[Core] Fix Sensor driver code (#15484)

Co-authored-by: Drashna Jaelre <[email protected]>
Co-authored-by: Ryan <[email protected]>

data/templates/avr/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

docs/_langs.md

@@ -1,6 +1,6 @@
 - Translations
   - [:uk: English](/)
-  - [:cn: 中文](/zh-cn/)
+  - [:cn: 简体中文](/zh-cn/)
   - [:es: Español](/es/)
   - [:fr: Français](/fr-fr/)
   - [:israel: עברית](/he-il/)

docs/cli_commands.md

@@ -481,5 +481,20 @@ This command runs the python test suite. If you make changes to python code you
 **Usage**:
 
 ```
-qmk pytest
+qmk pytest [-t TEST]
 ```
+
+**Examples**:
+
+Run entire test suite:
+
+    qmk pytest
+
+Run test group:
+
+    qmk pytest -t qmk.tests.test_cli_commands
+
+Run single test:
+
+    qmk pytest -t qmk.tests.test_cli_commands.test_c2json
+    qmk pytest -t qmk.tests.test_qmk_path

docs/compatible_microcontrollers.md

@@ -37,8 +37,8 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s
  * [STM32L422](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html)
  * [STM32L433](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x3.html)
  * [STM32L443](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x3.html)
- 
+
- ### WestBerryTech (WB32)
+### WestBerryTech (WB32)
 
  * [WB32F3G71xx](http://www.westberrytech.com)
 
@@ -57,4 +57,4 @@ There is limited support for one of Atmel's ATSAM microcontrollers, that being t
 
 ### GigaDevice
 
-[ChibiOS-Contrib](https://github.com/ChibiOS/ChibiOS-Contrib) has support for the GigaDevice [GD32VF103 series](https://www.gigadevice.com/products/microcontrollers/gd32/risc-v/mainstream-line/gd32vf103-series/) microcontrollers and provides configurations for the [SiPeed Longan Nano](https://longan.sipeed.com/en/) development board that uses this microcontroller. It is largely pin and feature compatible with STM32F103 and STM32F303 microcontrollers.
+[ChibiOS-Contrib](https://github.com/ChibiOS/ChibiOS-Contrib) has support for the GigaDevice [GD32VF103 series](https://www.gigadevice.com/products/microcontrollers/gd32/risc-v/mainstream-line/gd32vf103-series/) microcontrollers and provides configurations for the [SiPeed Longan Nano](https://longan.sipeed.com/en/) development board that uses this microcontroller. It is largely pin and feature compatible with STM32F103 and STM32F303 microcontrollers.

docs/feature_bluetooth.md

@@ -16,7 +16,7 @@ Not Supported Yet but possible:
 * HM-13 based boards
 
 ### Adafruit BLE SPI Friend
-Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit SPI Friend. It's a Nordic nRF5182 based chip running Adafruit's custom firmware. Data is transmitted via Adafruit's SDEP over Hardware SPI. The [Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) is supported as it's an AVR mcu connected via SPI to the Nordic BLE chip with Adafruit firmware. If Building a custom board with the SPI friend it would be easiest to just use the pin selection that the 32u4 feather uses but you can change the pins in the config.h options with the following defines:
+Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit SPI Friend. It's a Nordic nRF51822 based chip running Adafruit's custom firmware. Data is transmitted via Adafruit's SDEP over Hardware SPI. The [Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) is supported as it's an AVR mcu connected via SPI to the Nordic BLE chip with Adafruit firmware. If Building a custom board with the SPI friend it would be easiest to just use the pin selection that the 32u4 feather uses but you can change the pins in the config.h options with the following defines:
 * `#define ADAFRUIT_BLE_RST_PIN D4`
 * `#define ADAFRUIT_BLE_CS_PIN  B4`
 * `#define ADAFRUIT_BLE_IRQ_PIN E6`

docs/feature_pointing_device.md

@@ -150,6 +150,7 @@ The PMW 3360 is an SPI driven optical sensor, that uses a built in IR LED for su
 |`PMW3360_SPI_LSBFIRST`       | (Optional) Sets the Least/Most Significant Byte First setting for SPI.                     | `false`       |
 |`PMW3360_SPI_MODE`           | (Optional) Sets the SPI Mode for the sensor.                                               | `3`           |
 |`PMW3360_SPI_DIVISOR`        | (Optional) Sets the SPI Divisor used for SPI communication.                                | _varies_      |
+|`PMW3360_LIFTOFF_DISTANCE`   | (Optional) Sets the lift off distance at run time                                          | `0x02`        |
 |`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 30 degrees directly in the sensor. | `0`           |
 
 The CPI range is 100-12000, in increments of 100. Defaults to 1600 CPI.

drivers/sensors/cirque_pinnacle_spi.c

@@ -15,7 +15,7 @@ extern bool touchpad_init;
 void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) {
     uint8_t cmdByte = READ_MASK | address;  // Form the READ command byte
     if (touchpad_init) {
-        if (spi_start(CIRQUE_PINNACLE_SPI_CS_PIN, CIRQUE_TRACKPAD_SPI_LSBFIRST, CIRQUE_PINNACLE_SPI_MODE, CIRQUE_PINNACLE_SPI_DIVISOR)) {
+        if (spi_start(CIRQUE_PINNACLE_SPI_CS_PIN, CIRQUE_PINNACLE_SPI_LSBFIRST, CIRQUE_PINNACLE_SPI_MODE, CIRQUE_PINNACLE_SPI_DIVISOR)) {
             spi_write(cmdByte);
             spi_read();  // filler
             spi_read();  // filler
@@ -27,7 +27,6 @@ void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) {
             dprintf("error right touchpad\n");
 #endif
             touchpad_init = false;
-            j
         }
         spi_stop();
     }
@@ -38,7 +37,7 @@ void RAP_Write(uint8_t address, uint8_t data) {
     uint8_t cmdByte = WRITE_MASK | address;  // Form the WRITE command byte
 
     if (touchpad_init) {
-        if (spi_start(CIRQUE_PINNACLE_SPI_CS_PIN, CIRQUE_TRACKPAD_SPI_LSBFIRST, CIRQUE_PINNACLE_SPI_MODE, CIRQUE_PINNACLE_SPI_DIVISOR)) {
+        if (spi_start(CIRQUE_PINNACLE_SPI_CS_PIN, CIRQUE_PINNACLE_SPI_LSBFIRST, CIRQUE_PINNACLE_SPI_MODE, CIRQUE_PINNACLE_SPI_DIVISOR)) {
             spi_write(cmdByte);
             spi_write(data);
         } else {

drivers/sensors/pmw3360.c

@@ -143,7 +143,7 @@ void pmw3360_set_cpi(uint16_t cpi) {
 
 uint16_t pmw3360_get_cpi(void) {
     uint8_t cpival = spi_read_adv(REG_Config1);
-    return (uint16_t)(cpival & 0xFF) * 100;
+    return (uint16_t)((cpival + 1) & 0xFF) * 100;
 }
 
 bool pmw3360_init(void) {
@@ -186,6 +186,8 @@ bool pmw3360_init(void) {
 
     spi_write_adv(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -30, 30));
 
+    spi_write_adv(REG_Lift_Config, PMW3360_LIFTOFF_DISTANCE);
+
     bool init_success = pmw3360_check_signature();
 
     writePinLow(PMW3360_CS_PIN);

drivers/sensors/pmw3360.h

@@ -46,6 +46,10 @@
 #    endif
 #endif
 
+#ifndef PMW3360_LIFTOFF_DISTANCE
+#    define PMW3360_LIFTOFF_DISTANCE 0x02
+#endif
+
 #ifndef ROTATIONAL_TRANSFORM_ANGLE
 #    define ROTATIONAL_TRANSFORM_ANGLE 0x00
 #endif

keyboards/0_sixty/rules.mk

@@ -11,8 +11,7 @@ BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/0xc7/61key/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no       # Mouse keys
 EXTRAKEY_ENABLE = no       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/0xcb/1337/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes 	    # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no	        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/0xcb/static/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no	        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/10bleoledhub/rules.mk

@@ -15,8 +15,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/1upkeyboards/1up60hse/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/1upkeyboards/1up60hte/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/1upkeyboards/1up60rgb/rules.mk

@@ -5,14 +5,14 @@ MCU = atmega32u4
 BOOTLOADER = atmel-dfu
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control
 CONSOLE_ENABLE = no	# Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes

keyboards/1upkeyboards/super16/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no       # Enable keyboard RGB underglow
 RGB_MATRIX_ENABLE = yes

keyboards/1upkeyboards/sweet16/keymaps/switchtester/rules.mk

@@ -1,12 +1,9 @@
-# Build Options
-#   comment out to disable the options.
-#
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = no   # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes  # Audio control and System control(+450)
 CONSOLE_ENABLE = yes   # Console for debug(+400)
 COMMAND_ENABLE = yes   # Commands for debug and configuration
-NKRO_ENABLE = no       # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no
 RGBLIGHT_ENABLE = no
 
 SRC += switches.c

keyboards/1upkeyboards/sweet16/rules.mk

@@ -6,6 +6,6 @@ MOUSEKEY_ENABLE = yes  # Mouse keys
 EXTRAKEY_ENABLE = yes  # Audio control and System control
 CONSOLE_ENABLE = no    # Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
-NKRO_ENABLE = yes      # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = no

keyboards/2key2crawl/rules.mk

@@ -5,14 +5,14 @@ MCU = atmega32u2
 BOOTLOADER = atmel-dfu
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = no	# Mouse keys
 EXTRAKEY_ENABLE = no	# Audio control and System control
 CONSOLE_ENABLE = yes	# Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
-NKRO_ENABLE = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no  # [Crawlpad] Custom backlighting code is used, so this should not be enabled
 AUDIO_ENABLE = no # [Crawlpad] This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
 RGBLIGHT_ENABLE = no # [Crawlpad] This can be enabled if a ws2812 strip is connected to the expansion port.

keyboards/30wer/keymaps/default/keymap.c

@@ -2,16 +2,16 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-[0] = LAYOUT( \
+[0] = LAYOUT(
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_BSPC,
-  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
-           KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, LT(1, KC_SPC) \
+           KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, LT(1, KC_SPC)
 ),
 
-[1] = LAYOUT( \
+[1] = LAYOUT(
-  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_UP,   KC_DEL, \
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_UP,   KC_DEL,
-  _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, \
+  _______, _______, _______, _______, RESET,   _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______,
-           KC_LALT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______ \
+           KC_LALT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______
 ),
 
 };

keyboards/30wer/rules.mk

@@ -12,7 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
 RGBLIGHT_ENABLE = no 		# Enable WS2812 RGB underlight.

keyboards/3keyecosystem/2key2/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 RGB_MATRIX_ENABLE = yes		# Enable RGB matrix

keyboards/3w6/rev1/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/3w6/rev2/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/25/keymaps/default/keymap.c

@@ -42,11 +42,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * `---------------------------------------------------------------------'
    */
   [_QWERTY] = LAYOUT_split(
-    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    \
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
-    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    \
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
-    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_BSPC, \
+    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_BSPC,
-    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_ENT,  \
+    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_ENT,
-    KC_LCTL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_LSFT, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+    KC_LCTL, KC_LGUI, KC_LALT, LOWER,   KC_SPC,  KC_LSFT, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
   ),
 
   /* Lower
@@ -62,11 +62,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |      |      |      |      |      |      | Home | PgDn | PgUp | End  |
    * `---------------------------------------------------------------------'
    */
-  [_LOWER] = LAYOUT_split( \
+  [_LOWER] = LAYOUT_split(
-    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_GRV, KC_SLSH, KC_UNDS, KC_PLUS, \
+    KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_GRV, KC_SLSH, KC_UNDS, KC_PLUS,
-    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TILD, KC_LBRC, KC_RBRC, KC_PIPE, \
+    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TILD, KC_LBRC, KC_RBRC, KC_PIPE,
-    KC_ESC,  _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_DEL,  \
+    KC_ESC,  _______, _______, _______, _______, _______, _______, KC_SCLN, KC_QUOT, KC_DEL,
-    KC_TAB,  _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+    KC_TAB,  _______, _______, _______, _______, _______, _______, _______, _______, _______,
-    _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END   \
+    _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
   ),
 };

keyboards/40percentclub/25/keymaps/macro/keymap.c

@@ -17,10 +17,10 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_macro(
-    KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,  \
+    KC_ESC,   KC_1,    KC_2,    KC_3,    KC_4,
-    KC_GRV,   KC_Q,    KC_W,    KC_E,    KC_R,  \
+    KC_GRV,   KC_Q,    KC_W,    KC_E,    KC_R,
-    KC_TAB,   KC_A,    KC_S,    KC_D,    KC_F,  \
+    KC_TAB,   KC_A,    KC_S,    KC_D,    KC_F,
-    KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,  \
+    KC_LSFT,  KC_Z,    KC_X,    KC_C,    KC_V,
-    KC_LCTL,  KC_LGUI, KC_LALT, KC_SPC,  KC_SPC \
+    KC_LCTL,  KC_LGUI, KC_LALT, KC_SPC,  KC_SPC
   ),
 };

keyboards/40percentclub/25/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/4pack/keymaps/default/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2019 Arda Kilicdagi
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/40percentclub/4pack/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/4x4/keymaps/default/config.h

@@ -1,5 +0,0 @@
-
-
-#pragma once
-
-// place overrides here

keyboards/40percentclub/4x4/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
 

keyboards/40percentclub/5x5/keymaps/default/config.h

@@ -1,5 +0,0 @@
-
-
-#pragma once
-
-// place overrides here

keyboards/40percentclub/5x5/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output
 

keyboards/40percentclub/6lit/keymaps/default/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2018
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/40percentclub/6lit/keymaps/default/keymap.c

@@ -17,7 +17,7 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_split( /* Base */
-    KC_F13,   KC_F14,   KC_F15,   KC_F16,   KC_F17,   KC_F18, \
+    KC_F13,   KC_F14,   KC_F15,   KC_F16,   KC_F17,   KC_F18,
-    KC_F19,   KC_F20,   KC_F21,   KC_F22,   KC_F23,   KC_F24  \
+    KC_F19,   KC_F20,   KC_F21,   KC_F22,   KC_F23,   KC_F24
   ),
 };

keyboards/40percentclub/6lit/keymaps/macro/keymap.c

@@ -17,7 +17,7 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_macro( /* Base */
-    KC_F19,   KC_F20,   KC_F21, \
+    KC_F19,   KC_F20,   KC_F21,
-    KC_F22,   KC_F23,   KC_F24  \
+    KC_F22,   KC_F23,   KC_F24
   ),
 };

keyboards/40percentclub/6lit/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/foobar/keymaps/macro/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2018
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/40percentclub/foobar/keymaps/macro/keymap.c

@@ -17,8 +17,8 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_macro( /* Base */
-    KC_F13,   KC_F14,   KC_F15,   KC_F16,   KC_INT1, \
+    KC_F13,   KC_F14,   KC_F15,   KC_F16,   KC_INT1,
-    KC_F17,   KC_F18,   KC_F19,   KC_F20,   KC_INT2, \
+    KC_F17,   KC_F18,   KC_F19,   KC_F20,   KC_INT2,
-    KC_F21,   KC_F22,   KC_F23,   KC_F14,   KC_INT5  \
+    KC_F21,   KC_F22,   KC_F23,   KC_F14,   KC_INT5
   ),
 };

keyboards/40percentclub/foobar/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/gherkin/rules.mk

@@ -5,14 +5,14 @@ MCU = atmega32u4
 BOOTLOADER = caterina
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = yes	  # Mouse keys
 EXTRAKEY_ENABLE = yes	  # Audio control and System control
 CONSOLE_ENABLE = no	    # Console for debug
 COMMAND_ENABLE = no     # Commands for debug and configuration
-NKRO_ENABLE = yes		    # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = no

keyboards/40percentclub/half_n_half/keymaps/default/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2019 REPLACE_WITH_YOUR_NAME
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/40percentclub/half_n_half/keymaps/default/keymap.c

@@ -23,9 +23,9 @@ enum custom_keycodes {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT( /* Base */
-    KC_GESC, KC_Q, KC_W, KC_E, KC_R,   KC_T, KC_LCTL, KC_RCTL, KC_Y, KC_U,   KC_I,    KC_O,   KC_P,    KC_BSPC, \
+    KC_GESC, KC_Q, KC_W, KC_E, KC_R,   KC_T, KC_LCTL, KC_RCTL, KC_Y, KC_U,   KC_I,    KC_O,   KC_P,    KC_BSPC,
-    KC_TAB,  KC_A, KC_S, KC_D, KC_F,   KC_G, KC_LALT, KC_RALT, KC_H, KC_J,   KC_K,    KC_L,   KC_SCLN, KC_QUOT, \
+    KC_TAB,  KC_A, KC_S, KC_D, KC_F,   KC_G, KC_LALT, KC_RALT, KC_H, KC_J,   KC_K,    KC_L,   KC_SCLN, KC_QUOT,
-    KC_LSFT, KC_Z, KC_X, KC_C, KC_V,   KC_B, KC_LGUI, KC_APP,  KC_N, KC_M,   KC_COMM, KC_DOT, KC_SLSH, KC_ENT,  \
+    KC_LSFT, KC_Z, KC_X, KC_C, KC_V,   KC_B, KC_LGUI, KC_APP,  KC_N, KC_M,   KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
                                KC_SPC,                               KC_SPC
   ),
 };

keyboards/40percentclub/half_n_half/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/i75/keymaps/default/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2018
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/40percentclub/i75/keymaps/default/keymap.c

@@ -22,12 +22,12 @@ enum custom_keycodes {
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [0] = LAYOUT_ortho_5x15( \
+ [0] = LAYOUT_ortho_5x15(
-    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,  \
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
-    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL,  \
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL,
-    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP, \
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP,
-    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN, \
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN,
-    KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, KC_RCTL, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  \
+    KC_LCTL, KC_LGUI, KC_LALT, KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  KC_SPC,  KC_RALT, KC_RCTL, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
   ),
 };
 

keyboards/40percentclub/i75/rules.mk

@@ -6,8 +6,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/luddite/rules.mk

@@ -5,14 +5,14 @@ MCU = atmega32u4
 BOOTLOADER = caterina
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = yes	  # Mouse keys
 EXTRAKEY_ENABLE = yes	  # Audio control and System control
 CONSOLE_ENABLE = no			# Console for debug
 COMMAND_ENABLE = no     # Commands for debug and configuration
-NKRO_ENABLE = yes				# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes

keyboards/40percentclub/mf68/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/nano/rules.mk

@@ -12,7 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
 UNICODE_ENABLE = yes        # Unicode

keyboards/40percentclub/nein/keymaps/default/keymap.c

@@ -17,13 +17,13 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [0] = LAYOUT_ortho_3x3(
-        KC_MUTE, KC_HOME, KC_MPLY, \
+        KC_MUTE, KC_HOME, KC_MPLY,
-        MO(1),   KC_UP,   KC_END, \
+        MO(1),   KC_UP,   KC_END,
-        KC_LEFT, KC_DOWN, KC_RGHT \
+        KC_LEFT, KC_DOWN, KC_RGHT
     ),
     [1] = LAYOUT_ortho_3x3(
-        RESET,   _______, KC_STOP, \
+        RESET,   _______, KC_STOP,
-        _______, _______, RGB_MOD, \
+        _______, _______, RGB_MOD,
-        KC_MPRV, _______, KC_MNXT \
+        KC_MPRV, _______, KC_MNXT
     ),
 };

keyboards/40percentclub/nein/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/nori/keymaps/default/keymap.c

@@ -34,10 +34,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_QWERTY] = LAYOUT_ortho_4x12(
-   KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+   KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-   KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+   KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+   KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
-   ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT  \
+   ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
 ),
 
 /* Colemak
@@ -51,11 +51,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_COLEMAK] = LAYOUT_ortho_4x12( \
+[_COLEMAK] = LAYOUT_ortho_4x12(
-  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC,
-  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
 ),
 
 /* Dvorak
@@ -69,11 +69,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_DVORAK] = LAYOUT_ortho_4x12( \
+[_DVORAK] = LAYOUT_ortho_4x12(
-  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC,
-  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH,
-  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT ,
-  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
 ),
 
 /* Lower
@@ -87,11 +87,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_LOWER] = LAYOUT_ortho_4x12( \
+[_LOWER] = LAYOUT_ortho_4x12(
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
 
 /* Raise
@@ -105,11 +105,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_RAISE] = LAYOUT_ortho_4x12( \
+[_RAISE] = LAYOUT_ortho_4x12(
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
 
 /* Adjust (Lower + Raise)
@@ -123,11 +123,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
-[_ADJUST] =  LAYOUT_ortho_4x12( \
+[_ADJUST] =  LAYOUT_ortho_4x12(
-  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
-  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
 )
 
 

keyboards/40percentclub/nori/keymaps/macro/keymap.c

@@ -17,9 +17,9 @@
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_ortho_4x4( /* Base */
-    KC_INT1,  KC_INT2,  KC_INT3,  KC_INT5, \
+    KC_INT1,  KC_INT2,  KC_INT3,  KC_INT5,
-    KC_F13,   KC_F14,   KC_F15,   KC_F16,  \
+    KC_F13,   KC_F14,   KC_F15,   KC_F16,
-    KC_F17,   KC_F18,   KC_F19,   KC_F20,  \
+    KC_F17,   KC_F18,   KC_F19,   KC_F20,
-    KC_F21,   KC_F22,   KC_F23,   KC_F24   \
+    KC_F21,   KC_F22,   KC_F23,   KC_F24
   ),
 };

keyboards/40percentclub/nori/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/polyandry/rules.mk

@@ -6,8 +6,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/sixpack/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/40percentclub/tomato/rules.mk

@@ -5,14 +5,14 @@ MCU = atmega32u4
 BOOTLOADER = caterina
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = yes	  # Mouse keys
 EXTRAKEY_ENABLE = yes	  # Audio control and System control
 CONSOLE_ENABLE = no			# Console for debug
 COMMAND_ENABLE = no    	# Commands for debug and configuration
-NKRO_ENABLE = yes				# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no   # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes

keyboards/40percentclub/ut47/keymaps/default/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2018 Carlos Filoteo
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/40percentclub/ut47/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
 

keyboards/45_ats/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/4by3/rules.mk

@@ -5,7 +5,7 @@ MCU = atmega32u4
 BOOTLOADER = caterina
 
 EXTRAKEY_ENABLE 	= yes
-NKRO_ENABLE 		= yes
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 CONSOLE_ENABLE		= yes
 COMMAND_ENABLE		= yes
 

keyboards/4pplet/aekiso60/rev_a/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/4pplet/bootleg/rev_a/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover 
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk

@@ -1,15 +1,18 @@
 # MCU name
 MCU = STM32F072
 
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = yes   # Mouse keys
 EXTRAKEY_ENABLE = yes   # Audio control and System control
 CONSOLE_ENABLE = yes    # Console for debug
 COMMAND_ENABLE = yes    # Commands for debug and configuration
-NKRO_ENABLE = yes       # USB Nkey Rollover
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = yes
 BACKLIGHT_DRIVER = pwm
 RGBLIGHT_ENABLE = yes

keyboards/4pplet/steezy60/rev_a/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/4pplet/waffling60/rev_a/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/4pplet/waffling60/rev_b/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/6ball/rules.mk

@@ -12,7 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
 UNICODE_ENABLE = yes        # Unicode

keyboards/7c8/framework/rules.mk

@@ -4,12 +4,15 @@ MCU = atmega328p
 # Bootloader selection
 BOOTLOADER = usbasploader
 
+# Build Options
+#   change yes to no to disable
+#
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = yes
 EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = no
 COMMAND_ENABLE = no
-NKRO_ENABLE = no
+NKRO_ENABLE = no            # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
 AUDIO_ENABLE = no

keyboards/7skb/rules.mk

@@ -12,7 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
 RGBLIGHT_ENABLE = yes       # Enable WS2812 RGB underlight. 

keyboards/7splus/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/8pack/rules.mk

@@ -5,14 +5,14 @@ MCU = atmega32u4
 BOOTLOADER = caterina
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
 MOUSEKEY_ENABLE  = no  # Mouse keys
 EXTRAKEY_ENABLE  = no  # Audio control and System control
 CONSOLE_ENABLE   = yes # Console for debug
 COMMAND_ENABLE   = yes # Commands for debug and configuration
-NKRO_ENABLE      = no  # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
 BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
 AUDIO_ENABLE     = no
 RGBLIGHT_ENABLE  = yes

keyboards/9key/keymaps/default/keymap.c

@@ -11,10 +11,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |  7/0  |   8   | 9/FN  | 7/0 = Dbl Tap 7 for 0  -  9/FN = Hold 9 for FN
  * `-----------------------'
  */
-[0] = LAYOUT( \
+[0] = LAYOUT(
-  KC_1,       KC_2,      KC_3,       \
+  KC_1,       KC_2,      KC_3,
-  KC_4,       KC_5,      KC_6,       \
+  KC_4,       KC_5,      KC_6,
-  KC_7,       KC_8,      LT(1, KC_9) \
+  KC_7,       KC_8,      LT(1, KC_9)
 ),
 
 /* LAYER 1
@@ -26,10 +26,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |  00   |   .   |       |
  * `-----------------------'
  */
-[1] = LAYOUT( \
+[1] = LAYOUT(
-  KC_ESC,   KC_PLUS, KC_MINS, \
+  KC_ESC,   KC_PLUS, KC_MINS,
-  KC_ENTER, KC_ASTR, KC_SLSH, \
+  KC_ENTER, KC_ASTR, KC_SLSH,
-  KC_0,     KC_DOT,  KC_TRNS  \
+  KC_0,     KC_DOT,  KC_TRNS
 )
 
 };

keyboards/9key/keymaps/tap_dance/keymap.c

@@ -22,10 +22,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |  7/0  |   8   | 9/FN  | 7/0 = Dbl Tap 7 for 0  -  9/FN = Hold 9 for FN
  * `-----------------------'
  */
-[0] = LAYOUT( \
+[0] = LAYOUT(
-  KC_1,       KC_2,      KC_3,       \
+  KC_1,       KC_2,      KC_3,
-  KC_4,       TD(ENT_5), KC_6,       \
+  KC_4,       TD(ENT_5), KC_6,
-  TD(ZERO_7), KC_8,      LT(1, KC_9) \
+  TD(ZERO_7), KC_8,      LT(1, KC_9)
 ),
 
 /* LAYER 1
@@ -37,10 +37,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |  00   |   .   |       |
  * `-----------------------'
  */
-[1] = LAYOUT( \
+[1] = LAYOUT(
-  KC_ESC,   KC_PLUS, KC_MINS, \
+  KC_ESC,   KC_PLUS, KC_MINS,
-  KC_BSPC,  KC_ASTR, KC_SLSH, \
+  KC_BSPC,  KC_ASTR, KC_SLSH,
-  DBL_0,    KC_DOT,  KC_TRNS  \
+  DBL_0,    KC_DOT,  KC_TRNS
 )
 
 };

keyboards/9key/rules.mk

@@ -12,7 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
 UNICODE_ENABLE = yes         # Unicode

keyboards/a_dux/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/abacus/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/absinthe/keymaps/ansi/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2020 cfbender
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/absinthe/keymaps/default/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2020 cfbender
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/absinthe/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/abstract/ellipse/keymaps/default/config.h

@@ -1,19 +0,0 @@
-/* Copyright 2019 AbstractKB
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here

keyboards/abstract/ellipse/rev1/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/acekeyboard/titan60/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/acheron/arctic/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/acheron/austin/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/acheron/elongate/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/acheron/keebspcb/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/acheron/lasgweloth/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/acheron/shark/keymaps/default/keymap.c

@@ -38,11 +38,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Ctrl | Alt  | GUI  |      |Lower | Space| Space|Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_QWERTY] = LAYOUT_ortho_4x12( \
+[_QWERTY] = LAYOUT_ortho_4x12(
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
-  KC_LCTL, KC_LALT, KC_LGUI, _______, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+  KC_LCTL, KC_LALT, KC_LGUI, _______, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
 ),
 
 /* Lower
@@ -56,11 +56,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_LOWER] = LAYOUT_ortho_4x12( \
+[_LOWER] = LAYOUT_ortho_4x12(
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  BL_TOGG, BL_INC , BL_DEC , _______, _______, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  BL_TOGG, BL_INC , BL_DEC , _______, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
 
 /* Raise
@@ -74,11 +74,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_RAISE] = LAYOUT_ortho_4x12( \
+[_RAISE] = LAYOUT_ortho_4x12(
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
 
 /* Adjust (Lower + Raise)
@@ -92,11 +92,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
-[_ADJUST] =  LAYOUT_ortho_4x12( \
+[_ADJUST] =  LAYOUT_ortho_4x12(
-  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-  _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______,\
+  _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______,
-  _______, BL_TOGG, BL_INC,  BL_DEC , _______, _______, _______, _______, _______, _______, _______, _______ \
+  _______, BL_TOGG, BL_INC,  BL_DEC , _______, _______, _______, _______, _______, _______, _______, _______
 )
 };
 

keyboards/acheron/shark/keymaps/via/keymap.c

@@ -37,11 +37,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * | Ctrl | Alt  | GUI  |      |Lower | Space| Space|Raise | Left | Down |  Up  |Right |
  * `-----------------------------------------------------------------------------------'
  */
-[_QWERTY] = LAYOUT_ortho_4x12( \
+[_QWERTY] = LAYOUT_ortho_4x12(
-  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
-  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
-  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT ,
-  KC_LCTL, KC_LALT, KC_LGUI, _______, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+  KC_LCTL, KC_LALT, KC_LGUI, _______, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
 ),
 
 /* Lower
@@ -55,11 +55,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_LOWER] = LAYOUT_ortho_4x12( \
+[_LOWER] = LAYOUT_ortho_4x12(
-  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  BL_TOGG, BL_INC , BL_DEC , _______, _______, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  BL_TOGG, BL_INC , BL_DEC , _______, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
 
 /* Raise
@@ -73,11 +73,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
  * `-----------------------------------------------------------------------------------'
  */
-[_RAISE] = LAYOUT_ortho_4x12( \
+[_RAISE] = LAYOUT_ortho_4x12(
-  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
-  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
-  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
 ),
 
 /* Adjust (Lower + Raise)
@@ -91,10 +91,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |      |      |      |      |      |             |      |      |      |      |      |
  * `-----------------------------------------------------------------------------------'
  */
-[_ADJUST] =  LAYOUT_ortho_4x12( \
+[_ADJUST] =  LAYOUT_ortho_4x12(
-  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,\
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-  _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______,\
+  _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______,
-  _______, BL_TOGG, BL_INC,  BL_DEC , _______, _______, _______, _______, _______, _______, _______, _______ \
+  _______, BL_TOGG, BL_INC,  BL_DEC , _______, _______, _______, _______, _______, _______, _______, _______
 )
 };

keyboards/acheron/shark/rules.mk

@@ -13,8 +13,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # Enable N-Key Rollover
-NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/acr60/rules.mk

@@ -5,14 +5,14 @@ MCU = atmega32u4
 BOOTLOADER = atmel-dfu
 
 # Build Options
-#   comment out to disable the options.
+#   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control
 CONSOLE_ENABLE = no	# Console for debug
 COMMAND_ENABLE = no    # Commands for debug and configuration
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 AUDIO_ENABLE = no
 RGBLIGHT_ENABLE = yes

keyboards/adelheid/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 AUDIO_ENABLE = no           # Audio output

keyboards/adkb96/rules.mk

@@ -12,7 +12,7 @@ MOUSEKEY_ENABLE = no       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-NKRO_ENABLE = yes            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
 BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
 RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight. 

keyboards/aeboards/aegis/rules.mk

@@ -12,7 +12,6 @@ MOUSEKEY_ENABLE = no       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no        # Console for debug
 COMMAND_ENABLE = no        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output

keyboards/aeboards/constellation/rev1/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output
 LTO_ENABLE = yes

keyboards/aeboards/constellation/rev2/rules.mk

@@ -12,8 +12,7 @@ MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # Enable N-Key Rollover
-NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 AUDIO_ENABLE = no           # Audio output