Add support for PAW3204 Optical Sensor (#17669)
Co-authored-by: gompa <[email protected]> Co-authored-by: Stefan Kerkmann <[email protected]>
This commit is contained in:
6 files changed
+282
-1
No files matched your search
@@ -136,6 +136,24 @@ Also see the `POINTING_DEVICE_TASK_THROTTLE_MS`, which defaults to 10ms when usi
|
||||
|
||||
**`POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE`** is not specific to Cirque trackpad; any pointing device with a lift/contact status can integrate this gesture into its driver. e.g. PMW3360 can use Lift_Stat from Motion register. Note that `POINTING_DEVICE_MOTION_PIN` cannot be used with this feature; continuous polling of `pointing_device_get_report()` is needed to generate glide reports.
|
||||
|
||||
### PAW 3204 Sensor
|
||||
|
||||
To use the paw 3204 sensor, add this to your `rules.mk`
|
||||
|
||||
```make
|
||||
POINTING_DEVICE_DRIVER = paw3204
|
||||
```
|
||||
|
||||
The paw 3204 sensor uses a serial type protocol for communication, and requires an additional light source.
|
||||
|
||||
| Setting | Description |
|
||||
|--------------------|---------------------------------------------------------------------|
|
||||
|`PAW3204_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. |
|
||||
|`PAW3204_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. |
|
||||
|
||||
The CPI range is 400-1600, with supported values of (400, 500, 600, 800, 1000, 1200 and 1600). Defaults to 1000 CPI.
|
||||
|
||||
|
||||
### Pimoroni Trackball
|
||||
|
||||
To use the Pimoroni Trackball module, add this to your `rules.mk`:
|
||||
|
||||
Reference in new issue
Block a user