Add support for using podman to util/docker_build.sh (#10819)

* add podman support to docker_build.sh script

* break out runtime into the RUNTIME variable
* allows RUNTIME to be set by the user
* decides on docker or podman if docker isn't avaible
* rewrote check for docker-machine to account only for docker runtime
* put --user arg into a variable only to be used with docker
  this is not needed with podman as podman maps the containers root id
  to the users id.

* add podman to getting_started_docker documentation

data/schemas/keyboard.jsonschema

@@ -88,7 +88,7 @@
                 "oneOf": [
                     {
                         "type": "string",
-                        "enum": ["LAYOUT"]
+                        "enum": ["LAYOUT", "LAYOUT_planck_1x2uC"]
                     },
                     {
                         "type": "string",

docs/feature_unicode.md

@@ -126,6 +126,8 @@ The following input modes are available:
   Enabled by default and works almost anywhere on IBus-enabled distros. Without IBus, this mode works under GTK apps, but rarely anywhere else.
   By default, this mode uses Ctrl+Shift+U (`LCTL(LSFT(KC_U))`) to start Unicode input, but this can be changed by defining [`UNICODE_KEY_LNX`](#input-key-configuration) with a different keycode. This might be required for IBus versions ≥1.5.15, where Ctrl+Shift+U behavior is consolidated into Ctrl+Shift+E.
 
+  Users who wish support in non-GTK apps without IBus may need to resort to a more indirect method, such as creating a custom keyboard layout ([more on this method](#custom-linux-layout)).
+  
 * **`UC_WIN`**: _(not recommended)_ Windows built-in hex numpad Unicode input. Supports code points up to `0xFFFF`.
 
   To enable, create a registry key under `HKEY_CURRENT_USER\Control Panel\Input Method` of type `REG_SZ` called `EnableHexNumpad` and set its value to `1`. This can be done from the Command Prompt by running `reg add "HKCU\Control Panel\Input Method" -v EnableHexNumpad -t REG_SZ -d 1` with administrator privileges. Reboot afterwards.
@@ -270,3 +272,22 @@ AutoHotkey inserts the Text right of `Send, ` when this combination is pressed.
 
 If you enable the US International layout on the system, it will use punctuation to accent the characters. For instance, typing "\`a" will result in à.
 You can find details on how to enable this [here](https://support.microsoft.com/en-us/help/17424/windows-change-keyboard-layout).
+
+## Software keyboard layout on Linux :id=custom-linux-layout
+
+This method does not require Unicode support on the keyboard itself but instead uses a custom keyboard layout for Xorg. This is how special characters are inserted by regular keyboards. This does not require IBus and works in practically all software. Help on creating a custom layout can be found [here](https://www.linux.com/news/creating-custom-keyboard-layouts-x11-using-xkb/), [here](http://karols.github.io/blog/2013/11/18/creating-custom-keyboard-layouts-for-linux/) and [here](https://wiki.archlinux.org/index.php/X_keyboard_extension). An example of how you could edit the `us` layout to gain 🤣 on `RALT(KC_R)`:
+
+Edit the keyboard layout file `/usr/share/X11/xkb/symbols/us`.
+
+Inside `xkb_symbols "basic" {`, add `include "level3(ralt_switch)"`.
+
+Find the line defining the R key and add an entry to the list, making it look like this:
+```
+key <AD04> {	[	  r,	R, U1F923		]	};
+```
+
+Save the file and run the command `setxkbmap us` to reload the layout.
+
+You can define one custom character for key defined in the layout, and another if you populate the fourth layer. Additional layers up to 8th are also possible.
+
+This method is specific to the computer on which you set the custom layout. The custom keys will be available only when Xorg is running. To avoid accidents, you should always reload the layout using `setxkbmap`, otherwise an invalid layout could prevent you from logging into your system, locking you out.

docs/getting_started_docker.md

@@ -4,8 +4,9 @@ This project includes a Docker workflow that will allow you to build a new firmw
 
 ## Requirements
 
-The main prerequisite is a working `docker` install.
+The main prerequisite is a working `docker` or `podman` install.
 * [Docker CE](https://docs.docker.com/install/#supported-platforms)
+* [Podman](https://podman.io/getting-started/installation)
 
 ## Usage
 
@@ -38,6 +39,13 @@ util/docker_build.sh
 # Reads parameters as input (leave blank for all keyboards/keymaps)
 ```
 
+You can manually set which container runtime you want to use by setting the `RUNTIME` environment variable to it's name or path.
+By default docker or podman are automatically detected and docker is preferred over podman.
+
+```bash
+RUNTIME="podman" util/docker_build.sh keyboard:keymap:target
+```
+
 ## FAQ
 
 ### Why can't I flash on Windows/macOS

keyboards/acheron/shark/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "SharkPCB",
-  "keyboard_folder": "acheron/shark",
   "url": "https://gondolindrim.github.io/AcheronDocs/shark/intro.html",
   "maintainer": "Gondolindrim",
   "width": 12,

keyboards/at101_bh/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "AT101 BH PCB",
-  "keyboard_folder": "at101_bh",
   "url": "https://deskthority.net/group-buys-f50/programmable-vintage-board-pcbs-omnikey-at101-and-z-150-t19325.html",
   "maintainer": "qmk, blindassassin111",
   "width": 22.5,

keyboards/chimera_ortho/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Chimera Ortho",
-  "keyboard_folder": "chimera_ortho",
   "maintainer": "qmk",
   "width": 15.5,
   "height": 4.25,

keyboards/chimera_ortho_plus/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Chimera Ortho Plus",
-  "keyboard_folder": "chimera_ortho_plus", 
   "maintainer": "qmk",
   "width": 13.5,
   "height": 6,

keyboards/christmas_tree/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Christmas Tree",
-  "keyboard_folder": "christmas_tree",
   "url": "https://www.reddit.com/r/MechanicalKeyboards/comments/7cqxpf/gb_christmas_tree_pcb_gb_now_live/",
   "maintainer": "That-Canadian",
   "width": 3,

keyboards/converter/hp_46010a/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "HP_46010A",
-  "keyboard_folder": "converter/HP_46010A",
   "url": "https://deskthority.net/wiki/HP_46010A",
   "maintainer": "listofoptions",
   "width": 22,

keyboards/converter/ibm_5291/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "IBM 5291",
-  "keyboard_folder": "converter/ibm_5291",
   "url": "https://deskthority.net/wiki/IBM_Model_F#IBM_5291_Keyboard",
   "maintainer": "listofoptions",
   "width": 21,

keyboards/converter/palm_usb/stowaway/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Palm Stowaway Serial",
-  "keyboard_folder": "converter/palm_usb/stowaway",
   "url": "",
   "maintainer": "qmk",
   "width": 15.25,

keyboards/converter/sun_usb/type3/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Sun Type 3",
-  "keyboard_folder": "converter/sun_usb/type3",
   "url": "",
   "maintainer": "qmk",
   "width": 21,

keyboards/converter/sun_usb/type5/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Sun Type 5",
-  "keyboard_folder": "converter/sun_usb/type5",
   "url": "",
   "maintainer": "qmk",
   "width": 24.75,

keyboards/converter/xt_usb/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "IBM PC XT",
-  "keyboard_folder": "converter/xt_usb",
   "url": "",
   "maintainer": "qmk",
   "width": 21,

keyboards/crbn/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "CRBN",
-  "keyboard_folder": "crbn",
   "url": "polarityworks.com",
   "maintainer": "qmk",
   "width": 12,

keyboards/dm9records/plaid/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Plaid // Through Hole",
-  "keyboard_folder": "dm9records/plaid",
   "url": "https://github.com/hsgw/plaid",
   "maintainer": "hsgw(Takuya Urakawa)",
   "width": 12,

keyboards/dm9records/tartan/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Tartan # Through Hole",
-  "keyboard_folder": "dm9records/tartan",
   "url": "https://github.com/hsgw/tartan",
   "maintainer": "hsgw(Takuya Urakawa)",
   "width": 13,

keyboards/dztech/dz96/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "DZ96",
-  "keyboard_folder": "dztech/dz96",
   "url": "",
   "maintainer": "kb-elmo",
   "width": 19,

keyboards/ealdin/quadrant/info.json

@@ -1,6 +1,5 @@
 {
     "keyboard_name": "Quadrant E-C",
-    "keyboard_folder": "ealdin/quadrant",
     "url": "https://github.com/Ealdin/keyboards/tree/master/Quadrant", 
     "maintainer": "Ealdin Keyboards", 
     "width": 14, 
@@ -22,4 +21,4 @@
                 "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4, "w":2}, {"x":7, "y":4, "w":2}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}]
             }
     }
-}
+}

keyboards/espectro/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Espectro",
-  "keyboard_folder": "espectro",
   "url": "",
   "maintainer": "qmk",
   "width": 19,

keyboards/handwired/angel/info.json

@@ -1,6 +1,5 @@
 {
     "keyboard_name": "Angel",
-    "keyboard_folder": "angel",
     "url": "https://github.com/jamessa/Angel",
     "maintainer": "jamessa",
     "width": 13,

keyboards/handwired/aranck/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Aranck",
-  "keyboard_folder": "handwired/aranck",
   "url": "https://github.com/Ardakilic",
   "maintainer": "Arda Kilicdagi",
   "width": 12,

keyboards/handwired/heisenberg/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Heisenberg",
-  "keyboard_folder": "handwired/heisenberg",
   "url": "https://github.com/Ardakilic",
   "maintainer": "Arda Kilicdagi",
   "width": 12,

keyboards/hub20/info.json

@@ -1,6 +1,5 @@
 {
     "keyboard_name": "Hub20",
-    "keyboard_folder": "hub20",
     "url": "https://github.com/joshajohnson/hub20",
     "maintainer": "joshajohnson",
     "width": 4,

keyboards/infinity60/info.json

@@ -1,6 +1,5 @@
 {
     "keyboard_name": "Infinity 60%",
-    "keyboard_folder": "infinity60",
     "url": "https://input.club/devices/infinity-keyboard/",
     "maintainer": "qmk",
     "width": 15,

keyboards/keebio/rorschach/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Rorschach",
-  "keyboard_folder": "rorschach",
   "url": "https://keeb.io",
   "maintainer": "nooges",
   "width": 15,

keyboards/keyboardio/model01/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "model01",
-  "keyboard_folder": "keyboardio/model01",
   "url": "https://keyboard.io",
   "maintainer": "qmk",
   "width": 18.5,

keyboards/keycapsss/o4l_5x12/info.json

@@ -1,6 +1,5 @@
 {
     "keyboard_name": "O4L 5x12",
-    "keyboard_folder": "keycapsss/o4l_5x12",
     "url": "https://github.com/qmk/qmk_firmware/tree/master/keyboards/keycapsss/o4l_5x12",
     "maintainer": "BenRoe",
     "width": 12,

keyboards/keycapsss/plaid_pad/info.json

@@ -1,6 +1,5 @@
 {
     "keyboard_name": "Plaid-Pad",
-    "keyboard_folder": "plaid_pad",
     "url": "https://keycapsss.com/diy-kits/104/plaid-pad-4x4-numpad",
     "maintainer": "BenRoe",
     "width": 4,

keyboards/kingly_keys/smd_milk/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "smd_milk",
-  "keyboard_folder": "kinlgy_keys/smd_milk",
   "url": "",
   "maintainer": "TheRoyalSweatshirt",
   "width": 1,

keyboards/knobgoblin/info.json

@@ -8,32 +8,32 @@
         "LAYOUT_ortho": {
             "layout": [
                 
-				        {"Label": "F17", "x": 1, "y": 0},
+		{"label": "F17", "x": 1, "y": 0},
-                {"Label": "F18", "x": 2, "y": 0},
+                {"label": "F18", "x": 2, "y": 0},
-                {"Label": "F19", "x": 3, "y": 0},
+                {"label": "F19", "x": 3, "y": 0},
-                {"Label": "F20", "x": 4, "y": 0},
+                {"label": "F20", "x": 4, "y": 0},
 
-				        {"Label": "F13", "x": 1, "y": 1},
+		{"label": "F13", "x": 1, "y": 1},
-                {"Label": "F14", "x": 2, "y": 1},
+                {"label": "F14", "x": 2, "y": 1},
-                {"Label": "F15", "x": 3, "y": 1},
+                {"label": "F15", "x": 3, "y": 1},
-			        	{"Label": "F16", "x": 4, "y": 1},
+		{"label": "F16", "x": 4, "y": 1},
 
-                {"Label": "F9", "x": 1, "y": 2},
+                {"label": "F9", "x": 1, "y": 2},
-                {"Label": "F10", "x": 2, "y": 2},
+                {"label": "F10", "x": 2, "y": 2},
-                {"Label": "F11", "x": 3, "y": 2},
+                {"label": "F11", "x": 3, "y": 2},
-                {"Label": "F12", "x": 4, "y": 2},
+                {"label": "F12", "x": 4, "y": 2},
 
-                {"Label": "K2", "x": 0, "y": 3},
+                {"label": "K2", "x": 0, "y": 3},
-			        	{"Label": "F5", "x": 1, "y": 3},
+		{"label": "F5", "x": 1, "y": 3},
-                {"Label": "F6", "x": 2, "y": 3},
+                {"label": "F6", "x": 2, "y": 3},
-                {"Label": "F7", "x": 3, "y": 3},
+                {"label": "F7", "x": 3, "y": 3},
-		        		{"Label": "F8", "x": 4, "y": 3},
+		{"label": "F8", "x": 4, "y": 3},
 
-                {"Label": "K1", "x": 0, "y": 4},
+                {"label": "K1", "x": 0, "y": 4},
-		        		{"Label": "F1", "x": 1, "y": 4},
+		{"label": "F1", "x": 1, "y": 4},
-                {"Label": "F2", "x": 2, "y": 4},
+                {"label": "F2", "x": 2, "y": 4},
-                {"Label": "F3", "x": 3, "y": 4},
+                {"label": "F3", "x": 3, "y": 4},
-                {"Label": "F4", "x": 4, "y": 4}                
+                {"label": "F4", "x": 4, "y": 4}                
 
             ]
         }

keyboards/linworks/whale75/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Lx3 Whale 75",
-  "keyboard_folder": "linworks/whale75",
   "maintainer": "ebastler",
   "width": 16.25,
   "height": 6.5,

keyboards/littlealby/mute/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Little Alby",
-  "keyboard_folder": "mute",
   "url": "",
   "maintainer": "albybarber",
   "width": 1,

keyboards/maxr1998/phoebe/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Phoebe",
-  "keyboard_folder": "maxr1998/phoebe",
   "url": "https://github.com/Maxr1998/Phoebe_Keyboard",
   "maintainer": "Maxr1998",
   "width": 12,

keyboards/maxr1998/pulse4k/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Pulse 4k",
-  "keyboard_folder": "maxr1998/pulse4k",
   "url": "https://github.com/Maxr1998/Pulse_4k",
   "maintainer": "Maxr1998",
   "width": 3,

keyboards/meson/info.json

@@ -1,6 +1,5 @@
 {
     "keyboard_name": "Meson",
-    "keyboard_folder": "meson",
     "maintainer": "qmk",
     "width": 15.5,
     "height": 4,

keyboards/naked64/info.json

@@ -74,8 +74,6 @@
             ]
         },
         "LAYOUT_with_setta21": {
-            "width": 21.5,
-            "height": 6.25,
             "layout": [
                 {"label":"pgup", "x":0.25, "y":0},
                 {"label":"ESC", "x":1.75, "y":0},

keyboards/nullbitsco/scramble/info.json

@@ -1,6 +1,5 @@
 {
     "keyboard_name": "SCRAMBLE switch tester",
-    "keyboard_folder": "nullbitsco/scramble",
     "url": "https://nullbits.co/scramble",
     "maintainer": "jaygreco",
     "width": 3,

keyboards/ortho5by12/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "ortho5by12",
-  "keyboard_folder": "ortho5by12",
   "url": "https://github.com/itsnoteasy/misc/blob/master/ortho5by12.zip",
   "maintainer": "itsnoteasy",
   "width": 12,

keyboards/planck/ez/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Planck EZ",
-  "keyboard_folder": "planck/ez",
   "url": "https://ergodox-ez.com/pages/planck",
   "maintainer": "jackhumbert",
   "width": 12,

keyboards/planck/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Planck",
-  "keyboard_folder": "planck",
   "url": "https://olkb.com/planck",
   "maintainer": "jackhumbert",
   "width": 12,

keyboards/planck/light/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Planck Light",
-  "keyboard_folder": "planck/light",
   "url": "https://olkb.com/planck",
   "maintainer": "jackhumbert",
   "width": 12,

keyboards/planck/rev1/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Planck rev 1",
-  "keyboard_folder": "planck/rev1",
   "url": "https://olkb.com/planck",
   "maintainer": "jackhumbert",
   "width": 12,

keyboards/planck/rev2/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Planck rev 2",
-  "keyboard_folder": "planck/rev2",
   "url": "https://olkb.com/planck",
   "maintainer": "jackhumbert",
   "width": 12,

keyboards/planck/rev3/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Planck rev 3",
-  "keyboard_folder": "planck/rev3",
   "url": "https://olkb.com/planck",
   "maintainer": "jackhumbert",
   "width": 12,

keyboards/planck/rev4/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Planck rev 4",
-  "keyboard_folder": "planck/rev4",
   "url": "https://olkb.com/planck",
   "maintainer": "jackhumbert",
   "width": 12,

keyboards/planck/rev5/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Planck rev 5",
-  "keyboard_folder": "planck/rev5",
   "url": "https://olkb.com/planck",
   "maintainer": "jackhumbert",
   "width": 12,

keyboards/planck/rev6/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Planck rev 6",
-  "keyboard_folder": "planck/rev6",
   "url": "https://olkb.com/planck",
   "maintainer": "jackhumbert",
   "width": 12,

keyboards/preonic/info.json

@@ -1,6 +1,5 @@
 {
     "keyboard_name": "Preonic",
-    "keyboard_folder": "preonic",
     "url": "https://olkb.com/preonic",
     "maintainer": "jackhumbert",
     "width": 12,

keyboards/preonic/rev3/info.json

@@ -1,6 +1,5 @@
 {
     "keyboard_name": "Preonic rev. 3",
-    "keyboard_folder": "preonic/rev3",
     "url": "https://olkb.com/preonic",
     "maintainer": "jackhumbert",
     "width": 12,

keyboards/spaceman/2_milk/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "2% Milk",
-  "keyboard_folder": "2_milk",
   "url": "",
   "maintainer": "Spaceman",
   "width": 1,

keyboards/spaceman/pancake/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Pancake",
-  "keyboard_folder": "Pancake",
   "url": "",
   "maintainer": "Spaceman",
   "width": 12,

keyboards/spaceman/yun65/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "yun65",
-  "keyboard_folder": "spaceman/yun65",
   "url": "",
   "maintainer": "Spaceman",
   "width": 1,

keyboards/uno/info.json

@@ -1,6 +1,5 @@
 {
     "keyboard_name": "Uno",
-    "keyboard_folder": "uno",
     "url": "https://www.reddit.com/r/mechmarket/comments/gyijm7/gb_uno/",
     "maintainer": "Snipeye",
     "width": 1,

keyboards/viktus/styrka/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "Styrka",
-  "keyboard_folder": "viktus/styrka",
   "url": "https",
   "maintainer": "jrfhoutx",
   "width": 18.25,

keyboards/winkeyless/bminiex/info.json

@@ -1,6 +1,5 @@
 {
   "keyboard_name": "winkeyless.kr B.mini EX",
-  "keyboard_folder": "bminiex",
   "url": "https://winkeyless.kr/product/b-mini-ex-x2-pcb/",
   "maintainer": "qmk",
   "width": 20.25,

lib/python/qmk/info.py

@@ -454,8 +454,9 @@ def _find_all_layouts(info_data, keyboard):
                 if these_layouts:
                     layouts.update(these_layouts)
 
-                if these_aliases:
+                for alias, alias_text in these_aliases.items():
-                    aliases.update(these_aliases)
+                    if alias_text in layouts:
+                        aliases[alias] = alias_text
 
     return layouts, aliases
 

tmk_core/common/action.c

@@ -76,6 +76,11 @@ void action_exec(keyevent_t event) {
 #endif
     }
 
+    if (event.pressed) {
+        // clear the potential weak mods left by previously pressed keys
+        clear_weak_mods();
+    }
+
 #ifdef SWAP_HANDS_ENABLE
     if (!IS_NOEVENT(event)) {
         process_hand_swap(&event);
@@ -237,11 +242,6 @@ void process_action(keyrecord_t *record, action_t action) {
     uint8_t tap_count = record->tap.count;
 #endif
 
-    if (event.pressed) {
-        // clear the potential weak mods left by previously pressed keys
-        clear_weak_mods();
-    }
-
 #ifndef NO_ACTION_ONESHOT
     bool do_release_oneshot = false;
     // notice we only clear the one shot layer if the pressed key is not a modifier.

tmk_core/protocol/vusb/main.c

@@ -87,9 +87,9 @@ static void vusb_wakeup(void) {
     vusb_suspended = false;
     suspend_wakeup_init();
 
-#ifdef SLEEP_LED_ENABLE
+#    ifdef SLEEP_LED_ENABLE
     sleep_led_disable();
-#endif
+#    endif
 }
 #endif
 

util/docker_build.sh

@@ -17,12 +17,27 @@ done
 if [ $# -gt 1 ]; then
 	errcho "$USAGE"
 	exit 1
-elif ! command -v docker >/dev/null 2>&1; then
-	errcho "Error: docker not found"
-	errcho "See https://docs.docker.com/install/#supported-platforms for installation instructions"
-	exit 2
 fi
 
+# Allow $RUNTIME to be overriden by the user as an environment variable
+# Else check if either docker or podman exit and set them as runtime
+# if none are found error out
+if [ -z "$RUNTIME" ]; then
+	if command -v docker >/dev/null 2>&1; then
+		RUNTIME="docker"
+	elif command -v podman >/dev/null 2>&1; then
+		RUNTIME="podman"
+	else
+		errcho "Error: no compatible container runtime found."
+		errcho "Either podman or docker are required."
+		errcho "See https://podman.io/getting-started/installation"
+		errcho "or https://docs.docker.com/install/#supported-platforms"
+		errcho "for installation instructions."
+		exit 2
+	fi
+fi
+	
+
 # Determine arguments
 if [ $# -eq 0 ]; then
 	printf "keyboard=" && read -r keyboard
@@ -41,20 +56,26 @@ if [ -z "$keyboard" ]; then
 	keyboard=all
 fi
 if [ -n "$target" ]; then
-	if [ "$(uname)" = "Linux" ] || docker-machine active >/dev/null 2>&1; then
+	# IF we are using docker on non Linux and docker-machine isn't working print an error
-		usb_args="--privileged -v /dev:/dev"
+	# ELSE set usb_args
-	else
+	if [ ! "$(uname)" = "Linux" ] && [ "$RUNTIME" = "docker" ] && ! docker-machine active >/dev/null 2>&1; then
 		errcho "Error: target requires docker-machine to work on your platform"
 		errcho "See http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos"
 		errcho "Consider flashing with QMK Toolbox (https://github.com/qmk/qmk_toolbox) instead"
 		exit 3
+	else
+		usb_args="--privileged -v /dev:/dev"
 	fi
 fi
 dir=$(pwd -W 2>/dev/null) || dir=$PWD  # Use Windows path if on Windows
 
+if [ "$RUNTIME" = "docker" ]; then
+	uid_arg="--user $(id -u):$(id -g)"
+fi
+
 # Run container and build firmware
-docker run --rm -it $usb_args \
+"$RUNTIME" run --rm -it $usb_args \
-	--user $(id -u):$(id -g) \
+	$uid_arg \
 	-w /qmk_firmware \
 	-v "$dir":/qmk_firmware \
 	-e ALT_GET_KEYBOARDS=true \