Debian requires package libusb-dev to build bootloaderHID (#13105)

* Top level heading for common config

Prior to this, the some of the common config looks like a detail of the APA102 driver

* Change heading to Common Config (RGB Matrix)

.vscode/settings.json

@@ -22,5 +22,6 @@
     "[markdown]": {
         "editor.trimAutoWhitespace": false,
         "files.trimTrailingWhitespace": false
-    }
+    },
+    "python.formatting.provider": "yapf"
 }

bin/qmk

@@ -35,6 +35,7 @@ def main():
     print('Warning: The bin/qmk script is being deprecated. Please install the QMK CLI: python3 -m pip install qmk', file=sys.stderr)
 
     # Import the subcommands
+    import milc.subcommand.config  # noqa
     import qmk.cli  # noqa
 
     # Execute

bootloader.mk

@@ -90,12 +90,16 @@ ifeq ($(strip $(BOOTLOADER)), USBasp)
 endif
 ifeq ($(strip $(BOOTLOADER)), lufa-ms)
     OPT_DEFS += -DBOOTLOADER_MS
-    BOOTLOADER_SIZE = 6144
+    BOOTLOADER_SIZE ?= 8192
     FIRMWARE_FORMAT = bin
-    $(info LUFA MASS STORAGE Bootloader selected)
+cpfirmware: lufa_warning
-    $(info DO NOT USE THIS BOOTLOADER IN NEW PROJECTS!)
+.INTERMEDIATE: lufa_warning
-    $(info It is extremely prone to bricking, and is only included to support existing boards.)
+lufa_warning: $(FIRMWARE_FORMAT)
-    $(info )
+	$(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@)
+	$(info LUFA MASS STORAGE Bootloader selected)
+	$(info DO NOT USE THIS BOOTLOADER IN NEW PROJECTS!)
+	$(info It is extremely prone to bricking, and is only included to support existing boards.)
+	$(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@)
 endif
 ifdef BOOTLOADER_SIZE
     OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))

docs/feature_led_matrix.md

@@ -67,6 +67,8 @@ Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet]
 
 ---
 
+## Common Configuration :id=common-configuration
+
 From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example:
 
 ```c

docs/feature_rgb_matrix.md

@@ -229,6 +229,8 @@ Configure the hardware via your `config.h`:
 
 ---
 
+## Common Configuration :id=common-configuration
+
 From this point forward the configuration is the same for all the drivers. The `led_config_t` struct provides a key electrical matrix to led index lookup table, what the physical position of each LED is on the board, and what type of key or usage the LED if the LED represents. Here is a brief example:
 
 ```c

docs/feature_split_keyboard.md

@@ -60,6 +60,7 @@ The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and D0/D1/D2/D3 (aka
 The 4 wires of the TRRS cable need to connect GND, VCC, and SCL and SDA (aka PD0/pin 3 and PD1/pin 2, respectively) between the two Pro Micros. 
 
 The pull-up resistors may be placed on either half. If you wish to use the halves independently, it is also possible to use 4 resistors and have the pull-ups in both halves.
+Note that the total resistance for the connected system should be within spec at 2.2k-10kOhm, with an 'ideal' at 4.7kOhm, regardless of the placement and number.
 
 <img alt="sk-i2c-connection-mono" src="https://user-images.githubusercontent.com/2170248/92297182-92b98580-ef77-11ea-9d7d-d6033914af43.JPG" width="50%"/>
 

docs/ja/_summary.md

@@ -155,6 +155,7 @@
     * [QMK への貢献](ja/contributing.md)
     * [QMK ドキュメントの翻訳](ja/translating.md)
     * [設定オプション](ja/config_options.md)
+    * [データ駆動型コンフィギュレーション](ja/data_driven_config.md)
     * [Make ドキュメント](ja/getting_started_make_guide.md)
     * [ドキュメント ベストプラクティス](ja/documentation_best_practices.md)
     * [ドキュメント テンプレート](ja/documentation_templates.md)

docs/ja/data_driven_config.md

@@ -0,0 +1,123 @@
+# データ駆動型コンフィギュレーション
+
+<!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
+  original document: 0.12.7:docs/data_driven_config.md
+  git diff 0.12.7 HEAD -- docs/data_driven_config.md | cat
+-->
+
+このページでは、QMK のデータ駆動型 JSON コンフィギュレーションシステムがどのように動作するかを説明します。これは、QMK 自体に取り組みたい開発者を対象としています。
+
+## ヒストリー
+
+これまで、QMK は、`rules.mk` と `config.h` の2つのメカニズムを組み合わせてコンフィギュレーションされてきました。
+この方法は、QMK がほんの一握りのキーボードをサポートしていたときは上手く機能していましたが、今では、サポートするキーボードは1500近くまで成長しました。
+`keyboards` の下だけで6000個の設定ファイルがあることが推定されます。
+これらのファイルの自由形式の性質と、重複を避けるために人々が使用してきたユニークなパターンが継続的なメンテナンスを困難にしており、また、多くのキーボードが時代遅れで時には理解が難しいパターンに従っています。
+
+また、CLI に慣れていない人に QMK のパワーを提供することにも取り組んでおり、VIA などの他のプロジェクトでは、プログラムをインストールするのと同じくらい簡単に QMK を使用できるように取り組んでいます。
+これらのツールには、ユーザーが QMK を最大限に活用できるように、キーボードのレイアウト方法や使用可能なピンと機能に関する情報が必要です。
+その第一歩として `info.json` を導入しました。
+QMK API は、これら3つの情報源（`config.h`、` rules.mk`、および `info.json`）を、エンドユーザーツールが使用できる信頼できる単一の情報源に結合するための取り組みです。
+
+これで、`info.json`から `rules.mk` と `config.h` の値を生成することがサポートされ、信頼できる単一の情報源を持つことができます。
+これにより、自動化されたツールを使用してキーボードを保守できるため、時間と保守作業を大幅に節約できます。
+
+## 概要
+
+C 側では何も変わりません。
+新しいルールを作成したり、定義したりする必要がある場合は、同じプロセスに従います。
+
+1. `docs/config_options.md` に追加します。
+1. 適切なコアファイルにデフォルトを設定します。
+1. 必要に応じて ifdef 文を追加します。
+
+次に、新しい構成のサポートを `info.json` に追加する必要があります。
+基本的なプロセスは次のとおりです。
+
+1. `data/schemas/keyboards.jsonschema` のスキーマに追加します
+1. `data/maps` にマッピングを追加します
+1. （オプションおよび非推奨）構成を抽出/生成するコードを追加します。
+   * `lib/python/qmk/info.py`
+   * `lib/python/qmk/cli/generate/config_h.py`
+   * `lib/python/qmk/cli/generate/rules_mk.py`
+
+## info.json にオプションを追加する
+
+このセクションでは、info.json に `config.h`/`rules.mk` の値のサポートを追加することについて説明します。
+
+### スキーマに追加する
+
+QMK では、[jsonschema](https:json-schema.org) のファイルを `data/schemas` に保持しています。
+キーボード固有の `info.json` ファイルに入る値は `keyboard.jsonschema` に保持されています。
+エンドユーザーが編集できるようにしたい値はすべてここに入れなければなりません。
+
+場合によっては、新しいトップレベルキーを追加するだけで済みます。
+従うべきいくつかの例は、 `keyboard_name`、`maintainer`、 `processor`、および `url` です。
+これは、オプションが自己完結型で、他のオプションと直接関係がない場合に適しています。
+
+その他の場合、1つの `object` の中に、似ているオプションを集める必要があります。
+これは、機能のサポートを追加する場合に特に当てはまります。
+このために従うべきいくつかの例は、`indicators`、`matrix_pins`、および `rgblight` です。
+新しいオプションを統合する方法がわからない場合は、[問題を開く](https://github.com/qmk/qmk_firmware/issues/new?assignees=&labels=cli%2C+python&template=other_issues.md&title=)か、[Discord で #cli に参加](https://discord.gg/heQPAgy)して、そこで会話を始めてください。
+
+### マッピングを追加する
+
+ほとんどの場合、単純なマッピングを追加することができます。
+これらは `data/mappings/info_config.json` と `data/mappings/info_rules.json` に JSON ファイルとして保持され、それぞれ `config.h` と `rules.mk` のマッピングを制御します。
+各マッピングは `config.h` または `rules.mk` 変数名をキーとし、値は以下のキーを持つハッシュです。
+
+* `info_key`: (必須）この値の `info.json` 内の場所。 下記参照。
+* `value_type`: (オプション）デフォルトは `str`。 この変数の値の形式。 下記参照。
+* `to_json`: (オプション）デフォルトは `true`。 このマッピングを info.json から除外するには、`false` に設定します
+* `to_c`: (オプション）デフォルトは `true`。 このマッピングを config.h から除外するには、`false` に設定します
+* `warn_duplicate`: (オプション）デフォルトは `true`。 値が両方の場所に存在する場合に警告をオフにするには、`false` に設定します
+
+#### Info Key
+
+info.json 内の変数をアドレス指定するために JSON ドット表記を使用します。
+たとえば、`info_json["rgblight"]["split_count"]` にアクセスするには、`rgblight.split_count` を指定します。
+これにより、深くネストされたキーを単純な文字列でアドレス指定できます。
+
+内部では [Dotty Dict](https://dotty-dict.readthedocs.io/en/latest/) を使用しています。これらの文字列がオブジェクトアクセスに変換される方法についてはそのドキュメントを参照してください。
+
+#### Value Types
+
+デフォルトでは、すべての値を単純な文字列として扱います。
+値がより複雑な場合は、次のいずれかのタイプを使用してデータをインテリジェントに解析できます。
+
+* `array`: 文字列のコンマ区切りの配列
+* `array.int`: 整数のコンマ区切り配列
+* `int`: 整数
+* `hex`: 16進数としてフォーマットされた数値
+* `list`: 文字列のスペース区切りの配列
+* `mapping`: キーと値のペアのハッシュ
+
+### 抽出するコードを追加する
+
+ほとんどのユースケースは、上記のマッピングファイルによって解決できます。
+できない場合は、代わりに設定値を抽出するコードを書くことができます。
+
+QMK が完全な `info.json` を生成するときはいつでも、`config.h` と `rules.mk` から情報を抽出します。
+あなたの新しい設定値のためのコードを `lib/python/qmk/info.py` に追加する必要があります。
+通常、これは、新しい `_extract_<feature>()` 関数を追加してから、 `_extract_config_h()` または `_extract_rules_mk()` のいずれかで関数を呼び出すことを意味します。
+
+このファイルの編集方法がわからない場合、または Python に慣れていない場合は、[issue を開く](https://github.com/qmk/qmk_firmware/issues/new?assignees=&labels=cli%2C+python&template=other_issues.md&title=）か [Discord で #cli に参加](https://discord.gg/heQPAgy)すると、この部分を誰かが手伝ってくれるでしょう。
+
+### 生成するコードを追加する
+
+パズルの最後のピースは、ビルドシステムに新しいオプションを提供することです。
+これは、2つのファイルを生成することによって行われます。
+
+* `.build/obj_<keyboard>/src/info_config.h`
+* `.build/obj_<keyboard>/src/rules.mk`
+
+この2つのファイルは、次のコードによって生成されます。
+
+* `lib/python/qmk/cli/generate/config_h.py`
+* `lib/python/qmk/cli/generate/rules_mk.py`
+
+`config.h`値の場合、ルール用の関数を記述し、その関数を `generate_config_h()` で呼び出す必要があります。
+
+`rules.mk` の新しいトップレベルの `info.json` キーがある場合は、`lib/python/qmk/cli/generate/rules_mk.py` の上部にある `info_to_rules` にキーを追加するだけです。
+それ以外の場合は、`generate_rules_mk()` で機能の新しい if ブロックを作成する必要があります。

docs/ja/feature_pointing_device.md

@@ -1,8 +1,8 @@
 # ポインティングデバイス :id=pointing-device
 
 <!---
-  original document: 0.9.43:docs/feature_pointing_device.md
+  original document: 0.12.41:docs/feature_pointing_device.md
-  git diff 0.9.43 HEAD -- docs/feature_pointing_device.md | cat
+  git diff 0.12.41 HEAD -- docs/feature_pointing_device.md | cat
 -->
 
 ポインティングデバイスは汎用的な機能の総称です: システムポインタを移動します。マウスキーのような他のオプションも確かにありますが、これは簡単に変更可能で軽量であることを目指しています。機能を制御するためにカスタムキーを実装したり、他の周辺機器から情報を収集してここに直接挿入したりできます - QMK に処理を任せてください。
@@ -24,7 +24,7 @@ report_mouse_t (ここでは "mouseReport") が以下のプロパティを持つ
 * `mouseReport.y` - これは、y軸の動き(+ 上へ、- 下へ)を表す -127 から 127 (128ではなく、USB HID 仕様で定義されています)の符号付き整数です。
 * `mouseReport.v` - これは、垂直スクロール(+ 上へ、- 下へ)を表す -127 から 127 (128ではなく、USB HID 仕様で定義されています)の符号付き整数です。
 * `mouseReport.h` - これは、水平スクロール(+ 右へ、- 左へ)を表す -127 から 127 (128ではなく、USB HID 仕様で定義されています)の符号付き整数です。
-* `mouseReport.buttons` - これは uint8_t で、上位の5ビットを使っています。これらのビットはマウスボタンの状態を表します - ビット 3 はマウスボタン 5、ビット 7 はマウスボタン 1 です。
+* `mouseReport.buttons` - これは uint8_t で、8ビット全てを使っています。これらのビットはマウスボタンの状態を表します - ビット 0 はマウスボタン 1、ビット 7 はマウスボタン 8 です。
 
 マウスレポートに必要な変更を行ったら、それを送信する必要があります:
 
@@ -32,6 +32,10 @@ report_mouse_t (ここでは "mouseReport") が以下のプロパティを持つ
 
 マウスレポートが送信されると、x、y、v、h のいずれの値も 0 に設定されます (これは `pointing_device_send()` で行われます。この挙動を回避するためにオーバーライドすることができます)。このように、ボタンの状態は持続しますが、動きは1度だけ起こります。さらにカスタマイズするために、`pointing_device_init` と `pointing_device_task` のどちらもオーバーライドすることができます。
 
+さらに、デフォルトでは、`pointing_device_send()` はレポートが実際に変更された場合のみレポートを送信します。これにより、マウスレポートが継続的に送信されてホストシステムが起動されたままになることを防ぎます。この動作は、独自の `pointing_device_send()` 関数を作成することで変更できます。
+
+また、`has_mouse_report_changed(new, old)` 関数を使って、レポートが変更されたかどうかを確認できます。(訳注：独自の `pointing_device_send()` 関数を作成する場合でも、その中で `has_mouse_report_changed(new, old)` 関数でチェックして、デフォルトの `pointing_device_send()` と類似の無駄なレポートの抑制をして、ホストシステムがスリープ状態に入れる余地を残すようにしておくのが良いでしょう。)
+
 以下の例では、カスタムキーを使ってマウスをクリックし垂直および水平方向に127単位スクロールし、リリースされた時にそれを全て元に戻します - なぜならこれは完全に便利な機能だからです。いいですか、以下はひとつの例です:
 
 ```c

docs/ja/newbs.md

@@ -1,9 +1,9 @@
-# QMK 初心者ガイド
+# QMK チュートリアル
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: 0.9.0:docs/newbs.md
+  original document: 0.12.45:docs/newbs.md
-  git diff 0.9.0 HEAD -- docs/newbs.md | cat
+  git diff 0.12.45 HEAD -- docs/newbs.md | cat
 -->
 
 キーボードには、コンピュータ入っているものと似たようなプロセッサが入っています。
@@ -19,20 +19,16 @@ QMK は、簡単なことは簡単に、そして、難しいことを可能な
 QMK は[多くの趣味のキーボード](https://qmk.fm/keyboards/)をサポートしています。
 現在使用しているキーボードが QMK を実行できない場合、QMK を実行できるキーボードの選択肢はたくさんあります。
 
-## このガイドは私のためにあるのでしょうか？
+?> **このガイドは私のためにあるのでしょうか？**<br>
-
+もし、プログラミングの考え方に抵抗があるのであれば、代わりに[私たちのオンライン GUI](ja/newbs_building_firmware_configurator.md) を見てみてください。
-このガイドは、ソースコードを使ってキーボードのファームウェアを構築したいと考えている人に適しています。
-もしあなたがすでにプログラマーであれば、このプロセスはとても身近で簡単に理解できるでしょう。
-もし、プログラミングの考え方に抵抗があるのであれば、代わりに[私たちのオンラインGUI](ja/newbs_building_firmware_configurator.md)を見てみてください。
 
 ## 概要
 
-このガイドには4つの主要なセクションがあります。
+このガイドは、ソースコードを使ってキーボードのファームウェアを構築したいと考えている人に適しています。 もしあなたがすでにプログラマーであれば、このプロセスはとても身近で簡単に理解できるでしょう。このガイドには3つの主要なセクションがあります:
 
 1. [環境設定](ja/newbs_getting_started.md)
 2. [コマンドラインを使用して初めてのファームウェアを構築する](ja/newbs_building_firmware.md)
 3. [ファームウェアを書きこむ](ja/newbs_flashing.md)
-4. [テストとデバッグ](ja/newbs_testing_debugging.md)
 
 このガイドは、これまでソフトウェアをコンパイルしたことがない人を支援することに特化しています。
 その観点から選択と推奨を行います。
@@ -41,8 +37,4 @@ QMK は[多くの趣味のキーボード](https://qmk.fm/keyboards/)をサポ
 
 ## 追加のリソース
 
-このガイドの他にも、QMK の学習に役立つリソースがいくつかあります。[学習リソース](ja/newbs_learn_more_resources.md)のページにまとめました。
+このガイドの他にも、QMK の学習に役立つリソースがいくつかあります。[シラバス](ja/syllabus.md)と[学習リソース](ja/newbs_learn_more_resources.md)のページにまとめました。
-
-## オープンソース
-
-QMKは GNU General Public License でリリースされているオープンソース・ソフトウェアです。

docs/ja/newbs_flashing.md

@@ -1,12 +1,12 @@
-# ファームウェアを書きこむ
+# ファームウェアを書き込む
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: 0.9.44:docs/newbs_flashing.md
+  original document: 0.12.45:docs/newbs_flashing.md
-  git diff 0.9.44 HEAD -- docs/newbs_flashing.md | cat
+  git diff 0.12.45 HEAD -- docs/newbs_flashing.md | cat
 -->
 
-カスタムファームウェアは出来たので、キーボードに書き込みたくなるでしょう/フラッシュしたくなるでしょう。
+カスタムファームウェアは出来たので、いよいよキーボードへの書き込み(フラッシュ)です。
 
 ## キーボードを DFU (Bootloader) モードにする
 
@@ -50,18 +50,22 @@ Finder またはエクスプローラーでファームウェアのファイル
 
 Windows か macOS を使用している場合、現在のフォルダをエクスプローラーか Finder で簡単に開くためのコマンドがあります。
 
-#### Windows
+<!-- tabs:start -->
+
+#### ** Windows **
 
 ```
 start .
 ```
 
-#### macOS
+#### ** macOS **
 
 ```
 open .
 ```
 
+<!-- tabs:end -->
+
 ファームウェアファイルは常に以下の命名形式に従っています:
 
 ```
@@ -117,11 +121,13 @@ QMK Toolbox の `Flash` ボタンをクリックします。次のような出
 
     WARNING: This board's bootloader is not specified or is not supported by the ":flash" target at this time.
 
-この場合、あなたは明示的にブートローダを指定する方法を使わなければなりません。詳細は、[ファームウェアのフラッシュ](ja/flashing.md) ガイドを参照してください。
+この場合、あなたは明示的にブートローダを指定する方法を使わなければなりません。詳細は、[ファームウェアのフラッシュ](ja/flashing.md)ガイドを参照してください。
 
 ## テストしましょう！
 
-おめでとうございます！ カスタムファームウェアがキーボードにプログラムされました！
+おめでとうございます！カスタムファームウェアがキーボードにプログラムされ、テストする準備ができました！
 
-使ってみて、すべてがあなたの望むように動作するかどうか確認してください。
+少し運が良ければ全てが完璧に機能しますが、そうでない場合は何が問題なのかを理解するのに役立つ手順があります。
-この初心者ガイドを完全なものにするために [テストとデバッグ](ja/newbs_testing_debugging.md) を書いたので、ファームウェアの検証とカスタム機能のトラブルシューティング方法について学ぶには、こちらをご覧ください。
+通常、キーボードのテストは非常に簡単です。全てのキーをひとつずつ押して、期待するキーが送信されることを確認します。例え QMK で動作していない場合でも、[QMK Configurator](https://config.qmk.fm/#/test/) のテストモードを使用すると、キーボードをチェックできます。
+
+まだ動作しませんか？詳細については FAQ トピックを参照するか、[Discord でチャット](https://discord.gg/Uq7gcHh)してください。

docs/ja/newbs_learn_more_resources.md

@@ -2,13 +2,13 @@
 
 <!---
   grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: 0.9.0:docs/newbs_learn_more_resources.md
+  original document: 0.12.45:docs/newbs_learn_more_resources.md
-  git diff 0.9.0 HEAD -- docs/newbs_learn_more_resources.md | cat
+  git diff 0.12.45 HEAD -- docs/newbs_learn_more_resources.md | cat
 -->
 
 これらのリソースは、QMK コミュニティの新しいメンバーに、初心者向けドキュメントで提供されている情報に対する理解を深めることを目的としています。
 
-## QMK に関するリソース:
+## QMK に関するリソース
 
 ### 英語 :id=english-resources-qmk
 
@@ -18,17 +18,35 @@
 
 _日本語のリソース情報を募集中です。_
 
-## コマンドラインに関するリソース:
+## コマンドラインに関するリソース :id=command-line-resources
 
 ### 英語 :id=english-resources-cli
 
 * [Good General Tutorial on Command Line](https://www.codecademy.com/learn/learn-the-command-line)
+* [Must Know Linux Commands](https://www.guru99.com/must-know-linux-commands.html)<br>
+* [Some Basic Unix Commands](https://www.tjhsst.edu/~dhyatt/superap/unixcmd.html)
 
 ### 日本語 :id=japanese-resources-cli
 
 _日本語のリソース情報を募集中です。_
 
-## Git に関するリソース:
+## テキストエディタに関するリソース :id=text-editor-resources
+
+どのテキストエディタを使えば良いか分かりませんか？
+
+### 英語 :id=english-resources-text-editor
+
+* [a great introduction to the subject](https://learntocodewith.me/programming/basics/text-editors/)
+
+### 日本語 :id=japanese-resources-text-editor
+
+_日本語のリソース情報を募集中です。_
+
+コーディング用に特別に作成されたエディタ:
+* [Sublime Text](https://www.sublimetext.com/)
+* [VS Code](https://code.visualstudio.com/)
+
+## Git に関するリソース
 
 ### 英語 :id=english-resources-git
 

docs/one_shot_keys.md

@@ -23,7 +23,7 @@ You can control the behavior of one shot keys by defining these in `config.h`:
 
 Sometimes, you want to activate a one-shot key as part of a macro or tap dance routine.  
 
-For one shot layers, you need to call `set_oneshot_layer(LAYER, ONESHOT_START)` on key down, and `clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED)` on key up. If you want to cancel the oneshot, call `reset_oneshot_layer()`.
+For one shot layers, you need to call `set_oneshot_layer(LAYER, ONESHOT_START)` on key down, and `clear_oneshot_layer_state(ONESHOT_PRESSED)` on key up. If you want to cancel the oneshot, call `reset_oneshot_layer()`.
 
 For one shot mods, you need to call `set_oneshot_mods(MOD_BIT(KC_*))` to set it, or `clear_oneshot_mods()` to cancel it.
 

keyboards/anavi/macropad2/keymaps/skype/keymap.c

@@ -0,0 +1,41 @@
+/* Copyright 2021 Leon Anavi <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+/*
+ * The keymap contains the following shortcuts for Skype on
+ * MS Windows and GNU/Linux distributions:
+ *
+ * Ctrl+M: Mute/unmute microphone
+ * Ctrl+Shift+K: Start/stop camera
+ *
+ * NOTE: Mac users should change the shortcut to toggle the mic
+ * to Command+Shift+M, for example KC_LGUI(LSFT(KC_M))
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT(
+    LCTL(KC_M),  LCTL(LSFT(KC_K))
+  )
+};
+
+const uint16_t PROGMEM test_combo[] = {LCTL(KC_M), LCTL(LSFT(KC_K)), COMBO_END};
+combo_t key_combos[COMBO_COUNT] = {COMBO_ACTION(test_combo)};
+
+void process_combo_event(uint16_t combo_index, bool pressed) {
+	backlight_step();
+}

keyboards/anavi/macropad2/keymaps/skype/rules.mk

@@ -0,0 +1 @@
+COMBO_ENABLE = yes

keyboards/clawsome/hatchback/config.h

@@ -0,0 +1,45 @@
+/* Copyright 2021 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x7767
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    AlisGraveNil
+#define PRODUCT         hatchbackTKL
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 10
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, B6, D4, B4, D0, B5, D1, E6, D2, D7, D3, C6 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, D5, C7, F1 }
+
+#define DIODE_DIRECTION COL2ROW

keyboards/clawsome/hatchback/hatcback.h

@@ -0,0 +1,41 @@
+/* Copyright 2021 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00,      K01, K11, K02, K12,   K03, K13, K04, K14,    K05, K15, K06, K16,  K07, K18, K09,  \
+    K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36,       K27, K38, K29,  \
+    K40,   K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56,     K47, K58, K49,  \
+    K60,    K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K76,                         \
+    K80,       K90, K81, K91, K82, K92, K83, K93, K84, K94, K85, K96,                K98,       \
+    KA0,  KB0,  KA1,  KA2,        KA3,    KA4,        KA5,  KB5,  KA6,  KB6,    KA7, KB8, KA9   \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   KC_NO, K09   }, \
+    { KC_NO, K11,   K12,   K13,   K14,   K15,   K16,   KC_NO, K18,   KC_NO }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   KC_NO, K29   }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   KC_NO, K38,   KC_NO }, \
+    { K40,   K41,   K42,   K43,   K44,   K45,   K46,   K47,   KC_NO, K49   }, \
+    { K50,   K51,   K52,   K53,   K54,   K55,   K56,   KC_NO, K58,   KC_NO }, \
+    { K60,   K61,   K62,   K63,   K64,   K65,   KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { K70,   K71,   K72,   K73,   K74,   K75,   K76,   KC_NO, KC_NO, KC_NO }, \
+    { K80,   K81,   K82,   K83,   K84,   K85,   KC_NO, KC_NO, KC_NO, KC_NO }, \
+    { K90,   K91,   K92,   K93,   K94,   KC_NO, K96,   KC_NO, K98,   KC_NO }, \
+    { KA0,   KA1,   KA2,   KA3,   KA4,   KA5,   KA6,   KA7,   KC_NO, KA9   }, \
+    { KB0,   KC_NO, KC_NO, KC_NO, KC_NO, KB5,   KB6,   KC_NO, KB8,   KC_NO }, \
+}

keyboards/clawsome/hatchback/hatchback.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "hatchback.h"

keyboards/clawsome/hatchback/info.json

@@ -0,0 +1,102 @@
+{
+    "keyboard_name": "hatchbackTKL",
+    "url": "www.clawboards.xyz",
+    "maintainer": "AAClawson (AlisGraveNil)",
+    "width": 18.25,
+    "height": 6.5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"K00 (B0,F4)", "x":0, "y":0},
+                {"label":"K01 (B0,F5)", "x":2, "y":0},
+                {"label":"K11 (B6,F5)", "x":3, "y":0},
+                {"label":"K02 (B0,F6)", "x":4, "y":0},
+                {"label":"K12 (B6,F6)", "x":5, "y":0},
+                {"label":"K03 (B0,F7)", "x":6.5, "y":0},
+                {"label":"K13 (B6,F7)", "x":7.5, "y":0},
+                {"label":"K04 (B0,B1)", "x":8.5, "y":0},
+                {"label":"K14 (B6,B1)", "x":9.5, "y":0},
+                {"label":"K05 (B0,B3)", "x":11, "y":0},
+                {"label":"K15 (B6,B3)", "x":12, "y":0},
+                {"label":"K06 (B0,B2)", "x":13, "y":0},
+                {"label":"K16 (B6,B2)", "x":14, "y":0},
+                {"label":"K07 (B0,D5)", "x":15.25, "y":0},
+                {"label":"K18 (B6,C7)", "x":16.25, "y":0},
+                {"label":"K09 (B0,F1)", "x":17.25, "y":0},
+                {"label":"K20 (D4,F4)", "x":0, "y":1.5},
+                {"label":"K30 (B4,F4)", "x":1, "y":1.5},
+                {"label":"K21 (D4,F5)", "x":2, "y":1.5},
+                {"label":"K31 (B4,F5)", "x":3, "y":1.5},
+                {"label":"K22 (D4,F6)", "x":4, "y":1.5},
+                {"label":"K32 (B4,F6)", "x":5, "y":1.5},
+                {"label":"K23 (D4,F7)", "x":6, "y":1.5},
+                {"label":"K33 (B4,F7)", "x":7, "y":1.5},
+                {"label":"K24 (D4,B1)", "x":8, "y":1.5},
+                {"label":"K34 (B4,B1)", "x":9, "y":1.5},
+                {"label":"K25 (D4,B3)", "x":10, "y":1.5},
+                {"label":"K35 (B4,B3)", "x":11, "y":1.5},
+                {"label":"K26 (D4,B2)", "x":12, "y":1.5},
+                {"label":"K36 (B4,B2)", "x":13, "y":1.5, "w":2},
+                {"label":"K27 (D4,D5)", "x":15.25, "y":1.5},
+                {"label":"K38 (B4,C7)", "x":16.25, "y":1.5},
+                {"label":"K29 (D4,F1)", "x":17.25, "y":1.5},
+                {"label":"K40 (D0,F4)", "x":0, "y":2.5, "w":1.5},
+                {"label":"K50 (B5,F4)", "x":1.5, "y":2.5},
+                {"label":"K41 (D0,F5)", "x":2.5, "y":2.5},
+                {"label":"K51 (B5,F5)", "x":3.5, "y":2.5},
+                {"label":"K42 (D0,F6)", "x":4.5, "y":2.5},
+                {"label":"K52 (B5,F6)", "x":5.5, "y":2.5},
+                {"label":"K43 (D0,F7)", "x":6.5, "y":2.5},
+                {"label":"K53 (B5,F7)", "x":7.5, "y":2.5},
+                {"label":"K44 (D0,B1)", "x":8.5, "y":2.5},
+                {"label":"K54 (B5,B1)", "x":9.5, "y":2.5},
+                {"label":"K45 (D0,B3)", "x":10.5, "y":2.5},
+                {"label":"K55 (B5,B3)", "x":11.5, "y":2.5},
+                {"label":"K46 (D0,B2)", "x":12.5, "y":2.5},
+                {"label":"K56 (B5,B2)", "x":13.5, "y":2.5, "w":1.5},
+                {"label":"K47 (D0,D5)", "x":15.25, "y":2.5},
+                {"label":"K58 (B5,C7)", "x":16.25, "y":2.5},
+                {"label":"K49 (D0,F1)", "x":17.25, "y":2.5},
+                {"label":"K60 (D1,F4)", "x":0, "y":3.5, "w":1.75},
+                {"label":"K70 (E6,F4)", "x":1.75, "y":3.5},
+                {"label":"K61 (D1,F5)", "x":2.75, "y":3.5},
+                {"label":"K71 (E6,F5)", "x":3.75, "y":3.5},
+                {"label":"K62 (D1,F6)", "x":4.75, "y":3.5},
+                {"label":"K72 (E6,F6)", "x":5.75, "y":3.5},
+                {"label":"K63 (D1,F7)", "x":6.75, "y":3.5},
+                {"label":"K73 (E6,F7)", "x":7.75, "y":3.5},
+                {"label":"K64 (D1,B1)", "x":8.75, "y":3.5},
+                {"label":"K74 (E6,B1)", "x":9.75, "y":3.5},
+                {"label":"K65 (D1,B3)", "x":10.75, "y":3.5},
+                {"label":"K75 (E6,B3)", "x":11.75, "y":3.5},
+                {"label":"K76 (E6,B2)", "x":12.75, "y":3.5, "w":2.25},
+                {"label":"K80 (D2,F4)", "x":0, "y":4.5, "w":2.25},
+                {"label":"K90 (D7,F4)", "x":2.25, "y":4.5},
+                {"label":"K81 (D2,F5)", "x":3.25, "y":4.5},
+                {"label":"K91 (D7,F5)", "x":4.25, "y":4.5},
+                {"label":"K82 (D2,F6)", "x":5.25, "y":4.5},
+                {"label":"K92 (D7,F6)", "x":6.25, "y":4.5},
+                {"label":"K83 (D2,F7)", "x":7.25, "y":4.5},
+                {"label":"K93 (D7,F7)", "x":8.25, "y":4.5},
+                {"label":"K84 (D2,B1)", "x":9.25, "y":4.5},
+                {"label":"K94 (D7,B1)", "x":10.25, "y":4.5},
+                {"label":"K85 (D2,B3)", "x":11.25, "y":4.5},
+                {"label":"K96 (D7,B2)", "x":12.25, "y":4.5, "w":2.75},
+                {"label":"K98 (D7,C7)", "x":16.25, "y":4.5},
+                {"label":"KA0 (D3,F4)", "x":0, "y":5.5, "w":1.25},
+                {"label":"KB0 (C6,F4)", "x":1.25, "y":5.5, "w":1.25},
+                {"label":"KA1 (D3,F5)", "x":2.5, "y":5.5, "w":1.25},
+                {"label":"KA2 (D3,F6)", "x":3.75, "y":5.5, "w":2.25},
+                {"label":"KA3 (D3,F7)", "x":6, "y":5.5, "w":1.75},
+                {"label":"KA4 (D3,B1)", "x":7.75, "y":5.5, "w":2.25},
+                {"label":"KA5 (D3,B3)", "x":10, "y":5.5, "w":1.25},
+                {"label":"KB5 (C6,B3)", "x":11.25, "y":5.5, "w":1.25},
+                {"label":"KA6 (D3,B2)", "x":12.5, "y":5.5, "w":1.25},
+                {"label":"KB6 (C6,B2)", "x":13.75, "y":5.5, "w":1.25},
+                {"label":"KA7 (D3,D5)", "x":15.25, "y":5.5},
+                {"label":"KB8 (C6,C7)", "x":16.25, "y":5.5},
+                {"label":"KA9 (D3,F1)", "x":17.25, "y":5.5}
+            ]
+        }
+    }
+}

keyboards/clawsome/hatchback/keymap/default/keymap.c

@@ -0,0 +1,30 @@
+/* Copyright 2021 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,    KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,            KC_INS,  KC_HOME, KC_PGUP,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,        KC_DEL,  KC_END,  KC_PGDN,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                            KC_UP,
+        KC_LCTL,   KC_LGUI,   KC_LALT,   KC_SPC,              KC_SPC,        KC_SPC,              KC_RALT,   KC_RGUI,   KC_MENU,   KC_RCTL,      KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+
+};
+

keyboards/clawsome/hatchback/readme.md

@@ -0,0 +1,14 @@
+# SUV
+
+This is TKL keyboard that can be converted down into a 75% keyboard and a 13key macropad (see "luggage rack")
+
+- Keyboard Maintainer: [AAClawson](https://github.com/AlisGraveNil)
+- Hardware Supported: Hatchback, Elite-C (as TKL); Pro-Micro and nice!nano (as 75%)
+- Hardware Availability: In stock within the next month
+
+Make example for this keyboard (after setting up your build environment):
+
+    make clawsome/hatchback:default
+    Connect your board to your computer; connect the "GND" and "RST" pins on your controller using a wire or a pair of tweezers and hold it for 3 seconds to force the controller into bootloader mode. Then use QMK Toolbox to flash the .hex you downloaded from the QMK website. If using an Elite-C, there's a small black reset button on the PCB you can press instead of trying to connect the two pins.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/clawsome/hatchback/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/clawsome/suv/config.h

@@ -0,0 +1,45 @@
+/* Copyright 2021 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x7767
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    AlisGraveNil
+#define PRODUCT         suv1.1
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 11
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { F0, B6, D0, F6, D4, F7, B3, B1, B0, C6, B2, D7 }
+#define MATRIX_COL_PINS { D3, D2, D1, B4, B5, B7, D5, C7, F1, F5, F4 }
+
+#define DIODE_DIRECTION COL2ROW

keyboards/clawsome/suv/info.json

@@ -0,0 +1,120 @@
+{
+    "keyboard_name": "suv1.1",
+    "url": "www.clawboards.xyz",
+    "maintainer": "AAClawson (AlisGraveNil)",
+    "width": 22.5,
+    "height": 6.5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"K00 (F0,D3)", "x":0, "y":0},
+                {"label":"K01 (F0,D2)", "x":2, "y":0},
+                {"label":"K11 (B6,D2)", "x":3, "y":0},
+                {"label":"K02 (F0,D1)", "x":4, "y":0},
+                {"label":"K12 (B6,D1)", "x":5, "y":0},
+                {"label":"K03 (F0,B4)", "x":6.5, "y":0},
+                {"label":"K13 (B6,B4)", "x":7.5, "y":0},
+                {"label":"K04 (F0,B5)", "x":8.5, "y":0},
+                {"label":"K14 (B6,B5)", "x":9.5, "y":0},
+                {"label":"K05 (F0,B7)", "x":11, "y":0},
+                {"label":"K15 (B6,B7)", "x":12, "y":0},
+                {"label":"K06 (F0,D5)", "x":13, "y":0},
+                {"label":"K16 (B6,D5)", "x":14, "y":0},
+                {"label":"K07 (F0,C7)", "x":15.25, "y":0},
+                {"label":"K17 (B6,C7)", "x":16.25, "y":0},
+                {"label":"K08 (F0,F1)", "x":17.25, "y":0},
+                {"label":"K20 (D0,D3)", "x":0, "y":1.5},
+                {"label":"K30 (F6,D3)", "x":1, "y":1.5},
+                {"label":"K21 (D0,D2)", "x":2, "y":1.5},
+                {"label":"K31 (F6,D2)", "x":3, "y":1.5},
+                {"label":"K22 (D0,D1)", "x":4, "y":1.5},
+                {"label":"K32 (F6,D1)", "x":5, "y":1.5},
+                {"label":"K23 (D0,B4)", "x":6, "y":1.5},
+                {"label":"K33 (F6,B4)", "x":7, "y":1.5},
+                {"label":"K24 (D0,B5)", "x":8, "y":1.5},
+                {"label":"K34 (F6,B5)", "x":9, "y":1.5},
+                {"label":"K25 (D0,B7)", "x":10, "y":1.5},
+                {"label":"K35 (F6,B7)", "x":11, "y":1.5},
+                {"label":"K26 (D0,D5)", "x":12, "y":1.5},
+                {"label":"K36 (F6,D5)", "x":13, "y":1.5, "w":2},
+                {"label":"K27 (D0,C7)", "x":15.25, "y":1.5},
+                {"label":"K37 (F6,C7)", "x":16.25, "y":1.5},
+                {"label":"K28 (D0,F1)", "x":17.25, "y":1.5},
+                {"label":"K38 (F6,F1)", "x":18.5, "y":1.5},
+                {"label":"K29 (D0,F5)", "x":19.5, "y":1.5},
+                {"label":"K39 (F6,F5)", "x":20.5, "y":1.5},
+                {"label":"K2A (D0,F4)", "x":21.5, "y":1.5},
+                {"label":"K40 (D4,D3)", "x":0, "y":2.5, "w":1.5},
+                {"label":"K50 (F7,D3)", "x":1.5, "y":2.5},
+                {"label":"K41 (D4,D2)", "x":2.5, "y":2.5},
+                {"label":"K51 (F7,D2)", "x":3.5, "y":2.5},
+                {"label":"K42 (D4,D1)", "x":4.5, "y":2.5},
+                {"label":"K52 (F7,D1)", "x":5.5, "y":2.5},
+                {"label":"K43 (D4,B4)", "x":6.5, "y":2.5},
+                {"label":"K53 (F7,B4)", "x":7.5, "y":2.5},
+                {"label":"K44 (D4,B5)", "x":8.5, "y":2.5},
+                {"label":"K54 (F7,B5)", "x":9.5, "y":2.5},
+                {"label":"K45 (D4,B7)", "x":10.5, "y":2.5},
+                {"label":"K55 (F7,B7)", "x":11.5, "y":2.5},
+                {"label":"K46 (D4,D5)", "x":12.5, "y":2.5},
+                {"label":"K56 (F7,D5)", "x":13.5, "y":2.5, "w":1.5},
+                {"label":"K47 (D4,C7)", "x":15.25, "y":2.5},
+                {"label":"K57 (F7,C7)", "x":16.25, "y":2.5},
+                {"label":"K48 (D4,F1)", "x":17.25, "y":2.5},
+                {"label":"K58 (F7,F1)", "x":18.5, "y":2.5},
+                {"label":"K49 (D4,F5)", "x":19.5, "y":2.5},
+                {"label":"K59 (F7,F5)", "x":20.5, "y":2.5},
+                {"label":"K4A (D4,F4)", "x":21.5, "y":2.5, "h":2},
+                {"label":"K60 (B3,D3)", "x":0, "y":3.5, "w":1.75},
+                {"label":"K70 (B1,D3)", "x":1.75, "y":3.5},
+                {"label":"K61 (B3,D2)", "x":2.75, "y":3.5},
+                {"label":"K71 (B1,D2)", "x":3.75, "y":3.5},
+                {"label":"K62 (B3,D1)", "x":4.75, "y":3.5},
+                {"label":"K72 (B1,D1)", "x":5.75, "y":3.5},
+                {"label":"K63 (B3,B4)", "x":6.75, "y":3.5},
+                {"label":"K73 (B1,B4)", "x":7.75, "y":3.5},
+                {"label":"K64 (B3,B5)", "x":8.75, "y":3.5},
+                {"label":"K74 (B1,B5)", "x":9.75, "y":3.5},
+                {"label":"K65 (B3,B7)", "x":10.75, "y":3.5},
+                {"label":"K75 (B1,B7)", "x":11.75, "y":3.5},
+                {"label":"K76 (B1,D5)", "x":12.75, "y":3.5, "w":2.25},
+                {"label":"K78 (B1,F1)", "x":18.5, "y":3.5},
+                {"label":"K69 (B3,F5)", "x":19.5, "y":3.5},
+                {"label":"K79 (B1,F5)", "x":20.5, "y":3.5},
+                {"label":"K80 (B0,D3)", "x":0, "y":4.5, "w":2.25},
+                {"label":"K90 (C6,D3)", "x":2.25, "y":4.5},
+                {"label":"K81 (B0,D2)", "x":3.25, "y":4.5},
+                {"label":"K91 (C6,D2)", "x":4.25, "y":4.5},
+                {"label":"K82 (B0,D1)", "x":5.25, "y":4.5},
+                {"label":"K92 (C6,D1)", "x":6.25, "y":4.5},
+                {"label":"K83 (B0,B4)", "x":7.25, "y":4.5},
+                {"label":"K93 (C6,B4)", "x":8.25, "y":4.5},
+                {"label":"K84 (B0,B5)", "x":9.25, "y":4.5},
+                {"label":"K94 (C6,B5)", "x":10.25, "y":4.5},
+                {"label":"K85 (B0,B7)", "x":11.25, "y":4.5},
+                {"label":"K96 (C6,D5)", "x":12.25, "y":4.5, "w":2.75},
+                {"label":"K97 (C6,C7)", "x":16.25, "y":4.5},
+                {"label":"K98 (C6,F1)", "x":18.5, "y":4.5},
+                {"label":"K89 (B0,F5)", "x":19.5, "y":4.5},
+                {"label":"K99 (C6,F5)", "x":20.5, "y":4.5},
+                {"label":"K8A (B0,F4)", "x":21.5, "y":4.5, "h":2},
+                {"label":"KA0 (B2,D3)", "x":0, "y":5.5, "w":1.25},
+                {"label":"KB0 (D7,D3)", "x":1.25, "y":5.5, "w":1.25},
+                {"label":"KA1 (B2,D2)", "x":2.5, "y":5.5, "w":1.25},
+                {"label":"KA2 (B2,D1)", "x":3.75, "y":5.5, "w":2.25},
+                {"label":"KA3 (B2,B4)", "x":6, "y":5.5, "w":1.75},
+                {"label":"KA4 (B2,B5)", "x":7.75, "y":5.5, "w":2.25},
+                {"label":"KA5 (B2,B7)", "x":10, "y":5.5, "w":1.25},
+                {"label":"KB5 (D7,B7)", "x":11.25, "y":5.5, "w":1.25},
+                {"label":"KA6 (B2,D5)", "x":12.5, "y":5.5, "w":1.25},
+                {"label":"KB6 (D7,D5)", "x":13.75, "y":5.5, "w":1.25},
+                {"label":"KA7 (B2,C7)", "x":15.25, "y":5.5},
+                {"label":"KB7 (D7,C7)", "x":16.25, "y":5.5},
+                {"label":"KA8 (B2,F1)", "x":17.25, "y":5.5},
+                {"label":"KB8 (D7,F1)", "x":18.5, "y":5.5, "w":2},
+                {"label":"KB9 (D7,F5)", "x":20.5, "y":5.5}
+            ]
+        }
+    }
+}
+

keyboards/clawsome/suv/keymap/default/keymap.c

@@ -0,0 +1,30 @@
+/* Copyright 2021 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,    KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,            KC_INS,  KC_HOME, KC_PGUP,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,        KC_DEL,  KC_END,  KC_PGDN,   KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                                             KC_P4,   KC_P5,   KC_P6,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,                            KC_UP,              KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_LCTL,   KC_LGUI,   KC_LALT,   KC_SPC,              KC_SPC,        KC_SPC,              KC_LALT,   KC_LGUI,   KC_MENU,   KC_LCTL,      KC_LEFT, KC_DOWN, KC_RGHT,   KC_P0,            KC_PDOT
+    ),
+
+};
+

keyboards/clawsome/suv/readme.md

@@ -0,0 +1,13 @@
+# SUV
+
+This is 100% keyboard with the standard layout of a 104-key setup.
+
+- Keyboard Maintainer: [AAClawson](https://github.com/AlisGraveNil)
+- Hardware Supported: SUV, Elite-C
+- Hardware Availability: In stock within the next month
+
+Make example for this keyboard (after setting up your build environment):
+
+    make clawsome/suv:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/clawsome/suv/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/clawsome/suv/suv.c

@@ -0,0 +1,17 @@
+/* Copyright 2021 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "suv.h"

keyboards/clawsome/suv/suv.h

@@ -0,0 +1,41 @@
+/* Copyright 2021 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+    K00,      K01, K11, K02, K12,   K03, K13, K04, K14,    K05, K15, K06, K16,  K07, K17, K08,                      \
+    K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36,       K27, K37, K28,  K38, K29, K39, K2A, \
+    K40,   K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56,     K47, K57, K48,  K58, K49, K59, K4A, \
+    K60,    K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K76,                         K78, K69, K79,      \
+    K80,       K90, K81, K91, K82, K92, K83, K93, K84, K94, K85, K96,                K97,       K98, K89, K99, K8A, \
+    KA0,  KB0,  KA1,  KA2,        KA3,    KA4,        KA5,  KB5,  KA6,  KB6,    KA7, KB7, KA8,  KB8,      KB9       \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   KC_NO, KC_NO }, \
+    { KC_NO, K11,   K12,   K13,   K14,   K15,   K16,   K17,   KC_NO, KC_NO, KC_NO }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A   }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   KC_NO }, \
+    { K40,   K41,   K42,   K43,   K44,   K45,   K46,   K47,   K48,   K49,   K4A   }, \
+    { K50,   K51,   K52,   K53,   K54,   K55,   K56,   K57,   K58,   K59,   KC_NO }, \
+    { K60,   K61,   K62,   K63,   K64,   K65,   KC_NO, KC_NO, KC_NO, K69,   KC_NO }, \
+    { K70,   K71,   K72,   K73,   K74,   K75,   K76,   KC_NO, K78,   K79,   KC_NO }, \
+    { K80,   K81,   K82,   K83,   K84,   K85,   KC_NO, KC_NO, KC_NO, K89,   K8A   }, \
+    { K90,   K91,   K92,   K93,   K94,   KC_NO, K96,   K97,   K98,   K99,   KC_NO }, \
+    { KA0,   KA1,   KA2,   KA3,   KA4,   KA5,   KA6,   KA7,   KA8,   KC_NO, KC_NO }, \
+    { KB0,   KC_NO, KC_NO, KC_NO, KC_NO, KB5,   KB6,   KB7,   KB8,   KB9,   KC_NO }, \
+}

keyboards/fc980c/config.h

@@ -21,11 +21,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
+#define VENDOR_ID       0x4853
 #define PRODUCT_ID      0x980C
 #define DEVICE_VER      0x0100
-#define MANUFACTURER    QMK
+#define MANUFACTURER    Hasu
-#define PRODUCT         Leopold FC980C with QMK
+#define PRODUCT         FC980C
+
+/* Maximum dynamic keymap layers (constrained by EEPROM space) */
+#define DYNAMIC_KEYMAP_LAYER_COUNT 3
 
 /* key matrix size */
 #define MATRIX_ROWS 8

keyboards/fc980c/keymaps/via/keymap.c

@@ -0,0 +1,41 @@
+/*
+Copyright 2017 Balz Guenat
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_PGUP, KC_PGDN,
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS,
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT),
+    [1] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_END,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, KC_APP, _______, KC_HOME, KC_PGDN, KC_END, _______, _______),
+    [2] = LAYOUT(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
+};

keyboards/fc980c/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/gray_studio/cod67/rules.mk

@@ -11,6 +11,9 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = lufa-ms
 
+# This board uses the older unsafe 6k version of lufa-ms
+BOOTLOADER_SIZE = 6144
+
 # Build Options
 #   change yes to no to disable
 #

keyboards/handwired/pteron/keymaps/alzafacon/config.h

@@ -0,0 +1,22 @@
+ /* Copyright 2021 Fidel Coria
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#pragma once
+
+/* override diode direction from keyboard config */
+/* COL2ROW or ROW2COL */
+#undef DIODE_DIRECTION
+#define DIODE_DIRECTION COL2ROW

keyboards/handwired/pteron/keymaps/alzafacon/keymap.c

@@ -0,0 +1,120 @@
+ /* Copyright 2021 Fidel Coria
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#include QMK_KEYBOARD_H
+
+enum pteron_layers {
+  _QWERTY,
+  _LOWER,
+  _RAISE,
+  _ADJUST
+};
+
+
+#define LOWER MO(_LOWER)
+#define RAISE MO(_RAISE)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * +-----------------------------------------+      +-----------------------------------------+
+ * |   `  |   1  |   2  |   3  |   4  |   5  |      |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |      |   Y  |   U  |   I  |   O  |   P  | Del  |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |      |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |      |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * +-------------+------+------+------+------|      |------+------+------+------+-------------+
+ *               |Lower | SPC  | Alt  | GUI  |      | Alt  | GUI  | SPC  |Raise |
+ *               +---------------------------+      +---------------------------+
+ */
+[_QWERTY] = LAYOUT(
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,            KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,            KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_DEL,
+  KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,            KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,            KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT,
+                    LOWER,   KC_SPC,  KC_LALT, KC_LGUI,         KC_RALT, KC_RGUI, KC_SPC,  RAISE
+),
+
+/* Lower
+ * +-----------------------------------------+      +-----------------------------------------+
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |      |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |      |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |      |  F6  |   _  |   +  |   {  |   }  |  |   |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |  F12 |ISO ~ |ISO | |      |      |      |
+ * +-------------+------+------+------+------|      |------+------+------+------+-------------+
+ *               |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ *               +---------------------------+      +---------------------------+
+ */
+[_LOWER] = LAYOUT(
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,         KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,         KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL,
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,           KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,          KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______,
+                    _______, _______, _______, _______,         KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Raise
+ * +-----------------------------------------+      +-----------------------------------------+
+ * |   `  |   1  |   2  |   3  |   4  |   5  |      |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |   `  |   1  |   2  |   3  |   4  |   5  |      |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |      |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |      |  F12 |ISO # |ISO / |      |      |      |
+ * +-------------+------+------+------+------|      |------+------+------+------+-------------+
+ *               |      |      |      |      |      | Next | Vol- | Vol+ | Play |
+ *               +---------------------------+      +---------------------------+
+ */
+[_RAISE] = LAYOUT(
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,            KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,            KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL,
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,           KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS,
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,          KC_F12,  KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
+                    _______, _______, _______, _______,         KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
+),
+
+/* Adjust (Lower + Raise)
+ * +-----------------------------------------+      +-----------------------------------------+
+ * |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |      | Reset|      |      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |      |      |      |Aud on|AudOff|AGnorm|      |AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|      |------+------+------+------+------+------|
+ * |      |Voice-|Voice+|Mus on|MusOff|MidiOn|      |MidOff|      |      |      |      |      |
+ * +-------------+------+------+------+------|      |------+------+------+------+-------------+
+ *               |      |      |      |      |      |      |      |      |      |      
+ *               +---------------------------+      +---------------------------+
+ */
+[_ADJUST] = LAYOUT(
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,           KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+  _______, RESET,   DEBUG,   _______, _______, _______,         _______, _______, _______, _______, _______, KC_DEL,
+  _______, _______, _______, _______, _______, _______,         _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______,         _______, _______, _______, _______, _______, _______,
+                    _______, _______, _______, _______,         _______, _______, _______, _______
+)
+
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}

keyboards/handwired/pteron/keymaps/alzafacon/readme.md

@@ -0,0 +1,4 @@
+# alzafacon pteron layout
+
+This keymap is for builds with elite-c controllers.
+Also notice `DIODE_DIRECTION COL2ROW`. I prefer to hand-wire this way.

keyboards/handwired/pteron/keymaps/alzafacon/rules.mk

@@ -0,0 +1,2 @@
+# for elite-c
+BOOTLOADER = atmel-dfu

keyboards/kbdfans/kbd67/rev2/info.json

@@ -386,6 +386,81 @@
                 {"x":14, "y":4},
                 {"x":15, "y":4}]
         },
+        "LAYOUT_65_ansi_split_bs_2_right_mods": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+                {"x":15, "y":0},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+                {"x":13.5, "y":1, "w":1.5},
+                {"x":15, "y":1},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":12.75, "y":2, "w":2.25},
+                {"x":15, "y":2},
+
+                {"x":0, "y":3, "w":2.25},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":1.75},
+                {"x":14, "y":3},
+                {"x":15, "y":3},
+
+                {"x":0, "y":4, "w":1.25},
+                {"x":1.25, "y":4, "w":1.25},
+                {"x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"x":10, "y":4, "w":1.5},
+                {"x":11.5, "y":4, "w":1.5},
+                {"x":13, "y":4},
+                {"x":14, "y":4},
+                {"x":15, "y":4}]
+        },
         "LAYOUT_65_iso": {
             "layout": [
                 {"x":0, "y":0},

keyboards/kbdfans/kbd67/rev2/keymaps/rouge8/keymap.c

@@ -26,15 +26,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |----------------------------------------------------------------|
    * |Shift   |  Z|  X|  C|  V|  B|  N|  M| , | . | / |Shift | ↑ |PgDn|
    * |----------------------------------------------------------------|
-   * |Ctrl|Alt |GUI |        Space          |GUI |FN|Ctrl| ← | ↓ | →  |
+   * |Ctrl|Alt |GUI |        Space          |GUI   |FN   | ← | ↓ | →  |
    * `----------------------------------------------------------------'
    */
-[0] = LAYOUT_65_ansi_split_bs(
+[0] = LAYOUT_65_ansi_split_bs_2_right_mods(
   KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_GRV, KC_BSLS, KC_HOME,
   KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL,
   KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
   KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
-  KC_LCTL, KC_LALT, KC_LGUI,                            KC_SPC,                             KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+  KC_LCTL, KC_LALT, KC_LGUI,                            KC_SPC,                             KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
 ),
 
   /* Keymap Fn Layer
@@ -47,14 +47,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |----------------------------------------------------------------|
    * |        |   |   |   |   |   |   |   |End|PDn|Dow|      |   |Vol-|
    * |----------------------------------------------------------------|
-   * |    |    |    |                       |   |   |    |Prv|Ply|Nxt |
+   * |    |    |    |                       |      |     |Prv|Ply|Nxt |
    * `----------------------------------------------------------------'
    */
-[1] = LAYOUT_65_ansi_split_bs(
+[1] = LAYOUT_65_ansi_split_bs_2_right_mods(
   KC_GRV,  KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,_______,  KC_DEL,KC_INS, \
    _______,_______,  KC_UP,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,  KC_UP,_______,     _______,_______,   \
       _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,            _______,KC_VOLU, \
            _______,_______,_______,_______,_______,_______,_______,_______, KC_END,KC_PGDN,KC_DOWN,       _______,_______,KC_VOLD, \
-    _______,  _______,  _______,                     _______,                     _______,_______,_______,KC_MPRV,KC_MPLY,KC_MNXT),
+    _______,  _______,  _______,                     _______,                     _______,_______,KC_MPRV,KC_MPLY,KC_MNXT),
 
 };

keyboards/kbdfans/kbd67/rev2/rev2.h

@@ -70,7 +70,7 @@
     { K40, K41,   KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, KC_NO, K4D,   K4E,   K4F }, \
 }
 
-#define LAYOUT_65_ansi_blocker_splitbs( \
+#define LAYOUT_65_ansi_blocker_split_bs( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
     K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1E, K1F, \
     K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,      K2D,      K2F, \
@@ -85,8 +85,6 @@
     { K40, K41,   KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, KC_NO, K4D,   K4E,   K4F }, \
 }
 
-#define LAYOUT_65_ansi_blocker_split_bs LAYOUT_65_ansi_blocker_splitbs
-
 #define LAYOUT_65_ansi_split_bs( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
     K10,      K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \
@@ -102,6 +100,21 @@
     { K40, K41,   KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C,   K4D,   K4E,   K4F }, \
 }
 
+#define LAYOUT_65_ansi_split_bs_2_right_mods( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
+    K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1E, K1F, \
+    K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,      K2D,      K2F, \
+    K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D,      K3E, K3F, \
+    K40, K41,      K43,           K46,                K4A, K4B,      K4D, K4E, K4F  \
+) \
+{ \
+    { K00, K01,   K02,   K03, K04,   K05,   K06, K07,   K08,   K09,   K0A, K0B, K0C,   K0D,   K0E,   K0F }, \
+    { K10, KC_NO, K12,   K13, K14,   K15,   K16, K17,   K18,   K19,   K1A, K1B, K1C,   K1D,   K1E,   K1F }, \
+    { K20, KC_NO, K22,   K23, K24,   K25,   K26, K27,   K28,   K29,   K2A, K2B, K2C,   K2D,   KC_NO, K2F }, \
+    { K30, KC_NO, K32,   K33, K34,   K35,   K36, K37,   K38,   K39,   K3A, K3B, KC_NO, K3D,   K3E,   K3F }, \
+    { K40, K41,   KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, KC_NO, K4B, K4D,   K4E,   K4F }, \
+}
+
 #define LAYOUT_65_iso( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,      K0E, K0F, \
     K10,      K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      K1F, \
@@ -131,3 +144,5 @@
     { K30, KC_NO, K32,   K33, K34,   K35,   K36, K37,   K38,   K39,   K3A, K3B, KC_NO, K3D,   K3E,   K3F }, \
     { K40, K41,   KC_NO, K43, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C,   K4D, K4E,   K4F }, \
 }
+
+#define LAYOUT_65_ansi_blocker_splitbs LAYOUT_65_ansi_blocker_split_bs

keyboards/keebio/iris/keymaps/compilation-error/config.h

@@ -0,0 +1,21 @@
+/*
+Copyright 2017 Danny Nguyen <[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+// #define USE_I2C
+#define EE_HANDS

keyboards/keebio/iris/keymaps/compilation-error/keymap.c

@@ -0,0 +1,149 @@
+ /* Copyright 2021 Romeet Chhabra 
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+
+#include QMK_KEYBOARD_H
+
+
+enum custom_layers {
+    _QWERTY,
+    _LOWER,
+    _RAISE,
+    _ADJUST,
+};
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+  ADJUST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [_QWERTY] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                               KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                               KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     LALT_T(KC_ESC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                               KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_MUTE,           KC_PSCR,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+                                    KC_LGUI, LOWER,   KC_SPC,                    KC_ENT,  RAISE,   KC_LCTL
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+
+  [_LOWER] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     RGB_TOG, _______, KC_BTN3,   _______, KC_LBRC,  KC_RBRC,                            KC_EQL, KC_P7, KC_P8, KC_P9, KC_PSLS, KC_DEL,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_BTN4, KC_BTN1, KC_MS_U, KC_BTN2, KC_LCBR, KC_RCBR,                            KC_PLUS,  KC_P4,   KC_P5,   KC_P6,  KC_PAST,  _______,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_BTN5,  KC_MS_L, KC_MS_D, KC_MS_R, KC_LT,   KC_GT,                            KC_MINS, KC_P1,   KC_P2,   KC_P3,   KC_PMNS, _______,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______, _______, _______, _______, _______, _______, _______,          _______, KC_UNDS, KC_P0,   KC_PDOT,   KC_PENT,   KC_PPLS, _______,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+                                    _______, _______, _______,                    _______,  MO(_ADJUST), _______
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+
+  [_RAISE] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_F12,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                              KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     _______, _______, _______,   _______, _______,  _______,                            KC_LBRC, KC_LCBR, KC_LT, KC_GT, KC_RCBR, KC_RBRC,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     _______, _______, _______, _______, _______, _______,                            KC_PGUP,  KC_MINS, KC_UNDS, KC_EQL, KC_PLUS, KC_PGDN,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     _______, _______, _______, _______, _______, _______, _______,          _______, KC_HOME, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_END,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+                                    _______, MO(_ADJUST), _______,                   _______, _______, _______
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  ),
+
+  [_ADJUST] = LAYOUT(
+  //┌────────┬────────┬────────┬────────┬────────┬────────┐                          ┌────────┬────────┬────────┬────────┬────────┬────────┐
+     KC_F12,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                              KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     RGB_TOG, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                            KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+  //├────────┼────────┼────────┼────────┼────────┼────────┤                          ├────────┼────────┼────────┼────────┼────────┼────────┤
+     RGB_MOD, KC_MPRV, KC_MNXT, KC_VOLU, KC_PGUP, KC_UNDS,                            KC_EQL,  KC_HOME, RGB_HUI, RGB_SAI, RGB_VAI, _______,
+  //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐        ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤
+     KC_MUTE, KC_MSTP, KC_MPLY, KC_VOLD, KC_PGDN, KC_MINS, RESET,          EEP_RST, KC_PLUS, KC_END,  RGB_HUD, RGB_SAD, RGB_VAD, _______,
+  //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘        └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘
+                                    _______, _______, _______,                   _______, _______, _______
+                                // └────────┴────────┴────────┘                 └────────┴────────┴────────┘
+  )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        set_single_persistent_default_layer(_QWERTY);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}
+
+bool encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    }
+    else if (index == 1) {
+        if (clockwise) {
+            tap_code(KC_WH_D);
+        } else {
+            tap_code(KC_WH_U);
+        }
+    }
+    return true;
+}

keyboards/keebio/iris/keymaps/compilation-error/rules.mk

@@ -0,0 +1 @@
+MOUSEKEY_ENABLE = yes        # Mouse keys

keyboards/lazydesigners/the60/readme.md

@@ -1,18 +1,19 @@
 # THE60
 
-![THE60](https://cdn.discordapp.com/attachments/536190211240099840/549506683064287243/image0.jpg)
+60% keyboards designed by LAZYDESIGNERS
 
-A 60% custom PCB and case designed and produced by [LazyDesigners](http://lazydesigners.cn).  
+1. [Rev1](rev1/): A special layout PCB for tray mounted case released in early 2019.   
-The PCB allows one to test a 40% layout in a 60% case.
+2. [Rev2](rev2/): THE60 Round 2 released in 2021. Top mounted.
 
-Keyboard Maintainer: QMK Community  
+ **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the appropriate rev for your board.
-Hardware Supported: THE60 PCB  
-Hardware Availability: Check for GBs on [Geekhack](https://geekhack.org) and on [LazyDesigner's homepage.](http://lazydesigners.cn)  
 
-Make example for this keyboard (after setting up your build environment):
+* Keyboard Maintainer: [Jacky@LAZYDESIGNERS] (https://github.com/jackytrabbit)
+* Hardware Supported: THE60 rev1, THE60 rev2
+* Hardware Availability: www.lazydesigners.cn
 
-    make lazydesigners/the60:default:dfu
+Make examples for this keyboard (after setting up your build environment):
 
-To enter the bootloader, either short the pins on the PCB, use the RESET button on the FN layer or hold the Esc key while plugging in your keyboard.
+    make lazydesigners/the60/rev1:default
+    make lazydesigners/the60/rev2:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/lazydesigners/the60/rev1/config.h

@@ -7,7 +7,7 @@
 #define PRODUCT_ID      0x0060
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    LazyDesigners
-#define PRODUCT         THE60
+#define PRODUCT         THE60 rev1
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/lazydesigners/the60/rev1/info.json

@@ -1,5 +1,5 @@
 {
-    "keyboard_name": "THE60",
+    "keyboard_name": "THE60 rev1",
     "url": "http://lazydesigners.cn",
     "maintainer": "qmk",
     "width": 15,

keyboards/lazydesigners/the60/rev1/readme.md

@@ -0,0 +1,18 @@
+# THE60
+
+![THE60](https://cdn.discordapp.com/attachments/536190211240099840/549506683064287243/image0.jpg)
+
+A 60% custom PCB and case designed and produced by [LazyDesigners](http://lazydesigners.cn).  
+The PCB allows one to test a 40% layout in a 60% case.
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: THE60 PCB  
+Hardware Availability: Check for GBs on [Geekhack](https://geekhack.org) and on [LazyDesigner's homepage.](http://lazydesigners.cn)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make lazydesigners/the60/rev1:default
+
+To enter the bootloader, either short the pins on the PCB, use the RESET button on the FN layer or hold the Esc key while plugging in your keyboard.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/lazydesigners/the60/rev1/rev1.c

@@ -0,0 +1,2 @@
+#include "rev1.h"
+

keyboards/lazydesigners/the60/rev1/rules.mk

@@ -2,13 +2,6 @@
 MCU = atmega32u4
 
 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = atmel-dfu
 
 # Build Options

keyboards/lazydesigners/the60/rev2/config.h

@@ -0,0 +1,51 @@
+/*
+ Copyright 2021 LAZYDESIGNERS
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4c44 // "LD"
+#define PRODUCT_ID      0x0062
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    LAZYDESIGNERS
+#define PRODUCT         THE60 rev2
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+#define MATRIX_ROW_PINS { B1, B2, B3, F0, F1 }
+#define MATRIX_COL_PINS { F4, F7, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3 }
+
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+#define RGB_DI_PIN D1
+#ifdef RGB_DI_PIN
+    #define RGBLED_NUM 10
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+    #define RGBLIGHT_SLEEP  
+    #define RGBLIGHT_ANIMATIONS
+#endif
+

keyboards/lazydesigners/the60/rev2/info.json

@@ -0,0 +1,471 @@
+{
+    "keyboard_name": "THE60rev2",
+    "url": "http://lazydesigners.cn",
+    "maintainer": "LAZYDESIGNERS",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Delete", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"CapsLock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"~", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Delete", "x":12.25, "y":3},
+                {"label":"Shift", "x":13.25, "y":3, "w":1.75},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.5},
+                {"label":"Win", "x":1.5, "y":4},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+                {"label":"Space","x":4, "y":4, "w":2.25},
+                {"label":"Fn","x":6.25, "y":4},
+                {"label":"Space","x":7.25, "y":4, "w":2.75},
+                {"label":"Alt", "x":10, "y":4},
+                {"label":"Win", "x":11, "y":4, "w":1.5},
+                {"label":"Menu", "x":12.5, "y":4},
+                {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}
+            ]
+        },
+        "LAYOUT_wkl_standard": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Delete", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"CapsLock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Delete", "x":12.25, "y":3},
+                {"label":"Shift", "x":13.25, "y":3, "w":1.75},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.5},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+                {"label":"Space","x":4, "y":4, "w":7},
+                {"label":"Win", "x":11, "y":4, "w":1.5},
+                {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}
+            ]
+        },
+        "LAYOUT_hhkb_standard": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Delete", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"CapsLock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Delete", "x":12.25, "y":3},
+                {"label":"Shift", "x":13.25, "y":3, "w":1.75},
+                {"label":"Win", "x":1.5, "y":4},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+                {"label":"Space","x":4, "y":4, "w":7},
+                {"label":"Win", "x":11, "y":4, "w":1.5},
+                {"label":"Menu", "x":12.5, "y":4}
+            ]
+        },
+        "LAYOUT_wkl_iso": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Delete", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"CapsLock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"|", "x":12.75, "y":2},
+                {"label":"Enter", "x":13.75, "y":1, "w":1.25,"h":2},
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"~", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Delete", "x":12.25, "y":3},
+                {"label":"Shift", "x":13.25, "y":3, "w":1.75},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.5},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+                {"label":"Space","x":4, "y":4, "w":7},
+                {"label":"Win", "x":11, "y":4, "w":1.5},
+                {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}
+            ]
+        },
+        "LAYOUT_hhkb_iso": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Delete", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"CapsLock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"|", "x":12.75, "y":2},
+                {"label":"Enter", "x":13.75, "y":1, "w":1.25,"h":2},
+                {"label":"Shift", "x":0, "y":3, "w":1.25},
+                {"label":"~", "x":1.25, "y":3},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Delete", "x":12.25, "y":3},
+                {"label":"Shift", "x":13.25, "y":3, "w":1.75},
+                {"label":"Win", "x":1.5, "y":4},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+                {"label":"Space","x":4, "y":4, "w":7},
+                {"label":"Win", "x":11, "y":4, "w":1.5},
+                {"label":"Menu", "x":12.5, "y":4}
+            ]
+        },
+        "LAYOUT_wkl_splitspace": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Delete", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"CapsLock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Delete", "x":12.25, "y":3},
+                {"label":"Shift", "x":13.25, "y":3, "w":1.75},
+                {"label":"Ctrl", "x":0, "y":4, "w":1.5},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+                {"label":"Space","x":4, "y":4, "w":2.25},
+                {"label":"Fn","x":6.25, "y":4},
+                {"label":"Space","x":7.25, "y":4, "w":2.75},
+                {"label":"Alt", "x":10, "y":4},
+                {"label":"Win", "x":11, "y":4, "w":1.5},
+                {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}
+            ]
+        },
+        "LAYOUT_hhkb_splitspace": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"!", "x":1, "y":0},
+                {"label":"@", "x":2, "y":0},
+                {"label":"#", "x":3, "y":0},
+                {"label":"$", "x":4, "y":0},
+                {"label":"%", "x":5, "y":0},
+                {"label":"^", "x":6, "y":0},
+                {"label":"&", "x":7, "y":0},
+                {"label":"*", "x":8, "y":0},
+                {"label":"(", "x":9, "y":0},
+                {"label":")", "x":10, "y":0},
+                {"label":"_", "x":11, "y":0},
+                {"label":"+", "x":12, "y":0},
+                {"label":"Backspace", "x":13, "y":0},
+                {"label":"Delete", "x":14, "y":0},
+                {"label":"Tab", "x":0, "y":1, "w":1.5},
+                {"label":"Q", "x":1.5, "y":1},
+                {"label":"W", "x":2.5, "y":1},
+                {"label":"E", "x":3.5, "y":1},
+                {"label":"R", "x":4.5, "y":1},
+                {"label":"T", "x":5.5, "y":1},
+                {"label":"Y", "x":6.5, "y":1},
+                {"label":"U", "x":7.5, "y":1},
+                {"label":"I", "x":8.5, "y":1},
+                {"label":"O", "x":9.5, "y":1},
+                {"label":"P", "x":10.5, "y":1},
+                {"label":"{", "x":11.5, "y":1},
+                {"label":"}", "x":12.5, "y":1},
+                {"label":"|", "x":13.5, "y":1, "w":1.5},
+                {"label":"CapsLock", "x":0, "y":2, "w":1.75},
+                {"label":"A", "x":1.75, "y":2},
+                {"label":"S", "x":2.75, "y":2},
+                {"label":"D", "x":3.75, "y":2},
+                {"label":"F", "x":4.75, "y":2},
+                {"label":"G", "x":5.75, "y":2},
+                {"label":"H", "x":6.75, "y":2},
+                {"label":"J", "x":7.75, "y":2},
+                {"label":"K", "x":8.75, "y":2},
+                {"label":"L", "x":9.75, "y":2},
+                {"label":":", "x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+                {"label":"Shift", "x":0, "y":3, "w":2.25},
+                {"label":"Z", "x":2.25, "y":3},
+                {"label":"X", "x":3.25, "y":3},
+                {"label":"C", "x":4.25, "y":3},
+                {"label":"V", "x":5.25, "y":3},
+                {"label":"B", "x":6.25, "y":3},
+                {"label":"N", "x":7.25, "y":3},
+                {"label":"M", "x":8.25, "y":3},
+                {"label":"<", "x":9.25, "y":3},
+                {"label":">", "x":10.25, "y":3},
+                {"label":"?", "x":11.25, "y":3},
+                {"label":"Delete", "x":12.25, "y":3},
+                {"label":"Shift", "x":13.25, "y":3, "w":1.75},
+                {"label":"Win", "x":1.5, "y":4},
+                {"label":"Alt", "x":2.5, "y":4, "w":1.5},
+                {"label":"Space","x":4, "y":4, "w":2.25},
+                {"label":"Fn","x":6.25, "y":4},
+                {"label":"Space","x":7.25, "y":4, "w":2.75},
+                {"label":"Alt", "x":10, "y":4},
+                {"label":"Win", "x":11, "y":4, "w":1.5},
+                {"label":"Menu", "x":12.5, "y":4}
+            ]
+        }
+    }
+}

keyboards/lazydesigners/the60/rev2/keymaps/default/keymap.c

@@ -0,0 +1,49 @@
+/*
+ Copyright 2021 LAZYDESIGNERS
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_all( 
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,
+        KC_LSFT, KC_BSLS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, MO(1),
+        KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,                    KC_RALT, KC_RGUI, KC_APP,  KC_RCTL
+        ),
+    [1] = LAYOUT_all(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_BSPC,
+        _______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP,   _______, KC_MPRV, KC_MPLY, KC_MNXT,          BL_STEP,
+        _______, KC_HOME, KC_PGDN, KC_END,  _______, KC_VOLD, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,                   _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          KC_PSCR, _______,
+        _______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______
+        ),
+    [2] = LAYOUT_all(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______
+        ),
+    [3] = LAYOUT_all( 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______
+        ),
+};

keyboards/lazydesigners/the60/rev2/keymaps/via/keymap.c

@@ -0,0 +1,49 @@
+/*
+ Copyright 2021 LAZYDESIGNERS
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_all( 
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,                   KC_ENT,
+        KC_LSFT, KC_BSLS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT, MO(1),
+        KC_LCTL, KC_LGUI, KC_LALT,          KC_SPC,           KC_SPC,           KC_SPC,                    KC_RALT, KC_RGUI, KC_APP,  KC_RCTL
+        ),
+    [1] = LAYOUT_all(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_BSPC,
+        _______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP,   _______, KC_MPRV, KC_MPLY, KC_MNXT,          BL_STEP,
+        _______, KC_HOME, KC_PGDN, KC_END,  _______, KC_VOLD, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,                   _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          KC_PSCR, _______,
+        _______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______
+        ),
+    [2] = LAYOUT_all(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______
+        ),
+    [3] = LAYOUT_all( 
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+        _______, _______, _______,          _______,          _______,          _______,                   _______, _______, _______, _______
+        ),
+};

keyboards/lazydesigners/the60/rev2/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/lazydesigners/the60/rev2/readme.md

@@ -0,0 +1,21 @@
+# THE60Rev2
+
+ ![the60rev2](http://lazydesigners.cn/wp-content/uploads/2021/03/THE60R2.40.jpg)
+
+ A 60% keyboard designed and produced in 2021 by [LAZYDESIGNERS](http://lazydesigners.cn).
+
+ * Keyboard Maintainer: [LAZYDESIGNERS](https://github.com/jackytrabbit)
+ * Hardware Supported: THE60 Rev 2 
+ * Hardware Availability: Check [LAZYDESIGNERS's homepage.](http://lazydesigners.cn)
+
+ Make example for this keyboard (after setting up your build environment):
+
+     make lazydesigners/the60/rev2:default
+
+ Flashing example for this keyboard:
+
+     make lazydesigners/the60/rev2:default:flash
+
+ **Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the RESET button on the FN layer.
+
+ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/lazydesigners/the60/rev2/rev2.c

@@ -0,0 +1 @@
+#include "rev2.h"

keyboards/lazydesigners/the60/rev2/rev2.h

@@ -0,0 +1,125 @@
+/*
+ Copyright 2021 LAZYDESIGNERS
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K213, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K312, K313, \
+	K400, K401, K402,       K404,       K406,       K408,             K410, K411, K412, K413  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+	{ K400,  K401,  K402,  KC_NO, K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413 }, \
+}
+
+#define LAYOUT_wkl_standard( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K213, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K312, K313, \
+	K400,       K402,                   K406,                               K411,       K413  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+	{ K400,  K401,  K402,  KC_NO, K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413 }, \
+}
+
+#define LAYOUT_hhkb_standard( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K213, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K312, K313, \
+	      K401, K402,                   K406,                               K411, K412        \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+	{ K400,  K401,  K402,  KC_NO, K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413 }, \
+}
+
+#define LAYOUT_wkl_iso( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,             \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,       K113, K213, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K312, K313, \
+	K400,       K402,       K404,       K406,       K408,             K410, K411,       K413  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+	{ K400,  K401,  K402,  KC_NO, K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413 }, \
+}
+
+#define LAYOUT_hhkb_iso( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,             \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,       K113, K213, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K312, K313, \
+	      K401, K402,       K404,       K406,       K408,             K410, K411, K412        \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+	{ K400,  K401,  K402,  KC_NO, K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413 }, \
+}
+
+#define LAYOUT_wkl_splitspace( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K213, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K312, K313, \
+	K400,       K402,       K404,       K406,       K408,             K410, K411,       K413  \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+	{ K400,  K401,  K402,  KC_NO, K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413 }, \
+}
+
+#define LAYOUT_hhkb_splitspace( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112,       K113, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,             K213, \
+	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K312, K313, \
+	      K401, K402,       K404,       K406,       K408,             K410, K411, K412        \
+) \
+{ \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  K312,  K313 }, \
+	{ K400,  K401,  K402,  KC_NO, K404,  KC_NO, K406,  KC_NO, K408,  KC_NO, K410,  K411,  K412,  K413 }, \
+}

keyboards/lazydesigners/the60/rev2/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/lazydesigners/the60/the60.c

@@ -1,2 +0,0 @@
-#include "the60.h"
-

keyboards/matrix/m12og/readme.md

@@ -1,16 +1,12 @@
 # Matrix 8XV1.2 OG keyboard
 
-![Matrix 8XV1.2 OG](https://raw.githubusercontent.com/yulei/qmk_webusb_tool/master/public/m12og.jpg)
+![Matrix 8XV1.2 OG](https://i.imgur.com/NELL6Sbl.jpg)
 
-This was the Matrix 8XV1.2 OG keyboard made by the Matrix team. Note: this firmware only support ISO/ANSI version,
+This was the Matrix 8XV1.2 OG keyboard made by the Matrix team.  
-and DO NOT support the 8XV1.2 OG ANSI only version.
 
-* Keyboard Maintainer: [astro](https://github.com/yulei)
+There are two versions of the PCB available.
-* Hardware Supported: Matrix 8XV1.2 OG (ISO/ANSI) keyboard
-* Hardware Availability: Matrix Lab
 
-Make example for this keyboard (after setting up your build environment):
+|Version|Features                                             |
-
+|-------|-----------------------------------------------------|
-    make matrix/m12og:default
+|rev1   |Green/Yellow PCB / ARM STM32 controller / ANSI only  |
-
+|rev2   |White PCB / Atmel AVR controller / ANSI/ISO          |
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/matrix/m12og/rev1/boards/m12og_v1/board.c

@@ -0,0 +1,50 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include <hal.h>
+
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+  stm32_clock_init();
+  
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+
+}

keyboards/matrix/m12og/rev1/boards/m12og_v1/board.h

@@ -0,0 +1,142 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Board identifier.
+ */
+#define BOARD_M12OG
+#define BOARD_NAME              "Matrix 12og keyboard"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK            32768
+#define STM32_HSECLK            8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ *
+ * Only xB (128KB Flash) is defined, but it's identical to the
+ * x8 version (64KB Flash) except for the Flash region size in the
+ * linker script. For x8 parts use xB here and change to the x8 linker
+ * script in the project Makefile.
+ */
+#define STM32F103xB
+
+/*
+ * IO pins assignments
+ *
+ * numbering is sorted by onboard/connectors, as from the schematics in
+ * http://www.vcc-gnd.com/read.php?tid=369
+ */
+
+/* on-board */
+#define GPIOA_USBDM             11      // pin 8
+#define GPIOA_USBDP             12      // pin 9
+
+#define GPIOC_OSC32_IN          14
+#define GPIOC_OSC32_OUT         15
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ *   0 - Analog input.
+ *   1 - Push Pull output 10MHz.
+ *   2 - Push Pull output 2MHz.
+ *   3 - Push Pull output 50MHz.
+ *   4 - Digital input.
+ *   5 - Open Drain output 10MHz.
+ *   6 - Open Drain output 2MHz.
+ *   7 - Open Drain output 50MHz.
+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ *   9 - Alternate Push Pull output 10MHz.
+ *   A - Alternate Push Pull output 2MHz.
+ *   B - Alternate Push Pull output 50MHz.
+ *   C - Reserved.
+ *   D - Alternate Open Drain output 10MHz.
+ *   E - Alternate Open Drain output 2MHz.
+ *   F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOACRL            0x88888888      /*  PA7...PA0 */
+#define VAL_GPIOACRH            0x88888888      /* PA15...PA8 */
+#define VAL_GPIOAODR            0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
+#define VAL_GPIOBCRH            0x88888888      /* PB15...PB8 */
+#define VAL_GPIOBODR            0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */
+#define VAL_GPIOCCRH            0x88888888      /* PC15...PC8 */
+#define VAL_GPIOCODR            0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0  - Normal input (XTAL).
+ * PD1  - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
+#define VAL_GPIODODR            0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
+#define VAL_GPIOEODR            0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+#define usb_lld_connect_bus(usbp)	/* always connected */
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+#define usb_lld_disconnect_bus(usbp)	/* always connected */
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */

keyboards/matrix/m12og/rev1/boards/m12og_v1/board.mk

@@ -0,0 +1,5 @@
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/m12og_v1/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/m12og_v1

keyboards/matrix/m12og/rev1/chconf.h

@@ -0,0 +1,40 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/matrix/m12og/rev1/chconf.h -r platforms/chibios/common/configs/chconf.h`
+ */
+
+#pragma once
+
+#define CH_CFG_ST_TIMEDELTA 0
+
+#define CH_CFG_USE_REGISTRY TRUE
+
+#define CH_CFG_USE_WAITEXIT TRUE
+
+#define CH_CFG_USE_CONDVARS TRUE
+
+#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
+
+#define CH_CFG_USE_MESSAGES TRUE
+
+#define CH_CFG_USE_MAILBOXES TRUE
+
+#define CH_CFG_USE_HEAP TRUE
+
+#include_next <chconf.h>

keyboards/matrix/m12og/rev1/config.h

@@ -0,0 +1,54 @@
+/*
+Copyright 2021 kb-elmo<[email protected]>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x4D58
+#define PRODUCT_ID   0x0369
+#define DEVICE_VER   0x0001
+#define MANUFACTURER matrix
+#define PRODUCT      m12og_v1
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 16
+
+/* Keyboard Matrix Assignments */
+
+#define MATRIX_ROW_PINS { A0, A1, A2, A3, A4, A5 }
+#define MATRIX_COL_PINS { C0, C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 }
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Status LEDs */
+#define LED_CAPS_LOCK_PIN B6
+#define LED_SCROLL_LOCK_PIN B5
+
+/* RGB */
+#define RGB_DI_PIN B8
+#define RGBLIGHT_ANIMATIONS
+
+#define RGBLED_NUM 16
+#define RGBLIGHT_SLEEP
+#define WS2812_BYTE_ORDER WS2812_BYTE_ORDER_RGB
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5

keyboards/matrix/m12og/rev1/halconf.h

@@ -0,0 +1,26 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/matrix/m12og/rev1/halconf.h -r platforms/chibios/common/configs/halconf.h`
+ */
+
+#pragma once
+
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>

keyboards/matrix/m12og/rev1/info.json

@@ -0,0 +1,99 @@
+{
+    "keyboard_name": "Matrix 8XV1.2 OG rev1",
+    "url": "",
+    "maintainer": "kb-elmo",
+    "width": 18.25,
+    "height": 6.5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"F1", "x":2, "y":0},
+                {"label":"F2", "x":3, "y":0},
+                {"label":"F3", "x":4, "y":0},
+                {"label":"F4", "x":5, "y":0},
+                {"label":"F5", "x":6.5, "y":0},
+                {"label":"F6", "x":7.5, "y":0},
+                {"label":"F7", "x":8.5, "y":0},
+                {"label":"F8", "x":9.5, "y":0},
+                {"label":"F9", "x":11, "y":0},
+                {"label":"F10", "x":12, "y":0},
+                {"label":"F11", "x":13, "y":0},
+                {"label":"F12", "x":14, "y":0},
+                {"label":"PrtSc", "x":15.25, "y":0},
+                {"label":"Scroll Lock", "x":16.25, "y":0},
+                {"label":"Pause", "x":17.25, "y":0},
+                {"label":"~", "x":0, "y":1.5},
+                {"label":"!", "x":1, "y":1.5},
+                {"label":"@", "x":2, "y":1.5},
+                {"label":"#", "x":3, "y":1.5},
+                {"label":"$", "x":4, "y":1.5},
+                {"label":"%", "x":5, "y":1.5},
+                {"label":"^", "x":6, "y":1.5},
+                {"label":"&", "x":7, "y":1.5},
+                {"label":"*", "x":8, "y":1.5},
+                {"label":"(", "x":9, "y":1.5},
+                {"label":")", "x":10, "y":1.5},
+                {"label":"_", "x":11, "y":1.5},
+                {"label":"+", "x":12, "y":1.5},
+                {"label":"Backspace", "x":13, "y":1.5, "w":2},
+                {"label":"Insert", "x":15.25, "y":1.5},
+                {"label":"Home", "x":16.25, "y":1.5},
+                {"label":"PgUp", "x":17.25, "y":1.5},
+                {"label":"Tab", "x":0, "y":2.5, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2.5},
+                {"label":"W", "x":2.5, "y":2.5},
+                {"label":"E", "x":3.5, "y":2.5},
+                {"label":"R", "x":4.5, "y":2.5},
+                {"label":"T", "x":5.5, "y":2.5},
+                {"label":"Y", "x":6.5, "y":2.5},
+                {"label":"U", "x":7.5, "y":2.5},
+                {"label":"I", "x":8.5, "y":2.5},
+                {"label":"O", "x":9.5, "y":2.5},
+                {"label":"P", "x":10.5, "y":2.5},
+                {"label":"{", "x":11.5, "y":2.5},
+                {"label":"}", "x":12.5, "y":2.5},
+                {"label":"|", "x":13.5, "y":2.5, "w":1.5},
+                {"label":"Delete", "x":15.25, "y":2.5},
+                {"label":"End", "x":16.25, "y":2.5},
+                {"label":"PgDn", "x":17.25, "y":2.5},
+                {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75},
+                {"label":"A", "x":1.75, "y":3.5},
+                {"label":"S", "x":2.75, "y":3.5},
+                {"label":"D", "x":3.75, "y":3.5},
+                {"label":"F", "x":4.75, "y":3.5},
+                {"label":"G", "x":5.75, "y":3.5},
+                {"label":"H", "x":6.75, "y":3.5},
+                {"label":"J", "x":7.75, "y":3.5},
+                {"label":"K", "x":8.75, "y":3.5},
+                {"label":"L", "x":9.75, "y":3.5},
+                {"label":":", "x":10.75, "y":3.5},
+                {"label":"\"", "x":11.75, "y":3.5},
+                {"label":"Enter", "x":12.75, "y":3.5, "w":2.25},
+                {"label":"Shift", "x":0, "y":4.5, "w":2.25},
+                {"label":"Z", "x":2.25, "y":4.5},
+                {"label":"X", "x":3.25, "y":4.5},
+                {"label":"C", "x":4.25, "y":4.5},
+                {"label":"V", "x":5.25, "y":4.5},
+                {"label":"B", "x":6.25, "y":4.5},
+                {"label":"N", "x":7.25, "y":4.5},
+                {"label":"M", "x":8.25, "y":4.5},
+                {"label":"<", "x":9.25, "y":4.5},
+                {"label":">", "x":10.25, "y":4.5},
+                {"label":"?", "x":11.25, "y":4.5},
+                {"label":"Shift", "x":12.25, "y":4.5, "w":2.75},
+                {"label":"\u2191", "x":16.25, "y":4.5},
+                {"label":"Ctrl", "x":0, "y":5.5, "w":1.5},
+                {"label":"Win", "x":1.5, "y":5.5},
+                {"label":"Alt", "x":2.5, "y":5.5, "w":1.5},
+                {"x":4, "y":5.5, "w":7},
+                {"label":"Win", "x":11, "y":5.5, "w":1.5},
+                {"label":"Menu", "x":12.5, "y":5.5},
+                {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5},
+                {"label":"\u2190", "x":15.25, "y":5.5},
+                {"label":"\u2193", "x":16.25, "y":5.5},
+                {"label":"\u2192", "x":17.25, "y":5.5}
+            ]
+        }
+    }
+}

keyboards/matrix/m12og/rev1/keymaps/default/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2021 kb-elmo<[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_all(
+    KC_ESC,       KC_F1,   KC_F2,   KC_F3,   KC_F4,     KC_F5,   KC_F6,   KC_F7,   KC_F8,     KC_F9,   KC_F10,  KC_F11,  KC_F12,      KC_PSCR, KC_SLCK, KC_PAUS,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,     KC_INS,  KC_HOME, KC_PGUP,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,     KC_DEL,  KC_END,  KC_PGDN,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,      KC_ENT,
+    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,                       KC_UP,
+    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                                               KC_RALT, MO(1),   KC_LCTL,     KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+  [1] = LAYOUT_all(
+    KC_TRNS,     RGB_TOG, RGB_MOD, RGB_RMOD, KC_TRNS,   RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD,   RGB_SAI, RGB_SAD, RGB_SPI, RGB_SPD,     KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,      KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_MPRV, KC_MNXT, KC_MPLY,          KC_TRNS,                       KC_TRNS,
+    KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                                     KC_TRNS, KC_TRNS, KC_TRNS,     KC_TRNS, KC_TRNS, KC_TRNS
+  )
+};
+
+bool led_update_user(led_t led_state) {
+    static uint8_t caps_state = 0;
+    if (caps_state != led_state.caps_lock) {
+        if (led_state.caps_lock) {
+            rgblight_sethsv_noeeprom_cyan();
+            rgblight_mode_noeeprom(1);
+        } else {
+            rgblight_sethsv_noeeprom(5, 255, 255);
+            rgblight_mode_noeeprom(37);
+        }
+        caps_state = led_state.caps_lock;
+    }
+    return true;
+};

keyboards/matrix/m12og/rev1/ld/m12og_v1.ld

@@ -0,0 +1,85 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * STM32F103xB memory setup for use with the matrix 12og mass-storage device bootloader.
+ */
+MEMORY
+{
+    flash0  : org = 0x08018000, len = 128k - 0x18000
+    flash1  : org = 0x00000000, len = 0
+    flash2  : org = 0x00000000, len = 0
+    flash3  : org = 0x00000000, len = 0
+    flash4  : org = 0x00000000, len = 0
+    flash5  : org = 0x00000000, len = 0
+    flash6  : org = 0x00000000, len = 0
+    flash7  : org = 0x00000000, len = 0
+    ram0    : org = 0x20000000, len = 20k
+    ram1    : org = 0x00000000, len = 0
+    ram2    : org = 0x00000000, len = 0
+    ram3    : org = 0x00000000, len = 0
+    ram4    : org = 0x00000000, len = 0
+    ram5    : org = 0x00000000, len = 0
+    ram6    : org = 0x00000000, len = 0
+    ram7    : org = 0x00000000, len = 0
+}
+
+/* For each data/text section two region are defined, a virtual region
+   and a load region (_LMA suffix).*/
+
+/* Flash region to be used for exception vectors.*/
+REGION_ALIAS("VECTORS_FLASH", flash0);
+REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for constructors and destructors.*/
+REGION_ALIAS("XTORS_FLASH", flash0);
+REGION_ALIAS("XTORS_FLASH_LMA", flash0);
+
+/* Flash region to be used for code text.*/
+REGION_ALIAS("TEXT_FLASH", flash0);
+REGION_ALIAS("TEXT_FLASH_LMA", flash0);
+
+/* Flash region to be used for read only data.*/
+REGION_ALIAS("RODATA_FLASH", flash0);
+REGION_ALIAS("RODATA_FLASH_LMA", flash0);
+
+/* Flash region to be used for various.*/
+REGION_ALIAS("VARIOUS_FLASH", flash0);
+REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
+
+/* Flash region to be used for RAM(n) initialization data.*/
+REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
+
+/* RAM region to be used for Main stack. This stack accommodates the processing
+   of all exceptions and interrupts.*/
+REGION_ALIAS("MAIN_STACK_RAM", ram0);
+
+/* RAM region to be used for the process stack. This is the stack used by
+   the main() function.*/
+REGION_ALIAS("PROCESS_STACK_RAM", ram0);
+
+/* RAM region to be used for data segment.*/
+REGION_ALIAS("DATA_RAM", ram0);
+REGION_ALIAS("DATA_RAM_LMA", flash0);
+
+/* RAM region to be used for BSS segment.*/
+REGION_ALIAS("BSS_RAM", ram0);
+
+/* RAM region to be used for the default heap.*/
+REGION_ALIAS("HEAP_RAM", ram0);
+
+/* Generic rules inclusion.*/
+INCLUDE rules.ld

keyboards/matrix/m12og/rev1/matrix.c

@@ -0,0 +1,96 @@
+/* Copyright 2021 xyzz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "util.h"
+#include "matrix.h"
+#include "debounce.h"
+#include "quantum.h"
+
+static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+static void select_col(uint8_t col) {
+    setPinOutput(col_pins[col]);
+    writePinHigh(col_pins[col]);
+}
+
+static void unselect_col(uint8_t col) { setPinInputLow(col_pins[col]); }
+
+static void unselect_cols(void) {
+    for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+        setPinInputLow(col_pins[x]);
+    }
+}
+
+static void init_pins(void) {
+    unselect_cols();
+    for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+        setPinInputLow(row_pins[x]);
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    matrix_io_delay();
+
+    // For each row...
+    for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) {
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value    = current_matrix[row_index];
+        matrix_row_t current_row_value = last_row_value;
+
+        // Check row pin state
+        if (readPin(row_pins[row_index]) != 0) {
+            // Pin LO, set col bit
+            current_row_value |= (MATRIX_ROW_SHIFTER << current_col);
+        } else {
+            // Pin HI, clear col bit
+            current_row_value &= ~(MATRIX_ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_row_value)) {
+            matrix_changed |= true;
+            current_matrix[row_index] = current_row_value;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+void matrix_init_custom(void) {
+    // initialize key pins
+    init_pins();
+}
+
+uint8_t matrix_scan_custom(matrix_row_t current_matrix[]) {
+    bool changed = false;
+
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+        changed |= read_rows_on_col(current_matrix, current_col);
+    }
+
+    return (uint8_t)changed;
+}

keyboards/matrix/m12og/rev1/mcuconf.h

@@ -0,0 +1,209 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  TRUE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+#endif /* _MCUCONF_H_ */

keyboards/matrix/m12og/rev1/readme.md

@@ -0,0 +1,26 @@
+# Matrix 8XV1.2 OG keyboard
+
+![Matrix 8XV1.2 OG](https://i.imgur.com/NELL6Sbl.jpg)
+
+This was the Matrix 8XV1.2 OG keyboard made by the Matrix team.  
+Note: This firmware only supports ANSI only version (green/yellow PCB), and DOES NOT support the 8XV1.2 OG ISO/ANSI version.
+
+* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
+* Hardware Supported: Matrix 8XV1.2 OG ANSI only PCB
+* Hardware Availability: Matrix Lab
+
+Make example for this keyboard (after setting up your build environment):
+
+    make matrix/m12og/rev1:default
+
+---
+**Bootloader:**  
+
+Hold down ESC while plugging in the keyboard. The board will show up as a mass storage device on your computer. Drag and drop the compiled firmware .bin file into it. The board will automatically reset and load the new firmware.  
+
+:no_entry: **DO NOT DO THIS ON A MAC OS SYSTEM! IT WILL PERMANENTLY BRICK THE KEYBOARD!!!**
+
+---
+
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/matrix/m12og/rev1/rev1.c

@@ -0,0 +1,27 @@
+/* Copyright 2021 kb-elmo<[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev1.h"
+
+void board_init(void) {
+    writePinLow(A8);
+}
+
+void keyboard_post_init_kb(void) {
+    rgblight_enable_noeeprom();
+    rgblight_sethsv_noeeprom(5, 255, 255);
+    rgblight_mode_noeeprom(37);
+}

keyboards/matrix/m12og/rev1/rev1.h

@@ -0,0 +1,37 @@
+/* Copyright 2021 kb-elmo<[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+#define LAYOUT_all( \
+    k000,   k001, k002, k003, k004,   k005, k006, k007, k008,   k009, k010, k011, k012,   k013, k014, k015, \
+    k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k213,   k313, k114, k115, \
+    k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k113,   k314, k214, k215, \
+    k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311,    k312,                        \
+    k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k410,     k411,                 k412,       \
+    k500, k501, k502,                   k505,                         k506, k507, k508,   k413, k414, k315  \
+) { \
+    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015 }, \
+    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k115 }, \
+    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k214, k215 }, \
+    { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, k315 }, \
+    { k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k410, k411, k412, k413, k414, ____ }, \
+    { k500, k501, k502, ____, ____, k505, k506, k507, k508, ____, ____, ____, ____, ____, ____, ____ }  \
+}

keyboards/matrix/m12og/rev1/rules.mk

@@ -0,0 +1,26 @@
+# MCU name
+MCU = STM32F103
+
+MCU_LDSCRIPT = m12og_v1
+
+BOARD = m12og_v1
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Bootmagic disabled because Matrix bootlaoder uses it's own reset mechanism
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # HAS TO BE ON! Otherwise the custom matrix doesn't work
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+CUSTOM_MATRIX = lite
+SRC += matrix.c

keyboards/matrix/m12og/rev2/info.json

@@ -1,5 +1,5 @@
 {
-  "keyboard_name": "Matrix/8XV1.2OG ISO/ANSI",
+  "keyboard_name": "Matrix 8XV1.2 OG ISO/ANSI",
   "url": "",
   "maintainer": "qmk",
   "width": 18.25,

keyboards/matrix/m12og/rev2/readme.md

@@ -0,0 +1,16 @@
+# Matrix 8XV1.2 OG keyboard
+
+![Matrix 8XV1.2 OG](https://i.imgur.com/NELL6Sbl.jpg)
+
+This was the Matrix 8XV1.2 OG keyboard made by the Matrix team.  
+Note: This firmware only supports ISO/ANSI version (white PCB), and DOES NOT support the 8XV1.2 OG ANSI only version.
+
+* Keyboard Maintainer: [astro](https://github.com/yulei)
+* Hardware Supported: Matrix 8XV1.2 OG (ISO/ANSI) PCB
+* Hardware Availability: Matrix Lab
+
+Make example for this keyboard (after setting up your build environment):
+
+    make matrix/m12og/rev2:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/matrix/m12og/rev2/rev2.c

@@ -1,8 +1,8 @@
 /**
- * m12og.c
+ * rev2.c
  */
 
-#include "m12og.h"
+#include "rev2.h"
 
 void matrix_init_user(void) {
 	setPinOutput(C6);

keyboards/matrix/m12og/rev2/rev2.h

@@ -23,12 +23,12 @@
 }
 
 #define LAYOUT_tkl_iso( \
-    K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,          K500, K501, K502, \
+    K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,   K500, K501, K502, \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,          K503, K504, K505, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,   K503, K504, K505, \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,                K506, K507, K508, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,         K506, K507, K508, \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,                            \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313,                     \
-	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,                      K610,       \
+	K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412,               K610,       \
-	K600, K601, K602,                         K603,                   K604, K605, K606,          K607, K608, K609  \
+	K600, K601, K602,                         K603,                   K604, K605, K606,   K607, K608, K609  \
 ) { \
 	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013  }, \
 	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  KC_NO }, \
@@ -40,11 +40,11 @@
 }
 
 #define LAYOUT_tkl_ansi( \
-    K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,    K500, K501, K502,\
+    K000,       K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,   K500, K501, K502, \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,    K503, K504, K505,\
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013,   K503, K504, K505, \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,    K506, K507, K508,\
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213,   K506, K507, K508, \
 	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313,                     \
-	K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411,       K412,          K610,      \
+	K400,       K402, K403, K404, K405, K406, K407, K408, K409, K410, K411,       K412,         K610,       \
 	K600, K601, K602,                   K603,                         K604, K605, K606,   K607, K608, K609  \
 ) { \
 	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013  }, \

keyboards/ploopyco/trackball_nano/keymaps/default/readme.md

@@ -1,3 +1 @@
-The default keymap for the Ploopy Trackball Mini.
+The default keymap for the Ploopy Trackball Nano.
-
-Note that kits bought from PloopyCo actually ship with the VIA keymap, not this one.

keyboards/preonic/rev3/chconf.h

@@ -0,0 +1,29 @@
+/* Copyright 2021 QMK Contributors
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/preonic/rev3/chconf.h -r platforms/chibios/QMK_PROTON_C/configs/chconf.h`
+ */
+
+#pragma once
+
+#define CH_CFG_ST_RESOLUTION 16
+
+#define CH_CFG_ST_FREQUENCY 10000
+
+#include_next <chconf.h>
+

keyboards/preonic/rev3/config.h

@@ -113,19 +113,19 @@
 /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
 //#define MIDI_TONE_KEYCODE_OCTAVES 1
 
-// #define WS2812_LED_N 2
+/*
-// #define RGBLED_NUM WS2812_LED_N
+ * WS2812 Underglow Matrix options
-// #define WS2812_TIM_N 2
+ */
-// #define WS2812_TIM_CH 2
-// #define PORT_WS2812     GPIOA
-// #define PIN_WS2812      1
-// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
-//#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
-//#define WS2812_EXTERNAL_PULLUP
 #define RGB_DI_PIN A1
 #define RGBLED_NUM 9
 #define RGBLIGHT_ANIMATIONS
 // RGB Matrix support
 #define DRIVER_LED_TOTAL RGBLED_NUM
 
+#define WS2812_PWM_DRIVER PWMD2
+#define WS2812_PWM_CHANNEL 2
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA1_STREAM2
+#define WS2812_DMA_CHANNEL 2
+
 #endif

keyboards/preonic/rev3/mcuconf.h

@@ -0,0 +1,30 @@
+/* Copyright 2021 QMK Contributors
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include_next "mcuconf.h"
+
+// The SysTick timer from the normal quantum/stm32 uses TIM2 -- the WS2812 pin used
+// on the Planck requires the use of TIM2 to run PWM -- rework which timers are
+// allocated for PWM usage.
+#undef STM32_PWM_USE_TIM2
+#undef STM32_PWM_USE_TIM3
+#define STM32_PWM_USE_TIM2 TRUE
+#define STM32_PWM_USE_TIM3 FALSE
+
+// As mentioned above, we need to reallocate the SysTick timer used from
+// TIM2 to TIM3.
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 3

keyboards/preonic/rev3/rules.mk

@@ -21,7 +21,7 @@ AUDIO_ENABLE = yes           # Audio output
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.
-WS2812_DRIVER = bitbang
+WS2812_DRIVER = pwm
 API_SYSEX_ENABLE = no
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/program_yoink/staggered/keymaps/via/keymap.c

@@ -37,8 +37,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_MINS,  KC_1,    KC_2,   KC_3,      KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,  _______,
         KC_EQL, _______, _______, _______,   _______, _______, _______, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT,          _______,
         _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______,          _______,
-        KC_LGUI, KC_LALT,                             _______,                   _______, _______, _______,          _______         
+        KC_LGUI, KC_LALT,                             _______,                   _______, _______, _______,          _______
-    ), 
+    ),
 
     [_LAYER2] = LAYOUT_default(
         KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,
@@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 };
 
 
-void encoder_update_user(uint8_t index, bool clockwise) {
+bool encoder_update_user(uint8_t index, bool clockwise) {
     if (index == 0) {
         if (clockwise) {
             tap_code(KC_VOLU);
@@ -64,4 +64,5 @@ void encoder_update_user(uint8_t index, bool clockwise) {
             tap_code(KC_VOLD);
         }
     }
+    return true;
 }

keyboards/tada68/rules.mk

@@ -11,6 +11,9 @@ MCU = atmega32u4
 #   ATmega328P   USBasp
 BOOTLOADER = lufa-ms
 
+# This board uses the older unsafe 6k version of lufa-ms
+BOOTLOADER_SIZE = 6144
+
 # Build Options
 #   change yes to no to disable
 #

keyboards/tender/macrowo_pad/config.h

@@ -0,0 +1,40 @@
+/* Copyright 2021 swiftrax
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x04D8
+#define PRODUCT_ID      0xE936
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Tender
+#define PRODUCT         Macrowo Pad
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 10
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B5, D7 }
+#define MATRIX_COL_PINS { E6, B4, B6, B2, B3, B1, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+

keyboards/tender/macrowo_pad/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "Macrowo_Pad", 
+    "url": "https//www.github.com/swiftrax", 
+    "maintainer": "swiftrax", 
+    "width": 11.5, 
+    "height": 3, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"0,1", "x":1, "y":0}, {"label":"0,3", "x":3.25, "y":0}, {"label":"0,6", "x":7.25, "y":0}, {"label":"0,8", "x":9.5, "y":0}, {"label":"0,0", "x":0, "y":0.5}, {"label":"0,2", "x":2, "y":0.5}, {"label":"0,7", "x":8.5, "y":0.5}, {"label":"0,9", "x":10.5, "y":0.5}, {"label":"0,4", "x":3.75, "y":1}, {"label":"0,5", "x":6.75, "y":1}, {"label":"1,4", "x":5.25, "y":1.25}, {"label":"1,0", "x":0, "y":1.5}, {"label":"1,2", "x":2, "y":1.5}, {"label":"1,7", "x":8.5, "y":1.5}, {"label":"1,9", "x":10.5, "y":1.5}, {"label":"1,1", "x":1, "y":2}, {"label":"1,3", "x":4.25, "y":2}, {"label":"1,5", "x":6.25, "y":2}, {"label":"1,8", "x":9.5, "y":2}]
+        }
+    }
+}

keyboards/tender/macrowo_pad/keymaps/default/keymap.c

@@ -0,0 +1,56 @@
+/* Copyright 2021 swiftrax
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum custom_keycodes {
+    SAY_OWO = SAFE_RANGE,
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+    case SAY_OWO:
+        if (record->event.pressed) {
+            // when keycode SAY_OWO is pressed
+            SEND_STRING("OWO");
+        } else {
+            // when keycode SAY_OWO is released
+        }
+        break;
+    }
+    return true;
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT(
+		SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,
+		SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,              SAY_OWO,   SAY_OWO,   SAY_OWO),
+  
+	[1] = LAYOUT(
+    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,
+    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,              KC_TRNS,   KC_TRNS,   KC_TRNS)
+};
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return OLED_ROTATION_270;  
+}
+
+void oled_task_user(void) {
+  oled_write_P(PSTR("OWO\nWhat's\nthis?"), false);
+}
+#endif

keyboards/tender/macrowo_pad/keymaps/default/rules.mk

@@ -0,0 +1 @@
+OLED_DRIVER_ENABLE = yes    # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C

keyboards/tender/macrowo_pad/keymaps/via/keymap.c

@@ -0,0 +1,64 @@
+/* Copyright 2021 swiftrax
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum custom_keycodes {
+    SAY_OWO = SAFE_RANGE,
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+    case SAY_OWO:
+        if (record->event.pressed) {
+            // when keycode SAY_OWO is pressed
+            SEND_STRING("OWO");
+        } else {
+            // when keycode SAY_OWO is released
+        }
+        break;
+    }
+    return true;
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[0] = LAYOUT(
+		SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,
+		SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,   SAY_OWO,              SAY_OWO,   SAY_OWO,   SAY_OWO),
+  
+	[1] = LAYOUT(
+    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,
+    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,              KC_TRNS,   KC_TRNS,   KC_TRNS),
+
+	[2] = LAYOUT(
+    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,
+    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,              KC_TRNS,   KC_TRNS,   KC_TRNS),
+
+    [3] = LAYOUT(
+    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,
+    KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,              KC_TRNS,   KC_TRNS,   KC_TRNS)
+};
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return OLED_ROTATION_270;  
+}
+
+void oled_task_user(void) {
+  oled_write_P(PSTR("OWO\nWhat's\nthis?"), false);
+}
+#endif