Merge b4e30d3929 into d639bd2021

Check for Pro Micro serial port automatically

keyboards/lets_split/rules.mk

@@ -76,10 +76,12 @@ CUSTOM_MATRIX = yes
 
 avrdude: build
 	ls /dev/tty* > /tmp/1; \
-	echo "Reset your Pro Micro then hit any key to continue..."; \
+	echo "Reset your Pro Micro now"; \
-	read -n 1 -s; \
+	while [[ -z $$USB ]]; do \
-	ls /dev/tty* > /tmp/2; \
+	  sleep 1; \
-	USB=`diff /tmp/1 /tmp/2 | grep '>' | sed -e 's/> //'`; \
+	  ls /dev/tty* > /tmp/2; \
+	  USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
+	done; \
 	avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
 
 .PHONY: avrdude

quantum/quantum.c

@@ -594,34 +594,45 @@ static const uint8_t backlight_pin = BACKLIGHT_PIN;
 #  define COM1x1 COM1A1
 #  define OCR1x  OCR1A
 #else
-#  error "Backlight pin not supported - use B5, B6, or B7"
+#  define NO_BACKLIGHT_CLOCK
+#endif
+
+#ifndef BACKLIGHT_ON_STATE
+#define BACKLIGHT_ON_STATE 0
 #endif
 
 __attribute__ ((weak))
 void backlight_init_ports(void)
 {
 
-  // Setup backlight pin as output and output low.
+  // Setup backlight pin as output and output to on state.
   // DDRx |= n
   _SFR_IO8((backlight_pin >> 4) + 1) |= _BV(backlight_pin & 0xF);
-  // PORTx &= ~n
+  #if BACKLIGHT_ON_STATE == 0
-  _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+    // PORTx &= ~n
+    _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+  #else
+    // PORTx |= n
+    _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF);
+  #endif
 
-  // Use full 16-bit resolution.
+  #ifndef NO_BACKLIGHT_CLOCK
-  ICR1 = 0xFFFF;
+    // Use full 16-bit resolution.
+    ICR1 = 0xFFFF;
 
-  // I could write a wall of text here to explain... but TL;DW
+    // I could write a wall of text here to explain... but TL;DW
-  // Go read the ATmega32u4 datasheet.
+    // Go read the ATmega32u4 datasheet.
-  // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+    // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
 
-  // Pin PB7 = OCR1C (Timer 1, Channel C)
+    // Pin PB7 = OCR1C (Timer 1, Channel C)
-  // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+    // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
-  // (i.e. start high, go low when counter matches.)
+    // (i.e. start high, go low when counter matches.)
-  // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+    // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
-  // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+    // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
 
-  TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
+    TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
-  TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+  #endif
 
   backlight_init();
   #ifdef BACKLIGHT_BREATHING
@@ -633,24 +644,43 @@ __attribute__ ((weak))
 void backlight_set(uint8_t level)
 {
   // Prevent backlight blink on lowest level
-  // PORTx &= ~n
+  #if BACKLIGHT_ON_STATE == 0
-  _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+    // PORTx &= ~n
+    _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+  #else
+    // PORTx |= n
+    _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF);
+  #endif
 
   if ( level == 0 ) {
-    // Turn off PWM control on backlight pin, revert to output low.
+    #ifndef NO_BACKLIGHT_CLOCK
-    TCCR1A &= ~(_BV(COM1x1));
+      // Turn off PWM control on backlight pin, revert to output low.
-    OCR1x = 0x0;
+      TCCR1A &= ~(_BV(COM1x1));
-  } else if ( level == BACKLIGHT_LEVELS ) {
+      OCR1x = 0x0;
-    // Turn on PWM control of backlight pin
+    #else
-    TCCR1A |= _BV(COM1x1);
+      #if BACKLIGHT_ON_STATE == 0
-    // Set the brightness
+        // PORTx |= n
-    OCR1x = 0xFFFF;
+        _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF);
-  } else {
+      #else
-    // Turn on PWM control of backlight pin
+        // PORTx &= ~n
-    TCCR1A |= _BV(COM1x1);
+        _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
-    // Set the brightness
+      #endif
-    OCR1x = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
+    #endif
-  }
+  } 
+  #ifndef NO_BACKLIGHT_CLOCK
+    else if ( level == BACKLIGHT_LEVELS ) {
+      // Turn on PWM control of backlight pin
+      TCCR1A |= _BV(COM1x1);
+      // Set the brightness
+      OCR1x = 0xFFFF;
+    } 
+    else {
+      // Turn on PWM control of backlight pin
+      TCCR1A |= _BV(COM1x1);
+      // Set the brightness
+      OCR1x = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
+    }
+  #endif
 
   #ifdef BACKLIGHT_BREATHING
     breathing_intensity_default();

quantum/rgblight.c

@@ -66,6 +66,8 @@ __attribute__ ((weak))
 const uint8_t RGBLED_SNAKE_INTERVALS[] PROGMEM = {100, 50, 20};
 __attribute__ ((weak))
 const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {100, 50, 20};
+__attribute__ ((weak))
+const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
 
 rgblight_config_t rgblight_config;
 rgblight_config_t inmem_config;
@@ -219,6 +221,14 @@ void rgblight_step(void) {
   }
   rgblight_mode(mode);
 }
+void rgblight_step_reverse(void) {
+  uint8_t mode = 0;
+  mode = rgblight_config.mode - 1;
+  if (mode < 1) {
+    mode = RGBLIGHT_MODES;
+  }
+  rgblight_mode(mode);
+}
 
 void rgblight_mode(uint8_t mode) {
   if (!rgblight_config.enable) {
@@ -237,7 +247,7 @@ void rgblight_mode(uint8_t mode) {
     #ifdef RGBLIGHT_ANIMATIONS
       rgblight_timer_disable();
     #endif
-  } else if (rgblight_config.mode >= 2 && rgblight_config.mode <= 23) {
+  } else if (rgblight_config.mode >= 2 && rgblight_config.mode <= 24) {
     // MODE 2-5, breathing
     // MODE 6-8, rainbow mood
     // MODE 9-14, rainbow swirl
@@ -247,6 +257,12 @@ void rgblight_mode(uint8_t mode) {
     #ifdef RGBLIGHT_ANIMATIONS
       rgblight_timer_enable();
     #endif
+  } else if (rgblight_config.mode >= 25 && rgblight_config.mode <= 34) {
+    // MODE 25-34, static gradient
+
+    #ifdef RGBLIGHT_ANIMATIONS
+      rgblight_timer_disable();
+    #endif
   }
   rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
 }
@@ -350,6 +366,17 @@ void rgblight_sethsv(uint16_t hue, uint8_t sat, uint8_t val) {
       } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 14) {
         // rainbow mood and rainbow swirl, ignore the change of hue
         hue = rgblight_config.hue;
+      } else if (rgblight_config.mode >= 25 && rgblight_config.mode <= 34) {
+        // static gradient
+        uint16_t _hue;
+        int8_t direction = ((rgblight_config.mode - 25) % 2) ? -1 : 1;
+        uint16_t range = pgm_read_word(&RGBLED_GRADIENT_RANGES[(rgblight_config.mode - 25) / 2]);
+        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+          _hue = (range / RGBLED_NUM * i * direction + hue + 360) % 360;
+          dprintf("rgblight rainbow set hsv: %u,%u,%d,%u\n", i, _hue, direction, range);
+          sethsv(_hue, sat, val, (LED_TYPE *)&led[i]);
+        }
+        rgblight_set();
       }
     }
     rgblight_config.hue = hue;
@@ -450,7 +477,7 @@ void rgblight_task(void) {
     } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) {
       // mode = 21 to 23, knight mode
       rgblight_effect_knight(rgblight_config.mode - 21);
-    } else {
+    } else if (rgblight_config.mode == 24) {
       // mode = 24, christmas mode
       rgblight_effect_christmas();
     }
@@ -604,13 +631,13 @@ void rgblight_effect_christmas(void) {
   static uint16_t last_timer = 0;
   uint16_t hue;
   uint8_t i;
-  if (timer_elapsed(last_timer) < 1000) {
+  if (timer_elapsed(last_timer) < RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL) {
     return;
   }
   last_timer = timer_read();
   current_offset = (current_offset + 1) % 2;
   for (i = 0; i < RGBLED_NUM; i++) {
-    hue = 0 + ((RGBLED_NUM * (i + current_offset)) % 2) * 80;
+    hue = 0 + ((i/RGBLIGHT_EFFECT_CHRISTMAS_STEP + current_offset) % 2) * 120;
     sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]);
   }
   rgblight_set();

quantum/rgblight.h

@@ -2,7 +2,7 @@
 #define RGBLIGHT_H
 
 #ifdef RGBLIGHT_ANIMATIONS
-	#define RGBLIGHT_MODES 24
+	#define RGBLIGHT_MODES 34
 #else
 	#define RGBLIGHT_MODES 1
 #endif
@@ -22,6 +22,14 @@
 #define RGBLIGHT_EFFECT_DUALKNIGHT_LENGTH 4
 #endif
 
+#ifndef RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL
+#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 1000
+#endif
+
+#ifndef RGBLIGHT_EFFECT_CHRISTMAS_STEP
+#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 2
+#endif
+
 #ifndef RGBLIGHT_HUE_STEP
 #define RGBLIGHT_HUE_STEP 10
 #endif
@@ -65,6 +73,7 @@ void rgblight_decrease(void);
 void rgblight_toggle(void);
 void rgblight_enable(void);
 void rgblight_step(void);
+void rgblight_step_reverse(void);
 void rgblight_mode(uint8_t mode);
 void rgblight_set(void);
 void rgblight_update_dword(uint32_t dword);

tmk_core/protocol/vusb/vusb.c

@@ -280,7 +280,7 @@ const PROGMEM uchar keyboard_hid_report[] = {
     0x95, 0x06,          //   Report Count (6),
     0x75, 0x08,          //   Report Size (8),
     0x15, 0x00,          //   Logical Minimum (0),
-    0x25, 0xFF, 0x00,    //   Logical Maximum(255),
+    0x26, 0xFF, 0x00,    //   Logical Maximum(255),
     0x05, 0x07,          //   Usage Page (Key Codes),
     0x19, 0x00,          //   Usage Minimum (0),
     0x29, 0xFF,          //   Usage Maximum (255),
@@ -350,7 +350,7 @@ const PROGMEM uchar mouse_hid_report[] = {
     0xa1, 0x01,                    // COLLECTION (Application)
     0x85, REPORT_ID_SYSTEM,        //   REPORT_ID (2)
     0x15, 0x01,                    //   LOGICAL_MINIMUM (0x1)
-    0x25, 0xb7, 0x00,              //   LOGICAL_MAXIMUM (0xb7)
+    0x26, 0xb7, 0x00,              //   LOGICAL_MAXIMUM (0xb7)
     0x19, 0x01,                    //   USAGE_MINIMUM (0x1)
     0x29, 0xb7,                    //   USAGE_MAXIMUM (0xb7)
     0x75, 0x10,                    //   REPORT_SIZE (16)