Most ergodox keymaps compiles on Infinity

There are linker errors due to missing led funcitonality though

keyboards/ergodox/ergodox.c

@@ -1,8 +0,0 @@
-/*
- * ergodox.c
- *
- *  Created on: 7 jul 2016
- *      Author: Fred Wales
- */
-
-

keyboards/ergodox/ergodox.h

@@ -1,6 +1,5 @@
 #ifndef KEYBOARDS_ERGODOX_ERGODOX_H_
 #define KEYBOARDS_ERGODOX_ERGODOX_H_
-
 #ifdef SUBPROJECT_ez
     #include "ez.h"
 #endif

keyboards/ergodox/infinity/Makefile

@@ -52,14 +52,14 @@ ARMV = 7
 # Vector table for application
 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x00002000
+OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
 
 # Build Options
 #   comment out to disable the options.
 #
 CUSTOM_MATRIX ?= yes # Custom matrix file
 SERIAL_LINK_ENABLE = yes
-VISUALIZER_ENABLE ?= yes
+VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
 LCD_ENABLE ?= yes
 LED_ENABLE ?= yes
 LCD_BACKLIGHT_ENABLE ?= yes

keyboards/ergodox/infinity/infinity.c

@@ -1,8 +1,10 @@
-#include "infinity_ergodox.h"
+#include "infinity.h"
 #include "ch.h"
 #include "hal.h"
 #include "serial_link/system/serial_link.h"
+#ifdef VISUALIZER_ENABLE
 #include "lcd_backlight.h"
+#endif
 
 void init_serial_link_hal(void) {
     PORTA->PCR[1] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(2);
@@ -36,7 +38,7 @@ void init_serial_link_hal(void) {
 // Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced
 // Which will reduce the brightness range
 #define PRESCALAR_DEFINE 0
-
+#ifdef VISUALIZER_ENABLE
 void lcd_backlight_hal_init(void) {
 	// Setup Backlight
     SIM->SCGC6 |= SIM_SCGC6_FTM0;
@@ -74,3 +76,18 @@ void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) {
 	CHANNEL_GREEN.CnV = g;
 	CHANNEL_BLUE.CnV = b;
 }
+#endif
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}

keyboards/ergodox/infinity/infinity.h

@@ -21,24 +21,24 @@
     B04,          \
     B14, B24, B34 \
 ) { \
-    { KC_NO,    KC_NO,    KC_NO,    KC_##A03, KC_##A04 }, \
+    { KC_NO, KC_NO, KC_NO, A03,   A04 }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_##A13, KC_##A14 }, \
+    { KC_NO, KC_NO, KC_NO, A13,   A14 }, \
-    { KC_##A20, KC_##A21, KC_NO,    KC_##A23, KC_##A24 }, \
+    { A20,   A21,   KC_NO, A23,   A24 }, \
-    { KC_##A30, KC_##A31, KC_##A32, KC_##A33, KC_##A34 }, \
+    { A30,   A31,   A32,   A33,   A34 }, \
-    { KC_##A40, KC_##A41, KC_##A42, KC_##A43, KC_##A44 }, \
+    { A40,   A41,   A42,   A43,   A44 }, \
-    { KC_##A50, KC_##A51, KC_##A52, KC_##A53, KC_##A54 }, \
+    { A50,   A51,   A52,   A53,   A54 }, \
-    { KC_##A60, KC_##A61, KC_##A62, KC_##A63, KC_##A64 }, \
+    { A60,   A61,   A62,   A63,   A64 }, \
-    { KC_##A70, KC_##A71, KC_##A72, KC_##A73, KC_##A74 }, \
+    { A70,   A71,   A72,   A73,   A74 }, \
-    { KC_##A80, KC_##A81, KC_##A82, KC_##A83, KC_##A84 }, \
+    { A80,   A81,   A82,   A83,   A84 }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_##B03, KC_##B04 }, \
+    { KC_NO, KC_NO, KC_NO, B03,   B04 }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_##B13, KC_##B14 }, \
+    { KC_NO, KC_NO, KC_NO, B13,   B14 }, \
-    { KC_##B20, KC_##B21, KC_NO,    KC_##B23, KC_##B24 }, \
+    { B20,   B21,   KC_NO, B23,   B24 }, \
-    { KC_##B30, KC_##B31, KC_##B32, KC_##B33, KC_##B34 }, \
+    { B30,   B31,   B32,   B33,   B34 }, \
-    { KC_##B40, KC_##B41, KC_##B42, KC_##B43, KC_##B44 }, \
+    { B40,   B41,   B42,   B43,   B44 }, \
-    { KC_##B50, KC_##B51, KC_##B52, KC_##B53, KC_##B54 }, \
+    { B50,   B51,   B52,   B53,   B54 }, \
-    { KC_##B60, KC_##B61, KC_##B62, KC_##B63, KC_##B64 }, \
+    { B60,   B61,   B62,   B63,   B64 }, \
-    { KC_##B70, KC_##B71, KC_##B72, KC_##B73, KC_##B74 }, \
+    { B70,   B71,   B72,   B73,   B74 }, \
-    { KC_##B80, KC_##B81, KC_##B82, KC_##B83, KC_##B84 }  \
+    { B80,   B81,   B82,   B83,   B84 }  \
 }
 
 #endif /* KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_ */

keyboards/ergodox/infinity/matrix.c

@@ -63,6 +63,8 @@ void matrix_init(void)
 
     memset(matrix, 0, MATRIX_ROWS);
     memset(matrix_debouncing, 0, LOCAL_MATRIX_ROWS);
+
+    matrix_init_quantum();
 }
 
 uint8_t matrix_scan(void)
@@ -127,6 +129,7 @@ uint8_t matrix_scan(void)
         }
         debouncing = false;
     }
+    matrix_scan_quantum();
     return 1;
 }
 

quantum/quantum.h

@@ -25,6 +25,7 @@
 #include "led.h"
 #include "action_util.h"
 #include <stdlib.h>
+#include "print.h"
 
 
 extern uint32_t default_layer_state;

tmk_core/common/print.h

@@ -29,7 +29,9 @@
 #include <stdbool.h>
 #include "util.h"
 
-
+#if defined(PROTOCOL_CHIBIOS)
+#define PSTR(x) x
+#endif
 
 
 #ifndef NO_PRINT