Add template board files

This introduces a grep dependency, which I believe we didn't have
before, but it should be available and installed by default on all the
supported systems.

.gitignore

@@ -32,7 +32,9 @@ CMakeLists.txt
 .browse.VC.db*
 *.stackdump
 util/Win_Check_Output.txt
-.vscode
+# Let these ones be user specific, since we have so many different configurations
+.vscode/launch.json
+.vscode/tasks.json
 .stfolder
 
 # ignore image files

.vscode/settings.json

@@ -0,0 +1,14 @@
+// Place your settings in this file to overwrite default and user settings.
+{
+    // Configure glob patterns for excluding files and folders.
+    "files.exclude": {
+        "**/.build": true,
+        "**/*.hex": true
+    },
+    "files.associations": {
+        "*.h": "c",
+        "*.c": "c",
+        "*.cpp": "cpp",
+        "*.hpp": "cpp"
+    }
+}

Makefile

@@ -483,6 +483,8 @@ define RUN_TEST
 +error_occurred=0;\
 $($(TEST)_COMMAND)\
 if [ $$error_occurred -gt 0 ]; then $(HANDLE_ERROR); fi;
+
+
 endef
 
 # Allow specifying just the subproject, in the keyboard directory, which will compile all keymaps

build_full_test.mk

@@ -18,13 +18,15 @@
 TEST_PATH=tests/$(TEST)
 
 $(TEST)_SRC= \
-	$(TEST_PATH)/test.cpp \
+	$(TEST_PATH)/keymap.c \
 	$(TMK_COMMON_SRC) \
 	$(QUANTUM_SRC) \
 	tests/test_common/matrix.c \
 	tests/test_common/test_driver.cpp \
 	tests/test_common/keyboard_report_util.cpp \
 	tests/test_common/test_fixture.cpp
+$(TEST)_SRC += $(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp))
+
 $(TEST)_DEFS=$(TMK_COMMON_DEFS)
 $(TEST)_CONFIG=$(TEST_PATH)/config.h
-VPATH+=$(TOP_DIR)/tests/test_common
+VPATH+=$(TOP_DIR)/tests/test_common

drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h

@@ -22,9 +22,6 @@ static const I2CConfig i2ccfg = {
   400000 // clock speed (Hz); 400kHz max for IS31
 };
 
-#define GDISP_SCREEN_WIDTH  7
-#define GDISP_SCREEN_HEIGHT 7
-
 static const uint8_t led_mask[] = {
 	0xFF, 0x00, /* C1-1 -> C1-16 */
 	0xFF, 0x00, /* C2-1 -> C2-16 */

drivers/ugfx/gdisp/is31fl3731c/driver.mk

@@ -0,0 +1,3 @@
+GFXINC += drivers/ugfx/gdisp/is31fl3731c
+GFXSRC += drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
+GDISP_DRIVER_LIST += GDISPVMT_IS31FL3731C_QMK

drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c

@@ -19,11 +19,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #if GFX_USE_GDISP
 
-#define GDISP_DRIVER_VMT			GDISPVMT_IS31FL3731C_ERGODOX
+#define GDISP_DRIVER_VMT          GDISPVMT_IS31FL3731C_QMK
-#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h"
+#define GDISP_SCREEN_HEIGHT       LED_HEIGHT
+#define GDISP_SCREEN_WIDTH        LED_WIDTH
+
+#include "gdisp_lld_config.h"
 #include "src/gdisp/gdisp_driver.h"
 
-#include "board_IS31FL3731C.h"
+#include "board_is31fl3731c.h"
 
 
 // Can't include led_tables from here
@@ -33,27 +36,21 @@ extern const uint8_t CIE1931_CURVE[];
 /* Driver local definitions.                                                 */
 /*===========================================================================*/
 
-#ifndef GDISP_SCREEN_HEIGHT
-	#define GDISP_SCREEN_HEIGHT		9
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-	#define GDISP_SCREEN_WIDTH		16
-#endif
 #ifndef GDISP_INITIAL_CONTRAST
-	#define GDISP_INITIAL_CONTRAST	0
+    #define GDISP_INITIAL_CONTRAST    0
 #endif
 #ifndef GDISP_INITIAL_BACKLIGHT
-	#define GDISP_INITIAL_BACKLIGHT	0
+    #define GDISP_INITIAL_BACKLIGHT   0
 #endif
 
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
+#define GDISP_FLG_NEEDFLUSH           (GDISP_FLG_DRIVER<<0)
 
 #define IS31_ADDR_DEFAULT 0x74
 
-#define IS31_REG_CONFIG  0x00
+#define IS31_REG_CONFIG   0x00
 // bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE 0x00
+#define IS31_REG_CONFIG_PICTUREMODE   0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
+#define IS31_REG_CONFIG_AUTOPLAYMODE  0x08
 #define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
 // D2:D0 bits are starting frame for autoplay mode
 
@@ -100,7 +97,6 @@ extern const uint8_t CIE1931_CURVE[];
 #define IS31_PWM_SIZE 0x90
 
 #define IS31_LED_MASK_SIZE 0x12
-#define IS31_SCREEN_WIDTH 16
 
 #define IS31
 
@@ -144,14 +140,14 @@ static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint
 }
 
 LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-	// The private area is the display surface.
+    // The private area is the display surface.
-	g->priv = gfxAlloc(sizeof(PrivData));
+    g->priv = gfxAlloc(sizeof(PrivData));
     __builtin_memset(PRIV(g), 0, sizeof(PrivData));
-	PRIV(g)->page = 0;
+    PRIV(g)->page = 0;
 
-	// Initialise the board interface
+    // Initialise the board interface
-	init_board(g);
+    init_board(g);
-	gfxSleepMilliseconds(10);
+    gfxSleepMilliseconds(10);
 
     // zero function page, all registers (assuming full_page is all zeroes)
     write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
@@ -179,134 +175,134 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     // Finish Init
     post_init_board(g);
 
-	/* Initialise the GDISP structure */
+    /* Initialise the GDISP structure */
-	g->g.Width = GDISP_SCREEN_WIDTH;
+    g->g.Width = GDISP_SCREEN_WIDTH;
-	g->g.Height = GDISP_SCREEN_HEIGHT;
+    g->g.Height = GDISP_SCREEN_HEIGHT;
-	g->g.Orientation = GDISP_ROTATE_0;
+    g->g.Orientation = GDISP_ROTATE_0;
-	g->g.Powermode = powerOff;
+    g->g.Powermode = powerOff;
-	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
+    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-	g->g.Contrast = GDISP_INITIAL_CONTRAST;
+    g->g.Contrast = GDISP_INITIAL_CONTRAST;
-	return TRUE;
+    return TRUE;
 }
 
 #if GDISP_HARDWARE_FLUSH
-	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+    LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-		// Don't flush if we don't need it.
+        // Don't flush if we don't need it.
-		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
+        if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-			return;
+            return;
 
-		PRIV(g)->page++;
+        PRIV(g)->page++;
-		PRIV(g)->page %= 2;
+        PRIV(g)->page %= 2;
-		// TODO: some smarter algorithm for this
+        // TODO: some smarter algorithm for this
-		// We should run only one physical page at a time
+        // We should run only one physical page at a time
-		// This way we don't need to send so much data, and
+        // This way we don't need to send so much data, and
-		// we could use slightly less memory
+        // we could use slightly less memory
-		uint8_t* src = PRIV(g)->frame_buffer;
+        uint8_t* src = PRIV(g)->frame_buffer;
-		for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
+        for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
-		    for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
+            for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
-		        uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
+                uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
-		        PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
+                PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
-		        ++src;
+                ++src;
-		    }
+            }
-		}
+        }
         write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
         gfxSleepMilliseconds(1);
         write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
 
-		g->flags &= ~GDISP_FLG_NEEDFLUSH;
+        g->flags &= ~GDISP_FLG_NEEDFLUSH;
-	}
+    }
 #endif
 
 #if GDISP_HARDWARE_DRAWPIXEL
-	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+    LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-		coord_t		x, y;
+        coord_t        x, y;
 
-		switch(g->g.Orientation) {
+        switch(g->g.Orientation) {
-		default:
+        default:
-		case GDISP_ROTATE_0:
+        case GDISP_ROTATE_0:
-			x = g->p.x;
+            x = g->p.x;
-			y = g->p.y;
+            y = g->p.y;
-			break;
+            break;
-		case GDISP_ROTATE_180:
+        case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+            x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
+            y = g->p.y;
-			break;
+            break;
-		}
+        }
-		PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
+        PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
-		g->flags |= GDISP_FLG_NEEDFLUSH;
+        g->flags |= GDISP_FLG_NEEDFLUSH;
-	}
+    }
 #endif
 
 #if GDISP_HARDWARE_PIXELREAD
-	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+    LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-		coord_t		x, y;
+        coord_t        x, y;
 
-		switch(g->g.Orientation) {
+        switch(g->g.Orientation) {
-		default:
+        default:
-		case GDISP_ROTATE_0:
+        case GDISP_ROTATE_0:
-			x = g->p.x;
+            x = g->p.x;
-			y = g->p.y;
+            y = g->p.y;
-			break;
+            break;
-		case GDISP_ROTATE_180:
+        case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+            x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
+            y = g->p.y;
-			break;
+            break;
-		}
+        }
-		return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
+        return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
-	}
+    }
 #endif
 
 #if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-	LLDSPEC void gdisp_lld_control(GDisplay *g) {
+    LLDSPEC void gdisp_lld_control(GDisplay *g) {
-		switch(g->p.x) {
+        switch(g->p.x) {
-		case GDISP_CONTROL_POWER:
+        case GDISP_CONTROL_POWER:
-			if (g->g.Powermode == (powermode_t)g->p.ptr)
+            if (g->g.Powermode == (powermode_t)g->p.ptr)
-				return;
-			switch((powermode_t)g->p.ptr) {
-			case powerOff:
-			case powerSleep:
-			case powerDeepSleep:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-				break;
-			case powerOn:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-				break;
-			default:
-				return;
-			}
-			g->g.Powermode = (powermode_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_ORIENTATION:
-			if (g->g.Orientation == (orientation_t)g->p.ptr)
-				return;
-			switch((orientation_t)g->p.ptr) {
-			/* Rotation is handled by the drawing routines */
-			case GDISP_ROTATE_0:
-			case GDISP_ROTATE_180:
-				g->g.Height = GDISP_SCREEN_HEIGHT;
-				g->g.Width = GDISP_SCREEN_WIDTH;
-				break;
-			case GDISP_ROTATE_90:
-			case GDISP_ROTATE_270:
-				g->g.Height = GDISP_SCREEN_WIDTH;
-				g->g.Width = GDISP_SCREEN_HEIGHT;
-				break;
-			default:
-				return;
-			}
-			g->g.Orientation = (orientation_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_BACKLIGHT:
-		    if (g->g.Backlight == (unsigned)g->p.ptr)
                 return;
-		    unsigned val = (unsigned)g->p.ptr;
+            switch((powermode_t)g->p.ptr) {
-		    g->g.Backlight = val > 100 ? 100 : val;
+            case powerOff:
+            case powerSleep:
+            case powerDeepSleep:
+                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+                break;
+            case powerOn:
+                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+                break;
+            default:
+                return;
+            }
+            g->g.Powermode = (powermode_t)g->p.ptr;
+            return;
+
+        case GDISP_CONTROL_ORIENTATION:
+            if (g->g.Orientation == (orientation_t)g->p.ptr)
+                return;
+            switch((orientation_t)g->p.ptr) {
+            /* Rotation is handled by the drawing routines */
+            case GDISP_ROTATE_0:
+            case GDISP_ROTATE_180:
+                g->g.Height = GDISP_SCREEN_HEIGHT;
+                g->g.Width = GDISP_SCREEN_WIDTH;
+                break;
+            case GDISP_ROTATE_90:
+            case GDISP_ROTATE_270:
+                g->g.Height = GDISP_SCREEN_WIDTH;
+                g->g.Width = GDISP_SCREEN_HEIGHT;
+                break;
+            default:
+                return;
+            }
+            g->g.Orientation = (orientation_t)g->p.ptr;
+            return;
+
+        case GDISP_CONTROL_BACKLIGHT:
+            if (g->g.Backlight == (unsigned)g->p.ptr)
+                return;
+            unsigned val = (unsigned)g->p.ptr;
+            g->g.Backlight = val > 100 ? 100 : val;
             g->flags |= GDISP_FLG_NEEDFLUSH;
-		    return;
+            return;
-		}
+        }
-	}
+    }
 #endif // GDISP_NEED_CONTROL
 
 #endif // GFX_USE_GDISP

drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h

@@ -24,13 +24,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Driver hardware support.                                                  */
 /*===========================================================================*/
 
-#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
+#define GDISP_HARDWARE_FLUSH            TRUE        // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL		TRUE
+#define GDISP_HARDWARE_DRAWPIXEL        TRUE
-#define GDISP_HARDWARE_PIXELREAD		TRUE
+#define GDISP_HARDWARE_PIXELREAD        TRUE
-#define GDISP_HARDWARE_CONTROL			TRUE
+#define GDISP_HARDWARE_CONTROL          TRUE
 
-#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_GRAY256
+#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_GRAY256
 
-#endif	/* GFX_USE_GDISP */
+#endif    /* GFX_USE_GDISP */
 
-#endif	/* _GDISP_LLD_CONFIG_H */
+#endif    /* _GDISP_LLD_CONFIG_H */

drivers/ugfx/gdisp/st7565/board_st7565_template.h

@@ -83,7 +83,7 @@ static GFXINLINE void init_board(GDisplay *g) {
 }
 
 static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
+    (void) g;
 }
 
 static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
@@ -106,8 +106,8 @@ static GFXINLINE void enter_cmd_mode(GDisplay *g) {
 
 
 static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
+    (void) g;
-	spiSend(&SPID1, length, data);
+    spiSend(&SPID1, length, data);
 }
 
 #endif /* _GDISP_LLD_BOARD_H */

drivers/ugfx/gdisp/st7565/driver.mk

@@ -0,0 +1,3 @@
+GFXINC += drivers/ugfx/gdisp/st7565
+GFXSRC += drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
+GDISP_DRIVER_LIST += GDISPVMT_ST7565_QMK

drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c

@@ -9,35 +9,35 @@
 
 #if GFX_USE_GDISP
 
-#define GDISP_DRIVER_VMT			GDISPVMT_ST7565_ERGODOX
+#define GDISP_DRIVER_VMT            GDISPVMT_ST7565_QMK
-#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h"
+#include "gdisp_lld_config.h"
 #include "src/gdisp/gdisp_driver.h"
 
-#include "board_ST7565.h"
+#include "board_st7565.h"
 
 /*===========================================================================*/
 /* Driver local definitions.                                                 */
 /*===========================================================================*/
 
 #ifndef GDISP_SCREEN_HEIGHT
-#define GDISP_SCREEN_HEIGHT		32
+#define GDISP_SCREEN_HEIGHT         LCD_HEIGHT
 #endif
 #ifndef GDISP_SCREEN_WIDTH
-#define GDISP_SCREEN_WIDTH		128
+#define GDISP_SCREEN_WIDTH          LCD_WIDTH
 #endif
 #ifndef GDISP_INITIAL_CONTRAST
-#define GDISP_INITIAL_CONTRAST	35
+#define GDISP_INITIAL_CONTRAST      35
 #endif
 #ifndef GDISP_INITIAL_BACKLIGHT
-#define GDISP_INITIAL_BACKLIGHT	100
+#define GDISP_INITIAL_BACKLIGHT     100
 #endif
 
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
+#define GDISP_FLG_NEEDFLUSH         (GDISP_FLG_DRIVER<<0)
 
-#include "drivers/gdisp/st7565ergodox/st7565.h"
+#include "st7565.h"
 
 /*===========================================================================*/
-/* Driver config defaults for backward compatibility.               	     */
+/* Driver config defaults for backward compatibility.                        */
 /*===========================================================================*/
 #ifndef ST7565_LCD_BIAS
 #define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
@@ -65,7 +65,7 @@ typedef struct{
 
 // Some common routines and macros
 #define PRIV(g)                         ((PrivData*)g->priv)
-#define RAM(g)							(PRIV(g)->ram)
+#define RAM(g)                          (PRIV(g)->ram)
 
 static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
     PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
@@ -76,15 +76,15 @@ static GFXINLINE void flush_cmd(GDisplay* g) {
     PRIV(g)->data_pos = 0;
 }
 
-#define write_cmd2(g, cmd1, cmd2)		{ write_cmd(g, cmd1); write_cmd(g, cmd2); }
+#define write_cmd2(g, cmd1, cmd2)        { write_cmd(g, cmd1); write_cmd(g, cmd2); }
-#define write_cmd3(g, cmd1, cmd2, cmd3)	{ write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
+#define write_cmd3(g, cmd1, cmd2, cmd3)  { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
 
 // Some common routines and macros
-#define delay(us)			gfxSleepMicroseconds(us)
+#define delay(us)           gfxSleepMicroseconds(us)
-#define delay_ms(ms)		gfxSleepMilliseconds(ms)
+#define delay_ms(ms)        gfxSleepMilliseconds(ms)
 
-#define xyaddr(x, y)		((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
+#define xyaddr(x, y)        ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
-#define xybit(y)			(1<<((y)&7))
+#define xybit(y)            (1<<((y)&7))
 
 /*===========================================================================*/
 /* Driver exported functions.                                                */
@@ -150,7 +150,7 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
 
 #if GDISP_HARDWARE_FLUSH
 LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-    unsigned	p;
+    unsigned    p;
 
     // Don't flush if we don't need it.
     if (!(g->flags & GDISP_FLG_NEEDFLUSH))
@@ -181,7 +181,7 @@ LLDSPEC void gdisp_lld_flush(GDisplay *g) {
 
 #if GDISP_HARDWARE_DRAWPIXEL
 LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-    coord_t		x, y;
+    coord_t        x, y;
 
     switch(g->g.Orientation) {
     default:
@@ -212,7 +212,7 @@ LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
 
 #if GDISP_HARDWARE_PIXELREAD
 LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-    coord_t		x, y;
+    coord_t        x, y;
 
     switch(g->g.Orientation) {
     default:
@@ -257,7 +257,7 @@ LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
             else {
                 *dst &= ~xybit(dsty);
             }
-			dstx++;
+            dstx++;
             srcbit++;
         }
     }

drivers/ugfx/gdisp/st7565/gdisp_lld_config.h

@@ -14,7 +14,7 @@
 /* Driver hardware support.                                                  */
 /*===========================================================================*/
 
-#define GDISP_HARDWARE_FLUSH            TRUE		// This controller requires flushing
+#define GDISP_HARDWARE_FLUSH            TRUE        // This controller requires flushing
 #define GDISP_HARDWARE_DRAWPIXEL        TRUE
 #define GDISP_HARDWARE_PIXELREAD        TRUE
 #define GDISP_HARDWARE_CONTROL          TRUE
@@ -22,6 +22,6 @@
 
 #define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_MONO
 
-#endif	/* GFX_USE_GDISP */
+#endif    /* GFX_USE_GDISP */
 
-#endif	/* _GDISP_LLD_CONFIG_H */
+#endif    /* _GDISP_LLD_CONFIG_H */

keyboards/ergodox/infinity/board_is31fl3731c.h

@@ -0,0 +1,110 @@
+/*
+Copyright 2016 Fred Sundvik <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+static const I2CConfig i2ccfg = {
+  400000 // clock speed (Hz); 400kHz max for IS31
+};
+
+static const uint8_t led_mask[] = {
+	0xFF, 0x00, /* C1-1 -> C1-16 */
+	0xFF, 0x00, /* C2-1 -> C2-16 */
+	0xFF, 0x00, /* C3-1 -> C3-16 */
+	0xFF, 0x00, /* C4-1 -> C4-16 */
+	0x3F, 0x00, /* C5-1 -> C5-16 */
+	0x00, 0x00, /* C6-1 -> C6-16 */
+	0x00, 0x00, /* C7-1 -> C7-16 */
+	0x00, 0x00, /* C8-1 -> C8-16 */
+	0x00, 0x00, /* C9-1 -> C9-16 */
+};
+
+// The address of the LED
+#define LA(c, r) (c + r * 16 )
+// Need to be an address that is not mapped, but inside the range of the controller matrix
+#define NA LA(8, 8)
+
+// The numbers in the comments are the led numbers DXX on the PCB
+// The mapping is taken from the schematic of left hand side
+static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
+//   45        44        43        42        41        40        39
+   { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
+//   52        51        50        49        48        47        46
+   { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
+//   58        57        56        55        54        53        N/A
+   { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
+//   67        66        65        64        63        62        61
+   { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
+//   76        75        74        73        72        60        59
+   { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
+//   N/A       N/A       N/A       N/A       N/A       N/A       68
+   { NA,       NA,       NA,       NA,       NA,       NA,       LA(5, 4) },
+//   N/A       N/A       N/A       N/A       71        70        69
+   { NA,       NA,       NA,       NA,       LA(6, 2), LA(6, 1), LA(6, 0) },
+};
+
+
+#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_TIMEOUT 5000
+
+static GFXINLINE void init_board(GDisplay *g) {
+    (void) g;
+    /* I2C pins */
+    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
+    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
+    palClearPad(GPIOB, 16);
+    /* start I2C */
+    i2cStart(&I2CD1, &i2ccfg);
+    // try high drive (from kiibohd)
+    I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
+    // try glitch fixing (from kiibohd)
+    I2CD1.i2c->FLT = 4;
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+	(void) g;
+}
+
+static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
+    (void) g;
+    return led_mask;
+}
+
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
+{
+    (void) g;
+    return led_mapping[y][x];
+}
+
+static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
+    (void) g;
+    if(!shutdown) {
+        palSetPad(GPIOB, 16);
+    }
+    else {
+        palClearPad(GPIOB, 16);
+    }
+}
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+	(void) g;
+	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+}
+
+#endif /* _GDISP_LLD_BOARD_H */

keyboards/ergodox/infinity/board_st7565.h

@@ -0,0 +1,113 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
+#define ST7565_ADC              ST7565_ADC_NORMAL
+#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
+#define ST7565_PAGE_ORDER       0,1,2,3
+/*
+ * Custom page order for several LCD boards, e.g. HEM12864-99
+ * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
+ */
+
+#define ST7565_GPIOPORT GPIOC
+#define ST7565_PORT PORTC
+#define ST7565_A0_PIN 7
+#define ST7565_RST_PIN 8
+#define ST7565_MOSI_PIN 6
+#define ST7565_SLCK_PIN 5
+#define ST7565_SS_PIN 4
+
+#define palSetPadModeRaw(portname, bits) \
+    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+
+#define palSetPadModeNamed(portname, portmode) \
+    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+
+#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
+// DSPI Clock and Transfer Attributes
+// Frame Size: 8 bits
+// MSB First
+// CLK Low by default
+static const SPIConfig spi1config = {
+   // Operation complete callback or @p NULL.
+  .end_cb = NULL,
+   //The chip select line port - when not using pcs.
+  .ssport = ST7565_GPIOPORT,
+   // brief The chip select line pad number - when not using pcs.
+  .sspad=ST7565_SS_PIN,
+   // SPI initialization data.
+  .tar0 =
+    SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
+    | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
+    | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
+    | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
+    | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
+    | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
+};
+
+static GFXINLINE void acquire_bus(GDisplay *g) {
+    (void) g;
+    // Only the LCD is using the SPI bus, so no need to acquire
+    // spiAcquireBus(&SPID1);
+    spiSelect(&SPID1);
+}
+
+static GFXINLINE void release_bus(GDisplay *g) {
+    (void) g;
+    // Only the LCD is using the SPI bus, so no need to release
+    //spiReleaseBus(&SPID1);
+    spiUnselect(&SPID1);
+}
+
+static GFXINLINE void init_board(GDisplay *g) {
+    (void) g;
+    palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+    palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
+    palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
+    palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
+
+    spiInit();
+    spiStart(&SPID1, &spi1config);
+    release_bus(g);
+}
+
+static GFXINLINE void post_init_board(GDisplay *g) {
+    (void) g;
+}
+
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
+    (void) g;
+    if (state) {
+        palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
+    else {
+        palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
+    }
+}
+
+static GFXINLINE void enter_data_mode(GDisplay *g) {
+    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+static GFXINLINE void enter_cmd_mode(GDisplay *g) {
+    palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
+}
+
+
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+    (void) g;
+    spiSend(&SPID1, length, data);
+}
+
+#endif /* _GDISP_LLD_BOARD_H */

keyboards/ergodox/infinity/config.h

@@ -51,16 +51,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define SERIAL_LINK_BAUD 562500
 #define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1)
-// The visualizer needs gfx thread priorities
-#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)
 
 #define VISUALIZER_USER_DATA_SIZE 16
 
-#define LCD_DISPLAY_NUMBER 0
-#define LED_DISPLAY_NUMBER 1
-
-#define LED_NUM_ROWS 7
-#define LED_NUM_COLS 7
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/ergodox/infinity/drivers/gdisp/IS31FL3731C/driver.mk

@@ -1,2 +0,0 @@
-GFXINC += drivers/gdisp/IS31FL3731C
-GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c

keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk

@@ -1,2 +0,0 @@
-GFXINC += drivers/gdisp/st7565ergodox
-GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c

keyboards/ergodox/infinity/gfxconf.h

@@ -22,310 +22,6 @@
 #ifndef _GFXCONF_H
 #define _GFXCONF_H
 
-
+#include "common_gfxconf.h"
-///////////////////////////////////////////////////////////////////////////
-// GOS - One of these must be defined, preferably in your Makefile       //
-///////////////////////////////////////////////////////////////////////////
-//#define GFX_USE_OS_CHIBIOS                           TRUE
-//#define GFX_USE_OS_FREERTOS                          FALSE
-//    #define GFX_FREERTOS_USE_TRACE                   FALSE
-//#define GFX_USE_OS_WIN32                             FALSE
-//#define GFX_USE_OS_LINUX                             FALSE
-//#define GFX_USE_OS_OSX                               FALSE
-//#define GFX_USE_OS_ECOS                              FALSE
-//#define GFX_USE_OS_RAWRTOS                           FALSE
-//#define GFX_USE_OS_ARDUINO                           FALSE
-//#define GFX_USE_OS_KEIL                              FALSE
-//#define GFX_USE_OS_CMSIS                             FALSE
-//#define GFX_USE_OS_RAW32                             FALSE
-//    #define INTERRUPTS_OFF()                         optional_code
-//    #define INTERRUPTS_ON()                          optional_code
-// These are not defined by default for some reason
-#define GOS_NEED_X_THREADS	FALSE
-#define GOS_NEED_X_HEAP		FALSE
-
-// Options that (should where relevant) apply to all operating systems
-    #define GFX_NO_INLINE                            FALSE
-//    #define GFX_COMPILER                             GFX_COMPILER_UNKNOWN
-//    #define GFX_CPU                                  GFX_CPU_UNKNOWN
-//    #define GFX_OS_HEAP_SIZE                         0
-//    #define GFX_OS_NO_INIT                           FALSE
-//    #define GFX_OS_INIT_NO_WARNING                   FALSE
-//    #define GFX_OS_PRE_INIT_FUNCTION                 myHardwareInitRoutine
-//    #define GFX_OS_EXTRA_INIT_FUNCTION               myOSInitRoutine
-//    #define GFX_OS_EXTRA_DEINIT_FUNCTION             myOSDeInitRoutine
-
-
-///////////////////////////////////////////////////////////////////////////
-// GDISP                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GDISP                                TRUE
-
-//#define GDISP_NEED_AUTOFLUSH                         FALSE
-//#define GDISP_NEED_TIMERFLUSH                        FALSE
-//#define GDISP_NEED_VALIDATION                        TRUE
-//#define GDISP_NEED_CLIP                              TRUE
-#define GDISP_NEED_CIRCLE                            TRUE
-#define GDISP_NEED_ELLIPSE                           TRUE
-#define GDISP_NEED_ARC                               TRUE
-#define GDISP_NEED_ARCSECTORS                        TRUE
-#define GDISP_NEED_CONVEX_POLYGON                    TRUE
-//#define GDISP_NEED_SCROLL                            FALSE
-#define GDISP_NEED_PIXELREAD                         TRUE
-#define GDISP_NEED_CONTROL                           TRUE
-//#define GDISP_NEED_QUERY                             FALSE
-//#define GDISP_NEED_MULTITHREAD                       FALSE
-//#define GDISP_NEED_STREAMING                         FALSE
-#define GDISP_NEED_TEXT                              TRUE
-//    #define GDISP_NEED_TEXT_WORDWRAP                 FALSE
-//    #define GDISP_NEED_ANTIALIAS                     FALSE
-//    #define GDISP_NEED_UTF8                          FALSE
-    #define GDISP_NEED_TEXT_KERNING                  TRUE
-//    #define GDISP_INCLUDE_FONT_UI1                   FALSE
-//    #define GDISP_INCLUDE_FONT_UI2                   FALSE		// The smallest preferred font.
-//    #define GDISP_INCLUDE_FONT_LARGENUMBERS          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS10          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32          FALSE
-    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12      TRUE
-//    #define GDISP_INCLUDE_FONT_FIXED_10X20           FALSE
-//    #define GDISP_INCLUDE_FONT_FIXED_7X14            FALSE
-    #define GDISP_INCLUDE_FONT_FIXED_5X8             TRUE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA   FALSE
-//    #define GDISP_INCLUDE_USER_FONTS                 FALSE
-
-//#define GDISP_NEED_IMAGE                             FALSE
-//    #define GDISP_NEED_IMAGE_NATIVE                  FALSE
-//    #define GDISP_NEED_IMAGE_GIF                     FALSE
-//    #define GDISP_NEED_IMAGE_BMP                     FALSE
-//        #define GDISP_NEED_IMAGE_BMP_1               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_4               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_4_RLE           FALSE
-//        #define GDISP_NEED_IMAGE_BMP_8               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_8_RLE           FALSE
-//        #define GDISP_NEED_IMAGE_BMP_16              FALSE
-//        #define GDISP_NEED_IMAGE_BMP_24              FALSE
-//        #define GDISP_NEED_IMAGE_BMP_32              FALSE
-//    #define GDISP_NEED_IMAGE_JPG                     FALSE
-//    #define GDISP_NEED_IMAGE_PNG                     FALSE
-//    #define GDISP_NEED_IMAGE_ACCOUNTING              FALSE
-#ifdef EMULATOR
-#define GDISP_NEED_PIXMAP                            TRUE
-#endif
-//    #define GDISP_NEED_PIXMAP_IMAGE                  FALSE
-
-//#define GDISP_DEFAULT_ORIENTATION                    GDISP_ROTATE_LANDSCAPE    // If not defined the native hardware orientation is used.
-//#define GDISP_LINEBUF_SIZE                           128
-//#define GDISP_STARTUP_COLOR                          Black
-#define GDISP_NEED_STARTUP_LOGO                      FALSE
-
-//#define GDISP_TOTAL_DISPLAYS		                 2
-
-#ifndef EMULATOR
-#define GDISP_DRIVER_LIST                            GDISPVMT_ST7565_ERGODOX, GDISPVMT_IS31FL3731C_ERGODOX
-#else
-#define GDISP_DRIVER_LIST                            GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX
-#endif
-
-    #ifdef GDISP_DRIVER_LIST
-        // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
-        #define GDISP_HARDWARE_STREAM_WRITE          FALSE
-        #define GDISP_HARDWARE_STREAM_READ           FALSE
-        #define GDISP_HARDWARE_STREAM_POS            FALSE
-        #define GDISP_HARDWARE_DRAWPIXEL             TRUE
-        #define GDISP_HARDWARE_CLEARS                FALSE
-        #define GDISP_HARDWARE_FILLS                 FALSE
-        //#define GDISP_HARDWARE_BITFILLS              FALSE
-        #define GDISP_HARDWARE_SCROLL                FALSE
-        #define GDISP_HARDWARE_PIXELREAD             TRUE
-        #define GDISP_HARDWARE_CONTROL               TRUE
-        #define GDISP_HARDWARE_QUERY                 FALSE
-        #define GDISP_HARDWARE_CLIP                  FALSE
-
-        #define GDISP_PIXELFORMAT                    GDISP_PIXELFORMAT_RGB888
-    #endif
-
-// The custom format is not defined for some reason, so define it as error
-// so we don't get compiler warnings
-#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR
-
-#define GDISP_USE_GFXNET                             FALSE
-//    #define GDISP_GFXNET_PORT                        13001
-//    #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP         FALSE
-//    #define GDISP_DONT_WAIT_FOR_NET_DISPLAY          FALSE
-//    #define GDISP_GFXNET_UNSAFE_SOCKETS              FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GWIN                                                                  //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GWIN                                 FALSE
-
-//#define GWIN_NEED_WINDOWMANAGER                      FALSE
-//    #define GWIN_REDRAW_IMMEDIATE                    FALSE
-//    #define GWIN_REDRAW_SINGLEOP                     FALSE
-//    #define GWIN_NEED_FLASHING                       FALSE
-//        #define GWIN_FLASHING_PERIOD                 250
-
-//#define GWIN_NEED_CONSOLE                            FALSE
-//    #define GWIN_CONSOLE_USE_HISTORY                 FALSE
-//        #define GWIN_CONSOLE_HISTORY_AVERAGING       FALSE
-//        #define GWIN_CONSOLE_HISTORY_ATCREATE        FALSE
-//    #define GWIN_CONSOLE_ESCSEQ                      FALSE
-//    #define GWIN_CONSOLE_USE_BASESTREAM              FALSE
-//    #define GWIN_CONSOLE_USE_FLOAT                   FALSE
-//#define GWIN_NEED_GRAPH                              FALSE
-//#define GWIN_NEED_GL3D                               FALSE
-
-//#define GWIN_NEED_WIDGET                             FALSE
-//#define GWIN_FOCUS_HIGHLIGHT_WIDTH                   1
-//    #define GWIN_NEED_LABEL                          FALSE
-//        #define GWIN_LABEL_ATTRIBUTE                 FALSE
-//    #define GWIN_NEED_BUTTON                         FALSE
-//        #define GWIN_BUTTON_LAZY_RELEASE             FALSE
-//    #define GWIN_NEED_SLIDER                         FALSE
-//        #define GWIN_SLIDER_NOSNAP                   FALSE
-//        #define GWIN_SLIDER_DEAD_BAND                5
-//        #define GWIN_SLIDER_TOGGLE_INC               20
-//    #define GWIN_NEED_CHECKBOX                       FALSE
-//    #define GWIN_NEED_IMAGE                          FALSE
-//        #define GWIN_NEED_IMAGE_ANIMATION            FALSE
-//    #define GWIN_NEED_RADIO                          FALSE
-//    #define GWIN_NEED_LIST                           FALSE
-//        #define GWIN_NEED_LIST_IMAGES                FALSE
-//    #define GWIN_NEED_PROGRESSBAR                    FALSE
-//        #define GWIN_PROGRESSBAR_AUTO                FALSE
-//    #define GWIN_NEED_KEYBOARD                       FALSE
-//        #define GWIN_KEYBOARD_DEFAULT_LAYOUT         VirtualKeyboard_English1
-//        #define GWIN_NEED_KEYBOARD_ENGLISH1          TRUE
-//    #define GWIN_NEED_TEXTEDIT                       FALSE
-//    #define GWIN_FLAT_STYLING                        FALSE
-//    #define GWIN_WIDGET_TAGS                         FALSE
-
-//#define GWIN_NEED_CONTAINERS                         FALSE
-//    #define GWIN_NEED_CONTAINER                      FALSE
-//    #define GWIN_NEED_FRAME                          FALSE
-//    #define GWIN_NEED_TABSET                         FALSE
-//        #define GWIN_TABSET_TABHEIGHT                18
-
-
-///////////////////////////////////////////////////////////////////////////
-// GEVENT                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GEVENT                               TRUE
-
-//#define GEVENT_ASSERT_NO_RESOURCE                    FALSE
-//#define GEVENT_MAXIMUM_SIZE                          32
-//#define GEVENT_MAX_SOURCE_LISTENERS                  32
-
-
-///////////////////////////////////////////////////////////////////////////
-// GTIMER                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GTIMER                               FALSE
-
-//#define GTIMER_THREAD_PRIORITY                       HIGH_PRIORITY
-//#define GTIMER_THREAD_WORKAREA_SIZE                  2048
-
-
-///////////////////////////////////////////////////////////////////////////
-// GQUEUE                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GQUEUE                               FALSE
-
-//#define GQUEUE_NEED_ASYNC                            FALSE
-//#define GQUEUE_NEED_GSYNC                            FALSE
-//#define GQUEUE_NEED_FSYNC                            FALSE
-//#define GQUEUE_NEED_BUFFERS                          FALSE
-
-///////////////////////////////////////////////////////////////////////////
-// GINPUT                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GINPUT                               FALSE
-
-//#define GINPUT_NEED_MOUSE                            FALSE
-//    #define GINPUT_TOUCH_STARTRAW                    FALSE
-//    #define GINPUT_TOUCH_NOTOUCH                     FALSE
-//    #define GINPUT_TOUCH_NOCALIBRATE                 FALSE
-//    #define GINPUT_TOUCH_NOCALIBRATE_GUI             FALSE
-//    #define GINPUT_MOUSE_POLL_PERIOD                 25
-//    #define GINPUT_MOUSE_CLICK_TIME                  300
-//    #define GINPUT_TOUCH_CXTCLICK_TIME               700
-//    #define GINPUT_TOUCH_USER_CALIBRATION_LOAD       FALSE
-//    #define GINPUT_TOUCH_USER_CALIBRATION_SAVE       FALSE
-//    #define GMOUSE_DRIVER_LIST                       GMOUSEVMT_Win32, GMOUSEVMT_Win32
-//#define GINPUT_NEED_KEYBOARD                         FALSE
-//    #define GINPUT_KEYBOARD_POLL_PERIOD              200
-//    #define GKEYBOARD_DRIVER_LIST                    GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
-//    #define GKEYBOARD_LAYOUT_OFF                     FALSE
-//        #define GKEYBOARD_LAYOUT_SCANCODE2_US        FALSE
-//#define GINPUT_NEED_TOGGLE                           FALSE
-//#define GINPUT_NEED_DIAL                             FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GFILE                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GFILE                                FALSE
-
-//#define GFILE_NEED_PRINTG                            FALSE
-//#define GFILE_NEED_SCANG                             FALSE
-//#define GFILE_NEED_STRINGS                           FALSE
-//#define GFILE_NEED_FILELISTS                         FALSE
-//#define GFILE_NEED_STDIO                             FALSE
-//#define GFILE_NEED_NOAUTOMOUNT                       FALSE
-//#define GFILE_NEED_NOAUTOSYNC                        FALSE
-
-//#define GFILE_NEED_MEMFS                             FALSE
-//#define GFILE_NEED_ROMFS                             FALSE
-//#define GFILE_NEED_RAMFS                             FALSE
-//#define GFILE_NEED_FATFS                             FALSE
-//#define GFILE_NEED_NATIVEFS                          FALSE
-//#define GFILE_NEED_CHBIOSFS                          FALSE
-
-//#define GFILE_ALLOW_FLOATS                           FALSE
-//#define GFILE_ALLOW_DEVICESPECIFIC                   FALSE
-//#define GFILE_MAX_GFILES                             3
-
-///////////////////////////////////////////////////////////////////////////
-// GADC                                                                  //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GADC                                 FALSE
-
-//#define GADC_MAX_LOWSPEED_DEVICES                    4
-
-
-///////////////////////////////////////////////////////////////////////////
-// GAUDIO                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GAUDIO                               FALSE
-// There seems to be a bug in the ugfx code, the wrong define is used
-// So define it in order to avoid warnings
-#define GFX_USE_GAUDIN                               GFX_USE_GAUDIO
-//    #define GAUDIO_NEED_PLAY                         FALSE
-//    #define GAUDIO_NEED_RECORD                       FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GMISC                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GMISC                                TRUE
-
-//#define GMISC_NEED_ARRAYOPS                          FALSE
-//#define GMISC_NEED_FASTTRIG                          FALSE
-//#define GMISC_NEED_FIXEDTRIG                         FALSE
-//#define GMISC_NEED_INVSQRT                           FALSE
-//    #define GMISC_INVSQRT_MIXED_ENDIAN               FALSE
-//    #define GMISC_INVSQRT_REAL_SLOW                  FALSE
-#define GMISC_NEED_MATRIXFLOAT2D                     TRUE
-#define GMISC_NEED_MATRIXFIXED2D                     FALSE
 
 #endif /* _GFXCONF_H */

keyboards/ergodox/infinity/rules.mk

@@ -1,7 +1,6 @@
 # project specific files
 SRC =	matrix.c \
-	led.c \
+	led.c
-	animations.c
 
 ## chip/board settings
 # - the next two should match the directories in
@@ -67,5 +66,10 @@ LCD_BACKLIGHT_ENABLE = yes
 MIDI_ENABLE = no
 RGBLIGHT_ENABLE = no
 
-include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
+LCD_DRIVER = st7565
-include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
+LCD_WIDTH = 128 
+LCD_HEIGHT = 32
+
+LED_DRIVER = is31fl3731c
+LED_WIDTH = 7 
+LED_HEIGHT = 7

keyboards/ergodox/infinity/simple_visualizer.h

@@ -34,7 +34,7 @@
 #include "lcd_backlight_keyframes.h"
 #include "system/serial_link.h"
 #include "led.h"
-#include "animations.h"
+#include "default_animations.h"
 
 static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF);
 static const uint32_t initial_color = LCD_COLOR(0, 0, 0);
@@ -58,7 +58,7 @@ static keyframe_animation_t color_animation = {
     // this prevents the color from changing when activating the layer
     // momentarily
     .frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)},
-    .frame_functions = {keyframe_no_operation, backlight_keyframe_animate_color},
+    .frame_functions = {keyframe_no_operation, lcd_backlight_keyframe_animate_color},
 };
 
 void initialize_user_visualizer(visualizer_state_t* state) {

keyboards/ergodox/infinity/visualizer.c

@@ -31,7 +31,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "lcd_keyframes.h"
 #include "lcd_backlight_keyframes.h"
 #include "system/serial_link.h"
-#include "animations.h"
+#include "default_animations.h"
 
 static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF);
 static const uint32_t initial_color = LCD_COLOR(0, 0, 0);
@@ -79,7 +79,7 @@ static keyframe_animation_t one_led_color = {
     .num_frames = 1,
     .loop = false,
     .frame_lengths = {gfxMillisecondsToTicks(0)},
-    .frame_functions = {backlight_keyframe_set_color},
+    .frame_functions = {lcd_backlight_keyframe_set_color},
 };
 
 bool swap_led_target_color(keyframe_animation_t* animation, visualizer_state_t* state) {
@@ -94,7 +94,7 @@ static keyframe_animation_t two_led_colors = {
     .num_frames = 2,
     .loop = true,
     .frame_lengths = {gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(0)},
-    .frame_functions = {backlight_keyframe_set_color, swap_led_target_color},
+    .frame_functions = {lcd_backlight_keyframe_set_color, swap_led_target_color},
 };
 
 // The LCD animation alternates between the layer name display and a

keyboards/whitefox/animations.c

@@ -1,128 +0,0 @@
-/* Copyright 2017 Fred Sundvik
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#if defined(VISUALIZER_ENABLE)
-
-#include "animations.h"
-#include "visualizer.h"
-
-#ifdef BACKLIGHT_ENABLE
-#include "led_keyframes.h"
-#endif
-
-#include "visualizer_keyframes.h"
-
-
-#if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE)
-
-static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef BACKLIGHT_ENABLE
-    led_keyframe_enable(animation, state);
-#endif
-    return false;
-}
-
-static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) {
-#ifdef BACKLIGHT_ENABLE
-    led_keyframe_disable(animation, state);
-#endif
-    return false;
-}
-
-static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
-    bool ret = false;
-#ifdef BACKLIGHT_ENABLE
-    ret |= led_keyframe_fade_in_all(animation, state);
-#endif
-    return ret;
-}
-
-static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
-    bool ret = false;
-#ifdef BACKLIGHT_ENABLE
-    ret |= led_keyframe_fade_out_all(animation, state);
-#endif
-    return ret;
-}
-
-
-// Don't worry, if the startup animation is long, you can use the keyboard like normal
-// during that time
-keyframe_animation_t default_startup_animation = {
-    .num_frames = 2,
-    .loop = false,
-    .frame_lengths = {0, gfxMillisecondsToTicks(5000)},
-    .frame_functions = {
-            keyframe_enable,
-            keyframe_fade_in,
-    },
-};
-
-keyframe_animation_t default_suspend_animation = {
-    .num_frames = 2,
-    .loop = false,
-    .frame_lengths = {gfxMillisecondsToTicks(1000), 0},
-    .frame_functions = {
-            keyframe_fade_out,
-            keyframe_disable,
-    },
-};
-#endif
-
-#if defined(BACKLIGHT_ENABLE)
-#define CROSSFADE_TIME 1000
-#define GRADIENT_TIME 3000
-
-keyframe_animation_t led_test_animation = {
-    .num_frames = 14,
-    .loop = true,
-    .frame_lengths = {
-        gfxMillisecondsToTicks(1000), // fade in
-        gfxMillisecondsToTicks(1000), // no op (leds on)
-        gfxMillisecondsToTicks(1000), // fade out
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in)
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
-        0,           // mirror leds
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out)
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-        gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom
-        0,           // normal leds
-        gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade
-
-    },
-    .frame_functions = {
-        led_keyframe_fade_in_all,
-        keyframe_no_operation,
-        led_keyframe_fade_out_all,
-        led_keyframe_crossfade,
-        led_keyframe_left_to_right_gradient,
-        led_keyframe_crossfade,
-        led_keyframe_top_to_bottom_gradient,
-        led_keyframe_mirror_orientation,
-        led_keyframe_crossfade,
-        led_keyframe_left_to_right_gradient,
-        led_keyframe_crossfade,
-        led_keyframe_top_to_bottom_gradient,
-        led_keyframe_normal_orientation,
-        led_keyframe_crossfade,
-    },
-};
-#endif
-
-#endif

keyboards/whitefox/board_is31fl3731c.h

@@ -22,9 +22,6 @@ static const I2CConfig i2ccfg = {
   400000 // clock speed (Hz); 400kHz max for IS31
 };
 
-#define GDISP_SCREEN_WIDTH  16
-#define GDISP_SCREEN_HEIGHT 5
-
 static const uint8_t led_mask[] = {
 	0xFF, 0x00, /* C1-1 -> C1-16 */
 	0xFF, 0x00, /* C2-1 -> C2-16 */

keyboards/whitefox/config.h

@@ -81,12 +81,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-#endif
+#endif
-
-// The visualizer needs gfx thread priorities
-#define LED_DISPLAY_NUMBER 0
-
-#define LED_NUM_ROWS 5
-#define LED_NUM_COLS 16
-
-#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2)

keyboards/whitefox/drivers/gdisp/IS31FL3731C/driver.mk

@@ -1,2 +0,0 @@
-GFXINC += drivers/gdisp/IS31FL3731C
-GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c

keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c

@@ -1,312 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <[email protected]>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT			GDISPVMT_IS31FL3731C_WHITEFOX
-#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_IS31FL3731C.h"
-
-
-// Can't include led_tables from here
-extern const uint8_t CIE1931_CURVE[];
-
-/*===========================================================================*/
-/* Driver local definitions.                                                 */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
-	#define GDISP_SCREEN_HEIGHT		9
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-	#define GDISP_SCREEN_WIDTH		16
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-	#define GDISP_INITIAL_CONTRAST	0
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-	#define GDISP_INITIAL_BACKLIGHT	0
-#endif
-
-#define GDISP_FLG_NEEDFLUSH			(GDISP_FLG_DRIVER<<0)
-
-#define IS31_ADDR_DEFAULT 0x74
-
-#define IS31_REG_CONFIG  0x00
-// bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE 0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
-// D2:D0 bits are starting frame for autoplay mode
-
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
-
-#define IS31_REG_AUTOPLAYCTRL1 0x02
-// D6:D4 number of loops (000=infty)
-// D2:D0 number of frames to be used
-
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
-
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
-// D2:D0 bits blink period time (*0.27s)
-
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
-
-#define IS31_REG_FRAMESTATE 0x07
-
-#define IS31_REG_BREATHCTRL1 0x08
-// D6:D4 fade out time (26ms*2^i)
-// D2:D0 fade in time (26ms*2^i)
-
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
-// D2:D0 extinguish time (3.5ms*2^i)
-
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x0
-#define IS31_REG_SHUTDOWN_ON 0x1
-
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
-
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-#define IS31_FUNCTIONREG_SIZE 0xD
-
-#define IS31_FRAME_SIZE 0xB4
-
-#define IS31_PWM_REG 0x24
-#define IS31_PWM_SIZE 0x90
-
-#define IS31_LED_MASK_SIZE 0x12
-#define IS31_SCREEN_WIDTH 16
-
-#define IS31
-
-/*===========================================================================*/
-/* Driver local functions.                                                   */
-/*===========================================================================*/
-
-typedef struct{
-    uint8_t write_buffer_offset;
-    uint8_t write_buffer[IS31_FRAME_SIZE];
-    uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
-    uint8_t page;
-}__attribute__((__packed__)) PrivData;
-
-// Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-
-/*===========================================================================*/
-/* Driver exported functions.                                                */
-/*===========================================================================*/
-
-static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
-    uint8_t tx[2] __attribute__((aligned(2)));
-    tx[0] = IS31_COMMANDREGISTER;
-    tx[1] = page;
-    write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
-    uint8_t tx[2] __attribute__((aligned(2)));
-    tx[0] = reg;
-    tx[1] = data;
-    write_page(g, page);
-    write_data(g, tx, 2);
-}
-
-static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
-    PRIV(g)->write_buffer_offset = offset;
-    write_page(g, page);
-    write_data(g, (uint8_t*)PRIV(g), length + 1);
-}
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
-	// The private area is the display surface.
-	g->priv = gfxAlloc(sizeof(PrivData));
-    __builtin_memset(PRIV(g), 0, sizeof(PrivData));
-	PRIV(g)->page = 0;
-
-	// Initialise the board interface
-	init_board(g);
-	gfxSleepMilliseconds(10);
-
-    // zero function page, all registers (assuming full_page is all zeroes)
-    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
-    set_hardware_shutdown(g, false);
-    gfxSleepMilliseconds(10);
-    // software shutdown
-    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-    gfxSleepMilliseconds(10);
-    // zero function page, all registers
-    write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
-    gfxSleepMilliseconds(10);
-
-
-    // zero all LED registers on all 8 pages, and enable the mask
-    __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
-    for(uint8_t i=0; i<8; i++) {
-        write_ram(g, i, 0, IS31_FRAME_SIZE);
-        gfxSleepMilliseconds(1);
-    }
-
-    // software shutdown disable (i.e. turn stuff on)
-    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-    gfxSleepMilliseconds(10);
-
-    // Finish Init
-    post_init_board(g);
-
-	/* Initialise the GDISP structure */
-	g->g.Width = GDISP_SCREEN_WIDTH;
-	g->g.Height = GDISP_SCREEN_HEIGHT;
-	g->g.Orientation = GDISP_ROTATE_0;
-	g->g.Powermode = powerOff;
-	g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-	g->g.Contrast = GDISP_INITIAL_CONTRAST;
-	return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
-	LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-		// Don't flush if we don't need it.
-		if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-			return;
-
-		PRIV(g)->page++;
-		PRIV(g)->page %= 2;
-		// TODO: some smarter algorithm for this
-		// We should run only one physical page at a time
-		// This way we don't need to send so much data, and
-		// we could use slightly less memory
-		uint8_t* src = PRIV(g)->frame_buffer;
-		for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
-		    for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
-		        uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
-		        PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
-		        ++src;
-		    }
-		}
-        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
-        gfxSleepMilliseconds(1);
-        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
-
-		g->flags &= ~GDISP_FLG_NEEDFLUSH;
-	}
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
-	LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
-		g->flags |= GDISP_FLG_NEEDFLUSH;
-	}
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
-	LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-		coord_t		x, y;
-
-		switch(g->g.Orientation) {
-		default:
-		case GDISP_ROTATE_0:
-			x = g->p.x;
-			y = g->p.y;
-			break;
-		case GDISP_ROTATE_180:
-			x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-			y = g->p.y;
-			break;
-		}
-		return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
-	}
-#endif
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-	LLDSPEC void gdisp_lld_control(GDisplay *g) {
-		switch(g->p.x) {
-		case GDISP_CONTROL_POWER:
-			if (g->g.Powermode == (powermode_t)g->p.ptr)
-				return;
-			switch((powermode_t)g->p.ptr) {
-			case powerOff:
-			case powerSleep:
-			case powerDeepSleep:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-				break;
-			case powerOn:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-				break;
-			default:
-				return;
-			}
-			g->g.Powermode = (powermode_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_ORIENTATION:
-			if (g->g.Orientation == (orientation_t)g->p.ptr)
-				return;
-			switch((orientation_t)g->p.ptr) {
-			/* Rotation is handled by the drawing routines */
-			case GDISP_ROTATE_0:
-			case GDISP_ROTATE_180:
-				g->g.Height = GDISP_SCREEN_HEIGHT;
-				g->g.Width = GDISP_SCREEN_WIDTH;
-				break;
-			case GDISP_ROTATE_90:
-			case GDISP_ROTATE_270:
-				g->g.Height = GDISP_SCREEN_WIDTH;
-				g->g.Width = GDISP_SCREEN_HEIGHT;
-				break;
-			default:
-				return;
-			}
-			g->g.Orientation = (orientation_t)g->p.ptr;
-			return;
-
-		case GDISP_CONTROL_BACKLIGHT:
-		    if (g->g.Backlight == (unsigned)g->p.ptr)
-                return;
-		    unsigned val = (unsigned)g->p.ptr;
-		    g->g.Backlight = val > 100 ? 100 : val;
-            g->flags |= GDISP_FLG_NEEDFLUSH;
-		    return;
-		}
-	}
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP

keyboards/whitefox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h

@@ -1,36 +0,0 @@
-/*
-Copyright 2016 Fred Sundvik <[email protected]>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support.                                                  */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH			TRUE		// This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL		TRUE
-#define GDISP_HARDWARE_PIXELREAD		TRUE
-#define GDISP_HARDWARE_CONTROL			TRUE
-
-#define GDISP_LLD_PIXELFORMAT			GDISP_PIXELFORMAT_GRAY256
-
-#endif	/* GFX_USE_GDISP */
-
-#endif	/* _GDISP_LLD_CONFIG_H */

keyboards/whitefox/gfxconf.h

@@ -22,308 +22,6 @@
 #ifndef _GFXCONF_H
 #define _GFXCONF_H
 
-
+#include "common_gfxconf.h"
-///////////////////////////////////////////////////////////////////////////
-// GOS - One of these must be defined, preferably in your Makefile       //
-///////////////////////////////////////////////////////////////////////////
-//#define GFX_USE_OS_CHIBIOS                           TRUE
-//#define GFX_USE_OS_FREERTOS                          FALSE
-//    #define GFX_FREERTOS_USE_TRACE                   FALSE
-//#define GFX_USE_OS_WIN32                             FALSE
-//#define GFX_USE_OS_LINUX                             FALSE
-//#define GFX_USE_OS_OSX                               FALSE
-//#define GFX_USE_OS_ECOS                              FALSE
-//#define GFX_USE_OS_RAWRTOS                           FALSE
-//#define GFX_USE_OS_ARDUINO                           FALSE
-//#define GFX_USE_OS_KEIL                              FALSE
-//#define GFX_USE_OS_CMSIS                             FALSE
-//#define GFX_USE_OS_RAW32                             FALSE
-//    #define INTERRUPTS_OFF()                         optional_code
-//    #define INTERRUPTS_ON()                          optional_code
-// These are not defined by default for some reason
-#define GOS_NEED_X_THREADS	FALSE
-#define GOS_NEED_X_HEAP		FALSE
-
-// Options that (should where relevant) apply to all operating systems
-    #define GFX_NO_INLINE                            FALSE
-//    #define GFX_COMPILER                             GFX_COMPILER_UNKNOWN
-//    #define GFX_CPU                                  GFX_CPU_UNKNOWN
-//    #define GFX_OS_HEAP_SIZE                         0
-//    #define GFX_OS_NO_INIT                           FALSE
-//    #define GFX_OS_INIT_NO_WARNING                   FALSE
-//    #define GFX_OS_PRE_INIT_FUNCTION                 myHardwareInitRoutine
-//    #define GFX_OS_EXTRA_INIT_FUNCTION               myOSInitRoutine
-//    #define GFX_OS_EXTRA_DEINIT_FUNCTION             myOSDeInitRoutine
-
-
-///////////////////////////////////////////////////////////////////////////
-// GDISP                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GDISP                                TRUE
-
-//#define GDISP_NEED_AUTOFLUSH                         FALSE
-//#define GDISP_NEED_TIMERFLUSH                        FALSE
-//#define GDISP_NEED_VALIDATION                        TRUE
-//#define GDISP_NEED_CLIP                              TRUE
-#define GDISP_NEED_CIRCLE                            TRUE
-#define GDISP_NEED_ELLIPSE                           TRUE
-#define GDISP_NEED_ARC                               TRUE
-#define GDISP_NEED_ARCSECTORS                        TRUE
-#define GDISP_NEED_CONVEX_POLYGON                    TRUE
-//#define GDISP_NEED_SCROLL                            FALSE
-#define GDISP_NEED_PIXELREAD                         TRUE
-#define GDISP_NEED_CONTROL                           TRUE
-//#define GDISP_NEED_QUERY                             FALSE
-//#define GDISP_NEED_MULTITHREAD                       FALSE
-//#define GDISP_NEED_STREAMING                         FALSE
-#define GDISP_NEED_TEXT                              TRUE
-//    #define GDISP_NEED_TEXT_WORDWRAP                 FALSE
-//    #define GDISP_NEED_ANTIALIAS                     FALSE
-//    #define GDISP_NEED_UTF8                          FALSE
-    #define GDISP_NEED_TEXT_KERNING                  TRUE
-//    #define GDISP_INCLUDE_FONT_UI1                   FALSE
-//    #define GDISP_INCLUDE_FONT_UI2                   FALSE		// The smallest preferred font.
-//    #define GDISP_INCLUDE_FONT_LARGENUMBERS          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS10          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24          FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32          FALSE
-    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12      TRUE
-//    #define GDISP_INCLUDE_FONT_FIXED_10X20           FALSE
-//    #define GDISP_INCLUDE_FONT_FIXED_7X14            FALSE
-    #define GDISP_INCLUDE_FONT_FIXED_5X8             TRUE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA       FALSE
-//    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA   FALSE
-//    #define GDISP_INCLUDE_USER_FONTS                 FALSE
-
-//#define GDISP_NEED_IMAGE                             FALSE
-//    #define GDISP_NEED_IMAGE_NATIVE                  FALSE
-//    #define GDISP_NEED_IMAGE_GIF                     FALSE
-//    #define GDISP_NEED_IMAGE_BMP                     FALSE
-//        #define GDISP_NEED_IMAGE_BMP_1               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_4               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_4_RLE           FALSE
-//        #define GDISP_NEED_IMAGE_BMP_8               FALSE
-//        #define GDISP_NEED_IMAGE_BMP_8_RLE           FALSE
-//        #define GDISP_NEED_IMAGE_BMP_16              FALSE
-//        #define GDISP_NEED_IMAGE_BMP_24              FALSE
-//        #define GDISP_NEED_IMAGE_BMP_32              FALSE
-//    #define GDISP_NEED_IMAGE_JPG                     FALSE
-//    #define GDISP_NEED_IMAGE_PNG                     FALSE
-//    #define GDISP_NEED_IMAGE_ACCOUNTING              FALSE
-#ifdef EMULATOR
-#define GDISP_NEED_PIXMAP                            TRUE
-#endif
-//    #define GDISP_NEED_PIXMAP_IMAGE                  FALSE
-
-//#define GDISP_DEFAULT_ORIENTATION                    GDISP_ROTATE_LANDSCAPE    // If not defined the native hardware orientation is used.
-//#define GDISP_LINEBUF_SIZE                           128
-//#define GDISP_STARTUP_COLOR                          Black
-#define GDISP_NEED_STARTUP_LOGO                      FALSE
-
-//#define GDISP_TOTAL_DISPLAYS		                 2
-
-#ifndef EMULATOR
-#define GDISP_DRIVER_LIST                            GDISPVMT_IS31FL3731C_WHITEFOX
-#endif
-
-    #ifdef GDISP_DRIVER_LIST
-        // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
-        #define GDISP_HARDWARE_STREAM_WRITE          FALSE
-        #define GDISP_HARDWARE_STREAM_READ           FALSE
-        #define GDISP_HARDWARE_STREAM_POS            FALSE
-        #define GDISP_HARDWARE_DRAWPIXEL             TRUE
-        #define GDISP_HARDWARE_CLEARS                FALSE
-        #define GDISP_HARDWARE_FILLS                 FALSE
-        //#define GDISP_HARDWARE_BITFILLS              FALSE
-        #define GDISP_HARDWARE_SCROLL                FALSE
-        #define GDISP_HARDWARE_PIXELREAD             TRUE
-        #define GDISP_HARDWARE_CONTROL               TRUE
-        #define GDISP_HARDWARE_QUERY                 FALSE
-        #define GDISP_HARDWARE_CLIP                  FALSE
-
-        #define GDISP_PIXELFORMAT                    GDISP_PIXELFORMAT_RGB888
-    #endif
-
-// The custom format is not defined for some reason, so define it as error
-// so we don't get compiler warnings
-#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR
-
-#define GDISP_USE_GFXNET                             FALSE
-//    #define GDISP_GFXNET_PORT                        13001
-//    #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP         FALSE
-//    #define GDISP_DONT_WAIT_FOR_NET_DISPLAY          FALSE
-//    #define GDISP_GFXNET_UNSAFE_SOCKETS              FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GWIN                                                                  //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GWIN                                 FALSE
-
-//#define GWIN_NEED_WINDOWMANAGER                      FALSE
-//    #define GWIN_REDRAW_IMMEDIATE                    FALSE
-//    #define GWIN_REDRAW_SINGLEOP                     FALSE
-//    #define GWIN_NEED_FLASHING                       FALSE
-//        #define GWIN_FLASHING_PERIOD                 250
-
-//#define GWIN_NEED_CONSOLE                            FALSE
-//    #define GWIN_CONSOLE_USE_HISTORY                 FALSE
-//        #define GWIN_CONSOLE_HISTORY_AVERAGING       FALSE
-//        #define GWIN_CONSOLE_HISTORY_ATCREATE        FALSE
-//    #define GWIN_CONSOLE_ESCSEQ                      FALSE
-//    #define GWIN_CONSOLE_USE_BASESTREAM              FALSE
-//    #define GWIN_CONSOLE_USE_FLOAT                   FALSE
-//#define GWIN_NEED_GRAPH                              FALSE
-//#define GWIN_NEED_GL3D                               FALSE
-
-//#define GWIN_NEED_WIDGET                             FALSE
-//#define GWIN_FOCUS_HIGHLIGHT_WIDTH                   1
-//    #define GWIN_NEED_LABEL                          FALSE
-//        #define GWIN_LABEL_ATTRIBUTE                 FALSE
-//    #define GWIN_NEED_BUTTON                         FALSE
-//        #define GWIN_BUTTON_LAZY_RELEASE             FALSE
-//    #define GWIN_NEED_SLIDER                         FALSE
-//        #define GWIN_SLIDER_NOSNAP                   FALSE
-//        #define GWIN_SLIDER_DEAD_BAND                5
-//        #define GWIN_SLIDER_TOGGLE_INC               20
-//    #define GWIN_NEED_CHECKBOX                       FALSE
-//    #define GWIN_NEED_IMAGE                          FALSE
-//        #define GWIN_NEED_IMAGE_ANIMATION            FALSE
-//    #define GWIN_NEED_RADIO                          FALSE
-//    #define GWIN_NEED_LIST                           FALSE
-//        #define GWIN_NEED_LIST_IMAGES                FALSE
-//    #define GWIN_NEED_PROGRESSBAR                    FALSE
-//        #define GWIN_PROGRESSBAR_AUTO                FALSE
-//    #define GWIN_NEED_KEYBOARD                       FALSE
-//        #define GWIN_KEYBOARD_DEFAULT_LAYOUT         VirtualKeyboard_English1
-//        #define GWIN_NEED_KEYBOARD_ENGLISH1          TRUE
-//    #define GWIN_NEED_TEXTEDIT                       FALSE
-//    #define GWIN_FLAT_STYLING                        FALSE
-//    #define GWIN_WIDGET_TAGS                         FALSE
-
-//#define GWIN_NEED_CONTAINERS                         FALSE
-//    #define GWIN_NEED_CONTAINER                      FALSE
-//    #define GWIN_NEED_FRAME                          FALSE
-//    #define GWIN_NEED_TABSET                         FALSE
-//        #define GWIN_TABSET_TABHEIGHT                18
-
-
-///////////////////////////////////////////////////////////////////////////
-// GEVENT                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GEVENT                               TRUE
-
-//#define GEVENT_ASSERT_NO_RESOURCE                    FALSE
-//#define GEVENT_MAXIMUM_SIZE                          32
-//#define GEVENT_MAX_SOURCE_LISTENERS                  32
-
-
-///////////////////////////////////////////////////////////////////////////
-// GTIMER                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GTIMER                               FALSE
-
-//#define GTIMER_THREAD_PRIORITY                       HIGH_PRIORITY
-//#define GTIMER_THREAD_WORKAREA_SIZE                  2048
-
-
-///////////////////////////////////////////////////////////////////////////
-// GQUEUE                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GQUEUE                               FALSE
-
-//#define GQUEUE_NEED_ASYNC                            FALSE
-//#define GQUEUE_NEED_GSYNC                            FALSE
-//#define GQUEUE_NEED_FSYNC                            FALSE
-//#define GQUEUE_NEED_BUFFERS                          FALSE
-
-///////////////////////////////////////////////////////////////////////////
-// GINPUT                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GINPUT                               FALSE
-
-//#define GINPUT_NEED_MOUSE                            FALSE
-//    #define GINPUT_TOUCH_STARTRAW                    FALSE
-//    #define GINPUT_TOUCH_NOTOUCH                     FALSE
-//    #define GINPUT_TOUCH_NOCALIBRATE                 FALSE
-//    #define GINPUT_TOUCH_NOCALIBRATE_GUI             FALSE
-//    #define GINPUT_MOUSE_POLL_PERIOD                 25
-//    #define GINPUT_MOUSE_CLICK_TIME                  300
-//    #define GINPUT_TOUCH_CXTCLICK_TIME               700
-//    #define GINPUT_TOUCH_USER_CALIBRATION_LOAD       FALSE
-//    #define GINPUT_TOUCH_USER_CALIBRATION_SAVE       FALSE
-//    #define GMOUSE_DRIVER_LIST                       GMOUSEVMT_Win32, GMOUSEVMT_Win32
-//#define GINPUT_NEED_KEYBOARD                         FALSE
-//    #define GINPUT_KEYBOARD_POLL_PERIOD              200
-//    #define GKEYBOARD_DRIVER_LIST                    GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
-//    #define GKEYBOARD_LAYOUT_OFF                     FALSE
-//        #define GKEYBOARD_LAYOUT_SCANCODE2_US        FALSE
-//#define GINPUT_NEED_TOGGLE                           FALSE
-//#define GINPUT_NEED_DIAL                             FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GFILE                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GFILE                                FALSE
-
-//#define GFILE_NEED_PRINTG                            FALSE
-//#define GFILE_NEED_SCANG                             FALSE
-//#define GFILE_NEED_STRINGS                           FALSE
-//#define GFILE_NEED_FILELISTS                         FALSE
-//#define GFILE_NEED_STDIO                             FALSE
-//#define GFILE_NEED_NOAUTOMOUNT                       FALSE
-//#define GFILE_NEED_NOAUTOSYNC                        FALSE
-
-//#define GFILE_NEED_MEMFS                             FALSE
-//#define GFILE_NEED_ROMFS                             FALSE
-//#define GFILE_NEED_RAMFS                             FALSE
-//#define GFILE_NEED_FATFS                             FALSE
-//#define GFILE_NEED_NATIVEFS                          FALSE
-//#define GFILE_NEED_CHBIOSFS                          FALSE
-
-//#define GFILE_ALLOW_FLOATS                           FALSE
-//#define GFILE_ALLOW_DEVICESPECIFIC                   FALSE
-//#define GFILE_MAX_GFILES                             3
-
-///////////////////////////////////////////////////////////////////////////
-// GADC                                                                  //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GADC                                 FALSE
-
-//#define GADC_MAX_LOWSPEED_DEVICES                    4
-
-
-///////////////////////////////////////////////////////////////////////////
-// GAUDIO                                                                //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GAUDIO                               FALSE
-// There seems to be a bug in the ugfx code, the wrong define is used
-// So define it in order to avoid warnings
-#define GFX_USE_GAUDIN                               GFX_USE_GAUDIO
-//    #define GAUDIO_NEED_PLAY                         FALSE
-//    #define GAUDIO_NEED_RECORD                       FALSE
-
-
-///////////////////////////////////////////////////////////////////////////
-// GMISC                                                                 //
-///////////////////////////////////////////////////////////////////////////
-#define GFX_USE_GMISC                                TRUE
-
-//#define GMISC_NEED_ARRAYOPS                          FALSE
-//#define GMISC_NEED_FASTTRIG                          FALSE
-//#define GMISC_NEED_FIXEDTRIG                         FALSE
-//#define GMISC_NEED_INVSQRT                           FALSE
-//    #define GMISC_INVSQRT_MIXED_ENDIAN               FALSE
-//    #define GMISC_INVSQRT_REAL_SLOW                  FALSE
-#define GMISC_NEED_MATRIXFLOAT2D                     TRUE
-#define GMISC_NEED_MATRIXFIXED2D                     FALSE
 
 #endif /* _GFXCONF_H */

keyboards/whitefox/rules.mk

@@ -1,7 +1,6 @@
 # project specific files
 SRC =	matrix.c \
-	led.c \
+	led.c
-	animations.c
 
 ## chip/board settings
 # - the next two should match the directories in
@@ -70,4 +69,6 @@ CUSTOM_MATRIX = yes # Custom matrix file
 BACKLIGHT_ENABLE = yes
 VISUALIZER_ENABLE = yes
 
-include $(KEYBOARD_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
+LED_DRIVER = is31fl3731c
+LED_WIDTH = 16 
+LED_HEIGHT = 5

keyboards/whitefox/visualizer.c

@@ -20,7 +20,7 @@
 #include "visualizer.h"
 #include "visualizer_keyframes.h"
 #include "led.h"
-#include "animations.h"
+#include "default_animations.h"
 
 
 static bool initial_update = true;

lcd_backlight_keyframes.h

@@ -20,11 +20,11 @@
 #include "visualizer.h"
 
 // Animates the LCD backlight color between the current color and the target color (of the state)
-bool backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state);
+bool lcd_backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state);
 // Sets the backlight color to the target color
-bool backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state);
+bool lcd_backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state);
 
-bool backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state);
+bool lcd_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state);
-bool backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state);
+bool lcd_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state);
 
 #endif /* QUANTUM_VISUALIZER_LCD_BACKLIGHT_KEYFRAMES_H_ */

lib/lufa/Bootloaders/CDC/asf.xml

@@ -1,161 +1,161 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
+	<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
-		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.bootloaders.cdc"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
+	<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
-		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.bootloaders.cdc"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb647"/>
+		<device-support value="at90usb647"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
+	<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
-		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.bootloaders.cdc"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega32u4"/>
+		<device-support value="atmega32u4"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
+	<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
-		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.bootloaders.cdc"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega16u2"/>
+		<device-support value="atmega16u2"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
+	<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
-		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.bootloaders.cdc"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega8u2"/>
+		<device-support value="atmega8u2"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
+	<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
+		CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Bootloaders"/>
+			<keyword value="Bootloaders"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-		</info>
+		</info>
-
+
- 		<device-support-alias value="lufa_avr8"/>
+ 		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="include-path" value="."/>
+		<build type="include-path" value="."/>
-		<build type="c-source" value="BootloaderCDC.c"/>
+		<build type="c-source" value="BootloaderCDC.c"/>
-		<build type="header-file" value="BootloaderCDC.h"/>
+		<build type="header-file" value="BootloaderCDC.h"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
-		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
-		<build type="asm-source" value="BootloaderAPITable.S"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
+		<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
-		<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
+		<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Bootloaders/DFU/asf.xml

@@ -1,156 +1,156 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
+	<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
-		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.bootloaders.dfu"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
+	<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
-		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.bootloaders.dfu"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb647"/>
+		<device-support value="at90usb647"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
+	<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
-		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.bootloaders.dfu"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega32u4"/>
+		<device-support value="atmega32u4"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
+	<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
-		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.bootloaders.dfu"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega16u2"/>
+		<device-support value="atmega16u2"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
+	<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
-		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.bootloaders.dfu"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega8u2"/>
+		<device-support value="atmega8u2"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
+	<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
+		DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Bootloaders"/>
+			<keyword value="Bootloaders"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-		</info>
+		</info>
-
+
- 		<device-support-alias value="lufa_avr8"/>
+ 		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="include-path" value="."/>
+		<build type="include-path" value="."/>
-		<build type="c-source" value="BootloaderDFU.c"/>
+		<build type="c-source" value="BootloaderDFU.c"/>
-		<build type="header-file" value="BootloaderDFU.h"/>
+		<build type="header-file" value="BootloaderDFU.h"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
-		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
-		<build type="asm-source" value="BootloaderAPITable.S"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
+		<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Bootloaders/HID/asf.xml

@@ -1,123 +1,123 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
+	<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
-		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.bootloaders.hid"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
-	</project>
+	</project>
-
+
-	<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
+	<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
-		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.bootloaders.hid"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb647"/>
+		<device-support value="at90usb647"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
-	</project>
+	</project>
-
+
-	<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
+	<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
-		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.bootloaders.hid"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega32u4"/>
+		<device-support value="atmega32u4"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
-	</project>
+	</project>
-
+
-	<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
+	<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
-		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.bootloaders.hid"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega16u2"/>
+		<device-support value="atmega16u2"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x3800"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x3800"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
-	</project>
+	</project>
-
+
-	<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
+	<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
-		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.bootloaders.hid"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega8u2"/>
+		<device-support value="atmega8u2"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x1800"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x1800"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
+	<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
+		HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Bootloaders"/>
+			<keyword value="Bootloaders"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="include-path" value="."/>
+		<build type="include-path" value="."/>
-		<build type="c-source" value="BootloaderHID.c"/>
+		<build type="c-source" value="BootloaderHID.c"/>
-		<build type="header-file" value="BootloaderHID.h"/>
+		<build type="header-file" value="BootloaderHID.h"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
+		<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
-		<build type="distribute" subtype="directory" value="HostLoaderApp"/>
+		<build type="distribute" subtype="directory" value="HostLoaderApp"/>
-		<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
+		<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Bootloaders/MassStorage/asf.xml

@@ -1,156 +1,156 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
+	<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
-		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.bootloaders.mass_storage"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
-
+
-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
+	<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
-		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.bootloaders.mass_storage"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb647"/>
+		<device-support value="at90usb647"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0xE000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0xE000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
-
+
-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
+	<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
-		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.bootloaders.mass_storage"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega32u4"/>
+		<device-support value="atmega32u4"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
-
+
-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
-		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
+	<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
-		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.bootloaders.mass_storage"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega16u2"/>
+		<device-support value="atmega16u2"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
-
+
-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
-		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
+	<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
+		Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Bootloaders"/>
+			<keyword value="Bootloaders"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="include-path" value="."/>
+		<build type="include-path" value="."/>
-		<build type="c-source" value="BootloaderMassStorage.c"/>
+		<build type="c-source" value="BootloaderMassStorage.c"/>
-		<build type="header-file" value="BootloaderMassStorage.h"/>
+		<build type="header-file" value="BootloaderMassStorage.h"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
-		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
-		<build type="asm-source" value="BootloaderAPITable.S"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-
+
-		<build type="include-path" value="Lib"/>
+		<build type="include-path" value="Lib"/>
-		<build type="header-file" value="Lib/VirtualFAT.h"/>
+		<build type="header-file" value="Lib/VirtualFAT.h"/>
-		<build type="c-source" value="Lib/VirtualFAT.c"/>
+		<build type="c-source" value="Lib/VirtualFAT.c"/>
-		<build type="header-file" value="Lib/SCSI.h"/>
+		<build type="header-file" value="Lib/SCSI.h"/>
-		<build type="c-source" value="Lib/SCSI.c"/>
+		<build type="c-source" value="Lib/SCSI.c"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
+		<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Bootloaders/Printer/asf.xml

@@ -1,159 +1,159 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
+	<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
-		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.bootloaders.printer"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
+	<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
-		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.bootloaders.printer"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb647"/>
+		<device-support value="at90usb647"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
+	<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
-		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.bootloaders.printer"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega32u4"/>
+		<device-support value="atmega32u4"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
+	<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
-		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.bootloaders.printer"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega16u2"/>
+		<device-support value="atmega16u2"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
+	<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
-		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.bootloaders.printer"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atmega8u2"/>
+		<device-support value="atmega8u2"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<config name="config.compiler.optimization.level" value="size"/>
+		<config name="config.compiler.optimization.level" value="size"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-
+
-		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
-
+
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
+	<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
+		Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Bootloaders"/>
+			<keyword value="Bootloaders"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="include-path" value="."/>
+		<build type="include-path" value="."/>
-		<build type="c-source" value="BootloaderPrinter.c"/>
+		<build type="c-source" value="BootloaderPrinter.c"/>
-		<build type="header-file" value="BootloaderPrinter.h"/>
+		<build type="header-file" value="BootloaderPrinter.h"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
-		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
-		<build type="asm-source" value="BootloaderAPITable.S"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
+		<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/AudioInput/asf.xml

@@ -1,52 +1,52 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Audio Input Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_input.example.avr8">
+	<project caption="Audio Input Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_input.example.avr8">
-		<require idref="lufa.demos.device.class.audio_input"/>
+		<require idref="lufa.demos.device.class.audio_input"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.audio_input" caption="Audio Input Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.audio_input" caption="Audio Input Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="Audio Class"/>
+			<keyword value="Audio Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="AudioInput.txt"/>
+		<build type="distribute" subtype="user-file" value="AudioInput.txt"/>
-
+
-		<build type="c-source" value="AudioInput.c"/>
+		<build type="c-source" value="AudioInput.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="AudioInput.h"/>
+		<build type="header-file" value="AudioInput.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.adc"/>
+		<require idref="lufa.drivers.peripheral.adc"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/AudioOutput/asf.xml

@@ -1,50 +1,50 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Audio Output Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_output.example.avr8">
+	<project caption="Audio Output Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_output.example.avr8">
-		<require idref="lufa.demos.device.class.audio_output"/>
+		<require idref="lufa.demos.device.class.audio_output"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.audio_output" caption="Audio Output Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.audio_output" caption="Audio Output Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="Audio Class"/>
+			<keyword value="Audio Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="AudioOutput.txt"/>
+		<build type="distribute" subtype="user-file" value="AudioOutput.txt"/>
-
+
-		<build type="c-source" value="AudioOutput.c"/>
+		<build type="c-source" value="AudioOutput.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="AudioOutput.h"/>
+		<build type="header-file" value="AudioOutput.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/DualVirtualSerial/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Dual Virtual Serial Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_cdc.example.avr8">
+	<project caption="Dual Virtual Serial Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_cdc.example.avr8">
-		<require idref="lufa.demos.device.class.dual_cdc"/>
+		<require idref="lufa.demos.device.class.dual_cdc"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Dual Virtual Serial Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_cdc.example.xmega">
+	<project caption="Dual Virtual Serial Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_cdc.example.xmega">
-		<require idref="lufa.demos.device.class.dual_cdc"/>
+		<require idref="lufa.demos.device.class.dual_cdc"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.dual_cdc" caption="Dual Virtual Serial Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.dual_cdc" caption="Dual Virtual Serial Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Dual Virtual Serial (CDC) demo, implementing a pair of virtual serial port interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Dual Virtual Serial (CDC) demo, implementing a pair of virtual serial port interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="CDC Class"/>
+			<keyword value="CDC Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="DualVirtualSerial.txt"/>
+		<build type="distribute" subtype="user-file" value="DualVirtualSerial.txt"/>
-		<build type="distribute" subtype="user-file" value="LUFA DualVirtualSerial.inf"/>
+		<build type="distribute" subtype="user-file" value="LUFA DualVirtualSerial.inf"/>
-
+
-		<build type="c-source" value="DualVirtualSerial.c"/>
+		<build type="c-source" value="DualVirtualSerial.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="DualVirtualSerial.h"/>
+		<build type="header-file" value="DualVirtualSerial.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/GenericHID/asf.xml

@@ -1,63 +1,63 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Generic HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.generic_hid.example.avr8">
+	<project caption="Generic HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.generic_hid.example.avr8">
-		<require idref="lufa.demos.device.class.generic_hid"/>
+		<require idref="lufa.demos.device.class.generic_hid"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Generic HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.generic_hid.example.xmega">
+	<project caption="Generic HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.generic_hid.example.xmega">
-		<require idref="lufa.demos.device.class.generic_hid"/>
+		<require idref="lufa.demos.device.class.generic_hid"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.generic_hid" caption="Generic HID Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.generic_hid" caption="Generic HID Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Generic HID device demo, implementing a device whose LEDs can be controlled via HID messages from the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Generic HID device demo, implementing a device whose LEDs can be controlled via HID messages from the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="GenericHID.txt"/>
+		<build type="distribute" subtype="user-file" value="GenericHID.txt"/>
-		<build type="distribute" subtype="directory" value="HostTestApp"/>
+		<build type="distribute" subtype="directory" value="HostTestApp"/>
-
+
-		<build type="c-source" value="GenericHID.c"/>
+		<build type="c-source" value="GenericHID.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="GenericHID.h"/>
+		<build type="header-file" value="GenericHID.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/Joystick/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Joystick HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.joystick.example.avr8">
+	<project caption="Joystick HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.joystick.example.avr8">
-		<require idref="lufa.demos.device.class.joystick"/>
+		<require idref="lufa.demos.device.class.joystick"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Joystick HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.joystick.example.xmega">
+	<project caption="Joystick HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.joystick.example.xmega">
-		<require idref="lufa.demos.device.class.joystick"/>
+		<require idref="lufa.demos.device.class.joystick"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.joystick" caption="Joystick HID Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.joystick" caption="Joystick HID Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Joystick HID device demo, implementing a basic USB joystick that can send movement information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Joystick HID device demo, implementing a basic USB joystick that can send movement information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="Joystick.txt"/>
+		<build type="distribute" subtype="user-file" value="Joystick.txt"/>
-
+
-		<build type="c-source" value="Joystick.c"/>
+		<build type="c-source" value="Joystick.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="Joystick.h"/>
+		<build type="header-file" value="Joystick.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/Keyboard/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example.avr8">
+	<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example.avr8">
-		<require idref="lufa.demos.device.class.keyboard"/>
+		<require idref="lufa.demos.device.class.keyboard"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example.xmega">
+	<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example.xmega">
-		<require idref="lufa.demos.device.class.keyboard"/>
+		<require idref="lufa.demos.device.class.keyboard"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.keyboard" caption="Keyboard HID Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.keyboard" caption="Keyboard HID Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="Keyboard.txt"/>
+		<build type="distribute" subtype="user-file" value="Keyboard.txt"/>
-
+
-		<build type="c-source" value="Keyboard.c"/>
+		<build type="c-source" value="Keyboard.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="Keyboard.h"/>
+		<build type="header-file" value="Keyboard.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/KeyboardMouse/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse.example.avr8">
+	<project caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse.example.avr8">
-		<require idref="lufa.demos.device.class.keyboard_mouse"/>
+		<require idref="lufa.demos.device.class.keyboard_mouse"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse.example.xmega">
+	<project caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse.example.xmega">
-		<require idref="lufa.demos.device.class.keyboard_mouse"/>
+		<require idref="lufa.demos.device.class.keyboard_mouse"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="KeyboardMouse.txt"/>
+		<build type="distribute" subtype="user-file" value="KeyboardMouse.txt"/>
-
+
-		<build type="c-source" value="KeyboardMouse.c"/>
+		<build type="c-source" value="KeyboardMouse.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="KeyboardMouse.h"/>
+		<build type="header-file" value="KeyboardMouse.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/KeyboardMouseMultiReport/asf.xml

@@ -1,61 +1,61 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse_mr.example.avr8">
+	<project caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse_mr.example.avr8">
-		<require idref="lufa.demos.device.class.keyboard_mouse_mr"/>
+		<require idref="lufa.demos.device.class.keyboard_mouse_mr"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse_mr.example.xmega">
+	<project caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse_mr.example.xmega">
-		<require idref="lufa.demos.device.class.keyboard_mouse_mr"/>
+		<require idref="lufa.demos.device.class.keyboard_mouse_mr"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.keyboard_mouse_mr" caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.keyboard_mouse_mr" caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a single HID interface and multiple logical reports. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a single HID interface and multiple logical reports. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="KeyboardMouseMultiReport.txt"/>
+		<build type="distribute" subtype="user-file" value="KeyboardMouseMultiReport.txt"/>
-
+
-		<build type="c-source" value="KeyboardMouseMultiReport.c"/>
+		<build type="c-source" value="KeyboardMouseMultiReport.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="KeyboardMouseMultiReport.h"/>
+		<build type="header-file" value="KeyboardMouseMultiReport.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/MIDI/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.midi.example.avr8">
+	<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.midi.example.avr8">
-		<require idref="lufa.demos.device.class.midi"/>
+		<require idref="lufa.demos.device.class.midi"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.midi.example.xmega">
+	<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.midi.example.xmega">
-		<require idref="lufa.demos.device.class.midi"/>
+		<require idref="lufa.demos.device.class.midi"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.midi" caption="MIDI Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.midi" caption="MIDI Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		MIDI device demo, implementing a basic USB MIDI device that can send messages to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		MIDI device demo, implementing a basic USB MIDI device that can send messages to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="MIDI Class"/>
+			<keyword value="MIDI Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MIDI.txt"/>
+		<build type="distribute" subtype="user-file" value="MIDI.txt"/>
-
+
-		<build type="c-source" value="MIDI.c"/>
+		<build type="c-source" value="MIDI.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="MIDI.h"/>
+		<build type="header-file" value="MIDI.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/MassStorage/asf.xml

@@ -1,67 +1,67 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage.example.avr8">
+	<project caption="Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage.example.avr8">
-		<require idref="lufa.demos.device.class.mass_storage"/>
+		<require idref="lufa.demos.device.class.mass_storage"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage.example.xmega">
+	<project caption="Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage.example.xmega">
-		<require idref="lufa.demos.device.class.mass_storage"/>
+		<require idref="lufa.demos.device.class.mass_storage"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.mass_storage" caption="Mass Storage Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.mass_storage" caption="Mass Storage Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Mass Storage device demo, implementing a basic USB storage disk using a Dataflash memory IC. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Mass Storage device demo, implementing a basic USB storage disk using a Dataflash memory IC. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="Mass Storage Class"/>
+			<keyword value="Mass Storage Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MassStorage.txt"/>
+		<build type="distribute" subtype="user-file" value="MassStorage.txt"/>
-
+
-		<build type="c-source" value="MassStorage.c"/>
+		<build type="c-source" value="MassStorage.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="c-source" value="Lib/DataflashManager.c"/>
+		<build type="c-source" value="Lib/DataflashManager.c"/>
-		<build type="c-source" value="Lib/SCSI.c"/>
+		<build type="c-source" value="Lib/SCSI.c"/>
-		<build type="header-file" value="MassStorage.h"/>
+		<build type="header-file" value="MassStorage.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-		<build type="header-file" value="Lib/DataflashManager.h"/>
+		<build type="header-file" value="Lib/DataflashManager.h"/>
-		<build type="header-file" value="Lib/SCSI.h"/>
+		<build type="header-file" value="Lib/SCSI.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.dataflash"/>
+		<require idref="lufa.drivers.board.dataflash"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/MassStorageKeyboard/asf.xml

@@ -1,70 +1,70 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage_keyboard.example.avr8">
+	<project caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage_keyboard.example.avr8">
-		<require idref="lufa.demos.device.class.mass_storage_keyboard"/>
+		<require idref="lufa.demos.device.class.mass_storage_keyboard"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage_keyboard.example.xmega">
+	<project caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage_keyboard.example.xmega">
-		<require idref="lufa.demos.device.class.mass_storage_keyboard"/>
+		<require idref="lufa.demos.device.class.mass_storage_keyboard"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.mass_storage_keyboard" caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.mass_storage_keyboard" caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Mass Storage and Keyboard device demo, implementing a basic USB storage disk using a Dataflash memory IC, and a basic HID keyboard. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Mass Storage and Keyboard device demo, implementing a basic USB storage disk using a Dataflash memory IC, and a basic HID keyboard. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-			<keyword value="Mass Storage Class"/>
+			<keyword value="Mass Storage Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MassStorageKeyboard.txt"/>
+		<build type="distribute" subtype="user-file" value="MassStorageKeyboard.txt"/>
-
+
-		<build type="c-source" value="MassStorageKeyboard.c"/>
+		<build type="c-source" value="MassStorageKeyboard.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="c-source" value="Lib/DataflashManager.c"/>
+		<build type="c-source" value="Lib/DataflashManager.c"/>
-		<build type="c-source" value="Lib/SCSI.c"/>
+		<build type="c-source" value="Lib/SCSI.c"/>
-		<build type="header-file" value="MassStorageKeyboard.h"/>
+		<build type="header-file" value="MassStorageKeyboard.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-		<build type="header-file" value="Lib/DataflashManager.h"/>
+		<build type="header-file" value="Lib/DataflashManager.h"/>
-		<build type="header-file" value="Lib/SCSI.h"/>
+		<build type="header-file" value="Lib/SCSI.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-		<require idref="lufa.drivers.board.dataflash"/>
+		<require idref="lufa.drivers.board.dataflash"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/Mouse/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mouse.example.avr8">
+	<project caption="Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mouse.example.avr8">
-		<require idref="lufa.demos.device.class.mouse"/>
+		<require idref="lufa.demos.device.class.mouse"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mouse.example.xmega">
+	<project caption="Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mouse.example.xmega">
-		<require idref="lufa.demos.device.class.mouse"/>
+		<require idref="lufa.demos.device.class.mouse"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.mouse" caption="Mouse HID Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.mouse" caption="Mouse HID Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Mouse device demo, implementing a basic USB mouse device that can send movement information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Mouse device demo, implementing a basic USB mouse device that can send movement information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="Mouse.txt"/>
+		<build type="distribute" subtype="user-file" value="Mouse.txt"/>
-
+
-		<build type="c-source" value="Mouse.c"/>
+		<build type="c-source" value="Mouse.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="Mouse.h"/>
+		<build type="header-file" value="Mouse.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/asf.xml

@@ -1,84 +1,84 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.avr8">
+	<project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.avr8">
-		<require idref="lufa.demos.device.class.rndis"/>
+		<require idref="lufa.demos.device.class.rndis"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.xmega">
+	<project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.xmega">
-		<require idref="lufa.demos.device.class.rndis"/>
+		<require idref="lufa.demos.device.class.rndis"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.rndis" caption="RNDIS Ethernet Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.rndis" caption="RNDIS Ethernet Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="RNDIS Class"/>
+			<keyword value="RNDIS Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="RNDISEthernet.txt"/>
+		<build type="distribute" subtype="user-file" value="RNDISEthernet.txt"/>
-		<build type="distribute" subtype="user-file" value="LUFA RNDIS.inf"/>
+		<build type="distribute" subtype="user-file" value="LUFA RNDIS.inf"/>
-
+
-		<build type="c-source" value="RNDISEthernet.c"/>
+		<build type="c-source" value="RNDISEthernet.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="c-source" value="Lib/ARP.c"/>
+		<build type="c-source" value="Lib/ARP.c"/>
-		<build type="c-source" value="Lib/DHCP.c"/>
+		<build type="c-source" value="Lib/DHCP.c"/>
-		<build type="c-source" value="Lib/Ethernet.c"/>
+		<build type="c-source" value="Lib/Ethernet.c"/>
-		<build type="c-source" value="Lib/ICMP.c"/>
+		<build type="c-source" value="Lib/ICMP.c"/>
-		<build type="c-source" value="Lib/IP.c"/>
+		<build type="c-source" value="Lib/IP.c"/>
-		<build type="c-source" value="Lib/ProtocolDecoders.c"/>
+		<build type="c-source" value="Lib/ProtocolDecoders.c"/>
-		<build type="c-source" value="Lib/TCP.c"/>
+		<build type="c-source" value="Lib/TCP.c"/>
-		<build type="c-source" value="Lib/UDP.c"/>
+		<build type="c-source" value="Lib/UDP.c"/>
-		<build type="c-source" value="Lib/Webserver.c"/>
+		<build type="c-source" value="Lib/Webserver.c"/>
-		<build type="header-file" value="RNDISEthernet.h"/>
+		<build type="header-file" value="RNDISEthernet.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-		<build type="header-file" value="Lib/ARP.h"/>
+		<build type="header-file" value="Lib/ARP.h"/>
-		<build type="header-file" value="Lib/DHCP.h"/>
+		<build type="header-file" value="Lib/DHCP.h"/>
-		<build type="header-file" value="Lib/Ethernet.h"/>
+		<build type="header-file" value="Lib/Ethernet.h"/>
-		<build type="header-file" value="Lib/ICMP.h"/>
+		<build type="header-file" value="Lib/ICMP.h"/>
-		<build type="header-file" value="Lib/IP.h"/>
+		<build type="header-file" value="Lib/IP.h"/>
-		<build type="header-file" value="Lib/ProtocolDecoders.h"/>
+		<build type="header-file" value="Lib/ProtocolDecoders.h"/>
-		<build type="header-file" value="Lib/TCP.h"/>
+		<build type="header-file" value="Lib/TCP.h"/>
-		<build type="header-file" value="Lib/UDP.h"/>
+		<build type="header-file" value="Lib/UDP.h"/>
-		<build type="header-file" value="Lib/Webserver.h"/>
+		<build type="header-file" value="Lib/Webserver.h"/>
-		<build type="header-file" value="Lib/EthernetProtocols.h"/>
+		<build type="header-file" value="Lib/EthernetProtocols.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/VirtualSerial/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example.avr8">
+	<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example.avr8">
-		<require idref="lufa.demos.device.class.cdc"/>
+		<require idref="lufa.demos.device.class.cdc"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example.xmega">
+	<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example.xmega">
-		<require idref="lufa.demos.device.class.cdc"/>
+		<require idref="lufa.demos.device.class.cdc"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.cdc" caption="Virtual Serial CDC Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.cdc" caption="Virtual Serial CDC Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="CDC Class"/>
+			<keyword value="CDC Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/>
+		<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/>
-		<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/>
+		<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/>
-
+
-		<build type="c-source" value="VirtualSerial.c"/>
+		<build type="c-source" value="VirtualSerial.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="VirtualSerial.h"/>
+		<build type="header-file" value="VirtualSerial.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/asf.xml

@@ -1,70 +1,70 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_ms.example.avr8">
+	<project caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_ms.example.avr8">
-		<require idref="lufa.demos.device.class.cdc_ms"/>
+		<require idref="lufa.demos.device.class.cdc_ms"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_ms.example.xmega">
+	<project caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_ms.example.xmega">
-		<require idref="lufa.demos.device.class.cdc_ms"/>
+		<require idref="lufa.demos.device.class.cdc_ms"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.cdc_ms" caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.cdc_ms" caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Virtual Serial and Mass Storage device demo, implementing a virtual serial channel between the host PC and the device, and a basic USB storage disk using a Dataflash memory IC. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Virtual Serial and Mass Storage device demo, implementing a virtual serial channel between the host PC and the device, and a basic USB storage disk using a Dataflash memory IC. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="CDC Class"/>
+			<keyword value="CDC Class"/>
-			<keyword value="Mass Storage Class"/>
+			<keyword value="Mass Storage Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="VirtualSerialMassStorage.txt"/>
+		<build type="distribute" subtype="user-file" value="VirtualSerialMassStorage.txt"/>
-		<build type="distribute" subtype="user-file" value="LUFA VirtualSerialMassStorage.inf"/>
+		<build type="distribute" subtype="user-file" value="LUFA VirtualSerialMassStorage.inf"/>
-
+
-		<build type="c-source" value="VirtualSerialMassStorage.c"/>
+		<build type="c-source" value="VirtualSerialMassStorage.c"/>
-		<build type="c-source" value="Lib/DataflashManager.c"/>
+		<build type="c-source" value="Lib/DataflashManager.c"/>
-		<build type="c-source" value="Lib/SCSI.c"/>
+		<build type="c-source" value="Lib/SCSI.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="VirtualSerialMassStorage.h"/>
+		<build type="header-file" value="VirtualSerialMassStorage.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-		<build type="header-file" value="Lib/DataflashManager.h"/>
+		<build type="header-file" value="Lib/DataflashManager.h"/>
-		<build type="header-file" value="Lib/SCSI.h"/>
+		<build type="header-file" value="Lib/SCSI.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-		<require idref="lufa.drivers.board.dataflash"/>
+		<require idref="lufa.drivers.board.dataflash"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/ClassDriver/VirtualSerialMouse/asf.xml

@@ -1,64 +1,64 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_mouse.example.avr8">
+	<project caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_mouse.example.avr8">
-		<require idref="lufa.demos.device.class.cdc_mouse"/>
+		<require idref="lufa.demos.device.class.cdc_mouse"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_mouse.example.xmega">
+	<project caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_mouse.example.xmega">
-		<require idref="lufa.demos.device.class.cdc_mouse"/>
+		<require idref="lufa.demos.device.class.cdc_mouse"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.class.cdc_mouse" caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.device.class.cdc_mouse" caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Virtual Serial and Mouse device demo, implementing a virtual serial channel between the host PC and the device, and a USB mouse. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Virtual Serial and Mouse device demo, implementing a virtual serial channel between the host PC and the device, and a USB mouse. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="CDC Class"/>
+			<keyword value="CDC Class"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="VirtualSerialMouse.txt"/>
+		<build type="distribute" subtype="user-file" value="VirtualSerialMouse.txt"/>
-		<build type="distribute" subtype="user-file" value="LUFA VirtualSerialMouse.inf"/>
+		<build type="distribute" subtype="user-file" value="LUFA VirtualSerialMouse.inf"/>
-
+
-		<build type="c-source" value="VirtualSerialMouse.c"/>
+		<build type="c-source" value="VirtualSerialMouse.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="VirtualSerialMouse.h"/>
+		<build type="header-file" value="VirtualSerialMouse.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/LowLevel/AudioInput/asf.xml

@@ -1,52 +1,52 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Audio Input Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_input.example.avr8">
+	<project caption="Audio Input Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_input.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.audio_input"/>
+		<require idref="lufa.demos.device.lowlevel.audio_input"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.lowlevel.audio_input" caption="Audio Input Device Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.device.lowlevel.audio_input" caption="Audio Input Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="Audio Class"/>
+			<keyword value="Audio Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="AudioInput.txt"/>
+		<build type="distribute" subtype="user-file" value="AudioInput.txt"/>
-
+
-		<build type="c-source" value="AudioInput.c"/>
+		<build type="c-source" value="AudioInput.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="AudioInput.h"/>
+		<build type="header-file" value="AudioInput.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.adc"/>
+		<require idref="lufa.drivers.peripheral.adc"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/LowLevel/AudioOutput/asf.xml

@@ -1,51 +1,51 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Audio Output Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_output.example.avr8">
+	<project caption="Audio Output Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_output.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.audio_output"/>
+		<require idref="lufa.demos.device.lowlevel.audio_output"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.lowlevel.audio_output" caption="Audio Output Device Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.device.lowlevel.audio_output" caption="Audio Output Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="Audio Class"/>
+			<keyword value="Audio Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="AudioOutput.txt"/>
+		<build type="distribute" subtype="user-file" value="AudioOutput.txt"/>
-
+
-		<build type="c-source" value="AudioOutput.c"/>
+		<build type="c-source" value="AudioOutput.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="AudioOutput.h"/>
+		<build type="header-file" value="AudioOutput.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/LowLevel/DualVirtualSerial/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.avr8">
+	<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.dual_cdc"/>
+		<require idref="lufa.demos.device.lowlevel.dual_cdc"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.xmega">
+	<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.xmega">
-		<require idref="lufa.demos.device.lowlevel.dual_cdc"/>
+		<require idref="lufa.demos.device.lowlevel.dual_cdc"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.lowlevel.dual_cdc" caption="Dual Virtual Serial Device Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.device.lowlevel.dual_cdc" caption="Dual Virtual Serial Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Dual Virtual Serial (CDC) demo, implementing a pair of virtual serial port interfaces. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Dual Virtual Serial (CDC) demo, implementing a pair of virtual serial port interfaces. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="CDC Class"/>
+			<keyword value="CDC Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="DualVirtualSerial.txt"/>
+		<build type="distribute" subtype="user-file" value="DualVirtualSerial.txt"/>
-		<build type="distribute" subtype="user-file" value="LUFA DualVirtualSerial.inf"/>
+		<build type="distribute" subtype="user-file" value="LUFA DualVirtualSerial.inf"/>
-
+
-		<build type="c-source" value="DualVirtualSerial.c"/>
+		<build type="c-source" value="DualVirtualSerial.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="DualVirtualSerial.h"/>
+		<build type="header-file" value="DualVirtualSerial.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/LowLevel/GenericHID/asf.xml

@@ -1,63 +1,63 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.avr8">
+	<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.generic_hid"/>
+		<require idref="lufa.demos.device.lowlevel.generic_hid"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.xmega">
+	<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.xmega">
-		<require idref="lufa.demos.device.lowlevel.generic_hid"/>
+		<require idref="lufa.demos.device.lowlevel.generic_hid"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.lowlevel.generic_hid" caption="Generic HID Device Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.device.lowlevel.generic_hid" caption="Generic HID Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Generic HID device demo, implementing a device whose LEDs can be controlled via HID messages from the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Generic HID device demo, implementing a device whose LEDs can be controlled via HID messages from the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="GenericHID.txt"/>
+		<build type="distribute" subtype="user-file" value="GenericHID.txt"/>
-		<build type="distribute" subtype="directory" value="HostTestApp"/>
+		<build type="distribute" subtype="directory" value="HostTestApp"/>
-
+
-		<build type="c-source" value="GenericHID.c"/>
+		<build type="c-source" value="GenericHID.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="GenericHID.h"/>
+		<build type="header-file" value="GenericHID.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/LowLevel/Joystick/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.avr8">
+	<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.joystick"/>
+		<require idref="lufa.demos.device.lowlevel.joystick"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.xmega">
+	<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.xmega">
-		<require idref="lufa.demos.device.lowlevel.joystick"/>
+		<require idref="lufa.demos.device.lowlevel.joystick"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.lowlevel.joystick" caption="Joystick HID Device Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.device.lowlevel.joystick" caption="Joystick HID Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Joystick HID device demo, implementing a basic USB joystick that can send movement information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Joystick HID device demo, implementing a basic USB joystick that can send movement information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="Joystick.txt"/>
+		<build type="distribute" subtype="user-file" value="Joystick.txt"/>
-
+
-		<build type="c-source" value="Joystick.c"/>
+		<build type="c-source" value="Joystick.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="Joystick.h"/>
+		<build type="header-file" value="Joystick.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/LowLevel/Keyboard/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.avr8">
+	<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.keyboard"/>
+		<require idref="lufa.demos.device.lowlevel.keyboard"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.xmega">
+	<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.xmega">
-		<require idref="lufa.demos.device.lowlevel.keyboard"/>
+		<require idref="lufa.demos.device.lowlevel.keyboard"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.lowlevel.keyboard" caption="Keyboard HID Device Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.device.lowlevel.keyboard" caption="Keyboard HID Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="Keyboard.txt"/>
+		<build type="distribute" subtype="user-file" value="Keyboard.txt"/>
-
+
-		<build type="c-source" value="Keyboard.c"/>
+		<build type="c-source" value="Keyboard.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="Keyboard.h"/>
+		<build type="header-file" value="Keyboard.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/LowLevel/KeyboardMouse/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.avr8">
+	<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/>
+		<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.xmega">
+	<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.xmega">
-		<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/>
+		<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.lowlevel.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.device.lowlevel.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="KeyboardMouse.txt"/>
+		<build type="distribute" subtype="user-file" value="KeyboardMouse.txt"/>
-
+
-		<build type="c-source" value="KeyboardMouse.c"/>
+		<build type="c-source" value="KeyboardMouse.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="KeyboardMouse.h"/>
+		<build type="header-file" value="KeyboardMouse.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/LowLevel/MIDI/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.avr8">
+	<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.midi"/>
+		<require idref="lufa.demos.device.lowlevel.midi"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.xmega">
+	<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.xmega">
-		<require idref="lufa.demos.device.lowlevel.midi"/>
+		<require idref="lufa.demos.device.lowlevel.midi"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.lowlevel.midi" caption="MIDI Device Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.device.lowlevel.midi" caption="MIDI Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		MIDI device demo, implementing a basic USB MIDI device that can send messages to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		MIDI device demo, implementing a basic USB MIDI device that can send messages to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="MIDI Class"/>
+			<keyword value="MIDI Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MIDI.txt"/>
+		<build type="distribute" subtype="user-file" value="MIDI.txt"/>
-
+
-		<build type="c-source" value="MIDI.c"/>
+		<build type="c-source" value="MIDI.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="MIDI.h"/>
+		<build type="header-file" value="MIDI.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/LowLevel/MassStorage/asf.xml

@@ -1,67 +1,67 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.avr8">
+	<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.mass_storage"/>
+		<require idref="lufa.demos.device.lowlevel.mass_storage"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.xmega">
+	<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.xmega">
-		<require idref="lufa.demos.device.lowlevel.mass_storage"/>
+		<require idref="lufa.demos.device.lowlevel.mass_storage"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.lowlevel.mass_storage" caption="Mass Storage Device Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.device.lowlevel.mass_storage" caption="Mass Storage Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Mass Storage device demo, implementing a basic USB storage disk using a Dataflash memory IC. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Mass Storage device demo, implementing a basic USB storage disk using a Dataflash memory IC. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="Mass Storage Class"/>
+			<keyword value="Mass Storage Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MassStorage.txt"/>
+		<build type="distribute" subtype="user-file" value="MassStorage.txt"/>
-
+
-		<build type="c-source" value="MassStorage.c"/>
+		<build type="c-source" value="MassStorage.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="c-source" value="Lib/DataflashManager.c"/>
+		<build type="c-source" value="Lib/DataflashManager.c"/>
-		<build type="c-source" value="Lib/SCSI.c"/>
+		<build type="c-source" value="Lib/SCSI.c"/>
-		<build type="header-file" value="MassStorage.h"/>
+		<build type="header-file" value="MassStorage.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-		<build type="header-file" value="Lib/DataflashManager.h"/>
+		<build type="header-file" value="Lib/DataflashManager.h"/>
-		<build type="header-file" value="Lib/SCSI.h"/>
+		<build type="header-file" value="Lib/SCSI.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.dataflash"/>
+		<require idref="lufa.drivers.board.dataflash"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/LowLevel/Mouse/asf.xml

@@ -1,62 +1,62 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.avr8">
+	<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.mouse"/>
+		<require idref="lufa.demos.device.lowlevel.mouse"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.xmega">
+	<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.xmega">
-		<require idref="lufa.demos.device.lowlevel.mouse"/>
+		<require idref="lufa.demos.device.lowlevel.mouse"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.lowlevel.mouse" caption="Mouse HID Device Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.device.lowlevel.mouse" caption="Mouse HID Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Mouse device demo, implementing a basic USB mouse device that can send movement information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Mouse device demo, implementing a basic USB mouse device that can send movement information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="Mouse.txt"/>
+		<build type="distribute" subtype="user-file" value="Mouse.txt"/>
-
+
-		<build type="c-source" value="Mouse.c"/>
+		<build type="c-source" value="Mouse.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="Mouse.h"/>
+		<build type="header-file" value="Mouse.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/LowLevel/RNDISEthernet/asf.xml

@@ -1,86 +1,86 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.avr8">
+	<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.rndis"/>
+		<require idref="lufa.demos.device.lowlevel.rndis"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.xmega">
+	<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.xmega">
-		<require idref="lufa.demos.device.lowlevel.rndis"/>
+		<require idref="lufa.demos.device.lowlevel.rndis"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.lowlevel.rndis" caption="RNDIS Ethernet Device Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.device.lowlevel.rndis" caption="RNDIS Ethernet Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="RNDIS Class"/>
+			<keyword value="RNDIS Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="RNDISEthernet.txt"/>
+		<build type="distribute" subtype="user-file" value="RNDISEthernet.txt"/>
-		<build type="distribute" subtype="user-file" value="LUFA RNDIS.inf"/>
+		<build type="distribute" subtype="user-file" value="LUFA RNDIS.inf"/>
-
+
-		<build type="c-source" value="RNDISEthernet.c"/>
+		<build type="c-source" value="RNDISEthernet.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="c-source" value="Lib/ARP.c"/>
+		<build type="c-source" value="Lib/ARP.c"/>
-		<build type="c-source" value="Lib/DHCP.c"/>
+		<build type="c-source" value="Lib/DHCP.c"/>
-		<build type="c-source" value="Lib/Ethernet.c"/>
+		<build type="c-source" value="Lib/Ethernet.c"/>
-		<build type="c-source" value="Lib/ICMP.c"/>
+		<build type="c-source" value="Lib/ICMP.c"/>
-		<build type="c-source" value="Lib/IP.c"/>
+		<build type="c-source" value="Lib/IP.c"/>
-		<build type="c-source" value="Lib/ProtocolDecoders.c"/>
+		<build type="c-source" value="Lib/ProtocolDecoders.c"/>
-		<build type="c-source" value="Lib/RNDIS.c"/>
+		<build type="c-source" value="Lib/RNDIS.c"/>
-		<build type="c-source" value="Lib/TCP.c"/>
+		<build type="c-source" value="Lib/TCP.c"/>
-		<build type="c-source" value="Lib/UDP.c"/>
+		<build type="c-source" value="Lib/UDP.c"/>
-		<build type="c-source" value="Lib/Webserver.c"/>
+		<build type="c-source" value="Lib/Webserver.c"/>
-		<build type="header-file" value="RNDISEthernet.h"/>
+		<build type="header-file" value="RNDISEthernet.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-		<build type="header-file" value="Lib/ARP.h"/>
+		<build type="header-file" value="Lib/ARP.h"/>
-		<build type="header-file" value="Lib/DHCP.h"/>
+		<build type="header-file" value="Lib/DHCP.h"/>
-		<build type="header-file" value="Lib/Ethernet.h"/>
+		<build type="header-file" value="Lib/Ethernet.h"/>
-		<build type="header-file" value="Lib/ICMP.h"/>
+		<build type="header-file" value="Lib/ICMP.h"/>
-		<build type="header-file" value="Lib/IP.h"/>
+		<build type="header-file" value="Lib/IP.h"/>
-		<build type="header-file" value="Lib/ProtocolDecoders.h"/>
+		<build type="header-file" value="Lib/ProtocolDecoders.h"/>
-		<build type="header-file" value="Lib/RNDIS.h"/>
+		<build type="header-file" value="Lib/RNDIS.h"/>
-		<build type="header-file" value="Lib/TCP.h"/>
+		<build type="header-file" value="Lib/TCP.h"/>
-		<build type="header-file" value="Lib/UDP.h"/>
+		<build type="header-file" value="Lib/UDP.h"/>
-		<build type="header-file" value="Lib/Webserver.h"/>
+		<build type="header-file" value="Lib/Webserver.h"/>
-		<build type="header-file" value="Lib/EthernetProtocols.h"/>
+		<build type="header-file" value="Lib/EthernetProtocols.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Device/LowLevel/VirtualSerial/asf.xml

@@ -1,63 +1,63 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.avr8">
+	<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.avr8">
-		<require idref="lufa.demos.device.lowlevel.cdc"/>
+		<require idref="lufa.demos.device.lowlevel.cdc"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.xmega">
+	<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.xmega">
-		<require idref="lufa.demos.device.lowlevel.cdc"/>
+		<require idref="lufa.demos.device.lowlevel.cdc"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="atxmega128a1u"/>
+		<device-support value="atxmega128a1u"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.device.lowlevel.cdc" caption="Virtual Serial CDC Device Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.device.lowlevel.cdc" caption="Virtual Serial CDC Device Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="CDC Class"/>
+			<keyword value="CDC Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/>
+		<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/>
-		<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/>
+		<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/>
-
+
-		<build type="c-source" value="VirtualSerial.c"/>
+		<build type="c-source" value="VirtualSerial.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="VirtualSerial.h"/>
+		<build type="header-file" value="VirtualSerial.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml

@@ -1,56 +1,56 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)" id="lufa.demos.dualrole.class.mouse.example.avr8">
+	<project caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)" id="lufa.demos.dualrole.class.mouse.example.avr8">
-		<require idref="lufa.demos.dualrole.class.mouse"/>
+		<require idref="lufa.demos.dualrole.class.mouse"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.dualrole.class.mouse" caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.dualrole.class.mouse" caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Mouse host and device dual role demo, implementing a basic mouse device and host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Mouse host and device dual role demo, implementing a basic mouse device and host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Dual Role"/>
+			<keyword value="USB Dual Role"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MouseHostDevice.txt"/>
+		<build type="distribute" subtype="user-file" value="MouseHostDevice.txt"/>
-
+
-		<build type="c-source" value="MouseHostDevice.c"/>
+		<build type="c-source" value="MouseHostDevice.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="c-source" value="DeviceFunctions.c"/>
+		<build type="c-source" value="DeviceFunctions.c"/>
-		<build type="c-source" value="HostFunctions.c"/>
+		<build type="c-source" value="HostFunctions.c"/>
-		<build type="header-file" value="MouseHostDevice.h"/>
+		<build type="header-file" value="MouseHostDevice.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-		<build type="header-file" value="DeviceFunctions.h"/>
+		<build type="header-file" value="DeviceFunctions.h"/>
-		<build type="header-file" value="HostFunctions.h"/>
+		<build type="header-file" value="HostFunctions.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/AndroidAccessoryHost/asf.xml

@@ -1,49 +1,49 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Android Accessory Host Demo (Class Driver APIs)" id="lufa.demos.host.class.android.example.avr8">
+	<project caption="Android Accessory Host Demo (Class Driver APIs)" id="lufa.demos.host.class.android.example.avr8">
-		<require idref="lufa.demos.host.class.android"/>
+		<require idref="lufa.demos.host.class.android"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.android" caption="Android Accessory Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.android" caption="Android Accessory Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Android Accessory Host demo, implementing a basic USB device whose LEDs can be controlled via an Android device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Android Accessory Host demo, implementing a basic USB device whose LEDs can be controlled via an Android device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Android Accessory Class"/>
+			<keyword value="Android Accessory Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="AndroidAccessoryHost.txt"/>
+		<build type="distribute" subtype="user-file" value="AndroidAccessoryHost.txt"/>
-		<build type="distribute" subtype="directory" value="AndroidHostApp"/>
+		<build type="distribute" subtype="directory" value="AndroidHostApp"/>
-
+
-		<build type="c-source" value="AndroidAccessoryHost.c"/>
+		<build type="c-source" value="AndroidAccessoryHost.c"/>
-		<build type="header-file" value="AndroidAccessoryHost.h"/>
+		<build type="header-file" value="AndroidAccessoryHost.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/AudioInputHost/asf.xml

@@ -1,48 +1,48 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Audio Input Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_input.example.avr8">
+	<project caption="Audio Input Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_input.example.avr8">
-		<require idref="lufa.demos.host.class.audio_input"/>
+		<require idref="lufa.demos.host.class.audio_input"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.audio_input" caption="Audio Input Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.audio_input" caption="Audio Input Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Audio Input Host demo, implementing a basic USB audio sink that can output incoming audio data to a speaker. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Audio Input Host demo, implementing a basic USB audio sink that can output incoming audio data to a speaker. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Audio Class"/>
+			<keyword value="Audio Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="AudioInputHost.txt"/>
+		<build type="distribute" subtype="user-file" value="AudioInputHost.txt"/>
-
+
-		<build type="c-source" value="AudioInputHost.c"/>
+		<build type="c-source" value="AudioInputHost.c"/>
-		<build type="header-file" value="AudioInputHost.h"/>
+		<build type="header-file" value="AudioInputHost.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/AudioOutputHost/asf.xml

@@ -1,52 +1,52 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Audio Output Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_output.example.avr8">
+	<project caption="Audio Output Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_output.example.avr8">
-		<require idref="lufa.demos.host.class.audio_output"/>
+		<require idref="lufa.demos.host.class.audio_output"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.audio_output" caption="Audio Output Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.audio_output" caption="Audio Output Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Audio Output Host demo, implementing a basic USB audio source that can output audio data to an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Audio Output Host demo, implementing a basic USB audio source that can output audio data to an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Audio Class"/>
+			<keyword value="Audio Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="AudioOutputHost.txt"/>
+		<build type="distribute" subtype="user-file" value="AudioOutputHost.txt"/>
-
+
-		<build type="c-source" value="AudioOutputHost.c"/>
+		<build type="c-source" value="AudioOutputHost.c"/>
-		<build type="header-file" value="AudioOutputHost.h"/>
+		<build type="header-file" value="AudioOutputHost.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.peripheral.adc"/>
+		<require idref="lufa.drivers.peripheral.adc"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/JoystickHostWithParser/asf.xml

@@ -1,48 +1,48 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Joystick HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.joystick_parser.example.avr8">
+	<project caption="Joystick HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.joystick_parser.example.avr8">
-		<require idref="lufa.demos.host.class.joystick_parser"/>
+		<require idref="lufa.demos.host.class.joystick_parser"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.joystick_parser" caption="Joystick HID (with parser) Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.joystick_parser" caption="Joystick HID (with parser) Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Joystick HID Host demo with HID parser, implementing a basic USB joystick host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Joystick HID Host demo with HID parser, implementing a basic USB joystick host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="JoystickHostWithParser.txt"/>
+		<build type="distribute" subtype="user-file" value="JoystickHostWithParser.txt"/>
-
+
-		<build type="c-source" value="JoystickHostWithParser.c"/>
+		<build type="c-source" value="JoystickHostWithParser.c"/>
-		<build type="header-file" value="JoystickHostWithParser.h"/>
+		<build type="header-file" value="JoystickHostWithParser.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/KeyboardHost/asf.xml

@@ -1,48 +1,48 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Keyboard HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard.example.avr8">
+	<project caption="Keyboard HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard.example.avr8">
-		<require idref="lufa.demos.host.class.keyboard"/>
+		<require idref="lufa.demos.host.class.keyboard"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.keyboard" caption="Keyboard HID Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.keyboard" caption="Keyboard HID Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Keyboard HID Host demo, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Keyboard HID Host demo, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="KeyboardHost.txt"/>
+		<build type="distribute" subtype="user-file" value="KeyboardHost.txt"/>
-
+
-		<build type="c-source" value="KeyboardHost.c"/>
+		<build type="c-source" value="KeyboardHost.c"/>
-		<build type="header-file" value="KeyboardHost.h"/>
+		<build type="header-file" value="KeyboardHost.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/KeyboardHostWithParser/asf.xml

@@ -1,48 +1,48 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard_parser.example.avr8">
+	<project caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard_parser.example.avr8">
-		<require idref="lufa.demos.host.class.keyboard_parser"/>
+		<require idref="lufa.demos.host.class.keyboard_parser"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.keyboard_parser" caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.keyboard_parser" caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Keyboard HID Host demo with HID parser, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Keyboard HID Host demo with HID parser, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="KeyboardHostWithParser.txt"/>
+		<build type="distribute" subtype="user-file" value="KeyboardHostWithParser.txt"/>
-
+
-		<build type="c-source" value="KeyboardHostWithParser.c"/>
+		<build type="c-source" value="KeyboardHostWithParser.c"/>
-		<build type="header-file" value="KeyboardHostWithParser.h"/>
+		<build type="header-file" value="KeyboardHostWithParser.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/MIDIHost/asf.xml

@@ -1,50 +1,50 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="MIDI Host Demo (Class Driver APIs)" id="lufa.demos.host.class.midi.example.avr8">
+	<project caption="MIDI Host Demo (Class Driver APIs)" id="lufa.demos.host.class.midi.example.avr8">
-		<require idref="lufa.demos.host.class.midi"/>
+		<require idref="lufa.demos.host.class.midi"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.midi" caption="MIDI Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.midi" caption="MIDI Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		MIDI Host demo, capable of sending and receiving MIDI messages to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		MIDI Host demo, capable of sending and receiving MIDI messages to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="MIDI Class"/>
+			<keyword value="MIDI Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MIDIHost.txt"/>
+		<build type="distribute" subtype="user-file" value="MIDIHost.txt"/>
-
+
-		<build type="c-source" value="MIDIHost.c"/>
+		<build type="c-source" value="MIDIHost.c"/>
-		<build type="header-file" value="MIDIHost.h"/>
+		<build type="header-file" value="MIDIHost.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/MassStorageHost/asf.xml

@@ -1,48 +1,48 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mass Storage Host Demo (Class Driver APIs)" id="lufa.demos.host.class.ms.example.avr8">
+	<project caption="Mass Storage Host Demo (Class Driver APIs)" id="lufa.demos.host.class.ms.example.avr8">
-		<require idref="lufa.demos.host.class.ms"/>
+		<require idref="lufa.demos.host.class.ms"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.ms" caption="Mass Storage Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.ms" caption="Mass Storage Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Mass Storage Host demo, capable of reading and writing raw 512 byte segments to the device's serial port. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Mass Storage Host demo, capable of reading and writing raw 512 byte segments to the device's serial port. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Mass Storage Class"/>
+			<keyword value="Mass Storage Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MassStorageHost.txt"/>
+		<build type="distribute" subtype="user-file" value="MassStorageHost.txt"/>
-
+
-		<build type="c-source" value="MassStorageHost.c"/>
+		<build type="c-source" value="MassStorageHost.c"/>
-		<build type="header-file" value="MassStorageHost.h"/>
+		<build type="header-file" value="MassStorageHost.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/MouseHost/asf.xml

@@ -1,48 +1,48 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mouse HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse.example.avr8">
+	<project caption="Mouse HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse.example.avr8">
-		<require idref="lufa.demos.host.class.mouse"/>
+		<require idref="lufa.demos.host.class.mouse"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.mouse" caption="Mouse HID Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.mouse" caption="Mouse HID Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Mouse HID Host demo, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Mouse HID Host demo, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MouseHost.txt"/>
+		<build type="distribute" subtype="user-file" value="MouseHost.txt"/>
-
+
-		<build type="c-source" value="MouseHost.c"/>
+		<build type="c-source" value="MouseHost.c"/>
-		<build type="header-file" value="MouseHost.h"/>
+		<build type="header-file" value="MouseHost.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/MouseHostWithParser/asf.xml

@@ -1,48 +1,48 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mouse HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse_parser.example.avr8">
+	<project caption="Mouse HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse_parser.example.avr8">
-		<require idref="lufa.demos.host.class.mouse_parser"/>
+		<require idref="lufa.demos.host.class.mouse_parser"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.mouse_parser" caption="Mouse HID (with parser) Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.mouse_parser" caption="Mouse HID (with parser) Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Mouse HID Host demo with HID parser, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Mouse HID Host demo with HID parser, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MouseHostWithParser.txt"/>
+		<build type="distribute" subtype="user-file" value="MouseHostWithParser.txt"/>
-
+
-		<build type="c-source" value="MouseHostWithParser.c"/>
+		<build type="c-source" value="MouseHostWithParser.c"/>
-		<build type="header-file" value="MouseHostWithParser.h"/>
+		<build type="header-file" value="MouseHostWithParser.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/PrinterHost/asf.xml

@@ -1,48 +1,48 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Printer Host Demo (Class Driver APIs)" id="lufa.demos.host.class.printer.example.avr8">
+	<project caption="Printer Host Demo (Class Driver APIs)" id="lufa.demos.host.class.printer.example.avr8">
-		<require idref="lufa.demos.host.class.printer"/>
+		<require idref="lufa.demos.host.class.printer"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.printer" caption="Printer Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.printer" caption="Printer Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Printer Host demo, implementing a basic USB printer host that can send raw printer control data to an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Printer Host demo, implementing a basic USB printer host that can send raw printer control data to an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Printer Class"/>
+			<keyword value="Printer Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="PrinterHost.txt"/>
+		<build type="distribute" subtype="user-file" value="PrinterHost.txt"/>
-
+
-		<build type="c-source" value="PrinterHost.c"/>
+		<build type="c-source" value="PrinterHost.c"/>
-		<build type="header-file" value="PrinterHost.h"/>
+		<build type="header-file" value="PrinterHost.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/RNDISEthernetHost/asf.xml

@@ -1,48 +1,48 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="RNDIS Ethernet Host Demo (Class Driver APIs)" id="lufa.demos.host.class.rndis.example.avr8">
+	<project caption="RNDIS Ethernet Host Demo (Class Driver APIs)" id="lufa.demos.host.class.rndis.example.avr8">
-		<require idref="lufa.demos.host.class.rndis"/>
+		<require idref="lufa.demos.host.class.rndis"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.rndis" caption="RNDIS Ethernet Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.rndis" caption="RNDIS Ethernet Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Microsoft RNDIS Ethernet Host demo, implementing a RNDIS host that can send and receive Ethernet data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Microsoft RNDIS Ethernet Host demo, implementing a RNDIS host that can send and receive Ethernet data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="RNDIS Class"/>
+			<keyword value="RNDIS Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="RNDISEthernetHost.txt"/>
+		<build type="distribute" subtype="user-file" value="RNDISEthernetHost.txt"/>
-
+
-		<build type="c-source" value="RNDISEthernetHost.c"/>
+		<build type="c-source" value="RNDISEthernetHost.c"/>
-		<build type="header-file" value="RNDISEthernetHost.h"/>
+		<build type="header-file" value="RNDISEthernetHost.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/StillImageHost/asf.xml

@@ -1,48 +1,48 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Still Image Host Demo (Class Driver APIs)" id="lufa.demos.host.class.si.example.avr8">
+	<project caption="Still Image Host Demo (Class Driver APIs)" id="lufa.demos.host.class.si.example.avr8">
-		<require idref="lufa.demos.host.class.si"/>
+		<require idref="lufa.demos.host.class.si"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.si" caption="Still Image Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.si" caption="Still Image Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Still Image Host demo, implementing a Still Image host that can send and receive PIMA data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Still Image Host demo, implementing a Still Image host that can send and receive PIMA data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Still Image Class"/>
+			<keyword value="Still Image Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="StillImageHost.txt"/>
+		<build type="distribute" subtype="user-file" value="StillImageHost.txt"/>
-
+
-		<build type="c-source" value="StillImageHost.c"/>
+		<build type="c-source" value="StillImageHost.c"/>
-		<build type="header-file" value="StillImageHost.h"/>
+		<build type="header-file" value="StillImageHost.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/ClassDriver/VirtualSerialHost/asf.xml

@@ -1,48 +1,48 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Virtual Serial CDC Host Demo (Class Driver APIs)" id="lufa.demos.host.class.cdc.example.avr8">
+	<project caption="Virtual Serial CDC Host Demo (Class Driver APIs)" id="lufa.demos.host.class.cdc.example.avr8">
-		<require idref="lufa.demos.host.class.cdc"/>
+		<require idref="lufa.demos.host.class.cdc"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.class.cdc" caption="Virtual Serial CDC Host Demo (Class Driver APIs)">
+	<module type="application" id="lufa.demos.host.class.cdc" caption="Virtual Serial CDC Host Demo (Class Driver APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Virtual Serial Host demo, implementing a CDC host that can send and receive data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
+		Virtual Serial Host demo, implementing a CDC host that can send and receive data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="CDC Class"/>
+			<keyword value="CDC Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="VirtualSerialHost.txt"/>
+		<build type="distribute" subtype="user-file" value="VirtualSerialHost.txt"/>
-
+
-		<build type="c-source" value="VirtualSerialHost.c"/>
+		<build type="c-source" value="VirtualSerialHost.c"/>
-		<build type="header-file" value="VirtualSerialHost.h"/>
+		<build type="header-file" value="VirtualSerialHost.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/AndroidAccessoryHost/asf.xml

@@ -1,55 +1,55 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Android Accessory Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.android.example.avr8">
+	<project caption="Android Accessory Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.android.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.android"/>
+		<require idref="lufa.demos.host.lowlevel.android"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.android" caption="Android Accessory Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.android" caption="Android Accessory Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Android Accessory Host demo, implementing a basic USB device whose LEDs can be controlled via an Android device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Android Accessory Host demo, implementing a basic USB device whose LEDs can be controlled via an Android device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Android Accessory Class"/>
+			<keyword value="Android Accessory Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="AndroidAccessoryHost.txt"/>
+		<build type="distribute" subtype="user-file" value="AndroidAccessoryHost.txt"/>
-
+
-		<build type="c-source" value="AndroidAccessoryHost.c"/>
+		<build type="c-source" value="AndroidAccessoryHost.c"/>
-		<build type="c-source" value="DeviceDescriptor.c"/>
+		<build type="c-source" value="DeviceDescriptor.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="header-file" value="AndroidAccessoryHost.h"/>
+		<build type="header-file" value="AndroidAccessoryHost.h"/>
-		<build type="header-file" value="DeviceDescriptor.h"/>
+		<build type="header-file" value="DeviceDescriptor.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-
+
-		<build type="c-source" value="Lib/AndroidAccessoryCommands.c"/>
+		<build type="c-source" value="Lib/AndroidAccessoryCommands.c"/>
-		<build type="header-file" value="Lib/AndroidAccessoryCommands.h"/>
+		<build type="header-file" value="Lib/AndroidAccessoryCommands.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/AudioInputHost/asf.xml

@@ -1,50 +1,50 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Audio Input Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_input.example.avr8">
+	<project caption="Audio Input Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_input.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.audio_input"/>
+		<require idref="lufa.demos.host.lowlevel.audio_input"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.audio_input" caption="Audio Input Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.audio_input" caption="Audio Input Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Audio Input Host demo, implementing a basic USB audio sink that can output incoming audio data to a speaker. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Audio Input Host demo, implementing a basic USB audio sink that can output incoming audio data to a speaker. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Audio Class"/>
+			<keyword value="Audio Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="AudioInputHost.txt"/>
+		<build type="distribute" subtype="user-file" value="AudioInputHost.txt"/>
-
+
-		<build type="c-source" value="AudioInputHost.c"/>
+		<build type="c-source" value="AudioInputHost.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="header-file" value="AudioInputHost.h"/>
+		<build type="header-file" value="AudioInputHost.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/AudioOutputHost/asf.xml

@@ -1,54 +1,54 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Audio Output Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_output.example.avr8">
+	<project caption="Audio Output Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_output.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.audio_output"/>
+		<require idref="lufa.demos.host.lowlevel.audio_output"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.audio_output" caption="Audio Output Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.audio_output" caption="Audio Output Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Audio Output Host demo, implementing a basic USB audio source that can output audio data to an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Audio Output Host demo, implementing a basic USB audio source that can output audio data to an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Audio Class"/>
+			<keyword value="Audio Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="AudioOutputHost.txt"/>
+		<build type="distribute" subtype="user-file" value="AudioOutputHost.txt"/>
-
+
-		<build type="c-source" value="AudioOutputHost.c"/>
+		<build type="c-source" value="AudioOutputHost.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="header-file" value="AudioOutputHost.h"/>
+		<build type="header-file" value="AudioOutputHost.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
+		<build type="module-config" subtype="required-header-file" value="AppConfig.h"/>
-		<build type="header-file" value="Config/AppConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.peripheral.adc"/>
+		<require idref="lufa.drivers.peripheral.adc"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/GenericHIDHost/asf.xml

@@ -1,50 +1,50 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Generic HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.generic_hid.example.avr8">
+	<project caption="Generic HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.generic_hid.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.generic_hid"/>
+		<require idref="lufa.demos.host.lowlevel.generic_hid"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.generic_hid" caption="Generic HID Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.generic_hid" caption="Generic HID Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Generic HID Host demo, implementing a basic USB HID device that can send and receive data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Generic HID Host demo, implementing a basic USB HID device that can send and receive data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="GenericHIDHost.txt"/>
+		<build type="distribute" subtype="user-file" value="GenericHIDHost.txt"/>
-
+
-		<build type="c-source" value="GenericHIDHost.c"/>
+		<build type="c-source" value="GenericHIDHost.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="header-file" value="GenericHIDHost.h"/>
+		<build type="header-file" value="GenericHIDHost.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/JoystickHostWithParser/asf.xml

@@ -1,52 +1,52 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Joystick HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.joystick_parser.example.avr8">
+	<project caption="Joystick HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.joystick_parser.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.joystick_parser"/>
+		<require idref="lufa.demos.host.lowlevel.joystick_parser"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.joystick_parser" caption="Joystick HID (with parser) Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.joystick_parser" caption="Joystick HID (with parser) Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Joystick HID Host demo with HID parser, implementing a basic USB joystick host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Joystick HID Host demo with HID parser, implementing a basic USB joystick host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="JoystickHostWithParser.txt"/>
+		<build type="distribute" subtype="user-file" value="JoystickHostWithParser.txt"/>
-
+
-		<build type="c-source" value="JoystickHostWithParser.c"/>
+		<build type="c-source" value="JoystickHostWithParser.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="c-source" value="HIDReport.c"/>
+		<build type="c-source" value="HIDReport.c"/>
-		<build type="header-file" value="JoystickHostWithParser.h"/>
+		<build type="header-file" value="JoystickHostWithParser.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-		<build type="header-file" value="HIDReport.h"/>
+		<build type="header-file" value="HIDReport.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/KeyboardHost/asf.xml

@@ -1,50 +1,50 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Keyboard HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard.example.avr8">
+	<project caption="Keyboard HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.keyboard"/>
+		<require idref="lufa.demos.host.lowlevel.keyboard"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.keyboard" caption="Keyboard HID Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.keyboard" caption="Keyboard HID Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Keyboard HID Host demo, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Keyboard HID Host demo, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="KeyboardHost.txt"/>
+		<build type="distribute" subtype="user-file" value="KeyboardHost.txt"/>
-
+
-		<build type="c-source" value="KeyboardHost.c"/>
+		<build type="c-source" value="KeyboardHost.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="header-file" value="KeyboardHost.h"/>
+		<build type="header-file" value="KeyboardHost.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/KeyboardHostWithParser/asf.xml

@@ -1,52 +1,52 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Keyboard HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard_parser.example.avr8">
+	<project caption="Keyboard HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard_parser.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.keyboard_parser"/>
+		<require idref="lufa.demos.host.lowlevel.keyboard_parser"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.keyboard_parser" caption="Keyboard HID (with parser) Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.keyboard_parser" caption="Keyboard HID (with parser) Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Keyboard HID Host demo with HID parser, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Keyboard HID Host demo with HID parser, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="KeyboardHostWithParser.txt"/>
+		<build type="distribute" subtype="user-file" value="KeyboardHostWithParser.txt"/>
-
+
-		<build type="c-source" value="KeyboardHostWithParser.c"/>
+		<build type="c-source" value="KeyboardHostWithParser.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="c-source" value="HIDReport.c"/>
+		<build type="c-source" value="HIDReport.c"/>
-		<build type="header-file" value="KeyboardHostWithParser.h"/>
+		<build type="header-file" value="KeyboardHostWithParser.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-		<build type="header-file" value="HIDReport.h"/>
+		<build type="header-file" value="HIDReport.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/MIDIHost/asf.xml

@@ -1,52 +1,52 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="MIDI Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.midi.example.avr8">
+	<project caption="MIDI Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.midi.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.midi"/>
+		<require idref="lufa.demos.host.lowlevel.midi"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.midi" caption="MIDI Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.midi" caption="MIDI Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		MIDI Host demo, capable of sending and receiving MIDI messages to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		MIDI Host demo, capable of sending and receiving MIDI messages to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="MIDI Class"/>
+			<keyword value="MIDI Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MIDIHost.txt"/>
+		<build type="distribute" subtype="user-file" value="MIDIHost.txt"/>
-
+
-		<build type="c-source" value="MIDIHost.c"/>
+		<build type="c-source" value="MIDIHost.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="header-file" value="MIDIHost.h"/>
+		<build type="header-file" value="MIDIHost.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-		<require idref="lufa.drivers.board.buttons"/>
+		<require idref="lufa.drivers.board.buttons"/>
-		<require idref="lufa.drivers.board.joystick"/>
+		<require idref="lufa.drivers.board.joystick"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/MassStorageHost/asf.xml

@@ -1,53 +1,53 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mass Storage Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.ms.example.avr8">
+	<project caption="Mass Storage Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.ms.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.ms"/>
+		<require idref="lufa.demos.host.lowlevel.ms"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.ms" caption="Mass Storage Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.ms" caption="Mass Storage Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Mass Storage Host demo, capable of reading and writing raw 512 byte segments to the device's serial port. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Mass Storage Host demo, capable of reading and writing raw 512 byte segments to the device's serial port. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Mass Storage Class"/>
+			<keyword value="Mass Storage Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MassStorageHost.txt"/>
+		<build type="distribute" subtype="user-file" value="MassStorageHost.txt"/>
-
+
-		<build type="c-source" value="MassStorageHost.c"/>
+		<build type="c-source" value="MassStorageHost.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="header-file" value="MassStorageHost.h"/>
+		<build type="header-file" value="MassStorageHost.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-
+
-		<build type="c-source" value="Lib/MassStoreCommands.c"/>
+		<build type="c-source" value="Lib/MassStoreCommands.c"/>
-		<build type="header-file" value="Lib/MassStoreCommands.h"/>
+		<build type="header-file" value="Lib/MassStoreCommands.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/MouseHost/asf.xml

@@ -1,50 +1,50 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mouse HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse.example.avr8">
+	<project caption="Mouse HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.mouse"/>
+		<require idref="lufa.demos.host.lowlevel.mouse"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.mouse" caption="Mouse HID Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.mouse" caption="Mouse HID Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Keyboard HID Host demo, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Keyboard HID Host demo, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MouseHost.txt"/>
+		<build type="distribute" subtype="user-file" value="MouseHost.txt"/>
-
+
-		<build type="c-source" value="MouseHost.c"/>
+		<build type="c-source" value="MouseHost.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="header-file" value="MouseHost.h"/>
+		<build type="header-file" value="MouseHost.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/MouseHostWithParser/asf.xml

@@ -1,52 +1,52 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Mouse HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse_parser.example.avr8">
+	<project caption="Mouse HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse_parser.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.mouse_parser"/>
+		<require idref="lufa.demos.host.lowlevel.mouse_parser"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.mouse_parser" caption="Mouse HID (with parser) Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.mouse_parser" caption="Mouse HID (with parser) Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Mouse HID Host demo with HID parser, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Mouse HID Host demo with HID parser, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="HID Class"/>
+			<keyword value="HID Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="MouseHostWithParser.txt"/>
+		<build type="distribute" subtype="user-file" value="MouseHostWithParser.txt"/>
-
+
-		<build type="c-source" value="MouseHostWithParser.c"/>
+		<build type="c-source" value="MouseHostWithParser.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="c-source" value="HIDReport.c"/>
+		<build type="c-source" value="HIDReport.c"/>
-		<build type="header-file" value="MouseHostWithParser.h"/>
+		<build type="header-file" value="MouseHostWithParser.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-		<build type="header-file" value="HIDReport.h"/>
+		<build type="header-file" value="HIDReport.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/PrinterHost/asf.xml

@@ -1,53 +1,53 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Printer Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.printer.example.avr8">
+	<project caption="Printer Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.printer.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.printer"/>
+		<require idref="lufa.demos.host.lowlevel.printer"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.printer" caption="Printer Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.printer" caption="Printer Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Printer Host demo, implementing a basic USB printer host that can send raw printer control data to an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Printer Host demo, implementing a basic USB printer host that can send raw printer control data to an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Printer Class"/>
+			<keyword value="Printer Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="PrinterHost.txt"/>
+		<build type="distribute" subtype="user-file" value="PrinterHost.txt"/>
-
+
-		<build type="c-source" value="PrinterHost.c"/>
+		<build type="c-source" value="PrinterHost.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="header-file" value="PrinterHost.h"/>
+		<build type="header-file" value="PrinterHost.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-
+
-		<build type="c-source" value="Lib/PrinterCommands.c"/>
+		<build type="c-source" value="Lib/PrinterCommands.c"/>
-		<build type="header-file" value="Lib/PrinterCommands.h"/>
+		<build type="header-file" value="Lib/PrinterCommands.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/RNDISEthernetHost/asf.xml

@@ -1,53 +1,53 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="RNDIS Ethernet Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.rndis.example.avr8">
+	<project caption="RNDIS Ethernet Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.rndis.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.rndis"/>
+		<require idref="lufa.demos.host.lowlevel.rndis"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.rndis" caption="RNDIS Ethernet Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.rndis" caption="RNDIS Ethernet Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Microsoft RNDIS Ethernet Host demo, implementing a RNDIS host that can send and receive Ethernet data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Microsoft RNDIS Ethernet Host demo, implementing a RNDIS host that can send and receive Ethernet data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="RNDIS Class"/>
+			<keyword value="RNDIS Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="RNDISHost.txt"/>
+		<build type="distribute" subtype="user-file" value="RNDISHost.txt"/>
-
+
-		<build type="c-source" value="RNDISEthernetHost.c"/>
+		<build type="c-source" value="RNDISEthernetHost.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="header-file" value="RNDISEthernetHost.h"/>
+		<build type="header-file" value="RNDISEthernetHost.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-
+
-		<build type="c-source" value="Lib/RNDISCommands.c"/>
+		<build type="c-source" value="Lib/RNDISCommands.c"/>
-		<build type="header-file" value="Lib/RNDISCommands.h"/>
+		<build type="header-file" value="Lib/RNDISCommands.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/StillImageHost/asf.xml

@@ -1,54 +1,54 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Still Image Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.si.example.avr8">
+	<project caption="Still Image Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.si.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.si"/>
+		<require idref="lufa.demos.host.lowlevel.si"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.si" caption="Still Image Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.si" caption="Still Image Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Still Image Host demo, implementing a Still Image host that can send and receive PIMA data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Still Image Host demo, implementing a Still Image host that can send and receive PIMA data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Low Level APIs"/>
+			<keyword value="Low Level APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Still Image Class"/>
+			<keyword value="Still Image Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="StillImageHost.txt"/>
+		<build type="distribute" subtype="user-file" value="StillImageHost.txt"/>
-
+
-		<build type="c-source" value="StillImageHost.c"/>
+		<build type="c-source" value="StillImageHost.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="header-file" value="StillImageHost.h"/>
+		<build type="header-file" value="StillImageHost.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-
+
-		<build type="c-source" value="Lib/StillImageCommands.c"/>
+		<build type="c-source" value="Lib/StillImageCommands.c"/>
-		<build type="header-file" value="Lib/StillImageCommands.h"/>
+		<build type="header-file" value="Lib/StillImageCommands.h"/>
-		<build type="header-file" value="Lib/PIMACodes.h"/>
+		<build type="header-file" value="Lib/PIMACodes.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/Demos/Host/LowLevel/VirtualSerialHost/asf.xml

@@ -1,50 +1,50 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="Virtual Serial CDC Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.cdc.example.avr8">
+	<project caption="Virtual Serial CDC Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.cdc.example.avr8">
-		<require idref="lufa.demos.host.lowlevel.cdc"/>
+		<require idref="lufa.demos.host.lowlevel.cdc"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8"/>
+		<generator value="as5_8"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="none"/>
+		<config name="lufa.drivers.board.name" value="none"/>
-
+
-		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_CPU" value="16000000UL"/>
-		<build type="define" name="F_USB" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.demos.host.lowlevel.cdc" caption="Virtual Serial CDC Host Demo (Low Level APIs)">
+	<module type="application" id="lufa.demos.host.lowlevel.cdc" caption="Virtual Serial CDC Host Demo (Low Level APIs)">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Virtual Serial Host demo, implementing a CDC host that can send and receive data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
+		Virtual Serial Host demo, implementing a CDC host that can send and receive data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="Class Driver APIs"/>
+			<keyword value="Class Driver APIs"/>
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="CDC Class"/>
+			<keyword value="CDC Class"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
-		<build type="distribute" subtype="user-file" value="VirtualSerialHost.txt"/>
+		<build type="distribute" subtype="user-file" value="VirtualSerialHost.txt"/>
-
+
-		<build type="c-source" value="VirtualSerialHost.c"/>
+		<build type="c-source" value="VirtualSerialHost.c"/>
-		<build type="c-source" value="ConfigDescriptor.c"/>
+		<build type="c-source" value="ConfigDescriptor.c"/>
-		<build type="header-file" value="VirtualSerialHost.h"/>
+		<build type="header-file" value="VirtualSerialHost.h"/>
-		<build type="header-file" value="ConfigDescriptor.h"/>
+		<build type="header-file" value="ConfigDescriptor.h"/>
-
+
-		<build type="module-config" subtype="path" value="Config"/>
+		<build type="module-config" subtype="path" value="Config"/>
-		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.peripheral.usart"/>
+		<require idref="lufa.drivers.peripheral.usart"/>
-		<require idref="lufa.drivers.misc.ansi"/>
+		<require idref="lufa.drivers.misc.ansi"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-		<require idref="lufa.drivers.board.leds"/>
+		<require idref="lufa.drivers.board.leds"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/LUFA/CodeTemplates/DeviceTemplate/asf.xml

@@ -1,55 +1,55 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="USB Device Template" id="lufa.templates.device.project.avr8">
+	<project caption="USB Device Template" id="lufa.templates.device.project.avr8">
-		<require idref="lufa.templates.device"/>
+		<require idref="lufa.templates.device"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8_template"/>
+		<generator value="as5_8_template"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="usbkey"/>
+		<config name="lufa.drivers.board.name" value="usbkey"/>
-
+
-		<build type="define" name="F_CPU" value="8000000UL"/>
+		<build type="define" name="F_CPU" value="8000000UL"/>
-		<build type="define" name="F_USB" value="8000000UL"/>
+		<build type="define" name="F_USB" value="8000000UL"/>
-	</project>
+	</project>
-
+
-	<project caption="USB Device Template" id="lufa.templates.device.project.xmega">
+	<project caption="USB Device Template" id="lufa.templates.device.project.xmega">
-		<require idref="lufa.templates.device"/>
+		<require idref="lufa.templates.device"/>
-		<require idref="lufa.boards.dummy.xmega"/>
+		<require idref="lufa.boards.dummy.xmega"/>
-		<generator value="as5_8_template"/>
+		<generator value="as5_8_template"/>
-
+
-		<device-support value="atxmega256a3bu"/>
+		<device-support value="atxmega256a3bu"/>
-		<config name="lufa.drivers.board.name" value="a3bu_xplained"/>
+		<config name="lufa.drivers.board.name" value="a3bu_xplained"/>
-
+
-		<build type="define" name="F_CPU" value="32000000UL"/>
+		<build type="define" name="F_CPU" value="32000000UL"/>
-		<build type="define" name="F_USB" value="48000000UL"/>
+		<build type="define" name="F_USB" value="48000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.templates.device" caption="USB Device Template">
+	<module type="application" id="lufa.templates.device" caption="USB Device Template">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Template for a LUFA USB device mode application.
+		Template for a LUFA USB device mode application.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="USB Device"/>
+			<keyword value="USB Device"/>
-			<keyword value="Template Projects"/>
+			<keyword value="Template Projects"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="c-source" value="DeviceApplication.c"/>
+		<build type="c-source" value="DeviceApplication.c"/>
-		<build type="c-source" value="Descriptors.c"/>
+		<build type="c-source" value="Descriptors.c"/>
-		<build type="header-file" value="DeviceApplication.h"/>
+		<build type="header-file" value="DeviceApplication.h"/>
-		<build type="header-file" value="Descriptors.h"/>
+		<build type="header-file" value="Descriptors.h"/>
-
+
-		<build type="module-config" subtype="path" value=".."/>
+		<build type="module-config" subtype="path" value=".."/>
-		<build type="header-file" value="../LUFAConfig.h"/>
+		<build type="header-file" value="../LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/LUFA/CodeTemplates/HostTemplate/asf.xml

@@ -1,41 +1,41 @@
-<asf xmlversion="1.0">
+<asf xmlversion="1.0">
-	<project caption="USB Host Template" id="lufa.templates.host.project">
+	<project caption="USB Host Template" id="lufa.templates.host.project">
-		<require idref="lufa.templates.host"/>
+		<require idref="lufa.templates.host"/>
-		<require idref="lufa.boards.dummy.avr8"/>
+		<require idref="lufa.boards.dummy.avr8"/>
-		<generator value="as5_8_template"/>
+		<generator value="as5_8_template"/>
-
+
-		<device-support value="at90usb1287"/>
+		<device-support value="at90usb1287"/>
-		<config name="lufa.drivers.board.name" value="usbkey"/>
+		<config name="lufa.drivers.board.name" value="usbkey"/>
-
+
-		<build type="define" name="F_CPU" value="8000000UL"/>
+		<build type="define" name="F_CPU" value="8000000UL"/>
-		<build type="define" name="F_USB" value="8000000UL"/>
+		<build type="define" name="F_USB" value="8000000UL"/>
-	</project>
+	</project>
-
+
-	<module type="application" id="lufa.templates.host" caption="USB Host Template">
+	<module type="application" id="lufa.templates.host" caption="USB Host Template">
-		<info type="description" value="summary">
+		<info type="description" value="summary">
-		Template for a LUFA USB host mode application.
+		Template for a LUFA USB host mode application.
-		</info>
+		</info>
-
+
- 		<info type="gui-flag" value="move-to-root"/>
+ 		<info type="gui-flag" value="move-to-root"/>
-
+
-		<info type="keyword" value="Technology">
+		<info type="keyword" value="Technology">
-			<keyword value="USB Host"/>
+			<keyword value="USB Host"/>
-			<keyword value="Template Projects"/>
+			<keyword value="Template Projects"/>
-		</info>
+		</info>
-
+
-		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_avr8"/>
-		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_xmega"/>
-		<device-support-alias value="lufa_uc3"/>
+		<device-support-alias value="lufa_uc3"/>
-
+
-		<build type="c-source" value="HostApplication.c"/>
+		<build type="c-source" value="HostApplication.c"/>
-		<build type="header-file" value="HostApplication.h"/>
+		<build type="header-file" value="HostApplication.h"/>
-
+
-		<build type="module-config" subtype="path" value=".."/>
+		<build type="module-config" subtype="path" value=".."/>
-		<build type="header-file" value="../LUFAConfig.h"/>
+		<build type="header-file" value="../LUFAConfig.h"/>
-
+
-		<require idref="lufa.common"/>
+		<require idref="lufa.common"/>
-		<require idref="lufa.platform"/>
+		<require idref="lufa.platform"/>
-		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.usb"/>
-		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board"/>
-	</module>
+	</module>
-</asf>
+</asf>

lib/lufa/LUFA/DoxygenPages/BuildSystem.txt

@@ -1,281 +1,281 @@
-/** \file
+/** \file
- *
+ *
- *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
+ *  documentation pages. It is not a project source file.
- */
+ */
-
+
-/** \page Page_BuildSystem The LUFA Build System
+/** \page Page_BuildSystem The LUFA Build System
- *
+ *
- *  \section Sec_BuildSystem_Overview Overview of the LUFA Build System
+ *  \section Sec_BuildSystem_Overview Overview of the LUFA Build System
- *  The LUFA build system was originally an attempt at making a set of
+ *  The LUFA build system was originally an attempt at making a set of
- *  re-usable, modular build make files which could be referenced in a LUFA
+ *  re-usable, modular build make files which could be referenced in a LUFA
- *  powered project, to minimize the amount of code required in an
+ *  powered project, to minimize the amount of code required in an
- *  application makefile.
+ *  application makefile.
- *
+ *
- *  As it turned out to be fairly generic in nature, it was split out into its
+ *  As it turned out to be fairly generic in nature, it was split out into its
- *  own separate project, called DMBS (<i>Dean's Makefile Build System</i>)
+ *  own separate project, called DMBS (<i>Dean's Makefile Build System</i>)
- *  which is released into the public domain. LUFA-specific portions of the
+ *  which is released into the public domain. LUFA-specific portions of the
- *  LUFA build system extend DMBS, and provide a universal build system for all
+ *  LUFA build system extend DMBS, and provide a universal build system for all
- *  LUFA projects.
+ *  LUFA projects.
- *
+ *
- *  The latest DMBS project information and documentation can be found at:
+ *  The latest DMBS project information and documentation can be found at:
- *  https://github.com/abcminiuser/dmbs
+ *  https://github.com/abcminiuser/dmbs
- *
+ *
- *  DMBS is written in GNU Make, and each module is independent of one-another.
+ *  DMBS is written in GNU Make, and each module is independent of one-another.
- *
+ *
- *  LUFA now uses DMBS for its build system, with some LUFA specific extension
+ *  LUFA now uses DMBS for its build system, with some LUFA specific extension
- *  modules.
+ *  modules.
- *
+ *
- *  If you have problems building using LUFA, see \subpage Page_BuildTroubleshooting for resolution steps.
+ *  If you have problems building using LUFA, see \subpage Page_BuildTroubleshooting for resolution steps.
- *
+ *
- *  \li \subpage Page_BuildModule_LUFA_SOURCES - The LUFA SOURCES extension module for DMBS
+ *  \li \subpage Page_BuildModule_LUFA_SOURCES - The LUFA SOURCES extension module for DMBS
- *  \li \subpage Page_BuildModule_LUFA_GCC - The LUFA GCC extension module for DMBS
+ *  \li \subpage Page_BuildModule_LUFA_GCC - The LUFA GCC extension module for DMBS
- */
+ */
-
+
-/** \page Page_BuildModule_LUFA_SOURCES LUFA SOURCES extension module for DMBS
+/** \page Page_BuildModule_LUFA_SOURCES LUFA SOURCES extension module for DMBS
- *
+ *
- *  The LUFA SOURCES extension more for DMBS provides LUFA specific variables
+ *  The LUFA SOURCES extension more for DMBS provides LUFA specific variables
- *  listing the various LUFA source files required to be build by a project for
+ *  listing the various LUFA source files required to be build by a project for
- *  a given LUFA module. This module gives a way to reference LUFA source files
+ *  a given LUFA module. This module gives a way to reference LUFA source files
- *  symbolically, so that changes to the library structure do not break the
+ *  symbolically, so that changes to the library structure do not break the
- *  library makefile.
+ *  library makefile.
- *
+ *
- *  To use this module in your application makefile, add the following code:
+ *  To use this module in your application makefile, add the following code:
- *  \code
+ *  \code
- *  include $(LUFA_PATH)/Build/LUFA/lufa-sources.mk
+ *  include $(LUFA_PATH)/Build/LUFA/lufa-sources.mk
- *  \endcode
+ *  \endcode
- *
+ *
- *  \section SSec_BuildModule_LUFA_SOURCES_Requirements Requirements
+ *  \section SSec_BuildModule_LUFA_SOURCES_Requirements Requirements
- *  None.
+ *  None.
- *
+ *
- *  \section SSec_BuildModule_LUFA_SOURCES_Targets Targets
+ *  \section SSec_BuildModule_LUFA_SOURCES_Targets Targets
- *
+ *
- *  <table>
+ *  <table>
- *   <tr>
+ *   <tr>
- *    <td><i>None</i></td>
+ *    <td><i>None</i></td>
- *   </tr>
+ *   </tr>
- *  </table>
+ *  </table>
- *
+ *
- *  \section SSec_BuildModule_LUFA_SOURCES_MandatoryParams Mandatory Parameters
+ *  \section SSec_BuildModule_LUFA_SOURCES_MandatoryParams Mandatory Parameters
- *
+ *
- *  <table>
+ *  <table>
- *   <tr>
+ *   <tr>
- *    <td><tt>LUFA_PATH</tt></td>
+ *    <td><tt>LUFA_PATH</tt></td>
- *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td><tt>ARCH</tt></td>
+ *    <td><tt>ARCH</tt></td>
- *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
+ *    <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
- *   </tr>
+ *   </tr>
- *  </table>
+ *  </table>
- *
+ *
- *  \section SSec_BuildModule_LUFA_SOURCES_OptionalParams Optional Parameters
+ *  \section SSec_BuildModule_LUFA_SOURCES_OptionalParams Optional Parameters
- *
+ *
- *  <table>
+ *  <table>
- *   <tr>
+ *   <tr>
- *    <td><i>None</i></td>
+ *    <td><i>None</i></td>
- *   </tr>
+ *   </tr>
- *  </table>
+ *  </table>
- *
+ *
- *  \section SSec_BuildModule_LUFA_SOURCES_ProvidedVariables Module Provided Variables
+ *  \section SSec_BuildModule_LUFA_SOURCES_ProvidedVariables Module Provided Variables
- *
+ *
- *  <table>
+ *  <table>
- *   <tr>
+ *   <tr>
- *    <td><tt>LUFA_SRC_USB</tt></td>
+ *    <td><tt>LUFA_SRC_USB</tt></td>
- *    <td>List of LUFA USB driver source files.</td>
+ *    <td>List of LUFA USB driver source files.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td><tt>LUFA_SRC_USBCLASS</tt></td>
+ *    <td><tt>LUFA_SRC_USBCLASS</tt></td>
- *    <td>List of LUFA USB Class driver source files.</td>
+ *    <td>List of LUFA USB Class driver source files.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td><tt>LUFA_SRC_TEMPERATURE</tt></td>
+ *    <td><tt>LUFA_SRC_TEMPERATURE</tt></td>
- *    <td>List of LUFA temperature sensor driver source files.</td>
+ *    <td>List of LUFA temperature sensor driver source files.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td><tt>LUFA_SRC_SERIAL</tt></td>
+ *    <td><tt>LUFA_SRC_SERIAL</tt></td>
- *    <td>List of LUFA Serial U(S)ART driver source files.</td>
+ *    <td>List of LUFA Serial U(S)ART driver source files.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td><tt>LUFA_SRC_TWI</tt></td>
+ *    <td><tt>LUFA_SRC_TWI</tt></td>
- *    <td>List of LUFA TWI driver source files.</td>
+ *    <td>List of LUFA TWI driver source files.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td><tt>LUFA_SRC_PLATFORM</tt></td>
+ *    <td><tt>LUFA_SRC_PLATFORM</tt></td>
- *    <td>List of LUFA architecture specific platform management source files.</td>
+ *    <td>List of LUFA architecture specific platform management source files.</td>
- *   </tr>
+ *   </tr>
- *  </table>
+ *  </table>
- *
+ *
- *  \section SSec_BuildModule_LUFA_SOURCES_ProvidedMacros Module Provided Macros
+ *  \section SSec_BuildModule_LUFA_SOURCES_ProvidedMacros Module Provided Macros
- *
+ *
- *  <table>
+ *  <table>
- *   <tr>
+ *   <tr>
- *    <td><i>None</i></td>
+ *    <td><i>None</i></td>
- *   </tr>
+ *   </tr>
- *  </table>
+ *  </table>
- */
+ */
-
+
-/** \page Page_BuildModule_LUFA_GCC LUFA GCC extension module for DMBS
+/** \page Page_BuildModule_LUFA_GCC LUFA GCC extension module for DMBS
- *
+ *
- *  The LUFA GCC extension module for the standard DMBS GCC module extends the
+ *  The LUFA GCC extension module for the standard DMBS GCC module extends the
- *  latter to support the compilation of LUFA powered projects. It should be
+ *  latter to support the compilation of LUFA powered projects. It should be
- *  imported into your LUFA powered project makefiles to ensure that the correct
+ *  imported into your LUFA powered project makefiles to ensure that the correct
- *  build settings are used for the project's configuration.
+ *  build settings are used for the project's configuration.
- *
+ *
- *  To use this module in your application makefile, add the following code:
+ *  To use this module in your application makefile, add the following code:
- *  \code
+ *  \code
- *  include $(LUFA_PATH)/Build/LUFA/lufa-gcc.mk
+ *  include $(LUFA_PATH)/Build/LUFA/lufa-gcc.mk
- *  \endcode
+ *  \endcode
- *
+ *
- *  \section SSec_BuildModule_LUFA_GCC_Requirements Requirements
+ *  \section SSec_BuildModule_LUFA_GCC_Requirements Requirements
- *  This module should be included in your makefile *after* the DMBS GCC module.
+ *  This module should be included in your makefile *after* the DMBS GCC module.
- *
+ *
- *  \section SSec_BuildModule_LUFA_GCC_Targets Targets
+ *  \section SSec_BuildModule_LUFA_GCC_Targets Targets
- *
+ *
- *  <table>
+ *  <table>
- *   <tr>
+ *   <tr>
- *    <td><i>None</i></td>
+ *    <td><i>None</i></td>
- *   </tr>
+ *   </tr>
- *  </table>
+ *  </table>
- *
+ *
- *  \section SSec_BuildModule_LUFA_GCC_MandatoryParams Mandatory Parameters
+ *  \section SSec_BuildModule_LUFA_GCC_MandatoryParams Mandatory Parameters
- *
+ *
- *  <table>
+ *  <table>
- *   <tr>
+ *   <tr>
- *    <td><tt>LUFA_PATH</tt></td>
+ *    <td><tt>LUFA_PATH</tt></td>
- *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
+ *    <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
- *   </tr>
+ *   </tr>
- *  </table>
+ *  </table>
- *
+ *
- *  \section SSec_BuildModule_LUFA_GCC_OptionalParams Optional Parameters
+ *  \section SSec_BuildModule_LUFA_GCC_OptionalParams Optional Parameters
- *
+ *
- *  <table>
+ *  <table>
- *   <tr>
+ *   <tr>
- *    <td><tt>BOARD</tt></td>
+ *    <td><tt>BOARD</tt></td>
- *    <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>
+ *    <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>
- *   </tr>
+ *   </tr>
- *  </table>
+ *  </table>
- *
+ *
- *  \section SSec_BuildModule_LUFA_GCC_ProvidedVariables Module Provided Variables
+ *  \section SSec_BuildModule_LUFA_GCC_ProvidedVariables Module Provided Variables
- *
+ *
- *  <table>
+ *  <table>
- *   <tr>
+ *   <tr>
- *    <td><i>None</i></td>
+ *    <td><i>None</i></td>
- *   </tr>
+ *   </tr>
- *  </table>
+ *  </table>
- *
+ *
- *  \section SSec_BuildModule_LUFA_GCC_ProvidedMacros Module Provided Macros
+ *  \section SSec_BuildModule_LUFA_GCC_ProvidedMacros Module Provided Macros
- *
+ *
- *  <table>
+ *  <table>
- *   <tr>
+ *   <tr>
- *    <td><i>None</i></td>
+ *    <td><i>None</i></td>
- *   </tr>
+ *   </tr>
- *  </table>
+ *  </table>
- */
+ */
-
+
-/** \page Page_BuildTroubleshooting Troubleshooting Information
+/** \page Page_BuildTroubleshooting Troubleshooting Information
- *
+ *
- *  LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and
+ *  LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and
- *  surrounding binaries. This can sometimes lead to problems compiling
+ *  surrounding binaries. This can sometimes lead to problems compiling
- *  applications if one of these features is buggy in the version of the tools
+ *  applications if one of these features is buggy in the version of the tools
- *  used in a build environment. Missing utilities and incorrectly set makefile
+ *  used in a build environment. Missing utilities and incorrectly set makefile
- *  configuration options can also result in different errors being produced
+ *  configuration options can also result in different errors being produced
- *  when compilation or other operations are attempted. The table below lists a
+ *  when compilation or other operations are attempted. The table below lists a
- *  set of commonly encountered errors and their resolutions.
+ *  set of commonly encountered errors and their resolutions.
- *
+ *
- *  <table>
+ *  <table>
- *    <tr>
+ *    <tr>
- *    <th>Problem</th>
+ *    <th>Problem</th>
- *    <th>Resolution</th>
+ *    <th>Resolution</th>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>&quot; shown when compiling.</td>
- *    <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>
+ *    <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt>
- *        from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>
+ *        from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>&quot; shown when compiling.</td>
- *    <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>
+ *    <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>&quot; shown when compiling.</td>
- *    <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with
+ *    <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with
- *        GNU make or other variants of Make causing an infinitely recursive build.</td>
+ *        GNU make or other variants of Make causing an infinitely recursive build.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>Unsupported architecture &quot;<i>{X}</i>&quot;</tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>Unsupported architecture &quot;<i>{X}</i>&quot;</tt></b>&quot; shown when compiling.</td>
- *    <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>
+ *    <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> value not set</tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> value not set</tt></b>&quot; shown when compiling.</td>
- *    <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA
+ *    <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA
- *        build system modules. Define the value in your project makefile and try again.</td>
+ *        build system modules. Define the value in your project makefile and try again.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>&quot; shown when compiling.</td>
- *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration
+ *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration
- *        option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>
+ *        option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>&quot; shown when compiling.</td>
- *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").
+ *    <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No").
- *        This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>
+ *        This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
- *    <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not
+ *    <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not
- *        recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>
+ *        recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>&quot; shown when compiling.</td>
- *    <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.
+ *    <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path.
- *        This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>
+ *        This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>Source file does not exist: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>Source file does not exist: <i>{X}</i></tt></b>&quot; shown when compiling.</td>
- *    <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or
+ *    <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or
- *        relative path given in the user project makefile is correct and try again.</td>
+ *        relative path given in the user project makefile is correct and try again.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>&quot; shown when upgrading a Doxygen configuration file.</td>
+ *    <td>Error &quot;<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>&quot; shown when upgrading a Doxygen configuration file.</td>
- *    <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists
+ *    <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists
- *        and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration
+ *        and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration
- *        file.</td>
+ *        file.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
- *    <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration
+ *    <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration
- *        options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or
+ *        options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or
- *        upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>
+ *        upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>&quot; shown when make is invoked.</td>
+ *    <td>Error &quot;<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>&quot; shown when make is invoked.</td>
- *    <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or
+ *    <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or
- *        absolute path to the LUFA library core.</td>
+ *        absolute path to the LUFA library core.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>&quot; shown when compiling.</td>
- *    <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be
+ *    <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be
- *        found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>
+ *        found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt>
- *        parameter.</td>
+ *        parameter.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>&quot; shown when compiling a bootloader.</td>
+ *    <td>Error &quot;<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>&quot; shown when compiling a bootloader.</td>
- *    <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This
+ *    <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This
- *        usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the
+ *        usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the
- *        compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>
+ *        compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>&quot; shown when compiling.</td>
- *    <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the
+ *    <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the
- *        version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>
+ *        version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td>
- *   </tr>
+ *   </tr>
- *   <tr>
+ *   <tr>
- *    <td>Error &quot;<b><tt>undefined reference to `<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
+ *    <td>Error &quot;<b><tt>undefined reference to `<i>{X}</i>'</tt></b>&quot; shown when compiling.</td>
- *    <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA
+ *    <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA
- *        library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_LUFA_SOURCES).</td>
+ *        library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_LUFA_SOURCES).</td>
- *   </tr>
+ *   </tr>
- *  </table>
+ *  </table>
- *
+ *
- *  For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.
+ *  For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp.
- */
+ */

quantum/visualizer/common_gfxconf.h

@@ -0,0 +1,325 @@
+/**
+ * This file has a different license to the rest of the uGFX system.
+ * You can copy, modify and distribute this file as you see fit.
+ * You do not need to publish your source modifications to this file.
+ * The only thing you are not permitted to do is to relicense it
+ * under a different license.
+ */
+
+/**
+ * Copy this file into your project directory and rename it as gfxconf.h
+ * Edit your copy to turn on the uGFX features you want to use.
+ * The values below are the defaults.
+ *
+ * Only remove the comments from lines where you want to change the
+ * default value. This allows definitions to be included from
+ * driver makefiles when required and provides the best future
+ * compatibility for your project.
+ *
+ * Please use spaces instead of tabs in this file.
+ */
+
+#ifndef COMMON_GFXCONF_H
+#define COMMON_GFXCONF_H
+
+
+///////////////////////////////////////////////////////////////////////////
+// GOS - One of these must be defined, preferably in your Makefile       //
+///////////////////////////////////////////////////////////////////////////
+//#define GFX_USE_OS_CHIBIOS                           TRUE
+//#define GFX_USE_OS_FREERTOS                          FALSE
+//    #define GFX_FREERTOS_USE_TRACE                   FALSE
+//#define GFX_USE_OS_WIN32                             FALSE
+//#define GFX_USE_OS_LINUX                             FALSE
+//#define GFX_USE_OS_OSX                               FALSE
+//#define GFX_USE_OS_ECOS                              FALSE
+//#define GFX_USE_OS_RAWRTOS                           FALSE
+//#define GFX_USE_OS_ARDUINO                           FALSE
+//#define GFX_USE_OS_KEIL                              FALSE
+//#define GFX_USE_OS_CMSIS                             FALSE
+//#define GFX_USE_OS_RAW32                             FALSE
+//    #define INTERRUPTS_OFF()                         optional_code
+//    #define INTERRUPTS_ON()                          optional_code
+// These are not defined by default for some reason
+#define GOS_NEED_X_THREADS	FALSE
+#define GOS_NEED_X_HEAP		FALSE
+
+// Options that (should where relevant) apply to all operating systems
+    #define GFX_NO_INLINE                            FALSE
+//    #define GFX_COMPILER                             GFX_COMPILER_UNKNOWN
+//    #define GFX_CPU                                  GFX_CPU_UNKNOWN
+//    #define GFX_OS_HEAP_SIZE                         0
+//    #define GFX_OS_NO_INIT                           FALSE
+//    #define GFX_OS_INIT_NO_WARNING                   FALSE
+//    #define GFX_OS_PRE_INIT_FUNCTION                 myHardwareInitRoutine
+//    #define GFX_OS_EXTRA_INIT_FUNCTION               myOSInitRoutine
+//    #define GFX_OS_EXTRA_DEINIT_FUNCTION             myOSDeInitRoutine
+
+
+///////////////////////////////////////////////////////////////////////////
+// GDISP                                                                 //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GDISP                                TRUE
+
+//#define GDISP_NEED_AUTOFLUSH                         FALSE
+//#define GDISP_NEED_TIMERFLUSH                        FALSE
+//#define GDISP_NEED_VALIDATION                        TRUE
+//#define GDISP_NEED_CLIP                              TRUE
+#define GDISP_NEED_CIRCLE                            TRUE
+#define GDISP_NEED_ELLIPSE                           TRUE
+#define GDISP_NEED_ARC                               TRUE
+#define GDISP_NEED_ARCSECTORS                        TRUE
+#define GDISP_NEED_CONVEX_POLYGON                    TRUE
+//#define GDISP_NEED_SCROLL                            FALSE
+#define GDISP_NEED_PIXELREAD                         TRUE
+#define GDISP_NEED_CONTROL                           TRUE
+//#define GDISP_NEED_QUERY                             FALSE
+//#define GDISP_NEED_MULTITHREAD                       FALSE
+//#define GDISP_NEED_STREAMING                         FALSE
+#define GDISP_NEED_TEXT                              TRUE
+//    #define GDISP_NEED_TEXT_WORDWRAP                 FALSE
+//    #define GDISP_NEED_ANTIALIAS                     FALSE
+//    #define GDISP_NEED_UTF8                          FALSE
+    #define GDISP_NEED_TEXT_KERNING                  TRUE
+//    #define GDISP_INCLUDE_FONT_UI1                   FALSE
+//    #define GDISP_INCLUDE_FONT_UI2                   FALSE		// The smallest preferred font.
+//    #define GDISP_INCLUDE_FONT_LARGENUMBERS          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS10          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24          FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32          FALSE
+    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12      TRUE
+//    #define GDISP_INCLUDE_FONT_FIXED_10X20           FALSE
+//    #define GDISP_INCLUDE_FONT_FIXED_7X14            FALSE
+    #define GDISP_INCLUDE_FONT_FIXED_5X8             TRUE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA       FALSE
+//    #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA   FALSE
+//    #define GDISP_INCLUDE_USER_FONTS                 FALSE
+
+//#define GDISP_NEED_IMAGE                             FALSE
+//    #define GDISP_NEED_IMAGE_NATIVE                  FALSE
+//    #define GDISP_NEED_IMAGE_GIF                     FALSE
+//    #define GDISP_NEED_IMAGE_BMP                     FALSE
+//        #define GDISP_NEED_IMAGE_BMP_1               FALSE
+//        #define GDISP_NEED_IMAGE_BMP_4               FALSE
+//        #define GDISP_NEED_IMAGE_BMP_4_RLE           FALSE
+//        #define GDISP_NEED_IMAGE_BMP_8               FALSE
+//        #define GDISP_NEED_IMAGE_BMP_8_RLE           FALSE
+//        #define GDISP_NEED_IMAGE_BMP_16              FALSE
+//        #define GDISP_NEED_IMAGE_BMP_24              FALSE
+//        #define GDISP_NEED_IMAGE_BMP_32              FALSE
+//    #define GDISP_NEED_IMAGE_JPG                     FALSE
+//    #define GDISP_NEED_IMAGE_PNG                     FALSE
+//    #define GDISP_NEED_IMAGE_ACCOUNTING              FALSE
+#ifdef EMULATOR
+#define GDISP_NEED_PIXMAP                            TRUE
+#endif
+//    #define GDISP_NEED_PIXMAP_IMAGE                  FALSE
+
+//#define GDISP_DEFAULT_ORIENTATION                    GDISP_ROTATE_LANDSCAPE    // If not defined the native hardware orientation is used.
+//#define GDISP_LINEBUF_SIZE                           128
+//#define GDISP_STARTUP_COLOR                          Black
+#define GDISP_NEED_STARTUP_LOGO                      FALSE
+
+//#define GDISP_TOTAL_DISPLAYS		                 2
+
+    #ifdef GDISP_DRIVER_LIST
+        // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
+        #define GDISP_HARDWARE_STREAM_WRITE          FALSE
+        #define GDISP_HARDWARE_STREAM_READ           FALSE
+        #define GDISP_HARDWARE_STREAM_POS            FALSE
+        #define GDISP_HARDWARE_DRAWPIXEL             TRUE
+        #define GDISP_HARDWARE_CLEARS                FALSE
+        #define GDISP_HARDWARE_FILLS                 FALSE
+        //#define GDISP_HARDWARE_BITFILLS              FALSE
+        #define GDISP_HARDWARE_SCROLL                FALSE
+        #define GDISP_HARDWARE_PIXELREAD             TRUE
+        #define GDISP_HARDWARE_CONTROL               TRUE
+        #define GDISP_HARDWARE_QUERY                 FALSE
+        #define GDISP_HARDWARE_CLIP                  FALSE
+
+        #define GDISP_PIXELFORMAT                    GDISP_PIXELFORMAT_RGB888
+    #endif
+
+// The custom format is not defined for some reason, so define it as error
+// so we don't get compiler warnings
+#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR
+
+#define GDISP_USE_GFXNET                             FALSE
+//    #define GDISP_GFXNET_PORT                        13001
+//    #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP         FALSE
+//    #define GDISP_DONT_WAIT_FOR_NET_DISPLAY          FALSE
+//    #define GDISP_GFXNET_UNSAFE_SOCKETS              FALSE
+
+
+///////////////////////////////////////////////////////////////////////////
+// GWIN                                                                  //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GWIN                                 FALSE
+
+//#define GWIN_NEED_WINDOWMANAGER                      FALSE
+//    #define GWIN_REDRAW_IMMEDIATE                    FALSE
+//    #define GWIN_REDRAW_SINGLEOP                     FALSE
+//    #define GWIN_NEED_FLASHING                       FALSE
+//        #define GWIN_FLASHING_PERIOD                 250
+
+//#define GWIN_NEED_CONSOLE                            FALSE
+//    #define GWIN_CONSOLE_USE_HISTORY                 FALSE
+//        #define GWIN_CONSOLE_HISTORY_AVERAGING       FALSE
+//        #define GWIN_CONSOLE_HISTORY_ATCREATE        FALSE
+//    #define GWIN_CONSOLE_ESCSEQ                      FALSE
+//    #define GWIN_CONSOLE_USE_BASESTREAM              FALSE
+//    #define GWIN_CONSOLE_USE_FLOAT                   FALSE
+//#define GWIN_NEED_GRAPH                              FALSE
+//#define GWIN_NEED_GL3D                               FALSE
+
+//#define GWIN_NEED_WIDGET                             FALSE
+//#define GWIN_FOCUS_HIGHLIGHT_WIDTH                   1
+//    #define GWIN_NEED_LABEL                          FALSE
+//        #define GWIN_LABEL_ATTRIBUTE                 FALSE
+//    #define GWIN_NEED_BUTTON                         FALSE
+//        #define GWIN_BUTTON_LAZY_RELEASE             FALSE
+//    #define GWIN_NEED_SLIDER                         FALSE
+//        #define GWIN_SLIDER_NOSNAP                   FALSE
+//        #define GWIN_SLIDER_DEAD_BAND                5
+//        #define GWIN_SLIDER_TOGGLE_INC               20
+//    #define GWIN_NEED_CHECKBOX                       FALSE
+//    #define GWIN_NEED_IMAGE                          FALSE
+//        #define GWIN_NEED_IMAGE_ANIMATION            FALSE
+//    #define GWIN_NEED_RADIO                          FALSE
+//    #define GWIN_NEED_LIST                           FALSE
+//        #define GWIN_NEED_LIST_IMAGES                FALSE
+//    #define GWIN_NEED_PROGRESSBAR                    FALSE
+//        #define GWIN_PROGRESSBAR_AUTO                FALSE
+//    #define GWIN_NEED_KEYBOARD                       FALSE
+//        #define GWIN_KEYBOARD_DEFAULT_LAYOUT         VirtualKeyboard_English1
+//        #define GWIN_NEED_KEYBOARD_ENGLISH1          TRUE
+//    #define GWIN_NEED_TEXTEDIT                       FALSE
+//    #define GWIN_FLAT_STYLING                        FALSE
+//    #define GWIN_WIDGET_TAGS                         FALSE
+
+//#define GWIN_NEED_CONTAINERS                         FALSE
+//    #define GWIN_NEED_CONTAINER                      FALSE
+//    #define GWIN_NEED_FRAME                          FALSE
+//    #define GWIN_NEED_TABSET                         FALSE
+//        #define GWIN_TABSET_TABHEIGHT                18
+
+
+///////////////////////////////////////////////////////////////////////////
+// GEVENT                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GEVENT                               TRUE
+
+//#define GEVENT_ASSERT_NO_RESOURCE                    FALSE
+//#define GEVENT_MAXIMUM_SIZE                          32
+//#define GEVENT_MAX_SOURCE_LISTENERS                  32
+
+
+///////////////////////////////////////////////////////////////////////////
+// GTIMER                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GTIMER                               FALSE
+
+//#define GTIMER_THREAD_PRIORITY                       HIGH_PRIORITY
+//#define GTIMER_THREAD_WORKAREA_SIZE                  2048
+
+
+///////////////////////////////////////////////////////////////////////////
+// GQUEUE                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GQUEUE                               FALSE
+
+//#define GQUEUE_NEED_ASYNC                            FALSE
+//#define GQUEUE_NEED_GSYNC                            FALSE
+//#define GQUEUE_NEED_FSYNC                            FALSE
+//#define GQUEUE_NEED_BUFFERS                          FALSE
+
+///////////////////////////////////////////////////////////////////////////
+// GINPUT                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GINPUT                               FALSE
+
+//#define GINPUT_NEED_MOUSE                            FALSE
+//    #define GINPUT_TOUCH_STARTRAW                    FALSE
+//    #define GINPUT_TOUCH_NOTOUCH                     FALSE
+//    #define GINPUT_TOUCH_NOCALIBRATE                 FALSE
+//    #define GINPUT_TOUCH_NOCALIBRATE_GUI             FALSE
+//    #define GINPUT_MOUSE_POLL_PERIOD                 25
+//    #define GINPUT_MOUSE_CLICK_TIME                  300
+//    #define GINPUT_TOUCH_CXTCLICK_TIME               700
+//    #define GINPUT_TOUCH_USER_CALIBRATION_LOAD       FALSE
+//    #define GINPUT_TOUCH_USER_CALIBRATION_SAVE       FALSE
+//    #define GMOUSE_DRIVER_LIST                       GMOUSEVMT_Win32, GMOUSEVMT_Win32
+//#define GINPUT_NEED_KEYBOARD                         FALSE
+//    #define GINPUT_KEYBOARD_POLL_PERIOD              200
+//    #define GKEYBOARD_DRIVER_LIST                    GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
+//    #define GKEYBOARD_LAYOUT_OFF                     FALSE
+//        #define GKEYBOARD_LAYOUT_SCANCODE2_US        FALSE
+//#define GINPUT_NEED_TOGGLE                           FALSE
+//#define GINPUT_NEED_DIAL                             FALSE
+
+
+///////////////////////////////////////////////////////////////////////////
+// GFILE                                                                 //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GFILE                                FALSE
+
+//#define GFILE_NEED_PRINTG                            FALSE
+//#define GFILE_NEED_SCANG                             FALSE
+//#define GFILE_NEED_STRINGS                           FALSE
+//#define GFILE_NEED_FILELISTS                         FALSE
+//#define GFILE_NEED_STDIO                             FALSE
+//#define GFILE_NEED_NOAUTOMOUNT                       FALSE
+//#define GFILE_NEED_NOAUTOSYNC                        FALSE
+
+//#define GFILE_NEED_MEMFS                             FALSE
+//#define GFILE_NEED_ROMFS                             FALSE
+//#define GFILE_NEED_RAMFS                             FALSE
+//#define GFILE_NEED_FATFS                             FALSE
+//#define GFILE_NEED_NATIVEFS                          FALSE
+//#define GFILE_NEED_CHBIOSFS                          FALSE
+
+//#define GFILE_ALLOW_FLOATS                           FALSE
+//#define GFILE_ALLOW_DEVICESPECIFIC                   FALSE
+//#define GFILE_MAX_GFILES                             3
+
+///////////////////////////////////////////////////////////////////////////
+// GADC                                                                  //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GADC                                 FALSE
+
+//#define GADC_MAX_LOWSPEED_DEVICES                    4
+
+
+///////////////////////////////////////////////////////////////////////////
+// GAUDIO                                                                //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GAUDIO                               FALSE
+// There seems to be a bug in the ugfx code, the wrong define is used
+// So define it in order to avoid warnings
+#define GFX_USE_GAUDIN                               GFX_USE_GAUDIO
+//    #define GAUDIO_NEED_PLAY                         FALSE
+//    #define GAUDIO_NEED_RECORD                       FALSE
+
+
+///////////////////////////////////////////////////////////////////////////
+// GMISC                                                                 //
+///////////////////////////////////////////////////////////////////////////
+#define GFX_USE_GMISC                                TRUE
+
+//#define GMISC_NEED_ARRAYOPS                          FALSE
+//#define GMISC_NEED_FASTTRIG                          FALSE
+//#define GMISC_NEED_FIXEDTRIG                         FALSE
+//#define GMISC_NEED_INVSQRT                           FALSE
+//    #define GMISC_INVSQRT_MIXED_ENDIAN               FALSE
+//    #define GMISC_INVSQRT_REAL_SLOW                  FALSE
+#define GMISC_NEED_MATRIXFLOAT2D                     TRUE
+#define GMISC_NEED_MATRIXFIXED2D                     FALSE
+
+#endif /* COMMON_GFXCONF_H */

quantum/visualizer/default_animations.c

@@ -16,7 +16,7 @@
 
 #if defined(VISUALIZER_ENABLE)
 
-#include "animations.h"
+#include "default_animations.h"
 #include "visualizer.h"
 #ifdef LCD_ENABLE
 #include "lcd_keyframes.h"
@@ -26,7 +26,7 @@
 #endif
 
 #ifdef BACKLIGHT_ENABLE
-#include "led_keyframes.h"
+#include "led_backlight_keyframes.h"
 #endif
 
 #include "visualizer_keyframes.h"
@@ -39,10 +39,10 @@ static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t*
     lcd_keyframe_enable(animation, state);
 #endif
 #ifdef LCD_BACKLIGHT_ENABLE
-    backlight_keyframe_enable(animation, state);
+    lcd_backlight_keyframe_enable(animation, state);
 #endif
 #ifdef BACKLIGHT_ENABLE
-    led_keyframe_enable(animation, state);
+    led_backlight_keyframe_enable(animation, state);
 #endif
     return false;
 }
@@ -52,10 +52,10 @@ static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t
     lcd_keyframe_disable(animation, state);
 #endif
 #ifdef LCD_BACKLIGHT_ENABLE
-    backlight_keyframe_disable(animation, state);
+    lcd_backlight_keyframe_disable(animation, state);
 #endif
 #ifdef BACKLIGHT_ENABLE
-    led_keyframe_disable(animation, state);
+    led_backlight_keyframe_disable(animation, state);
 #endif
     return false;
 }
@@ -63,10 +63,10 @@ static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t
 static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) {
     bool ret = false;
 #ifdef LCD_BACKLIGHT_ENABLE
-    ret |= backlight_keyframe_animate_color(animation, state);
+    ret |= lcd_backlight_keyframe_animate_color(animation, state);
 #endif
 #ifdef BACKLIGHT_ENABLE
-    ret |= led_keyframe_fade_in_all(animation, state);
+    ret |= led_backlight_keyframe_fade_in_all(animation, state);
 #endif
     return ret;
 }
@@ -74,10 +74,10 @@ static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t
 static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) {
     bool ret = false;
 #ifdef LCD_BACKLIGHT_ENABLE
-    ret |= backlight_keyframe_animate_color(animation, state);
+    ret |= lcd_backlight_keyframe_animate_color(animation, state);
 #endif
 #ifdef BACKLIGHT_ENABLE
-    ret |= led_keyframe_fade_out_all(animation, state);
+    ret |= led_backlight_keyframe_fade_out_all(animation, state);
 #endif
     return ret;
 }
@@ -86,22 +86,44 @@ static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_
 // Don't worry, if the startup animation is long, you can use the keyboard like normal
 // during that time
 keyframe_animation_t default_startup_animation = {
+#if LCD_ENABLE
     .num_frames = 3,
+#else
+    .num_frames = 2,
+#endif
     .loop = false,
-    .frame_lengths = {0, 0, gfxMillisecondsToTicks(5000)},
+    .frame_lengths = {
+        0, 
+#if LCD_ENABLE
+        0, 
+#endif
+        gfxMillisecondsToTicks(5000)},
     .frame_functions = {
             keyframe_enable,
+#if LCD_ENABLE
             lcd_keyframe_draw_logo,
+#endif
             keyframe_fade_in,
     },
 };
 
 keyframe_animation_t default_suspend_animation = {
+#if LCD_ENABLE
     .num_frames = 3,
+#else
+    .num_frames = 2,
+#endif
     .loop = false,
-    .frame_lengths = {0, gfxMillisecondsToTicks(1000), 0},
+    .frame_lengths = {
+#if LCD_ENABLE
+        0, 
+#endif
+        gfxMillisecondsToTicks(1000), 
+        0},
     .frame_functions = {
+#if LCD_ENABLE
             lcd_keyframe_display_layer_text,
+#endif
             keyframe_fade_out,
             keyframe_disable,
     },
@@ -133,20 +155,20 @@ keyframe_animation_t led_test_animation = {
 
     },
     .frame_functions = {
-        led_keyframe_fade_in_all,
+        led_backlight_keyframe_fade_in_all,
         keyframe_no_operation,
-        led_keyframe_fade_out_all,
+        led_backlight_keyframe_fade_out_all,
-        led_keyframe_crossfade,
+        led_backlight_keyframe_crossfade,
-        led_keyframe_left_to_right_gradient,
+        led_backlight_keyframe_left_to_right_gradient,
-        led_keyframe_crossfade,
+        led_backlight_keyframe_crossfade,
-        led_keyframe_top_to_bottom_gradient,
+        led_backlight_keyframe_top_to_bottom_gradient,
-        led_keyframe_mirror_orientation,
+        led_backlight_keyframe_mirror_orientation,
-        led_keyframe_crossfade,
+        led_backlight_keyframe_crossfade,
-        led_keyframe_left_to_right_gradient,
+        led_backlight_keyframe_left_to_right_gradient,
-        led_keyframe_crossfade,
+        led_backlight_keyframe_crossfade,
-        led_keyframe_top_to_bottom_gradient,
+        led_backlight_keyframe_top_to_bottom_gradient,
-        led_keyframe_normal_orientation,
+        led_backlight_keyframe_normal_orientation,
-        led_keyframe_crossfade,
+        led_backlight_keyframe_crossfade,
     },
 };
 #endif