Consolidate udev rules into a single file (#9693 )

* Consolidate udev rules into a single file * Update rules in doctor.py * Simplify doctor rule checking * Fix errors * Add TMK "FEED" VID to list of deprecated udev rules * A comma would be nice * Split rules back up into bootloaders * Link to docs page in "missing" case * Add Pololu VID * Be more specific about Caterina devices, and add LilyPad PID
Add logic for AT90USBxx7 where needed (#10203 )
2020-09-27 20:36:33 +10:00 · 2020-09-27 20:33:03 +10:00 · 2020-09-26 19:11:40 -04:00 · 2020-09-26 19:42:40 +01:00 · 2020-09-25 22:39:14 -07:00 · 2020-09-25 22:33:49 -07:00
43 changed files with 1485 additions and 141 deletions
@@ -35,30 +35,30 @@
 ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
    OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
    OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
        BOOTLOADER_SIZE = 4096
    endif
-    ifeq ($(strip $(MCU)), at90usb1286)
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
        BOOTLOADER_SIZE = 8192
    endif
 endif
 ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
    OPT_DEFS += -DBOOTLOADER_LUFA_DFU
    OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
        BOOTLOADER_SIZE = 4096
    endif
-    ifeq ($(strip $(MCU)), at90usb1286)
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
        BOOTLOADER_SIZE = 8192
    endif
 endif
 ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
    OPT_DEFS += -DBOOTLOADER_QMK_DFU
    OPT_DEFS += -DBOOTLOADER_DFU
-    ifneq (,$(filter $(MCU), at90usb646 atmega16u2 atmega16u4 atmega32u2 atmega32u4))
+    ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
        BOOTLOADER_SIZE = 4096
    endif
-    ifeq ($(strip $(MCU)), at90usb1286)
+    ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
        BOOTLOADER_SIZE = 8192
    endif
 endif
@@ -13,65 +13,76 @@ An example of using `sudo`, when your controller is ATMega32u4:
 or just:
-    $ sudo make <keyboard>:<keymap>:dfu
+    $ sudo make <keyboard>:<keymap>:flash
 Note that running `make` with `sudo` is generally ***not*** a good idea, and you should use one of the former methods, if possible.
 ### Linux `udev` Rules
-On Linux, you'll need proper privileges to access the MCU. You can either use
+
-`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`. Once added run the following:
+On Linux, you'll need proper privileges to communicate with the bootloader device. You can either use `sudo` when flashing firmware, or place this file in `/etc/udev/rules.d/`:
-```console
+
 **/etc/udev/rules.d/50-qmk.rules:**
 ```
 # Atmel DFU
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega16U2
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega32U2
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega16U4
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess" # ATmega32U4
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess" # AT90USB64
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess" # AT90USB128
 # Input Club
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1C11", ATTRS{idProduct}=="B007", TAG+="uaccess", RUN{builtin}+="uaccess"
 # STM32duino
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1EAF", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
 # STM32 DFU
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="DF11", TAG+="uaccess", RUN{builtin}+="uaccess"
 # BootloadHID
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DF", TAG+="uaccess", RUN{builtin}+="uaccess"
 # USBAspLoader
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uaccess", RUN{builtin}+="uaccess"
 # ModemManager should ignore the following devices
 # Atmel SAM-BA (Massdrop)
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="6124", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
 # Caterina (Pro Micro)
 #   Spark Fun Electronics
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Pro Micro 3V3/8MHz
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Pro Micro 5V/16MHz
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # LilyPad 3V3/8MHz (and some Pro Micro clones)
 #   Pololu Electronics
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # A-Star 32U4
 #   Arduino SA
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Leonardo
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Micro
 #   Adafruit Industries LLC
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Feather 32U4
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # ItsyBitsy 32U4 3V3/8MHz
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # ItsyBitsy 32U4 5V/16MHz
 #   dog hunter AG
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Leonardo
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Micro
 ```
 Once added, run the following:
 ```
 sudo udevadm control --reload-rules
 sudo udevadm trigger
 ```
-**/etc/udev/rules.d/50-atmel-dfu.rules:**
+**Note:** With older versions of ModemManager (< 1.12), filtering only works when not in strict mode. The following commands can update that setting:
 ```
 # Atmel ATMega32U4
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess", RUN{builtin}+="uaccess"
 # Atmel USBKEY AT90USB1287
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess", RUN{builtin}+="uaccess"
 # Atmel ATMega32U2
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", TAG+="uaccess", RUN{builtin}+="uaccess"
 ```
 **/etc/udev/rules.d/54-input-club-keyboard.rules:**
 ```
 # Input Club keyboard bootloader
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", ATTRS{idProduct}=="b007", TAG+="uaccess", RUN{builtin}+="uaccess"
 ```
 **/etc/udev/rules.d/55-caterina.rules:**
 ```
 # ModemManager should ignore the following devices
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
 ```
 **Note:** With older (before 1.12) ModemManager, filtering only works when not in strict mode, the following commands can update that settings:
 ```console
 printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf
 sudo systemctl daemon-reload
 sudo systemctl restart ModemManager
 ```
 **/etc/udev/rules.d/56-dfu-util.rules:**
 ```
 # stm32duino
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
 # Generic stm32
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", TAG+="uaccess", RUN{builtin}+="uaccess"
 ```
 **/etc/udev/rules.d/57-bootloadhid.rules:**
 ```
 # bootloadHID
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", TAG+="uaccess", RUN{builtin}+="uaccess"
 ```
 ### Serial device is not detected in bootloader mode on Linux
 Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
 Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
@@ -96,46 +107,6 @@ You can buy a really unique VID:PID here. I don't think you need this for person
 - http://www.obdev.at/products/vusb/license.html
 - http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
 ## BOOTLOADER_SIZE for AVR
 Note that Teensy2.0++ bootloader size is 2048byte. Some Makefiles may have wrong comment.
 ```
 # Boot Section Size in *bytes*
 #   Teensy halfKay   512
 #   Teensy++ halfKay 2048
 #   Atmel DFU loader 4096       (TMK Alt Controller)
 #   LUFA bootloader  4096
 #   USBaspLoader     2048
 OPT_DEFS += -DBOOTLOADER_SIZE=2048
 ```
 ## `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` on MacOS
 This is an issue with updating on brew, causing symlinks that avr-gcc depend on getting mangled.
 The solution is to remove and reinstall all affected modules.
 ```
 brew rm avr-gcc avr-gcc@8 dfu-programmer dfu-util gcc-arm-none-eabi arm-gcc-bin@8 avrdude qmk
 brew install qmk/qmk/qmk
 brew link --force avr-gcc@8
 brew link --force arm-gcc-bin@8
 ```
 ### `avr-gcc` and LUFA
 If you updated your `avr-gcc` and you see errors involving LUFA, for example:
 `lib/lufa/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h:380:5: error: 'const' attribute on function returning 'void'`
 For now, you need to rollback `avr-gcc` to 8 in Homebrew.
 ```
 brew uninstall --force avr-gcc
 brew install avr-gcc@8
 brew link --force avr-gcc@8
 ```
 ### I just flashed my keyboard and it does nothing/keypresses don't register - it's also ARM (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019)
 Due to how EEPROM works on ARM based chips, saved settings may no longer be valid.  This affects the default layers, and *may*, under certain circumstances we are still figuring out, make the keyboard unusable.  Resetting the EEPROM will correct this.
@@ -31,20 +31,6 @@ Check:
 - try using 'print' function instead of debug print. See **common/print.h**.
 - disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).
 ## Linux or UNIX Like System Requires Super User Privilege
 Just use 'sudo' to execute *hid_listen* with privilege.
 ```
 $ sudo hid_listen
 ```
 Or add an *udev rule* for TMK devices with placing a file in rules directory. The directory may vary on each system.
 File: /etc/udev/rules.d/52-tmk-keyboard.rules(in case of Ubuntu)
 ```
 # tmk keyboard products     https://github.com/tmk/tmk_keyboard
 SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
 ```
 ***
 # Miscellaneous
@@ -47,7 +47,7 @@ As of [PR#1359](https://github.com/qmk/qmk_firmware/pull/1359/), there is a new
 This makes tap and hold keys (like Mod Tap) work better for fast typists, or for high `TAPPING_TERM` settings.
-If you press a Mod Tap key, tap another key (press and release) and then release the Mod Tap key, all within the tapping term, it will output the "tapping" function for both keys.
+If you press a Mod Tap key, tap another key (press and release) and then release the Mod Tap key, all within the tapping term, it will output the tapping function for both keys.
 For Instance:
@@ -87,7 +87,7 @@ To enable this setting, add this to your `config.h`:
 #define IGNORE_MOD_TAP_INTERRUPT
 ```
-Similar to Permissive Hold, this alters how the firmware processes inputs for fast typists. If you press a Mod Tap key, press another key, release the Mod Tap key, and then release the normal key, it would normally output the "tapping" function for both keys. This may not be desirable for rolling combo keys. 
+Similar to Permissive Hold, this alters how the firmware processes inputs for fast typists. If you press a Mod Tap key, press another key, release the Mod Tap key, and then release the normal key, it would normally output the tapping function for both keys. This may not be desirable for rolling combo keys.
 Setting `Ignore Mod Tap Interrupt` requires  holding both keys for the `TAPPING_TERM` to trigger the hold function (the mod).
@@ -132,21 +132,21 @@ To enable `tapping force hold`, add the following to your `config.h`:
 #define TAPPING_FORCE_HOLD
 ```
-When the user holds a key after tap, this repeats the tapped key rather to hold a modifier key.  This allows to use auto repeat for the tapped key.  
+When the user holds a key after tapping it, the tapping function is repeated by default, rather than activating the hold function. This allows keeping the ability to auto-repeat the tapping function of a dual-role key. `TAPPING_FORCE_HOLD` removes that ability to let the user activate the hold function instead, in the case of holding the dual-role key after having tapped it.
 Example:
- SFT_T(KC_A) Down
+- `SFT_T(KC_A)` Down
- SFT_T(KC_A) Up
+- `SFT_T(KC_A)` Up
- SFT_T(KC_A) Down
+- `SFT_T(KC_A)` Down
- wait more than tapping term...
+- wait until the tapping term expires...
- SFT_T(KC_A) Up
+- `SFT_T(KC_A)` Up
 With default settings, `a` will be sent on the first release, then `a` will be sent on the second press allowing the computer to trigger its auto repeat function.
 With `TAPPING_FORCE_HOLD`, the second press will be interpreted as a Shift, allowing to use it as a modifier shortly after having used it as a tap.
-!> `TAPPING_FORCE_HOLD` will break anything that uses tapping toggles (Such as the `TT` layer keycode, and the One Shot Tapping Toggle).
+!> `TAPPING_FORCE_HOLD` will break anything that uses tapping toggles (Such as the `TT` layer keycode, and the One Shot Tap Toggle).
 For more granular control of this feature, you can add the following to your `config.h`:
@@ -183,7 +183,7 @@ For instance, holding and releasing `LT(2, KC_SPACE)` without hitting another ke
 One thing that you may notice is that we include the key record for all of the "per key" functions, and may be wondering why we do that.
-Well, it's simply really: customization.  But specifically, it depends on how your keyboard is wired up.  For instance, if each row is actually using a row in the keyboard's matrix, then it may be simpler to use `if (record->event.row == 3)` instead of checking a whole bunch of keycodes.  Which is especially good for those people using the Tap Hold type keys on the home row. So you could fine tune those to not interfere with your normal typing. 
+Well, it's simple really: customization.  But specifically, it depends on how your keyboard is wired up.  For instance, if each row is actually using a row in the keyboard's matrix, then it may be simpler to use `if (record->event.row == 3)` instead of checking a whole bunch of keycodes.  Which is especially good for those people using the Tap Hold type keys on the home row. So you could fine tune those to not interfere with your normal typing.
 ## Why is there no `*_kb` or `*_user` functions?!
@@ -0,0 +1,49 @@
 /*
 Copyright 2020 Team Mechlovin
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "config_common.h"
 /* USB Device descriptor parameter */
 #define VENDOR_ID    0x4D4C
 #define MANUFACTURER Team Mechlovin
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 15
 /*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */
 #define MATRIX_ROW_PINS { A4, A5, A3, A2, A1 }
 #define MATRIX_COL_PINS { B11, B10, B2, B1, B0, A7, A6, A0, C15, B4, B5, B3, C13, C14, A13 }
 #define DIODE_DIRECTION COL2ROW
 #define BACKLIGHT_PIN B8
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_PWM_DRIVER PWMD3
 #define BACKLIGHT_PWM_CHANNEL 3
 #define BACKLIGHT_LEVELS 3
@@ -0,0 +1,35 @@
 /* Copyright 2020 Team Mechlovin
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "hannah65.h"
 void matrix_init_kb(void) {
    matrix_init_user();
    led_init_ports();
 }
 void led_init_ports(void) {
    setPinOutput(B9);
    writePinLow(B9);
 }
 bool led_update_kb(led_t led_state) {
    if(led_update_user(led_state)) {
        writePin(B9, led_state.caps_lock);
    }
    return true;
 }
@@ -0,0 +1,25 @@
 /* Copyright 2020 Team Mechlovin
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "quantum.h"
 #if defined(KEYBOARD_mechlovin_hannah65_rev1)
 #    include "rev1.h"
 #elif defined(KEYBOARD_mechlovin_hannah65_mechlovin9)
 #    include "mechlovin9.h"
 #endif
@@ -0,0 +1,5 @@
 #pragma once
 #define PRODUCT_ID   0x6501
 #define DEVICE_VER   0x0001
 #define PRODUCTION   Mechlovin9
@@ -0,0 +1,80 @@
 {
    "keyboard_name": "mechlovin9",
    "url": "",
    "maintainer": "Team Mechlovin",
    "width": 16,
    "height": 5,
    "layouts": {
        "LAYOUT_all": {
            "layout": [
                {"label":"K00 (B0,B5)", "x":0, "y":0},
                {"label":"K01 (B0,B6)", "x":1, "y":0},
                {"label":"K02 (B0,B7)", "x":2, "y":0},
                {"label":"K03 (B0,C0)", "x":3, "y":0},
                {"label":"K04 (B0,C1)", "x":4, "y":0},
                {"label":"K05 (B0,C2)", "x":5, "y":0},
                {"label":"K06 (B0,C3)", "x":6, "y":0},
                {"label":"K07 (B0,C4)", "x":7, "y":0},
                {"label":"K08 (B0,C5)", "x":8, "y":0},
                {"label":"K09 (B0,C6)", "x":9, "y":0},
                {"label":"K0A (B0,C7)", "x":10, "y":0},
                {"label":"K0B (B0,D0)", "x":11, "y":0},
                {"label":"K0C (B0,D1)", "x":12, "y":0},
                {"label":"K0D (B0,D2)", "x":13, "y":0},
                {"label":"K1D (B1,D2)", "x":14, "y":0},
                {"label":"K0E (B0,D3)", "x":15, "y":0},
                {"label":"K10 (B1,B5)", "x":0, "y":1, "w":1.5},
                {"label":"K11 (B1,B6)", "x":1.5, "y":1},
                {"label":"K12 (B1,B7)", "x":2.5, "y":1},
                {"label":"K13 (B1,C0)", "x":3.5, "y":1},
                {"label":"K14 (B1,C1)", "x":4.5, "y":1},
                {"label":"K15 (B1,C2)", "x":5.5, "y":1},
                {"label":"K16 (B1,C3)", "x":6.5, "y":1},
                {"label":"K17 (B1,C4)", "x":7.5, "y":1},
                {"label":"K18 (B1,C5)", "x":8.5, "y":1},
                {"label":"K19 (B1,C6)", "x":9.5, "y":1},
                {"label":"K1A (B1,C7)", "x":10.5, "y":1},
                {"label":"K1B (B1,D0)", "x":11.5, "y":1},
                {"label":"K1C (B1,D1)", "x":12.5, "y":1},
                {"label":"K2C (B2,D1)", "x":13.5, "y":1, "w":1.5},
                {"label":"K1E (B1,D3)", "x":15, "y":1},
                {"label":"K20 (B2,B5)", "x":0, "y":2, "w":1.75},
                {"label":"K21 (B2,B6)", "x":1.75, "y":2},
                {"label":"K22 (B2,B7)", "x":2.75, "y":2},
                {"label":"K23 (B2,C0)", "x":3.75, "y":2},
                {"label":"K24 (B2,C1)", "x":4.75, "y":2},
                {"label":"K25 (B2,C2)", "x":5.75, "y":2},
                {"label":"K26 (B2,C3)", "x":6.75, "y":2},
                {"label":"K27 (B2,C4)", "x":7.75, "y":2},
                {"label":"K28 (B2,C5)", "x":8.75, "y":2},
                {"label":"K29 (B2,C6)", "x":9.75, "y":2},
                {"label":"K2A (B2,C7)", "x":10.75, "y":2},
                {"label":"K2B (B2,D0)", "x":11.75, "y":2},
                {"label":"K2D (B2,D2)", "x":12.75, "y":2, "w":2.25},
                {"label":"K2E (B2,D3)", "x":15, "y":2},
                {"label":"K30 (B3,B5)", "x":0, "y":3, "w":2.25},
                {"label":"K32 (B3,B7)", "x":2.25, "y":3},
                {"label":"K33 (B3,C0)", "x":3.25, "y":3},
                {"label":"K34 (B3,C1)", "x":4.25, "y":3},
                {"label":"K35 (B3,C2)", "x":5.25, "y":3},
                {"label":"K36 (B3,C3)", "x":6.25, "y":3},
                {"label":"K37 (B3,C4)", "x":7.25, "y":3},
                {"label":"K38 (B3,C5)", "x":8.25, "y":3},
                {"label":"K39 (B3,C6)", "x":9.25, "y":3},
                {"label":"K3A (B3,C7)", "x":10.25, "y":3},
                {"label":"K3B (B3,D0)", "x":11.25, "y":3},
                {"label":"K3C (B3,D1)", "x":12.25, "y":3, "w":1.75},
                {"label":"K3D (B3,D2)", "x":14, "y":3},
                {"label":"K3E (B3,D3)", "x":15, "y":3},
                {"label":"K40 (B4,B5)", "x":0, "y":4, "w":1.5},
                {"label":"K41 (B4,B6)", "x":1.5, "y":4},
                {"label":"K42 (B4,B7)", "x":2.5, "y":4, "w":1.5},
                {"label":"K46 (B4,C3)", "x":4, "y":4, "w":7},
                {"label":"K4B (B4,D0)", "x":11, "y":4, "w":1.5},
                {"label":"K4C (B4,D1)", "x":13, "y":4},
                {"label":"K4D (B4,D2)", "x":14, "y":4},
                {"label":"K4E (B4,D3)", "x":15, "y":4}
            ]
        }
    }
 }
@@ -0,0 +1,29 @@
 /* Copyright 2020 Team Mechlovin
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    [0] = LAYOUT_all(
        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,  KC_HOME,
        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_END,
        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                      KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
    ),
 };
@@ -0,0 +1 @@
 # The default keymap for mechlovin9
@@ -0,0 +1,50 @@
 /* Copyright 2020 Team Mechlovin
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    [0] = LAYOUT_all(
        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,  KC_HOME,
        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
        KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_END,
        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                                      KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
    ),
    [1] = LAYOUT_all(
        KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
        KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
        KC_TRNS,         KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,
        KC_TRNS,KC_TRNS, KC_TRNS,                             KC_TRNS,                                     KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS
    ),
    [2] = LAYOUT_all(
        KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
        KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
        KC_TRNS,         KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,
        KC_TRNS,KC_TRNS, KC_TRNS,                             KC_TRNS,                                     KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS
    ),
    [3] = LAYOUT_all(
        KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
        KC_TRNS,KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
        KC_TRNS,         KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,
        KC_TRNS,KC_TRNS, KC_TRNS,                             KC_TRNS,                                     KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS
    ),
 };
@@ -0,0 +1 @@
 VIA_ENABLE = yes
@@ -0,0 +1,33 @@
 /* Copyright 2020 Team Mechlovin
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "quantum.h"
 #define LAYOUT_all( \
    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K1D, K0E,   \
    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C,      K1E,   \
    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,           K2D, K2E,   \
    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,      K3D, K3E,   \
    K40, K41, K42,               K46,                      K4B,      K4C, K4D, K4E    \
 ) { \
    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E   }, \
    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E   }, \
    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   K2E   }, \
    { K30,   KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, KC_NO, K4B,   K4C,   K4D,   K4E   }, \
 }
@@ -0,0 +1,15 @@
 # mechlovin9
 ![mechlovin9](https://i.imgur.com/T5Lm6OYl.png)
 A 65% PCB, compatible with Kyuu.
 * Keyboard Maintainer: [Team Mechlovin](https://github.com/mechlovin)
 * Hardware Supported: Kyuu Keyboard.
 * Hardware Availability: [Reddit GB](https://www.reddit.com/r/mechmarket/comments/i61par/gb_mechlovin_9_a_kyuu_65_keyboard_compatible_pcb/)
 Make example for this keyboard (after setting up your build environment):
    make mechlovin/hannah65/mechlovin9:default
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -0,0 +1,15 @@
 # hannah65
 ![hannah65](https://i.imgur.com/qf0BYI2l.png)
 A 65% PCB, compatible with E6.5, Kyuu,...
 * Keyboard Maintainer: [Team Mechlovin](https://github.com/mechlovin)
 * Hardware Supported: Hannah65, STM32F303
 * Hardware Availability: [Mechlovin Store](https://mechlove.com/)
 Make example for this keyboard (after setting up your build environment):
    make mechlovin/hannah65/rev1:default
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -0,0 +1,5 @@
 #pragma once
 #define PRODUCT_ID   0x6500
 #define DEVICE_VER   0x0001
 #define PRODUCTION   Hannah65
@@ -0,0 +1,225 @@
 {
    "keyboard_name": "hannah65-rev1",
    "url": "",
    "maintainer": "Team Mechlovin",
    "width": 16,
    "height": 5,
    "layouts": {
        "LAYOUT_all": {
            "layout": [
                {"label":"K00 (B0,B5)", "x":0, "y":0},
                {"label":"K01 (B0,B6)", "x":1, "y":0},
                {"label":"K02 (B0,B7)", "x":2, "y":0},
                {"label":"K03 (B0,C0)", "x":3, "y":0},
                {"label":"K04 (B0,C1)", "x":4, "y":0},
                {"label":"K05 (B0,C2)", "x":5, "y":0},
                {"label":"K06 (B0,C3)", "x":6, "y":0},
                {"label":"K07 (B0,C4)", "x":7, "y":0},
                {"label":"K08 (B0,C5)", "x":8, "y":0},
                {"label":"K09 (B0,C6)", "x":9, "y":0},
                {"label":"K0A (B0,C7)", "x":10, "y":0},
                {"label":"K0B (B0,D0)", "x":11, "y":0},
                {"label":"K0C (B0,D1)", "x":12, "y":0},
                {"label":"K0D (B0,D2)", "x":13, "y":0},
                {"label":"K1D (B1,D2)", "x":14, "y":0},
                {"label":"K0E (B0,D3)", "x":15, "y":0},
                {"label":"K10 (B1,B5)", "x":0, "y":1, "w":1.5},
                {"label":"K11 (B1,B6)", "x":1.5, "y":1},
                {"label":"K12 (B1,B7)", "x":2.5, "y":1},
                {"label":"K13 (B1,C0)", "x":3.5, "y":1},
                {"label":"K14 (B1,C1)", "x":4.5, "y":1},
                {"label":"K15 (B1,C2)", "x":5.5, "y":1},
                {"label":"K16 (B1,C3)", "x":6.5, "y":1},
                {"label":"K17 (B1,C4)", "x":7.5, "y":1},
                {"label":"K18 (B1,C5)", "x":8.5, "y":1},
                {"label":"K19 (B1,C6)", "x":9.5, "y":1},
                {"label":"K1A (B1,C7)", "x":10.5, "y":1},
                {"label":"K1B (B1,D0)", "x":11.5, "y":1},
                {"label":"K1C (B1,D1)", "x":12.5, "y":1},
                {"label":"K2C (B2,D1)", "x":13.5, "y":1, "w":1.5},
                {"label":"K1E (B1,D3)", "x":15, "y":1},
                {"label":"K20 (B2,B5)", "x":0, "y":2, "w":1.75},
                {"label":"K21 (B2,B6)", "x":1.75, "y":2},
                {"label":"K22 (B2,B7)", "x":2.75, "y":2},
                {"label":"K23 (B2,C0)", "x":3.75, "y":2},
                {"label":"K24 (B2,C1)", "x":4.75, "y":2},
                {"label":"K25 (B2,C2)", "x":5.75, "y":2},
                {"label":"K26 (B2,C3)", "x":6.75, "y":2},
                {"label":"K27 (B2,C4)", "x":7.75, "y":2},
                {"label":"K28 (B2,C5)", "x":8.75, "y":2},
                {"label":"K29 (B2,C6)", "x":9.75, "y":2},
                {"label":"K2A (B2,C7)", "x":10.75, "y":2},
                {"label":"K2B (B2,D0)", "x":11.75, "y":2},
                {"label":"K2D (B2,D2)", "x":12.75, "y":2, "w":2.25},
                {"label":"K2E (B2,D3)", "x":15, "y":2},
                {"label":"K30 (B3,B5)", "x":0, "y":3, "w":1.25},
                {"label":"K31 (B3,B6)", "x":1.25, "y":3},
                {"label":"K32 (B3,B7)", "x":2.25, "y":3},
                {"label":"K33 (B3,C0)", "x":3.25, "y":3},
                {"label":"K34 (B3,C1)", "x":4.25, "y":3},
                {"label":"K35 (B3,C2)", "x":5.25, "y":3},
                {"label":"K36 (B3,C3)", "x":6.25, "y":3},
                {"label":"K37 (B3,C4)", "x":7.25, "y":3},
                {"label":"K38 (B3,C5)", "x":8.25, "y":3},
                {"label":"K39 (B3,C6)", "x":9.25, "y":3},
                {"label":"K3A (B3,C7)", "x":10.25, "y":3},
                {"label":"K3B (B3,D0)", "x":11.25, "y":3},
                {"label":"K3C (B3,D1)", "x":12.25, "y":3, "w":1.75},
                {"label":"K3D (B3,D2)", "x":14, "y":3},
                {"label":"K3E (B3,D3)", "x":15, "y":3},
                {"label":"K40 (B4,B5)", "x":0, "y":4, "w":1.25},
                {"label":"K41 (B4,B6)", "x":1.25, "y":4, "w":1.25},
                {"label":"K42 (B4,B7)", "x":2.5, "y":4, "w":1.25},
                {"label":"K46 (B4,C3)", "x":3.75, "y":4, "w":6.25},
                {"label":"K4A (B4,C7)", "x":10, "y":4, "w":1.25},
                {"label":"K4B (B4,D0)", "x":11.25, "y":4, "w":1.25},
                {"label":"K4C (B4,D1)", "x":13, "y":4},
                {"label":"K4D (B4,D2)", "x":14, "y":4},
                {"label":"K4E (B4,D3)", "x":15, "y":4}
            ]
        },
        "LAYOUT_65_ansi_blocker": {
            "layout": [
                {"label":"K00 (B0,B5)", "x":0, "y":0},
                {"label":"K01 (B0,B6)", "x":1, "y":0},
                {"label":"K02 (B0,B7)", "x":2, "y":0},
                {"label":"K03 (B0,C0)", "x":3, "y":0},
                {"label":"K04 (B0,C1)", "x":4, "y":0},
                {"label":"K05 (B0,C2)", "x":5, "y":0},
                {"label":"K06 (B0,C3)", "x":6, "y":0},
                {"label":"K07 (B0,C4)", "x":7, "y":0},
                {"label":"K08 (B0,C5)", "x":8, "y":0},
                {"label":"K09 (B0,C6)", "x":9, "y":0},
                {"label":"K0A (B0,C7)", "x":10, "y":0},
                {"label":"K0B (B0,D0)", "x":11, "y":0},
                {"label":"K0C (B0,D1)", "x":12, "y":0},
                {"label":"K0D (B0,D2)", "x":13, "y":0, "w":2},
                {"label":"K0E (B0,D3)", "x":15, "y":0},
                {"label":"K10 (B1,B5)", "x":0, "y":1, "w":1.5},
                {"label":"K11 (B1,B6)", "x":1.5, "y":1},
                {"label":"K12 (B1,B7)", "x":2.5, "y":1},
                {"label":"K13 (B1,C0)", "x":3.5, "y":1},
                {"label":"K14 (B1,C1)", "x":4.5, "y":1},
                {"label":"K15 (B1,C2)", "x":5.5, "y":1},
                {"label":"K16 (B1,C3)", "x":6.5, "y":1},
                {"label":"K17 (B1,C4)", "x":7.5, "y":1},
                {"label":"K18 (B1,C5)", "x":8.5, "y":1},
                {"label":"K19 (B1,C6)", "x":9.5, "y":1},
                {"label":"K1A (B1,C7)", "x":10.5, "y":1},
                {"label":"K1B (B1,D0)", "x":11.5, "y":1},
                {"label":"K1C (B1,D1)", "x":12.5, "y":1},
                {"label":"K2C (B2,D1)", "x":13.5, "y":1, "w":1.5},
                {"label":"K1E (B1,D3)", "x":15, "y":1},
                {"label":"K20 (B2,B5)", "x":0, "y":2, "w":1.75},
                {"label":"K21 (B2,B6)", "x":1.75, "y":2},
                {"label":"K22 (B2,B7)", "x":2.75, "y":2},
                {"label":"K23 (B2,C0)", "x":3.75, "y":2},
                {"label":"K24 (B2,C1)", "x":4.75, "y":2},
                {"label":"K25 (B2,C2)", "x":5.75, "y":2},
                {"label":"K26 (B2,C3)", "x":6.75, "y":2},
                {"label":"K27 (B2,C4)", "x":7.75, "y":2},
                {"label":"K28 (B2,C5)", "x":8.75, "y":2},
                {"label":"K29 (B2,C6)", "x":9.75, "y":2},
                {"label":"K2A (B2,C7)", "x":10.75, "y":2},
                {"label":"K2B (B2,D0)", "x":11.75, "y":2},
                {"label":"K2D (B2,D2)", "x":12.75, "y":2, "w":2.25},
                {"label":"K2E (B2,D3)", "x":15, "y":2},
                {"label":"K30 (B3,B5)", "x":0, "y":3, "w":2.25},
                {"label":"K32 (B3,B7)", "x":2.25, "y":3},
                {"label":"K33 (B3,C0)", "x":3.25, "y":3},
                {"label":"K34 (B3,C1)", "x":4.25, "y":3},
                {"label":"K35 (B3,C2)", "x":5.25, "y":3},
                {"label":"K36 (B3,C3)", "x":6.25, "y":3},
                {"label":"K37 (B3,C4)", "x":7.25, "y":3},
                {"label":"K38 (B3,C5)", "x":8.25, "y":3},
                {"label":"K39 (B3,C6)", "x":9.25, "y":3},
                {"label":"K3A (B3,C7)", "x":10.25, "y":3},
                {"label":"K3B (B3,D0)", "x":11.25, "y":3},
                {"label":"K3C (B3,D1)", "x":12.25, "y":3, "w":1.75},
                {"label":"K3D (B3,D2)", "x":14, "y":3},
                {"label":"K3E (B3,D3)", "x":15, "y":3},
                {"label":"K40 (B4,B5)", "x":0, "y":4, "w":1.25},
                {"label":"K41 (B4,B6)", "x":1.25, "y":4, "w":1.25},
                {"label":"K42 (B4,B7)", "x":2.5, "y":4, "w":1.25},
                {"label":"K46 (B4,C3)", "x":3.75, "y":4, "w":6.25},
                {"label":"K4A (B4,C7)", "x":10, "y":4, "w":1.25},
                {"label":"K4B (B4,D0)", "x":11.25, "y":4, "w":1.25},
                {"label":"K4C (B4,D1)", "x":13, "y":4},
                {"label":"K4D (B4,D2)", "x":14, "y":4},
                {"label":"K4E (B4,D3)", "x":15, "y":4}
            ]
        },
        "LAYOUT_65_iso_blocker": {
            "layout": [
                {"label":"K00 (B0,B5)", "x":0, "y":0},
                {"label":"K01 (B0,B6)", "x":1, "y":0},
                {"label":"K02 (B0,B7)", "x":2, "y":0},
                {"label":"K03 (B0,C0)", "x":3, "y":0},
                {"label":"K04 (B0,C1)", "x":4, "y":0},
                {"label":"K05 (B0,C2)", "x":5, "y":0},
                {"label":"K06 (B0,C3)", "x":6, "y":0},
                {"label":"K07 (B0,C4)", "x":7, "y":0},
                {"label":"K08 (B0,C5)", "x":8, "y":0},
                {"label":"K09 (B0,C6)", "x":9, "y":0},
                {"label":"K0A (B0,C7)", "x":10, "y":0},
                {"label":"K0B (B0,D0)", "x":11, "y":0},
                {"label":"K0C (B0,D1)", "x":12, "y":0},
                {"label":"K0D (B0,D2)", "x":13, "y":0, "w":2},
                {"label":"K0E (B0,D3)", "x":15, "y":0},
                {"label":"K10 (B1,B5)", "x":0, "y":1, "w":1.5},
                {"label":"K11 (B1,B6)", "x":1.5, "y":1},
                {"label":"K12 (B1,B7)", "x":2.5, "y":1},
                {"label":"K13 (B1,C0)", "x":3.5, "y":1},
                {"label":"K14 (B1,C1)", "x":4.5, "y":1},
                {"label":"K15 (B1,C2)", "x":5.5, "y":1},
                {"label":"K16 (B1,C3)", "x":6.5, "y":1},
                {"label":"K17 (B1,C4)", "x":7.5, "y":1},
                {"label":"K18 (B1,C5)", "x":8.5, "y":1},
                {"label":"K19 (B1,C6)", "x":9.5, "y":1},
                {"label":"K1A (B1,C7)", "x":10.5, "y":1},
                {"label":"K1B (B1,D0)", "x":11.5, "y":1},
                {"label":"K1C (B1,D1)", "x":12.5, "y":1},
                {"label":"K2D (B2,D2)", "x":13.75, "y":1, "w":1.25, "h":2},
                {"label":"K1E (B1,D3)", "x":15, "y":1},
                {"label":"K20 (B2,B5)", "x":0, "y":2, "w":1.75},
                {"label":"K21 (B2,B6)", "x":1.75, "y":2},
                {"label":"K22 (B2,B7)", "x":2.75, "y":2},
                {"label":"K23 (B2,C0)", "x":3.75, "y":2},
                {"label":"K24 (B2,C1)", "x":4.75, "y":2},
                {"label":"K25 (B2,C2)", "x":5.75, "y":2},
                {"label":"K26 (B2,C3)", "x":6.75, "y":2},
                {"label":"K27 (B2,C4)", "x":7.75, "y":2},
                {"label":"K28 (B2,C5)", "x":8.75, "y":2},
                {"label":"K29 (B2,C6)", "x":9.75, "y":2},
                {"label":"K2A (B2,C7)", "x":10.75, "y":2},
                {"label":"K2B (B2,D0)", "x":11.75, "y":2},
                {"label":"K2C (B2,D1)", "x":12.75, "y":2},
                {"label":"K2E (B2,D3)", "x":15, "y":2},
                {"label":"K30 (B3,B5)", "x":0, "y":3, "w":1.25},
                {"label":"K31 (B3,B6)", "x":1.25, "y":3},
                {"label":"K32 (B3,B7)", "x":2.25, "y":3},
                {"label":"K33 (B3,C0)", "x":3.25, "y":3},
                {"label":"K34 (B3,C1)", "x":4.25, "y":3},
                {"label":"K35 (B3,C2)", "x":5.25, "y":3},
                {"label":"K36 (B3,C3)", "x":6.25, "y":3},
                {"label":"K37 (B3,C4)", "x":7.25, "y":3},
                {"label":"K38 (B3,C5)", "x":8.25, "y":3},
                {"label":"K39 (B3,C6)", "x":9.25, "y":3},
                {"label":"K3A (B3,C7)", "x":10.25, "y":3},
                {"label":"K3B (B3,D0)", "x":11.25, "y":3},
                {"label":"K3C (B3,D1)", "x":12.25, "y":3, "w":1.75},
                {"label":"K3D (B3,D2)", "x":14, "y":3},
                {"label":"K3E (B3,D3)", "x":15, "y":3},
                {"label":"K40 (B4,B5)", "x":0, "y":4, "w":1.25},
                {"label":"K41 (B4,B6)", "x":1.25, "y":4, "w":1.25},
                {"label":"K42 (B4,B7)", "x":2.5, "y":4, "w":1.25},
                {"label":"K46 (B4,C3)", "x":3.75, "y":4, "w":6.25},
                {"label":"K4A (B4,C7)", "x":10, "y":4, "w":1.25},
                {"label":"K4B (B4,D0)", "x":11.25, "y":4, "w":1.25},
                {"label":"K4C (B4,D1)", "x":13, "y":4},
                {"label":"K4D (B4,D2)", "x":14, "y":4},
                {"label":"K4E (B4,D3)", "x":15, "y":4}
            ]
        }
    }
 }
@@ -0,0 +1,29 @@
 /* Copyright 2020 Team Mechlovin
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    [0] = LAYOUT_all(
        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,  KC_HOME,
        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_END,
        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
    ),
 };
@@ -0,0 +1 @@
 # The default keymap for hannah65
@@ -0,0 +1,50 @@
 /* Copyright 2020 Team Mechlovin
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    [0] = LAYOUT_all(
        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_DEL,  KC_HOME,
        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,          KC_UP,   KC_END,
        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RCTL,          KC_LEFT, KC_DOWN, KC_RGHT
    ),
    [1] = LAYOUT_all(
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS
    ),
    [2] = LAYOUT_all(
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS
    ),
    [3] = LAYOUT_all(
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                   KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS
    ),
 };
@@ -0,0 +1 @@
 VIA_ENABLE = yes
@@ -0,0 +1,61 @@
 /* Copyright 2020 Team Mechlovin
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "quantum.h"
 #define LAYOUT_all( \
    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K1D, K0E,   \
    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C,      K1E,   \
    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,           K2D, K2E,   \
    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,      K3D, K3E,   \
    K40, K41, K42,                K46,                K4A, K4B,      K4C, K4D, K4E    \
 ) { \
    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E   }, \
    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,   K1E   }, \
    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   K2E   }, \
    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, K4A,   K4B,   K4C,   K4D,   K4E   }, \
 }
 #define LAYOUT_65_ansi_blocker( \
    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,   \
    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E,   \
    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D,      K2E,   \
    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,   \
    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D, K4E    \
 ) { \
    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E   }, \
    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   KC_NO, K1E   }, \
    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   K2E   }, \
    { K30,   KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, K4A,   K4B,   K4C,   K4D,   K4E   }, \
 }
 #define LAYOUT_65_iso_blocker( \
    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,   \
    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2D, K1E,   \
    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,      K2E,   \
    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E,   \
    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D, K4E    \
 ) { \
    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E   }, \
    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   KC_NO, K1E   }, \
    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   K2E   }, \
    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E   }, \
    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, KC_NO, K4A,   K4B,   K4C,   K4D,   K4E   }, \
 }
@@ -0,0 +1,21 @@
 # MCU name
 MCU = STM32F303
 # Build Options
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 DEFAULT_FOLDER = mechlovin/hannah65/rev1
@@ -110,9 +110,9 @@ extern LED_TYPE fleds[2];
 hs_set fled_hs[2];
 void copyrgb(LED_TYPE *src, LED_TYPE *dst) {
-  (*dst).r = (*src).r;
+  dst->r = src->r;
-  (*dst).g = (*src).g;
+  dst->g = src->g;
-  (*dst).b = (*src).b;
+  dst->b = src->b;
 }
 void rgblight_set_clipping_range(uint8_t start_pos, uint8_t num_leds) {
@@ -145,11 +145,11 @@ void sethsv_raw(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) {
 void sethsv(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { sethsv_raw(hue, sat, val > RGBLIGHT_LIMIT_VAL ? RGBLIGHT_LIMIT_VAL : val, led1); }
 void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1) {
-    (*led1).r = r;
+    led1->r = r;
-    (*led1).g = g;
+    led1->g = g;
-    (*led1).b = b;
+    led1->b = b;
 #ifdef RGBW
-    (*led1).w = 0;
+    led1->w = 0;
 #endif
 }
@@ -0,0 +1,141 @@
 /*
 Copyright 2020 Evy Dekkers
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "canoe_gen2.h"
 void keyboard_pre_init_kb(void) {
  setPinOutput(E6);
  writePinHigh(E6);
 }
 bool led_update_kb(led_t led_state) {
    if(led_update_user(led_state)) {
        writePin(E6, !led_state.caps_lock);
    }
    return true;
 }
 #ifdef RGB_MATRIX_ENABLE
 void suspend_power_down_kb(void) {
    rgb_matrix_set_suspend_state(true);
    suspend_power_down_user();
 }
 void suspend_wakeup_init_kb(void) {
    rgb_matrix_set_suspend_state(false);
    suspend_wakeup_init_user();
 }
 led_config_t g_led_config = { {
    // Key Matrix to LED Index
    // 15, 44, 46, 48,
    // 74, 75, 76
    {  0,  1,  2,  3,      4,      5,      6,  7,      8,      9, 10, 11, 12,     14, 16 },
    { 17, 18, 19, 20,     21,     22,     23, 24,     25,     26, 27, 28, 29,     13, 31 },
    { 32, 33, 34, 35,     36,     37,     38, 39,     40,     41, 42, 43, 30,     45, 47 },
    { 49, 50, 51, 52,     53,     54,     55, 56,     57,     58, 59, 60, 61,     62, 63 },
    { 64, 65, 66, NO_LED, NO_LED, NO_LED, 67, NO_LED, NO_LED, 69, 70, NO_LED, 71, 72, 73 }
 }, {
    // LED Index to Physical Position
    { 7, 8 },    // Esc
    { 22,  8 },  // 1
    { 37,  8 },  // 2
    { 52,  8 },  // 3
    { 67,  8 },  // 4
    { 82,  8 },  // 5
    { 97,  8 },  // 6
    { 112,  8 }, // 7
    { 127,  8 }, // 8
    { 142,  8 }, // 9
    { 157,  8 }, // 0
    { 172,  8 }, // -
    { 187,  8 }, // =
    { 202,  8 }, // split bs
    { 209,  8 }, // bs
    { 217,  8 }, // split bs
    { 231,  8 }, // ins
    { 11, 24 },   // tab
    { 30,  24 },  // q
    { 45,  24 },  // w
    { 60,  24 },  // e
    { 75,  24 },  // r
    { 90,  24 },  // t
    { 104,  24 }, // y
    { 119,  24 }, // u
    { 134,  24 }, // i
    { 149,  24 }, // o
    { 164,  24 }, // p
    { 179,  24 }, // [
    { 194,  24 }, // ]
    { 212,  24 }, // backslash
    { 231,  24 }, // del
    { 11, 40 },   // caps
    { 34,  40 },  // a
    { 49,  40 },  // s
    { 64,  40 },  // d
    { 79,  40 },  // f
    { 94,  40 },  // g
    { 108,  40 }, // h
    { 123,  40 }, // j
    { 138,  40 }, // k
    { 153,  40 }, // l
    { 168,  40 }, // ;
    { 183,  40 }, // '
    { 198,  40 }, // iso hash
    { 200,  40 }, // ansi enter
    { 215,  32 }, // iso enter
    { 231,  40 }, // pgup
    { 9, 56 },    // iso shift
    { 17,  56 },  // ansi shift
    { 26,  56 },  // iso nubs
    { 41,  56 },  // z
    { 56,  56 },  // x
    { 71,  56 },  // c
    { 86,  56 },  // v
    { 101,  56 }, // b
    { 116,  56 }, // n
    { 131,  56 }, // m
    { 146,  56 }, // ,
    { 161,  56 }, // .
    { 175,  56 }, // ?
    { 196,  56 }, // shift
    { 217,  56 }, // up
    { 231,  56 }, // pgdn
    { 10, 72 },   // ctrl
    { 29,  72 },  // win
    { 48,  72 },  // alt
    { 103,  72 }, // space
    { 112,  72 }, // space
    { 161,  72 }, // alt
    { 176,  72 }, // fn
    { 202,  72 }, // left
    { 217,  72 }, // down
    { 231,  72 }, // right
    { 7,  40 },   // top 1
    { 119,  40 }, // top 2
    { 231,  40 }  // top 3
 }, {
    // LED Index to Flag
    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1,
    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1,
    1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1,
    1, 1, 1, 4, 4, 1, 1, 1, 1, 1,
    2, 2, 2
 } };
 #endif
@@ -0,0 +1,54 @@
 /*
 Copyright 2020 Evy Dekkers
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "quantum.h"
 // readability
 #define ___ KC_NO
 #define LAYOUT_all LAYOUT_65_iso_blocker_split_bs
 #define LAYOUT_65_ansi_blocker_split_bs( \
    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k1d, k0d, k0e, \
    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2c,      k1e, \
    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d,           k2e, \
    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d,      k3e, \
    k40, k41, k42,                k46,                k49, k4a,      k4c, k4d, k4e  \
 ) \
 { \
    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e}, \
    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e}, \
    {k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e}, \
    {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, k4a, ___, k4c, k4d, k4e}  \
 }
 #define LAYOUT_65_iso_blocker_split_bs( \
    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k1d, k0d, k0e, \
    k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,           k1e, \
    k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      k2e, \
    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d,      k3e, \
    k40, k41, k42,                k46,                k49, k4a,      k4c, k4d, k4e  \
 ) \
 { \
    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
    {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e}, \
    {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e}, \
    {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e}, \
    {k40, k41, k42, ___, ___, ___, k46, ___, ___, k49, k4a, ___, k4c, k4d, k4e}  \
 }
@@ -0,0 +1,67 @@
 /*
 Copyright 2020 Evy Dekkers
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #pragma once
 #include "config_common.h"
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0x9C12
 #define PRODUCT_ID      0x89F0
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    Percent Studio
 #define PRODUCT         Canoe Gen2
 /* key matrix size */
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 15
 // ROWS: Top to bottom, COLS: Left to right
 #define MATRIX_ROW_PINS {B1,B3,B2,F5,F4}
 #define MATRIX_COL_PINS {B0,D0,C6,B6,B5,B4,D7,D6,D4,D5,D3,D2,D1,F6,F7}
 #define UNUSED_PINS
 /* Uncomment if your encoder doesn't react to every turn or skips */
 //#define ENCODER_RESOLUTION 2
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 /* Backlight configuration
 */
 #define RGB_DI_PIN B7
 #define DRIVER_LED_TOTAL 77
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
 #define RGB_MATRIX_STARTUP_HUE 0
 #define RGB_MATRIX_STARTUP_SAT 255
 #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #define RGB_MATRIX_STARTUP_SPD 127
 #define RGB_DISABLE_WHEN_USB_SUSPENDED true
@@ -0,0 +1,162 @@
 {
    "keyboard_name": "Canoe Gen2", 
    "url": "", 
    "maintainer": "evyd13", 
    "width": 16, 
    "height": 5, 
    "layouts": {
        "LAYOUT_65_ansi_blocker_split_bs": {
            "layout": [
                {"x":0, "y":0},
                {"x":1, "y":0},
                {"x":2, "y":0},
                {"x":3, "y":0},
                {"x":4, "y":0},
                {"x":5, "y":0},
                {"x":6, "y":0},
                {"x":7, "y":0},
                {"x":8, "y":0},
                {"x":9, "y":0},
                {"x":10, "y":0},
                {"x":11, "y":0},
                {"x":12, "y":0},
                {"x":13, "y":0},
                {"x":14, "y":0},
                {"x":15, "y":0},
                {"x":0, "y":1, "w":1.5},
                {"x":1.5, "y":1},
                {"x":2.5, "y":1},
                {"x":3.5, "y":1},
                {"x":4.5, "y":1},
                {"x":5.5, "y":1},
                {"x":6.5, "y":1},
                {"x":7.5, "y":1},
                {"x":8.5, "y":1},
                {"x":9.5, "y":1},
                {"x":10.5, "y":1},
                {"x":11.5, "y":1},
                {"x":12.5, "y":1},
                {"x":13.5, "y":1, "w":1.5},
                {"x":15, "y":1},
                {"x":0, "y":2, "w":1.75},
                {"x":1.75, "y":2},
                {"x":2.75, "y":2},
                {"x":3.75, "y":2},
                {"x":4.75, "y":2},
                {"x":5.75, "y":2},
                {"x":6.75, "y":2},
                {"x":7.75, "y":2},
                {"x":8.75, "y":2},
                {"x":9.75, "y":2},
                {"x":10.75, "y":2},
                {"x":11.75, "y":2},
                {"x":12.75, "y":2, "w":2.25},
                {"x":15, "y":2},
                {"x":0, "y":3, "w":2.25},
                {"x":2.25, "y":3},
                {"x":3.25, "y":3},
                {"x":4.25, "y":3},
                {"x":5.25, "y":3},
                {"x":6.25, "y":3},
                {"x":7.25, "y":3},
                {"x":8.25, "y":3},
                {"x":9.25, "y":3},
                {"x":10.25, "y":3},
                {"x":11.25, "y":3},
                {"x":12.25, "y":3, "w":1.75},
                {"x":14, "y":3},
                {"x":15, "y":3},
                {"x":0, "y":4, "w":1.25},
                {"x":1.25, "y":4, "w":1.25},
                {"x":2.5, "y":4, "w":1.25},
                {"x":3.75, "y":4, "w":6.25},
                {"x":10, "y":4, "w":1.25},
                {"x":11.25, "y":4, "w":1.25},
                {"x":13, "y":4},
                {"x":14, "y":4},
                {"x":15, "y":4}
            ]
        },
        "LAYOUT_65_iso_blocker_split_bs": {
            "layout": [
                {"x":0, "y":0},
                {"x":1, "y":0},
                {"x":2, "y":0},
                {"x":3, "y":0},
                {"x":4, "y":0},
                {"x":5, "y":0},
                {"x":6, "y":0},
                {"x":7, "y":0},
                {"x":8, "y":0},
                {"x":9, "y":0},
                {"x":10, "y":0},
                {"x":11, "y":0},
                {"x":12, "y":0},
                {"x":13, "y":0},
                {"x":14, "y":0},
                {"x":15, "y":0},
                {"x":0, "y":1, "w":1.5},
                {"x":1.5, "y":1},
                {"x":2.5, "y":1},
                {"x":3.5, "y":1},
                {"x":4.5, "y":1},
                {"x":5.5, "y":1},
                {"x":6.5, "y":1},
                {"x":7.5, "y":1},
                {"x":8.5, "y":1},
                {"x":9.5, "y":1},
                {"x":10.5, "y":1},
                {"x":11.5, "y":1},
                {"x":12.5, "y":1},
                {"x":15, "y":1},
                {"x":0, "y":2, "w":1.75},
                {"x":1.75, "y":2},
                {"x":2.75, "y":2},
                {"x":3.75, "y":2},
                {"x":4.75, "y":2},
                {"x":5.75, "y":2},
                {"x":6.75, "y":2},
                {"x":7.75, "y":2},
                {"x":8.75, "y":2},
                {"x":9.75, "y":2},
                {"x":10.75, "y":2},
                {"x":11.75, "y":2},
                {"x":12.75, "y":2},
                {"x":13.75, "y":1, "w":1.25, "h":2},
                {"x":15, "y":2},
                {"x":0, "y":3, "w":1.25},
                {"x":1.25, "y":3},
                {"x":2.25, "y":3},
                {"x":3.25, "y":3},
                {"x":4.25, "y":3},
                {"x":5.25, "y":3},
                {"x":6.25, "y":3},
                {"x":7.25, "y":3},
                {"x":8.25, "y":3},
                {"x":9.25, "y":3},
                {"x":10.25, "y":3},
                {"x":11.25, "y":3},
                {"x":12.25, "y":3, "w":1.75},
                {"x":14, "y":3},
                {"x":15, "y":3},
                {"x":0, "y":4, "w":1.25},
                {"x":1.25, "y":4, "w":1.25},
                {"x":2.5, "y":4, "w":1.25},
                {"x":3.75, "y":4, "w":6.25},
                {"x":10, "y":4, "w":1.25},
                {"x":11.25, "y":4, "w":1.25},
                {"x":13, "y":4},
                {"x":14, "y":4},
                {"x":15, "y":4}
            ]
        }
    }
 }
@@ -0,0 +1,36 @@
 /*
 Copyright 2020 Evy Dekkers
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [0] = LAYOUT_65_ansi_blocker_split_bs(
  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,   KC_9,     KC_0,    KC_MINS, KC_EQL,   KC_BSLS, KC_BSPC, KC_INS,
  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,   KC_O,     KC_P,    KC_LBRC, KC_RBRC,  KC_BSLS,          KC_DEL,
  KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,   KC_L,     KC_SCLN, KC_QUOT,           KC_ENT,           KC_PGUP,
  KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,   KC_COMM,  KC_DOT,  KC_SLSH, KC_RSFT,  KC_UP,            KC_PGDN,
  KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),             KC_LEFT, KC_DOWN, KC_RGHT),
 [1] = LAYOUT_65_ansi_blocker_split_bs(
  KC_TILD, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,   _______, _______, _______,
  RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,          _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,           _______,          _______,
  _______,          RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______,  _______,          _______,
  _______, _______, _______,                            _______,                            RGB_MOD, _______,           _______, _______, _______),
 };
@@ -0,0 +1,50 @@
 /*
 Copyright 2020 Evy Dekkers
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include QMK_KEYBOARD_H
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [0] = LAYOUT_all(
  KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,   KC_9,     KC_0,    KC_MINS, KC_EQL,   KC_BSLS, KC_BSPC, KC_INS,
  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,   KC_O,     KC_P,    KC_LBRC, KC_RBRC,                    KC_DEL,
  KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,   KC_L,     KC_SCLN, KC_QUOT, KC_BSLS,  KC_ENT,           KC_PGUP,
  KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,   KC_COMM,  KC_DOT,  KC_SLSH, KC_RSFT,  KC_UP,            KC_PGDN,
  KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),             KC_LEFT, KC_DOWN, KC_RGHT),
 [1] = LAYOUT_all(
  KC_TILD, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,   _______, _______, _______,
  RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                    _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,          _______,
  _______, _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______,  _______,          _______,
  _______, _______, _______,                            _______,                            _______, _______,           _______, _______, _______),
 [2] = LAYOUT_all(
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                    _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,          _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,          _______,
  _______, _______, _______,                            _______,                            _______, _______,           _______, _______, _______),
 [3] = LAYOUT_all(
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                    _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,          _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,          _______,
  _______, _______, _______,                            _______,                            _______, _______,           _______, _______, _______),
 };
@@ -0,0 +1 @@
 VIA_ENABLE = yes
@@ -0,0 +1,17 @@
 # Canoe Gen2
 Canoe Gen2 is a 65% from Percent with per key RGB and an adjustable foot angle. The PCB can be put into reset mode by pressing the button on the back.
 * Keyboard Maintainer: [Evyd13](https://github.com/evyd13)
 * Hardware Supported: (Black) Canoe Gen2 PCB
 * Hardware Availability: https://percent.studio/products/canoe-gen2
 Make example for this keyboard (after setting up your build environment):
    make percent/canoe_gen2:default
 Flashing example for this keyboard:
    make percent/canoe_gen2:default:flash
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -0,0 +1,65 @@
 /*
 Copyright 2020 Evy Dekkers
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 RGB_MATRIX_EFFECT(indicator_gradient)
 RGB_MATRIX_EFFECT(indicator_cycle_all)
 RGB_MATRIX_EFFECT(indicator_static)
 #ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS
 static bool indicator_static(effect_params_t* params) {
    RGB_MATRIX_USE_LIMITS(led_min, led_max);
    for (uint8_t i = led_min ; i < 74; i++) {
        rgb_matrix_set_color(i, 0x00, 0x00, 0x00);
    }
    for (uint8_t i = 74 ; i < led_max; i++) {
        rgb_matrix_set_color(i, 0xff, 0xff, 0xff);
    }
    return led_max < DRIVER_LED_TOTAL;
 }
 bool effect_runner_indicator(effect_params_t* params, i_f effect_func) {
    RGB_MATRIX_USE_LIMITS(led_min, led_max);
    uint8_t time = scale16by8(g_rgb_timer, rgb_matrix_config.speed / 16);
    for (uint8_t i = led_min; i < led_max; i++) {
        if (i < 74) {
            rgb_matrix_set_color(i, 0x00, 0x00, 0x00);
        } else {
            RGB_MATRIX_TEST_LED_FLAGS();
            RGB rgb = hsv_to_rgb(effect_func(rgb_matrix_config.hsv, (i - 74), time));
            rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b);
        }
    }
    return led_max < DRIVER_LED_TOTAL;
 }
 static HSV indicator_gradient_math(HSV hsv, uint8_t i, uint8_t time) {
    hsv.h = g_led_config.point[i].x - time;
    return hsv;
 }
 bool indicator_gradient(effect_params_t* params) { return effect_runner_indicator(params, &indicator_gradient_math); }
 static HSV indicator_cycle_all_math(HSV hsv, uint8_t i, uint8_t time) {
    hsv.h = time;
    return hsv;
 }
 bool indicator_cycle_all(effect_params_t* params) { return effect_runner_indicator(params, &indicator_cycle_all_math); }
 #endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS
@@ -0,0 +1,26 @@
 # MCU name
 MCU = atmega32u4
 # Bootloader selection
 BOOTLOADER = atmel-dfu
 # Build Options
 #   change yes to no to disable
 #
 BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = no        # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = yes        # Console for debug
 COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
 RGB_MATRIX_ENABLE = WS2812
 LAYOUTS = 65_ansi_blocker_split_bs 65_iso_blocker_split_bs
 RGB_MATRIX_CUSTOM_KB = yes
@@ -150,25 +150,58 @@ def check_udev_rules():
    ok = True
    udev_dir = Path("/etc/udev/rules.d/")
    desired_rules = {
-        'dfu': {_udev_rule("03eb", "2ff4"), _udev_rule("03eb", "2ffb"), _udev_rule("03eb", "2ff0")},
+        'atmel-dfu': {
-        'input_club': {_udev_rule("1c11", "b007")},
+            _udev_rule("03EB", "2FEF"),  # ATmega16U2
-        'stm32': {_udev_rule("1eaf", "0003"), _udev_rule("0483", "df11")},
+            _udev_rule("03EB", "2FF0"),  # ATmega32U2
-        'bootloadhid': {_udev_rule("16c0", "05df")},
+            _udev_rule("03EB", "2FF3"),  # ATmega16U4
            _udev_rule("03EB", "2FF4"),  # ATmega32U4
            _udev_rule("03EB", "2FF9"),  # AT90USB64
            _udev_rule("03EB", "2FFB")   # AT90USB128
        },
        'kiibohd': {
            _udev_rule("1C11", "B007")
        },
        'stm32': {
            _udev_rule("1EAF", "0003"),  # STM32duino
            _udev_rule("0483", "DF11")   # STM32 DFU
        },
        'bootloadhid': {
            _udev_rule("16C0", "05DF")
        },
        'usbasploader': {
            _udev_rule("16C0", "05DC")
        },
        'massdrop': {
            _udev_rule("03EB", "6124")
        },
        'caterina': {
-            _udev_rule("2341", "0036", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),
+            # Spark Fun Electronics
-            _udev_rule("1b4f", "9205", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),
+            _udev_rule("1B4F", "9203", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),  # Pro Micro 3V3/8MHz
-            _udev_rule("1b4f", "9203", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),
+            _udev_rule("1B4F", "9205", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),  # Pro Micro 5V/16MHz
-            _udev_rule("2a03", "0036", 'ENV{ID_MM_DEVICE_IGNORE}="1"')
+            _udev_rule("1B4F", "9207", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),  # LilyPad 3V3/8MHz (and some Pro Micro clones)
            # Pololu Electronics
            _udev_rule("1FFB", "0101", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),  # A-Star 32U4
            # Arduino SA
            _udev_rule("2341", "0036", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),  # Leonardo
            _udev_rule("2341", "0037", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),  # Micro
            # Adafruit Industries LLC
            _udev_rule("239A", "000C", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),  # Feather 32U4
            _udev_rule("239A", "000D", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),  # ItsyBitsy 32U4 3V3/8MHz
            _udev_rule("239A", "000E", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),  # ItsyBitsy 32U4 5V/16MHz
            # dog hunter AG
            _udev_rule("2A03", "0036", 'ENV{ID_MM_DEVICE_IGNORE}="1"'),  # Leonardo
            _udev_rule("2A03", "0037", 'ENV{ID_MM_DEVICE_IGNORE}="1"')   # Micro
        }
    }
    # These rules are no longer recommended, only use them to check for their presence.
    deprecated_rules = {
-        'dfu': {_deprecated_udev_rule("03eb", "2ff4"), _deprecated_udev_rule("03eb", "2ffb"), _deprecated_udev_rule("03eb", "2ff0")},
+        'atmel-dfu': {_deprecated_udev_rule("03eb", "2ff4"), _deprecated_udev_rule("03eb", "2ffb"), _deprecated_udev_rule("03eb", "2ff0")},
-        'input_club': {_deprecated_udev_rule("1c11")},
+        'kiibohd': {_deprecated_udev_rule("1c11")},
        'stm32': {_deprecated_udev_rule("1eaf", "0003"), _deprecated_udev_rule("0483", "df11")},
        'bootloadhid': {_deprecated_udev_rule("16c0", "05df")},
-        'caterina': {'ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"', 'ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"'}
+        'caterina': {'ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"', 'ATTRS{idVendor}=="2341", ENV{ID_MM_DEVICE_IGNORE}="1"'},
        'tmk': {_deprecated_udev_rule("feed")}
    }
    if udev_dir.exists():
@@ -194,7 +227,7 @@ def check_udev_rules():
                if deprecated_rule and deprecated_rule.issubset(current_rules):
                    cli.log.warn("{bg_yellow}Found old, deprecated udev rules for '%s' boards. The new rules on https://docs.qmk.fm/#/faq_build?id=linux-udev-rules offer better security with the same functionality.", bootloader)
                else:
-                    cli.log.warn("{bg_yellow}Missing udev rules for '%s' boards. You'll need to use `sudo` in order to flash them.", bootloader)
+                    cli.log.warn("{bg_yellow}Missing udev rules for '%s' boards. See https://docs.qmk.fm/#/faq_build?id=linux-udev-rules for more details.", bootloader)
    return ok
@@ -10,6 +10,6 @@ MAX_KEYBOARD_SUBFOLDERS = 5
 # Supported processor types
 ARM_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411'
-AVR_PROCESSORS = 'at90usb1286', 'at90usb646', 'atmega16u2', 'atmega328p', 'atmega32a', 'atmega32u2', 'atmega32u4', None
+AVR_PROCESSORS = 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', 'atmega328p', 'atmega32a', None
 ALL_PROCESSORS = ARM_PROCESSORS + AVR_PROCESSORS
 VUSB_PROCESSORS = 'atmega328p', 'atmega32a', 'atmega328', 'attiny85'
@@ -44,7 +44,7 @@
 #        define PINB_ADDRESS 0x3
 #        define PINC_ADDRESS 0x6
 #        define PIND_ADDRESS 0x9
-#    elif defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__)
+#    elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
 #        define ADDRESS_BASE 0x00
 #        define PINA_ADDRESS 0x0
 #        define PINB_ADDRESS 0x3
@@ -307,7 +307,7 @@
                UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
                sei();                              \
            } while (0)
-#    elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
+#    elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
 #        define SERIAL_UART_BAUD 115200
 #        define SERIAL_UART_DATA UDR1
 /* UBRR should result in ~16 and set UCSR1A = _BV(U2X1) as per rn42 documentation. HC05 needs baudrate configured accordingly */
@@ -40,6 +40,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #if defined(PROTOCOL_CHIBIOS)
 #    define RESET QK_RESET
 #endif
 // Gross hack, remove me and change RESET keycode to QK_BOOT
 #if defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__)
 #    undef RESET
 #endif
 #include "quantum_keycodes.h"
@@ -280,7 +280,7 @@ ifneq ($(findstring STM32F411, $(MCU)),)
  DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
 endif
-ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb1286))
+ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287))
  PROTOCOL = LUFA
  # Processor frequency.
@@ -132,11 +132,11 @@ void sethsv_raw(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) {
 void sethsv(uint8_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { sethsv_raw(hue, sat, val > RGBLIGHT_LIMIT_VAL ? RGBLIGHT_LIMIT_VAL : val, led1); }
 void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1) {
-    (*led1).r = r;
+    led1->r = r;
-    (*led1).g = g;
+    led1->g = g;
-    (*led1).b = b;
+    led1->b = b;
 #ifdef RGBW
-    (*led1).w = 0;
+    led1->w = 0;
 #endif
 }
Author	SHA1	Message	Date
Ryan	e7acd39b78	Consolidate udev rules into a single file (#9693 ) * Consolidate udev rules into a single file * Update rules in doctor.py * Simplify doctor rule checking * Fix errors * Add TMK "FEED" VID to list of deprecated udev rules * A comma would be nice * Split rules back up into bootloaders * Link to docs page in "missing" case * Add Pololu VID * Be more specific about Caterina devices, and add LilyPad PID	2020-09-27 20:36:33 +10:00
Ryan	70fce6564f	Add logic for AT90USBxx7 where needed (#10203 )	2020-09-27 20:33:03 +10:00
preconditionandridingqwerty	28ff51175b	[Docs] Wording & formatting changes in the Tapping Force Hold section of the Tap Hold page + removed trailing whitespaces (#10391 ) * Wording & formatting changes in Tapping Force Hold The Permissive Hold and the Ignore Mod Tap Interrupt sections were also modified to remove the quotes around "tapping". * Removed all trailing whitespaces from tap hold doc * "it's simply really:" → "it's simple really:" * "This allows to keep the ability" → "This allows keeping the ability" Used the gerund form of "to keep" in the Tapping Force Hold section of the Tap Hold docs. Co-authored-by: ridingqwerty <[email protected]> Co-authored-by: ridingqwerty <[email protected]>	2020-09-26 19:11:40 -04:00
Ryan	c16ee22784	`setrgb()`: Use arrow operator (#10451 )	2020-09-26 19:42:40 +01:00
Evy Dekkers	1b7101f065	[Keyboard] add Percent Canoe Gen2 (#10344 ) * Add Canoe Gen2 * Fix info.json * Update info.json * Changes * Move canoegen2 to canoe_gen2 * Update canoe_gen2.h	2020-09-25 22:39:14 -07:00
mechlovin	c4cc697aef	[Keyboard] add hannah65 by Team Mechlovin (#10284 ) * add hannah65 * add iso layout, ansi layout * Update readme.md * add mechlovin9 * update * update * update * Update keyboards/mechlovin/hannah65/mechlovin9/info.json * Update keyboards/mechlovin/hannah65/mechlovin9/info.json * Update keyboards/mechlovin/hannah65/mechlovin9/readme.md * Update keyboards/mechlovin/hannah65/readme.md * Update keyboards/mechlovin/hannah65/rev1/info.json * Update keyboards/mechlovin/hannah65/rev1/info.json * Update keyboards/mechlovin/hannah65/rev1/rev1.h * Update keyboards/mechlovin/hannah65/rev1/rev1.h * Update keyboards/mechlovin/hannah65/mechlovin9/info.json * update * Update keyboards/mechlovin/hannah65/mechlovin9/info.json * Update keyboards/mechlovin/hannah65/mechlovin9/info.json	2020-09-25 22:33:49 -07:00
fauxpark	a0305f5e7e	Be more specific about Caterina devices, and add LilyPad PID	2020-09-19 05:40:25 +10:00
fauxpark	c2a0cebf8b	Add Pololu VID	2020-09-19 05:21:33 +10:00
fauxpark	ef1b050b32	Link to docs page in "missing" case	2020-09-19 05:21:32 +10:00
fauxpark	4bee445c2f	Split rules back up into bootloaders	2020-09-19 05:21:32 +10:00
fauxpark	7921c5d9b8	A comma would be nice	2020-09-19 05:21:31 +10:00
fauxpark	72b1ff5899	Add TMK "FEED" VID to list of deprecated udev rules	2020-09-19 05:21:31 +10:00
fauxpark	eee6dd3544	Fix errors	2020-09-19 05:21:31 +10:00
fauxpark	510138f525	Simplify doctor rule checking	2020-09-19 05:21:30 +10:00
fauxpark	07e37c857c	Update rules in doctor.py	2020-09-19 05:21:30 +10:00
fauxpark	a21e487fbc	Consolidate udev rules into a single file	2020-09-19 05:21:29 +10:00