Fix overrun in oled_write_raw when not at (0, 0) (#13204)

Co-authored-by: ridingqwerty <[email protected]>
Co-authored-by: Ryan <[email protected]>

bootloader.mk

@@ -90,7 +90,7 @@ ifeq ($(strip $(BOOTLOADER)), USBasp)
 endif
 ifeq ($(strip $(BOOTLOADER)), lufa-ms)
     OPT_DEFS += -DBOOTLOADER_MS
-    BOOTLOADER_SIZE = 6144
+    BOOTLOADER_SIZE ?= 8192
     FIRMWARE_FORMAT = bin
 cpfirmware: lufa_warning
 .INTERMEDIATE: lufa_warning

docs/feature_led_matrix.md

@@ -67,6 +67,8 @@ Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet]
 
 ---
 
+## Common Configuration :id=common-configuration
+
 From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example:
 
 ```c

docs/feature_rgb_matrix.md

@@ -229,6 +229,8 @@ Configure the hardware via your `config.h`:
 
 ---
 
+## Common Configuration :id=common-configuration
+
 From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example:
 
 ```c

drivers/oled/oled_driver.c

@@ -491,8 +491,9 @@ void oled_write_raw(const char *data, uint16_t size) {
     uint16_t cursor_start_index = oled_cursor - &oled_buffer[0];
     if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index;
     for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) {
-        if (oled_buffer[i] == data[i]) continue;
+        uint8_t c = *data++;
-        oled_buffer[i] = data[i];
+        if (oled_buffer[i] == c) continue;
+        oled_buffer[i] = c;
         oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
     }
 }

keyboards/anavi/macropad2/keymaps/binary/keymap.c

@@ -0,0 +1,30 @@
+/* Copyright 2021 Leon Anavi <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT(
+    KC_0,  KC_1
+  )
+};
+
+const uint16_t PROGMEM test_combo[] = {KC_0, KC_1, COMBO_END};
+combo_t key_combos[COMBO_COUNT] = {COMBO_ACTION(test_combo)};
+
+void process_combo_event(uint16_t combo_index, bool pressed) {
+	backlight_step();
+}

keyboards/anavi/macropad2/keymaps/binary/rules.mk

@@ -0,0 +1 @@
+COMBO_ENABLE = yes

keyboards/babyv/keymaps/melonbred/keymap.c

@@ -0,0 +1,62 @@
+/* Copyright 2020 melonbred
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    LAYER0,
+    LAYER1,
+    LAYER2,
+};
+
+
+// Tap Dance Declarations
+enum {
+  TD_M_D = 0,
+  TD_P_M
+};
+  
+// Tap Dance Definition
+qk_tap_dance_action_t tap_dance_actions[] = {
+  //Tap once for minus, tap twice for divide
+  [TD_M_D] = ACTION_TAP_DANCE_DOUBLE(KC_PMNS, KC_PSLS),
+  //Tap once for plus, tap twice for multiply
+  [TD_P_M] = ACTION_TAP_DANCE_DOUBLE(KC_PPLS, KC_PAST)
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+   [LAYER0] = LAYOUT_2u(
+        KC_ESC,        KC_Q,    KC_W,    KC_E,      KC_R,       KC_T,    KC_Y,    KC_U,    KC_I,      KC_O,     KC_P,    KC_BSPC,
+        CTL_T(KC_TAB), KC_A,    KC_S,    KC_D,      KC_F,       KC_G,    KC_H,    KC_J,    KC_K,      KC_L,     KC_SCLN, KC_ENT, 
+        KC_LSFT,       KC_Z,    KC_X,    KC_C,      KC_V,       KC_B,    KC_N,    KC_M,    KC_COMM,   KC_DOT,   KC_SLSH, KC_RSFT,
+        MO(LAYER2),                      KC_LALT,   LT(LAYER1, KC_SPC),           KC_SPC,  KC_RALT,                      KC_LGUI
+    ),
+
+   [LAYER1] = LAYOUT_2u(
+        KC_GRV,  KC_QUOT, _______, KC_UP,   _______, _______, KC_7, KC_8, KC_9, KC_PMNS, KC_PSLS, KC_DEL,
+        KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_4, KC_5, KC_6, KC_PPLS, KC_PAST, KC_ENT,
+        KC_LSFT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, KC_1, KC_2, KC_3, XXXXXXX, XXXXXXX, KC_RSFT,
+        XXXXXXX,                   _______, _______,                   KC_0,       KC_PDOT,       _______
+    ),
+
+    [LAYER2] = LAYOUT_2u(
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+        KC_VOLU, KC_MPLY, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, 
+        KC_VOLD, KC_MUTE, XXXXXXX, XXXXXXX, XXXXXXX, RESET,   XXXXXXX, XXXXXXX, KC_RCTL, KC_RALT, KC_DEL,  XXXXXXX, 
+        _______,                   KC_NLCK, XXXXXXX,                   XXXXXXX, XXXXXXX,                   XXXXXXX
+    ),
+};

keyboards/bm40hsrgb/config.h

@@ -50,6 +50,6 @@
 #ifdef RGB_DI_PIN
     #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
 #endif
-#ifdef RGB_MATRIX_ENABLE
+#ifndef RGB_DISABLE_WHEN_USB_SUSPENDED
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
 #endif

keyboards/buildakb/potato65hs/potato65hs.h

@@ -22,12 +22,12 @@
     K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
     K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
     K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,       K213, K214, \
-    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310,       K311, K313, K314, \
+    K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
     K400, K401, K402, K403,                               K409, K410,       K411, K413, K414  \
 ) { \
     { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
     { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
     { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  KC_NO, K213,  K214 }, \
-    { K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  KC_NO, K311,  K313,  K314 }, \
+    { K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
     { K400,  K401,  K402,  K403,  KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K409,  K410,  KC_NO, K411,  K413,  K414 }  \
 }

keyboards/gray_studio/cod67/rules.mk

@@ -11,6 +11,9 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = lufa-ms
 
+# This board uses the older unsafe 6k version of lufa-ms
+BOOTLOADER_SIZE = 6144
+
 # Build Options
 #   change yes to no to disable
 #

keyboards/keebio/iris/keymaps/compilation-error/config.h

@@ -0,0 +1,21 @@
+/*
+Copyright 2017 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// #define USE_I2C
+#define EE_HANDS

keyboards/keebio/iris/keymaps/compilation-error/keymap.c

@@ -0,0 +1,149 @@
+ /* Copyright 2021 Romeet Chhabra 
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#include QMK_KEYBOARD_H
+
+
+enum custom_layers {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                               KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                               KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     LALT_T(KC_ESC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                               KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_MUTE,           KC_PSCR,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+                                    KC_LGUI, LOWER,   KC_SPC,                    KC_ENT,  RAISE,   KC_LCTL
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+
+  [_LOWER] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     RGB_TOG, _______, KC_BTN3,   _______, KC_LBRC,  KC_RBRC,                            KC_EQL, KC_P7, KC_P8, KC_P9, KC_PSLS, KC_DEL,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_BTN4, KC_BTN1, KC_MS_U, KC_BTN2, KC_LCBR, KC_RCBR,                            KC_PLUS,  KC_P4,   KC_P5,   KC_P6,  KC_PAST,  _______,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_BTN5,  KC_MS_L, KC_MS_D, KC_MS_R, KC_LT,   KC_GT,                            KC_MINS, KC_P1,   KC_P2,   KC_P3,   KC_PMNS, _______,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______, _______, _______, _______, _______, _______, _______,          _______, KC_UNDS, KC_P0,   KC_PDOT,   KC_PENT,   KC_PPLS, _______,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+                                    _______, _______, _______,                    _______,  MO(_ADJUST), _______
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+
+  [_RAISE] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_F12,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                              KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     _______, _______, _______,   _______, _______,  _______,                            KC_LBRC, KC_LCBR, KC_LT, KC_GT, KC_RCBR, KC_RBRC,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     _______, _______, _______, _______, _______, _______,                            KC_PGUP,  KC_MINS, KC_UNDS, KC_EQL, KC_PLUS, KC_PGDN,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______, _______, _______, _______, _______, _______, _______,          _______, KC_HOME, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_END,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+                                    _______, MO(_ADJUST), _______,                   _______, _______, _______
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+
+  [_ADJUST] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_F12,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                              KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     RGB_TOG, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                            KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     RGB_MOD, KC_MPRV, KC_MNXT, KC_VOLU, KC_PGUP, KC_UNDS,                            KC_EQL,  KC_HOME, RGB_HUI, RGB_SAI, RGB_VAI, _______,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_MUTE, KC_MSTP, KC_MPLY, KC_VOLD, KC_PGDN, KC_MINS, RESET,          EEP_RST, KC_PLUS, KC_END,  RGB_HUD, RGB_SAD, RGB_VAD, _______,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+                                    _______, _______, _______,                   _______, _______, _______
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+bool encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    }
+    else if (index == 1) {
+        if (clockwise) {
+            tap_code(KC_WH_D);
+        } else {
+            tap_code(KC_WH_U);
+        }
+    }
+    return true;
+}

keyboards/keebio/iris/keymaps/compilation-error/rules.mk

@@ -0,0 +1 @@
+MOUSEKEY_ENABLE = yes        # Mouse keys

keyboards/mb44/config.h

@@ -0,0 +1,61 @@
+/*
+Copyright 2021 melonbred
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x6d62
+#define PRODUCT_ID 0x6d62
+#define DEVICE_VER 0x0001
+#define MANUFACTURER melonbred
+
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D1, D6, D5, D4 }
+#define MATRIX_COL_PINS { C4, C5, C6, C7, B7, B6, B5, B4, B3, B2, B1, B0 }
+#define UNUSED_PINS { C2 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*Encoder Definition*/
+#define ENCODERS_PAD_A { D3 }
+#define ENCODERS_PAD_B { D2 }
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+

keyboards/mb44/info.json

@@ -0,0 +1,202 @@
+{
+    "keyboard_name": "MB-44",
+    "url": "",
+    "maintainer": "melonbred",
+    "width": 3,
+    "height": 2,
+    "layouts": {
+        "LAYOUT_default": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0, "w":1.75},
+                {"x":0, "y":1, "w":1.25},
+                {"x":1.25, "y":1},
+                {"x":2.25, "y":1},
+                {"x":3.25, "y":1},
+                {"x":4.25, "y":1},
+                {"x":5.25, "y":1},
+                {"x":6.25, "y":1},
+                {"x":7.25, "y":1},
+                {"x":8.25, "y":1},
+                {"x":9.25, "y":1},
+                {"x":10.25, "y":1},
+                {"x":11.25, "y":1, "w":1.5},
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3, "w":6.25},
+                {"x":9.75, "y":3},
+                {"x":10.75, "y":3},
+                {"x":11.75, "y":3}
+            ]
+        },
+        "LAYOUT_2u_split": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0, "w":1.75},
+                {"x":0, "y":1, "w":1.25},
+                {"x":1.25, "y":1},
+                {"x":2.25, "y":1},
+                {"x":3.25, "y":1},
+                {"x":4.25, "y":1},
+                {"x":5.25, "y":1},
+                {"x":6.25, "y":1},
+                {"x":7.25, "y":1},
+                {"x":8.25, "y":1},
+                {"x":9.25, "y":1},
+                {"x":10.25, "y":1},
+                {"x":11.25, "y":1, "w":1.5},
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":0, "y":3},
+                {"x":1, "y":3, "w":1.25},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3, "w":2.25},
+                {"x":5.5, "y":3},
+                {"x":6.5, "y":3, "w":2.75},
+                {"x":9.75, "y":3},
+                {"x":10.75, "y":3},
+                {"x":11.75, "y":3}
+            ]
+        },
+        "LAYOUT_2u1u_split": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0, "w":1.75},
+                {"x":0, "y":1, "w":1.25},
+                {"x":1.25, "y":1},
+                {"x":2.25, "y":1},
+                {"x":3.25, "y":1},
+                {"x":4.25, "y":1},
+                {"x":5.25, "y":1},
+                {"x":6.25, "y":1},
+                {"x":7.25, "y":1},
+                {"x":8.25, "y":1},
+                {"x":9.25, "y":1},
+                {"x":10.25, "y":1},
+                {"x":11.25, "y":1, "w":1.5},
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":0, "y":3},
+                {"x":1, "y":3, "w":1.25},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3, "w":2.75},
+                {"x":6, "y":3, "w":2.25},
+                {"x":8.25, "y":3},
+                {"x":9.75, "y":3},
+                {"x":10.75, "y":3},
+                {"x":11.75, "y":3}
+            ]
+        },
+        "LAYOUT_3u_split": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0, "w":1.75},
+                {"x":0, "y":1, "w":1.25},
+                {"x":1.25, "y":1},
+                {"x":2.25, "y":1},
+                {"x":3.25, "y":1},
+                {"x":4.25, "y":1},
+                {"x":5.25, "y":1},
+                {"x":6.25, "y":1},
+                {"x":7.25, "y":1},
+                {"x":8.25, "y":1},
+                {"x":9.25, "y":1},
+                {"x":10.25, "y":1},
+                {"x":11.25, "y":1, "w":1.5},
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":0, "y":3},
+                {"x":1, "y":3, "w":1.25},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3, "w":3},
+                {"x":6.25, "y":3, "w":3},
+                {"x":9.75, "y":3},
+                {"x":10.75, "y":3},
+                {"x":11.75, "y":3}
+            ]
+        }
+    }
+}

keyboards/mb44/keymaps/2u1u_space/keymap.c

@@ -0,0 +1,59 @@
+/* Copyright 2020 melonbred
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _LAYER1,
+    _LAYER2
+
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT_2u1u_space(
+        KC_ESC,        KC_Q,    KC_W,    KC_E,                KC_R, KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+        CTL_T(KC_TAB), KC_A,    KC_S,    KC_D,                KC_F, KC_G,    KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
+        KC_LSFT,       KC_Z,    KC_X,    KC_C,                KC_V, KC_B,    KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_UP,   KC_SLSH,
+        MO(_LAYER2),   KC_LGUI, KC_LALT, LT(_LAYER1, KC_SPC),       KC_RALT, KC_SPC,                   KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_LAYER1] = LAYOUT_2u1u_space(
+        KC_GRV,  KC_QUOT, _______, KC_UP,   _______, _______, _______, _______, KC_7, KC_8,    KC_9, KC_DEL,
+        KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_PSLS, KC_PMNS, KC_4, KC_5,    KC_6, KC_ENT,
+        KC_LSFT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2,    KC_3, KC_RSFT,
+        _______, KC_LGUI, KC_LALT, XXXXXXX,          KC_RALT, KC_SPC,                 KC_0, KC_PDOT, XXXXXXX 
+    ),
+
+    [_LAYER2] = LAYOUT_2u1u_space(
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_6,    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
+        _______, XXXXXXX, XXXXXXX, XXXXXXX,          XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX
+    ),
+};
+
+// Rotary Encoder Functions
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            tap_code(KC_VOLD);
+        } else {
+            tap_code(KC_VOLU);
+        }
+    }
+}

keyboards/mb44/keymaps/2u_space/keymap.c

@@ -0,0 +1,59 @@
+/* Copyright 2020 melonbred
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _LAYER1,
+    _LAYER2
+
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT_2u_space(
+        KC_ESC,        KC_Q,    KC_W,    KC_E,                KC_R, KC_T,    KC_Y,   KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC,
+        CTL_T(KC_TAB), KC_A,    KC_S,    KC_D,                KC_F, KC_G,    KC_H,   KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
+        KC_LSFT,       KC_Z,    KC_X,    KC_C,                KC_V, KC_B,    KC_N,   KC_M,    KC_COMM, KC_DOT,  KC_UP,   KC_SLSH,
+        MO(_LAYER2),   KC_LGUI, KC_LALT, LT(_LAYER1, KC_SPC),                KC_SPC, KC_RALT,          KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_LAYER1] = LAYOUT_2u_space(
+        KC_GRV,  KC_QUOT, _______, KC_UP,   _______, _______, _______, _______, KC_7, KC_8,    KC_9, KC_DEL,
+        KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_PSLS, KC_PMNS, KC_4, KC_5,    KC_6, KC_ENT,
+        KC_LSFT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2,    KC_3, KC_RSFT,
+        _______, KC_LGUI, KC_LALT, XXXXXXX,                   KC_SPC,  KC_RALT,       KC_0, KC_PDOT, XXXXXXX 
+    ),
+
+    [_LAYER2] = LAYOUT_2u_space(
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_6,    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
+        _______, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX,          XXXXXXX, XXXXXXX, XXXXXXX
+    ),
+};
+
+// Rotary Encoder Functions
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            tap_code(KC_VOLD);
+        } else {
+            tap_code(KC_VOLU);
+        }
+    }
+}

keyboards/mb44/keymaps/3u_space/keymap.c

@@ -0,0 +1,67 @@
+/* Copyright 2020 melonbred
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _LAYER1,
+    _LAYER2,
+    _LAYER3
+
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT_3u_space(
+        KC_ESC,        KC_Q,    KC_W,    KC_E,                KC_R, KC_T, KC_Y,   KC_U,        KC_I,    KC_O,    KC_P,    KC_BSPC,
+        CTL_T(KC_TAB), KC_A,    KC_S,    KC_D,                KC_F, KC_G, KC_H,   KC_J,        KC_K,    KC_L,    KC_SCLN, KC_ENT,
+        KC_LSFT,       KC_Z,    KC_X,    KC_C,                KC_V, KC_B, KC_N,   KC_M,        KC_COMM, KC_DOT,  KC_UP,   KC_SLSH,
+        MO(_LAYER2),   KC_LGUI, KC_LALT, LT(_LAYER1, KC_SPC),             LT(_LAYER3, KC_SPC),          KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_LAYER1] = LAYOUT_3u_space(
+        KC_GRV,  KC_QUOT, XXXXXXX, KC_UP,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_7, KC_8, KC_9,    KC_DEL,
+        KC_CAPS, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, KC_PSLS, KC_PMNS, KC_4, KC_5, KC_6,    KC_ENT,
+        KC_LSFT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2, KC_3,    KC_RSFT,
+        XXXXXXX, KC_LGUI, KC_LALT, _______,                   XXXXXXX,                KC_0, KC_PDOT, KC_PEQL
+    ),
+
+    [_LAYER2] = LAYOUT_3u_space(
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_6,    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,   XXXXXXX, XXXXXXX, KC_RCTL, KC_RALT, KC_DEL,  KC_VOLD,
+        XXXXXXX, _______, XXXXXXX, XXXXXXX,                   XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX
+    ),
+
+    [_LAYER3] = LAYOUT_3u_space(
+        KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS,
+        XXXXXXX, KC_P1,   KC_P2,   KC_P3,   KC_P4,   KC_P5,   KC_P6,   KC_P7,   KC_P8,   KC_P9,   KC_P0,   _______,
+        _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______,
+        _______, XXXXXXX, XXXXXXX, XXXXXXX,                   _______,                   XXXXXXX, XXXXXXX, XXXXXXX
+    ),
+};
+
+// Rotary Encoder Functions
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            tap_code(KC_VOLD);
+        } else {
+            tap_code(KC_VOLU);
+        }
+    }
+}

keyboards/mb44/keymaps/default/keymap.c

@@ -0,0 +1,61 @@
+/* Copyright 2020 melonbred
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _LAYER1,
+    _LAYER2
+
+};
+
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT_default(
+        KC_ESC,        KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y,          KC_U, KC_I,    KC_O,    KC_P,    KC_BSPC,
+        CTL_T(KC_TAB), KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H,          KC_J, KC_K,    KC_L,    KC_SCLN, KC_ENT,
+        KC_LSFT,       KC_Z,    KC_X,    KC_C, KC_V, KC_B, KC_N,          KC_M, KC_COMM, KC_DOT,  KC_UP,   KC_SLSH,
+        MO(_LAYER2),   KC_LGUI, KC_LALT,             LT(_LAYER1, KC_SPC),                KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+    [_LAYER1] = LAYOUT_default(
+        KC_GRV,  KC_QUOT, _______, KC_UP,   _______, _______, _______, _______, KC_7, KC_8, KC_9,    KC_DEL,
+        KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_PSLS, KC_PMNS, KC_4, KC_5, KC_6,    KC_ENT,
+        KC_LSFT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2, KC_3,    KC_RSFT,
+        _______, KC_LGUI, KC_LALT,                   _______,                         KC_0, KC_PDOT, XXXXXXX
+    ),
+
+    [_LAYER2] = LAYOUT_default(
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_6,    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
+        _______, XXXXXXX, XXXXXXX,                   XXXXXXX,                            KC_DEL,  KC_RALT, KC_RCTL
+    ),
+};
+
+
+// Rotary Encoder Functions
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            tap_code(KC_VOLD);
+        } else {
+            tap_code(KC_VOLU);
+        }
+    }
+}

keyboards/mb44/keymaps/via/keymap.c

@@ -0,0 +1,58 @@
+/* Copyright 2020 melonbred
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _LAYER1,
+    _LAYER2,
+    _LAYER3
+
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT_default(
+        KC_ESC,        KC_Q,    KC_W,    KC_E, KC_R, KC_T, KC_Y,          KC_U, KC_I,    KC_O,    KC_P,    KC_BSPC,
+        CTL_T(KC_TAB), KC_A,    KC_S,    KC_D, KC_F, KC_G, KC_H,          KC_J, KC_K,    KC_L,    KC_SCLN, KC_ENT,
+        KC_LSFT,       KC_Z,    KC_X,    KC_C, KC_V, KC_B, KC_N,          KC_M, KC_COMM, KC_DOT,  KC_UP,   KC_SLSH,
+        MO(_LAYER2),   KC_LGUI, KC_LALT,             LT(_LAYER1, KC_SPC),                KC_LEFT, KC_RGHT, KC_DOWN
+    ),
+
+    [_LAYER1] = LAYOUT_default(
+        KC_GRV,  KC_QUOT, _______, KC_UP,   _______, _______, _______, _______, KC_7, KC_8, KC_9,    KC_DEL,
+        KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_PSLS, KC_PMNS, KC_4, KC_5, KC_6,    KC_ENT,
+        KC_LSFT, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, KC_PAST, KC_PPLS, KC_1, KC_2, KC_3,    KC_RSFT,
+        _______, KC_LGUI, KC_LALT,                   _______,                         KC_0, KC_PDOT, XXXXXXX
+    ),
+
+    [_LAYER2] = LAYOUT_default(
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_6,    KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLU,
+        XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD,
+        _______, XXXXXXX, XXXXXXX,                   XXXXXXX,                            KC_DEL,  KC_RALT, KC_RCTL
+    ),
+    
+     [_LAYER3] = LAYOUT_default(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______,                   _______,                            _______, _______, _______
+    ),
+    
+};
+

keyboards/mb44/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/mb44/mb44.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 melonbred
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "mb44.h"

keyboards/mb44/mb44.h

@@ -0,0 +1,84 @@
+/* Copyright 2021 melonbred
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+#define XXX KC_NO
+
+
+
+#define LAYOUT_default( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32,           K35,                K39, K3A, K3B \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
+    { K30, K31, K32, XXX, XXX, K35, XXX, XXX, XXX, K39, K3A, K3B } \
+}
+
+#define LAYOUT_2u_space( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33,           K36, K37,      K39, K3A, K3B \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
+    { K30, K31, K32, K33, XXX, XXX, K36, K37, XXX, K39, K3A, K3B } \
+}
+
+#define LAYOUT_2u1u_space( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33,      K35, K36,           K39, K3A, K3B \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
+    { K30, K31, K32, K33, XXX, K35, K36, XXX, XXX, K39, K3A, K3B } \
+}
+
+#define LAYOUT_3u_space( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
+    K30, K31, K32, K33,           K36,           K39, K3A, K3B \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
+    { K30, K31, K32, K33, XXX, XXX, K36, XXX, XXX, K39, K3A, K3B } \
+}

keyboards/mb44/readme.md

@@ -0,0 +1,15 @@
+# MB-44
+
+![MB-44](https://imgur.com/sECiIHR.jpg)
+
+To reset and put into bootloader mode, please use the hardware reset button on the botton of the PCB. If the PCB is on the default firmware, software reset is available by holding the bottom left corner key and pressing `B` in the standard qwerty layout.
+
+* Keyboard Maintainer: [melonbred](https://github.com/melonbred)
+* Hardware Supported: The PCBs, controllers supported
+* Hardware Availability: Links to where you can find this hardware
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mb44:default
+    
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/mb44/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes		# Enable rotary encoder

keyboards/tada68/rules.mk

@@ -11,6 +11,9 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = lufa-ms
 
+# This board uses the older unsafe 6k version of lufa-ms
+BOOTLOADER_SIZE = 6144
+
 # Build Options
 #   change yes to no to disable
 #

keyboards/ztboards/noon/noon.h

@@ -13,5 +13,5 @@
 	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  KC_NO, K115 }, \
 	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  KC_NO, KC_NO, K215 }, \
 	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  KC_NO, K315 }, \
-	{ K400,         K402,  KC_NO, KC_NO, K405,  KC_NO, KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, K413,  KC_NO, K415 }  \
+	{ K400,  KC_NO, K402,  KC_NO, KC_NO, K405,  KC_NO, KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, K413,  KC_NO, K415 }  \
 }

util/install/debian.sh

@@ -15,7 +15,7 @@ _qmk_install() {
         build-essential clang-format diffutils gcc git unzip wget zip \
         python3-pip binutils-avr gcc-avr avr-libc binutils-arm-none-eabi \
         gcc-arm-none-eabi libnewlib-arm-none-eabi avrdude dfu-programmer \
-        dfu-util teensy-loader-cli libhidapi-hidraw0
+        dfu-util teensy-loader-cli libhidapi-hidraw0 libusb-dev
 
     python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt
 }