Set default for USB_SUSPEND_WAKEUP_DELAY to 0/disabled (#12081)

attempting to fix qmk configurator issues

common_features.mk

@@ -17,6 +17,7 @@ SERIAL_PATH := $(QUANTUM_PATH)/serial_link
 
 QUANTUM_SRC += \
     $(QUANTUM_DIR)/quantum.c \
+    $(QUANTUM_DIR)/send_string.c \
     $(QUANTUM_DIR)/bitwise.c \
     $(QUANTUM_DIR)/led.c \
     $(QUANTUM_DIR)/keymap_common.c \

data/mappings/info_config.json

@@ -38,5 +38,9 @@
     "RGBLIGHT_SPLIT": {"info_key": "rgblight.split", "value_type": "bool"},
     "PRODUCT": {"info_key": "keyboard_folder", "to_json": false},
     "PRODUCT_ID": {"info_key": "usb.pid", "value_type": "hex"},
-    "VENDOR_ID": {"info_key": "usb.vid", "value_type": "hex"}
+    "VENDOR_ID": {"info_key": "usb.vid", "value_type": "hex"},
+    "QMK_ESC_OUTPUT": {"info_key": "qmk_lufa_bootloader.esc_output"},
+    "QMK_ESC_INPUT": {"info_key": "qmk_lufa_bootloader.esc_input"},
+    "QMK_LED": {"info_key": "qmk_lufa_bootloader.led"},
+    "QMK_SPEAKER": {"info_key": "qmk_lufa_bootloader.speaker"}
 }

data/schemas/keyboard.jsonschema

@@ -299,6 +299,28 @@
                     "pattern": "^[0-9A-F]x[0-9A-F][0-9A-F][0-9A-F][0-9A-F]"
                 }
             }
+        },
+        "qmk_lufa_bootloader": {
+            "type": "object",
+            "additionalProperties": false,
+            "properties": {
+                "esc_output": {
+                    "type": "string",
+                    "pattern": "^[A-K]\\d{1,2}$"
+                },
+                "esc_input": {
+                    "type": "string",
+                    "pattern": "^[A-K]\\d{1,2}$"
+                },
+                "led": {
+                    "type": "string",
+                    "pattern": "^[A-K]\\d{1,2}$"
+                },
+                "speaker": {
+                    "type": "string",
+                    "pattern": "^[A-K]\\d{1,2}$"
+                }
+            }
         }
     }
 }

docs/feature_split_keyboard.md

@@ -109,6 +109,10 @@ Normally, when a diode is connected to an intersection, it is judged to be left.
 #define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT
 ```
 
+Note that adding a diode at a previously unused intersection will effectively tell the firmware that there is a key held down at that point. You can instruct qmk to ignore that intersection by defining `MATRIX_MASKED` and then defining a `matrix_row_t matrix_mask[MATRIX_ROWS]` array in your keyboard config. Each bit of a single value (starting form the least-significant bit) is used to tell qmk whether or not to pay attention to key presses at that intersection.
+
+While `MATRIX_MASKED` isn't necessary to use `SPLIT_HAND_MATRIX_GRID` successfully, without it you may experience issues trying to suspend your computer with your keyboard attached as the matrix will always report at least one key-press.
+
 #### Handedness by EEPROM
 
 This method sets the keyboard's handedness by setting a flag in the persistent storage (`EEPROM`).  This is checked when the controller first starts up, and determines what half the keyboard is, and how to orient the keyboard layout. 

keyboards/bastardkb/tbk/config.h

@@ -0,0 +1,39 @@
+/* 
+ * Copyright 2021 Quentin LEBASTARD <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#include "config_common.h"
+#define VENDOR_ID 0xA8F8
+#define PRODUCT_ID 0x1828
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Bastard Keyboards
+#define PRODUCT The Bastard Keyboard
+
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 6
+#define DIODE_DIRECTION ROW2COL
+#define MATRIX_ROW_PINS { D7, B5, F7, F6, B6 }
+#define MATRIX_COL_PINS { B4, E6, C6, B1, B3, B2 }
+
+#define RGB_DI_PIN D2
+#define RGBLED_NUM 38
+#define RGBLED_SPLIT { 19, 19 }
+#define RGBLIGHT_SPLIT
+#define RGBLIGHT_ANIMATIONS
+#define DEBOUNCE 5
+#define SOFT_SERIAL_PIN D0
+#define MASTER_RIGHT

keyboards/bastardkb/tbk/info.json

@@ -0,0 +1,71 @@
+{
+    "keyboard_name": "The Bastard Keyboard",
+    "url": "https://bastardkb.com/",
+    "maintainer": "Quentin Lebastard",
+    "width": 17,
+    "height": 8,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"L00", "x":0, "y":0},
+                {"label":"L01", "x":1, "y":0},
+                {"label":"L02", "x":2, "y":0},
+                {"label":"L03", "x":3, "y":0},
+                {"label":"L04", "x":4, "y":0},
+                {"label":"L05", "x":5, "y":0},
+                {"label":"R00", "x":11, "y":0},
+                {"label":"R01", "x":12, "y":0},
+                {"label":"R02", "x":13, "y":0},
+                {"label":"R03", "x":14, "y":0},
+                {"label":"R04", "x":15, "y":0},
+                {"label":"R05", "x":16, "y":0},
+                {"label":"L10", "x":0, "y":1},
+                {"label":"L11", "x":1, "y":1},
+                {"label":"L12", "x":2, "y":1},
+                {"label":"L13", "x":3, "y":1},
+                {"label":"L14", "x":4, "y":1},
+                {"label":"L15", "x":5, "y":1},
+                {"label":"R10", "x":11, "y":1},
+                {"label":"R11", "x":12, "y":1},
+                {"label":"R12", "x":13, "y":1},
+                {"label":"R13", "x":14, "y":1},
+                {"label":"R14", "x":15, "y":1},
+                {"label":"R15", "x":16, "y":1},
+                {"label":"L20", "x":0, "y":2},
+                {"label":"L21", "x":1, "y":2},
+                {"label":"L22", "x":2, "y":2},
+                {"label":"L23", "x":3, "y":2},
+                {"label":"L24", "x":4, "y":2},
+                {"label":"L25", "x":5, "y":2},
+                {"label":"R20", "x":11, "y":2},
+                {"label":"R21", "x":12, "y":2},
+                {"label":"R22", "x":13, "y":2},
+                {"label":"R23", "x":14, "y":2},
+                {"label":"R24", "x":15, "y":2},
+                {"label":"R25", "x":16, "y":2},
+                {"label":"L30", "x":0, "y":3},
+                {"label":"L31", "x":1, "y":3},
+                {"label":"L32", "x":2, "y":3},
+                {"label":"L33", "x":3, "y":3},
+                {"label":"L34", "x":4, "y":3},
+                {"label":"L35", "x":5, "y":3},
+                {"label":"R30", "x":11, "y":3},
+                {"label":"R31", "x":12, "y":3},
+                {"label":"R32", "x":13, "y":3},
+                {"label":"R33", "x":14, "y":3},
+                {"label":"R34", "x":15, "y":3},
+                {"label":"R35", "x":16, "y":3},
+                {"label":"L43", "x":5, "y":4},
+                {"label":"L44", "x":6, "y":4},
+                {"label":"L45", "x":7, "y":4},
+                {"label":"R40", "x":9, "y":4},
+                {"label":"R41", "x":10, "y":4},
+                {"label":"R40", "x":11, "y":4},
+                {"label":"L52", "x":6, "y":5},
+                {"label":"L53", "x":7, "y":5},
+                {"label":"R52", "x":9, "y":5},
+                {"label":"R53", "x":10, "y":5}
+            ]
+        }
+    }
+}

keyboards/bastardkb/tbk/keymaps/default/keymap.c

@@ -0,0 +1,60 @@
+/* 
+ * Copyright 2021 Quentin LEBASTARD <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [0] = LAYOUT_split_4x6_5(
+    KC_ESC,  KC_1, KC_2, KC_3, KC_4, KC_5,			            KC_6, KC_7, KC_8,    KC_9,   KC_0,     KC_BSPC,
+//-------------------------------------------------//-----------------------------------------------------------//
+    KC_TAB,  KC_Q, KC_W, KC_E, KC_R, KC_T,			            KC_Y, KC_U, KC_I,    KC_O,   KC_P,     KC_MINS,
+//-------------------------------------------------//-----------------------------------------------------------//
+    KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G,	                KC_H, KC_J, KC_K,    KC_L,   KC_SCLN,  KC_QUOT,
+//-------------------------------------------------//-----------------------------------------------------------//
+    KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B,                  KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,  KC_BSLS,
+//-------------------------------------------------//-----------------------------------------------------------//
+                        KC_LCTL, KC_SPC, MO(1),		     MO(2),  KC_ENT, KC_RGUI,
+                                 KC_HOME,  KC_BSPC,      KC_DEL, KC_RALT
+  ),
+
+  [1] = LAYOUT_split_4x6_5(
+    KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,			  KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN,  KC_DEL,
+//---------------------------------------------------------//-----------------------------------------------------------//
+    RESET,   _______, _______, _______, _______, KC_LBRC,			  KC_RBRC, KC_P7,   KC_P8,   KC_P9,   _______,  KC_PLUS,
+//---------------------------------------------------------//-----------------------------------------------------------//
+    _______, KC_HOME, KC_PGUP, KC_PGDN, KC_END,  KC_LPRN,	      KC_RPRN, KC_P4,   KC_P5,   KC_P6,   KC_MINS,  KC_PIPE,
+//---------------------------------------------------------//-----------------------------------------------------------//
+    _______, _______, _______, _______, _______, _______,       _______, KC_P1,   KC_P2,   KC_P3,   KC_EQL,   KC_UNDS,
+//---------------------------------------------------------//-----------------------------------------------------------//
+                               KC_LCTL, KC_HOME, KC_TRNS,		    KC_TRNS, KC_RALT, KC_RGUI,
+                                        KC_SPC,  KC_BSPC,       KC_RCTL, KC_ENT
+  ),
+
+  [2] = LAYOUT_split_4x6_5(
+    KC_F12,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,			    KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_F11,
+//---------------------------------------------------------//--------------------------------------------------------------//
+    _______, _______, RGB_RMOD, RGB_TOG, RGB_MOD, KC_LBRC,			  KC_RBRC, _______, KC_NLCK, KC_INS,  KC_SLCK,  KC_MUTE,
+//---------------------------------------------------------//--------------------------------------------------------------//
+    _______, KC_LEFT, KC_UP,    KC_DOWN, KC_RGHT, KC_LPRN,	      KC_RPRN, KC_MPRV, KC_MPLY, KC_MNXT, _______,  KC_VOLU,
+//---------------------------------------------------------//--------------------------------------------------------------//
+    _______, _______, _______,  _______, _______, _______,        _______, _______, _______, _______, _______,  KC_VOLD,
+//---------------------------------------------------------//--------------------------------------------------------------//
+                               KC_LCTL, KC_HOME, KC_TRNS,		    KC_TRNS, KC_RALT, RESET,
+                                        KC_SPC,  KC_BSPC,       KC_RCTL, KC_ENT
+  ),
+};

keyboards/bastardkb/tbk/keymaps/german_gaming/keymap.c

@@ -0,0 +1,90 @@
+/*
+ * Copyright 2021 Joschua Gandert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include QMK_KEYBOARD_H
+#include "keymap_german.h"
+
+
+enum layer_names {
+    _BASE,
+    _GAME, /* WASD shifted right once  */
+    _LOWER,
+    _RAISE,
+    _ADJUST /* when both LOWER and RAISE pressed */
+};
+
+#define RAISE MO(_RAISE)
+#define LOWER MO(_LOWER)
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_split_4x6_5(
+    KC_ESC , KC_1  ,  KC_2  ,  KC_3  , KC_4  , KC_5  ,              KC_6  , KC_7  , KC_8   , KC_9  , KC_0   , DE_SS  ,
+    KC_TAB , KC_Q  ,  KC_W  ,  KC_E  , KC_R  , KC_T  ,              DE_Z  , KC_U  , KC_I   , KC_O  , KC_P   , DE_UDIA,
+    KC_LSFT, KC_A  ,  KC_S  ,  KC_D  , KC_F  , KC_G  ,              KC_H  , KC_J  , KC_K   , KC_L  , DE_ODIA, DE_ADIA,
+    KC_LCTL, DE_Y  ,  KC_X  ,  KC_C  , KC_V  , KC_B  ,              KC_N  , KC_M  , KC_COMM, KC_DOT, DE_MINS, DE_PLUS,
+
+                                  RAISE,  KC_SPC,   KC_LCTL,    KC_RALT,  KC_BSPC,  LOWER,
+                                          KC_ENT,   KC_LALT,    KC_LGUI,  KC_RSFT
+  ),
+
+  [_GAME] = LAYOUT_split_4x6_5(
+    _______, _______, _______, _______, _______, _______,           _______, _______, _______, _______, _______, _______,
+    KC_T   , KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   ,           _______, _______, KC_UP,   _______, _______, _______,
+    KC_G   , KC_LSFT, KC_A   , KC_S   , KC_D   , KC_F   ,           _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+    KC_B   , KC_LCTL, DE_Y   , KC_X   , KC_C   , KC_V   ,           _______, _______, _______, _______, _______, _______,
+
+                                  _______, _______, _______,    _______, _______, _______,
+                                           _______, _______,    _______, _______
+  ),
+
+  [_LOWER] = LAYOUT_split_4x6_5(
+    KC_TILD, KC_EXLM, KC_AT  , KC_HASH, KC_DLR , KC_PERC,           KC_CIRC, KC_AMPR, KC_PSLS, KC_PAST, KC_PMNS, KC_DEL     ,
+    _______, DE_HASH, DE_CIRC, KC_PGUP, DE_LABK, _______,           _______, KC_P7  , KC_P8  , KC_P9  , KC_PPLS, KC_BSPC    ,
+    _______, DE_ACUT, KC_HOME, KC_PGDN, KC_END , KC_LPRN,           KC_RPRN, KC_P4  , KC_P5  , KC_P6  , KC_PDOT, _______    ,
+    _______, KC_PLUS, KC_PIPE, KC_UNDS, _______, _______,           KC_P0  , KC_P1  , KC_P2  , KC_P3  , KC_PENT, KC_KP_EQUAL,
+
+                                  _______, KC_RGHT, _______,    _______, _______, _______,
+                                           KC_LEFT, _______,    RESET  , _______
+  ),
+
+  [_RAISE] = LAYOUT_split_4x6_5(
+    KC_F12 , KC_F1  ,  KC_F2 ,   KC_F3 ,  KC_F4 ,  KC_F5 ,          KC_F6  , KC_F7   , KC_F8   ,  KC_F9  , KC_F10    , KC_F11 ,
+    _______, _______, _______,  KC_UP  , _______, _______,          KC_LALT, KC_INS  , KC_NLCK ,  KC_CALC, KC_PSCREEN, KC_MUTE,
+    _______, _______, KC_LEFT,  KC_DOWN, KC_RGHT, KC_ENT ,          KC_MSEL, KC_MPRV , KC_MPLY ,  KC_MNXT, _______   , KC_VOLU,
+    _______, _______, _______,  _______, _______, _______,          DE_HASH, KC_MYCM , _______ ,  _______, KC_SLCK   , KC_VOLD,
+
+                                  _______, _______, _______,    _______, KC_UP  , _______,
+                                           _______, _______,    _______, KC_DOWN
+  ),
+
+  [_ADJUST] = LAYOUT_split_4x6_5(
+    _______, _______, _______, _______, _______, _______,           _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, RESET  , _______,           _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, DF(_GAME),         _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, DF(_BASE),         _______, _______, _______, _______, _______, _______,
+
+                                   _______, _______, _______,    _______, _______, _______,
+                                            _______, _______,    _______, _______
+  ),
+};
+
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}

keyboards/bastardkb/tbk/keymaps/german_gaming/readme.md

@@ -0,0 +1,24 @@
+![German Gaming Layout Image](https://i.imgur.com/0y938rG.png)
+
+Despite being less accurate, the columns in the image are shifted up and down to avoid the [Hermann grid illusion](https://en.wikipedia.org/wiki/Grid_illusion).
+​
+
+# German Gaming Layout
+​
+This layout was build with gaming in mind for a german user. As a result I added a "game" layer that shifts the keys of the left side (below the number row) one to the right, so that <kbd>WASD</kbd> is on the <kbd>ESDF</kbd> keys. The reason this layer was added is that using <kbd>WASD</kbd> is less comfortable with a contoured Dactyl-style keyboard, where each column is adjusted for the respective fingers. <kbd>ESDF</kbd> also has the upside of allowing one to stay in the home row. Note that the rightmost column of the default layer, so <kbd>TGB</kbd>, ends up in the leftmost position.
+
+Of course, one could just be forced to reconfigure every game, but that wouldn't be very user-friendly and likely reduce satisfaction with the layout. When in game mode, the right side of keys also features arrow keys on <kbd>IJKL</kbd>.
+
+
+## Raise and Lower layer
+
+Additionally, via the RAISE layer, it's always possible to access the arrow keys, which are often used in game menues. On the exact same position one can access <kbd>Home</kbd>, <kbd>End</kbd>, <kbd>Page Down</kbd> and <kbd>Page Up</kbd> via the LOWER layer. The left side of the LOWER layer also contains the few characters that would usually have their own key in a traditional german keyboard.
+
+The right side features various media keys in the RAISE layer, and a numpad in the LOWER layer.
+
+
+## Firmware
+
+The keyboard can be put into Reset mode (for flashing a keymap) by pressing <kbd>**LOWER**</kbd> + <kbd>Super</kbd> (also known as Windows key), or by pressing <kbd>**LOWER**</kbd> + <kbd>**RAISE**</kbd> + <kbd>R</kbd>.
+
+`MOUSEKEY_ENABLE` was set to `no` for this keymap, since it wasn't used and the size of the firmware ended up being too large.

keyboards/bastardkb/tbk/keymaps/german_gaming/rules.mk

@@ -0,0 +1 @@
+MOUSEKEY_ENABLE = no

keyboards/bastardkb/tbk/keymaps/xyverz/config.h

@@ -0,0 +1,33 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <[email protected]>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+/* Select hand configuration */
+// #define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+#define TAPPING_FORCE_HOLD
+#define TAPPING_TERM 300
+#define PERMISSIVE_HOLD
+#define IGNORE_MOD_TAP_INTERRUPT
+#define LEADER_PER_KEY_TIMING
+#define LEADER_TIMEOUT 300

keyboards/bastardkb/tbk/keymaps/xyverz/keymap.c

@@ -0,0 +1,100 @@
+/* 
+ * Copyright 2021 Ian Sterling <xyverz on Github.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum layer_names { _WINDOWS, _MAC, _LOWER, _RAISE, _ADJUST };
+
+enum custom_keycodes { WINDOWS = SAFE_RANGE, MAC, ADJUST };
+
+// Aliases to keep the keymap tidy
+#define GUIBSPC GUI_T(KC_BSPC)  // GUI when held, BSPC when tapped.
+#define RGB_SWR RGB_M_SW        // Swirl Animation alias
+#define RGB_SNK RGB_M_SN        // Snake Animation alias
+#define MACLOCK LGUI(LCTL(KC_Q)) // Lock my MacBook!
+#define WINLOCK LGUI(KC_L)      // Lock my PC!
+#define DELGUI GUI_T(KC_DEL)
+#define RAISE MO(_RAISE)
+#define LOWER MO(_LOWER)
+
+
+#define MACLOCK LGUI(LCTL(KC_Q)) // Lock my MacBook!
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[_WINDOWS] = LAYOUT_split_4x6_5(
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS,
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,        KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH,
+  KC_GRV,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,        KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS,
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,        KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
+                             LOWER,   KC_BSPC, KC_DEL,      KC_ENT,  KC_SPC,  RAISE,
+                                      KC_LCTL, KC_LALT,     KC_RGUI, KC_RCTL
+  ),
+
+[_MAC] = LAYOUT_split_4x6_5(
+  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSLS,
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,        KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH,
+  KC_GRV,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,        KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS,
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,        KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT,
+                             LOWER,   KC_BSPC, DELGUI,      KC_ENT,  KC_SPC,  RAISE,
+                                      KC_LCTL, KC_LALT,     KC_RGUI, KC_RCTL
+  ),
+
+[_LOWER] = LAYOUT_split_4x6_5(
+  KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,       KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12, 
+  RESET,   _______, _______, KC_UP,   _______, _______,     _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______,
+  KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME,     KC_PGUP, _______, KC_PLUS, KC_LCBR, KC_RCBR, _______,
+  _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_END,      KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______,
+                             _______, KC_DEL,  _______,     _______, _______, _______,
+                                      MACLOCK, _______,     _______, WINLOCK
+  ),
+
+[_RAISE] = LAYOUT_split_4x6_5(
+  KC_F11,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,       KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F12, 
+  _______, _______, _______, KC_UP,   _______, _______,     _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, RESET,
+  KC_CAPS, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME,     KC_PGUP, _______, KC_EQL,  KC_LBRC, KC_RBRC, _______,
+  _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_END,      KC_PGDN, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______,
+                             _______, KC_DEL,  _______,     _______, _______, _______,
+                                      MACLOCK, _______,     _______, WINLOCK
+  ),
+
+[_ADJUST] = LAYOUT_split_4x6_5(
+  _______, _______, _______, _______, _______, _______,     _______, _______, _______, _______, _______, _______,
+  _______, RESET,   _______, _______, _______, _______,     _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______,     _______, WINDOWS, MAC,     _______, _______, _______,
+  _______, _______, _______, _______, _______, _______,     _______, _______, _______, _______, _______, _______,
+                             _______, _______, _______,     _______, _______, _______,
+                                      _______, _______,     _______, _______
+  ),
+
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) { return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); };
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+        switch (keycode) {
+            case WINDOWS:
+                set_single_persistent_default_layer(_WINDOWS);
+                return false;
+            case MAC:
+                set_single_persistent_default_layer(_MAC);
+                return false;
+        }
+    }
+    return true;
+}

keyboards/bastardkb/tbk/keymaps/xyverz/readme.md

@@ -0,0 +1,22 @@
+# The Bastard Keyboard
+
+A split ergonomic keyboard.
+
+* Keyboard Maintainer: [Bastard Keyboards](https://github.com/Bastardkb/)
+* Hardware Supported: elite-C V4
+* Hardware Availability: [Bastard Keyboards](https://bastardkb.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bastardkb/tbk:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+See the [keyboard build instructions](https://docs.bastardkb.com)
+
+
+## Important information regarding the reset
+
+If you modify this firmware, make sure to always have a RESET key that can be triggered using only the master side ! This way you ensure that you can always flash the keyboard, even if you mess up.
+
+Otherwise if you're stuck, open the case and reset manually by shorting Gnd and Rst, or pressing the RST button.

keyboards/bastardkb/tbk/readme.md

@@ -0,0 +1,22 @@
+# The Bastard Keyboard
+
+A split ergonomic keyboard.
+
+* Keyboard Maintainer: [Bastard Keyboards](https://github.com/Bastardkb/)
+* Hardware Supported: elite-C V4
+* Hardware Availability: [Bastard Keyboards](https://bastardkb.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bastardkb/tbk:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+See the [keyboard build instructions](https://docs.bastardkb.com)
+
+
+## Important information regarding the reset
+
+If you modify this firmware, make sure to always have a RESET key that can be triggered using only the master side ! This way you ensure that you can always flash the keyboard, even if you mess up.
+
+Otherwise if you're stuck, open the case and reset manually by shorting Gnd and Rst, or pressing the RST button.

keyboards/bastardkb/tbk/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+SPLIT_KEYBOARD = yes

keyboards/bastardkb/tbk/tbk.c

@@ -15,4 +15,4 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "bastylmini.h"
+#include "tbk.h"

keyboards/bastardkb/tbk/tbk.h

@@ -0,0 +1,42 @@
+/* 
+ * Copyright 2021 Quentin LEBASTARD <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#pragma once
+#include "quantum.h"
+
+// SWITCHED 91 and 95 - check on left ?
+#define LAYOUT_split_4x6_5( \
+	k00, k01, k02, k03, k04, k05,			k55, k54, k53, k52, k51, k50, \
+	k10, k11, k12, k13, k14, k15,			k65, k64, k63, k62, k61, k60, \
+	k20, k21, k22, k23, k24, k25,			k75, k74, k73, k72, k71, k70, \
+	k30, k31, k32, k33, k34, k35,			k85, k84, k83, k82, k81, k80, \
+		       k43, k44, k41,		        k91, k94, k93, \
+		            k45, k42,                   k92, k95 \
+)\
+{\
+	{ k00, k01, k02, k03, k04, k05 }, \
+	{ k10, k11, k12, k13, k14, k15 }, \
+	{ k20, k21, k22, k23, k24, k25 }, \
+	{ k30, k31, k32, k33, k34, k35 }, \
+	{ KC_NO, k41, k42, k43, k44, k45 }, \
+	{ k50, k51, k52, k53, k54, k55 }, \
+	{ k60, k61, k62, k63, k64, k65 }, \
+	{ k70, k71, k72, k73, k74, k75 }, \
+	{ k80, k81, k82, k83, k84, k85 }, \
+	{ KC_NO, k91, k92, k93, k94, k95 }, \
+}

keyboards/bastardkb/tbkmini/config.h

@@ -21,7 +21,7 @@
 #define PRODUCT_ID 0x1828
 #define DEVICE_VER 0x0001
 #define MANUFACTURER Bastard Keyboards
-#define PRODUCT Bastyl Mini
+#define PRODUCT TBK Mini
 
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 6

keyboards/bastardkb/tbkmini/info.json

@@ -1,5 +1,5 @@
 {
-    "keyboard_name": "Bastyl Mini",
+    "keyboard_name": "TBK Mini",
     "url": "https://www.bastardkb.com",
     "maintainer": "Quentin Lebastard",
     "width": 17,

keyboards/bastardkb/tbkmini/readme.md

@@ -1,14 +1,14 @@
-# Bastyl Mini
+# TBK Mini
 
 A split, compact ergonomic keyboard.
 
-* Keyboard Maintainer: [BastardKb](https://github.com/Bastardkb/)
+* Keyboard Maintainer: [Bastard Keyboards](https://github.com/Bastardkb/)
 * Hardware Supported: elite-C V4
 * Hardware Availability: [Bastardkb.com](https://bastardkb.com/)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make bastardkb/bastylmini:default
+    make bastardkb/tbkmini:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
 

keyboards/bastardkb/tbkmini/tbkmini.c

@@ -0,0 +1,18 @@
+/* 
+ * Copyright 2021 Quentin LEBASTARD <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "tbkmini.h"

keyboards/eggman/info.json

@@ -5,47 +5,47 @@
     "width": 11.5, 
     "height": 5, 
     "layouts": {
-        "LAYOUT": {
+        "LAYOUT_default": {
             "layout": [
 			{"label":"RE", "x":4.25, "y":0}, 
 			{"label":"RE", "x":6.25, "y":0}, 
-			{"label":"E", "x":2, "y":0.25}, 
-			{"label":"I", "x":8.5, "y":0.25}, 
-			{"label":"W", "x":1, "y":0.5}, 
-			{"label":"O", "x":9.5, "y":0.5}, 
 			{"label":"Q", "x":0, "y":0.75}, 
+			{"label":"W", "x":1, "y":0.5}, 
+			{"label":"E", "x":2, "y":0.25}, 
 			{"label":"R", "x":3, "y":0.75}, 
-			{"label":"U", "x":7.5, "y":0.75}, 
-			{"label":"P", "x":10.5, "y":0.75}, 
 			{"label":"T", "x":4, "y":1}, 
 			{"label":"Delete", "x":5, "y":1, "w":1.5}, 
 			{"label":"Y", "x":6.5, "y":1}, 
-			{"label":"D", "x":2, "y":1.25}, 
+			{"label":"U", "x":7.5, "y":0.75}, 
-			{"label":"K", "x":8.5, "y":1.25}, 
+			{"label":"I", "x":8.5, "y":0.25}, 
-			{"label":"S", "x":1, "y":1.5}, 
+			{"label":"O", "x":9.5, "y":0.5}, 
-			{"label":"L", "x":9.5, "y":1.5}, 
+			{"label":"P", "x":10.5, "y":0.75}, 
 			{"label":"A", "x":0, "y":1.75}, 
+			{"label":"S", "x":1, "y":1.5},  
+			{"label":"D", "x":2, "y":1.25}, 
 			{"label":"F", "x":3, "y":1.75}, 
-			{"label":"J", "x":7.5, "y":1.75}, 
-			{"label":"\"", "x":10.5, "y":1.75}, 
 			{"label":"G", "x":4, "y":2}, 
 			{"label":"Tab", "x":5, "y":2, "w":1.5}, 
 			{"label":"H", "x":6.5, "y":2}, 
-			{"label":"C", "x":2, "y":2.25}, 
+			{"label":"J", "x":7.5, "y":1.75}, 
-			{"label":"<", "x":8.5, "y":2.25}, 
+			{"label":"K", "x":8.5, "y":1.25}, 
-			{"label":"X", "x":1, "y":2.5}, 
+			{"label":"L", "x":9.5, "y":1.5}, 
-			{"label":">", "x":9.5, "y":2.5}, 
+			{"label":"\"", "x":10.5, "y":1.75}, 
 			{"label":"Z", "x":0, "y":2.75}, 
+			{"label":"X", "x":1, "y":2.5}, 
+			{"label":"C", "x":2, "y":2.25}, 
 			{"label":"V", "x":3, "y":2.75}, 
-			{"label":"M", "x":7.5, "y":2.75}, 
-			{"label":"?", "x":10.5, "y":2.75}, 
 			{"label":"B", "x":4, "y":3}, 
-			{"label":"Shift", "x":5, "y":3, "w":1.5}, 
+			{"label":"Shift", "x":5, "y":3, "w":1.5},  
 			{"label":"N", "x":6.5, "y":3}, 
+			{"label":"M", "x":7.5, "y":2.75}, 
+			{"label":"<", "x":8.5, "y":2.25}, 
+			{"label":">", "x":9.5, "y":2.5}, 
+			{"label":"?", "x":10.5, "y":2.75}, 
 			{"label":"Ctrl", "x":2.5, "y":4, "w":1.25}, 
 			{"label":"Backspace", "x":3.75, "y":4, "w":2}, 
 			{"label":"Space", "x":5.75, "y":4, "w":2}, 
-			{"label":"Alt", "x":7.75, "y":4, "w":1.25}]
+			{"label":"Alt", "x":7.75, "y":4, "w":1.25}] 
         }
     }
 }

keyboards/ergodone/ergodone.h

@@ -131,7 +131,7 @@ inline void ergodox_led_all_set(uint8_t n)              {}
     { k10,   k11, k12, k13, k14, k15, k16,      k17,   k18, k19, k1A, k1B, k1C, k1D    }, \
     { k20,   k21, k22, k23, k24, k25, KC_NO,    KC_NO, k28, k29, k2A, k2B, k2C, k2D    }, \
     { k30,   k31, k32, k33, k34, k35, k36,      k37,   k38, k39, k3A, k3B, k3C, k3D    }, \
-    { k40,   k41, k42, k43, k44, k45, k45,      k47,   k48, k49, k4A, k4B, k4C, k4D    }, \
+    { k40,   k41, k42, k43, k44, k45, k46,      k47,   k48, k49, k4A, k4B, k4C, k4D    }, \
     { KC_NO, k51, k52, k53, k54, k55, k56,      k57,   k58, k59, k5A, k5B, k5C, KC_NO  }  \
    }
 

keyboards/k_type/i2c_master.c

@@ -1,145 +0,0 @@
-/* Copyright 2018 Jack Humbert
- * Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/* This library is only valid for STM32 processors.
- * This library follows the convention of the AVR i2c_master library.
- * As a result addresses are expected to be already shifted (addr << 1).
- * I2CD1 is the default driver which corresponds to pins B6 and B7. This
- * can be changed.
- * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
- * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
- * but using any other I2C pins should be trivial.
- */
-#include "quantum.h"
-#include "i2c_master.h"
-#include "print.h"
-#include <string.h>
-#include <hal.h>
-
-static uint8_t i2c_address;
-
-I2CDriver *drivers[I2C_COUNT];
-
-static const I2CConfig i2cconfig = {
-#if defined(USE_I2CV1_CONTRIB)
-    I2C1_CLOCK_SPEED,
-#elif defined(USE_I2CV1)
-    I2C1_OPMODE,
-    I2C1_CLOCK_SPEED,
-    I2C1_DUTY_CYCLE,
-#else
-    // This configures the I2C clock to 400khz assuming a 72Mhz clock
-    // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
-    STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
-#endif
-};
-
-static i2c_status_t chibios_to_qmk(const msg_t* status) {
-    switch (*status) {
-        case I2C_NO_ERROR:
-            return I2C_STATUS_SUCCESS;
-        case I2C_TIMEOUT:
-            return I2C_STATUS_TIMEOUT;
-        // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
-        default:
-            return I2C_STATUS_ERROR;
-    }
-}
-
-__attribute__((weak)) void i2c_init(I2CDriver *driver, ioportid_t scl_port, ioportid_t sda_port, iopadid_t scl_pad, iopadid_t sda_pad) {
-    static uint8_t index = 0;
-    if (index < I2C_COUNT) {
-        
-        // Try releasing special pins for a short time
-        palSetPadMode(scl_port, scl_pad, PAL_MODE_INPUT);
-        palSetPadMode(sda_port, sda_pad, PAL_MODE_INPUT);
-
-        chThdSleepMilliseconds(10);
-
-#if defined(USE_GPIOV1)
-        palSetPadMode(scl_port, scl_pad, I2C1_SCL_PAL_MODE);
-        palSetPadMode(sda_port, sda_pad, I2C1_SDA_PAL_MODE);
-#else
-        palSetPadMode(scl_port, scl_pad, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
-        palSetPadMode(sda_port, sda_pad, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
-#endif
-
-        drivers[index++] = driver;
-    }
-}
-
-i2c_status_t i2c_start(uint8_t index, uint8_t address) {
-    if(index >= I2C_COUNT) {
-        return I2C_STATUS_ERROR;
-    }
-    i2c_address = address;
-    i2cStart(drivers[index], &i2cconfig);
-    return I2C_STATUS_SUCCESS;
-}
-
-i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
-    if(index >= I2C_COUNT) {
-        return I2C_STATUS_ERROR;
-    }
-    i2c_address = address;
-    i2cStart(drivers[index], &i2cconfig);
-    msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout));
-    return chibios_to_qmk(&status);
-}
-
-i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
-    if(index >= I2C_COUNT) {
-        return I2C_STATUS_ERROR;
-    }
-    i2c_address = address;
-    i2cStart(drivers[index], &i2cconfig);
-    msg_t status = i2cMasterReceiveTimeout(drivers[index], (i2c_address >> 1), data, length, TIME_MS2I(timeout));
-    return chibios_to_qmk(&status);
-}
-
-i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
-    if(index >= I2C_COUNT) {
-        return I2C_STATUS_ERROR;
-    }
-    i2c_address = devaddr;
-    i2cStart(drivers[index], &i2cconfig);
-
-    uint8_t complete_packet[length + 1];
-    for (uint8_t i = 0; i < length; i++) {
-        complete_packet[i + 1] = data[i];
-    }
-    complete_packet[0] = regaddr;
-
-    msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout));
-    return chibios_to_qmk(&status);
-}
-
-i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
-    if(index >= I2C_COUNT) {
-        return I2C_STATUS_ERROR;
-    }
-    i2c_address = devaddr;
-    i2cStart(drivers[index], &i2cconfig);
-    msg_t status = i2cMasterTransmitTimeout(drivers[index], (i2c_address >> 1), &regaddr, 1, data, length, TIME_MS2I(timeout));
-    return chibios_to_qmk(&status);
-}
-
-void i2c_stop(uint8_t index) {
-    if(index < I2C_COUNT) {
-        i2cStop(drivers[index]);
-    }
-}

keyboards/k_type/i2c_master.h

@@ -1,127 +0,0 @@
-/* Copyright 2018 Jack Humbert
- * Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-/* This library follows the convention of the AVR i2c_master library.
- * As a result addresses are expected to be already shifted (addr << 1).
- * I2CD1 is the default driver which corresponds to pins B6 and B7. This
- * can be changed.
- * Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
- * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
- */
-#pragma once
-
-#include <ch.h>
-#include <hal.h>
-
-#ifndef I2C_COUNT
-#    define I2C_COUNT 1
-#endif
-
-#ifdef I2C1_BANK
-#    define I2C1_SCL_BANK I2C1_BANK
-#    define I2C1_SDA_BANK I2C1_BANK
-#endif
-
-#ifndef I2C1_SCL_BANK
-#    define I2C1_SCL_BANK GPIOB
-#endif
-
-#ifndef I2C1_SDA_BANK
-#    define I2C1_SDA_BANK GPIOB
-#endif
-
-
-#ifdef USE_I2C2
-#    ifdef I2C2_BANK
-#        define I2C2_SCL_BANK I2C2_BANK
-#        define I2C2_SDA_BANK I2C2_BANK
-#    endif
-#    ifndef I2C2_SCL_BANK
-#        define I2C2_SCL_BANK GPIOC
-#    endif
-#    ifndef I2C2_SDA_BANK
-#        define I2C2_SDA_BANK GPIOC
-#    endif
-#endif
-
-#ifndef I2C1_SCL
-#    define I2C1_SCL 6
-#endif
-#ifndef I2C1_SDA
-#    define I2C1_SDA 7
-#endif
-
-#ifdef USE_I2CV1
-#    ifndef I2C1_OPMODE
-#        define I2C1_OPMODE OPMODE_I2C
-#    endif
-#    ifndef I2C1_CLOCK_SPEED
-#        define I2C1_CLOCK_SPEED 100000 /* 400000 */
-#    endif
-#    ifndef I2C1_DUTY_CYCLE
-#        define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
-#    endif
-#else
-// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
-// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
-#    ifndef I2C1_TIMINGR_PRESC
-#        define I2C1_TIMINGR_PRESC 0U
-#    endif
-#    ifndef I2C1_TIMINGR_SCLDEL
-#        define I2C1_TIMINGR_SCLDEL 7U
-#    endif
-#    ifndef I2C1_TIMINGR_SDADEL
-#        define I2C1_TIMINGR_SDADEL 0U
-#    endif
-#    ifndef I2C1_TIMINGR_SCLH
-#        define I2C1_TIMINGR_SCLH 38U
-#    endif
-#    ifndef I2C1_TIMINGR_SCLL
-#        define I2C1_TIMINGR_SCLL 129U
-#    endif
-#endif
-
-#ifdef USE_GPIOV1
-#    ifndef I2C1_SCL_PAL_MODE
-#        define I2C1_SCL_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
-#    endif
-#    ifndef I2C1_SDA_PAL_MODE
-#        define I2C1_SDA_PAL_MODE PAL_MODE_STM32_ALTERNATE_OPENDRAIN
-#    endif
-#else
-// The default PAL alternate modes are used to signal that the pins are used for I2C
-#    ifndef I2C1_SCL_PAL_MODE
-#        define I2C1_SCL_PAL_MODE 4
-#    endif
-#    ifndef I2C1_SDA_PAL_MODE
-#        define I2C1_SDA_PAL_MODE 4
-#    endif
-#endif
-
-typedef int16_t i2c_status_t;
-
-#define I2C_STATUS_SUCCESS (0)
-#define I2C_STATUS_ERROR (-1)
-#define I2C_STATUS_TIMEOUT (-2)
-
-void         i2c_init(I2CDriver *driver, ioportid_t scl_port, ioportid_t sda_port, iopadid_t scl_pad, iopadid_t sda_pad);
-i2c_status_t i2c_start(uint8_t index, uint8_t address);
-i2c_status_t i2c_transmit(uint8_t index, uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_receive(uint8_t index, uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_writeReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_readReg(uint8_t index, uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-void         i2c_stop(uint8_t index);

keyboards/k_type/is31fl3733.c

@@ -1,231 +0,0 @@
-/* Copyright 2017 Jason Williams
- * Copyright 2018 Jack Humbert
- * Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "is31fl3733.h"
-#include "i2c_master.h"
-#include "wait.h"
-
-// This is a 7-bit address, that gets left-shifted and bit 0
-// set to 0 for write, 1 for read (as per I2C protocol)
-// The address will vary depending on your wiring:
-// 00 <-> GND
-// 01 <-> SCL
-// 10 <-> SDA
-// 11 <-> VCC
-// ADDR1 represents A1:A0 of the 7-bit address.
-// ADDR2 represents A3:A2 of the 7-bit address.
-// The result is: 0b101(ADDR2)(ADDR1)
-#define ISSI_ADDR_DEFAULT 0x50
-
-#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
-#define ISSI_INTERRUPTMASKREGISTER 0xF0
-#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
-
-#define ISSI_PAGE_LEDCONTROL 0x00  // PG0
-#define ISSI_PAGE_PWM 0x01         // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02  // PG2
-#define ISSI_PAGE_FUNCTION 0x03    // PG3
-
-#define ISSI_REG_CONFIGURATION 0x00  // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01  // PG3
-#define ISSI_REG_RESET 0x11          // PG3
-#define ISSI_REG_SWPULLUP 0x0F       // PG3
-#define ISSI_REG_CSPULLUP 0x10       // PG3
-
-#ifndef ISSI_TIMEOUT
-#    define ISSI_TIMEOUT 100
-#endif
-
-#ifndef ISSI_PERSISTENCE
-#    define ISSI_PERSISTENCE 0
-#endif
-
-// Transfer buffer for TWITransmitData()
-uint8_t g_twi_transfer_buffer[20];
-
-// These buffers match the IS31FL3733 PWM registers.
-// The control buffers match the PG0 LED On/Off registers.
-// Storing them like this is optimal for I2C transfers to the registers.
-// We could optimize this and take out the unused registers from these
-// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
-// probably not worth the extra complexity.
-uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
-
-uint8_t g_led_control_registers[DRIVER_COUNT][24]             = {{0}, {0}};
-bool    g_led_control_registers_update_required[DRIVER_COUNT] = {false};
-
-bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data) {
-    // If the transaction fails function returns false.
-    g_twi_transfer_buffer[0] = reg;
-    g_twi_transfer_buffer[1] = data;
-
-#if ISSI_PERSISTENCE > 0
-    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
-            return false;
-        }
-    }
-#else
-    if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
-        return false;
-    }
-#endif
-    return true;
-}
-
-bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer) {
-    // Assumes PG1 is already selected.
-    // If any of the transactions fails function returns false.
-    // Transmit PWM registers in 12 transfers of 16 bytes.
-    // g_twi_transfer_buffer[] is 20 bytes
-
-    // Iterate over the pwm_buffer contents at 16 byte intervals.
-    for (int i = 0; i < 192; i += 16) {
-        g_twi_transfer_buffer[0] = i;
-        // Copy the data from i to i+15.
-        // Device will auto-increment register for data after the first byte
-        // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
-        for (int j = 0; j < 16; j++) {
-            g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
-        }
-
-#if ISSI_PERSISTENCE > 0
-        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-            if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
-                return false;
-            }
-        }
-#else
-        if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
-            return false;
-        }
-#endif
-    }
-    return true;
-}
-
-void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync) {
-    // In order to avoid the LEDs being driven with garbage data
-    // in the LED driver's PWM registers, shutdown is enabled last.
-    // Set up the mode and other settings, clear the PWM registers,
-    // then disable software shutdown.
-    // Sync is passed so set it according to the datasheet.
-
-    // Unlock the command register.
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-    // Select PG0
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
-    // Turn off all LEDs.
-    for (int i = 0x00; i <= 0x17; i++) {
-        IS31FL3733_write_register(bus, addr, i, 0x00);
-    }
-    // Unlock the command register.
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-    // Select PG1
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
-    // Set PWM on all LEDs to 0
-    // No need to setup Breath registers to PWM as that is the default.
-    for (int i = 0x00; i <= 0xBF; i++) {
-        IS31FL3733_write_register(bus, addr, i, 0x00);
-    }
-    // Unlock the command register.
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-    // Select PG3
-    IS31FL3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
-    // Set global current to maximum.
-    IS31FL3733_write_register(bus, addr, ISSI_REG_GLOBALCURRENT, 0xFF);
-    // Disable software shutdown.
-    IS31FL3733_write_register(bus, addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01);
-    // Wait 10ms to ensure the device has woken up.
-    wait_ms(10);
-}
-
-void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
-    if (index >= 0 && index < DRIVER_LED_TOTAL) {
-        is31_led led = g_is31_leds[index];
-
-        g_pwm_buffer[led.driver][led.r]          = red;
-        g_pwm_buffer[led.driver][led.g]          = green;
-        g_pwm_buffer[led.driver][led.b]          = blue;
-        g_pwm_buffer_update_required[led.driver] = true;
-    }
-}
-
-void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
-    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
-        IS31FL3733_set_color(i, red, green, blue);
-    }
-}
-
-void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
-    is31_led led = g_is31_leds[index];
-
-    uint8_t control_register_r = led.r / 8;
-    uint8_t control_register_g = led.g / 8;
-    uint8_t control_register_b = led.b / 8;
-    uint8_t bit_r              = led.r % 8;
-    uint8_t bit_g              = led.g % 8;
-    uint8_t bit_b              = led.b % 8;
-
-    if (red) {
-        g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
-    } else {
-        g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
-    }
-    if (green) {
-        g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
-    } else {
-        g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
-    }
-    if (blue) {
-        g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
-    } else {
-        g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
-    }
-
-    g_led_control_registers_update_required[led.driver] = true;
-}
-
-void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
-    if (g_pwm_buffer_update_required[index]) {
-        // Firstly we need to unlock the command register and select PG1.
-        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
-
-        // If any of the transactions fail we risk writing dirty PG0,
-        // refresh page 0 just in case.
-        if (!IS31FL3733_write_pwm_buffer(index, addr, g_pwm_buffer[index])) {
-            g_led_control_registers_update_required[index] = true;
-        }
-    }
-    g_pwm_buffer_update_required[index] = false;
-}
-
-void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index) {
-    if (g_led_control_registers_update_required[index]) {
-        // Firstly we need to unlock the command register and select PG0
-        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
-        IS31FL3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
-        for (int i = 0; i < 24; i++) {
-            IS31FL3733_write_register(index, addr, i, g_led_control_registers[index][i]);
-        }
-    }
-    g_led_control_registers_update_required[index] = false;
-}

keyboards/k_type/is31fl3733.h

@@ -1,251 +0,0 @@
-/* Copyright 2017 Jason Williams
- * Copyright 2018 Jack Humbert
- * Copyright 2018 Yiancar
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include <stdint.h>
-#include <stdbool.h>
-
-typedef struct is31_led {
-    uint8_t driver : 2;
-    uint8_t r;
-    uint8_t g;
-    uint8_t b;
-} __attribute__((packed)) is31_led;
-
-extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
-
-void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync);
-bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data);
-bool IS31FL3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffer);
-
-void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
-void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
-
-void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
-
-// This should not be called from an interrupt
-// (eg. from a timer interrupt).
-// Call this while idle (in between matrix scans).
-// If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); // index is the driver index
-void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index);
-
-#define A_1 0x00
-#define A_2 0x01
-#define A_3 0x02
-#define A_4 0x03
-#define A_5 0x04
-#define A_6 0x05
-#define A_7 0x06
-#define A_8 0x07
-#define A_9 0x08
-#define A_10 0x09
-#define A_11 0x0A
-#define A_12 0x0B
-#define A_13 0x0C
-#define A_14 0x0D
-#define A_15 0x0E
-#define A_16 0x0F
-
-#define B_1 0x10
-#define B_2 0x11
-#define B_3 0x12
-#define B_4 0x13
-#define B_5 0x14
-#define B_6 0x15
-#define B_7 0x16
-#define B_8 0x17
-#define B_9 0x18
-#define B_10 0x19
-#define B_11 0x1A
-#define B_12 0x1B
-#define B_13 0x1C
-#define B_14 0x1D
-#define B_15 0x1E
-#define B_16 0x1F
-
-#define C_1 0x20
-#define C_2 0x21
-#define C_3 0x22
-#define C_4 0x23
-#define C_5 0x24
-#define C_6 0x25
-#define C_7 0x26
-#define C_8 0x27
-#define C_9 0x28
-#define C_10 0x29
-#define C_11 0x2A
-#define C_12 0x2B
-#define C_13 0x2C
-#define C_14 0x2D
-#define C_15 0x2E
-#define C_16 0x2F
-
-#define D_1 0x30
-#define D_2 0x31
-#define D_3 0x32
-#define D_4 0x33
-#define D_5 0x34
-#define D_6 0x35
-#define D_7 0x36
-#define D_8 0x37
-#define D_9 0x38
-#define D_10 0x39
-#define D_11 0x3A
-#define D_12 0x3B
-#define D_13 0x3C
-#define D_14 0x3D
-#define D_15 0x3E
-#define D_16 0x3F
-
-#define E_1 0x40
-#define E_2 0x41
-#define E_3 0x42
-#define E_4 0x43
-#define E_5 0x44
-#define E_6 0x45
-#define E_7 0x46
-#define E_8 0x47
-#define E_9 0x48
-#define E_10 0x49
-#define E_11 0x4A
-#define E_12 0x4B
-#define E_13 0x4C
-#define E_14 0x4D
-#define E_15 0x4E
-#define E_16 0x4F
-
-#define F_1 0x50
-#define F_2 0x51
-#define F_3 0x52
-#define F_4 0x53
-#define F_5 0x54
-#define F_6 0x55
-#define F_7 0x56
-#define F_8 0x57
-#define F_9 0x58
-#define F_10 0x59
-#define F_11 0x5A
-#define F_12 0x5B
-#define F_13 0x5C
-#define F_14 0x5D
-#define F_15 0x5E
-#define F_16 0x5F
-
-#define G_1 0x60
-#define G_2 0x61
-#define G_3 0x62
-#define G_4 0x63
-#define G_5 0x64
-#define G_6 0x65
-#define G_7 0x66
-#define G_8 0x67
-#define G_9 0x68
-#define G_10 0x69
-#define G_11 0x6A
-#define G_12 0x6B
-#define G_13 0x6C
-#define G_14 0x6D
-#define G_15 0x6E
-#define G_16 0x6F
-
-#define H_1 0x70
-#define H_2 0x71
-#define H_3 0x72
-#define H_4 0x73
-#define H_5 0x74
-#define H_6 0x75
-#define H_7 0x76
-#define H_8 0x77
-#define H_9 0x78
-#define H_10 0x79
-#define H_11 0x7A
-#define H_12 0x7B
-#define H_13 0x7C
-#define H_14 0x7D
-#define H_15 0x7E
-#define H_16 0x7F
-
-#define I_1 0x80
-#define I_2 0x81
-#define I_3 0x82
-#define I_4 0x83
-#define I_5 0x84
-#define I_6 0x85
-#define I_7 0x86
-#define I_8 0x87
-#define I_9 0x88
-#define I_10 0x89
-#define I_11 0x8A
-#define I_12 0x8B
-#define I_13 0x8C
-#define I_14 0x8D
-#define I_15 0x8E
-#define I_16 0x8F
-
-#define J_1 0x90
-#define J_2 0x91
-#define J_3 0x92
-#define J_4 0x93
-#define J_5 0x94
-#define J_6 0x95
-#define J_7 0x96
-#define J_8 0x97
-#define J_9 0x98
-#define J_10 0x99
-#define J_11 0x9A
-#define J_12 0x9B
-#define J_13 0x9C
-#define J_14 0x9D
-#define J_15 0x9E
-#define J_16 0x9F
-
-#define K_1 0xA0
-#define K_2 0xA1
-#define K_3 0xA2
-#define K_4 0xA3
-#define K_5 0xA4
-#define K_6 0xA5
-#define K_7 0xA6
-#define K_8 0xA7
-#define K_9 0xA8
-#define K_10 0xA9
-#define K_11 0xAA
-#define K_12 0xAB
-#define K_13 0xAC
-#define K_14 0xAD
-#define K_15 0xAE
-#define K_16 0xAF
-
-#define L_1 0xB0
-#define L_2 0xB1
-#define L_3 0xB2
-#define L_4 0xB3
-#define L_5 0xB4
-#define L_6 0xB5
-#define L_7 0xB6
-#define L_8 0xB7
-#define L_9 0xB8
-#define L_10 0xB9
-#define L_11 0xBA
-#define L_12 0xBB
-#define L_13 0xBC
-#define L_14 0xBD
-#define L_15 0xBE
-#define L_16 0xBF

keyboards/k_type/k_type.c

@@ -17,8 +17,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "k_type.h"
 
-#include "is31fl3733.h"
-
 #ifdef RGB_MATRIX_ENABLE
 const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     { 0, B_1,  A_1,  C_1  },
@@ -47,11 +45,11 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     { 0, E_7,  D_7,  F_7  },
     { 0, E_8,  D_8,  F_8  },
     { 0, E_9,  D_9,  F_9  },
-    { 0, E_10, D_10, F_10 },
+    { 0, E_10, D_1,  F_10 },
-    { 0, E_11, D_11, F_11 },
+    { 0, E_11, D_1,  F_11 },
-    { 0, E_12, D_12, F_12 },
+    { 0, E_12, D_1,  F_12 },
-    { 0, E_13, D_13, F_13 },
+    { 0, E_13, D_1,  F_13 },
-    { 0, E_14, D_14, F_14 },
+    { 0, E_14, D_1,  F_14 },
     { 0, E_15, D_15, F_15 },
     { 0, E_16, D_16, F_16 },
 
@@ -64,11 +62,11 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     { 0, H_7,  G_7,  I_7  },
     { 0, H_8,  G_8,  I_8  },
     { 0, H_9,  G_9,  I_9  },
-    { 0, H_10, G_10,  I_10 },
+    { 0, H_10, G_1,  I_10 },
-    { 0, H_11, G_11,  I_11 },
+    { 0, H_11, G_1,  I_11 },
-    { 0, H_12, G_12,  I_12 },
+    { 0, H_12, G_1,  I_12 },
-    { 0, H_13, G_13,  I_13 },
+    { 0, H_13, G_1,  I_13 },
-    { 0, H_14, G_14,  I_14 },
+    { 0, H_14, G_1,  I_14 },
     { 0, H_15, G_15, I_15 },
     { 0, H_16, G_16, I_16 },
 
@@ -81,123 +79,106 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
     { 0, K_7,  J_7,  L_7  },
     { 0, K_8,  J_8,  L_8  },
     { 0, K_9,  J_9,  L_9  },
-    { 0, K_10, J_10,  L_10 },
+    { 0, K_10, J_1,  L_10 },
-    { 0, K_11, J_11,  L_11 },
+    { 0, K_11, J_1,  L_11 },
-    { 0, K_12, J_12,  L_12 },
+    { 0, K_12, J_1,  L_12 },
-    { 0, K_13, J_13,  L_13 },
+    { 0, K_13, J_1,  L_13 },
-    { 0, K_14, J_14,  L_14 },
+    { 0, K_14, J_1,  L_14 },
     { 0, K_15, J_15, L_15 },
     { 0, K_16, J_16, L_16 },
 
     // Driver 2 is on I2C2 - currently not usable with i2c_master
-    { 1, B_1,  A_1,  C_1  },
+    //{ 1, B_1,  A_1,  C_1  },
-    { 1, B_2,  A_2,  C_2  },
+    //{ 1, B_2,  A_2,  C_2  },
-    { 1, B_3,  A_3,  C_3  },
+    //{ 1, B_3,  A_3,  C_3  },
-    { 1, B_4,  A_4,  C_4  },
+    //{ 1, B_4,  A_4,  C_4  },
-    { 1, B_5,  A_5,  C_5  },
+    //{ 1, B_5,  A_5,  C_5  },
-    { 1, B_6,  A_6,  C_6  },
+    //{ 1, B_6,  A_6,  C_6  },
-    { 1, B_7,  A_7,  C_7  },
+    //{ 1, B_7,  A_7,  C_7  },
-    { 1, B_8,  A_8,  C_8  },
+    //{ 1, B_8,  A_8,  C_8  },
-    { 1, B_9,  A_9,  C_9  },
+    //{ 1, B_9,  A_9,  C_9  },
-    { 1, B_10, A_10, C_10 },
+    //{ 1, B_10, A_10, C_10 },
-    { 1, B_11, A_11, C_11 },
+    //{ 1, B_11, A_11, C_11 },
-    { 1, B_12, A_12, C_12 },
+    //{ 1, B_12, A_12, C_12 },
-    { 1, B_13, A_13, C_13 },
+    //{ 1, B_13, A_13, C_13 },
-    { 1, B_14, A_14, C_14 },
+    //{ 1, B_14, A_14, C_14 },
-    { 1, B_15, A_15, C_15 },
+    //{ 1, B_15, A_15, C_15 },
-    { 1, B_16, A_16, C_16 },
+    //{ 1, B_16, A_16, C_16 },
 
-    { 1, E_1,  D_1,  F_1  },
+    //{ 1, E_1,  D_1,  F_1  },
-    { 1, E_2,  D_2,  F_2  },
+    //{ 1, E_2,  D_2,  F_2  },
-    { 1, E_3,  D_3,  F_3  },
+    //{ 1, E_3,  D_3,  F_3  },
-    { 1, E_4,  D_4,  F_4  },
+    //{ 1, E_4,  D_4,  F_4  },
-    { 1, E_5,  D_5,  F_5  },
+    //{ 1, E_5,  D_5,  F_5  },
-    { 1, E_6,  D_6,  F_6  },
+    //{ 1, E_6,  D_6,  F_6  },
-    { 1, E_7,  D_7,  F_7  },
+    //{ 1, E_7,  D_7,  F_7  },
-    { 1, E_8,  D_8,  F_8  },
+    //{ 1, E_8,  D_8,  F_8  },
-    { 1, E_9,  D_9,  F_9  },
+    //{ 1, E_9,  D_9,  F_9  },
-    { 1, E_10, D_10, F_10 },
+    //{ 1, E_10, D_1,  F_10 },
-    { 1, E_11, D_11, F_11 },
+    //{ 1, E_11, D_1,  F_11 },
-    { 1, E_12, D_12, F_12 },
+    //{ 1, E_12, D_1,  F_12 },
-    { 1, E_13, D_13, F_13 },
+    //{ 1, E_13, D_1,  F_13 },
-    { 1, E_14, D_14, F_14 },
+    //{ 1, E_14, D_1,  F_14 },
-    { 1, E_15, D_15, F_15 },
+    //{ 1, E_15, D_15, F_15 },
-    { 1, E_16, D_16, F_16 },
+    //{ 1, E_16, D_16, F_16 },
 
-    { 1, H_1,  G_1,  I_1  },
+    //{ 1, H_1,  G_1,  I_1  },
-    { 1, H_2,  G_2,  I_2  },
+    //{ 1, H_2,  G_2,  I_2  },
-    { 1, H_3,  G_3,  I_3  },
+    //{ 1, H_3,  G_3,  I_3  },
-    { 1, H_4,  G_4,  I_4  },
+    //{ 1, H_4,  G_4,  I_4  },
-    { 1, H_5,  G_5,  I_5  },
+    //{ 1, H_5,  G_5,  I_5  },
-    { 1, H_6,  G_6,  I_6  },
+    //{ 1, H_6,  G_6,  I_6  },
-    { 1, H_7,  G_7,  I_7  },
+    //{ 1, H_7,  G_7,  I_7  },
-    { 1, H_8,  G_8,  I_8  },
+    //{ 1, H_8,  G_8,  I_8  },
-    { 1, H_9,  G_9,  I_9  },
+    //{ 1, H_9,  G_9,  I_9  },
-    { 1, H_10, G_10, I_10 },
+    //{ 1, H_10, G_1,  I_10 },
-    { 1, H_11, G_11, I_11 },
+    //{ 1, H_11, G_1,  I_11 },
-    { 1, H_12, G_12, I_12 },
+    //{ 1, H_12, G_1,  I_12 },
-    { 1, H_13, G_13, I_13 },
+    //{ 1, H_13, G_1,  I_13 },
-    { 1, H_14, G_14, I_14 },
+    //{ 1, H_14, G_1,  I_14 },
-    { 1, H_15, G_15, I_15 },
+    //{ 1, H_15, G_15, I_15 },
-    { 1, H_16, G_16, I_16 },
+    //{ 1, H_16, G_16, I_16 },
 
-    { 1, K_1,  J_1,  L_1  },
+    //{ 1, K_1,  J_1,  L_1  },
-    { 1, K_2,  J_2,  L_2  },
+    //{ 1, K_2,  J_2,  L_2  },
-    { 1, K_3,  J_3,  L_3  },
+    //{ 1, K_3,  J_3,  L_3  },
-    { 1, K_4,  J_4,  L_4  },
+    //{ 1, K_4,  J_4,  L_4  },
-    { 1, K_5,  J_5,  L_5  },
+    //{ 1, K_5,  J_5,  L_5  },
-    { 1, K_6,  J_6,  L_6  },
+    //{ 1, K_6,  J_6,  L_6  },
-    { 1, K_7,  J_7,  L_7  }
+    //{ 1, K_7,  J_7,  L_7  }
 };
 
 led_config_t g_led_config = {
     {
         // Key Matrix to LED Index
-        {      0,      1,      2,      3,      4,      5,      6,      7,      8,      9 },
+        {   0,  10,     20,     29,     38,  47,     57, NO_LED, NO_LED, NO_LED },
-        {     10,     11,     12,     13,     14,     15,     16,     17,     18,     19 },
+        {   1,  11,     21, NO_LED,     39,  48,     58, NO_LED, NO_LED, NO_LED },
-        {     20,     21,     22,     23,     24,     25,     26,     27,     28, NO_LED },
+        {   2,  12,     22,     30,     40,  49,     59, NO_LED, NO_LED, NO_LED },
-        {     29, NO_LED,     30,     31,     32,     33,     34,     35,     36,     37 },
+        {   3,  13,     23,     31,     41,  50,     60, NO_LED, NO_LED, NO_LED },
-        {     38,     39,     40,     41,     42,     43,     44,     45,     46, NO_LED },
+        {   4,  14,     24,     32,     42,  51,     61, NO_LED, NO_LED, NO_LED },
-        {     47,     48,     49,     50,     51,     52,     53,     54,     55,     56 },
+        {   5,  15,     25,     33,     43,  52, NO_LED, NO_LED, NO_LED, NO_LED },
-        {     57,     58,     59,     60,     61, NO_LED,     62, NO_LED,     63, NO_LED },
+        {   6,  16,     26,     34,     44,  53,     62, NO_LED, NO_LED, NO_LED },
-        {     64,     65,     66,     67,     68,     69,     70,     71,     72,     73 },
+        {   7,  17,     27,     35,     45,  54, NO_LED, NO_LED, NO_LED, NO_LED },
-        { NO_LED,     74, NO_LED,     75,     76,     77,     78,     79,     80,     81 },
+        {   8,  18,     28,     36,     46,  55,     63, NO_LED, NO_LED, NO_LED },
-        {     82,     83,     84,     85,     86, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }
+        {   9,  19, NO_LED,     37, NO_LED,  56, NO_LED, NO_LED, NO_LED, NO_LED }
     }, {
         // LED Index to Physical Position
-        // Key LED
         { 0,  0    },                   { 26.35,  0    }, { 39.53,  0    }, { 52.71,  0    }, { 65.88,  0    }, { 79.06,  0    }, { 92.24,  0    }, { 105.41,  0    }, { 118.59,  0    }, { 131.77,  0    }, { 144.94,  0    }, { 158.12,  0    }, { 171.29,  0    },           { 197.65,  0    }, { 210.82,  0    }, { 224,  0    },
 
         { 0, 21.33 }, { 13.18, 21.33 }, { 26.35, 21.33 }, { 39.53, 21.33 }, { 52.71, 21.33 }, { 65.88, 21.33 }, { 79.06, 21.33 }, { 92.24, 21.33 }, { 105.41, 21.33 }, { 118.59, 21.33 }, { 131.77, 21.33 }, { 144.94, 21.33 }, { 158.12, 21.33 }, { 171.29, 21.33 },           { 197.65, 21.33 }, { 210.82, 21.33 }, { 224, 21.33 },
         { 0, 32    }, { 13.18, 32    }, { 26.35, 32    }, { 39.53, 32    }, { 52.71, 32    }, { 65.88, 32    }, { 79.06, 32    }, { 92.24, 32    }, { 105.41, 32    }, { 118.59, 32    }, { 131.77, 32    }, { 144.94, 32    }, { 158.12, 32    }, { 171.29, 32    },           { 197.65, 32    }, { 210.82, 32    }, { 224, 32    },
         { 0, 42.67 }, { 13.18, 42.67 }, { 26.35, 42.67 }, { 39.53, 42.67 }, { 52.71, 42.67 }, { 65.88, 42.67 }, { 79.06, 42.67 }, { 92.24, 42.67 }, { 105.41, 42.67 }, { 118.59, 42.67 }, { 131.77, 42.67 }, { 144.94, 42.67 },                    { 171.29, 42.67 },
-        { 0, 53.33 },                   { 26.35, 53.33 }, { 39.53, 53.33 }, { 52.71, 53.33 }, { 65.88, 53.33 }, { 79.06, 53.33 }, { 92.24, 53.33 }, { 105.41, 53.33 }, { 118.59, 53.33 }, { 131.77, 53.33 }, { 144.94, 53.33 },                    { 171.29, 53.33 },                              { 210.82, 53.33 },
+        { 0, 53.33 },                 //{ 26.35, 53.33 }, { 39.53, 53.33 }, { 52.71, 53.33 }, { 65.88, 53.33 }, { 79.06, 53.33 }, { 92.24, 53.33 }, { 105.41, 53.33 }, { 118.59, 53.33 }, { 131.77, 53.33 }, { 144.94, 53.33 },                    { 171.29, 53.33 },                              { 210.82, 53.33 },
-        { 0, 64    }, { 13.18, 64    }, { 26.35, 64    },                                                       { 79.06, 64    },                                                         { 131.77, 64    }, { 144.94, 64    }, { 158.12, 64    }, { 171.29, 64    },           { 197.65, 64    }, { 210.82, 64    }, { 224, 64    },
+      //{ 0, 64    }, { 13.18, 64    }, { 26.35, 64    },                                                       { 79.06, 64    },                                                         { 131.77, 64    }, { 144.94, 64    }, { 158.12, 64    }, { 171.29, 64    },           { 197.65, 64    }, { 210.82, 64    }, { 224, 64    }
-        
-        // Underglow LED
-        { 224, 64 }, { 206.77, 64 }, { 189.54, 64 }, { 172.31, 64 }, { 155.08, 64 }, { 137.85, 64 }, { 120.61, 64 }, { 103.38, 64 }, { 86.15, 64 }, { 68.92, 64 }, { 51.69, 64 }, { 34.46, 64 }, { 17.23, 64 }, { 0, 64 },
-        { 0, 42.67 }, { 0, 21.33 },
-        { 0, 0 }, { 17.23, 0 }, { 34.46, 0 }, { 51.69, 0 }, { 68.92, 0 }, { 86.15, 0 }, { 103.38, 0 }, { 120.61, 0 }, { 137.85, 0 }, { 155.08, 0 }, { 172.31, 0 }, { 189.54, 0 }, { 206.77, 0 }, { 224, 0 },
-        { 224, 21.33 }, { 224, 42.67 }
     }, {
         // LED Index to Flag
-        //Key LED
+        1,    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    4, 4, 4,
-        1,  4, 4, 4, 4,  1, 1, 1, 1,  4, 4, 4, 4,    1, 1, 1,
 
-        1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,    4, 4, 4,
+        4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    4, 4, 4,
-        1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    4, 4, 4,
+        4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    4, 4, 4,
-        1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    1,
+        4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    1,
-        1,    4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    1,       1,
+        1,  //4, 4, 4, 4, 4, 4, 4, 4, 4, 4,    1,       1,
-        1, 1, 1,          4,          1, 1, 1, 1,    1, 1, 1,
+      //1, 1, 1,          4,          1, 1, 1, 1,    1, 1, 1
-
-        // Underglow LED
-        2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,
-
-        2,                                                  2,
-        
-        2,                                                  2,
-
-        2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,  2,
     }
 };
 #endif

keyboards/k_type/keymaps/andrew-fahmy/config.h

@@ -1,52 +0,0 @@
-/* Copyright 2021 Andrew Fahmy
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-
-#ifdef RGB_MATRIX_ENABLE
-// #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-// #    define RGB_MATRIX_KEYPRESSES
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_RAINDROPS
-
-#    define DEBUG_MATRIX_SCAN_RATE
-
-#    define RGB_MATRIX_LED_FLUSH_LIMIT 100
-// #    define RGB_MATRIX_LED_PROCESS_LIMIT 2
-
-// i2c_master defines
-#    define I2C_COUNT 2
-
-#    define I2C1_BANK GPIOB
-#    define I2C1_SCL 0 // A2 on pinout = B0
-#    define I2C1_SDA 1 // A2 on pinout = B1
-#    define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
-#    define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
-
-#    define USE_I2C2
-#    define I2C2_BANK GPIOC
-#    define I2C2_SCL 10 // A2 on pinout = C10
-#    define I2C2_SDA 11 // A2 on pinout = C11
-#    define I2C2_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
-#    define I2C2_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
-
-#    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_ADDR_2 0b1010000
-#    define DRIVER_COUNT 2
-#    define DRIVER_1_LED_TOTAL 64
-#    define DRIVER_2_LED_TOTAL 55
-#    define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
-#endif

keyboards/k_type/keymaps/andrew-fahmy/keymap.c

@@ -1,60 +0,0 @@
-/* Copyright 2021 Andrew Fahmy
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include QMK_KEYBOARD_H
-
-enum layer_names {
-    _MAIN,
-    _L1
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [_MAIN] = LAYOUT_tkl_ansi(
-        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_PSCR, KC_SLCK, KC_PAUS,
-
-        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_INS,  KC_HOME, KC_PGUP,
-        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_END,  KC_PGDN,
-        MO(_L1), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
-        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,                   KC_UP,
-        KC_LCTL, _______, KC_LALT,                            KC_SPC,                             KC_RALT, MO(_L1), KC_APP,  KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-    [_L1] = LAYOUT_tkl_ansi(
-        EEP_RST,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_TOG, RGB_MOD, _______,
-
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPD, RGB_SPI, _______,          RGB_HUI, RGB_SAI, RGB_VAI,
-        _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_HUD, RGB_SAD, RGB_VAD,
-        _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______,          _______,
-        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,                   _______,
-        _______, KC_LGUI, _______,                            _______,                            _______, _______, _______, _______,          _______, _______, _______
-    )
-};
-
-void keyboard_post_init_user(void) {
-    // Customise these values to desired behaviour
-    // debug_enable=true;
-    // debug_matrix=true;
-    // debug_keyboard=true;
-    // debug_mouse=true;
-}
-
-#ifdef RGB_MATRIX_ENABLE
-// Turn off SDB
-void keyboard_pre_init_user() {
-    palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
-    palSetPad(GPIOB, 16);
-}
-
-#endif

keyboards/k_type/keymaps/andrew-fahmy/rules.mk

@@ -1 +0,0 @@
-RGB_MATRIX_ENABLE = yes

keyboards/k_type/keymaps/rgb/config.h

@@ -2,31 +2,22 @@
 
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_MATRIX_KEYPRESSES
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
-
-#    define RGB_MATRIX_LED_FLUSH_LIMIT 100
-
 
 // i2c_master defines
-#    define I2C_COUNT 2
-
-#    define I2C1_BANK GPIOB
 #    define I2C1_SCL 0 // A2 on pinout = B0
 #    define I2C1_SDA 1 // A2 on pinout = B1
 #    define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
 #    define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
-
+//#    define I2C2_SCL 10 // A2 on pinout = C10
-#    define USE_I2C2
+//#    define I2C2_SDA 11 // A2 on pinout = C11
-#    define I2C2_BANK GPIOC
+//#    define I2C2_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
-#    define I2C2_SCL 10 // A2 on pinout = C10
+//#    define I2C2_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
-#    define I2C2_SDA 11 // A2 on pinout = C11
-#    define I2C2_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
-#    define I2C2_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
 
 #    define DRIVER_ADDR_1 0b1010000
-#    define DRIVER_ADDR_2 0b1010000
+#    define DRIVER_ADDR_2 0b1010001
 #    define DRIVER_COUNT 2
 #    define DRIVER_1_LED_TOTAL 64
-#    define DRIVER_2_LED_TOTAL 55
+//#    define DRIVER_2_LED_TOTAL 55
-#    define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
+#    define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
 #endif

keyboards/k_type/keymaps/rgb/keymap.c

@@ -8,12 +8,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_DEL,  KC_END,  KC_PGDN,
         KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
         KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,                   KC_UP,
-        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_APP,  KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RGUI, MO(1),   KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
     ),
     [1] = LAYOUT_tkl_ansi(
         _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_TOG, RGB_MOD, _______,
 
-        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPD, RGB_SPI, _______,          RGB_HUI, RGB_SAI, RGB_VAI,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_HUI, RGB_SAI, RGB_VAI,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RGB_HUD, RGB_SAD, RGB_VAD,
         _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
         _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,                   _______,

keyboards/k_type/keymaps/rgb/readme.md

@@ -2,6 +2,4 @@
 
 This is an experimental keymap adding support for RGB Matrix on the K-Type.
 
-The keyboard should now support full RGB lightings. The lighting animations are running at 10 fps for performance reasons.
+The board has two IS31FL3733 LED controllers, but they are each on different I2C buses, which QMK's `i2c_master` implementation currently does not support. As a result, all the keys after the left shift will not be lit.
-You can configure this by changing the `RGB_MATRIX_LED_FLUSH_LIMIT` inside the `config.h` file to a lower value.
-For example `RGB_MATRIX_LED_FLUSH_LIMIT 16` would mean that the animations run every 16 ms or at 60 fps.

keyboards/k_type/led.c

@@ -1,53 +0,0 @@
-/* Copyright 2021 Andrew Fahmy
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <rgb_matrix.h>
-#include "i2c_master.h"
-#include "is31fl3733.h"
-
-
-
-static void init(void) {
-    i2c_init(&I2CD1, I2C1_SCL_BANK, I2C1_SDA_BANK, I2C1_SCL, I2C1_SDA);
-    IS31FL3733_init(0, DRIVER_ADDR_1, 0);
-#    ifdef USE_I2C2
-    i2c_init(&I2CD2, I2C2_SCL_BANK, I2C2_SDA_BANK, I2C2_SCL, I2C2_SDA);
-    IS31FL3733_init(1, DRIVER_ADDR_2, 0);
-#    endif
-    for (int index = 0; index < DRIVER_LED_TOTAL; index++) {
-        bool enabled = true;
-        // This only caches it for later
-        IS31FL3733_set_led_control_register(index, enabled, enabled, enabled);
-    }
-    IS31FL3733_update_led_control_registers(DRIVER_ADDR_1, 0);
-#    ifdef USE_I2C2
-    IS31FL3733_update_led_control_registers(DRIVER_ADDR_2, 1);
-#    endif
-}
-
-static void flush(void) {
-    IS31FL3733_update_pwm_buffers(DRIVER_ADDR_1, 0);
-#    ifdef USE_I2C2
-    IS31FL3733_update_pwm_buffers(DRIVER_ADDR_2, 1);
-#    endif
-}
-
-const rgb_matrix_driver_t rgb_matrix_driver = {
-    .init = init,
-    .flush = flush,
-    .set_color = IS31FL3733_set_color,
-    .set_color_all = IS31FL3733_set_color_all,
-};

keyboards/k_type/mcuconf.h

@@ -51,7 +51,4 @@
 #define KINETIS_I2C_USE_I2C0                TRUE
 #define KINETIS_I2C_I2C0_PRIORITY           4
 
-#define KINETIS_I2C_USE_I2C1                TRUE
-#define KINETIS_I2C_I2C0_PRIORITY           4
-
 #endif /* _MCUCONF_H_ */

keyboards/k_type/rules.mk

@@ -27,9 +27,7 @@ RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 RGB_MATRIX_ENABLE = no
-RGB_MATRIX_DRIVER = custom
+RGB_MATRIX_DRIVER = IS31FL3733
-
-SRC += i2c_master.c is31fl3733.c led.c
 
 LAYOUTS = tkl_ansi
 

keyboards/lily58/keymaps/default/keymap.c

@@ -8,8 +8,6 @@
   #include "ssd1306.h"
 #endif
 
-extern uint8_t is_master;
-
 enum layer_number {
   _QWERTY = 0,
   _LOWER,
@@ -107,13 +105,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   )
 };
 
-// Setting ADJUST layer RGB back to default
+layer_state_t layer_state_set_user(layer_state_t state) {
-void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
-  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
-    layer_on(layer3);
-  } else {
-    layer_off(layer3);
-  }
 }
 
 //SSD1306 OLED update loop, make sure to enable OLED_DRIVER_ENABLE=yes in rules.mk

keyboards/massdrop/ctrl/keymaps/default/keymap.c

@@ -10,8 +10,6 @@ enum ctrl_keycodes {
     MD_BOOT,               //Restart into bootloader after hold timeout
 };
 
-keymap_config_t keymap_config;
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [0] = LAYOUT(
         KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS, \

keyboards/massdrop/ctrl/keymaps/default_md/keymap.c

@@ -21,8 +21,6 @@ enum ctrl_keycodes {
     MD_BOOT             //Restart into bootloader after hold timeout                //Working
 };
 
-keymap_config_t keymap_config;
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [0] = LAYOUT(
         KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS, \

keyboards/massdrop/ctrl/keymaps/mac/keymap.c

@@ -10,8 +10,6 @@ enum ctrl_keycodes {
     MD_BOOT,               //Restart into bootloader after hold timeout
 };
 
-keymap_config_t keymap_config;
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [0] = LAYOUT(
         KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS, \

keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c

@@ -21,8 +21,6 @@ enum ctrl_keycodes {
     MD_BOOT             //Restart into bootloader after hold timeout                //Working
 };
 
-keymap_config_t keymap_config;
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [0] = LAYOUT(
         KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS, \

keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c

@@ -44,8 +44,6 @@ enum ctrl_keycodes {
     S_RESET            // reset all parameters
 };
 
-keymap_config_t keymap_config;
-
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [0] = LAYOUT(
         KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS, \

lib/python/qmk/cli/c2json.py

@@ -47,7 +47,7 @@ def c2json(cli):
     if cli.args.output:
         cli.args.output.parent.mkdir(parents=True, exist_ok=True)
         if cli.args.output.exists():
-            cli.args.output.replace(cli.args.output.name + '.bak')
+            cli.args.output.replace(cli.args.output.parent / (cli.args.output.name + '.bak'))
         cli.args.output.write_text(json.dumps(keymap_json, cls=InfoJSONEncoder))
 
         if not cli.args.quiet:

lib/python/qmk/cli/generate/__init__.py

@@ -1,5 +1,6 @@
 from . import api
 from . import config_h
+from . import dfu_header
 from . import docs
 from . import info_json
 from . import layouts

lib/python/qmk/cli/generate/config_h.py

@@ -82,7 +82,7 @@ def generate_config_h(cli):
     """
     # Determine our keyboard(s)
     if not cli.config.generate_config_h.keyboard:
-        cli.log.error('Missing paramater: --keyboard')
+        cli.log.error('Missing parameter: --keyboard')
         cli.subcommands['info'].print_help()
         return False
 
@@ -142,7 +142,7 @@ def generate_config_h(cli):
     if cli.args.output:
         cli.args.output.parent.mkdir(parents=True, exist_ok=True)
         if cli.args.output.exists():
-            cli.args.output.replace(cli.args.output.name + '.bak')
+            cli.args.output.replace(cli.args.output.parent / (cli.args.output.name + '.bak'))
         cli.args.output.write_text(config_h)
 
         if not cli.args.quiet:

lib/python/qmk/cli/generate/dfu_header.py

@@ -0,0 +1,59 @@
+"""Used by the make system to generate LUFA Keyboard.h from info.json
+"""
+from dotty_dict import dotty
+from milc import cli
+
+from qmk.decorators import automagic_keyboard
+from qmk.info import info_json
+from qmk.path import is_keyboard, normpath
+
+
+@cli.argument('-o', '--output', arg_only=True, type=normpath, help='File to write to')
+@cli.argument('-q', '--quiet', arg_only=True, action='store_true', help="Quiet mode, only output error messages")
+@cli.argument('-kb', '--keyboard', help='Keyboard to generate LUFA Keyboard.h for.')
+@cli.subcommand('Used by the make system to generate LUFA Keyboard.h from info.json', hidden=True)
+@automagic_keyboard
+def generate_dfu_header(cli):
+    """Generates the Keyboard.h file.
+    """
+    # Determine our keyboard(s)
+    if not cli.config.generate_dfu_header.keyboard:
+        cli.log.error('Missing parameter: --keyboard')
+        cli.subcommands['info'].print_help()
+        return False
+
+    if not is_keyboard(cli.config.generate_dfu_header.keyboard):
+        cli.log.error('Invalid keyboard: "%s"', cli.config.generate_dfu_header.keyboard)
+        return False
+
+    # Build the Keyboard.h file.
+    kb_info_json = dotty(info_json(cli.config.generate_dfu_header.keyboard))
+
+    keyboard_h_lines = ['/* This file was generated by `qmk generate-dfu-header`. Do not edit or copy.' ' */', '', '#pragma once']
+    keyboard_h_lines.append(f'#define MANUFACTURER {kb_info_json["manufacturer"]}')
+    keyboard_h_lines.append(f'#define PRODUCT {cli.config.generate_dfu_header.keyboard} Bootloader')
+
+    # Optional
+    if 'qmk_lufa_bootloader.esc_output' in kb_info_json:
+        keyboard_h_lines.append(f'#define QMK_ESC_OUTPUT {kb_info_json["qmk_lufa_bootloader.esc_output"]}')
+    if 'qmk_lufa_bootloader.esc_input' in kb_info_json:
+        keyboard_h_lines.append(f'#define QMK_ESC_INPUT {kb_info_json["qmk_lufa_bootloader.esc_input"]}')
+    if 'qmk_lufa_bootloader.led' in kb_info_json:
+        keyboard_h_lines.append(f'#define QMK_LED {kb_info_json["qmk_lufa_bootloader.led"]}')
+    if 'qmk_lufa_bootloader.speaker' in kb_info_json:
+        keyboard_h_lines.append(f'#define QMK_SPEAKER {kb_info_json["qmk_lufa_bootloader.speaker"]}')
+
+    # Show the results
+    keyboard_h = '\n'.join(keyboard_h_lines)
+
+    if cli.args.output:
+        cli.args.output.parent.mkdir(parents=True, exist_ok=True)
+        if cli.args.output.exists():
+            cli.args.output.replace(cli.args.output.parent / (cli.args.output.name + '.bak'))
+        cli.args.output.write_text(keyboard_h)
+
+        if not cli.args.quiet:
+            cli.log.info('Wrote Keyboard.h to %s.', cli.args.output)
+
+    else:
+        print(keyboard_h)

lib/python/qmk/cli/generate/layouts.py

@@ -25,7 +25,7 @@ def generate_layouts(cli):
     """
     # Determine our keyboard(s)
     if not cli.config.generate_layouts.keyboard:
-        cli.log.error('Missing paramater: --keyboard')
+        cli.log.error('Missing parameter: --keyboard')
         cli.subcommands['info'].print_help()
         return False
 
@@ -92,7 +92,7 @@ def generate_layouts(cli):
     if cli.args.output:
         cli.args.output.parent.mkdir(parents=True, exist_ok=True)
         if cli.args.output.exists():
-            cli.args.output.replace(cli.args.output.name + '.bak')
+            cli.args.output.replace(cli.args.output.parent / (cli.args.output.name + '.bak'))
         cli.args.output.write_text(layouts_h)
 
         if not cli.args.quiet:

lib/python/qmk/cli/generate/rgb_breathe_table.py

@@ -70,7 +70,7 @@ static const int table_scale = 256 / sizeof(rgblight_effect_breathe_table);
     if cli.args.output:
         cli.args.output.parent.mkdir(parents=True, exist_ok=True)
         if cli.args.output.exists():
-            cli.args.output.replace(cli.args.output.name + '.bak')
+            cli.args.output.replace(cli.args.output.parent / (cli.args.output.name + '.bak'))
         cli.args.output.write_text(table_template)
 
         if not cli.args.quiet:

lib/python/qmk/cli/generate/rules_mk.py

@@ -44,7 +44,7 @@ def generate_rules_mk(cli):
     """Generates a rules.mk file from info.json.
     """
     if not cli.config.generate_rules_mk.keyboard:
-        cli.log.error('Missing paramater: --keyboard')
+        cli.log.error('Missing parameter: --keyboard')
         cli.subcommands['info'].print_help()
         return False
 
@@ -79,7 +79,7 @@ def generate_rules_mk(cli):
     if cli.args.output:
         cli.args.output.parent.mkdir(parents=True, exist_ok=True)
         if cli.args.output.exists():
-            cli.args.output.replace(cli.args.output.name + '.bak')
+            cli.args.output.replace(cli.args.output.parent / (cli.args.output.name + '.bak'))
         cli.args.output.write_text(rules_mk)
 
         if cli.args.quiet:

lib/python/qmk/cli/json2c.py

@@ -37,7 +37,7 @@ def json2c(cli):
     if cli.args.output:
         cli.args.output.parent.mkdir(parents=True, exist_ok=True)
         if cli.args.output.exists():
-            cli.args.output.replace(cli.args.output.name + '.bak')
+            cli.args.output.replace(cli.args.output.parent / (cli.args.output.name + '.bak'))
         cli.args.output.write_text(keymap_c)
 
         if not cli.args.quiet:

quantum/quantum.c

@@ -14,7 +14,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#include <ctype.h>
 #include "quantum.h"
 
 #ifdef BLUETOOTH_ENABLE
@@ -325,237 +324,6 @@ bool process_record_quantum(keyrecord_t *record) {
     return process_action_kb(record);
 }
 
-// clang-format off
-
-/* Bit-Packed look-up table to convert an ASCII character to whether
- * [Shift] needs to be sent with the keycode.
- */
-__attribute__((weak)) const uint8_t ascii_to_shift_lut[16] PROGMEM = {
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-
-    KCLUT_ENTRY(0, 1, 1, 1, 1, 1, 1, 0),
-    KCLUT_ENTRY(1, 1, 1, 1, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 1, 0, 1, 0, 1, 1),
-    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
-    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
-    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
-    KCLUT_ENTRY(1, 1, 1, 0, 0, 0, 1, 1),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 1, 1, 1, 1, 0),
-};
-
-/* Bit-Packed look-up table to convert an ASCII character to whether
- * [AltGr] needs to be sent with the keycode.
- */
-__attribute__((weak)) const uint8_t ascii_to_altgr_lut[16] PROGMEM = {
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-};
-
-/* Bit-Packed look-up table to convert an ASCII character to whether
- * [Space] needs to be sent after the keycode
- */
-__attribute__((weak)) const uint8_t ascii_to_dead_lut[16] PROGMEM = {
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
-};
-
-/* Look-up table to convert an ASCII character to a keycode.
- */
-__attribute__((weak)) const uint8_t ascii_to_keycode_lut[128] PROGMEM = {
-    // NUL   SOH      STX      ETX      EOT      ENQ      ACK      BEL
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-    // BS    TAB      LF       VT       FF       CR       SO       SI
-    KC_BSPC, KC_TAB,  KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-    // DLE   DC1      DC2      DC3      DC4      NAK      SYN      ETB
-    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-    // CAN   EM       SUB      ESC      FS       GS       RS       US
-    XXXXXXX, XXXXXXX, XXXXXXX, KC_ESC,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
-
-    //       !        "        #        $        %        &        '
-    KC_SPC,  KC_1,    KC_QUOT, KC_3,    KC_4,    KC_5,    KC_7,    KC_QUOT,
-    // (     )        *        +        ,        -        .        /
-    KC_9,    KC_0,    KC_8,    KC_EQL,  KC_COMM, KC_MINS, KC_DOT,  KC_SLSH,
-    // 0     1        2        3        4        5        6        7
-    KC_0,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,
-    // 8     9        :        ;        <        =        >        ?
-    KC_8,    KC_9,    KC_SCLN, KC_SCLN, KC_COMM, KC_EQL,  KC_DOT,  KC_SLSH,
-    // @     A        B        C        D        E        F        G
-    KC_2,    KC_A,    KC_B,    KC_C,    KC_D,    KC_E,    KC_F,    KC_G,
-    // H     I        J        K        L        M        N        O
-    KC_H,    KC_I,    KC_J,    KC_K,    KC_L,    KC_M,    KC_N,    KC_O,
-    // P     Q        R        S        T        U        V        W
-    KC_P,    KC_Q,    KC_R,    KC_S,    KC_T,    KC_U,    KC_V,    KC_W,
-    // X     Y        Z        [        \        ]        ^        _
-    KC_X,    KC_Y,    KC_Z,    KC_LBRC, KC_BSLS, KC_RBRC, KC_6,    KC_MINS,
-    // `     a        b        c        d        e        f        g
-    KC_GRV,  KC_A,    KC_B,    KC_C,    KC_D,    KC_E,    KC_F,    KC_G,
-    // h     i        j        k        l        m        n        o
-    KC_H,    KC_I,    KC_J,    KC_K,    KC_L,    KC_M,    KC_N,    KC_O,
-    // p     q        r        s        t        u        v        w
-    KC_P,    KC_Q,    KC_R,    KC_S,    KC_T,    KC_U,    KC_V,    KC_W,
-    // x     y        z        {        |        }        ~        DEL
-    KC_X,    KC_Y,    KC_Z,    KC_LBRC, KC_BSLS, KC_RBRC, KC_GRV,  KC_DEL
-};
-
-// clang-format on
-
-// Note: we bit-pack in "reverse" order to optimize loading
-#define PGM_LOADBIT(mem, pos) ((pgm_read_byte(&((mem)[(pos) / 8])) >> ((pos) % 8)) & 0x01)
-
-void send_string(const char *str) { send_string_with_delay(str, 0); }
-
-void send_string_P(const char *str) { send_string_with_delay_P(str, 0); }
-
-void send_string_with_delay(const char *str, uint8_t interval) {
-    while (1) {
-        char ascii_code = *str;
-        if (!ascii_code) break;
-        if (ascii_code == SS_QMK_PREFIX) {
-            ascii_code = *(++str);
-            if (ascii_code == SS_TAP_CODE) {
-                // tap
-                uint8_t keycode = *(++str);
-                tap_code(keycode);
-            } else if (ascii_code == SS_DOWN_CODE) {
-                // down
-                uint8_t keycode = *(++str);
-                register_code(keycode);
-            } else if (ascii_code == SS_UP_CODE) {
-                // up
-                uint8_t keycode = *(++str);
-                unregister_code(keycode);
-            } else if (ascii_code == SS_DELAY_CODE) {
-                // delay
-                int     ms      = 0;
-                uint8_t keycode = *(++str);
-                while (isdigit(keycode)) {
-                    ms *= 10;
-                    ms += keycode - '0';
-                    keycode = *(++str);
-                }
-                while (ms--) wait_ms(1);
-            }
-        } else {
-            send_char(ascii_code);
-        }
-        ++str;
-        // interval
-        {
-            uint8_t ms = interval;
-            while (ms--) wait_ms(1);
-        }
-    }
-}
-
-void send_string_with_delay_P(const char *str, uint8_t interval) {
-    while (1) {
-        char ascii_code = pgm_read_byte(str);
-        if (!ascii_code) break;
-        if (ascii_code == SS_QMK_PREFIX) {
-            ascii_code = pgm_read_byte(++str);
-            if (ascii_code == SS_TAP_CODE) {
-                // tap
-                uint8_t keycode = pgm_read_byte(++str);
-                tap_code(keycode);
-            } else if (ascii_code == SS_DOWN_CODE) {
-                // down
-                uint8_t keycode = pgm_read_byte(++str);
-                register_code(keycode);
-            } else if (ascii_code == SS_UP_CODE) {
-                // up
-                uint8_t keycode = pgm_read_byte(++str);
-                unregister_code(keycode);
-            } else if (ascii_code == SS_DELAY_CODE) {
-                // delay
-                int     ms      = 0;
-                uint8_t keycode = pgm_read_byte(++str);
-                while (isdigit(keycode)) {
-                    ms *= 10;
-                    ms += keycode - '0';
-                    keycode = pgm_read_byte(++str);
-                }
-                while (ms--) wait_ms(1);
-            }
-        } else {
-            send_char(ascii_code);
-        }
-        ++str;
-        // interval
-        {
-            uint8_t ms = interval;
-            while (ms--) wait_ms(1);
-        }
-    }
-}
-
-void send_char(char ascii_code) {
-#if defined(AUDIO_ENABLE) && defined(SENDSTRING_BELL)
-    if (ascii_code == '\a') {  // BEL
-        PLAY_SONG(bell_song);
-        return;
-    }
-#endif
-
-    uint8_t keycode    = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]);
-    bool    is_shifted = PGM_LOADBIT(ascii_to_shift_lut, (uint8_t)ascii_code);
-    bool    is_altgred = PGM_LOADBIT(ascii_to_altgr_lut, (uint8_t)ascii_code);
-    bool    is_dead    = PGM_LOADBIT(ascii_to_dead_lut, (uint8_t)ascii_code);
-
-    if (is_shifted) {
-        register_code(KC_LSFT);
-    }
-    if (is_altgred) {
-        register_code(KC_RALT);
-    }
-    tap_code(keycode);
-    if (is_altgred) {
-        unregister_code(KC_RALT);
-    }
-    if (is_shifted) {
-        unregister_code(KC_LSFT);
-    }
-    if (is_dead) {
-        tap_code(KC_SPACE);
-    }
-}
-
 void set_single_persistent_default_layer(uint8_t default_layer) {
 #if defined(AUDIO_ENABLE) && defined(DEFAULT_LAYER_SONGS)
     PLAY_SONG(default_layer_songs[default_layer]);

quantum/quantum.h

@@ -61,7 +61,7 @@
 #include "action_util.h"
 #include "action_tapping.h"
 #include "print.h"
-#include "send_string_keycodes.h"
+#include "send_string.h"
 #include "suspend.h"
 #include <stddef.h>
 #include <stdlib.h>
@@ -231,31 +231,6 @@ extern layer_state_t layer_state;
 #    define waitInputPinDelay() wait_cpuclock(GPIO_INPUT_PIN_DELAY)
 
 #endif
-#define SEND_STRING(string) send_string_P(PSTR(string))
-#define SEND_STRING_DELAY(string, interval) send_string_with_delay_P(PSTR(string), interval)
-
-// Look-Up Tables (LUTs) to convert ASCII character to keycode sequence.
-extern const uint8_t ascii_to_keycode_lut[128];
-extern const uint8_t ascii_to_shift_lut[16];
-extern const uint8_t ascii_to_altgr_lut[16];
-extern const uint8_t ascii_to_dead_lut[16];
-// clang-format off
-#define KCLUT_ENTRY(a, b, c, d, e, f, g, h) \
-    ( ((a) ? 1 : 0) << 0 \
-    | ((b) ? 1 : 0) << 1 \
-    | ((c) ? 1 : 0) << 2 \
-    | ((d) ? 1 : 0) << 3 \
-    | ((e) ? 1 : 0) << 4 \
-    | ((f) ? 1 : 0) << 5 \
-    | ((g) ? 1 : 0) << 6 \
-    | ((h) ? 1 : 0) << 7 )
-// clang-format on
-
-void send_string(const char *str);
-void send_string_with_delay(const char *str, uint8_t interval);
-void send_string_P(const char *str);
-void send_string_with_delay_P(const char *str, uint8_t interval);
-void send_char(char ascii_code);
 
 // For tri-layer
 void          update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3);

quantum/send_string.c

@@ -0,0 +1,252 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <ctype.h>
+
+#include "quantum.h"
+
+#include "send_string.h"
+
+// clang-format off
+
+/* Bit-Packed look-up table to convert an ASCII character to whether
+ * [Shift] needs to be sent with the keycode.
+ */
+__attribute__((weak)) const uint8_t ascii_to_shift_lut[16] PROGMEM = {
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+
+    KCLUT_ENTRY(0, 1, 1, 1, 1, 1, 1, 0),
+    KCLUT_ENTRY(1, 1, 1, 1, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 1, 0, 1, 0, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 0, 0, 0, 1, 1),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 1, 1, 1, 1, 0)
+};
+
+/* Bit-Packed look-up table to convert an ASCII character to whether
+ * [AltGr] needs to be sent with the keycode.
+ */
+__attribute__((weak)) const uint8_t ascii_to_altgr_lut[16] PROGMEM = {
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0)
+};
+
+/* Bit-Packed look-up table to convert an ASCII character to whether
+ * [Space] needs to be sent after the keycode
+ */
+__attribute__((weak)) const uint8_t ascii_to_dead_lut[16] PROGMEM = {
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0)
+};
+
+/* Look-up table to convert an ASCII character to a keycode.
+ */
+__attribute__((weak)) const uint8_t ascii_to_keycode_lut[128] PROGMEM = {
+    // NUL   SOH      STX      ETX      EOT      ENQ      ACK      BEL
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    // BS    TAB      LF       VT       FF       CR       SO       SI
+    KC_BSPC, KC_TAB,  KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    // DLE   DC1      DC2      DC3      DC4      NAK      SYN      ETB
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    // CAN   EM       SUB      ESC      FS       GS       RS       US
+    XXXXXXX, XXXXXXX, XXXXXXX, KC_ESC,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+
+    //       !        "        #        $        %        &        '
+    KC_SPC,  KC_1,    KC_QUOT, KC_3,    KC_4,    KC_5,    KC_7,    KC_QUOT,
+    // (     )        *        +        ,        -        .        /
+    KC_9,    KC_0,    KC_8,    KC_EQL,  KC_COMM, KC_MINS, KC_DOT,  KC_SLSH,
+    // 0     1        2        3        4        5        6        7
+    KC_0,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,
+    // 8     9        :        ;        <        =        >        ?
+    KC_8,    KC_9,    KC_SCLN, KC_SCLN, KC_COMM, KC_EQL,  KC_DOT,  KC_SLSH,
+    // @     A        B        C        D        E        F        G
+    KC_2,    KC_A,    KC_B,    KC_C,    KC_D,    KC_E,    KC_F,    KC_G,
+    // H     I        J        K        L        M        N        O
+    KC_H,    KC_I,    KC_J,    KC_K,    KC_L,    KC_M,    KC_N,    KC_O,
+    // P     Q        R        S        T        U        V        W
+    KC_P,    KC_Q,    KC_R,    KC_S,    KC_T,    KC_U,    KC_V,    KC_W,
+    // X     Y        Z        [        \        ]        ^        _
+    KC_X,    KC_Y,    KC_Z,    KC_LBRC, KC_BSLS, KC_RBRC, KC_6,    KC_MINS,
+    // `     a        b        c        d        e        f        g
+    KC_GRV,  KC_A,    KC_B,    KC_C,    KC_D,    KC_E,    KC_F,    KC_G,
+    // h     i        j        k        l        m        n        o
+    KC_H,    KC_I,    KC_J,    KC_K,    KC_L,    KC_M,    KC_N,    KC_O,
+    // p     q        r        s        t        u        v        w
+    KC_P,    KC_Q,    KC_R,    KC_S,    KC_T,    KC_U,    KC_V,    KC_W,
+    // x     y        z        {        |        }        ~        DEL
+    KC_X,    KC_Y,    KC_Z,    KC_LBRC, KC_BSLS, KC_RBRC, KC_GRV,  KC_DEL
+};
+
+// clang-format on
+
+// Note: we bit-pack in "reverse" order to optimize loading
+#define PGM_LOADBIT(mem, pos) ((pgm_read_byte(&((mem)[(pos) / 8])) >> ((pos) % 8)) & 0x01)
+
+void send_string(const char *str) { send_string_with_delay(str, 0); }
+
+void send_string_P(const char *str) { send_string_with_delay_P(str, 0); }
+
+void send_string_with_delay(const char *str, uint8_t interval) {
+    while (1) {
+        char ascii_code = *str;
+        if (!ascii_code) break;
+        if (ascii_code == SS_QMK_PREFIX) {
+            ascii_code = *(++str);
+            if (ascii_code == SS_TAP_CODE) {
+                // tap
+                uint8_t keycode = *(++str);
+                tap_code(keycode);
+            } else if (ascii_code == SS_DOWN_CODE) {
+                // down
+                uint8_t keycode = *(++str);
+                register_code(keycode);
+            } else if (ascii_code == SS_UP_CODE) {
+                // up
+                uint8_t keycode = *(++str);
+                unregister_code(keycode);
+            } else if (ascii_code == SS_DELAY_CODE) {
+                // delay
+                int     ms      = 0;
+                uint8_t keycode = *(++str);
+                while (isdigit(keycode)) {
+                    ms *= 10;
+                    ms += keycode - '0';
+                    keycode = *(++str);
+                }
+                while (ms--) wait_ms(1);
+            }
+        } else {
+            send_char(ascii_code);
+        }
+        ++str;
+        // interval
+        {
+            uint8_t ms = interval;
+            while (ms--) wait_ms(1);
+        }
+    }
+}
+
+void send_string_with_delay_P(const char *str, uint8_t interval) {
+    while (1) {
+        char ascii_code = pgm_read_byte(str);
+        if (!ascii_code) break;
+        if (ascii_code == SS_QMK_PREFIX) {
+            ascii_code = pgm_read_byte(++str);
+            if (ascii_code == SS_TAP_CODE) {
+                // tap
+                uint8_t keycode = pgm_read_byte(++str);
+                tap_code(keycode);
+            } else if (ascii_code == SS_DOWN_CODE) {
+                // down
+                uint8_t keycode = pgm_read_byte(++str);
+                register_code(keycode);
+            } else if (ascii_code == SS_UP_CODE) {
+                // up
+                uint8_t keycode = pgm_read_byte(++str);
+                unregister_code(keycode);
+            } else if (ascii_code == SS_DELAY_CODE) {
+                // delay
+                int     ms      = 0;
+                uint8_t keycode = pgm_read_byte(++str);
+                while (isdigit(keycode)) {
+                    ms *= 10;
+                    ms += keycode - '0';
+                    keycode = pgm_read_byte(++str);
+                }
+                while (ms--) wait_ms(1);
+            }
+        } else {
+            send_char(ascii_code);
+        }
+        ++str;
+        // interval
+        {
+            uint8_t ms = interval;
+            while (ms--) wait_ms(1);
+        }
+    }
+}
+
+void send_char(char ascii_code) {
+#if defined(AUDIO_ENABLE) && defined(SENDSTRING_BELL)
+    if (ascii_code == '\a') {  // BEL
+        PLAY_SONG(bell_song);
+        return;
+    }
+#endif
+
+    uint8_t keycode    = pgm_read_byte(&ascii_to_keycode_lut[(uint8_t)ascii_code]);
+    bool    is_shifted = PGM_LOADBIT(ascii_to_shift_lut, (uint8_t)ascii_code);
+    bool    is_altgred = PGM_LOADBIT(ascii_to_altgr_lut, (uint8_t)ascii_code);
+    bool    is_dead    = PGM_LOADBIT(ascii_to_dead_lut, (uint8_t)ascii_code);
+
+    if (is_shifted) {
+        register_code(KC_LSFT);
+    }
+    if (is_altgred) {
+        register_code(KC_RALT);
+    }
+    tap_code(keycode);
+    if (is_altgred) {
+        unregister_code(KC_RALT);
+    }
+    if (is_shifted) {
+        unregister_code(KC_LSFT);
+    }
+    if (is_dead) {
+        tap_code(KC_SPACE);
+    }
+}

quantum/send_string.h

@@ -0,0 +1,47 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+
+#include "progmem.h"
+#include "send_string_keycodes.h"
+
+#define SEND_STRING(string) send_string_P(PSTR(string))
+#define SEND_STRING_DELAY(string, interval) send_string_with_delay_P(PSTR(string), interval)
+
+// Look-Up Tables (LUTs) to convert ASCII character to keycode sequence.
+extern const uint8_t ascii_to_keycode_lut[128];
+extern const uint8_t ascii_to_shift_lut[16];
+extern const uint8_t ascii_to_altgr_lut[16];
+extern const uint8_t ascii_to_dead_lut[16];
+
+// clang-format off
+#define KCLUT_ENTRY(a, b, c, d, e, f, g, h) \
+    ( ((a) ? 1 : 0) << 0 \
+    | ((b) ? 1 : 0) << 1 \
+    | ((c) ? 1 : 0) << 2 \
+    | ((d) ? 1 : 0) << 3 \
+    | ((e) ? 1 : 0) << 4 \
+    | ((f) ? 1 : 0) << 5 \
+    | ((g) ? 1 : 0) << 6 \
+    | ((h) ? 1 : 0) << 7 )
+// clang-format on
+
+void send_string(const char *str);
+void send_string_with_delay(const char *str, uint8_t interval);
+void send_string_P(const char *str);
+void send_string_with_delay_P(const char *str, uint8_t interval);
+void send_char(char ascii_code);

tmk_core/avr.mk

@@ -284,7 +284,7 @@ extcoff: $(BUILD_DIR)/$(TARGET).elf
 
 bootloader:
 	make -C lib/lufa/Bootloaders/DFU/ clean
-	$(TMK_DIR)/make_dfu_header.sh $(ALL_CONFIGS)
+	bin/qmk generate-dfu-header --quiet --keyboard $(KEYBOARD) --output lib/lufa/Bootloaders/DFU/Keyboard.h
 	$(eval MAX_SIZE=$(shell n=`$(CC) -E -mmcu=$(MCU) $(CFLAGS) $(OPT_DEFS) tmk_core/common/avr/bootloader_size.c 2> /dev/null | sed -ne 's/\r//;/^#/n;/^AVR_SIZE:/,$${s/^AVR_SIZE: //;p;}'` && echo $$(($$n)) || echo 0))
 	$(eval PROGRAM_SIZE_KB=$(shell n=`expr $(MAX_SIZE) / 1024` && echo $$(($$n)) || echo 0))
 	$(eval BOOT_SECTION_SIZE_KB=$(shell n=`expr  $(BOOTLOADER_SIZE) / 1024` && echo $$(($$n)) || echo 0))

tmk_core/common/suspend.h

@@ -14,5 +14,5 @@ void suspend_power_down_user(void);
 void suspend_power_down_kb(void);
 
 #ifndef USB_SUSPEND_WAKEUP_DELAY
-#    define USB_SUSPEND_WAKEUP_DELAY 200
+#    define USB_SUSPEND_WAKEUP_DELAY 0
 #endif

tmk_core/make_dfu_header.sh

@@ -1,14 +0,0 @@
-#!/bin/sh
-ALL_CONFIGS=$*
-GREP="grep"
-
-cat <<- EOF > lib/lufa/Bootloaders/DFU/Keyboard.h
-#pragma once
-
-$($GREP "MANUFACTURER[ \t]" $ALL_CONFIGS -h | tail -1)
-$($GREP "PRODUCT[ \t]" $ALL_CONFIGS -h | tail -1 | tr -d '\r') Bootloader
-$($GREP "QMK_ESC_OUTPUT[ \t]" $ALL_CONFIGS -h | tail -1)
-$($GREP "QMK_ESC_INPUT[ \t]" $ALL_CONFIGS -h | tail -1)
-$($GREP "QMK_LED[ \t]" $ALL_CONFIGS -h | tail -1)
-$($GREP "QMK_SPEAKER[ \t]" $ALL_CONFIGS -h | tail -1)
-EOF