F5 pin doesn't support PWM, so breathing isn't an option

* Add "secret" macor

* Updating secret macros

* Re-add RGB to Ergodox

* Fixed issue when RGB was disabled

* Consistency changes

* Updated bootloader macro

* Fixing audio setup

* Fix bootloader typo

* Update to full list of stings (for completeness)

* Template fix

* Finally got woodpad to force numlock

* Fix for new RGB mode

bootloader.mk

@@ -0,0 +1,62 @@
+# Copyright 2017 Jack Humbert
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# If it's possible that multiple bootloaders can be used for one project,
+# you can leave this unset, and the correct size will be selected
+# automatically.
+#
+# Sets the bootloader defined in the keyboard's/keymap's rules.mk
+# Current options:
+#   atmel-dfu
+#   lufa-dfu
+#   qmk-dfu
+#   halfkay
+#   caterina
+#   bootloadHID
+#
+# BOOTLOADER_SIZE can still be defined manually, but it's recommended
+# you add any possible configuration to this list
+
+ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
+    OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
+    OPT_DEFS += -DBOOTLOADER_DFU
+    BOOTLOADER_SIZE = 4096
+endif
+ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
+    OPT_DEFS += -DBOOTLOADER_LUFA_DFU
+    OPT_DEFS += -DBOOTLOADER_DFU
+    BOOTLOADER_SIZE = 4096
+endif
+ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
+    OPT_DEFS += -DBOOTLOADER_QMK_DFU
+    OPT_DEFS += -DBOOTLOADER_DFU
+    BOOTLOADER_SIZE = 4096
+endif
+ifeq ($(strip $(BOOTLOADER)), halfkay)
+    OPT_DEFS += -DBOOTLOADER_HALFKAY
+    BOOTLOADER_SIZE = 512
+endif
+ifeq ($(strip $(BOOTLOADER)), caterina)
+    OPT_DEFS += -DBOOTLOADER_CATERINA
+    BOOTLOADER_SIZE = 4096
+endif
+ifeq ($(strip $(BOOTLOADER)), bootloadHID)
+    OPT_DEFS += -DBOOTLOADER_BOOTLOADHID
+    BOOTLOADER_SIZE = 4096
+endif
+
+ifdef BOOTLOADER_SIZE
+    OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
+endif

build_keyboard.mk

@@ -230,6 +230,7 @@ VPATH += $(USER_PATH)
 include common_features.mk
 include $(TMK_PATH)/protocol.mk
 include $(TMK_PATH)/common.mk
+include bootloader.mk
 
 SRC += $(TMK_COMMON_SRC)
 OPT_DEFS += $(TMK_COMMON_DEFS)
@@ -266,10 +267,10 @@ $(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC)
 $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
 
 # Default target.
-all: build sizeafter
+all: build check-size
 
 # Change the build target to build a HEX file or a library.
-build: elf hex
+build: elf cphex
 #build: elf hex eep lss sym
 #build: lib
 

docs/_summary.md

@@ -1,7 +1,7 @@
 * [Getting started](README.md)
   * [QMK Introduction](getting_started_introduction.md)
   * [Install Build Tools](getting_started_build_tools.md)
-    * Alternative: [Vagrant Guide](getting_started_vagrant_guide.md)
+    * Alternative: [Vagrant Guide](getting_started_vagrant.md)
   * [Build/Compile instructions](getting_started_make_guide.md)
   * [Flashing instructions](flashing.md)
   * [Contributing to QMK](contributing.md)
@@ -26,6 +26,7 @@
   * [Backlight](feature_backlight.md)
   * [Bootmagic](feature_bootmagic.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
+  * [Grave Escape](feature_grave_escape.md)
   * [Key Lock](feature_key_lock.md)
   * [Layouts](feature_layouts.md)
   * [Leader Key](feature_leader_key.md)
@@ -70,7 +71,6 @@
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP flashing guide](isp_flashing_guide.md)
-  * [Modding your keyboard](modding_your_keyboard.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/contributing.md

@@ -122,7 +122,7 @@ We also ask that you follow these guidelines:
 
 ## Quantum/TMK Core
 
-Before you put a lot of work into building your new feature you should make sure you are implementing it in the best way. You can get a basic understanding of QMK by reading [Understaning QMK](understanding_qmk.html), which will take you on a tour of the QMK program flow. From here you should talk to us to get a sense of the best way to implement your idea. There are two main ways to do this:
+Before you put a lot of work into building your new feature you should make sure you are implementing it in the best way. You can get a basic understanding of QMK by reading [Understaning QMK](understanding_qmk.md), which will take you on a tour of the QMK program flow. From here you should talk to us to get a sense of the best way to implement your idea. There are two main ways to do this:
 
 * [Chat on Gitter](https://gitter.im/qmk/qmk_firmware)
 * [Open an Issue](https://github.com/qmk/qmk_firmware/issues/new)

docs/custom_quantum_functions.md

@@ -2,7 +2,7 @@
 
 For a lot of people a custom keyboard is about more than sending button presses to your computer. You want to be able to do things that are more complex than simple button presses and macros. QMK has hooks that allow you to inject code, override functionality, and otherwise customize how your keyboard behaves in different situations. 
 
-This page does not assume any special knowledge about QMK, but reading [Understanding QMK](understanding_qmk.html) will help you understand what is going on at a more fundamental level.
+This page does not assume any special knowledge about QMK, but reading [Understanding QMK](understanding_qmk.md) will help you understand what is going on at a more fundamental level.
 
 ## A Word on Core vs Keyboards vs Keymap
 

docs/faq_build.md

@@ -1,6 +1,6 @@
 # Frequently Asked Build Questions
 
-This page covers questions about building QMK. If you have not yet you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](make_instructions.md) guides.
+This page covers questions about building QMK. If you have not yet you should read the [Build Environment Setup](getting_started_build_tools.md) and [Make Instructions](getting_started_make_guide.md) guides.
 
 ## Can't program on Linux
 You will need proper permission to operate a device. For Linux users see udev rules below. Easy way is to use `sudo` command, if you are not familiar with this command check its manual with `man sudo` or this page on line.

docs/faq_keymap.md

@@ -125,11 +125,9 @@ https://github.com/tmk/tmk_keyboard/issues/213
 https://github.com/tekezo/Karabiner/issues/403
 
 
-## Esc and `~ on a key
+## Esc and `~ on a single key
 
-Use `GRAVE_ESC` or `KC_GESC` in your keymap. `GUI`+`GRAVE_ESC` results in `` ` `` and `SHIFT`+`GRAVE_ESC` results in `~`.
+See the [Grave Escape](feature_grave_escape.md) feature.
-
-Note that this will break the CTRL+SHIFT+ESC shortcut to the Windows task manager. Use `#define GRAVE_ESC_CTRL_OVERRIDE` in your `config.h` to get the shortcut back. With this option, `ESC_GRAVE` results in `ESC` if `CTRL` is held, even if `SHIFT` or `GUI` are also held.
 
 ## Arrow on Right Modifier keys with Dual-Role
 This turns right modifer keys into arrow keys when the keys are tapped while still modifiers when the keys are hold. In TMK the dual-role function is dubbed **TAP**.

docs/feature_advanced_keycodes.md

@@ -15,7 +15,7 @@ This will allow you to use `FN_CAPS` and `ALT_TAB` in your `KEYMAP()`, keeping i
 
 ### Limits of these aliases
 
-Currently, the keycodes able to used with these functions are limited to the [Basic Keycodes](keycodes_basic.html), meaning you can't use keycodes like `KC_TILD`, or anything greater than 0xFF. For a full list of the keycodes able to be used see [Basic Keycodes](keycodes_basic.html).
+Currently, the keycodes able to used with these functions are limited to the [Basic Keycodes](keycodes_basic.md), meaning you can't use keycodes like `KC_TILD`, or anything greater than 0xFF. For a full list of the keycodes able to be used see [Basic Keycodes](keycodes_basic.md).
 
 # Switching and toggling layers
 
@@ -131,7 +131,7 @@ We've added shortcuts to make common modifier/tap (mod-tap) mappings more compac
 
 # One Shot Keys
 
-One shot keys are keys that remain active until the next key is pressed, and then are releasd. This allows you to type keyboard combinations without pressing more than one key at a time.
+One shot keys are keys that remain active until the next key is pressed, and then are released. This allows you to type keyboard combinations without pressing more than one key at a time. These keys are usually called "Sticky keys" or "Dead keys".
 
 For example, if you define a key as `OSM(MOD_LSFT)`, you can type a capital A character by first pressing and releasing shift, and then pressing and releasing A. Your computer will see the shift key being held the moment shift is pressed, and it will see the shift key being released immediately after A is released.
 

docs/feature_grave_esc.md

@@ -0,0 +1,17 @@
+# Grave Escape
+
+Grave Escape is a feature that allows you to share the grave key (`\`` and `~`) on the same key as Escape. When `KC_GESC` is used it will act as `KC_ESC`, unless Shift or GUI is pressed, in which case it will act as `KC_GRAVE`.
+
+
+| Key | Alias | Description |
+|-----|-------|-------------|
+| `GRAVE_ESC` | `KC_GESC` | Act as `KC_ESC` normally, or `KC_GRAVE` when GUI or Shift are held. |
+
+There are several possible key combinations this will break, among them Ctrl+Shift+Esc on Windows and Cmd+Opt+Esc on macOS. You can use these options in your `config.h` to work around this:
+
+| Option | Description |
+|--------|-------------|
+| `GRAVE_ESC_ALT_OVERRIDE` | Always send Escape if Alt is pressed. |
+| `GRAVE_ESC_CTRL_OVERRIDE` | Always send Escape if Ctrl is pressed. |
+| `GRAVE_ESC_GUI_OVERRIDE` | Always send Escape if GUI is pressed. |
+| `GRAVE_ESC_SHIFT_OVERRIDE` | Always send Escape if SHIFT is pressed. |

docs/feature_key_lock.md

@@ -8,4 +8,4 @@ Here's how to use it:
 2. Enable key lock by including `KEY_LOCK_ENABLE = yes` in your Makefile.
 3. That's it!
 
-Important: switching layers does not cancel the key lock. Additionally, key lock is only able to hold standard action keys and One Shot modifier keys (for example, if you have your shift defined as `OSM(KC_LSFT)`; see [One Shot Keys](quantum_keycodes.md#one-shot-keys)). This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as KC_LPRN. If it's in the [basic_keycodes](basic_keycodes.md) list, it can be held. If it's not, then it can't be.
+Important: switching layers does not cancel the key lock. Additionally, key lock is only able to hold standard action keys and One Shot modifier keys (for example, if you have your shift defined as `OSM(KC_LSFT)`; see [One Shot Keys](quantum_keycodes.md#one-shot-keys)). This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as KC_LPRN. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held. If it's not, then it can't be.

docs/feature_rgblight.md

@@ -87,8 +87,8 @@ These control the RGB Lighting functionality.
 | Long Name | Short Name | Description |
 |-----------|------------|-------------|
 ||`RGB_TOG`|toggle on/off|
-||`RGB_MOD`|cycle through modes|
+|`RGB_MODE_FORWARD`|`RGB_MOD`|cycle through modes, use reverse direction when shift is held|
-||`RGB_SMOD`|cycle through modes, use reverse direction when shift is hold|
+|`RGB_MODE_REVERSE`|`RGB_RMOD`|cycle through modes in reverse (also suppost shift to go forward)|
 ||`RGB_HUI`|hue increase|
 ||`RGB_HUD`|hue decrease|
 ||`RGB_SAI`|saturation increase|
@@ -104,6 +104,8 @@ These control the RGB Lighting functionality.
 |`RGB_MODE_XMAS`|`RGB_M_X`| Switch to the Christmas animation |
 |`RGB_MODE_GRADIENT`|`RGB_M_G`| Switch to the static gradient mode |
 
+note: for backwards compatibility, `RGB_SMOD` is an alias for `RGB_MOD`.
+
 ## Hardware Modification
 
 ![Planck with RGB Underglow](https://raw.githubusercontent.com/qmk/qmk_firmware/master/keyboards/planck/keymaps/yang/planck-with-rgb-underglow.jpg)

docs/feature_userspace.md

@@ -73,8 +73,15 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
   case KC_MAKE:
     if (!record->event.pressed) {
-      SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP);
+      SEND_STRING("make " QMK_KEYBOARD ":" QMK_KEYMAP
-      SEND_STRING(SS_TAP(X_ENTER));
+#if  (defined(BOOTLOADER_DFU) || defined(BOOTLOADER_LUFA_DFU) || defined(BOOTLOADER_QMK_DFU))
+       ":dfu "
+#elif defined(BOOTLOADER_HALFKAY)
+      ":teensy "
+#elif defined(BOOTLOADER_CATERINA)
+       ":avrdude "
+#endif
+        SS_TAP(X_ENTER));
     }
     return false;
     break;
@@ -85,3 +92,5 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 
 This will add a new `KC_MAKE`  keycode that can be used in any of your keymaps.  And this keycode will output `make <keyboard>:<keymap">`, making frequent compiling easier.  And this will work with any keyboard and any keymap as it will output the current boards info, so that you don't have to type this out every time. 
 
+Additionally, this should flash the newly compiled firmware automatically, using the correct utility, based on the bootloader settings (or default to just generating the HEX file). However, it should be noted that this may not work on all systems. AVRDUDE doesn't work on WSL, namely (and will dump the HEX in the ".build" folder instead).
+

docs/features.md

@@ -17,7 +17,7 @@ QMK has a staggering number of features for building your keyboard. It can take
 * [Pointing Device](feature_pointing_device.md) - Framework for connecting your custom pointing device to your keyboard.
 * [PS2 Mouse](feature_ps2_mouse.md) - Driver for connecting a ps2 mouse directly to your keyboard.
 * [RGB Light](feature_rgblight.md) - RGB lighting for your keyboard.
-* [Space Cadet](feature_space_cadet_shift.md) - Use your left/right shift keys to type parenthesis and brackets.
+* [Space Cadet](feature_space_cadet.md) - Use your left/right shift keys to type parenthesis and brackets.
 * [Stenography](feature_stenography.md) - Put your keyboard into Plover mode for stenography use.
 * [Tap Dance](feature_tap_dance.md) - Make a single key do as many things as you want.
 * [Terminal](feature_terminal.md) - CLI interface to the internals of your keyboard.

docs/flashing.md

@@ -1,12 +1,20 @@
-# Flashing Intrustructions
+# Flashing Intrustructions / Bootloader Information
 
 There are quite a few different types of bootloaders that keyboards use, and just about all of the use a different flashing method. Luckily, projects like the [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) aim to be compatible with all the different types without having to think about it much, but this article will describe the different types of bootloaders, and available methods for flashing them.
 
+If you have a bootloader selected with the `BOOTLOADER` variable in your `rules.mk`, QMK will automatically calculate if your .hex file is the right size to be flashed to the device, and output the total size it bytes (along with the max). To run this process manually, compile with the target `check-size`, eg `make planck/rev4:default:check-size`.
+
 ## DFU
 
 Atmel's DFU bootloader comes on all atmega32u4 chips by default, and is used by many keyboards that have their own ICs on their PCBs (Older OLKB boards, Clueboards). Some keyboards may also use LUFA's DFU bootloader (or QMK's fork) (Newer OLKB boards) that adds in additional features specific to that hardware.
 
-These bootloaders are usually 4096 bytes for the atmega32u4 chip. 
+To ensure compatability with the DFU bootloader, make sure this block is present your `rules.mk` (optionally with `lufa-dfu` or `qmk-dfu` instead):
+
+    # Bootloader
+    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+    #     different sizes, comment this out, and the correct address will be loaded 
+    #     automatically (+60). See bootloader.mk for all options.
+    BOOTLOADER = atmel-dfu
 
 Compatible flashers:
 
@@ -26,15 +34,32 @@ or:
 
     make <keyboard>:<keymap>:dfu
 
+### QMK DFU
+
+QMK has a fork of the LUFA DFU bootloader that allows for a simple matrix scan for exiting the bootloader and returning to the application, as well as flashing an LED/making a ticking noise with a speaker when things are happening. To enable these features, use this block in your `config.h` (The key that exits the bootloader needs to be hooked-up to the INPUT and OUTPUT defined here):
+
+    #define QMK_ESC_OUTPUT F1 // usually COL
+    #define QMK_ESC_INPUT D5 // usually ROW
+    #define QMK_LED E6
+    #define QMK_SPEAKER C6
+
+The Manufacturer and Product names are automatically pulled from your `config.h`, and "Bootloader" is added to the product.
+
+To generate this bootloader, use the `bootloader` target, eg `make planck/rev4:default:bootloader`.
+
+To generate a production-ready .hex file (containing the application and the bootloader), use the `production` target, eg `make planck/rev4:default:production`.
+
 ## Caterina
 
 Arduino boards and their clones use the [Caterina bootloader](https://github.com/arduino/Arduino/tree/master/hardware/arduino/avr/bootloaders/caterina) (any keyboard built with a Pro Micro, or clone), and uses the avr109 protocol to communicate through virtual serial. Bootloaders like [A-Star](https://www.pololu.com/docs/0J61/9) are based on Caterina.
 
-This block of code allows for Caterina compatibility in QMK:
+To ensure compatability with the Caterina bootloader, make sure this block is present your `rules.mk`:
 
-    #define CATERINA_BOOTLOADER
+    # Bootloader
-
+    #     This definition is optional, and if your keyboard supports multiple bootloaders of
-These bootloaders are usually 4096 bytes for the atmega32u4 chip. 
+    #     different sizes, comment this out, and the correct address will be loaded 
+    #     automatically (+60). See bootloader.mk for all options.
+    BOOTLOADER = caterina
 
 Compatible flashers:
 
@@ -57,7 +82,13 @@ or
 
 Halfkay is a super-slim protocol developed by PJRC that uses HID, and come on all Teensys (namely the 2.0).
 
-This bootloader is 512 bytes.
+To ensure compatability with the Halfkay bootloader, make sure this block is present your `rules.mk`:
+
+    # Bootloader
+    #     This definition is optional, and if your keyboard supports multiple bootloaders of
+    #     different sizes, comment this out, and the correct address will be loaded 
+    #     automatically (+60). See bootloader.mk for all options.
+    BOOTLOADER = halfkay
 
 Compatible flashers:
 

docs/getting_started_make_guide.md

@@ -13,7 +13,7 @@ The full syntax of the `make` command is `<keyboard_folder>:<keymap>:<target>`,
 
 The `<target>` means the following
 * If no target is given, then it's the same as `all` below
-* `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck/rev4:default:all` will generate a single .hex, while `make planck/rev4:all` will generate a hex for every keymap available to the planck.
+* `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck/rev4:default` will generate a single .hex, while `make planck/rev4:all` will generate a hex for every keymap available to the planck.
 * `dfu`, `teensy` or `dfu-util`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme. 
  * **Note**: some operating systems need root access for these commands to work, so in that case you need to run for example `sudo make planck/rev4:default:dfu`.
 * `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.

docs/glossary.md

@@ -41,7 +41,7 @@ A macro which has been recorded on the keyboard and which will be lost when the
 ## Eclipse
 An IDE that is popular with many C developers.
 
-* [Eclipse Setup Instructions](eclipse.html)
+* [Eclipse Setup Instructions](eclipse.md)
 
 ## Firmware
 The software that controls your MCU.
@@ -62,7 +62,7 @@ In-system programming, a method of programming an AVR chip using external hardwa
 An interface for receiving debugging messages from your keyboard. You can view these messages using [QMK Flasher](https://github.com/qmk/qmk_flasher) or [PJRC's hid_listen](https://www.pjrc.com/teensy/hid_listen.html)
 
 ## Keycode
-A 2-byte number that represents a particular key. `0x00`-`0xFF` are used for [Basic Keycodes](keycodes_basic.html) while `0x100`-`0xFFFF` are used for [Quantum Keycodes](quantum_keycodes.html).
+A 2-byte number that represents a particular key. `0x00`-`0xFF` are used for [Basic Keycodes](keycodes_basic.md) while `0x100`-`0xFFFF` are used for [Quantum Keycodes](quantum_keycodes.md).
 
 ## Key Down
 An event that happens when a key is pressed down, but is completed before a key is released.
@@ -79,7 +79,7 @@ An abstraction used to allow a key to serve multiple purposes. The highest activ
 ## Leader Key
 A feature that allows you to tap the leader key followed by a sequence of 1, 2, or 3 keys to activate key presses or other quantum features.
 
-* [Leader Key Documentation](feature_leader_key.html)
+* [Leader Key Documentation](feature_leader_key.md)
 
 ## LED
 Light Emitting Diode, the most common device used for indicators on a keyboard.
@@ -104,13 +104,13 @@ A key that is held down while typing another key to modify the action of that ke
 ## Mousekeys
 A feature that lets you control your mouse cursor and click from your keyboard.
 
-* [Mousekeys Documentation](feature_mouse_keys.html)
+* [Mousekeys Documentation](feature_mouse_keys.md)
 
 ## N-Key Rollover (NKRO)
 A term that applies to keyboards that are capable of reporting any number of key-presses at once.
 
 ## Oneshot Modifier
-A modifier that acts as if it is held down until another key is released, so you can press the mod and then press the key, rather than holding the mod while pressing the key.
+A modifier that acts as if it is held down until another key is released, so you can press the mod and then press the key, rather than holding the mod while pressing the key. Also known as a Sticky key or a Dead key.
 
 ## ProMicro
 A low cost AVR development board. Clones of this device are often found on ebay very inexpensively (under $5) but people often struggle with flashing their pro micros.
@@ -133,7 +133,7 @@ A 1 byte number that is sent as part of a HID report over USB that represents a
 ## Space Cadet Shift
 A special set of shift keys which allow you to type various types of braces by tapping the left or right shift one or more times.
 
-* [Space Cadet Shift Documentation](feature_space_cadet.html)
+* [Space Cadet Shift Documentation](feature_space_cadet.md)
 
 ## Tap
 Pressing and releasing a key. In some situations you will need to distinguish between a key down and a key up event, and Tap always refers to both at once.

docs/keymap.md

@@ -77,7 +77,7 @@ Key with `KC_TRANS` (`KC_TRNS` and `_______` are the alias) doesn't has its own
 
 ## Anatomy Of A `keymap.c`
 
-For this example we will walk through the [default Clueboard 66% keymap](https://github.com/qmk/qmk_firmware/blob/master/keyboards/clueboard_66/keymaps/default/keymap.c). You'll find it helpful to open that file in another browser window so you can look at everything in context.
+For this example we will walk through an [older version of the default Clueboard 66% keymap](https://github.com/qmk/qmk_firmware/blob/ca01d94005f67ec4fa9528353481faa622d949ae/keyboards/clueboard/keymaps/default/keymap.c). You'll find it helpful to open that file in another browser window so you can look at everything in context.
 
 There are 3 main sections of a `keymap.c` file you'll want to concern yourself with:
 

docs/understanding_qmk.md

@@ -2,7 +2,7 @@
 
 This document attempts to explain how the QMK firmware works from a very high level. It assumes you understand basic programming concepts but does not (except where needed to demonstrate) assume familiarity with C. It assumes that you have a basic understanding of the following documents:
 
-* [QMK Overview](qmk_overview.md)
+* [Introduction](getting_started_introduction.md)
 * [How Keyboards Work](how_keyboards_work.md)
 * [FAQ](faq.md)
 

keyboards/atreus/keymaps/khitsule/config.h

@@ -0,0 +1,10 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define PREVENT_STUCK_MODIFIERS
+
+#define IGNORE_MOD_TAP_INTERRUPT
+
+#endif

keyboards/atreus/keymaps/khitsule/keymap.c

@@ -0,0 +1,64 @@
+// Personal keymap of khitsule
+
+#include "atreus.h"
+
+#define ALPH 0 
+#define LOWR 1 
+#define RAIS 2 
+
+// enum layers {
+//   ALPH, //alpha qwerty
+//   LOWR, //layer 1: nav and functions
+//   RAIS //layer 2: numpad and symbols
+// };
+
+// define any macros here to keep keymap clean and readable
+
+#define KM_DLEFT LGUI(LCTL(KC_LEFT))
+#define KM_DRIGHT LGUI(LCTL(KC_RIGHT))
+
+#define tap_mod_macro(record, mod, macro) ( ((record)->event.pressed) ? \
+     ( ((record)->tap.count <= 0 || (record)->tap.interrupted) ? MACRO(D(mod), END) : MACRO_NONE ) : \
+     ( ((record)->tap.count > 0 && !((record)->tap.interrupted)) ? (macro) : MACRO(U(mod), END) ) )
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[ALPH] = {
+  {KC_Q,   KC_W,      KC_E,     KC_R,           KC_T,             KC_TRNS,         KC_Y,              KC_U,    KC_I,      KC_O,    KC_P},
+  {KC_A,   KC_S,      KC_D,     KC_F,           KC_G,             KC_TRNS,         KC_H,              KC_J,    KC_K,      KC_L,    KC_SCLN},
+  {KC_Z,   KC_X,      KC_C,     KC_V,           KC_B,             CTL_T(KC_SPC),   KC_N,              KC_M,    KC_COMM,   KC_DOT,  KC_SLSH},
+  {KC_ESC, KC_TRNS,   KC_TRNS,  ALT_T(KC_ENT),  LT(LOWR, KC_TAB), SFT_T(KC_BSPC),  LT(RAIS, KC_DEL),  KC_LGUI, KC_TRNS,   KC_QUOT, KC_MINUS}
+},
+[LOWR] = {
+  {KC_PSCR,  KC_HOME,   KC_UP,        KC_END,   KC_TRNS, KC_TRNS, KC_LPRN,       KC_F7,    KC_F8,   KC_F9, KC_RPRN},
+  {KC_VOLU,  KC_LEFT,   KC_DOWN,      KC_RIGHT, KC_PGUP, KC_TRNS, KC_LBRC,       KC_F4,    KC_F5,   KC_F6, KC_RBRC},
+  {KC_VOLD,  KC_MPRV,   KC_MPLY,      KC_MNXT,  KC_PGDN, KC_TRNS, LSFT(KC_LBRC), KC_F1,    KC_F2,   KC_F3, LSFT(KC_RBRC)},
+  {KM_DLEFT, KM_DRIGHT, LALT(KC_TAB), KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,       KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS}
+},
+[RAIS] = {
+  {KC_EXLM, KC_AT,    KC_HASH,  KC_DLR,  KC_PERC, KC_TRNS, KC_TRNS,   KC_7,     KC_8, KC_9,   KC_TRNS},
+  {KC_CIRC, KC_AMPR,  KC_GRV,   KC_TILD, KC_PIPE, KC_TRNS, KC_PLUS,   KC_4,     KC_5, KC_6,   KC_ASTR},
+  {KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_BSLS, KC_TRNS, KC_MINUS,  KC_1,     KC_2, KC_3,   KC_SLASH},
+  {RESET,   KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,  KC_0, KC_DOT,  KC_EQL}
+}
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [1] = ACTION_MACRO_TAP(1),
+  [2] = ACTION_MACRO_TAP(2)
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  switch(id) {    
+    case 1:
+      return tap_mod_macro(record, LGUI, MACRO( D(LSFT), T(9), U(LSFT), END));
+      break;
+    case 2:
+      return tap_mod_macro(record, LALT, MACRO( D(LSFT), T(0), U(LSFT), END));
+      break;
+
+  }
+  return MACRO_NONE;
+};

keyboards/atreus/keymaps/khitsule/readme.md

@@ -0,0 +1,23 @@
+# Atreus Layout by Khitsule
+![Khitsule](https://i.imgur.com/wuki3aM.png)
+
+[KLE link](http://www.keyboard-layout-editor.com/#/gists/35ed66c55456699fd8f5d06750984a07)
+
+## Layers
+| Layer | Legend |
+| ----- | ------ |
+| Base  |  Top left (black) |
+| Lower | Top right (purple) |
+| Raise | Bottom right (pink) |
+
+## Features
+* Raise/lower layers focus first on one-handed use
+* Numpad on right hand with raise layer
+* Navigation on left hand with lower layer (ESDF)
+    * D refers to desktop left/right on Win 10 (win+ctrl+left/right)
+* Heavy use of hold/tap dual function keys
+    * Ctrl/Space
+    * Shift/Backspace
+    * Alt/Enter
+    * Lower/Tab
+    * Raise/Delete

keyboards/atreus/rules.mk

@@ -5,7 +5,6 @@ ifdef TEENSY2
     ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
 else
     OPT_DEFS += -DATREUS_ASTAR
-    OPT_DEFS += -DCATERINA_BOOTLOADER
     ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
                             avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
 endif
@@ -27,7 +26,6 @@ MCU = atmega32u4
 #     software delays.
 F_CPU = 16000000
 
-
 #
 # LUFA specific
 #
@@ -47,19 +45,20 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+ifdef TEENSY2
+    BOOTLOADER = halfkay
+else
+    BOOTLOADER = caterina
+endif
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/atreus62/config.h

@@ -38,8 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { D2, D3, D1, D0, D4 }
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, C6 }
 
-#define CATERINA_BOOTLOADER
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION ROW2COL
 

keyboards/atreus62/rules.mk

@@ -35,18 +35,15 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically

keyboards/bfake/config.h

@@ -41,7 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
 
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/bfake/rules.mk

@@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
 # processor frequency
 F_CPU = 12000000
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
 # build options
 BOOTMAGIC_ENABLE = yes
 MOUSEKEY_ENABLE = yes
@@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
 RGBLIGHT_CUSTOM_DRIVER = yes
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
 
 # custom matrix setup
 CUSTOM_MATRIX = yes

keyboards/bmini/config.h

@@ -34,7 +34,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
 
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/bmini/rules.mk

@@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
 # processor frequency
 F_CPU = 12000000
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
 # build options
 BOOTMAGIC_ENABLE = yes
 MOUSEKEY_ENABLE = yes
@@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
 RGBLIGHT_CUSTOM_DRIVER = yes
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
 
 # custom matrix setup
 CUSTOM_MATRIX = yes

keyboards/chimera_ortho/rules.mk

@@ -1,6 +1,5 @@
 
 OPT_DEFS += -DCHIMERA_ORTHO_PROMICRO
-OPT_DEFS += -DCATERINA_BOOTLOADER
 CHIMERA_ORTHO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
                          avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
 
@@ -45,19 +44,15 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/converter/usb_usb/ble/rules.mk

@@ -1,4 +1,3 @@
 BLUETOOTH = AdafruitBLE
 ADAFRUIT_BLE_ENABLE = yes
-OPT_DEFS +=  -DCATERINA_BOOTLOADER
 F_CPU = 8000000

keyboards/converter/usb_usb/rules.mk

@@ -43,19 +43,15 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
 # Interrupt driven control endpoint task
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/crawlpad/config.h

@@ -0,0 +1,52 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6070
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    WoodKeys.click
+#define PRODUCT         CrawlPad
+#define DESCRIPTION     ATX Keycrawl 2017
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 4
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F0, F1, F4, F5 }
+#define MATRIX_COL_PINS { D4, D5, D6, D7 }
+#define UNUSED_PINS
+
+/* Pins for custom per-row LEDs. Should be changed to use named pins. */
+#define LED_ROW_PINS { 8, 9, 10, 11 }
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    false \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#ifdef RGBLIGHT_ENABLE
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 3
+#endif
+
+#endif

keyboards/crawlpad/crawlpad.c

@@ -0,0 +1 @@
+#include "crawlpad.h"

keyboards/crawlpad/crawlpad.h

@@ -0,0 +1,18 @@
+#ifndef KB_H
+#define KB_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+	K00, K01, K02, K03, \
+	K10, K11, K12, K13, \
+	K20, K21, K22, K23, \
+	K30, K31, K32, K33  \
+) { \
+	{ K00,   K01,   K02,   K03 }, \
+	{ K10,   K11,   K12,   K13 }, \
+	{ K20,   K21,   K22,   K23 }, \
+	{ K30,   K31,   K32,   K33 }  \
+}
+
+#endif

keyboards/crawlpad/crawlpad.json

@@ -0,0 +1 @@
+{"version":1,"keyboard":{"keys":[{"id":0,"legend":"7\nHome\n\n\n\n\n\nNLCK","state":{"x":0,"y":1,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000\n\n\n\n\n\n\n#0015d4","fa":[0,1,0,0,0,0,0,1]},"row":0,"col":0,"keycodes":[{"id":"KC_P7","fields":[]},{"id":"KC_NLCK","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":1,"legend":"8\n↑\n\n\n\n\n\nBL1","state":{"x":1,"y":1,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000\n\n\n\n\n\n\n#0015d4","fa":[0,0,0,0,0,0,0,1]},"row":0,"col":1,"keycodes":[{"id":"KC_P8","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":2,"legend":"9\nPgUp","state":{"x":2,"y":1,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000","fa":[0,0,0,0,0,0,0,1]},"row":0,"col":2,"keycodes":[{"id":"KC_P9","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":3,"legend":"+\n\n\n\n\n\n\n/","state":{"x":3,"y":1,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000\n\n\n#020ad1\n\n\n\n#0015d4","fa":[0,0,0,0,0,0,0,1],"f":3},"row":0,"col":3,"keycodes":[{"id":"KC_PPLS","fields":[]},{"id":"KC_PSLS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":4,"legend":"4\n←","state":{"x":0,"y":2,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000","fa":[0,0,0,0,0,0,0,1],"f":3},"row":1,"col":0,"keycodes":[{"id":"KC_P4","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":5,"legend":"5\n\n\n\n\n\n\nBL2","state":{"x":1,"y":2,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000\n\n\n\n\n\n\n#0015d4","fa":[0,0,0,0,0,0,0,1],"f":3},"row":1,"col":1,"keycodes":[{"id":"KC_P5","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":6,"legend":"6\n→","state":{"x":2,"y":2,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000","fa":[0,0,0,0,0,0,0,1],"f":3},"row":1,"col":2,"keycodes":[{"id":"KC_P6","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]}]},{"id":7,"legend":"-","state":{"x":3,"y":2,"r":0,"rx":0,"ry":0,"w":1,"h":1,"x2":0,"y2":0,"w2":0,"h2":0,"t":"#000000","fa":[0,0,0,0,0,0,0,1],"f":3},"row":1,"col":3,"keycodes":[{"id":"KC_PMNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNS","fields":[]},{"id":"KC_TRNLine truncated

keyboards/crawlpad/keymaps/default/keymap.c

@@ -0,0 +1,117 @@
+#include "../../crawlpad.h"
+
+enum custom_keycodes {
+  BL1 = SAFE_RANGE,
+  BL2,
+  BL3,
+  BL4
+};
+
+const uint8_t LED_PINS[] = LED_ROW_PINS;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+KEYMAP(
+    KC_P7, KC_P8, KC_P9, KC_PPLS,
+    KC_P4, KC_P5, KC_P6, KC_PMNS,
+    KC_P1, KC_P2, KC_P3, KC_PAST,
+    MO(1), KC_P0, KC_PDOT, KC_ENT),
+
+KEYMAP(
+    KC_NLCK, BL1, KC_TRNS, KC_PSLS,
+    RESET, BL2, KC_TRNS, KC_TRNS,
+    KC_TRNS, BL3, KC_TRNS, KC_TRNS,
+    KC_TRNS, BL4, KC_TRNS, KC_TRNS),
+
+};
+
+void set_led(int idx, bool enable) {
+  uint8_t pin = LED_PINS[idx];
+  if (enable) {
+    _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF);
+  } else {
+    /* PORTx &= ~n */
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF);
+  }
+}
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  /* set LED row pins to output and low */
+  DDRB |= (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7);
+  PORTB &= ~(1 << 4) & ~(1 << 5) & ~(1 << 6) & ~(1 << 7);
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+  case BL1:
+    if (record->event.pressed) {
+      PORTB |= (1 << 4);
+    } else {
+      PORTB &= ~(1 << 4);
+    }
+    return false;
+  case BL2:
+    if (record->event.pressed) {
+      PORTB |= (1 << 5);
+    } else {
+      PORTB &= ~(1 << 5);
+    }
+    return false;
+  case BL3:
+    if (record->event.pressed) {
+      PORTB |= (1 << 6);
+    } else {
+      PORTB &= ~(1 << 6);
+    }
+    return false;
+  case BL4:
+    if (record->event.pressed) {
+      PORTB |= (1 << 7);
+    } else {
+      PORTB &= ~(1 << 7);
+    }
+    return false;
+  }
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/crawlpad/readme.md

@@ -0,0 +1,17 @@
+# Crawlpad
+
+![Crawlpad](https://imgur.com/8BnztWo)
+
+A 4x4 macropad/numpad, exclusively availabe at Keycrawl events.
+
+Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham)  
+Hardware Supported: Crawlpad  
+Hardware Availability: Exclusive to Keycrawl events, contact [awwwwwwyeaahhhhhh](https://www.reddit.com/user/awwwwwwyeaahhhhhh) for more details.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make crawlpad:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+For those that prefer a GUI tool, the crawlpad.json file in this repo can be used on [kbfirmware.com](http://kbfirmware.com].

keyboards/crawlpad/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no  # [Crawlpad] Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE ?= no # [Crawlpad] This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE ?= no # [Crawlpad] This can be enabled if a ws2812 strip is connected to the expansion port.

keyboards/deltasplit75/rules.mk

@@ -39,18 +39,15 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically

keyboards/deltasplit75/v2/config.h

@@ -37,8 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3, B2 }
 #define MATRIX_COL_PINS { B6, B5, B4, E6, D7, C6, D4, D1}
 
-#define CATERINA_BOOTLOADER
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 

keyboards/dichotemy/rules.mk

@@ -1,6 +1,5 @@
 
 OPT_DEFS += -DDICHOTEMY_PROMICRO
-OPT_DEFS += -DCATERINA_BOOTLOADER
 DICHOTEMY_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
                          avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
 
@@ -25,8 +24,6 @@ MCU = atmega32u4
 #     software delays.
 F_CPU = 16000000
 
-
-#
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
@@ -45,19 +42,15 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/eco/config.h

@@ -31,8 +31,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 4
 #define MATRIX_COLS 14
 
-#define CATERINA_BOOTLOADER
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 

keyboards/eco/rules.mk

@@ -34,18 +34,15 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically

keyboards/ergodox_ez/config.h

@@ -62,8 +62,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* number of backlight levels */
 #define BACKLIGHT_LEVELS 3
 
+#ifndef LED_BRIGHTNESS_LO
 #define LED_BRIGHTNESS_LO       15
+#endif
+#ifndef LED_BRIGHTNESS_HI
 #define LED_BRIGHTNESS_HI       255
+#endif
+#define LED_BRIGHTNESS_DEFAULT (LED_BRIGHTNESS_HI)
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN D7

keyboards/ergodox_ez/ergodox_ez.c

@@ -54,7 +54,7 @@ void matrix_init_kb(void) {
 void ergodox_blink_all_leds(void)
 {
     ergodox_led_all_off();
-    ergodox_led_all_set(LED_BRIGHTNESS_HI);
+    ergodox_led_all_set(LED_BRIGHTNESS_DEFAULT);
     ergodox_right_led_1_on();
     _delay_ms(50);
     ergodox_right_led_2_on();

keyboards/ergodox_ez/ergodox_ez.h

@@ -30,8 +30,12 @@ void ergodox_blink_all_leds(void);
 uint8_t init_mcp23018(void);
 uint8_t ergodox_left_leds_update(void);
 
+#ifndef LED_BRIGHTNESS_LO
 #define LED_BRIGHTNESS_LO       15
+#endif
+#ifndef LED_BRIGHTNESS_LO
 #define LED_BRIGHTNESS_HI       255
+#endif
 
 
 inline void ergodox_board_led_on(void)      { DDRD |=  (1<<6); PORTD |=  (1<<6); }

keyboards/ergodox_ez/keymaps/drashna/keymap.c

@@ -244,9 +244,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                 KC_MAKE,        KC_HASH,    KC_DLR,     KC_LPRN,    KC_RPRN,    KC_GRAVE,
                 KC_RESET,       KC_PERC,    KC_CIRC,    KC_LBRACKET,KC_RBRACKET,KC_TILD,    KC_COLEMAK,
                 KC_TRNS,          KC_AMPR,    KC_ASTR,    KC_COLN,    KC_SCOLON,
-                                                                  KC_TRNS, KC_TRNS,
+                                                                  RGB_SMOD, KC_RGB_T,
-                                                                  KC_TRNS,
+                                                                  RGB_HUI,
-                                                                  KC_TRNS, KC_TRNS, KC_TRNS,
+                                                                  RGB_M_R, RGB_M_SW, RGB_HUD,
                 
                 KC_QWERTY,   KC_F6,      KC_F7,      KC_F8,      KC_F9,      KC_F10,         KC_F11,
                 KC_DVORAK,   KC_KP_PLUS, KC_KP_7,    KC_KP_8,    KC_KP_9,    KC_KP_ASTERISK, KC_F12,

keyboards/ergodox_ez/rules.mk

@@ -54,18 +54,15 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = halfkay
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
 # If you have Left LEDs (see
 # https://geekhack.org/index.php?topic=22780.msg873819#msg873819 for
 # details), include the following define:

keyboards/gherkin/keymaps/mjt/config.h

@@ -52,8 +52,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
 #define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 }
 
-#define CATERINA_BOOTLOADER
-
 #define UNUSED_PINS
 
 /* COL2ROW or ROW2COL */

keyboards/gherkin/rules.mk

@@ -33,14 +33,15 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/handwired/MS_sculpt_mobile/rules.mk

@@ -5,21 +5,29 @@ SRC=  babblePaste.c
 
 ifdef ASTAR
   CFLAGS=-D ASTAR
- OPT_DEFS += -DBOOTLOADER_SIZE=4096
  MCU = atmega32u4
- OPT_DEFS += -DCATERINA_BOOTLOADER
  SCULPT_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done ; \
 		 avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
 
 else
  MCU = at90usb1286
- OPT_DEFS += -DBOOTLOADER_SIZE=2048
  SCULPT_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
 endif
 
 F_CPU = 16000000
 ARCH = AVR8
 F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+ifdef ASTAR
+  BOOTLOADER = caterina
+else
+  BOOTLOADER = atmel-dfu
+endif
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 

keyboards/handwired/reddot/rules.mk

@@ -36,30 +36,25 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
-
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
 ifdef TEENSY2
+    BOOTLOADER = halfkay
     OPT_DEFS += -DATREUS_TEENSY2
     ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
 else
+    BOOTLOADER = caterina
     OPT_DEFS += -DATREUS_ASTAR
-    OPT_DEFS += -DCATERINA_BOOTLOADER
     ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
                             avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
 endif
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 
-# MCU name
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 
 # Build Options
 #   change yes to no to disable

keyboards/handwired/space_oddity/config.h

@@ -11,8 +11,6 @@
 #define PRODUCT         Space Odyssey
 #define DESCRIPTION     Keyboard
 
-#define CATERINA_BOOTLOADER
-
 #define MOUSEKEY_INTERVAL 16
 #define MOUSEKEY_DELAY 0
 #define MOUSEKEY_TIME_TO_MAX 60

keyboards/handwired/space_oddity/rules.mk

@@ -33,14 +33,15 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   comment out to disable the options.
 #

keyboards/handwired/traveller/rules.mk

@@ -37,15 +37,23 @@ ARCH = AVR8
 F_USB = $(F_CPU)
 
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
 ifdef TEENSY2
+    BOOTLOADER = halfkay
     OPT_DEFS += -DATREUS_TEENSY2
     ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
 else
+    BOOTLOADER = caterina
     OPT_DEFS += -DATREUS_ASTAR
-    OPT_DEFS += -DCATERINA_BOOTLOADER
     ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
                             avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
 endif
+
+
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 

keyboards/handwired/woodpad/config.h

@@ -53,8 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
-#define CATERINA_BOOTLOADER
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 

keyboards/handwired/woodpad/keymaps/drashna/keymap.c

@@ -13,7 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "woodpad.h"
+#include QMK_KEYBOARD_H
 #include "drashna.h"
 
  // Each layer gets a name for readability, which is then used in the keymap matrix below.
@@ -97,12 +97,6 @@ void matrix_init_keymap(void) {
   // set Numlock LED to output and low
   DDRF |= (1 << 7);
   PORTF &= ~(1 << 7);
-
-
-  if (!(host_keyboard_leds() & (1 << USB_LED_NUM_LOCK))) {
-    register_code(KC_NUMLOCK);
-    unregister_code(KC_NUMLOCK);
-  }
 }
 
 void matrix_scan_keymap(void) {
@@ -114,3 +108,9 @@ void matrix_scan_keymap(void) {
   // Run Diablo 3 macro checking code.
 }
 
+void led_set_keymap(uint8_t usb_led) {
+  if (!(usb_led & (1<<USB_LED_NUM_LOCK))) {
+    register_code(KC_NUMLOCK);
+    unregister_code(KC_NUMLOCK);
+  }
+}

keyboards/handwired/woodpad/rules.mk

@@ -35,19 +35,16 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/iris/rev1/config.h

@@ -37,8 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { D7, E6, B4, B5, D4 }
 #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 }
 
-#define CATERINA_BOOTLOADER
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 

keyboards/iris/rev1/rev1.c

@@ -1,9 +1,5 @@
 #include "rev1.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
 
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
@@ -14,11 +10,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -29,11 +20,3 @@ void matrix_init_kb(void) {
 
 	matrix_init_user();
 };
-
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/iris/rev2/config.h

@@ -37,8 +37,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { D7, E6, B4, D2, D4 }
 #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
 
-#define CATERINA_BOOTLOADER
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 

keyboards/iris/rev2/rev2.c

@@ -1,10 +1,5 @@
 #include "rev2.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
-
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
     // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
@@ -14,11 +9,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -30,10 +20,3 @@ void matrix_init_kb(void) {
 	matrix_init_user();
 };
 
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/iris/rules.mk

@@ -39,18 +39,15 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically

keyboards/jj40/config.h

@@ -29,10 +29,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 15
 
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_LEVELS 3
+
 #define TAPPING_TOGGLE 3
 
 #define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
 
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/jj40/jj40.c

@@ -26,3 +26,15 @@ __attribute__ ((weak))
 void matrix_scan_user(void) {
     /* Nothing to do here... yet */
 }
+
+void matrix_init_kb(void) {
+
+  // Call the keymap level matrix init.
+  matrix_init_user();
+
+  // Set our LED pins as output
+  DDRB |= (1<<6);
+}
+
+void matrix_init_user(void) {
+}

keyboards/jj40/keymaps/fun40/config.h

@@ -0,0 +1,9 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#define FORCE_NKRO
+#define PREVENT_STUCK_MODIFIERS
+
+#endif

keyboards/jj40/keymaps/fun40/jj40.h

@@ -0,0 +1,70 @@
+/*
+Copyright 2017 Luiz Ribeiro <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include "quantum.h"
+// #include "keycode.h"
+// #include "action.h"
+
+#define KEYMAP_GRID( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
+    K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312  \
+) \
+{ \
+  { K012, K011, K010, K09, K05, K06, K07, K08, K04, K03, K02, K01 }, \
+  { K112, K111, K110, K19, K15, K16, K17, K18, K14, K13, K12, K11 }, \
+  { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+  { K212, K211, K210, K29, K25, K26, K27, K28, K24, K23, K22, K21 }, \
+  { K312, K311, K310, K39, K35, K36, K37, K38, K34, K33, K32, K31 }  \
+}
+
+#define KEYMAP_MIT( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
+    K31, K32, K33, K34, K35,    K3X,   K38, K39, K310, K311, K312  \
+) \
+{ \
+  { K012, K011, K010, K09, K05, K06, K07,   K08, K04, K03, K02, K01 }, \
+  { K112, K111, K110, K19, K15, K16, K17,   K18, K14, K13, K12, K11 }, \
+  { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+  { K212, K211, K210, K29, K25, K26, K27,   K28, K24, K23, K22, K21 }, \
+  { K312, K311, K310, K39, K35, K3X, KC_NO, K38, K34, K33, K32, K31 }  \
+}
+
+#define KEYMAP_OFFSET( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, \
+    K31, K32, K33, K34, K35, K36,    K3X,   K39, K310, K311, K312  \
+) \
+{ \
+  { K012, K011, K010, K09, K05, K06, K07,   K08, K04, K03, K02, K01 }, \
+  { K112, K111, K110, K19, K15, K16, K17,   K18, K14, K13, K12, K11 }, \
+  { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+  { K212, K211, K210, K29, K25, K26, K27,   K28, K24, K23, K22, K21 }, \
+  { K312, K311, K310, K39, K35, K36, K3X, KC_NO, K34, K33, K32, K31 }  \
+}
+
+#define KEYMAP KEYMAP_GRID
+#define LAYOUT_ortho_4x12 LAYOUT_planck_grid
+
+#endif

keyboards/jj40/keymaps/fun40/keymap.c

@@ -0,0 +1,123 @@
+#include "jj40.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#ifdef BACKLIGHT_ENABLE
+  #include "backlight.h"
+#endif
+
+#define _QWERTY 0
+#define _LOWER  1
+#define _RAISE  2
+#define _BL 4 // Backlight
+// #define _ADJUST 3
+#define TG_NKRO MAGIC_TOGGLE_NKRO
+
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |  Del | Alt  | GUI  |Lower | Space|Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT, \
+  KC_LCTL, KC_DEL, KC_LALT, KC_LGUI, MO(_LOWER),KC_SPC,KC_SPC,  MO(_RAISE),   KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  |      |      |  
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Shift|PrScr |ISO ~ |ISO | |      |      |      |      |      |bl_on |bl_stp| Enter|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | nkro | Alt  | NKRO |Lower | PgDn | PgUp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,KC_F7,   KC_F8,  KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, \
+  KC_LSFT, KC_PSCR, S(KC_NUHS), S(KC_NUBS), _______, _______, _______, _______, _______, BL_ON, BL_STEP, KC_ENT, \
+  KC_LCTL, MAGIC_TOGGLE_NKRO, KC_LALT, TG_NKRO, _______, KC_PGDN, KC_PGUP, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | Caps |  +   |  -   |  =   |   (  |   )  |      |   7  |   8  |   9  | Bksp | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Lock |  ~   |  _   |      |   [  |   ]  |      |   4  |   5  |   6  |      |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Ins  |  `   |   \  |   |  |   {  |   }  |      |   1  |   2  |   3  |   .  |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl |      | Alt  |      |Lower |      |      |Raise |   0  |      | Home | End  |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_CAPS, KC_MINS, KC_PLUS, KC_EQL,  KC_LPRN, KC_RPRN, _______, KC_7,  KC_8,    KC_9, KC_BSPC, KC_DEL, \
+  KC_LOCK,  KC_TILD, KC_UNDS, _______,KC_LBRC, KC_RBRC, _______, KC_4,  KC_5,    KC_6, _______, _______, \
+  KC_INS, KC_GRV, KC_BSLS, KC_PIPE,  KC_LCBR, KC_RCBR, _______, KC_1,  KC_2,    KC_3, KC_DOT, _______, \
+  KC_LCTL, _______, KC_LALT, _______, _______, _______, _______, _______, KC_0, _______, KC_HOME, KC_END \
+)
+
+/* Adjust
+ G = git
+ M = mail
+ * ,-----------------------------------------------------------------------------------.
+ * | gAdd |gStash|      | const|      | Clog |      |      | Mstk | Mrad |Mgmail|      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | gPush|      |      | if() |      | Clog2|      |      |      |      |Mcity |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | gPull|      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |Lower |      |      |Raise |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+
+
+/* Empty
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |Lower |      |      |Raise |      |      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+};
+
+// Macro actions for each corresponding ID.
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+  switch (id) {
+  case 0:
+    if (record->event.pressed) {
+      register_code(KC_RSFT);
+#ifdef BACKLIGHT_ENABLE
+      backlight_step();
+#endif
+    }
+    else {
+      unregister_code(KC_RSFT);
+    }
+    break;
+  }
+  return MACRO_NONE;
+};

keyboards/jj40/keymaps/fun40/readme.md

@@ -0,0 +1,4 @@
+# Fun 40%.
+
+* backlighting on flash  
+  * backlight fails on reboot

keyboards/jj40/keymaps/fun40/rules.mk

@@ -0,0 +1,20 @@
+
+
+BOOTMAGIC_ENABLE = yes       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no          # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = yes          # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/jj40/program

@@ -1,74 +0,0 @@
-#!/usr/bin/env python
-# Copyright 2017 Luiz Ribeiro <[email protected]>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-from __future__ import print_function
-
-import os
-import sys
-import time
-import usb
-
-if len(sys.argv) < 2:
-    print('Usage: %s <firmware.hex>' % sys.argv[0])
-    sys.exit(1)
-
-print('Searching for jj40... ', end='')
-
-dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D)
-if dev is None:
-    raise ValueError('Device not found')
-
-print('Found', end='\n\n')
-
-print('Device Information:')
-print('  idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
-print('  idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
-print('Manufacturer: %s' % (dev.iManufacturer))
-print('Serial: %s' % (dev.iSerialNumber))
-print('Product: %s' % (dev.iProduct), end='\n\n')
-
-print('Transferring control to bootloader... ', end='')
-
-dev.set_configuration()
-
-request_type = usb.util.build_request_type(
-        usb.util.CTRL_OUT,
-        usb.util.CTRL_TYPE_CLASS,
-        usb.util.CTRL_RECIPIENT_DEVICE)
-
-USBRQ_HID_SET_REPORT = 0x09
-HID_REPORT_OPTION = 0x0301
-
-
-try:
-    dev.ctrl_transfer(
-            request_type,
-            USBRQ_HID_SET_REPORT,
-            HID_REPORT_OPTION,
-            0,
-            [0, 0, 0xFF] + [0] * 5
-            )
-except usb.core.USBError:
-    # for some reason I keep getting USBError, but it works!
-    pass
-
-# wait a bit until bootloader starts up
-time.sleep(2)
-
-print('OK')
-print('Programming...')
-if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0:
-    print('\nDone!')

keyboards/jj40/rules.mk

@@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
 # processor frequency
 F_CPU = 12000000
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
 # build options
 BOOTMAGIC_ENABLE = no
 MOUSEKEY_ENABLE = no
@@ -35,12 +41,14 @@ RGBLIGHT_ENABLE = no
 RGBLIGHT_CUSTOM_DRIVER = no
 KEY_LOCK_ENABLE = yes
 
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
 OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
 SRC = matrix.c i2c.c
 
 # programming options
-PROGRAM_CMD = ./keyboards/jj40/program $(TARGET).hex
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/katana60/config.h

@@ -0,0 +1,193 @@
+/*
+Copyright 2017 Baris Tosun
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    RominRonin CandyKeys
+#define PRODUCT         Katana60
+#define DESCRIPTION     QMK keyboard firmware for Katana60
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F5, F6, F4, F1, D0 }
+#define MATRIX_COL_PINS { B7, B3, B2, B1, B0, C7, D1, D2, C6, B6, B5, B4, D4, D6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION ROW2COL
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define TAPPING_TERM 200
+#define PREVENT_STUCK_MODIFIERS
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+#endif

keyboards/katana60/katana60.c

@@ -0,0 +1,43 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "katana60.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/katana60/katana60.h

@@ -0,0 +1,40 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef KATANA60_H
+#define KATANA60_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+      k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, \
+      k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+      k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+      k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+      k00, k01, k02, k03, k04, k05, k06,           k09, k0a, k0b, k0c, k0d \
+) \
+{ \
+    { k00, k01, k02, k03, k04, k05, k06, KC_NO, KC_NO, k09, k0a, k0b, k0c, k0d, KC_NO  }, \
+    { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e  }, \
+    { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO  }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO  }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e  }, \
+}
+
+#endif

keyboards/katana60/keymaps/colemak/config.h

@@ -0,0 +1,24 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/katana60/keymaps/colemak/keymap.c

@@ -0,0 +1,106 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "katana60.h"
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Windows based definitions.
+#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer
+#define K_PRVWD LCTL(KC_LEFT)      // Previous word
+#define K_NXTWD LCTL(KC_RIGHT)     // Next word
+#define K_LSTRT KC_HOME            // Start of line
+#define K_LEND  KC_END             // End of line
+#define UNDO    LCTL(KC_Z)         // UNDO
+#define CUT     LCTL(KC_X)         // CUT
+#define COPY    LCTL(KC_C)         // COPY
+#define PASTE   LCTL(KC_V)         // PASTE
+
+
+#define BASE 0 // Default
+#define NUMB 1 // Numbers
+#define SYMB 2 // Symbols
+#define CURS 3 // Text Editing
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = KEYMAP( /* Base */
+  KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    DF(1),   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_PLUS,
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_LBRC,          KC_RBRC, KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
+  MO(3),   KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_HOME,          KC_PGUP, KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_ENT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_DEL,  KC_PGDN, KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+  MO(2),   KC_LCTL, KC_LGUI, KC_LALT,                   KC_BSPC, KC_ENT,  K_SPCFN,          KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT,MO(2)
+    ),
+[NUMB] = KEYMAP(
+  _______, _______, _______, _______, _______, _______, _______, DF(0),   KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______, _______,
+  _______, _______, _______, KC_MS_U, _______, _______, _______,          KC_7,    KC_8,    KC_9,    KC_PPLS, _______, _______, _______,
+  _______, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______,          KC_4,    KC_5,    KC_6,    KC_PPLS, _______, _______, _______,
+  _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, KC_1,    KC_2,    KC_3,    KC_PENT, _______, _______, _______,
+  _______, _______, _______, _______,                   KC_BTN1, _______, KC_P0,            KC_PDOT, KC_PENT, _______, _______, _______
+    ),
+[SYMB] = KEYMAP(
+  RESET,   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______,          _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_VOLD,          KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+  _______, KC_PLUS, KC_MINS, KC_EQL,  KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______,
+  _______, _______, _______, _______,                   KC_DEL,  _______, _______,          _______, _______, _______, _______, _______
+    ),
+[CURS] = KEYMAP(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, KC_WH_U, _______, _______, _______, _______,          _______, _______, K_PRVWD, KC_UP,   K_NXTWD, _______, _______,
+  _______, KC_LCTL, KC_WH_D, KC_LSFT, _______, _______, _______,          _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL,  _______,
+  _______, UNDO,    CUT,     COPY,    PASTE,   _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND,  _______, _______,
+  _______, _______, _______, _______,                   _______, _______, _______,          _______, _______, _______, _______, _______
+    )
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_TAP_KEY(CURS, KC_BSPC),
+    [1] = ACTION_LAYER_TAP_KEY(SYMB, KC_SPACE),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/katana60/keymaps/colemak/readme.md

@@ -0,0 +1,5 @@
+# The colemak keymap for katana60
+
+Same as the default layout, but with default Colemal layout.
+
+# TODO: references to extend layer and symbol layers

keyboards/katana60/keymaps/default/config.h

@@ -0,0 +1,24 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/katana60/keymaps/default/keymap.c

@@ -0,0 +1,106 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "katana60.h"
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Windows based definitions.
+#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer
+#define K_PRVWD LCTL(KC_LEFT)      // Previous word
+#define K_NXTWD LCTL(KC_RIGHT)     // Next word
+#define K_LSTRT KC_HOME            // Start of line
+#define K_LEND  KC_END             // End of line
+#define UNDO    LCTL(KC_Z)         // UNDO
+#define CUT     LCTL(KC_X)         // CUT
+#define COPY    LCTL(KC_C)         // COPY
+#define PASTE   LCTL(KC_V)         // PASTE
+
+
+#define BASE 0 // Default
+#define NUMB 1 // Numbers
+#define SYMB 2 // Symbols
+#define CURS 3 // Text Editing
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = KEYMAP( /* Base */
+  KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    DF(1),   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_PLUS,
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC,          KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+  MO(3),   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME,          KC_PGUP, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_DEL,  KC_PGDN, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+  MO(2),   KC_LCTL, KC_LGUI, KC_LALT,                   KC_BSPC, KC_ENT,  K_SPCFN,          KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT,MO(2)
+    ),
+[NUMB] = KEYMAP(
+  _______, _______, _______, _______, _______, _______, _______, DF(0),   KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______, _______,
+  _______, _______, _______, KC_MS_U, _______, _______, _______,          KC_7,    KC_8,    KC_9,    KC_PPLS, _______, _______, _______,
+  _______, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______,          KC_4,    KC_5,    KC_6,    KC_PPLS, _______, _______, _______,
+  _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, KC_1,    KC_2,    KC_3,    KC_PENT, _______, _______, _______,
+  _______, _______, _______, _______,                   KC_BTN1, _______, KC_P0,            KC_PDOT, KC_PENT, _______, _______, _______
+    ),
+[SYMB] = KEYMAP(
+  RESET,   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______,          _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_VOLD,          KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+  _______, KC_PLUS, KC_MINS, KC_EQL,  KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______,
+  _______, _______, _______, _______,                   KC_DEL,  _______, _______,          _______, _______, _______, _______, _______
+    ),
+[CURS] = KEYMAP(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, KC_WH_U, _______, _______, _______, _______,          _______, _______, K_PRVWD, KC_UP,   K_NXTWD, _______, _______,
+  _______, KC_LCTL, KC_WH_D, KC_LSFT, _______, _______, _______,          _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL,  _______,
+  _______, UNDO,    CUT,     COPY,    PASTE,   _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND,  _______, _______,
+  _______, _______, _______, _______,                   _______, _______, _______,          _______, _______, _______, _______, _______
+    )
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_TAP_KEY(CURS, KC_BSPC),
+    [1] = ACTION_LAYER_TAP_KEY(SYMB, KC_SPACE),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/katana60/keymaps/default/readme.md

@@ -0,0 +1,7 @@
+# The default keymap for katana60
+
+This layout takes my own personal layout (in development at the Colemak forum) and remaps the keys and shortcuts for Windows (I'm a MacOS user).  
+The testing was comducted on my Windows gaming PC, though it was not exhaustive, all the many layers and useful navigation shortcuts worked fine.
+
+# TODO: references to extend layer and symbol layers
+# TODO: more information

keyboards/katana60/keymaps/rominronin/config.h

@@ -0,0 +1,24 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif

keyboards/katana60/keymaps/rominronin/keymap.c

@@ -0,0 +1,106 @@
+/* Copyright 2017 Baris Tosun
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "katana60.h"
+
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// MacOS based definitions.
+#define K_SPCFN LT(SYMB, KC_SPACE) // Tap for space, hold for symbols layer
+#define K_PRVWD LALT(KC_LEFT)      // Previous word
+#define K_NXTWD LALT(KC_RIGHT)     // Next word
+#define K_LSTRT LGUI(KC_LEFT)      // Start of line
+#define K_LEND  LGUI(KC_RIGHT)     // End of line
+#define UNDO    LGUI(KC_Z)         // UNDO
+#define CUT     LGUI(KC_X)         // CUT
+#define COPY    LGUI(KC_C)         // COPY
+#define PASTE   LGUI(KC_V)         // PASTE
+
+
+#define BASE 0 // Default
+#define NUMB 1 // Numbers
+#define SYMB 2 // Symbols
+#define CURS 3 // Text Editing
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[BASE] = KEYMAP( /* Base */
+  KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    DF(1),   KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_PLUS,
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_B,    KC_LBRC,          KC_RBRC, KC_J,    KC_L,    KC_U,    KC_Y,    KC_QUOT, KC_BSPC,
+  MO(3),   KC_A,    KC_R,    KC_S,    KC_T,    KC_G,    KC_HOME,          KC_PGUP, KC_M,    KC_N,    KC_E,    KC_I,    KC_O,    KC_ENT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_D,    KC_V,    KC_END,  KC_DEL,  KC_PGDN, KC_K,    KC_H,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+  MO(2),   KC_LCTL, KC_LALT, KC_LGUI,                   KC_BSPC, KC_ENT,  K_SPCFN,          KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT,MO(2)
+    ),
+[NUMB] = KEYMAP(
+  _______, _______, _______, _______, _______, _______, _______, DF(0),   KC_PSLS, KC_PAST, KC_PMNS, _______, _______, _______, _______,
+  _______, _______, _______, KC_MS_U, _______, _______, _______,          KC_7,    KC_8,    KC_9,    KC_PPLS, _______, _______, _______,
+  _______, KC_BTN2, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______,          KC_4,    KC_5,    KC_6,    KC_PPLS, _______, _______, _______,
+  _______, _______, KC_ACL0, KC_ACL1, KC_ACL2, _______, _______, _______, KC_1,    KC_2,    KC_3,    KC_PENT, _______, _______, _______,
+  _______, _______, _______, _______,                   KC_BTN1, _______, KC_P0,            KC_PDOT, KC_PENT, _______, _______, _______
+    ),
+[SYMB] = KEYMAP(
+  RESET,   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   _______, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    _______,          _______, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+  _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_VOLD,          KC_VOLU, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+  _______, KC_PLUS, KC_MINS, KC_EQL,  KC_LCBR, KC_RCBR, KC_MPRV, KC_MPLY, KC_MNXT, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______,
+  _______, _______, _______, _______,                   KC_DEL,  _______, _______,          _______, _______, _______, _______, _______
+    ),
+[CURS] = KEYMAP(
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, KC_WH_U, _______, _______, _______, _______,          _______, _______, K_PRVWD, KC_UP,   K_NXTWD, _______, _______,
+  _______, KC_LCTL, KC_WH_D, KC_LSFT, _______, _______, _______,          _______, KC_BSPC, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL,  _______,
+  _______, UNDO,    CUT,     COPY,    PASTE,   _______, _______, _______, _______, _______, K_LSTRT, _______, K_LEND,  _______, _______,
+  _______, _______, _______, _______,                   _______, _______, _______,          _______, _______, _______, _______, _______
+    )
+
+};
+
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_TAP_KEY(CURS, KC_BSPC),
+    [1] = ACTION_LAYER_TAP_KEY(SYMB, KC_SPACE),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/katana60/keymaps/rominronin/readme.md

@@ -0,0 +1,5 @@
+# RominRonin's keymap for katana60
+
+My own personal daily layout. OS keys are oriented for MacOS and the keys are in COLEMAK Mod-DH layout.
+
+# TODO: references to extend layer and symbol layers

keyboards/katana60/readme.md

@@ -0,0 +1,17 @@
+# Katana60
+
+![Katana60](https://i.imgur.com/xVkODOu.jpg)
+
+A 60% keyboard with a symmetrical staggered layout, sold by CandyKeys.com.
+
+Keyboard Maintainer: [Baris Tosun](https://github.com/rominronin)  
+Hardware Supported: Katana60 PCB v1, Teensy 2.0  
+Hardware Availability: [CandyKeys.com](https://CandyKeys.com)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make katana60:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+There is also ongoing discussion for the extend layer, at the [Colemak Forum](https://forum.colemak.com/topic/2327-developing-an-extend-layer-for-the-katana60/)

keyboards/katana60/rules.mk

@@ -0,0 +1,68 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches

keyboards/lets_split/rev1/config.h

@@ -39,9 +39,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
 // #define MATRIX_COL_PINS { B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
 
-
-#define CATERINA_BOOTLOADER
-
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 

keyboards/lets_split/rev1/rev1.c

@@ -1,17 +1,7 @@
 #include "lets_split.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
-
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -23,10 +13,3 @@ void matrix_init_kb(void) {
 	matrix_init_user();
 };
 
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/lets_split/rev2/config.h

@@ -39,8 +39,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
 // #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
 
-#define CATERINA_BOOTLOADER
-
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 

keyboards/lets_split/rev2/rev2.c

@@ -1,9 +1,5 @@
 #include "lets_split.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
 
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
@@ -14,11 +10,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -30,10 +21,3 @@ void matrix_init_kb(void) {
 	matrix_init_user();
 };
 
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/lets_split/rules.mk

@@ -40,18 +40,15 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically

keyboards/lets_split/sockets/config.h

@@ -39,8 +39,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F7, D7, B3, B2, B6}
 // #define MATRIX_COL_PINS { B6, B2, B3, C6, F7, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
 
-#define CATERINA_BOOTLOADER
-
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 

keyboards/lets_split/sockets/sockets.c

@@ -1,9 +1,5 @@
 #include "lets_split.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
 
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
@@ -14,11 +10,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -29,11 +20,3 @@ void matrix_init_kb(void) {
 
 	matrix_init_user();
 };
-
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/levinson/rev1/config.h

@@ -38,8 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { D7, E6, B4, B5 }
 #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, F4 }
 
-#define CATERINA_BOOTLOADER
-
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 

keyboards/levinson/rev1/rev1.c

@@ -1,9 +1,5 @@
 #include "levinson.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
 
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
@@ -14,11 +10,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -30,10 +21,3 @@ void matrix_init_kb(void) {
 	matrix_init_user();
 };
 
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/levinson/rev2/config.h

@@ -38,9 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { D4, D7, E6, B4 }
 #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
 
-
-#define CATERINA_BOOTLOADER
-
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 

keyboards/levinson/rev2/rev2.c

@@ -1,10 +1,5 @@
 #include "levinson.h"
 
-#ifdef AUDIO_ENABLE
-    float tone_startup[][2] = SONG(STARTUP_SOUND);
-    float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
-#endif
-
 #ifdef SSD1306OLED
 void led_set_kb(uint8_t usb_led) {
     // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
@@ -14,11 +9,6 @@ void led_set_kb(uint8_t usb_led) {
 
 void matrix_init_kb(void) {
 
-    #ifdef AUDIO_ENABLE
-        _delay_ms(20); // gets rid of tick
-        PLAY_SONG(tone_startup);
-    #endif
-
     // // green led on
     // DDRD |= (1<<5);
     // PORTD &= ~(1<<5);
@@ -30,10 +20,3 @@ void matrix_init_kb(void) {
 	matrix_init_user();
 };
 
-void shutdown_user(void) {
-    #ifdef AUDIO_ENABLE
-        PLAY_SONG(tone_goodbye);
-	_delay_ms(150);
-	stop_all_notes();
-    #endif
-}

keyboards/levinson/rules.mk

@@ -40,18 +40,15 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically

keyboards/mechmini/config.h

@@ -35,7 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN E2
 
 #define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
 
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/mechmini/rules.mk

@@ -24,6 +24,12 @@ NO_SUSPEND_POWER_DOWN = yes
 # processor frequency
 F_CPU = 12000000
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
 # build options
 BOOTMAGIC_ENABLE = yes
 MOUSEKEY_ENABLE = yes
@@ -35,7 +41,6 @@ RGBLIGHT_ENABLE = yes
 RGBLIGHT_CUSTOM_DRIVER = yes
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
 
 # custom matrix setup
 CUSTOM_MATRIX = yes