;;
+        [Cc]* ) install_drivers; break;;
+        [Ff]* ) install_drivers --all --force; break;;
+        [Nn]* ) break;;
+        * ) echo "Invalid answer";;
+    esac
+done
+
+
+popd > /dev/null
+

util/wsl_install.sh

@@ -1,44 +1,7 @@
 #!/bin/bash
 
-download_dir=wsl_downloaded
-
-function install_utils {
-    rm -f -r $download_dir
-    mkdir $download_dir
-
-    pushd $download_dir
-
-    echo "Installing dfu-programmer"
-    wget 'http://downloads.sourceforge.net/project/dfu-programmer/dfu-programmer/0.7.2/dfu-programmer-win-0.7.2.zip'
-    unzip -d dfu-programmer dfu-programmer-win-0.7.2.zip
-
-    echo "Installing dfu-util"
-    wget 'http://dfu-util.sourceforge.net/releases/dfu-util-0.9-win64.zip'
-    unzip dfu-util-0.9-win64.zip
-
-    echo "Installing teensy_loader_cli"
-    wget 'https://www.pjrc.com/teensy/teensy_loader_cli_windows.zip'
-    unzip teensy_loader_cli_windows.zip
-
-    echo "Installing Atmel Flip"
-    wget 'http://www.atmel.com/images/Flip%20Installer%20-%203.4.7.112.exe'
-    mv Flip\ Installer\ \-\ 3.4.7.112.exe FlipInstaller.exe
-
-    echo "Downloading the QMK driver installer"
-    wget -qO- https://api.github.com/repos/qmk/qmk_driver_installer/releases | grep browser_download_url | head -n 1 | cut -d '"' -f 4 | wget -i -
-
-    rm -f *.zip
-
-    popd > /dev/null
-}
-
-function install_drivers {
-    pushd $download_dir
-    cmd.exe /C qmk_driver_installer.exe $1 $2 ../drivers.txt
-    popd > /dev/null
-}
-
 dir=$(cd -P -- "$(dirname -- "$0")" && pwd -P)
+pushd "$dir";
 
 if [[ $dir != /mnt/* ]];
 then
@@ -48,7 +11,6 @@ then
     exit 1
 fi
 
-pushd "$dir"
 
 while true; do
     echo
@@ -67,49 +29,25 @@ echo "Installing dependencies needed for the installation (unzip, wget)"
 echo "This will ask for the sudo password"
 sudo apt-get install unzip wget
 
+download_dir=wsl_downloaded
 
-if [ ! -d "$download_dir" ]; then
+source "$dir/win_shared_install.sh"
-    install_utils
-else
-    while true; do
-        echo
-        read -p "The utils seem to already be downloaded, do you want to re-download them and update to the newest version (Y/N) " res
-        case $res in
-            [Yy]* ) install_utils; break;;
-            [Nn]* ) break;;
-            * ) echo "Invalid answer";;
-        esac
-    done
-fi
 
+pushd "$download_dir"
 while true; do
     echo
-    read -p "Flip need to be installed if you want to use that for programming, do you want to install it now? (Y/N) " res
+    echo "Flip need to be installed if you want to use that for programming."
+    echo "Please install it to the default location!"
+    read -p "Do you want to install it now? (Y/N) " res
     case $res in
-        [Yy]* ) cmd.exe /c $download_dir\\FlipInstaller.exe; break;;
+        [Yy]* ) cmd.exe /c FlipInstaller.exe; break;;
         [Nn]* ) break;;
         * ) echo "Invalid answer";;
     esac
 done
+popd
 
 
-while true; do
-    echo
-    echo "Which USB drivers do you want to install?"
-    echo "(A)all - All supported drivers will be installed"
-    echo "(C)onnected - Only drivers for connected keyboards (in bootloader/flashing mode) will be installed"
-    echo "(F)force - Like all, but will also override existing drivers for connected keyboards"
-    echo "(N)one - No drivers will be installed, flashing your keyboard will most likely not work"
-    read -p "(A/C/F/N)? " res
-    case $res in
-        [Aa]* ) install_drivers --all; break;;
-        [Cc]* ) install_drivers; break;;
-        [Ff]* ) install_drivers --all --force; break;;
-        [Nn]* ) break;;
-        * ) echo "Invalid answer";;
-    esac
-done
-
 echo 
 echo "Creating a softlink to the utils directory as ~/qmk_utils."
 echo "This is needed so that the the make system can find all utils it need."
@@ -124,9 +62,9 @@ then
 else
     while true; do
         echo
-        echo "Do you want to add 'source ~/qmk_utils/activate_wsl.sh' to the end of you .bashrc file?"
+        echo "Do you want to add 'source ~/qmk_utils/activate_wsl.sh' to the end of your"
-        echo "Without this make won't find the needed utils, so if you don't want to do it automatically,"
+        echo ".bashrc file? Without this make won't find the needed utils, so if you don't"
-        echo "then you have to do it manually."
+        echo "want to do it automatically, then you have to do it manually later."
         read -p "(Y/N)? " res
         case $res in
             [Yy]* ) echo "source ~/qmk_utils/activate_wsl.sh" >> ~/.bashrc; break;;
@@ -138,9 +76,10 @@ fi
 
 while true; do
     echo
-    echo "Do you want to add a symlink to the QMK repository in your home directory for convenience?"
+    echo "Do you want to add a symlink to the QMK repository in your home directory for"
-    echo "This will create a folder 'qmk_firmware' in your home directory."
+    echo "convenience? This will create a folder 'qmk_firmware' in your home directory."
-    echo "In the future you can use this folder instead of the full path on your windows file system"
+    echo "In the future you can use this folder instead of the full path on your Windows"
+    echo "file system."
     read -p "(Y/N)? " res
     case $res in
         [Yy]* ) ln -sfn "$dir/.." ~/qmk_firmware; break;;
@@ -156,4 +95,3 @@ echo "You need to open a new batch command prompt for all the utils to work prop
 echo "******************************************************************************"
 
 popd > /dev/null
-