Add missing virtser_init() to ChibiOS code (#15356)

Co-authored-by: fenuks <fenuks>

docs/breaking_changes.md

@@ -24,7 +24,7 @@ The next Breaking Change is scheduled for February 26, 2022.
 
 ### Important Dates
 
-* [x] 2022 Nov 27 - `develop` is tagged with a new release version. Each push to `master` is subsequently merged to `develop` by GitHub actions.
+* [x] 2021 Nov 27 - `develop` is tagged with a new release version. Each push to `master` is subsequently merged to `develop` by GitHub actions.
 * [ ] 2022 Jan 31 - `develop` closed to new PR's.
 * [ ] 2022 Jan 31 - Call for testers.
 * [ ] 2022 Feb 12 - Last day for merges -- after this point `develop` is locked for testing and accepts only bugfixes

docs/feature_swap_hands.md

@@ -27,5 +27,7 @@ Note that the array indices are reversed same as the matrix and the values are o
 |`SH_MON`   |Swaps hands when pressed, returns to normal when released (momentary).   |
 |`SH_MOFF`  |Momentarily turns off swap.                                              |
 |`SH_TG`    |Toggles swap on and off with every key press.                            |
-|`SH_TT`    |Toggles with a tap; momentary when held.                                 |
+|`SH_TT`    |Momentary swap when held, toggles with repeated taps (see below).        |
 |`SH_OS`    |One shot swap hands: toggles while pressed or until next key press.      |
+
+`SH_TT` swap-hands tap-toggle key is similar to [layer tap-toggle](feature_layers.md?id=switching-and-toggling-layers). Tapping repeatedly (5 taps by default) will toggle swap-hands on or off, like `SH_TG`. Tap-toggle count can be changed by defining a value for `TAPPING_TOGGLE`.

keyboards/0xcb/1337/config.h

@@ -37,10 +37,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     { E6, B4, B2 } \
 }
 #define TAP_CODE_DELAY 10
-#define ENCODER_DIRECTION_FLIP
 #define ENCODER_RESOLUTION 4
-#define ENCODERS_PAD_A { F5 }
+#define ENCODERS_PAD_A { F6 }
-#define ENCODERS_PAD_B { F6 }
+#define ENCODERS_PAD_B { F5 }
 
 #define BACKLIGHT_PIN B5
 #define BACKLIGHT_BREATHING

keyboards/0xcb/static/config.h

@@ -48,7 +48,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DIODE_DIRECTION COL2ROW
 
 #define TAP_CODE_DELAY 10
-#define ENCODER_DIRECTION_FLIP
 #define ENCODER_RESOLUTION 4
 #define ENCODERS_PAD_A { D0 }
 #define ENCODERS_PAD_B { D1 }

keyboards/0xcb/static/keymaps/bongocat/keymap.c

@@ -107,7 +107,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) {
 #endif
 
 /* oled stuff :) */
-#ifdef OLED_DRIVER_ENABLE
+#ifdef OLED_ENABLE
 #define IDLE_FRAMES 5
 #define IDLE_SPEED 20 // below this wpm value your animation will idle
 #define TAP_FRAMES 2

keyboards/0xcb/static/readme.md

@@ -4,7 +4,7 @@ Macro keypad
 
 * Keyboard Maintainer: [Conor Burns](https://github.com/conor-burns)
 * Hardware Supported: https://github.com/0xCB-dev/0xcb-static
-* Hardware Availability: Soon on tindie or order your own parts - the hardware in the repo is Open Source :D
+* Hardware Availability: On CandyKeys or order your own parts - the hardware in the repo is Open Source :D
 * PCB renders :)
 
 ![](https://github.com/0xCB-dev/0xcb-static/blob/main/PCB/rev1.0/top.png)

keyboards/3w6/rev2/rev2.c

@@ -15,3 +15,20 @@
  */
 
 #include "rev2.h"
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+    // Left
+    {{4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}},
+    {{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}},
+    {{4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}},
+    {{4, 7}, {3, 7}, {2, 7}, {1, 7}, {0, 7}},
+    // Right
+    {{4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
+    {{4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
+    {{4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
+    {{4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}}
+};
+#endif
+

keyboards/40percentclub/polyandry/config.h

@@ -0,0 +1,90 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    di0ib
+#define PRODUCT         Polypad
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+//more detailed config options start below: 
+
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0

keyboards/40percentclub/polyandry/info.json

@@ -0,0 +1,27 @@
+{
+    "keyboard_name": "Polyandry",
+    "url": "",
+    "maintainer": "QMK",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label": "k000", "x": 0, "y": 0},
+                {"label": "k001", "x": 1, "y": 0},
+                {"label": "k002", "x": 2, "y": 0},
+
+                {"label": "k003", "x": 0, "y": 1},
+                {"label": "k004", "x": 1, "y": 1},
+                {"label": "k005", "x": 2, "y": 1},
+
+                {"label": "k006", "x": 0, "y": 2},
+                {"label": "k007", "x": 1, "y": 2},
+                {"label": "k008", "x": 2, "y": 2},
+
+                {"label": "k009", "x": 0, "y": 3},
+                {"label": "k010", "x": 1, "y": 3},
+                {"label": "k011", "x": 2, "y": 3}
+
+            ]
+        }
+    }
+}

keyboards/40percentclub/polyandry/keymaps/default/keymap.c

@@ -0,0 +1,30 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT(
+		KC_1, KC_2, KC_3, 
+		KC_4, KC_5, KC_6, 
+		KC_7, KC_8, KC_9, 
+		KC_0, KC_A, KC_B
+	),
+
+};
+
+
+

keyboards/40percentclub/polyandry/polyandry.c

@@ -0,0 +1,16 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "polyandry.h"

keyboards/40percentclub/polyandry/polyandry.h

@@ -0,0 +1,24 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#ifdef KEYBOARD_40percentclub_polyandry_promicro
+    #include "promicro.h"
+#elif KEYBOARD_40percentclub_polyandry_teensy2
+    #include "teensy2.h"
+#endif

keyboards/40percentclub/polyandry/promicro/config.h

@@ -0,0 +1,34 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 12
+
+/* key matrix pins 
+ * Direct pins is not used because there is not a shared ground position
+ * between all compatible microcontrollers.
+*/ 
+#define MATRIX_ROW_PINS { D7 }
+#define MATRIX_COL_PINS { D1, D0, D4, C6, E6, B4, F4, F5, F6, F7, B3, B2 }
+#define UNUSED_PINS
+
+/* doesn't really matter lol */
+#define DIODE_DIRECTION COL2ROW

keyboards/40percentclub/polyandry/promicro/promicro.c

@@ -0,0 +1,16 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "promicro.h"

keyboards/40percentclub/polyandry/promicro/promicro.h

@@ -0,0 +1,27 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "polyandry.h"
+
+#define LAYOUT( \
+	K000, K001, K002, \
+ 	K003, K004, K005, \
+	K006, K007, K008, \
+	K009, K010, K011  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }  \
+}

keyboards/40percentclub/polyandry/promicro/rules.mk

@@ -0,0 +1,5 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina

keyboards/40percentclub/polyandry/readme.md

@@ -0,0 +1,53 @@
+# Polyandry/polypad
+
+![Polyandry](https://1.bp.blogspot.com/-97uoICZvZec/XSdpvCVFFlI/AAAAAAACVZY/BlCRjxjDqDAxOZa6C5ddQr0OsFQ9VZv5wCLcBGAs/s1600/d1.jpg)
+===
+
+3x4/4x3 grid layout, multiple controllers supported
+- Pro Micro
+- PJRC Teensy 2.0
+
+(**The below are not currently ported:**)
+
+- PJRC Teensy LC/3.2 
+- PJRC Teensy 3.5/3.6
+- Adafruit ItsyBitsy ATMega32u4
+- Adafruit ItsyBitsy M0
+- Adafruit ItsyBitsy M4
+
+The matrix is electrically 1x12 with no diodes, with a thirteenth pin used for the column rather than a ground in order to be compatible with all the listed microcontrollers..
+
+The default keymap is a testing keymap that is intended to make sure all of the keys on the matrix are working and properly assigned.
+
+[The original (minimal arduino sketch) firmware, with support for some unsupported controllers](https://git.40percent.club/di0ib/Misc/src/branch/master/polyandry)
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: Polyandry PCB  
+Hardware Availability: [Polyandry gerbers are on 40percent.club](https://www.40percent.club/2019/07/polyandry.html)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 40percentclub/polyandry:default 
+    or
+    qmk compile -kb 40percentclub/polyandry -km default
+
+Default firmware is for an Arduino Pro Micro knockoff.
+
+If you would like to specify a controller:
+
+    make 40percentclub/polyandry/promicro:default 
+    or
+    qmk compile -kb 40percentclub/polyandry/promicro -km default
+    make 40percentclub/polyandry/teensy2:default 
+    or
+    qmk compile -kb 40percentclub/polyandry/teensy2 -km default
+
+## Bootloader
+
+Enter the bootloader in 3 ways: 
+
+*  **Bootmagic reset**: Hold down the top left key of the keyboard (top right or bottom left in horizontal configuration)
+* **Physical reset**: Briefly press the button on the bottom of the microcontroller or, if not present short the pin marked RST to a GND.
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/40percentclub/polyandry/rules.mk

@@ -0,0 +1,17 @@
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+DEFAULT_FOLDER = 40percentclub/polyandry/promicro

keyboards/40percentclub/polyandry/teensy2/config.h

@@ -0,0 +1,36 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 12
+
+/* key matrix pins */
+
+// Note from original contributor (ryjelsum):
+// Untested - don't have teensy2. if some keys do not function or are in wrong place,
+// please check the pin definitions. I may have screwed up. :) 
+
+#define MATRIX_ROW_PINS { D3 }
+#define MATRIX_COL_PINS { B7, D0, D1, D2, C6, C7, F6, F7, B6, B5, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW

keyboards/40percentclub/polyandry/teensy2/rules.mk

@@ -0,0 +1,5 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = halfkay

keyboards/40percentclub/polyandry/teensy2/teensy2.c

@@ -0,0 +1,16 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "teensy2.h"

keyboards/40percentclub/polyandry/teensy2/teensy2.h

@@ -0,0 +1,32 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+//NOTE TO FUTURE FROM RYJELSUM (original contributor):
+//This has been unchanged from the promicro.h file. 
+//I DO NOT HAVE A TEENSY 2.0 TO TEST WITH.
+//I believe this should still work - but it's not a sure thing.
+
+#include "polyandry.h"
+
+#define LAYOUT( \
+	K000, K001, K002, \
+ 	K003, K004, K005, \
+	K006, K007, K008, \
+	K009, K010, K011  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }  \
+}

keyboards/a_dux/a_dux.c

@@ -1,4 +1,8 @@
-/* Copyright 2018-2020 ENDO Katsuhiro <[email protected]> David Philip Barr <@davidphilipbarr> Pierre Chevalier <[email protected]>
+/* Copyright 2018-2020
+ * ENDO Katsuhiro <[email protected]>
+ * David Philip Barr <@davidphilipbarr>
+ * Pierre Chevalier <[email protected]>
+ * @filterpaper
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,3 +18,20 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "a_dux.h"
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+    // Left
+    {{4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}},
+    {{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}},
+    {{4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}},
+    {{1, 7}, {0, 7}, {2, 7}, {3, 7}, {4, 7}},
+    // Right
+    {{4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
+    {{4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
+    {{4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
+    {{1, 3}, {0, 3}, {2, 3}, {3, 3}, {4, 3}}
+};
+#endif
+

keyboards/a_dux/readme.md

@@ -28,7 +28,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
 
 ## Setting Handedness
 
-Keyboard uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default. The make commands are:
+Firmware uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default and it must be *configured once* on each side. The make commands are:
 
     make a_dux:default:dfu-split-left
     make a_dux:default:dfu-split-right

keyboards/absinthe/config.h

@@ -44,10 +44,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, D3, D0 }
 #define UNUSED_PINS
 
-#define ENCODERS_PAD_A { D5 }
+#define ENCODERS_PAD_A { B7 }
-#define ENCODERS_PAD_B { B7 }
+#define ENCODERS_PAD_B { D5 }
-
-#define ENCODER_DIRECTION_FLIP
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW

keyboards/aplyard/aplx6/rev2/config.h

@@ -41,9 +41,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define TAPPING_TERM 200
 
 /* Encoder */
-#define ENCODERS_PAD_A { F4 }
+#define ENCODERS_PAD_A { F5 }
-#define ENCODERS_PAD_B { F5 }
+#define ENCODERS_PAD_B { F4 }
 #define ENCODER_RESOLUTION 4
-#define ENCODER_DIRECTION_FLIP
 
 #define TAP_CODE_DELAY 50

keyboards/basketweave/config.h

@@ -50,10 +50,9 @@
  */
 // #define GRAVE_ESC_CTRL_OVERRIDE
 
-#define ENCODERS_PAD_A { D7 }
+#define ENCODERS_PAD_A { C0 }
-#define ENCODERS_PAD_B { C0 }
+#define ENCODERS_PAD_B { D7 }
 #define ENCODER_RESOLUTION 4
-#define ENCODER_DIRECTION_FLIP
 #define TAP_CODE_DELAY 10
 
 /* Bootmagic Lite key configuration */

keyboards/boardsource/technik_o/rules.mk

@@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
+MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration

keyboards/boardsource/technik_s/rules.mk

@@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no        # Mouse keys
+MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration

keyboards/bpiphany/ghost_squid/config.h

@@ -0,0 +1,42 @@
+/*
+Copyright 2016 Daniel Svensson <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6050
+#define DEVICE_VER      0x0104
+#define MANUFACTURER    Bathroom Epiphanies
+#define PRODUCT         ghost_squid
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 18
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define LED_PIN_ON_STATE 0
+#define LED_NUM_LOCK_PIN C5
+#define LED_CAPS_LOCK_PIN C6
+#define LED_SCROLL_LOCK_PIN B7
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5

keyboards/bpiphany/ghost_squid/ghost_squid.c

@@ -0,0 +1,26 @@
+/*
+Copyright 2016 Daniel Svensson <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "ghost_squid.h"
+
+void keyboard_pre_init_kb(void) {
+    setPinOutput(D0);
+    writePinLow(D0);
+    fn_led_off();
+    
+    keyboard_pre_init_user();
+}

keyboards/bpiphany/ghost_squid/ghost_squid.h

@@ -0,0 +1,44 @@
+/*
+Copyright 2016 Daniel Svensson <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define fn_led_on() writePinLow(D0)
+#define fn_led_off() writePinHigh(D0)
+
+#define  ___ KC_NO
+
+#define LAYOUT( \
+	KJ6,      KI4, KH4, KH2, KH6, KA7, KE6, KD2, KD4, KB4, KB7, KB6, KB0,   KC7, KC5, KA5,                       \
+	KJ4, KJ7, KI7, KH7, KG7, KG4, KF4, KF7, KE7, KD7, KR7, KR4, KE4, KB2,   KL4, KO4, KQ4,   KK1, KL1, KQ1, KQ0, \
+	KJ2, KJ5, KI5, KH5, KG5, KG2, KF2, KF5, KE5, KD5, KR5, KR2, KE2, KB3,   KK4, KO7, KQ7,   KK5, KL5, KQ5, KO5, \
+	KI2, KJ3, KI3, KH3, KG3, KG6, KF6, KF3, KE3, KD3, KR3, KR6,      KB1,                    KK2, KL2, KQ2,      \
+	KN2, KI6, KJ1, KI1, KH1, KG1, KG0, KF0, KF1, KE1, KD1, KR0,      KN3,        KO6,        KK3, KL3, KQ3, KO3, \
+	KA4, KP2, KC6,                KK6,                KC0, KM3, KD0, KA1,   KO0, KK0, KL0,   KL6,      KQ6       \
+	) { /*        00-A  01-B  02-C  03-D  04-E  05-F  06-G  07-H  08-I  09-J  10-K  11-L  12-M  13-N  14-O  15-P  16-Q  17-R */ \
+		/* 0 */  { ___ , KB0 , KC0 , KD0 , ___ , KF0 , KG0 , ___ , ___ , ___ , KK0 , KL0 , ___ , ___ , KO0 , ___ , KQ0 , KR0 }, \
+		/* 1 */  { KA1 , KB1 , ___ , KD1 , KE1 , KF1 , KG1 , KH1 , KI1 , KJ1 , KK1 , KL1 , ___ , ___ , ___ , ___ , KQ1 , ___ }, \
+		/* 2 */  { ___ , KB2 , ___ , KD2 , KE2 , KF2 , KG2 , KH2 , KI2 , KJ2 , KK2 , KL2 , ___ , KN2 , ___ , KP2 , KQ2 , KR2 }, \
+		/* 3 */  { ___ , KB3 , ___ , KD3 , KE3 , KF3 , KG3 , KH3 , KI3 , KJ3 , KK3 , KL3 , KM3 , KN3 , KO3 , ___ , KQ3 , KR3 }, \
+		/* 4 */  { KA4 , KB4 , ___ , KD4 , KE4 , KF4 , KG4 , KH4 , KI4 , KJ4 , KK4 , KL4 , ___ , ___ , KO4 , ___ , KQ4 , KR4 }, \
+		/* 5 */  { KA5 , ___ , KC5 , KD5 , KE5 , KF5 , KG5 , KH5 , KI5 , KJ5 , KK5 , KL5 , ___ , ___ , KO5 , ___ , KQ5 , KR5 }, \
+		/* 6 */  { ___ , KB6 , KC6 , ___ , KE6 , KF6 , KG6 , KH6 , KI6 , KJ6 , KK6 , KL6 , ___ , ___ , KO6 , ___ , KQ6 , KR6 }, \
+		/* 7 */  { KA7 , KB7 , KC7 , KD7 , KE7 , KF7 , KG7 , KH7 , KI7 , KJ7 , ___ , ___ , ___ , ___ , KO7 , ___ , KQ7 , KR7 }  \
+	}
+

keyboards/bpiphany/ghost_squid/keymaps/default/keymap.c

@@ -0,0 +1,77 @@
+/*
+Copyright 2016 Daniel Svensson <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+/* Default qwerty layout
+* ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐     ┌───────────┐
+* │ESC│   │F1 │F2 │F3 │F4 │ │F5 │F6 │F7 │F8 │ │F9 │F10│F11│F12│ │PRT│SCR│PAU│     │Ghost Squid│
+* └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘     └───────────┘
+* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ ┌───┬───┬───┬───┐
+* │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │INS│HOM│PgU│ │NUM│ / │ * │ - │
+* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ ├───┼───┼───┼───┤
+* │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │     │ │DEL│END│PgD│ │ 7 │ 8 │ 9 │   │
+* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐  ↲ │ └───┴───┴───┘ ├───┼───┼───┤ + │
+* │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ \ │    │               │ 7 │ 8 │ 9 │   │
+* ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤     ┌───┐     ├───┼───┼───┼───┤
+* │Shif│ # │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │    Shift │     │ ↑ │     │ 1 │ 2 │ 3 │   │
+* ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ ├───┴───┼───┤ ↲ │
+* │Ctrl│GUI │Alt │                        │ Alt│ GUI│Fn  │Ctrl│ │ ← │ ↓ │ → │ │   0   │ , │   │ 
+* └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘
+*/
+
+enum layer_names {
+    KM_QWERTY,
+    KM_MEDIA,
+    KM_GUI_LOCK
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	/* Layer 0: Standard ISO layer */
+	[KM_QWERTY] = LAYOUT(
+KC_ESC,          KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9,  KC_F10, KC_F11, KC_F12,   KC_PSCR,KC_SLCK,KC_PAUS,
+KC_GRV,  KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_BSPC,  KC_INS, KC_HOME,KC_PGUP,    KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS,
+KC_TAB,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,  KC_DEL, KC_END, KC_PGDN,    KC_P7,  KC_P8,  KC_P9,  KC_PPLS,
+KC_CLCK, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,        KC_ENT,                               KC_P4,  KC_P5,  KC_P6,
+KC_LSFT, KC_NUBS,KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,        KC_RSFT,          KC_UP,              KC_P1,  KC_P2,  KC_P3,  KC_PENT,
+KC_LCTL, KC_LGUI,KC_LALT,                       KC_SPC,                          KC_RALT,KC_RGUI,MO(KM_MEDIA),KC_RCTL,   KC_LEFT,KC_DOWN,KC_RGHT,    KC_P0,          KC_PDOT),
+	/* Layer 1: Function layer */
+	[KM_MEDIA] = LAYOUT(
+_______,_______,_______,_______,_______,  KC_MEDIA_PLAY_PAUSE, KC_MEDIA_STOP, KC_MEDIA_PREV_TRACK, KC_MEDIA_NEXT_TRACK,  TG(KM_GUI_LOCK),KC_MUTE, KC_VOLD, KC_VOLU,_______,_______, RESET,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,  _______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______),
+	[KM_GUI_LOCK] = LAYOUT(
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+_______,KC_NO,_______,_______,_______,KC_NO,_______,_______,_______,_______,_______,_______,_______)
+};
+
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    if (IS_LAYER_ON_STATE(state, KM_GUI_LOCK)) {
+        fn_led_on();
+    } else {
+        fn_led_off();
+    }
+    return state;
+}

keyboards/bpiphany/ghost_squid/keymaps/default/readme.md

@@ -0,0 +1 @@
+# Default layout desc TODO

keyboards/bpiphany/ghost_squid/matrix.c

@@ -0,0 +1,97 @@
+/*
+  Copyright 2014 Ralf Schmitt <[email protected]>
+  Copyright 2016 Daniel Svensson <[email protected]>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "matrix.h"
+#include "quantum.h"
+
+matrix_row_t read_rows(void) {
+    return
+        (PINB & (1 << 1) ? 0 : ((matrix_row_t)1 << 0)) |
+        (PINC & (1 << 2) ? 0 : ((matrix_row_t)1 << 1)) |
+        (PINB & (1 << 6) ? 0 : ((matrix_row_t)1 << 2)) |
+        (PINB & (1 << 4) ? 0 : ((matrix_row_t)1 << 3)) |
+        (PINB & (1 << 3) ? 0 : ((matrix_row_t)1 << 4)) |
+        (PINB & (1 << 2) ? 0 : ((matrix_row_t)1 << 5)) |
+        (PINB & (1 << 0) ? 0 : ((matrix_row_t)1 << 6)) |
+        (PINB & (1 << 5) ? 0 : ((matrix_row_t)1 << 7));
+}
+
+void select_col(uint8_t col) {
+    switch (col) {
+        case  0: PORTD = (PORTD & ~0b01111110) | 0b01100010; break;
+        case  1: PORTD = (PORTD & ~0b01111110) | 0b01101000; break;
+        case  2: PORTD = (PORTD & ~0b01111110) | 0b01101100; break;
+        case  3: PORTD = (PORTD & ~0b01111110) | 0b01110000; break;
+        case  4: PORTD = (PORTD & ~0b01111110) | 0b01111000; break;
+        case  5: PORTD = (PORTD & ~0b01111110) | 0b01100000; break;
+        case  6: PORTD = (PORTD & ~0b01111110) | 0b01110100; break;
+        case  7: PORTD = (PORTD & ~0b01111110) | 0b01100100; break;
+        case  8: PORTD = (PORTD & ~0b01111110) | 0b01111100; break;
+        case  9: PORTD = (PORTD & ~0b01111110) | 0b01101010; break;
+        case 10: PORTD = (PORTD & ~0b01111110) | 0b00110110; break;
+        case 11: PORTD = (PORTD & ~0b01111110) | 0b00010110; break;
+        case 12: PORTD = (PORTD & ~0b01111110) | 0b01001110; break;
+        case 13: PORTD = (PORTD & ~0b01111110) | 0b00111110; break;
+        case 14: PORTD = (PORTD & ~0b01111110) | 0b00011110; break;
+        case 15: PORTD = (PORTD & ~0b01111110) | 0b01000110; break;
+        case 16: PORTD = (PORTD & ~0b01111110) | 0b00100110; break;
+        case 17: PORTD = (PORTD & ~0b01111110) | 0b00101110; break;
+    }
+}
+
+void matrix_init_custom(void) {
+    /* Column output pins */
+    setPinOutput(D1);
+    setPinOutput(D2);
+    setPinOutput(D3);
+    setPinOutput(D4);
+    setPinOutput(D5);
+    setPinOutput(D6);
+
+    /* Row input pins */
+    writePinHigh(B0);
+    writePinHigh(B1);
+    writePinHigh(B2);
+    writePinHigh(B3);
+    writePinHigh(B4);
+    writePinHigh(B5);
+    writePinHigh(B6);
+    writePinHigh(C2);
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    bool changed = false;
+
+    for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+        select_col(col);
+        matrix_io_delay();
+        matrix_row_t rows = read_rows();
+
+        for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+            bool prev_bit = current_matrix[row] & ((matrix_row_t)1 << col);
+            bool curr_bit = rows & (1 << row);
+
+            if (prev_bit != curr_bit) {
+                current_matrix[row] ^= (matrix_row_t)1 << col;
+                changed = true;
+            }
+        }
+    }
+
+    return changed;
+}

keyboards/bpiphany/ghost_squid/readme.md

@@ -0,0 +1,27 @@
+# Ghost Squid Controller
+
+This is the firmware for Rev. 20140518 of the Ghost Squid controller by [Bathroom Epiphanies](http://bathroomepiphanies.com/controllers/), a replacement controller for the [Cooler Master Quick Fire XT](https://www.coolermaster.com/catalog/peripheral/keyboards/quick-fire-xt/).
+
+The code was adapted from the [BathroomEpiphanies QMK Firmware](https://github.com/BathroomEpiphanies/epiphanies_qmk_keyboard/tree/master/keyboards/ghost_squid_20140518).
+
+* Keyboard Maintainer: QMK Community
+* Hardware Supported: Ghost Squid
+* Hardware Availability: [1upkeyboards](https://1upkeyboards.com/shop/controllers/qf-xt-ghost-squid-controller-2/)
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+Make example for this keyboard (after setting up your build environment):
+
+104 key default layout:
+
+    make bpiphany/ghost_squid:default
+
+Flashing example for this keyboard:
+
+    make bpiphany/ghost_squid:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bpiphany/ghost_squid/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+CUSTOM_MATRIX = lite
+SRC += matrix.c

keyboards/cradio/cradio.c

@@ -2,6 +2,7 @@
  * ENDO Katsuhiro <[email protected]>
  * David Philip Barr <@davidphilipbarr>
  * Pierre Chevalier <[email protected]>
+ * @filterpaper
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,3 +19,20 @@
  */
 
 #include "cradio.h"
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+    // Left
+    {{4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}},
+    {{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}},
+    {{4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}},
+    {{1, 7}, {0, 7}, {2, 7}, {3, 7}, {4, 7}},
+    // Right
+    {{4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
+    {{4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
+    {{4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
+    {{1, 3}, {0, 3}, {2, 3}, {3, 3}, {4, 3}}
+};
+#endif
+

keyboards/cradio/readme.md

@@ -8,7 +8,8 @@ Cradio are low-profile 34-key split-keyboards designed by [@davidphilipbarr](htt
 
 * Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr)
 * Hardware Supported:
-    * [Sweep](https://github.com/davidphilipbarr/Sweep) (all versions)
+    * [Cradio](https://github.com/davidphilipbarr/36keys/tree/master/34Keys)
+    * [Sweep](https://github.com/davidphilipbarr/Sweep)
     * [Hypergarlic](https://github.com/davidphilipbarr/hypergolic/tree/main/hypergarlic)
     * [Paroxysm](https://github.com/davidphilipbarr/hypergolic/tree/main/paroxysm)
     * Variants of the same 34-key direct pin PCB
@@ -22,7 +23,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
 
 ## Setting Handedness
 
-Keyboard uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default. The make commands are:
+Firmware uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default and it must be *configured once* on each side. The make commands are:
 
     make cradio:default:dfu-split-left
     make cradio:default:dfu-split-right
@@ -36,3 +37,24 @@ Enter the bootloader in 3 ways:
 * **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
 * **Physical reset button**: Briefly press the reset button soldered on the PCB.
 * **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
+
+## Swapped Pins
+
+If you have one of the PCB variant with swapped letters `Q` and `B` / `P` and `N`, add the following code to your keymap's `config.h` to swap pins `E6` and `D7` in the firmware:
+```c
+#undef DIRECT_PINS
+#define DIRECT_PINS { \
+    { D7, F7, F6, F5, F4 }, \
+    { B1, B3, B2, B6, D3 }, \
+    { D1, D0, D4, C6, E6 }, \
+    { B4, B5, NO_PIN, NO_PIN, NO_PIN } \
+}
+#undef DIRECT_PINS_RIGHT
+#define DIRECT_PINS_RIGHT { \
+    { F4, F5, F6, F7, D7 }, \
+    { D3, B6, B2, B3, B1 }, \
+    { E6, C6, D4, D0, D1 }, \
+    { B5, B4, NO_PIN, NO_PIN, NO_PIN } \
+}
+```
+

keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c

@@ -67,3 +67,8 @@ void rgb_matrix_indicators_user(void)
 		rgb_matrix_set_color(22, 200, 0, 200);
 	}
 }
+
+void keyboard_pre_init_user(void) {
+    setPinOutput(B5);
+    writePinLow(B5);
+}

keyboards/ferris/sweep/readme.md

@@ -8,9 +8,8 @@ A version of the Ferris keyboard that uses a daughterboard, designed by the fant
 ## Keyboard Info
 
 * Keyboard Maintainer: [Pierre Chevalier](https://github.com/pierrechevalier83)
-* Hardware Supported:
+* Hardware Supported: [Sweep](https://github.com/davidphilipbarr/Sweep) (all versions)
-	* Ferris sweep (With pro-micro. Comes in a couple of PCB edge cuts shapes, but with identical pinout)
+* Hardware Availability: Print the PCB with gerber files from the repository
-* Hardware Availability: @iamnotyourbroom in the 40% discord chat server may have some spares for you.
 
 Make example for this keyboard (after setting up your build environment):
 
@@ -20,7 +19,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to
 
 ## Setting Handedness
 
-Keyboard uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default. The make commands are:
+Firmware uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default and it must be *configured once* on each side. The make commands are:
 
     make ferris/sweep:default:avrdude-split-left
     make ferris/sweep:default:avrdude-split-right
@@ -35,3 +34,22 @@ Enter the bootloader in 3 ways:
 * **Physical reset button**: Briefly press the reset button soldered on the PCB.
 * **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
 
+## Swapped Pins
+
+If you printed one of the PCB variant with swapped letters `Q` and `B` / `P` and `N`, add the following code to your keymap's `config.h` to swap pins `E6` and `D7` in the firmware:
+```c
+#undef DIRECT_PINS
+#define DIRECT_PINS { \
+    { D7, F7, F6, F5, F4 }, \
+    { B1, B3, B2, B6, D3 }, \
+    { D1, D0, D4, C6, E6 }, \
+    { B4, B5, NO_PIN, NO_PIN, NO_PIN } \
+}
+#undef DIRECT_PINS_RIGHT
+#define DIRECT_PINS_RIGHT { \
+    { F4, F5, F6, F7, D7 }, \
+    { D3, B6, B2, B3, B1 }, \
+    { E6, C6, D4, D0, D1 }, \
+    { B5, B4, NO_PIN, NO_PIN, NO_PIN } \
+}
+```

keyboards/ferris/sweep/sweep.c

@@ -14,3 +14,20 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "sweep.h"
+
+#ifdef SWAP_HANDS_ENABLE
+__attribute__ ((weak))
+const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+    // Left
+    {{4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}},
+    {{4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}},
+    {{4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}},
+    {{1, 7}, {0, 7}, {2, 7}, {3, 7}, {4, 7}},
+    // Right
+    {{4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
+    {{4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
+    {{4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
+    {{1, 3}, {0, 3}, {2, 3}, {3, 3}, {4, 3}}
+};
+#endif
+

keyboards/fjlabs/7vhotswap/7vhotswap.c

@@ -0,0 +1,14 @@
+/*
+Copyright 2021 <[email protected]>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "7vhotswap.h"

keyboards/fjlabs/7vhotswap/7vhotswap.h

@@ -0,0 +1,34 @@
+/*
+Copyright 2021 <[email protected]>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+/* === All used matrix spots populated === */
+#define LAYOUT_75_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,       \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E,  \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E,  \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,  \
+    K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B,      K4D,       \
+    K50, K51, K52,           K55,                K59, K5A,      K5C, K5D, K5E  \
+) { \
+    { K00, K01, K02, K03,   K04,   K05, K06,   K07,   K08,   K09, K0A, K0B,   K0C,   K0D, KC_NO },  \
+    { K10, K11, K12, K13,   K14,   K15, K16,   K17,   K18,   K19, K1A, K1B,   K1C,   K1D, K1E   },  \
+    { K20, K21, K22, K23,   K24,   K25, K26,   K27,   K28,   K29, K2A, K2B,   K2C,   K2D, K2E   },  \
+    { K30, K31, K32, K33,   K34,   K35, K36,   K37,   K38,   K39, K3A, K3B,   K3C,   K3D, K3E   },  \
+    { K40, K41, K42, K43,   K44,   K45, K46,   K47,   K48,   K49, K4A, K4B,   KC_NO, K4D, KC_NO },  \
+    { K50, K51, K52, KC_NO, KC_NO, K55, KC_NO, KC_NO, KC_NO, K59, K5A, KC_NO, K5C,   K5D, K5E   }   \
+}

keyboards/fjlabs/7vhotswap/config.h

@@ -0,0 +1,118 @@
+/*
+Copyright 2021 <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x7074 // FJLaboratories
+#define PRODUCT_ID   0x0014 // 7V Hotswap
+#define DEVICE_VER   0x0001 // Version 1
+#define MANUFACTURER    FJLaboratories
+#define PRODUCT         7V Hotswap
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *         ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *å
+*/
+
+// Checked with Eagle Schematic
+#define MATRIX_ROW_PINS { B0, F4, F1, F7, F6, F5 }
+#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6, C6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE 
+
+/* Define RGB */
+#define RGB_DI_PIN C7
+#define RGBLED_NUM 4
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+#define RGBLIGHT_LIMIT_VAL 255
+#define RGB_VAL_STEP 12
+
+/* Define less important options */
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/fjlabs/7vhotswap/info.json

@@ -0,0 +1,97 @@
+{
+    "keyboard_name": "7V Hotswap PCBs",
+    "url": "http://www.fjlaboratories.com/",
+    "maintainer": "FJLabs",
+    "layouts": {
+        "LAYOUT_75_all": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"F1", "x":1.25, "y":0},
+                {"label":"F2", "x":2.25, "y":0},
+                {"label":"F3", "x":3.25, "y":0},
+                {"label":"F4", "x":4.25, "y":0},
+                {"label":"F5", "x":5.5, "y":0},
+                {"label":"F6", "x":6.5, "y":0},
+                {"label":"F7", "x":7.5, "y":0},
+                {"label":"F8", "x":8.5, "y":0},
+                {"label":"F9", "x":9.75, "y":0},
+                {"label":"F10", "x":10.75, "y":0},
+                {"label":"F11", "x":11.75, "y":0},
+                {"label":"F12", "x":12.75, "y":0},
+                {"label":"Print Screen", "x":14, "y":0}
+
+                {"label":"~", "x":0, "y":1.25},
+                {"label":"!", "x":1, "y":1.25},
+                {"label":"@", "x":2, "y":1.25},
+                {"label":"#", "x":3, "y":1.25},
+                {"label":"$", "x":4, "y":1.25},
+                {"label":"%", "x":5, "y":1.25},
+                {"label":"^", "x":6, "y":1.25},
+                {"label":"&", "x":7, "y":1.25},
+                {"label":"*", "x":8, "y":1.25},
+                {"label":"(", "x":9, "y":1.25},
+                {"label":")", "x":10, "y":1.25},
+                {"label":"_", "x":11, "y":1.25},
+                {"label":"+", "x":12, "y":1.25},
+                {"label":"Back Space", "x":13, "y":1.25},
+                {"label":"Back Space", "x":14, "y":1.25},
+                {"label":"Delete", "x":15.25, "y":1.25},
+
+                {"label":"Tab", "x":0, "y":2.25, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2.25},
+                {"label":"W", "x":2.5, "y":2.25},
+                {"label":"E", "x":3.5, "y":2.25},
+                {"label":"R", "x":4.5, "y":2.25},
+                {"label":"T", "x":5.5, "y":2.25},
+                {"label":"Y", "x":6.5, "y":2.25},
+                {"label":"U", "x":7.5, "y":2.25},
+                {"label":"I", "x":8.5, "y":2.25},
+                {"label":"O", "x":9.5, "y":2.25},
+                {"label":"P", "x":10.5, "y":2.25},
+                {"label":"{", "x":11.5, "y":2.25},
+                {"label":"}", "x":12.5, "y":2.25},
+                {"label":"|", "x":13.5, "y":2.25, "w":1.5},
+                {"label":"Page Up", "x":15.25, "y":2.25},
+
+                {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
+                {"label":"A", "x":1.75, "y":3.25},
+                {"label":"S", "x":2.75, "y":3.25},
+                {"label":"D", "x":3.75, "y":3.25},
+                {"label":"F", "x":4.75, "y":3.25},
+                {"label":"G", "x":5.75, "y":3.25},
+                {"label":"H", "x":6.75, "y":3.25},
+                {"label":"J", "x":7.75, "y":3.25},
+                {"label":"K", "x":8.75, "y":3.25},
+                {"label":"L", "x":9.75, "y":3.25},
+                {"label":":", "x":10.75, "y":3.25},
+                {"label":"SQ", "x":11.75, "y":3.25},
+                {"label":"Enter", "x":12.75, "y":3.25, "w":2.25},
+                {"label":"Page Down", "x":15.25, "y":3.25},
+
+                {"label":"Shift", "x":0, "y":4.25, "w":2.25},
+                {"label":"Z", "x":2.25, "y":4.25},
+                {"label":"X", "x":3.25, "y":4.25},
+                {"label":"C", "x":4.25, "y":4.25},
+                {"label":"V", "x":5.25, "y":4.25},
+                {"label":"B", "x":6.25, "y":4.25},
+                {"label":"N", "x":7.25, "y":4.25},
+                {"label":"M", "x":8.25, "y":4.25},
+                {"label":"<", "x":9.25, "y":4.25},
+                {"label":">", "x":10.25, "y":4.25},
+                {"label":"?", "x":11.25, "y":4.25},
+                {"label":"Shift", "x":12.25, "y":4.25, "w":1.75},
+                {"label":"\u2191", "x":14.25, "y":4.5},
+
+                {"label":"Ctrl", "x":0, "y":5.25, "w":1.25},
+                {"label":"Win", "x":1.25, "y":5.25, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
+                {"x":3.75, "y":5.25, "w":6.25},
+                {"label":"Alt", "x":10, "y":5.25, "w":1.25},
+                {"label":"MO(1)", "x":11.25, "y":5.25, "w":1.25},
+                {"label":"\u2190", "x":12.75, "y":5.5},
+                {"label":"\u2193", "x":13.75, "y":5.5},
+                {"label":"\u2192", "x":14.75, "y":5.5}
+            ]
+        }
+    }
+}

keyboards/fjlabs/7vhotswap/keymaps/default/keymap.c

@@ -0,0 +1,41 @@
+/*
+Copyright 2021 <[email protected]>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_LAYER0] = LAYOUT_75_all(
+        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, 
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, 
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_PGDN,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_LAYER1] = LAYOUT_75_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/fjlabs/7vhotswap/keymaps/via/keymap.c

@@ -0,0 +1,61 @@
+/*
+Copyright 2021 <[email protected]>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _LAYER0,
+    _LAYER1,
+    _LAYER2,
+    _LAYER3,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_LAYER0] = LAYOUT_75_all(
+        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR,
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, 
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, 
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_PGDN,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_LAYER1] = LAYOUT_75_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_LAYER2] = LAYOUT_75_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_LAYER3] = LAYOUT_75_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/fjlabs/7vhotswap/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/fjlabs/7vhotswap/readme.md

@@ -0,0 +1,15 @@
+# 7V Hotswap PCB by FJLaboratories
+
+The following is the QMK Firmware for the 7V Hotswap PCB by [FJLaboratories](https://www.fjlaboratories.com/).
+* Keyboard Maintainer: FJLaboratories
+* Hardware Supported: 7V Hotswap
+
+Make example for this keyboard (after setting up your build environment):
+
+    make fjlabs/7vhotswap:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). 
+
+## Bootloader
+
+You can enter the bootloader by shorting the RST pads on the back of the PCB while the PCB is plugged into the computer. 

keyboards/fjlabs/7vhotswap/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency
+F_CPU = 8000000
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes     # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output

keyboards/handwired/nozbe_macro/config.h

@@ -0,0 +1,57 @@
+/* Copyright 2021 Marcin Leon Omelan (@rozPierog)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Leon Omelan
+#define PRODUCT Nozbe Reunion Pad
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 4
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS \
+    { B0 }
+#define MATRIX_COL_PINS \
+    { D1, D0, D4, C6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B5
+#ifdef BACKLIGHT_PIN
+#    define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+

keyboards/handwired/nozbe_macro/info.json

@@ -0,0 +1,15 @@
+{
+    "keyboard_name": "nozbe_macro",
+    "url": "",
+    "maintainer": "Leon Omelan",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"k00", "x":0, "y":0},
+                {"label":"k01", "x":1, "y":0},
+                {"label":"k02", "x":2, "y":0},
+                {"label":"k03", "x":3, "y":0}
+            ]
+        }
+    }
+}

keyboards/handwired/nozbe_macro/keymaps/default/keymap.c

@@ -0,0 +1,31 @@
+/* Copyright 2021 Marcin Leon Omelan (@rozPierog)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum layer_names { 
+    _BASE, 
+    _FN,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT(
+        LT(_FN, KC_N), LALT(KC_UP), LALT(KC_DOWN), LALT(KC_D)
+    ),
+    [_FN]   = LAYOUT(
+        KC_TRNS, KC_1, KC_2, BL_STEP
+    ),
+};

keyboards/handwired/nozbe_macro/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for nozbe_macro

keyboards/handwired/nozbe_macro/nozbe_macro.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 Marcin Leon Omelan (@rozPierog)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "nozbe_macro.h"

keyboards/handwired/nozbe_macro/nozbe_macro.h

@@ -0,0 +1,25 @@
+/* Copyright 2021 Marcin Leon Omelan (@rozPierog)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    k00, k01, k02, k03 \
+) { \
+    { k00, k01, k02, k03 } \
+}

keyboards/handwired/nozbe_macro/readme.md

@@ -0,0 +1,26 @@
+# Nozbe Macropad handwired
+
+![Nozbe Macropad](https://i.imgur.com/fUMtWmah.png)
+
+4 key macropad with optional rotary encoder.
+
+* Keyboard Maintainer: [rozPierog](https://github.com/rozPierog)
+* Hardware Supported: Custom handwired 4 key (or 3 key + rotary encoder) pad
+* Hardware Availability: *n/a*
+* Github Repository: [NozbePad](https://github.com/rozPierog/NozbePad)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/nozbe_macro:default
+
+Flashing example for this keyboard:
+
+    make handwired/nozbe_macro:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 1 way:
+
+* **Short pins**: short RST and GND pins at the back

keyboards/handwired/nozbe_macro/rules.mk

@@ -0,0 +1,21 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output

keyboards/handwired/tractyl_manuform/5x6_right/config.h

@@ -51,3 +51,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define NO_ACTION_FUNCTION
 
 #define OLED_DISPLAY_128X64
+
+#define POINTING_DEVICE_TASK_THROTTLE
+#define POINTING_DEVICE_RIGHT

keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk

@@ -6,7 +6,7 @@ BOOTLOADER = stm32-dfu
 
 KEYBOARD_SHARED_EP = yes
 CONSOLE_ENABLE     = yes
-MOUSE_SHARED_EP    = no
+MOUSE_SHARED_EP    = yes
 
 EEPROM_DRIVER = spi
 WS2812_DRIVER = pwm

keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h

@@ -19,3 +19,4 @@
 #define TRACKBALL_DPI_OPTIONS { 1200, 1800, 2600, 3400 }
 
 #define DEBOUNCE 45
+#define ENCODER_DEFAULT_POS 0x3

keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c

@@ -125,7 +125,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                      _______, _______,    _______, _______
     ),
     [_ADJUST] = LAYOUT_5x6_right_wrapper(
-        KC_MAKE, ___________________BLANK___________________,                      _________________ADJUST_R1_________________, KC_RST,
+        KC_MAKE, KC_WIDE,KC_AUSSIE,KC_SCRIPT,KC_ZALGO,KC_NOMODE,               KC_NOMODE,KC_BLOCKS,KC_REGIONAL,_______,_______, KC_RST,
         VRSN,    _________________ADJUST_L1_________________,                      _________________ADJUST_R1_________________, EEP_RST,
         KEYLOCK, _________________ADJUST_L2_________________,                      _________________ADJUST_R2_________________, TG_MODS,
         UC_MOD,  _________________ADJUST_L3_________________,                      _________________ADJUST_R3_________________, KC_MPLY,
@@ -407,9 +407,9 @@ void oled_driver_render_logo_left(void) {
     render_kitty();
 
     oled_set_cursor(6, 0);
-    oled_write_P(PSTR("  Tractyl      "), true);
+    oled_write_P(PSTR("  Tractyl      "), false);
     oled_set_cursor(6, 1);
-    oled_write_P(PSTR("     Manuform  "), true);
+    oled_write_P(PSTR("     Manuform  "), false);
     oled_set_cursor(6, 2);
 #    if defined(WPM_ENABLE)
     render_wpm(1);

keyboards/handwired/tractyl_manuform/5x6_right/rules.mk

@@ -17,7 +17,7 @@ SWAP_HANDS_ENABLE = yes
 
 POINTING_DEVICE_ENABLE = yes
 POINTING_DEVICE_DRIVER = pmw3360
-MOUSE_SHARED_EP = no
+MOUSE_SHARED_EP = yes
 
 SPLIT_KEYBOARD = yes
 

keyboards/handwired/tractyl_manuform/tm_sync.c

@@ -14,19 +14,29 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "tractyl_manuform.h"
+#include QMK_KEYBOARD_H
+#include "pointing_device.h"
 #include "transactions.h"
 #include <string.h>
+#ifdef MOUSEKEY_ENABLE
+#    include "mousekey.h"
+#endif
 
-kb_config_data_t  kb_config;
+// typedef struct {
-kb_mouse_report_t sync_mouse_report;
+//     uint16_t device_cpi;
+// } kb_config_data_t;
+
+kb_config_data_t                      kb_config;
+static report_mouse_t                 shared_mouse_report;
+extern const pointing_device_driver_t pointing_device_driver;
 
 void kb_pointer_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) {
-    if (target2initiator_buffer_size == sizeof(sync_mouse_report)) {
+    shared_mouse_report = pointing_device_driver.get_report(shared_mouse_report);
-        memcpy(target2initiator_buffer, &sync_mouse_report, sizeof(sync_mouse_report));
+    memcpy(target2initiator_buffer, &shared_mouse_report, sizeof(report_mouse_t));
-    }
+    shared_mouse_report.x = 0;
-    sync_mouse_report.x = 0;
+    shared_mouse_report.y = 0;
-    sync_mouse_report.y = 0;
+    shared_mouse_report.h = 0;
+    shared_mouse_report.v = 0;
 }
 
 void kb_config_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) {
@@ -38,12 +48,15 @@ void kb_config_sync_handler(uint8_t initiator2target_buffer_size, const void* in
     // Check if the state values are different
     if (cpi != kb_config.device_cpi) {
         cpi = kb_config.device_cpi;
+        if (!is_keyboard_left()) {
+            pointing_device_set_cpi(cpi);
+        }
     }
 }
 
 void keyboard_pre_init_sync(void) {
     memset(&kb_config, 0, sizeof(kb_config));
-    memset(&sync_mouse_report, 0, sizeof(sync_mouse_report));
+    memset(&shared_mouse_report, 0, sizeof(shared_mouse_report));
 }
 
 void keyboard_post_init_sync(void) {
@@ -84,3 +97,83 @@ void trackball_set_cpi(uint16_t cpi) {
         pointing_device_set_cpi(cpi);
     }
 }
+
+void pointing_device_task(void) {
+    if (!is_keyboard_master()) {
+        return;
+    }
+
+#if defined(POINTING_DEVICE_TASK_THROTTLE)
+    static uint32_t last_exec = 0;
+    if (timer_elapsed32(last_exec) < 1) {
+        return;
+    }
+    last_exec = timer_read32();
+#endif
+
+    report_mouse_t local_report = pointing_device_get_report();
+
+    // Gather report info
+#ifdef POINTING_DEVICE_MOTION_PIN
+    if (!readPin(POINTING_DEVICE_MOTION_PIN))
+#endif
+#if defined(POINTING_DEVICE_COMBINED)
+        local_report = pointing_device_driver.get_report(local_report);
+    transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(report_mouse_t), &shared_mouse_report);
+    local_report.x = local_report.x | shared_mouse_report.x;
+    local_report.y = local_report.y | shared_mouse_report.y;
+    local_report.h = local_report.h | shared_mouse_report.h;
+    local_report.v = local_report.v | shared_mouse_report.v;
+#elif defined(POINTING_DEVICE_LEFT)
+    if (is_keyboard_left()) {
+        local_report = pointing_device_driver.get_report(local_report);
+    } else {
+        transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(report_mouse_t), &local_report);
+    }
+#elif defined(POINTING_DEVICE_RIGHT)
+    if (!is_keyboard_left()) {
+        local_report = pointing_device_driver.get_report(local_report);
+    } else {
+        transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(report_mouse_t), &local_report);
+    }
+#else
+#    error "You need to define the side(s) the pointing device is on. POINTING_DEVICE_COMBINED / POINTING_DEVICE_LEFT / POINTING_DEVICE_RIGHT"
+#endif
+
+    // Support rotation of the sensor data
+#if defined(POINTING_DEVICE_ROTATION_90) || defined(POINTING_DEVICE_ROTATION_180) || defined(POINTING_DEVICE_ROTATION_270)
+    int8_t x = local_report.x, y = local_report.y;
+#    if defined(POINTING_DEVICE_ROTATION_90)
+    local_report.x = y;
+    local_report.y = -x;
+#    elif defined(POINTING_DEVICE_ROTATION_180)
+    local_report.x = -x;
+    local_report.y = -y;
+#    elif defined(POINTING_DEVICE_ROTATION_270)
+    local_report.x = -y;
+    local_report.y = x;
+#    else
+#        error "How the heck did you get here?!"
+#    endif
+#endif
+    // Support Inverting the X and Y Axises
+#if defined(POINTING_DEVICE_INVERT_X)
+    local_report.x = -local_report.x;
+#endif
+#if defined(POINTING_DEVICE_INVERT_Y)
+    local_report.y = -local_report.y;
+#endif
+
+    // allow kb to intercept and modify report
+    local_report = pointing_device_task_kb(local_report);
+    // combine with mouse report to ensure that the combined is sent correctly
+#ifdef MOUSEKEY_ENABLE
+    report_mouse_t mousekey_report = mousekey_get_report();
+    local_report.buttons           = local_report.buttons | mousekey_report.buttons;
+#endif
+#if defined(POINTING_DEVICE_COMBINED)
+    local_report.buttons = local_report.buttons | shared_mouse_report.buttons;
+#endif
+    pointing_device_set_report(local_report);
+    pointing_device_send();
+}

keyboards/handwired/tractyl_manuform/tractyl_manuform.c

@@ -99,20 +99,8 @@ void pointing_device_init_kb(void) {
 }
 
 report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) {
-    if (is_keyboard_left()) {
+    if (is_keyboard_master()) {
-        if (is_keyboard_master()) {
+        mouse_report = pointing_device_task_user(mouse_report);
-            transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(sync_mouse_report), &sync_mouse_report);
-            mouse_report.x = sync_mouse_report.x;
-            mouse_report.y = sync_mouse_report.y;
-            pointing_device_task_user(mouse_report);
-        }
-    } else {
-        if (is_keyboard_master()) {
-            pointing_device_task_user(mouse_report);
-        } else {
-            sync_mouse_report.x = mouse_report.x;
-            sync_mouse_report.y = mouse_report.y;
-        }
     }
     return mouse_report;
 }

keyboards/handwired/tractyl_manuform/tractyl_manuform.h

@@ -43,15 +43,6 @@ typedef struct {
     uint16_t device_cpi;
 } kb_config_data_t;
 
-__attribute__((aligned(16))) typedef struct {
-    int8_t x;
-    int8_t y;
-} kb_mouse_report_t;
-
-extern kb_mouse_report_t sync_mouse_report;
-
-void process_mouse(void);
-void process_mouse_user(report_mouse_t* mouse_report, int8_t x, int8_t y);
 void trackball_set_cpi(uint16_t cpi);
 void matrix_init_sub_kb(void);
 void matrix_scan_sub_kb(void);

keyboards/kb_elmo/vertex/config.h

@@ -0,0 +1,46 @@
+/*
+Copyright 2021 kb-elmo<[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xA68C
+#define PRODUCT_ID   0x6B47
+#define DEVICE_VER   0x0001
+#define MANUFACTURER kb_elmo
+#define PRODUCT      Vertex
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* Keyboard Matrix Assignments */
+#define MATRIX_ROW_PINS { D2, D4, B7, C6 }
+#define MATRIX_COL_PINS { C4, C7, D3, D5, B6, D6, B5, B0, B4, B1, B3, B2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/kb_elmo/vertex/info.json

@@ -0,0 +1,205 @@
+{
+    "keyboard_name": "vertex",
+    "url": "",
+    "maintainer": "kb-elmo",
+    "layouts": {
+        "LAYOUT_8keys": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":0, "y":1, "w":1.25},
+                {"x":1.25, "y":1},
+                {"x":2.25, "y":1},
+                {"x":3.25, "y":1},
+                {"x":4.25, "y":1},
+                {"x":5.25, "y":1},
+                {"x":6.25, "y":1},
+                {"x":7.25, "y":1},
+                {"x":8.25, "y":1},
+                {"x":9.25, "y":1},
+                {"x":10.25, "y":1},
+                {"x":11.25, "y":1, "w":1.75},
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2, "w":1.25},
+                {"x":0, "y":3, "w":1.5},
+                {"x":1.5, "y":3, "w":1.25},
+                {"x":2.75, "y":3, "w":1.25},
+                {"x":4, "y":3, "w":2.5},
+                {"x":6.5, "y":3, "w":2.5},
+                {"x":9, "y":3, "w":1.25},
+                {"x":10.25, "y":3, "w":1.25},
+                {"x":11.5, "y":3, "w":1.5}
+            ]
+        },
+        "LAYOUT_8keys_full_bs": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0, "w":2},
+                {"x":0, "y":1, "w":1.25},
+                {"x":1.25, "y":1},
+                {"x":2.25, "y":1},
+                {"x":3.25, "y":1},
+                {"x":4.25, "y":1},
+                {"x":5.25, "y":1},
+                {"x":6.25, "y":1},
+                {"x":7.25, "y":1},
+                {"x":8.25, "y":1},
+                {"x":9.25, "y":1},
+                {"x":10.25, "y":1},
+                {"x":11.25, "y":1, "w":1.75},
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2, "w":1.25},
+                {"x":0, "y":3, "w":1.5},
+                {"x":1.5, "y":3, "w":1.25},
+                {"x":2.75, "y":3, "w":1.25},
+                {"x":4, "y":3, "w":2.5},
+                {"x":6.5, "y":3, "w":2.5},
+                {"x":9, "y":3, "w":1.25},
+                {"x":10.25, "y":3, "w":1.25},
+                {"x":11.5, "y":3, "w":1.5}
+            ]
+        },
+        "LAYOUT_10keys": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":0, "y":1, "w":1.25},
+                {"x":1.25, "y":1},
+                {"x":2.25, "y":1},
+                {"x":3.25, "y":1},
+                {"x":4.25, "y":1},
+                {"x":5.25, "y":1},
+                {"x":6.25, "y":1},
+                {"x":7.25, "y":1},
+                {"x":8.25, "y":1},
+                {"x":9.25, "y":1},
+                {"x":10.25, "y":1},
+                {"x":11.25, "y":1, "w":1.75},
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2, "w":1.25},
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+                {"x":4, "y":3, "w":2.5},
+                {"x":6.5, "y":3, "w":2.5},
+                {"x":9, "y":3},
+                {"x":10, "y":3},
+                {"x":11, "y":3},
+                {"x":12, "y":3}
+            ]
+        },
+        "LAYOUT_10keys_full_bs": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0, "w":2},
+                {"x":0, "y":1, "w":1.25},
+                {"x":1.25, "y":1},
+                {"x":2.25, "y":1},
+                {"x":3.25, "y":1},
+                {"x":4.25, "y":1},
+                {"x":5.25, "y":1},
+                {"x":6.25, "y":1},
+                {"x":7.25, "y":1},
+                {"x":8.25, "y":1},
+                {"x":9.25, "y":1},
+                {"x":10.25, "y":1},
+                {"x":11.25, "y":1, "w":1.75},
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2, "w":1.25},
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+                {"x":4, "y":3, "w":2.5},
+                {"x":6.5, "y":3, "w":2.5},
+                {"x":9, "y":3},
+                {"x":10, "y":3},
+                {"x":11, "y":3},
+                {"x":12, "y":3}
+            ]
+        }
+    }
+}

keyboards/kb_elmo/vertex/keymaps/default/keymap.c

@@ -0,0 +1,37 @@
+/* Copyright 2021 kb-elmo<[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_8keys(
+        KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,  KC_BSPC,
+        KC_TAB,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,    KC_ENT,
+        KC_LSFT,     KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,    KC_SLSH,    MO(2),
+        KC_LCTL,    KC_LGUI,    KC_LALT,              KC_SPC,            MO(1),               KC_RALT,    KC_RGUI,  KC_RCTL
+    ),
+    [1] = LAYOUT_8keys(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,
+        KC_CAPS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT,    KC_BSLS,
+        KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPRV, KC_MNXT,   KC_MPLY,    KC_TRNS,
+        KC_TRNS,    KC_TRNS,    KC_TRNS,              KC_TRNS,           KC_TRNS,             KC_TRNS,    KC_TRNS,  KC_TRNS
+    ),
+    [2] = LAYOUT_8keys(
+        KC_GRV,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_TRNS, KC_PSCR,
+        KC_TRNS,   KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,     KC_TRNS,
+        KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,    KC_TRNS,
+        KC_TRNS,    KC_TRNS,    KC_TRNS,              KC_TRNS,           KC_TRNS,             KC_TRNS,    KC_TRNS,  KC_TRNS
+    )
+};

keyboards/kb_elmo/vertex/keymaps/via/keymap.c

@@ -0,0 +1,43 @@
+/* Copyright 2021 kb-elmo<[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_10keys(
+        KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,  KC_BSPC,
+        KC_TAB,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN,    KC_ENT,
+        KC_LSFT,     KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,    KC_SLSH,    MO(2),
+        KC_LCTL, KC_LGUI, KC_LGUI, KC_LALT,           KC_SPC,           MO(1),           KC_RALT, KC_RGUI, KC_RGUI, KC_RCTL
+    ),
+    [1] = LAYOUT_10keys(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,
+        KC_CAPS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT,    KC_BSLS,
+        KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPRV, KC_MNXT,   KC_MPLY,    KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS,          KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [2] = LAYOUT_10keys(
+        KC_GRV,  KC_HOME, KC_UP,   KC_END,  KC_PGUP, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_TRNS, KC_PSCR,
+        KC_TRNS,   KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,     KC_TRNS,
+        KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,    KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS,          KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+    [3] = LAYOUT_10keys(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,    KC_TRNS,
+        KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,   KC_TRNS,    KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,            KC_TRNS,          KC_TRNS,        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    )
+};

keyboards/kb_elmo/vertex/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/kb_elmo/vertex/readme.md

@@ -0,0 +1,25 @@
+# Vertex
+
+![vertex](https://i.imgur.com/drRZO54l.jpg)
+
+3D printed Vortex 40% inspired screwless exterior, top-mount keyboard
+
+* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
+* Hardware Supported: Vertex rev.1
+* Hardware Availability: [Open source project](https://github.com/kb-elmo/Vertex)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kb_elmo/vertex:default
+
+Flashing example for this keyboard:
+
+    make kb_elmo/vertex:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
+* **Physical reset button**: Briefly press the button labeled "Reset" on the back of the PCB
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available

keyboards/kb_elmo/vertex/rules.mk

@@ -0,0 +1,21 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output

keyboards/kb_elmo/vertex/vertex.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 kb-elmo<[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "vertex.h"

keyboards/kb_elmo/vertex/vertex.h

@@ -0,0 +1,69 @@
+/* Copyright 2021 kb-elmo<[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+#define LAYOUT_8keys( \
+    k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k311, \
+    k100,   k101, k102, k103, k104, k105, k106, k107, k108, k109, k110,     k111, \
+    k200,     k201, k202, k203, k204, k205, k206, k207, k208, k209, k210,   k211, \
+    k300,     k302,   k303,       k304,       k306,       k307,   k308,     k310  \
+) { \
+    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011 }, \
+    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111 }, \
+    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211 }, \
+    { k300, ____, k302, k303, k304, ____, k306, k307, k308, ____, k310, k311 }  \
+}
+
+#define LAYOUT_8keys_full_bs( \
+    k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010,    k011,    \
+    k100,   k101, k102, k103, k104, k105, k106, k107, k108, k109, k110,     k111, \
+    k200,     k201, k202, k203, k204, k205, k206, k207, k208, k209, k210,   k211, \
+    k300,     k302,   k303,       k304,       k306,       k307,   k308,     k310  \
+) { \
+    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011 }, \
+    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111 }, \
+    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211 }, \
+    { k300, ____, k302, k303, k304, ____, k306, k307, k308, ____, k310, ____ }  \
+}
+
+#define LAYOUT_10keys( \
+    k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k311, \
+    k100,   k101, k102, k103, k104, k105, k106, k107, k108, k109, k110,     k111, \
+    k200,     k201, k202, k203, k204, k205, k206, k207, k208, k209, k210,   k211, \
+    k300, k301, k302, k303,       k304,       k306,       k307, k308, k309, k310  \
+) { \
+    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011 }, \
+    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111 }, \
+    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211 }, \
+    { k300, k301, k302, k303, k304, ____, k306, k307, k308, k309, k310, k311 }  \
+}
+
+#define LAYOUT_10keys_full_bs( \
+    k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010,    k011,    \
+    k100,   k101, k102, k103, k104, k105, k106, k107, k108, k109, k110,     k111, \
+    k200,     k201, k202, k203, k204, k205, k206, k207, k208, k209, k210,   k211, \
+    k300, k301, k302, k303,       k304,       k306,       k307, k308, k309, k310  \
+) { \
+    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011 }, \
+    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111 }, \
+    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211 }, \
+    { k300, k301, k302, k303, k304, ____, k306, k307, k308, k309, k310, ____ }  \
+}

keyboards/kbdfans/odin/rgb/config.h

@@ -0,0 +1,90 @@
+/* Copyright 2021 Dztech
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "config_common.h"
+
+#define VENDOR_ID       0x4B42
+#define PRODUCT_ID      0x0102
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KBDFANS
+#define PRODUCT         ODIN_RGB
+
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 20
+
+#define MATRIX_ROW_PINS { A10, A9, A8, B14, B13, A2 }
+#define MATRIX_COL_PINS { A3, A4, A5, A6, A7, B0, B1, B2, B12, A15, B3, B4, B5, B6, B7, B8, C13, C14, C15, A0}
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW
+
+#define DEBOUNCE 5
+#define RGBLED_NUM 110
+#define DRIVER_LED_TOTAL 110
+#define RGB_DI_PIN B15
+
+#ifdef RGB_MATRIX_ENABLE
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
+#define RGB_MATRIX_KEYPRESSES 
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define ENABLE_RGB_MATRIX_ALPHAS_MODS
+#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_BREATHING
+#define ENABLE_RGB_MATRIX_BAND_SAT
+#define ENABLE_RGB_MATRIX_BAND_VAL
+#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
+#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
+#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
+#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+#define ENABLE_RGB_MATRIX_CYCLE_ALL
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#define ENABLE_RGB_MATRIX_DUAL_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#define ENABLE_RGB_MATRIX_RAINDROPS
+#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#define ENABLE_RGB_MATRIX_HUE_BREATHING
+#define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#define ENABLE_RGB_MATRIX_HUE_WAVE
+#define ENABLE_RGB_MATRIX_FRACTAL
+#define ENABLE_RGB_MATRIX_PIXEL_RAIN
+
+#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#define ENABLE_RGB_MATRIX_SPLASH
+#define ENABLE_RGB_MATRIX_MULTISPLASH
+#define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+
+
+#endif

keyboards/kbdfans/odin/rgb/info.json

@@ -0,0 +1,10 @@
+{
+    "keyboard_name": "ODIN_RGB", 
+    "url": "", 
+    "maintainer": "moyi4681", 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"x":16.5, "y":0}, {"x":17.5, "y":0}, {"x":18.5, "y":0}, {"x":19.5, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Num Lock", "x":16.5, "y":1.5}, {"label":"/", "x":17.5, "y":1.5}, {"label":"*", "x":18.5, "y":1.5}, {"label":"-", "x":19.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"7", "x":16.5, "y":2.5}, {"label":"8", "x":17.5, "y":2.5}, {"label":"9", "x":18.5, "y":2.5}, {"label":"+", "x":19.5, "y":2.5, "h":2}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":16.5, "y":3.5}, {"label":"5", "x":17.5, "y":3.5}, {"label":"6", "x":18.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"1", "x":16.5, "y":4.5}, {"label":"2", "x":17.5, "y":4.5}, {"label":"3", "x":18.5, "y":4.5}, {"label":"Enter", "x":19.5, "y":4.5, "h":2}, {"label":"\u2191", "x":15.25, "y":4.75}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":7}, {"label":"Alt", "x":10.75, "y":5.5, "w":1.5}, {"label":"Win", "x":12.25, "y":5.5, "w":1.5}, {"label":"0", "x":17.5, "y":5.5}, {"label":".", "x":18.5, "y":5.5}, {"label":"\u2190", "x":14.25, "y":5.75}, {"label":"\u2193", "x":15.25, "y":5.75}, {"label":"\u2192", "x":16.25, "y":5.75}]
+        }
+    }
+}

keyboards/kbdfans/odin/rgb/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2021 DZTECH <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] =LAYOUT_all(
+		KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_PGUP, KC_PGDN,  		
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_P7, KC_P8, KC_P9, KC_PPLS, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,  KC_P4, KC_P5, KC_P6, 
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT
+                        ),
+	[1]   =LAYOUT_all(
+		KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_PGUP, KC_PGDN,  		
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_P7, KC_P8, KC_P9, KC_PPLS, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,  KC_P4, KC_P5, KC_P6, 
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT),
+};

keyboards/kbdfans/odin/rgb/keymaps/via/config.h

@@ -0,0 +1,17 @@
+/* Copyright 2021 Dztech
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#define DYNAMIC_KEYMAP_LAYER_COUNT 2

keyboards/kbdfans/odin/rgb/keymaps/via/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2021 DZTECH <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] =LAYOUT_all(
+		KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_PGUP, KC_PGDN,  		
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_P7, KC_P8, KC_P9, KC_PPLS, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,  KC_P4, KC_P5, KC_P6, 
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT
+                        ),
+	[1]   =LAYOUT_all(
+		KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_PGUP, KC_PGDN,  		
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_P7, KC_P8, KC_P9, KC_PPLS, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,  KC_P4, KC_P5, KC_P6, 
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT),
+};

keyboards/kbdfans/odin/rgb/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/kbdfans/odin/rgb/readme.md

@@ -0,0 +1,21 @@
+# ODIN RGB
+
+A customizable HOTSWAP RGB keyboard.
+
+* Keyboard Maintainer: [moyi4681](https://github.com/moyi4681)
+* Hardware Supported: KBDFANS
+* Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kbdfans/odin/rgb:default
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix
+* **Physical reset button**:press and hold the button on the back of the PCB, then plugin to PC
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/odin/rgb/rgb.c

@@ -0,0 +1,59 @@
+/* Copyright 2021 Dztech
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rgb.h"
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = {
+{
+    { 0,  NO_LED, 1,   2,      3,      4,      NO_LED,  5,      6,      7,      8,  9,  10,     11, 12,     13,     14, 15, 16, 17 },
+    { 36, 35,     34,  33,     32,     31,     30,      29,     28,     27,     26, 25, 24,     23, NO_LED, 22,     21, 20, 19, 18 },
+    { 37, 38,     39,  40,     41,     42,     43,      44,     45,     46,     47, 48, 49,     50, NO_LED, 51,     52, 53, 54, 55 },
+    { 75, 74,     73,  72,     71,     70,     69,      68,     67,     66,     65,  64, NO_LED, 63, NO_LED, NO_LED, 58, 57, 56, NO_LED },
+    { 76, NO_LED, 77,  78,     79,     80,     81,      82,     83,     84,     85,  86, NO_LED, 87, NO_LED, 88,     89, 90, 91, 92 },
+    { 105,104,    103, NO_LED, NO_LED, NO_LED, 102,     NO_LED, NO_LED, NO_LED, NO_LED, 100, NO_LED,     98, 97,     96,     95, 94, 93, NO_LED }
+}, 
+{
+    {   12*0,  0 }, {  12*2,  0 }, {  12*3,  0 }, {  12*4,  0 }, {  12*5,  0 }, { 12*7,  0 }, { 12*8,  0 }, { 12*9,  0 }, { 12*10,  0 }, { 12*11,  0 },    { 12*12,  0 }, { 12*13,  0 }, { 12*14,  0 }, { 12*15,  0 }, { 12*16,  0 }, { 12*17,  0 }, { 12*18,  0 }, { 224,  0 },
+    
+    { 224,  14 }, { 12*18,  14 },  { 12*17,  14 }, { 12*16,  14 },{ 12*15,  14 },{ 12*13,  14 },  { 12*12,  14 },  { 12*11,  14 },  { 12*10,  14 }, { 12*9,  14 },{ 12*8, 14},{ 12*7,  14},  {  12*6, 14 },  {  12*5,  14 }, {  12*4,  14 },{  12*3,  14 },{  12*2,  14 }, {12,  14},  {   12*0,  14 }, 
+      
+    {   12*0,  26.8 }, {12,  26.8}, {  12*2,  26.8 }, {  12*3,  26.8 }, {  12*4,  26.8 }, {  12*5,  26.8 }, {  12*6, 26.8 }, { 12*7,  26.8}, { 12*8, 26.8}, { 12*9,  26.8 }, { 12*10,  26.8 }, { 12*11,  26.8 },    { 12*12,  26.8 }, { 12*13,  26.8 },  { 12*15,  26.8 }, { 12*16,  26.8 }, { 12*17,  26.8 }, { 12*18,  26.8 }, { 224,  33.2 },
+
+ { 12*18,  39.6 }, { 12*17,  39.6 },{ 12*16,  39.6 }, {224,0},{0,0},{0,64},{224,64 },   { 12*13,  39.6 }, { 12*11,  39.6 }, { 12*10,  39.6 }, { 12*9,  39.6 },{ 12*8, 39.6},  { 12*7,  39.6},  {  12*6, 39.6 },  {  12*5,  39.6 },{  12*4,  39.6 },{  12*3,  39.6 },  {  12*2,  39.6 }, {12,  39.6},  {   12*0,  39.6 }, 
+    
+    {   12*0,  52 },{  12*2,  52 }, {  12*3,  52 }, {  12*4,  52 }, {  12*5,  52 }, {  12*6, 52 }, { 12*7,  52}, { 12*8, 52}, { 12*9,  52 }, { 12*10,  52 }, { 12*11,  52 },   { 12*13,  52 },  { 12*15,  52 }, { 12*16,  52 }, { 12*17,  52 }, { 12*18,  52 }, { 224,  58 },
+    
+ { 12*18,  64 },  { 12*17,  64 },  { 12*16,  64 },  { 12*15,  64 },{ 12*14,  64 }, { 12*13,  64 },  { 12*11,  64 },   {  12*6, 64 }, {  12*2,  64 }, {12,  64},    {   12*0,  64 }
+},
+{           
+4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
+4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
+4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
+4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
+4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
+4,4,4,4,4,4,4,4,4,4,4,4
+}};
+
+__attribute__ ((weak))
+void rgb_matrix_indicators_user(void) {
+    if (host_keyboard_led_state().caps_lock) {
+        rgb_matrix_set_color(75, 0xFF, 0xFF, 0xFF);
+    }
+    if (host_keyboard_led_state().num_lock) {
+        rgb_matrix_set_color(21, 0xFF, 0xFF, 0xFF);
+    }    
+}
+#endif

keyboards/kbdfans/odin/rgb/rgb.h

@@ -0,0 +1,35 @@
+/* Copyright 2021 Dztech
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    k00,      k02, k03, k04, k05,      k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, k0H, k0I, k0J, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D,      k1F, k1G, k1H, k1I, k1J, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,      k2F, k2G, k2H, k2I, k2J, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D,           k3G, k3H, k3I,      \
+    k40,      k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B,      k4D,      k4F, k4G, k4H, k4I, k4J, \
+    k50, k51, k52,                k56,                     k5B,      k5D, k5E, k5F, k5G, k5H, k5I       \
+) \
+{ \
+    {k00, KC_NO, k02, k03,   k04,   k05,   KC_NO, k07,   k08,   k09,   k0A,   k0B, k0C,   k0D, k0E,   k0F,   k0G, k0H, k0I, k0J  }, \
+    {k10, k11,   k12, k13,   k14,   k15,   k16,   k17,   k18,   k19,   k1A,   k1B, k1C,   k1D, KC_NO, k1F,   k1G, k1H, k1I, k1J  }, \
+    {k20, k21,   k22, k23,   k24,   k25,   k26,   k27,   k28,   k29,   k2A,   k2B, k2C,   k2D, KC_NO, k2F,   k2G, k2H, k2I, k2J  }, \
+    {k30, k31,   k32, k33,   k34,   k35,   k36,   k37,   k38,   k39,   k3A,   k3B, KC_NO, k3D, KC_NO, KC_NO, k3G, k3H, k3I, KC_NO}, \
+    {k40, KC_NO, k42, k43,   k44,   k45,   k46,   k47,   k48,   k49,   k4A,   k4B, KC_NO, k4D, KC_NO, k4F,   k4G, k4H, k4I, k4J  }, \
+    {k50, k51,   k52, KC_NO, KC_NO, KC_NO, k56,   KC_NO, KC_NO, KC_NO, KC_NO, k5B, KC_NO, k5D, k5E,   k5F,   k5G, k5H, k5I, KC_NO}  \
+}

keyboards/kbdfans/odin/rgb/rules.mk

@@ -0,0 +1,26 @@
+# MCU name
+MCU = STM32F072
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/kbdfans/odin/soldered/config.h

@@ -0,0 +1,57 @@
+/* Copyright 2021 Dztech
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "config_common.h"
+
+#define VENDOR_ID       0x4B42
+#define PRODUCT_ID      0x0101
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KBDFANS
+#define PRODUCT         ODIN_SOLDERED
+
+
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 20
+
+#define MATRIX_ROW_PINS { A10, A9, A8, B14, B13, A2 }
+#define MATRIX_COL_PINS { A3, A4, A5, A6, A7, B0, B1, B2, B12, A15, B3, B4, B5, B6, B7, B8, C13, C14, C15, A0}
+#define UNUSED_PINS
+
+#define LED_NUM_LOCK_PIN B9
+#define LED_CAPS_LOCK_PIN B10
+#define LED_PIN_ON_STATE 0
+
+#define DIODE_DIRECTION COL2ROW
+#define DEBOUNCE 15
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+#define RGB_DI_PIN B15
+#ifdef RGB_DI_PIN
+#define RGBLED_NUM 4
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_EFFECT_RAINBOW_MOOD + 8) 
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#define RGBLIGHT_LIMIT_VAL 180
+#define RGBLIGHT_SLEEP
+#endif
+#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2

keyboards/kbdfans/odin/soldered/info.json

@@ -0,0 +1,10 @@
+{
+    "keyboard_name": "ODIN_SOLDERED", 
+    "url": "", 
+    "maintainer": "moyi4681", 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"x":16.5, "y":0}, {"x":17.5, "y":0}, {"x":18.5, "y":0}, {"x":19.5, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"x":13, "y":1.5}, {"label":"Backspace", "x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Num Lock", "x":16.5, "y":1.5}, {"label":"/", "x":17.5, "y":1.5}, {"label":"*", "x":18.5, "y":1.5}, {"label":"-", "x":19.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"7", "x":16.5, "y":2.5}, {"label":"8", "x":17.5, "y":2.5}, {"label":"9", "x":18.5, "y":2.5}, {"label":"+", "x":19.5, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":16.5, "y":3.5}, {"label":"5", "x":17.5, "y":3.5}, {"label":"6", "x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"1", "x":16.5, "y":4.5}, {"label":"2", "x":17.5, "y":4.5}, {"label":"3", "x":18.5, "y":4.5}, {"label":"Enter", "x":19.5, "y":4.5}, {"label":"\u2191", "x":15.25, "y":4.75}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"x":10, "y":5.5}, {"x":11, "y":5.5}, {"x":12, "y":5.5}, {"x":13, "y":5.5}, {"label":"0", "x":17.5, "y":5.5}, {"label":".", "x":18.5, "y":5.5}, {"x":19.5, "y":5.5}, {"label":"\u2190", "x":14.25, "y":5.75}, {"label":"\u2193", "x":15.25, "y":5.75}, {"label":"\u2192", "x":16.25, "y":5.75}]
+        }
+    }
+}

keyboards/kbdfans/odin/soldered/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2021 DZTECH <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] =LAYOUT_all(
+		KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_PGUP, KC_PGDN, 		
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL,KC_BSPC,  KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, KC_P7, KC_P8, KC_P9, KC_PPLS, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,  KC_P4, KC_P5, KC_P6, KC_PPLS,
+		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,KC_END, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT,KC_PENT
+                        ),
+	[1]   =LAYOUT_all(
+		KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PAUS, KC_PAUS, KC_SPC, KC_SPC, KC_SPC, 		
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_P7, KC_P8, KC_P9, KC_PPLS, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,  KC_P4, KC_P5, KC_P6, KC_PPLS, 
+		KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,KC_INS, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_MENU, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT,KC_PENT),
+};

keyboards/kbdfans/odin/soldered/keymaps/via/config.h

@@ -0,0 +1,17 @@
+/* Copyright 2021 Dztech
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+#define DYNAMIC_KEYMAP_LAYER_COUNT 2

keyboards/kbdfans/odin/soldered/keymaps/via/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2021 DZTECH <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] =LAYOUT_all(
+		KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_PGUP, KC_PGDN, 		
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL,KC_BSPC,  KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, KC_P7, KC_P8, KC_P9, KC_PPLS, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,  KC_P4, KC_P5, KC_P6, KC_PPLS,
+		KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,KC_END, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT,KC_PENT
+                        ),
+	[1]   =LAYOUT_all(
+		KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PAUS, KC_PAUS, KC_SPC, KC_SPC, KC_SPC, 		
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+		KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_P7, KC_P8, KC_P9, KC_PPLS, 
+		KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,  KC_P4, KC_P5, KC_P6, KC_PPLS, 
+		KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,KC_INS, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, 
+		KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_MENU, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT,KC_PENT),
+};

keyboards/kbdfans/odin/soldered/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/kbdfans/odin/soldered/readme.md

@@ -0,0 +1,21 @@
+# ODIN SOLDERED
+
+A customizable soldered keyboard.
+
+* Keyboard Maintainer: [moyi4681](https://github.com/moyi4681)
+* Hardware Supported: KBDFANS
+* Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kbdfans/odin/soldered:default
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix
+* **Physical reset button**:press and hold the button on the back of the PCB, then plugin to PC
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/kbdfans/odin/soldered/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = STM32F072
+
+# Bootloader selection
+BOOTLOADER = stm32-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE

keyboards/kbdfans/odin/soldered/soldered.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 Geekboards ltd. (geekboards.ru / geekboards.de)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "soldered.h"

keyboards/kbdfans/odin/soldered/soldered.h

@@ -0,0 +1,35 @@
+ /* Copyright 2021 DZTECH
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    k00,      k02, k03, k04, k05,      k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, k0H, k0I, k0J, \
+    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F, k1G, k1H, k1I, k1J, \
+    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D,      k2F, k2G, k2H, k2I, k2J, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D,           k3G, k3H, k3I, k3J, \
+    k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B,      k4D, k4E, k4F, k4G, k4H, k4I, k4J, \
+    k50, k51, k52,                k56,                k5A, k5B, k5C, k5D, k5E, k5F, k5G, k5H, k5I, k5J  \
+) \
+{ \
+    {k00, KC_NO, k02, k03,   k04,   k05,   KC_NO, k07,   k08,   k09,   k0A, k0B, k0C,   k0D, k0E,   k0F,   k0G, k0H, k0I, k0J  }, \
+    {k10, k11,   k12, k13,   k14,   k15,   k16,   k17,   k18,   k19,   k1A, k1B, k1C,   k1D, k1E,   k1F,   k1G, k1H, k1I, k1J  }, \
+    {k20, k21,   k22, k23,   k24,   k25,   k26,   k27,   k28,   k29,   k2A, k2B, k2C,   k2D, KC_NO, k2F,   k2G, k2H, k2I, k2J  }, \
+    {k30, k31,   k32, k33,   k34,   k35,   k36,   k37,   k38,   k39,   k3A, k3B, KC_NO, k3D, KC_NO, KC_NO, k3G, k3H, k3I, k3J  }, \
+    {k40, k41,   k42, k43,   k44,   k45,   k46,   k47,   k48,   k49,   k4A, k4B, KC_NO, k4D, k4E,   k4F,   k4G, k4H, k4I, k4J  }, \
+    {k50, k51,   k52, KC_NO, KC_NO, KC_NO, k56,   KC_NO, KC_NO, KC_NO, k5A, k5B, k5C,   k5D, k5E,   k5F,   k5G, k5H, k5I, k5J  }  \
+}

keyboards/keebio/iris/keymaps/mnil/keymap.c

@@ -62,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                   //├────────┼────────┼────────┼────────┼────────┼────────┤                           ├────────┼────────┼────────┼────────┼────────┼────────┤
                      KC_TRNS, SE_LCBR, SE_RCBR, SE_LPRN, SE_RPRN, KC_NO,                               SE_PLUS, S(KC_1), S(KC_2), S(KC_3), SE_AMPR, KC_TRNS,
                   //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐         ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
-                     KC_TRNS, M_TILD,  M_CIRC,  SE_LESS, SE_GRTR, KC_NO,   KC_TRNS,           KC_TRNS, SE_APOS, SE_SLSH, SE_BSLS, SE_ASTR, M_BTCK,  KC_TRNS,
+                     KC_TRNS, M_TILD,  M_CIRC,  SE_LABK, SE_RABK, KC_NO,   KC_TRNS,           KC_TRNS, SE_QUOT, SE_SLSH, SE_BSLS, SE_ASTR, M_BTCK,  KC_TRNS,
                   //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘         └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
                                                     KC_TRNS, KC_TRNS, KC_TRNS,                    KC_TRNS, KC_TRNS, KC_TRNS ),
                   //                               └────────┴────────┴────────┘                  └────────┴────────┴────────┘

keyboards/keysofkings/twokey/config.h

@@ -35,10 +35,9 @@
 #define UNUSED_PINS
 
 
-#define ENCODERS_PAD_A { E6 }
+#define ENCODERS_PAD_A { D7 }
-#define ENCODERS_PAD_B { D7 }
+#define ENCODERS_PAD_B { E6 }
 #define ENCODER_RESOLUTION 1
-#define ENCODER_DIRECTION_FLIP
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW

keyboards/kprepublic/bm60hsrgb_poker/keymaps/carlosala/config.h

@@ -0,0 +1,6 @@
+// Copiright 2021 Carlo Sala (@carlosala)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define UNICODE_SELECTED_MODES UC_LNX

keyboards/kprepublic/bm60hsrgb_poker/keymaps/carlosala/keymap.c

@@ -0,0 +1,25 @@
+// Copiright 2021 Carlo Sala (@carlosala)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_60_ansi(
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
+        LT(2, KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, RSFT_T(KC_CAPS),
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL),
+    [1] = LAYOUT_60_ansi(
+        KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,
+        KC_TRNS, RGB_MOD, RGB_SPI, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_HOME, KC_END, KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, RGB_RMOD, RGB_SPD, RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, RGB_TOG, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_BRID, KC_BRIU, KC_TRNS, KC_TRNS, KC_TRNS, LALT(KC_F4),
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+    [2] = LAYOUT_60_ansi(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, UC(0x00B7), KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET)
+};